-bgmac: make bgmac work on systems without nvram
+These are some hackish patches to make the Ethernet driver work somehow
+on this arm core.
+The flash driver is not working, so we removed the nvram reading, this
+should be changed after we have a flash driver.
+The mdelay(1) is a ugly workaround for this arm chip, this seams to be a dma problem.
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac.c | 4 ++++
- 1 file changed, 4 insertions(+)
+The PHY says it is not connected by default, just ignore it.
+--- a/drivers/net/ethernet/broadcom/Kconfig
++++ b/drivers/net/ethernet/broadcom/Kconfig
+@@ -132,7 +132,7 @@ config BNX2X_SRIOV
+
+ config BGMAC
+ tristate "BCMA bus GBit core support"
+- depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
++ depends on BCMA_HOST_SOC && HAS_DMA
+ select PHYLIB
+ ---help---
+ This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -17,7 +17,11 @@
static const struct bcma_device_id bgmac_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
+@@ -1452,7 +1456,7 @@ static int bgmac_probe(struct bcma_devic
+ int err;
+
+ /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
+- if (core->core_unit > 1) {
++ if (core->core_unit > 0) {
+ pr_err("Unsupported core_unit %d\n", core->core_unit);
+ return -ENOTSUPP;
+ }
+@@ -1487,8 +1491,7 @@ static int bgmac_probe(struct bcma_devic
+ }
+ bgmac->cmn = core->bus->drv_gmac_cmn.core;
+
+- bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
+- sprom->et0phyaddr;
++ bgmac->phyaddr = BGMAC_PHY_NOREGS; // core->core_unit ? sprom->et1phyaddr : sprom->et0phyaddr;
+ bgmac->phyaddr &= BGMAC_PHY_MASK;
+ if (bgmac->phyaddr == BGMAC_PHY_MASK) {
+ bgmac_err(bgmac, "No PHY found\n");
+@@ -1540,8 +1543,7 @@ static int bgmac_probe(struct bcma_devic
+ /* TODO: reset the external phy. Specs are needed */
+ bgmac_phy_reset(bgmac);
+
+- bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
+- BGMAC_BFL_ENETROBO);
++ bgmac->has_robosw = 1;
+ if (bgmac->has_robosw)
+ bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -814,7 +814,7 @@ int genphy_update_link(struct phy_device
+ return status;
+
+ if ((status & BMSR_LSTATUS) == 0)
+- phydev->link = 0;
++ phydev->link = 1;
+ else
+ phydev->link = 1;
+