--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/goflexnet-setup.c
+ *
+ * Seagate GoFlex Net Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition goflexnet_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data goflexnet_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_led goflexnet_led_pins[] = {
+ {
+ .name = "status:green:health",
+ .default_trigger = "default-on",
+ .gpio = 46, // 0x4000
+ .active_low = 1,
+ },
+ {
+ .name = "status:orange:fault",
+ .default_trigger = "none",
+ .gpio = 47, // 0x8000
+ .active_low = 1,
+ },
+ {
+ .name = "status:white:left0",
+ .default_trigger = "none",
+ .gpio = 42, // 0x0400
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:left1",
+ .default_trigger = "none",
+ .gpio = 43, // 0x0800
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:left2",
+ .default_trigger = "none",
+ .gpio = 44, // 0x1000
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:left3",
+ .default_trigger = "none",
+ .gpio = 45, // 0x2000
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right0",
+ .default_trigger = "none",
+ .gpio = 38, // 0x0040
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right1",
+ .default_trigger = "none",
+ .gpio = 39, // 0x0080
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right2",
+ .default_trigger = "none",
+ .gpio = 40, // 0x0100
+ .active_low = 0,
+ },
+ {
+ .name = "status:white:right3",
+ .default_trigger = "none",
+ .gpio = 41, // 0x0200
+ .active_low = 0,
+ }
+};
+
+static struct gpio_led_platform_data goflexnet_led_data = {
+ .leds = goflexnet_led_pins,
+ .num_leds = ARRAY_SIZE(goflexnet_led_pins),
+};
+
+static struct platform_device goflexnet_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &goflexnet_led_data,
+ }
+};
+
+static unsigned int goflexnet_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP47_GPIO, /* LED Orange */
+ MPP46_GPIO, /* LED Green */
+ MPP45_GPIO, /* LED Left Capacity 3 */
+ MPP44_GPIO, /* LED Left Capacity 2 */
+ MPP43_GPIO, /* LED Left Capacity 1 */
+ MPP42_GPIO, /* LED Left Capacity 0 */
+ MPP41_GPIO, /* LED Right Capacity 3 */
+ MPP40_GPIO, /* LED Right Capacity 2 */
+ MPP39_GPIO, /* LED Right Capacity 1 */
+ MPP38_GPIO, /* LED Right Capacity 0 */
+ 0
+};
+
+static void __init goflexnet_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(goflexnet_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40);
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&goflexnet_ge00_data);
+ kirkwood_sata_init(&goflexnet_sata_data);
+
+ platform_device_register(&goflexnet_leds);
+}
+
+MACHINE_START(GOFLEXNET, "Seagate GoFlex Net")
+ /* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
+ .atag_offset = 0x100,
+ .init_machine = goflexnet_init,
+ .map_io = kirkwood_map_io,
+ .init_early = kirkwood_init_early,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
+MACHINE_END
projects / openwrt.git / blobdiff