ar71xx: use the tp-link parser on the tp-link boards
[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wrt160nl.c
index 799f9f79647d7f394885999cce56c9ccc748aeac..0cc560a40ccd0e8a8625a0a9de5a39ee9d17436f 100644 (file)
@@ -8,9 +8,6 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
 #include <asm/mach-ar71xx/ar71xx.h>
 
 #include "machtype.h"
 #define WRT160NL_NVRAM_ADDR    0x1f7e0000
 #define WRT160NL_NVRAM_SIZE    0x10000
 
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition wrt160nl_partitions[] = {
-       {
-               .name           = "u-boot",
-               .offset         = 0,
-               .size           = 0x040000,
-               .mask_flags     = MTD_WRITEABLE,
-       }, {
-               .name           = "kernel",
-               .offset         = 0x040000,
-               .size           = 0x0e0000,
-       }, {
-               .name           = "filesytem",
-               .offset         = 0x120000,
-               .size           = 0x6c0000,
-       }, {
-               .name           = "nvram",
-               .offset         = 0x7e0000,
-               .size           = 0x010000,
-               .mask_flags     = MTD_WRITEABLE,
-       }, {
-               .name           = "ART",
-               .offset         = 0x7f0000,
-               .size           = 0x010000,
-               .mask_flags     = MTD_WRITEABLE,
-       }, {
-               .name           = "firmware",
-               .offset         = 0x040000,
-               .size           = 0x7a0000,
-       }
+static const char *wrt160nl_part_probes[] = {
+       "wrt160nl",
+       NULL,
 };
-#endif /* CONFIG_MTD_PARTITIONS */
 
 static struct flash_platform_data wrt160nl_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
-       .parts          = wrt160nl_partitions,
-       .nr_parts       = ARRAY_SIZE(wrt160nl_partitions),
-#endif
+       .part_probes    = wrt160nl_part_probes,
 };
 
 static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
@@ -127,7 +93,7 @@ static void __init wrt160nl_setup(void)
                ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
        }
 
-       ar71xx_add_device_mdio(0x0);
+       ar71xx_add_device_mdio(0, 0x0);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth0_data.phy_mask = 0x01;