-- Prosody Example Configuration File
--
--- If it wasn't already obvious, -- starts a comment, and all
--- text after it on a line is ignored by Prosody.
+-- Information on configuring Prosody can be found on our
+-- website at http://prosody.im/doc/configure
--
--- The config is split into sections, a global section, and one
--- for each defined host that we serve. You can add as many host
--- sections as you like.
+-- Tip: You can check that the syntax of this file is correct
+-- when you have finished by running: luac -p prosody.cfg.lua
+-- If there are any errors, it will let you know what and where
+-- they are, otherwise it will keep quiet.
--
--- Lists are written { "like", "this", "one" }
--- Lists can also be of { 1, 2, 3 } numbers, and other things.
--- Either commas, or semi-colons; may be used
--- as seperators.
---
--- A table is a list of values, except each value has a name. An
--- example table would be:
---
--- ssl = { key = "keyfile.key", certificate = "certificate.cert" }
---
--- Whitespace (that is tabs, spaces, line breaks) is mostly
--- insignificant, so
--- can
--- be placed anywhere that you deem fitting.
---
--- Tip: You can check that the syntax of this file is correct when you
--- have finished by running: luac -p prosody.cfg.lua
--- If there are any errors, it will let you know what and where they
--- are, otherwise it will keep quiet.
---
--- The only thing left to do is rename this file to remove the .dist
--- ending, and fill in the
+-- The only thing left to do is rename this file to remove the .dist ending, and fill in the
-- blanks. Good luck, and happy Jabbering!
--- Server-wide settings go in this section
-Host "*"
-
- -- This is a (by default, empty) list of accounts that are admins for the
- -- server. Note that you must create the accounts separately (see
- -- http://prosody.im/doc/creating_accounts)
- -- Example: admins = { "user1@example.com", "user2@example.net" }
- admins = { }
-
- -- Enable use of libevent for better performance under high load
- -- For more information see: http://prosody.im/doc/libevent
- --use_libevent = true;
-
- -- This is the list of modules Prosody will load on startup. It looks for
- -- mod_modulename.lua in the plugins folder, so make sure that exists too.
- -- Documentation on modules can be found at: http://prosody.im/doc/modules
- modules_enabled = {
- -- Generally required
- "roster"; -- Allow users to have a roster. Recommended ;)
- "saslauth"; -- Authentication for clients and servers. Recommended if
- -- you want to log in.
- "dialback"; -- s2s dialback support
- "disco"; -- Service discovery
- "posix"; -- POSIX functionality, daemonizes, enables syslog, etc.
-
- -- Not essential, but recommended
- "private"; -- Private XML storage (for room bookmarks, etc.)
- "vcard"; -- Allow users to set vCards
- "privacy"; -- Support privacy lists
- "tls"; -- Support for secure TLS on c2s/s2s connections
- --"compression"; -- Stream compression for client-to-server streams
-
- -- Nice to have
- "legacyauth"; -- Legacy authentication. Only used by some old
- -- clients and bots.
- "version"; -- Replies to server version requests
- "uptime"; -- Report how long server has been running
- "time"; -- Let others know the time here on this server
- "ping"; -- Replies to XMPP pings with pongs
- "pep"; -- Enables users to publish their mood, activity, playing
- -- music and more
- "register"; -- Allow users to register on this server using a client
- -- and change passwords
-
- -- Other specific functionality
- --"console"; -- telnet to port 5582
- -- (needs console_enabled = true)
- --"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
- --"httpserver"; -- Serve static files from a directory over
- -- HTTP
- --"groups"; -- Shared roster support
- --"announce"; -- Send announcement to all online users
- --"welcome"; -- Welcome users who register accounts
- --"watchregistrations"; -- Alert admins of registrations
- }
-
- -- These modules are auto-loaded, should you for (for some mad
- -- reason) want to disable them then uncomment them below.
- modules_disabled = {
- --"presence";
- --"message";
- --"iq";
- }
-
- -- Disable account creation by default, for security
- -- For more information see http://prosody.im/doc/creating_accounts
- allow_registration = false;
-
- --These are the SSL/TLS-related settings.
- --ssl = {
- -- key = "certs/localhost.key";
- -- certificate = "certs/localhost.cert";
- --}
-
- -- Require encryption on client/server connections?
- --c2s_require_encryption = false
- --s2s_require_encryption = false
-
- -- Logging configuration
- -- For advanced logging see http://prosody.im/doc/logging
- log = "prosody.log";
- debug = false; -- Log debug messages?
-
--- This allows clients to connect to localhost. No harm in it.
-Host "localhost"
-
--- Section for example.com
--- (replace example.com with your domain name)
-Host "example.com"
- enabled = false -- This will disable the host, preserving the config, but
- -- denying connections (remove to enable!)
-
- -- Assign this host a certificate for TLS, otherwise it would use the one
- -- set in the global section (if any). Note that old-style SSL on port 5223
- -- only supports one certificate, and will always use the global one.
- --ssl = {
- -- key = "certs/example.com.key";
- -- certificate = "certs/example.com.crt";
- --}
-
--- Set up a MUC (multi-user chat) room server on conference.example.com:
+
+---------- Server-wide settings ----------
+-- Settings in this section apply to the whole server and are the default settings
+-- for any virtual hosts
+
+-- This is a (by default, empty) list of accounts that are admins
+-- for the server. Note that you must create the accounts separately
+-- (see http://prosody.im/doc/creating_accounts for info)
+-- Example: admins = { "user1@example.com", "user2@example.net" }
+admins = { }
+
+-- Enable use of libevent for better performance under high load
+-- For more information see: http://prosody.im/doc/libevent
+--use_libevent = true;
+
+-- This is the list of modules Prosody will load on startup.
+-- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
+-- Documentation on modules can be found at: http://prosody.im/doc/modules
+modules_enabled = {
+
+ -- Generally required
+ "roster"; -- Allow users to have a roster. Recommended ;)
+ "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
+ "tls"; -- Add support for secure TLS on c2s/s2s connections
+ "dialback"; -- s2s dialback support
+ "disco"; -- Service discovery
+
+ -- Not essential, but recommended
+ "private"; -- Private XML storage (for room bookmarks, etc.)
+ "vcard"; -- Allow users to set vCards
+ --"privacy"; -- Support privacy lists
+ --"compression"; -- Stream compression
+
+ -- Nice to have
+ "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
+ "version"; -- Replies to server version requests
+ "uptime"; -- Report how long server has been running
+ "time"; -- Let others know the time here on this server
+ "ping"; -- Replies to XMPP pings with pongs
+ "pep"; -- Enables users to publish their mood, activity, playing music and more
+ "register"; -- Allow users to register on this server using a client and change passwords
+ "adhoc"; -- Support for "ad-hoc commands" that can be executed with an XMPP client
+
+ -- Admin interfaces
+ "admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
+ --"admin_telnet"; -- Opens telnet console interface on localhost port 5582
+
+ -- Other specific functionality
+ --"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.
+ --"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
+ --"httpserver"; -- Serve static files from a directory over HTTP
+ --"groups"; -- Shared roster support
+ --"announce"; -- Send announcement to all online users
+ --"welcome"; -- Welcome users who register accounts
+ --"watchregistrations"; -- Alert admins of registrations
+ --"motd"; -- Send a message to users when they log in
+};
+
+-- These modules are auto-loaded, should you
+-- (for some mad reason) want to disable
+-- them then uncomment them below
+modules_disabled = {
+ -- "presence"; -- Route user/contact status information
+ -- "message"; -- Route messages
+ -- "iq"; -- Route info queries
+ -- "offline"; -- Store offline messages
+};
+
+-- Disable account creation by default, for security
+-- For more information see http://prosody.im/doc/creating_accounts
+allow_registration = false;
+
+-- These are the SSL/TLS-related settings. If you don't want
+-- to use SSL/TLS, you may comment or remove this
+ssl = {
+ key = "certs/localhost.key";
+ certificate = "certs/localhost.cert";
+}
+
+-- Only allow encrypted streams? Encryption is already used when
+-- available. These options will cause Prosody to deny connections that
+-- are not encrypted. Note that some servers do not support s2s
+-- encryption or have it disabled, including gmail.com and Google Apps
+-- domains.
+
+--c2s_require_encryption = false
+--s2s_require_encryption = false
+
+-- Select the authentication backend to use. The 'internal' providers
+-- use Prosody's configured data storage to store the authentication data.
+-- To allow Prosody to offer secure authentication mechanisms to clients, the
+-- default provider stores passwords in plaintext. If you do not trust your
+-- server please see http://prosody.im/doc/modules/mod_auth_internal_hashed
+-- for information about using the hashed backend.
+
+authentication = "internal_plain"
+
+-- Select the storage backend to use. By default Prosody uses flat files
+-- in its configured data directory, but it also supports more backends
+-- through modules. An "sql" backend is included by default, but requires
+-- additional dependencies. See http://prosody.im/doc/storage for more info.
+
+--storage = "sql" -- Default is "internal"
+
+-- For the "sql" backend, you can uncomment *one* of the below to configure:
+--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
+--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
+--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
+
+-- Logging configuration
+-- For advanced logging see http://prosody.im/doc/logging
+log = {
+ info = "prosody.log"; -- Change 'info' to 'debug' for verbose logging
+ error = "prosody.err";
+ -- "*syslog"; -- Uncomment this for logging to syslog
+ -- "*console"; -- Log to the console, useful for debugging with daemonize=false
+}
+
+----------- Virtual hosts -----------
+-- You need to add a VirtualHost entry for each domain you wish Prosody to serve.
+-- Settings under each VirtualHost entry apply *only* to that host.
+
+VirtualHost "localhost"
+
+VirtualHost "example.com"
+ enabled = false -- Remove this line to enable this host
+
+ -- Assign this host a certificate for TLS, otherwise it would use the one
+ -- set in the global section (if any).
+ -- Note that old-style SSL on port 5223 only supports one certificate, and will always
+ -- use the global one.
+ ssl = {
+ key = "certs/example.com.key";
+ certificate = "certs/example.com.crt";
+ }
+
+------ Components ------
+-- You can specify components to add hosts that provide special services,
+-- like multi-user conferences, and transports.
+-- For more information on components, see http://prosody.im/doc/components
+
+---Set up a MUC (multi-user chat) room server on conference.example.com:
--Component "conference.example.com" "muc"
-- Set up a SOCKS5 bytestream proxy for server-proxied file transfers:
---Component "proxy.example.com "proxy65"
+--Component "proxy.example.com" "proxy65"
+
+---Set up an external component (default component port is 5347)
+--
+-- External components allow adding various services, such as gateways/
+-- transports to other networks like ICQ, MSN and Yahoo. For more info
+-- see: http://prosody.im/doc/components#adding_an_external_component
+--
+--Component "gateway.example.com"
+-- component_secret = "password"
projects / prosody.git / blobdiff