ar71xx: create wndr3700 network config from uci-defaults

[openwrt.git] / target / linux / ar71xx / base-files / etc / uci-defaults / 02_network

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index a7eeab017c5cb7e772bab297ef2b0c761658bb25..dac75ae051afaf471c131c95d1ea686d8fe55a09 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -321,6 +321,46 @@ ew-dorin-router)
        ucidef_add_switch_vlan "switch0" "1" "0 2 3"
        ;;
 
+wndr3700)
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+       # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+       uci set network.@switch[-1].blinkrate='2'
+
+       ucidef_add_switch_port "switch0" "1"
+       # Port 1 controls the GREEN configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+       # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+       # 14: Link (master); 15: separate register
+       uci set network.@switch_port[-1].led='6'
+
+       ucidef_add_switch_port "switch0" "2"
+       # Port 2 controls the ORANGE configuration of LEDs for
+       # the switch and the section does not correspond to a real
+       # switch port.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+       uci set network.@switch_port[-1].led='9'
+
+       ucidef_add_switch_port "switch0" "5"
+       # Port 5 controls the configuration of the WAN LED and the
+       # section does not correspond to a real switch port.
+       #
+       # To toggle the use of green or orange LEDs for the WAN port,
+       # see the LED setting for wndr3700:green:wan in /etc/config/system.
+       #
+       # See the key above for switch port 1 for the meaning of the
+       # 'led' setting below.
+       uci set network.@switch_port[-1].led='2'
+       ;;
+
 *)
        ucidef_set_interfaces_lan_wan "eth0" "eth1"
        ;;