ar71xx: use the tp-link parser on the tp-link boards

[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-mzk-w300nh.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
index b84038489c1423eb2a3a6ec61e99fe282b22d0dd..98b3f009263c42f737e952072b47222c1ed29963 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c
@@ -17,7 +17,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
@@ -31,7 +31,8 @@
 #define MZK_W300NH_GPIO_BTN_WPS                12
 #define MZK_W300NH_GPIO_BTN_RESET      21
 
-#define MZK_W04NU_BUTTONS_POLL_INTERVAL        20
+#define MZK_W300NH_KEYS_POLL_INTERVAL  20      /* msecs */
+#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition mzk_w300nh_partitions[] = {
@@ -74,48 +75,48 @@ static struct flash_platform_data mzk_w300nh_flash_data = {
 
 static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
        {
-               .name           = "mzk-w300nh:green:status",
+               .name           = "planex:green:status",
                .gpio           = MZK_W300NH_GPIO_LED_STATUS,
                .active_low     = 1,
        }, {
-               .name           = "mzk-w300nh:blue:wps",
+               .name           = "planex:blue:wps",
                .gpio           = MZK_W300NH_GPIO_LED_WPS,
                .active_low     = 1,
        }, {
-               .name           = "mzk-w300nh:green:wlan",
+               .name           = "planex:green:wlan",
                .gpio           = MZK_W300NH_GPIO_LED_WLAN,
                .active_low     = 1,
        }, {
-               .name           = "mzk-w300nh:green:ap",
+               .name           = "planex:green:ap",
                .gpio           = MZK_W300NH_GPIO_LED_AP,
                .active_low     = 1,
        }, {
-               .name           = "mzk-w300nh:green:router",
+               .name           = "planex:green:router",
                .gpio           = MZK_W300NH_GPIO_LED_ROUTER,
                .active_low     = 1,
        }
 };
 
-static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = {
+static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
                .code           = KEY_RESTART,
-               .threshold      = 3,
+               .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = MZK_W300NH_GPIO_BTN_RESET,
                .active_low     = 1,
        }, {
                .desc           = "wps",
                .type           = EV_KEY,
                .code           = KEY_WPS_BUTTON,
-               .threshold      = 3,
+               .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = MZK_W300NH_GPIO_BTN_WPS,
                .active_low     = 1,
        }, {
                .desc           = "aprouter",
                .type           = EV_KEY,
                .code           = BTN_2,
-               .threshold      = 3,
+               .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = MZK_W300NH_GPIO_BTN_APROUTER,
                .active_low     = 0,
        }
@@ -128,7 +129,7 @@ static void __init mzk_w300nh_setup(void)
 {
        u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
-       ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK);
+       ar71xx_add_device_mdio(0, MZK_W300NH_MDIO_MASK);
 
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0);
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
@@ -148,10 +149,10 @@ static void __init mzk_w300nh_setup(void)
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
                                        mzk_w300nh_leds_gpio);
 
-       ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
-                                       ARRAY_SIZE(mzk_w300nh_gpio_buttons),
-                                       mzk_w300nh_gpio_buttons);
-       ar913x_add_device_wmac(eeprom, NULL);
+       ar71xx_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
+                                        ARRAY_SIZE(mzk_w300nh_gpio_keys),
+                                        mzk_w300nh_gpio_keys);
+       ar9xxx_add_device_wmac(eeprom, NULL);
 }
 
 MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",