brcm63xx: F@ST2504n board support (Linux-3.8.12)

[openwrt.git] / target / linux / brcm63xx / patches-3.8 / 536-board_fast2504n.patch

diff --git a/target/linux/brcm63xx/patches-3.8/536-board_fast2504n.patch b/target/linux/brcm63xx/patches-3.8/536-board_fast2504n.patch
new file mode 100644 (file)
index 0000000..7b9e240
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/536-board_fast2504n.patch
@@ -0,0 +1,107 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -3507,6 +3507,96 @@ static struct board_info __initdata boar
+       .devs = nb6_devices,
+       .num_devs = ARRAY_SIZE(nb6_devices),
+ };
++
++static struct board_info __initdata board_fast2504n = {
++      .name                           = "F@ST2504n",
++      .expected_cpu_id                = 0x6362,
++
++      .has_uart0                      = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "port1",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "port2",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "port3",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "port4",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "fast2504n:orange:power",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:green:power",
++                      .gpio           = 10,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "fast2504n:red:internet",
++                      .gpio           = 26,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:green:ok",
++                      .gpio           = 28,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:orange:ok",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "fast2504n:orange:wlan",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 24,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 25,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++                      .active_low     = 1,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -3717,6 +3807,7 @@ static const struct board_info __initcon
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6362
+       &board_nb6,
++      &board_fast2504n,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6368