brcm63xx: add preliminary support for 3.13

[openwrt.git] / target / linux / brcm63xx / patches-3.13 / 535-board_rta770w.patch

diff --git a/target/linux/brcm63xx/patches-3.13/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.13/535-board_rta770w.patch
new file mode 100644 (file)
index 0000000..6e0cd69
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.13/535-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -776,6 +776,60 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++      .name                           = "RTA770W",
++      .expected_cpu_id                = 0x6345,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "RTA770W:green:usb",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:adsl",
++                      .gpio           = 8,
++              },
++              {
++                      .name           = "RTA770W:green:diag",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:wlan",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 13,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -3788,6 +3842,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+       &board_rta770bw,
++      &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,