--- Prosody Example Configuration File
---
--- If it wasn't already obvious, -- starts a comment, and all
--- text after it is ignored by Prosody.
---
--- The config is split into sections, a global section, and one
--- for each defined host that we serve. You can add as many host
--- sections as you like.
---
--- Lists are written { "like", "this", "one" }
--- Lists can also be of { 1, 2, 3 } numbers, etc.
--- Either commas, or semi-colons; may be used
--- as seperators.
---
--- A table is a list of values, except each value has a name. An
--- example would be:
---
--- logging = { type = "html", directory = "/var/logs", rotate = "daily" }
---
--- Whitespace (that is tabs, spaces, line breaks) is insignificant, so can
--- be placed anywhere
--- that you deem fitting. Youcouldalsoremoveitentirely,butforobviousrea
---sonsIdon'trecommendit.
---
--- Tip: You can check that the syntax of this file is correct when you have finished
--- by running: luac -p prosody.cfg.lua
--- If there are any errors, it will let you know what and where they are, otherwise it
--- will keep quiet.
---
--- The only thing left to do is rename this file to remove the .dist ending, and fill in the
--- blanks. Good luck, and happy Jabbering!
-
--- Global settings go in this section
-Host "*"
-
- -- This is the list of modules Prosody will load on startup.
- -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.
- modules_enabled = {
- "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
- "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
- "roster"; -- Allow users to have a roster. Recommended ;)
- "register"; -- Allow users to register on this server using a client
- "tls"; -- Add support for secure TLS on c2s/s2s connections
- "vcard"; -- Allow users to set vCards
- "private"; -- Private XML storage (for room bookmarks, etc.)
- "version"; -- Replies to server version requests
- "dialback"; -- s2s dialback support
- "disco"; -- Service discovery
- "ping"; -- XMPP Ping
- "time"; -- Let others know the time here
- "uptime"; -- Uptime reporting
- "console"; -- telnet to port 5528 (needs console_enabled = true)
- };
-
- -- These are the SSL/TLS-related settings. If you don't want
- -- to use SSL/TLS, you may comment or remove this
- ssl = {
- key = "certs/localhost.key";
- certificate = "certs/localhost.cert";
- }
-
--- This allows clients to connect to localhost. No harm in it.
-Host "localhost"
-
--- Section for example.com
--- (replace example.com with your domain name)
-Host "example.com"
- -- Assign this host a certificate for TLS, otherwise it would use the one
- -- set in the global section (if any).
- -- Note that old-style SSL on port 5223 only supports one certificate, and will always
- -- use the global one.
- ssl = {
- key = "certs/example.com.key";
- certificate = "certs/example.com.crt";
- }
-
- enabled = false -- This will disable the host, preserving the config, but denying connections
-
+-- Prosody Example Configuration File \r
+-- \r
+-- If it wasn't already obvious, -- starts a comment, and all \r
+-- text after it on a line is ignored by Prosody.\r
+--\r
+-- The config is split into sections, a global section, and one \r
+-- for each defined host that we serve. You can add as many host \r
+-- sections as you like.\r
+--\r
+-- Lists are written { "like", "this", "one" } \r
+-- Lists can also be of { 1, 2, 3 } numbers, and other things. \r
+-- Either commas, or semi-colons; may be used\r
+-- as seperators.\r
+--\r
+-- A table is a list of values, except each value has a name. An \r
+-- example table would be:\r
+--\r
+-- ssl = { key = "keyfile.key", certificate = "certificate.cert" }\r
+--\r
+-- Whitespace (that is tabs, spaces, line breaks) is mostly insignificant, so \r
+-- can \r
+-- be placed anywhere that you deem fitting.\r
+--\r
+-- Tip: You can check that the syntax of this file is correct when you have finished\r
+-- by running: luac -p prosody.cfg.lua\r
+-- If there are any errors, it will let you know what and where they are, otherwise it \r
+-- will keep quiet.\r
+--\r
+-- The only thing left to do is rename this file to remove the .dist ending, and fill in the \r
+-- blanks. Good luck, and happy Jabbering!\r
+\r
+-- Server-wide settings go in this section\r
+Host "*"\r
+ \r
+ -- This is the list of modules Prosody will load on startup.\r
+ -- It looks for mod_modulename.lua in the plugins folder, so make sure that exists too.\r
+ modules_enabled = {\r
+ -- Generally required\r
+ "roster"; -- Allow users to have a roster. Recommended ;)\r
+ "saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.\r
+ "tls"; -- Add support for secure TLS on c2s/s2s connections\r
+ "dialback"; -- s2s dialback support\r
+ "disco"; -- Service discovery\r
+ \r
+ -- Not essential, but recommended\r
+ "private"; -- Private XML storage (for room bookmarks, etc.)\r
+ "vcard"; -- Allow users to set vCards\r
+ \r
+ -- Nice to have\r
+ "legacyauth"; -- Legacy authentication. Only used by some old clients and bots.\r
+ "version"; -- Replies to server version requests\r
+ "uptime"; -- Report how long server has been running\r
+ "time"; -- Let others know the time here on this server\r
+ "ping"; -- Replies to XMPP pings with pongs\r
+ "pep"; -- Enables users to publish their mood, activity, playing music and more\r
+ "register"; -- Allow users to register on this server using a client and change passwords\r
+\r
+ -- Other specific functionality\r
+ --"posix"; -- POSIX functionality, sends server to background, enables syslog, etc.\r
+ --"console"; -- telnet to port 5582 (needs console_enabled = true)\r
+ --"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"\r
+ --"httpserver"; -- Serve static files from a directory over HTTP\r
+ };\r
+ \r
+ -- These modules are auto-loaded, should you\r
+ -- for (for some mad reason) want to disable\r
+ -- them then uncomment them below\r
+ modules_disabled = {\r
+ -- "presence";\r
+ -- "message";\r
+ -- "iq";\r
+ };\r
+\r
+ -- Disable account creation by default, for security\r
+ -- For more information see http://prosody.im/doc/creating_accounts\r
+ allow_registration = false;\r
+ \r
+ -- These are the SSL/TLS-related settings. If you don't want\r
+ -- to use SSL/TLS, you may comment or remove this\r
+ ssl = { \r
+ key = "certs/localhost.key";\r
+ certificate = "certs/localhost.cert";\r
+ }\r
+\r
+-- This allows clients to connect to localhost. No harm in it.\r
+Host "localhost"\r
+\r
+-- Section for example.com\r
+-- (replace example.com with your domain name)\r
+Host "example.com"\r
+\r
+ enabled = false -- This will disable the host, preserving the config, but denying connections\r
+\r
+ -- Assign this host a certificate for TLS, otherwise it would use the one\r
+ -- set in the global section (if any).\r
+ -- Note that old-style SSL on port 5223 only supports one certificate, and will always\r
+ -- use the global one.\r
+ ssl = { \r
+ key = "certs/example.com.key";\r
+ certificate = "certs/example.com.crt";\r
+ }\r
+\r
+-- Set up a MUC (multi-user chat) room server on conference.example.com:\r
+Component "conference.example.com" "muc"\r
projects / prosody.git / blobdiff