diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig
--- linux-2.6.12.5/arch/mips/Kconfig 2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/Kconfig 2005-08-28 16:21:04.700803432 +0200
++++ linux-2.6.12.5-brcm/arch/mips/Kconfig 2005-09-03 21:53:36.323284896 +0200
@@ -40,6 +40,15 @@
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
Olivetti M700-10 workstations.
config CPU_LITTLE_ENDIAN
bool "Generate little endian code"
- default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-+ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA || BCM47XX
++ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA || BCM947XX
default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
help
Some MIPS machines can be configured for either little or big endian
-diff -Nur linux-2.6.12.5/arch/mips/Kconfig.orig linux-2.6.12.5-brcm/arch/mips/Kconfig.orig
---- linux-2.6.12.5/arch/mips/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/Kconfig.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,1662 @@
-+config MIPS
-+ bool
-+ default y
-+ # Horrible source of confusion. Die, die, die ...
-+ select EMBEDDED
-+
-+config MIPS64
-+ bool "64-bit kernel"
-+ help
-+ Select this option if you want to build a 64-bit kernel. You should
-+ only select this option if you have hardware that actually has a
-+ 64-bit processor and if your application will actually benefit from
-+ 64-bit processing, otherwise say N. You must say Y for kernels for
-+ SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N.
-+
-+config 64BIT
-+ def_bool MIPS64
+diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile
+--- linux-2.6.12.5/arch/mips/Makefile 2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/Makefile 2005-09-03 22:24:07.794917120 +0200
+@@ -79,7 +79,7 @@
+ cflags-y += -I $(TOPDIR)/include/asm/gcc
+ cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y += $(call cc-option, -finline-limit=100000)
+-LDFLAGS_vmlinux += -G 0 -static -n
++LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
+ MODFLAGS += -mlong-calls
+
+ cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
+@@ -170,6 +170,7 @@
+ cflags-$(CONFIG_CPU_MIPS32) += \
+ $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
+ -Wa,--trap
++cflags-$(CONFIG_CPU_MIPS32) += -Wa,--trap
+
+ cflags-$(CONFIG_CPU_MIPS64) += \
+ $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
+@@ -618,6 +619,14 @@
+ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
+
+ #
++# Broadcom BCM47XX boards
++#
++core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/
++cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include
++load-$(CONFIG_BCM947XX) := 0xffffffff80001000
+
-+config MIPS32
-+ bool
-+ depends on MIPS64 = 'n'
-+ default y
+
-+mainmenu "Linux/MIPS Kernel Configuration"
++#
+ # SNI RM200 PCI
+ #
+ core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile
+--- linux-2.6.12.5/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile 2005-08-28 11:12:20.406862800 +0200
+@@ -0,0 +1,6 @@
++#
++# Makefile for the BCM47xx specific kernel interface routines
++# under Linux.
++#
+
-+source "init/Kconfig"
++obj-y := irq.o int-handler.o prom.o setup.o time.o
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile 2005-08-28 11:12:20.407862648 +0200
+@@ -0,0 +1,6 @@
++#
++# Makefile for the BCM47xx specific kernel interface routines
++# under Linux.
++#
+
-+menu "Machine selection"
++obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c 2005-08-28 11:12:20.408862496 +0200
+@@ -0,0 +1,685 @@
++/*
++ * Misc useful routines to access NIC SROM
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmsrom.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
+
-+config MACH_JAZZ
-+ bool "Support for the Jazz family of machines"
-+ select ARC
-+ select ARC32
-+ select GENERIC_ISA_DMA
-+ select I8259
-+ select ISA
-+ help
-+ This a family of machines based on the MIPS R4030 chipset which was
-+ used by several vendors to build RISC/os and Windows NT workstations.
-+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
-+ Olivetti M700-10 workstations.
-+
-+config ACER_PICA_61
-+ bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
-+ depends on MACH_JAZZ && EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ help
-+ This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-+ kernel that runs on these, say Y here. For details about Linux on
-+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+ <http://www.linux-mips.org/>.
-+
-+config MIPS_MAGNUM_4000
-+ bool "Support for MIPS Magnum 4000"
-+ depends on MACH_JAZZ
-+ select DMA_NONCOHERENT
-+ help
-+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
-+ kernel that runs on these, say Y here. For details about Linux on
-+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+ <http://www.linux-mips.org/>.
-+
-+config OLIVETTI_M700
-+ bool "Support for Olivetti M700-10"
-+ depends on MACH_JAZZ
-+ select DMA_NONCOHERENT
-+ help
-+ This is a machine with a R4000 100 MHz CPU. To compile a Linux
-+ kernel that runs on these, say Y here. For details about Linux on
-+ the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+ <http://www.linux-mips.org/>.
-+
-+config MACH_VR41XX
-+ bool "Support for NEC VR41XX-based machines"
-+
-+config NEC_CMBVR4133
-+ bool "Support for NEC CMB-VR4133"
-+ depends on MACH_VR41XX
-+ select CPU_VR41XX
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select HW_HAS_PCI
-+ select PCI_VR41XX
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmsrom.h>
++#include <bcmdevs.h>
++#include <bcmendian.h>
++#include <sbpcmcia.h>
++#include <pcicfg.h>
+
-+config ROCKHOPPER
-+ bool "Support for Rockhopper baseboard"
-+ depends on NEC_CMBVR4133
-+ select I8259
-+ select HAVE_STD_PC_SERIAL_PORT
++#include <proto/ethernet.h> /* for sprom content groking */
+
-+config CASIO_E55
-+ bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select ISA
++#define VARS_MAX 4096 /* should be reduced */
+
-+config IBM_WORKPAD
-+ bool "Support for IBM WorkPad z50"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select ISA
++static int initvars_srom_pci(void *curmap, char **vars, int *count);
++static int initvars_cis_pcmcia(void *osh, char **vars, int *count);
++static int sprom_cmd_pcmcia(void *osh, uint8 cmd);
++static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data);
++static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data);
++static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc);
+
-+config TANBAC_TB0226
-+ bool "Support for TANBAC TB0226 (Mbase)"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ help
-+ The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
-+ Please refer to <http://www.tanbac.co.jp/> about Mbase.
++/*
++ * Initialize the vars from the right source for this platform.
++ * Return 0 on success, nonzero on error.
++ */
++int
++srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count)
++{
++ if (vars == NULL)
++ return (0);
+
-+config TANBAC_TB0229
-+ bool "Support for TANBAC TB0229 (VR4131DIMM)"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ help
-+ The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
-+ Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM.
++ switch (bus) {
++ case SB_BUS:
++ /* These two could be asserts ... */
++ *vars = NULL;
++ *count = 0;
++ return(0);
+
-+config VICTOR_MPC30X
-+ bool "Support for Victor MP-C303/304"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ depends on MACH_VR41XX
++ case PCI_BUS:
++ ASSERT(curmap); /* can not be NULL */
++ return(initvars_srom_pci(curmap, vars, count));
+
-+config ZAO_CAPCELLA
-+ bool "Support for ZAO Networks Capcella"
-+ depends on MACH_VR41XX
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
++ case PCMCIA_BUS:
++ return(initvars_cis_pcmcia(osh, vars, count));
+
-+config PCI_VR41XX
-+ bool "Add PCI control unit support of NEC VR4100 series"
-+ depends on MACH_VR41XX && PCI
-+
-+config VRC4171
-+ tristate "Add NEC VRC4171 companion chip support"
-+ depends on MACH_VR41XX && ISA
-+ ---help---
-+ The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
-+
-+config VRC4173
-+ tristate "Add NEC VRC4173 companion chip support"
-+ depends on MACH_VR41XX && PCI_VR41XX
-+ ---help---
-+ The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
-+
-+config TOSHIBA_JMR3927
-+ bool "Support for Toshiba JMR-TX3927 board"
-+ depends on MIPS32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
+
-+config MIPS_COBALT
-+ bool "Support for Cobalt Server (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select I8259
-+ select IRQ_CPU
++ default:
++ ASSERT(0);
++ }
++ return (-1);
++}
+
-+config MACH_DECSTATION
-+ bool "Support for DECstations"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ depends on MIPS32 || EXPERIMENTAL
-+ ---help---
-+ This enables support for DEC's MIPS based workstations. For details
-+ see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
-+ DECstation porting pages on <http://decstation.unix-ag.org/>.
+
-+ If you have one of the following DECstation Models you definitely
-+ want to choose R4xx0 for the CPU Type:
++/* support only 16-bit word read from srom */
++int
++srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++ void *srom;
++ uint i, off, nw;
+
-+ DECstation 5000/50
-+ DECstation 5000/150
-+ DECstation 5000/260
-+ DECsystem 5900/260
++ /* check input - 16-bit access only */
++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++ return 1;
+
-+ otherwise choose R3000.
++ if (bus == PCI_BUS) {
++ if (!curmap)
++ return 1;
++ srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
++ if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE))
++ return 1;
++ } else if (bus == PCMCIA_BUS) {
++ off = byteoff / 2;
++ nw = nbytes / 2;
++ for (i = 0; i < nw; i++) {
++ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
++ return 1;
++ }
++ } else {
++ return 1;
++ }
+
-+config MIPS_EV64120
-+ bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select MIPS_GT64120
-+ help
-+ This is an evaluation board based on the Galileo GT-64120
-+ single-chip system controller that contains a MIPS R5000 compatible
-+ core running at 75/100MHz. Their website is located at
-+ <http://www.marvell.com/>. Say Y here if you wish to build a
-+ kernel for this platform.
-+
-+config EVB_PCI1
-+ bool "Enable Second PCI (PCI1)"
-+ depends on MIPS_EV64120
-+
-+config MIPS_EV96100
-+ bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select MIPS_GT96100
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ This is an evaluation board based on the Galileo GT-96100 LAN/WAN
-+ communications controllers containing a MIPS R5000 compatible core
-+ running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
-+ here if you wish to build a kernel for this platform.
++ return 0;
++}
+
-+config MIPS_IVR
-+ bool "Support for Globespan IVR board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ help
-+ This is an evaluation board built by Globespan to showcase thir
-+ iVR (Internet Video Recorder) design. It utilizes a QED RM5231
-+ R5000 MIPS core. More information can be found out their website
-+ located at <http://www.globespan.net/>. Say Y here if you wish to
-+ build a kernel for this platform.
-+
-+config LASAT
-+ bool "Support for LASAT Networks platforms"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select MIPS_GT64120
-+ select R5000_CPU_SCACHE
++/* support only 16-bit word write into srom */
++int
++srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++ uint16 *srom;
++ uint i, off, nw, crc_range;
++ uint16 image[SPROM_SIZE], *p;
++ uint8 crc;
++ volatile uint32 val32;
+
-+config PICVUE
-+ tristate "PICVUE LCD display driver"
-+ depends on LASAT
++ /* check input - 16-bit access only */
++ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++ return 1;
+
-+config PICVUE_PROC
-+ tristate "PICVUE LCD display driver /proc interface"
-+ depends on PICVUE
++ crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
+
-+config DS1603
-+ bool "DS1603 RTC driver"
-+ depends on LASAT
++ /* if changes made inside crc cover range */
++ if (byteoff < crc_range) {
++ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
++ /* read data including entire first 64 words from srom */
++ if (srom_read(bus, curmap, osh, 0, nw * 2, image))
++ return 1;
++ /* make changes */
++ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
++ /* calculate crc */
++ htol16_buf(image, crc_range);
++ crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
++ ltoh16_buf(image, crc_range);
++ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
++ p = image;
++ off = 0;
++ } else {
++ p = buf;
++ off = byteoff / 2;
++ nw = nbytes / 2;
++ }
+
-+config LASAT_SYSCTL
-+ bool "LASAT sysctl interface"
-+ depends on LASAT
++ if (bus == PCI_BUS) {
++ srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
++ /* enable writes to the SPROM */
++ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
++ val32 |= SPROM_WRITEEN;
++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
++ bcm_mdelay(500);
++ /* write srom */
++ for (i = 0; i < nw; i++) {
++ W_REG(&srom[off + i], p[i]);
++ bcm_mdelay(20);
++ }
++ /* disable writes to the SPROM */
++ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
++ } else if (bus == PCMCIA_BUS) {
++ /* enable writes to the SPROM */
++ if (sprom_cmd_pcmcia(osh, SROM_WEN))
++ return 1;
++ bcm_mdelay(500);
++ /* write srom */
++ for (i = 0; i < nw; i++) {
++ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]);
++ bcm_mdelay(20);
++ }
++ /* disable writes to the SPROM */
++ if (sprom_cmd_pcmcia(osh, SROM_WDS))
++ return 1;
++ } else {
++ return 1;
++ }
+
-+config MIPS_ITE8172
-+ bool "Support for ITE 8172G board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ help
-+ Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
-+ with ATX form factor that utilizes a MIPS R5000 to work with its
-+ ITE8172G companion internet appliance chip. The MIPS core can be
-+ either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
-+ a kernel for this platform.
-+
-+config IT8172_REVC
-+ bool "Support for older IT8172 (Rev C)"
-+ depends on MIPS_ITE8172
-+ help
-+ Say Y here to support the older, Revision C version of the Integrated
-+ Technology Express, Inc. ITE8172 SBC. Vendor page at
-+ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-+
-+config MIPS_ATLAS
-+ bool "Support for MIPS Atlas board"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select MIPS_GT64120
-+ select SWAP_IO_SPACE
-+ help
-+ This enables support for the QED R5231-based MIPS Atlas evaluation
-+ board.
++ bcm_mdelay(500);
++ return 0;
++}
+
-+config MIPS_MALTA
-+ bool "Support for MIPS Malta board"
-+ select BOOT_ELF32
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select DMA_NONCOHERENT
-+ select GENERIC_ISA_DMA
-+ select HW_HAS_PCI
-+ select I8259
-+ select MIPS_GT64120
-+ select SWAP_IO_SPACE
-+ help
-+ This enables support for the VR5000-based MIPS Malta evaluation
-+ board.
+
-+config MIPS_SEAD
-+ bool "Support for MIPS SEAD board (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select IRQ_CPU
-+ select DMA_NONCOHERENT
-+
-+config MOMENCO_OCELOT
-+ bool "Support for Momentum Ocelot board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select MIPS_GT64120
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
-+
-+config MOMENCO_OCELOT_G
-+ bool "Support for Momentum Ocelot-G board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
++int
++srom_parsecis(uint8 *cis, char **vars, int *count)
++{
++ char eabuf[32];
++ char *vp, *base;
++ uint8 tup, tlen, sromrev = 1;
++ int i, j;
++ uint varsize;
++ bool ag_init = FALSE;
++ uint16 w;
+
-+config MOMENCO_OCELOT_C
-+ bool "Support for Momentum Ocelot-C board"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_MV64340
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
++ ASSERT(vars);
++ ASSERT(count);
+
-+config MOMENCO_OCELOT_3
-+ bool "Support for Momentum Ocelot-3 board"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select IRQ_MV64340
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Ocelot-3 is based off Discovery III System Controller and
-+ PMC-Sierra Rm79000 core.
++ base = vp = MALLOC(VARS_MAX);
++ ASSERT(vp);
+
-+config MOMENCO_JAGUAR_ATX
-+ bool "Support for Momentum Jaguar board"
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select IRQ_MV64340
-+ select LIMITED_DMA
-+ select PCI_MARVELL
-+ select RM7000_CPU_SCACHE
-+ select SWAP_IO_SPACE
-+ help
-+ The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
-+ Momentum Computer <http://www.momenco.com/>.
++ i = 0;
++ do {
++ tup = cis[i++];
++ tlen = cis[i++];
+
-+config JAGUAR_DMALOW
-+ bool "Low DMA Mode"
-+ depends on MOMENCO_JAGUAR_ATX
-+ help
-+ Select to Y if jump JP5 is set on your board, N otherwise. Normally
-+ the jumper is set, so if you feel unsafe, just say Y.
++ switch (tup) {
++ case CISTPL_MANFID:
++ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
++ vp++;
++ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
++ vp++;
++ break;
+
-+config PMC_YOSEMITE
-+ bool "Support for PMC-Sierra Yosemite eval board"
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select IRQ_CPU_RM7K
-+ select IRQ_CPU_RM9K
-+ select SWAP_IO_SPACE
-+ help
-+ Yosemite is an evaluation board for the RM9000x2 processor
-+ manufactured by PMC-Sierra
++ case CISTPL_FUNCE:
++ if (cis[i] == LAN_NID) {
++ ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
++ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
++ vp += sprintf(vp, "il0macaddr=%s", eabuf);
++ vp++;
++ }
++ break;
+
-+config HYPERTRANSPORT
-+ bool "Hypertransport Support for PMC-Sierra Yosemite"
-+ depends on PMC_YOSEMITE
++ case CISTPL_CFTABLE:
++ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
++ vp++;
++ break;
+
-+config DDB5074
-+ bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select I8259
-+ select ISA
-+ help
-+ This enables support for the VR5000-based NEC DDB Vrc-5074
-+ evaluation board.
++ case CISTPL_BRCM_HNBU:
++ switch (cis[i]) {
++ case HNBU_CHIPID:
++ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
++ vp++;
++ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]);
++ vp++;
++ if (tlen == 7) {
++ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]);
++ vp++;
++ }
++ break;
+
-+config DDB5476
-+ bool "Support for NEC DDB Vrc-5476"
-+ select DMA_NONCOHERENT
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select I8259
-+ select ISA
-+ help
-+ This enables support for the R5432-based NEC DDB Vrc-5476
-+ evaluation board.
++ case HNBU_BOARDREV:
++ vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
++ vp++;
++ break;
+
-+ Features : kernel debugging, serial terminal, NFS root fs, on-board
-+ ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
-+ IDE controller, PS2 keyboard, PS2 mouse, etc.
++ case HNBU_AA:
++ vp += sprintf(vp, "aa0=%d", cis[i + 1]);
++ vp++;
++ break;
+
-+config DDB5477
-+ bool "Support for NEC DDB Vrc-5477"
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select I8259
-+ select IRQ_CPU
-+ help
-+ This enables support for the R5432-based NEC DDB Vrc-5477,
-+ or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
++ case HNBU_AG:
++ vp += sprintf(vp, "ag0=%d", cis[i + 1]);
++ vp++;
++ ag_init = TRUE;
++ break;
+
-+ Features : kernel debugging, serial terminal, NFS root fs, on-board
-+ ether port USB, AC97, PCI, etc.
++ case HNBU_CC:
++ vp += sprintf(vp, "cc=%d", cis[i + 1]);
++ vp++;
++ break;
+
-+config DDB5477_BUS_FREQUENCY
-+ int "bus frequency (in kHZ, 0 for auto-detect)"
-+ depends on DDB5477
-+ default 0
++ case HNBU_PAPARMS:
++ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]);
++ vp++;
++ if (tlen == 9) {
++ /* New version */
++ for (j = 0; j < 3; j++) {
++ vp += sprintf(vp, "pa0b%d=%d", j,
++ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
++ vp++;
++ }
++ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
++ vp++;
++ }
++ break;
+
-+config NEC_OSPREY
-+ bool "Support for NEC Osprey board"
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
++ case HNBU_OEM:
++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
++ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
++ vp++;
++ break;
++ case HNBU_BOARDFLAGS:
++ w = (cis[i + 2] << 8) + cis[i + 1];
++ if (w == 0xffff) w = 0;
++ vp += sprintf(vp, "boardflags=%d", w);
++ vp++;
++ break;
++ case HNBU_LED:
++ if (cis[i + 1] != 0xff) {
++ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
++ vp++;
++ }
++ if (cis[i + 2] != 0xff) {
++ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]);
++ vp++;
++ }
++ if (cis[i + 3] != 0xff) {
++ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]);
++ vp++;
++ }
++ if (cis[i + 4] != 0xff) {
++ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]);
++ vp++;
++ }
++ break;
++ }
++ break;
+
-+config SGI_IP22
-+ bool "Support for SGI IP22 (Indy/Indigo2)"
-+ select ARC
-+ select ARC32
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select IP22_CPU_SCACHE
-+ select IRQ_CPU
-+ select SWAP_IO_SPACE
-+ help
-+ This are the SGI Indy, Challenge S and Indigo2, as well as certain
-+ OEM variants like the Tandem CMN B006S. To compile a Linux kernel
-+ that runs on these, say Y here.
-+
-+config SGI_IP27
-+ bool "Support for SGI IP27 (Origin200/2000)"
-+ depends on MIPS64
-+ select ARC
-+ select ARC64
-+ select DMA_IP27
-+ select HW_HAS_PCI
-+ select PCI_DOMAINS
-+ help
-+ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
-+ workstations. To compile a Linux kernel that runs on these, say Y
-+ here.
-+
-+#config SGI_SN0_XXL
-+# bool "IP27 XXL"
-+# depends on SGI_IP27
-+# This options adds support for userspace processes upto 16TB size.
-+# Normally the limit is just .5TB.
-+
-+config SGI_SN0_N_MODE
-+ bool "IP27 N-Mode"
-+ depends on SGI_IP27
-+ help
-+ The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
-+ configured in either N-Modes which allows for more nodes or M-Mode
-+ which allows for more memory. Your system is most probably
-+ running in M-Mode, so you should say N here.
-+
-+config DISCONTIGMEM
-+ bool
-+ default y if SGI_IP27
-+ help
-+ Say Y to upport efficient handling of discontiguous physical memory,
-+ for architectures which are either NUMA (Non-Uniform Memory Access)
-+ or have huge holes in the physical address space for other reasons.
-+ See <file:Documentation/vm/numa> for more.
-+
-+config NUMA
-+ bool "NUMA Support"
-+ depends on SGI_IP27
-+ help
-+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-+ Access). This option is for configuring high-end multiprocessor
-+ server machines. If in doubt, say N.
++ }
++ i += tlen;
++ } while (tup != 0xff);
+
-+config MAPPED_KERNEL
-+ bool "Mapped kernel support"
-+ depends on SGI_IP27
-+ help
-+ Change the way a Linux kernel is loaded into memory on a MIPS64
-+ machine. This is required in order to support text replication and
-+ NUMA. If you need to understand it, read the source code.
++ /* Set the srom version */
++ vp += sprintf(vp, "sromrev=%d", sromrev);
++ vp++;
+
-+config REPLICATE_KTEXT
-+ bool "Kernel text replication support"
-+ depends on SGI_IP27
-+ help
-+ Say Y here to enable replicating the kernel text across multiple
-+ nodes in a NUMA cluster. This trades memory for speed.
++ /* For now just set boardflags2 to zero */
++ vp += sprintf(vp, "boardflags2=0");
++ vp++;
+
-+config REPLICATE_EXHANDLERS
-+ bool "Exception handler replication support"
-+ depends on SGI_IP27
-+ help
-+ Say Y here to enable replicating the kernel exception handlers
-+ across multiple nodes in a NUMA cluster. This trades memory for
-+ speed.
-+
-+config SGI_IP32
-+ bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
-+ depends on MIPS64 && EXPERIMENTAL
-+ select ARC
-+ select ARC32
-+ select BOOT_ELF32
-+ select OWN_DMA
-+ select DMA_IP32
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select R5000_CPU_SCACHE
-+ select RM7000_CPU_SCACHE
-+ help
-+ If you want this kernel to run on SGI O2 workstation, say Y here.
++ /* if there is no antenna gain field, set default */
++ if (ag_init == FALSE) {
++ vp += sprintf(vp, "ag0=%d", 0xff);
++ vp++;
++ }
+
-+config SOC_AU1X00
-+ depends on MIPS32
-+ bool "Support for AMD/Alchemy Au1X00 SOCs"
++ /* final nullbyte terminator */
++ *vp++ = '\0';
++ varsize = (uint)vp - (uint)base;
+
-+choice
-+ prompt "Au1X00 SOC Type"
-+ depends on SOC_AU1X00
-+ help
-+ Say Y here to enable support for one of three AMD/Alchemy
-+ SOCs. For additional documentation see www.amd.com.
-+
-+config SOC_AU1000
-+ bool "SOC_AU1000"
-+config SOC_AU1100
-+ bool "SOC_AU1100"
-+config SOC_AU1500
-+ bool "SOC_AU1500"
-+config SOC_AU1550
-+ bool "SOC_AU1550"
-+
-+endchoice
-+
-+choice
-+ prompt "AMD/Alchemy Au1x00 board support"
-+ depends on SOC_AU1X00
-+ help
-+ These are evaluation boards built by AMD/Alchemy to
-+ showcase their Au1X00 Internet Edge Processors. The SOC design
-+ is based on the MIPS32 architecture running at 266/400/500MHz
-+ with many integrated peripherals. Further information can be
-+ found at their website, <http://www.amd.com/>. Say Y here if you
-+ wish to build a kernel for this platform.
-+
-+config MIPS_PB1000
-+ bool "PB1000 board"
-+ depends on SOC_AU1000
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
++ ASSERT(varsize < VARS_MAX);
+
-+config MIPS_PB1100
-+ bool "PB1100 board"
-+ depends on SOC_AU1100
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
++ if (varsize == VARS_MAX) {
++ *vars = base;
++ } else {
++ vp = MALLOC(varsize);
++ ASSERT(vp);
++ bcopy(base, vp, varsize);
++ MFREE(base, VARS_MAX);
++ *vars = vp;
++ }
++ *count = varsize;
+
-+config MIPS_PB1500
-+ bool "PB1500 board"
-+ depends on SOC_AU1500
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
++ return (0);
++}
+
-+config MIPS_PB1550
-+ bool "PB1550 board"
-+ depends on SOC_AU1550
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
-+ select MIPS_DISABLE_OBSOLETE_IDE
+
-+config MIPS_DB1000
-+ bool "DB1000 board"
-+ depends on SOC_AU1000
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
++/* set PCMCIA sprom command register */
++static int
++sprom_cmd_pcmcia(void *osh, uint8 cmd)
++{
++ uint8 status;
++ uint wait_cnt = 1000;
+
-+config MIPS_DB1100
-+ bool "DB1100 board"
-+ depends on SOC_AU1100
-+ select DMA_NONCOHERENT
++ /* write sprom command register */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
+
-+config MIPS_DB1500
-+ bool "DB1500 board"
-+ depends on SOC_AU1500
-+ select DMA_COHERENT
-+ select HW_HAS_PCI
-+ select MIPS_DISABLE_OBSOLETE_IDE
++ /* wait status */
++ while (wait_cnt--) {
++ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
++ if (status & SROM_DONE)
++ return 0;
++ }
++ return 1;
++}
+
-+config MIPS_DB1550
-+ bool "DB1550 board"
-+ depends on SOC_AU1550
-+ select HW_HAS_PCI
-+ select DMA_COHERENT
-+ select MIPS_DISABLE_OBSOLETE_IDE
++/* read a word from the PCMCIA srom */
++static int
++sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data)
++{
++ uint8 addr_l, addr_h, data_l, data_h;
+
-+config MIPS_BOSPORUS
-+ bool "Bosporus board"
-+ depends on SOC_AU1500
-+ select DMA_NONCOHERENT
++ addr_l = (uint8)((addr * 2) & 0xff);
++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
+
-+config MIPS_MIRAGE
-+ bool "Mirage board"
-+ depends on SOC_AU1500
-+ select DMA_NONCOHERENT
++ /* set address */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
+
-+config MIPS_XXS1500
-+ bool "MyCable XXS1500 board"
-+ depends on SOC_AU1500
-+ select DMA_NONCOHERENT
++ /* do read */
++ if (sprom_cmd_pcmcia(osh, SROM_READ))
++ return 1;
+
-+config MIPS_MTX1
-+ bool "4G Systems MTX-1 board"
-+ depends on SOC_AU1500
-+ select HW_HAS_PCI
-+ select DMA_NONCOHERENT
++ /* read data */
++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
++ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
+
-+endchoice
++ *data = (data_h << 8) | data_l;
++ return 0;
++}
+
-+config SIBYTE_SB1xxx_SOC
-+ bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select BOOT_ELF32
-+ select DMA_COHERENT
-+ select SWAP_IO_SPACE
++/* write a word to the PCMCIA srom */
++static int
++sprom_write_pcmcia(void *osh, uint16 addr, uint16 data)
++{
++ uint8 addr_l, addr_h, data_l, data_h;
+
-+choice
-+ prompt "BCM1xxx SOC-based board"
-+ depends on SIBYTE_SB1xxx_SOC
-+ default SIBYTE_SWARM
-+ help
-+ Enable support for boards based on the SiByte line of SOCs
-+ from Broadcom. There are configurations for the known
-+ evaluation boards, or you can choose "Other" and add your
-+ own board support code.
++ addr_l = (uint8)((addr * 2) & 0xff);
++ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
++ data_l = (uint8)(data & 0xff);
++ data_h = (uint8)((data >> 8) & 0xff);
+
-+config SIBYTE_SWARM
-+ bool "BCM91250A-SWARM"
-+ select SIBYTE_SB1250
++ /* set address */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
+
-+config SIBYTE_SENTOSA
-+ bool "BCM91250E-Sentosa"
-+ select SIBYTE_SB1250
++ /* write data */
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
++ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
+
-+config SIBYTE_RHONE
-+ bool "BCM91125E-Rhone"
-+ select SIBYTE_BCM1125H
++ /* do write */
++ return sprom_cmd_pcmcia(osh, SROM_WRITE);
++}
+
-+config SIBYTE_CARMEL
-+ bool "BCM91120x-Carmel"
-+ select SIBYTE_BCM1120
++/*
++ * Read in and validate sprom.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc)
++{
++ int off, nw;
++ uint8 chk8;
++ int i;
+
-+config SIBYTE_PTSWARM
-+ bool "BCM91250PT-PTSWARM"
-+ select SIBYTE_SB1250
++ off = byteoff / 2;
++ nw = ROUNDUP(nbytes, 2) / 2;
+
-+config SIBYTE_LITTLESUR
-+ bool "BCM91250C2-LittleSur"
-+ select SIBYTE_SB1250
++ /* read the sprom */
++ for (i = 0; i < nw; i++)
++ buf[i] = R_REG(&sprom[off + i]);
+
-+config SIBYTE_CRHINE
-+ bool "BCM91120C-CRhine"
-+ select SIBYTE_BCM1120
++ if (check_crc) {
++ /* fixup the endianness so crc8 will pass */
++ htol16_buf(buf, nw * 2);
++ if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE)
++ return (1);
++ /* now correct the endianness of the byte array */
++ ltoh16_buf(buf, nw * 2);
++ }
+
-+config SIBYTE_CRHONE
-+ bool "BCM91125C-CRhone"
-+ select SIBYTE_BCM1125
++ return (0);
++}
+
-+config SIBYTE_UNKNOWN
-+ bool "Other"
++/*
++ * Initialize nonvolatile variable table from sprom.
++ * Return 0 on success, nonzero on error.
++ */
+
-+endchoice
++static int
++initvars_srom_pci(void *curmap, char **vars, int *count)
++{
++ uint16 w, b[64];
++ uint8 sromrev;
++ struct ether_addr ea;
++ char eabuf[32];
++ int c, woff, i;
++ char *vp, *base;
+
-+config SIBYTE_BOARD
-+ bool
-+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
-+ default y
++ if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE))
++ return (-1);
+
-+choice
-+ prompt "BCM1xxx SOC Type"
-+ depends on SIBYTE_UNKNOWN
-+ default SIBYTE_UNK_BCM1250
-+ help
-+ Since you haven't chosen a known evaluation board from
-+ Broadcom, you must explicitly pick the SOC this kernel is
-+ targetted for.
++ /* top word of sprom contains version and crc8 */
++ sromrev = b[63] & 0xff;
++ if ((sromrev != 1) && (sromrev != 2)) {
++ return (-2);
++ }
+
-+config SIBYTE_UNK_BCM1250
-+ bool "BCM1250"
-+ select SIBYTE_SB1250
++ ASSERT(vars);
++ ASSERT(count);
+
-+config SIBYTE_UNK_BCM1120
-+ bool "BCM1120"
-+ select SIBYTE_BCM1120
++ base = vp = MALLOC(VARS_MAX);
++ ASSERT(vp);
+
-+config SIBYTE_UNK_BCM1125
-+ bool "BCM1125"
-+ select SIBYTE_BCM1125
++ vp += sprintf(vp, "sromrev=%d", sromrev);
++ vp++;
+
-+config SIBYTE_UNK_BCM1125H
-+ bool "BCM1125H"
-+ select SIBYTE_BCM1125H
++ if (sromrev >= 2) {
++ /* New section takes over the 4th hardware function space */
+
-+endchoice
++ /* Word 28 is boardflags2 */
++ vp += sprintf(vp, "boardflags2=%d", b[28]);
++ vp++;
+
-+config SIBYTE_SB1250
-+ bool
-+ select HW_HAS_PCI
++ /* Word 29 is max power 11a high/low */
++ w = b[29];
++ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
++ vp++;
+
-+config SIBYTE_BCM1120
-+ bool
-+ select SIBYTE_BCM112X
++ /* Words 30-32 set the 11alow pa settings,
++ * 33-35 are the 11ahigh ones.
++ */
++ for (i = 0; i < 3; i++) {
++ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
++ vp++;
++ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
++ vp++;
++ }
++ w = b[59];
++ if (w == 0)
++ vp += sprintf(vp, "ccode=");
++ else
++ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
++ vp++;
+
-+config SIBYTE_BCM1125
-+ bool
-+ select HW_HAS_PCI
-+ select SIBYTE_BCM112X
++ }
+
-+config SIBYTE_BCM1125H
-+ bool
-+ select HW_HAS_PCI
-+ select SIBYTE_BCM112X
++ /* parameter section of sprom starts at byte offset 72 */
++ woff = 72/2;
+
-+config SIBYTE_BCM112X
-+ bool
++ /* first 6 bytes are il0macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += ETHER_ADDR_LEN/2 ;
++ bcm_ether_ntoa((uchar*)&ea, eabuf);
++ vp += sprintf(vp, "il0macaddr=%s", eabuf);
++ vp++;
+
-+choice
-+ prompt "SiByte SOC Stepping"
-+ depends on SIBYTE_SB1xxx_SOC
++ /* next 6 bytes are et0macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += ETHER_ADDR_LEN/2 ;
++ bcm_ether_ntoa((uchar*)&ea, eabuf);
++ vp += sprintf(vp, "et0macaddr=%s", eabuf);
++ vp++;
+
-+config CPU_SB1_PASS_1
-+ bool "1250 Pass1"
-+ depends on SIBYTE_SB1250
-+ select CPU_HAS_PREFETCH
++ /* next 6 bytes are et1macaddr */
++ ea.octet[0] = (b[woff] >> 8) & 0xff;
++ ea.octet[1] = b[woff] & 0xff;
++ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++ ea.octet[3] = b[woff+1] & 0xff;
++ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++ ea.octet[5] = b[woff+2] & 0xff;
++ woff += ETHER_ADDR_LEN/2 ;
++ bcm_ether_ntoa((uchar*)&ea, eabuf);
++ vp += sprintf(vp, "et1macaddr=%s", eabuf);
++ vp++;
+
-+config CPU_SB1_PASS_2_1250
-+ bool "1250 An"
-+ depends on SIBYTE_SB1250
-+ select CPU_SB1_PASS_2
-+ help
-+ Also called BCM1250 Pass 2
++ /*
++ * Enet phy settings one or two singles or a dual
++ * Bits 4-0 : MII address for enet0 (0x1f for not there)
++ * Bits 9-5 : MII address for enet1 (0x1f for not there)
++ * Bit 14 : Mdio for enet0
++ * Bit 15 : Mdio for enet1
++ */
++ w = b[woff];
++ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
++ vp++;
++ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
++ vp++;
++ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
++ vp++;
++ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
++ vp++;
+
-+config CPU_SB1_PASS_2_2
-+ bool "1250 Bn"
-+ depends on SIBYTE_SB1250
-+ select CPU_HAS_PREFETCH
-+ help
-+ Also called BCM1250 Pass 2.2
++ /* Word 46 has board rev, antennas 0/1 & Country code/control */
++ w = b[46];
++ vp += sprintf(vp, "boardrev=%d", w & 0xff);
++ vp++;
+
-+config CPU_SB1_PASS_4
-+ bool "1250 Cn"
-+ depends on SIBYTE_SB1250
-+ select CPU_HAS_PREFETCH
-+ help
-+ Also called BCM1250 Pass 3
++ if (sromrev > 1)
++ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
++ else
++ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
++ vp++;
+
-+config CPU_SB1_PASS_2_112x
-+ bool "112x Hybrid"
-+ depends on SIBYTE_BCM112X
-+ select CPU_SB1_PASS_2
++ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
++ vp++;
+
-+config CPU_SB1_PASS_3
-+ bool "112x An"
-+ depends on SIBYTE_BCM112X
-+ select CPU_HAS_PREFETCH
++ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
++ vp++;
+
-+endchoice
++ /* Words 47-49 set the (wl) pa settings */
++ woff = 47;
+
-+config CPU_SB1_PASS_2
-+ bool
++ for (i = 0; i < 3; i++) {
++ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
++ vp++;
++ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
++ vp++;
++ }
+
-+config SIBYTE_HAS_LDT
-+ bool
-+ depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
-+ default y
++ /*
++ * Words 50-51 set the customer-configured wl led behavior.
++ * 8 bits/gpio pin. High bit: activehi=0, activelo=1;
++ * LED behavior values defined in wlioctl.h .
++ */
++ w = b[50];
++ if ((w != 0) && (w != 0xffff)) {
++ /* gpio0 */
++ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
++ vp++;
+
-+config SIMULATION
-+ bool "Running under simulation"
-+ depends on SIBYTE_SB1xxx_SOC
-+ help
-+ Build a kernel suitable for running under the GDB simulator.
-+ Primarily adjusts the kernel's notion of time.
++ /* gpio1 */
++ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++ w = b[51];
++ if ((w != 0) && (w != 0xffff)) {
++ /* gpio2 */
++ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
++ vp++;
+
-+config SIBYTE_CFE
-+ bool "Booting from CFE"
-+ depends on SIBYTE_SB1xxx_SOC
-+ help
-+ Make use of the CFE API for enumerating available memory,
-+ controlling secondary CPUs, and possibly console output.
++ /* gpio3 */
++ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
++ vp++;
++ }
++
++ /* Word 52 is max power 0/1 */
++ w = b[52];
++ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
++ vp++;
+
-+config SIBYTE_CFE_CONSOLE
-+ bool "Use firmware console"
-+ depends on SIBYTE_CFE
-+ help
-+ Use the CFE API's console write routines during boot. Other console
-+ options (VT console, sb1250 duart console, etc.) should not be
-+ configured.
-+
-+config SIBYTE_STANDALONE
-+ bool
-+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
-+ default y
-+
-+config SIBYTE_STANDALONE_RAM_SIZE
-+ int "Memory size (in megabytes)"
-+ depends on SIBYTE_STANDALONE
-+ default "32"
-+
-+config SIBYTE_BUS_WATCHER
-+ bool "Support for Bus Watcher statistics"
-+ depends on SIBYTE_SB1xxx_SOC
-+ help
-+ Handle and keep statistics on the bus error interrupts (COR_ECC,
-+ BAD_ECC, IO_BUS).
++ /* Word 56 is idle tssi target 0/1 */
++ w = b[56];
++ vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
++ vp++;
++ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
++ vp++;
+
-+config SIBYTE_BW_TRACE
-+ bool "Capture bus trace before bus error"
-+ depends on SIBYTE_BUS_WATCHER
-+ help
-+ Run a continuous bus trace, dumping the raw data as soon as
-+ a ZBbus error is detected. Cannot work if ZBbus profiling
-+ is turned on, and also will interfere with JTAG-based trace
-+ buffer activity. Raw buffer data is dumped to console, and
-+ must be processed off-line.
-+
-+config SIBYTE_SB1250_PROF
-+ bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
-+ depends on SIBYTE_SB1xxx_SOC
-+
-+config SIBYTE_TBPROF
-+ bool "Support for ZBbus profiling"
-+ depends on SIBYTE_SB1xxx_SOC
-+
-+config SNI_RM200_PCI
-+ bool "Support for SNI RM200 PCI"
-+ select ARC
-+ select ARC32
-+ select BOOT_ELF32
-+ select DMA_NONCOHERENT
-+ select GENERIC_ISA_DMA
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select HW_HAS_PCI
-+ select I8259
-+ select ISA
-+ help
-+ The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
-+ Nixdorf Informationssysteme (SNI), parent company of Pyramid
-+ Technology and now in turn merged with Fujitsu. Say Y here to
-+ support this machine type.
-+
-+config TOSHIBA_RBTX4927
-+ bool "Support for Toshiba TBTX49[23]7 board"
-+ depends on MIPS32
-+ select DMA_NONCOHERENT
-+ select HAS_TXX9_SERIAL
-+ select HW_HAS_PCI
-+ select I8259
-+ select ISA
-+ select SWAP_IO_SPACE
-+ help
-+ This Toshiba board is based on the TX4927 processor. Say Y here to
-+ support this machine type
++ /* Word 57 is boardflags, if not programmed make it zero */
++ w = b[57];
++ if (w == 0xffff) w = 0;
++ vp += sprintf(vp, "boardflags=%d", w);
++ vp++;
+
-+config TOSHIBA_FPCIB0
-+ bool "FPCIB0 Backplane Support"
-+ depends on TOSHIBA_RBTX4927
++ /* Word 58 is antenna gain 0/1 */
++ w = b[58];
++ vp += sprintf(vp, "ag0=%d", w & 0xff);
++ vp++;
+
-+config RWSEM_GENERIC_SPINLOCK
-+ bool
-+ default y
++ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
++ vp++;
+
-+config RWSEM_XCHGADD_ALGORITHM
-+ bool
++ if (sromrev == 1) {
++ /* set the oem string */
++ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++ ((b[59] >> 8) & 0xff), (b[59] & 0xff),
++ ((b[60] >> 8) & 0xff), (b[60] & 0xff),
++ ((b[61] >> 8) & 0xff), (b[61] & 0xff),
++ ((b[62] >> 8) & 0xff), (b[62] & 0xff));
++ vp++;
++ }
+
-+config GENERIC_CALIBRATE_DELAY
-+ bool
-+ default y
++ /* final nullbyte terminator */
++ *vp++ = '\0';
+
-+config HAVE_DEC_LOCK
-+ bool
-+ default y
++ c = vp - base;
++ ASSERT(c <= VARS_MAX);
+
-+#
-+# Select some configuration options automatically based on user selections.
-+#
-+config ARC
-+ bool
-+ depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
-+ default y
-+
-+config DMA_COHERENT
-+ bool
-+
-+config DMA_IP27
-+ bool
-+
-+config DMA_NONCOHERENT
-+ bool
-+
-+config EARLY_PRINTK
-+ bool
-+ depends on MACH_DECSTATION
-+ default y
-+
-+config GENERIC_ISA_DMA
-+ bool
-+ depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
-+ default y
-+
-+config I8259
-+ bool
-+ depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
-+ default y
-+
-+config LIMITED_DMA
-+ bool
-+ select HIGHMEM
-+
-+config MIPS_BONITO64
-+ bool
-+ depends on MIPS_ATLAS || MIPS_MALTA
-+ default y
-+
-+config MIPS_MSC
-+ bool
-+ depends on MIPS_ATLAS || MIPS_MALTA
-+ default y
-+
-+config MIPS_NILE4
-+ bool
-+ depends on LASAT
-+ default y
-+
-+config MIPS_DISABLE_OBSOLETE_IDE
-+ bool
-+
-+config CPU_LITTLE_ENDIAN
-+ bool "Generate little endian code"
-+ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-+ default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
-+ help
-+ Some MIPS machines can be configured for either little or big endian
-+ byte order. These modes require different kernels. Say Y if your
-+ machine is little endian, N if it's a big endian machine.
++ if (c == VARS_MAX) {
++ *vars = base;
++ } else {
++ vp = MALLOC(c);
++ ASSERT(vp);
++ bcopy(base, vp, c);
++ MFREE(base, VARS_MAX);
++ *vars = vp;
++ }
++ *count = c;
+
-+config IRQ_CPU
-+ bool
++ return (0);
++}
+
-+config IRQ_CPU_RM7K
-+ bool
++/*
++ * Read the cis and call parsecis to initialize the vars.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++initvars_cis_pcmcia(void *osh, char **vars, int *count)
++{
++ uint8 *cis = NULL;
++ int rc;
+
-+config IRQ_MV64340
-+ bool
++ if ((cis = MALLOC(CIS_SIZE)) == NULL)
++ return (-1);
+
-+config DDB5XXX_COMMON
-+ bool
-+ depends on DDB5074 || DDB5476 || DDB5477
-+ default y
++ OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE);
+
-+config MIPS_BOARDS_GEN
-+ bool
-+ depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
-+ default y
++ rc = srom_parsecis(cis, vars, count);
+
-+config MIPS_GT64111
-+ bool
-+ depends on MIPS_COBALT
-+ default y
++ MFREE(cis, CIS_SIZE);
+
-+config MIPS_GT64120
-+ bool
-+ depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
-+ default y
++ return (rc);
++}
+
-+config MIPS_TX3927
-+ bool
-+ depends on TOSHIBA_JMR3927
-+ select HAS_TXX9_SERIAL
-+ default y
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-08-28 11:12:20.428859456 +0200
+@@ -0,0 +1,691 @@
++/*
++ * Misc useful OS-independent routines.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
+
-+config PCI_MARVELL
-+ bool
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmendian.h>
++#include <bcmnvram.h>
+
-+config ITE_BOARD_GEN
-+ bool
-+ depends on MIPS_IVR || MIPS_ITE8172
-+ default y
++unsigned char bcm_ctype[] = {
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */
++ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */
++ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */
++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */
++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */
++ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */
++ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */
++ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */
++ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */
++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */
++ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */
++ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */
++ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */
++ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */
++ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */
++};
+
-+config SWAP_IO_SPACE
-+ bool
++uchar
++bcm_toupper(uchar c)
++{
++ if (bcm_islower(c))
++ c -= 'a'-'A';
++ return (c);
++}
+
-+#
-+# Unfortunately not all GT64120 systems run the chip at the same clock.
-+# As the user for the clock rate and try to minimize the available options.
-+#
-+choice
-+ prompt "Galileo Chip Clock"
-+ #default SYSCLK_83 if MIPS_EV64120
-+ depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
-+ default SYSCLK_83 if MIPS_EV64120
-+ default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
++ulong
++bcm_strtoul(char *cp, char **endp, uint base)
++{
++ ulong result, value;
++ bool minus;
++
++ minus = FALSE;
+
-+config SYSCLK_75
-+ bool "75" if MIPS_EV64120
++ while (bcm_isspace(*cp))
++ cp++;
++
++ if (cp[0] == '+')
++ cp++;
++ else if (cp[0] == '-') {
++ minus = TRUE;
++ cp++;
++ }
++
++ if (base == 0) {
++ if (cp[0] == '0') {
++ if ((cp[1] == 'x') || (cp[1] == 'X')) {
++ base = 16;
++ cp = &cp[2];
++ } else {
++ base = 8;
++ cp = &cp[1];
++ }
++ } else
++ base = 10;
++ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
++ cp = &cp[2];
++ }
++
++ result = 0;
+
-+config SYSCLK_83
-+ bool "83.3" if MIPS_EV64120
++ while (bcm_isxdigit(*cp) &&
++ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
++ result = result*base + value;
++ cp++;
++ }
+
-+config SYSCLK_100
-+ bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
++ if (minus)
++ result = (ulong)(result * -1);
+
-+endchoice
++ if (endp)
++ *endp = (char *)cp;
+
-+config AU1X00_USB_DEVICE
-+ bool
-+ depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
-+ default n
++ return (result);
++}
+
-+config MIPS_GT96100
-+ bool
-+ depends on MIPS_EV96100
-+ default y
-+ help
-+ Say Y here to support the Galileo Technology GT96100 communications
-+ controller card. There is a web page at <http://www.galileot.com/>.
-+
-+config IT8172_CIR
-+ bool
-+ depends on MIPS_ITE8172 || MIPS_IVR
-+ default y
-+
-+config IT8712
-+ bool
-+ depends on MIPS_ITE8172
-+ default y
-+
-+config BOOT_ELF32
-+ bool
-+ depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
-+ default y
-+
-+config MIPS_L1_CACHE_SHIFT
-+ int
-+ default "4" if MACH_DECSTATION
-+ default "7" if SGI_IP27
-+ default "5"
-+
-+config ARC32
-+ bool
-+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-+ default y
-+
-+config FB
-+ bool
-+ depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
-+ default y
-+ ---help---
-+ The frame buffer device provides an abstraction for the graphics
-+ hardware. It represents the frame buffer of some video hardware and
-+ allows application software to access the graphics hardware through
-+ a well-defined interface, so the software doesn't need to know
-+ anything about the low-level (hardware register) stuff.
-+
-+ Frame buffer devices work identically across the different
-+ architectures supported by Linux and make the implementation of
-+ application programs easier and more portable; at this point, an X
-+ server exists which uses the frame buffer device exclusively.
-+ On several non-X86 architectures, the frame buffer device is the
-+ only way to use the graphics hardware.
-+
-+ The device is accessed through special device nodes, usually located
-+ in the /dev directory, i.e. /dev/fb*.
-+
-+ You need an utility program called fbset to make full use of frame
-+ buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+ and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto>
-+ for more information.
-+
-+ Say Y here and to the driver for your graphics board below if you
-+ are compiling a kernel for a non-x86 architecture.
-+
-+ If you are compiling for the x86 architecture, you can say Y if you
-+ want to play with it, but it is not essential. Please note that
-+ running graphical applications that directly touch the hardware
-+ (e.g. an accelerated X server) and that are not frame buffer
-+ device-aware may cause unexpected results. If unsure, say N.
-+
-+config HAVE_STD_PC_SERIAL_PORT
-+ bool
-+
-+config VR4181
-+ bool
-+ depends on NEC_OSPREY
-+ default y
-+
-+config ARC_CONSOLE
-+ bool "ARC console support"
-+ depends on SGI_IP22 || SNI_RM200_PCI
-+
-+config ARC_MEMORY
-+ bool
-+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
-+ default y
-+
-+config ARC_PROMLIB
-+ bool
-+ depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-+ default y
-+
-+config ARC64
-+ bool
-+ depends on SGI_IP27
-+ default y
-+
-+config BOOT_ELF64
-+ bool
-+ depends on SGI_IP27
-+ default y
-+
-+#config MAPPED_PCI_IO y
-+# bool
-+# depends on SGI_IP27
-+# default y
-+
-+config QL_ISP_A64
-+ bool
-+ depends on SGI_IP27
-+ default y
-+
-+config TOSHIBA_BOARDS
-+ bool
-+ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-+ default y
-+
-+endmenu
-+
-+menu "CPU selection"
-+
-+choice
-+ prompt "CPU type"
-+ default CPU_R4X00
-+
-+config CPU_MIPS32
-+ bool "MIPS32"
-+
-+config CPU_MIPS64
-+ bool "MIPS64"
-+
-+config CPU_R3000
-+ bool "R3000"
-+ depends on MIPS32
-+ help
-+ Please make sure to pick the right CPU type. Linux/MIPS is not
-+ designed to be generic, i.e. Kernels compiled for R3000 CPUs will
-+ *not* work on R4000 machines and vice versa. However, since most
-+ of the supported machines have an R4000 (or similar) CPU, R4x00
-+ might be a safe bet. If the resulting kernel does not work,
-+ try to recompile with R3000.
-+
-+config CPU_TX39XX
-+ bool "R39XX"
-+ depends on MIPS32
-+
-+config CPU_VR41XX
-+ bool "R41xx"
-+ help
-+ The options selects support for the NEC VR41xx series of processors.
-+ Only choose this option if you have one of these processors as a
-+ kernel built with this option will not run on any other type of
-+ processor or vice versa.
++uint
++bcm_atoi(char *s)
++{
++ uint n;
+
-+config CPU_R4300
-+ bool "R4300"
-+ help
-+ MIPS Technologies R4300-series processors.
++ n = 0;
+
-+config CPU_R4X00
-+ bool "R4x00"
-+ help
-+ MIPS Technologies R4000-series processors other than 4300, including
-+ the R4000, R4400, R4600, and 4700.
++ while (bcm_isdigit(*s))
++ n = (n * 10) + *s++ - '0';
++ return (n);
++}
+
-+config CPU_TX49XX
-+ bool "R49XX"
++void
++deadbeef(char *p, uint len)
++{
++ static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef };
+
-+config CPU_R5000
-+ bool "R5000"
-+ help
-+ MIPS Technologies R5000-series processors other than the Nevada.
++ while (len-- > 0) {
++ *p = meat[((uint)p) & 3];
++ p++;
++ }
++}
+
-+config CPU_R5432
-+ bool "R5432"
++/* pretty hex print a contiguous buffer */
++void
++prhex(char *msg, uchar *buf, uint nbytes)
++{
++ char line[256];
++ char* p;
++ uint i;
+
-+config CPU_R6000
-+ bool "R6000"
-+ depends on MIPS32 && EXPERIMENTAL
-+ help
-+ MIPS Technologies R6000 and R6000A series processors. Note these
-+ processors are extremly rare and the support for them is incomplete.
++ if (msg && (msg[0] != '\0'))
++ printf("%s: ", msg);
+
-+config CPU_NEVADA
-+ bool "RM52xx"
-+ help
-+ QED / PMC-Sierra RM52xx-series ("Nevada") processors.
++ p = line;
++ for (i = 0; i < nbytes; i++) {
++ if (i % 16 == 0) {
++ p += sprintf(p, "%04d: ", i); /* line prefix */
++ }
++ p += sprintf(p, "%02x ", buf[i]);
++ if (i % 16 == 15) {
++ printf("%s\n", line); /* flush line */
++ p = line;
++ }
++ }
+
-+config CPU_R8000
-+ bool "R8000"
-+ depends on MIPS64 && EXPERIMENTAL
-+ help
-+ MIPS Technologies R8000 processors. Note these processors are
-+ uncommon and the support for them is incomplete.
++ /* flush last partial line */
++ if (p != line)
++ printf("%s\n", line);
++}
+
-+config CPU_R10000
-+ bool "R10000"
-+ help
-+ MIPS Technologies R10000-series processors.
++/* pretty hex print a pkt buffer chain */
++void
++prpkt(char *msg, void *drv, void *p0)
++{
++ void *p;
+
-+config CPU_RM7000
-+ bool "RM7000"
++ if (msg && (msg[0] != '\0'))
++ printf("%s: ", msg);
+
-+config CPU_RM9000
-+ bool "RM9000"
++ for (p = p0; p; p = PKTNEXT(drv, p))
++ prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p));
++}
+
-+config CPU_SB1
-+ bool "SB1"
++/* copy a pkt buffer chain into a buffer */
++uint
++pktcopy(void *drv, void *p, uint offset, int len, uchar *buf)
++{
++ uint n, ret = 0;
+
-+endchoice
++ if (len < 0)
++ len = 4096; /* "infinite" */
+
-+choice
-+ prompt "Kernel page size"
-+ default PAGE_SIZE_4KB
++ /* skip 'offset' bytes */
++ for (; p && offset; p = PKTNEXT(drv, p)) {
++ if (offset < (uint)PKTLEN(drv, p))
++ break;
++ offset -= PKTLEN(drv, p);
++ }
+
-+config PAGE_SIZE_4KB
-+ bool "4kB"
-+ help
-+ This option select the standard 4kB Linux page size. On some
-+ R3000-family processors this is the only available page size. Using
-+ 4kB page size will minimize memory consumption and is therefore
-+ recommended for low memory systems.
-+
-+config PAGE_SIZE_8KB
-+ bool "8kB"
-+ depends on EXPERIMENTAL && CPU_R8000
-+ help
-+ Using 8kB page size will result in higher performance kernel at
-+ the price of higher memory consumption. This option is available
-+ only on the R8000 processor. Not that at the time of this writing
-+ this option is still high experimental; there are also issues with
-+ compatibility of user applications.
-+
-+config PAGE_SIZE_16KB
-+ bool "16kB"
-+ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
-+ help
-+ Using 16kB page size will result in higher performance kernel at
-+ the price of higher memory consumption. This option is available on
-+ all non-R3000 family processor. Not that at the time of this
-+ writing this option is still high experimental; there are also
-+ issues with compatibility of user applications.
-+
-+config PAGE_SIZE_64KB
-+ bool "64kB"
-+ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
-+ help
-+ Using 64kB page size will result in higher performance kernel at
-+ the price of higher memory consumption. This option is available on
-+ all non-R3000 family processor. Not that at the time of this
-+ writing this option is still high experimental; there are also
-+ issues with compatibility of user applications.
++ if (!p)
++ return 0;
+
-+endchoice
++ /* copy the data */
++ for (; p && len; p = PKTNEXT(drv, p)) {
++ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len);
++ bcopy(PKTDATA(drv, p) + offset, buf, n);
++ buf += n;
++ len -= n;
++ ret += n;
++ offset = 0;
++ }
+
-+config BOARD_SCACHE
-+ bool
++ return ret;
++}
+
-+config IP22_CPU_SCACHE
-+ bool
-+ select BOARD_SCACHE
++/* return total length of buffer chain */
++uint
++pkttotlen(void *drv, void *p)
++{
++ uint total;
+
-+config R5000_CPU_SCACHE
-+ bool
-+ select BOARD_SCACHE
++ total = 0;
++ for (; p; p = PKTNEXT(drv, p))
++ total += PKTLEN(drv, p);
++ return (total);
++}
+
-+config RM7000_CPU_SCACHE
-+ bool
-+ select BOARD_SCACHE
+
-+config SIBYTE_DMA_PAGEOPS
-+ bool "Use DMA to clear/copy pages"
-+ depends on CPU_SB1
-+ help
-+ Instead of using the CPU to zero and copy pages, use a Data Mover
-+ channel. These DMA channels are otherwise unused by the standard
-+ SiByte Linux port. Seems to give a small performance benefit.
-+
-+config CPU_HAS_PREFETCH
-+ bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
-+ default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
-+
-+config VTAG_ICACHE
-+ bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
-+ default y if CPU_SB1
-+
-+config SB1_PASS_1_WORKAROUNDS
-+ bool
-+ depends on CPU_SB1_PASS_1
-+ default y
-+
-+config SB1_PASS_2_WORKAROUNDS
-+ bool
-+ depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
-+ default y
-+
-+config SB1_PASS_2_1_WORKAROUNDS
-+ bool
-+ depends on CPU_SB1 && CPU_SB1_PASS_2
-+ default y
-+
-+config 64BIT_PHYS_ADDR
-+ bool "Support for 64-bit physical address space"
-+ depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
-+
-+config CPU_ADVANCED
-+ bool "Override CPU Options"
-+ depends on MIPS32
-+ help
-+ Saying yes here allows you to select support for various features
-+ your CPU may or may not have. Most people should say N here.
++uchar*
++bcm_ether_ntoa(char *ea, char *buf)
++{
++ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
++ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
++ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
++ return (buf);
++}
+
-+config CPU_HAS_LLSC
-+ bool "ll/sc Instructions available" if CPU_ADVANCED
-+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
-+ help
-+ MIPS R4000 series and later provide the Load Linked (ll)
-+ and Store Conditional (sc) instructions. More information is
-+ available at <http://www.go-ecs.com/mips/miptek1.htm>.
++/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
++int
++bcm_ether_atoe(char *p, char *ea)
++{
++ int i = 0;
+
-+ Say Y here if your CPU has the ll and sc instructions. Say Y here
-+ for better performance, N if you don't know. You must say Y here
-+ for multiprocessor machines.
++ for (;;) {
++ ea[i++] = (char) bcm_strtoul(p, &p, 16);
++ if (!*p++ || i == 6)
++ break;
++ }
+
-+config CPU_HAS_LLDSCD
-+ bool "lld/scd Instructions available" if CPU_ADVANCED
-+ default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
-+ help
-+ Say Y here if your CPU has the lld and scd instructions, the 64-bit
-+ equivalents of ll and sc. Say Y here for better performance, N if
-+ you don't know. You must say Y here for multiprocessor machines.
++ return (i == 6);
++}
+
-+config CPU_HAS_WB
-+ bool "Writeback Buffer available" if CPU_ADVANCED
-+ default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
-+ help
-+ Say N here for slightly better performance. You must say Y here for
-+ machines which require flushing of write buffers in software. Saying
-+ Y is the safe option; N may result in kernel malfunction and crashes.
++/*
++ * Traverse a string of 1-byte tag/1-byte length/variable-length value
++ * triples, returning a pointer to the substring whose first element
++ * matches tag. Stop parsing when we see an element whose ID is greater
++ * than the target key.
++ */
++bcm_tlv_t *
++bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
++{
++ bcm_tlv_t *elt;
++ int totlen;
+
-+config CPU_HAS_SYNC
-+ bool
-+ depends on !CPU_R3000
-+ default y
++ elt = (bcm_tlv_t*)buf;
++ totlen = buflen;
+
-+#
-+# - Highmem only makes sense for the 32-bit kernel.
-+# - The current highmem code will only work properly on physically indexed
-+# caches such as R3000, SB1, R7000 or those that look like they're virtually
-+# indexed such as R4000/R4400 SC and MC versions or R10000. So for the
-+# moment we protect the user and offer the highmem option only on machines
-+# where it's known to be safe. This will not offer highmem on a few systems
-+# such as MIPS32 and MIPS64 CPUs which may have virtual and physically
-+# indexed CPUs but we're playing safe.
-+# - We should not offer highmem for system of which we already know that they
-+# don't have memory configurations that could gain from highmem support in
-+# the kernel because they don't support configurations with RAM at physical
-+# addresses > 0x20000000.
-+#
-+config HIGHMEM
-+ bool "High Memory Support"
-+ depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
-+
-+config SMP
-+ bool "Multi-Processing support"
-+ depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
-+ ---help---
-+ This enables support for systems with more than one CPU. If you have
-+ a system with only one CPU, like most personal computers, say N. If
-+ you have a system with more than one CPU, say Y.
-+
-+ If you say N here, the kernel will run on single and multiprocessor
-+ machines, but will use only one CPU of a multiprocessor machine. If
-+ you say Y here, the kernel will run on many, but not all,
-+ singleprocessor machines. On a singleprocessor machine, the kernel
-+ will run faster if you say N here.
-+
-+ People using multiprocessor machines who say Y here should also say
-+ Y to "Enhanced Real Time Clock Support", below.
-+
-+ See also the <file:Documentation/smp.txt> and the SMP-HOWTO
-+ available at <http://www.tldp.org/docs.html#howto>.
-+
-+ If you don't know what to do here, say N.
-+
-+config NR_CPUS
-+ int "Maximum number of CPUs (2-64)"
-+ range 2 64
-+ depends on SMP
-+ default "64" if SGI_IP27
-+ default "2"
-+ help
-+ This allows you to specify the maximum number of CPUs which this
-+ kernel will support. The maximum supported value is 32 for 32-bit
-+ kernel and 64 for 64-bit kernels; the minimum value which makes
-+ sense is 2.
-+
-+ This is purely to save memory - each supported CPU adds
-+ approximately eight kilobytes to the kernel image.
-+
-+config PREEMPT
-+ bool "Preemptible Kernel"
-+ help
-+ This option reduces the latency of the kernel when reacting to
-+ real-time or interactive events by allowing a low priority process to
-+ be preempted even if it is in kernel mode executing a system call.
-+ This allows applications to run more reliably even when the system is
-+ under load.
-+
-+config RTC_DS1742
-+ bool "DS1742 BRAM/RTC support"
-+ depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-+
-+config MIPS_INSANE_LARGE
-+ bool "Support for large 64-bit configurations"
-+ depends on CPU_R10000 && MIPS64
-+ help
-+ MIPS R10000 does support a 44 bit / 16TB address space as opposed to
-+ previous 64-bit processors which only supported 40 bit / 1TB. If you
-+ need processes of more than 1TB virtual address space, say Y here.
-+ This will result in additional memory usage, so it is not
-+ recommended for normal users.
-+
-+config RWSEM_GENERIC_SPINLOCK
-+ bool
-+ default y
-+
-+endmenu
-+
-+menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
-+
-+config HW_HAS_PCI
-+ bool
-+
-+config PCI
-+ bool "Support for PCI controller"
-+ depends on HW_HAS_PCI
-+ help
-+ Find out whether you have a PCI motherboard. PCI is the name of a
-+ bus system, i.e. the way the CPU talks to the other stuff inside
-+ your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
-+ say Y, otherwise N.
-+
-+ The PCI-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>, contains valuable
-+ information about which PCI hardware does work under Linux and which
-+ doesn't.
-+
-+config PCI_DOMAINS
-+ bool
-+ depends on PCI
-+
-+source "drivers/pci/Kconfig"
-+
-+#
-+# ISA support is now enabled via select. Too many systems still have the one
-+# or other ISA chip on the board that users don't know about so don't expect
-+# users to choose the right thing ...
-+#
-+config ISA
-+ bool
-+
-+config EISA
-+ bool "EISA support"
-+ depends on SGI_IP22 || SNI_RM200_PCI
-+ select ISA
-+ ---help---
-+ The Extended Industry Standard Architecture (EISA) bus was
-+ developed as an open alternative to the IBM MicroChannel bus.
-+
-+ The EISA bus provided some of the features of the IBM MicroChannel
-+ bus while maintaining backward compatibility with cards made for
-+ the older ISA bus. The EISA bus saw limited use between 1988 and
-+ 1995 when it was made obsolete by the PCI bus.
-+
-+ Say Y here if you are building a kernel for an EISA-based machine.
-+
-+ Otherwise, say N.
++ /* find tagged parameter */
++ while (totlen >= 2) {
++ uint id = elt->id;
++ int len = elt->len;
++
++ /* Punt if we start seeing IDs > than target key */
++ if (id > key)
++ return(NULL);
+
-+source "drivers/eisa/Kconfig"
++ /* validate remaining totlen */
++ if ((id == key) && (totlen >= (len + 2)))
++ return (elt);
+
-+config TC
-+ bool "TURBOchannel support"
-+ depends on MACH_DECSTATION
-+ help
-+ TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
-+ processors. Documentation on writing device drivers for TurboChannel
-+ is available at:
-+ <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
++ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
++ totlen -= (len + 2);
++ }
++ return NULL;
++}
+
-+#config ACCESSBUS
-+# bool "Access.Bus support"
-+# depends on TC
+
-+config MMU
-+ bool
-+ default y
++/*
++ * Traverse a string of 1-byte tag/1-byte length/variable-length value
++ * triples, returning a pointer to the substring whose first element
++ * matches tag
++ */
++bcm_tlv_t *
++bcm_parse_tlvs(void *buf, int buflen, uint key)
++{
++ bcm_tlv_t *elt;
++ int totlen;
+
-+config MCA
-+ bool
++ elt = (bcm_tlv_t*)buf;
++ totlen = buflen;
+
-+config SBUS
-+ bool
++ /* find tagged parameter */
++ while (totlen >= 2) {
++ int len = elt->len;
+
-+source "drivers/pcmcia/Kconfig"
++ /* validate remaining totlen */
++ if ((elt->id == key) && (totlen >= (len + 2)))
++ return (elt);
+
-+source "drivers/pci/hotplug/Kconfig"
++ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
++ totlen -= (len + 2);
++ }
++
++ return NULL;
++}
+
-+endmenu
++void
++pktqinit(struct pktq *q, int maxlen)
++{
++ q->head = q->tail = NULL;
++ q->maxlen = maxlen;
++ q->len = 0;
++}
+
-+menu "Executable file formats"
++void
++pktenq(struct pktq *q, void *p, bool lifo)
++{
++ ASSERT(PKTLINK(p) == NULL);
+
-+source "fs/Kconfig.binfmt"
++ PKTSETLINK(p, NULL);
+
-+config TRAD_SIGNALS
-+ bool
-+ default y if MIPS32
++ if (q->tail == NULL) {
++ ASSERT(q->head == NULL);
++ q->head = q->tail = p;
++ }
++ else {
++ ASSERT(q->head);
++ ASSERT(PKTLINK(q->tail) == NULL);
++ if (lifo) {
++ PKTSETLINK(p, q->head);
++ q->head = p;
++ } else {
++ PKTSETLINK(q->tail, p);
++ q->tail = p;
++ }
++ }
++ q->len++;
++}
+
-+config BUILD_ELF64
-+ bool "Use 64-bit ELF format for building"
-+ depends on MIPS64
-+ help
-+ A 64-bit kernel is usually built using the 64-bit ELF binary object
-+ format as it's one that allows arbitrary 64-bit constructs. For
-+ kernels that are loaded within the KSEG compatibility segments the
-+ 32-bit ELF format can optionally be used resulting in a somewhat
-+ smaller binary, but this option is not explicitly supported by the
-+ toolchain and since binutils 2.14 it does not even work at all.
++void*
++pktdeq(struct pktq *q)
++{
++ void *p;
+
-+ Say Y to use the 64-bit format or N to use the 32-bit one.
++ if ((p = q->head)) {
++ ASSERT(q->tail);
++ q->head = PKTLINK(p);
++ PKTSETLINK(p, NULL);
++ q->len--;
++ if (q->head == NULL)
++ q->tail = NULL;
++ }
++ else {
++ ASSERT(q->tail == NULL);
++ }
+
-+ If unsure say Y.
++ return (p);
++}
+
-+config BINFMT_IRIX
-+ bool "Include IRIX binary compatibility"
-+ depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
++/*******************************************************************************
++ * crc8
++ *
++ * Computes a crc8 over the input data using the polynomial:
++ *
++ * x^8 + x^7 +x^6 + x^4 + x^2 + 1
++ *
++ * The caller provides the initial value (either CRC8_INIT_VALUE
++ * or the previous returned value) to allow for processing of
++ * discontiguous blocks of data. When generating the CRC the
++ * caller is responsible for complementing the final return value
++ * and inserting it into the byte stream. When checking, a final
++ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
++ *
++ * Reference: Dallas Semiconductor Application Note 27
++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ *
++ ******************************************************************************/
+
-+config MIPS32_COMPAT
-+ bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
-+ depends on MIPS64
-+ help
-+ Select this option if you want Linux/MIPS 32-bit binary
-+ compatibility. Since all software available for Linux/MIPS is
-+ currently 32-bit you should say Y here.
-+
-+config COMPAT
-+ bool
-+ depends on MIPS32_COMPAT
-+ default y
-+
-+config MIPS32_O32
-+ bool "Kernel support for o32 binaries"
-+ depends on MIPS32_COMPAT
-+ help
-+ Select this option if you want to run o32 binaries. These are pure
-+ 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of
-+ existing binaries are in this format.
++static uint8 crc8_table[256] = {
++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
++};
+
-+ If unsure, say Y.
++/*
++ * Search the name=value vars for a specific one and return its value.
++ * Returns NULL if not found.
++ */
++char*
++getvar(char *vars, char *name)
++{
++ char *s;
++ int len;
+
-+config MIPS32_N32
-+ bool "Kernel support for n32 binaries"
-+ depends on MIPS32_COMPAT
-+ help
-+ Select this option if you want to run n32 binaries. These are
-+ 64-bit binaries using 32-bit quantities for addressing and certain
-+ data that would normally be 64-bit. They are used in special
-+ cases.
++ len = strlen(name);
+
-+ If unsure, say N.
++ /* first look in vars[] */
++ for (s = vars; s && *s; ) {
++ if ((bcmp(s, name, len) == 0) && (s[len] == '='))
++ return (&s[len+1]);
+
-+config BINFMT_ELF32
-+ bool
-+ default y if MIPS32_O32 || MIPS32_N32
++ while (*s++)
++ ;
++ }
+
-+config PM
-+ bool "Power Management support (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL && MACH_AU1X00
++ /* then query nvram */
++ return (nvram_get(name));
++}
+
-+endmenu
++/*
++ * Search the vars for a specific one and return its value as
++ * an integer. Returns 0 if not found.
++ */
++int
++getintvar(char *vars, char *name)
++{
++ char *val;
+
-+source "drivers/Kconfig"
++ if ((val = getvar(vars, name)) == NULL)
++ return (0);
+
-+source "fs/Kconfig"
++ return (bcm_strtoul(val, NULL, 0));
++}
+
-+source "arch/mips/Kconfig.debug"
++void
++bcm_mdelay(uint ms)
++{
++ uint i;
+
-+source "security/Kconfig"
++ for (i = 0; i < ms; i++) {
++ OSL_DELAY(1000);
++ }
++}
+
-+source "crypto/Kconfig"
++#define CRC_INNER_LOOP(n, c, x) \
++ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
+
-+source "lib/Kconfig"
++uint8
++crc8(
++ uint8 *pdata, /* pointer to array of data to process */
++ uint nbytes, /* number of input data bytes to process */
++ uint8 crc /* either CRC8_INIT_VALUE or previous return value */
++)
++{
++ /* hard code the crc loop instead of using CRC_INNER_LOOP macro
++ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
++ while (nbytes-- > 0)
++ crc = crc8_table[(crc ^ *pdata++) & 0xff];
+
-+#
-+# Use the generic interrupt handling code in kernel/irq/:
-+#
-+config GENERIC_HARDIRQS
-+ bool
-+ default y
++ return crc;
++}
+
-+config GENERIC_IRQ_PROBE
-+ bool
-+ default y
++/*******************************************************************************
++ * crc16
++ *
++ * Computes a crc16 over the input data using the polynomial:
++ *
++ * x^16 + x^12 +x^5 + 1
++ *
++ * The caller provides the initial value (either CRC16_INIT_VALUE
++ * or the previous returned value) to allow for processing of
++ * discontiguous blocks of data. When generating the CRC the
++ * caller is responsible for complementing the final return value
++ * and inserting it into the byte stream. When checking, a final
++ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
++ *
++ * Reference: Dallas Semiconductor Application Note 27
++ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
++ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
++ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ *
++ ******************************************************************************/
+
-+config ISA_DMA_API
-+ bool
-+ default y
-diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile
---- linux-2.6.12.5/arch/mips/Makefile 2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/Makefile 2005-08-28 16:39:59.077334424 +0200
-@@ -79,7 +79,7 @@
- cflags-y += -I $(TOPDIR)/include/asm/gcc
- cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
- cflags-y += $(call cc-option, -finline-limit=100000)
--LDFLAGS_vmlinux += -G 0 -static -n
-+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
- MODFLAGS += -mlong-calls
-
- cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
-@@ -167,9 +167,10 @@
- $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \
- -Wa,--trap
-
--cflags-$(CONFIG_CPU_MIPS32) += \
-- $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-- -Wa,--trap
-+#cflags-$(CONFIG_CPU_MIPS32) += \
-+# $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-+# -Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32) += -mips2 -Wa,--trap
-
- cflags-$(CONFIG_CPU_MIPS64) += \
- $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-@@ -618,6 +619,14 @@
- load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
-
- #
-+# Broadcom BCM47XX boards
-+#
-+core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/
-+cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include
-+load-$(CONFIG_BCM947XX) := 0xffffffff80001000
++static uint16 crc16_table[256] = {
++ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
++ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
++ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
++ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
++ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
++ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
++ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
++ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
++ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
++ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
++ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
++ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
++ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
++ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
++ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
++ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
++ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
++ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
++ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
++ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
++ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
++ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
++ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
++ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
++ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
++ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
++ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
++ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
++ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
++ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
++ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
++ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
++};
+
++uint16
++crc16(
++ uint8 *pdata, /* pointer to array of data to process */
++ uint nbytes, /* number of input data bytes to process */
++ uint16 crc /* either CRC16_INIT_VALUE or previous return value */
++)
++{
++ while (nbytes-- > 0)
++ CRC_INNER_LOOP(16, crc, *pdata++);
++ return crc;
++}
+
-+#
- # SNI RM200 PCI
- #
- core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
-@@ -729,6 +738,7 @@
- archclean:
- @$(MAKE) $(clean)=arch/mips/boot
- @$(MAKE) $(clean)=arch/mips/lasat
-+ @$(MAKE) -C arch/mips/bcm47xx/compressed clean
-
- # Generate <asm/offset.h
- #
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile
---- linux-2.6.12.5/arch/mips/bcm947xx/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile 2005-08-28 11:12:20.406862800 +0200
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
++static uint32 crc32_table[256] = {
++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
++};
+
-+obj-y := irq.o int-handler.o prom.o setup.o time.o
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile 2005-08-28 11:12:20.407862648 +0200
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
++uint32
++crc32(
++ uint8 *pdata, /* pointer to array of data to process */
++ uint nbytes, /* number of input data bytes to process */
++ uint32 crc /* either CRC32_INIT_VALUE or previous return value */
++)
++{
++ uint8 *pend;
++#ifdef __mips__
++ uint8 tmp[4];
++ ulong *tptr = (ulong *)tmp;
+
-+obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c 2005-08-28 11:12:20.408862496 +0200
-@@ -0,0 +1,685 @@
++ /* in case the beginning of the buffer isn't aligned */
++ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
++ nbytes -= (pend - pdata);
++ while (pdata < pend)
++ CRC_INNER_LOOP(32, crc, *pdata++);
++
++ /* handle bulk of data as 32-bit words */
++ pend = pdata + (nbytes & 0xfffffffc);
++ while (pdata < pend) {
++ *tptr = *((ulong *)pdata)++;
++ CRC_INNER_LOOP(32, crc, tmp[0]);
++ CRC_INNER_LOOP(32, crc, tmp[1]);
++ CRC_INNER_LOOP(32, crc, tmp[2]);
++ CRC_INNER_LOOP(32, crc, tmp[3]);
++ }
++
++ /* 1-3 bytes at end of buffer */
++ pend = pdata + (nbytes & 0x03);
++ while (pdata < pend)
++ CRC_INNER_LOOP(32, crc, *pdata++);
++#else
++ pend = pdata + nbytes;
++ while (pdata < pend)
++ CRC_INNER_LOOP(32, crc, *pdata++);
++#endif
++
++ return crc;
++}
++
++#ifdef notdef
++#define CLEN 1499
++#define CBUFSIZ (CLEN+4)
++#define CNBUFS 5
++
++void testcrc32(void)
++{
++ uint j,k,l;
++ uint8 *buf;
++ uint len[CNBUFS];
++ uint32 crcr;
++ uint32 crc32tv[CNBUFS] =
++ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
++
++ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
++
++ /* step through all possible alignments */
++ for (l=0;l<=4;l++) {
++ for (j=0; j<CNBUFS; j++) {
++ len[j] = CLEN;
++ for (k=0; k<len[j]; k++)
++ *(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
++ }
++
++ for (j=0; j<CNBUFS; j++) {
++ crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
++ ASSERT(crcr == crc32tv[j]);
++ }
++ }
++
++ MFREE(buf, CBUFSIZ*CNBUFS);
++ return;
++}
++#endif
++
++
++
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c 2005-08-28 11:12:20.430859152 +0200
+@@ -0,0 +1,763 @@
+/*
-+ * Misc useful routines to access NIC SROM
++ * Generic Broadcom Home Networking Division (HND) DMA module.
++ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmsrom.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ *
++ * $Id: hnddma.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
+ */
+
+#include <typedefs.h>
+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmsrom.h>
-+#include <bcmdevs.h>
+#include <bcmendian.h>
-+#include <sbpcmcia.h>
-+#include <pcicfg.h>
++#include <bcmutils.h>
+
-+#include <proto/ethernet.h> /* for sprom content groking */
++struct dma_info; /* forward declaration */
++#define di_t struct dma_info
++#include <hnddma.h>
+
-+#define VARS_MAX 4096 /* should be reduced */
++/* debug/trace */
++#define DMA_ERROR(args)
++#define DMA_TRACE(args)
+
-+static int initvars_srom_pci(void *curmap, char **vars, int *count);
-+static int initvars_cis_pcmcia(void *osh, char **vars, int *count);
-+static int sprom_cmd_pcmcia(void *osh, uint8 cmd);
-+static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data);
-+static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data);
-+static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc);
++/* default dma message level(if input msg_level pointer is null in dma_attach()) */
++static uint dma_msg_level = 0;
+
-+/*
-+ * Initialize the vars from the right source for this platform.
-+ * Return 0 on success, nonzero on error.
-+ */
-+int
-+srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count)
-+{
-+ if (vars == NULL)
-+ return (0);
++#define MAXNAMEL 8
++#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t))
+
-+ switch (bus) {
-+ case SB_BUS:
-+ /* These two could be asserts ... */
-+ *vars = NULL;
-+ *count = 0;
-+ return(0);
++/* dma engine software state */
++typedef struct dma_info {
++ hnddma_t hnddma; /* exported structure */
++ uint *msg_level; /* message level pointer */
+
-+ case PCI_BUS:
-+ ASSERT(curmap); /* can not be NULL */
-+ return(initvars_srom_pci(curmap, vars, count));
++ char name[MAXNAMEL]; /* callers name for diag msgs */
++ void *drv; /* driver handle */
++ void *dev; /* device handle */
++ dmaregs_t *regs; /* dma engine registers */
+
-+ case PCMCIA_BUS:
-+ return(initvars_cis_pcmcia(osh, vars, count));
++ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */
++ uint txin; /* index of next descriptor to reclaim */
++ uint txout; /* index of next descriptor to post */
++ uint txavail; /* # free tx descriptors */
++ void *txp[MAXDD]; /* parallel array of pointers to packets */
++ ulong txdpa; /* physical address of descriptor ring */
++ uint txdalign; /* #bytes added to alloc'd mem to align txd */
++
++ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */
++ uint rxin; /* index of next descriptor to reclaim */
++ uint rxout; /* index of next descriptor to post */
++ void *rxp[MAXDD]; /* parallel array of pointers to packets */
++ ulong rxdpa; /* physical address of descriptor ring */
++ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */
+
++ /* tunables */
++ uint ntxd; /* # tx descriptors */
++ uint nrxd; /* # rx descriptors */
++ uint rxbufsize; /* rx buffer size in bytes */
++ uint nrxpost; /* # rx buffers to keep posted */
++ uint rxoffset; /* rxcontrol offset */
++ uint ddoffset; /* add to get dma address of descriptor ring */
++ uint dataoffset; /* add to get dma address of data buffer */
++} dma_info_t;
+
-+ default:
-+ ASSERT(0);
-+ }
-+ return (-1);
-+}
++/* descriptor bumping macros */
++#define NEXTTXD(i) ((i + 1) & (di->ntxd - 1))
++#define PREVTXD(i) ((i - 1) & (di->ntxd - 1))
++#define NEXTRXD(i) ((i + 1) & (di->nrxd - 1))
++#define NTXDACTIVE(h, t) ((t - h) & (di->ntxd - 1))
++#define NRXDACTIVE(h, t) ((t - h) & (di->nrxd - 1))
+
++/* macros to convert between byte offsets and indexes */
++#define B2I(bytes) ((bytes) / sizeof (dmadd_t))
++#define I2B(index) ((index) * sizeof (dmadd_t))
+
-+/* support only 16-bit word read from srom */
-+int
-+srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++void*
++dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
++ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
+{
-+ void *srom;
-+ uint i, off, nw;
++ dma_info_t *di;
++ void *va;
+
-+ /* check input - 16-bit access only */
-+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+ return 1;
++ ASSERT(ntxd <= MAXDD);
++ ASSERT(nrxd <= MAXDD);
+
-+ if (bus == PCI_BUS) {
-+ if (!curmap)
-+ return 1;
-+ srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
-+ if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE))
-+ return 1;
-+ } else if (bus == PCMCIA_BUS) {
-+ off = byteoff / 2;
-+ nw = nbytes / 2;
-+ for (i = 0; i < nw; i++) {
-+ if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
-+ return 1;
-+ }
-+ } else {
-+ return 1;
-+ }
++ /* allocate private info structure */
++ if ((di = MALLOC(sizeof (dma_info_t))) == NULL)
++ return (NULL);
++ bzero((char*)di, sizeof (dma_info_t));
+
-+ return 0;
-+}
++ /* set message level */
++ di->msg_level = msg_level ? msg_level : &dma_msg_level;
+
-+/* support only 16-bit word write into srom */
-+int
-+srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+ uint16 *srom;
-+ uint i, off, nw, crc_range;
-+ uint16 image[SPROM_SIZE], *p;
-+ uint8 crc;
-+ volatile uint32 val32;
++ DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset));
+
-+ /* check input - 16-bit access only */
-+ if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+ return 1;
++ /* make a private copy of our callers name */
++ strncpy(di->name, name, MAXNAMEL);
++ di->name[MAXNAMEL-1] = '\0';
+
-+ crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
++ di->drv = drv;
++ di->dev = dev;
++ di->regs = regs;
+
-+ /* if changes made inside crc cover range */
-+ if (byteoff < crc_range) {
-+ nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
-+ /* read data including entire first 64 words from srom */
-+ if (srom_read(bus, curmap, osh, 0, nw * 2, image))
-+ return 1;
-+ /* make changes */
-+ bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
-+ /* calculate crc */
-+ htol16_buf(image, crc_range);
-+ crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
-+ ltoh16_buf(image, crc_range);
-+ image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
-+ p = image;
-+ off = 0;
-+ } else {
-+ p = buf;
-+ off = byteoff / 2;
-+ nw = nbytes / 2;
++ /* allocate transmit descriptor ring */
++ if (ntxd) {
++ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL)
++ goto fail;
++ di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
++ di->txdalign = ((uint)di->txd - (uint)va);
++ di->txdpa = di->txdpa + di->txdalign;
++ ASSERT(ISALIGNED(di->txd, DMARINGALIGN));
+ }
+
-+ if (bus == PCI_BUS) {
-+ srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
-+ /* enable writes to the SPROM */
-+ val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
-+ val32 |= SPROM_WRITEEN;
-+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
-+ bcm_mdelay(500);
-+ /* write srom */
-+ for (i = 0; i < nw; i++) {
-+ W_REG(&srom[off + i], p[i]);
-+ bcm_mdelay(20);
-+ }
-+ /* disable writes to the SPROM */
-+ OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
-+ } else if (bus == PCMCIA_BUS) {
-+ /* enable writes to the SPROM */
-+ if (sprom_cmd_pcmcia(osh, SROM_WEN))
-+ return 1;
-+ bcm_mdelay(500);
-+ /* write srom */
-+ for (i = 0; i < nw; i++) {
-+ sprom_write_pcmcia(osh, (uint16)(off + i), p[i]);
-+ bcm_mdelay(20);
-+ }
-+ /* disable writes to the SPROM */
-+ if (sprom_cmd_pcmcia(osh, SROM_WDS))
-+ return 1;
-+ } else {
-+ return 1;
++ /* allocate receive descriptor ring */
++ if (nrxd) {
++ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL)
++ goto fail;
++ di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
++ di->rxdalign = ((uint)di->rxd - (uint)va);
++ di->rxdpa = di->rxdpa + di->rxdalign;
++ ASSERT(ISALIGNED(di->rxd, DMARINGALIGN));
+ }
+
-+ bcm_mdelay(500);
-+ return 0;
-+}
++ /* save tunables */
++ di->ntxd = ntxd;
++ di->nrxd = nrxd;
++ di->rxbufsize = rxbufsize;
++ di->nrxpost = nrxpost;
++ di->rxoffset = rxoffset;
++ di->ddoffset = ddoffset;
++ di->dataoffset = dataoffset;
++
++ return ((void*)di);
+
++fail:
++ dma_detach((void*)di);
++ return (NULL);
++}
+
-+int
-+srom_parsecis(uint8 *cis, char **vars, int *count)
++/* may be called with core in reset */
++void
++dma_detach(dma_info_t *di)
+{
-+ char eabuf[32];
-+ char *vp, *base;
-+ uint8 tup, tlen, sromrev = 1;
-+ int i, j;
-+ uint varsize;
-+ bool ag_init = FALSE;
-+ uint16 w;
++ if (di == NULL)
++ return;
+
-+ ASSERT(vars);
-+ ASSERT(count);
++ DMA_TRACE(("%s: dma_detach\n", di->name));
+
-+ base = vp = MALLOC(VARS_MAX);
-+ ASSERT(vp);
++ /* shouldn't be here if descriptors are unreclaimed */
++ ASSERT(di->txin == di->txout);
++ ASSERT(di->rxin == di->rxout);
+
-+ i = 0;
-+ do {
-+ tup = cis[i++];
-+ tlen = cis[i++];
++ /* free dma descriptor rings */
++ if (di->txd)
++ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa);
++ if (di->rxd)
++ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa);
+
-+ switch (tup) {
-+ case CISTPL_MANFID:
-+ vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
-+ vp++;
-+ vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
-+ vp++;
-+ break;
++ /* free our private info structure */
++ MFREE((void*)di, sizeof (dma_info_t));
++}
+
-+ case CISTPL_FUNCE:
-+ if (cis[i] == LAN_NID) {
-+ ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
-+ bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
-+ vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+ vp++;
-+ }
-+ break;
-+
-+ case CISTPL_CFTABLE:
-+ vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
-+ vp++;
-+ break;
-+
-+ case CISTPL_BRCM_HNBU:
-+ switch (cis[i]) {
-+ case HNBU_CHIPID:
-+ vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
-+ vp++;
-+ vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]);
-+ vp++;
-+ if (tlen == 7) {
-+ vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]);
-+ vp++;
-+ }
-+ break;
+
-+ case HNBU_BOARDREV:
-+ vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
-+ vp++;
-+ break;
++void
++dma_txreset(dma_info_t *di)
++{
++ uint32 status;
+
-+ case HNBU_AA:
-+ vp += sprintf(vp, "aa0=%d", cis[i + 1]);
-+ vp++;
-+ break;
++ DMA_TRACE(("%s: dma_txreset\n", di->name));
+
-+ case HNBU_AG:
-+ vp += sprintf(vp, "ag0=%d", cis[i + 1]);
-+ vp++;
-+ ag_init = TRUE;
-+ break;
++ /* suspend tx DMA first */
++ W_REG(&di->regs->xmtcontrol, XC_SE);
++ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED &&
++ status != XS_XS_IDLE &&
++ status != XS_XS_STOPPED,
++ 10000);
+
-+ case HNBU_CC:
-+ vp += sprintf(vp, "cc=%d", cis[i + 1]);
-+ vp++;
-+ break;
++ W_REG(&di->regs->xmtcontrol, 0);
++ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED,
++ 10000);
+
-+ case HNBU_PAPARMS:
-+ vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]);
-+ vp++;
-+ if (tlen == 9) {
-+ /* New version */
-+ for (j = 0; j < 3; j++) {
-+ vp += sprintf(vp, "pa0b%d=%d", j,
-+ (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
-+ vp++;
-+ }
-+ vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
-+ vp++;
-+ }
-+ break;
++ if (status != XS_XS_DISABLED) {
++ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
++ }
+
-+ case HNBU_OEM:
-+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+ cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
-+ cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
-+ vp++;
-+ break;
-+ case HNBU_BOARDFLAGS:
-+ w = (cis[i + 2] << 8) + cis[i + 1];
-+ if (w == 0xffff) w = 0;
-+ vp += sprintf(vp, "boardflags=%d", w);
-+ vp++;
-+ break;
-+ case HNBU_LED:
-+ if (cis[i + 1] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
-+ vp++;
-+ }
-+ if (cis[i + 2] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]);
-+ vp++;
-+ }
-+ if (cis[i + 3] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]);
-+ vp++;
-+ }
-+ if (cis[i + 4] != 0xff) {
-+ vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]);
-+ vp++;
-+ }
-+ break;
-+ }
-+ break;
++ /* wait for the last transaction to complete */
++ OSL_DELAY(300);
++}
+
-+ }
-+ i += tlen;
-+ } while (tup != 0xff);
++void
++dma_rxreset(dma_info_t *di)
++{
++ uint32 status;
+
-+ /* Set the srom version */
-+ vp += sprintf(vp, "sromrev=%d", sromrev);
-+ vp++;
++ DMA_TRACE(("%s: dma_rxreset\n", di->name));
+
-+ /* For now just set boardflags2 to zero */
-+ vp += sprintf(vp, "boardflags2=0");
-+ vp++;
++ W_REG(&di->regs->rcvcontrol, 0);
++ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED,
++ 10000);
+
-+ /* if there is no antenna gain field, set default */
-+ if (ag_init == FALSE) {
-+ vp += sprintf(vp, "ag0=%d", 0xff);
-+ vp++;
++ if (status != RS_RS_DISABLED) {
++ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
+ }
++}
+
-+ /* final nullbyte terminator */
-+ *vp++ = '\0';
-+ varsize = (uint)vp - (uint)base;
++void
++dma_txinit(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_txinit\n", di->name));
+
-+ ASSERT(varsize < VARS_MAX);
++ di->txin = di->txout = 0;
++ di->txavail = di->ntxd - 1;
+
-+ if (varsize == VARS_MAX) {
-+ *vars = base;
-+ } else {
-+ vp = MALLOC(varsize);
-+ ASSERT(vp);
-+ bcopy(base, vp, varsize);
-+ MFREE(base, VARS_MAX);
-+ *vars = vp;
-+ }
-+ *count = varsize;
++ /* clear tx descriptor ring */
++ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t)));
+
-+ return (0);
++ W_REG(&di->regs->xmtcontrol, XC_XE);
++ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset));
+}
+
-+
-+/* set PCMCIA sprom command register */
-+static int
-+sprom_cmd_pcmcia(void *osh, uint8 cmd)
++bool
++dma_txenabled(dma_info_t *di)
+{
-+ uint8 status;
-+ uint wait_cnt = 1000;
++ uint32 xc;
+
-+ /* write sprom command register */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
++ /* If the chip is dead, it is not enabled :-) */
++ xc = R_REG(&di->regs->xmtcontrol);
++ return ((xc != 0xffffffff) && (xc & XC_XE));
++}
+
-+ /* wait status */
-+ while (wait_cnt--) {
-+ OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
-+ if (status & SROM_DONE)
-+ return 0;
-+ }
-+ return 1;
++void
++dma_txsuspend(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_txsuspend\n", di->name));
++ OR_REG(&di->regs->xmtcontrol, XC_SE);
+}
+
-+/* read a word from the PCMCIA srom */
-+static int
-+sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data)
++void
++dma_txresume(dma_info_t *di)
+{
-+ uint8 addr_l, addr_h, data_l, data_h;
++ DMA_TRACE(("%s: dma_txresume\n", di->name));
++ AND_REG(&di->regs->xmtcontrol, ~XC_SE);
++}
+
-+ addr_l = (uint8)((addr * 2) & 0xff);
-+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
++bool
++dma_txsuspended(dma_info_t *di)
++{
++ uint32 xc;
++ uint32 xs;
+
-+ /* set address */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++ xc = R_REG(&di->regs->xmtcontrol);
++ if (xc & XC_SE) {
++ xs = R_REG(&di->regs->xmtstatus);
++ return ((xs & XS_XS_MASK) == XS_XS_IDLE);
++ }
++ return 0;
++}
+
-+ /* do read */
-+ if (sprom_cmd_pcmcia(osh, SROM_READ))
-+ return 1;
++bool
++dma_txstopped(dma_info_t *di)
++{
++ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED);
++}
+
-+ /* read data */
-+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
-+ OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
++bool
++dma_rxstopped(dma_info_t *di)
++{
++ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED);
++}
+
-+ *data = (data_h << 8) | data_l;
-+ return 0;
++void
++dma_fifoloopbackenable(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
++ OR_REG(&di->regs->xmtcontrol, XC_LE);
+}
+
-+/* write a word to the PCMCIA srom */
-+static int
-+sprom_write_pcmcia(void *osh, uint16 addr, uint16 data)
++void
++dma_rxinit(dma_info_t *di)
+{
-+ uint8 addr_l, addr_h, data_l, data_h;
++ DMA_TRACE(("%s: dma_rxinit\n", di->name));
+
-+ addr_l = (uint8)((addr * 2) & 0xff);
-+ addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
-+ data_l = (uint8)(data & 0xff);
-+ data_h = (uint8)((data >> 8) & 0xff);
++ di->rxin = di->rxout = 0;
+
-+ /* set address */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++ /* clear rx descriptor ring */
++ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t)));
+
-+ /* write data */
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
-+ OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
++ dma_rxenable(di);
++ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset));
++}
+
-+ /* do write */
-+ return sprom_cmd_pcmcia(osh, SROM_WRITE);
++void
++dma_rxenable(dma_info_t *di)
++{
++ DMA_TRACE(("%s: dma_rxenable\n", di->name));
++ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
+}
+
-+/*
-+ * Read in and validate sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc)
++bool
++dma_rxenabled(dma_info_t *di)
+{
-+ int off, nw;
-+ uint8 chk8;
-+ int i;
-+
-+ off = byteoff / 2;
-+ nw = ROUNDUP(nbytes, 2) / 2;
-+
-+ /* read the sprom */
-+ for (i = 0; i < nw; i++)
-+ buf[i] = R_REG(&sprom[off + i]);
-+
-+ if (check_crc) {
-+ /* fixup the endianness so crc8 will pass */
-+ htol16_buf(buf, nw * 2);
-+ if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE)
-+ return (1);
-+ /* now correct the endianness of the byte array */
-+ ltoh16_buf(buf, nw * 2);
-+ }
++ uint32 rc;
+
-+ return (0);
++ rc = R_REG(&di->regs->rcvcontrol);
++ return ((rc != 0xffffffff) && (rc & RC_RE));
+}
+
+/*
-+ * Initialize nonvolatile variable table from sprom.
-+ * Return 0 on success, nonzero on error.
++ * The BCM47XX family supports full 32bit dma engine buffer addressing so
++ * dma buffers can cross 4 Kbyte page boundaries.
+ */
-+
-+static int
-+initvars_srom_pci(void *curmap, char **vars, int *count)
++int
++dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
+{
-+ uint16 w, b[64];
-+ uint8 sromrev;
-+ struct ether_addr ea;
-+ char eabuf[32];
-+ int c, woff, i;
-+ char *vp, *base;
++ void *p, *next;
++ uchar *data;
++ uint len;
++ uint txout;
++ uint32 ctrl;
++ uint32 pa;
+
-+ if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE))
-+ return (-1);
++ DMA_TRACE(("%s: dma_txfast\n", di->name));
+
-+ /* top word of sprom contains version and crc8 */
-+ sromrev = b[63] & 0xff;
-+ if ((sromrev != 1) && (sromrev != 2)) {
-+ return (-2);
-+ }
++ txout = di->txout;
++ ctrl = 0;
+
-+ ASSERT(vars);
-+ ASSERT(count);
++ /*
++ * Walk the chain of packet buffers
++ * allocating and initializing transmit descriptor entries.
++ */
++ for (p = p0; p; p = next) {
++ data = PKTDATA(di->drv, p);
++ len = PKTLEN(di->drv, p);
++ next = PKTNEXT(di->drv, p);
+
-+ base = vp = MALLOC(VARS_MAX);
-+ ASSERT(vp);
++ /* return nonzero if out of tx descriptors */
++ if (NEXTTXD(txout) == di->txin)
++ goto outoftxd;
+
-+ vp += sprintf(vp, "sromrev=%d", sromrev);
-+ vp++;
++ if (len == 0)
++ continue;
+
-+ if (sromrev >= 2) {
-+ /* New section takes over the 4th hardware function space */
++ /* get physical address of buffer start */
++ pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p);
+
-+ /* Word 28 is boardflags2 */
-+ vp += sprintf(vp, "boardflags2=%d", b[28]);
-+ vp++;
++ /* build the descriptor control value */
++ ctrl = len & CTRL_BC_MASK;
+
-+ /* Word 29 is max power 11a high/low */
-+ w = b[29];
-+ vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
-+ vp++;
-+ vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
-+ vp++;
++ ctrl |= coreflags;
++
++ if (p == p0)
++ ctrl |= CTRL_SOF;
++ if (next == NULL)
++ ctrl |= (CTRL_IOC | CTRL_EOF);
++ if (txout == (di->ntxd - 1))
++ ctrl |= CTRL_EOT;
+
-+ /* Words 30-32 set the 11alow pa settings,
-+ * 33-35 are the 11ahigh ones.
-+ */
-+ for (i = 0; i < 3; i++) {
-+ vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
-+ vp++;
-+ vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
-+ vp++;
-+ }
-+ w = b[59];
-+ if (w == 0)
-+ vp += sprintf(vp, "ccode=");
-+ else
-+ vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
-+ vp++;
++ /* init the tx descriptor */
++ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
++ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
+
++ ASSERT(di->txp[txout] == NULL);
++
++ txout = NEXTTXD(txout);
+ }
+
-+ /* parameter section of sprom starts at byte offset 72 */
-+ woff = 72/2;
++ /* if last txd eof not set, fix it */
++ if (!(ctrl & CTRL_EOF))
++ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
+
-+ /* first 6 bytes are il0macaddr */
-+ ea.octet[0] = (b[woff] >> 8) & 0xff;
-+ ea.octet[1] = b[woff] & 0xff;
-+ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+ ea.octet[3] = b[woff+1] & 0xff;
-+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
-+ bcm_ether_ntoa((uchar*)&ea, eabuf);
-+ vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+ vp++;
++ /* save the packet */
++ di->txp[PREVTXD(txout)] = p0;
+
-+ /* next 6 bytes are et0macaddr */
-+ ea.octet[0] = (b[woff] >> 8) & 0xff;
-+ ea.octet[1] = b[woff] & 0xff;
-+ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+ ea.octet[3] = b[woff+1] & 0xff;
-+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
-+ bcm_ether_ntoa((uchar*)&ea, eabuf);
-+ vp += sprintf(vp, "et0macaddr=%s", eabuf);
-+ vp++;
++ /* bump the tx descriptor index */
++ di->txout = txout;
+
-+ /* next 6 bytes are et1macaddr */
-+ ea.octet[0] = (b[woff] >> 8) & 0xff;
-+ ea.octet[1] = b[woff] & 0xff;
-+ ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+ ea.octet[3] = b[woff+1] & 0xff;
-+ ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+ ea.octet[5] = b[woff+2] & 0xff;
-+ woff += ETHER_ADDR_LEN/2 ;
-+ bcm_ether_ntoa((uchar*)&ea, eabuf);
-+ vp += sprintf(vp, "et1macaddr=%s", eabuf);
-+ vp++;
++ /* kick the chip */
++ W_REG(&di->regs->xmtptr, I2B(txout));
+
-+ /*
-+ * Enet phy settings one or two singles or a dual
-+ * Bits 4-0 : MII address for enet0 (0x1f for not there)
-+ * Bits 9-5 : MII address for enet1 (0x1f for not there)
-+ * Bit 14 : Mdio for enet0
-+ * Bit 15 : Mdio for enet1
-+ */
-+ w = b[woff];
-+ vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
-+ vp++;
-+ vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
-+ vp++;
-+ vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
-+ vp++;
-+ vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
-+ vp++;
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
-+ /* Word 46 has board rev, antennas 0/1 & Country code/control */
-+ w = b[46];
-+ vp += sprintf(vp, "boardrev=%d", w & 0xff);
-+ vp++;
++ return (0);
+
-+ if (sromrev > 1)
-+ vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
-+ else
-+ vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
-+ vp++;
++outoftxd:
++ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
++ PKTFREE(di->drv, p0, TRUE);
++ di->txavail = 0;
++ di->hnddma.txnobuf++;
++ return (-1);
++}
+
-+ vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
-+ vp++;
++#define PAGESZ 4096
++#define PAGEBASE(x) ((uint)(x) & ~4095)
+
-+ vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
-+ vp++;
++/*
++ * Just like above except go through the extra effort of splitting
++ * buffers that cross 4Kbyte boundaries into multiple tx descriptors.
++ */
++int
++dma_tx(dma_info_t *di, void *p0, uint32 coreflags)
++{
++ void *p, *next;
++ uchar *data;
++ uint plen, len;
++ uchar *page, *start, *end;
++ uint txout;
++ uint32 ctrl;
++ uint32 pa;
+
-+ /* Words 47-49 set the (wl) pa settings */
-+ woff = 47;
++ DMA_TRACE(("%s: dma_tx\n", di->name));
+
-+ for (i = 0; i < 3; i++) {
-+ vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
-+ vp++;
-+ vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
-+ vp++;
-+ }
++ txout = di->txout;
++ ctrl = 0;
+
+ /*
-+ * Words 50-51 set the customer-configured wl led behavior.
-+ * 8 bits/gpio pin. High bit: activehi=0, activelo=1;
-+ * LED behavior values defined in wlioctl.h .
++ * Walk the chain of packet buffers
++ * splitting those that cross 4 Kbyte boundaries
++ * allocating and initializing transmit descriptor entries.
+ */
-+ w = b[50];
-+ if ((w != 0) && (w != 0xffff)) {
-+ /* gpio0 */
-+ vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
-+ vp++;
++ for (p = p0; p; p = next) {
++ data = PKTDATA(di->drv, p);
++ plen = PKTLEN(di->drv, p);
++ next = PKTNEXT(di->drv, p);
+
-+ /* gpio1 */
-+ vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
-+ vp++;
-+ }
-+ w = b[51];
-+ if ((w != 0) && (w != 0xffff)) {
-+ /* gpio2 */
-+ vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
-+ vp++;
++ if (plen == 0)
++ continue;
+
-+ /* gpio3 */
-+ vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
-+ vp++;
-+ }
-+
-+ /* Word 52 is max power 0/1 */
-+ w = b[52];
-+ vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
-+ vp++;
-+ vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
-+ vp++;
++ for (page = (uchar*)PAGEBASE(data);
++ page <= (uchar*)PAGEBASE(data + plen - 1);
++ page += PAGESZ) {
+
-+ /* Word 56 is idle tssi target 0/1 */
-+ w = b[56];
-+ vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
-+ vp++;
-+ vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
-+ vp++;
++ /* return nonzero if out of tx descriptors */
++ if (NEXTTXD(txout) == di->txin)
++ goto outoftxd;
+
-+ /* Word 57 is boardflags, if not programmed make it zero */
-+ w = b[57];
-+ if (w == 0xffff) w = 0;
-+ vp += sprintf(vp, "boardflags=%d", w);
-+ vp++;
++ start = (page == (uchar*)PAGEBASE(data))? data: page;
++ end = (page == (uchar*)PAGEBASE(data + plen))?
++ (data + plen): (page + PAGESZ);
++ len = end - start;
+
-+ /* Word 58 is antenna gain 0/1 */
-+ w = b[58];
-+ vp += sprintf(vp, "ag0=%d", w & 0xff);
-+ vp++;
++ /* build the descriptor control value */
++ ctrl = len & CTRL_BC_MASK;
+
-+ vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
-+ vp++;
++ ctrl |= coreflags;
+
-+ if (sromrev == 1) {
-+ /* set the oem string */
-+ vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+ ((b[59] >> 8) & 0xff), (b[59] & 0xff),
-+ ((b[60] >> 8) & 0xff), (b[60] & 0xff),
-+ ((b[61] >> 8) & 0xff), (b[61] & 0xff),
-+ ((b[62] >> 8) & 0xff), (b[62] & 0xff));
-+ vp++;
-+ }
++ if ((p == p0) && (start == data))
++ ctrl |= CTRL_SOF;
++ if ((next == NULL) && (end == (data + plen)))
++ ctrl |= (CTRL_IOC | CTRL_EOF);
++ if (txout == (di->ntxd - 1))
++ ctrl |= CTRL_EOT;
+
-+ /* final nullbyte terminator */
-+ *vp++ = '\0';
++ /* get physical address of buffer start */
++ pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p);
+
-+ c = vp - base;
-+ ASSERT(c <= VARS_MAX);
++ /* init the tx descriptor */
++ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
++ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
+
-+ if (c == VARS_MAX) {
-+ *vars = base;
-+ } else {
-+ vp = MALLOC(c);
-+ ASSERT(vp);
-+ bcopy(base, vp, c);
-+ MFREE(base, VARS_MAX);
-+ *vars = vp;
++ ASSERT(di->txp[txout] == NULL);
++
++ txout = NEXTTXD(txout);
++ }
+ }
-+ *count = c;
+
-+ return (0);
-+}
++ /* if last txd eof not set, fix it */
++ if (!(ctrl & CTRL_EOF))
++ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
+
-+/*
-+ * Read the cis and call parsecis to initialize the vars.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+initvars_cis_pcmcia(void *osh, char **vars, int *count)
-+{
-+ uint8 *cis = NULL;
-+ int rc;
++ /* save the packet */
++ di->txp[PREVTXD(txout)] = p0;
+
-+ if ((cis = MALLOC(CIS_SIZE)) == NULL)
-+ return (-1);
++ /* bump the tx descriptor index */
++ di->txout = txout;
+
-+ OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE);
++ /* kick the chip */
++ W_REG(&di->regs->xmtptr, I2B(txout));
+
-+ rc = srom_parsecis(cis, vars, count);
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
-+ MFREE(cis, CIS_SIZE);
++ return (0);
+
-+ return (rc);
++outoftxd:
++ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name));
++ PKTFREE(di->drv, p0, TRUE);
++ di->txavail = 0;
++ di->hnddma.txnobuf++;
++ return (-1);
+}
+
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c 2005-08-28 11:12:20.428859456 +0200
-@@ -0,0 +1,691 @@
-+/*
-+ * Misc useful OS-independent routines.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmendian.h>
-+#include <bcmnvram.h>
-+
-+unsigned char bcm_ctype[] = {
-+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */
-+ _BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C, /* 8-15 */
-+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */
-+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */
-+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */
-+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */
-+ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */
-+ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */
-+ _BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U, /* 64-71 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */
-+ _BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L, /* 96-103 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */
-+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */
-+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */
-+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 160-175 */
-+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 176-191 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 192-207 */
-+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L, /* 208-223 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 224-239 */
-+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L /* 240-255 */
-+};
-+
-+uchar
-+bcm_toupper(uchar c)
++/* returns a pointer to the next frame received, or NULL if there are no more */
++void*
++dma_rx(dma_info_t *di)
+{
-+ if (bcm_islower(c))
-+ c -= 'a'-'A';
-+ return (c);
-+}
++ void *p;
++ uint len;
++ int skiplen = 0;
+
-+ulong
-+bcm_strtoul(char *cp, char **endp, uint base)
-+{
-+ ulong result, value;
-+ bool minus;
-+
-+ minus = FALSE;
++ while ((p = dma_getnextrxp(di, FALSE))) {
++ /* skip giant packets which span multiple rx descriptors */
++ if (skiplen > 0) {
++ skiplen -= di->rxbufsize;
++ if (skiplen < 0)
++ skiplen = 0;
++ PKTFREE(di->drv, p, FALSE);
++ continue;
++ }
+
-+ while (bcm_isspace(*cp))
-+ cp++;
-+
-+ if (cp[0] == '+')
-+ cp++;
-+ else if (cp[0] == '-') {
-+ minus = TRUE;
-+ cp++;
-+ }
-+
-+ if (base == 0) {
-+ if (cp[0] == '0') {
-+ if ((cp[1] == 'x') || (cp[1] == 'X')) {
-+ base = 16;
-+ cp = &cp[2];
-+ } else {
-+ base = 8;
-+ cp = &cp[1];
-+ }
-+ } else
-+ base = 10;
-+ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
-+ cp = &cp[2];
-+ }
-+
-+ result = 0;
++ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p)));
++ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
+
-+ while (bcm_isxdigit(*cp) &&
-+ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
-+ result = result*base + value;
-+ cp++;
-+ }
++ /* bad frame length check */
++ if (len > (di->rxbufsize - di->rxoffset)) {
++ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
++ if (len > 0)
++ skiplen = len - (di->rxbufsize - di->rxoffset);
++ PKTFREE(di->drv, p, FALSE);
++ di->hnddma.rxgiants++;
++ continue;
++ }
+
-+ if (minus)
-+ result = (ulong)(result * -1);
++ /* set actual length */
++ PKTSETLEN(di->drv, p, (di->rxoffset + len));
+
-+ if (endp)
-+ *endp = (char *)cp;
++ break;
++ }
+
-+ return (result);
++ return (p);
+}
+
-+uint
-+bcm_atoi(char *s)
++/* post receive buffers */
++void
++dma_rxfill(dma_info_t *di)
+{
++ void *p;
++ uint rxin, rxout;
++ uint ctrl;
+ uint n;
++ uint i;
++ uint32 pa;
++ uint rxbufsize;
+
-+ n = 0;
++ /*
++ * Determine how many receive buffers we're lacking
++ * from the full complement, allocate, initialize,
++ * and post them, then update the chip rx lastdscr.
++ */
+
-+ while (bcm_isdigit(*s))
-+ n = (n * 10) + *s++ - '0';
-+ return (n);
-+}
++ rxin = di->rxin;
++ rxout = di->rxout;
++ rxbufsize = di->rxbufsize;
+
-+void
-+deadbeef(char *p, uint len)
-+{
-+ static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef };
++ n = di->nrxpost - NRXDACTIVE(rxin, rxout);
+
-+ while (len-- > 0) {
-+ *p = meat[((uint)p) & 3];
-+ p++;
-+ }
-+}
++ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
+
-+/* pretty hex print a contiguous buffer */
-+void
-+prhex(char *msg, uchar *buf, uint nbytes)
-+{
-+ char line[256];
-+ char* p;
-+ uint i;
++ for (i = 0; i < n; i++) {
++ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) {
++ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
++ di->hnddma.rxnobuf++;
++ break;
++ }
+
-+ if (msg && (msg[0] != '\0'))
-+ printf("%s: ", msg);
++ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0;
+
-+ p = line;
-+ for (i = 0; i < nbytes; i++) {
-+ if (i % 16 == 0) {
-+ p += sprintf(p, "%04d: ", i); /* line prefix */
-+ }
-+ p += sprintf(p, "%02x ", buf[i]);
-+ if (i % 16 == 15) {
-+ printf("%s\n", line); /* flush line */
-+ p = line;
-+ }
++ pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p);
++ ASSERT(ISALIGNED(pa, 4));
++
++ /* save the free packet pointer */
++ ASSERT(di->rxp[rxout] == NULL);
++ di->rxp[rxout] = p;
++
++ /* prep the descriptor control value */
++ ctrl = rxbufsize;
++ if (rxout == (di->nrxd - 1))
++ ctrl |= CTRL_EOT;
++
++ /* init the rx descriptor */
++ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl));
++ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset));
++
++ rxout = NEXTRXD(rxout);
+ }
+
-+ /* flush last partial line */
-+ if (p != line)
-+ printf("%s\n", line);
++ di->rxout = rxout;
++
++ /* update the chip lastdscr pointer */
++ W_REG(&di->regs->rcvptr, I2B(rxout));
+}
+
-+/* pretty hex print a pkt buffer chain */
+void
-+prpkt(char *msg, void *drv, void *p0)
++dma_txreclaim(dma_info_t *di, bool forceall)
+{
+ void *p;
+
-+ if (msg && (msg[0] != '\0'))
-+ printf("%s: ", msg);
++ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
+
-+ for (p = p0; p; p = PKTNEXT(drv, p))
-+ prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p));
++ while ((p = dma_getnexttxp(di, forceall)))
++ PKTFREE(di->drv, p, TRUE);
+}
+
-+/* copy a pkt buffer chain into a buffer */
-+uint
-+pktcopy(void *drv, void *p, uint offset, int len, uchar *buf)
++/*
++ * Reclaim next completed txd (txds if using chained buffers) and
++ * return associated packet.
++ * If 'force' is true, reclaim txd(s) and return associated packet
++ * regardless of the value of the hardware "curr" pointer.
++ */
++void*
++dma_getnexttxp(dma_info_t *di, bool forceall)
+{
-+ uint n, ret = 0;
++ uint start, end, i;
++ void *txp;
+
-+ if (len < 0)
-+ len = 4096; /* "infinite" */
++ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
+
-+ /* skip 'offset' bytes */
-+ for (; p && offset; p = PKTNEXT(drv, p)) {
-+ if (offset < (uint)PKTLEN(drv, p))
-+ break;
-+ offset -= PKTLEN(drv, p);
-+ }
++ txp = NULL;
+
-+ if (!p)
-+ return 0;
++ start = di->txin;
++ if (forceall)
++ end = di->txout;
++ else
++ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
+
-+ /* copy the data */
-+ for (; p && len; p = PKTNEXT(drv, p)) {
-+ n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len);
-+ bcopy(PKTDATA(drv, p) + offset, buf, n);
-+ buf += n;
-+ len -= n;
-+ ret += n;
-+ offset = 0;
-+ }
++ if ((start == 0) && (end > di->txout))
++ goto bogus;
+
-+ return ret;
-+}
++ for (i = start; i != end && !txp; i = NEXTTXD(i)) {
++ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset),
++ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
++ W_SM(&di->txd[i].addr, 0xdeadbeef);
++ txp = di->txp[i];
++ di->txp[i] = NULL;
++ }
+
-+/* return total length of buffer chain */
-+uint
-+pkttotlen(void *drv, void *p)
-+{
-+ uint total;
++ di->txin = i;
+
-+ total = 0;
-+ for (; p; p = PKTNEXT(drv, p))
-+ total += PKTLEN(drv, p);
-+ return (total);
-+}
++ /* tx flow control */
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+
++ return (txp);
+
-+uchar*
-+bcm_ether_ntoa(char *ea, char *buf)
-+{
-+ sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
-+ (uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
-+ (uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
-+ return (buf);
++bogus:
++/*
++ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
++ start, end, di->txout, forceall));
++*/
++ return (NULL);
+}
+
-+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
-+int
-+bcm_ether_atoe(char *p, char *ea)
++void
++dma_rxreclaim(dma_info_t *di)
+{
-+ int i = 0;
++ void *p;
+
-+ for (;;) {
-+ ea[i++] = (char) bcm_strtoul(p, &p, 16);
-+ if (!*p++ || i == 6)
-+ break;
-+ }
++ DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
+
-+ return (i == 6);
++ while ((p = dma_getnextrxp(di, TRUE)))
++ PKTFREE(di->drv, p, FALSE);
+}
+
-+/*
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
-+ * triples, returning a pointer to the substring whose first element
-+ * matches tag. Stop parsing when we see an element whose ID is greater
-+ * than the target key.
-+ */
-+bcm_tlv_t *
-+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
++void *
++dma_getnextrxp(dma_info_t *di, bool forceall)
+{
-+ bcm_tlv_t *elt;
-+ int totlen;
++ uint i;
++ void *rxp;
+
-+ elt = (bcm_tlv_t*)buf;
-+ totlen = buflen;
++ /* if forcing, dma engine must be disabled */
++ ASSERT(!forceall || !dma_rxenabled(di));
+
-+ /* find tagged parameter */
-+ while (totlen >= 2) {
-+ uint id = elt->id;
-+ int len = elt->len;
-+
-+ /* Punt if we start seeing IDs > than target key */
-+ if (id > key)
-+ return(NULL);
++ i = di->rxin;
+
-+ /* validate remaining totlen */
-+ if ((id == key) && (totlen >= (len + 2)))
-+ return (elt);
++ /* return if no packets posted */
++ if (i == di->rxout)
++ return (NULL);
+
-+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+ totlen -= (len + 2);
-+ }
-+ return NULL;
-+}
++ /* ignore curr if forceall */
++ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK)))
++ return (NULL);
+
++ /* get the packet pointer that corresponds to the rx descriptor */
++ rxp = di->rxp[i];
++ ASSERT(rxp);
++ di->rxp[i] = NULL;
+
-+/*
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
-+ * triples, returning a pointer to the substring whose first element
-+ * matches tag
-+ */
-+bcm_tlv_t *
-+bcm_parse_tlvs(void *buf, int buflen, uint key)
-+{
-+ bcm_tlv_t *elt;
-+ int totlen;
++ /* clear this packet from the descriptor ring */
++ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset),
++ di->rxbufsize, DMA_RX, rxp);
++ W_SM(&di->rxd[i].addr, 0xdeadbeef);
+
-+ elt = (bcm_tlv_t*)buf;
-+ totlen = buflen;
++ di->rxin = NEXTRXD(i);
+
-+ /* find tagged parameter */
-+ while (totlen >= 2) {
-+ int len = elt->len;
++ return (rxp);
++}
+
-+ /* validate remaining totlen */
-+ if ((elt->id == key) && (totlen >= (len + 2)))
-+ return (elt);
-+
-+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+ totlen -= (len + 2);
-+ }
-+
-+ return NULL;
++char*
++dma_dumptx(dma_info_t *di, char *buf)
++{
++ buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n",
++ (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail);
++ buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n",
++ R_REG(&di->regs->xmtcontrol),
++ R_REG(&di->regs->xmtaddr),
++ R_REG(&di->regs->xmtptr),
++ R_REG(&di->regs->xmtstatus));
++ return (buf);
+}
+
-+void
-+pktqinit(struct pktq *q, int maxlen)
++char*
++dma_dumprx(dma_info_t *di, char *buf)
+{
-+ q->head = q->tail = NULL;
-+ q->maxlen = maxlen;
-+ q->len = 0;
++ buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n",
++ (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout);
++ buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n",
++ R_REG(&di->regs->rcvcontrol),
++ R_REG(&di->regs->rcvaddr),
++ R_REG(&di->regs->rcvptr),
++ R_REG(&di->regs->rcvstatus));
++ return (buf);
+}
+
-+void
-+pktenq(struct pktq *q, void *p, bool lifo)
++char*
++dma_dump(dma_info_t *di, char *buf)
+{
-+ ASSERT(PKTLINK(p) == NULL);
-+
-+ PKTSETLINK(p, NULL);
++ buf = dma_dumptx(di, buf);
++ buf = dma_dumprx(di, buf);
++ return (buf);
++}
+
-+ if (q->tail == NULL) {
-+ ASSERT(q->head == NULL);
-+ q->head = q->tail = p;
-+ }
++uint
++dma_getvar(dma_info_t *di, char *name)
++{
++ if (!strcmp(name, "&txavail"))
++ return ((uint) &di->txavail);
+ else {
-+ ASSERT(q->head);
-+ ASSERT(PKTLINK(q->tail) == NULL);
-+ if (lifo) {
-+ PKTSETLINK(p, q->head);
-+ q->head = p;
-+ } else {
-+ PKTSETLINK(q->tail, p);
-+ q->tail = p;
-+ }
++ ASSERT(0);
+ }
-+ q->len++;
++ return (0);
+}
+
-+void*
-+pktdeq(struct pktq *q)
++void
++dma_txblock(dma_info_t *di)
+{
-+ void *p;
-+
-+ if ((p = q->head)) {
-+ ASSERT(q->tail);
-+ q->head = PKTLINK(p);
-+ PKTSETLINK(p, NULL);
-+ q->len--;
-+ if (q->head == NULL)
-+ q->tail = NULL;
-+ }
-+ else {
-+ ASSERT(q->tail == NULL);
-+ }
++ di->txavail = 0;
++}
+
-+ return (p);
++void
++dma_txunblock(dma_info_t *di)
++{
++ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
+}
+
-+/*******************************************************************************
-+ * crc8
-+ *
-+ * Computes a crc8 over the input data using the polynomial:
-+ *
-+ * x^8 + x^7 +x^6 + x^4 + x^2 + 1
-+ *
-+ * The caller provides the initial value (either CRC8_INIT_VALUE
-+ * or the previous returned value) to allow for processing of
-+ * discontiguous blocks of data. When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream. When checking, a final
-+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
++uint
++dma_txactive(dma_info_t *di)
++{
++ return (NTXDACTIVE(di->txin, di->txout));
++}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-08-28 11:12:20.476852160 +0200
+@@ -0,0 +1,420 @@
++/*
++ * Linux OS Independent Layer
+ *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
-+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ ******************************************************************************/
-+
-+static uint8 crc8_table[256] = {
-+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
-+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
-+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
-+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
-+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
-+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
-+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
-+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
-+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
-+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
-+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
-+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
-+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
-+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
-+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
-+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
-+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
-+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
-+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
-+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
-+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
-+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
-+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
-+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
-+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
-+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
-+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
-+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
-+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
-+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
-+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
-+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
-+};
-+
-+/*
-+ * Search the name=value vars for a specific one and return its value.
-+ * Returns NULL if not found.
++ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
+ */
-+char*
-+getvar(char *vars, char *name)
-+{
-+ char *s;
-+ int len;
-+
-+ len = strlen(name);
+
-+ /* first look in vars[] */
-+ for (s = vars; s && *s; ) {
-+ if ((bcmp(s, name, len) == 0) && (s[len] == '='))
-+ return (&s[len+1]);
++#define LINUX_OSL
+
-+ while (*s++)
-+ ;
-+ }
++#include <typedefs.h>
++#include <bcmendian.h>
++#include <linuxver.h>
++#include <linux_osl.h>
++#include <bcmutils.h>
++#include <linux/delay.h>
++#ifdef mips
++#include <asm/paccess.h>
++#endif
++#include <pcicfg.h>
+
-+ /* then query nvram */
-+ return (nvram_get(name));
-+}
++#define PCI_CFG_RETRY 10
+
-+/*
-+ * Search the vars for a specific one and return its value as
-+ * an integer. Returns 0 if not found.
-+ */
-+int
-+getintvar(char *vars, char *name)
++void*
++osl_pktget(void *drv, uint len, bool send)
+{
-+ char *val;
++ struct sk_buff *skb;
+
-+ if ((val = getvar(vars, name)) == NULL)
-+ return (0);
++ if ((skb = dev_alloc_skb(len)) == NULL)
++ return (NULL);
+
-+ return (bcm_strtoul(val, NULL, 0));
++ skb_put(skb, len);
++
++ /* ensure the cookie field is cleared */
++ PKTSETCOOKIE(skb, NULL);
++
++ return ((void*) skb);
+}
+
+void
-+bcm_mdelay(uint ms)
++osl_pktfree(void *p)
+{
-+ uint i;
++ struct sk_buff *skb, *nskb;
+
-+ for (i = 0; i < ms; i++) {
-+ OSL_DELAY(1000);
++ skb = (struct sk_buff*) p;
++
++ /* perversion: we use skb->next to chain multi-skb packets */
++ while (skb) {
++ nskb = skb->next;
++ skb->next = NULL;
++ if (skb->destructor) {
++ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */
++ dev_kfree_skb_any(skb);
++ } else {
++ /* can free immediately (even in_irq()) if destructor does not exist */
++ dev_kfree_skb(skb);
++ }
++ skb = nskb;
+ }
+}
+
-+#define CRC_INNER_LOOP(n, c, x) \
-+ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
-+
-+uint8
-+crc8(
-+ uint8 *pdata, /* pointer to array of data to process */
-+ uint nbytes, /* number of input data bytes to process */
-+ uint8 crc /* either CRC8_INIT_VALUE or previous return value */
-+)
++uint32
++osl_pci_read_config(void *loc, uint offset, uint size)
+{
-+ /* hard code the crc loop instead of using CRC_INNER_LOOP macro
-+ * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
-+ while (nbytes-- > 0)
-+ crc = crc8_table[(crc ^ *pdata++) & 0xff];
-+
-+ return crc;
-+}
++ struct pci_dev *pdev;
++ uint val;
++ uint retry=PCI_CFG_RETRY;
+
-+/*******************************************************************************
-+ * crc16
-+ *
-+ * Computes a crc16 over the input data using the polynomial:
-+ *
-+ * x^16 + x^12 +x^5 + 1
-+ *
-+ * The caller provides the initial value (either CRC16_INIT_VALUE
-+ * or the previous returned value) to allow for processing of
-+ * discontiguous blocks of data. When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream. When checking, a final
-+ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
-+ *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
-+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
-+ *
-+ ******************************************************************************/
++ /* only 4byte access supported */
++ ASSERT(size == 4);
+
-+static uint16 crc16_table[256] = {
-+ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
-+ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
-+ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
-+ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
-+ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
-+ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
-+ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
-+ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
-+ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
-+ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
-+ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
-+ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
-+ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
-+ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
-+ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
-+ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
-+ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
-+ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
-+ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
-+ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
-+ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
-+ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
-+ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
-+ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
-+ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
-+ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
-+ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
-+ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
-+ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
-+ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
-+ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
-+ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
-+};
++ pdev = (struct pci_dev*)loc;
++ do {
++ pci_read_config_dword(pdev, offset, &val);
++ if (val != 0xffffffff)
++ break;
++ } while (retry--);
+
-+uint16
-+crc16(
-+ uint8 *pdata, /* pointer to array of data to process */
-+ uint nbytes, /* number of input data bytes to process */
-+ uint16 crc /* either CRC16_INIT_VALUE or previous return value */
-+)
-+{
-+ while (nbytes-- > 0)
-+ CRC_INNER_LOOP(16, crc, *pdata++);
-+ return crc;
-+}
+
-+static uint32 crc32_table[256] = {
-+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-+};
++ return (val);
++}
+
-+uint32
-+crc32(
-+ uint8 *pdata, /* pointer to array of data to process */
-+ uint nbytes, /* number of input data bytes to process */
-+ uint32 crc /* either CRC32_INIT_VALUE or previous return value */
-+)
++void
++osl_pci_write_config(void *loc, uint offset, uint size, uint val)
+{
-+ uint8 *pend;
-+#ifdef __mips__
-+ uint8 tmp[4];
-+ ulong *tptr = (ulong *)tmp;
++ struct pci_dev *pdev;
++ uint retry=PCI_CFG_RETRY;
+
-+ /* in case the beginning of the buffer isn't aligned */
-+ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
-+ nbytes -= (pend - pdata);
-+ while (pdata < pend)
-+ CRC_INNER_LOOP(32, crc, *pdata++);
++ /* only 4byte access supported */
++ ASSERT(size == 4);
+
-+ /* handle bulk of data as 32-bit words */
-+ pend = pdata + (nbytes & 0xfffffffc);
-+ while (pdata < pend) {
-+ *tptr = *((ulong *)pdata)++;
-+ CRC_INNER_LOOP(32, crc, tmp[0]);
-+ CRC_INNER_LOOP(32, crc, tmp[1]);
-+ CRC_INNER_LOOP(32, crc, tmp[2]);
-+ CRC_INNER_LOOP(32, crc, tmp[3]);
-+ }
++ pdev = (struct pci_dev*)loc;
+
-+ /* 1-3 bytes at end of buffer */
-+ pend = pdata + (nbytes & 0x03);
-+ while (pdata < pend)
-+ CRC_INNER_LOOP(32, crc, *pdata++);
-+#else
-+ pend = pdata + nbytes;
-+ while (pdata < pend)
-+ CRC_INNER_LOOP(32, crc, *pdata++);
-+#endif
-+
-+ return crc;
-+}
++ do {
++ pci_write_config_dword(pdev, offset, val);
++ if (offset!=PCI_BAR0_WIN)
++ break;
++ if (osl_pci_read_config(loc,offset,size) == val)
++ break;
++ } while (retry--);
+
-+#ifdef notdef
-+#define CLEN 1499
-+#define CBUFSIZ (CLEN+4)
-+#define CNBUFS 5
++}
+
-+void testcrc32(void)
++void
++osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size)
+{
-+ uint j,k,l;
-+ uint8 *buf;
-+ uint len[CNBUFS];
-+ uint32 crcr;
-+ uint32 crc32tv[CNBUFS] =
-+ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
-+
-+ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
-+
-+ /* step through all possible alignments */
-+ for (l=0;l<=4;l++) {
-+ for (j=0; j<CNBUFS; j++) {
-+ len[j] = CLEN;
-+ for (k=0; k<len[j]; k++)
-+ *(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
-+ }
-+
-+ for (j=0; j<CNBUFS; j++) {
-+ crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
-+ ASSERT(crcr == crc32tv[j]);
-+ }
-+ }
++ ASSERT(0);
++}
+
-+ MFREE(buf, CBUFSIZ*CNBUFS);
-+ return;
++void
++osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size)
++{
++ ASSERT(0);
+}
-+#endif
+
++void
++osl_assert(char *exp, char *file, int line)
++{
++ char tempbuf[255];
+
++ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line);
++ panic(tempbuf);
++}
+
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c 2005-08-28 11:12:20.430859152 +0200
-@@ -0,0 +1,763 @@
+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA module.
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hnddma.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ * BINOSL selects the slightly slower function-call-based binary compatible osl.
+ */
++#ifdef BINOSL
+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
-+
-+struct dma_info; /* forward declaration */
-+#define di_t struct dma_info
-+#include <hnddma.h>
-+
-+/* debug/trace */
-+#define DMA_ERROR(args)
-+#define DMA_TRACE(args)
-+
-+/* default dma message level(if input msg_level pointer is null in dma_attach()) */
-+static uint dma_msg_level = 0;
-+
-+#define MAXNAMEL 8
-+#define MAXDD (DMAMAXRINGSZ / sizeof (dmadd_t))
-+
-+/* dma engine software state */
-+typedef struct dma_info {
-+ hnddma_t hnddma; /* exported structure */
-+ uint *msg_level; /* message level pointer */
-+
-+ char name[MAXNAMEL]; /* callers name for diag msgs */
-+ void *drv; /* driver handle */
-+ void *dev; /* device handle */
-+ dmaregs_t *regs; /* dma engine registers */
-+
-+ dmadd_t *txd; /* pointer to chip-specific tx descriptor ring */
-+ uint txin; /* index of next descriptor to reclaim */
-+ uint txout; /* index of next descriptor to post */
-+ uint txavail; /* # free tx descriptors */
-+ void *txp[MAXDD]; /* parallel array of pointers to packets */
-+ ulong txdpa; /* physical address of descriptor ring */
-+ uint txdalign; /* #bytes added to alloc'd mem to align txd */
-+
-+ dmadd_t *rxd; /* pointer to chip-specific rx descriptor ring */
-+ uint rxin; /* index of next descriptor to reclaim */
-+ uint rxout; /* index of next descriptor to post */
-+ void *rxp[MAXDD]; /* parallel array of pointers to packets */
-+ ulong rxdpa; /* physical address of descriptor ring */
-+ uint rxdalign; /* #bytes added to alloc'd mem to align rxd */
-+
-+ /* tunables */
-+ uint ntxd; /* # tx descriptors */
-+ uint nrxd; /* # rx descriptors */
-+ uint rxbufsize; /* rx buffer size in bytes */
-+ uint nrxpost; /* # rx buffers to keep posted */
-+ uint rxoffset; /* rxcontrol offset */
-+ uint ddoffset; /* add to get dma address of descriptor ring */
-+ uint dataoffset; /* add to get dma address of data buffer */
-+} dma_info_t;
-+
-+/* descriptor bumping macros */
-+#define NEXTTXD(i) ((i + 1) & (di->ntxd - 1))
-+#define PREVTXD(i) ((i - 1) & (di->ntxd - 1))
-+#define NEXTRXD(i) ((i + 1) & (di->nrxd - 1))
-+#define NTXDACTIVE(h, t) ((t - h) & (di->ntxd - 1))
-+#define NRXDACTIVE(h, t) ((t - h) & (di->nrxd - 1))
-+
-+/* macros to convert between byte offsets and indexes */
-+#define B2I(bytes) ((bytes) / sizeof (dmadd_t))
-+#define I2B(index) ((index) * sizeof (dmadd_t))
-+
-+void*
-+dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
-+ uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
++int
++osl_printf(const char *format, ...)
+{
-+ dma_info_t *di;
-+ void *va;
-+
-+ ASSERT(ntxd <= MAXDD);
-+ ASSERT(nrxd <= MAXDD);
-+
-+ /* allocate private info structure */
-+ if ((di = MALLOC(sizeof (dma_info_t))) == NULL)
-+ return (NULL);
-+ bzero((char*)di, sizeof (dma_info_t));
-+
-+ /* set message level */
-+ di->msg_level = msg_level ? msg_level : &dma_msg_level;
-+
-+ DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset));
-+
-+ /* make a private copy of our callers name */
-+ strncpy(di->name, name, MAXNAMEL);
-+ di->name[MAXNAMEL-1] = '\0';
-+
-+ di->drv = drv;
-+ di->dev = dev;
-+ di->regs = regs;
++ va_list args;
++ char buf[1024];
++ int len;
+
-+ /* allocate transmit descriptor ring */
-+ if (ntxd) {
-+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL)
-+ goto fail;
-+ di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
-+ di->txdalign = ((uint)di->txd - (uint)va);
-+ di->txdpa = di->txdpa + di->txdalign;
-+ ASSERT(ISALIGNED(di->txd, DMARINGALIGN));
-+ }
++ /* sprintf into a local buffer because there *is* no "vprintk()".. */
++ va_start(args, format);
++ len = vsprintf(buf, format, args);
++ va_end(args);
+
-+ /* allocate receive descriptor ring */
-+ if (nrxd) {
-+ if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL)
-+ goto fail;
-+ di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
-+ di->rxdalign = ((uint)di->rxd - (uint)va);
-+ di->rxdpa = di->rxdpa + di->rxdalign;
-+ ASSERT(ISALIGNED(di->rxd, DMARINGALIGN));
++ if (len > sizeof (buf)) {
++ printk("osl_printf: buffer overrun\n");
++ return (0);
+ }
+
-+ /* save tunables */
-+ di->ntxd = ntxd;
-+ di->nrxd = nrxd;
-+ di->rxbufsize = rxbufsize;
-+ di->nrxpost = nrxpost;
-+ di->rxoffset = rxoffset;
-+ di->ddoffset = ddoffset;
-+ di->dataoffset = dataoffset;
-+
-+ return ((void*)di);
-+
-+fail:
-+ dma_detach((void*)di);
-+ return (NULL);
++ return (printk(buf));
+}
+
-+/* may be called with core in reset */
-+void
-+dma_detach(dma_info_t *di)
++int
++osl_sprintf(char *buf, const char *format, ...)
+{
-+ if (di == NULL)
-+ return;
-+
-+ DMA_TRACE(("%s: dma_detach\n", di->name));
-+
-+ /* shouldn't be here if descriptors are unreclaimed */
-+ ASSERT(di->txin == di->txout);
-+ ASSERT(di->rxin == di->rxout);
-+
-+ /* free dma descriptor rings */
-+ if (di->txd)
-+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa);
-+ if (di->rxd)
-+ DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa);
++ va_list args;
++ int rc;
+
-+ /* free our private info structure */
-+ MFREE((void*)di, sizeof (dma_info_t));
++ va_start(args, format);
++ rc = vsprintf(buf, format, args);
++ va_end(args);
++ return (rc);
+}
+
-+
-+void
-+dma_txreset(dma_info_t *di)
++int
++osl_strcmp(const char *s1, const char *s2)
+{
-+ uint32 status;
-+
-+ DMA_TRACE(("%s: dma_txreset\n", di->name));
-+
-+ /* suspend tx DMA first */
-+ W_REG(&di->regs->xmtcontrol, XC_SE);
-+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED &&
-+ status != XS_XS_IDLE &&
-+ status != XS_XS_STOPPED,
-+ 10000);
-+
-+ W_REG(&di->regs->xmtcontrol, 0);
-+ SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED,
-+ 10000);
-+
-+ if (status != XS_XS_DISABLED) {
-+ DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
-+ }
-+
-+ /* wait for the last transaction to complete */
-+ OSL_DELAY(300);
++ return (strcmp(s1, s2));
+}
+
-+void
-+dma_rxreset(dma_info_t *di)
++int
++osl_strncmp(const char *s1, const char *s2, uint n)
+{
-+ uint32 status;
++ return (strncmp(s1, s2, n));
++}
+
-+ DMA_TRACE(("%s: dma_rxreset\n", di->name));
++int
++osl_strlen(char *s)
++{
++ return (strlen(s));
++}
+
-+ W_REG(&di->regs->rcvcontrol, 0);
-+ SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED,
-+ 10000);
++char*
++osl_strcpy(char *d, const char *s)
++{
++ return (strcpy(d, s));
++}
+
-+ if (status != RS_RS_DISABLED) {
-+ DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
-+ }
++char*
++osl_strncpy(char *d, const char *s, uint n)
++{
++ return (strncpy(d, s, n));
+}
+
+void
-+dma_txinit(dma_info_t *di)
++bcopy(const void *src, void *dst, int len)
+{
-+ DMA_TRACE(("%s: dma_txinit\n", di->name));
-+
-+ di->txin = di->txout = 0;
-+ di->txavail = di->ntxd - 1;
-+
-+ /* clear tx descriptor ring */
-+ BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t)));
-+
-+ W_REG(&di->regs->xmtcontrol, XC_XE);
-+ W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset));
++ memcpy(dst, src, len);
+}
+
-+bool
-+dma_txenabled(dma_info_t *di)
++int
++bcmp(const void *b1, const void *b2, int len)
+{
-+ uint32 xc;
-+
-+ /* If the chip is dead, it is not enabled :-) */
-+ xc = R_REG(&di->regs->xmtcontrol);
-+ return ((xc != 0xffffffff) && (xc & XC_XE));
++ return (memcmp(b1, b2, len));
+}
+
+void
-+dma_txsuspend(dma_info_t *di)
++bzero(void *b, int len)
+{
-+ DMA_TRACE(("%s: dma_txsuspend\n", di->name));
-+ OR_REG(&di->regs->xmtcontrol, XC_SE);
++ memset(b, '\0', len);
+}
+
-+void
-+dma_txresume(dma_info_t *di)
++void*
++osl_malloc(uint size)
+{
-+ DMA_TRACE(("%s: dma_txresume\n", di->name));
-+ AND_REG(&di->regs->xmtcontrol, ~XC_SE);
++ return (kmalloc(size, GFP_ATOMIC));
+}
+
-+bool
-+dma_txsuspended(dma_info_t *di)
++void
++osl_mfree(void *addr, uint size)
+{
-+ uint32 xc;
-+ uint32 xs;
++ kfree(addr);
++}
+
-+ xc = R_REG(&di->regs->xmtcontrol);
-+ if (xc & XC_SE) {
-+ xs = R_REG(&di->regs->xmtstatus);
-+ return ((xs & XS_XS_MASK) == XS_XS_IDLE);
-+ }
-+ return 0;
++uint32
++osl_readl(volatile uint32 *r)
++{
++ return (readl(r));
+}
+
-+bool
-+dma_txstopped(dma_info_t *di)
++uint16
++osl_readw(volatile uint16 *r)
+{
-+ return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED);
++ return (readw(r));
+}
+
-+bool
-+dma_rxstopped(dma_info_t *di)
++uint8
++osl_readb(volatile uint8 *r)
+{
-+ return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED);
++ return (readb(r));
+}
+
+void
-+dma_fifoloopbackenable(dma_info_t *di)
++osl_writel(uint32 v, volatile uint32 *r)
+{
-+ DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
-+ OR_REG(&di->regs->xmtcontrol, XC_LE);
++ writel(v, r);
+}
+
+void
-+dma_rxinit(dma_info_t *di)
++osl_writew(uint16 v, volatile uint16 *r)
+{
-+ DMA_TRACE(("%s: dma_rxinit\n", di->name));
-+
-+ di->rxin = di->rxout = 0;
-+
-+ /* clear rx descriptor ring */
-+ BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t)));
-+
-+ dma_rxenable(di);
-+ W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset));
++ writew(v, r);
+}
+
+void
-+dma_rxenable(dma_info_t *di)
++osl_writeb(uint8 v, volatile uint8 *r)
+{
-+ DMA_TRACE(("%s: dma_rxenable\n", di->name));
-+ W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
++ writeb(v, r);
+}
+
-+bool
-+dma_rxenabled(dma_info_t *di)
++void *
++osl_uncached(void *va)
+{
-+ uint32 rc;
-+
-+ rc = R_REG(&di->regs->rcvcontrol);
-+ return ((rc != 0xffffffff) && (rc & RC_RE));
++#ifdef mips
++ return ((void*)KSEG1ADDR(va));
++#else
++ return ((void*)va);
++#endif
+}
+
-+/*
-+ * The BCM47XX family supports full 32bit dma engine buffer addressing so
-+ * dma buffers can cross 4 Kbyte page boundaries.
-+ */
-+int
-+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
++uint
++osl_getcycles(void)
+{
-+ void *p, *next;
-+ uchar *data;
-+ uint len;
-+ uint txout;
-+ uint32 ctrl;
-+ uint32 pa;
++ uint cycles;
+
-+ DMA_TRACE(("%s: dma_txfast\n", di->name));
++#if defined(mips)
++ cycles = read_c0_count() * 2;
++#elif defined(__i386__)
++ rdtscl(cycles);
++#else
++ cycles = 0;
++#endif
++ return cycles;
++}
+
-+ txout = di->txout;
-+ ctrl = 0;
++void *
++osl_reg_map(uint32 pa, uint size)
++{
++ return (ioremap_nocache((unsigned long)pa, (unsigned long)size));
++}
+
-+ /*
-+ * Walk the chain of packet buffers
-+ * allocating and initializing transmit descriptor entries.
-+ */
-+ for (p = p0; p; p = next) {
-+ data = PKTDATA(di->drv, p);
-+ len = PKTLEN(di->drv, p);
-+ next = PKTNEXT(di->drv, p);
++void
++osl_reg_unmap(void *va)
++{
++ iounmap(va);
++}
+
-+ /* return nonzero if out of tx descriptors */
-+ if (NEXTTXD(txout) == di->txin)
-+ goto outoftxd;
++int
++osl_busprobe(uint32 *val, uint32 addr)
++{
++#ifdef mips
++ return get_dbe(*val, (uint32*)addr);
++#else
++ *val = readl(addr);
++ return 0;
++#endif
++}
+
-+ if (len == 0)
-+ continue;
++void*
++osl_dma_alloc_consistent(void *dev, uint size, ulong *pap)
++{
++ return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap));
++}
+
-+ /* get physical address of buffer start */
-+ pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p);
++void
++osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa)
++{
++ pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa);
++}
+
-+ /* build the descriptor control value */
-+ ctrl = len & CTRL_BC_MASK;
++uint
++osl_dma_map(void *dev, void *va, uint size, int direction)
++{
++ int dir;
+
-+ ctrl |= coreflags;
-+
-+ if (p == p0)
-+ ctrl |= CTRL_SOF;
-+ if (next == NULL)
-+ ctrl |= (CTRL_IOC | CTRL_EOF);
-+ if (txout == (di->ntxd - 1))
-+ ctrl |= CTRL_EOT;
++ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
++ return (pci_map_single(dev, va, size, dir));
++}
+
-+ /* init the tx descriptor */
-+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++void
++osl_dma_unmap(void *dev, uint pa, uint size, int direction)
++{
++ int dir;
+
-+ ASSERT(di->txp[txout] == NULL);
++ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
++ pci_unmap_single(dev, (uint32)pa, size, dir);
++}
+
-+ txout = NEXTTXD(txout);
-+ }
++void
++osl_delay(uint usec)
++{
++ udelay(usec);
++}
+
-+ /* if last txd eof not set, fix it */
-+ if (!(ctrl & CTRL_EOF))
-+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
++uchar*
++osl_pktdata(void *drv, void *skb)
++{
++ return (((struct sk_buff*)skb)->data);
++}
+
-+ /* save the packet */
-+ di->txp[PREVTXD(txout)] = p0;
++uint
++osl_pktlen(void *drv, void *skb)
++{
++ return (((struct sk_buff*)skb)->len);
++}
+
-+ /* bump the tx descriptor index */
-+ di->txout = txout;
++void*
++osl_pktnext(void *drv, void *skb)
++{
++ return (((struct sk_buff*)skb)->next);
++}
+
-+ /* kick the chip */
-+ W_REG(&di->regs->xmtptr, I2B(txout));
++void
++osl_pktsetnext(void *skb, void *x)
++{
++ ((struct sk_buff*)skb)->next = (struct sk_buff*)x;
++}
+
-+ /* tx flow control */
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++void
++osl_pktsetlen(void *drv, void *skb, uint len)
++{
++ __skb_trim((struct sk_buff*)skb, len);
++}
+
-+ return (0);
++uchar*
++osl_pktpush(void *drv, void *skb, int bytes)
++{
++ return (skb_push((struct sk_buff*)skb, bytes));
++}
+
-+outoftxd:
-+ DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
-+ PKTFREE(di->drv, p0, TRUE);
-+ di->txavail = 0;
-+ di->hnddma.txnobuf++;
-+ return (-1);
++uchar*
++osl_pktpull(void *drv, void *skb, int bytes)
++{
++ return (skb_pull((struct sk_buff*)skb, bytes));
+}
+
-+#define PAGESZ 4096
-+#define PAGEBASE(x) ((uint)(x) & ~4095)
++void*
++osl_pktdup(void *drv, void *skb)
++{
++ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
++}
+
-+/*
-+ * Just like above except go through the extra effort of splitting
-+ * buffers that cross 4Kbyte boundaries into multiple tx descriptors.
-+ */
-+int
-+dma_tx(dma_info_t *di, void *p0, uint32 coreflags)
++void*
++osl_pktcookie(void *skb)
+{
-+ void *p, *next;
-+ uchar *data;
-+ uint plen, len;
-+ uchar *page, *start, *end;
-+ uint txout;
-+ uint32 ctrl;
-+ uint32 pa;
++ return ((void*)((struct sk_buff*)skb)->csum);
++}
+
-+ DMA_TRACE(("%s: dma_tx\n", di->name));
++void
++osl_pktsetcookie(void *skb, void *x)
++{
++ ((struct sk_buff*)skb)->csum = (uint)x;
++}
+
-+ txout = di->txout;
-+ ctrl = 0;
++void*
++osl_pktlink(void *skb)
++{
++ return (((struct sk_buff*)skb)->prev);
++}
+
-+ /*
-+ * Walk the chain of packet buffers
-+ * splitting those that cross 4 Kbyte boundaries
-+ * allocating and initializing transmit descriptor entries.
-+ */
-+ for (p = p0; p; p = next) {
-+ data = PKTDATA(di->drv, p);
-+ plen = PKTLEN(di->drv, p);
-+ next = PKTNEXT(di->drv, p);
++void
++osl_pktsetlink(void *skb, void *x)
++{
++ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x;
++}
+
-+ if (plen == 0)
-+ continue;
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c 2005-08-28 11:12:20.478851856 +0200
+@@ -0,0 +1,950 @@
++/*
++ * BCM47XX Sonics SiliconBackplane MIPS core routines
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
+
-+ for (page = (uchar*)PAGEBASE(data);
-+ page <= (uchar*)PAGEBASE(data + plen - 1);
-+ page += PAGESZ) {
++#include <typedefs.h>
++#include <osl.h>
++#include <sbutils.h>
++#include <bcmdevs.h>
++#include <bcmnvram.h>
++#include <bcmutils.h>
++#include <hndmips.h>
++#include <sbconfig.h>
++#include <sbextif.h>
++#include <sbchipc.h>
++#include <sbmemc.h>
+
-+ /* return nonzero if out of tx descriptors */
-+ if (NEXTTXD(txout) == di->txin)
-+ goto outoftxd;
++/*
++ * Memory segments (32bit kernel mode addresses)
++ */
++#undef KUSEG
++#undef KSEG0
++#undef KSEG1
++#undef KSEG2
++#undef KSEG3
++#define KUSEG 0x00000000
++#define KSEG0 0x80000000
++#define KSEG1 0xa0000000
++#define KSEG2 0xc0000000
++#define KSEG3 0xe0000000
+
-+ start = (page == (uchar*)PAGEBASE(data))? data: page;
-+ end = (page == (uchar*)PAGEBASE(data + plen))?
-+ (data + plen): (page + PAGESZ);
-+ len = end - start;
++/*
++ * Map an address to a certain kernel segment
++ */
++#undef KSEG0ADDR
++#undef KSEG1ADDR
++#undef KSEG2ADDR
++#undef KSEG3ADDR
++#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0)
++#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1)
++#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2)
++#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3)
+
-+ /* build the descriptor control value */
-+ ctrl = len & CTRL_BC_MASK;
++/*
++ * The following macros are especially useful for __asm__
++ * inline assembler.
++ */
++#ifndef __STR
++#define __STR(x) #x
++#endif
++#ifndef STR
++#define STR(x) __STR(x)
++#endif
+
-+ ctrl |= coreflags;
++/* *********************************************************************
++ * CP0 Registers
++ ********************************************************************* */
+
-+ if ((p == p0) && (start == data))
-+ ctrl |= CTRL_SOF;
-+ if ((next == NULL) && (end == (data + plen)))
-+ ctrl |= (CTRL_IOC | CTRL_EOF);
-+ if (txout == (di->ntxd - 1))
-+ ctrl |= CTRL_EOT;
++#define C0_INX 0 /* CP0: TLB Index */
++#define C0_RAND 1 /* CP0: TLB Random */
++#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
++#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
++#define C0_CTEXT 4 /* CP0: Context */
++#define C0_PGMASK 5 /* CP0: TLB PageMask */
++#define C0_WIRED 6 /* CP0: TLB Wired */
++#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
++#define C0_COUNT 9 /* CP0: Count */
++#define C0_TLBHI 10 /* CP0: TLB EntryHi */
++#define C0_COMPARE 11 /* CP0: Compare */
++#define C0_SR 12 /* CP0: Processor Status */
++#define C0_STATUS C0_SR /* CP0: Processor Status */
++#define C0_CAUSE 13 /* CP0: Exception Cause */
++#define C0_EPC 14 /* CP0: Exception PC */
++#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
++#define C0_CONFIG 16 /* CP0: Config */
++#define C0_LLADDR 17 /* CP0: LLAddr */
++#define C0_WATCHLO 18 /* CP0: WatchpointLo */
++#define C0_WATCHHI 19 /* CP0: WatchpointHi */
++#define C0_XCTEXT 20 /* CP0: XContext */
++#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
++#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
++#define C0_ECC 26 /* CP0: ECC */
++#define C0_CACHEERR 27 /* CP0: CacheErr */
++#define C0_TAGLO 28 /* CP0: TagLo */
++#define C0_TAGHI 29 /* CP0: TagHi */
++#define C0_ERREPC 30 /* CP0: ErrorEPC */
+
-+ /* get physical address of buffer start */
-+ pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p);
++/*
++ * Macros to access the system control coprocessor
++ */
+
-+ /* init the tx descriptor */
-+ W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++#define MFC0(source, sel) \
++({ \
++ int __res; \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
++ "move\t%0,$1\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ :"=r" (__res) \
++ : \
++ :"$1"); \
++ __res; \
++})
+
-+ ASSERT(di->txp[txout] == NULL);
++#define MTC0(source, sel, value) \
++do { \
++ __asm__ __volatile__( \
++ ".set\tnoreorder\n\t" \
++ ".set\tnoat\n\t" \
++ "move\t$1,%z0\n\t" \
++ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
++ ".set\tat\n\t" \
++ ".set\treorder" \
++ : \
++ :"Jr" (value) \
++ :"$1"); \
++} while (0)
+
-+ txout = NEXTTXD(txout);
-+ }
-+ }
++/*
++ * R4x00 interrupt enable / cause bits
++ */
++#undef IE_SW0
++#undef IE_SW1
++#undef IE_IRQ0
++#undef IE_IRQ1
++#undef IE_IRQ2
++#undef IE_IRQ3
++#undef IE_IRQ4
++#undef IE_IRQ5
++#define IE_SW0 (1<< 8)
++#define IE_SW1 (1<< 9)
++#define IE_IRQ0 (1<<10)
++#define IE_IRQ1 (1<<11)
++#define IE_IRQ2 (1<<12)
++#define IE_IRQ3 (1<<13)
++#define IE_IRQ4 (1<<14)
++#define IE_IRQ5 (1<<15)
+
-+ /* if last txd eof not set, fix it */
-+ if (!(ctrl & CTRL_EOF))
-+ W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
++/*
++ * Bitfields in the R4xx0 cp0 status register
++ */
++#define ST0_IE 0x00000001
++#define ST0_EXL 0x00000002
++#define ST0_ERL 0x00000004
++#define ST0_KSU 0x00000018
++# define KSU_USER 0x00000010
++# define KSU_SUPERVISOR 0x00000008
++# define KSU_KERNEL 0x00000000
++#define ST0_UX 0x00000020
++#define ST0_SX 0x00000040
++#define ST0_KX 0x00000080
++#define ST0_DE 0x00010000
++#define ST0_CE 0x00020000
+
-+ /* save the packet */
-+ di->txp[PREVTXD(txout)] = p0;
++/*
++ * Status register bits available in all MIPS CPUs.
++ */
++#define ST0_IM 0x0000ff00
++#define ST0_CH 0x00040000
++#define ST0_SR 0x00100000
++#define ST0_TS 0x00200000
++#define ST0_BEV 0x00400000
++#define ST0_RE 0x02000000
++#define ST0_FR 0x04000000
++#define ST0_CU 0xf0000000
++#define ST0_CU0 0x10000000
++#define ST0_CU1 0x20000000
++#define ST0_CU2 0x40000000
++#define ST0_CU3 0x80000000
++#define ST0_XX 0x80000000 /* MIPS IV naming */
+
-+ /* bump the tx descriptor index */
-+ di->txout = txout;
++/*
++ * Cache Operations
++ */
+
-+ /* kick the chip */
-+ W_REG(&di->regs->xmtptr, I2B(txout));
++#ifndef Fill_I
++#define Fill_I 0x14
++#endif
+
-+ /* tx flow control */
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++#define cache_unroll(base,op) \
++ __asm__ __volatile__(" \
++ .set noreorder; \
++ .set mips3; \
++ cache %1, (%0); \
++ .set mips0; \
++ .set reorder" \
++ : \
++ : "r" (base), \
++ "i" (op));
+
-+ return (0);
++/*
++ * These are the UART port assignments, expressed as offsets from the base
++ * register. These assignments should hold for any serial port based on
++ * a 8250, 16450, or 16550(A).
++ */
+
-+outoftxd:
-+ DMA_ERROR(("%s: dma_tx: out of txds\n", di->name));
-+ PKTFREE(di->drv, p0, TRUE);
-+ di->txavail = 0;
-+ di->hnddma.txnobuf++;
-+ return (-1);
-+}
++#define UART_MCR 4 /* Out: Modem Control Register */
++#define UART_MSR 6 /* In: Modem Status Register */
++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+
-+/* returns a pointer to the next frame received, or NULL if there are no more */
-+void*
-+dma_rx(dma_info_t *di)
++/*
++ * Returns TRUE if an external UART exists at the given base
++ * register.
++ */
++static bool
++serial_exists(uint8 *regs)
+{
-+ void *p;
-+ uint len;
-+ int skiplen = 0;
-+
-+ while ((p = dma_getnextrxp(di, FALSE))) {
-+ /* skip giant packets which span multiple rx descriptors */
-+ if (skiplen > 0) {
-+ skiplen -= di->rxbufsize;
-+ if (skiplen < 0)
-+ skiplen = 0;
-+ PKTFREE(di->drv, p, FALSE);
-+ continue;
-+ }
-+
-+ len = ltoh16(*(uint16*)(PKTDATA(di->drv, p)));
-+ DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
-+
-+ /* bad frame length check */
-+ if (len > (di->rxbufsize - di->rxoffset)) {
-+ DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
-+ if (len > 0)
-+ skiplen = len - (di->rxbufsize - di->rxoffset);
-+ PKTFREE(di->drv, p, FALSE);
-+ di->hnddma.rxgiants++;
-+ continue;
-+ }
-+
-+ /* set actual length */
-+ PKTSETLEN(di->drv, p, (di->rxoffset + len));
++ uint8 save_mcr, status1;
+
-+ break;
-+ }
++ save_mcr = R_REG(®s[UART_MCR]);
++ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a);
++ status1 = R_REG(®s[UART_MSR]) & 0xf0;
++ W_REG(®s[UART_MCR], save_mcr);
+
-+ return (p);
++ return (status1 == 0x90);
+}
+
-+/* post receive buffers */
++/*
++ * Initializes UART access. The callback function will be called once
++ * per found UART.
++*/
+void
-+dma_rxfill(dma_info_t *di)
++sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
+{
-+ void *p;
-+ uint rxin, rxout;
-+ uint ctrl;
-+ uint n;
-+ uint i;
-+ uint32 pa;
-+ uint rxbufsize;
++ void *regs;
++ ulong base;
++ uint irq;
++ int i, n;
+
-+ /*
-+ * Determine how many receive buffers we're lacking
-+ * from the full complement, allocate, initialize,
-+ * and post them, then update the chip rx lastdscr.
-+ */
++ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
++ extifregs_t *eir = (extifregs_t *) regs;
++ sbconfig_t *sb;
+
-+ rxin = di->rxin;
-+ rxout = di->rxout;
-+ rxbufsize = di->rxbufsize;
++ /* Determine external UART register base */
++ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
++ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
+
-+ n = di->nrxpost - NRXDACTIVE(rxin, rxout);
++ /* Determine IRQ */
++ irq = sb_irq(sbh);
+
-+ DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
++ /* Disable GPIO interrupt initially */
++ W_REG(&eir->gpiointpolarity, 0);
++ W_REG(&eir->gpiointmask, 0);
+
-+ for (i = 0; i < n; i++) {
-+ if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) {
-+ DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
-+ di->hnddma.rxnobuf++;
-+ break;
++ /* Search for external UARTs */
++ n = 2;
++ for (i = 0; i < 2; i++) {
++ regs = (void *) REG_MAP(base + (i * 8), 8);
++ if (serial_exists(regs)) {
++ /* Set GPIO 1 to be the external UART IRQ */
++ W_REG(&eir->gpiointmask, 2);
++ if (add)
++ add(regs, irq, 13500000, 0);
++ }
+ }
+
-+ *(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0;
-+
-+ pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p);
-+ ASSERT(ISALIGNED(pa, 4));
++ /* Add internal UART if enabled */
++ if (R_REG(&eir->corecontrol) & CC_UE)
++ if (add)
++ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
++ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
++ chipcregs_t *cc = (chipcregs_t *) regs;
++ uint32 rev, cap, pll, baud_base, div;
+
-+ /* save the free packet pointer */
-+ ASSERT(di->rxp[rxout] == NULL);
-+ di->rxp[rxout] = p;
++ /* Determine core revision and capabilities */
++ rev = sb_corerev(sbh);
++ cap = R_REG(&cc->capabilities);
++ pll = cap & CAP_PLL_MASK;
+
-+ /* prep the descriptor control value */
-+ ctrl = rxbufsize;
-+ if (rxout == (di->nrxd - 1))
-+ ctrl |= CTRL_EOT;
++ /* Determine IRQ */
++ irq = sb_irq(sbh);
+
-+ /* init the rx descriptor */
-+ W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl));
-+ W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset));
++ if (pll == PLL_TYPE1) {
++ /* PLL clock */
++ baud_base = sb_clock_rate(pll,
++ R_REG(&cc->clockcontrol_n),
++ R_REG(&cc->clockcontrol_m2));
++ div = 1;
++ } else if (rev >= 3) {
++ /* Internal backplane clock */
++ baud_base = sb_clock_rate(pll,
++ R_REG(&cc->clockcontrol_n),
++ R_REG(&cc->clockcontrol_sb));
++ div = 2; /* Minimum divisor */
++ W_REG(&cc->uart_clkdiv, div);
++ } else {
++ /* Fixed internal backplane clock */
++ baud_base = 88000000;
++ div = 48;
++ }
+
-+ rxout = NEXTRXD(rxout);
-+ }
++ /* Clock source depends on strapping if UartClkOverride is unset */
++ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
++ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
++ /* Internal divided backplane clock */
++ baud_base /= div;
++ } else {
++ /* Assume external clock of 1.8432 MHz */
++ baud_base = 1843200;
++ }
++ }
+
-+ di->rxout = rxout;
++ /* Add internal UARTs */
++ n = cap & CAP_UARTS_MASK;
++ for (i = 0; i < n; i++) {
++ /* Register offset changed after revision 0 */
++ if (rev)
++ regs = (void *)((ulong) &cc->uart0data + (i * 256));
++ else
++ regs = (void *)((ulong) &cc->uart0data + (i * 8));
+
-+ /* update the chip lastdscr pointer */
-+ W_REG(&di->regs->rcvptr, I2B(rxout));
++ if (add)
++ add(regs, irq, baud_base, 0);
++ }
++ }
+}
+
-+void
-+dma_txreclaim(dma_info_t *di, bool forceall)
++/* Returns the SB interrupt flag of the current core. */
++uint32
++sb_flag(void *sbh)
+{
-+ void *p;
++ void *regs;
++ sbconfig_t *sb;
+
-+ DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
++ regs = sb_coreregs(sbh);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+ while ((p = dma_getnexttxp(di, forceall)))
-+ PKTFREE(di->drv, p, TRUE);
++ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
+}
+
-+/*
-+ * Reclaim next completed txd (txds if using chained buffers) and
-+ * return associated packet.
-+ * If 'force' is true, reclaim txd(s) and return associated packet
-+ * regardless of the value of the hardware "curr" pointer.
++static const uint32 sbips_int_mask[] = {
++ 0,
++ SBIPS_INT1_MASK,
++ SBIPS_INT2_MASK,
++ SBIPS_INT3_MASK,
++ SBIPS_INT4_MASK
++};
++
++static const uint32 sbips_int_shift[] = {
++ 0,
++ 0,
++ SBIPS_INT2_SHIFT,
++ SBIPS_INT3_SHIFT,
++ SBIPS_INT4_SHIFT
++};
++
++/*
++ * Returns the MIPS IRQ assignment of the current core. If unassigned,
++ * 0 is returned.
+ */
-+void*
-+dma_getnexttxp(dma_info_t *di, bool forceall)
++uint
++sb_irq(void *sbh)
+{
-+ uint start, end, i;
-+ void *txp;
++ uint idx;
++ void *regs;
++ sbconfig_t *sb;
++ uint32 flag, sbipsflag;
++ uint irq = 0;
+
-+ DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
++ flag = sb_flag(sbh);
+
-+ txp = NULL;
++ idx = sb_coreidx(sbh);
+
-+ start = di->txin;
-+ if (forceall)
-+ end = di->txout;
-+ else
-+ end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+ if ((start == 0) && (end > di->txout))
-+ goto bogus;
++ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */
++ sbipsflag = R_REG(&sb->sbipsflag);
++ for (irq = 1; irq <= 4; irq++) {
++ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
++ break;
++ }
++ if (irq == 5)
++ irq = 0;
++ }
+
-+ for (i = start; i != end && !txp; i = NEXTTXD(i)) {
-+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset),
-+ (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
-+ W_SM(&di->txd[i].addr, 0xdeadbeef);
-+ txp = di->txp[i];
-+ di->txp[i] = NULL;
-+ }
-+
-+ di->txin = i;
-+
-+ /* tx flow control */
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
-+
-+ return (txp);
++ sb_setcoreidx(sbh, idx);
+
-+bogus:
-+/*
-+ DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
-+ start, end, di->txout, forceall));
-+*/
-+ return (NULL);
++ return irq;
+}
+
-+void
-+dma_rxreclaim(dma_info_t *di)
++/* Clears the specified MIPS IRQ. */
++static void
++sb_clearirq(void *sbh, uint irq)
+{
-+ void *p;
++ void *regs;
++ sbconfig_t *sb;
+
-+ DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(regs);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+ while ((p = dma_getnextrxp(di, TRUE)))
-+ PKTFREE(di->drv, p, FALSE);
++ if (irq == 0)
++ W_REG(&sb->sbintvec, 0);
++ else
++ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
+}
+
-+void *
-+dma_getnextrxp(dma_info_t *di, bool forceall)
++/*
++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
++ * IRQ 0 may be assigned more than once.
++ */
++static void
++sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit)
+{
-+ uint i;
-+ void *rxp;
++ void *regs;
++ sbconfig_t *sb;
++ uint32 flag;
+
-+ /* if forcing, dma engine must be disabled */
-+ ASSERT(!forceall || !dma_rxenabled(di));
++ regs = sb_setcore(sbh, coreid, coreunit);
++ ASSERT(regs);
++ flag = sb_flag(sbh);
+
-+ i = di->rxin;
++ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(regs);
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+ /* return if no packets posted */
-+ if (i == di->rxout)
-+ return (NULL);
++ if (irq == 0)
++ OR_REG(&sb->sbintvec, 1 << flag);
++ else {
++ flag <<= sbips_int_shift[irq];
++ ASSERT(!(flag & ~sbips_int_mask[irq]));
++ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
++ W_REG(&sb->sbipsflag, flag);
++ }
++}
+
-+ /* ignore curr if forceall */
-+ if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK)))
-+ return (NULL);
++/*
++ * Initializes clocks and interrupts. SB and NVRAM access must be
++ * initialized prior to calling.
++ */
++void
++sb_mips_init(void *sbh)
++{
++ ulong hz, ns, tmp;
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ char *value;
++ uint irq;
+
-+ /* get the packet pointer that corresponds to the rx descriptor */
-+ rxp = di->rxp[i];
-+ ASSERT(rxp);
-+ di->rxp[i] = NULL;
++ /* Figure out current SB clock speed */
++ if ((hz = sb_clock(sbh)) == 0)
++ hz = 100000000;
++ ns = 1000000000 / hz;
+
-+ /* clear this packet from the descriptor ring */
-+ DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset),
-+ di->rxbufsize, DMA_RX, rxp);
-+ W_SM(&di->rxd[i].addr, 0xdeadbeef);
++ /* Setup external interface timing */
++ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
++ /* Initialize extif so we can get to the LEDs and external UART */
++ W_REG(&eir->prog_config, CF_EN);
+
-+ di->rxin = NEXTRXD(i);
++ /* Set timing for the flash */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
+
-+ return (rxp);
-+}
++ /* Set programmable interface timing for external uart */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
++ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
++ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
++ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
++ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
++ /* Set timing for the flash */
++ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
++ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */
++ tmp |= CEIL(120, ns); /* W0 = 120nS */
++ W_REG(&cc->parallelflashwaitcnt, tmp);
+
-+char*
-+dma_dumptx(dma_info_t *di, char *buf)
-+{
-+ buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n",
-+ (ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail);
-+ buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n",
-+ R_REG(&di->regs->xmtcontrol),
-+ R_REG(&di->regs->xmtaddr),
-+ R_REG(&di->regs->xmtptr),
-+ R_REG(&di->regs->xmtstatus));
-+ return (buf);
-+}
++ W_REG(&cc->cs01memwaitcnt, tmp);
++ }
+
-+char*
-+dma_dumprx(dma_info_t *di, char *buf)
-+{
-+ buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n",
-+ (ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout);
-+ buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n",
-+ R_REG(&di->regs->rcvcontrol),
-+ R_REG(&di->regs->rcvaddr),
-+ R_REG(&di->regs->rcvptr),
-+ R_REG(&di->regs->rcvstatus));
-+ return (buf);
++ /* Chip specific initialization */
++ switch (sb_chip(sbh)) {
++ case BCM4710_DEVICE_ID:
++ /* Clear interrupt map */
++ for (irq = 0; irq <= 4; irq++)
++ sb_clearirq(sbh, irq);
++ sb_setirq(sbh, 0, SB_CODEC, 0);
++ sb_setirq(sbh, 0, SB_EXTIF, 0);
++ sb_setirq(sbh, 2, SB_ENET, 1);
++ sb_setirq(sbh, 3, SB_ILINE20, 0);
++ sb_setirq(sbh, 4, SB_PCI, 0);
++ ASSERT(eir);
++ value = nvram_get("et0phyaddr");
++ if (value && !strcmp(value, "31")) {
++ /* Enable internal UART */
++ W_REG(&eir->corecontrol, CC_UE);
++ /* Give USB its own interrupt */
++ sb_setirq(sbh, 1, SB_USB, 0);
++ } else {
++ /* Disable internal UART */
++ W_REG(&eir->corecontrol, 0);
++ /* Give Ethernet its own interrupt */
++ sb_setirq(sbh, 1, SB_ENET, 0);
++ sb_setirq(sbh, 0, SB_USB, 0);
++ }
++ break;
++ case BCM4310_DEVICE_ID:
++ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22));
++ break;
++ }
+}
+
-+char*
-+dma_dump(dma_info_t *di, char *buf)
++uint32
++sb_mips_clock(void *sbh)
+{
-+ buf = dma_dumptx(di, buf);
-+ buf = dma_dumprx(di, buf);
-+ return (buf);
-+}
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ uint32 n, m;
++ uint idx;
++ uint32 pll_type, rate = 0;
+
-+uint
-+dma_getvar(dma_info_t *di, char *name)
-+{
-+ if (!strcmp(name, "&txavail"))
-+ return ((uint) &di->txavail);
-+ else {
-+ ASSERT(0);
-+ }
-+ return (0);
-+}
++ /* get index of the current core */
++ idx = sb_coreidx(sbh);
++ pll_type = PLL_TYPE1;
+
-+void
-+dma_txblock(dma_info_t *di)
-+{
-+ di->txavail = 0;
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ n = R_REG(&eir->clockcontrol_n);
++ m = R_REG(&eir->clockcontrol_sb);
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++ n = R_REG(&cc->clockcontrol_n);
++ if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4))
++ m = R_REG(&cc->clockcontrol_mips);
++ else if (pll_type == PLL_TYPE3) {
++ rate = 200000000;
++ goto out;
++ } else
++ m = R_REG(&cc->clockcontrol_sb);
++ } else
++ goto out;
++
++ /* calculate rate */
++ rate = sb_clock_rate(pll_type, n, m);
++
++out:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ return rate;
+}
+
-+void
-+dma_txunblock(dma_info_t *di)
++static void
++icache_probe(int *size, int *lsize)
+{
-+ di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++ uint32 config1;
++ uint sets, ways;
++
++ config1 = MFC0(C0_CONFIG, 1);
++
++ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
++ if ((*lsize = ((config1 >> 19) & 7)))
++ *lsize = 2 << *lsize;
++ sets = 64 << ((config1 >> 22) & 7);
++ ways = 1 + ((config1 >> 16) & 7);
++ *size = *lsize * sets * ways;
+}
+
-+uint
-+dma_txactive(dma_info_t *di)
++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
++
++static void
++handler(void)
+{
-+ return (NTXDACTIVE(di->txin, di->txout));
++ /* Step 11 */
++ __asm__ (
++ ".set\tmips32\n\t"
++ "ssnop\n\t"
++ "ssnop\n\t"
++ /* Disable interrupts */
++ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
++ "mfc0 $15, $12\n\t"
++ "and $15, $15, -31746\n\t"
++ "mtc0 $15, $12\n\t"
++ "eret\n\t"
++ "nop\n\t"
++ "nop\n\t"
++ ".set\tmips0"
++ );
+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c 2005-08-28 11:12:20.476852160 +0200
-@@ -0,0 +1,420 @@
-+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
-+ */
+
-+#define LINUX_OSL
-+
-+#include <typedefs.h>
-+#include <bcmendian.h>
-+#include <linuxver.h>
-+#include <linux_osl.h>
-+#include <bcmutils.h>
-+#include <linux/delay.h>
-+#ifdef mips
-+#include <asm/paccess.h>
-+#endif
-+#include <pcicfg.h>
-+
-+#define PCI_CFG_RETRY 10
++/* The following MUST come right after handler() */
++static void
++afterhandler(void)
++{
++}
+
-+void*
-+osl_pktget(void *drv, uint len, bool send)
++/*
++ * Set the MIPS, backplane and PCI clocks as closely as possible.
++ */
++bool
++sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
+{
-+ struct sk_buff *skb;
++ extifregs_t *eir = NULL;
++ chipcregs_t *cc = NULL;
++ mipsregs_t *mipsr = NULL;
++ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci;
++ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio;
++ uint32 pll_type, sync_mode;
++ uint idx, i;
++ struct {
++ uint32 mipsclock;
++ uint16 n;
++ uint32 sb;
++ uint32 pci33;
++ uint32 pci25;
++ } type1_table[] = {
++ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */
++ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
++ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
++ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
++ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
++ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
++ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
++ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
++ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
++ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
++ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
++ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
++ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
++ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
++ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
++ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
++ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
++ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
++ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
++ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
++ };
++ typedef struct {
++ uint32 mipsclock;
++ uint32 sbclock;
++ uint16 n;
++ uint32 sb;
++ uint32 pci33;
++ uint32 m2;
++ uint32 m3;
++ uint32 ratio;
++ uint32 ratio_parm;
++ } n4m_table_t;
+
-+ if ((skb = dev_alloc_skb(len)) == NULL)
-+ return (NULL);
++ n4m_table_t type2_table[] = {
++ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
++ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }
++ };
+
-+ skb_put(skb, len);
++ n4m_table_t type4_table[] = {
++ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
++ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
++ { 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
++ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 },
++ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
++ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 },
++ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
++ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
++ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 }
++ };
++ uint icache_size, ic_lsize;
++ ulong start, end, dst;
++ bool ret = FALSE;
+
-+ /* ensure the cookie field is cleared */
-+ PKTSETCOOKIE(skb, NULL);
++ /* get index of the current core */
++ idx = sb_coreidx(sbh);
+
-+ return ((void*) skb);
-+}
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ pll_type = PLL_TYPE1;
++ clockcontrol_n = &eir->clockcontrol_n;
++ clockcontrol_sb = &eir->clockcontrol_sb;
++ clockcontrol_pci = &eir->clockcontrol_pci;
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++ clockcontrol_n = &cc->clockcontrol_n;
++ clockcontrol_sb = &cc->clockcontrol_sb;
++ clockcontrol_pci = &cc->clockcontrol_pci;
++ } else
++ goto done;
+
-+void
-+osl_pktfree(void *p)
-+{
-+ struct sk_buff *skb, *nskb;
++ /* Store the current clock register values */
++ orig_n = R_REG(clockcontrol_n);
++ orig_sb = R_REG(clockcontrol_sb);
++ orig_pci = R_REG(clockcontrol_pci);
+
-+ skb = (struct sk_buff*) p;
++ if (pll_type == PLL_TYPE1) {
++ /* Keep the current PCI clock if not specified */
++ if (pciclock == 0) {
++ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
++ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
++ }
+
-+ /* perversion: we use skb->next to chain multi-skb packets */
-+ while (skb) {
-+ nskb = skb->next;
-+ skb->next = NULL;
-+ if (skb->destructor) {
-+ /* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */
-+ dev_kfree_skb_any(skb);
++ /* Search for the closest MIPS clock less than or equal to a preferred value */
++ for (i = 0; i < ARRAYSIZE(type1_table); i++) {
++ ASSERT(type1_table[i].mipsclock ==
++ sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb));
++ if (type1_table[i].mipsclock > mipsclock)
++ break;
++ }
++ if (i == 0) {
++ ret = FALSE;
++ goto done;
+ } else {
-+ /* can free immediately (even in_irq()) if destructor does not exist */
-+ dev_kfree_skb(skb);
++ ret = TRUE;
++ i--;
+ }
-+ skb = nskb;
-+ }
-+}
-+
-+uint32
-+osl_pci_read_config(void *loc, uint offset, uint size)
-+{
-+ struct pci_dev *pdev;
-+ uint val;
-+ uint retry=PCI_CFG_RETRY;
-+
-+ /* only 4byte access supported */
-+ ASSERT(size == 4);
-+
-+ pdev = (struct pci_dev*)loc;
-+ do {
-+ pci_read_config_dword(pdev, offset, &val);
-+ if (val != 0xffffffff)
-+ break;
-+ } while (retry--);
++ ASSERT(type1_table[i].mipsclock <= mipsclock);
+
++ /* No PLL change */
++ if ((orig_n == type1_table[i].n) &&
++ (orig_sb == type1_table[i].sb) &&
++ (orig_pci == type1_table[i].pci33))
++ goto done;
+
-+ return (val);
-+}
++ /* Set the PLL controls */
++ W_REG(clockcontrol_n, type1_table[i].n);
++ W_REG(clockcontrol_sb, type1_table[i].sb);
++ if (pciclock == 25000000)
++ W_REG(clockcontrol_pci, type1_table[i].pci25);
++ else
++ W_REG(clockcontrol_pci, type1_table[i].pci33);
+
-+void
-+osl_pci_write_config(void *loc, uint offset, uint size, uint val)
-+{
-+ struct pci_dev *pdev;
-+ uint retry=PCI_CFG_RETRY;
++ /* Reset */
++ sb_watchdog(sbh, 1);
++ while (1);
++ } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) {
++ n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table;
++ uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table);
+
-+ /* only 4byte access supported */
-+ ASSERT(size == 4);
++ ASSERT(cc);
+
-+ pdev = (struct pci_dev*)loc;
++ /* Store the current clock register values */
++ orig_m2 = R_REG(&cc->clockcontrol_m2);
++ orig_mips = R_REG(&cc->clockcontrol_mips);
++ orig_ratio_parm = 0;
+
-+ do {
-+ pci_write_config_dword(pdev, offset, val);
-+ if (offset!=PCI_BAR0_WIN)
-+ break;
-+ if (osl_pci_read_config(loc,offset,size) == val)
-+ break;
-+ } while (retry--);
++ /* Look up current ratio */
++ for (i = 0; i < tabsz; i++) {
++ if ((orig_n == table[i].n) &&
++ (orig_sb == table[i].sb) &&
++ (orig_pci == table[i].pci33) &&
++ (orig_m2 == table[i].m2) &&
++ (orig_mips == table[i].m3)) {
++ orig_ratio_parm = table[i].ratio_parm;
++ break;
++ }
++ }
+
-+}
++ /* Search for the closest MIPS clock greater or equal to a preferred value */
++ for (i = 0; i < tabsz; i++) {
++ ASSERT(table[i].mipsclock ==
++ sb_clock_rate(pll_type, table[i].n, table[i].m3));
++ if ((mipsclock <= table[i].mipsclock) &&
++ ((sbclock == 0) || (sbclock <= table[i].sbclock)))
++ break;
++ }
++ if (i == tabsz) {
++ ret = FALSE;
++ goto done;
++ } else {
++ ret = TRUE;
++ }
+
-+void
-+osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size)
-+{
-+ ASSERT(0);
-+}
++ /* No PLL change */
++ if ((orig_n == table[i].n) &&
++ (orig_sb == table[i].sb) &&
++ (orig_pci == table[i].pci33) &&
++ (orig_m2 == table[i].m2) &&
++ (orig_mips == table[i].m3))
++ goto done;
+
-+void
-+osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size)
-+{
-+ ASSERT(0);
-+}
++ /* Set the PLL controls */
++ W_REG(clockcontrol_n, table[i].n);
++ W_REG(clockcontrol_sb, table[i].sb);
++ W_REG(clockcontrol_pci, table[i].pci33);
++ W_REG(&cc->clockcontrol_m2, table[i].m2);
++ W_REG(&cc->clockcontrol_mips, table[i].m3);
+
-+void
-+osl_assert(char *exp, char *file, int line)
-+{
-+ char tempbuf[255];
++ /* No ratio change */
++ if (orig_ratio_parm == table[i].ratio_parm)
++ goto end_fill;
+
-+ sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line);
-+ panic(tempbuf);
-+}
++ new_ratio = table[i].ratio_parm;
+
-+/*
-+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
-+ */
-+#ifdef BINOSL
++ icache_probe(&icache_size, &ic_lsize);
+
-+int
-+osl_printf(const char *format, ...)
-+{
-+ va_list args;
-+ char buf[1024];
-+ int len;
++ /* Preload the code into the cache */
++ start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
++ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
++ while (start < end) {
++ cache_unroll(start, Fill_I);
++ start += ic_lsize;
++ }
+
-+ /* sprintf into a local buffer because there *is* no "vprintk()".. */
-+ va_start(args, format);
-+ len = vsprintf(buf, format, args);
-+ va_end(args);
++ /* Copy the handler */
++ start = (ulong) &handler;
++ end = (ulong) &afterhandler;
++ dst = KSEG1ADDR(0x180);
++ for (i = 0; i < (end - start); i += 4)
++ *((ulong *)(dst + i)) = *((ulong *)(start + i));
++
++ /* Preload handler into the cache one line at a time */
++ for (i = 0; i < (end - start); i += 4)
++ cache_unroll(dst + i, Fill_I);
+
-+ if (len > sizeof (buf)) {
-+ printk("osl_printf: buffer overrun\n");
-+ return (0);
-+ }
++ /* Clear BEV bit */
++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
+
-+ return (printk(buf));
-+}
++ /* Enable interrupts */
++ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
+
-+int
-+osl_sprintf(char *buf, const char *format, ...)
-+{
-+ va_list args;
-+ int rc;
++ /* Enable MIPS timer interrupt */
++ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
++ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
++ ASSERT(mipsr);
++ W_REG(&mipsr->intmask, 1);
+
-+ va_start(args, format);
-+ rc = vsprintf(buf, format, args);
-+ va_end(args);
-+ return (rc);
-+}
++ start_fill:
++ /* step 1, set clock ratios */
++ MTC0(C0_BROADCOM, 3, new_ratio);
++ MTC0(C0_BROADCOM, 1, 8);
+
-+int
-+osl_strcmp(const char *s1, const char *s2)
-+{
-+ return (strcmp(s1, s2));
-+}
++ /* step 2: program timer intr */
++ W_REG(&mipsr->timer, 100);
++ (void) R_REG(&mipsr->timer);
+
-+int
-+osl_strncmp(const char *s1, const char *s2, uint n)
-+{
-+ return (strncmp(s1, s2, n));
-+}
++ /* step 3, switch to async */
++ sync_mode = MFC0(C0_BROADCOM, 4);
++ MTC0(C0_BROADCOM, 4, 1 << 22);
+
-+int
-+osl_strlen(char *s)
-+{
-+ return (strlen(s));
-+}
++ /* step 4, set cfg active */
++ MTC0(C0_BROADCOM, 2, 0x9);
+
-+char*
-+osl_strcpy(char *d, const char *s)
-+{
-+ return (strcpy(d, s));
-+}
+
-+char*
-+osl_strncpy(char *d, const char *s, uint n)
-+{
-+ return (strncpy(d, s, n));
-+}
++ /* steps 5 & 6 */
++ __asm__ __volatile__ (
++ ".set\tmips3\n\t"
++ "wait\n\t"
++ ".set\tmips0"
++ );
+
-+void
-+bcopy(const void *src, void *dst, int len)
-+{
-+ memcpy(dst, src, len);
-+}
++ /* step 7, clear cfg_active */
++ MTC0(C0_BROADCOM, 2, 0);
++
++ /* Additional Step: set back to orig sync mode */
++ MTC0(C0_BROADCOM, 4, sync_mode);
+
-+int
-+bcmp(const void *b1, const void *b2, int len)
-+{
-+ return (memcmp(b1, b2, len));
-+}
++ /* step 8, fake soft reset */
++ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
+
-+void
-+bzero(void *b, int len)
-+{
-+ memset(b, '\0', len);
-+}
++ end_fill:
++ /* step 9 set watchdog timer */
++ sb_watchdog(sbh, 20);
++ (void) R_REG(&cc->chipid);
+
-+void*
-+osl_malloc(uint size)
-+{
-+ return (kmalloc(size, GFP_ATOMIC));
-+}
++ /* step 11 */
++ __asm__ __volatile__ (
++ ".set\tmips3\n\t"
++ "sync\n\t"
++ "wait\n\t"
++ ".set\tmips0"
++ );
++ while (1);
++ }
+
-+void
-+osl_mfree(void *addr, uint size)
-+{
-+ kfree(addr);
-+}
++done:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
+
-+uint32
-+osl_readl(volatile uint32 *r)
-+{
-+ return (readl(r));
++ return ret;
+}
+
-+uint16
-+osl_readw(volatile uint16 *r)
-+{
-+ return (readw(r));
-+}
+
-+uint8
-+osl_readb(volatile uint8 *r)
++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
++uint32
++sb_memc_get_ncdl(void *sbh)
+{
-+ return (readb(r));
-+}
++ sbmemcregs_t *memc;
++ uint32 ret = 0;
++ uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
++ uint idx, rev;
+
-+void
-+osl_writel(uint32 v, volatile uint32 *r)
-+{
-+ writel(v, r);
-+}
++ idx = sb_coreidx(sbh);
+
-+void
-+osl_writew(uint16 v, volatile uint16 *r)
-+{
-+ writew(v, r);
-+}
++ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
++ if (memc == 0)
++ goto out;
+
-+void
-+osl_writeb(uint8 v, volatile uint8 *r)
-+{
-+ writeb(v, r);
-+}
++ rev = sb_corerev(sbh);
+
-+void *
-+osl_uncached(void *va)
-+{
-+#ifdef mips
-+ return ((void*)KSEG1ADDR(va));
-+#else
-+ return ((void*)va);
-+#endif
-+}
++ config = R_REG(&memc->config);
++ wr = R_REG(&memc->wrncdlcor);
++ rd = R_REG(&memc->rdncdlcor);
++ misc = R_REG(&memc->miscdlyctl);
++ dqsg = R_REG(&memc->dqsgatencdl);
+
-+uint
-+osl_getcycles(void)
-+{
-+ uint cycles;
++ rd &= MEMC_RDNCDLCOR_RD_MASK;
++ wr &= MEMC_WRNCDLCOR_WR_MASK;
++ dqsg &= MEMC_DQSGATENCDL_G_MASK;
+
-+#if defined(mips)
-+ cycles = read_c0_count() * 2;
-+#elif defined(__i386__)
-+ rdtscl(cycles);
-+#else
-+ cycles = 0;
-+#endif
-+ return cycles;
-+}
++ if (config & MEMC_CONFIG_DDR) {
++ ret = (wr << 16) | (rd << 8) | dqsg;
++ } else {
++ if (rev > 0)
++ cd = rd;
++ else
++ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
++ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
++ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
++ ret = (sm << 16) | (sd << 8) | cd;
++ }
+
-+void *
-+osl_reg_map(uint32 pa, uint size)
-+{
-+ return (ioremap_nocache((unsigned long)pa, (unsigned long)size));
-+}
++out:
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
+
-+void
-+osl_reg_unmap(void *va)
-+{
-+ iounmap(va);
++ return ret;
+}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c 2005-08-28 11:12:20.479851704 +0200
+@@ -0,0 +1,530 @@
++/*
++ * Low-Level PCI and SB support for BCM47xx
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
++ */
+
-+int
-+osl_busprobe(uint32 *val, uint32 addr)
-+{
-+#ifdef mips
-+ return get_dbe(*val, (uint32*)addr);
-+#else
-+ *val = readl(addr);
-+ return 0;
++#include <typedefs.h>
++#include <pcicfg.h>
++#include <bcmdevs.h>
++#include <sbconfig.h>
++#include <sbpci.h>
++#include <osl.h>
++#include <bcmendian.h>
++#include <bcmutils.h>
++#include <sbutils.h>
++#include <bcmnvram.h>
++#include <hndmips.h>
++
++/* Can free sbpci_init() memory after boot */
++#ifndef linux
++#define __init
+#endif
-+}
+
-+void*
-+osl_dma_alloc_consistent(void *dev, uint size, ulong *pap)
-+{
-+ return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap));
-+}
++/* Emulated configuration space */
++static pci_config_regs sb_config_regs[SB_MAXCORES];
+
-+void
-+osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa)
-+{
-+ pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa);
-+}
++/* Banned cores */
++static uint16 pci_ban[32] = { 0 };
++static uint pci_banned = 0;
+
-+uint
-+osl_dma_map(void *dev, void *va, uint size, int direction)
-+{
-+ int dir;
++/* CardBus mode */
++static bool cardbus = FALSE;
+
-+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+ return (pci_map_single(dev, va, size, dir));
-+}
++/*
++ * Functions for accessing external PCI configuration space
++ */
+
-+void
-+osl_dma_unmap(void *dev, uint pa, uint size, int direction)
++/* Assume one-hot slot wiring */
++#define PCI_SLOT_MAX 16
++
++static uint32
++config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
+{
-+ int dir;
++ uint coreidx;
++ sbpciregs_t *regs;
++ uint32 addr = 0;
+
-+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+ pci_unmap_single(dev, (uint32)pa, size, dir);
-+}
++ /* CardBusMode supports only one device */
++ if (cardbus && dev > 1)
++ return 0;
+
-+void
-+osl_delay(uint usec)
-+{
-+ udelay(usec);
-+}
++ coreidx = sb_coreidx(sbh);
++ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
+
-+uchar*
-+osl_pktdata(void *drv, void *skb)
-+{
-+ return (((struct sk_buff*)skb)->data);
-+}
++ /* Type 0 transaction */
++ if (bus == 1) {
++ /* Skip unwired slots */
++ if (dev < PCI_SLOT_MAX) {
++ /* Slide the PCI window to the appropriate slot */
++ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
++ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
++ (func << 8) | (off & ~3);
++ }
++ }
+
-+uint
-+osl_pktlen(void *drv, void *skb)
-+{
-+ return (((struct sk_buff*)skb)->len);
-+}
++ /* Type 1 transaction */
++ else {
++ W_REG(®s->sbtopci1, SBTOPCI_CFG1);
++ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
++ }
+
-+void*
-+osl_pktnext(void *drv, void *skb)
-+{
-+ return (((struct sk_buff*)skb)->next);
-+}
++ sb_setcoreidx(sbh, coreidx);
+
-+void
-+osl_pktsetnext(void *skb, void *x)
-+{
-+ ((struct sk_buff*)skb)->next = (struct sk_buff*)x;
++ return addr;
+}
+
-+void
-+osl_pktsetlen(void *drv, void *skb, uint len)
++static int
++extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ __skb_trim((struct sk_buff*)skb, len);
-+}
++ uint32 addr, *reg = NULL, val;
++ int ret = 0;
+
-+uchar*
-+osl_pktpush(void *drv, void *skb, int bytes)
-+{
-+ return (skb_push((struct sk_buff*)skb, bytes));
-+}
++ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
++ !(reg = (uint32 *) REG_MAP(addr, len)) ||
++ BUSPROBE(val, reg))
++ val = 0xffffffff;
+
-+uchar*
-+osl_pktpull(void *drv, void *skb, int bytes)
-+{
-+ return (skb_pull((struct sk_buff*)skb, bytes));
-+}
++ val >>= 8 * (off & 3);
++ if (len == 4)
++ *((uint32 *) buf) = val;
++ else if (len == 2)
++ *((uint16 *) buf) = (uint16) val;
++ else if (len == 1)
++ *((uint8 *) buf) = (uint8) val;
++ else
++ ret = -1;
+
-+void*
-+osl_pktdup(void *drv, void *skb)
-+{
-+ return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
-+}
++ if (reg)
++ REG_UNMAP(reg);
+
-+void*
-+osl_pktcookie(void *skb)
-+{
-+ return ((void*)((struct sk_buff*)skb)->csum);
++ return ret;
+}
+
-+void
-+osl_pktsetcookie(void *skb, void *x)
++static int
++extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ ((struct sk_buff*)skb)->csum = (uint)x;
-+}
++ uint32 addr, *reg = NULL, val;
++ int ret = 0;
+
-+void*
-+osl_pktlink(void *skb)
-+{
-+ return (((struct sk_buff*)skb)->prev);
-+}
++ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
++ !(reg = (uint32 *) REG_MAP(addr, len)) ||
++ BUSPROBE(val, reg))
++ goto done;
+
-+void
-+osl_pktsetlink(void *skb, void *x)
-+{
-+ ((struct sk_buff*)skb)->prev = (struct sk_buff*)x;
-+}
++ if (len == 4)
++ val = *((uint32 *) buf);
++ else if (len == 2) {
++ val &= ~(0xffff << (8 * (off & 3)));
++ val |= *((uint16 *) buf) << (8 * (off & 3));
++ } else if (len == 1) {
++ val &= ~(0xff << (8 * (off & 3)));
++ val |= *((uint8 *) buf) << (8 * (off & 3));
++ } else
++ ret = -1;
+
-+#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c 2005-08-28 11:12:20.478851856 +0200
-@@ -0,0 +1,950 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane MIPS core routines
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
++ W_REG(reg, val);
+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <hndmips.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbchipc.h>
-+#include <sbmemc.h>
++ done:
++ if (reg)
++ REG_UNMAP(reg);
+
-+/*
-+ * Memory segments (32bit kernel mode addresses)
-+ */
-+#undef KUSEG
-+#undef KSEG0
-+#undef KSEG1
-+#undef KSEG2
-+#undef KSEG3
-+#define KUSEG 0x00000000
-+#define KSEG0 0x80000000
-+#define KSEG1 0xa0000000
-+#define KSEG2 0xc0000000
-+#define KSEG3 0xe0000000
++ return ret;
++}
+
+/*
-+ * Map an address to a certain kernel segment
++ * Functions for accessing translated SB configuration space
+ */
-+#undef KSEG0ADDR
-+#undef KSEG1ADDR
-+#undef KSEG2ADDR
-+#undef KSEG3ADDR
-+#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0)
-+#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1)
-+#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2)
-+#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3)
+
-+/*
-+ * The following macros are especially useful for __asm__
-+ * inline assembler.
-+ */
-+#ifndef __STR
-+#define __STR(x) #x
-+#endif
-+#ifndef STR
-+#define STR(x) __STR(x)
-+#endif
++static int
++sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ pci_config_regs *cfg;
+
-+/* *********************************************************************
-+ * CP0 Registers
-+ ********************************************************************* */
++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
++ return -1;
++ cfg = &sb_config_regs[dev];
+
-+#define C0_INX 0 /* CP0: TLB Index */
-+#define C0_RAND 1 /* CP0: TLB Random */
-+#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
-+#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
-+#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
-+#define C0_CTEXT 4 /* CP0: Context */
-+#define C0_PGMASK 5 /* CP0: TLB PageMask */
-+#define C0_WIRED 6 /* CP0: TLB Wired */
-+#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
-+#define C0_COUNT 9 /* CP0: Count */
-+#define C0_TLBHI 10 /* CP0: TLB EntryHi */
-+#define C0_COMPARE 11 /* CP0: Compare */
-+#define C0_SR 12 /* CP0: Processor Status */
-+#define C0_STATUS C0_SR /* CP0: Processor Status */
-+#define C0_CAUSE 13 /* CP0: Exception Cause */
-+#define C0_EPC 14 /* CP0: Exception PC */
-+#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
-+#define C0_CONFIG 16 /* CP0: Config */
-+#define C0_LLADDR 17 /* CP0: LLAddr */
-+#define C0_WATCHLO 18 /* CP0: WatchpointLo */
-+#define C0_WATCHHI 19 /* CP0: WatchpointHi */
-+#define C0_XCTEXT 20 /* CP0: XContext */
-+#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
-+#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
-+#define C0_ECC 26 /* CP0: ECC */
-+#define C0_CACHEERR 27 /* CP0: CacheErr */
-+#define C0_TAGLO 28 /* CP0: TagLo */
-+#define C0_TAGHI 29 /* CP0: TagHi */
-+#define C0_ERREPC 30 /* CP0: ErrorEPC */
++ ASSERT(ISALIGNED(off, len));
++ ASSERT(ISALIGNED(buf, len));
+
-+/*
-+ * Macros to access the system control coprocessor
-+ */
++ if (len == 4)
++ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
++ else if (len == 2)
++ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
++ else if (len == 1)
++ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
++ else
++ return -1;
+
-+#define MFC0(source, sel) \
-+({ \
-+ int __res; \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ ".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t" \
-+ "move\t%0,$1\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ :"=r" (__res) \
-+ : \
-+ :"$1"); \
-+ __res; \
-+})
++ return 0;
++}
+
-+#define MTC0(source, sel, value) \
-+do { \
-+ __asm__ __volatile__( \
-+ ".set\tnoreorder\n\t" \
-+ ".set\tnoat\n\t" \
-+ "move\t$1,%z0\n\t" \
-+ ".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t" \
-+ ".set\tat\n\t" \
-+ ".set\treorder" \
-+ : \
-+ :"Jr" (value) \
-+ :"$1"); \
-+} while (0)
++static int
++sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ uint coreidx, n;
++ void *regs;
++ sbconfig_t *sb;
++ pci_config_regs *cfg;
+
-+/*
-+ * R4x00 interrupt enable / cause bits
-+ */
-+#undef IE_SW0
-+#undef IE_SW1
-+#undef IE_IRQ0
-+#undef IE_IRQ1
-+#undef IE_IRQ2
-+#undef IE_IRQ3
-+#undef IE_IRQ4
-+#undef IE_IRQ5
-+#define IE_SW0 (1<< 8)
-+#define IE_SW1 (1<< 9)
-+#define IE_IRQ0 (1<<10)
-+#define IE_IRQ1 (1<<11)
-+#define IE_IRQ2 (1<<12)
-+#define IE_IRQ3 (1<<13)
-+#define IE_IRQ4 (1<<14)
-+#define IE_IRQ5 (1<<15)
++ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
++ return -1;
++ cfg = &sb_config_regs[dev];
+
-+/*
-+ * Bitfields in the R4xx0 cp0 status register
-+ */
-+#define ST0_IE 0x00000001
-+#define ST0_EXL 0x00000002
-+#define ST0_ERL 0x00000004
-+#define ST0_KSU 0x00000018
-+# define KSU_USER 0x00000010
-+# define KSU_SUPERVISOR 0x00000008
-+# define KSU_KERNEL 0x00000000
-+#define ST0_UX 0x00000020
-+#define ST0_SX 0x00000040
-+#define ST0_KX 0x00000080
-+#define ST0_DE 0x00010000
-+#define ST0_CE 0x00020000
++ ASSERT(ISALIGNED(off, len));
++ ASSERT(ISALIGNED(buf, len));
+
-+/*
-+ * Status register bits available in all MIPS CPUs.
-+ */
-+#define ST0_IM 0x0000ff00
-+#define ST0_CH 0x00040000
-+#define ST0_SR 0x00100000
-+#define ST0_TS 0x00200000
-+#define ST0_BEV 0x00400000
-+#define ST0_RE 0x02000000
-+#define ST0_FR 0x04000000
-+#define ST0_CU 0xf0000000
-+#define ST0_CU0 0x10000000
-+#define ST0_CU1 0x20000000
-+#define ST0_CU2 0x40000000
-+#define ST0_CU3 0x80000000
-+#define ST0_XX 0x80000000 /* MIPS IV naming */
++ /* Emulate BAR sizing */
++ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
++ len == 4 && *((uint32 *) buf) == ~0) {
++ coreidx = sb_coreidx(sbh);
++ if ((regs = sb_setcoreidx(sbh, dev))) {
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ /* Highest numbered address match register */
++ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
++ if (off == OFFSETOF(pci_config_regs, base[0]))
++ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
++ /*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
++ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
++ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
++ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
++ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
++ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/
++ }
++ sb_setcoreidx(sbh, coreidx);
++ return 0;
++ }
+
-+/*
-+ * Cache Operations
-+ */
++ if (len == 4)
++ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
++ else if (len == 2)
++ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
++ else if (len == 1)
++ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
++ else
++ return -1;
+
-+#ifndef Fill_I
-+#define Fill_I 0x14
-+#endif
++ return 0;
++}
+
-+#define cache_unroll(base,op) \
-+ __asm__ __volatile__(" \
-+ .set noreorder; \
-+ .set mips3; \
-+ cache %1, (%0); \
-+ .set mips0; \
-+ .set reorder" \
-+ : \
-+ : "r" (base), \
-+ "i" (op));
-+
-+/*
-+ * These are the UART port assignments, expressed as offsets from the base
-+ * register. These assignments should hold for any serial port based on
-+ * a 8250, 16450, or 16550(A).
-+ */
-+
-+#define UART_MCR 4 /* Out: Modem Control Register */
-+#define UART_MSR 6 /* In: Modem Status Register */
-+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-+
-+/*
-+ * Returns TRUE if an external UART exists at the given base
-+ * register.
-+ */
-+static bool
-+serial_exists(uint8 *regs)
++int
++sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
+{
-+ uint8 save_mcr, status1;
-+
-+ save_mcr = R_REG(®s[UART_MCR]);
-+ W_REG(®s[UART_MCR], UART_MCR_LOOP | 0x0a);
-+ status1 = R_REG(®s[UART_MSR]) & 0xf0;
-+ W_REG(®s[UART_MCR], save_mcr);
++ if (bus == 0)
++ return sb_read_config(sbh, bus, dev, func, off, buf, len);
++ else
++ return extpci_read_config(sbh, bus, dev, func, off, buf, len);
++}
+
-+ return (status1 == 0x90);
++int
++sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++ if (bus == 0)
++ return sb_write_config(sbh, bus, dev, func, off, buf, len);
++ else
++ return extpci_write_config(sbh, bus, dev, func, off, buf, len);
+}
+
-+/*
-+ * Initializes UART access. The callback function will be called once
-+ * per found UART.
-+*/
+void
-+sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
++sbpci_ban(uint16 core)
+{
-+ void *regs;
-+ ulong base;
-+ uint irq;
-+ int i, n;
-+
-+ if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
-+ extifregs_t *eir = (extifregs_t *) regs;
-+ sbconfig_t *sb;
-+
-+ /* Determine external UART register base */
-+ sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
-+ base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
++ if (pci_banned < ARRAYSIZE(pci_ban))
++ pci_ban[pci_banned++] = core;
++}
+
-+ /* Determine IRQ */
-+ irq = sb_irq(sbh);
++int __init
++sbpci_init(void *sbh)
++{
++ uint chip, chiprev, chippkg, coreidx, host, i;
++ sbpciregs_t *pci;
++ sbconfig_t *sb;
++ pci_config_regs *cfg;
++ void *regs;
++ char varname[8];
++ uint wlidx = 0;
++ uint16 vendor, core;
++ uint8 class, subclass, progif;
++ uint32 val;
++ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
++ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
+
-+ /* Disable GPIO interrupt initially */
-+ W_REG(&eir->gpiointpolarity, 0);
-+ W_REG(&eir->gpiointmask, 0);
++ chip = sb_chip(sbh);
++ chiprev = sb_chiprev(sbh);
++ chippkg = sb_chippkg(sbh);
++ coreidx = sb_coreidx(sbh);
+
-+ /* Search for external UARTs */
-+ n = 2;
-+ for (i = 0; i < 2; i++) {
-+ regs = (void *) REG_MAP(base + (i * 8), 8);
-+ if (serial_exists(regs)) {
-+ /* Set GPIO 1 to be the external UART IRQ */
-+ W_REG(&eir->gpiointmask, 2);
-+ if (add)
-+ add(regs, irq, 13500000, 0);
-+ }
-+ }
++ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
++ return -1;
++ sb_core_reset(sbh, 0);
+
-+ /* Add internal UART if enabled */
-+ if (R_REG(&eir->corecontrol) & CC_UE)
-+ if (add)
-+ add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
-+ } else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
-+ chipcregs_t *cc = (chipcregs_t *) regs;
-+ uint32 rev, cap, pll, baud_base, div;
++ if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ||
++ ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID)))
++ host = 0;
++ else
++ host = !BUSPROBE(val, &pci->control);
+
-+ /* Determine core revision and capabilities */
-+ rev = sb_corerev(sbh);
-+ cap = R_REG(&cc->capabilities);
-+ pll = cap & CAP_PLL_MASK;
++ if (!host) {
++ /* Disable PCI interrupts in client mode */
++ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
++ W_REG(&sb->sbintvec, 0);
+
-+ /* Determine IRQ */
-+ irq = sb_irq(sbh);
++ /* Disable the PCI bridge in client mode */
++ sbpci_ban(SB_PCI);
++ printf("PCI: Disabled\n");
++ } else {
++ /* Reset the external PCI bus and enable the clock */
++ W_REG(&pci->control, 0x5); /* enable the tristate drivers */
++ W_REG(&pci->control, 0xd); /* enable the PCI clock */
++ OSL_DELAY(100); /* delay 100 us */
++ W_REG(&pci->control, 0xf); /* deassert PCI reset */
++ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */
++ OSL_DELAY(1); /* delay 1 us */
+
-+ if (pll == PLL_TYPE1) {
-+ /* PLL clock */
-+ baud_base = sb_clock_rate(pll,
-+ R_REG(&cc->clockcontrol_n),
-+ R_REG(&cc->clockcontrol_m2));
-+ div = 1;
-+ } else if (rev >= 3) {
-+ /* Internal backplane clock */
-+ baud_base = sb_clock_rate(pll,
-+ R_REG(&cc->clockcontrol_n),
-+ R_REG(&cc->clockcontrol_sb));
-+ div = 2; /* Minimum divisor */
-+ W_REG(&cc->uart_clkdiv, div);
-+ } else {
-+ /* Fixed internal backplane clock */
-+ baud_base = 88000000;
-+ div = 48;
++ /* Enable CardBusMode */
++ cardbus = nvram_match("cardbus", "1");
++ if (cardbus) {
++ printf("PCI: Enabling CardBus\n");
++ /* GPIO 1 resets the CardBus device on bcm94710ap */
++ sb_gpioout(sbh, 1, 1);
++ sb_gpioouten(sbh, 1, 1);
++ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
+ }
+
-+ /* Clock source depends on strapping if UartClkOverride is unset */
-+ if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
-+ if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
-+ /* Internal divided backplane clock */
-+ baud_base /= div;
-+ } else {
-+ /* Assume external clock of 1.8432 MHz */
-+ baud_base = 1843200;
-+ }
-+ }
++ /* 64 MB I/O access window */
++ W_REG(&pci->sbtopci0, SBTOPCI_IO);
++ /* 64 MB configuration access window */
++ W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
++ /* 1 GB memory access window */
++ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
+
-+ /* Add internal UARTs */
-+ n = cap & CAP_UARTS_MASK;
-+ for (i = 0; i < n; i++) {
-+ /* Register offset changed after revision 0 */
-+ if (rev)
-+ regs = (void *)((ulong) &cc->uart0data + (i * 256));
-+ else
-+ regs = (void *)((ulong) &cc->uart0data + (i * 8));
++ /* Enable PCI bridge BAR0 prefetch and burst */
++ val = 6;
++ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
+
-+ if (add)
-+ add(regs, irq, baud_base, 0);
-+ }
++ /* Enable PCI interrupts */
++ W_REG(&pci->intmask, PCI_INTA);
+ }
-+}
-+
-+/* Returns the SB interrupt flag of the current core. */
-+uint32
-+sb_flag(void *sbh)
-+{
-+ void *regs;
-+ sbconfig_t *sb;
-+
-+ regs = sb_coreregs(sbh);
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+ return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
-+}
-+
-+static const uint32 sbips_int_mask[] = {
-+ 0,
-+ SBIPS_INT1_MASK,
-+ SBIPS_INT2_MASK,
-+ SBIPS_INT3_MASK,
-+ SBIPS_INT4_MASK
-+};
+
-+static const uint32 sbips_int_shift[] = {
-+ 0,
-+ 0,
-+ SBIPS_INT2_SHIFT,
-+ SBIPS_INT3_SHIFT,
-+ SBIPS_INT4_SHIFT
-+};
++ /* Scan the SB bus */
++ bzero(sb_config_regs, sizeof(sb_config_regs));
++ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
++ cfg->vendor = 0xffff;
++ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
++ continue;
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
+
-+/*
-+ * Returns the MIPS IRQ assignment of the current core. If unassigned,
-+ * 0 is returned.
-+ */
-+uint
-+sb_irq(void *sbh)
-+{
-+ uint idx;
-+ void *regs;
-+ sbconfig_t *sb;
-+ uint32 flag, sbipsflag;
-+ uint irq = 0;
++ /* Read ID register and parse vendor and core */
++ val = R_REG(&sb->sbidhigh);
++ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
++ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
++ progif = 0;
+
-+ flag = sb_flag(sbh);
++ /* Check if this core is banned */
++ for (i = 0; i < pci_banned; i++)
++ if (core == pci_ban[i])
++ break;
++ if (i < pci_banned)
++ continue;
+
-+ idx = sb_coreidx(sbh);
++ /* Known vendor translations */
++ switch (vendor) {
++ case SB_VEND_BCM:
++ vendor = VENDOR_BROADCOM;
++ break;
++ }
+
-+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ /* Determine class based on known core codes */
++ switch (core) {
++ case SB_ILINE20:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM47XX_ILINE_ID;
++ break;
++ case SB_ILINE100:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM4610_ILINE_ID;
++ break;
++ case SB_ENET:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_ETHER;
++ core = BCM47XX_ENET_ID;
++ break;
++ case SB_SDRAM:
++ case SB_MEMC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_RAM;
++ break;
++ case SB_PCI:
++ class = PCI_CLASS_BRIDGE;
++ subclass = PCI_BRIDGE_PCI;
++ //break;
++ case SB_MIPS:
++ case SB_MIPS33:
++ class = PCI_CLASS_CPU;
++ subclass = PCI_CPU_MIPS;
++ break;
++ case SB_CODEC:
++ class = PCI_CLASS_COMM;
++ subclass = PCI_COMM_MODEM;
++ core = BCM47XX_V90_ID;
++ break;
++ case SB_USB:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ core = BCM47XX_USB_ID;
++ break;
++ case SB_USB11H:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ progif = 0x10; /* OHCI */
++ core = BCM47XX_USBH_ID;
++ break;
++ case SB_USB11D:
++ class = PCI_CLASS_SERIAL;
++ subclass = PCI_SERIAL_USB;
++ core = BCM47XX_USBD_ID;
++ break;
++ case SB_IPSEC:
++ class = PCI_CLASS_CRYPT;
++ subclass = PCI_CRYPT_NETWORK;
++ core = BCM47XX_IPSEC_ID;
++ break;
++ case SB_EXTIF:
++ case SB_CC:
++ class = PCI_CLASS_MEMORY;
++ subclass = PCI_MEMORY_FLASH;
++ break;
++ case SB_D11:
++ class = PCI_CLASS_NET;
++ subclass = PCI_NET_OTHER;
++ /* Let an nvram variable override this */
++ sprintf(varname, "wl%did", wlidx);
++ wlidx++;
++ if ((core = getintvar(NULL, varname)) == 0) {
++ if (chip == BCM4712_DEVICE_ID) {
++ if (chippkg == BCM4712SMALL_PKG_ID)
++ core = BCM4306_D11G_ID;
++ else
++ core = BCM4306_D11DUAL_ID;
++ } else {
++ /* 4310 */
++ core = BCM4310_D11B_ID;
++ }
++ }
++ break;
+
-+ /* sbipsflag specifies which core is routed to interrupts 1 to 4 */
-+ sbipsflag = R_REG(&sb->sbipsflag);
-+ for (irq = 1; irq <= 4; irq++) {
-+ if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
-+ break;
++ default:
++ class = subclass = progif = 0xff;
++ break;
+ }
-+ if (irq == 5)
-+ irq = 0;
-+ }
+
-+ sb_setcoreidx(sbh, idx);
++ /* Supported translations */
++ cfg->vendor = htol16(vendor);
++ cfg->device = htol16(core);
++ cfg->rev_id = chiprev;
++ cfg->prog_if = progif;
++ cfg->sub_class = subclass;
++ cfg->base_class = class;
++ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
++ cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/;
++ cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/;
++ cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/;
++ cfg->base[4] = 0;
++ cfg->base[5] = 0;
++ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
++ cfg->header_type = PCI_HEADER_BRIDGE;
++ else
++ cfg->header_type = PCI_HEADER_NORMAL;
++ /* Save core interrupt flag */
++ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
++ /* Default to MIPS shared interrupt 0 */
++ cfg->int_line = 0;
++ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
++ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
++ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ val = R_REG(&sb->sbipsflag);
++ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
++ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
++ break;
++ }
++ if (cfg->int_line > 4)
++ cfg->int_line = 0;
++ }
++ /* Emulated core */
++ *((uint32 *) &cfg->sprom_control) = 0xffffffff;
++ }
+
-+ return irq;
++ sb_setcoreidx(sbh, coreidx);
++ return 0;
+}
+
-+/* Clears the specified MIPS IRQ. */
-+static void
-+sb_clearirq(void *sbh, uint irq)
++void
++sbpci_check(void *sbh)
+{
-+ void *regs;
-+ sbconfig_t *sb;
-+
-+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+ ASSERT(regs);
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+ if (irq == 0)
-+ W_REG(&sb->sbintvec, 0);
-+ else
-+ OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
-+}
++ uint coreidx;
++ sbpciregs_t *pci;
++ uint32 sbtopci1;
++ uint32 buf[64], *ptr, i;
++ ulong pa;
++ volatile uint j;
+
-+/*
-+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
-+ * IRQ 0 may be assigned more than once.
-+ */
-+static void
-+sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit)
-+{
-+ void *regs;
-+ sbconfig_t *sb;
-+ uint32 flag;
++ coreidx = sb_coreidx(sbh);
++ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
+
-+ regs = sb_setcore(sbh, coreid, coreunit);
-+ ASSERT(regs);
-+ flag = sb_flag(sbh);
++ /* Clear the test array */
++ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
++ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
++ memset(ptr, 0, sizeof(buf));
+
-+ if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+ !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+ ASSERT(regs);
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ /* Point PCI window 1 to memory */
++ sbtopci1 = R_REG(&pci->sbtopci1);
++ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));
+
-+ if (irq == 0)
-+ OR_REG(&sb->sbintvec, 1 << flag);
-+ else {
-+ flag <<= sbips_int_shift[irq];
-+ ASSERT(!(flag & ~sbips_int_mask[irq]));
-+ flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
-+ W_REG(&sb->sbipsflag, flag);
++ /* Fill the test array via PCI window 1 */
++ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
++ for (i = 0; i < ARRAYSIZE(buf); i++) {
++ for (j = 0; j < 2; j++);
++ W_REG(&ptr[i], i);
+ }
-+}
++ REG_UNMAP(ptr);
+
-+/*
-+ * Initializes clocks and interrupts. SB and NVRAM access must be
-+ * initialized prior to calling.
-+ */
-+void
-+sb_mips_init(void *sbh)
-+{
-+ ulong hz, ns, tmp;
-+ extifregs_t *eir;
-+ chipcregs_t *cc;
-+ char *value;
-+ uint irq;
++ /* Restore PCI window 1 */
++ W_REG(&pci->sbtopci1, sbtopci1);
+
-+ /* Figure out current SB clock speed */
-+ if ((hz = sb_clock(sbh)) == 0)
-+ hz = 100000000;
-+ ns = 1000000000 / hz;
++ /* Check the test array */
++ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
++ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
++ for (i = 0; i < ARRAYSIZE(buf); i++) {
++ if (ptr[i] != i)
++ break;
++ }
+
-+ /* Setup external interface timing */
-+ if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
-+ /* Initialize extif so we can get to the LEDs and external UART */
-+ W_REG(&eir->prog_config, CF_EN);
++ /* Change the clock if the test fails */
++ if (i < ARRAYSIZE(buf)) {
++ uint32 req, cur;
+
-+ /* Set timing for the flash */
-+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
-+ tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
-+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
-+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
++ cur = sb_clock(sbh);
++ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
++ for (req = 104000000; req < 176000000; req += 4000000) {
++ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
++ /* This will only reset if the clocks are valid and have changed */
++ sb_mips_setclock(sbh, req, 0, 0);
++ }
++ /* Should not reach here */
++ ASSERT(0);
++ }
+
-+ /* Set programmable interface timing for external uart */
-+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
-+ tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-+ tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-+ tmp = tmp | CEIL(120, ns); /* W0 = 120nS */
-+ W_REG(&eir->prog_waitcount, tmp); /* 0x01020a0c for a 100Mhz clock */
-+ } else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-+ /* Set timing for the flash */
-+ tmp = CEIL(10, ns) << FW_W3_SHIFT; /* W3 = 10nS */
-+ tmp |= CEIL(10, ns) << FW_W1_SHIFT; /* W1 = 10nS */
-+ tmp |= CEIL(120, ns); /* W0 = 120nS */
-+ W_REG(&cc->parallelflashwaitcnt, tmp);
++ sb_setcoreidx(sbh, coreidx);
++}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c 2005-08-28 11:12:20.482851248 +0200
+@@ -0,0 +1,1895 @@
++/*
++ * Misc utility routines for accessing chip-specific features
++ * of the SiliconBackplane-based Broadcom chips.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
+
-+ W_REG(&cc->cs01memwaitcnt, tmp);
-+ }
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmdevs.h>
++#include <sbconfig.h>
++#include <sbchipc.h>
++#include <sbpci.h>
++#include <pcicfg.h>
++#include <sbpcmcia.h>
++#include <sbextif.h>
++#include <sbutils.h>
++#include <bcmsrom.h>
+
-+ /* Chip specific initialization */
-+ switch (sb_chip(sbh)) {
-+ case BCM4710_DEVICE_ID:
-+ /* Clear interrupt map */
-+ for (irq = 0; irq <= 4; irq++)
-+ sb_clearirq(sbh, irq);
-+ sb_setirq(sbh, 0, SB_CODEC, 0);
-+ sb_setirq(sbh, 0, SB_EXTIF, 0);
-+ sb_setirq(sbh, 2, SB_ENET, 1);
-+ sb_setirq(sbh, 3, SB_ILINE20, 0);
-+ sb_setirq(sbh, 4, SB_PCI, 0);
-+ ASSERT(eir);
-+ value = nvram_get("et0phyaddr");
-+ if (value && !strcmp(value, "31")) {
-+ /* Enable internal UART */
-+ W_REG(&eir->corecontrol, CC_UE);
-+ /* Give USB its own interrupt */
-+ sb_setirq(sbh, 1, SB_USB, 0);
-+ } else {
-+ /* Disable internal UART */
-+ W_REG(&eir->corecontrol, 0);
-+ /* Give Ethernet its own interrupt */
-+ sb_setirq(sbh, 1, SB_ENET, 0);
-+ sb_setirq(sbh, 0, SB_USB, 0);
-+ }
-+ break;
-+ case BCM4310_DEVICE_ID:
-+ MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22));
-+ break;
-+ }
-+}
++/* debug/trace */
++#define SB_ERROR(args)
+
-+uint32
-+sb_mips_clock(void *sbh)
-+{
-+ extifregs_t *eir;
-+ chipcregs_t *cc;
-+ uint32 n, m;
-+ uint idx;
-+ uint32 pll_type, rate = 0;
++typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
++typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
+
-+ /* get index of the current core */
-+ idx = sb_coreidx(sbh);
-+ pll_type = PLL_TYPE1;
++/* misc sb info needed by some of the routines */
++typedef struct sb_info {
++ uint chip; /* chip number */
++ uint chiprev; /* chip revision */
++ uint chippkg; /* chip package option */
++ uint boardtype; /* board type */
++ uint boardvendor; /* board vendor id */
++ uint bus; /* what bus type we are going through */
+
-+ /* switch to extif or chipc core */
-+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+ n = R_REG(&eir->clockcontrol_n);
-+ m = R_REG(&eir->clockcontrol_sb);
-+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+ n = R_REG(&cc->clockcontrol_n);
-+ if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4))
-+ m = R_REG(&cc->clockcontrol_mips);
-+ else if (pll_type == PLL_TYPE3) {
-+ rate = 200000000;
-+ goto out;
-+ } else
-+ m = R_REG(&cc->clockcontrol_sb);
-+ } else
-+ goto out;
++ void *osh; /* osl os handle */
++ void *sdh; /* bcmsdh handle */
+
-+ /* calculate rate */
-+ rate = sb_clock_rate(pll_type, n, m);
++ void *curmap; /* current regs va */
++ void *regs[SB_MAXCORES]; /* other regs va */
+
-+out:
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
++ uint curidx; /* current core index */
++ uint dev_coreid; /* the core provides driver functions */
++ uint pciidx; /* pci core index */
++ uint pcirev; /* pci core rev */
+
-+ return rate;
-+}
++ uint pcmciaidx; /* pcmcia core index */
++ uint pcmciarev; /* pcmcia core rev */
++ bool memseg; /* flag to toggle MEM_SEG register */
+
-+static void
-+icache_probe(int *size, int *lsize)
-+{
-+ uint32 config1;
-+ uint sets, ways;
++ uint ccrev; /* chipc core rev */
+
-+ config1 = MFC0(C0_CONFIG, 1);
++ uint gpioidx; /* gpio control core index */
++ uint gpioid; /* gpio control coretype */
+
-+ /* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
-+ if ((*lsize = ((config1 >> 19) & 7)))
-+ *lsize = 2 << *lsize;
-+ sets = 64 << ((config1 >> 22) & 7);
-+ ways = 1 + ((config1 >> 16) & 7);
-+ *size = *lsize * sets * ways;
-+}
++ uint numcores; /* # discovered cores */
++ uint coreid[SB_MAXCORES]; /* id of each core */
+
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
++ void *intr_arg; /* interrupt callback function arg */
++ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */
++ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */
++} sb_info_t;
+
-+static void
-+handler(void)
++/* local prototypes */
++static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
++static void sb_scan(sb_info_t *si);
++static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
++static uint _sb_coreidx(void *sbh);
++static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
++static uint sb_pcidev2chip(uint pcidev);
++static uint sb_chip2numcores(uint chip);
++
++#define SB_INFO(sbh) (sb_info_t*)sbh
++#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
++#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \
++ && ISALIGNED((x), SB_CORE_SIZE))
++#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE))
++#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
++#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
++#define BADIDX (SB_MAXCORES+1)
++
++#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr))
++#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v))
++#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
++#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
++
++/*
++ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
++ * after core switching to avoid invalid register accesss inside ISR.
++ */
++#define INTR_OFF(si, intr_val) \
++ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
++ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
++#define INTR_RESTORE(si, intr_val) \
++ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
++ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
++
++/* power control defines */
++#define PLL_DELAY 150 /* 150us pll on delay */
++#define FREF_DELAY 15 /* 15us fref change delay */
++#define LPOMINFREQ 25000 /* low power oscillator min */
++#define LPOMAXFREQ 43000 /* low power oscillator max */
++#define XTALMINFREQ 19800000 /* 20mhz - 1% */
++#define XTALMAXFREQ 20200000 /* 20mhz + 1% */
++#define PCIMINFREQ 25000000 /* 25mhz */
++#define PCIMAXFREQ 34000000 /* 33mhz + fudge */
++
++#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */
++
++
++static uint32
++sb_read_sbreg(void *sbh, volatile uint32 *sbr)
+{
-+ /* Step 11 */
-+ __asm__ (
-+ ".set\tmips32\n\t"
-+ "ssnop\n\t"
-+ "ssnop\n\t"
-+ /* Disable interrupts */
-+ /* MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
-+ "mfc0 $15, $12\n\t"
-+ "and $15, $15, -31746\n\t"
-+ "mtc0 $15, $12\n\t"
-+ "eret\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ ".set\tmips0"
-+ );
++ sb_info_t *si;
++ uint8 tmp;
++ uint32 val, intr_val = 0;
++
++ si = SB_INFO(sbh);
++
++ /*
++ * compact flash only has 11 bits address, while we needs 12 bits address.
++ * MEM_SEG will be OR'd with other 11 bits address in hardware,
++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
++ */
++ if(si->memseg) {
++ INTR_OFF(si, intr_val);
++ tmp = 1;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/
++ }
++
++ val = R_REG(sbr);
++
++ if(si->memseg) {
++ tmp = 0;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ INTR_RESTORE(si, intr_val);
++ }
++
++ return (val);
+}
+
-+/* The following MUST come right after handler() */
+static void
-+afterhandler(void)
++sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
+{
-+}
++ sb_info_t *si;
++ uint8 tmp;
++ volatile uint32 dummy;
++ uint32 intr_val = 0;
+
-+/*
-+ * Set the MIPS, backplane and PCI clocks as closely as possible.
-+ */
-+bool
-+sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
-+{
-+ extifregs_t *eir = NULL;
-+ chipcregs_t *cc = NULL;
-+ mipsregs_t *mipsr = NULL;
-+ volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci;
-+ uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio;
-+ uint32 pll_type, sync_mode;
-+ uint idx, i;
-+ struct {
-+ uint32 mipsclock;
-+ uint16 n;
-+ uint32 sb;
-+ uint32 pci33;
-+ uint32 pci25;
-+ } type1_table[] = {
-+ { 96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /* 96.000 32.000 24.000 */
-+ { 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
-+ { 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
-+ { 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
-+ { 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
-+ { 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
-+ { 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
-+ { 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
-+ { 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
-+ { 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
-+ { 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
-+ { 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
-+ { 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
-+ { 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
-+ { 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
-+ { 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
-+ { 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
-+ { 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
-+ { 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
-+ { 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
-+ };
-+ typedef struct {
-+ uint32 mipsclock;
-+ uint32 sbclock;
-+ uint16 n;
-+ uint32 sb;
-+ uint32 pci33;
-+ uint32 m2;
-+ uint32 m3;
-+ uint32 ratio;
-+ uint32 ratio_parm;
-+ } n4m_table_t;
-+
-+ n4m_table_t type2_table[] = {
-+ { 180000000, 80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 180000000, 90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+ { 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 240000000, 120000000, 0x0803, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 252000000, 126000000, 0x0504, 0x01000100, 0x01020500, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+ { 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+ { 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+ { 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+ { 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }
-+ };
-+
-+ n4m_table_t type4_table[] = {
-+ { 192000000, 96000000, 0x0702, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+ { 200000000, 100000000, 0x0009, 0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+ { 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+ { 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 },
-+ { 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+ { 240000000, 120000000, 0x0109, 0x11030002, 0x01050203, 0x11030002, 0x04000003, 0x21, 0x0aaa0555 },
-+ { 252000000, 126000000, 0x0203, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+ { 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+ { 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+ { 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 }
-+ };
-+ uint icache_size, ic_lsize;
-+ ulong start, end, dst;
-+ bool ret = FALSE;
++ si = SB_INFO(sbh);
+
-+ /* get index of the current core */
-+ idx = sb_coreidx(sbh);
++ /*
++ * compact flash only has 11 bits address, while we needs 12 bits address.
++ * MEM_SEG will be OR'd with other 11 bits address in hardware,
++ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
++ */
++ if(si->memseg) {
++ INTR_OFF(si, intr_val);
++ tmp = 1;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */
++ }
+
-+ /* switch to extif or chipc core */
-+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+ pll_type = PLL_TYPE1;
-+ clockcontrol_n = &eir->clockcontrol_n;
-+ clockcontrol_sb = &eir->clockcontrol_sb;
-+ clockcontrol_pci = &eir->clockcontrol_pci;
-+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+ clockcontrol_n = &cc->clockcontrol_n;
-+ clockcontrol_sb = &cc->clockcontrol_sb;
-+ clockcontrol_pci = &cc->clockcontrol_pci;
++ if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) {
++#ifdef IL_BIGENDIAN
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
++#else
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
++ dummy = R_REG(sbr);
++ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
++#endif
+ } else
-+ goto done;
-+
-+ /* Store the current clock register values */
-+ orig_n = R_REG(clockcontrol_n);
-+ orig_sb = R_REG(clockcontrol_sb);
-+ orig_pci = R_REG(clockcontrol_pci);
++ W_REG(sbr, v);
+
-+ if (pll_type == PLL_TYPE1) {
-+ /* Keep the current PCI clock if not specified */
-+ if (pciclock == 0) {
-+ pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
-+ pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
-+ }
++ if(si->memseg) {
++ tmp = 0;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++ INTR_RESTORE(si, intr_val);
++ }
++}
+
-+ /* Search for the closest MIPS clock less than or equal to a preferred value */
-+ for (i = 0; i < ARRAYSIZE(type1_table); i++) {
-+ ASSERT(type1_table[i].mipsclock ==
-+ sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb));
-+ if (type1_table[i].mipsclock > mipsclock)
-+ break;
-+ }
-+ if (i == 0) {
-+ ret = FALSE;
-+ goto done;
-+ } else {
-+ ret = TRUE;
-+ i--;
-+ }
-+ ASSERT(type1_table[i].mipsclock <= mipsclock);
++/*
++ * Allocate a sb handle.
++ * devid - pci device id (used to determine chip#)
++ * osh - opaque OS handle
++ * regs - virtual address of initial core registers
++ * bustype - pci/pcmcia/sb/sdio/etc
++ * vars - pointer to a pointer area for "environment" variables
++ * varsz - pointer to int to return the size of the vars
++ */
++void*
++sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++{
++ sb_info_t *si;
+
-+ /* No PLL change */
-+ if ((orig_n == type1_table[i].n) &&
-+ (orig_sb == type1_table[i].sb) &&
-+ (orig_pci == type1_table[i].pci33))
-+ goto done;
++ /* alloc sb_info_t */
++ if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
++ SB_ERROR(("sb_attach: malloc failed!\n"));
++ return (NULL);
++ }
+
-+ /* Set the PLL controls */
-+ W_REG(clockcontrol_n, type1_table[i].n);
-+ W_REG(clockcontrol_sb, type1_table[i].sb);
-+ if (pciclock == 25000000)
-+ W_REG(clockcontrol_pci, type1_table[i].pci25);
-+ else
-+ W_REG(clockcontrol_pci, type1_table[i].pci33);
++ return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
++}
+
-+ /* Reset */
-+ sb_watchdog(sbh, 1);
-+ while (1);
-+ } else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) {
-+ n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table;
-+ uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table);
++/* global kernel resource */
++static sb_info_t ksi;
+
-+ ASSERT(cc);
++/* generic kernel variant of sb_attach() */
++void*
++sb_kattach()
++{
++ uint32 *regs;
++ char *unused;
++ int varsz;
+
-+ /* Store the current clock register values */
-+ orig_m2 = R_REG(&cc->clockcontrol_m2);
-+ orig_mips = R_REG(&cc->clockcontrol_mips);
-+ orig_ratio_parm = 0;
++ if (ksi.curmap == NULL) {
++ uint32 cid;
++ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
++ cid = R_REG((uint32 *)regs);
++ if ((cid == 0x08104712) || (cid == 0x08114712)) {
++ uint32 *scc, val;
+
-+ /* Look up current ratio */
-+ for (i = 0; i < tabsz; i++) {
-+ if ((orig_n == table[i].n) &&
-+ (orig_sb == table[i].sb) &&
-+ (orig_pci == table[i].pci33) &&
-+ (orig_m2 == table[i].m2) &&
-+ (orig_mips == table[i].m3)) {
-+ orig_ratio_parm = table[i].ratio_parm;
-+ break;
-+ }
++ scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
++ val = R_REG(scc);
++ SB_ERROR((" initial scc = 0x%x\n", val));
++ val |= SCC_SS_XTAL;
++ W_REG(scc, val);
+ }
+
-+ /* Search for the closest MIPS clock greater or equal to a preferred value */
-+ for (i = 0; i < tabsz; i++) {
-+ ASSERT(table[i].mipsclock ==
-+ sb_clock_rate(pll_type, table[i].n, table[i].m3));
-+ if ((mipsclock <= table[i].mipsclock) &&
-+ ((sbclock == 0) || (sbclock <= table[i].sbclock)))
-+ break;
-+ }
-+ if (i == tabsz) {
-+ ret = FALSE;
-+ goto done;
-+ } else {
-+ ret = TRUE;
-+ }
++ sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
++ SB_BUS, NULL, &unused, &varsz);
++ }
+
-+ /* No PLL change */
-+ if ((orig_n == table[i].n) &&
-+ (orig_sb == table[i].sb) &&
-+ (orig_pci == table[i].pci33) &&
-+ (orig_m2 == table[i].m2) &&
-+ (orig_mips == table[i].m3))
-+ goto done;
++ return &ksi;
++}
+
-+ /* Set the PLL controls */
-+ W_REG(clockcontrol_n, table[i].n);
-+ W_REG(clockcontrol_sb, table[i].sb);
-+ W_REG(clockcontrol_pci, table[i].pci33);
-+ W_REG(&cc->clockcontrol_m2, table[i].m2);
-+ W_REG(&cc->clockcontrol_mips, table[i].m3);
-+
-+ /* No ratio change */
-+ if (orig_ratio_parm == table[i].ratio_parm)
-+ goto end_fill;
-+
-+ new_ratio = table[i].ratio_parm;
++static void*
++sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++{
++ uint origidx;
++ chipcregs_t *cc;
++ uint32 w;
+
-+ icache_probe(&icache_size, &ic_lsize);
++ ASSERT(GOODREGS(regs));
+
-+ /* Preload the code into the cache */
-+ start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
-+ end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
-+ while (start < end) {
-+ cache_unroll(start, Fill_I);
-+ start += ic_lsize;
-+ }
++ bzero((uchar*)si, sizeof (sb_info_t));
+
-+ /* Copy the handler */
-+ start = (ulong) &handler;
-+ end = (ulong) &afterhandler;
-+ dst = KSEG1ADDR(0x180);
-+ for (i = 0; i < (end - start); i += 4)
-+ *((ulong *)(dst + i)) = *((ulong *)(start + i));
-+
-+ /* Preload handler into the cache one line at a time */
-+ for (i = 0; i < (end - start); i += 4)
-+ cache_unroll(dst + i, Fill_I);
++ si->pciidx = si->gpioidx = BADIDX;
+
-+ /* Clear BEV bit */
-+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
++ si->osh = osh;
++ si->curmap = regs;
++ si->sdh = sdh;
+
-+ /* Enable interrupts */
-+ MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
++ /* 4317A0 PCMCIA is no longer supported */
++ if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317))
++ return NULL;
+
-+ /* Enable MIPS timer interrupt */
-+ if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
-+ !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
-+ ASSERT(mipsr);
-+ W_REG(&mipsr->intmask, 1);
++ /* check to see if we are a sb core mimic'ing a pci core */
++ if (bustype == PCI_BUS) {
++ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
++ bustype = SB_BUS;
++ else
++ bustype = PCI_BUS;
++ }
+
-+ start_fill:
-+ /* step 1, set clock ratios */
-+ MTC0(C0_BROADCOM, 3, new_ratio);
-+ MTC0(C0_BROADCOM, 1, 8);
++ si->bus = bustype;
+
-+ /* step 2: program timer intr */
-+ W_REG(&mipsr->timer, 100);
-+ (void) R_REG(&mipsr->timer);
++ /* kludge to enable the clock on the 4306 which lacks a slowclock */
++ if (si->bus == PCI_BUS)
++ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
+
-+ /* step 3, switch to async */
-+ sync_mode = MFC0(C0_BROADCOM, 4);
-+ MTC0(C0_BROADCOM, 4, 1 << 22);
++ /* clear any previous epidiag-induced target abort */
++ sb_taclear((void*)si);
+
-+ /* step 4, set cfg active */
-+ MTC0(C0_BROADCOM, 2, 0x9);
++ /* initialize current core index value */
++ si->curidx = _sb_coreidx((void*)si);
+
++ /* keep and reuse the initial register mapping */
++ origidx = si->curidx;
++ if (si->bus == SB_BUS)
++ si->regs[origidx] = regs;
+
-+ /* steps 5 & 6 */
-+ __asm__ __volatile__ (
-+ ".set\tmips3\n\t"
-+ "wait\n\t"
-+ ".set\tmips0"
-+ );
++ /* initialize the vars */
++ if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) {
++ SB_ERROR(("sb_attach: srom_var_init failed\n"));
++ goto bad;
++ }
++
++ if (si->bus == PCMCIA_BUS) {
++ w = getintvar(*vars, "regwindowsz");
++ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
++ }
+
-+ /* step 7, clear cfg_active */
-+ MTC0(C0_BROADCOM, 2, 0);
-+
-+ /* Additional Step: set back to orig sync mode */
-+ MTC0(C0_BROADCOM, 4, sync_mode);
++ /* is core-0 a chipcommon core? */
++ si->numcores = 1;
++ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
++ if (sb_coreid((void*)si) != SB_CC)
++ cc = NULL;
+
-+ /* step 8, fake soft reset */
-+ MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
++ /* determine chip id and rev */
++ if (cc) {
++ /* chip common core found! */
++ si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
++ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
++ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
++ } else {
++ /* without chip common core, get devid for PCMCIA */
++ if (si->bus == PCMCIA_BUS)
++ devid = getintvar(*vars, "devid");
+
-+ end_fill:
-+ /* step 9 set watchdog timer */
-+ sb_watchdog(sbh, 20);
-+ (void) R_REG(&cc->chipid);
++ /* no chip common core -- must convert device id to chip id */
++ if ((si->chip = sb_pcidev2chip(devid)) == 0) {
++ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
++ goto bad;
++ }
+
-+ /* step 11 */
-+ __asm__ __volatile__ (
-+ ".set\tmips3\n\t"
-+ "sync\n\t"
-+ "wait\n\t"
-+ ".set\tmips0"
-+ );
-+ while (1);
++ /*
++ * The chip revision number is hardwired into all
++ * of the pci function config rev fields and is
++ * independent from the individual core revision numbers.
++ * For example, the "A0" silicon of each chip is chip rev 0.
++ * For PCMCIA we get it from the CIS instead.
++ */
++ if (si->bus == PCMCIA_BUS) {
++ ASSERT(vars);
++ si->chiprev = getintvar(*vars, "chiprev");
++ } else if (si->bus == PCI_BUS) {
++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
++ si->chiprev = w & 0xff;
++ } else
++ si->chiprev = 0;
+ }
+
-+done:
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
++ /* get chipcommon rev */
++ si->ccrev = cc? sb_corerev((void*)si) : 0;
++
++ /* determine numcores */
++ if ((si->ccrev == 4) || (si->ccrev >= 6))
++ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
++ else
++ si->numcores = sb_chip2numcores(si->chip);
+
-+ return ret;
-+}
++ /* return to original core */
++ sb_setcoreidx((void*)si, origidx);
+
++ /* sanity checks */
++ ASSERT(si->chip);
++ /* 4704A1 is chiprev 8 :-( */
++ ASSERT((si->chiprev < 8) ||
++ ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8))));
+
-+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
-+uint32
-+sb_memc_get_ncdl(void *sbh)
-+{
-+ sbmemcregs_t *memc;
-+ uint32 ret = 0;
-+ uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
-+ uint idx, rev;
++ /* scan for cores */
++ sb_scan(si);
+
-+ idx = sb_coreidx(sbh);
++ /* pci core is required */
++ if (!GOODIDX(si->pciidx)) {
++ SB_ERROR(("sb_attach: pci core not found\n"));
++ goto bad;
++ }
+
-+ memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
-+ if (memc == 0)
-+ goto out;
++ /* gpio control core is required */
++ if (!GOODIDX(si->gpioidx)) {
++ SB_ERROR(("sb_attach: gpio control core not found\n"));
++ goto bad;
++ }
+
-+ rev = sb_corerev(sbh);
++ /* get boardtype and boardrev */
++ switch (si->bus) {
++ case PCI_BUS:
++ /* do a pci config read to get subsystem id and subvendor id */
++ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
++ si->boardvendor = w & 0xffff;
++ si->boardtype = (w >> 16) & 0xffff;
++ break;
+
-+ config = R_REG(&memc->config);
-+ wr = R_REG(&memc->wrncdlcor);
-+ rd = R_REG(&memc->rdncdlcor);
-+ misc = R_REG(&memc->miscdlyctl);
-+ dqsg = R_REG(&memc->dqsgatencdl);
++ case PCMCIA_BUS:
++ case SDIO_BUS:
++ si->boardvendor = getintvar(*vars, "manfid");
++ si->boardtype = getintvar(*vars, "prodid");
++ break;
+
-+ rd &= MEMC_RDNCDLCOR_RD_MASK;
-+ wr &= MEMC_WRNCDLCOR_WR_MASK;
-+ dqsg &= MEMC_DQSGATENCDL_G_MASK;
++ case SB_BUS:
++ si->boardvendor = VENDOR_BROADCOM;
++ si->boardtype = 0xffff;
++ break;
++ }
+
-+ if (config & MEMC_CONFIG_DDR) {
-+ ret = (wr << 16) | (rd << 8) | dqsg;
-+ } else {
-+ if (rev > 0)
-+ cd = rd;
-+ else
-+ cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
-+ sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
-+ sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
-+ ret = (sm << 16) | (sd << 8) | cd;
++ if (si->boardtype == 0) {
++ SB_ERROR(("sb_attach: unknown board type\n"));
++ ASSERT(si->boardtype);
+ }
+
-+out:
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
++ return ((void*)si);
+
-+ return ret;
++bad:
++ MFREE(si, sizeof (sb_info_t));
++ return (NULL);
+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c 2005-08-28 11:12:20.479851704 +0200
-@@ -0,0 +1,530 @@
-+/*
-+ * Low-Level PCI and SB support for BCM47xx
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
-+ */
+
-+#include <typedefs.h>
-+#include <pcicfg.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <sbpci.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <bcmnvram.h>
-+#include <hndmips.h>
++uint
++sb_coreid(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
+
-+/* Can free sbpci_init() memory after boot */
-+#ifndef linux
-+#define __init
-+#endif
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+/* Emulated configuration space */
-+static pci_config_regs sb_config_regs[SB_MAXCORES];
++ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
++}
+
-+/* Banned cores */
-+static uint16 pci_ban[32] = { 0 };
-+static uint pci_banned = 0;
++uint
++sb_coreidx(void *sbh)
++{
++ sb_info_t *si;
+
-+/* CardBus mode */
-+static bool cardbus = FALSE;
++ si = SB_INFO(sbh);
++ return (si->curidx);
++}
+
-+/*
-+ * Functions for accessing external PCI configuration space
-+ */
++/* return current index of core */
++static uint
++_sb_coreidx(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint32 sbaddr = 0;
+
-+/* Assume one-hot slot wiring */
-+#define PCI_SLOT_MAX 16
++ si = SB_INFO(sbh);
++ ASSERT(si);
+
-+static uint32
-+config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
-+{
-+ uint coreidx;
-+ sbpciregs_t *regs;
-+ uint32 addr = 0;
++ switch (si->bus) {
++ case SB_BUS:
++ sb = REGS2SB(si->curmap);
++ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
++ break;
+
-+ /* CardBusMode supports only one device */
-+ if (cardbus && dev > 1)
-+ return 0;
++ case PCI_BUS:
++ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
++ break;
+
-+ coreidx = sb_coreidx(sbh);
-+ regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
++ case PCMCIA_BUS: {
++ uint8 tmp;
+
-+ /* Type 0 transaction */
-+ if (bus == 1) {
-+ /* Skip unwired slots */
-+ if (dev < PCI_SLOT_MAX) {
-+ /* Slide the PCI window to the appropriate slot */
-+ W_REG(®s->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
-+ addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
-+ (func << 8) | (off & ~3);
-+ }
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
++ sbaddr = (uint)tmp << 12;
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
++ sbaddr |= (uint)tmp << 16;
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++ sbaddr |= (uint)tmp << 24;
++ break;
+ }
-+
-+ /* Type 1 transaction */
-+ else {
-+ W_REG(®s->sbtopci1, SBTOPCI_CFG1);
-+ addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
++ default:
++ ASSERT(0);
+ }
+
-+ sb_setcoreidx(sbh, coreidx);
-+
-+ return addr;
++ ASSERT(GOODCOREADDR(sbaddr));
++ return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE);
+}
+
-+static int
-+extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++uint
++sb_corevendor(void *sbh)
+{
-+ uint32 addr, *reg = NULL, val;
-+ int ret = 0;
++ sb_info_t *si;
++ sbconfig_t *sb;
+
-+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+ !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+ BUSPROBE(val, reg))
-+ val = 0xffffffff;
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ val >>= 8 * (off & 3);
-+ if (len == 4)
-+ *((uint32 *) buf) = val;
-+ else if (len == 2)
-+ *((uint16 *) buf) = (uint16) val;
-+ else if (len == 1)
-+ *((uint8 *) buf) = (uint8) val;
-+ else
-+ ret = -1;
++ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
++}
+
-+ if (reg)
-+ REG_UNMAP(reg);
++uint
++sb_corerev(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
+
-+ return ret;
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
++
++ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
+}
+
-+static int
-+extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+ uint32 addr, *reg = NULL, val;
-+ int ret = 0;
++#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
+
-+ if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+ !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+ BUSPROBE(val, reg))
-+ goto done;
++/* set/clear sbtmstatelow core-specific flags */
++uint32
++sb_coreflags(void *sbh, uint32 mask, uint32 val)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint32 w;
+
-+ if (len == 4)
-+ val = *((uint32 *) buf);
-+ else if (len == 2) {
-+ val &= ~(0xffff << (8 * (off & 3)));
-+ val |= *((uint16 *) buf) << (8 * (off & 3));
-+ } else if (len == 1) {
-+ val &= ~(0xff << (8 * (off & 3)));
-+ val |= *((uint8 *) buf) << (8 * (off & 3));
-+ } else
-+ ret = -1;
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ W_REG(reg, val);
++ ASSERT((val & ~mask) == 0);
++ ASSERT((mask & ~SBTML_ALLOW) == 0);
+
-+ done:
-+ if (reg)
-+ REG_UNMAP(reg);
++ /* mask and set */
++ if (mask || val) {
++ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
++ W_SBREG(sbh, &sb->sbtmstatelow, w);
++ }
+
-+ return ret;
++ /* return the new value */
++ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
+}
+
-+/*
-+ * Functions for accessing translated SB configuration space
-+ */
-+
-+static int
-+sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++/* set/clear sbtmstatehigh core-specific flags */
++uint32
++sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
+{
-+ pci_config_regs *cfg;
++ sb_info_t *si;
++ sbconfig_t *sb;
++ uint32 w;
+
-+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+ return -1;
-+ cfg = &sb_config_regs[dev];
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ ASSERT(ISALIGNED(off, len));
-+ ASSERT(ISALIGNED(buf, len));
++ ASSERT((val & ~mask) == 0);
++ ASSERT((mask & ~SBTMH_FL_MASK) == 0);
+
-+ if (len == 4)
-+ *((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
-+ else if (len == 2)
-+ *((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
-+ else if (len == 1)
-+ *((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
-+ else
-+ return -1;
++ /* mask and set */
++ if (mask || val) {
++ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
++ W_SBREG(sbh, &sb->sbtmstatehigh, w);
++ }
+
-+ return 0;
++ /* return the new value */
++ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
+}
+
-+static int
-+sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++bool
++sb_iscoreup(void *sbh)
+{
-+ uint coreidx, n;
-+ void *regs;
++ sb_info_t *si;
+ sbconfig_t *sb;
-+ pci_config_regs *cfg;
+
-+ if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+ return -1;
-+ cfg = &sb_config_regs[dev];
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ ASSERT(ISALIGNED(off, len));
-+ ASSERT(ISALIGNED(buf, len));
++ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
++}
+
-+ /* Emulate BAR sizing */
-+ if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
-+ len == 4 && *((uint32 *) buf) == ~0) {
-+ coreidx = sb_coreidx(sbh);
-+ if ((regs = sb_setcoreidx(sbh, dev))) {
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+ /* Highest numbered address match register */
-+ n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
-+ if (off == OFFSETOF(pci_config_regs, base[0]))
-+ cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
-+ /*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
-+ cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
-+ else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
-+ cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
-+ else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
-+ cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/
++/*
++ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
++ * switch back to the original core, and return the new value.
++ */
++static uint
++sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
++{
++ sb_info_t *si;
++ uint origidx;
++ uint32 *r;
++ uint w;
++ uint intr_val = 0;
++
++ ASSERT(GOODIDX(coreidx));
++ ASSERT(regoff < SB_CORE_SIZE);
++ ASSERT((val & ~mask) == 0);
++
++ si = SB_INFO(sbh);
++
++ /* save current core index */
++ origidx = sb_coreidx(sbh);
++
++ /* switch core */
++ INTR_OFF(si, intr_val);
++ r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
++
++ /* mask and set */
++ if (mask || val) {
++ if (regoff >= SBCONFIGOFF) {
++ w = (R_SBREG(sbh, r) & ~mask) | val;
++ W_SBREG(sbh, r, w);
++ } else {
++ w = (R_REG(r) & ~mask) | val;
++ W_REG(r, w);
+ }
-+ sb_setcoreidx(sbh, coreidx);
-+ return 0;
+ }
+
-+ if (len == 4)
-+ *((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
-+ else if (len == 2)
-+ *((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
-+ else if (len == 1)
-+ *((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
-+ else
-+ return -1;
++ /* readback */
++ w = R_SBREG(sbh, r);
+
-+ return 0;
-+}
++ /* restore core index */
++ if (origidx != coreidx)
++ sb_setcoreidx(sbh, origidx);
+
-+int
-+sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+ if (bus == 0)
-+ return sb_read_config(sbh, bus, dev, func, off, buf, len);
-+ else
-+ return extpci_read_config(sbh, bus, dev, func, off, buf, len);
++ INTR_RESTORE(si, intr_val);
++ return (w);
+}
+
-+int
-+sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++/* scan the sb enumerated space to identify all cores */
++static void
++sb_scan(sb_info_t *si)
+{
-+ if (bus == 0)
-+ return sb_write_config(sbh, bus, dev, func, off, buf, len);
-+ else
-+ return extpci_write_config(sbh, bus, dev, func, off, buf, len);
-+}
++ void *sbh;
++ uint origidx;
++ uint i;
+
-+void
-+sbpci_ban(uint16 core)
-+{
-+ if (pci_banned < ARRAYSIZE(pci_ban))
-+ pci_ban[pci_banned++] = core;
-+}
++ sbh = (void*) si;
+
-+int __init
-+sbpci_init(void *sbh)
-+{
-+ uint chip, chiprev, chippkg, coreidx, host, i;
-+ sbpciregs_t *pci;
-+ sbconfig_t *sb;
-+ pci_config_regs *cfg;
-+ void *regs;
-+ char varname[8];
-+ uint wlidx = 0;
-+ uint16 vendor, core;
-+ uint8 class, subclass, progif;
-+ uint32 val;
-+ uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
-+ uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
++ /* numcores should already be set */
++ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
+
-+ chip = sb_chip(sbh);
-+ chiprev = sb_chiprev(sbh);
-+ chippkg = sb_chippkg(sbh);
-+ coreidx = sb_coreidx(sbh);
++ /* save current core index */
++ origidx = sb_coreidx(sbh);
+
-+ if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
-+ return -1;
-+ sb_core_reset(sbh, 0);
++ si->pciidx = si->gpioidx = BADIDX;
+
-+ if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ||
-+ ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID)))
-+ host = 0;
-+ else
-+ host = !BUSPROBE(val, &pci->control);
++ for (i = 0; i < si->numcores; i++) {
++ sb_setcoreidx(sbh, i);
++ si->coreid[i] = sb_coreid(sbh);
+
-+ if (!host) {
-+ /* Disable PCI interrupts in client mode */
-+ sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
-+ W_REG(&sb->sbintvec, 0);
++ if (si->coreid[i] == SB_CC)
++ si->ccrev = sb_corerev(sbh);
+
-+ /* Disable the PCI bridge in client mode */
-+ sbpci_ban(SB_PCI);
-+ printf("PCI: Disabled\n");
-+ } else {
-+ /* Reset the external PCI bus and enable the clock */
-+ W_REG(&pci->control, 0x5); /* enable the tristate drivers */
-+ W_REG(&pci->control, 0xd); /* enable the PCI clock */
-+ OSL_DELAY(100); /* delay 100 us */
-+ W_REG(&pci->control, 0xf); /* deassert PCI reset */
-+ W_REG(&pci->arbcontrol, PCI_INT_ARB); /* use internal arbiter */
-+ OSL_DELAY(1); /* delay 1 us */
++ else if (si->coreid[i] == SB_PCI) {
++ si->pciidx = i;
++ si->pcirev = sb_corerev(sbh);
+
-+ /* Enable CardBusMode */
-+ cardbus = nvram_match("cardbus", "1");
-+ if (cardbus) {
-+ printf("PCI: Enabling CardBus\n");
-+ /* GPIO 1 resets the CardBus device on bcm94710ap */
-+ sb_gpioout(sbh, 1, 1);
-+ sb_gpioouten(sbh, 1, 1);
-+ W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
++ }else if (si->coreid[i] == SB_PCMCIA){
++ si->pcmciaidx = i;
++ si->pcmciarev = sb_corerev(sbh);
+ }
++ }
+
-+ /* 64 MB I/O access window */
-+ W_REG(&pci->sbtopci0, SBTOPCI_IO);
-+ /* 64 MB configuration access window */
-+ W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
-+ /* 1 GB memory access window */
-+ W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
++ /*
++ * Find the gpio "controlling core" type and index.
++ * Precedence:
++ * - if there's a chip common core - use that
++ * - else if there's a pci core (rev >= 2) - use that
++ * - else there had better be an extif core (4710 only)
++ */
++ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
++ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
++ si->gpioid = SB_CC;
++ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
++ si->gpioidx = si->pciidx;
++ si->gpioid = SB_PCI;
++ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
++ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
++ si->gpioid = SB_EXTIF;
++ }
+
-+ /* Enable PCI bridge BAR0 prefetch and burst */
-+ val = 6;
-+ sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
++ /* return to original core index */
++ sb_setcoreidx(sbh, origidx);
++}
+
-+ /* Enable PCI interrupts */
-+ W_REG(&pci->intmask, PCI_INTA);
-+ }
++/* may be called with core in reset */
++void
++sb_detach(void *sbh)
++{
++ sb_info_t *si;
++ uint idx;
+
-+ /* Scan the SB bus */
-+ bzero(sb_config_regs, sizeof(sb_config_regs));
-+ for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
-+ cfg->vendor = 0xffff;
-+ if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
-+ continue;
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++ si = SB_INFO(sbh);
+
-+ /* Read ID register and parse vendor and core */
-+ val = R_REG(&sb->sbidhigh);
-+ vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
-+ core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
-+ progif = 0;
++ if (si == NULL)
++ return;
+
-+ /* Check if this core is banned */
-+ for (i = 0; i < pci_banned; i++)
-+ if (core == pci_ban[i])
-+ break;
-+ if (i < pci_banned)
-+ continue;
++ if (si->bus == SB_BUS)
++ for (idx = 0; idx < SB_MAXCORES; idx++)
++ if (si->regs[idx]) {
++ REG_UNMAP(si->regs[idx]);
++ si->regs[idx] = NULL;
++ }
+
-+ /* Known vendor translations */
-+ switch (vendor) {
-+ case SB_VEND_BCM:
-+ vendor = VENDOR_BROADCOM;
-+ break;
-+ }
++ MFREE(si, sizeof (sb_info_t));
++}
+
-+ /* Determine class based on known core codes */
-+ switch (core) {
-+ case SB_ILINE20:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_ETHER;
-+ core = BCM47XX_ILINE_ID;
-+ break;
-+ case SB_ILINE100:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_ETHER;
-+ core = BCM4610_ILINE_ID;
-+ break;
-+ case SB_ENET:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_ETHER;
-+ core = BCM47XX_ENET_ID;
-+ break;
-+ case SB_SDRAM:
-+ case SB_MEMC:
-+ class = PCI_CLASS_MEMORY;
-+ subclass = PCI_MEMORY_RAM;
-+ break;
-+ case SB_PCI:
-+ class = PCI_CLASS_BRIDGE;
-+ subclass = PCI_BRIDGE_PCI;
-+ //break;
-+ case SB_MIPS:
-+ case SB_MIPS33:
-+ class = PCI_CLASS_CPU;
-+ subclass = PCI_CPU_MIPS;
-+ break;
-+ case SB_CODEC:
-+ class = PCI_CLASS_COMM;
-+ subclass = PCI_COMM_MODEM;
-+ core = BCM47XX_V90_ID;
-+ break;
-+ case SB_USB:
-+ class = PCI_CLASS_SERIAL;
-+ subclass = PCI_SERIAL_USB;
-+ progif = 0x10; /* OHCI */
-+ core = BCM47XX_USB_ID;
-+ break;
-+ case SB_USB11H:
-+ class = PCI_CLASS_SERIAL;
-+ subclass = PCI_SERIAL_USB;
-+ progif = 0x10; /* OHCI */
-+ core = BCM47XX_USBH_ID;
-+ break;
-+ case SB_USB11D:
-+ class = PCI_CLASS_SERIAL;
-+ subclass = PCI_SERIAL_USB;
-+ core = BCM47XX_USBD_ID;
-+ break;
-+ case SB_IPSEC:
-+ class = PCI_CLASS_CRYPT;
-+ subclass = PCI_CRYPT_NETWORK;
-+ core = BCM47XX_IPSEC_ID;
-+ break;
-+ case SB_EXTIF:
-+ case SB_CC:
-+ class = PCI_CLASS_MEMORY;
-+ subclass = PCI_MEMORY_FLASH;
-+ break;
-+ case SB_D11:
-+ class = PCI_CLASS_NET;
-+ subclass = PCI_NET_OTHER;
-+ /* Let an nvram variable override this */
-+ sprintf(varname, "wl%did", wlidx);
-+ wlidx++;
-+ if ((core = getintvar(NULL, varname)) == 0) {
-+ if (chip == BCM4712_DEVICE_ID) {
-+ if (chippkg == BCM4712SMALL_PKG_ID)
-+ core = BCM4306_D11G_ID;
-+ else
-+ core = BCM4306_D11DUAL_ID;
-+ } else {
-+ /* 4310 */
-+ core = BCM4310_D11B_ID;
-+ }
-+ }
-+ break;
++/* use pci dev id to determine chip id for chips not having a chipcommon core */
++static uint
++sb_pcidev2chip(uint pcidev)
++{
++ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
++ return (BCM4710_DEVICE_ID);
++ if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID))
++ return (BCM4610_DEVICE_ID);
++ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
++ return (BCM4402_DEVICE_ID);
++ if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
++ return (BCM4307_DEVICE_ID);
++ if (pcidev == BCM4301_DEVICE_ID)
++ return (BCM4301_DEVICE_ID);
+
-+ default:
-+ class = subclass = progif = 0xff;
-+ break;
-+ }
++ return (0);
++}
+
-+ /* Supported translations */
-+ cfg->vendor = htol16(vendor);
-+ cfg->device = htol16(core);
-+ cfg->rev_id = chiprev;
-+ cfg->prog_if = progif;
-+ cfg->sub_class = subclass;
-+ cfg->base_class = class;
-+ cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
-+ cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/;
-+ cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/;
-+ cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/;
-+ cfg->base[4] = 0;
-+ cfg->base[5] = 0;
-+ if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
-+ cfg->header_type = PCI_HEADER_BRIDGE;
-+ else
-+ cfg->header_type = PCI_HEADER_NORMAL;
-+ /* Save core interrupt flag */
-+ cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
-+ /* Default to MIPS shared interrupt 0 */
-+ cfg->int_line = 0;
-+ /* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
-+ if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+ (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+ sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+ val = R_REG(&sb->sbipsflag);
-+ for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
-+ if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
-+ break;
-+ }
-+ if (cfg->int_line > 4)
-+ cfg->int_line = 0;
-+ }
-+ /* Emulated core */
-+ *((uint32 *) &cfg->sprom_control) = 0xffffffff;
-+ }
++/* convert chip number to number of i/o cores */
++static uint
++sb_chip2numcores(uint chip)
++{
++ if (chip == 0x4710)
++ return (9);
++ if (chip == 0x4610)
++ return (9);
++ if (chip == 0x4402)
++ return (3);
++ if ((chip == 0x4307) || (chip == 0x4301))
++ return (5);
++ if (chip == 0x4310)
++ return (8);
++ if (chip == 0x4306) /* < 4306c0 */
++ return (6);
++ if (chip == 0x4704)
++ return (9);
++ if (chip == 0x5365)
++ return (7);
+
-+ sb_setcoreidx(sbh, coreidx);
-+ return 0;
++ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
++ ASSERT(0);
++ return (1);
+}
+
-+void
-+sbpci_check(void *sbh)
++/* return index of coreid or BADIDX if not found */
++static uint
++sb_findcoreidx(void *sbh, uint coreid, uint coreunit)
+{
-+ uint coreidx;
-+ sbpciregs_t *pci;
-+ uint32 sbtopci1;
-+ uint32 buf[64], *ptr, i;
-+ ulong pa;
-+ volatile uint j;
++ sb_info_t *si;
++ uint found;
++ uint i;
+
-+ coreidx = sb_coreidx(sbh);
-+ pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
++ si = SB_INFO(sbh);
++ found = 0;
+
-+ /* Clear the test array */
-+ pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
-+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
-+ memset(ptr, 0, sizeof(buf));
++ for (i = 0; i < si->numcores; i++)
++ if (si->coreid[i] == coreid) {
++ if (found == coreunit)
++ return (i);
++ found++;
++ }
+
-+ /* Point PCI window 1 to memory */
-+ sbtopci1 = R_REG(&pci->sbtopci1);
-+ W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));
++ return (BADIDX);
++}
+
-+ /* Fill the test array via PCI window 1 */
-+ ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
-+ for (i = 0; i < ARRAYSIZE(buf); i++) {
-+ for (j = 0; j < 2; j++);
-+ W_REG(&ptr[i], i);
-+ }
-+ REG_UNMAP(ptr);
++/* change logical "focus" to the indiciated core */
++void*
++sb_setcoreidx(void *sbh, uint coreidx)
++{
++ sb_info_t *si;
++ uint32 sbaddr;
++ uint8 tmp;
+
-+ /* Restore PCI window 1 */
-+ W_REG(&pci->sbtopci1, sbtopci1);
++ si = SB_INFO(sbh);
+
-+ /* Check the test array */
-+ DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
-+ ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
-+ for (i = 0; i < ARRAYSIZE(buf); i++) {
-+ if (ptr[i] != i)
-+ break;
-+ }
++ if (coreidx >= si->numcores)
++ return (NULL);
+
-+ /* Change the clock if the test fails */
-+ if (i < ARRAYSIZE(buf)) {
-+ uint32 req, cur;
++ /*
++ * If the user has provided an interrupt mask enabled function,
++ * then assert interrupts are disabled before switching the core.
++ */
++ ASSERT((si->imf == NULL) || !(*si->imf)(si->imfarg));
+
-+ cur = sb_clock(sbh);
-+ printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
-+ for (req = 104000000; req < 176000000; req += 4000000) {
-+ printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
-+ /* This will only reset if the clocks are valid and have changed */
-+ sb_mips_setclock(sbh, req, 0, 0);
++ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
++
++ switch (si->bus) {
++ case SB_BUS:
++ /* map new one */
++ if (!si->regs[coreidx]) {
++ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
++ ASSERT(GOODREGS(si->regs[coreidx]));
+ }
-+ /* Should not reach here */
-+ ASSERT(0);
++ si->curmap = si->regs[coreidx];
++ break;
++
++ case PCI_BUS:
++ /* point bar0 window */
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
++ break;
++
++ case PCMCIA_BUS:
++ tmp = (sbaddr >> 12) & 0x0f;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
++ tmp = (sbaddr >> 16) & 0xff;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
++ tmp = (sbaddr >> 24) & 0xff;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++ break;
+ }
+
-+ sb_setcoreidx(sbh, coreidx);
++ si->curidx = coreidx;
++
++ return (si->curmap);
+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c 2005-08-28 11:12:20.482851248 +0200
-@@ -0,0 +1,1895 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of the SiliconBackplane-based Broadcom chips.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbpci.h>
-+#include <pcicfg.h>
-+#include <sbpcmcia.h>
-+#include <sbextif.h>
-+#include <sbutils.h>
-+#include <bcmsrom.h>
-+
-+/* debug/trace */
-+#define SB_ERROR(args)
-+
-+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
-+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
-+
-+/* misc sb info needed by some of the routines */
-+typedef struct sb_info {
-+ uint chip; /* chip number */
-+ uint chiprev; /* chip revision */
-+ uint chippkg; /* chip package option */
-+ uint boardtype; /* board type */
-+ uint boardvendor; /* board vendor id */
-+ uint bus; /* what bus type we are going through */
-+
-+ void *osh; /* osl os handle */
-+ void *sdh; /* bcmsdh handle */
-+
-+ void *curmap; /* current regs va */
-+ void *regs[SB_MAXCORES]; /* other regs va */
-+
-+ uint curidx; /* current core index */
-+ uint dev_coreid; /* the core provides driver functions */
-+ uint pciidx; /* pci core index */
-+ uint pcirev; /* pci core rev */
-+
-+ uint pcmciaidx; /* pcmcia core index */
-+ uint pcmciarev; /* pcmcia core rev */
-+ bool memseg; /* flag to toggle MEM_SEG register */
++/* change logical "focus" to the indicated core */
++void*
++sb_setcore(void *sbh, uint coreid, uint coreunit)
++{
++ sb_info_t *si;
++ uint idx;
+
-+ uint ccrev; /* chipc core rev */
++ si = SB_INFO(sbh);
+
-+ uint gpioidx; /* gpio control core index */
-+ uint gpioid; /* gpio control coretype */
++ idx = sb_findcoreidx(sbh, coreid, coreunit);
++ if (!GOODIDX(idx))
++ return (NULL);
+
-+ uint numcores; /* # discovered cores */
-+ uint coreid[SB_MAXCORES]; /* id of each core */
++ return (sb_setcoreidx(sbh, idx));
++}
+
-+ void *intr_arg; /* interrupt callback function arg */
-+ sb_intrsoff_t intrsoff_fn; /* function turns chip interrupts off */
-+ sb_intrsrestore_t intrsrestore_fn; /* function restore chip interrupts */
-+} sb_info_t;
++/* return chip number */
++uint
++sb_chip(void *sbh)
++{
++ sb_info_t *si;
+
-+/* local prototypes */
-+static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
-+static void sb_scan(sb_info_t *si);
-+static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
-+static uint _sb_coreidx(void *sbh);
-+static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
-+static uint sb_pcidev2chip(uint pcidev);
-+static uint sb_chip2numcores(uint chip);
++ si = SB_INFO(sbh);
++ return (si->chip);
++}
+
-+#define SB_INFO(sbh) (sb_info_t*)sbh
-+#define SET_SBREG(sbh, r, mask, val) W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
-+#define GOODCOREADDR(x) (((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \
-+ && ISALIGNED((x), SB_CORE_SIZE))
-+#define GOODREGS(regs) (regs && ISALIGNED(regs, SB_CORE_SIZE))
-+#define REGS2SB(va) (sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
-+#define GOODIDX(idx) (((uint)idx) < SB_MAXCORES)
-+#define BADIDX (SB_MAXCORES+1)
++/* return chip revision number */
++uint
++sb_chiprev(void *sbh)
++{
++ sb_info_t *si;
+
-+#define R_SBREG(sbh, sbr) sb_read_sbreg((sbh), (sbr))
-+#define W_SBREG(sbh, sbr, v) sb_write_sbreg((sbh), (sbr), (v))
-+#define AND_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
-+#define OR_SBREG(sbh, sbr, v) W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
++ si = SB_INFO(sbh);
++ return (si->chiprev);
++}
+
-+/*
-+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
-+ * after core switching to avoid invalid register accesss inside ISR.
-+ */
-+#define INTR_OFF(si, intr_val) \
-+ if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
-+ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
-+#define INTR_RESTORE(si, intr_val) \
-+ if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) { \
-+ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
++/* return chip package option */
++uint
++sb_chippkg(void *sbh)
++{
++ sb_info_t *si;
+
-+/* power control defines */
-+#define PLL_DELAY 150 /* 150us pll on delay */
-+#define FREF_DELAY 15 /* 15us fref change delay */
-+#define LPOMINFREQ 25000 /* low power oscillator min */
-+#define LPOMAXFREQ 43000 /* low power oscillator max */
-+#define XTALMINFREQ 19800000 /* 20mhz - 1% */
-+#define XTALMAXFREQ 20200000 /* 20mhz + 1% */
-+#define PCIMINFREQ 25000000 /* 25mhz */
-+#define PCIMAXFREQ 34000000 /* 33mhz + fudge */
++ si = SB_INFO(sbh);
++ return (si->chippkg);
++}
+
-+#define SCC_LOW2FAST_LIMIT 5000 /* turn on fast clock time, in unit of ms */
++/* return board vendor id */
++uint
++sb_boardvendor(void *sbh)
++{
++ sb_info_t *si;
+
++ si = SB_INFO(sbh);
++ return (si->boardvendor);
++}
+
-+static uint32
-+sb_read_sbreg(void *sbh, volatile uint32 *sbr)
++/* return boardtype */
++uint
++sb_boardtype(void *sbh)
+{
+ sb_info_t *si;
-+ uint8 tmp;
-+ uint32 val, intr_val = 0;
++ char *var;
+
+ si = SB_INFO(sbh);
+
-+ /*
-+ * compact flash only has 11 bits address, while we needs 12 bits address.
-+ * MEM_SEG will be OR'd with other 11 bits address in hardware,
-+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
-+ */
-+ if(si->memseg) {
-+ INTR_OFF(si, intr_val);
-+ tmp = 1;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11*/
-+ }
++ if (si->bus == SB_BUS && si->boardtype == 0xffff) {
++ /* boardtype format is a hex string */
++ si->boardtype = getintvar(NULL, "boardtype");
+
-+ val = R_REG(sbr);
-+
-+ if(si->memseg) {
-+ tmp = 0;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ INTR_RESTORE(si, intr_val);
++ /* backward compatibility for older boardtype string format */
++ if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
++ if (!strcmp(var, "bcm94710dev"))
++ si->boardtype = BCM94710D_BOARD;
++ else if (!strcmp(var, "bcm94710ap"))
++ si->boardtype = BCM94710AP_BOARD;
++ else if (!strcmp(var, "bcm94310u"))
++ si->boardtype = BCM94310U_BOARD;
++ else if (!strcmp(var, "bu4711"))
++ si->boardtype = BU4711_BOARD;
++ else if (!strcmp(var, "bu4710"))
++ si->boardtype = BU4710_BOARD;
++ else if (!strcmp(var, "bcm94702mn"))
++ si->boardtype = BCM94702MN_BOARD;
++ else if (!strcmp(var, "bcm94710r1"))
++ si->boardtype = BCM94710R1_BOARD;
++ else if (!strcmp(var, "bcm94710r4"))
++ si->boardtype = BCM94710R4_BOARD;
++ else if (!strcmp(var, "bcm94702cpci"))
++ si->boardtype = BCM94702CPCI_BOARD;
++ else if (!strcmp(var, "bcm95380_rr"))
++ si->boardtype = BCM95380RR_BOARD;
++ }
+ }
+
-+ return (val);
++ return (si->boardtype);
+}
+
-+static void
-+sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
++/* return board bus style */
++uint
++sb_boardstyle(void *sbh)
+{
+ sb_info_t *si;
-+ uint8 tmp;
-+ volatile uint32 dummy;
-+ uint32 intr_val = 0;
++ uint16 w;
+
+ si = SB_INFO(sbh);
+
-+ /*
-+ * compact flash only has 11 bits address, while we needs 12 bits address.
-+ * MEM_SEG will be OR'd with other 11 bits address in hardware,
-+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
-+ */
-+ if(si->memseg) {
-+ INTR_OFF(si, intr_val);
-+ tmp = 1;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ (uint32)sbr &= ~(1 << 11); /* mask out bit 11 */
-+ }
++ if (si->bus == PCMCIA_BUS)
++ return (BOARDSTYLE_PCMCIA);
+
-+ if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) {
-+#ifdef IL_BIGENDIAN
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+#else
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+ dummy = R_REG(sbr);
-+ W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
-+#endif
-+ } else
-+ W_REG(sbr, v);
++ if (si->bus == SB_BUS)
++ return (BOARDSTYLE_SOC);
+
-+ if(si->memseg) {
-+ tmp = 0;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+ INTR_RESTORE(si, intr_val);
-+ }
++ /* bus is PCI */
++
++ if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0)
++ return (BOARDSTYLE_CARDBUS);
++
++ if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) &&
++ (w == 0x0313))
++ return (BOARDSTYLE_CARDBUS);
++
++ return (BOARDSTYLE_PCI);
+}
+
-+/*
-+ * Allocate a sb handle.
-+ * devid - pci device id (used to determine chip#)
-+ * osh - opaque OS handle
-+ * regs - virtual address of initial core registers
-+ * bustype - pci/pcmcia/sb/sdio/etc
-+ * vars - pointer to a pointer area for "environment" variables
-+ * varsz - pointer to int to return the size of the vars
-+ */
-+void*
-+sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++/* return boolean if sbh device is in pci hostmode or client mode */
++uint
++sb_bus(void *sbh)
+{
+ sb_info_t *si;
+
-+ /* alloc sb_info_t */
-+ if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
-+ SB_ERROR(("sb_attach: malloc failed!\n"));
-+ return (NULL);
-+ }
++ si = SB_INFO(sbh);
++ return (si->bus);
++}
+
-+ return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
++/* return list of found cores */
++uint
++sb_corelist(void *sbh, uint coreid[])
++{
++ sb_info_t *si;
++
++ si = SB_INFO(sbh);
++
++ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
++ return (si->numcores);
+}
+
-+/* global kernel resource */
-+static sb_info_t ksi;
++/* return current register mapping */
++void *
++sb_coreregs(void *sbh)
++{
++ sb_info_t *si;
+
-+/* generic kernel variant of sb_attach() */
-+void*
-+sb_kattach()
++ si = SB_INFO(sbh);
++ ASSERT(GOODREGS(si->curmap));
++
++ return (si->curmap);
++}
++
++/* Check if a target abort has happened and clear it */
++bool
++sb_taclear(void *sbh)
+{
-+ uint32 *regs;
-+ char *unused;
-+ int varsz;
++ sb_info_t *si;
++ bool rc = FALSE;
++ sbconfig_t *sb;
+
-+ if (ksi.curmap == NULL) {
-+ uint32 cid;
-+ regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
-+ cid = R_REG((uint32 *)regs);
-+ if ((cid == 0x08104712) || (cid == 0x08114712)) {
-+ uint32 *scc, val;
++ si = SB_INFO(sbh);
++ sb = REGS2SB(si->curmap);
+
-+ scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
-+ val = R_REG(scc);
-+ SB_ERROR((" initial scc = 0x%x\n", val));
-+ val |= SCC_SS_XTAL;
-+ W_REG(scc, val);
-+ }
++ if (si->bus == PCI_BUS) {
++ uint32 stcmd;
+
-+ sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
-+ SB_BUS, NULL, &unused, &varsz);
++ stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd));
++ rc = (stcmd & 0x08000000) != 0;
++
++ if (rc) {
++ /* Target abort bit is set, clear it */
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd), stcmd);
++ }
++ } else if (si->bus == PCMCIA_BUS) {
++ rc = FALSE;
++ }
++ else if (si->bus == SDIO_BUS) {
++ /* due to 4317 A0 HW bug, sdio core wedged on target abort,
++ just clear SBSErr bit blindly */
++ if (0x0 != R_SBREG(sbh, &sb->sbtmerrlog)) {
++ SB_ERROR(("SDIO target abort, clean it"));
++ W_SBREG(sbh, &sb->sbtmstatehigh, 0);
++ }
++ rc = FALSE;
+ }
+
-+ return &ksi;
++ return (rc);
+}
+
-+static void*
-+sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++/* do buffered registers update */
++void
++sb_commit(void *sbh)
+{
++ sb_info_t *si;
++ sbpciregs_t *pciregs;
+ uint origidx;
-+ chipcregs_t *cc;
-+ uint32 w;
++ uint intr_val = 0;
+
-+ ASSERT(GOODREGS(regs));
++ si = SB_INFO(sbh);
+
-+ bzero((uchar*)si, sizeof (sb_info_t));
++ origidx = si->curidx;
++ ASSERT(GOODIDX(origidx));
+
-+ si->pciidx = si->gpioidx = BADIDX;
++ INTR_OFF(si, intr_val);
++ /* switch over to pci core */
++ pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0);
+
-+ si->osh = osh;
-+ si->curmap = regs;
-+ si->sdh = sdh;
++ /* do the buffer registers update */
++ W_REG(&pciregs->bcastaddr, SB_COMMIT);
++ W_REG(&pciregs->bcastdata, 0x0);
+
-+ /* 4317A0 PCMCIA is no longer supported */
-+ if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317))
-+ return NULL;
++ /* restore core index */
++ sb_setcoreidx(sbh, origidx);
++ INTR_RESTORE(si, intr_val);
++}
+
-+ /* check to see if we are a sb core mimic'ing a pci core */
-+ if (bustype == PCI_BUS) {
-+ if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
-+ bustype = SB_BUS;
-+ else
-+ bustype = PCI_BUS;
-+ }
++/* reset and re-enable a core */
++void
++sb_core_reset(void *sbh, uint32 bits)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
++ volatile uint32 dummy;
+
-+ si->bus = bustype;
++ si = SB_INFO(sbh);
++ ASSERT(GOODREGS(si->curmap));
++ sb = REGS2SB(si->curmap);
+
-+ /* kludge to enable the clock on the 4306 which lacks a slowclock */
-+ if (si->bus == PCI_BUS)
-+ sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
++ /*
++ * Must do the disable sequence first to work for arbitrary current core state.
++ */
++ sb_core_disable(sbh, bits);
+
-+ /* clear any previous epidiag-induced target abort */
-+ sb_taclear((void*)si);
++ /*
++ * Now do the initialization sequence.
++ */
+
-+ /* initialize current core index value */
-+ si->curidx = _sb_coreidx((void*)si);
++ /* set reset while enabling the clock and forcing them on throughout the core */
++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
++ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
+
-+ /* keep and reuse the initial register mapping */
-+ origidx = si->curidx;
-+ if (si->bus == SB_BUS)
-+ si->regs[origidx] = regs;
++ if (sb_coreid(sbh) == SB_ILINE100) {
++ bcm_mdelay(50);
++ } else {
++ OSL_DELAY(1);
++ }
+
-+ /* initialize the vars */
-+ if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) {
-+ SB_ERROR(("sb_attach: srom_var_init failed\n"));
-+ goto bad;
++ if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) {
++ W_SBREG(sbh, &sb->sbtmstatehigh, 0);
+ }
-+
-+ if (si->bus == PCMCIA_BUS) {
-+ w = getintvar(*vars, "regwindowsz");
-+ si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
++ if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
++ AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
+ }
+
-+ /* is core-0 a chipcommon core? */
-+ si->numcores = 1;
-+ cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
-+ if (sb_coreid((void*)si) != SB_CC)
-+ cc = NULL;
-+
-+ /* determine chip id and rev */
-+ if (cc) {
-+ /* chip common core found! */
-+ si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
-+ si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
-+ si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
-+ } else {
-+ /* without chip common core, get devid for PCMCIA */
-+ if (si->bus == PCMCIA_BUS)
-+ devid = getintvar(*vars, "devid");
-+
-+ /* no chip common core -- must convert device id to chip id */
-+ if ((si->chip = sb_pcidev2chip(devid)) == 0) {
-+ SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
-+ goto bad;
-+ }
++ /* clear reset and allow it to propagate throughout the core */
++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
++ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ OSL_DELAY(1);
+
-+ /*
-+ * The chip revision number is hardwired into all
-+ * of the pci function config rev fields and is
-+ * independent from the individual core revision numbers.
-+ * For example, the "A0" silicon of each chip is chip rev 0.
-+ * For PCMCIA we get it from the CIS instead.
-+ */
-+ if (si->bus == PCMCIA_BUS) {
-+ ASSERT(vars);
-+ si->chiprev = getintvar(*vars, "chiprev");
-+ } else if (si->bus == PCI_BUS) {
-+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
-+ si->chiprev = w & 0xff;
-+ } else
-+ si->chiprev = 0;
-+ }
++ /* leave clock enabled */
++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits));
++ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ OSL_DELAY(1);
++}
+
-+ /* get chipcommon rev */
-+ si->ccrev = cc? sb_corerev((void*)si) : 0;
-+
-+ /* determine numcores */
-+ if ((si->ccrev == 4) || (si->ccrev >= 6))
-+ si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
-+ else
-+ si->numcores = sb_chip2numcores(si->chip);
++void
++sb_core_tofixup(void *sbh)
++{
++ sb_info_t *si;
++ sbconfig_t *sb;
+
-+ /* return to original core */
-+ sb_setcoreidx((void*)si, origidx);
++ si = SB_INFO(sbh);
+
-+ /* sanity checks */
-+ ASSERT(si->chip);
-+ /* 4704A1 is chiprev 8 :-( */
-+ ASSERT((si->chiprev < 8) ||
-+ ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8))));
++ if (si->pcirev >= 5)
++ return;
+
-+ /* scan for cores */
-+ sb_scan(si);
++ ASSERT(GOODREGS(si->curmap));
++ sb = REGS2SB(si->curmap);
+
-+ /* pci core is required */
-+ if (!GOODIDX(si->pciidx)) {
-+ SB_ERROR(("sb_attach: pci core not found\n"));
-+ goto bad;
++ if (si->bus == SB_BUS) {
++ SET_SBREG(sbh, &sb->sbimconfiglow,
++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++ (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
++ } else {
++ if (sb_coreid(sbh) == SB_PCI) {
++ SET_SBREG(sbh, &sb->sbimconfiglow,
++ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
++ } else {
++ SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
++ }
+ }
+
-+ /* gpio control core is required */
-+ if (!GOODIDX(si->gpioidx)) {
-+ SB_ERROR(("sb_attach: gpio control core not found\n"));
-+ goto bad;
-+ }
-+
-+ /* get boardtype and boardrev */
-+ switch (si->bus) {
-+ case PCI_BUS:
-+ /* do a pci config read to get subsystem id and subvendor id */
-+ w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
-+ si->boardvendor = w & 0xffff;
-+ si->boardtype = (w >> 16) & 0xffff;
-+ break;
-+
-+ case PCMCIA_BUS:
-+ case SDIO_BUS:
-+ si->boardvendor = getintvar(*vars, "manfid");
-+ si->boardtype = getintvar(*vars, "prodid");
-+ break;
-+
-+ case SB_BUS:
-+ si->boardvendor = VENDOR_BROADCOM;
-+ si->boardtype = 0xffff;
-+ break;
-+ }
-+
-+ if (si->boardtype == 0) {
-+ SB_ERROR(("sb_attach: unknown board type\n"));
-+ ASSERT(si->boardtype);
-+ }
-+
-+ return ((void*)si);
-+
-+bad:
-+ MFREE(si, sizeof (sb_info_t));
-+ return (NULL);
++ sb_commit(sbh);
+}
+
-+uint
-+sb_coreid(void *sbh)
++void
++sb_core_disable(void *sbh, uint32 bits)
+{
+ sb_info_t *si;
++ volatile uint32 dummy;
+ sbconfig_t *sb;
+
+ si = SB_INFO(sbh);
++
++ ASSERT(GOODREGS(si->curmap));
+ sb = REGS2SB(si->curmap);
+
-+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
-+}
++ /* must return if core is already in reset */
++ if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET)
++ return;
+
-+uint
-+sb_coreidx(void *sbh)
-+{
-+ sb_info_t *si;
++ /* put into reset and return if clocks are not enabled */
++ if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0)
++ goto disable;
+
-+ si = SB_INFO(sbh);
-+ return (si->curidx);
-+}
++ /* set the reject bit */
++ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ));
+
-+/* return current index of core */
-+static uint
-+_sb_coreidx(void *sbh)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ uint32 sbaddr = 0;
++ /* spin until reject is set */
++ while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0)
++ OSL_DELAY(1);
+
-+ si = SB_INFO(sbh);
-+ ASSERT(si);
++ /* spin until sbtmstatehigh.busy is clear */
++ while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY)
++ OSL_DELAY(1);
+
-+ switch (si->bus) {
-+ case SB_BUS:
-+ sb = REGS2SB(si->curmap);
-+ sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
-+ break;
++ /* set reset and reject while enabling the clocks */
++ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET));
++ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ OSL_DELAY(10);
+
-+ case PCI_BUS:
-+ sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
-+ break;
++ disable:
++ /* leave reset and reject asserted */
++ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET));
++ OSL_DELAY(1);
++}
+
-+ case PCMCIA_BUS: {
-+ uint8 tmp;
++void
++sb_watchdog(void *sbh, uint ticks)
++{
++ sb_info_t *si = SB_INFO(sbh);
+
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
-+ sbaddr = (uint)tmp << 12;
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
-+ sbaddr |= (uint)tmp << 16;
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
-+ sbaddr |= (uint)tmp << 24;
++ /* instant NMI */
++ switch (si->gpioid) {
++ case SB_CC:
++ sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
++ break;
++ case SB_EXTIF:
++ sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
+ break;
+ }
-+ default:
-+ ASSERT(0);
-+ }
-+
-+ ASSERT(GOODCOREADDR(sbaddr));
-+ return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE);
+}
+
-+uint
-+sb_corevendor(void *sbh)
++/* initialize the pcmcia core */
++void
++sb_pcmcia_init(void *sbh)
+{
+ sb_info_t *si;
-+ sbconfig_t *sb;
++ uint8 cor;
+
+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
+
-+ return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
++ /* enable d11 mac interrupts */
++ if (si->chip == BCM4301_DEVICE_ID) {
++ /* Have to use FCR2 in 4301 */
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
++ cor |= COR_IRQEN | COR_FUNEN;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
++ } else {
++ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
++ cor |= COR_IRQEN | COR_FUNEN;
++ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
++ }
++
+}
+
-+uint
-+sb_corerev(void *sbh)
++
++/*
++ * Configure the pci core for pci client (NIC) action
++ * and get appropriate dma offset value.
++ * coremask is the bitvec of cores by index to be enabled.
++ */
++void
++sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask)
+{
+ sb_info_t *si;
+ sbconfig_t *sb;
++ sbpciregs_t *pciregs;
++ uint32 sbflag;
++ uint32 w;
++ uint idx;
+
+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
+
-+ return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
-+}
++ if (dmaoffset)
++ *dmaoffset = 0;
+
-+#define SBTML_ALLOW (SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
++ /* if not pci bus, we're done */
++ if (si->bus != PCI_BUS)
++ return;
+
-+/* set/clear sbtmstatelow core-specific flags */
-+uint32
-+sb_coreflags(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ uint32 w;
++ ASSERT(si->pciidx);
+
-+ si = SB_INFO(sbh);
++ /* get current core index */
++ idx = si->curidx;
++
++ /* we interrupt on this backplane flag number */
++ ASSERT(GOODREGS(si->curmap));
+ sb = REGS2SB(si->curmap);
++ sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
+
-+ ASSERT((val & ~mask) == 0);
-+ ASSERT((mask & ~SBTML_ALLOW) == 0);
++ /* switch over to pci core */
++ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx);
++ sb = REGS2SB(pciregs);
+
-+ /* mask and set */
-+ if (mask || val) {
-+ w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
-+ W_SBREG(sbh, &sb->sbtmstatelow, w);
++ /*
++ * Enable sb->pci interrupts. Assume
++ * PCI rev 2.3 support was added in pci core rev 6 and things changed..
++ */
++ if (si->pcirev < 6) {
++ /* set sbintvec bit for our flag number */
++ OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag));
++ } else {
++ /* pci config write to set this core bit in PCIIntMask */
++ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
++ w |= (coremask << PCI_SBIM_SHIFT);
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
+ }
+
-+ /* return the new value */
-+ return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
++ /* enable prefetch and bursts for sonics-to-pci translation 2 */
++ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
++
++ if (si->pcirev < 5) {
++ SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
++ sb_commit(sbh);
++ }
++
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ /* use large sb pci dma window */
++ if (dmaoffset)
++ *dmaoffset = SB_PCI_DMA;
+}
+
-+/* set/clear sbtmstatehigh core-specific flags */
+uint32
-+sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
++sb_base(uint32 admatch)
+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ uint32 w;
++ uint32 base;
++ uint type;
+
-+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
++ type = admatch & SBAM_TYPE_MASK;
++ ASSERT(type < 3);
+
-+ ASSERT((val & ~mask) == 0);
-+ ASSERT((mask & ~SBTMH_FL_MASK) == 0);
++ base = 0;
+
-+ /* mask and set */
-+ if (mask || val) {
-+ w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
-+ W_SBREG(sbh, &sb->sbtmstatehigh, w);
++ if (type == 0) {
++ base = admatch & SBAM_BASE0_MASK;
++ } else if (type == 1) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ base = admatch & SBAM_BASE1_MASK;
++ } else if (type == 2) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ base = admatch & SBAM_BASE2_MASK;
+ }
+
-+ /* return the new value */
-+ return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
++ return (base);
+}
+
-+bool
-+sb_iscoreup(void *sbh)
++uint32
++sb_size(uint32 admatch)
+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
++ uint32 size;
++ uint type;
+
-+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
++ type = admatch & SBAM_TYPE_MASK;
++ ASSERT(type < 3);
+
-+ return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
-+}
++ size = 0;
+
-+/*
-+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
-+ * switch back to the original core, and return the new value.
-+ */
-+static uint
-+sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
++ if (type == 0) {
++ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
++ } else if (type == 1) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
++ } else if (type == 2) {
++ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
++ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
++ }
++
++ return (size);
++}
++
++/* return the core-type instantiation # of the current core */
++uint
++sb_coreunit(void *sbh)
+{
+ sb_info_t *si;
-+ uint origidx;
-+ uint32 *r;
-+ uint w;
-+ uint intr_val = 0;
-+
-+ ASSERT(GOODIDX(coreidx));
-+ ASSERT(regoff < SB_CORE_SIZE);
-+ ASSERT((val & ~mask) == 0);
++ uint idx;
++ uint coreid;
++ uint coreunit;
++ uint i;
+
+ si = SB_INFO(sbh);
++ coreunit = 0;
+
-+ /* save current core index */
-+ origidx = sb_coreidx(sbh);
-+
-+ /* switch core */
-+ INTR_OFF(si, intr_val);
-+ r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
-+
-+ /* mask and set */
-+ if (mask || val) {
-+ if (regoff >= SBCONFIGOFF) {
-+ w = (R_SBREG(sbh, r) & ~mask) | val;
-+ W_SBREG(sbh, r, w);
-+ } else {
-+ w = (R_REG(r) & ~mask) | val;
-+ W_REG(r, w);
-+ }
-+ }
++ idx = si->curidx;
+
-+ /* readback */
-+ w = R_SBREG(sbh, r);
++ ASSERT(GOODREGS(si->curmap));
++ coreid = sb_coreid(sbh);
+
-+ /* restore core index */
-+ if (origidx != coreidx)
-+ sb_setcoreidx(sbh, origidx);
++ /* count the cores of our type */
++ for (i = 0; i < idx; i++)
++ if (si->coreid[i] == coreid)
++ coreunit++;
+
-+ INTR_RESTORE(si, intr_val);
-+ return (w);
++ return (coreunit);
+}
+
-+/* scan the sb enumerated space to identify all cores */
-+static void
-+sb_scan(sb_info_t *si)
++static INLINE uint32
++factor6(uint32 x)
+{
-+ void *sbh;
-+ uint origidx;
-+ uint i;
++ switch (x) {
++ case CC_F6_2: return 2;
++ case CC_F6_3: return 3;
++ case CC_F6_4: return 4;
++ case CC_F6_5: return 5;
++ case CC_F6_6: return 6;
++ case CC_F6_7: return 7;
++ default: return 0;
++ }
++}
+
-+ sbh = (void*) si;
++/* calculate the speed the SB would run at given a set of clockcontrol values */
++uint32
++sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
++{
++ uint32 n1, n2, clock, m1, m2, m3, mc;
+
-+ /* numcores should already be set */
-+ ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
++ n1 = n & CN_N1_MASK;
++ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
+
-+ /* save current core index */
-+ origidx = sb_coreidx(sbh);
++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
++ n1 = factor6(n1);
++ n2 += CC_F5_BIAS;
++ } else if (pll_type == PLL_TYPE2) {
++ n1 += CC_T2_BIAS;
++ n2 += CC_T2_BIAS;
++ ASSERT((n1 >= 2) && (n1 <= 7));
++ ASSERT((n2 >= 5) && (n2 <= 23));
++ } else if (pll_type == PLL_TYPE3) {
++ return (100000000);
++ } else
++ ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4));
+
-+ si->pciidx = si->gpioidx = BADIDX;
++ clock = CC_CLOCK_BASE * n1 * n2;
+
-+ for (i = 0; i < si->numcores; i++) {
-+ sb_setcoreidx(sbh, i);
-+ si->coreid[i] = sb_coreid(sbh);
++ if (clock == 0)
++ return 0;
+
-+ if (si->coreid[i] == SB_CC)
-+ si->ccrev = sb_corerev(sbh);
++ m1 = m & CC_M1_MASK;
++ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
++ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
++ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
+
-+ else if (si->coreid[i] == SB_PCI) {
-+ si->pciidx = i;
-+ si->pcirev = sb_corerev(sbh);
++ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
++ m1 = factor6(m1);
++ if (pll_type == PLL_TYPE1)
++ m2 += CC_F5_BIAS;
++ else
++ m2 = factor6(m2);
++ m3 = factor6(m3);
+
-+ }else if (si->coreid[i] == SB_PCMCIA){
-+ si->pcmciaidx = i;
-+ si->pcmciarev = sb_corerev(sbh);
++ switch (mc) {
++ case CC_MC_BYPASS: return (clock);
++ case CC_MC_M1: return (clock / m1);
++ case CC_MC_M1M2: return (clock / (m1 * m2));
++ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3));
++ case CC_MC_M1M3: return (clock / (m1 * m3));
++ default: return (0);
+ }
-+ }
++ } else {
++ ASSERT(pll_type == PLL_TYPE2);
+
-+ /*
-+ * Find the gpio "controlling core" type and index.
-+ * Precedence:
-+ * - if there's a chip common core - use that
-+ * - else if there's a pci core (rev >= 2) - use that
-+ * - else there had better be an extif core (4710 only)
-+ */
-+ if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
-+ si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
-+ si->gpioid = SB_CC;
-+ } else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
-+ si->gpioidx = si->pciidx;
-+ si->gpioid = SB_PCI;
-+ } else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
-+ si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
-+ si->gpioid = SB_EXTIF;
-+ }
++ m1 += CC_T2_BIAS;
++ m2 += CC_T2M2_BIAS;
++ m3 += CC_T2_BIAS;
++ ASSERT((m1 >= 2) && (m1 <= 7));
++ ASSERT((m2 >= 3) && (m2 <= 10));
++ ASSERT((m3 >= 2) && (m3 <= 7));
+
-+ /* return to original core index */
-+ sb_setcoreidx(sbh, origidx);
++ if ((mc & CC_T2MC_M1BYP) == 0)
++ clock /= m1;
++ if ((mc & CC_T2MC_M2BYP) == 0)
++ clock /= m2;
++ if ((mc & CC_T2MC_M3BYP) == 0)
++ clock /= m3;
++
++ return(clock);
++ }
+}
+
-+/* may be called with core in reset */
-+void
-+sb_detach(void *sbh)
++/* returns the current speed the SB is running at */
++uint32
++sb_clock(void *sbh)
+{
+ sb_info_t *si;
++ extifregs_t *eir;
++ chipcregs_t *cc;
++ uint32 n, m;
+ uint idx;
++ uint32 pll_type, rate;
++ uint intr_val = 0;
+
+ si = SB_INFO(sbh);
++ idx = si->curidx;
++ pll_type = PLL_TYPE1;
+
-+ if (si == NULL)
-+ return;
++ INTR_OFF(si, intr_val);
+
-+ if (si->bus == SB_BUS)
-+ for (idx = 0; idx < SB_MAXCORES; idx++)
-+ if (si->regs[idx]) {
-+ REG_UNMAP(si->regs[idx]);
-+ si->regs[idx] = NULL;
-+ }
++ /* switch to extif or chipc core */
++ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++ n = R_REG(&eir->clockcontrol_n);
++ m = R_REG(&eir->clockcontrol_sb);
++ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++ n = R_REG(&cc->clockcontrol_n);
++ m = R_REG(&cc->clockcontrol_sb);
++ } else {
++ INTR_RESTORE(si, intr_val);
++ return 0;
++ }
+
-+ MFREE(si, sizeof (sb_info_t));
++ /* calculate rate */
++ rate = sb_clock_rate(pll_type, n, m);
++
++ /* switch back to previous core */
++ sb_setcoreidx(sbh, idx);
++
++ INTR_RESTORE(si, intr_val);
++
++ return rate;
+}
+
-+/* use pci dev id to determine chip id for chips not having a chipcommon core */
-+static uint
-+sb_pcidev2chip(uint pcidev)
++/* change logical "focus" to the gpio core for optimized access */
++void*
++sb_gpiosetcore(void *sbh)
+{
-+ if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
-+ return (BCM4710_DEVICE_ID);
-+ if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID))
-+ return (BCM4610_DEVICE_ID);
-+ if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
-+ return (BCM4402_DEVICE_ID);
-+ if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
-+ return (BCM4307_DEVICE_ID);
-+ if (pcidev == BCM4301_DEVICE_ID)
-+ return (BCM4301_DEVICE_ID);
++ sb_info_t *si;
+
-+ return (0);
++ si = SB_INFO(sbh);
++
++ return (sb_setcoreidx(sbh, si->gpioidx));
+}
+
-+/* convert chip number to number of i/o cores */
-+static uint
-+sb_chip2numcores(uint chip)
-+{
-+ if (chip == 0x4710)
-+ return (9);
-+ if (chip == 0x4610)
-+ return (9);
-+ if (chip == 0x4402)
-+ return (3);
-+ if ((chip == 0x4307) || (chip == 0x4301))
-+ return (5);
-+ if (chip == 0x4310)
-+ return (8);
-+ if (chip == 0x4306) /* < 4306c0 */
-+ return (6);
-+ if (chip == 0x4704)
-+ return (9);
-+ if (chip == 0x5365)
-+ return (7);
-+
-+ SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
-+ ASSERT(0);
-+ return (1);
-+}
-+
-+/* return index of coreid or BADIDX if not found */
-+static uint
-+sb_findcoreidx(void *sbh, uint coreid, uint coreunit)
++/* mask&set gpiocontrol bits */
++uint32
++sb_gpiocontrol(void *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
-+ uint found;
-+ uint i;
++ uint regoff;
+
+ si = SB_INFO(sbh);
-+ found = 0;
++ regoff = 0;
+
-+ for (i = 0; i < si->numcores; i++)
-+ if (si->coreid[i] == coreid) {
-+ if (found == coreunit)
-+ return (i);
-+ found++;
-+ }
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpiocontrol);
++ break;
+
-+ return (BADIDX);
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
++ break;
++
++ case SB_EXTIF:
++ return (0);
++ }
++
++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
-+/* change logical "focus" to the indiciated core */
-+void*
-+sb_setcoreidx(void *sbh, uint coreidx)
++/* mask&set gpio output enable bits */
++uint32
++sb_gpioouten(void *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
-+ uint32 sbaddr;
-+ uint8 tmp;
++ uint regoff;
+
+ si = SB_INFO(sbh);
++ regoff = 0;
+
-+ if (coreidx >= si->numcores)
-+ return (NULL);
-+
-+ /*
-+ * If the user has provided an interrupt mask enabled function,
-+ * then assert interrupts are disabled before switching the core.
-+ */
-+ ASSERT((si->imf == NULL) || !(*si->imf)(si->imfarg));
-+
-+ sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
-+
-+ switch (si->bus) {
-+ case SB_BUS:
-+ /* map new one */
-+ if (!si->regs[coreidx]) {
-+ si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
-+ ASSERT(GOODREGS(si->regs[coreidx]));
-+ }
-+ si->curmap = si->regs[coreidx];
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpioouten);
+ break;
+
-+ case PCI_BUS:
-+ /* point bar0 window */
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpioouten);
+ break;
+
-+ case PCMCIA_BUS:
-+ tmp = (sbaddr >> 12) & 0x0f;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
-+ tmp = (sbaddr >> 16) & 0xff;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
-+ tmp = (sbaddr >> 24) & 0xff;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpio[0].outen);
+ break;
+ }
+
-+ si->curidx = coreidx;
-+
-+ return (si->curmap);
++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
-+/* change logical "focus" to the indicated core */
-+void*
-+sb_setcore(void *sbh, uint coreid, uint coreunit)
++/* mask&set gpio output bits */
++uint32
++sb_gpioout(void *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
-+ uint idx;
++ uint regoff;
+
+ si = SB_INFO(sbh);
++ regoff = 0;
+
-+ idx = sb_findcoreidx(sbh, coreid, coreunit);
-+ if (!GOODIDX(idx))
-+ return (NULL);
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpioout);
++ break;
+
-+ return (sb_setcoreidx(sbh, idx));
-+}
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpioout);
++ break;
+
-+/* return chip number */
-+uint
-+sb_chip(void *sbh)
-+{
-+ sb_info_t *si;
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpio[0].out);
++ break;
++ }
+
-+ si = SB_INFO(sbh);
-+ return (si->chip);
++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
-+/* return chip revision number */
-+uint
-+sb_chiprev(void *sbh)
++/* return the current gpioin register value */
++uint32
++sb_gpioin(void *sbh)
+{
+ sb_info_t *si;
++ uint regoff;
+
+ si = SB_INFO(sbh);
-+ return (si->chiprev);
-+}
++ regoff = 0;
+
-+/* return chip package option */
-+uint
-+sb_chippkg(void *sbh)
-+{
-+ sb_info_t *si;
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpioin);
++ break;
+
-+ si = SB_INFO(sbh);
-+ return (si->chippkg);
-+}
++ case SB_PCI:
++ regoff = OFFSETOF(sbpciregs_t, gpioin);
++ break;
+
-+/* return board vendor id */
-+uint
-+sb_boardvendor(void *sbh)
-+{
-+ sb_info_t *si;
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpioin);
++ break;
++ }
+
-+ si = SB_INFO(sbh);
-+ return (si->boardvendor);
++ return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
+}
+
-+/* return boardtype */
-+uint
-+sb_boardtype(void *sbh)
++/* mask&set gpio interrupt polarity bits */
++uint32
++sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
-+ char *var;
++ uint regoff;
+
+ si = SB_INFO(sbh);
++ regoff = 0;
+
-+ if (si->bus == SB_BUS && si->boardtype == 0xffff) {
-+ /* boardtype format is a hex string */
-+ si->boardtype = getintvar(NULL, "boardtype");
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
++ break;
+
-+ /* backward compatibility for older boardtype string format */
-+ if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
-+ if (!strcmp(var, "bcm94710dev"))
-+ si->boardtype = BCM94710D_BOARD;
-+ else if (!strcmp(var, "bcm94710ap"))
-+ si->boardtype = BCM94710AP_BOARD;
-+ else if (!strcmp(var, "bcm94310u"))
-+ si->boardtype = BCM94310U_BOARD;
-+ else if (!strcmp(var, "bu4711"))
-+ si->boardtype = BU4711_BOARD;
-+ else if (!strcmp(var, "bu4710"))
-+ si->boardtype = BU4710_BOARD;
-+ else if (!strcmp(var, "bcm94702mn"))
-+ si->boardtype = BCM94702MN_BOARD;
-+ else if (!strcmp(var, "bcm94710r1"))
-+ si->boardtype = BCM94710R1_BOARD;
-+ else if (!strcmp(var, "bcm94710r4"))
-+ si->boardtype = BCM94710R4_BOARD;
-+ else if (!strcmp(var, "bcm94702cpci"))
-+ si->boardtype = BCM94702CPCI_BOARD;
-+ else if (!strcmp(var, "bcm95380_rr"))
-+ si->boardtype = BCM95380RR_BOARD;
-+ }
++ case SB_PCI:
++ /* pci gpio implementation does not support interrupt polarity */
++ ASSERT(0);
++ break;
++
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpiointpolarity);
++ break;
+ }
+
-+ return (si->boardtype);
++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
-+/* return board bus style */
-+uint
-+sb_boardstyle(void *sbh)
++/* mask&set gpio interrupt mask bits */
++uint32
++sb_gpiointmask(void *sbh, uint32 mask, uint32 val)
+{
+ sb_info_t *si;
-+ uint16 w;
++ uint regoff;
+
+ si = SB_INFO(sbh);
++ regoff = 0;
+
-+ if (si->bus == PCMCIA_BUS)
-+ return (BOARDSTYLE_PCMCIA);
-+
-+ if (si->bus == SB_BUS)
-+ return (BOARDSTYLE_SOC);
-+
-+ /* bus is PCI */
++ switch (si->gpioid) {
++ case SB_CC:
++ regoff = OFFSETOF(chipcregs_t, gpiointmask);
++ break;
+
-+ if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0)
-+ return (BOARDSTYLE_CARDBUS);
++ case SB_PCI:
++ /* pci gpio implementation does not support interrupt mask */
++ ASSERT(0);
++ break;
+
-+ if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) &&
-+ (w == 0x0313))
-+ return (BOARDSTYLE_CARDBUS);
++ case SB_EXTIF:
++ regoff = OFFSETOF(extifregs_t, gpiointmask);
++ break;
++ }
+
-+ return (BOARDSTYLE_PCI);
++ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
+}
+
-+/* return boolean if sbh device is in pci hostmode or client mode */
-+uint
-+sb_bus(void *sbh)
-+{
-+ sb_info_t *si;
+
-+ si = SB_INFO(sbh);
-+ return (si->bus);
-+}
-+
-+/* return list of found cores */
-+uint
-+sb_corelist(void *sbh, uint coreid[])
++/*
++ * Return the slowclock min or max frequency.
++ * Three sources of SLOW CLOCK:
++ * 1. On Chip LPO - 32khz or 160khz
++ * 2. On Chip Xtal OSC - 20mhz/4*(divider+1)
++ * 3. External PCI clock - 66mhz/4*(divider+1)
++ */
++static uint
++slowfreq(void *sbh, bool max)
+{
+ sb_info_t *si;
++ chipcregs_t *cc;
++ uint32 v;
++ uint div;
+
+ si = SB_INFO(sbh);
+
-+ bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
-+ return (si->numcores);
-+}
++ ASSERT(sb_coreid(sbh) == SB_CC);
+
-+/* return current register mapping */
-+void *
-+sb_coreregs(void *sbh)
-+{
-+ sb_info_t *si;
++ cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
+
-+ si = SB_INFO(sbh);
-+ ASSERT(GOODREGS(si->curmap));
++ /* shouldn't be here unless we've established the chip has dynamic power control */
++ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
+
-+ return (si->curmap);
++ if (si->ccrev < 6) {
++ v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
++
++ if (v & PCI_CFG_GPIO_SCS)
++ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
++ else
++ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
++ } else {
++ v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
++ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
++ if (v == SCC_SS_LPO)
++ return (max? LPOMAXFREQ : LPOMINFREQ);
++ else if (v == SCC_SS_XTAL)
++ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
++ else if (v == SCC_SS_PCI)
++ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
++ else
++ ASSERT(0);
++ }
++ return (0);
+}
+
-+/* Check if a target abort has happened and clear it */
-+bool
-+sb_taclear(void *sbh)
++/* initialize power control delay registers */
++void
++sb_pwrctl_init(void *sbh)
+{
+ sb_info_t *si;
-+ bool rc = FALSE;
-+ sbconfig_t *sb;
++ uint origidx;
++ chipcregs_t *cc;
++ uint slowmaxfreq;
++ uint pll_on_delay, fref_sel_delay;
+
+ si = SB_INFO(sbh);
-+ sb = REGS2SB(si->curmap);
+
-+ if (si->bus == PCI_BUS) {
-+ uint32 stcmd;
++ if (si->bus == SB_BUS)
++ return;
+
-+ stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd));
-+ rc = (stcmd & 0x08000000) != 0;
++ origidx = si->curidx;
+
-+ if (rc) {
-+ /* Target abort bit is set, clear it */
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd), stcmd);
-+ }
-+ } else if (si->bus == PCMCIA_BUS) {
-+ rc = FALSE;
-+ }
-+ else if (si->bus == SDIO_BUS) {
-+ /* due to 4317 A0 HW bug, sdio core wedged on target abort,
-+ just clear SBSErr bit blindly */
-+ if (0x0 != R_SBREG(sbh, &sb->sbtmerrlog)) {
-+ SB_ERROR(("SDIO target abort, clean it"));
-+ W_SBREG(sbh, &sb->sbtmstatehigh, 0);
-+ }
-+ rc = FALSE;
-+ }
++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
++ return;
+
-+ return (rc);
++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
++ goto done;
++
++ slowmaxfreq = slowfreq(sbh, TRUE);
++ pll_on_delay = ((slowmaxfreq * PLL_DELAY) + 999999) / 1000000;
++ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
++
++ W_REG(&cc->pll_on_delay, pll_on_delay);
++ W_REG(&cc->fref_sel_delay, fref_sel_delay);
++
++ /* 4317pc does not work with SlowClock less than 5Mhz */
++ if (si->bus == PCMCIA_BUS)
++ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (0 << SCC_CD_SHF));
++
++done:
++ sb_setcoreidx(sbh, origidx);
+}
+
-+/* do buffered registers update */
-+void
-+sb_commit(void *sbh)
++/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
++uint16
++sb_pwrctl_fast_pwrup_delay(void *sbh)
+{
+ sb_info_t *si;
-+ sbpciregs_t *pciregs;
+ uint origidx;
++ chipcregs_t *cc;
++ uint slowminfreq;
++ uint16 fpdelay;
+ uint intr_val = 0;
+
+ si = SB_INFO(sbh);
-+
++ fpdelay = 0;
+ origidx = si->curidx;
-+ ASSERT(GOODIDX(origidx));
++
++ if (si->bus == SB_BUS)
++ goto done;
+
+ INTR_OFF(si, intr_val);
-+ /* switch over to pci core */
-+ pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0);
+
-+ /* do the buffer registers update */
-+ W_REG(&pciregs->bcastaddr, SB_COMMIT);
-+ W_REG(&pciregs->bcastdata, 0x0);
++ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
++ goto done;
+
-+ /* restore core index */
++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
++ goto done;
++
++ slowminfreq = slowfreq(sbh, FALSE);
++ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
++
++done:
+ sb_setcoreidx(sbh, origidx);
+ INTR_RESTORE(si, intr_val);
++ return (fpdelay);
+}
+
-+/* reset and re-enable a core */
-+void
-+sb_core_reset(void *sbh, uint32 bits)
++/* turn primary xtal and/or pll off/on */
++int
++sb_pwrctl_xtal(void *sbh, uint what, bool on)
+{
+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ volatile uint32 dummy;
++ uint32 in, out, outen;
+
+ si = SB_INFO(sbh);
-+ ASSERT(GOODREGS(si->curmap));
-+ sb = REGS2SB(si->curmap);
+
-+ /*
-+ * Must do the disable sequence first to work for arbitrary current core state.
-+ */
-+ sb_core_disable(sbh, bits);
++
++ if (si->bus == PCMCIA_BUS) {
++ return (0);
++ }
++
++ if (si->bus != PCI_BUS)
++ return (-1);
++
++ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
++ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
++ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
+
+ /*
-+ * Now do the initialization sequence.
++ * We can't actually read the state of the PLLPD so we infer it
++ * by the value of XTAL_PU which *is* readable via gpioin.
+ */
++ if (on && (in & PCI_CFG_GPIO_XTAL))
++ return (0);
+
-+ /* set reset while enabling the clock and forcing them on throughout the core */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++ if (what & XTAL)
++ outen |= PCI_CFG_GPIO_XTAL;
++ if (what & PLL)
++ outen |= PCI_CFG_GPIO_PLL;
+
-+ if (sb_coreid(sbh) == SB_ILINE100) {
-+ bcm_mdelay(50);
-+ } else {
-+ OSL_DELAY(1);
-+ }
++ if (on) {
++ /* turn primary xtal on */
++ if (what & XTAL) {
++ out |= PCI_CFG_GPIO_XTAL;
++ if (what & PLL)
++ out |= PCI_CFG_GPIO_PLL;
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
++ OSL_DELAY(200);
++ }
+
-+ if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) {
-+ W_SBREG(sbh, &sb->sbtmstatehigh, 0);
-+ }
-+ if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
-+ AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
++ /* turn pll on */
++ if (what & PLL) {
++ out &= ~PCI_CFG_GPIO_PLL;
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
++ OSL_DELAY(2000);
++ }
++ } else {
++ if (what & XTAL)
++ out &= ~PCI_CFG_GPIO_XTAL;
++ if (what & PLL)
++ out |= PCI_CFG_GPIO_PLL;
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
++ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
+ }
+
-+ /* clear reset and allow it to propagate throughout the core */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
-+ OSL_DELAY(1);
-+
-+ /* leave clock enabled */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
-+ OSL_DELAY(1);
++ return (0);
+}
+
-+void
-+sb_core_tofixup(void *sbh)
++/* set dynamic power control mode (forceslow, forcefast, dynamic) */
++/* returns true if ignore pll off is set and false if it is not */
++bool
++sb_pwrctl_clk(void *sbh, uint mode)
+{
+ sb_info_t *si;
-+ sbconfig_t *sb;
++ uint origidx;
++ chipcregs_t *cc;
++ uint32 scc;
++ bool forcefastclk=FALSE;
++ uint intr_val = 0;
+
+ si = SB_INFO(sbh);
+
-+ if (si->pcirev >= 5)
-+ return;
++ /* chipcommon cores prior to rev6 don't support slowclkcontrol */
++ if (si->ccrev < 6)
++ return (FALSE);
+
-+ ASSERT(GOODREGS(si->curmap));
-+ sb = REGS2SB(si->curmap);
++ INTR_OFF(si, intr_val);
+
-+ if (si->bus == SB_BUS) {
-+ SET_SBREG(sbh, &sb->sbimconfiglow,
-+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+ (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
-+ } else {
-+ if (sb_coreid(sbh) == SB_PCI) {
-+ SET_SBREG(sbh, &sb->sbimconfiglow,
-+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+ } else {
-+ SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
-+ }
-+ }
++ origidx = si->curidx;
+
-+ sb_commit(sbh);
-+}
-+
-+void
-+sb_core_disable(void *sbh, uint32 bits)
-+{
-+ sb_info_t *si;
-+ volatile uint32 dummy;
-+ sbconfig_t *sb;
-+
-+ si = SB_INFO(sbh);
-+
-+ ASSERT(GOODREGS(si->curmap));
-+ sb = REGS2SB(si->curmap);
-+
-+ /* must return if core is already in reset */
-+ if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET)
-+ return;
-+
-+ /* put into reset and return if clocks are not enabled */
-+ if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0)
-+ goto disable;
++ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
++ ASSERT(cc != NULL);
+
-+ /* set the reject bit */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ));
++ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
++ goto done;
+
-+ /* spin until reject is set */
-+ while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0)
-+ OSL_DELAY(1);
++ switch (mode) {
++ case CLK_FAST: /* force fast (pll) clock */
++ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
++ sb_pwrctl_xtal(sbh, XTAL, ON);
+
-+ /* spin until sbtmstatehigh.busy is clear */
-+ while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY)
-+ OSL_DELAY(1);
++ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
++ break;
+
-+ /* set reset and reject while enabling the clocks */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET));
-+ dummy = R_SBREG(sbh, &sb->sbtmstatelow);
-+ OSL_DELAY(10);
++ case CLK_SLOW: /* force slow clock */
++ if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS))
++ return (-1);
+
-+ disable:
-+ /* leave reset and reject asserted */
-+ W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET));
-+ OSL_DELAY(1);
-+}
++ if (si->ccrev >= 6)
++ OR_REG(&cc->slow_clk_ctl, SCC_FS);
++ break;
+
-+void
-+sb_watchdog(void *sbh, uint ticks)
-+{
-+ sb_info_t *si = SB_INFO(sbh);
++ case CLK_DYNAMIC: /* enable dynamic power control */
++ scc = R_REG(&cc->slow_clk_ctl);
++ scc &= ~(SCC_FS | SCC_IP | SCC_XC);
++ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
++ scc |= SCC_XC;
++ W_REG(&cc->slow_clk_ctl, scc);
+
-+ /* instant NMI */
-+ switch (si->gpioid) {
-+ case SB_CC:
-+ sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
-+ break;
-+ case SB_EXTIF:
-+ sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
++ /* for dynamic control, we have to release our xtal_pu "force on" */
++ if (scc & SCC_XC)
++ sb_pwrctl_xtal(sbh, XTAL, OFF);
+ break;
+ }
++
++ /* Is the h/w forcing the use of the fast clk */
++ forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
++
++done:
++ sb_setcoreidx(sbh, origidx);
++ INTR_RESTORE(si, intr_val);
++ return (forcefastclk);
+}
+
-+/* initialize the pcmcia core */
++/* register driver interrupt disabling and restoring callback functions */
+void
-+sb_pcmcia_init(void *sbh)
++sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg)
+{
+ sb_info_t *si;
-+ uint8 cor;
+
+ si = SB_INFO(sbh);
-+
-+ /* enable d11 mac interrupts */
-+ if (si->chip == BCM4301_DEVICE_ID) {
-+ /* Have to use FCR2 in 4301 */
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
-+ cor |= COR_IRQEN | COR_FUNEN;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
-+ } else {
-+ OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
-+ cor |= COR_IRQEN | COR_FUNEN;
-+ OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
-+ }
-+
++ si->intr_arg = intr_arg;
++ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
++ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
++ /* save current core id. when this function called, the current core
++ * must be the core which provides driver functions(il, et, wl, etc.)
++ */
++ si->dev_coreid = si->coreid[si->curidx];
+}
+
+
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h 2005-08-28 11:12:20.430859152 +0200
+@@ -0,0 +1,90 @@
+/*
-+ * Configure the pci core for pci client (NIC) action
-+ * and get appropriate dma offset value.
-+ * coremask is the bitvec of cores by index to be enabled.
++ * BCM4710 address space map and definitions
++ * Think twice before adding to this file, this is not the kitchen sink
++ * These definitions are not guaranteed for all 47xx chips, only the 4710
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id$
+ */
-+void
-+sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask)
-+{
-+ sb_info_t *si;
-+ sbconfig_t *sb;
-+ sbpciregs_t *pciregs;
-+ uint32 sbflag;
-+ uint32 w;
-+ uint idx;
-+
-+ si = SB_INFO(sbh);
-+
-+ if (dmaoffset)
-+ *dmaoffset = 0;
+
-+ /* if not pci bus, we're done */
-+ if (si->bus != PCI_BUS)
-+ return;
++#ifndef _bcm4710_h_
++#define _bcm4710_h_
+
-+ ASSERT(si->pciidx);
++/* Address map */
++#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */
++#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */
++#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */
++#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
++#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
++#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */
+
-+ /* get current core index */
-+ idx = si->curidx;
++/* Core register space */
++#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */
++#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */
++#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */
++#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */
++#define BCM4710_REG_USB 0x18004000 /* USB core registers */
++#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */
++#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */
++#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */
++#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */
+
-+ /* we interrupt on this backplane flag number */
-+ ASSERT(GOODREGS(si->curmap));
-+ sb = REGS2SB(si->curmap);
-+ sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
++#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */
++#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */
++#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */
++#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */
++#define BCM4710_PROG 0x1f800000 /* Programable interface */
++#define BCM4710_FLASH 0x1fc00000 /* Flash */
+
-+ /* switch over to pci core */
-+ pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx);
-+ sb = REGS2SB(pciregs);
++#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
+
-+ /*
-+ * Enable sb->pci interrupts. Assume
-+ * PCI rev 2.3 support was added in pci core rev 6 and things changed..
-+ */
-+ if (si->pcirev < 6) {
-+ /* set sbintvec bit for our flag number */
-+ OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag));
-+ } else {
-+ /* pci config write to set this core bit in PCIIntMask */
-+ w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
-+ w |= (coremask << PCI_SBIM_SHIFT);
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
-+ }
++#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300)
+
-+ /* enable prefetch and bursts for sonics-to-pci translation 2 */
-+ OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
++#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000)
++#define BCM4710_LED (BCM4710_EXTIF + 0x00900000)
+
-+ if (si->pcirev < 5) {
-+ SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+ sb_commit(sbh);
-+ }
++#define SBFLAG_PCI 0
++#define SBFLAG_ENET0 1
++#define SBFLAG_ILINE20 2
++#define SBFLAG_CODEC 3
++#define SBFLAG_USB 4
++#define SBFLAG_EXTIF 5
++#define SBFLAG_ENET1 6
+
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
++#ifdef CONFIG_HWSIM
++#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0)
++#else
++#define BCM4710_TRACE(trval)
++#endif
+
-+ /* use large sb pci dma window */
-+ if (dmaoffset)
-+ *dmaoffset = SB_PCI_DMA;
-+}
+
-+uint32
-+sb_base(uint32 admatch)
-+{
-+ uint32 base;
-+ uint type;
++/* BCM94702 CPCI -ExtIF used for LocalBus devs */
+
-+ type = admatch & SBAM_TYPE_MASK;
-+ ASSERT(type < 3);
++#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF
++#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000)
++#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000)
++#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR
++#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000)
++#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000)
++#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
++#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
+
-+ base = 0;
++#define LED_REG(x) \
++ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
+
-+ if (type == 0) {
-+ base = admatch & SBAM_BASE0_MASK;
-+ } else if (type == 1) {
-+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
-+ base = admatch & SBAM_BASE1_MASK;
-+ } else if (type == 2) {
-+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
-+ base = admatch & SBAM_BASE2_MASK;
-+ }
++/*
++ * Reset function implemented in PLD. Read or write should trigger hard reset
++ */
++#define SYS_HARD_RESET() \
++ { for (;;) \
++ *( (volatile unsigned char *)\
++ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
++ }
+
-+ return (base);
-+}
-+
-+uint32
-+sb_size(uint32 admatch)
-+{
-+ uint32 size;
-+ uint type;
++#endif /* _bcm4710_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h 2005-08-28 11:12:20.431859000 +0200
+@@ -0,0 +1,238 @@
++/*
++ * Broadcom device-specific manifest constants.
++ *
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ */
+
-+ type = admatch & SBAM_TYPE_MASK;
-+ ASSERT(type < 3);
++#ifndef _BCMDEVS_H
++#define _BCMDEVS_H
+
-+ size = 0;
+
-+ if (type == 0) {
-+ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
-+ } else if (type == 1) {
-+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
-+ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
-+ } else if (type == 2) {
-+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
-+ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
-+ }
++/* Known PCI vendor Id's */
++#define VENDOR_EPIGRAM 0xfeda
++#define VENDOR_BROADCOM 0x14e4
++#define VENDOR_3COM 0x10b7
++#define VENDOR_NETGEAR 0x1385
++#define VENDOR_DIAMOND 0x1092
++#define VENDOR_DELL 0x1028
++#define VENDOR_HP 0x0e11
++#define VENDOR_APPLE 0x106b
+
-+ return (size);
-+}
++/* PCI Device Id's */
++#define BCM4210_DEVICE_ID 0x1072 /* never used */
++#define BCM4211_DEVICE_ID 0x4211
++#define BCM4230_DEVICE_ID 0x1086 /* never used */
++#define BCM4231_DEVICE_ID 0x4231
+
-+/* return the core-type instantiation # of the current core */
-+uint
-+sb_coreunit(void *sbh)
-+{
-+ sb_info_t *si;
-+ uint idx;
-+ uint coreid;
-+ uint coreunit;
-+ uint i;
++#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */
++#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */
++#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */
++#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */
+
-+ si = SB_INFO(sbh);
-+ coreunit = 0;
++#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */
++#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */
+
-+ idx = si->curidx;
++#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */
++#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */
+
-+ ASSERT(GOODREGS(si->curmap));
-+ coreid = sb_coreid(sbh);
++#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */
++#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */
++#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */
++#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */
++#define BCM47XX_USB_ID 0x4715 /* 47xx usb */
++#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */
++#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */
++#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */
+
-+ /* count the cores of our type */
-+ for (i = 0; i < idx; i++)
-+ if (si->coreid[i] == coreid)
-+ coreunit++;
++#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */
+
-+ return (coreunit);
-+}
++#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */
++#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */
++#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */
++#define BCM4610_ENET_ID 0x4613 /* 4610 enet */
++#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */
++#define BCM4610_USB_ID 0x4615 /* 4610 usb */
+
-+static INLINE uint32
-+factor6(uint32 x)
-+{
-+ switch (x) {
-+ case CC_F6_2: return 2;
-+ case CC_F6_3: return 3;
-+ case CC_F6_4: return 4;
-+ case CC_F6_5: return 5;
-+ case CC_F6_6: return 6;
-+ case CC_F6_7: return 7;
-+ default: return 0;
-+ }
-+}
++#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */
++#define BCM4402_ENET_ID 0x4402 /* 4402 enet */
++#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */
+
-+/* calculate the speed the SB would run at given a set of clockcontrol values */
-+uint32
-+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
-+{
-+ uint32 n1, n2, clock, m1, m2, m3, mc;
++#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */
++#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */
+
-+ n1 = n & CN_N1_MASK;
-+ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
++#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */
++#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */
++#define BCM4307_ENET_ID 0x4306 /* 4307 enet */
++#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */
+
-+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
-+ n1 = factor6(n1);
-+ n2 += CC_F5_BIAS;
-+ } else if (pll_type == PLL_TYPE2) {
-+ n1 += CC_T2_BIAS;
-+ n2 += CC_T2_BIAS;
-+ ASSERT((n1 >= 2) && (n1 <= 7));
-+ ASSERT((n2 >= 5) && (n2 <= 23));
-+ } else if (pll_type == PLL_TYPE3) {
-+ return (100000000);
-+ } else
-+ ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4));
++#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */
++#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */
++#define BCM4306_D11G_ID2 0x4325
++#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */
++#define BCM4306_UART_ID 0x4322 /* 4306 uart */
++#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */
++#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */
+
-+ clock = CC_CLOCK_BASE * n1 * n2;
++#define BCM4309_PKG_ID 1 /* 4309 package id */
+
-+ if (clock == 0)
-+ return 0;
++#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */
++#define BCM4303_PKG_ID 2 /* 4303 package id */
+
-+ m1 = m & CC_M1_MASK;
-+ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
-+ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
-+ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
++#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */
++#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */
++#define BCM4310_UART_ID 0x4312 /* 4310 uart */
++#define BCM4310_ENET_ID 0x4313 /* 4310 enet */
++#define BCM4310_USB_ID 0x4315 /* 4310 usb */
+
-+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
-+ m1 = factor6(m1);
-+ if (pll_type == PLL_TYPE1)
-+ m2 += CC_F5_BIAS;
-+ else
-+ m2 = factor6(m2);
-+ m3 = factor6(m3);
++#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */
++#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */
+
-+ switch (mc) {
-+ case CC_MC_BYPASS: return (clock);
-+ case CC_MC_M1: return (clock / m1);
-+ case CC_MC_M1M2: return (clock / (m1 * m2));
-+ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3));
-+ case CC_MC_M1M3: return (clock / (m1 * m3));
-+ default: return (0);
-+ }
-+ } else {
-+ ASSERT(pll_type == PLL_TYPE2);
++#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */
+
-+ m1 += CC_T2_BIAS;
-+ m2 += CC_T2M2_BIAS;
-+ m3 += CC_T2_BIAS;
-+ ASSERT((m1 >= 2) && (m1 <= 7));
-+ ASSERT((m2 >= 3) && (m2 <= 10));
-+ ASSERT((m3 >= 2) && (m3 <= 7));
++#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */
++#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */
++#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */
+
-+ if ((mc & CC_T2MC_M1BYP) == 0)
-+ clock /= m1;
-+ if ((mc & CC_T2MC_M2BYP) == 0)
-+ clock /= m2;
-+ if ((mc & CC_T2MC_M3BYP) == 0)
-+ clock /= m3;
++#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */
+
-+ return(clock);
-+ }
-+}
++#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */
+
-+/* returns the current speed the SB is running at */
-+uint32
-+sb_clock(void *sbh)
-+{
-+ sb_info_t *si;
-+ extifregs_t *eir;
-+ chipcregs_t *cc;
-+ uint32 n, m;
-+ uint idx;
-+ uint32 pll_type, rate;
-+ uint intr_val = 0;
+
-+ si = SB_INFO(sbh);
-+ idx = si->curidx;
-+ pll_type = PLL_TYPE1;
++/* PCMCIA vendor Id's */
+
-+ INTR_OFF(si, intr_val);
++#define VENDOR_BROADCOM_PCMCIA 0x02d0
+
-+ /* switch to extif or chipc core */
-+ if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+ n = R_REG(&eir->clockcontrol_n);
-+ m = R_REG(&eir->clockcontrol_sb);
-+ } else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+ pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+ n = R_REG(&cc->clockcontrol_n);
-+ m = R_REG(&cc->clockcontrol_sb);
-+ } else {
-+ INTR_RESTORE(si, intr_val);
-+ return 0;
-+ }
++/* SDIO vendor Id's */
++#define VENDOR_BROADCOM_SDIO 0x00BF
+
-+ /* calculate rate */
-+ rate = sb_clock_rate(pll_type, n, m);
+
-+ /* switch back to previous core */
-+ sb_setcoreidx(sbh, idx);
++/* boardflags */
++#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */
++#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */
++#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */
++#define BFL_ENETSPI 0x0010 /* This board has ephy roboswitch spi */
++#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */
++#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */
++#define BFL_ENETVLAN 0x0100 /* This board can do vlan */
+
-+ INTR_RESTORE(si, intr_val);
++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
++#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */
++#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */
++#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */
++#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
++#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
++#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
++#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
++#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+
-+ return rate;
-+}
++/* Bus types */
++#define SB_BUS 0 /* Silicon Backplane */
++#define PCI_BUS 1 /* PCI target */
++#define PCMCIA_BUS 2 /* PCMCIA target */
++#define SDIO_BUS 3 /* SDIO target */
+
-+/* change logical "focus" to the gpio core for optimized access */
-+void*
-+sb_gpiosetcore(void *sbh)
-+{
-+ sb_info_t *si;
++/* Reference Board Types */
+
-+ si = SB_INFO(sbh);
++#define BU4710_BOARD 0x0400
++#define VSIM4710_BOARD 0x0401
++#define QT4710_BOARD 0x0402
+
-+ return (sb_setcoreidx(sbh, si->gpioidx));
-+}
++#define BU4610_BOARD 0x0403
++#define VSIM4610_BOARD 0x0404
+
-+/* mask&set gpiocontrol bits */
-+uint32
-+sb_gpiocontrol(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ uint regoff;
++#define BU4307_BOARD 0x0405
++#define BCM94301CB_BOARD 0x0406
++#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */
++#define BCM94301MP_BOARD 0x0407
++#define BCM94307MP_BOARD 0x0408
++#define BCMAP4307_BOARD 0x0409
+
-+ si = SB_INFO(sbh);
-+ regoff = 0;
++#define BU4309_BOARD 0x040a
++#define BCM94309CB_BOARD 0x040b
++#define BCM94309MP_BOARD 0x040c
++#define BCM4309AP_BOARD 0x040d
+
-+ switch (si->gpioid) {
-+ case SB_CC:
-+ regoff = OFFSETOF(chipcregs_t, gpiocontrol);
-+ break;
++#define BCM94302MP_BOARD 0x040e
+
-+ case SB_PCI:
-+ regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
-+ break;
++#define VSIM4310_BOARD 0x040f
++#define BU4711_BOARD 0x0410
++#define BCM94310U_BOARD 0x0411
++#define BCM94310AP_BOARD 0x0412
++#define BCM94310MP_BOARD 0x0414
+
-+ case SB_EXTIF:
-+ return (0);
-+ }
++#define BU4306_BOARD 0x0416
++#define BCM94306CB_BOARD 0x0417
++#define BCM94306MP_BOARD 0x0418
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++#define BCM94710D_BOARD 0x041a
++#define BCM94710R1_BOARD 0x041b
++#define BCM94710R4_BOARD 0x041c
++#define BCM94710AP_BOARD 0x041d
+
-+/* mask&set gpio output enable bits */
-+uint32
-+sb_gpioouten(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ uint regoff;
+
-+ si = SB_INFO(sbh);
-+ regoff = 0;
++#define BU2050_BOARD 0x041f
+
-+ switch (si->gpioid) {
-+ case SB_CC:
-+ regoff = OFFSETOF(chipcregs_t, gpioouten);
-+ break;
+
-+ case SB_PCI:
-+ regoff = OFFSETOF(sbpciregs_t, gpioouten);
-+ break;
++#define BCM94309G_BOARD 0x0421
+
-+ case SB_EXTIF:
-+ regoff = OFFSETOF(extifregs_t, gpio[0].outen);
-+ break;
-+ }
++#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++#define BU4704_BOARD 0x0423
++#define BU4702_BOARD 0x0424
+
-+/* mask&set gpio output bits */
-+uint32
-+sb_gpioout(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ uint regoff;
++#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */
+
-+ si = SB_INFO(sbh);
-+ regoff = 0;
++#define BU4317_BOARD 0x0426
+
-+ switch (si->gpioid) {
-+ case SB_CC:
-+ regoff = OFFSETOF(chipcregs_t, gpioout);
-+ break;
+
-+ case SB_PCI:
-+ regoff = OFFSETOF(sbpciregs_t, gpioout);
-+ break;
++#define BCM94702MN_BOARD 0x0428
+
-+ case SB_EXTIF:
-+ regoff = OFFSETOF(extifregs_t, gpio[0].out);
-+ break;
-+ }
++/* BCM4702 1U CompactPCI Board */
++#define BCM94702CPCI_BOARD 0x0429
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++/* BCM4702 with BCM95380 VLAN Router */
++#define BCM95380RR_BOARD 0x042a
+
-+/* return the current gpioin register value */
-+uint32
-+sb_gpioin(void *sbh)
-+{
-+ sb_info_t *si;
-+ uint regoff;
++/* cb4306 with SiGe PA */
++#define BCM94306CBSG_BOARD 0x042b
+
-+ si = SB_INFO(sbh);
-+ regoff = 0;
++/* mp4301 with 2050 radio */
++#define BCM94301MPL_BOARD 0x042c
+
-+ switch (si->gpioid) {
-+ case SB_CC:
-+ regoff = OFFSETOF(chipcregs_t, gpioin);
-+ break;
++/* cb4306 with SiGe PA */
++#define PCSG94306_BOARD 0x042d
+
-+ case SB_PCI:
-+ regoff = OFFSETOF(sbpciregs_t, gpioin);
-+ break;
++/* bu4704 with sdram */
++#define BU4704SD_BOARD 0x042e
+
-+ case SB_EXTIF:
-+ regoff = OFFSETOF(extifregs_t, gpioin);
-+ break;
-+ }
++/* Dual 11a/11g Router */
++#define BCM94704AGR_BOARD 0x042f
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
-+}
++/* 11a-only minipci */
++#define BCM94308MP_BOARD 0x0430
+
-+/* mask&set gpio interrupt polarity bits */
-+uint32
-+sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ uint regoff;
+
-+ si = SB_INFO(sbh);
-+ regoff = 0;
+
-+ switch (si->gpioid) {
-+ case SB_CC:
-+ regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
-+ break;
++/* BCM94317 boards */
++#define BCM94317CB_BOARD 0x0440
++#define BCM94317MP_BOARD 0x0441
++#define BCM94317PCMCIA_BOARD 0x0442
++#define BCM94317SDIO_BOARD 0x0443
+
-+ case SB_PCI:
-+ /* pci gpio implementation does not support interrupt polarity */
-+ ASSERT(0);
-+ break;
++#define BU4712_BOARD 0x0444
+
-+ case SB_EXTIF:
-+ regoff = OFFSETOF(extifregs_t, gpiointpolarity);
-+ break;
-+ }
++/* BCM4712 boards */
++#define BCM94712AGR_BOARD 0x0445
++#define BCM94712AP_BOARD 0x0446
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++/* BCM4702 boards */
++#define CT4702AP_BOARD 0x0447
+
-+/* mask&set gpio interrupt mask bits */
-+uint32
-+sb_gpiointmask(void *sbh, uint32 mask, uint32 val)
-+{
-+ sb_info_t *si;
-+ uint regoff;
++#endif /* _BCMDEVS_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h 2005-08-28 11:12:20.431859000 +0200
+@@ -0,0 +1,125 @@
++/*******************************************************************************
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * local version of endian.h - byte order defines
++ ******************************************************************************/
+
-+ si = SB_INFO(sbh);
-+ regoff = 0;
++#ifndef _BCMENDIAN_H_
++#define _BCMENDIAN_H_
+
-+ switch (si->gpioid) {
-+ case SB_CC:
-+ regoff = OFFSETOF(chipcregs_t, gpiointmask);
-+ break;
++#include <typedefs.h>
+
-+ case SB_PCI:
-+ /* pci gpio implementation does not support interrupt mask */
-+ ASSERT(0);
-+ break;
++/* Byte swap a 16 bit value */
++#define BCMSWAP16(val) \
++ ((uint16)( \
++ (((uint16)(val) & (uint16)0x00ffU) << 8) | \
++ (((uint16)(val) & (uint16)0xff00U) >> 8) ))
++
++/* Byte swap a 32 bit value */
++#define BCMSWAP32(val) \
++ ((uint32)( \
++ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
++ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \
++ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \
++ (((uint32)(val) & (uint32)0xff000000UL) >> 24) ))
+
-+ case SB_EXTIF:
-+ regoff = OFFSETOF(extifregs_t, gpiointmask);
-+ break;
-+ }
++static INLINE uint16
++bcmswap16(uint16 val)
++{
++ return BCMSWAP16(val);
++}
+
-+ return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
++static INLINE uint32
++bcmswap32(uint32 val)
++{
++ return BCMSWAP32(val);
+}
+
++/* buf - start of buffer of shorts to swap */
++/* len - byte length of buffer */
++static INLINE void
++bcmswap16_buf(uint16 *buf, uint len)
++{
++ len = len/2;
+
-+/*
-+ * Return the slowclock min or max frequency.
-+ * Three sources of SLOW CLOCK:
-+ * 1. On Chip LPO - 32khz or 160khz
-+ * 2. On Chip Xtal OSC - 20mhz/4*(divider+1)
-+ * 3. External PCI clock - 66mhz/4*(divider+1)
-+ */
-+static uint
-+slowfreq(void *sbh, bool max)
-+{
-+ sb_info_t *si;
-+ chipcregs_t *cc;
-+ uint32 v;
-+ uint div;
-+
-+ si = SB_INFO(sbh);
-+
-+ ASSERT(sb_coreid(sbh) == SB_CC);
++ while(len--){
++ *buf = bcmswap16(*buf);
++ buf++;
++ }
++}
+
-+ cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
++#ifndef hton16
++#ifndef IL_BIGENDIAN
++#define HTON16(i) BCMSWAP16(i)
++#define hton16(i) bcmswap16(i)
++#define hton32(i) bcmswap32(i)
++#define ntoh16(i) bcmswap16(i)
++#define ntoh32(i) bcmswap32(i)
++#define ltoh16(i) (i)
++#define ltoh32(i) (i)
++#define htol16(i) (i)
++#define htol32(i) (i)
++#else
++#define HTON16(i) (i)
++#define hton16(i) (i)
++#define hton32(i) (i)
++#define ntoh16(i) (i)
++#define ntoh32(i) (i)
++#define ltoh16(i) bcmswap16(i)
++#define ltoh32(i) bcmswap32(i)
++#define htol16(i) bcmswap16(i)
++#define htol32(i) bcmswap32(i)
++#endif
++#endif
+
-+ /* shouldn't be here unless we've established the chip has dynamic power control */
-+ ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
++#ifndef IL_BIGENDIAN
++#define ltoh16_buf(buf, i)
++#define htol16_buf(buf, i)
++#else
++#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
++#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
++#endif
+
-+ if (si->ccrev < 6) {
-+ v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
++/*
++* load 16-bit value from unaligned little endian byte array.
++*/
++static INLINE uint16
++ltoh16_ua(uint8 *bytes)
++{
++ return (bytes[1]<<8)+bytes[0];
++}
+
-+ if (v & PCI_CFG_GPIO_SCS)
-+ return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
-+ else
-+ return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
-+ } else {
-+ v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
-+ div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
-+ if (v == SCC_SS_LPO)
-+ return (max? LPOMAXFREQ : LPOMINFREQ);
-+ else if (v == SCC_SS_XTAL)
-+ return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
-+ else if (v == SCC_SS_PCI)
-+ return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
-+ else
-+ ASSERT(0);
-+ }
-+ return (0);
++/*
++* load 32-bit value from unaligned little endian byte array.
++*/
++static INLINE uint32
++ltoh32_ua(uint8 *bytes)
++{
++ return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0];
+}
+
-+/* initialize power control delay registers */
-+void
-+sb_pwrctl_init(void *sbh)
++/*
++* load 16-bit value from unaligned big(network) endian byte array.
++*/
++static INLINE uint16
++ntoh16_ua(uint8 *bytes)
+{
-+ sb_info_t *si;
-+ uint origidx;
-+ chipcregs_t *cc;
-+ uint slowmaxfreq;
-+ uint pll_on_delay, fref_sel_delay;
++ return (bytes[0]<<8)+bytes[1];
++}
+
-+ si = SB_INFO(sbh);
++/*
++* load 32-bit value from unaligned big(network) endian byte array.
++*/
++static INLINE uint32
++ntoh32_ua(uint8 *bytes)
++{
++ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3];
++}
+
-+ if (si->bus == SB_BUS)
-+ return;
++#endif /* _BCMENDIAN_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-08-28 11:12:20.432858848 +0200
+@@ -0,0 +1,229 @@
++/*
++ * Hardware-specific definitions for
++ * Broadcom BCM47XX 10/100 Mbps Ethernet cores.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id$
++ */
+
-+ origidx = si->curidx;
++#ifndef _bcmenet_47xx_h_
++#define _bcmenet_47xx_h_
+
-+ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+ return;
++#include <bcmdevs.h>
++#include <hnddma.h>
+
-+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+ goto done;
++#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */
++#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */
++#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */
++#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */
+
-+ slowmaxfreq = slowfreq(sbh, TRUE);
-+ pll_on_delay = ((slowmaxfreq * PLL_DELAY) + 999999) / 1000000;
-+ fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
++/* power management event wakeup pattern constants */
++#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */
++#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */
++#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */
++#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */
++#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */
+
-+ W_REG(&cc->pll_on_delay, pll_on_delay);
-+ W_REG(&cc->fref_sel_delay, fref_sel_delay);
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif /* PAD */
+
-+ /* 4317pc does not work with SlowClock less than 5Mhz */
-+ if (si->bus == PCMCIA_BUS)
-+ SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (0 << SCC_CD_SHF));
++/* sometimes you just need the enet mib definitions */
++#include <bcmenetmib.h>
+
-+done:
-+ sb_setcoreidx(sbh, origidx);
-+}
++/*
++ * Host Interface Registers
++ */
++typedef volatile struct _bcmenettregs {
++ /* Device and Power Control */
++ uint32 devcontrol;
++ uint32 PAD[2];
++ uint32 biststatus;
++ uint32 wakeuplength;
++ uint32 PAD[3];
++
++ /* Interrupt Control */
++ uint32 intstatus;
++ uint32 intmask;
++ uint32 gptimer;
++ uint32 PAD[23];
+
-+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
-+uint16
-+sb_pwrctl_fast_pwrup_delay(void *sbh)
-+{
-+ sb_info_t *si;
-+ uint origidx;
-+ chipcregs_t *cc;
-+ uint slowminfreq;
-+ uint16 fpdelay;
-+ uint intr_val = 0;
++ /* Ethernet MAC Address Filtering Control */
++ uint32 PAD[2];
++ uint32 enetftaddr;
++ uint32 enetftdata;
++ uint32 PAD[2];
+
-+ si = SB_INFO(sbh);
-+ fpdelay = 0;
-+ origidx = si->curidx;
++ /* Ethernet MAC Control */
++ uint32 emactxmaxburstlen;
++ uint32 emacrxmaxburstlen;
++ uint32 emaccontrol;
++ uint32 emacflowcontrol;
+
-+ if (si->bus == SB_BUS)
-+ goto done;
++ uint32 PAD[20];
+
-+ INTR_OFF(si, intr_val);
++ /* DMA Lazy Interrupt Control */
++ uint32 intrecvlazy;
++ uint32 PAD[63];
+
-+ if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+ goto done;
++ /* DMA engine */
++ dmaregs_t dmaregs;
++ dmafifo_t dmafifo;
++ uint32 PAD[116];
+
-+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+ goto done;
++ /* EMAC Registers */
++ uint32 rxconfig;
++ uint32 rxmaxlength;
++ uint32 txmaxlength;
++ uint32 PAD;
++ uint32 mdiocontrol;
++ uint32 mdiodata;
++ uint32 emacintmask;
++ uint32 emacintstatus;
++ uint32 camdatalo;
++ uint32 camdatahi;
++ uint32 camcontrol;
++ uint32 enetcontrol;
++ uint32 txcontrol;
++ uint32 txwatermark;
++ uint32 mibcontrol;
++ uint32 PAD[49];
+
-+ slowminfreq = slowfreq(sbh, FALSE);
-+ fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
++ /* EMAC MIB counters */
++ bcmenetmib_t mib;
+
-+done:
-+ sb_setcoreidx(sbh, origidx);
-+ INTR_RESTORE(si, intr_val);
-+ return (fpdelay);
-+}
++ uint32 PAD[585];
+
-+/* turn primary xtal and/or pll off/on */
-+int
-+sb_pwrctl_xtal(void *sbh, uint what, bool on)
-+{
-+ sb_info_t *si;
-+ uint32 in, out, outen;
++ /* Sonics SiliconBackplane config registers */
++ sbconfig_t sbconfig;
++} bcmenetregs_t;
+
-+ si = SB_INFO(sbh);
-+
-+
-+ if (si->bus == PCMCIA_BUS) {
-+ return (0);
-+ }
-+
-+ if (si->bus != PCI_BUS)
-+ return (-1);
-+
-+ in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
-+ out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
-+ outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
-+
-+ /*
-+ * We can't actually read the state of the PLLPD so we infer it
-+ * by the value of XTAL_PU which *is* readable via gpioin.
-+ */
-+ if (on && (in & PCI_CFG_GPIO_XTAL))
-+ return (0);
-+
-+ if (what & XTAL)
-+ outen |= PCI_CFG_GPIO_XTAL;
-+ if (what & PLL)
-+ outen |= PCI_CFG_GPIO_PLL;
-+
-+ if (on) {
-+ /* turn primary xtal on */
-+ if (what & XTAL) {
-+ out |= PCI_CFG_GPIO_XTAL;
-+ if (what & PLL)
-+ out |= PCI_CFG_GPIO_PLL;
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
-+ OSL_DELAY(200);
-+ }
-+
-+ /* turn pll on */
-+ if (what & PLL) {
-+ out &= ~PCI_CFG_GPIO_PLL;
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+ OSL_DELAY(2000);
-+ }
-+ } else {
-+ if (what & XTAL)
-+ out &= ~PCI_CFG_GPIO_XTAL;
-+ if (what & PLL)
-+ out |= PCI_CFG_GPIO_PLL;
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+ OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
-+ }
-+
-+ return (0);
-+}
-+
-+/* set dynamic power control mode (forceslow, forcefast, dynamic) */
-+/* returns true if ignore pll off is set and false if it is not */
-+bool
-+sb_pwrctl_clk(void *sbh, uint mode)
-+{
-+ sb_info_t *si;
-+ uint origidx;
-+ chipcregs_t *cc;
-+ uint32 scc;
-+ bool forcefastclk=FALSE;
-+ uint intr_val = 0;
-+
-+ si = SB_INFO(sbh);
++/* device control */
++#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */
++#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */
++#define DC_ER ((uint32)1 << 15) /* ephy reset */
++#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */
++#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */
++#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */
++#define DC_PA_SHIFT 18
+
-+ /* chipcommon cores prior to rev6 don't support slowclkcontrol */
-+ if (si->ccrev < 6)
-+ return (FALSE);
++/* wakeup length */
++#define WL_P0_MASK 0x7f /* pattern 0 */
++#define WL_D0 ((uint32)1 << 7)
++#define WL_P1_MASK 0x7f00 /* pattern 1 */
++#define WL_P1_SHIFT 8
++#define WL_D1 ((uint32)1 << 15)
++#define WL_P2_MASK 0x7f0000 /* pattern 2 */
++#define WL_P2_SHIFT 16
++#define WL_D2 ((uint32)1 << 23)
++#define WL_P3_MASK 0x7f000000 /* pattern 3 */
++#define WL_P3_SHIFT 24
++#define WL_D3 ((uint32)1 << 31)
+
-+ INTR_OFF(si, intr_val);
++/* intstatus and intmask */
++#define I_PME ((uint32)1 << 6) /* power management event */
++#define I_TO ((uint32)1 << 7) /* general purpose timeout */
++#define I_PC ((uint32)1 << 10) /* descriptor error */
++#define I_PD ((uint32)1 << 11) /* data error */
++#define I_DE ((uint32)1 << 12) /* descriptor protocol error */
++#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */
++#define I_RO ((uint32)1 << 14) /* receive fifo overflow */
++#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */
++#define I_RI ((uint32)1 << 16) /* receive interrupt */
++#define I_XI ((uint32)1 << 24) /* transmit interrupt */
++#define I_EM ((uint32)1 << 26) /* emac interrupt */
++#define I_MW ((uint32)1 << 27) /* mii write */
++#define I_MR ((uint32)1 << 28) /* mii read */
+
-+ origidx = si->curidx;
++/* emaccontrol */
++#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */
++#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */
++#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */
++#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */
++#define EMC_LC_SHIFT 5
+
-+ cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
-+ ASSERT(cc != NULL);
++/* emacflowcontrol */
++#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */
++#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */
+
-+ if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+ goto done;
++/* interrupt receive lazy */
++#define IRL_TO_MASK 0x00ffffff /* timeout */
++#define IRL_FC_MASK 0xff000000 /* frame count */
++#define IRL_FC_SHIFT 24 /* frame count */
+
-+ switch (mode) {
-+ case CLK_FAST: /* force fast (pll) clock */
-+ /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
-+ sb_pwrctl_xtal(sbh, XTAL, ON);
++/* emac receive config */
++#define ERC_DB ((uint32)1 << 0) /* disable broadcast */
++#define ERC_AM ((uint32)1 << 1) /* accept all multicast */
++#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */
++#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */
++#define ERC_LE ((uint32)1 << 4) /* loopback enable */
++#define ERC_FE ((uint32)1 << 5) /* enable flow control */
++#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */
++#define ERC_RF ((uint32)1 << 7) /* reject filter */
+
-+ SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
-+ break;
++/* emac mdio control */
++#define MC_MF_MASK 0x7f /* mdc frequency */
++#define MC_PE ((uint32)1 << 7) /* mii preamble enable */
+
-+ case CLK_SLOW: /* force slow clock */
-+ if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS))
-+ return (-1);
++/* emac mdio data */
++#define MD_DATA_MASK 0xffff /* r/w data */
++#define MD_TA_MASK 0x30000 /* turnaround value */
++#define MD_TA_SHIFT 16
++#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */
++#define MD_RA_MASK 0x7c0000 /* register address */
++#define MD_RA_SHIFT 18
++#define MD_PMD_MASK 0xf800000 /* physical media device */
++#define MD_PMD_SHIFT 23
++#define MD_OP_MASK 0x30000000 /* opcode */
++#define MD_OP_SHIFT 28
++#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */
++#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */
++#define MD_SB_MASK 0xc0000000 /* start bits */
++#define MD_SB_SHIFT 30
++#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */
+
-+ if (si->ccrev >= 6)
-+ OR_REG(&cc->slow_clk_ctl, SCC_FS);
-+ break;
++/* emac intstatus and intmask */
++#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */
++#define EI_MIB ((uint32)1 << 1) /* mib interrupt */
++#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */
+
-+ case CLK_DYNAMIC: /* enable dynamic power control */
-+ scc = R_REG(&cc->slow_clk_ctl);
-+ scc &= ~(SCC_FS | SCC_IP | SCC_XC);
-+ if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
-+ scc |= SCC_XC;
-+ W_REG(&cc->slow_clk_ctl, scc);
++/* emac cam data high */
++#define CD_V ((uint32)1 << 16) /* valid bit */
+
-+ /* for dynamic control, we have to release our xtal_pu "force on" */
-+ if (scc & SCC_XC)
-+ sb_pwrctl_xtal(sbh, XTAL, OFF);
-+ break;
-+ }
-+
-+ /* Is the h/w forcing the use of the fast clk */
-+ forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
++/* emac cam control */
++#define CC_CE ((uint32)1 << 0) /* cam enable */
++#define CC_MS ((uint32)1 << 1) /* mask select */
++#define CC_RD ((uint32)1 << 2) /* read */
++#define CC_WR ((uint32)1 << 3) /* write */
++#define CC_INDEX_MASK 0x3f0000 /* index */
++#define CC_INDEX_SHIFT 16
++#define CC_CB ((uint32)1 << 31) /* cam busy */
+
-+done:
-+ sb_setcoreidx(sbh, origidx);
-+ INTR_RESTORE(si, intr_val);
-+ return (forcefastclk);
-+}
++/* emac ethernet control */
++#define EC_EE ((uint32)1 << 0) /* emac enable */
++#define EC_ED ((uint32)1 << 1) /* emac disable */
++#define EC_ES ((uint32)1 << 2) /* emac soft reset */
++#define EC_EP ((uint32)1 << 3) /* external phy select */
+
-+/* register driver interrupt disabling and restoring callback functions */
-+void
-+sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg)
-+{
-+ sb_info_t *si;
++/* emac transmit control */
++#define EXC_FD ((uint32)1 << 0) /* full duplex */
++#define EXC_FM ((uint32)1 << 1) /* flowmode */
++#define EXC_SB ((uint32)1 << 2) /* single backoff enable */
++#define EXC_SS ((uint32)1 << 3) /* small slottime */
+
-+ si = SB_INFO(sbh);
-+ si->intr_arg = intr_arg;
-+ si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
-+ si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
-+ /* save current core id. when this function called, the current core
-+ * must be the core which provides driver functions(il, et, wl, etc.)
-+ */
-+ si->dev_coreid = si->coreid[si->curidx];
-+}
++/* emac mib control */
++#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */
+
++/* sometimes you just need the enet rxheader definitions */
++#include <bcmenetrxh.h>
+
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h 2005-08-28 11:12:20.430859152 +0200
-@@ -0,0 +1,90 @@
++#endif /* _bcmenet_47xx_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h 2005-08-28 11:12:20.432858848 +0200
+@@ -0,0 +1,81 @@
+/*
-+ * BCM4710 address space map and definitions
-+ * Think twice before adding to this file, this is not the kitchen sink
-+ * These definitions are not guaranteed for all 47xx chips, only the 4710
-+ *
++ * Hardware-specific MIB definition for
++ * Broadcom Home Networking Division
++ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
++ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * $Id$
+ */
+
-+#ifndef _bcm4710_h_
-+#define _bcm4710_h_
-+
-+/* Address map */
-+#define BCM4710_SDRAM 0x00000000 /* Physical SDRAM */
-+#define BCM4710_PCI_MEM 0x08000000 /* Host Mode PCI memory access space (64 MB) */
-+#define BCM4710_PCI_CFG 0x0c000000 /* Host Mode PCI configuration space (64 MB) */
-+#define BCM4710_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
-+#define BCM4710_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
-+#define BCM4710_ENUM 0x18000000 /* Beginning of core enumeration space */
++#ifndef _bcmenetmib_h_
++#define _bcmenetmib_h_
+
-+/* Core register space */
-+#define BCM4710_REG_SDRAM 0x18000000 /* SDRAM core registers */
-+#define BCM4710_REG_ILINE20 0x18001000 /* InsideLine20 core registers */
-+#define BCM4710_REG_EMAC0 0x18002000 /* Ethernet MAC 0 core registers */
-+#define BCM4710_REG_CODEC 0x18003000 /* Codec core registers */
-+#define BCM4710_REG_USB 0x18004000 /* USB core registers */
-+#define BCM4710_REG_PCI 0x18005000 /* PCI core registers */
-+#define BCM4710_REG_MIPS 0x18006000 /* MIPS core registers */
-+#define BCM4710_REG_EXTIF 0x18007000 /* External Interface core registers */
-+#define BCM4710_REG_EMAC1 0x18008000 /* Ethernet MAC 1 core registers */
-+
-+#define BCM4710_EXTIF 0x1f000000 /* External Interface base address */
-+#define BCM4710_PCMCIA_MEM 0x1f000000 /* External Interface PCMCIA memory access */
-+#define BCM4710_PCMCIA_IO 0x1f100000 /* PCMCIA I/O access */
-+#define BCM4710_PCMCIA_CONF 0x1f200000 /* PCMCIA configuration */
-+#define BCM4710_PROG 0x1f800000 /* Programable interface */
-+#define BCM4710_FLASH 0x1fc00000 /* Flash */
-+
-+#define BCM4710_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
-+
-+#define BCM4710_UART (BCM4710_REG_EXTIF + 0x00000300)
-+
-+#define BCM4710_EUART (BCM4710_EXTIF + 0x00800000)
-+#define BCM4710_LED (BCM4710_EXTIF + 0x00900000)
-+
-+#define SBFLAG_PCI 0
-+#define SBFLAG_ENET0 1
-+#define SBFLAG_ILINE20 2
-+#define SBFLAG_CODEC 3
-+#define SBFLAG_USB 4
-+#define SBFLAG_EXTIF 5
-+#define SBFLAG_ENET1 6
-+
-+#ifdef CONFIG_HWSIM
-+#define BCM4710_TRACE(trval) do { *((int *)0xa0000f18) = (trval); } while (0)
-+#else
-+#define BCM4710_TRACE(trval)
-+#endif
-+
-+
-+/* BCM94702 CPCI -ExtIF used for LocalBus devs */
-+
-+#define BCM94702_CPCI_RESET_ADDR BCM4710_EXTIF
-+#define BCM94702_CPCI_BOARDID_ADDR (BCM4710_EXTIF | 0x4000)
-+#define BCM94702_CPCI_DOC_ADDR (BCM4710_EXTIF | 0x6000)
-+#define BCM94702_DOC_ADDR BCM94702_CPCI_DOC_ADDR
-+#define BCM94702_CPCI_LED_ADDR (BCM4710_EXTIF | 0xc000)
-+#define BCM94702_CPCI_NVRAM_ADDR (BCM4710_EXTIF | 0xe000)
-+#define BCM94702_CPCI_NVRAM_SIZE 0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-+#define BCM94702_CPCI_TOD_REG_BASE (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
-+
-+#define LED_REG(x) \
-+ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define _PADLINE(line) pad ## line
++#define _XSTR(line) _PADLINE(line)
++#define PAD _XSTR(__LINE__)
++#endif /* PAD */
+
-+/*
-+ * Reset function implemented in PLD. Read or write should trigger hard reset
++/*
++ * EMAC MIB Registers
+ */
-+#define SYS_HARD_RESET() \
-+ { for (;;) \
-+ *( (volatile unsigned char *)\
-+ KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
-+ }
++typedef volatile struct {
++ uint32 tx_good_octets;
++ uint32 tx_good_pkts;
++ uint32 tx_octets;
++ uint32 tx_pkts;
++ uint32 tx_broadcast_pkts;
++ uint32 tx_multicast_pkts;
++ uint32 tx_len_64;
++ uint32 tx_len_65_to_127;
++ uint32 tx_len_128_to_255;
++ uint32 tx_len_256_to_511;
++ uint32 tx_len_512_to_1023;
++ uint32 tx_len_1024_to_max;
++ uint32 tx_jabber_pkts;
++ uint32 tx_oversize_pkts;
++ uint32 tx_fragment_pkts;
++ uint32 tx_underruns;
++ uint32 tx_total_cols;
++ uint32 tx_single_cols;
++ uint32 tx_multiple_cols;
++ uint32 tx_excessive_cols;
++ uint32 tx_late_cols;
++ uint32 tx_defered;
++ uint32 tx_carrier_lost;
++ uint32 tx_pause_pkts;
++ uint32 PAD[8];
+
-+#endif /* _bcm4710_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h 2005-08-28 11:12:20.431859000 +0200
-@@ -0,0 +1,238 @@
++ uint32 rx_good_octets;
++ uint32 rx_good_pkts;
++ uint32 rx_octets;
++ uint32 rx_pkts;
++ uint32 rx_broadcast_pkts;
++ uint32 rx_multicast_pkts;
++ uint32 rx_len_64;
++ uint32 rx_len_65_to_127;
++ uint32 rx_len_128_to_255;
++ uint32 rx_len_256_to_511;
++ uint32 rx_len_512_to_1023;
++ uint32 rx_len_1024_to_max;
++ uint32 rx_jabber_pkts;
++ uint32 rx_oversize_pkts;
++ uint32 rx_fragment_pkts;
++ uint32 rx_missed_pkts;
++ uint32 rx_crc_align_errs;
++ uint32 rx_undersize;
++ uint32 rx_crc_errs;
++ uint32 rx_align_errs;
++ uint32 rx_symbol_errs;
++ uint32 rx_pause_pkts;
++ uint32 rx_nonpause_pkts;
++} bcmenetmib_t;
++
++#endif /* _bcmenetmib_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-08-28 11:12:20.433858696 +0200
+@@ -0,0 +1,43 @@
+/*
-+ * Broadcom device-specific manifest constants.
++ * Hardware-specific Receive Data Header for the
++ * Broadcom Home Networking Division
++ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
+ *
-+ * $Id$
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id$
+ */
+
-+#ifndef _BCMDEVS_H
-+#define _BCMDEVS_H
++#ifndef _bcmenetrxh_h_
++#define _bcmenetrxh_h_
+
++/*
++ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header
++ * with every frame consisting of
++ * 16bits of frame length, followed by
++ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined.
++ */
++typedef volatile struct {
++ uint16 len;
++ uint16 flags;
++ uint16 pad[12];
++} bcmenetrxh_t;
+
-+/* Known PCI vendor Id's */
-+#define VENDOR_EPIGRAM 0xfeda
-+#define VENDOR_BROADCOM 0x14e4
-+#define VENDOR_3COM 0x10b7
-+#define VENDOR_NETGEAR 0x1385
-+#define VENDOR_DIAMOND 0x1092
-+#define VENDOR_DELL 0x1028
-+#define VENDOR_HP 0x0e11
-+#define VENDOR_APPLE 0x106b
++#define RXHDR_LEN 28
+
-+/* PCI Device Id's */
-+#define BCM4210_DEVICE_ID 0x1072 /* never used */
-+#define BCM4211_DEVICE_ID 0x4211
-+#define BCM4230_DEVICE_ID 0x1086 /* never used */
-+#define BCM4231_DEVICE_ID 0x4231
++#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */
++#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */
++#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */
++#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */
++#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */
++#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */
++#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */
++#define RXF_CRC ((uint16)1 << 1) /* crc error */
++#define RXF_OV ((uint16)1 << 0) /* fifo overflow */
+
-+#define BCM4410_DEVICE_ID 0x4410 /* bcm44xx family pci iline */
-+#define BCM4430_DEVICE_ID 0x4430 /* bcm44xx family cardbus iline */
-+#define BCM4412_DEVICE_ID 0x4412 /* bcm44xx family pci enet */
-+#define BCM4432_DEVICE_ID 0x4432 /* bcm44xx family cardbus enet */
++#endif /* _bcmenetrxh_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-08-28 11:12:20.433858696 +0200
+@@ -0,0 +1,131 @@
++/*
++ * NVRAM variable manipulation
++ *
++ * $Copyright Open Broadcom Corporation$
++ *
++ * $Id: bcmnvram.h,v 1.1.1.1 2004/01/21 03:50:44 gigis Exp $
++ */
+
-+#define BCM3352_DEVICE_ID 0x3352 /* bcm3352 device id */
-+#define BCM3360_DEVICE_ID 0x3360 /* bcm3360 device id */
++#ifndef _bcmnvram_h_
++#define _bcmnvram_h_
+
-+#define EPI41210_DEVICE_ID 0xa0fa /* bcm4210 */
-+#define EPI41230_DEVICE_ID 0xa10e /* bcm4230 */
++#ifndef _LANGUAGE_ASSEMBLY
+
-+#define BCM47XX_ILINE_ID 0x4711 /* 47xx iline20 */
-+#define BCM47XX_V90_ID 0x4712 /* 47xx v90 codec */
-+#define BCM47XX_ENET_ID 0x4713 /* 47xx enet */
-+#define BCM47XX_EXT_ID 0x4714 /* 47xx external i/f */
-+#define BCM47XX_USB_ID 0x4715 /* 47xx usb */
-+#define BCM47XX_USBH_ID 0x4716 /* 47xx usb host */
-+#define BCM47XX_USBD_ID 0x4717 /* 47xx usb device */
-+#define BCM47XX_IPSEC_ID 0x4718 /* 47xx ipsec */
++#include <typedefs.h>
+
-+#define BCM4710_DEVICE_ID 0x4710 /* 4710 primary function 0 */
++struct nvram_header {
++ uint32 magic;
++ uint32 len;
++ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */
++ uint32 config_refresh; /* 0:15 config, 16:31 refresh */
++ uint32 config_ncdl; /* ncdl values for memc */
++};
+
-+#define BCM4610_DEVICE_ID 0x4610 /* 4610 primary function 0 */
-+#define BCM4610_ILINE_ID 0x4611 /* 4610 iline100 */
-+#define BCM4610_V90_ID 0x4612 /* 4610 v90 codec */
-+#define BCM4610_ENET_ID 0x4613 /* 4610 enet */
-+#define BCM4610_EXT_ID 0x4614 /* 4610 external i/f */
-+#define BCM4610_USB_ID 0x4615 /* 4610 usb */
++struct nvram_tuple {
++ char *name;
++ char *value;
++ struct nvram_tuple *next;
++};
+
-+#define BCM4402_DEVICE_ID 0x4402 /* 4402 primary function 0 */
-+#define BCM4402_ENET_ID 0x4402 /* 4402 enet */
-+#define BCM4402_V90_ID 0x4403 /* 4402 v90 codec */
++/*
++ * Initialize NVRAM access. May be unnecessary or undefined on certain
++ * platforms.
++ */
++extern int nvram_init(void *sbh);
+
-+#define BCM4301_DEVICE_ID 0x4301 /* 4301 primary function 0 */
-+#define BCM4301_D11B_ID 0x4301 /* 4301 802.11b */
++/*
++ * Disable NVRAM access. May be unnecessary or undefined on certain
++ * platforms.
++ */
++extern void nvram_exit(void);
+
-+#define BCM4307_DEVICE_ID 0x4307 /* 4307 primary function 0 */
-+#define BCM4307_V90_ID 0x4305 /* 4307 v90 codec */
-+#define BCM4307_ENET_ID 0x4306 /* 4307 enet */
-+#define BCM4307_D11B_ID 0x4307 /* 4307 802.11b */
++/*
++ * Get the value of an NVRAM variable. The pointer returned may be
++ * invalid after a set.
++ * @param name name of variable to get
++ * @return value of variable or NULL if undefined
++ */
++extern char * nvram_get(const char *name);
+
-+#define BCM4306_DEVICE_ID 0x4306 /* 4306 chipcommon chipid */
-+#define BCM4306_D11G_ID 0x4320 /* 4306 802.11g */
-+#define BCM4306_D11G_ID2 0x4325
-+#define BCM4306_D11A_ID 0x4321 /* 4306 802.11a */
-+#define BCM4306_UART_ID 0x4322 /* 4306 uart */
-+#define BCM4306_V90_ID 0x4323 /* 4306 v90 codec */
-+#define BCM4306_D11DUAL_ID 0x4324 /* 4306 dual A+B */
-+
-+#define BCM4309_PKG_ID 1 /* 4309 package id */
-+
-+#define BCM4303_D11B_ID 0x4303 /* 4303 802.11b */
-+#define BCM4303_PKG_ID 2 /* 4303 package id */
-+
-+#define BCM4310_DEVICE_ID 0x4310 /* 4310 chipcommon chipid */
-+#define BCM4310_D11B_ID 0x4311 /* 4310 802.11b */
-+#define BCM4310_UART_ID 0x4312 /* 4310 uart */
-+#define BCM4310_ENET_ID 0x4313 /* 4310 enet */
-+#define BCM4310_USB_ID 0x4315 /* 4310 usb */
++/*
++ * Get the value of an NVRAM variable.
++ * @param name name of variable to get
++ * @return value of variable or NUL if undefined
++ */
++#define nvram_safe_get(name) (nvram_get(name) ? : "")
+
-+#define BCM4704_DEVICE_ID 0x4704 /* 4704 chipcommon chipid */
-+#define BCM4704_ENET_ID 0x4706 /* 4704 enet (Use 47XX_ENET_ID instead!) */
++/*
++ * Match an NVRAM variable.
++ * @param name name of variable to match
++ * @param match value to compare against value of variable
++ * @return TRUE if variable is defined and its value is string equal
++ * to match or FALSE otherwise
++ */
++static INLINE int
++nvram_match(char *name, char *match) {
++ const char *value = nvram_get(name);
++ return (value && !strcmp(value, match));
++}
+
-+#define BCM4317_DEVICE_ID 0x4317 /* 4317 chip common chipid */
++/*
++ * Inversely match an NVRAM variable.
++ * @param name name of variable to match
++ * @param match value to compare against value of variable
++ * @return TRUE if variable is defined and its value is not string
++ * equal to invmatch or FALSE otherwise
++ */
++static INLINE int
++nvram_invmatch(char *name, char *invmatch) {
++ const char *value = nvram_get(name);
++ return (value && strcmp(value, invmatch));
++}
+
-+#define BCM4712_DEVICE_ID 0x4712 /* 4712 chipcommon chipid */
-+#define BCM4712_MIPS_ID 0x4720 /* 4712 base devid */
-+#define BCM4712SMALL_PKG_ID 1 /* 200pin 4712 package id */
++/*
++ * Set the value of an NVRAM variable. The name and value strings are
++ * copied into private storage. Pointers to previously set values
++ * may become invalid. The new value may be immediately
++ * retrieved but will not be permanently stored until a commit.
++ * @param name name of variable to set
++ * @param value value of variable
++ * @return 0 on success and errno on failure
++ */
++extern int nvram_set(const char *name, const char *value);
+
-+#define SDIOH_FPGA_ID 0x4380 /* sdio host fpga */
++/*
++ * Unset an NVRAM variable. Pointers to previously set values
++ * remain valid until a set.
++ * @param name name of variable to unset
++ * @return 0 on success and errno on failure
++ * NOTE: use nvram_commit to commit this change to flash.
++ */
++extern int nvram_unset(const char *name);
+
-+#define BCM5365_DEVICE_ID 0x5365 /* 5365 chipcommon chipid */
++/*
++ * Commit NVRAM variables to permanent storage. All pointers to values
++ * may be invalid after a commit.
++ * NVRAM values are undefined after a commit.
++ * @return 0 on success and errno on failure
++ */
++extern int nvram_commit(void);
+
++/*
++ * Get all NVRAM variables (format name=value\0 ... \0\0).
++ * @param buf buffer to store variables
++ * @param count size of buffer in bytes
++ * @return 0 on success and errno on failure
++ */
++extern int nvram_getall(char *buf, int count);
+
-+/* PCMCIA vendor Id's */
++extern int kernel_write(unsigned char *buffer, int offset, int length);
+
-+#define VENDOR_BROADCOM_PCMCIA 0x02d0
++#endif /* _LANGUAGE_ASSEMBLY */
+
-+/* SDIO vendor Id's */
-+#define VENDOR_BROADCOM_SDIO 0x00BF
++#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */
++#define NVRAM_VERSION 1
++#define NVRAM_HEADER_SIZE 20
++#define NVRAM_LOC_GAP 0x100000
++#define NVRAM_SPACE 0x2000
++#define NVRAM_FIRST_LOC (0xbfd00000 - NVRAM_SPACE)
++#define NVRAM_LAST_LOC (0xc0000000 - NVRAM_SPACE)
+
++#endif /* _bcmnvram_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-08-28 11:12:20.433858696 +0200
+@@ -0,0 +1,24 @@
++/*
++ * Misc useful routines to access NIC srom
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
+
-+/* boardflags */
-+#define BFL_BTCOEXIST 0x0001 /* This board implements Bluetooth coexistance */
-+#define BFL_PACTRL 0x0002 /* This board has gpio 9 controlling the PA */
-+#define BFL_AIRLINEMODE 0x0004 /* This board implements gpio13 radio disable indication */
-+#define BFL_ENETSPI 0x0010 /* This board has ephy roboswitch spi */
-+#define BFL_CCKHIPWR 0x0040 /* Can do high-power CCK transmission */
-+#define BFL_ENETADM 0x0080 /* This board has ADMtek switch */
-+#define BFL_ENETVLAN 0x0100 /* This board can do vlan */
++#ifndef _bcmsrom_h_
++#define _bcmsrom_h_
+
-+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-+#define BOARD_GPIO_HWRAD_B 0x010 /* bit 4 is HWRAD input on 4301 */
-+#define BOARD_GPIO_BTC_IN 0x080 /* bit 7 is BT Coexistance Input */
-+#define BOARD_GPIO_BTC_OUT 0x100 /* bit 8 is BT Coexistance Out */
-+#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
-+#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
-+#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
-+#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
-+#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
++extern int srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count);
+
-+/* Bus types */
-+#define SB_BUS 0 /* Silicon Backplane */
-+#define PCI_BUS 1 /* PCI target */
-+#define PCMCIA_BUS 2 /* PCMCIA target */
-+#define SDIO_BUS 3 /* SDIO target */
++extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
++extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
++extern int srom_parsecis(uint8 *cis, char **vars, int *count);
++
++#endif /* _bcmsrom_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h 2005-08-28 11:12:20.435858392 +0200
+@@ -0,0 +1,136 @@
++/*
++ * Misc useful os-independent macros and functions.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id$
++ */
+
-+/* Reference Board Types */
++#ifndef _bcmutils_h_
++#define _bcmutils_h_
+
-+#define BU4710_BOARD 0x0400
-+#define VSIM4710_BOARD 0x0401
-+#define QT4710_BOARD 0x0402
++#ifndef MIN
++#define MIN(a, b) (((a)<(b))?(a):(b))
++#endif
+
-+#define BU4610_BOARD 0x0403
-+#define VSIM4610_BOARD 0x0404
++#ifndef MAX
++#define MAX(a, b) (((a)>(b))?(a):(b))
++#endif
+
-+#define BU4307_BOARD 0x0405
-+#define BCM94301CB_BOARD 0x0406
-+#define BCM94301PC_BOARD 0x0406 /* Pcmcia 5v card */
-+#define BCM94301MP_BOARD 0x0407
-+#define BCM94307MP_BOARD 0x0408
-+#define BCMAP4307_BOARD 0x0409
++#define CEIL(x, y) (((x) + ((y)-1)) / (y))
++#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y))
++#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0)
++#define ISPOWEROF2(x) ((((x)-1)&(x))==0)
++#define OFFSETOF(type, member) ((uint) &((type *)0)->member)
++#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
+
-+#define BU4309_BOARD 0x040a
-+#define BCM94309CB_BOARD 0x040b
-+#define BCM94309MP_BOARD 0x040c
-+#define BCM4309AP_BOARD 0x040d
++/* bit map related macros */
++#ifndef setbit
++#define NBBY 8 /* 8 bits per byte */
++#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
++#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
++#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
++#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
++#endif
+
-+#define BCM94302MP_BOARD 0x040e
++#define NBITS(type) (sizeof (type) * 8)
+
-+#define VSIM4310_BOARD 0x040f
-+#define BU4711_BOARD 0x0410
-+#define BCM94310U_BOARD 0x0411
-+#define BCM94310AP_BOARD 0x0412
-+#define BCM94310MP_BOARD 0x0414
++#define _BCM_U 0x01 /* upper */
++#define _BCM_L 0x02 /* lower */
++#define _BCM_D 0x04 /* digit */
++#define _BCM_C 0x08 /* cntrl */
++#define _BCM_P 0x10 /* punct */
++#define _BCM_S 0x20 /* white space (space/lf/tab) */
++#define _BCM_X 0x40 /* hex digit */
++#define _BCM_SP 0x80 /* hard space (0x20) */
+
-+#define BU4306_BOARD 0x0416
-+#define BCM94306CB_BOARD 0x0417
-+#define BCM94306MP_BOARD 0x0418
++extern unsigned char bcm_ctype[];
++#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
+
-+#define BCM94710D_BOARD 0x041a
-+#define BCM94710R1_BOARD 0x041b
-+#define BCM94710R4_BOARD 0x041c
-+#define BCM94710AP_BOARD 0x041d
++#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
++#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
++#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0)
++#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0)
++#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
++#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0)
++#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
++#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0)
++#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0)
++#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0)
++#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
+
++/*
++ * Spin at most 'us' microseconds while 'exp' is true.
++ * Caller should explicitly test 'exp' when this completes
++ * and take appropriate error action if 'exp' is still true.
++ */
++#define SPINWAIT(exp, us) { \
++ uint countdown = (us) + 9; \
++ while ((exp) && (countdown >= 10)) {\
++ OSL_DELAY(10); \
++ countdown -= 10; \
++ } \
++}
+
-+#define BU2050_BOARD 0x041f
-+
-+
-+#define BCM94309G_BOARD 0x0421
-+
-+#define BCM94301PC3_BOARD 0x0422 /* Pcmcia 3.3v card */
-+
-+#define BU4704_BOARD 0x0423
-+#define BU4702_BOARD 0x0424
-+
-+#define BCM94306PC_BOARD 0x0425 /* pcmcia 3.3v 4306 card */
-+
-+#define BU4317_BOARD 0x0426
-+
-+
-+#define BCM94702MN_BOARD 0x0428
-+
-+/* BCM4702 1U CompactPCI Board */
-+#define BCM94702CPCI_BOARD 0x0429
-+
-+/* BCM4702 with BCM95380 VLAN Router */
-+#define BCM95380RR_BOARD 0x042a
-+
-+/* cb4306 with SiGe PA */
-+#define BCM94306CBSG_BOARD 0x042b
-+
-+/* mp4301 with 2050 radio */
-+#define BCM94301MPL_BOARD 0x042c
-+
-+/* cb4306 with SiGe PA */
-+#define PCSG94306_BOARD 0x042d
-+
-+/* bu4704 with sdram */
-+#define BU4704SD_BOARD 0x042e
-+
-+/* Dual 11a/11g Router */
-+#define BCM94704AGR_BOARD 0x042f
-+
-+/* 11a-only minipci */
-+#define BCM94308MP_BOARD 0x0430
++/* generic osl packet queue */
++struct pktq {
++ void *head;
++ void *tail;
++ uint len;
++ uint maxlen;
++};
++#define DEFAULT_QLEN 128
+
++#define pktq_len(q) ((q)->len)
++#define pktq_avail(q) ((q)->maxlen - (q)->len)
++#define pktq_head(q) ((q)->head)
++#define pktq_full(q) ((q)->len >= (q)->maxlen)
+
++/* crc defines */
++#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
++#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
++#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
++#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
+
-+/* BCM94317 boards */
-+#define BCM94317CB_BOARD 0x0440
-+#define BCM94317MP_BOARD 0x0441
-+#define BCM94317PCMCIA_BOARD 0x0442
-+#define BCM94317SDIO_BOARD 0x0443
++/* tag_ID/length/value_buffer tuple */
++typedef struct bcm_tlv {
++ uint8 id;
++ uint8 len;
++ uint8 data[1];
++} bcm_tlv_t;
+
-+#define BU4712_BOARD 0x0444
++/* externs */
++extern uint bcm_atoi(char *s);
++extern uchar bcm_toupper(uchar c);
++extern ulong bcm_strtoul(char *cp, char **endp, uint base);
++extern void deadbeef(char *p, uint len);
++extern void prhex(char *msg, uchar *buf, uint len);
++extern void prpkt(char *msg, void *drv, void *p0);
++extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf);
++extern uint pkttotlen(void *drv, void *);
++extern uchar *bcm_ether_ntoa(char *ea, char *buf);
++extern int bcm_ether_atoe(char *p, char *ea);
++extern void bcm_mdelay(uint ms);
++extern char *getvar(char *vars, char *name);
++extern int getintvar(char *vars, char *name);
+
-+/* BCM4712 boards */
-+#define BCM94712AGR_BOARD 0x0445
-+#define BCM94712AP_BOARD 0x0446
++extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc);
++extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc);
++extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc);
++extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
++extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
++extern void pktqinit(struct pktq *q, int maxlen);
++extern void pktenq(struct pktq *q, void *p, bool lifo);
++extern void *pktdeq(struct pktq *q);
+
-+/* BCM4702 boards */
-+#define CT4702AP_BOARD 0x0447
++#define bcmlog(fmt, a1, a2)
++#define bcmdumplog(buf, size) *buf = '\0'
+
-+#endif /* _BCMDEVS_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h 2005-08-28 11:12:20.431859000 +0200
-@@ -0,0 +1,125 @@
-+/*******************************************************************************
-+ * $Id$
++#endif /* _bcmutils_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h 2005-08-28 11:12:20.435858392 +0200
+@@ -0,0 +1,85 @@
++/*
++ * bit manipulation utility functions
++ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * local version of endian.h - byte order defines
-+ ******************************************************************************/
++ * $Id$
++ */
+
-+#ifndef _BCMENDIAN_H_
-+#define _BCMENDIAN_H_
++#ifndef _BITFUNCS_H
++#define _BITFUNCS_H
+
+#include <typedefs.h>
+
-+/* Byte swap a 16 bit value */
-+#define BCMSWAP16(val) \
-+ ((uint16)( \
-+ (((uint16)(val) & (uint16)0x00ffU) << 8) | \
-+ (((uint16)(val) & (uint16)0xff00U) >> 8) ))
-+
-+/* Byte swap a 32 bit value */
-+#define BCMSWAP32(val) \
-+ ((uint32)( \
-+ (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
-+ (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \
-+ (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \
-+ (((uint32)(val) & (uint32)0xff000000UL) >> 24) ))
++/* local prototypes */
++static INLINE uint32 find_msbit(uint32 x);
+
-+static INLINE uint16
-+bcmswap16(uint16 val)
-+{
-+ return BCMSWAP16(val);
-+}
+
-+static INLINE uint32
-+bcmswap32(uint32 val)
-+{
-+ return BCMSWAP32(val);
-+}
++/*
++ * find_msbit: returns index of most significant set bit in x, with index
++ * range defined as 0-31. NOTE: returns zero if input is zero.
++ */
+
-+/* buf - start of buffer of shorts to swap */
-+/* len - byte length of buffer */
-+static INLINE void
-+bcmswap16_buf(uint16 *buf, uint len)
-+{
-+ len = len/2;
++#if defined(USE_PENTIUM_BSR) && defined(__GNUC__)
+
-+ while(len--){
-+ *buf = bcmswap16(*buf);
-+ buf++;
-+ }
++/*
++ * Implementation for Pentium processors and gcc. Note that this
++ * instruction is actually very slow on some processors (e.g., family 5,
++ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic
++ * implementation instead.
++ */
++static INLINE uint32 find_msbit(uint32 x)
++{
++ uint msbit;
++ __asm__("bsrl %1,%0"
++ :"=r" (msbit)
++ :"r" (x));
++ return msbit;
+}
+
-+#ifndef hton16
-+#ifndef IL_BIGENDIAN
-+#define HTON16(i) BCMSWAP16(i)
-+#define hton16(i) bcmswap16(i)
-+#define hton32(i) bcmswap32(i)
-+#define ntoh16(i) bcmswap16(i)
-+#define ntoh32(i) bcmswap32(i)
-+#define ltoh16(i) (i)
-+#define ltoh32(i) (i)
-+#define htol16(i) (i)
-+#define htol32(i) (i)
-+#else
-+#define HTON16(i) (i)
-+#define hton16(i) (i)
-+#define hton32(i) (i)
-+#define ntoh16(i) (i)
-+#define ntoh32(i) (i)
-+#define ltoh16(i) bcmswap16(i)
-+#define ltoh32(i) bcmswap32(i)
-+#define htol16(i) bcmswap16(i)
-+#define htol32(i) bcmswap32(i)
-+#endif
-+#endif
-+
-+#ifndef IL_BIGENDIAN
-+#define ltoh16_buf(buf, i)
-+#define htol16_buf(buf, i)
+#else
-+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#endif
+
+/*
-+* load 16-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint16
-+ltoh16_ua(uint8 *bytes)
-+{
-+ return (bytes[1]<<8)+bytes[0];
-+}
++ * Generic Implementation
++ */
+
-+/*
-+* load 32-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint32
-+ltoh32_ua(uint8 *bytes)
-+{
-+ return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0];
-+}
++#define DB_POW_MASK16 0xffff0000
++#define DB_POW_MASK8 0x0000ff00
++#define DB_POW_MASK4 0x000000f0
++#define DB_POW_MASK2 0x0000000c
++#define DB_POW_MASK1 0x00000002
+
-+/*
-+* load 16-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint16
-+ntoh16_ua(uint8 *bytes)
++static INLINE uint32 find_msbit(uint32 x)
+{
-+ return (bytes[0]<<8)+bytes[1];
++ uint32 temp_x = x;
++ uint msbit = 0;
++ if (temp_x & DB_POW_MASK16) {
++ temp_x >>= 16;
++ msbit = 16;
++ }
++ if (temp_x & DB_POW_MASK8) {
++ temp_x >>= 8;
++ msbit += 8;
++ }
++ if (temp_x & DB_POW_MASK4) {
++ temp_x >>= 4;
++ msbit += 4;
++ }
++ if (temp_x & DB_POW_MASK2) {
++ temp_x >>= 2;
++ msbit += 2;
++ }
++ if (temp_x & DB_POW_MASK1) {
++ msbit += 1;
++ }
++ return(msbit);
+}
+
-+/*
-+* load 32-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint32
-+ntoh32_ua(uint8 *bytes)
-+{
-+ return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3];
-+}
++#endif
+
-+#endif /* _BCMENDIAN_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h 2005-08-28 11:12:20.432858848 +0200
-@@ -0,0 +1,229 @@
++#endif /* _BITFUNCS_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h 2005-08-28 11:12:20.435858392 +0200
+@@ -0,0 +1,69 @@
+/*
-+ * Hardware-specific definitions for
-+ * Broadcom BCM47XX 10/100 Mbps Ethernet cores.
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
-+ */
++ *
++*/
+
-+#ifndef _bcmenet_47xx_h_
-+#define _bcmenet_47xx_h_
++#ifndef _epivers_h_
++#define _epivers_h_
+
-+#include <bcmdevs.h>
-+#include <hnddma.h>
++#ifdef linux
++#include <linux/config.h>
++#endif
+
-+#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */
-+#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */
-+#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */
-+#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */
++/* Vendor Name, ASCII, 32 chars max */
++#ifdef COMPANYNAME
++#define HPNA_VENDOR COMPANYNAME
++#else
++#define HPNA_VENDOR "Broadcom Corporation"
++#endif
+
-+/* power management event wakeup pattern constants */
-+#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */
-+#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */
-+#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */
-+#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */
-+#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */
++/* Driver Date, ASCII, 32 chars max */
++#define HPNA_DRV_BUILD_DATE __DATE__
+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define _PADLINE(line) pad ## line
-+#define _XSTR(line) _PADLINE(line)
-+#define PAD _XSTR(__LINE__)
-+#endif /* PAD */
++/* Hardware Manufacture Date, ASCII, 32 chars max */
++#define HPNA_HW_MFG_DATE "Not Specified"
+
-+/* sometimes you just need the enet mib definitions */
-+#include <bcmenetmib.h>
++/* See documentation for Device Type values, 32 values max */
++#ifndef HPNA_DEV_TYPE
+
-+/*
-+ * Host Interface Registers
-+ */
-+typedef volatile struct _bcmenettregs {
-+ /* Device and Power Control */
-+ uint32 devcontrol;
-+ uint32 PAD[2];
-+ uint32 biststatus;
-+ uint32 wakeuplength;
-+ uint32 PAD[3];
-+
-+ /* Interrupt Control */
-+ uint32 intstatus;
-+ uint32 intmask;
-+ uint32 gptimer;
-+ uint32 PAD[23];
++#if defined(CONFIG_BRCM_VJ)
++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY }
+
-+ /* Ethernet MAC Address Filtering Control */
-+ uint32 PAD[2];
-+ uint32 enetftaddr;
-+ uint32 enetftdata;
-+ uint32 PAD[2];
++#elif defined(CONFIG_BCRM_93725)
++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
+
-+ /* Ethernet MAC Control */
-+ uint32 emactxmaxburstlen;
-+ uint32 emacrxmaxburstlen;
-+ uint32 emaccontrol;
-+ uint32 emacflowcontrol;
++#else
++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC }
+
-+ uint32 PAD[20];
++#endif
+
-+ /* DMA Lazy Interrupt Control */
-+ uint32 intrecvlazy;
-+ uint32 PAD[63];
++#endif /* !HPNA_DEV_TYPE */
+
-+ /* DMA engine */
-+ dmaregs_t dmaregs;
-+ dmafifo_t dmafifo;
-+ uint32 PAD[116];
+
-+ /* EMAC Registers */
-+ uint32 rxconfig;
-+ uint32 rxmaxlength;
-+ uint32 txmaxlength;
-+ uint32 PAD;
-+ uint32 mdiocontrol;
-+ uint32 mdiodata;
-+ uint32 emacintmask;
-+ uint32 emacintstatus;
-+ uint32 camdatalo;
-+ uint32 camdatahi;
-+ uint32 camcontrol;
-+ uint32 enetcontrol;
-+ uint32 txcontrol;
-+ uint32 txwatermark;
-+ uint32 mibcontrol;
-+ uint32 PAD[49];
++#define EPI_MAJOR_VERSION 1
+
-+ /* EMAC MIB counters */
-+ bcmenetmib_t mib;
++#define EPI_MINOR_VERSION 1
+
-+ uint32 PAD[585];
++#define EPI_RC_NUMBER 2
+
-+ /* Sonics SiliconBackplane config registers */
-+ sbconfig_t sbconfig;
-+} bcmenetregs_t;
++#define EPI_INCREMENTAL_NUMBER 0
+
-+/* device control */
-+#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */
-+#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */
-+#define DC_ER ((uint32)1 << 15) /* ephy reset */
-+#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */
-+#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */
-+#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */
-+#define DC_PA_SHIFT 18
++#define EPI_BUILD_NUMBER 0
+
-+/* wakeup length */
-+#define WL_P0_MASK 0x7f /* pattern 0 */
-+#define WL_D0 ((uint32)1 << 7)
-+#define WL_P1_MASK 0x7f00 /* pattern 1 */
-+#define WL_P1_SHIFT 8
-+#define WL_D1 ((uint32)1 << 15)
-+#define WL_P2_MASK 0x7f0000 /* pattern 2 */
-+#define WL_P2_SHIFT 16
-+#define WL_D2 ((uint32)1 << 23)
-+#define WL_P3_MASK 0x7f000000 /* pattern 3 */
-+#define WL_P3_SHIFT 24
-+#define WL_D3 ((uint32)1 << 31)
++#define EPI_VERSION 1,1,2,0
+
-+/* intstatus and intmask */
-+#define I_PME ((uint32)1 << 6) /* power management event */
-+#define I_TO ((uint32)1 << 7) /* general purpose timeout */
-+#define I_PC ((uint32)1 << 10) /* descriptor error */
-+#define I_PD ((uint32)1 << 11) /* data error */
-+#define I_DE ((uint32)1 << 12) /* descriptor protocol error */
-+#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */
-+#define I_RO ((uint32)1 << 14) /* receive fifo overflow */
-+#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */
-+#define I_RI ((uint32)1 << 16) /* receive interrupt */
-+#define I_XI ((uint32)1 << 24) /* transmit interrupt */
-+#define I_EM ((uint32)1 << 26) /* emac interrupt */
-+#define I_MW ((uint32)1 << 27) /* mii write */
-+#define I_MR ((uint32)1 << 28) /* mii read */
++#define EPI_VERSION_NUM 0x01010200
+
-+/* emaccontrol */
-+#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */
-+#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */
-+#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */
-+#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */
-+#define EMC_LC_SHIFT 5
++/* Driver Version String, ASCII, 32 chars max */
++#define EPI_VERSION_STR "1.1.2.0"
++#define EPI_ROUTER_VERSION_STR "1.1.2.0"
+
-+/* emacflowcontrol */
-+#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */
-+#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */
++#endif /* _epivers_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in 2005-08-28 11:12:20.436858240 +0200
+@@ -0,0 +1,69 @@
++/*
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ *
++*/
+
-+/* interrupt receive lazy */
-+#define IRL_TO_MASK 0x00ffffff /* timeout */
-+#define IRL_FC_MASK 0xff000000 /* frame count */
-+#define IRL_FC_SHIFT 24 /* frame count */
++#ifndef _epivers_h_
++#define _epivers_h_
+
-+/* emac receive config */
-+#define ERC_DB ((uint32)1 << 0) /* disable broadcast */
-+#define ERC_AM ((uint32)1 << 1) /* accept all multicast */
-+#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */
-+#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */
-+#define ERC_LE ((uint32)1 << 4) /* loopback enable */
-+#define ERC_FE ((uint32)1 << 5) /* enable flow control */
-+#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */
-+#define ERC_RF ((uint32)1 << 7) /* reject filter */
++#ifdef linux
++#include <linux/config.h>
++#endif
+
-+/* emac mdio control */
-+#define MC_MF_MASK 0x7f /* mdc frequency */
-+#define MC_PE ((uint32)1 << 7) /* mii preamble enable */
++/* Vendor Name, ASCII, 32 chars max */
++#ifdef COMPANYNAME
++#define HPNA_VENDOR COMPANYNAME
++#else
++#define HPNA_VENDOR "Broadcom Corporation"
++#endif
+
-+/* emac mdio data */
-+#define MD_DATA_MASK 0xffff /* r/w data */
-+#define MD_TA_MASK 0x30000 /* turnaround value */
-+#define MD_TA_SHIFT 16
-+#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */
-+#define MD_RA_MASK 0x7c0000 /* register address */
-+#define MD_RA_SHIFT 18
-+#define MD_PMD_MASK 0xf800000 /* physical media device */
-+#define MD_PMD_SHIFT 23
-+#define MD_OP_MASK 0x30000000 /* opcode */
-+#define MD_OP_SHIFT 28
-+#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */
-+#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */
-+#define MD_SB_MASK 0xc0000000 /* start bits */
-+#define MD_SB_SHIFT 30
-+#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */
++/* Driver Date, ASCII, 32 chars max */
++#define HPNA_DRV_BUILD_DATE __DATE__
+
-+/* emac intstatus and intmask */
-+#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */
-+#define EI_MIB ((uint32)1 << 1) /* mib interrupt */
-+#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */
++/* Hardware Manufacture Date, ASCII, 32 chars max */
++#define HPNA_HW_MFG_DATE "Not Specified"
+
-+/* emac cam data high */
-+#define CD_V ((uint32)1 << 16) /* valid bit */
++/* See documentation for Device Type values, 32 values max */
++#ifndef HPNA_DEV_TYPE
+
-+/* emac cam control */
-+#define CC_CE ((uint32)1 << 0) /* cam enable */
-+#define CC_MS ((uint32)1 << 1) /* mask select */
-+#define CC_RD ((uint32)1 << 2) /* read */
-+#define CC_WR ((uint32)1 << 3) /* write */
-+#define CC_INDEX_MASK 0x3f0000 /* index */
-+#define CC_INDEX_SHIFT 16
-+#define CC_CB ((uint32)1 << 31) /* cam busy */
++#if defined(CONFIG_BRCM_VJ)
++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY }
+
-+/* emac ethernet control */
-+#define EC_EE ((uint32)1 << 0) /* emac enable */
-+#define EC_ED ((uint32)1 << 1) /* emac disable */
-+#define EC_ES ((uint32)1 << 2) /* emac soft reset */
-+#define EC_EP ((uint32)1 << 3) /* external phy select */
++#elif defined(CONFIG_BCRM_93725)
++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
+
-+/* emac transmit control */
-+#define EXC_FD ((uint32)1 << 0) /* full duplex */
-+#define EXC_FM ((uint32)1 << 1) /* flowmode */
-+#define EXC_SB ((uint32)1 << 2) /* single backoff enable */
-+#define EXC_SS ((uint32)1 << 3) /* small slottime */
++#else
++#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC }
+
-+/* emac mib control */
-+#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */
++#endif
+
-+/* sometimes you just need the enet rxheader definitions */
-+#include <bcmenetrxh.h>
++#endif /* !HPNA_DEV_TYPE */
+
-+#endif /* _bcmenet_47xx_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h 2005-08-28 11:12:20.432858848 +0200
-@@ -0,0 +1,81 @@
++
++#define EPI_MAJOR_VERSION @EPI_MAJOR_VERSION@
++
++#define EPI_MINOR_VERSION @EPI_MINOR_VERSION@
++
++#define EPI_RC_NUMBER @EPI_RC_NUMBER@
++
++#define EPI_INCREMENTAL_NUMBER @EPI_INCREMENTAL_NUMBER@
++
++#define EPI_BUILD_NUMBER @EPI_BUILD_NUMBER@
++
++#define EPI_VERSION @EPI_VERSION@
++
++#define EPI_VERSION_NUM @EPI_VERSION_NUM@
++
++/* Driver Version String, ASCII, 32 chars max */
++#define EPI_VERSION_STR "@EPI_VERSION_STR@"
++#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@"
++
++#endif /* _epivers_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h 2005-08-28 11:12:20.436858240 +0200
+@@ -0,0 +1,60 @@
+/*
-+ * Hardware-specific MIB definition for
-+ * Broadcom Home Networking Division
-+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
-+ *
++ * Driver-specific socket ioctls
++ * used by BSD, Linux, and PSOS
++ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver
++ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
+ * $Id$
+ */
+
-+#ifndef _bcmenetmib_h_
-+#define _bcmenetmib_h_
++#ifndef _etsockio_h_
++#define _etsockio_h_
+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define _PADLINE(line) pad ## line
-+#define _XSTR(line) _PADLINE(line)
-+#define PAD _XSTR(__LINE__)
-+#endif /* PAD */
++/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */
+
-+/*
-+ * EMAC MIB Registers
-+ */
-+typedef volatile struct {
-+ uint32 tx_good_octets;
-+ uint32 tx_good_pkts;
-+ uint32 tx_octets;
-+ uint32 tx_pkts;
-+ uint32 tx_broadcast_pkts;
-+ uint32 tx_multicast_pkts;
-+ uint32 tx_len_64;
-+ uint32 tx_len_65_to_127;
-+ uint32 tx_len_128_to_255;
-+ uint32 tx_len_256_to_511;
-+ uint32 tx_len_512_to_1023;
-+ uint32 tx_len_1024_to_max;
-+ uint32 tx_jabber_pkts;
-+ uint32 tx_oversize_pkts;
-+ uint32 tx_fragment_pkts;
-+ uint32 tx_underruns;
-+ uint32 tx_total_cols;
-+ uint32 tx_single_cols;
-+ uint32 tx_multiple_cols;
-+ uint32 tx_excessive_cols;
-+ uint32 tx_late_cols;
-+ uint32 tx_defered;
-+ uint32 tx_carrier_lost;
-+ uint32 tx_pause_pkts;
-+ uint32 PAD[8];
+
-+ uint32 rx_good_octets;
-+ uint32 rx_good_pkts;
-+ uint32 rx_octets;
-+ uint32 rx_pkts;
-+ uint32 rx_broadcast_pkts;
-+ uint32 rx_multicast_pkts;
-+ uint32 rx_len_64;
-+ uint32 rx_len_65_to_127;
-+ uint32 rx_len_128_to_255;
-+ uint32 rx_len_256_to_511;
-+ uint32 rx_len_512_to_1023;
-+ uint32 rx_len_1024_to_max;
-+ uint32 rx_jabber_pkts;
-+ uint32 rx_oversize_pkts;
-+ uint32 rx_fragment_pkts;
-+ uint32 rx_missed_pkts;
-+ uint32 rx_crc_align_errs;
-+ uint32 rx_undersize;
-+ uint32 rx_crc_errs;
-+ uint32 rx_align_errs;
-+ uint32 rx_symbol_errs;
-+ uint32 rx_pause_pkts;
-+ uint32 rx_nonpause_pkts;
-+} bcmenetmib_t;
++#if defined(linux)
++#define SIOCSETCUP (SIOCDEVPRIVATE + 0)
++#define SIOCSETCDOWN (SIOCDEVPRIVATE + 1)
++#define SIOCSETCLOOP (SIOCDEVPRIVATE + 2)
++#define SIOCGETCDUMP (SIOCDEVPRIVATE + 3)
++#define SIOCSETCSETMSGLEVEL (SIOCDEVPRIVATE + 4)
++#define SIOCSETCPROMISC (SIOCDEVPRIVATE + 5)
++#define SIOCSETCTXDOWN (SIOCDEVPRIVATE + 6) /* obsolete */
++#define SIOCSETCSPEED (SIOCDEVPRIVATE + 7)
++#define SIOCTXGEN (SIOCDEVPRIVATE + 8)
++#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
++#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
++#define SIOCPERF (SIOCDEVPRIVATE + 11)
++#define SIOCPERFDMA (SIOCDEVPRIVATE + 12)
+
-+#endif /* _bcmenetmib_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h 2005-08-28 11:12:20.433858696 +0200
-@@ -0,0 +1,43 @@
++#else /* !linux */
++
++#define SIOCSETCUP _IOWR('e', 130 + 0, struct ifreq)
++#define SIOCSETCDOWN _IOWR('e', 130 + 1, struct ifreq)
++#define SIOCSETCLOOP _IOWR('e', 130 + 2, struct ifreq)
++#define SIOCGETCDUMP _IOWR('e', 130 + 3, struct ifreq)
++#define SIOCSETCSETMSGLEVEL _IOWR('e', 130 + 4, struct ifreq)
++#define SIOCSETCPROMISC _IOWR('e', 130 + 5, struct ifreq)
++#define SIOCSETCTXDOWN _IOWR('e', 130 + 6, struct ifreq) /* obsolete */
++#define SIOCSETCSPEED _IOWR('e', 130 + 7, struct ifreq)
++#define SIOCTXGEN _IOWR('e', 130 + 8, struct ifreq)
++
++#endif
++
++/* arg to SIOCTXGEN */
++struct txg {
++ uint32 num; /* number of frames to send */
++ uint32 delay; /* delay in microseconds between sending each */
++ uint32 size; /* size of ether frame to send */
++ uchar buf[1514]; /* starting ether frame data */
++};
++
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h 2005-08-28 11:12:20.437858088 +0200
+@@ -0,0 +1,184 @@
+/*
-+ * Hardware-specific Receive Data Header for the
-+ * Broadcom Home Networking Division
-+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
++ * flash.h: Common definitions for flash access.
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
+ * $Id$
+ */
+
-+#ifndef _bcmenetrxh_h_
-+#define _bcmenetrxh_h_
++/* Types of flashes we know about */
++typedef enum _flash_type {OLD, BSC, SCS, AMD, SST} flash_type_t;
+
-+/*
-+ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header
-+ * with every frame consisting of
-+ * 16bits of frame length, followed by
-+ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined.
-+ */
-+typedef volatile struct {
-+ uint16 len;
-+ uint16 flags;
-+ uint16 pad[12];
-+} bcmenetrxh_t;
++/* Commands to write/erase the flases */
++typedef struct _flash_cmds{
++ flash_type_t type;
++ bool need_unlock;
++ uint16 pre_erase;
++ uint16 erase_block;
++ uint16 erase_chip;
++ uint16 write_word;
++ uint16 write_buf;
++ uint16 clear_csr;
++ uint16 read_csr;
++ uint16 read_id;
++ uint16 confirm;
++ uint16 read_array;
++} flash_cmds_t;
+
-+#define RXHDR_LEN 28
++#define UNLOCK_CMD_WORDS 2
+
-+#define RXF_L ((uint16)1 << 11) /* last buffer in a frame */
-+#define RXF_MISS ((uint16)1 << 7) /* received due to promisc mode */
-+#define RXF_BRDCAST ((uint16)1 << 6) /* dest is broadcast address */
-+#define RXF_MULT ((uint16)1 << 5) /* dest is multicast address */
-+#define RXF_LG ((uint16)1 << 4) /* frame length > rxmaxlength */
-+#define RXF_NO ((uint16)1 << 3) /* odd number of nibbles */
-+#define RXF_RXER ((uint16)1 << 2) /* receive symbol error */
-+#define RXF_CRC ((uint16)1 << 1) /* crc error */
-+#define RXF_OV ((uint16)1 << 0) /* fifo overflow */
++typedef struct _unlock_cmd {
++ uint addr[UNLOCK_CMD_WORDS];
++ uint16 cmd[UNLOCK_CMD_WORDS];
++} unlock_cmd_t;
+
-+#endif /* _bcmenetrxh_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h 2005-08-28 11:12:20.433858696 +0200
-@@ -0,0 +1,131 @@
-+/*
-+ * NVRAM variable manipulation
-+ *
-+ * $Copyright Open Broadcom Corporation$
-+ *
-+ * $Id: bcmnvram.h,v 1.1.1.1 2004/01/21 03:50:44 gigis Exp $
-+ */
++/* Flash descriptors */
++typedef struct _flash_desc {
++ uint16 mfgid; /* Manufacturer Id */
++ uint16 devid; /* Device Id */
++ uint size; /* Total size in bytes */
++ uint width; /* Device width in bytes */
++ flash_type_t type; /* Device type old, S, J */
++ uint bsize; /* Block size */
++ uint nb; /* Number of blocks */
++ uint ff; /* First full block */
++ uint lf; /* Last full block */
++ uint nsub; /* Number of subblocks */
++ uint *subblocks; /* Offsets for subblocks */
++ char *desc; /* Description */
++} flash_desc_t;
+
-+#ifndef _bcmnvram_h_
-+#define _bcmnvram_h_
+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+#include <typedefs.h>
++#ifdef DECLARE_FLASHES
+
-+struct nvram_header {
-+ uint32 magic;
-+ uint32 len;
-+ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */
-+ uint32 config_refresh; /* 0:15 config, 16:31 refresh */
-+ uint32 config_ncdl; /* ncdl values for memc */
++flash_cmds_t flash_cmds[] = {
++/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */
++ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff },
++ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff },
++ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 },
++ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 },
++ { 0 }
+};
+
-+struct nvram_tuple {
-+ char *name;
-+ char *value;
-+ struct nvram_tuple *next;
++unlock_cmd_t unlock_cmd_amd = {
++#ifdef MIPSEB
++/* addr: */ { 0x0aa8, 0x0556},
++#else
++/* addr: */ { 0x0aaa, 0x0554},
++#endif
++/* data: */ { 0xaa, 0x55}
+};
+
-+/*
-+ * Initialize NVRAM access. May be unnecessary or undefined on certain
-+ * platforms.
-+ */
-+extern int nvram_init(void *sbh);
-+
-+/*
-+ * Disable NVRAM access. May be unnecessary or undefined on certain
-+ * platforms.
-+ */
-+extern void nvram_exit(void);
-+
-+/*
-+ * Get the value of an NVRAM variable. The pointer returned may be
-+ * invalid after a set.
-+ * @param name name of variable to get
-+ * @return value of variable or NULL if undefined
-+ */
-+extern char * nvram_get(const char *name);
-+
-+/*
-+ * Get the value of an NVRAM variable.
-+ * @param name name of variable to get
-+ * @return value of variable or NUL if undefined
-+ */
-+#define nvram_safe_get(name) (nvram_get(name) ? : "")
-+
-+/*
-+ * Match an NVRAM variable.
-+ * @param name name of variable to match
-+ * @param match value to compare against value of variable
-+ * @return TRUE if variable is defined and its value is string equal
-+ * to match or FALSE otherwise
-+ */
-+static INLINE int
-+nvram_match(char *name, char *match) {
-+ const char *value = nvram_get(name);
-+ return (value && !strcmp(value, match));
-+}
++unlock_cmd_t unlock_cmd_sst = {
++#ifdef MIPSEB
++/* addr: */ { 0xaaa8, 0x5556},
++#else
++/* addr: */ { 0xaaaa, 0x5554},
++#endif
++/* data: */ { 0xaa, 0x55}
++};
+
-+/*
-+ * Inversely match an NVRAM variable.
-+ * @param name name of variable to match
-+ * @param match value to compare against value of variable
-+ * @return TRUE if variable is defined and its value is not string
-+ * equal to invmatch or FALSE otherwise
-+ */
-+static INLINE int
-+nvram_invmatch(char *name, char *invmatch) {
-+ const char *value = nvram_get(name);
-+ return (value && strcmp(value, invmatch));
-+}
++#define AMD_CMD 0xaaa
++#define SST_CMD 0xaaaa
+
-+/*
-+ * Set the value of an NVRAM variable. The name and value strings are
-+ * copied into private storage. Pointers to previously set values
-+ * may become invalid. The new value may be immediately
-+ * retrieved but will not be permanently stored until a commit.
-+ * @param name name of variable to set
-+ * @param value value of variable
-+ * @return 0 on success and errno on failure
-+ */
-+extern int nvram_set(const char *name, const char *value);
++/* intel unlock block cmds */
++#define INTEL_UNLOCK1 0x60
++#define INTEL_UNLOCK2 0xD0
+
-+/*
-+ * Unset an NVRAM variable. Pointers to previously set values
-+ * remain valid until a set.
-+ * @param name name of variable to unset
-+ * @return 0 on success and errno on failure
-+ * NOTE: use nvram_commit to commit this change to flash.
-+ */
-+extern int nvram_unset(const char *name);
++/* Just eight blocks of 8KB byte each */
+
-+/*
-+ * Commit NVRAM variables to permanent storage. All pointers to values
-+ * may be invalid after a commit.
-+ * NVRAM values are undefined after a commit.
-+ * @return 0 on success and errno on failure
-+ */
-+extern int nvram_commit(void);
++uint blk8x8k[] = { 0x00000000,
++ 0x00002000,
++ 0x00004000,
++ 0x00006000,
++ 0x00008000,
++ 0x0000a000,
++ 0x0000c000,
++ 0x0000e000,
++ 0x00010000
++};
+
-+/*
-+ * Get all NVRAM variables (format name=value\0 ... \0\0).
-+ * @param buf buffer to store variables
-+ * @param count size of buffer in bytes
-+ * @return 0 on success and errno on failure
-+ */
-+extern int nvram_getall(char *buf, int count);
++/* Funky AMD arrangement for 29xx800's */
++uint amd800[] = { 0x00000000, /* 16KB */
++ 0x00004000, /* 32KB */
++ 0x0000c000, /* 8KB */
++ 0x0000e000, /* 8KB */
++ 0x00010000, /* 8KB */
++ 0x00012000, /* 8KB */
++ 0x00014000, /* 32KB */
++ 0x0001c000, /* 16KB */
++ 0x00020000
++};
+
-+extern int kernel_write(unsigned char *buffer, int offset, int length);
++/* AMD arrangement for 29xx160's */
++uint amd4112[] = { 0x00000000, /* 32KB */
++ 0x00008000, /* 8KB */
++ 0x0000a000, /* 8KB */
++ 0x0000c000, /* 16KB */
++ 0x00010000
++};
++uint amd2114[] = { 0x00000000, /* 16KB */
++ 0x00004000, /* 8KB */
++ 0x00006000, /* 8KB */
++ 0x00008000, /* 32KB */
++ 0x00010000
++};
+
-+#endif /* _LANGUAGE_ASSEMBLY */
+
-+#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */
-+#define NVRAM_VERSION 1
-+#define NVRAM_HEADER_SIZE 20
-+#define NVRAM_LOC_GAP 0x100000
-+#define NVRAM_SPACE 0x2000
-+#define NVRAM_FIRST_LOC (0xbfd00000 - NVRAM_SPACE)
-+#define NVRAM_LAST_LOC (0xc0000000 - NVRAM_SPACE)
+
-+#endif /* _bcmnvram_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h 2005-08-28 11:12:20.433858696 +0200
-@@ -0,0 +1,24 @@
-+/*
-+ * Misc useful routines to access NIC srom
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++flash_desc_t flashes[] = {
++ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" },
++ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" },
++ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" },
++ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" },
++ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" },
++ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" },
++ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" },
++ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" },
++ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" },
++ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" },
++ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" },
++ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" },
++ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" },
++ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" },
++ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" },
++ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" },
++ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" },
++ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" },
++ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" },
++ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" },
++ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" },
++ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" },
++ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" },
++ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
++ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
++ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
++ { 0x0001, 0x2201, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
++ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
++ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" },
++ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" },
++ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" },
++ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" },
++ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" },
++ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" },
++ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" },
++ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" },
++ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" },
++ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" },
++ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" },
++ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL },
++};
+
-+#ifndef _bcmsrom_h_
-+#define _bcmsrom_h_
++#else
+
-+extern int srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count);
++extern flash_cmds_t flash_cmds[];
++extern unlock_cmd_t unlock_cmd;
++extern flash_desc_t flashes[];
+
-+extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
-+extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
-+extern int srom_parsecis(uint8 *cis, char **vars, int *count);
-+
-+#endif /* _bcmsrom_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h 2005-08-28 11:12:20.435858392 +0200
-@@ -0,0 +1,136 @@
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h 2005-08-28 11:12:20.437858088 +0200
+@@ -0,0 +1,34 @@
+/*
-+ * Misc useful os-independent macros and functions.
++ * BCM47XX FLASH driver interface
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ * $Id$
+ */
+
-+#ifndef _bcmutils_h_
-+#define _bcmutils_h_
++#ifndef _flashutl_h_
++#define _flashutl_h_
+
-+#ifndef MIN
-+#define MIN(a, b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef MAX
-+#define MAX(a, b) (((a)>(b))?(a):(b))
-+#endif
-+
-+#define CEIL(x, y) (((x) + ((y)-1)) / (y))
-+#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y))
-+#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0)
-+#define ISPOWEROF2(x) ((((x)-1)&(x))==0)
-+#define OFFSETOF(type, member) ((uint) &((type *)0)->member)
-+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
-+
-+/* bit map related macros */
-+#ifndef setbit
-+#define NBBY 8 /* 8 bits per byte */
-+#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
-+#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-+#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
-+#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-+#endif
-+
-+#define NBITS(type) (sizeof (type) * 8)
-+
-+#define _BCM_U 0x01 /* upper */
-+#define _BCM_L 0x02 /* lower */
-+#define _BCM_D 0x04 /* digit */
-+#define _BCM_C 0x08 /* cntrl */
-+#define _BCM_P 0x10 /* punct */
-+#define _BCM_S 0x20 /* white space (space/lf/tab) */
-+#define _BCM_X 0x40 /* hex digit */
-+#define _BCM_SP 0x80 /* hard space (0x20) */
-+
-+extern unsigned char bcm_ctype[];
-+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
-+
-+#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
-+#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0)
-+#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0)
-+#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0)
-+#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
-+#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0)
-+#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0)
-+#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0)
-+#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
-+
-+/*
-+ * Spin at most 'us' microseconds while 'exp' is true.
-+ * Caller should explicitly test 'exp' when this completes
-+ * and take appropriate error action if 'exp' is still true.
-+ */
-+#define SPINWAIT(exp, us) { \
-+ uint countdown = (us) + 9; \
-+ while ((exp) && (countdown >= 10)) {\
-+ OSL_DELAY(10); \
-+ countdown -= 10; \
-+ } \
-+}
-+
-+/* generic osl packet queue */
-+struct pktq {
-+ void *head;
-+ void *tail;
-+ uint len;
-+ uint maxlen;
-+};
-+#define DEFAULT_QLEN 128
-+
-+#define pktq_len(q) ((q)->len)
-+#define pktq_avail(q) ((q)->maxlen - (q)->len)
-+#define pktq_head(q) ((q)->head)
-+#define pktq_full(q) ((q)->len >= (q)->maxlen)
-+
-+/* crc defines */
-+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
-+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
-+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
-+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
-+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
-+
-+/* tag_ID/length/value_buffer tuple */
-+typedef struct bcm_tlv {
-+ uint8 id;
-+ uint8 len;
-+ uint8 data[1];
-+} bcm_tlv_t;
++#define FLASH_BASE 0xbfc00000 /* BCM4710 */
+
-+/* externs */
-+extern uint bcm_atoi(char *s);
-+extern uchar bcm_toupper(uchar c);
-+extern ulong bcm_strtoul(char *cp, char **endp, uint base);
-+extern void deadbeef(char *p, uint len);
-+extern void prhex(char *msg, uchar *buf, uint len);
-+extern void prpkt(char *msg, void *drv, void *p0);
-+extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf);
-+extern uint pkttotlen(void *drv, void *);
-+extern uchar *bcm_ether_ntoa(char *ea, char *buf);
-+extern int bcm_ether_atoe(char *p, char *ea);
-+extern void bcm_mdelay(uint ms);
-+extern char *getvar(char *vars, char *name);
-+extern int getintvar(char *vars, char *name);
++int flash_init(void* base_addr, char *flash_str);
++int flash_erase(void);
++int flash_eraseblk(unsigned long off);
++int flash_write(unsigned long off, uint16 *src, uint nbytes);
++unsigned long flash_block_base(unsigned long off);
++unsigned long flash_block_lim(unsigned long off);
++int FlashWriteRange(unsigned short* dst, unsigned short* src, unsigned int numbytes);
+
-+extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc);
-+extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc);
-+extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc);
-+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
-+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
-+extern void pktqinit(struct pktq *q, int maxlen);
-+extern void pktenq(struct pktq *q, void *p, bool lifo);
-+extern void *pktdeq(struct pktq *q);
++void nvWrite(unsigned short *data, unsigned int len);
+
-+#define bcmlog(fmt, a1, a2)
-+#define bcmdumplog(buf, size) *buf = '\0'
++/* Global vars */
++extern char* flashutl_base;
++extern flash_desc_t* flashutl_desc;
++extern flash_cmds_t* flashutl_cmd;
+
-+#endif /* _bcmutils_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h 2005-08-28 11:12:20.435858392 +0200
-@@ -0,0 +1,85 @@
++#endif /* _flashutl_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-08-28 11:12:20.438857936 +0200
+@@ -0,0 +1,181 @@
+/*
-+ * bit manipulation utility functions
++ * Generic Broadcom Home Networking Division (HND) DMA engine definitions.
++ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
++ * $Id$
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
+ */
+
-+#ifndef _BITFUNCS_H
-+#define _BITFUNCS_H
-+
-+#include <typedefs.h>
-+
-+/* local prototypes */
-+static INLINE uint32 find_msbit(uint32 x);
-+
++#ifndef _hnddma_h_
++#define _hnddma_h_
+
+/*
-+ * find_msbit: returns index of most significant set bit in x, with index
-+ * range defined as 0-31. NOTE: returns zero if input is zero.
++ * Each DMA processor consists of a transmit channel and a receive channel.
+ */
++typedef volatile struct {
++ /* transmit channel */
++ uint32 xmtcontrol; /* enable, et al */
++ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */
++ uint32 xmtptr; /* last descriptor posted to chip */
++ uint32 xmtstatus; /* current active descriptor, et al */
+
-+#if defined(USE_PENTIUM_BSR) && defined(__GNUC__)
++ /* receive channel */
++ uint32 rcvcontrol; /* enable, et al */
++ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */
++ uint32 rcvptr; /* last descriptor posted to chip */
++ uint32 rcvstatus; /* current active descriptor, et al */
++} dmaregs_t;
+
-+/*
-+ * Implementation for Pentium processors and gcc. Note that this
-+ * instruction is actually very slow on some processors (e.g., family 5,
-+ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic
-+ * implementation instead.
-+ */
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+ uint msbit;
-+ __asm__("bsrl %1,%0"
-+ :"=r" (msbit)
-+ :"r" (x));
-+ return msbit;
-+}
++typedef volatile struct {
++ /* diag access */
++ uint32 fifoaddr; /* diag address */
++ uint32 fifodatalow; /* low 32bits of data */
++ uint32 fifodatahigh; /* high 32bits of data */
++ uint32 pad; /* reserved */
++} dmafifo_t;
+
-+#else
++/* transmit channel control */
++#define XC_XE ((uint32)1 << 0) /* transmit enable */
++#define XC_SE ((uint32)1 << 1) /* transmit suspend request */
++#define XC_LE ((uint32)1 << 2) /* loopback enable */
++#define XC_FL ((uint32)1 << 4) /* flush request */
+
-+/*
-+ * Generic Implementation
-+ */
++/* transmit descriptor table pointer */
++#define XP_LD_MASK 0xfff /* last valid descriptor */
+
-+#define DB_POW_MASK16 0xffff0000
-+#define DB_POW_MASK8 0x0000ff00
-+#define DB_POW_MASK4 0x000000f0
-+#define DB_POW_MASK2 0x0000000c
-+#define DB_POW_MASK1 0x00000002
++/* transmit channel status */
++#define XS_CD_MASK 0x0fff /* current descriptor pointer */
++#define XS_XS_MASK 0xf000 /* transmit state */
++#define XS_XS_SHIFT 12
++#define XS_XS_DISABLED 0x0000 /* disabled */
++#define XS_XS_ACTIVE 0x1000 /* active */
++#define XS_XS_IDLE 0x2000 /* idle wait */
++#define XS_XS_STOPPED 0x3000 /* stopped */
++#define XS_XS_SUSP 0x4000 /* suspend pending */
++#define XS_XE_MASK 0xf0000 /* transmit errors */
++#define XS_XE_SHIFT 16
++#define XS_XE_NOERR 0x00000 /* no error */
++#define XS_XE_DPE 0x10000 /* descriptor protocol error */
++#define XS_XE_DFU 0x20000 /* data fifo underrun */
++#define XS_XE_BEBR 0x30000 /* bus error on buffer read */
++#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */
++#define XS_FL ((uint32)1 << 20) /* flushed */
+
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+ uint32 temp_x = x;
-+ uint msbit = 0;
-+ if (temp_x & DB_POW_MASK16) {
-+ temp_x >>= 16;
-+ msbit = 16;
-+ }
-+ if (temp_x & DB_POW_MASK8) {
-+ temp_x >>= 8;
-+ msbit += 8;
-+ }
-+ if (temp_x & DB_POW_MASK4) {
-+ temp_x >>= 4;
-+ msbit += 4;
-+ }
-+ if (temp_x & DB_POW_MASK2) {
-+ temp_x >>= 2;
-+ msbit += 2;
-+ }
-+ if (temp_x & DB_POW_MASK1) {
-+ msbit += 1;
-+ }
-+ return(msbit);
-+}
++/* receive channel control */
++#define RC_RE ((uint32)1 << 0) /* receive enable */
++#define RC_RO_MASK 0xfe /* receive frame offset */
++#define RC_RO_SHIFT 1
++#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */
+
-+#endif
++/* receive descriptor table pointer */
++#define RP_LD_MASK 0xfff /* last valid descriptor */
+
-+#endif /* _BITFUNCS_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h 2005-08-28 11:12:20.435858392 +0200
-@@ -0,0 +1,69 @@
-+/*
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ *
-+*/
-+
-+#ifndef _epivers_h_
-+#define _epivers_h_
-+
-+#ifdef linux
-+#include <linux/config.h>
-+#endif
-+
-+/* Vendor Name, ASCII, 32 chars max */
-+#ifdef COMPANYNAME
-+#define HPNA_VENDOR COMPANYNAME
-+#else
-+#define HPNA_VENDOR "Broadcom Corporation"
-+#endif
++/* receive channel status */
++#define RS_CD_MASK 0x0fff /* current descriptor pointer */
++#define RS_RS_MASK 0xf000 /* receive state */
++#define RS_RS_SHIFT 12
++#define RS_RS_DISABLED 0x0000 /* disabled */
++#define RS_RS_ACTIVE 0x1000 /* active */
++#define RS_RS_IDLE 0x2000 /* idle wait */
++#define RS_RS_STOPPED 0x3000 /* reserved */
++#define RS_RE_MASK 0xf0000 /* receive errors */
++#define RS_RE_SHIFT 16
++#define RS_RE_NOERR 0x00000 /* no error */
++#define RS_RE_DPE 0x10000 /* descriptor protocol error */
++#define RS_RE_DFO 0x20000 /* data fifo overflow */
++#define RS_RE_BEBW 0x30000 /* bus error on buffer write */
++#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */
+
-+/* Driver Date, ASCII, 32 chars max */
-+#define HPNA_DRV_BUILD_DATE __DATE__
++/* fifoaddr */
++#define FA_OFF_MASK 0xffff /* offset */
++#define FA_SEL_MASK 0xf0000 /* select */
++#define FA_SEL_SHIFT 16
++#define FA_SEL_XDD 0x00000 /* transmit dma data */
++#define FA_SEL_XDP 0x10000 /* transmit dma pointers */
++#define FA_SEL_RDD 0x40000 /* receive dma data */
++#define FA_SEL_RDP 0x50000 /* receive dma pointers */
++#define FA_SEL_XFD 0x80000 /* transmit fifo data */
++#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */
++#define FA_SEL_RFD 0xc0000 /* receive fifo data */
++#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */
+
-+/* Hardware Manufacture Date, ASCII, 32 chars max */
-+#define HPNA_HW_MFG_DATE "Not Specified"
++/*
++ * DMA Descriptor
++ * Descriptors are only read by the hardware, never written back.
++ */
++typedef volatile struct {
++ uint32 ctrl; /* misc control bits & bufcount */
++ uint32 addr; /* data buffer address */
++} dmadd_t;
+
-+/* See documentation for Device Type values, 32 values max */
-+#ifndef HPNA_DEV_TYPE
++/*
++ * Each descriptor ring must be 4096byte aligned
++ * and fit within a single 4096byte page.
++ */
++#define DMAMAXRINGSZ 4096
++#define DMARINGALIGN 4096
+
-+#if defined(CONFIG_BRCM_VJ)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY }
++/* control flags */
++#define CTRL_BC_MASK 0x1fff /* buffer byte count */
++#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */
++#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */
++#define CTRL_EOF ((uint32)1 << 30) /* end of frame */
++#define CTRL_SOF ((uint32)1 << 31) /* start of frame */
+
-+#elif defined(CONFIG_BCRM_93725)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
++/* control flags in the range [27:20] are core-specific and not defined here */
++#define CTRL_CORE_MASK 0x0ff00000
+
-+#else
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC }
++/* export structure */
++typedef volatile struct {
++ /* rx error counters */
++ uint rxgiants; /* rx giant frames */
++ uint rxnobuf; /* rx out of dma descriptors */
++ /* tx error counters */
++ uint txnobuf; /* tx out of dma descriptors */
++} hnddma_t;
+
++#ifndef di_t
++#define di_t void
+#endif
+
-+#endif /* !HPNA_DEV_TYPE */
-+
-+
-+#define EPI_MAJOR_VERSION 1
-+
-+#define EPI_MINOR_VERSION 1
-+
-+#define EPI_RC_NUMBER 2
-+
-+#define EPI_INCREMENTAL_NUMBER 0
-+
-+#define EPI_BUILD_NUMBER 0
-+
-+#define EPI_VERSION 1,1,2,0
-+
-+#define EPI_VERSION_NUM 0x01010200
-+
-+/* Driver Version String, ASCII, 32 chars max */
-+#define EPI_VERSION_STR "1.1.2.0"
-+#define EPI_ROUTER_VERSION_STR "1.1.2.0"
++/* externs */
++extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs,
++ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset,
++ uint ddoffset, uint dataoffset, uint *msg_level);
++extern void dma_detach(di_t *di);
++extern void dma_txreset(di_t *di);
++extern void dma_rxreset(di_t *di);
++extern void dma_txinit(di_t *di);
++extern bool dma_txenabled(di_t *di);
++extern void dma_rxinit(di_t *di);
++extern void dma_rxenable(di_t *di);
++extern bool dma_rxenabled(di_t *di);
++extern void dma_txsuspend(di_t *di);
++extern void dma_txresume(di_t *di);
++extern bool dma_txsuspended(di_t *di);
++extern bool dma_txstopped(di_t *di);
++extern bool dma_rxstopped(di_t *di);
++extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
++extern int dma_tx(di_t *di, void *p, uint32 coreflags);
++extern void dma_fifoloopbackenable(di_t *di);
++extern void *dma_rx(di_t *di);
++extern void dma_rxfill(di_t *di);
++extern void dma_txreclaim(di_t *di, bool forceall);
++extern void dma_rxreclaim(di_t *di);
++extern char *dma_dump(di_t *di, char *buf);
++extern char *dma_dumptx(di_t *di, char *buf);
++extern char *dma_dumprx(di_t *di, char *buf);
++extern uint dma_getvar(di_t *di, char *name);
++extern void *dma_getnexttxp(di_t *di, bool forceall);
++extern void *dma_getnextrxp(di_t *di, bool forceall);
++extern void dma_txblock(di_t *di);
++extern void dma_txunblock(di_t *di);
++extern uint dma_txactive(di_t *di);
+
-+#endif /* _epivers_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in
---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in 2005-08-28 11:12:20.436858240 +0200
-@@ -0,0 +1,69 @@
++#endif /* _hnddma_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-08-28 11:12:20.439857784 +0200
+@@ -0,0 +1,16 @@
+/*
++ * Alternate include file for HND sbmips.h since CFE also ships with
++ * a sbmips.h.
++ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
-+ *
-+*/
-+
-+#ifndef _epivers_h_
-+#define _epivers_h_
-+
-+#ifdef linux
-+#include <linux/config.h>
-+#endif
-+
-+/* Vendor Name, ASCII, 32 chars max */
-+#ifdef COMPANYNAME
-+#define HPNA_VENDOR COMPANYNAME
-+#else
-+#define HPNA_VENDOR "Broadcom Corporation"
-+#endif
-+
-+/* Driver Date, ASCII, 32 chars max */
-+#define HPNA_DRV_BUILD_DATE __DATE__
-+
-+/* Hardware Manufacture Date, ASCII, 32 chars max */
-+#define HPNA_HW_MFG_DATE "Not Specified"
++ */
+
-+/* See documentation for Device Type values, 32 values max */
-+#ifndef HPNA_DEV_TYPE
++#include "sbmips.h"
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-08-28 11:12:20.440857632 +0200
+@@ -0,0 +1,313 @@
++/*
++ * Linux OS Independent Layer
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
+
-+#if defined(CONFIG_BRCM_VJ)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY }
++#ifndef _linux_osl_h_
++#define _linux_osl_h_
+
-+#elif defined(CONFIG_BCRM_93725)
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
++#include <typedefs.h>
+
-+#else
-+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC }
++/* use current 2.4.x calling conventions */
++#include <linuxver.h>
+
-+#endif
++/* assert and panic */
++#define ASSERT(exp) do {} while (0)
+
-+#endif /* !HPNA_DEV_TYPE */
++/* PCMCIA attribute space access macros */
++#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
++ osl_pcmcia_read_attr((osh), (offset), (buf), (size))
++#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
++ osl_pcmcia_write_attr((osh), (offset), (buf), (size))
++extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size);
++extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size);
+
++/* PCI configuration space access macros */
++#define OSL_PCI_READ_CONFIG(loc, offset, size) \
++ osl_pci_read_config((loc), (offset), (size))
++#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
++ osl_pci_write_config((loc), (offset), (size), (val))
++extern uint32 osl_pci_read_config(void *loc, uint size, uint offset);
++extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val);
+
-+#define EPI_MAJOR_VERSION @EPI_MAJOR_VERSION@
++/* OSL initialization */
++#define osl_init() do {} while (0)
+
-+#define EPI_MINOR_VERSION @EPI_MINOR_VERSION@
++/* host/bus architecture-specific byte swap */
++#define BUS_SWAP32(v) (v)
+
-+#define EPI_RC_NUMBER @EPI_RC_NUMBER@
++/*
++ * BINOSL selects the slightly slower function-call-based binary compatible osl.
++ * Macros expand to calls to functions defined in linux_osl.c .
++ */
++#ifndef BINOSL
+
-+#define EPI_INCREMENTAL_NUMBER @EPI_INCREMENTAL_NUMBER@
-+
-+#define EPI_BUILD_NUMBER @EPI_BUILD_NUMBER@
-+
-+#define EPI_VERSION @EPI_VERSION@
-+
-+#define EPI_VERSION_NUM @EPI_VERSION_NUM@
-+
-+/* Driver Version String, ASCII, 32 chars max */
-+#define EPI_VERSION_STR "@EPI_VERSION_STR@"
-+#define EPI_ROUTER_VERSION_STR "@EPI_ROUTER_VERSION_STR@"
-+
-+#endif /* _epivers_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h 2005-08-28 11:12:20.436858240 +0200
-@@ -0,0 +1,60 @@
-+/*
-+ * Driver-specific socket ioctls
-+ * used by BSD, Linux, and PSOS
-+ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _etsockio_h_
-+#define _etsockio_h_
-+
-+/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */
++/* string library, kernel mode */
++#define printf(fmt, args...) printk(fmt, ## args)
++#include <linux/kernel.h>
++#include <linux/string.h>
+
++/* register access macros */
++#define R_REG(r) ({ \
++ __typeof(*(r)) __osl_v; \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): __osl_v = readb((volatile uint8*)(r)); break; \
++ case sizeof(uint16): __osl_v = readw((volatile uint16*)(r)); break; \
++ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \
++ } \
++ __osl_v; \
++})
++#define W_REG(r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \
++ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \
++ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
+
-+#if defined(linux)
-+#define SIOCSETCUP (SIOCDEVPRIVATE + 0)
-+#define SIOCSETCDOWN (SIOCDEVPRIVATE + 1)
-+#define SIOCSETCLOOP (SIOCDEVPRIVATE + 2)
-+#define SIOCGETCDUMP (SIOCDEVPRIVATE + 3)
-+#define SIOCSETCSETMSGLEVEL (SIOCDEVPRIVATE + 4)
-+#define SIOCSETCPROMISC (SIOCDEVPRIVATE + 5)
-+#define SIOCSETCTXDOWN (SIOCDEVPRIVATE + 6) /* obsolete */
-+#define SIOCSETCSPEED (SIOCDEVPRIVATE + 7)
-+#define SIOCTXGEN (SIOCDEVPRIVATE + 8)
-+#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
-+#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
-+#define SIOCPERF (SIOCDEVPRIVATE + 11)
-+#define SIOCPERFDMA (SIOCDEVPRIVATE + 12)
++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
+
-+#else /* !linux */
++/* bcopy, bcmp, and bzero */
++#define bcopy(src, dst, len) memcpy((dst), (src), (len))
++#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
++#define bzero(b, len) memset((b), '\0', (len))
+
-+#define SIOCSETCUP _IOWR('e', 130 + 0, struct ifreq)
-+#define SIOCSETCDOWN _IOWR('e', 130 + 1, struct ifreq)
-+#define SIOCSETCLOOP _IOWR('e', 130 + 2, struct ifreq)
-+#define SIOCGETCDUMP _IOWR('e', 130 + 3, struct ifreq)
-+#define SIOCSETCSETMSGLEVEL _IOWR('e', 130 + 4, struct ifreq)
-+#define SIOCSETCPROMISC _IOWR('e', 130 + 5, struct ifreq)
-+#define SIOCSETCTXDOWN _IOWR('e', 130 + 6, struct ifreq) /* obsolete */
-+#define SIOCSETCSPEED _IOWR('e', 130 + 7, struct ifreq)
-+#define SIOCTXGEN _IOWR('e', 130 + 8, struct ifreq)
++/* general purpose memory allocation */
++#define MALLOC(size) kmalloc((size), GFP_ATOMIC)
++#define MFREE(addr, size) kfree((addr))
+
++/* uncached virtual address */
++#ifdef mips
++#define OSL_UNCACHED(va) KSEG1ADDR((va))
++#include <asm/addrspace.h>
++#else
++#define OSL_UNCACHED(va) (va)
+#endif
+
-+/* arg to SIOCTXGEN */
-+struct txg {
-+ uint32 num; /* number of frames to send */
-+ uint32 delay; /* delay in microseconds between sending each */
-+ uint32 size; /* size of ether frame to send */
-+ uchar buf[1514]; /* starting ether frame data */
-+};
++/* get processor cycle count */
++#if defined(mips)
++#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2)
++#elif defined(__i386__)
++#define OSL_GETCYCLES(x) rdtscl((x))
++#else
++#define OSL_GETCYCLES(x) ((x) = 0)
++#endif
+
++/* dereference an address that may cause a bus exception */
++#ifdef mips
++#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
++#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module")
++#else
++#define BUSPROBE(val, addr) get_dbe((val), (addr))
++#include <asm/paccess.h>
++#endif
++#else
++#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; })
+#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h 2005-08-28 11:12:20.437858088 +0200
-@@ -0,0 +1,184 @@
-+/*
-+ * flash.h: Common definitions for flash access.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
+
-+/* Types of flashes we know about */
-+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST} flash_type_t;
++/* map/unmap physical to virtual I/O */
++#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
++#define REG_UNMAP(va) iounmap((void *)(va))
+
-+/* Commands to write/erase the flases */
-+typedef struct _flash_cmds{
-+ flash_type_t type;
-+ bool need_unlock;
-+ uint16 pre_erase;
-+ uint16 erase_block;
-+ uint16 erase_chip;
-+ uint16 write_word;
-+ uint16 write_buf;
-+ uint16 clear_csr;
-+ uint16 read_csr;
-+ uint16 read_id;
-+ uint16 confirm;
-+ uint16 read_array;
-+} flash_cmds_t;
++/* allocate/free shared (dma-able) consistent (uncached) memory */
++#define DMA_ALLOC_CONSISTENT(dev, size, pap) \
++ pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap))
++#define DMA_FREE_CONSISTENT(dev, va, size, pa) \
++ pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa))
+
-+#define UNLOCK_CMD_WORDS 2
++/* map/unmap direction */
++#define DMA_TX PCI_DMA_TODEVICE
++#define DMA_RX PCI_DMA_FROMDEVICE
+
-+typedef struct _unlock_cmd {
-+ uint addr[UNLOCK_CMD_WORDS];
-+ uint16 cmd[UNLOCK_CMD_WORDS];
-+} unlock_cmd_t;
++/* map/unmap shared (dma-able) memory */
++#define DMA_MAP(dev, va, size, direction, p) \
++ pci_map_single((dev), (va), (size), (direction))
++#define DMA_UNMAP(dev, pa, size, direction, p) \
++ pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction))
+
-+/* Flash descriptors */
-+typedef struct _flash_desc {
-+ uint16 mfgid; /* Manufacturer Id */
-+ uint16 devid; /* Device Id */
-+ uint size; /* Total size in bytes */
-+ uint width; /* Device width in bytes */
-+ flash_type_t type; /* Device type old, S, J */
-+ uint bsize; /* Block size */
-+ uint nb; /* Number of blocks */
-+ uint ff; /* First full block */
-+ uint lf; /* Last full block */
-+ uint nsub; /* Number of subblocks */
-+ uint *subblocks; /* Offsets for subblocks */
-+ char *desc; /* Description */
-+} flash_desc_t;
++/* microsecond delay */
++#define OSL_DELAY(usec) udelay(usec)
++#include <linux/delay.h>
++#define OSL_SLEEP(usec) set_current_state(TASK_INTERRUPTIBLE); \
++ schedule_timeout((usec*HZ)/1000000);
++#define OSL_IN_INTERRUPT() in_interrupt()
+
++/* shared (dma-able) memory access macros */
++#define R_SM(r) *(r)
++#define W_SM(r, v) (*(r) = (v))
++#define BZERO_SM(r, len) memset((r), '\0', (len))
+
-+#ifdef DECLARE_FLASHES
++/* packet primitives */
++#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send))
++#define PKTFREE(drv, skb, send) osl_pktfree((skb))
++#define PKTDATA(drv, skb) (((struct sk_buff*)(skb))->data)
++#define PKTLEN(drv, skb) (((struct sk_buff*)(skb))->len)
++#define PKTHEADROOM(drv, skb) (PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head))
++#define PKTTAILROOM(drv, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
++#define PKTNEXT(drv, skb) (((struct sk_buff*)(skb))->next)
++#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
++#define PKTSETLEN(drv, skb, len) __skb_trim((struct sk_buff*)(skb), (len))
++#define PKTPUSH(drv, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes))
++#define PKTPULL(drv, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes))
++#define PKTDUP(drv, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
++#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum)
++#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x))
++#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev)
++#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
++extern void *osl_pktget(void *drv, uint len, bool send);
++extern void osl_pktfree(void *skb);
+
-+flash_cmds_t flash_cmds[] = {
-+/* type needu preera eraseb erasech write wbuf clcsr rdcsr rdid confrm read */
-+ { BSC, 0, 0x00, 0x20, 0x00, 0x40, 0x00, 0x50, 0x70, 0x90, 0xd0, 0xff },
-+ { SCS, 0, 0x00, 0x20, 0x00, 0x40, 0xe8, 0x50, 0x70, 0x90, 0xd0, 0xff },
-+ { AMD, 1, 0x80, 0x30, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 },
-+ { SST, 1, 0x80, 0x50, 0x10, 0xa0, 0x00, 0x00, 0x00, 0x90, 0x00, 0xf0 },
-+ { 0 }
-+};
++#else /* BINOSL */
+
-+unlock_cmd_t unlock_cmd_amd = {
-+#ifdef MIPSEB
-+/* addr: */ { 0x0aa8, 0x0556},
-+#else
-+/* addr: */ { 0x0aaa, 0x0554},
++/* string library */
++#ifndef LINUX_OSL
++#undef printf
++#define printf(fmt, args...) osl_printf((fmt), ## args)
++#undef sprintf
++#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args)
++#undef strcmp
++#define strcmp(s1, s2) osl_strcmp((s1), (s2))
++#undef strncmp
++#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n))
++#undef strlen
++#define strlen(s) osl_strlen((s))
++#undef strcpy
++#define strcpy(d, s) osl_strcpy((d), (s))
++#undef strncpy
++#define strncpy(d, s, n) osl_strncpy((d), (s), (n))
+#endif
-+/* data: */ { 0xaa, 0x55}
-+};
++extern int osl_printf(const char *format, ...);
++extern int osl_sprintf(char *buf, const char *format, ...);
++extern int osl_strcmp(const char *s1, const char *s2);
++extern int osl_strncmp(const char *s1, const char *s2, uint n);
++extern int osl_strlen(char *s);
++extern char* osl_strcpy(char *d, const char *s);
++extern char* osl_strncpy(char *d, const char *s, uint n);
+
-+unlock_cmd_t unlock_cmd_sst = {
-+#ifdef MIPSEB
-+/* addr: */ { 0xaaa8, 0x5556},
-+#else
-+/* addr: */ { 0xaaaa, 0x5554},
-+#endif
-+/* data: */ { 0xaa, 0x55}
-+};
++/* register access macros */
++#define R_REG(r) ({ \
++ __typeof(*(r)) __osl_v; \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): __osl_v = osl_readb((volatile uint8*)(r)); break; \
++ case sizeof(uint16): __osl_v = osl_readw((volatile uint16*)(r)); break; \
++ case sizeof(uint32): __osl_v = osl_readl((volatile uint32*)(r)); break; \
++ } \
++ __osl_v; \
++})
++#define W_REG(r, v) do { \
++ switch (sizeof(*(r))) { \
++ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
++ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
++ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
++ } \
++} while (0)
++#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
++#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
++extern uint8 osl_readb(volatile uint8 *r);
++extern uint16 osl_readw(volatile uint16 *r);
++extern uint32 osl_readl(volatile uint32 *r);
++extern void osl_writeb(uint8 v, volatile uint8 *r);
++extern void osl_writew(uint16 v, volatile uint16 *r);
++extern void osl_writel(uint32 v, volatile uint32 *r);
+
-+#define AMD_CMD 0xaaa
-+#define SST_CMD 0xaaaa
++/* bcopy, bcmp, and bzero */
++extern void bcopy(const void *src, void *dst, int len);
++extern int bcmp(const void *b1, const void *b2, int len);
++extern void bzero(void *b, int len);
+
-+/* intel unlock block cmds */
-+#define INTEL_UNLOCK1 0x60
-+#define INTEL_UNLOCK2 0xD0
++/* general purpose memory allocation */
++#define MALLOC(size) osl_malloc((size))
++#define MFREE(addr, size) osl_mfree((char*)(addr), (size))
++extern void *osl_malloc(uint size);
++extern void osl_mfree(void *addr, uint size);
+
-+/* Just eight blocks of 8KB byte each */
++/* uncached virtual address */
++#define OSL_UNCACHED(va) osl_uncached((va))
++extern void *osl_uncached(void *va);
+
-+uint blk8x8k[] = { 0x00000000,
-+ 0x00002000,
-+ 0x00004000,
-+ 0x00006000,
-+ 0x00008000,
-+ 0x0000a000,
-+ 0x0000c000,
-+ 0x0000e000,
-+ 0x00010000
-+};
++/* get processor cycle count */
++#define OSL_GETCYCLES(x) ((x) = osl_getcycles())
++extern uint osl_getcycles(void);
+
-+/* Funky AMD arrangement for 29xx800's */
-+uint amd800[] = { 0x00000000, /* 16KB */
-+ 0x00004000, /* 32KB */
-+ 0x0000c000, /* 8KB */
-+ 0x0000e000, /* 8KB */
-+ 0x00010000, /* 8KB */
-+ 0x00012000, /* 8KB */
-+ 0x00014000, /* 32KB */
-+ 0x0001c000, /* 16KB */
-+ 0x00020000
-+};
++/* dereference an address that may target abort */
++#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr))
++extern int osl_busprobe(uint32 *val, uint32 addr);
+
-+/* AMD arrangement for 29xx160's */
-+uint amd4112[] = { 0x00000000, /* 32KB */
-+ 0x00008000, /* 8KB */
-+ 0x0000a000, /* 8KB */
-+ 0x0000c000, /* 16KB */
-+ 0x00010000
-+};
-+uint amd2114[] = { 0x00000000, /* 16KB */
-+ 0x00004000, /* 8KB */
-+ 0x00006000, /* 8KB */
-+ 0x00008000, /* 32KB */
-+ 0x00010000
-+};
++/* map/unmap physical to virtual */
++#define REG_MAP(pa, size) osl_reg_map((pa), (size))
++#define REG_UNMAP(va) osl_reg_unmap((va))
++extern void *osl_reg_map(uint32 pa, uint size);
++extern void osl_reg_unmap(void *va);
+
++/* allocate/free shared (dma-able) consistent (uncached) memory */
++#define DMA_ALLOC_CONSISTENT(dev, size, pap) \
++ osl_dma_alloc_consistent((dev), (size), (pap))
++#define DMA_FREE_CONSISTENT(dev, va, size, pa) \
++ osl_dma_free_consistent((dev), (void*)(va), (size), (pa))
++extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap);
++extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa);
+
++/* map/unmap direction */
++#define DMA_TX 1
++#define DMA_RX 2
+
-+flash_desc_t flashes[] = {
-+ { 0x00b0, 0x00d0, 0x0200000, 2, SCS, 0x10000, 32, 0, 31, 0, NULL, "Intel 28F160S3/5 1Mx16" },
-+ { 0x00b0, 0x00d4, 0x0400000, 2, SCS, 0x10000, 64, 0, 63, 0, NULL, "Intel 28F320S3/5 2Mx16" },
-+ { 0x0089, 0x8890, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" },
-+ { 0x0089, 0x8891, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" },
-+ { 0x0089, 0x8896, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" },
-+ { 0x0089, 0x8897, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" },
-+ { 0x0089, 0x8898, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" },
-+ { 0x0089, 0x8899, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" },
-+ { 0x0089, 0x88C2, 0x0200000, 2, BSC, 0x10000, 32, 0, 30, 8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" },
-+ { 0x0089, 0x88C3, 0x0200000, 2, BSC, 0x10000, 32, 1, 31, 8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" },
-+ { 0x0089, 0x88C4, 0x0400000, 2, BSC, 0x10000, 64, 0, 62, 8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" },
-+ { 0x0089, 0x88C5, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" },
-+ { 0x0089, 0x88CC, 0x0800000, 2, BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" },
-+ { 0x0089, 0x88CD, 0x0800000, 2, BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" },
-+ { 0x0089, 0x0014, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J5 2Mx16" },
-+ { 0x0089, 0x0015, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J5 4Mx16" },
-+ { 0x0089, 0x0016, 0x0400000, 2, SCS, 0x20000, 32, 0, 31, 0, NULL, "Intel 28F320J3 2Mx16" },
-+ { 0x0089, 0x0017, 0x0800000, 2, SCS, 0x20000, 64, 0, 63, 0, NULL, "Intel 28F640J3 4Mx16" },
-+ { 0x0089, 0x0018, 0x1000000, 2, SCS, 0x20000, 128, 0, 127, 0, NULL, "Intel 28F128J3 8Mx16" },
-+ { 0x00b0, 0x00e3, 0x0400000, 2, BSC, 0x10000, 64, 1, 63, 8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" },
-+ { 0x0001, 0x224a, 0x0100000, 2, AMD, 0x10000, 16, 0, 13, 8, amd800, "AMD 29DL800BT 512Kx16 TopB" },
-+ { 0x0001, 0x22cb, 0x0100000, 2, AMD, 0x10000, 16, 2, 15, 8, amd800, "AMD 29DL800BB 512Kx16 BotB" },
-+ { 0x0001, 0x22c4, 0x0200000, 2, AMD, 0x10000, 32, 0, 30, 4, amd2114, "AMD 29lv160DT 1Mx16 TopB" },
-+ { 0x0001, 0x2249, 0x0200000, 2, AMD, 0x10000, 32, 1, 31, 4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
-+ { 0x0001, 0x22f6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
-+ { 0x0001, 0x22f9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
-+ { 0x0001, 0x2201, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
-+ { 0x0001, 0x2200, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
-+ { 0x0020, 0x22CA, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "ST 29w320DT 2Mx16 TopB" },
-+ { 0x0020, 0x22CB, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "ST 29w320DB 2Mx16 BotB" },
-+ { 0x00C2, 0x00A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+ { 0x00C2, 0x00A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+ { 0x0004, 0x22F6, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MBM29LV320TE 2Mx16 TopB" },
-+ { 0x0004, 0x22F9, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MBM29LV320BE 2Mx16 BotB" },
-+ { 0x0098, 0x009A, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "TC58FVT321 2Mx16 TopB" },
-+ { 0x0098, 0x009C, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "TC58FVB321 2Mx16 BotB" },
-+ { 0x00C2, 0x22A7, 0x0400000, 2, AMD, 0x10000, 64, 0, 62, 4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+ { 0x00C2, 0x22A8, 0x0400000, 2, AMD, 0x10000, 64, 1, 63, 4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+ { 0x00BF, 0x2783, 0x0400000, 2, SST, 0x10000, 64, 0, 63, 0, NULL, "SST39VF320 2Mx16" },
-+ { 0, 0, 0, 0, OLD, 0, 0, 0, 0, 0, NULL, NULL },
-+};
++/* map/unmap shared (dma-able) memory */
++#define DMA_MAP(dev, va, size, direction, p) \
++ osl_dma_map((dev), (va), (size), (direction))
++#define DMA_UNMAP(dev, pa, size, direction, p) \
++ osl_dma_unmap((dev), (pa), (size), (direction))
++extern uint osl_dma_map(void *dev, void *va, uint size, int direction);
++extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction);
+
-+#else
++/* microsecond delay */
++#define OSL_DELAY(usec) osl_delay((usec))
++extern void osl_delay(uint usec);
+
-+extern flash_cmds_t flash_cmds[];
-+extern unlock_cmd_t unlock_cmd;
-+extern flash_desc_t flashes[];
++/* shared (dma-able) memory access macros */
++#define R_SM(r) *(r)
++#define W_SM(r, v) (*(r) = (v))
++#define BZERO_SM(r, len) bzero((r), (len))
+
-+#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h 2005-08-28 11:12:20.437858088 +0200
-@@ -0,0 +1,34 @@
++/* packet primitives */
++#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send))
++#define PKTFREE(drv, skb, send) osl_pktfree((skb))
++#define PKTDATA(drv, skb) osl_pktdata((drv), (skb))
++#define PKTLEN(drv, skb) osl_pktlen((drv), (skb))
++#define PKTNEXT(drv, skb) osl_pktnext((drv), (skb))
++#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x))
++#define PKTSETLEN(drv, skb, len) osl_pktsetlen((drv), (skb), (len))
++#define PKTPUSH(drv, skb, bytes) osl_pktpush((drv), (skb), (bytes))
++#define PKTPULL(drv, skb, bytes) osl_pktpull((drv), (skb), (bytes))
++#define PKTDUP(drv, skb) osl_pktdup((drv), (skb))
++#define PKTCOOKIE(skb) osl_pktcookie((skb))
++#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x))
++#define PKTLINK(skb) osl_pktlink((skb))
++#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x))
++extern void *osl_pktget(void *drv, uint len, bool send);
++extern void osl_pktfree(void *skb);
++extern uchar *osl_pktdata(void *drv, void *skb);
++extern uint osl_pktlen(void *drv, void *skb);
++extern void *osl_pktnext(void *drv, void *skb);
++extern void osl_pktsetnext(void *skb, void *x);
++extern void osl_pktsetlen(void *drv, void *skb, uint len);
++extern uchar *osl_pktpush(void *drv, void *skb, int bytes);
++extern uchar *osl_pktpull(void *drv, void *skb, int bytes);
++extern void *osl_pktdup(void *drv, void *skb);
++extern void *osl_pktcookie(void *skb);
++extern void osl_pktsetcookie(void *skb, void *x);
++extern void *osl_pktlink(void *skb);
++extern void osl_pktsetlink(void *skb, void *x);
++
++#endif /* BINOSL */
++
++#endif /* _linux_osl_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-08-28 11:12:20.441857480 +0200
+@@ -0,0 +1,326 @@
+/*
-+ * BCM47XX FLASH driver interface
++ * Linux-specific abstractions to gain some independence from linux kernel versions.
++ * Pave over some 2.2 versus 2.4 kernel differences.
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ * $Id$
+ */
+
-+#ifndef _flashutl_h_
-+#define _flashutl_h_
++#ifndef _linuxver_h_
++#define _linuxver_h_
+
-+#define FLASH_BASE 0xbfc00000 /* BCM4710 */
++#include <linux/config.h>
++#include <linux/version.h>
+
-+int flash_init(void* base_addr, char *flash_str);
-+int flash_erase(void);
-+int flash_eraseblk(unsigned long off);
-+int flash_write(unsigned long off, uint16 *src, uint nbytes);
-+unsigned long flash_block_base(unsigned long off);
-+unsigned long flash_block_lim(unsigned long off);
-+int FlashWriteRange(unsigned short* dst, unsigned short* src, unsigned int numbytes);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
++#ifdef __UNDEF_NO_VERSION__
++#undef __NO_VERSION__
++#else
++#define __NO_VERSION__
++#endif
++#endif
+
-+void nvWrite(unsigned short *data, unsigned int len);
++#if defined(MODULE) && defined(MODVERSIONS)
++#include <linux/modversions.h>
++#endif
+
-+/* Global vars */
-+extern char* flashutl_base;
-+extern flash_desc_t* flashutl_desc;
-+extern flash_cmds_t* flashutl_cmd;
++/* linux/malloc.h is deprecated, use linux/slab.h instead. */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
++#include <linux/malloc.h>
++#else
++#include <linux/slab.h>
++#endif
+
-+#endif /* _flashutl_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h 2005-08-28 11:12:20.438857936 +0200
-@@ -0,0 +1,181 @@
-+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA engine definitions.
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
-+ *
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ */
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <asm/io.h>
+
-+#ifndef _hnddma_h_
-+#define _hnddma_h_
++#ifndef __exit
++#define __exit
++#endif
++#ifndef __devexit
++#define __devexit
++#endif
++#ifndef __devinit
++#define __devinit __init
++#endif
++#ifndef __devinitdata
++#define __devinitdata
++#endif
++#ifndef __devexit_p
++#define __devexit_p(x) x
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
++
++#define pci_get_drvdata(dev) (dev)->sysdata
++#define pci_set_drvdata(dev, value) (dev)->sysdata=(value)
+
+/*
-+ * Each DMA processor consists of a transmit channel and a receive channel.
++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
+ */
-+typedef volatile struct {
-+ /* transmit channel */
-+ uint32 xmtcontrol; /* enable, et al */
-+ uint32 xmtaddr; /* descriptor ring base address (4K aligned) */
-+ uint32 xmtptr; /* last descriptor posted to chip */
-+ uint32 xmtstatus; /* current active descriptor, et al */
+
-+ /* receive channel */
-+ uint32 rcvcontrol; /* enable, et al */
-+ uint32 rcvaddr; /* descriptor ring base address (4K aligned) */
-+ uint32 rcvptr; /* last descriptor posted to chip */
-+ uint32 rcvstatus; /* current active descriptor, et al */
-+} dmaregs_t;
++struct pci_device_id {
++ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
++ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
++ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
++ unsigned long driver_data; /* Data private to the driver */
++};
+
-+typedef volatile struct {
-+ /* diag access */
-+ uint32 fifoaddr; /* diag address */
-+ uint32 fifodatalow; /* low 32bits of data */
-+ uint32 fifodatahigh; /* high 32bits of data */
-+ uint32 pad; /* reserved */
-+} dmafifo_t;
++struct pci_driver {
++ struct list_head node;
++ char *name;
++ const struct pci_device_id *id_table; /* NULL if wants all devices */
++ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
++ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
++ void (*suspend)(struct pci_dev *dev); /* Device suspended */
++ void (*resume)(struct pci_dev *dev); /* Device woken up */
++};
+
-+/* transmit channel control */
-+#define XC_XE ((uint32)1 << 0) /* transmit enable */
-+#define XC_SE ((uint32)1 << 1) /* transmit suspend request */
-+#define XC_LE ((uint32)1 << 2) /* loopback enable */
-+#define XC_FL ((uint32)1 << 4) /* flush request */
++#define MODULE_DEVICE_TABLE(type, name)
++#define PCI_ANY_ID (~0)
+
-+/* transmit descriptor table pointer */
-+#define XP_LD_MASK 0xfff /* last valid descriptor */
++/* compatpci.c */
++#define pci_module_init pci_register_driver
++extern int pci_register_driver(struct pci_driver *drv);
++extern void pci_unregister_driver(struct pci_driver *drv);
+
-+/* transmit channel status */
-+#define XS_CD_MASK 0x0fff /* current descriptor pointer */
-+#define XS_XS_MASK 0xf000 /* transmit state */
-+#define XS_XS_SHIFT 12
-+#define XS_XS_DISABLED 0x0000 /* disabled */
-+#define XS_XS_ACTIVE 0x1000 /* active */
-+#define XS_XS_IDLE 0x2000 /* idle wait */
-+#define XS_XS_STOPPED 0x3000 /* stopped */
-+#define XS_XS_SUSP 0x4000 /* suspend pending */
-+#define XS_XE_MASK 0xf0000 /* transmit errors */
-+#define XS_XE_SHIFT 16
-+#define XS_XE_NOERR 0x00000 /* no error */
-+#define XS_XE_DPE 0x10000 /* descriptor protocol error */
-+#define XS_XE_DFU 0x20000 /* data fifo underrun */
-+#define XS_XE_BEBR 0x30000 /* bus error on buffer read */
-+#define XS_XE_BEDA 0x40000 /* bus error on descriptor access */
-+#define XS_FL ((uint32)1 << 20) /* flushed */
++#endif /* PCI registration */
+
-+/* receive channel control */
-+#define RC_RE ((uint32)1 << 0) /* receive enable */
-+#define RC_RO_MASK 0xfe /* receive frame offset */
-+#define RC_RO_SHIFT 1
-+#define RC_FM ((uint32)1 << 8) /* direct fifo receive (pio) mode */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
++#ifdef MODULE
++#define module_init(x) int init_module(void) { return x(); }
++#define module_exit(x) void cleanup_module(void) { x(); }
++#else
++#define module_init(x) __initcall(x);
++#define module_exit(x) __exitcall(x);
++#endif
++#endif
+
-+/* receive descriptor table pointer */
-+#define RP_LD_MASK 0xfff /* last valid descriptor */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
++#define list_for_each(pos, head) \
++ for (pos = (head)->next; pos != (head); pos = pos->next)
++#endif
+
-+/* receive channel status */
-+#define RS_CD_MASK 0x0fff /* current descriptor pointer */
-+#define RS_RS_MASK 0xf000 /* receive state */
-+#define RS_RS_SHIFT 12
-+#define RS_RS_DISABLED 0x0000 /* disabled */
-+#define RS_RS_ACTIVE 0x1000 /* active */
-+#define RS_RS_IDLE 0x2000 /* idle wait */
-+#define RS_RS_STOPPED 0x3000 /* reserved */
-+#define RS_RE_MASK 0xf0000 /* receive errors */
-+#define RS_RE_SHIFT 16
-+#define RS_RE_NOERR 0x00000 /* no error */
-+#define RS_RE_DPE 0x10000 /* descriptor protocol error */
-+#define RS_RE_DFO 0x20000 /* data fifo overflow */
-+#define RS_RE_BEBW 0x30000 /* bus error on buffer write */
-+#define RS_RE_BEDA 0x40000 /* bus error on descriptor access */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
++#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)])
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
++#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
++#endif
+
-+/* fifoaddr */
-+#define FA_OFF_MASK 0xffff /* offset */
-+#define FA_SEL_MASK 0xf0000 /* select */
-+#define FA_SEL_SHIFT 16
-+#define FA_SEL_XDD 0x00000 /* transmit dma data */
-+#define FA_SEL_XDP 0x10000 /* transmit dma pointers */
-+#define FA_SEL_RDD 0x40000 /* receive dma data */
-+#define FA_SEL_RDP 0x50000 /* receive dma pointers */
-+#define FA_SEL_XFD 0x80000 /* transmit fifo data */
-+#define FA_SEL_XFP 0x90000 /* transmit fifo pointers */
-+#define FA_SEL_RFD 0xc0000 /* receive fifo data */
-+#define FA_SEL_RFP 0xd0000 /* receive fifo pointers */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
++#define pci_enable_device(dev) do { } while (0)
++#endif
+
-+/*
-+ * DMA Descriptor
-+ * Descriptors are only read by the hardware, never written back.
-+ */
-+typedef volatile struct {
-+ uint32 ctrl; /* misc control bits & bufcount */
-+ uint32 addr; /* data buffer address */
-+} dmadd_t;
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
++#define net_device device
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
+
+/*
-+ * Each descriptor ring must be 4096byte aligned
-+ * and fit within a single 4096byte page.
++ * DMA mapping
++ *
++ * See linux/Documentation/DMA-mapping.txt
+ */
-+#define DMAMAXRINGSZ 4096
-+#define DMARINGALIGN 4096
+
-+/* control flags */
-+#define CTRL_BC_MASK 0x1fff /* buffer byte count */
-+#define CTRL_EOT ((uint32)1 << 28) /* end of descriptor table */
-+#define CTRL_IOC ((uint32)1 << 29) /* interrupt on completion */
-+#define CTRL_EOF ((uint32)1 << 30) /* end of frame */
-+#define CTRL_SOF ((uint32)1 << 31) /* start of frame */
++#ifndef PCI_DMA_TODEVICE
++#define PCI_DMA_TODEVICE 1
++#define PCI_DMA_FROMDEVICE 2
++#endif
+
-+/* control flags in the range [27:20] are core-specific and not defined here */
-+#define CTRL_CORE_MASK 0x0ff00000
++typedef u32 dma_addr_t;
+
-+/* export structure */
-+typedef volatile struct {
-+ /* rx error counters */
-+ uint rxgiants; /* rx giant frames */
-+ uint rxnobuf; /* rx out of dma descriptors */
-+ /* tx error counters */
-+ uint txnobuf; /* tx out of dma descriptors */
-+} hnddma_t;
++/* Pure 2^n version of get_order */
++static inline int get_order(unsigned long size)
++{
++ int order;
+
-+#ifndef di_t
-+#define di_t void
-+#endif
++ size = (size-1) >> (PAGE_SHIFT-1);
++ order = -1;
++ do {
++ size >>= 1;
++ order++;
++ } while (size);
++ return order;
++}
+
-+/* externs */
-+extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs,
-+ uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset,
-+ uint ddoffset, uint dataoffset, uint *msg_level);
-+extern void dma_detach(di_t *di);
-+extern void dma_txreset(di_t *di);
-+extern void dma_rxreset(di_t *di);
-+extern void dma_txinit(di_t *di);
-+extern bool dma_txenabled(di_t *di);
-+extern void dma_rxinit(di_t *di);
-+extern void dma_rxenable(di_t *di);
-+extern bool dma_rxenabled(di_t *di);
-+extern void dma_txsuspend(di_t *di);
-+extern void dma_txresume(di_t *di);
-+extern bool dma_txsuspended(di_t *di);
-+extern bool dma_txstopped(di_t *di);
-+extern bool dma_rxstopped(di_t *di);
-+extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
-+extern int dma_tx(di_t *di, void *p, uint32 coreflags);
-+extern void dma_fifoloopbackenable(di_t *di);
-+extern void *dma_rx(di_t *di);
-+extern void dma_rxfill(di_t *di);
-+extern void dma_txreclaim(di_t *di, bool forceall);
-+extern void dma_rxreclaim(di_t *di);
-+extern char *dma_dump(di_t *di, char *buf);
-+extern char *dma_dumptx(di_t *di, char *buf);
-+extern char *dma_dumprx(di_t *di, char *buf);
-+extern uint dma_getvar(di_t *di, char *name);
-+extern void *dma_getnexttxp(di_t *di, bool forceall);
-+extern void *dma_getnextrxp(di_t *di, bool forceall);
-+extern void dma_txblock(di_t *di);
-+extern void dma_txunblock(di_t *di);
-+extern uint dma_txactive(di_t *di);
++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
++ dma_addr_t *dma_handle)
++{
++ void *ret;
++ int gfp = GFP_ATOMIC | GFP_DMA;
+
-+#endif /* _hnddma_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h 2005-08-28 11:12:20.439857784 +0200
-@@ -0,0 +1,16 @@
-+/*
-+ * Alternate include file for HND sbmips.h since CFE also ships with
-+ * a sbmips.h.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++ ret = (void *)__get_free_pages(gfp, get_order(size));
++
++ if (ret != NULL) {
++ memset(ret, 0, size);
++ *dma_handle = virt_to_bus(ret);
++ }
++ return ret;
++}
++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
++ void *vaddr, dma_addr_t dma_handle)
++{
++ free_pages((unsigned long)vaddr, get_order(size));
++}
++#ifdef ILSIM
++extern uint pci_map_single(void *dev, void *va, uint size, int direction);
++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
++#else
++#define pci_map_single(cookie, address, size, dir) virt_to_bus(address)
++#define pci_unmap_single(cookie, address, size, dir)
++#endif
++
++#endif /* DMA mapping */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
++
++#define dev_kfree_skb_any(a) dev_kfree_skb(a)
++#define netif_down(dev) do { (dev)->start = 0; } while(0)
++
++/* pcmcia-cs provides its own netdevice compatibility layer */
++#ifndef _COMPAT_NETDEVICE_H
+
-+#include "sbmips.h"
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h 2005-08-28 11:12:20.440857632 +0200
-@@ -0,0 +1,313 @@
+/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * SoftNet
+ *
-+ * $Id$
++ * For pre-softnet kernels we need to tell the upper layer not to
++ * re-enter start_xmit() while we are in there. However softnet
++ * guarantees not to enter while we are in there so there is no need
++ * to do the netif_stop_queue() dance unless the transmit queue really
++ * gets stuck. This should also improve performance according to tests
++ * done by Aman Singla.
+ */
+
-+#ifndef _linux_osl_h_
-+#define _linux_osl_h_
++#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
++#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
++#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy)
+
-+#include <typedefs.h>
++static inline void netif_start_queue(struct net_device *dev)
++{
++ dev->tbusy = 0;
++ dev->interrupt = 0;
++ dev->start = 1;
++}
+
-+/* use current 2.4.x calling conventions */
-+#include <linuxver.h>
++#define netif_queue_stopped(dev) (dev)->tbusy
++#define netif_running(dev) (dev)->start
+
-+/* assert and panic */
-+#define ASSERT(exp) do {} while (0)
++#endif /* _COMPAT_NETDEVICE_H */
+
-+/* PCMCIA attribute space access macros */
-+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
-+ osl_pcmcia_read_attr((osh), (offset), (buf), (size))
-+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
-+ osl_pcmcia_write_attr((osh), (offset), (buf), (size))
-+extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size);
-+extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size);
++#define netif_device_attach(dev) netif_start_queue(dev)
++#define netif_device_detach(dev) netif_stop_queue(dev)
+
-+/* PCI configuration space access macros */
-+#define OSL_PCI_READ_CONFIG(loc, offset, size) \
-+ osl_pci_read_config((loc), (offset), (size))
-+#define OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
-+ osl_pci_write_config((loc), (offset), (size), (val))
-+extern uint32 osl_pci_read_config(void *loc, uint size, uint offset);
-+extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val);
++/* 2.4.x renamed bottom halves to tasklets */
++#define tasklet_struct tq_struct
++static inline void tasklet_schedule(struct tasklet_struct *tasklet)
++{
++ queue_task(tasklet, &tq_immediate);
++ mark_bh(IMMEDIATE_BH);
++}
+
-+/* OSL initialization */
-+#define osl_init() do {} while (0)
++static inline void tasklet_init(struct tasklet_struct *tasklet,
++ void (*func)(unsigned long),
++ unsigned long data)
++{
++ tasklet->next = NULL;
++ tasklet->sync = 0;
++ tasklet->routine = (void (*)(void *))func;
++ tasklet->data = (void *)data;
++}
++#define tasklet_kill(tasklet) {do{} while(0);}
+
-+/* host/bus architecture-specific byte swap */
-+#define BUS_SWAP32(v) (v)
++/* 2.4.x introduced del_timer_sync() */
++#define del_timer_sync(timer) del_timer(timer)
+
-+/*
-+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
-+ * Macros expand to calls to functions defined in linux_osl.c .
-+ */
-+#ifndef BINOSL
++#else
+
-+/* string library, kernel mode */
-+#define printf(fmt, args...) printk(fmt, ## args)
-+#include <linux/kernel.h>
-+#include <linux/string.h>
++#define netif_down(dev)
+
-+/* register access macros */
-+#define R_REG(r) ({ \
-+ __typeof(*(r)) __osl_v; \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): __osl_v = readb((volatile uint8*)(r)); break; \
-+ case sizeof(uint16): __osl_v = readw((volatile uint16*)(r)); break; \
-+ case sizeof(uint32): __osl_v = readl((volatile uint32*)(r)); break; \
-+ } \
-+ __osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \
-+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
-+ } \
-+} while (0)
++#endif /* SoftNet */
+
-+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
+
-+/* bcopy, bcmp, and bzero */
-+#define bcopy(src, dst, len) memcpy((dst), (src), (len))
-+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
-+#define bzero(b, len) memset((b), '\0', (len))
++/*
++ * Emit code to initialise a tq_struct's routine and data pointers
++ */
++#define PREPARE_TQUEUE(_tq, _routine, _data) \
++ do { \
++ (_tq)->routine = _routine; \
++ (_tq)->data = _data; \
++ } while (0)
+
-+/* general purpose memory allocation */
-+#define MALLOC(size) kmalloc((size), GFP_ATOMIC)
-+#define MFREE(addr, size) kfree((addr))
++/*
++ * Emit code to initialise all of a tq_struct
++ */
++#define INIT_TQUEUE(_tq, _routine, _data) \
++ do { \
++ INIT_LIST_HEAD(&(_tq)->list); \
++ (_tq)->sync = 0; \
++ PREPARE_TQUEUE((_tq), (_routine), (_data)); \
++ } while (0)
+
-+/* uncached virtual address */
-+#ifdef mips
-+#define OSL_UNCACHED(va) KSEG1ADDR((va))
-+#include <asm/addrspace.h>
-+#else
-+#define OSL_UNCACHED(va) (va)
+#endif
+
-+/* get processor cycle count */
-+#if defined(mips)
-+#define OSL_GETCYCLES(x) ((x) = read_c0_count() * 2)
-+#elif defined(__i386__)
-+#define OSL_GETCYCLES(x) rdtscl((x))
-+#else
-+#define OSL_GETCYCLES(x) ((x) = 0)
-+#endif
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
+
-+/* dereference an address that may cause a bus exception */
-+#ifdef mips
-+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
-+#define BUSPROBE(val, addr) panic("get_dbe() will not fixup a bus exception when compiled into a module")
-+#else
-+#define BUSPROBE(val, addr) get_dbe((val), (addr))
-+#include <asm/paccess.h>
-+#endif
-+#else
-+#define BUSPROBE(val, addr) ({ (val) = R_REG((addr)); 0; })
-+#endif
++/* Power management related routines */
+
-+/* map/unmap physical to virtual I/O */
-+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
-+#define REG_UNMAP(va) iounmap((void *)(va))
++static inline int
++pci_save_state(struct pci_dev *dev, u32 *buffer)
++{
++ int i;
++ if (buffer) {
++ for (i = 0; i < 16; i++)
++ pci_read_config_dword(dev, i * 4,&buffer[i]);
++ }
++ return 0;
++}
+
-+/* allocate/free shared (dma-able) consistent (uncached) memory */
-+#define DMA_ALLOC_CONSISTENT(dev, size, pap) \
-+ pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap))
-+#define DMA_FREE_CONSISTENT(dev, va, size, pa) \
-+ pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa))
++static inline int
++pci_restore_state(struct pci_dev *dev, u32 *buffer)
++{
++ int i;
+
-+/* map/unmap direction */
-+#define DMA_TX PCI_DMA_TODEVICE
-+#define DMA_RX PCI_DMA_FROMDEVICE
++ if (buffer) {
++ for (i = 0; i < 16; i++)
++ pci_write_config_dword(dev,i * 4, buffer[i]);
++ }
++ /*
++ * otherwise, write the context information we know from bootup.
++ * This works around a problem where warm-booting from Windows
++ * combined with a D3(hot)->D0 transition causes PCI config
++ * header data to be forgotten.
++ */
++ else {
++ for (i = 0; i < 6; i ++)
++ pci_write_config_dword(dev,
++ PCI_BASE_ADDRESS_0 + (i * 4),
++ pci_resource_start(dev, i));
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++ }
++ return 0;
++}
+
-+/* map/unmap shared (dma-able) memory */
-+#define DMA_MAP(dev, va, size, direction, p) \
-+ pci_map_single((dev), (va), (size), (direction))
-+#define DMA_UNMAP(dev, pa, size, direction, p) \
-+ pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction))
-+
-+/* microsecond delay */
-+#define OSL_DELAY(usec) udelay(usec)
-+#include <linux/delay.h>
-+#define OSL_SLEEP(usec) set_current_state(TASK_INTERRUPTIBLE); \
-+ schedule_timeout((usec*HZ)/1000000);
-+#define OSL_IN_INTERRUPT() in_interrupt()
-+
-+/* shared (dma-able) memory access macros */
-+#define R_SM(r) *(r)
-+#define W_SM(r, v) (*(r) = (v))
-+#define BZERO_SM(r, len) memset((r), '\0', (len))
-+
-+/* packet primitives */
-+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send))
-+#define PKTFREE(drv, skb, send) osl_pktfree((skb))
-+#define PKTDATA(drv, skb) (((struct sk_buff*)(skb))->data)
-+#define PKTLEN(drv, skb) (((struct sk_buff*)(skb))->len)
-+#define PKTHEADROOM(drv, skb) (PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head))
-+#define PKTTAILROOM(drv, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
-+#define PKTNEXT(drv, skb) (((struct sk_buff*)(skb))->next)
-+#define PKTSETNEXT(skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
-+#define PKTSETLEN(drv, skb, len) __skb_trim((struct sk_buff*)(skb), (len))
-+#define PKTPUSH(drv, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes))
-+#define PKTPULL(drv, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes))
-+#define PKTDUP(drv, skb) skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
-+#define PKTCOOKIE(skb) ((void*)((struct sk_buff*)(skb))->csum)
-+#define PKTSETCOOKIE(skb, x) (((struct sk_buff*)(skb))->csum = (uint)(x))
-+#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev)
-+#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
-+extern void *osl_pktget(void *drv, uint len, bool send);
-+extern void osl_pktfree(void *skb);
-+
-+#else /* BINOSL */
++#endif /* PCI power management */
+
-+/* string library */
-+#ifndef LINUX_OSL
-+#undef printf
-+#define printf(fmt, args...) osl_printf((fmt), ## args)
-+#undef sprintf
-+#define sprintf(buf, fmt, args...) osl_sprintf((buf), (fmt), ## args)
-+#undef strcmp
-+#define strcmp(s1, s2) osl_strcmp((s1), (s2))
-+#undef strncmp
-+#define strncmp(s1, s2, n) osl_strncmp((s1), (s2), (n))
-+#undef strlen
-+#define strlen(s) osl_strlen((s))
-+#undef strcpy
-+#define strcpy(d, s) osl_strcpy((d), (s))
-+#undef strncpy
-+#define strncpy(d, s, n) osl_strncpy((d), (s), (n))
++/* Old cp0 access macros deprecated in 2.4.19 */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
+#endif
-+extern int osl_printf(const char *format, ...);
-+extern int osl_sprintf(char *buf, const char *format, ...);
-+extern int osl_strcmp(const char *s1, const char *s2);
-+extern int osl_strncmp(const char *s1, const char *s2, uint n);
-+extern int osl_strlen(char *s);
-+extern char* osl_strcpy(char *d, const char *s);
-+extern char* osl_strncpy(char *d, const char *s, uint n);
+
-+/* register access macros */
-+#define R_REG(r) ({ \
-+ __typeof(*(r)) __osl_v; \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): __osl_v = osl_readb((volatile uint8*)(r)); break; \
-+ case sizeof(uint16): __osl_v = osl_readw((volatile uint16*)(r)); break; \
-+ case sizeof(uint32): __osl_v = osl_readl((volatile uint32*)(r)); break; \
-+ } \
-+ __osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+ switch (sizeof(*(r))) { \
-+ case sizeof(uint8): osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+ case sizeof(uint16): osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
-+ case sizeof(uint32): osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
-+ } \
-+} while (0)
-+#define AND_REG(r, v) W_REG((r), R_REG(r) & (v))
-+#define OR_REG(r, v) W_REG((r), R_REG(r) | (v))
-+extern uint8 osl_readb(volatile uint8 *r);
-+extern uint16 osl_readw(volatile uint16 *r);
-+extern uint32 osl_readl(volatile uint32 *r);
-+extern void osl_writeb(uint8 v, volatile uint8 *r);
-+extern void osl_writew(uint16 v, volatile uint16 *r);
-+extern void osl_writel(uint32 v, volatile uint32 *r);
++#endif /* _linuxver_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h 2005-08-28 11:12:20.441857480 +0200
+@@ -0,0 +1,62 @@
++/*
++ * Broadcom Home Gateway Reference Design
++ * Ports Web Page Configuration Support Routines
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id$
++ */
+
-+/* bcopy, bcmp, and bzero */
-+extern void bcopy(const void *src, void *dst, int len);
-+extern int bcmp(const void *b1, const void *b2, int len);
-+extern void bzero(void *b, int len);
++#ifndef _nvports_h_
++#define _nvports_h_
+
-+/* general purpose memory allocation */
-+#define MALLOC(size) osl_malloc((size))
-+#define MFREE(addr, size) osl_mfree((char*)(addr), (size))
-+extern void *osl_malloc(uint size);
-+extern void osl_mfree(void *addr, uint size);
++#define uint32 unsigned long
++#define uint16 unsigned short
++#define uint unsigned int
++#define uint8 unsigned char
++#define uint64 unsigned long long
+
-+/* uncached virtual address */
-+#define OSL_UNCACHED(va) osl_uncached((va))
-+extern void *osl_uncached(void *va);
++enum FORCE_PORT {
++ FORCE_OFF,
++ FORCE_10H,
++ FORCE_10F,
++ FORCE_100H,
++ FORCE_100F,
++ FORCE_DOWN,
++ POWER_OFF
++};
+
-+/* get processor cycle count */
-+#define OSL_GETCYCLES(x) ((x) = osl_getcycles())
-+extern uint osl_getcycles(void);
++typedef struct _PORT_ATTRIBS
++{
++ uint autoneg;
++ uint force;
++ uint native;
++} PORT_ATTRIBS;
+
-+/* dereference an address that may target abort */
-+#define BUSPROBE(val, addr) osl_busprobe(&(val), (addr))
-+extern int osl_busprobe(uint32 *val, uint32 addr);
++extern uint
++nvExistsPortAttrib(char *attrib, uint portno);
+
-+/* map/unmap physical to virtual */
-+#define REG_MAP(pa, size) osl_reg_map((pa), (size))
-+#define REG_UNMAP(va) osl_reg_unmap((va))
-+extern void *osl_reg_map(uint32 pa, uint size);
-+extern void osl_reg_unmap(void *va);
++extern int
++nvExistsAnyForcePortAttrib(uint portno);
+
-+/* allocate/free shared (dma-able) consistent (uncached) memory */
-+#define DMA_ALLOC_CONSISTENT(dev, size, pap) \
-+ osl_dma_alloc_consistent((dev), (size), (pap))
-+#define DMA_FREE_CONSISTENT(dev, va, size, pa) \
-+ osl_dma_free_consistent((dev), (void*)(va), (size), (pa))
-+extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap);
-+extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa);
++extern void
++nvSetPortAttrib(char *attrib, uint portno);
+
-+/* map/unmap direction */
-+#define DMA_TX 1
-+#define DMA_RX 2
++extern void
++nvUnsetPortAttrib(char *attrib, uint portno);
+
-+/* map/unmap shared (dma-able) memory */
-+#define DMA_MAP(dev, va, size, direction, p) \
-+ osl_dma_map((dev), (va), (size), (direction))
-+#define DMA_UNMAP(dev, pa, size, direction, p) \
-+ osl_dma_unmap((dev), (pa), (size), (direction))
-+extern uint osl_dma_map(void *dev, void *va, uint size, int direction);
-+extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction);
++extern void
++nvUnsetAllForcePortAttrib(uint portno);
+
-+/* microsecond delay */
-+#define OSL_DELAY(usec) osl_delay((usec))
-+extern void osl_delay(uint usec);
++extern PORT_ATTRIBS
++nvGetSwitchPortAttribs(uint portno);
+
-+/* shared (dma-able) memory access macros */
-+#define R_SM(r) *(r)
-+#define W_SM(r, v) (*(r) = (v))
-+#define BZERO_SM(r, len) bzero((r), (len))
++#endif /* _nvports_h_ */
+
-+/* packet primitives */
-+#define PKTGET(drv, len, send) osl_pktget((drv), (len), (send))
-+#define PKTFREE(drv, skb, send) osl_pktfree((skb))
-+#define PKTDATA(drv, skb) osl_pktdata((drv), (skb))
-+#define PKTLEN(drv, skb) osl_pktlen((drv), (skb))
-+#define PKTNEXT(drv, skb) osl_pktnext((drv), (skb))
-+#define PKTSETNEXT(skb, x) osl_pktsetnext((skb), (x))
-+#define PKTSETLEN(drv, skb, len) osl_pktsetlen((drv), (skb), (len))
-+#define PKTPUSH(drv, skb, bytes) osl_pktpush((drv), (skb), (bytes))
-+#define PKTPULL(drv, skb, bytes) osl_pktpull((drv), (skb), (bytes))
-+#define PKTDUP(drv, skb) osl_pktdup((drv), (skb))
-+#define PKTCOOKIE(skb) osl_pktcookie((skb))
-+#define PKTSETCOOKIE(skb, x) osl_pktsetcookie((skb), (x))
-+#define PKTLINK(skb) osl_pktlink((skb))
-+#define PKTSETLINK(skb, x) osl_pktsetlink((skb), (x))
-+extern void *osl_pktget(void *drv, uint len, bool send);
-+extern void osl_pktfree(void *skb);
-+extern uchar *osl_pktdata(void *drv, void *skb);
-+extern uint osl_pktlen(void *drv, void *skb);
-+extern void *osl_pktnext(void *drv, void *skb);
-+extern void osl_pktsetnext(void *skb, void *x);
-+extern void osl_pktsetlen(void *drv, void *skb, uint len);
-+extern uchar *osl_pktpush(void *drv, void *skb, int bytes);
-+extern uchar *osl_pktpull(void *drv, void *skb, int bytes);
-+extern void *osl_pktdup(void *drv, void *skb);
-+extern void *osl_pktcookie(void *skb);
-+extern void osl_pktsetcookie(void *skb, void *x);
-+extern void *osl_pktlink(void *skb);
-+extern void osl_pktsetlink(void *skb, void *x);
+
-+#endif /* BINOSL */
+
-+#endif /* _linux_osl_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h 2005-08-28 11:12:20.441857480 +0200
-@@ -0,0 +1,326 @@
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h 2005-08-28 11:12:20.441857480 +0200
+@@ -0,0 +1,38 @@
+/*
-+ * Linux-specific abstractions to gain some independence from linux kernel versions.
-+ * Pave over some 2.2 versus 2.4 kernel differences.
-+ *
++ * OS Independent Layer
++ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * $Id$
+ */
+
-+#ifndef _linuxver_h_
-+#define _linuxver_h_
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
-+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
-+#ifdef __UNDEF_NO_VERSION__
-+#undef __NO_VERSION__
-+#else
-+#define __NO_VERSION__
-+#endif
-+#endif
-+
-+#if defined(MODULE) && defined(MODVERSIONS)
-+#include <linux/modversions.h>
-+#endif
++#ifndef _osl_h_
++#define _osl_h_
+
-+/* linux/malloc.h is deprecated, use linux/slab.h instead. */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
-+#include <linux/malloc.h>
++#ifdef V2_HAL
++#include <v2hal_osl.h>
++#elif defined(linux)
++#include <linux_osl.h>
++#elif PMON
++#include <pmon_osl.h>
++#elif defined(NDIS)
++#include <ndis_osl.h>
++#elif defined(_CFE_)
++#include <cfe_osl.h>
++#elif defined(MACOS9)
++#include <macos9_osl.h>
++#elif defined(MACOSX)
++#include <macosx_osl.h>
+#else
-+#include <linux/slab.h>
-+#endif
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <asm/io.h>
-+
-+#ifndef __exit
-+#define __exit
-+#endif
-+#ifndef __devexit
-+#define __devexit
-+#endif
-+#ifndef __devinit
-+#define __devinit __init
-+#endif
-+#ifndef __devinitdata
-+#define __devinitdata
-+#endif
-+#ifndef __devexit_p
-+#define __devexit_p(x) x
++#error "Unsupported OSL requested"
+#endif
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
-+
-+#define pci_get_drvdata(dev) (dev)->sysdata
-+#define pci_set_drvdata(dev, value) (dev)->sysdata=(value)
++/* handy */
++#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
+
++#endif /* _osl_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-08-28 11:12:20.442857328 +0200
+@@ -0,0 +1,362 @@
+/*
-+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
++ * pcicfg.h: PCI configuration constants and structures.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
+ */
+
-+struct pci_device_id {
-+ unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
-+ unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
-+ unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
-+ unsigned long driver_data; /* Data private to the driver */
-+};
-+
-+struct pci_driver {
-+ struct list_head node;
-+ char *name;
-+ const struct pci_device_id *id_table; /* NULL if wants all devices */
-+ int (*probe)(struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
-+ void (*remove)(struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
-+ void (*suspend)(struct pci_dev *dev); /* Device suspended */
-+ void (*resume)(struct pci_dev *dev); /* Device woken up */
-+};
-+
-+#define MODULE_DEVICE_TABLE(type, name)
-+#define PCI_ANY_ID (~0)
-+
-+/* compatpci.c */
-+#define pci_module_init pci_register_driver
-+extern int pci_register_driver(struct pci_driver *drv);
-+extern void pci_unregister_driver(struct pci_driver *drv);
-+
-+#endif /* PCI registration */
++#ifndef _h_pci_
++#define _h_pci_
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
-+#ifdef MODULE
-+#define module_init(x) int init_module(void) { return x(); }
-+#define module_exit(x) void cleanup_module(void) { x(); }
-+#else
-+#define module_init(x) __initcall(x);
-+#define module_exit(x) __exitcall(x);
-+#endif
++/* The following inside ifndef's so we don't collide with NTDDK.H */
++#ifndef PCI_MAX_BUS
++#define PCI_MAX_BUS 0x100
+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
-+#define list_for_each(pos, head) \
-+ for (pos = (head)->next; pos != (head); pos = pos->next)
++#ifndef PCI_MAX_DEVICES
++#define PCI_MAX_DEVICES 0x20
+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
-+#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)])
-+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
-+#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
++#ifndef PCI_MAX_FUNCTION
++#define PCI_MAX_FUNCTION 0x8
+#endif
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
-+#define pci_enable_device(dev) do { } while (0)
++#ifndef PCI_INVALID_VENDORID
++#define PCI_INVALID_VENDORID 0xffff
+#endif
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
-+#define net_device device
++#ifndef PCI_INVALID_DEVICEID
++#define PCI_INVALID_DEVICEID 0xffff
+#endif
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
+
-+/*
-+ * DMA mapping
-+ *
-+ * See linux/Documentation/DMA-mapping.txt
-+ */
++/* Convert between bus-slot-function-register and config addresses */
+
-+#ifndef PCI_DMA_TODEVICE
-+#define PCI_DMA_TODEVICE 1
-+#define PCI_DMA_FROMDEVICE 2
-+#endif
++#define PCICFG_BUS_SHIFT 16 /* Bus shift */
++#define PCICFG_SLOT_SHIFT 11 /* Slot shift */
++#define PCICFG_FUN_SHIFT 8 /* Function shift */
++#define PCICFG_OFF_SHIFT 0 /* Bus shift */
+
-+typedef u32 dma_addr_t;
++#define PCICFG_BUS_MASK 0xff /* Bus mask */
++#define PCICFG_SLOT_MASK 0x1f /* Slot mask */
++#define PCICFG_FUN_MASK 7 /* Function mask */
++#define PCICFG_OFF_MASK 0xff /* Bus mask */
+
-+/* Pure 2^n version of get_order */
-+static inline int get_order(unsigned long size)
-+{
-+ int order;
++#define PCI_CONFIG_ADDR(b, s, f, o) \
++ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \
++ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \
++ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \
++ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
+
-+ size = (size-1) >> (PAGE_SHIFT-1);
-+ order = -1;
-+ do {
-+ size >>= 1;
-+ order++;
-+ } while (size);
-+ return order;
-+}
++#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
++#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
++#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
++#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
+
-+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-+ dma_addr_t *dma_handle)
-+{
-+ void *ret;
-+ int gfp = GFP_ATOMIC | GFP_DMA;
+
-+ ret = (void *)__get_free_pages(gfp, get_order(size));
++/* The actual config space */
+
-+ if (ret != NULL) {
-+ memset(ret, 0, size);
-+ *dma_handle = virt_to_bus(ret);
-+ }
-+ return ret;
-+}
-+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-+ void *vaddr, dma_addr_t dma_handle)
-+{
-+ free_pages((unsigned long)vaddr, get_order(size));
-+}
-+#ifdef ILSIM
-+extern uint pci_map_single(void *dev, void *va, uint size, int direction);
-+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
-+#else
-+#define pci_map_single(cookie, address, size, dir) virt_to_bus(address)
-+#define pci_unmap_single(cookie, address, size, dir)
-+#endif
++#define PCI_BAR_MAX 6
+
-+#endif /* DMA mapping */
++#define PCI_ROM_BAR 8
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
++#define PCR_RSVDA_MAX 2
+
-+#define dev_kfree_skb_any(a) dev_kfree_skb(a)
-+#define netif_down(dev) do { (dev)->start = 0; } while(0)
++typedef struct _pci_config_regs {
++ unsigned short vendor;
++ unsigned short device;
++ unsigned short command;
++ unsigned short status;
++ unsigned char rev_id;
++ unsigned char prog_if;
++ unsigned char sub_class;
++ unsigned char base_class;
++ unsigned char cache_line_size;
++ unsigned char latency_timer;
++ unsigned char header_type;
++ unsigned char bist;
++ unsigned long base[PCI_BAR_MAX];
++ unsigned long cardbus_cis;
++ unsigned short subsys_vendor;
++ unsigned short subsys_id;
++ unsigned long baserom;
++ unsigned long rsvd_a[PCR_RSVDA_MAX];
++ unsigned char int_line;
++ unsigned char int_pin;
++ unsigned char min_gnt;
++ unsigned char max_lat;
++ unsigned char dev_dep[192];
++} pci_config_regs;
+
-+/* pcmcia-cs provides its own netdevice compatibility layer */
-+#ifndef _COMPAT_NETDEVICE_H
++#define SZPCR (sizeof (pci_config_regs))
++#define MINSZPCR 64 /* offsetof (dev_dep[0] */
+
-+/*
-+ * SoftNet
-+ *
-+ * For pre-softnet kernels we need to tell the upper layer not to
-+ * re-enter start_xmit() while we are in there. However softnet
-+ * guarantees not to enter while we are in there so there is no need
-+ * to do the netif_stop_queue() dance unless the transmit queue really
-+ * gets stuck. This should also improve performance according to tests
-+ * done by Aman Singla.
++/* A structure for the config registers is nice, but in most
++ * systems the config space is not memory mapped, so we need
++ * filed offsetts. :-(
+ */
++#define PCI_CFG_VID 0
++#define PCI_CFG_DID 2
++#define PCI_CFG_CMD 4
++#define PCI_CFG_STAT 6
++#define PCI_CFG_REV 8
++#define PCI_CFG_PROGIF 9
++#define PCI_CFG_SUBCL 0xa
++#define PCI_CFG_BASECL 0xb
++#define PCI_CFG_CLSZ 0xc
++#define PCI_CFG_LATTIM 0xd
++#define PCI_CFG_HDR 0xe
++#define PCI_CFG_BIST 0xf
++#define PCI_CFG_BAR0 0x10
++#define PCI_CFG_BAR1 0x14
++#define PCI_CFG_BAR2 0x18
++#define PCI_CFG_BAR3 0x1c
++#define PCI_CFG_BAR4 0x20
++#define PCI_CFG_BAR5 0x24
++#define PCI_CFG_CIS 0x28
++#define PCI_CFG_SVID 0x2c
++#define PCI_CFG_SSID 0x2e
++#define PCI_CFG_ROMBAR 0x30
++#define PCI_CFG_INT 0x3c
++#define PCI_CFG_PIN 0x3d
++#define PCI_CFG_MINGNT 0x3e
++#define PCI_CFG_MAXLAT 0x3f
+
-+#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
-+#define netif_wake_queue(dev) do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
-+#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy)
-+
-+static inline void netif_start_queue(struct net_device *dev)
-+{
-+ dev->tbusy = 0;
-+ dev->interrupt = 0;
-+ dev->start = 1;
-+}
-+
-+#define netif_queue_stopped(dev) (dev)->tbusy
-+#define netif_running(dev) (dev)->start
-+
-+#endif /* _COMPAT_NETDEVICE_H */
++/* Classes and subclasses */
+
-+#define netif_device_attach(dev) netif_start_queue(dev)
-+#define netif_device_detach(dev) netif_stop_queue(dev)
++typedef enum {
++ PCI_CLASS_OLD = 0,
++ PCI_CLASS_DASDI,
++ PCI_CLASS_NET,
++ PCI_CLASS_DISPLAY,
++ PCI_CLASS_MMEDIA,
++ PCI_CLASS_MEMORY,
++ PCI_CLASS_BRIDGE,
++ PCI_CLASS_COMM,
++ PCI_CLASS_BASE,
++ PCI_CLASS_INPUT,
++ PCI_CLASS_DOCK,
++ PCI_CLASS_CPU,
++ PCI_CLASS_SERIAL,
++ PCI_CLASS_INTELLIGENT = 0xe,
++ PCI_CLASS_SATELLITE,
++ PCI_CLASS_CRYPT,
++ PCI_CLASS_DSP,
++ PCI_CLASS_MAX
++} pci_classes;
+
-+/* 2.4.x renamed bottom halves to tasklets */
-+#define tasklet_struct tq_struct
-+static inline void tasklet_schedule(struct tasklet_struct *tasklet)
-+{
-+ queue_task(tasklet, &tq_immediate);
-+ mark_bh(IMMEDIATE_BH);
-+}
++typedef enum {
++ PCI_DASDI_SCSI,
++ PCI_DASDI_IDE,
++ PCI_DASDI_FLOPPY,
++ PCI_DASDI_IPI,
++ PCI_DASDI_RAID,
++ PCI_DASDI_OTHER = 0x80
++} pci_dasdi_subclasses;
+
-+static inline void tasklet_init(struct tasklet_struct *tasklet,
-+ void (*func)(unsigned long),
-+ unsigned long data)
-+{
-+ tasklet->next = NULL;
-+ tasklet->sync = 0;
-+ tasklet->routine = (void (*)(void *))func;
-+ tasklet->data = (void *)data;
-+}
-+#define tasklet_kill(tasklet) {do{} while(0);}
++typedef enum {
++ PCI_NET_ETHER,
++ PCI_NET_TOKEN,
++ PCI_NET_FDDI,
++ PCI_NET_ATM,
++ PCI_NET_OTHER = 0x80
++} pci_net_subclasses;
+
-+/* 2.4.x introduced del_timer_sync() */
-+#define del_timer_sync(timer) del_timer(timer)
++typedef enum {
++ PCI_DISPLAY_VGA,
++ PCI_DISPLAY_XGA,
++ PCI_DISPLAY_3D,
++ PCI_DISPLAY_OTHER = 0x80
++} pci_display_subclasses;
+
-+#else
++typedef enum {
++ PCI_MMEDIA_VIDEO,
++ PCI_MMEDIA_AUDIO,
++ PCI_MMEDIA_PHONE,
++ PCI_MEDIA_OTHER = 0x80
++} pci_mmedia_subclasses;
+
-+#define netif_down(dev)
++typedef enum {
++ PCI_MEMORY_RAM,
++ PCI_MEMORY_FLASH,
++ PCI_MEMORY_OTHER = 0x80
++} pci_memory_subclasses;
+
-+#endif /* SoftNet */
++typedef enum {
++ PCI_BRIDGE_HOST,
++ PCI_BRIDGE_ISA,
++ PCI_BRIDGE_EISA,
++ PCI_BRIDGE_MC,
++ PCI_BRIDGE_PCI,
++ PCI_BRIDGE_PCMCIA,
++ PCI_BRIDGE_NUBUS,
++ PCI_BRIDGE_CARDBUS,
++ PCI_BRIDGE_RACEWAY,
++ PCI_BRIDGE_OTHER = 0x80
++} pci_bridge_subclasses;
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
++typedef enum {
++ PCI_COMM_UART,
++ PCI_COMM_PARALLEL,
++ PCI_COMM_MULTIUART,
++ PCI_COMM_MODEM,
++ PCI_COMM_OTHER = 0x80
++} pci_comm_subclasses;
+
-+/*
-+ * Emit code to initialise a tq_struct's routine and data pointers
-+ */
-+#define PREPARE_TQUEUE(_tq, _routine, _data) \
-+ do { \
-+ (_tq)->routine = _routine; \
-+ (_tq)->data = _data; \
-+ } while (0)
++typedef enum {
++ PCI_BASE_PIC,
++ PCI_BASE_DMA,
++ PCI_BASE_TIMER,
++ PCI_BASE_RTC,
++ PCI_BASE_PCI_HOTPLUG,
++ PCI_BASE_OTHER = 0x80
++} pci_base_subclasses;
+
-+/*
-+ * Emit code to initialise all of a tq_struct
-+ */
-+#define INIT_TQUEUE(_tq, _routine, _data) \
-+ do { \
-+ INIT_LIST_HEAD(&(_tq)->list); \
-+ (_tq)->sync = 0; \
-+ PREPARE_TQUEUE((_tq), (_routine), (_data)); \
-+ } while (0)
++typedef enum {
++ PCI_INPUT_KBD,
++ PCI_INPUT_PEN,
++ PCI_INPUT_MOUSE,
++ PCI_INPUT_SCANNER,
++ PCI_INPUT_GAMEPORT,
++ PCI_INPUT_OTHER = 0x80
++} pci_input_subclasses;
+
-+#endif
++typedef enum {
++ PCI_DOCK_GENERIC,
++ PCI_DOCK_OTHER = 0x80
++} pci_dock_subclasses;
+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
++typedef enum {
++ PCI_CPU_386,
++ PCI_CPU_486,
++ PCI_CPU_PENTIUM,
++ PCI_CPU_ALPHA = 0x10,
++ PCI_CPU_POWERPC = 0x20,
++ PCI_CPU_MIPS = 0x30,
++ PCI_CPU_COPROC = 0x40,
++ PCI_CPU_OTHER = 0x80
++} pci_cpu_subclasses;
+
-+/* Power management related routines */
++typedef enum {
++ PCI_SERIAL_IEEE1394,
++ PCI_SERIAL_ACCESS,
++ PCI_SERIAL_SSA,
++ PCI_SERIAL_USB,
++ PCI_SERIAL_FIBER,
++ PCI_SERIAL_SMBUS,
++ PCI_SERIAL_OTHER = 0x80
++} pci_serial_subclasses;
+
-+static inline int
-+pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{
-+ int i;
-+ if (buffer) {
-+ for (i = 0; i < 16; i++)
-+ pci_read_config_dword(dev, i * 4,&buffer[i]);
-+ }
-+ return 0;
-+}
++typedef enum {
++ PCI_INTELLIGENT_I2O,
++} pci_intelligent_subclasses;
+
-+static inline int
-+pci_restore_state(struct pci_dev *dev, u32 *buffer)
-+{
-+ int i;
++typedef enum {
++ PCI_SATELLITE_TV,
++ PCI_SATELLITE_AUDIO,
++ PCI_SATELLITE_VOICE,
++ PCI_SATELLITE_DATA,
++ PCI_SATELLITE_OTHER = 0x80
++} pci_satellite_subclasses;
+
-+ if (buffer) {
-+ for (i = 0; i < 16; i++)
-+ pci_write_config_dword(dev,i * 4, buffer[i]);
-+ }
-+ /*
-+ * otherwise, write the context information we know from bootup.
-+ * This works around a problem where warm-booting from Windows
-+ * combined with a D3(hot)->D0 transition causes PCI config
-+ * header data to be forgotten.
-+ */
-+ else {
-+ for (i = 0; i < 6; i ++)
-+ pci_write_config_dword(dev,
-+ PCI_BASE_ADDRESS_0 + (i * 4),
-+ pci_resource_start(dev, i));
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-+ }
-+ return 0;
-+}
++typedef enum {
++ PCI_CRYPT_NETWORK,
++ PCI_CRYPT_ENTERTAINMENT,
++ PCI_CRYPT_OTHER = 0x80
++} pci_crypt_subclasses;
+
-+#endif /* PCI power management */
++typedef enum {
++ PCI_DSP_DPIO,
++ PCI_DSP_OTHER = 0x80
++} pci_dsp_subclasses;
+
-+/* Old cp0 access macros deprecated in 2.4.19 */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
-+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
-+#endif
++/* Header types */
++typedef enum {
++ PCI_HEADER_NORMAL,
++ PCI_HEADER_BRIDGE,
++ PCI_HEADER_CARDBUS
++} pci_header_types;
+
-+#endif /* _linuxver_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h 2005-08-28 11:12:20.441857480 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * Broadcom Home Gateway Reference Design
-+ * Ports Web Page Configuration Support Routines
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef _nvports_h_
-+#define _nvports_h_
-+
-+#define uint32 unsigned long
-+#define uint16 unsigned short
-+#define uint unsigned int
-+#define uint8 unsigned char
-+#define uint64 unsigned long long
-+
-+enum FORCE_PORT {
-+ FORCE_OFF,
-+ FORCE_10H,
-+ FORCE_10F,
-+ FORCE_100H,
-+ FORCE_100F,
-+ FORCE_DOWN,
-+ POWER_OFF
-+};
-+
-+typedef struct _PORT_ATTRIBS
-+{
-+ uint autoneg;
-+ uint force;
-+ uint native;
-+} PORT_ATTRIBS;
+
-+extern uint
-+nvExistsPortAttrib(char *attrib, uint portno);
++/* Overlay for a PCI-to-PCI bridge */
+
-+extern int
-+nvExistsAnyForcePortAttrib(uint portno);
++#define PPB_RSVDA_MAX 2
++#define PPB_RSVDD_MAX 8
+
-+extern void
-+nvSetPortAttrib(char *attrib, uint portno);
++typedef struct _ppb_config_regs {
++ unsigned short vendor;
++ unsigned short device;
++ unsigned short command;
++ unsigned short status;
++ unsigned char rev_id;
++ unsigned char prog_if;
++ unsigned char sub_class;
++ unsigned char base_class;
++ unsigned char cache_line_size;
++ unsigned char latency_timer;
++ unsigned char header_type;
++ unsigned char bist;
++ unsigned long rsvd_a[PPB_RSVDA_MAX];
++ unsigned char prim_bus;
++ unsigned char sec_bus;
++ unsigned char sub_bus;
++ unsigned char sec_lat;
++ unsigned char io_base;
++ unsigned char io_lim;
++ unsigned short sec_status;
++ unsigned short mem_base;
++ unsigned short mem_lim;
++ unsigned short pf_mem_base;
++ unsigned short pf_mem_lim;
++ unsigned long pf_mem_base_hi;
++ unsigned long pf_mem_lim_hi;
++ unsigned short io_base_hi;
++ unsigned short io_lim_hi;
++ unsigned short subsys_vendor;
++ unsigned short subsys_id;
++ unsigned long rsvd_b;
++ unsigned char rsvd_c;
++ unsigned char int_pin;
++ unsigned short bridge_ctrl;
++ unsigned char chip_ctrl;
++ unsigned char diag_ctrl;
++ unsigned short arb_ctrl;
++ unsigned long rsvd_d[PPB_RSVDD_MAX];
++ unsigned char dev_dep[192];
++} ppb_config_regs;
+
-+extern void
-+nvUnsetPortAttrib(char *attrib, uint portno);
++/* Eveything below is BRCM HND proprietary */
+
-+extern void
-+nvUnsetAllForcePortAttrib(uint portno);
++#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */
++#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */
++#define PCI_SPROM_CONTROL 0x88 /* sprom property control */
++#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */
++#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */
++#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */
++#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */
++#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */
++#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */
++#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */
++#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */
++#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */
+
-+extern PORT_ATTRIBS
-+nvGetSwitchPortAttribs(uint portno);
++#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */
++#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */
+
-+#endif /* _nvports_h_ */
++/* PCI_INT_MASK */
++#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */
++#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */
+
++/* PCI_SPROM_CONTROL */
++#define SPROM_BLANK 0x04 /* indicating a blank sprom */
++#define SPROM_WRITEEN 0x10 /* sprom write enable */
++#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */
+
++#define SPROM_SIZE 256 /* sprom size in 16-bit */
++#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */
+
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h 2005-08-28 11:12:20.441857480 +0200
-@@ -0,0 +1,38 @@
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h 2005-08-28 11:12:20.450856112 +0200
+@@ -0,0 +1,679 @@
+/*
-+ * OS Independent Layer
-+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef _osl_h_
-+#define _osl_h_
-+
-+#ifdef V2_HAL
-+#include <v2hal_osl.h>
-+#elif defined(linux)
-+#include <linux_osl.h>
-+#elif PMON
-+#include <pmon_osl.h>
-+#elif defined(NDIS)
-+#include <ndis_osl.h>
-+#elif defined(_CFE_)
-+#include <cfe_osl.h>
-+#elif defined(MACOS9)
-+#include <macos9_osl.h>
-+#elif defined(MACOSX)
-+#include <macosx_osl.h>
-+#else
-+#error "Unsupported OSL requested"
-+#endif
-+
-+/* handy */
-+#define SET_REG(r, mask, val) W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
-+
-+#endif /* _osl_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h 2005-08-28 11:12:20.442857328 +0200
-@@ -0,0 +1,362 @@
-+/*
-+ * pcicfg.h: PCI configuration constants and structures.
+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * Fundamental types and constants relating to 802.11
+ *
+ * $Id$
+ */
+
-+#ifndef _h_pci_
-+#define _h_pci_
++#ifndef _802_11_H_
++#define _802_11_H_
+
-+/* The following inside ifndef's so we don't collide with NTDDK.H */
-+#ifndef PCI_MAX_BUS
-+#define PCI_MAX_BUS 0x100
-+#endif
-+#ifndef PCI_MAX_DEVICES
-+#define PCI_MAX_DEVICES 0x20
-+#endif
-+#ifndef PCI_MAX_FUNCTION
-+#define PCI_MAX_FUNCTION 0x8
++#ifndef _TYPEDEFS_H_
++#include <typedefs.h>
+#endif
+
-+#ifndef PCI_INVALID_VENDORID
-+#define PCI_INVALID_VENDORID 0xffff
++#ifndef _NET_ETHERNET_H_
++#include <proto/ethernet.h>
+#endif
-+#ifndef PCI_INVALID_DEVICEID
-+#define PCI_INVALID_DEVICEID 0xffff
++
++/* enable structure packing */
++#if !defined(__GNUC__)
++#pragma pack(1)
+#endif
+
++/* some platforms require stronger medicine */
++#if defined(__GNUC__)
++#define PACKED __attribute__((packed))
++#else
++#define PACKED
++#endif
+
-+/* Convert between bus-slot-function-register and config addresses */
+
-+#define PCICFG_BUS_SHIFT 16 /* Bus shift */
-+#define PCICFG_SLOT_SHIFT 11 /* Slot shift */
-+#define PCICFG_FUN_SHIFT 8 /* Function shift */
-+#define PCICFG_OFF_SHIFT 0 /* Bus shift */
++#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */
+
-+#define PCICFG_BUS_MASK 0xff /* Bus mask */
-+#define PCICFG_SLOT_MASK 0x1f /* Slot mask */
-+#define PCICFG_FUN_MASK 7 /* Function mask */
-+#define PCICFG_OFF_MASK 0xff /* Bus mask */
++/* Generic 802.11 frame constants */
++#define DOT11_A3_HDR_LEN 24
++#define DOT11_A4_HDR_LEN 30
++#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN
++#define DOT11_FCS_LEN 4
++#define DOT11_ICV_LEN 4
++#define DOT11_ICV_AES_LEN 8
+
-+#define PCI_CONFIG_ADDR(b, s, f, o) \
-+ ((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT) \
-+ | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT) \
-+ | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT) \
-+ | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
+
-+#define PCI_CONFIG_BUS(a) (((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
-+#define PCI_CONFIG_SLOT(a) (((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
-+#define PCI_CONFIG_FUN(a) (((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
-+#define PCI_CONFIG_OFF(a) (((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
++#define DOT11_KEY_INDEX_SHIFT 6
++#define DOT11_IV_LEN 4
++#define DOT11_IV_TKIP_LEN 8
++#define DOT11_IV_AES_OCB_LEN 4
++#define DOT11_IV_AES_CCM_LEN 8
+
++#define DOT11_MAX_MPDU_BODY_LEN 2312
++#define DOT11_MAX_MPDU_LEN 2346 /* body len + A4 hdr + FCS */
++#define DOT11_MAX_SSID_LEN 32
+
-+/* The actual config space */
++/* dot11RTSThreshold */
++#define DOT11_DEFAULT_RTS_LEN 2347
++#define DOT11_MAX_RTS_LEN 2347
+
-+#define PCI_BAR_MAX 6
++/* dot11FragmentationThreshold */
++#define DOT11_MIN_FRAG_LEN 256
++#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */
++#define DOT11_DEFAULT_FRAG_LEN 2346
+
-+#define PCI_ROM_BAR 8
++/* dot11BeaconPeriod */
++#define DOT11_MIN_BEACON_PERIOD 1
++#define DOT11_MAX_BEACON_PERIOD 0xFFFF
+
-+#define PCR_RSVDA_MAX 2
++/* dot11DTIMPeriod */
++#define DOT11_MIN_DTIM_PERIOD 1
++#define DOT11_MAX_DTIM_PERIOD 0xFF
+
-+typedef struct _pci_config_regs {
-+ unsigned short vendor;
-+ unsigned short device;
-+ unsigned short command;
-+ unsigned short status;
-+ unsigned char rev_id;
-+ unsigned char prog_if;
-+ unsigned char sub_class;
-+ unsigned char base_class;
-+ unsigned char cache_line_size;
-+ unsigned char latency_timer;
-+ unsigned char header_type;
-+ unsigned char bist;
-+ unsigned long base[PCI_BAR_MAX];
-+ unsigned long cardbus_cis;
-+ unsigned short subsys_vendor;
-+ unsigned short subsys_id;
-+ unsigned long baserom;
-+ unsigned long rsvd_a[PCR_RSVDA_MAX];
-+ unsigned char int_line;
-+ unsigned char int_pin;
-+ unsigned char min_gnt;
-+ unsigned char max_lat;
-+ unsigned char dev_dep[192];
-+} pci_config_regs;
++/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
++#define DOT11_LLC_SNAP_HDR_LEN 8
++#define DOT11_OUI_LEN 3
++struct dot11_llc_snap_header {
++ uint8 dsap; /* always 0xAA */
++ uint8 ssap; /* always 0xAA */
++ uint8 ctl; /* always 0x03 */
++ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00
++ Bridge-Tunnel: 0x00 0x00 0xF8 */
++ uint16 type; /* ethertype */
++} PACKED;
+
-+#define SZPCR (sizeof (pci_config_regs))
-+#define MINSZPCR 64 /* offsetof (dev_dep[0] */
++/* RFC1042 header used by 802.11 per 802.1H */
++#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
+
-+/* A structure for the config registers is nice, but in most
-+ * systems the config space is not memory mapped, so we need
-+ * filed offsetts. :-(
++/* Generic 802.11 MAC header */
++/*
++ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
++ * The fields are defined such that the shorter 1, 2, and 3
++ * address headers just use the first k fields.
+ */
-+#define PCI_CFG_VID 0
-+#define PCI_CFG_DID 2
-+#define PCI_CFG_CMD 4
-+#define PCI_CFG_STAT 6
-+#define PCI_CFG_REV 8
-+#define PCI_CFG_PROGIF 9
-+#define PCI_CFG_SUBCL 0xa
-+#define PCI_CFG_BASECL 0xb
-+#define PCI_CFG_CLSZ 0xc
-+#define PCI_CFG_LATTIM 0xd
-+#define PCI_CFG_HDR 0xe
-+#define PCI_CFG_BIST 0xf
-+#define PCI_CFG_BAR0 0x10
-+#define PCI_CFG_BAR1 0x14
-+#define PCI_CFG_BAR2 0x18
-+#define PCI_CFG_BAR3 0x1c
-+#define PCI_CFG_BAR4 0x20
-+#define PCI_CFG_BAR5 0x24
-+#define PCI_CFG_CIS 0x28
-+#define PCI_CFG_SVID 0x2c
-+#define PCI_CFG_SSID 0x2e
-+#define PCI_CFG_ROMBAR 0x30
-+#define PCI_CFG_INT 0x3c
-+#define PCI_CFG_PIN 0x3d
-+#define PCI_CFG_MINGNT 0x3e
-+#define PCI_CFG_MAXLAT 0x3f
++struct dot11_header {
++ uint16 fc; /* frame control */
++ uint16 durid; /* duration/ID */
++ struct ether_addr a1; /* address 1 */
++ struct ether_addr a2; /* address 2 */
++ struct ether_addr a3; /* address 3 */
++ uint16 seq; /* sequence control */
++ struct ether_addr a4; /* address 4 */
++} PACKED;
+
-+/* Classes and subclasses */
++/* Control frames */
+
-+typedef enum {
-+ PCI_CLASS_OLD = 0,
-+ PCI_CLASS_DASDI,
-+ PCI_CLASS_NET,
-+ PCI_CLASS_DISPLAY,
-+ PCI_CLASS_MMEDIA,
-+ PCI_CLASS_MEMORY,
-+ PCI_CLASS_BRIDGE,
-+ PCI_CLASS_COMM,
-+ PCI_CLASS_BASE,
-+ PCI_CLASS_INPUT,
-+ PCI_CLASS_DOCK,
-+ PCI_CLASS_CPU,
-+ PCI_CLASS_SERIAL,
-+ PCI_CLASS_INTELLIGENT = 0xe,
-+ PCI_CLASS_SATELLITE,
-+ PCI_CLASS_CRYPT,
-+ PCI_CLASS_DSP,
-+ PCI_CLASS_MAX
-+} pci_classes;
++struct dot11_rts_frame {
++ uint16 fc; /* frame control */
++ uint16 durid; /* duration/ID */
++ struct ether_addr ra; /* receiver address */
++ struct ether_addr ta; /* transmitter address */
++} PACKED;
++#define DOT11_RTS_LEN 16
+
-+typedef enum {
-+ PCI_DASDI_SCSI,
-+ PCI_DASDI_IDE,
-+ PCI_DASDI_FLOPPY,
-+ PCI_DASDI_IPI,
-+ PCI_DASDI_RAID,
-+ PCI_DASDI_OTHER = 0x80
-+} pci_dasdi_subclasses;
++struct dot11_cts_frame {
++ uint16 fc; /* frame control */
++ uint16 durid; /* duration/ID */
++ struct ether_addr ra; /* receiver address */
++} PACKED;
++#define DOT11_CTS_LEN 10
+
-+typedef enum {
-+ PCI_NET_ETHER,
-+ PCI_NET_TOKEN,
-+ PCI_NET_FDDI,
-+ PCI_NET_ATM,
-+ PCI_NET_OTHER = 0x80
-+} pci_net_subclasses;
++struct dot11_ack_frame {
++ uint16 fc; /* frame control */
++ uint16 durid; /* duration/ID */
++ struct ether_addr ra; /* receiver address */
++} PACKED;
++#define DOT11_ACK_LEN 10
+
-+typedef enum {
-+ PCI_DISPLAY_VGA,
-+ PCI_DISPLAY_XGA,
-+ PCI_DISPLAY_3D,
-+ PCI_DISPLAY_OTHER = 0x80
-+} pci_display_subclasses;
++struct dot11_ps_poll_frame {
++ uint16 fc; /* frame control */
++ uint16 durid; /* AID */
++ struct ether_addr bssid; /* receiver address, STA in AP */
++ struct ether_addr ta; /* transmitter address */
++} PACKED;
++#define DOT11_PS_POLL_LEN 16
+
-+typedef enum {
-+ PCI_MMEDIA_VIDEO,
-+ PCI_MMEDIA_AUDIO,
-+ PCI_MMEDIA_PHONE,
-+ PCI_MEDIA_OTHER = 0x80
-+} pci_mmedia_subclasses;
++struct dot11_cf_end_frame {
++ uint16 fc; /* frame control */
++ uint16 durid; /* duration/ID */
++ struct ether_addr ra; /* receiver address */
++ struct ether_addr bssid; /* transmitter address, STA in AP */
++} PACKED;
++#define DOT11_CS_END_LEN 16
+
-+typedef enum {
-+ PCI_MEMORY_RAM,
-+ PCI_MEMORY_FLASH,
-+ PCI_MEMORY_OTHER = 0x80
-+} pci_memory_subclasses;
++/* Management frame header */
++struct dot11_management_header {
++ uint16 fc; /* frame control */
++ uint16 durid; /* duration/ID */
++ struct ether_addr da; /* receiver address */
++ struct ether_addr sa; /* transmitter address */
++ struct ether_addr bssid; /* BSS ID */
++ uint16 seq; /* sequence control */
++} PACKED;
++#define DOT11_MGMT_HDR_LEN 24
+
-+typedef enum {
-+ PCI_BRIDGE_HOST,
-+ PCI_BRIDGE_ISA,
-+ PCI_BRIDGE_EISA,
-+ PCI_BRIDGE_MC,
-+ PCI_BRIDGE_PCI,
-+ PCI_BRIDGE_PCMCIA,
-+ PCI_BRIDGE_NUBUS,
-+ PCI_BRIDGE_CARDBUS,
-+ PCI_BRIDGE_RACEWAY,
-+ PCI_BRIDGE_OTHER = 0x80
-+} pci_bridge_subclasses;
++/* Management frame payloads */
+
-+typedef enum {
-+ PCI_COMM_UART,
-+ PCI_COMM_PARALLEL,
-+ PCI_COMM_MULTIUART,
-+ PCI_COMM_MODEM,
-+ PCI_COMM_OTHER = 0x80
-+} pci_comm_subclasses;
++struct dot11_bcn_prb {
++ uint32 timestamp[2];
++ uint16 beacon_interval;
++ uint16 capability;
++} PACKED;
++#define DOT11_BCN_PRB_LEN 12
+
-+typedef enum {
-+ PCI_BASE_PIC,
-+ PCI_BASE_DMA,
-+ PCI_BASE_TIMER,
-+ PCI_BASE_RTC,
-+ PCI_BASE_PCI_HOTPLUG,
-+ PCI_BASE_OTHER = 0x80
-+} pci_base_subclasses;
++struct dot11_auth {
++ uint16 alg; /* algorithm */
++ uint16 seq; /* sequence control */
++ uint16 status; /* status code */
++} PACKED;
++#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */
+
-+typedef enum {
-+ PCI_INPUT_KBD,
-+ PCI_INPUT_PEN,
-+ PCI_INPUT_MOUSE,
-+ PCI_INPUT_SCANNER,
-+ PCI_INPUT_GAMEPORT,
-+ PCI_INPUT_OTHER = 0x80
-+} pci_input_subclasses;
++struct dot11_assoc_req {
++ uint16 capability; /* capability information */
++ uint16 listen; /* listen interval */
++} PACKED;
+
-+typedef enum {
-+ PCI_DOCK_GENERIC,
-+ PCI_DOCK_OTHER = 0x80
-+} pci_dock_subclasses;
++struct dot11_assoc_resp {
++ uint16 capability; /* capability information */
++ uint16 status; /* status code */
++ uint16 aid; /* association ID */
++} PACKED;
+
-+typedef enum {
-+ PCI_CPU_386,
-+ PCI_CPU_486,
-+ PCI_CPU_PENTIUM,
-+ PCI_CPU_ALPHA = 0x10,
-+ PCI_CPU_POWERPC = 0x20,
-+ PCI_CPU_MIPS = 0x30,
-+ PCI_CPU_COPROC = 0x40,
-+ PCI_CPU_OTHER = 0x80
-+} pci_cpu_subclasses;
++struct dot11_action_measure {
++ uint8 category;
++ uint8 action;
++ uint8 token;
++ uint8 data[1];
++} PACKED;
++#define DOT11_ACTION_MEASURE_LEN 3
+
-+typedef enum {
-+ PCI_SERIAL_IEEE1394,
-+ PCI_SERIAL_ACCESS,
-+ PCI_SERIAL_SSA,
-+ PCI_SERIAL_USB,
-+ PCI_SERIAL_FIBER,
-+ PCI_SERIAL_SMBUS,
-+ PCI_SERIAL_OTHER = 0x80
-+} pci_serial_subclasses;
++/**************
++ 802.11h related definitions.
++**************/
++typedef struct {
++ uint8 id;
++ uint8 len;
++ uint8 power;
++} dot11_power_cnst_t;
+
-+typedef enum {
-+ PCI_INTELLIGENT_I2O,
-+} pci_intelligent_subclasses;
++typedef struct {
++ uint8 min;
++ uint8 max;
++} dot11_power_cap_t;
+
-+typedef enum {
-+ PCI_SATELLITE_TV,
-+ PCI_SATELLITE_AUDIO,
-+ PCI_SATELLITE_VOICE,
-+ PCI_SATELLITE_DATA,
-+ PCI_SATELLITE_OTHER = 0x80
-+} pci_satellite_subclasses;
++typedef struct {
++ uint8 id;
++ uint8 len;
++ uint8 tx_pwr;
++ uint8 margin;
++} dot11_tpc_rep_t;
++#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */
+
-+typedef enum {
-+ PCI_CRYPT_NETWORK,
-+ PCI_CRYPT_ENTERTAINMENT,
-+ PCI_CRYPT_OTHER = 0x80
-+} pci_crypt_subclasses;
++typedef struct {
++ uint8 id;
++ uint8 len;
++ uint8 first_channel;
++ uint8 num_channels;
++} dot11_supp_channels_t;
+
-+typedef enum {
-+ PCI_DSP_DPIO,
-+ PCI_DSP_OTHER = 0x80
-+} pci_dsp_subclasses;
++struct dot11_channel_switch {
++ uint8 id;
++ uint8 len;
++ uint8 mode;
++ uint8 channel;
++ uint8 count;
++} PACKED;
++typedef struct dot11_channel_switch dot11_channel_switch_t;
+
-+/* Header types */
-+typedef enum {
-+ PCI_HEADER_NORMAL,
-+ PCI_HEADER_BRIDGE,
-+ PCI_HEADER_CARDBUS
-+} pci_header_types;
++/* 802.11h Measurement Request/Report IEs */
++/* Measurement Type field */
++#define DOT11_MEASURE_TYPE_BASIC 0
++#define DOT11_MEASURE_TYPE_CCA 1
++#define DOT11_MEASURE_TYPE_RPI 2
+
++/* Measurement Mode field */
+
-+/* Overlay for a PCI-to-PCI bridge */
++/* Measurement Request Modes */
++#define DOT11_MEASURE_MODE_ENABLE (1<<1)
++#define DOT11_MEASURE_MODE_REQUEST (1<<2)
++#define DOT11_MEASURE_MODE_REPORT (1<<3)
++/* Measurement Report Modes */
++#define DOT11_MEASURE_MODE_LATE (1<<0)
++#define DOT11_MEASURE_MODE_INCAPABLE (1<<1)
++#define DOT11_MEASURE_MODE_REFUSED (1<<2)
++/* Basic Measurement Map bits */
++#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0))
++#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1))
++#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2))
++#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3))
++#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4))
+
-+#define PPB_RSVDA_MAX 2
-+#define PPB_RSVDD_MAX 8
++typedef struct {
++ uint8 id;
++ uint8 len;
++ uint8 token;
++ uint8 mode;
++ uint8 type;
++ uint8 channel;
++ uint8 start_time[8];
++ uint16 duration;
++} dot11_meas_req_t;
++#define DOT11_MNG_IE_MREQ_LEN 14
++/* length of Measure Request IE data not including variable len */
++#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
+
-+typedef struct _ppb_config_regs {
-+ unsigned short vendor;
-+ unsigned short device;
-+ unsigned short command;
-+ unsigned short status;
-+ unsigned char rev_id;
-+ unsigned char prog_if;
-+ unsigned char sub_class;
-+ unsigned char base_class;
-+ unsigned char cache_line_size;
-+ unsigned char latency_timer;
-+ unsigned char header_type;
-+ unsigned char bist;
-+ unsigned long rsvd_a[PPB_RSVDA_MAX];
-+ unsigned char prim_bus;
-+ unsigned char sec_bus;
-+ unsigned char sub_bus;
-+ unsigned char sec_lat;
-+ unsigned char io_base;
-+ unsigned char io_lim;
-+ unsigned short sec_status;
-+ unsigned short mem_base;
-+ unsigned short mem_lim;
-+ unsigned short pf_mem_base;
-+ unsigned short pf_mem_lim;
-+ unsigned long pf_mem_base_hi;
-+ unsigned long pf_mem_lim_hi;
-+ unsigned short io_base_hi;
-+ unsigned short io_lim_hi;
-+ unsigned short subsys_vendor;
-+ unsigned short subsys_id;
-+ unsigned long rsvd_b;
-+ unsigned char rsvd_c;
-+ unsigned char int_pin;
-+ unsigned short bridge_ctrl;
-+ unsigned char chip_ctrl;
-+ unsigned char diag_ctrl;
-+ unsigned short arb_ctrl;
-+ unsigned long rsvd_d[PPB_RSVDD_MAX];
-+ unsigned char dev_dep[192];
-+} ppb_config_regs;
++struct dot11_meas_rep {
++ uint8 id;
++ uint8 len;
++ uint8 token;
++ uint8 mode;
++ uint8 type;
++ union
++ {
++ struct {
++ uint8 channel;
++ uint8 start_time[8];
++ uint16 duration;
++ uint8 map;
++ } PACKED basic;
++ uint8 data[1];
++ } PACKED rep;
++} PACKED;
++typedef struct dot11_meas_rep dot11_meas_rep_t;
+
-+/* Eveything below is BRCM HND proprietary */
++/* length of Measure Report IE data not including variable len */
++#define DOT11_MNG_IE_MREP_FIXED_LEN 3
+
-+#define PCI_BAR0_WIN 0x80 /* backplane addres space accessed by BAR0 */
-+#define PCI_BAR1_WIN 0x84 /* backplane addres space accessed by BAR1 */
-+#define PCI_SPROM_CONTROL 0x88 /* sprom property control */
-+#define PCI_BAR1_CONTROL 0x8c /* BAR1 region burst control */
-+#define PCI_INT_STATUS 0x90 /* PCI and other cores interrupts */
-+#define PCI_INT_MASK 0x94 /* mask of PCI and other cores interrupts */
-+#define PCI_TO_SB_MB 0x98 /* signal backplane interrupts */
-+#define PCI_BACKPLANE_ADDR 0xA0 /* address an arbitrary location on the system backplane */
-+#define PCI_BACKPLANE_DATA 0xA4 /* data at the location specified by above address register */
-+#define PCI_GPIO_IN 0xb0 /* pci config space gpio input (>=rev3) */
-+#define PCI_GPIO_OUT 0xb4 /* pci config space gpio output (>=rev3) */
-+#define PCI_GPIO_OUTEN 0xb8 /* pci config space gpio output enable (>=rev3) */
++struct dot11_meas_rep_basic {
++ uint8 channel;
++ uint8 start_time[8];
++ uint16 duration;
++ uint8 map;
++} PACKED;
++typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
++#define DOT11_MEASURE_BASIC_REP_LEN 12
+
-+#define PCI_BAR0_SPROM_OFFSET (4 * 1024) /* bar0 + 4K accesses external sprom */
-+#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024) /* bar0 + 6K accesses pci core registers */
++struct dot11_quiet {
++ uint8 id;
++ uint8 len;
++ uint8 count; /* TBTTs until beacon interval in quiet starts */
++ uint8 period; /* Beacon intervals between periodic quiet periods ? */
++ uint16 duration;/* Length of quiet period, in TU's */
++ uint16 offset; /* TU's offset from TBTT in Count field */
++} PACKED;
++typedef struct dot11_quiet dot11_quiet_t;
+
-+/* PCI_INT_MASK */
-+#define PCI_SBIM_SHIFT 8 /* backplane core interrupt mask bits offset */
-+#define PCI_SBIM_MASK 0xff00 /* backplane core interrupt mask */
++typedef struct {
++ uint8 channel;
++ uint8 map;
++} chan_map_tuple_t;
+
-+/* PCI_SPROM_CONTROL */
-+#define SPROM_BLANK 0x04 /* indicating a blank sprom */
-+#define SPROM_WRITEEN 0x10 /* sprom write enable */
-+#define SPROM_BOOTROM_WE 0x20 /* external bootrom write enable */
++typedef struct {
++ uint8 id;
++ uint8 len;
++ uint8 eaddr[ETHER_ADDR_LEN];
++ uint8 interval;
++ chan_map_tuple_t map[1];
++} dot11_ibss_dfs_t;
+
-+#define SPROM_SIZE 256 /* sprom size in 16-bit */
-+#define SPROM_CRC_RANGE 64 /* crc cover range in 16-bit */
+
-+#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h 2005-08-28 11:12:20.450856112 +0200
-@@ -0,0 +1,679 @@
-+/*
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * Fundamental types and constants relating to 802.11
-+ *
-+ * $Id$
++/* Macro to take a pointer to a beacon or probe response
++ * header and return the char* pointer to the SSID info element
+ */
++#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
+
-+#ifndef _802_11_H_
-+#define _802_11_H_
-+
-+#ifndef _TYPEDEFS_H_
-+#include <typedefs.h>
-+#endif
-+
-+#ifndef _NET_ETHERNET_H_
-+#include <proto/ethernet.h>
-+#endif
-+
-+/* enable structure packing */
-+#if !defined(__GNUC__)
-+#pragma pack(1)
-+#endif
-+
-+/* some platforms require stronger medicine */
-+#if defined(__GNUC__)
-+#define PACKED __attribute__((packed))
-+#else
-+#define PACKED
-+#endif
++/* Authentication frame payload constants */
++#define DOT11_OPEN_SYSTEM 0
++#define DOT11_SHARED_KEY 1
++#define DOT11_CHALLENGE_LEN 128
+
++/* Frame control macros */
++#define FC_PVER_MASK 0x3
++#define FC_PVER_SHIFT 0
++#define FC_TYPE_MASK 0xC
++#define FC_TYPE_SHIFT 2
++#define FC_SUBTYPE_MASK 0xF0
++#define FC_SUBTYPE_SHIFT 4
++#define FC_TODS 0x100
++#define FC_TODS_SHIFT 8
++#define FC_FROMDS 0x200
++#define FC_FROMDS_SHIFT 9
++#define FC_MOREFRAG 0x400
++#define FC_MOREFRAG_SHIFT 10
++#define FC_RETRY 0x800
++#define FC_RETRY_SHIFT 11
++#define FC_PM 0x1000
++#define FC_PM_SHIFT 12
++#define FC_MOREDATA 0x2000
++#define FC_MOREDATA_SHIFT 13
++#define FC_WEP 0x4000
++#define FC_WEP_SHIFT 14
++#define FC_ORDER 0x8000
++#define FC_ORDER_SHIFT 15
+
-+#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */
++/* sequence control macros */
++#define SEQNUM_SHIFT 4
++#define FRAGNUM_MASK 0xF
+
-+/* Generic 802.11 frame constants */
-+#define DOT11_A3_HDR_LEN 24
-+#define DOT11_A4_HDR_LEN 30
-+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN
-+#define DOT11_FCS_LEN 4
-+#define DOT11_ICV_LEN 4
-+#define DOT11_ICV_AES_LEN 8
++/* Frame Control type/subtype defs */
+
++/* FC Types */
++#define FC_TYPE_MNG 0
++#define FC_TYPE_CTL 1
++#define FC_TYPE_DATA 2
+
-+#define DOT11_KEY_INDEX_SHIFT 6
-+#define DOT11_IV_LEN 4
-+#define DOT11_IV_TKIP_LEN 8
-+#define DOT11_IV_AES_OCB_LEN 4
-+#define DOT11_IV_AES_CCM_LEN 8
++/* Management Subtypes */
++#define FC_SUBTYPE_ASSOC_REQ 0
++#define FC_SUBTYPE_ASSOC_RESP 1
++#define FC_SUBTYPE_REASSOC_REQ 2
++#define FC_SUBTYPE_REASSOC_RESP 3
++#define FC_SUBTYPE_PROBE_REQ 4
++#define FC_SUBTYPE_PROBE_RESP 5
++#define FC_SUBTYPE_BEACON 8
++#define FC_SUBTYPE_ATIM 9
++#define FC_SUBTYPE_DISASSOC 10
++#define FC_SUBTYPE_AUTH 11
++#define FC_SUBTYPE_DEAUTH 12
++#define FC_SUBTYPE_ACTION 13
+
-+#define DOT11_MAX_MPDU_BODY_LEN 2312
-+#define DOT11_MAX_MPDU_LEN 2346 /* body len + A4 hdr + FCS */
-+#define DOT11_MAX_SSID_LEN 32
++/* Control Subtypes */
++#define FC_SUBTYPE_PS_POLL 10
++#define FC_SUBTYPE_RTS 11
++#define FC_SUBTYPE_CTS 12
++#define FC_SUBTYPE_ACK 13
++#define FC_SUBTYPE_CF_END 14
++#define FC_SUBTYPE_CF_END_ACK 15
+
-+/* dot11RTSThreshold */
-+#define DOT11_DEFAULT_RTS_LEN 2347
-+#define DOT11_MAX_RTS_LEN 2347
++/* Data Subtypes */
++#define FC_SUBTYPE_DATA 0
++#define FC_SUBTYPE_DATA_CF_ACK 1
++#define FC_SUBTYPE_DATA_CF_POLL 2
++#define FC_SUBTYPE_DATA_CF_ACK_POLL 3
++#define FC_SUBTYPE_NULL 4
++#define FC_SUBTYPE_CF_ACK 5
++#define FC_SUBTYPE_CF_POLL 6
++#define FC_SUBTYPE_CF_ACK_POLL 7
+
-+/* dot11FragmentationThreshold */
-+#define DOT11_MIN_FRAG_LEN 256
-+#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */
-+#define DOT11_DEFAULT_FRAG_LEN 2346
++/* type-subtype combos */
++#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK)
+
-+/* dot11BeaconPeriod */
-+#define DOT11_MIN_BEACON_PERIOD 1
-+#define DOT11_MAX_BEACON_PERIOD 0xFFFF
++#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
+
-+/* dot11DTIMPeriod */
-+#define DOT11_MIN_DTIM_PERIOD 1
-+#define DOT11_MAX_DTIM_PERIOD 0xFF
++#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
++#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
++#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
++#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
++#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
++#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
++#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
++#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
++#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
++#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
++#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
+
-+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
-+#define DOT11_LLC_SNAP_HDR_LEN 8
-+#define DOT11_OUI_LEN 3
-+struct dot11_llc_snap_header {
-+ uint8 dsap; /* always 0xAA */
-+ uint8 ssap; /* always 0xAA */
-+ uint8 ctl; /* always 0x03 */
-+ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00
-+ Bridge-Tunnel: 0x00 0x00 0xF8 */
-+ uint16 type; /* ethertype */
-+} PACKED;
++#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
++#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
++#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
++#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
++#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
++#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
+
-+/* RFC1042 header used by 802.11 per 802.1H */
-+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
++#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
++#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
++#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
+
-+/* Generic 802.11 MAC header */
-+/*
-+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
-+ * The fields are defined such that the shorter 1, 2, and 3
-+ * address headers just use the first k fields.
-+ */
-+struct dot11_header {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr a1; /* address 1 */
-+ struct ether_addr a2; /* address 2 */
-+ struct ether_addr a3; /* address 3 */
-+ uint16 seq; /* sequence control */
-+ struct ether_addr a4; /* address 4 */
-+} PACKED;
++/* Management Frames */
+
-+/* Control frames */
++/* Management Frame Constants */
+
-+struct dot11_rts_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+ struct ether_addr ta; /* transmitter address */
-+} PACKED;
-+#define DOT11_RTS_LEN 16
++/* Fixed fields */
++#define DOT11_MNG_AUTH_ALGO_LEN 2
++#define DOT11_MNG_AUTH_SEQ_LEN 2
++#define DOT11_MNG_BEACON_INT_LEN 2
++#define DOT11_MNG_CAP_LEN 2
++#define DOT11_MNG_AP_ADDR_LEN 6
++#define DOT11_MNG_LISTEN_INT_LEN 2
++#define DOT11_MNG_REASON_LEN 2
++#define DOT11_MNG_AID_LEN 2
++#define DOT11_MNG_STATUS_LEN 2
++#define DOT11_MNG_TIMESTAMP_LEN 8
+
-+struct dot11_cts_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+} PACKED;
-+#define DOT11_CTS_LEN 10
++/* DUR/ID field in assoc resp is 0xc000 | AID */
++#define DOT11_AID_MASK 0x3fff
+
-+struct dot11_ack_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+} PACKED;
-+#define DOT11_ACK_LEN 10
++/* Reason Codes */
++#define DOT11_RC_RESERVED 0
++#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */
++#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */
++#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is
++ leaving (or has left) IBSS or ESS */
++#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */
++#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle
++ all currently associated stations */
++#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from
++ nonauthenticated station */
++#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from
++ nonassociated station */
++#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is
++ leaving (or has left) BSS */
++#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is
++ not authenticated with responding station */
++#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */
+
-+struct dot11_ps_poll_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* AID */
-+ struct ether_addr bssid; /* receiver address, STA in AP */
-+ struct ether_addr ta; /* transmitter address */
-+} PACKED;
-+#define DOT11_PS_POLL_LEN 16
++/* Status Codes */
++#define DOT11_STATUS_SUCCESS 0 /* Successful */
++#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */
++#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities
++ in the Capability Information field */
++#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to
++ confirm that association exists */
++#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside
++ the scope of this standard */
++#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the
++ specified authentication algorithm */
++#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with
++ authentication transaction sequence number
++ out of expected sequence */
++#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */
++#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting
++ for next frame in sequence */
++#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to
++ handle additional associated stations */
++#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station
++ not supporting all of the data rates in the
++ BSSBasicRateSet parameter */
++#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station
++ not supporting the Short Preamble option */
++#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station
++ not supporting the PBCC Modulation option */
++#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station
++ not supporting the Channel Agility option */
++#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management
++ capability is required. */
++#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the
++ Power Cap element is unacceptable. */
++#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the
++ Supported Channel element is unacceptable */
++#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station
++ not supporting the Short Slot Time option */
++#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station
++ not supporting the ER-PBCC Modulation option */
++#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station
++ not supporting the DSS-OFDM option */
+
-+struct dot11_cf_end_frame {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr ra; /* receiver address */
-+ struct ether_addr bssid; /* transmitter address, STA in AP */
-+} PACKED;
-+#define DOT11_CS_END_LEN 16
++/* Info Elts, length of INFORMATION portion of Info Elts */
++#define DOT11_MNG_DS_PARAM_LEN 1
++#define DOT11_MNG_IBSS_PARAM_LEN 2
+
-+/* Management frame header */
-+struct dot11_management_header {
-+ uint16 fc; /* frame control */
-+ uint16 durid; /* duration/ID */
-+ struct ether_addr da; /* receiver address */
-+ struct ether_addr sa; /* transmitter address */
-+ struct ether_addr bssid; /* BSS ID */
-+ uint16 seq; /* sequence control */
-+} PACKED;
-+#define DOT11_MGMT_HDR_LEN 24
++/* TIM Info element has 3 bytes fixed info in INFORMATION field,
++ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
++#define DOT11_MNG_TIM_FIXED_LEN 3
++#define DOT11_MNG_TIM_DTIM_COUNT 0
++#define DOT11_MNG_TIM_DTIM_PERIOD 1
++#define DOT11_MNG_TIM_BITMAP_CTL 2
++#define DOT11_MNG_TIM_PVB 3
+
-+/* Management frame payloads */
++/* TLV defines */
++#define TLV_TAG_OFF 0
++#define TLV_LEN_OFF 1
++#define TLV_HDR_LEN 2
++#define TLV_BODY_OFF 2
+
-+struct dot11_bcn_prb {
-+ uint32 timestamp[2];
-+ uint16 beacon_interval;
-+ uint16 capability;
-+} PACKED;
-+#define DOT11_BCN_PRB_LEN 12
++/* Management Frame Information Element IDs */
++#define DOT11_MNG_SSID_ID 0
++#define DOT11_MNG_RATES_ID 1
++#define DOT11_MNG_FH_PARMS_ID 2
++#define DOT11_MNG_DS_PARMS_ID 3
++#define DOT11_MNG_CF_PARMS_ID 4
++#define DOT11_MNG_TIM_ID 5
++#define DOT11_MNG_IBSS_PARMS_ID 6
++#define DOT11_MNG_COUNTRY_ID 7
++#define DOT11_MNG_HOPPING_PARMS_ID 8
++#define DOT11_MNG_HOPPING_TABLE_ID 9
++#define DOT11_MNG_REQUEST_ID 10
++#define DOT11_MNG_CHALLENGE_ID 16
++#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */
++#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */
++#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */
++#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */
++#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */
++#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/
++#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */
++#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */
++#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */
++#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */
++#define DOT11_MNG_ERP_ID 42
++#define DOT11_MNG_NONERP_ID 47
++#define DOT11_MNG_EXT_RATES_ID 50
++#define DOT11_MNG_WPA_ID 221
++#define DOT11_MNG_PROPR_ID 221
+
-+struct dot11_auth {
-+ uint16 alg; /* algorithm */
-+ uint16 seq; /* sequence control */
-+ uint16 status; /* status code */
-+} PACKED;
-+#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */
++/* ERP info element bit values */
++#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */
++#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */
++#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */
++#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */
+
-+struct dot11_assoc_req {
-+ uint16 capability; /* capability information */
-+ uint16 listen; /* listen interval */
-+} PACKED;
++/* Capability Information Field */
++#define DOT11_CAP_ESS 0x0001
++#define DOT11_CAP_IBSS 0x0002
++#define DOT11_CAP_POLLABLE 0x0004
++#define DOT11_CAP_POLL_RQ 0x0008
++#define DOT11_CAP_PRIVACY 0x0010
++#define DOT11_CAP_SHORT 0x0020
++#define DOT11_CAP_PBCC 0x0040
++#define DOT11_CAP_AGILITY 0x0080
++#define DOT11_CAP_SPECTRUM 0x0100
++#define DOT11_CAP_SHORTSLOT 0x0400
++#define DOT11_CAP_CCK_OFDM 0x2000
+
-+struct dot11_assoc_resp {
-+ uint16 capability; /* capability information */
-+ uint16 status; /* status code */
-+ uint16 aid; /* association ID */
-+} PACKED;
++/* Action Frame Constants */
++#define DOT11_ACTION_CAT_ERR_MASK 0x10
++#define DOT11_ACTION_CAT_SPECT_MNG 0x00
+
-+struct dot11_action_measure {
-+ uint8 category;
-+ uint8 action;
-+ uint8 token;
-+ uint8 data[1];
-+} PACKED;
-+#define DOT11_ACTION_MEASURE_LEN 3
++#define DOT11_ACTION_ID_M_REQ 0
++#define DOT11_ACTION_ID_M_REP 1
++#define DOT11_ACTION_ID_TPC_REQ 2
++#define DOT11_ACTION_ID_TPC_REP 3
++#define DOT11_ACTION_ID_CHANNEL_SWITCH 4
+
-+/**************
-+ 802.11h related definitions.
-+**************/
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 power;
-+} dot11_power_cnst_t;
++/* MLME Enumerations */
++#define DOT11_BSSTYPE_INFRASTRUCTURE 0
++#define DOT11_BSSTYPE_INDEPENDENT 1
++#define DOT11_BSSTYPE_ANY 2
++#define DOT11_SCANTYPE_ACTIVE 0
++#define DOT11_SCANTYPE_PASSIVE 1
+
-+typedef struct {
-+ uint8 min;
-+ uint8 max;
-+} dot11_power_cap_t;
++/* 802.11 A PHY constants */
++#define APHY_SLOT_TIME 9
++#define APHY_SIFS_TIME 16
++#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
++#define APHY_PREAMBLE_TIME 16
++#define APHY_SIGNAL_TIME 4
++#define APHY_SYMBOL_TIME 4
++#define APHY_SERVICE_NBITS 16
++#define APHY_TAIL_NBITS 6
++#define APHY_CWMIN 15
+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 tx_pwr;
-+ uint8 margin;
-+} dot11_tpc_rep_t;
-+#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */
++/* 802.11 B PHY constants */
++#define BPHY_SLOT_TIME 20
++#define BPHY_SIFS_TIME 10
++#define BPHY_DIFS_TIME 50
++#define BPHY_PLCP_TIME 192
++#define BPHY_PLCP_SHORT_TIME 96
++#define BPHY_CWMIN 31
+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 first_channel;
-+ uint8 num_channels;
-+} dot11_supp_channels_t;
++/* 802.11 G constants */
++#define DOT11_OFDM_SIGNAL_EXTENSION 6
+
-+struct dot11_channel_switch {
-+ uint8 id;
-+ uint8 len;
-+ uint8 mode;
-+ uint8 channel;
-+ uint8 count;
-+} PACKED;
-+typedef struct dot11_channel_switch dot11_channel_switch_t;
++#define PHY_CWMAX 1023
+
-+/* 802.11h Measurement Request/Report IEs */
-+/* Measurement Type field */
-+#define DOT11_MEASURE_TYPE_BASIC 0
-+#define DOT11_MEASURE_TYPE_CCA 1
-+#define DOT11_MEASURE_TYPE_RPI 2
++#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */
+
-+/* Measurement Mode field */
++/* dot11Counters Table - 802.11 spec., Annex D */
++typedef struct d11cnt {
++ uint32 txfrag; /* dot11TransmittedFragmentCount */
++ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
++ uint32 txfail; /* dot11FailedCount */
++ uint32 txretry; /* dot11RetryCount */
++ uint32 txretrie; /* dot11MultipleRetryCount */
++ uint32 rxdup; /* dot11FrameduplicateCount */
++ uint32 txrts; /* dot11RTSSuccessCount */
++ uint32 txnocts; /* dot11RTSFailureCount */
++ uint32 txnoack; /* dot11ACKFailureCount */
++ uint32 rxfrag; /* dot11ReceivedFragmentCount */
++ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
++ uint32 rxcrc; /* dot11FCSErrorCount */
++ uint32 txfrmsnt; /* dot11TransmittedFrameCount */
++ uint32 rxundec; /* dot11WEPUndecryptableCount */
++} d11cnt_t;
+
-+/* Measurement Request Modes */
-+#define DOT11_MEASURE_MODE_ENABLE (1<<1)
-+#define DOT11_MEASURE_MODE_REQUEST (1<<2)
-+#define DOT11_MEASURE_MODE_REPORT (1<<3)
-+/* Measurement Report Modes */
-+#define DOT11_MEASURE_MODE_LATE (1<<0)
-+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1)
-+#define DOT11_MEASURE_MODE_REFUSED (1<<2)
-+/* Basic Measurement Map bits */
-+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0))
-+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1))
-+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2))
-+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3))
-+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4))
++/* BRCM OUI */
++#define BRCM_OUI "\x00\x10\x18"
+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 token;
-+ uint8 mode;
-+ uint8 type;
-+ uint8 channel;
-+ uint8 start_time[8];
-+ uint16 duration;
-+} dot11_meas_req_t;
-+#define DOT11_MNG_IE_MREQ_LEN 14
-+/* length of Measure Request IE data not including variable len */
-+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
++/* WPA definitions */
++#define WPA_VERSION 1
++#define WPA_OUI "\x00\x50\xF2"
+
-+struct dot11_meas_rep {
-+ uint8 id;
-+ uint8 len;
-+ uint8 token;
-+ uint8 mode;
-+ uint8 type;
-+ union
-+ {
-+ struct {
-+ uint8 channel;
-+ uint8 start_time[8];
-+ uint16 duration;
-+ uint8 map;
-+ } PACKED basic;
-+ uint8 data[1];
-+ } PACKED rep;
-+} PACKED;
-+typedef struct dot11_meas_rep dot11_meas_rep_t;
++#define WPA_OUI_LEN 3
+
-+/* length of Measure Report IE data not including variable len */
-+#define DOT11_MNG_IE_MREP_FIXED_LEN 3
++/* WPA authentication modes */
++#define WPA_AUTH_NONE 0 /* None */
++#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */
++#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */
++#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */
++
++#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \
++ (auth) == WPA_AUTH_UNSPECIFIED || \
++ (auth) == WPA_AUTH_PSK)
+
-+struct dot11_meas_rep_basic {
-+ uint8 channel;
-+ uint8 start_time[8];
-+ uint16 duration;
-+ uint8 map;
-+} PACKED;
-+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
-+#define DOT11_MEASURE_BASIC_REP_LEN 12
+
-+struct dot11_quiet {
-+ uint8 id;
-+ uint8 len;
-+ uint8 count; /* TBTTs until beacon interval in quiet starts */
-+ uint8 period; /* Beacon intervals between periodic quiet periods ? */
-+ uint16 duration;/* Length of quiet period, in TU's */
-+ uint16 offset; /* TU's offset from TBTT in Count field */
-+} PACKED;
-+typedef struct dot11_quiet dot11_quiet_t;
++/* Key related defines */
++#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */
++#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */
++#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
+
-+typedef struct {
-+ uint8 channel;
-+ uint8 map;
-+} chan_map_tuple_t;
++#define WEP1_KEY_SIZE 5 /* max size of any WEP key */
++#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
++#define WEP128_KEY_SIZE 13 /* max size of any WEP key */
++#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
++#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */
++#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
++#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
++#define TKIP_KEY_SIZE 32 /* size of any TKIP key */
++#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
++#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
++#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
++#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
++#define AES_KEY_SIZE 16 /* size of AES key */
+
-+typedef struct {
-+ uint8 id;
-+ uint8 len;
-+ uint8 eaddr[ETHER_ADDR_LEN];
-+ uint8 interval;
-+ chan_map_tuple_t map[1];
-+} dot11_ibss_dfs_t;
++#undef PACKED
++#if !defined(__GNUC__)
++#pragma pack()
++#endif
+
++#endif /* _802_11_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h 2005-08-28 11:12:20.450856112 +0200
+@@ -0,0 +1,145 @@
++/*******************************************************************************
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
++ ******************************************************************************/
+
-+/* Macro to take a pointer to a beacon or probe response
-+ * header and return the char* pointer to the SSID info element
-+ */
-+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
++#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */
++#define _NET_ETHERNET_H_
+
-+/* Authentication frame payload constants */
-+#define DOT11_OPEN_SYSTEM 0
-+#define DOT11_SHARED_KEY 1
-+#define DOT11_CHALLENGE_LEN 128
++#ifndef _TYPEDEFS_H_
++#include "typedefs.h"
++#endif
+
-+/* Frame control macros */
-+#define FC_PVER_MASK 0x3
-+#define FC_PVER_SHIFT 0
-+#define FC_TYPE_MASK 0xC
-+#define FC_TYPE_SHIFT 2
-+#define FC_SUBTYPE_MASK 0xF0
-+#define FC_SUBTYPE_SHIFT 4
-+#define FC_TODS 0x100
-+#define FC_TODS_SHIFT 8
-+#define FC_FROMDS 0x200
-+#define FC_FROMDS_SHIFT 9
-+#define FC_MOREFRAG 0x400
-+#define FC_MOREFRAG_SHIFT 10
-+#define FC_RETRY 0x800
-+#define FC_RETRY_SHIFT 11
-+#define FC_PM 0x1000
-+#define FC_PM_SHIFT 12
-+#define FC_MOREDATA 0x2000
-+#define FC_MOREDATA_SHIFT 13
-+#define FC_WEP 0x4000
-+#define FC_WEP_SHIFT 14
-+#define FC_ORDER 0x8000
-+#define FC_ORDER_SHIFT 15
++#if defined(__GNUC__)
++#define PACKED __attribute__((packed))
++#else
++#define PACKED
++#endif
+
-+/* sequence control macros */
-+#define SEQNUM_SHIFT 4
-+#define FRAGNUM_MASK 0xF
++/*
++ * The number of bytes in an ethernet (MAC) address.
++ */
++#define ETHER_ADDR_LEN 6
+
-+/* Frame Control type/subtype defs */
++/*
++ * The number of bytes in the type field.
++ */
++#define ETHER_TYPE_LEN 2
+
-+/* FC Types */
-+#define FC_TYPE_MNG 0
-+#define FC_TYPE_CTL 1
-+#define FC_TYPE_DATA 2
++/*
++ * The number of bytes in the trailing CRC field.
++ */
++#define ETHER_CRC_LEN 4
+
-+/* Management Subtypes */
-+#define FC_SUBTYPE_ASSOC_REQ 0
-+#define FC_SUBTYPE_ASSOC_RESP 1
-+#define FC_SUBTYPE_REASSOC_REQ 2
-+#define FC_SUBTYPE_REASSOC_RESP 3
-+#define FC_SUBTYPE_PROBE_REQ 4
-+#define FC_SUBTYPE_PROBE_RESP 5
-+#define FC_SUBTYPE_BEACON 8
-+#define FC_SUBTYPE_ATIM 9
-+#define FC_SUBTYPE_DISASSOC 10
-+#define FC_SUBTYPE_AUTH 11
-+#define FC_SUBTYPE_DEAUTH 12
-+#define FC_SUBTYPE_ACTION 13
++/*
++ * The length of the combined header.
++ */
++#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
+
-+/* Control Subtypes */
-+#define FC_SUBTYPE_PS_POLL 10
-+#define FC_SUBTYPE_RTS 11
-+#define FC_SUBTYPE_CTS 12
-+#define FC_SUBTYPE_ACK 13
-+#define FC_SUBTYPE_CF_END 14
-+#define FC_SUBTYPE_CF_END_ACK 15
++/*
++ * The minimum packet length.
++ */
++#define ETHER_MIN_LEN 64
+
-+/* Data Subtypes */
-+#define FC_SUBTYPE_DATA 0
-+#define FC_SUBTYPE_DATA_CF_ACK 1
-+#define FC_SUBTYPE_DATA_CF_POLL 2
-+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3
-+#define FC_SUBTYPE_NULL 4
-+#define FC_SUBTYPE_CF_ACK 5
-+#define FC_SUBTYPE_CF_POLL 6
-+#define FC_SUBTYPE_CF_ACK_POLL 7
++/*
++ * The minimum packet user data length.
++ */
++#define ETHER_MIN_DATA 46
+
-+/* type-subtype combos */
-+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK)
++/*
++ * The maximum packet length.
++ */
++#define ETHER_MAX_LEN 1518
+
-+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
++/*
++ * The maximum packet user data length.
++ */
++#define ETHER_MAX_DATA 1500
+
-+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
-+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
-+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
-+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
-+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
-+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
-+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
-+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
-+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
-+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
-+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
++/*
++ * Used to uniquely identify a 802.1q VLAN-tagged header.
++ */
++#define VLAN_TAG 0x8100
+
-+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
-+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
-+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
-+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
-+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
-+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
++/*
++ * Located after dest & src address in ether header.
++ */
++#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2)
+
-+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
-+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
-+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
++/*
++ * 4 bytes of vlan field info.
++ */
++#define VLAN_FIELDS_SIZE 4
+
-+/* Management Frames */
++/* location of pri bits in 16-bit vlan fields */
++#define VLAN_PRI_SHIFT 13
+
-+/* Management Frame Constants */
++/* 3 bits of priority */
++#define VLAN_PRI_MASK 7
+
-+/* Fixed fields */
-+#define DOT11_MNG_AUTH_ALGO_LEN 2
-+#define DOT11_MNG_AUTH_SEQ_LEN 2
-+#define DOT11_MNG_BEACON_INT_LEN 2
-+#define DOT11_MNG_CAP_LEN 2
-+#define DOT11_MNG_AP_ADDR_LEN 6
-+#define DOT11_MNG_LISTEN_INT_LEN 2
-+#define DOT11_MNG_REASON_LEN 2
-+#define DOT11_MNG_AID_LEN 2
-+#define DOT11_MNG_STATUS_LEN 2
-+#define DOT11_MNG_TIMESTAMP_LEN 8
++/* 802.1X ethertype */
++#define ETHER_TYPE_802_1X 0x888e
+
-+/* DUR/ID field in assoc resp is 0xc000 | AID */
-+#define DOT11_AID_MASK 0x3fff
++/*
++ * A macro to validate a length with
++ */
++#define ETHER_IS_VALID_LEN(foo) \
++ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
-+/* Reason Codes */
-+#define DOT11_RC_RESERVED 0
-+#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */
-+#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */
-+#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is
-+ leaving (or has left) IBSS or ESS */
-+#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */
-+#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle
-+ all currently associated stations */
-+#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from
-+ nonauthenticated station */
-+#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from
-+ nonassociated station */
-+#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is
-+ leaving (or has left) BSS */
-+#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is
-+ not authenticated with responding station */
-+#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */
+
-+/* Status Codes */
-+#define DOT11_STATUS_SUCCESS 0 /* Successful */
-+#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */
-+#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities
-+ in the Capability Information field */
-+#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to
-+ confirm that association exists */
-+#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside
-+ the scope of this standard */
-+#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the
-+ specified authentication algorithm */
-+#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with
-+ authentication transaction sequence number
-+ out of expected sequence */
-+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */
-+#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting
-+ for next frame in sequence */
-+#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to
-+ handle additional associated stations */
-+#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station
-+ not supporting all of the data rates in the
-+ BSSBasicRateSet parameter */
-+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station
-+ not supporting the Short Preamble option */
-+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station
-+ not supporting the PBCC Modulation option */
-+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station
-+ not supporting the Channel Agility option */
-+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management
-+ capability is required. */
-+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the
-+ Power Cap element is unacceptable. */
-+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the
-+ Supported Channel element is unacceptable */
-+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station
-+ not supporting the Short Slot Time option */
-+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station
-+ not supporting the ER-PBCC Modulation option */
-+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station
-+ not supporting the DSS-OFDM option */
-+
-+/* Info Elts, length of INFORMATION portion of Info Elts */
-+#define DOT11_MNG_DS_PARAM_LEN 1
-+#define DOT11_MNG_IBSS_PARAM_LEN 2
-+
-+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
-+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
-+#define DOT11_MNG_TIM_FIXED_LEN 3
-+#define DOT11_MNG_TIM_DTIM_COUNT 0
-+#define DOT11_MNG_TIM_DTIM_PERIOD 1
-+#define DOT11_MNG_TIM_BITMAP_CTL 2
-+#define DOT11_MNG_TIM_PVB 3
-+
-+/* TLV defines */
-+#define TLV_TAG_OFF 0
-+#define TLV_LEN_OFF 1
-+#define TLV_HDR_LEN 2
-+#define TLV_BODY_OFF 2
-+
-+/* Management Frame Information Element IDs */
-+#define DOT11_MNG_SSID_ID 0
-+#define DOT11_MNG_RATES_ID 1
-+#define DOT11_MNG_FH_PARMS_ID 2
-+#define DOT11_MNG_DS_PARMS_ID 3
-+#define DOT11_MNG_CF_PARMS_ID 4
-+#define DOT11_MNG_TIM_ID 5
-+#define DOT11_MNG_IBSS_PARMS_ID 6
-+#define DOT11_MNG_COUNTRY_ID 7
-+#define DOT11_MNG_HOPPING_PARMS_ID 8
-+#define DOT11_MNG_HOPPING_TABLE_ID 9
-+#define DOT11_MNG_REQUEST_ID 10
-+#define DOT11_MNG_CHALLENGE_ID 16
-+#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */
-+#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */
-+#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */
-+#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */
-+#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */
-+#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/
-+#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */
-+#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */
-+#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */
-+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */
-+#define DOT11_MNG_ERP_ID 42
-+#define DOT11_MNG_NONERP_ID 47
-+#define DOT11_MNG_EXT_RATES_ID 50
-+#define DOT11_MNG_WPA_ID 221
-+#define DOT11_MNG_PROPR_ID 221
-+
-+/* ERP info element bit values */
-+#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */
-+#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */
-+#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */
-+#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */
-+
-+/* Capability Information Field */
-+#define DOT11_CAP_ESS 0x0001
-+#define DOT11_CAP_IBSS 0x0002
-+#define DOT11_CAP_POLLABLE 0x0004
-+#define DOT11_CAP_POLL_RQ 0x0008
-+#define DOT11_CAP_PRIVACY 0x0010
-+#define DOT11_CAP_SHORT 0x0020
-+#define DOT11_CAP_PBCC 0x0040
-+#define DOT11_CAP_AGILITY 0x0080
-+#define DOT11_CAP_SPECTRUM 0x0100
-+#define DOT11_CAP_SHORTSLOT 0x0400
-+#define DOT11_CAP_CCK_OFDM 0x2000
-+
-+/* Action Frame Constants */
-+#define DOT11_ACTION_CAT_ERR_MASK 0x10
-+#define DOT11_ACTION_CAT_SPECT_MNG 0x00
-+
-+#define DOT11_ACTION_ID_M_REQ 0
-+#define DOT11_ACTION_ID_M_REP 1
-+#define DOT11_ACTION_ID_TPC_REQ 2
-+#define DOT11_ACTION_ID_TPC_REP 3
-+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4
-+
-+/* MLME Enumerations */
-+#define DOT11_BSSTYPE_INFRASTRUCTURE 0
-+#define DOT11_BSSTYPE_INDEPENDENT 1
-+#define DOT11_BSSTYPE_ANY 2
-+#define DOT11_SCANTYPE_ACTIVE 0
-+#define DOT11_SCANTYPE_PASSIVE 1
-+
-+/* 802.11 A PHY constants */
-+#define APHY_SLOT_TIME 9
-+#define APHY_SIFS_TIME 16
-+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
-+#define APHY_PREAMBLE_TIME 16
-+#define APHY_SIGNAL_TIME 4
-+#define APHY_SYMBOL_TIME 4
-+#define APHY_SERVICE_NBITS 16
-+#define APHY_TAIL_NBITS 6
-+#define APHY_CWMIN 15
-+
-+/* 802.11 B PHY constants */
-+#define BPHY_SLOT_TIME 20
-+#define BPHY_SIFS_TIME 10
-+#define BPHY_DIFS_TIME 50
-+#define BPHY_PLCP_TIME 192
-+#define BPHY_PLCP_SHORT_TIME 96
-+#define BPHY_CWMIN 31
-+
-+/* 802.11 G constants */
-+#define DOT11_OFDM_SIGNAL_EXTENSION 6
-+
-+#define PHY_CWMAX 1023
-+
-+#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */
-+
-+/* dot11Counters Table - 802.11 spec., Annex D */
-+typedef struct d11cnt {
-+ uint32 txfrag; /* dot11TransmittedFragmentCount */
-+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
-+ uint32 txfail; /* dot11FailedCount */
-+ uint32 txretry; /* dot11RetryCount */
-+ uint32 txretrie; /* dot11MultipleRetryCount */
-+ uint32 rxdup; /* dot11FrameduplicateCount */
-+ uint32 txrts; /* dot11RTSSuccessCount */
-+ uint32 txnocts; /* dot11RTSFailureCount */
-+ uint32 txnoack; /* dot11ACKFailureCount */
-+ uint32 rxfrag; /* dot11ReceivedFragmentCount */
-+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
-+ uint32 rxcrc; /* dot11FCSErrorCount */
-+ uint32 txfrmsnt; /* dot11TransmittedFrameCount */
-+ uint32 rxundec; /* dot11WEPUndecryptableCount */
-+} d11cnt_t;
-+
-+/* BRCM OUI */
-+#define BRCM_OUI "\x00\x10\x18"
-+
-+/* WPA definitions */
-+#define WPA_VERSION 1
-+#define WPA_OUI "\x00\x50\xF2"
++#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */
++/*
++ * Structure of a 10Mb/s Ethernet header.
++ */
++struct ether_header {
++ uint8 ether_dhost[ETHER_ADDR_LEN];
++ uint8 ether_shost[ETHER_ADDR_LEN];
++ uint16 ether_type;
++} PACKED ;
+
-+#define WPA_OUI_LEN 3
++/*
++ * Structure of a 48-bit Ethernet address.
++ */
++struct ether_addr {
++ uint8 octet[ETHER_ADDR_LEN];
++} PACKED ;
++#endif
+
-+/* WPA authentication modes */
-+#define WPA_AUTH_NONE 0 /* None */
-+#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */
-+#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */
-+#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */
-+
-+#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \
-+ (auth) == WPA_AUTH_UNSPECIFIED || \
-+ (auth) == WPA_AUTH_PSK)
++/*
++ * Takes a pointer, returns true if a 48-bit multicast address
++ * (including broadcast, since it is all ones)
++ */
++#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
+
++/*
++ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
++ */
++#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \
++ ((uint8 *)(ea))[1] & \
++ ((uint8 *)(ea))[2] & \
++ ((uint8 *)(ea))[3] & \
++ ((uint8 *)(ea))[4] & \
++ ((uint8 *)(ea))[5]) == 0xff)
+
-+/* Key related defines */
-+#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */
-+#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */
-+#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
++static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+
-+#define WEP1_KEY_SIZE 5 /* max size of any WEP key */
-+#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
-+#define WEP128_KEY_SIZE 13 /* max size of any WEP key */
-+#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
-+#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */
-+#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
-+#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
-+#define TKIP_KEY_SIZE 32 /* size of any TKIP key */
-+#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
-+#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
-+#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
-+#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
-+#define AES_KEY_SIZE 16 /* size of AES key */
++/*
++ * Takes a pointer, returns true if a 48-bit null address (all zeros)
++ */
++#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \
++ ((uint8 *)(ea))[1] | \
++ ((uint8 *)(ea))[2] | \
++ ((uint8 *)(ea))[3] | \
++ ((uint8 *)(ea))[4] | \
++ ((uint8 *)(ea))[5]) == 0)
+
+#undef PACKED
-+#if !defined(__GNUC__)
-+#pragma pack()
-+#endif
+
-+#endif /* _802_11_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h 2005-08-28 11:12:20.450856112 +0200
-@@ -0,0 +1,145 @@
++#endif /* _NET_ETHERNET_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h 2005-08-28 11:12:20.451855960 +0200
+@@ -0,0 +1,69 @@
+/*******************************************************************************
+ * $Id$
+ * Copyright 2001-2003, Broadcom Corporation
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
++ * crc.h - a function to compute crc for iLine10 headers
+ ******************************************************************************/
+
-+#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */
-+#define _NET_ETHERNET_H_
++#ifndef _RTS_CRC_H_
++#define _RTS_CRC_H_ 1
+
-+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
-+#endif
+
-+#if defined(__GNUC__)
-+#define PACKED __attribute__((packed))
-+#else
-+#define PACKED
-+#endif
-+
-+/*
-+ * The number of bytes in an ethernet (MAC) address.
-+ */
-+#define ETHER_ADDR_LEN 6
-+
-+/*
-+ * The number of bytes in the type field.
-+ */
-+#define ETHER_TYPE_LEN 2
-+
-+/*
-+ * The number of bytes in the trailing CRC field.
-+ */
-+#define ETHER_CRC_LEN 4
-+
-+/*
-+ * The length of the combined header.
-+ */
-+#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
-+
-+/*
-+ * The minimum packet length.
-+ */
-+#define ETHER_MIN_LEN 64
-+
-+/*
-+ * The minimum packet user data length.
-+ */
-+#define ETHER_MIN_DATA 46
-+
-+/*
-+ * The maximum packet length.
-+ */
-+#define ETHER_MAX_LEN 1518
-+
-+/*
-+ * The maximum packet user data length.
-+ */
-+#define ETHER_MAX_DATA 1500
-+
-+/*
-+ * Used to uniquely identify a 802.1q VLAN-tagged header.
-+ */
-+#define VLAN_TAG 0x8100
-+
-+/*
-+ * Located after dest & src address in ether header.
-+ */
-+#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2)
-+
-+/*
-+ * 4 bytes of vlan field info.
-+ */
-+#define VLAN_FIELDS_SIZE 4
-+
-+/* location of pri bits in 16-bit vlan fields */
-+#define VLAN_PRI_SHIFT 13
-+
-+/* 3 bits of priority */
-+#define VLAN_PRI_MASK 7
-+
-+/* 802.1X ethertype */
-+#define ETHER_TYPE_802_1X 0x888e
-+
-+/*
-+ * A macro to validate a length with
-+ */
-+#define ETHER_IS_VALID_LEN(foo) \
-+ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
-+
-+
-+#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */
-+/*
-+ * Structure of a 10Mb/s Ethernet header.
-+ */
-+struct ether_header {
-+ uint8 ether_dhost[ETHER_ADDR_LEN];
-+ uint8 ether_shost[ETHER_ADDR_LEN];
-+ uint16 ether_type;
-+} PACKED ;
-+
-+/*
-+ * Structure of a 48-bit Ethernet address.
-+ */
-+struct ether_addr {
-+ uint8 octet[ETHER_ADDR_LEN];
-+} PACKED ;
-+#endif
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit multicast address
-+ * (including broadcast, since it is all ones)
-+ */
-+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
-+ */
-+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \
-+ ((uint8 *)(ea))[1] & \
-+ ((uint8 *)(ea))[2] & \
-+ ((uint8 *)(ea))[3] & \
-+ ((uint8 *)(ea))[4] & \
-+ ((uint8 *)(ea))[5]) == 0xff)
-+
-+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
-+ */
-+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \
-+ ((uint8 *)(ea))[1] | \
-+ ((uint8 *)(ea))[2] | \
-+ ((uint8 *)(ea))[3] | \
-+ ((uint8 *)(ea))[4] | \
-+ ((uint8 *)(ea))[5]) == 0)
-+
-+#undef PACKED
-+
-+#endif /* _NET_ETHERNET_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h 2005-08-28 11:12:20.451855960 +0200
-@@ -0,0 +1,69 @@
-+/*******************************************************************************
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * crc.h - a function to compute crc for iLine10 headers
-+ ******************************************************************************/
-+
-+#ifndef _RTS_CRC_H_
-+#define _RTS_CRC_H_ 1
-+
-+#include "typedefs.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
++#ifdef __cplusplus
++extern "C" {
+#endif
+
+
+#define CLK_DYNAMIC 2 /* enable dynamic power control */
+
+#endif /* _sbutils_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sflash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sflash.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sflash.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sflash.h 2005-08-28 11:12:20.473852616 +0200
-@@ -0,0 +1,46 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ *
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _sflash_h_
-+#define _sflash_h_
-+
-+#include <typedefs.h>
-+#include <sbchipc.h>
-+
-+/* GPIO based bank selection (1 GPIO bit) */
-+#define SFLASH_MAX_BANKS 1
-+#define SFLASH_GPIO_SHIFT 2
-+#define SFLASH_GPIO_MASK ((SFLASH_MAX_BANKS - 1) << SFLASH_GPIO_SHIFT)
-+
-+struct sflash_bank {
-+ uint offset; /* Byte offset */
-+ uint erasesize; /* Block size */
-+ uint numblocks; /* Number of blocks */
-+ uint size; /* Total bank size in bytes */
-+};
-+
-+struct sflash {
-+ struct sflash_bank banks[SFLASH_MAX_BANKS]; /* GPIO selectable banks */
-+ uint32 type; /* Type */
-+ uint size; /* Total array size in bytes */
-+};
-+
-+/* Utility functions */
-+extern int sflash_poll(chipcregs_t *cc, uint offset);
-+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf);
-+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
-+extern int sflash_erase(chipcregs_t *cc, uint offset);
-+extern struct sflash * sflash_init(chipcregs_t *cc);
-+
-+#endif /* _sflash_h_ */
diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h
--- linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h 2005-08-28 11:12:20.474852464 +0200
+}
diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/setup.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c
--- linux-2.6.12.5/arch/mips/bcm947xx/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c 2005-08-28 16:57:28.317825624 +0200
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c 2005-09-11 01:36:10.217667456 +0200
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
+static void bcm47xx_machine_restart(char *command)
+{
+ /* Set the watchdog timer to reset immediately */
-+ cli();
++ local_irq_disable();
+ sb_watchdog(sbh, 1);
+ while (1);
+}
+static void bcm47xx_machine_halt(void)
+{
+ /* Disable interrupts and watchdog and spin forever */
-+ cli();
++ local_irq_disable();
+ sb_watchdog(sbh, 0);
+ while (1);
+}
obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
diff -Nur linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c
--- linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c 2005-08-28 17:01:50.948899632 +0200
-@@ -0,0 +1,131 @@
++++ linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c 2005-09-10 22:23:03.178338008 +0200
+@@ -0,0 +1,249 @@
+/*
-+ * Flash mapping for BCM947XX boards
++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ * Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
++ *
++ * original functions for finding root filesystem from Mike Baker
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
-+ * Copyright (C) 2001 Broadcom Corporation
++ * $Id: bcm47xx-flash.c,v 1.1 2004/10/21 07:18:31 jolt Exp $
+ *
-+ * $Id: bcm47xx-flash.c,v 1.1 2004/10/21 07:18:31 jolt Exp $
++ * Flash mapping for BCM947XX boards
+ */
+
+#include <linux/init.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/config.h>
++#include <typedefs.h>
++#include <bcmutils.h>
++#include <bcmnvram.h>
++#include <trxhdr.h>
++
++#ifdef CONFIG_MTD_PARTITIONS
++extern struct mtd_partition * init_mtd_partitions(struct mtd_info *mtd, size_t size);
++#endif
++
++#define CFE_SIZE 1024*384
++#define NVRAM_SIZE 1024*128
+
+#define WINDOW_ADDR 0x1c000000
+#define WINDOW_SIZE (0x400000*2)
+ phys: WINDOW_ADDR,
+};
+
-+#define SECTORS *64*1024
-+
+#ifdef CONFIG_MTD_PARTITIONS
-+#if 0
-+static struct mtd_partition bcm947xx_parts[] = {
-+// 64 - 4 - 14 - 1 = 45 = 8 + 37
-+ { name: "pmon", offset: 0, size: 4 SECTORS, mask_flags: MTD_WRITEABLE },
-+ { name: "linux", offset: MTDPART_OFS_APPEND, size: 14 SECTORS },
-+ { name: "rescue", offset: MTDPART_OFS_APPEND, size: 8 SECTORS },
-+ { name: "rootfs", offset: MTDPART_OFS_APPEND, size: 37 SECTORS },
-+ { name: "nvram", offset: MTDPART_OFS_APPEND, size: 1 SECTORS, mask_flags: MTD_WRITEABLE },
-+};
-+#else
++
+static struct mtd_partition bcm947xx_parts[] = {
-+ { name: "cfe",
-+ offset: 0,
-+ size: 384*1024,
-+ mask_flags: MTD_WRITEABLE
-+ },
-+ { name: "config",
-+ offset: MTDPART_OFS_APPEND,
-+ size: 128*1024
-+ },
-+ { name: "linux",
-+ offset: MTDPART_OFS_APPEND,
-+ size: 10*128*1024
-+ },
-+ { name: "jffs",
-+ offset: MTDPART_OFS_APPEND,
-+ size: (8*1024*1024)-((384*1024)+(128*1024)+(10*128*1024)+(128*1024)),
-+ },
-+ { name: "nvram",
-+ offset: MTDPART_OFS_APPEND,
-+ size: 128*1024,
-+ mask_flags: MTD_WRITEABLE
-+ },
++ { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
++ { name: "linux", offset: 0, size: 0, },
++ { name: "rootfs", offset: 0, size: 0, },
++ { name: "nvram", offset: 0, size: 0, },
++ { name: "OpenWrt", offset: 0, size: 0, },
++ { name: NULL, },
+};
-+#endif
++
++static int __init
++find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
++{
++ struct trx_header *trx;
++ unsigned char buf[512];
++ int off;
++ size_t len;
++
++ trx = (struct trx_header *) buf;
++
++ for (off = (512*1024); off < size; off += mtd->erasesize) {
++ memset(buf, 0xe5, sizeof(buf));
++
++ /*
++ * Read into buffer
++ */
++ if (MTD_READ(mtd, off, sizeof(buf), &len, buf) ||
++ len != sizeof(buf))
++ continue;
++
++ /* found a TRX header */
++ if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
++ part->offset = le32_to_cpu(trx->offsets[2]) ? :
++ le32_to_cpu(trx->offsets[1]);
++ part->size = le32_to_cpu(trx->len);
++
++ part->size -= part->offset;
++ part->offset += off;
++
++ goto done;
++ }
++ }
++
++ printk(KERN_NOTICE
++ "%s: Couldn't find root filesystem\n",
++ mtd->name);
++ return -1;
++
++ done:
++ return part->size;
++}
++
++struct mtd_partition * __init
++init_mtd_partitions(struct mtd_info *mtd, size_t size)
++{
++
++ /* boot loader */
++ bcm947xx_parts[0].offset = 0;
++ bcm947xx_parts[0].size = CFE_SIZE;
++
++ /* nvram (old config partition) */
++ bcm947xx_parts[3].offset = bcm947xx_parts[0].size;
++ bcm947xx_parts[3].size = NVRAM_SIZE;
++
++ /* Size linux (kernel and rootfs) */
++ /* do not count the elf loader, which is on one sector */
++ bcm947xx_parts[1].offset = bcm947xx_parts[0].size + bcm947xx_parts[3].size + mtd->erasesize;
++ bcm947xx_parts[1].size = size - NVRAM_SIZE - bcm947xx_parts[0].size -
++ bcm947xx_parts[3].size - mtd->erasesize;
++
++ /* Find and size rootfs */
++ if (find_root(mtd,size,&bcm947xx_parts[2])==0) {
++ /* entirely jffs2 */
++ bcm947xx_parts[2].size = size - bcm947xx_parts[2].offset - NVRAM_SIZE;
++ bcm947xx_parts[4].name = NULL;
++ } else {
++ /* legacy setup */
++ /* calculate leftover flash, and assign it to the jffs2 partition */
++ bcm947xx_parts[4].offset = bcm947xx_parts[2].offset + bcm947xx_parts[2].size;
++ if ((bcm947xx_parts[4].offset % mtd->erasesize) > 0) {
++ bcm947xx_parts[4].offset += mtd->erasesize -
++ (bcm947xx_parts[4].offset % mtd->erasesize);
++ }
++ bcm947xx_parts[4].size = size - NVRAM_SIZE - bcm947xx_parts[4].offset;
++ }
++
++ return bcm947xx_parts;
++}
++
++EXPORT_SYMBOL(init_mtd_partitions);
+#endif
+
+int __init init_bcm947xx_map(void)
+{
-+ bcm947xx_map.virt = (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
++ size_t size;
++ int ret = 0;
++#ifdef CONFIG_MTD_PARTITIONS
++ struct mtd_partition *parts;
++ int i;
++#endif
++
++ bcm947xx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
+
+ if (!bcm947xx_map.virt) {
+ printk("Failed to ioremap\n");
+
+ bcm947xx_mtd->owner = THIS_MODULE;
+
-+ printk(KERN_NOTICE "flash device: %x at %x\n", bcm947xx_mtd->size, WINDOW_ADDR);
++ size = bcm947xx_mtd->size;
++
++ printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", bcm947xx_mtd->size, WINDOW_ADDR);
+
+#ifdef CONFIG_MTD_PARTITIONS
-+ return add_mtd_partitions(bcm947xx_mtd, bcm947xx_parts, sizeof(bcm947xx_parts)/sizeof(bcm947xx_parts[0]));
-+#else
-+ return 0;
++ parts = init_mtd_partitions(bcm947xx_mtd, size);
++ for (i = 0; parts[i].name; i++);
++ ret = add_mtd_partitions(bcm947xx_mtd, parts, i);
++ if (ret) {
++ printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
++ goto fail;
++ }
+#endif
++
++ return 0;
++
++ fail:
++ if (bcm947xx_mtd)
++ map_destroy(bcm947xx_mtd);
++ if (bcm947xx_map.map_priv_1)
++ iounmap((void *) bcm947xx_map.map_priv_1);
++ bcm947xx_map.map_priv_1 = 0;
++ return ret;
+}
+
+void __exit cleanup_bcm947xx_map(void)
- br32(bp, B44_ENET_CTRL);
+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
+ sb_clock = 100000000; /* 100 MHz */
-+ else
-+ sb_clock = 62500000; /* 62.5 MHz */
-+
-+ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+ (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
-+ & MDIO_CTRL_MAXF_MASK)));
-+ br32(B44_MDIO_CTRL);
-+
-+ if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) {
-+ bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL);
-+ br32(B44_ENET_CTRL);
- bp->flags &= ~B44_FLAG_INTERNAL_PHY;
- } else {
-- u32 val = br32(bp, B44_DEVCTRL);
-+ u32 val = br32(B44_DEVCTRL);
-
- if (val & DEVCTRL_EPR) {
-- bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-- br32(bp, B44_DEVCTRL);
-+ bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-+ br32(B44_DEVCTRL);
- udelay(100);
- }
- bp->flags |= B44_FLAG_INTERNAL_PHY;
-@@ -1200,13 +1233,13 @@
- /* bp->lock is held. */
- static void __b44_set_mac_addr(struct b44 *bp)
- {
-- bw32(bp, B44_CAM_CTRL, 0);
-+ bw32(B44_CAM_CTRL, 0);
- if (!(bp->dev->flags & IFF_PROMISC)) {
- u32 val;
-
- __b44_cam_write(bp, bp->dev->dev_addr, 0);
-- val = br32(bp, B44_CAM_CTRL);
-- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ val = br32(B44_CAM_CTRL);
-+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
- }
- }
-
-@@ -1240,30 +1273,30 @@
- b44_setup_phy(bp);
-
- /* Enable CRC32, set proper LED modes and power on PHY */
-- bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-- bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-+ bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-+ bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-
- /* This sets the MAC address too. */
- __b44_set_rx_mode(bp->dev);
-
- /* MTU + eth header + possible VLAN tag + struct rx_header */
-- bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-- bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+ bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+ bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-
-- bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
-- bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-- bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-+ bw32(B44_TX_WMARK, 56); /* XXX magic */
-+ bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-+ bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-+ bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
- (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
-- bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-+ bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-
-- bw32(bp, B44_DMARX_PTR, bp->rx_pending);
-+ bw32(B44_DMARX_PTR, bp->rx_pending);
- bp->rx_prod = bp->rx_pending;
-
-- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-
-- val = br32(bp, B44_ENET_CTRL);
-- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
-+ val = br32(B44_ENET_CTRL);
-+ bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
- }
-
- static int b44_open(struct net_device *dev)
-@@ -1416,11 +1449,11 @@
- int i=0;
- unsigned char zero[6] = {0,0,0,0,0,0};
-
-- val = br32(bp, B44_RXCONFIG);
-+ val = br32(B44_RXCONFIG);
- val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
- if (dev->flags & IFF_PROMISC) {
- val |= RXCONFIG_PROMISC;
-- bw32(bp, B44_RXCONFIG, val);
-+ bw32(B44_RXCONFIG, val);
- } else {
- __b44_set_mac_addr(bp);
-
-@@ -1432,9 +1465,9 @@
- for(;i<64;i++) {
- __b44_cam_write(bp, zero, i);
- }
-- bw32(bp, B44_RXCONFIG, val);
-- val = br32(bp, B44_CAM_CTRL);
-- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ bw32(B44_RXCONFIG, val);
-+ val = br32(B44_CAM_CTRL);
-+ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
- }
- }
-
-@@ -1704,19 +1737,41 @@
- {
- u8 eeprom[128];
- int err;
-+ unsigned long flags;
-
-- err = b44_read_eeprom(bp, &eeprom[0]);
-- if (err)
-- goto out;
--
-- bp->dev->dev_addr[0] = eeprom[79];
-- bp->dev->dev_addr[1] = eeprom[78];
-- bp->dev->dev_addr[2] = eeprom[81];
-- bp->dev->dev_addr[3] = eeprom[80];
-- bp->dev->dev_addr[4] = eeprom[83];
-- bp->dev->dev_addr[5] = eeprom[82];
--
-- bp->phy_addr = eeprom[90] & 0x1f;
-+ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
-+ /*
-+ * BCM47xx boards don't have a EEPROM. The MAC is stored in
-+ * a NVRAM area somewhere in the flash memory. As we don't
-+ * know the location and/or the format of the NVRAM area
-+ * here, we simply rely on the bootloader to write the
-+ * MAC into the CAM.
-+ */
-+ spin_lock_irqsave(&bp->lock, flags);
-+ __b44_cam_read(bp, bp->dev->dev_addr, 0);
-+ spin_unlock_irqrestore(&bp->lock, flags);
-+
-+ /*
-+ * BCM47xx boards don't have a PHY. Usually there is a switch
-+ * chip with multiple PHYs connected to the PHY port.
-+ */
-+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+ bp->dma_offset = 0;
-+ } else {
-+ err = b44_read_eeprom(bp, &eeprom[0]);
-+ if (err)
-+ return err;
-+
-+ bp->dev->dev_addr[0] = eeprom[79];
-+ bp->dev->dev_addr[1] = eeprom[78];
-+ bp->dev->dev_addr[2] = eeprom[81];
-+ bp->dev->dev_addr[3] = eeprom[80];
-+ bp->dev->dev_addr[4] = eeprom[83];
-+ bp->dev->dev_addr[5] = eeprom[82];
-+
-+ bp->phy_addr = eeprom[90] & 0x1f;
-+ bp->dma_offset = SB_PCI_DMA;
-+ }
-
- /* With this, plus the rx_header prepended to the data by the
- * hardware, we'll land the ethernet header on a 2-byte boundary.
-@@ -1726,13 +1781,12 @@
- bp->imask = IMASK_DEF;
-
- bp->core_unit = ssb_core_unit(bp);
-- bp->dma_offset = SB_PCI_DMA;
-
- /* XXX - really required?
- bp->flags |= B44_FLAG_BUGGY_TXPTR;
- */
--out:
-- return err;
-+
-+ return 0;
- }
-
- static int __devinit b44_init_one(struct pci_dev *pdev,
-@@ -1810,7 +1864,7 @@
-
- spin_lock_init(&bp->lock);
-
-- bp->regs = ioremap(b44reg_base, b44reg_len);
-+ bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len);
- if (bp->regs == 0UL) {
- printk(KERN_ERR PFX "Cannot map device registers, "
- "aborting.\n");
-@@ -1871,7 +1925,8 @@
-
- pci_save_state(bp->pdev);
-
-- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
-+ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
- for (i = 0; i < 6; i++)
- printk("%2.2x%c", dev->dev_addr[i],
- i == 5 ? '\n' : ':');
-@@ -1879,7 +1934,7 @@
- return 0;
-
- err_out_iounmap:
-- iounmap(bp->regs);
-+ iounmap((void *) bp->regs);
-
- err_out_free_dev:
- free_netdev(dev);
-@@ -1901,7 +1956,7 @@
- struct b44 *bp = netdev_priv(dev);
-
- unregister_netdev(dev);
-- iounmap(bp->regs);
-+ iounmap((void *) bp->regs);
- free_netdev(dev);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-diff -Nur linux-2.6.12.5/drivers/net/b44.c.orig linux-2.6.12.5-brcm/drivers/net/b44.c.orig
---- linux-2.6.12.5/drivers/net/b44.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/net/b44.c.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,1978 @@
-+/* b44.c: Broadcom 4400 device driver.
-+ *
-+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-+ * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
-+ *
-+ * Distribute under GPL.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/if_ether.h>
-+#include <linux/etherdevice.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/version.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+
-+#include "b44.h"
-+
-+#define DRV_MODULE_NAME "b44"
-+#define PFX DRV_MODULE_NAME ": "
-+#define DRV_MODULE_VERSION "0.95"
-+#define DRV_MODULE_RELDATE "Aug 3, 2004"
-+
-+#define B44_DEF_MSG_ENABLE \
-+ (NETIF_MSG_DRV | \
-+ NETIF_MSG_PROBE | \
-+ NETIF_MSG_LINK | \
-+ NETIF_MSG_TIMER | \
-+ NETIF_MSG_IFDOWN | \
-+ NETIF_MSG_IFUP | \
-+ NETIF_MSG_RX_ERR | \
-+ NETIF_MSG_TX_ERR)
-+
-+/* length of time before we decide the hardware is borked,
-+ * and dev->tx_timeout() should be called to fix the problem
-+ */
-+#define B44_TX_TIMEOUT (5 * HZ)
-+
-+/* hardware minimum and maximum for a single frame's data payload */
-+#define B44_MIN_MTU 60
-+#define B44_MAX_MTU 1500
-+
-+#define B44_RX_RING_SIZE 512
-+#define B44_DEF_RX_RING_PENDING 200
-+#define B44_RX_RING_BYTES (sizeof(struct dma_desc) * \
-+ B44_RX_RING_SIZE)
-+#define B44_TX_RING_SIZE 512
-+#define B44_DEF_TX_RING_PENDING (B44_TX_RING_SIZE - 1)
-+#define B44_TX_RING_BYTES (sizeof(struct dma_desc) * \
-+ B44_TX_RING_SIZE)
-+#define B44_DMA_MASK 0x3fffffff
-+
-+#define TX_RING_GAP(BP) \
-+ (B44_TX_RING_SIZE - (BP)->tx_pending)
-+#define TX_BUFFS_AVAIL(BP) \
-+ (((BP)->tx_cons <= (BP)->tx_prod) ? \
-+ (BP)->tx_cons + (BP)->tx_pending - (BP)->tx_prod : \
-+ (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
-+#define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1))
-+
-+#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64)
-+#define TX_PKT_BUF_SZ (B44_MAX_MTU + ETH_HLEN + 8)
-+
-+/* minimum number of free TX descriptors required to wake up TX process */
-+#define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4)
-+
-+static char version[] __devinitdata =
-+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-+
-+MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller");
-+MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_MODULE_VERSION);
-+
-+static int b44_debug = -1; /* -1 == use B44_DEF_MSG_ENABLE as value */
-+module_param(b44_debug, int, 0);
-+MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
-+
-+static struct pci_device_id b44_pci_tbl[] = {
-+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+ { } /* terminate list with empty entry */
-+};
-+
-+MODULE_DEVICE_TABLE(pci, b44_pci_tbl);
-+
-+static void b44_halt(struct b44 *);
-+static void b44_init_rings(struct b44 *);
-+static void b44_init_hw(struct b44 *);
-+static int b44_poll(struct net_device *dev, int *budget);
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void b44_poll_controller(struct net_device *dev);
-+#endif
-+
-+static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
-+{
-+ return readl(bp->regs + reg);
-+}
-+
-+static inline void bw32(const struct b44 *bp,
-+ unsigned long reg, unsigned long val)
-+{
-+ writel(val, bp->regs + reg);
-+}
-+
-+static int b44_wait_bit(struct b44 *bp, unsigned long reg,
-+ u32 bit, unsigned long timeout, const int clear)
-+{
-+ unsigned long i;
-+
-+ for (i = 0; i < timeout; i++) {
-+ u32 val = br32(bp, reg);
-+
-+ if (clear && !(val & bit))
-+ break;
-+ if (!clear && (val & bit))
-+ break;
-+ udelay(10);
-+ }
-+ if (i == timeout) {
-+ printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register "
-+ "%lx to %s.\n",
-+ bp->dev->name,
-+ bit, reg,
-+ (clear ? "clear" : "set"));
-+ return -ENODEV;
-+ }
-+ return 0;
-+}
-+
-+/* Sonics SiliconBackplane support routines. ROFL, you should see all the
-+ * buzz words used on this company's website :-)
-+ *
-+ * All of these routines must be invoked with bp->lock held and
-+ * interrupts disabled.
-+ */
-+
-+#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
-+#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */
-+
-+static u32 ssb_get_core_rev(struct b44 *bp)
-+{
-+ return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
-+}
-+
-+static u32 ssb_pci_setup(struct b44 *bp, u32 cores)
-+{
-+ u32 bar_orig, pci_rev, val;
-+
-+ pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig);
-+ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR);
-+ pci_rev = ssb_get_core_rev(bp);
-+
-+ val = br32(bp, B44_SBINTVEC);
-+ val |= cores;
-+ bw32(bp, B44_SBINTVEC, val);
-+
-+ val = br32(bp, SSB_PCI_TRANS_2);
-+ val |= SSB_PCI_PREF | SSB_PCI_BURST;
-+ bw32(bp, SSB_PCI_TRANS_2, val);
-+
-+ pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig);
-+
-+ return pci_rev;
-+}
-+
-+static void ssb_core_disable(struct b44 *bp)
-+{
-+ if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET)
-+ return;
-+
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
-+ b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0);
-+ b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1);
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
-+ SBTMSLOW_REJECT | SBTMSLOW_RESET));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+}
-+
-+static void ssb_core_reset(struct b44 *bp)
-+{
-+ u32 val;
-+
-+ ssb_core_disable(bp);
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+
-+ /* Clear SERR if set, this is a hw bug workaround. */
-+ if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR)
-+ bw32(bp, B44_SBTMSHIGH, 0);
-+
-+ val = br32(bp, B44_SBIMSTATE);
-+ if (val & (SBIMSTATE_IBE | SBIMSTATE_TO))
-+ bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
-+
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+
-+ bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK));
-+ br32(bp, B44_SBTMSLOW);
-+ udelay(1);
-+}
-+
-+static int ssb_core_unit(struct b44 *bp)
-+{
-+#if 0
-+ u32 val = br32(bp, B44_SBADMATCH0);
-+ u32 base;
-+
-+ type = val & SBADMATCH0_TYPE_MASK;
-+ switch (type) {
-+ case 0:
-+ base = val & SBADMATCH0_BS0_MASK;
-+ break;
-+
-+ case 1:
-+ base = val & SBADMATCH0_BS1_MASK;
-+ break;
-+
-+ case 2:
-+ default:
-+ base = val & SBADMATCH0_BS2_MASK;
-+ break;
-+ };
-+#endif
-+ return 0;
-+}
-+
-+static int ssb_is_core_up(struct b44 *bp)
-+{
-+ return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
-+ == SBTMSLOW_CLOCK);
-+}
-+
-+static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
-+{
-+ u32 val;
-+
-+ val = ((u32) data[2]) << 24;
-+ val |= ((u32) data[3]) << 16;
-+ val |= ((u32) data[4]) << 8;
-+ val |= ((u32) data[5]) << 0;
-+ bw32(bp, B44_CAM_DATA_LO, val);
-+ val = (CAM_DATA_HI_VALID |
-+ (((u32) data[0]) << 8) |
-+ (((u32) data[1]) << 0));
-+ bw32(bp, B44_CAM_DATA_HI, val);
-+ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE |
-+ (index << CAM_CTRL_INDEX_SHIFT)));
-+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
-+}
-+
-+static inline void __b44_disable_ints(struct b44 *bp)
-+{
-+ bw32(bp, B44_IMASK, 0);
-+}
-+
-+static void b44_disable_ints(struct b44 *bp)
-+{
-+ __b44_disable_ints(bp);
-+
-+ /* Flush posted writes. */
-+ br32(bp, B44_IMASK);
-+}
-+
-+static void b44_enable_ints(struct b44 *bp)
-+{
-+ bw32(bp, B44_IMASK, bp->imask);
-+}
-+
-+static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+{
-+ int err;
-+
-+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
-+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+ (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
-+ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (reg << MDIO_DATA_RA_SHIFT) |
-+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
-+ err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-+ *val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA;
-+
-+ return err;
-+}
-+
-+static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+{
-+ bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
-+ bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+ (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
-+ (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+ (reg << MDIO_DATA_RA_SHIFT) |
-+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
-+ (val & MDIO_DATA_DATA)));
-+ return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-+}
-+
-+/* miilib interface */
-+/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
-+ * due to code existing before miilib use was added to this driver.
-+ * Someone should remove this artificial driver limitation in
-+ * b44_{read,write}phy. bp->phy_addr itself is fine (and needed).
-+ */
-+static int b44_mii_read(struct net_device *dev, int phy_id, int location)
-+{
-+ u32 val;
-+ struct b44 *bp = netdev_priv(dev);
-+ int rc = b44_readphy(bp, location, &val);
-+ if (rc)
-+ return 0xffffffff;
-+ return val;
-+}
-+
-+static void b44_mii_write(struct net_device *dev, int phy_id, int location,
-+ int val)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ b44_writephy(bp, location, val);
-+}
-+
-+static int b44_phy_reset(struct b44 *bp)
-+{
-+ u32 val;
-+ int err;
-+
-+ err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
-+ if (err)
-+ return err;
-+ udelay(100);
-+ err = b44_readphy(bp, MII_BMCR, &val);
-+ if (!err) {
-+ if (val & BMCR_RESET) {
-+ printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n",
-+ bp->dev->name);
-+ err = -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
-+{
-+ u32 val;
-+
-+ bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE);
-+ bp->flags |= pause_flags;
-+
-+ val = br32(bp, B44_RXCONFIG);
-+ if (pause_flags & B44_FLAG_RX_PAUSE)
-+ val |= RXCONFIG_FLOW;
-+ else
-+ val &= ~RXCONFIG_FLOW;
-+ bw32(bp, B44_RXCONFIG, val);
-+
-+ val = br32(bp, B44_MAC_FLOW);
-+ if (pause_flags & B44_FLAG_TX_PAUSE)
-+ val |= (MAC_FLOW_PAUSE_ENAB |
-+ (0xc0 & MAC_FLOW_RX_HI_WATER));
-+ else
-+ val &= ~MAC_FLOW_PAUSE_ENAB;
-+ bw32(bp, B44_MAC_FLOW, val);
-+}
-+
-+static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
-+{
-+ u32 pause_enab = bp->flags & (B44_FLAG_TX_PAUSE |
-+ B44_FLAG_RX_PAUSE);
-+
-+ if (local & ADVERTISE_PAUSE_CAP) {
-+ if (local & ADVERTISE_PAUSE_ASYM) {
-+ if (remote & LPA_PAUSE_CAP)
-+ pause_enab |= (B44_FLAG_TX_PAUSE |
-+ B44_FLAG_RX_PAUSE);
-+ else if (remote & LPA_PAUSE_ASYM)
-+ pause_enab |= B44_FLAG_RX_PAUSE;
-+ } else {
-+ if (remote & LPA_PAUSE_CAP)
-+ pause_enab |= (B44_FLAG_TX_PAUSE |
-+ B44_FLAG_RX_PAUSE);
-+ }
-+ } else if (local & ADVERTISE_PAUSE_ASYM) {
-+ if ((remote & LPA_PAUSE_CAP) &&
-+ (remote & LPA_PAUSE_ASYM))
-+ pause_enab |= B44_FLAG_TX_PAUSE;
-+ }
-+
-+ __b44_set_flow_ctrl(bp, pause_enab);
-+}
-+
-+static int b44_setup_phy(struct b44 *bp)
-+{
-+ u32 val;
-+ int err;
-+
-+ if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
-+ goto out;
-+ if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-+ val & MII_ALEDCTRL_ALLMSK)) != 0)
-+ goto out;
-+ if ((err = b44_readphy(bp, B44_MII_TLEDCTRL, &val)) != 0)
-+ goto out;
-+ if ((err = b44_writephy(bp, B44_MII_TLEDCTRL,
-+ val | MII_TLEDCTRL_ENABLE)) != 0)
-+ goto out;
-+
-+ if (!(bp->flags & B44_FLAG_FORCE_LINK)) {
-+ u32 adv = ADVERTISE_CSMA;
-+
-+ if (bp->flags & B44_FLAG_ADV_10HALF)
-+ adv |= ADVERTISE_10HALF;
-+ if (bp->flags & B44_FLAG_ADV_10FULL)
-+ adv |= ADVERTISE_10FULL;
-+ if (bp->flags & B44_FLAG_ADV_100HALF)
-+ adv |= ADVERTISE_100HALF;
-+ if (bp->flags & B44_FLAG_ADV_100FULL)
-+ adv |= ADVERTISE_100FULL;
-+
-+ if (bp->flags & B44_FLAG_PAUSE_AUTO)
-+ adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-+
-+ if ((err = b44_writephy(bp, MII_ADVERTISE, adv)) != 0)
-+ goto out;
-+ if ((err = b44_writephy(bp, MII_BMCR, (BMCR_ANENABLE |
-+ BMCR_ANRESTART))) != 0)
-+ goto out;
-+ } else {
-+ u32 bmcr;
-+
-+ if ((err = b44_readphy(bp, MII_BMCR, &bmcr)) != 0)
-+ goto out;
-+ bmcr &= ~(BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_SPEED100);
-+ if (bp->flags & B44_FLAG_100_BASE_T)
-+ bmcr |= BMCR_SPEED100;
-+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+ bmcr |= BMCR_FULLDPLX;
-+ if ((err = b44_writephy(bp, MII_BMCR, bmcr)) != 0)
-+ goto out;
-+
-+ /* Since we will not be negotiating there is no safe way
-+ * to determine if the link partner supports flow control
-+ * or not. So just disable it completely in this case.
-+ */
-+ b44_set_flow_ctrl(bp, 0, 0);
-+ }
-+
-+out:
-+ return err;
-+}
-+
-+static void b44_stats_update(struct b44 *bp)
-+{
-+ unsigned long reg;
-+ u32 *val;
-+
-+ val = &bp->hw_stats.tx_good_octets;
-+ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) {
-+ *val++ += br32(bp, reg);
-+ }
-+ val = &bp->hw_stats.rx_good_octets;
-+ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) {
-+ *val++ += br32(bp, reg);
-+ }
-+}
-+
-+static void b44_link_report(struct b44 *bp)
-+{
-+ if (!netif_carrier_ok(bp->dev)) {
-+ printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name);
-+ } else {
-+ printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
-+ bp->dev->name,
-+ (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
-+ (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
-+
-+ printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
-+ "%s for RX.\n",
-+ bp->dev->name,
-+ (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
-+ (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
-+ }
-+}
-+
-+static void b44_check_phy(struct b44 *bp)
-+{
-+ u32 bmsr, aux;
-+
-+ if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
-+ !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
-+ (bmsr != 0xffff)) {
-+ if (aux & MII_AUXCTRL_SPEED)
-+ bp->flags |= B44_FLAG_100_BASE_T;
-+ else
-+ bp->flags &= ~B44_FLAG_100_BASE_T;
-+ if (aux & MII_AUXCTRL_DUPLEX)
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ else
-+ bp->flags &= ~B44_FLAG_FULL_DUPLEX;
-+
-+ if (!netif_carrier_ok(bp->dev) &&
-+ (bmsr & BMSR_LSTATUS)) {
-+ u32 val = br32(bp, B44_TX_CTRL);
-+ u32 local_adv, remote_adv;
-+
-+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+ val |= TX_CTRL_DUPLEX;
-+ else
-+ val &= ~TX_CTRL_DUPLEX;
-+ bw32(bp, B44_TX_CTRL, val);
-+
-+ if (!(bp->flags & B44_FLAG_FORCE_LINK) &&
-+ !b44_readphy(bp, MII_ADVERTISE, &local_adv) &&
-+ !b44_readphy(bp, MII_LPA, &remote_adv))
-+ b44_set_flow_ctrl(bp, local_adv, remote_adv);
-+
-+ /* Link now up */
-+ netif_carrier_on(bp->dev);
-+ b44_link_report(bp);
-+ } else if (netif_carrier_ok(bp->dev) && !(bmsr & BMSR_LSTATUS)) {
-+ /* Link now down */
-+ netif_carrier_off(bp->dev);
-+ b44_link_report(bp);
-+ }
-+
-+ if (bmsr & BMSR_RFAULT)
-+ printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n",
-+ bp->dev->name);
-+ if (bmsr & BMSR_JCD)
-+ printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n",
-+ bp->dev->name);
-+ }
-+}
-+
-+static void b44_timer(unsigned long __opaque)
-+{
-+ struct b44 *bp = (struct b44 *) __opaque;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_check_phy(bp);
-+
-+ b44_stats_update(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ bp->timer.expires = jiffies + HZ;
-+ add_timer(&bp->timer);
-+}
-+
-+static void b44_tx(struct b44 *bp)
-+{
-+ u32 cur, cons;
-+
-+ cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
-+ cur /= sizeof(struct dma_desc);
-+
-+ /* XXX needs updating when NETIF_F_SG is supported */
-+ for (cons = bp->tx_cons; cons != cur; cons = NEXT_TX(cons)) {
-+ struct ring_info *rp = &bp->tx_buffers[cons];
-+ struct sk_buff *skb = rp->skb;
-+
-+ if (unlikely(skb == NULL))
-+ BUG();
-+
-+ pci_unmap_single(bp->pdev,
-+ pci_unmap_addr(rp, mapping),
-+ skb->len,
-+ PCI_DMA_TODEVICE);
-+ rp->skb = NULL;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ bp->tx_cons = cons;
-+ if (netif_queue_stopped(bp->dev) &&
-+ TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
-+ netif_wake_queue(bp->dev);
-+
-+ bw32(bp, B44_GPTIMER, 0);
-+}
-+
-+/* Works like this. This chip writes a 'struct rx_header" 30 bytes
-+ * before the DMA address you give it. So we allocate 30 more bytes
-+ * for the RX buffer, DMA map all of it, skb_reserve the 30 bytes, then
-+ * point the chip at 30 bytes past where the rx_header will go.
-+ */
-+static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
-+{
-+ struct dma_desc *dp;
-+ struct ring_info *src_map, *map;
-+ struct rx_header *rh;
-+ struct sk_buff *skb;
-+ dma_addr_t mapping;
-+ int dest_idx;
-+ u32 ctrl;
-+
-+ src_map = NULL;
-+ if (src_idx >= 0)
-+ src_map = &bp->rx_buffers[src_idx];
-+ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
-+ map = &bp->rx_buffers[dest_idx];
-+ skb = dev_alloc_skb(RX_PKT_BUF_SZ);
-+ if (skb == NULL)
-+ return -ENOMEM;
-+
-+ mapping = pci_map_single(bp->pdev, skb->data,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+
-+ /* Hardware bug work-around, the chip is unable to do PCI DMA
-+ to/from anything above 1GB :-( */
-+ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) {
-+ /* Sigh... */
-+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+ dev_kfree_skb_any(skb);
-+ skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
-+ if (skb == NULL)
-+ return -ENOMEM;
-+ mapping = pci_map_single(bp->pdev, skb->data,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+ if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) {
-+ pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+ dev_kfree_skb_any(skb);
-+ return -ENOMEM;
-+ }
-+ }
-+
-+ skb->dev = bp->dev;
-+ skb_reserve(skb, bp->rx_offset);
-+
-+ rh = (struct rx_header *)
-+ (skb->data - bp->rx_offset);
-+ rh->len = 0;
-+ rh->flags = 0;
-+
-+ map->skb = skb;
-+ pci_unmap_addr_set(map, mapping, mapping);
-+
-+ if (src_map != NULL)
-+ src_map->skb = NULL;
-+
-+ ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset));
-+ if (dest_idx == (B44_RX_RING_SIZE - 1))
-+ ctrl |= DESC_CTRL_EOT;
-+
-+ dp = &bp->rx_ring[dest_idx];
-+ dp->ctrl = cpu_to_le32(ctrl);
-+ dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
-+
-+ return RX_PKT_BUF_SZ;
-+}
-+
-+static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
-+{
-+ struct dma_desc *src_desc, *dest_desc;
-+ struct ring_info *src_map, *dest_map;
-+ struct rx_header *rh;
-+ int dest_idx;
-+ u32 ctrl;
-+
-+ dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
-+ dest_desc = &bp->rx_ring[dest_idx];
-+ dest_map = &bp->rx_buffers[dest_idx];
-+ src_desc = &bp->rx_ring[src_idx];
-+ src_map = &bp->rx_buffers[src_idx];
-+
-+ dest_map->skb = src_map->skb;
-+ rh = (struct rx_header *) src_map->skb->data;
-+ rh->len = 0;
-+ rh->flags = 0;
-+ pci_unmap_addr_set(dest_map, mapping,
-+ pci_unmap_addr(src_map, mapping));
-+
-+ ctrl = src_desc->ctrl;
-+ if (dest_idx == (B44_RX_RING_SIZE - 1))
-+ ctrl |= cpu_to_le32(DESC_CTRL_EOT);
-+ else
-+ ctrl &= cpu_to_le32(~DESC_CTRL_EOT);
-+
-+ dest_desc->ctrl = ctrl;
-+ dest_desc->addr = src_desc->addr;
-+ src_map->skb = NULL;
-+
-+ pci_dma_sync_single_for_device(bp->pdev, src_desc->addr,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+}
-+
-+static int b44_rx(struct b44 *bp, int budget)
-+{
-+ int received;
-+ u32 cons, prod;
-+
-+ received = 0;
-+ prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK;
-+ prod /= sizeof(struct dma_desc);
-+ cons = bp->rx_cons;
-+
-+ while (cons != prod && budget > 0) {
-+ struct ring_info *rp = &bp->rx_buffers[cons];
-+ struct sk_buff *skb = rp->skb;
-+ dma_addr_t map = pci_unmap_addr(rp, mapping);
-+ struct rx_header *rh;
-+ u16 len;
-+
-+ pci_dma_sync_single_for_cpu(bp->pdev, map,
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+ rh = (struct rx_header *) skb->data;
-+ len = cpu_to_le16(rh->len);
-+ if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
-+ (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
-+ drop_it:
-+ b44_recycle_rx(bp, cons, bp->rx_prod);
-+ drop_it_no_recycle:
-+ bp->stats.rx_dropped++;
-+ goto next_pkt;
-+ }
-+
-+ if (len == 0) {
-+ int i = 0;
-+
-+ do {
-+ udelay(2);
-+ barrier();
-+ len = cpu_to_le16(rh->len);
-+ } while (len == 0 && i++ < 5);
-+ if (len == 0)
-+ goto drop_it;
-+ }
-+
-+ /* Omit CRC. */
-+ len -= 4;
-+
-+ if (len > RX_COPY_THRESHOLD) {
-+ int skb_size;
-+ skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
-+ if (skb_size < 0)
-+ goto drop_it;
-+ pci_unmap_single(bp->pdev, map,
-+ skb_size, PCI_DMA_FROMDEVICE);
-+ /* Leave out rx_header */
-+ skb_put(skb, len+bp->rx_offset);
-+ skb_pull(skb,bp->rx_offset);
-+ } else {
-+ struct sk_buff *copy_skb;
-+
-+ b44_recycle_rx(bp, cons, bp->rx_prod);
-+ copy_skb = dev_alloc_skb(len + 2);
-+ if (copy_skb == NULL)
-+ goto drop_it_no_recycle;
-+
-+ copy_skb->dev = bp->dev;
-+ skb_reserve(copy_skb, 2);
-+ skb_put(copy_skb, len);
-+ /* DMA sync done above, copy just the actual packet */
-+ memcpy(copy_skb->data, skb->data+bp->rx_offset, len);
-+
-+ skb = copy_skb;
-+ }
-+ skb->ip_summed = CHECKSUM_NONE;
-+ skb->protocol = eth_type_trans(skb, bp->dev);
-+ netif_receive_skb(skb);
-+ bp->dev->last_rx = jiffies;
-+ received++;
-+ budget--;
-+ next_pkt:
-+ bp->rx_prod = (bp->rx_prod + 1) &
-+ (B44_RX_RING_SIZE - 1);
-+ cons = (cons + 1) & (B44_RX_RING_SIZE - 1);
-+ }
-+
-+ bp->rx_cons = cons;
-+ bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc));
-+
-+ return received;
-+}
-+
-+static int b44_poll(struct net_device *netdev, int *budget)
-+{
-+ struct b44 *bp = netdev_priv(netdev);
-+ int done;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
-+ /* spin_lock(&bp->tx_lock); */
-+ b44_tx(bp);
-+ /* spin_unlock(&bp->tx_lock); */
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ done = 1;
-+ if (bp->istat & ISTAT_RX) {
-+ int orig_budget = *budget;
-+ int work_done;
-+
-+ if (orig_budget > netdev->quota)
-+ orig_budget = netdev->quota;
-+
-+ work_done = b44_rx(bp, orig_budget);
-+
-+ *budget -= work_done;
-+ netdev->quota -= work_done;
-+
-+ if (work_done >= orig_budget)
-+ done = 0;
-+ }
-+
-+ if (bp->istat & ISTAT_ERRORS) {
-+ spin_lock_irq(&bp->lock);
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ netif_wake_queue(bp->dev);
-+ spin_unlock_irq(&bp->lock);
-+ done = 1;
-+ }
-+
-+ if (done) {
-+ netif_rx_complete(netdev);
-+ b44_enable_ints(bp);
-+ }
-+
-+ return (done ? 0 : 1);
-+}
-+
-+static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ struct net_device *dev = dev_id;
-+ struct b44 *bp = netdev_priv(dev);
-+ unsigned long flags;
-+ u32 istat, imask;
-+ int handled = 0;
-+
-+ spin_lock_irqsave(&bp->lock, flags);
-+
-+ istat = br32(bp, B44_ISTAT);
-+ imask = br32(bp, B44_IMASK);
-+
-+ /* ??? What the fuck is the purpose of the interrupt mask
-+ * ??? register if we have to mask it out by hand anyways?
-+ */
-+ istat &= imask;
-+ if (istat) {
-+ handled = 1;
-+ if (netif_rx_schedule_prep(dev)) {
-+ /* NOTE: These writes are posted by the readback of
-+ * the ISTAT register below.
-+ */
-+ bp->istat = istat;
-+ __b44_disable_ints(bp);
-+ __netif_rx_schedule(dev);
-+ } else {
-+ printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
-+ dev->name);
-+ }
-+
-+ bw32(bp, B44_ISTAT, istat);
-+ br32(bp, B44_ISTAT);
-+ }
-+ spin_unlock_irqrestore(&bp->lock, flags);
-+ return IRQ_RETVAL(handled);
-+}
-+
-+static void b44_tx_timeout(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
-+ dev->name);
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ netif_wake_queue(dev);
-+}
-+
-+static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct sk_buff *bounce_skb;
-+ dma_addr_t mapping;
-+ u32 len, entry, ctrl;
-+
-+ len = skb->len;
-+ spin_lock_irq(&bp->lock);
-+
-+ /* This is a hard error, log it. */
-+ if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
-+ netif_stop_queue(dev);
-+ spin_unlock_irq(&bp->lock);
-+ printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
-+ dev->name);
-+ return 1;
-+ }
-+
-+ mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-+ if(mapping+len > B44_DMA_MASK) {
-+ /* Chip can't handle DMA to/from >1GB, use bounce buffer */
-+ pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
-+
-+ bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
-+ GFP_ATOMIC|GFP_DMA);
-+ if (!bounce_skb)
-+ return NETDEV_TX_BUSY;
-+
-+ mapping = pci_map_single(bp->pdev, bounce_skb->data,
-+ len, PCI_DMA_TODEVICE);
-+ if(mapping+len > B44_DMA_MASK) {
-+ pci_unmap_single(bp->pdev, mapping,
-+ len, PCI_DMA_TODEVICE);
-+ dev_kfree_skb_any(bounce_skb);
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ memcpy(skb_put(bounce_skb, len), skb->data, skb->len);
-+ dev_kfree_skb_any(skb);
-+ skb = bounce_skb;
-+ }
-+
-+ entry = bp->tx_prod;
-+ bp->tx_buffers[entry].skb = skb;
-+ pci_unmap_addr_set(&bp->tx_buffers[entry], mapping, mapping);
-+
-+ ctrl = (len & DESC_CTRL_LEN);
-+ ctrl |= DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF;
-+ if (entry == (B44_TX_RING_SIZE - 1))
-+ ctrl |= DESC_CTRL_EOT;
-+
-+ bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl);
-+ bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
-+
-+ entry = NEXT_TX(entry);
-+
-+ bp->tx_prod = entry;
-+
-+ wmb();
-+
-+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+ if (bp->flags & B44_FLAG_BUGGY_TXPTR)
-+ bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+ if (bp->flags & B44_FLAG_REORDER_BUG)
-+ br32(bp, B44_DMATX_PTR);
-+
-+ if (TX_BUFFS_AVAIL(bp) < 1)
-+ netif_stop_queue(dev);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ dev->trans_start = jiffies;
-+
-+ return 0;
-+}
-+
-+static int b44_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (new_mtu < B44_MIN_MTU || new_mtu > B44_MAX_MTU)
-+ return -EINVAL;
-+
-+ if (!netif_running(dev)) {
-+ /* We'll just catch it later when the
-+ * device is up'd.
-+ */
-+ dev->mtu = new_mtu;
-+ return 0;
-+ }
-+
-+ spin_lock_irq(&bp->lock);
-+ b44_halt(bp);
-+ dev->mtu = new_mtu;
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+}
-+
-+/* Free up pending packets in all rx/tx rings.
-+ *
-+ * The chip has been shut down and the driver detached from
-+ * the networking, so no interrupts or new tx packets will
-+ * end up in the driver. bp->lock is not held and we are not
-+ * in an interrupt context and thus may sleep.
-+ */
-+static void b44_free_rings(struct b44 *bp)
-+{
-+ struct ring_info *rp;
-+ int i;
-+
-+ for (i = 0; i < B44_RX_RING_SIZE; i++) {
-+ rp = &bp->rx_buffers[i];
-+
-+ if (rp->skb == NULL)
-+ continue;
-+ pci_unmap_single(bp->pdev,
-+ pci_unmap_addr(rp, mapping),
-+ RX_PKT_BUF_SZ,
-+ PCI_DMA_FROMDEVICE);
-+ dev_kfree_skb_any(rp->skb);
-+ rp->skb = NULL;
-+ }
-+
-+ /* XXX needs changes once NETIF_F_SG is set... */
-+ for (i = 0; i < B44_TX_RING_SIZE; i++) {
-+ rp = &bp->tx_buffers[i];
-+
-+ if (rp->skb == NULL)
-+ continue;
-+ pci_unmap_single(bp->pdev,
-+ pci_unmap_addr(rp, mapping),
-+ rp->skb->len,
-+ PCI_DMA_TODEVICE);
-+ dev_kfree_skb_any(rp->skb);
-+ rp->skb = NULL;
-+ }
-+}
-+
-+/* Initialize tx/rx rings for packet processing.
-+ *
-+ * The chip has been shut down and the driver detached from
-+ * the networking, so no interrupts or new tx packets will
-+ * end up in the driver. bp->lock is not held and we are not
-+ * in an interrupt context and thus may sleep.
-+ */
-+static void b44_init_rings(struct b44 *bp)
-+{
-+ int i;
-+
-+ b44_free_rings(bp);
-+
-+ memset(bp->rx_ring, 0, B44_RX_RING_BYTES);
-+ memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
-+
-+ for (i = 0; i < bp->rx_pending; i++) {
-+ if (b44_alloc_rx_skb(bp, -1, i) < 0)
-+ break;
-+ }
-+}
-+
-+/*
-+ * Must not be invoked with interrupt sources disabled and
-+ * the hardware shutdown down.
-+ */
-+static void b44_free_consistent(struct b44 *bp)
-+{
-+ if (bp->rx_buffers) {
-+ kfree(bp->rx_buffers);
-+ bp->rx_buffers = NULL;
-+ }
-+ if (bp->tx_buffers) {
-+ kfree(bp->tx_buffers);
-+ bp->tx_buffers = NULL;
-+ }
-+ if (bp->rx_ring) {
-+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+ bp->rx_ring, bp->rx_ring_dma);
-+ bp->rx_ring = NULL;
-+ }
-+ if (bp->tx_ring) {
-+ pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+ bp->tx_ring, bp->tx_ring_dma);
-+ bp->tx_ring = NULL;
-+ }
-+}
-+
-+/*
-+ * Must not be invoked with interrupt sources disabled and
-+ * the hardware shutdown down. Can sleep.
-+ */
-+static int b44_alloc_consistent(struct b44 *bp)
-+{
-+ int size;
-+
-+ size = B44_RX_RING_SIZE * sizeof(struct ring_info);
-+ bp->rx_buffers = kmalloc(size, GFP_KERNEL);
-+ if (!bp->rx_buffers)
-+ goto out_err;
-+ memset(bp->rx_buffers, 0, size);
-+
-+ size = B44_TX_RING_SIZE * sizeof(struct ring_info);
-+ bp->tx_buffers = kmalloc(size, GFP_KERNEL);
-+ if (!bp->tx_buffers)
-+ goto out_err;
-+ memset(bp->tx_buffers, 0, size);
-+
-+ size = DMA_TABLE_BYTES;
-+ bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma);
-+ if (!bp->rx_ring)
-+ goto out_err;
-+
-+ bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma);
-+ if (!bp->tx_ring)
-+ goto out_err;
-+
-+ return 0;
-+
-+out_err:
-+ b44_free_consistent(bp);
-+ return -ENOMEM;
-+}
-+
-+/* bp->lock is held. */
-+static void b44_clear_stats(struct b44 *bp)
-+{
-+ unsigned long reg;
-+
-+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+ for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL)
-+ br32(bp, reg);
-+ for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL)
-+ br32(bp, reg);
-+}
-+
-+/* bp->lock is held. */
-+static void b44_chip_reset(struct b44 *bp)
-+{
-+ if (ssb_is_core_up(bp)) {
-+ bw32(bp, B44_RCV_LAZY, 0);
-+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
-+ b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1);
-+ bw32(bp, B44_DMATX_CTRL, 0);
-+ bp->tx_prod = bp->tx_cons = 0;
-+ if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) {
-+ b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE,
-+ 100, 0);
-+ }
-+ bw32(bp, B44_DMARX_CTRL, 0);
-+ bp->rx_prod = bp->rx_cons = 0;
-+ } else {
-+ ssb_pci_setup(bp, (bp->core_unit == 0 ?
-+ SBINTVEC_ENET0 :
-+ SBINTVEC_ENET1));
-+ }
-+
-+ ssb_core_reset(bp);
-+
-+ b44_clear_stats(bp);
-+
-+ /* Make PHY accessible. */
-+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+ (0x0d & MDIO_CTRL_MAXF_MASK)));
-+ br32(bp, B44_MDIO_CTRL);
-+
-+ if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-+ bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
-+ br32(bp, B44_ENET_CTRL);
-+ bp->flags &= ~B44_FLAG_INTERNAL_PHY;
-+ } else {
-+ u32 val = br32(bp, B44_DEVCTRL);
-+
-+ if (val & DEVCTRL_EPR) {
-+ bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-+ br32(bp, B44_DEVCTRL);
-+ udelay(100);
-+ }
-+ bp->flags |= B44_FLAG_INTERNAL_PHY;
-+ }
-+}
-+
-+/* bp->lock is held. */
-+static void b44_halt(struct b44 *bp)
-+{
-+ b44_disable_ints(bp);
-+ b44_chip_reset(bp);
-+}
-+
-+/* bp->lock is held. */
-+static void __b44_set_mac_addr(struct b44 *bp)
-+{
-+ bw32(bp, B44_CAM_CTRL, 0);
-+ if (!(bp->dev->flags & IFF_PROMISC)) {
-+ u32 val;
-+
-+ __b44_cam_write(bp, bp->dev->dev_addr, 0);
-+ val = br32(bp, B44_CAM_CTRL);
-+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ }
-+}
-+
-+static int b44_set_mac_addr(struct net_device *dev, void *p)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct sockaddr *addr = p;
-+
-+ if (netif_running(dev))
-+ return -EBUSY;
-+
-+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+ spin_lock_irq(&bp->lock);
-+ __b44_set_mac_addr(bp);
-+ spin_unlock_irq(&bp->lock);
-+
-+ return 0;
-+}
-+
-+/* Called at device open time to get the chip ready for
-+ * packet processing. Invoked with bp->lock held.
-+ */
-+static void __b44_set_rx_mode(struct net_device *);
-+static void b44_init_hw(struct b44 *bp)
-+{
-+ u32 val;
-+
-+ b44_chip_reset(bp);
-+ b44_phy_reset(bp);
-+ b44_setup_phy(bp);
-+
-+ /* Enable CRC32, set proper LED modes and power on PHY */
-+ bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-+ bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-+
-+ /* This sets the MAC address too. */
-+ __b44_set_rx_mode(bp->dev);
-+
-+ /* MTU + eth header + possible VLAN tag + struct rx_header */
-+ bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+ bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+
-+ bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
-+ bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-+ bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-+ bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-+ (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
-+ bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-+
-+ bw32(bp, B44_DMARX_PTR, bp->rx_pending);
-+ bp->rx_prod = bp->rx_pending;
-+
-+ bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+
-+ val = br32(bp, B44_ENET_CTRL);
-+ bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
-+}
-+
-+static int b44_open(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ int err;
-+
-+ err = b44_alloc_consistent(bp);
-+ if (err)
-+ return err;
-+
-+ err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
-+ if (err)
-+ goto err_out_free;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ bp->flags |= B44_FLAG_INIT_COMPLETE;
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ init_timer(&bp->timer);
-+ bp->timer.expires = jiffies + HZ;
-+ bp->timer.data = (unsigned long) bp;
-+ bp->timer.function = b44_timer;
-+ add_timer(&bp->timer);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+
-+err_out_free:
-+ b44_free_consistent(bp);
-+ return err;
-+}
-+
-+#if 0
-+/*static*/ void b44_dump_state(struct b44 *bp)
-+{
-+ u32 val32, val32_2, val32_3, val32_4, val32_5;
-+ u16 val16;
-+
-+ pci_read_config_word(bp->pdev, PCI_STATUS, &val16);
-+ printk("DEBUG: PCI status [%04x] \n", val16);
-+
-+}
-+#endif
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+/*
-+ * Polling receive - used by netconsole and other diagnostic tools
-+ * to allow network i/o with interrupts disabled.
-+ */
-+static void b44_poll_controller(struct net_device *dev)
-+{
-+ disable_irq(dev->irq);
-+ b44_interrupt(dev->irq, dev, NULL);
-+ enable_irq(dev->irq);
-+}
-+#endif
-+
-+static int b44_close(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ netif_stop_queue(dev);
-+
-+ del_timer_sync(&bp->timer);
-+
-+ spin_lock_irq(&bp->lock);
-+
-+#if 0
-+ b44_dump_state(bp);
-+#endif
-+ b44_halt(bp);
-+ b44_free_rings(bp);
-+ bp->flags &= ~B44_FLAG_INIT_COMPLETE;
-+ netif_carrier_off(bp->dev);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ free_irq(dev->irq, dev);
-+
-+ b44_free_consistent(bp);
-+
-+ return 0;
-+}
-+
-+static struct net_device_stats *b44_get_stats(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct net_device_stats *nstat = &bp->stats;
-+ struct b44_hw_stats *hwstat = &bp->hw_stats;
-+
-+ /* Convert HW stats into netdevice stats. */
-+ nstat->rx_packets = hwstat->rx_pkts;
-+ nstat->tx_packets = hwstat->tx_pkts;
-+ nstat->rx_bytes = hwstat->rx_octets;
-+ nstat->tx_bytes = hwstat->tx_octets;
-+ nstat->tx_errors = (hwstat->tx_jabber_pkts +
-+ hwstat->tx_oversize_pkts +
-+ hwstat->tx_underruns +
-+ hwstat->tx_excessive_cols +
-+ hwstat->tx_late_cols);
-+ nstat->multicast = hwstat->tx_multicast_pkts;
-+ nstat->collisions = hwstat->tx_total_cols;
-+
-+ nstat->rx_length_errors = (hwstat->rx_oversize_pkts +
-+ hwstat->rx_undersize);
-+ nstat->rx_over_errors = hwstat->rx_missed_pkts;
-+ nstat->rx_frame_errors = hwstat->rx_align_errs;
-+ nstat->rx_crc_errors = hwstat->rx_crc_errs;
-+ nstat->rx_errors = (hwstat->rx_jabber_pkts +
-+ hwstat->rx_oversize_pkts +
-+ hwstat->rx_missed_pkts +
-+ hwstat->rx_crc_align_errs +
-+ hwstat->rx_undersize +
-+ hwstat->rx_crc_errs +
-+ hwstat->rx_align_errs +
-+ hwstat->rx_symbol_errs);
-+
-+ nstat->tx_aborted_errors = hwstat->tx_underruns;
-+#if 0
-+ /* Carrier lost counter seems to be broken for some devices */
-+ nstat->tx_carrier_errors = hwstat->tx_carrier_lost;
-+#endif
-+
-+ return nstat;
-+}
-+
-+static int __b44_load_mcast(struct b44 *bp, struct net_device *dev)
-+{
-+ struct dev_mc_list *mclist;
-+ int i, num_ents;
-+
-+ num_ents = min_t(int, dev->mc_count, B44_MCAST_TABLE_SIZE);
-+ mclist = dev->mc_list;
-+ for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) {
-+ __b44_cam_write(bp, mclist->dmi_addr, i + 1);
-+ }
-+ return i+1;
-+}
-+
-+static void __b44_set_rx_mode(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ u32 val;
-+ int i=0;
-+ unsigned char zero[6] = {0,0,0,0,0,0};
-+
-+ val = br32(bp, B44_RXCONFIG);
-+ val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
-+ if (dev->flags & IFF_PROMISC) {
-+ val |= RXCONFIG_PROMISC;
-+ bw32(bp, B44_RXCONFIG, val);
-+ } else {
-+ __b44_set_mac_addr(bp);
-+
-+ if (dev->flags & IFF_ALLMULTI)
-+ val |= RXCONFIG_ALLMULTI;
-+ else
-+ i=__b44_load_mcast(bp, dev);
-+
-+ for(;i<64;i++) {
-+ __b44_cam_write(bp, zero, i);
-+ }
-+ bw32(bp, B44_RXCONFIG, val);
-+ val = br32(bp, B44_CAM_CTRL);
-+ bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+ }
-+}
-+
-+static void b44_set_rx_mode(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ spin_lock_irq(&bp->lock);
-+ __b44_set_rx_mode(dev);
-+ spin_unlock_irq(&bp->lock);
-+}
-+
-+static u32 b44_get_msglevel(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ return bp->msg_enable;
-+}
-+
-+static void b44_set_msglevel(struct net_device *dev, u32 value)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ bp->msg_enable = value;
-+}
-+
-+static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ struct pci_dev *pci_dev = bp->pdev;
-+
-+ strcpy (info->driver, DRV_MODULE_NAME);
-+ strcpy (info->version, DRV_MODULE_VERSION);
-+ strcpy (info->bus_info, pci_name(pci_dev));
-+}
-+
-+static int b44_nway_reset(struct net_device *dev)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+ u32 bmcr;
-+ int r;
-+
-+ spin_lock_irq(&bp->lock);
-+ b44_readphy(bp, MII_BMCR, &bmcr);
-+ b44_readphy(bp, MII_BMCR, &bmcr);
-+ r = -EINVAL;
-+ if (bmcr & BMCR_ANENABLE) {
-+ b44_writephy(bp, MII_BMCR,
-+ bmcr | BMCR_ANRESTART);
-+ r = 0;
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ return r;
-+}
-+
-+static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+ return -EAGAIN;
-+ cmd->supported = (SUPPORTED_Autoneg);
-+ cmd->supported |= (SUPPORTED_100baseT_Half |
-+ SUPPORTED_100baseT_Full |
-+ SUPPORTED_10baseT_Half |
-+ SUPPORTED_10baseT_Full |
-+ SUPPORTED_MII);
-+
-+ cmd->advertising = 0;
-+ if (bp->flags & B44_FLAG_ADV_10HALF)
-+ cmd->advertising |= ADVERTISE_10HALF;
-+ if (bp->flags & B44_FLAG_ADV_10FULL)
-+ cmd->advertising |= ADVERTISE_10FULL;
-+ if (bp->flags & B44_FLAG_ADV_100HALF)
-+ cmd->advertising |= ADVERTISE_100HALF;
-+ if (bp->flags & B44_FLAG_ADV_100FULL)
-+ cmd->advertising |= ADVERTISE_100FULL;
-+ cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-+ cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
-+ SPEED_100 : SPEED_10;
-+ cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
-+ DUPLEX_FULL : DUPLEX_HALF;
-+ cmd->port = 0;
-+ cmd->phy_address = bp->phy_addr;
-+ cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
-+ XCVR_INTERNAL : XCVR_EXTERNAL;
-+ cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
-+ AUTONEG_DISABLE : AUTONEG_ENABLE;
-+ cmd->maxtxpkt = 0;
-+ cmd->maxrxpkt = 0;
-+ return 0;
-+}
-+
-+static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+ return -EAGAIN;
-+
-+ /* We do not support gigabit. */
-+ if (cmd->autoneg == AUTONEG_ENABLE) {
-+ if (cmd->advertising &
-+ (ADVERTISED_1000baseT_Half |
-+ ADVERTISED_1000baseT_Full))
-+ return -EINVAL;
-+ } else if ((cmd->speed != SPEED_100 &&
-+ cmd->speed != SPEED_10) ||
-+ (cmd->duplex != DUPLEX_HALF &&
-+ cmd->duplex != DUPLEX_FULL)) {
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ if (cmd->autoneg == AUTONEG_ENABLE) {
-+ bp->flags &= ~B44_FLAG_FORCE_LINK;
-+ bp->flags &= ~(B44_FLAG_ADV_10HALF |
-+ B44_FLAG_ADV_10FULL |
-+ B44_FLAG_ADV_100HALF |
-+ B44_FLAG_ADV_100FULL);
-+ if (cmd->advertising & ADVERTISE_10HALF)
-+ bp->flags |= B44_FLAG_ADV_10HALF;
-+ if (cmd->advertising & ADVERTISE_10FULL)
-+ bp->flags |= B44_FLAG_ADV_10FULL;
-+ if (cmd->advertising & ADVERTISE_100HALF)
-+ bp->flags |= B44_FLAG_ADV_100HALF;
-+ if (cmd->advertising & ADVERTISE_100FULL)
-+ bp->flags |= B44_FLAG_ADV_100FULL;
-+ } else {
-+ bp->flags |= B44_FLAG_FORCE_LINK;
-+ if (cmd->speed == SPEED_100)
-+ bp->flags |= B44_FLAG_100_BASE_T;
-+ if (cmd->duplex == DUPLEX_FULL)
-+ bp->flags |= B44_FLAG_FULL_DUPLEX;
-+ }
-+
-+ b44_setup_phy(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+
-+ return 0;
-+}
-+
-+static void b44_get_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ering)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ ering->rx_max_pending = B44_RX_RING_SIZE - 1;
-+ ering->rx_pending = bp->rx_pending;
-+
-+ /* XXX ethtool lacks a tx_max_pending, oops... */
-+}
-+
-+static int b44_set_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ering)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if ((ering->rx_pending > B44_RX_RING_SIZE - 1) ||
-+ (ering->rx_mini_pending != 0) ||
-+ (ering->rx_jumbo_pending != 0) ||
-+ (ering->tx_pending > B44_TX_RING_SIZE - 1))
-+ return -EINVAL;
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ bp->rx_pending = ering->rx_pending;
-+ bp->tx_pending = ering->tx_pending;
-+
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ netif_wake_queue(bp->dev);
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+}
-+
-+static void b44_get_pauseparam(struct net_device *dev,
-+ struct ethtool_pauseparam *epause)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ epause->autoneg =
-+ (bp->flags & B44_FLAG_PAUSE_AUTO) != 0;
-+ epause->rx_pause =
-+ (bp->flags & B44_FLAG_RX_PAUSE) != 0;
-+ epause->tx_pause =
-+ (bp->flags & B44_FLAG_TX_PAUSE) != 0;
-+}
-+
-+static int b44_set_pauseparam(struct net_device *dev,
-+ struct ethtool_pauseparam *epause)
-+{
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ spin_lock_irq(&bp->lock);
-+ if (epause->autoneg)
-+ bp->flags |= B44_FLAG_PAUSE_AUTO;
-+ else
-+ bp->flags &= ~B44_FLAG_PAUSE_AUTO;
-+ if (epause->rx_pause)
-+ bp->flags |= B44_FLAG_RX_PAUSE;
-+ else
-+ bp->flags &= ~B44_FLAG_RX_PAUSE;
-+ if (epause->tx_pause)
-+ bp->flags |= B44_FLAG_TX_PAUSE;
-+ else
-+ bp->flags &= ~B44_FLAG_TX_PAUSE;
-+ if (bp->flags & B44_FLAG_PAUSE_AUTO) {
-+ b44_halt(bp);
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ } else {
-+ __b44_set_flow_ctrl(bp, bp->flags);
-+ }
-+ spin_unlock_irq(&bp->lock);
-+
-+ b44_enable_ints(bp);
-+
-+ return 0;
-+}
-+
-+static struct ethtool_ops b44_ethtool_ops = {
-+ .get_drvinfo = b44_get_drvinfo,
-+ .get_settings = b44_get_settings,
-+ .set_settings = b44_set_settings,
-+ .nway_reset = b44_nway_reset,
-+ .get_link = ethtool_op_get_link,
-+ .get_ringparam = b44_get_ringparam,
-+ .set_ringparam = b44_set_ringparam,
-+ .get_pauseparam = b44_get_pauseparam,
-+ .set_pauseparam = b44_set_pauseparam,
-+ .get_msglevel = b44_get_msglevel,
-+ .set_msglevel = b44_set_msglevel,
-+};
-+
-+static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = if_mii(ifr);
-+ struct b44 *bp = netdev_priv(dev);
-+ int err;
-+
-+ spin_lock_irq(&bp->lock);
-+ err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
-+ spin_unlock_irq(&bp->lock);
-+
-+ return err;
-+}
-+
-+/* Read 128-bytes of EEPROM. */
-+static int b44_read_eeprom(struct b44 *bp, u8 *data)
-+{
-+ long i;
-+ u16 *ptr = (u16 *) data;
-+
-+ for (i = 0; i < 128; i += 2)
-+ ptr[i / 2] = readw(bp->regs + 4096 + i);
-+
-+ return 0;
-+}
-+
-+static int __devinit b44_get_invariants(struct b44 *bp)
-+{
-+ u8 eeprom[128];
-+ int err;
-+
-+ err = b44_read_eeprom(bp, &eeprom[0]);
-+ if (err)
-+ goto out;
-+
-+ bp->dev->dev_addr[0] = eeprom[79];
-+ bp->dev->dev_addr[1] = eeprom[78];
-+ bp->dev->dev_addr[2] = eeprom[81];
-+ bp->dev->dev_addr[3] = eeprom[80];
-+ bp->dev->dev_addr[4] = eeprom[83];
-+ bp->dev->dev_addr[5] = eeprom[82];
-+
-+ bp->phy_addr = eeprom[90] & 0x1f;
-+
-+ /* With this, plus the rx_header prepended to the data by the
-+ * hardware, we'll land the ethernet header on a 2-byte boundary.
-+ */
-+ bp->rx_offset = 30;
-+
-+ bp->imask = IMASK_DEF;
-+
-+ bp->core_unit = ssb_core_unit(bp);
-+ bp->dma_offset = SB_PCI_DMA;
-+
-+ /* XXX - really required?
-+ bp->flags |= B44_FLAG_BUGGY_TXPTR;
-+ */
-+out:
-+ return err;
-+}
-+
-+static int __devinit b44_init_one(struct pci_dev *pdev,
-+ const struct pci_device_id *ent)
-+{
-+ static int b44_version_printed = 0;
-+ unsigned long b44reg_base, b44reg_len;
-+ struct net_device *dev;
-+ struct b44 *bp;
-+ int err, i;
-+
-+ if (b44_version_printed++ == 0)
-+ printk(KERN_INFO "%s", version);
-+
-+ err = pci_enable_device(pdev);
-+ if (err) {
-+ printk(KERN_ERR PFX "Cannot enable PCI device, "
-+ "aborting.\n");
-+ return err;
-+ }
-+
-+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-+ printk(KERN_ERR PFX "Cannot find proper PCI device "
-+ "base address, aborting.\n");
-+ err = -ENODEV;
-+ goto err_out_disable_pdev;
-+ }
-+
-+ err = pci_request_regions(pdev, DRV_MODULE_NAME);
-+ if (err) {
-+ printk(KERN_ERR PFX "Cannot obtain PCI resources, "
-+ "aborting.\n");
-+ goto err_out_disable_pdev;
-+ }
-+
-+ pci_set_master(pdev);
-+
-+ err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK);
-+ if (err) {
-+ printk(KERN_ERR PFX "No usable DMA configuration, "
-+ "aborting.\n");
-+ goto err_out_free_res;
-+ }
-+
-+ err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
-+ if (err) {
-+ printk(KERN_ERR PFX "No usable DMA configuration, "
-+ "aborting.\n");
-+ goto err_out_free_res;
-+ }
-+
-+ b44reg_base = pci_resource_start(pdev, 0);
-+ b44reg_len = pci_resource_len(pdev, 0);
-+
-+ dev = alloc_etherdev(sizeof(*bp));
-+ if (!dev) {
-+ printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
-+ err = -ENOMEM;
-+ goto err_out_free_res;
-+ }
-+
-+ SET_MODULE_OWNER(dev);
-+ SET_NETDEV_DEV(dev,&pdev->dev);
-+
-+ /* No interesting netdevice features in this card... */
-+ dev->features |= 0;
-+
-+ bp = netdev_priv(dev);
-+ bp->pdev = pdev;
-+ bp->dev = dev;
-+ if (b44_debug >= 0)
-+ bp->msg_enable = (1 << b44_debug) - 1;
-+ else
-+ bp->msg_enable = B44_DEF_MSG_ENABLE;
-+
-+ spin_lock_init(&bp->lock);
-+
-+ bp->regs = ioremap(b44reg_base, b44reg_len);
-+ if (bp->regs == 0UL) {
-+ printk(KERN_ERR PFX "Cannot map device registers, "
-+ "aborting.\n");
-+ err = -ENOMEM;
-+ goto err_out_free_dev;
-+ }
-+
-+ bp->rx_pending = B44_DEF_RX_RING_PENDING;
-+ bp->tx_pending = B44_DEF_TX_RING_PENDING;
-+
-+ dev->open = b44_open;
-+ dev->stop = b44_close;
-+ dev->hard_start_xmit = b44_start_xmit;
-+ dev->get_stats = b44_get_stats;
-+ dev->set_multicast_list = b44_set_rx_mode;
-+ dev->set_mac_address = b44_set_mac_addr;
-+ dev->do_ioctl = b44_ioctl;
-+ dev->tx_timeout = b44_tx_timeout;
-+ dev->poll = b44_poll;
-+ dev->weight = 64;
-+ dev->watchdog_timeo = B44_TX_TIMEOUT;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ dev->poll_controller = b44_poll_controller;
-+#endif
-+ dev->change_mtu = b44_change_mtu;
-+ dev->irq = pdev->irq;
-+ SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
-+
-+ err = b44_get_invariants(bp);
-+ if (err) {
-+ printk(KERN_ERR PFX "Problem fetching invariants of chip, "
-+ "aborting.\n");
-+ goto err_out_iounmap;
-+ }
-+
-+ bp->mii_if.dev = dev;
-+ bp->mii_if.mdio_read = b44_mii_read;
-+ bp->mii_if.mdio_write = b44_mii_write;
-+ bp->mii_if.phy_id = bp->phy_addr;
-+ bp->mii_if.phy_id_mask = 0x1f;
-+ bp->mii_if.reg_num_mask = 0x1f;
-+
-+ /* By default, advertise all speed/duplex settings. */
-+ bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL |
-+ B44_FLAG_ADV_100HALF | B44_FLAG_ADV_100FULL);
-+
-+ /* By default, auto-negotiate PAUSE. */
-+ bp->flags |= B44_FLAG_PAUSE_AUTO;
-+
-+ err = register_netdev(dev);
-+ if (err) {
-+ printk(KERN_ERR PFX "Cannot register net device, "
-+ "aborting.\n");
-+ goto err_out_iounmap;
-+ }
-+
-+ pci_set_drvdata(pdev, dev);
-+
-+ pci_save_state(bp->pdev);
-+
-+ printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+ for (i = 0; i < 6; i++)
-+ printk("%2.2x%c", dev->dev_addr[i],
-+ i == 5 ? '\n' : ':');
-+
-+ return 0;
-+
-+err_out_iounmap:
-+ iounmap(bp->regs);
-+
-+err_out_free_dev:
-+ free_netdev(dev);
-+
-+err_out_free_res:
-+ pci_release_regions(pdev);
-+
-+err_out_disable_pdev:
-+ pci_disable_device(pdev);
-+ pci_set_drvdata(pdev, NULL);
-+ return err;
-+}
-+
-+static void __devexit b44_remove_one(struct pci_dev *pdev)
-+{
-+ struct net_device *dev = pci_get_drvdata(pdev);
-+
-+ if (dev) {
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ unregister_netdev(dev);
-+ iounmap(bp->regs);
-+ free_netdev(dev);
-+ pci_release_regions(pdev);
-+ pci_disable_device(pdev);
-+ pci_set_drvdata(pdev, NULL);
-+ }
-+}
-+
-+static int b44_suspend(struct pci_dev *pdev, pm_message_t state)
-+{
-+ struct net_device *dev = pci_get_drvdata(pdev);
-+ struct b44 *bp = netdev_priv(dev);
-+
-+ if (!netif_running(dev))
-+ return 0;
-+
-+ del_timer_sync(&bp->timer);
-+
-+ spin_lock_irq(&bp->lock);
-+
-+ b44_halt(bp);
-+ netif_carrier_off(bp->dev);
-+ netif_device_detach(bp->dev);
-+ b44_free_rings(bp);
-+
-+ spin_unlock_irq(&bp->lock);
-+ return 0;
-+}
-+
-+static int b44_resume(struct pci_dev *pdev)
-+{
-+ struct net_device *dev = pci_get_drvdata(pdev);
-+ struct b44 *bp = netdev_priv(dev);
++ else
++ sb_clock = 62500000; /* 62.5 MHz */
+
-+ pci_restore_state(pdev);
++ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
++ (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
++ & MDIO_CTRL_MAXF_MASK)));
++ br32(B44_MDIO_CTRL);
+
-+ if (!netif_running(dev))
-+ return 0;
++ if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) {
++ bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL);
++ br32(B44_ENET_CTRL);
+ bp->flags &= ~B44_FLAG_INTERNAL_PHY;
+ } else {
+- u32 val = br32(bp, B44_DEVCTRL);
++ u32 val = br32(B44_DEVCTRL);
+
+ if (val & DEVCTRL_EPR) {
+- bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
+- br32(bp, B44_DEVCTRL);
++ bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR));
++ br32(B44_DEVCTRL);
+ udelay(100);
+ }
+ bp->flags |= B44_FLAG_INTERNAL_PHY;
+@@ -1200,13 +1233,13 @@
+ /* bp->lock is held. */
+ static void __b44_set_mac_addr(struct b44 *bp)
+ {
+- bw32(bp, B44_CAM_CTRL, 0);
++ bw32(B44_CAM_CTRL, 0);
+ if (!(bp->dev->flags & IFF_PROMISC)) {
+ u32 val;
+
+ __b44_cam_write(bp, bp->dev->dev_addr, 0);
+- val = br32(bp, B44_CAM_CTRL);
+- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
++ val = br32(B44_CAM_CTRL);
++ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
+ }
+ }
+
+@@ -1240,30 +1273,30 @@
+ b44_setup_phy(bp);
+
+ /* Enable CRC32, set proper LED modes and power on PHY */
+- bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
+- bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
++ bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
++ bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
+
+ /* This sets the MAC address too. */
+ __b44_set_rx_mode(bp->dev);
+
+ /* MTU + eth header + possible VLAN tag + struct rx_header */
+- bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
+- bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
++ bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
++ bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
+
+- bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
+- bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
+- bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
+- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
++ bw32(B44_TX_WMARK, 56); /* XXX magic */
++ bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
++ bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
++ bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
+ (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
+- bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
++ bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
+
+- bw32(bp, B44_DMARX_PTR, bp->rx_pending);
++ bw32(B44_DMARX_PTR, bp->rx_pending);
+ bp->rx_prod = bp->rx_pending;
+
+- bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
++ bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
+
+- val = br32(bp, B44_ENET_CTRL);
+- bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
++ val = br32(B44_ENET_CTRL);
++ bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
+ }
+
+ static int b44_open(struct net_device *dev)
+@@ -1416,11 +1449,11 @@
+ int i=0;
+ unsigned char zero[6] = {0,0,0,0,0,0};
+
+- val = br32(bp, B44_RXCONFIG);
++ val = br32(B44_RXCONFIG);
+ val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
+ if (dev->flags & IFF_PROMISC) {
+ val |= RXCONFIG_PROMISC;
+- bw32(bp, B44_RXCONFIG, val);
++ bw32(B44_RXCONFIG, val);
+ } else {
+ __b44_set_mac_addr(bp);
+
+@@ -1432,9 +1465,9 @@
+ for(;i<64;i++) {
+ __b44_cam_write(bp, zero, i);
+ }
+- bw32(bp, B44_RXCONFIG, val);
+- val = br32(bp, B44_CAM_CTRL);
+- bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
++ bw32(B44_RXCONFIG, val);
++ val = br32(B44_CAM_CTRL);
++ bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
+ }
+ }
+
+@@ -1704,19 +1737,41 @@
+ {
+ u8 eeprom[128];
+ int err;
++ unsigned long flags;
+
+- err = b44_read_eeprom(bp, &eeprom[0]);
+- if (err)
+- goto out;
+-
+- bp->dev->dev_addr[0] = eeprom[79];
+- bp->dev->dev_addr[1] = eeprom[78];
+- bp->dev->dev_addr[2] = eeprom[81];
+- bp->dev->dev_addr[3] = eeprom[80];
+- bp->dev->dev_addr[4] = eeprom[83];
+- bp->dev->dev_addr[5] = eeprom[82];
+-
+- bp->phy_addr = eeprom[90] & 0x1f;
++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
++ /*
++ * BCM47xx boards don't have a EEPROM. The MAC is stored in
++ * a NVRAM area somewhere in the flash memory. As we don't
++ * know the location and/or the format of the NVRAM area
++ * here, we simply rely on the bootloader to write the
++ * MAC into the CAM.
++ */
++ spin_lock_irqsave(&bp->lock, flags);
++ __b44_cam_read(bp, bp->dev->dev_addr, 0);
++ spin_unlock_irqrestore(&bp->lock, flags);
+
-+ spin_lock_irq(&bp->lock);
++ /*
++ * BCM47xx boards don't have a PHY. Usually there is a switch
++ * chip with multiple PHYs connected to the PHY port.
++ */
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++ bp->dma_offset = 0;
++ } else {
++ err = b44_read_eeprom(bp, &eeprom[0]);
++ if (err)
++ return err;
+
-+ b44_init_rings(bp);
-+ b44_init_hw(bp);
-+ netif_device_attach(bp->dev);
-+ spin_unlock_irq(&bp->lock);
++ bp->dev->dev_addr[0] = eeprom[79];
++ bp->dev->dev_addr[1] = eeprom[78];
++ bp->dev->dev_addr[2] = eeprom[81];
++ bp->dev->dev_addr[3] = eeprom[80];
++ bp->dev->dev_addr[4] = eeprom[83];
++ bp->dev->dev_addr[5] = eeprom[82];
+
-+ bp->timer.expires = jiffies + HZ;
-+ add_timer(&bp->timer);
++ bp->phy_addr = eeprom[90] & 0x1f;
++ bp->dma_offset = SB_PCI_DMA;
++ }
+
+ /* With this, plus the rx_header prepended to the data by the
+ * hardware, we'll land the ethernet header on a 2-byte boundary.
+@@ -1726,13 +1781,12 @@
+ bp->imask = IMASK_DEF;
+
+ bp->core_unit = ssb_core_unit(bp);
+- bp->dma_offset = SB_PCI_DMA;
+
+ /* XXX - really required?
+ bp->flags |= B44_FLAG_BUGGY_TXPTR;
+ */
+-out:
+- return err;
+
-+ b44_enable_ints(bp);
+ return 0;
-+}
-+
-+static struct pci_driver b44_driver = {
-+ .name = DRV_MODULE_NAME,
-+ .id_table = b44_pci_tbl,
-+ .probe = b44_init_one,
-+ .remove = __devexit_p(b44_remove_one),
-+ .suspend = b44_suspend,
-+ .resume = b44_resume,
-+};
-+
-+static int __init b44_init(void)
-+{
-+ return pci_module_init(&b44_driver);
-+}
-+
-+static void __exit b44_cleanup(void)
-+{
-+ pci_unregister_driver(&b44_driver);
-+}
-+
-+module_init(b44_init);
-+module_exit(b44_cleanup);
-+
+ }
+
+ static int __devinit b44_init_one(struct pci_dev *pdev,
+@@ -1810,7 +1864,7 @@
+
+ spin_lock_init(&bp->lock);
+
+- bp->regs = ioremap(b44reg_base, b44reg_len);
++ bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len);
+ if (bp->regs == 0UL) {
+ printk(KERN_ERR PFX "Cannot map device registers, "
+ "aborting.\n");
+@@ -1871,7 +1925,8 @@
+
+ pci_save_state(bp->pdev);
+
+- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
++ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
++ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
+ for (i = 0; i < 6; i++)
+ printk("%2.2x%c", dev->dev_addr[i],
+ i == 5 ? '\n' : ':');
+@@ -1879,7 +1934,7 @@
+ return 0;
+
+ err_out_iounmap:
+- iounmap(bp->regs);
++ iounmap((void *) bp->regs);
+
+ err_out_free_dev:
+ free_netdev(dev);
+@@ -1901,7 +1956,7 @@
+ struct b44 *bp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+- iounmap(bp->regs);
++ iounmap((void *) bp->regs);
+ free_netdev(dev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
diff -Nur linux-2.6.12.5/drivers/net/b44.h linux-2.6.12.5-brcm/drivers/net/b44.h
--- linux-2.6.12.5/drivers/net/b44.h 2005-08-15 02:20:18.000000000 +0200
+++ linux-2.6.12.5-brcm/drivers/net/b44.h 2005-08-28 11:12:20.694819024 +0200
struct pci_dev *pdev;
struct net_device *dev;
-diff -Nur linux-2.6.12.5/drivers/net/b44.h.orig linux-2.6.12.5-brcm/drivers/net/b44.h.orig
---- linux-2.6.12.5/drivers/net/b44.h.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/net/b44.h.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,427 @@
-+#ifndef _B44_H
-+#define _B44_H
-+
-+/* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */
-+#define B44_DEVCTRL 0x0000UL /* Device Control */
-+#define DEVCTRL_MPM 0x00000040 /* Magic Packet PME Enable (B0 only) */
-+#define DEVCTRL_PFE 0x00000080 /* Pattern Filtering Enable */
-+#define DEVCTRL_IPP 0x00000400 /* Internal EPHY Present */
-+#define DEVCTRL_EPR 0x00008000 /* EPHY Reset */
-+#define DEVCTRL_PME 0x00001000 /* PHY Mode Enable */
-+#define DEVCTRL_PMCE 0x00002000 /* PHY Mode Clocks Enable */
-+#define DEVCTRL_PADDR 0x0007c000 /* PHY Address */
-+#define DEVCTRL_PADDR_SHIFT 18
-+#define B44_BIST_STAT 0x000CUL /* Built-In Self-Test Status */
-+#define B44_WKUP_LEN 0x0010UL /* Wakeup Length */
-+#define WKUP_LEN_P0_MASK 0x0000007f /* Pattern 0 */
-+#define WKUP_LEN_D0 0x00000080
-+#define WKUP_LEN_P1_MASK 0x00007f00 /* Pattern 1 */
-+#define WKUP_LEN_P1_SHIFT 8
-+#define WKUP_LEN_D1 0x00008000
-+#define WKUP_LEN_P2_MASK 0x007f0000 /* Pattern 2 */
-+#define WKUP_LEN_P2_SHIFT 16
-+#define WKUP_LEN_D2 0x00000000
-+#define WKUP_LEN_P3_MASK 0x7f000000 /* Pattern 3 */
-+#define WKUP_LEN_P3_SHIFT 24
-+#define WKUP_LEN_D3 0x80000000
-+#define B44_ISTAT 0x0020UL /* Interrupt Status */
-+#define ISTAT_LS 0x00000020 /* Link Change (B0 only) */
-+#define ISTAT_PME 0x00000040 /* Power Management Event */
-+#define ISTAT_TO 0x00000080 /* General Purpose Timeout */
-+#define ISTAT_DSCE 0x00000400 /* Descriptor Error */
-+#define ISTAT_DATAE 0x00000800 /* Data Error */
-+#define ISTAT_DPE 0x00001000 /* Descr. Protocol Error */
-+#define ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */
-+#define ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */
-+#define ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */
-+#define ISTAT_RX 0x00010000 /* RX Interrupt */
-+#define ISTAT_TX 0x01000000 /* TX Interrupt */
-+#define ISTAT_EMAC 0x04000000 /* EMAC Interrupt */
-+#define ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */
-+#define ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */
-+#define ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU)
-+#define B44_IMASK 0x0024UL /* Interrupt Mask */
-+#define IMASK_DEF (ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX)
-+#define B44_GPTIMER 0x0028UL /* General Purpose Timer */
-+#define B44_ADDR_LO 0x0088UL /* ENET Address Lo (B0 only) */
-+#define B44_ADDR_HI 0x008CUL /* ENET Address Hi (B0 only) */
-+#define B44_FILT_ADDR 0x0090UL /* ENET Filter Address */
-+#define B44_FILT_DATA 0x0094UL /* ENET Filter Data */
-+#define B44_TXBURST 0x00A0UL /* TX Max Burst Length */
-+#define B44_RXBURST 0x00A4UL /* RX Max Burst Length */
-+#define B44_MAC_CTRL 0x00A8UL /* MAC Control */
-+#define MAC_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */
-+#define MAC_CTRL_PHY_PDOWN 0x00000004 /* Onchip EPHY Powerdown */
-+#define MAC_CTRL_PHY_EDET 0x00000008 /* Onchip EPHY Energy Detected */
-+#define MAC_CTRL_PHY_LEDCTRL 0x000000e0 /* Onchip EPHY LED Control */
-+#define MAC_CTRL_PHY_LEDCTRL_SHIFT 5
-+#define B44_MAC_FLOW 0x00ACUL /* MAC Flow Control */
-+#define MAC_FLOW_RX_HI_WATER 0x000000ff /* Receive FIFO HI Water Mark */
-+#define MAC_FLOW_PAUSE_ENAB 0x00008000 /* Enable Pause Frame Generation */
-+#define B44_RCV_LAZY 0x0100UL /* Lazy Interrupt Control */
-+#define RCV_LAZY_TO_MASK 0x00ffffff /* Timeout */
-+#define RCV_LAZY_FC_MASK 0xff000000 /* Frame Count */
-+#define RCV_LAZY_FC_SHIFT 24
-+#define B44_DMATX_CTRL 0x0200UL /* DMA TX Control */
-+#define DMATX_CTRL_ENABLE 0x00000001 /* Enable */
-+#define DMATX_CTRL_SUSPEND 0x00000002 /* Suepend Request */
-+#define DMATX_CTRL_LPBACK 0x00000004 /* Loopback Enable */
-+#define DMATX_CTRL_FAIRPRIOR 0x00000008 /* Fair Priority */
-+#define DMATX_CTRL_FLUSH 0x00000010 /* Flush Request */
-+#define B44_DMATX_ADDR 0x0204UL /* DMA TX Descriptor Ring Address */
-+#define B44_DMATX_PTR 0x0208UL /* DMA TX Last Posted Descriptor */
-+#define B44_DMATX_STAT 0x020CUL /* DMA TX Current Active Desc. + Status */
-+#define DMATX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
-+#define DMATX_STAT_SMASK 0x0000f000 /* State Mask */
-+#define DMATX_STAT_SDISABLED 0x00000000 /* State Disabled */
-+#define DMATX_STAT_SACTIVE 0x00001000 /* State Active */
-+#define DMATX_STAT_SIDLE 0x00002000 /* State Idle Wait */
-+#define DMATX_STAT_SSTOPPED 0x00003000 /* State Stopped */
-+#define DMATX_STAT_SSUSP 0x00004000 /* State Suspend Pending */
-+#define DMATX_STAT_EMASK 0x000f0000 /* Error Mask */
-+#define DMATX_STAT_ENONE 0x00000000 /* Error None */
-+#define DMATX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
-+#define DMATX_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */
-+#define DMATX_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */
-+#define DMATX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
-+#define DMATX_STAT_FLUSHED 0x00100000 /* Flushed */
-+#define B44_DMARX_CTRL 0x0210UL /* DMA RX Control */
-+#define DMARX_CTRL_ENABLE 0x00000001 /* Enable */
-+#define DMARX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */
-+#define DMARX_CTRL_ROSHIFT 1 /* Receive Offset Shift */
-+#define B44_DMARX_ADDR 0x0214UL /* DMA RX Descriptor Ring Address */
-+#define B44_DMARX_PTR 0x0218UL /* DMA RX Last Posted Descriptor */
-+#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */
-+#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
-+#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */
-+#define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */
-+#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */
-+#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */
-+#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */
-+#define DMARX_STAT_EMASK 0x000f0000 /* Error Mask */
-+#define DMARX_STAT_ENONE 0x00000000 /* Error None */
-+#define DMARX_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
-+#define DMARX_STAT_EDFO 0x00020000 /* Error Data FIFO Overflow */
-+#define DMARX_STAT_EBEBW 0x00030000 /* Error Bus Error on Buffer Write */
-+#define DMARX_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
-+#define B44_DMAFIFO_AD 0x0220UL /* DMA FIFO Diag Address */
-+#define DMAFIFO_AD_OMASK 0x0000ffff /* Offset Mask */
-+#define DMAFIFO_AD_SMASK 0x000f0000 /* Select Mask */
-+#define DMAFIFO_AD_SXDD 0x00000000 /* Select Transmit DMA Data */
-+#define DMAFIFO_AD_SXDP 0x00010000 /* Select Transmit DMA Pointers */
-+#define DMAFIFO_AD_SRDD 0x00040000 /* Select Receive DMA Data */
-+#define DMAFIFO_AD_SRDP 0x00050000 /* Select Receive DMA Pointers */
-+#define DMAFIFO_AD_SXFD 0x00080000 /* Select Transmit FIFO Data */
-+#define DMAFIFO_AD_SXFP 0x00090000 /* Select Transmit FIFO Pointers */
-+#define DMAFIFO_AD_SRFD 0x000c0000 /* Select Receive FIFO Data */
-+#define DMAFIFO_AD_SRFP 0x000c0000 /* Select Receive FIFO Pointers */
-+#define B44_DMAFIFO_LO 0x0224UL /* DMA FIFO Diag Low Data */
-+#define B44_DMAFIFO_HI 0x0228UL /* DMA FIFO Diag High Data */
-+#define B44_RXCONFIG 0x0400UL /* EMAC RX Config */
-+#define RXCONFIG_DBCAST 0x00000001 /* Disable Broadcast */
-+#define RXCONFIG_ALLMULTI 0x00000002 /* Accept All Multicast */
-+#define RXCONFIG_NORX_WHILE_TX 0x00000004 /* Receive Disable While Transmitting */
-+#define RXCONFIG_PROMISC 0x00000008 /* Promiscuous Enable */
-+#define RXCONFIG_LPBACK 0x00000010 /* Loopback Enable */
-+#define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */
-+#define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
-+#define RXCONFIG_RFILT 0x00000080 /* Reject Filter */
-+#define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */
-+#define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */
-+#define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */
-+#define MDIO_CTRL_MAXF_MASK 0x0000007f /* MDC Frequency */
-+#define MDIO_CTRL_PREAMBLE 0x00000080 /* MII Preamble Enable */
-+#define B44_MDIO_DATA 0x0414UL /* EMAC MDIO Data */
-+#define MDIO_DATA_DATA 0x0000ffff /* R/W Data */
-+#define MDIO_DATA_TA_MASK 0x00030000 /* Turnaround Value */
-+#define MDIO_DATA_TA_SHIFT 16
-+#define MDIO_TA_VALID 2
-+#define MDIO_DATA_RA_MASK 0x007c0000 /* Register Address */
-+#define MDIO_DATA_RA_SHIFT 18
-+#define MDIO_DATA_PMD_MASK 0x0f800000 /* Physical Media Device */
-+#define MDIO_DATA_PMD_SHIFT 23
-+#define MDIO_DATA_OP_MASK 0x30000000 /* Opcode */
-+#define MDIO_DATA_OP_SHIFT 28
-+#define MDIO_OP_WRITE 1
-+#define MDIO_OP_READ 2
-+#define MDIO_DATA_SB_MASK 0xc0000000 /* Start Bits */
-+#define MDIO_DATA_SB_SHIFT 30
-+#define MDIO_DATA_SB_START 0x40000000 /* Start Of Frame */
-+#define B44_EMAC_IMASK 0x0418UL /* EMAC Interrupt Mask */
-+#define B44_EMAC_ISTAT 0x041CUL /* EMAC Interrupt Status */
-+#define EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */
-+#define EMAC_INT_MIB 0x00000002 /* MIB Interrupt */
-+#define EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */
-+#define B44_CAM_DATA_LO 0x0420UL /* EMAC CAM Data Low */
-+#define B44_CAM_DATA_HI 0x0424UL /* EMAC CAM Data High */
-+#define CAM_DATA_HI_VALID 0x00010000 /* Valid Bit */
-+#define B44_CAM_CTRL 0x0428UL /* EMAC CAM Control */
-+#define CAM_CTRL_ENABLE 0x00000001 /* CAM Enable */
-+#define CAM_CTRL_MSEL 0x00000002 /* Mask Select */
-+#define CAM_CTRL_READ 0x00000004 /* Read */
-+#define CAM_CTRL_WRITE 0x00000008 /* Read */
-+#define CAM_CTRL_INDEX_MASK 0x003f0000 /* Index Mask */
-+#define CAM_CTRL_INDEX_SHIFT 16
-+#define CAM_CTRL_BUSY 0x80000000 /* CAM Busy */
-+#define B44_ENET_CTRL 0x042CUL /* EMAC ENET Control */
-+#define ENET_CTRL_ENABLE 0x00000001 /* EMAC Enable */
-+#define ENET_CTRL_DISABLE 0x00000002 /* EMAC Disable */
-+#define ENET_CTRL_SRST 0x00000004 /* EMAC Soft Reset */
-+#define ENET_CTRL_EPSEL 0x00000008 /* External PHY Select */
-+#define B44_TX_CTRL 0x0430UL /* EMAC TX Control */
-+#define TX_CTRL_DUPLEX 0x00000001 /* Full Duplex */
-+#define TX_CTRL_FMODE 0x00000002 /* Flow Mode */
-+#define TX_CTRL_SBENAB 0x00000004 /* Single Backoff Enable */
-+#define TX_CTRL_SMALL_SLOT 0x00000008 /* Small Slottime */
-+#define B44_TX_WMARK 0x0434UL /* EMAC TX Watermark */
-+#define B44_MIB_CTRL 0x0438UL /* EMAC MIB Control */
-+#define MIB_CTRL_CLR_ON_READ 0x00000001 /* Autoclear on Read */
-+#define B44_TX_GOOD_O 0x0500UL /* MIB TX Good Octets */
-+#define B44_TX_GOOD_P 0x0504UL /* MIB TX Good Packets */
-+#define B44_TX_O 0x0508UL /* MIB TX Octets */
-+#define B44_TX_P 0x050CUL /* MIB TX Packets */
-+#define B44_TX_BCAST 0x0510UL /* MIB TX Broadcast Packets */
-+#define B44_TX_MCAST 0x0514UL /* MIB TX Multicast Packets */
-+#define B44_TX_64 0x0518UL /* MIB TX <= 64 byte Packets */
-+#define B44_TX_65_127 0x051CUL /* MIB TX 65 to 127 byte Packets */
-+#define B44_TX_128_255 0x0520UL /* MIB TX 128 to 255 byte Packets */
-+#define B44_TX_256_511 0x0524UL /* MIB TX 256 to 511 byte Packets */
-+#define B44_TX_512_1023 0x0528UL /* MIB TX 512 to 1023 byte Packets */
-+#define B44_TX_1024_MAX 0x052CUL /* MIB TX 1024 to max byte Packets */
-+#define B44_TX_JABBER 0x0530UL /* MIB TX Jabber Packets */
-+#define B44_TX_OSIZE 0x0534UL /* MIB TX Oversize Packets */
-+#define B44_TX_FRAG 0x0538UL /* MIB TX Fragment Packets */
-+#define B44_TX_URUNS 0x053CUL /* MIB TX Underruns */
-+#define B44_TX_TCOLS 0x0540UL /* MIB TX Total Collisions */
-+#define B44_TX_SCOLS 0x0544UL /* MIB TX Single Collisions */
-+#define B44_TX_MCOLS 0x0548UL /* MIB TX Multiple Collisions */
-+#define B44_TX_ECOLS 0x054CUL /* MIB TX Excessive Collisions */
-+#define B44_TX_LCOLS 0x0550UL /* MIB TX Late Collisions */
-+#define B44_TX_DEFERED 0x0554UL /* MIB TX Defered Packets */
-+#define B44_TX_CLOST 0x0558UL /* MIB TX Carrier Lost */
-+#define B44_TX_PAUSE 0x055CUL /* MIB TX Pause Packets */
-+#define B44_RX_GOOD_O 0x0580UL /* MIB RX Good Octets */
-+#define B44_RX_GOOD_P 0x0584UL /* MIB RX Good Packets */
-+#define B44_RX_O 0x0588UL /* MIB RX Octets */
-+#define B44_RX_P 0x058CUL /* MIB RX Packets */
-+#define B44_RX_BCAST 0x0590UL /* MIB RX Broadcast Packets */
-+#define B44_RX_MCAST 0x0594UL /* MIB RX Multicast Packets */
-+#define B44_RX_64 0x0598UL /* MIB RX <= 64 byte Packets */
-+#define B44_RX_65_127 0x059CUL /* MIB RX 65 to 127 byte Packets */
-+#define B44_RX_128_255 0x05A0UL /* MIB RX 128 to 255 byte Packets */
-+#define B44_RX_256_511 0x05A4UL /* MIB RX 256 to 511 byte Packets */
-+#define B44_RX_512_1023 0x05A8UL /* MIB RX 512 to 1023 byte Packets */
-+#define B44_RX_1024_MAX 0x05ACUL /* MIB RX 1024 to max byte Packets */
-+#define B44_RX_JABBER 0x05B0UL /* MIB RX Jabber Packets */
-+#define B44_RX_OSIZE 0x05B4UL /* MIB RX Oversize Packets */
-+#define B44_RX_FRAG 0x05B8UL /* MIB RX Fragment Packets */
-+#define B44_RX_MISS 0x05BCUL /* MIB RX Missed Packets */
-+#define B44_RX_CRCA 0x05C0UL /* MIB RX CRC Align Errors */
-+#define B44_RX_USIZE 0x05C4UL /* MIB RX Undersize Packets */
-+#define B44_RX_CRC 0x05C8UL /* MIB RX CRC Errors */
-+#define B44_RX_ALIGN 0x05CCUL /* MIB RX Align Errors */
-+#define B44_RX_SYM 0x05D0UL /* MIB RX Symbol Errors */
-+#define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */
-+#define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */
-+
-+/* Silicon backplane register definitions */
-+#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */
-+#define SBIMSTATE_PC 0x0000000f /* Pipe Count */
-+#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
-+#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
-+#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */
-+#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */
-+#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */
-+#define SBIMSTATE_IBE 0x00020000 /* In Band Error */
-+#define SBIMSTATE_TO 0x00040000 /* Timeout */
-+#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */
-+#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
-+#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
-+#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
-+#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
-+#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */
-+#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
-+#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
-+#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */
-+#define SBTMSLOW_RESET 0x00000001 /* Reset */
-+#define SBTMSLOW_REJECT 0x00000002 /* Reject */
-+#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */
-+#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
-+#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */
-+#define SBTMSLOW_BE 0x80000000 /* BIST Enable */
-+#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */
-+#define SBTMSHIGH_SERR 0x00000001 /* S-error */
-+#define SBTMSHIGH_INT 0x00000002 /* Interrupt */
-+#define SBTMSHIGH_BUSY 0x00000004 /* Busy */
-+#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */
-+#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */
-+#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */
-+#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */
-+#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */
-+#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */
-+#define SBIDHIGH_CC_SHIFT 4
-+#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */
-+#define SBIDHIGH_VC_SHIFT 16
-+
-+/* SSB PCI config space registers. */
-+#define SSB_BAR0_WIN 0x80
-+#define SSB_BAR1_WIN 0x84
-+#define SSB_SPROM_CONTROL 0x88
-+#define SSB_BAR1_CONTROL 0x8c
-+
-+/* SSB core and host control registers. */
-+#define SSB_CONTROL 0x0000UL
-+#define SSB_ARBCONTROL 0x0010UL
-+#define SSB_ISTAT 0x0020UL
-+#define SSB_IMASK 0x0024UL
-+#define SSB_MBOX 0x0028UL
-+#define SSB_BCAST_ADDR 0x0050UL
-+#define SSB_BCAST_DATA 0x0054UL
-+#define SSB_PCI_TRANS_0 0x0100UL
-+#define SSB_PCI_TRANS_1 0x0104UL
-+#define SSB_PCI_TRANS_2 0x0108UL
-+#define SSB_SPROM 0x0800UL
-+
-+#define SSB_PCI_MEM 0x00000000
-+#define SSB_PCI_IO 0x00000001
-+#define SSB_PCI_CFG0 0x00000002
-+#define SSB_PCI_CFG1 0x00000003
-+#define SSB_PCI_PREF 0x00000004
-+#define SSB_PCI_BURST 0x00000008
-+#define SSB_PCI_MASK0 0xfc000000
-+#define SSB_PCI_MASK1 0xfc000000
-+#define SSB_PCI_MASK2 0xc0000000
-+
-+/* 4400 PHY registers */
-+#define B44_MII_AUXCTRL 24 /* Auxiliary Control */
-+#define MII_AUXCTRL_DUPLEX 0x0001 /* Full Duplex */
-+#define MII_AUXCTRL_SPEED 0x0002 /* 1=100Mbps, 0=10Mbps */
-+#define MII_AUXCTRL_FORCED 0x0004 /* Forced 10/100 */
-+#define B44_MII_ALEDCTRL 26 /* Activity LED */
-+#define MII_ALEDCTRL_ALLMSK 0x7fff
-+#define B44_MII_TLEDCTRL 27 /* Traffic Meter LED */
-+#define MII_TLEDCTRL_ENABLE 0x0040
-+
-+struct dma_desc {
-+ u32 ctrl;
-+ u32 addr;
-+};
-+
-+/* There are only 12 bits in the DMA engine for descriptor offsetting
-+ * so the table must be aligned on a boundary of this.
-+ */
-+#define DMA_TABLE_BYTES 4096
-+
-+#define DESC_CTRL_LEN 0x00001fff
-+#define DESC_CTRL_CMASK 0x0ff00000 /* Core specific bits */
-+#define DESC_CTRL_EOT 0x10000000 /* End of Table */
-+#define DESC_CTRL_IOC 0x20000000 /* Interrupt On Completion */
-+#define DESC_CTRL_EOF 0x40000000 /* End of Frame */
-+#define DESC_CTRL_SOF 0x80000000 /* Start of Frame */
-+
-+#define RX_COPY_THRESHOLD 256
-+
-+struct rx_header {
-+ u16 len;
-+ u16 flags;
-+ u16 pad[12];
-+};
-+#define RX_HEADER_LEN 28
-+
-+#define RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */
-+#define RX_FLAG_CRCERR 0x00000002 /* CRC Error */
-+#define RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */
-+#define RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */
-+#define RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */
-+#define RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */
-+#define RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */
-+#define RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */
-+#define RX_FLAG_LAST 0x00000800 /* Last buffer in frame */
-+#define RX_FLAG_ERRORS (RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO)
-+
-+struct ring_info {
-+ struct sk_buff *skb;
-+ DECLARE_PCI_UNMAP_ADDR(mapping);
-+};
-+
-+#define B44_MCAST_TABLE_SIZE 32
-+
-+/* SW copy of device statistics, kept up to date by periodic timer
-+ * which probes HW values. Must have same relative layout as HW
-+ * register above, because b44_stats_update depends upon this.
-+ */
-+struct b44_hw_stats {
-+ u32 tx_good_octets, tx_good_pkts, tx_octets;
-+ u32 tx_pkts, tx_broadcast_pkts, tx_multicast_pkts;
-+ u32 tx_len_64, tx_len_65_to_127, tx_len_128_to_255;
-+ u32 tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max;
-+ u32 tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts;
-+ u32 tx_underruns, tx_total_cols, tx_single_cols;
-+ u32 tx_multiple_cols, tx_excessive_cols, tx_late_cols;
-+ u32 tx_defered, tx_carrier_lost, tx_pause_pkts;
-+ u32 __pad1[8];
-+
-+ u32 rx_good_octets, rx_good_pkts, rx_octets;
-+ u32 rx_pkts, rx_broadcast_pkts, rx_multicast_pkts;
-+ u32 rx_len_64, rx_len_65_to_127, rx_len_128_to_255;
-+ u32 rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max;
-+ u32 rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts;
-+ u32 rx_missed_pkts, rx_crc_align_errs, rx_undersize;
-+ u32 rx_crc_errs, rx_align_errs, rx_symbol_errs;
-+ u32 rx_pause_pkts, rx_nonpause_pkts;
-+};
-+
-+struct b44 {
-+ spinlock_t lock;
-+
-+ u32 imask, istat;
-+
-+ struct dma_desc *rx_ring, *tx_ring;
-+
-+ u32 tx_prod, tx_cons;
-+ u32 rx_prod, rx_cons;
-+
-+ struct ring_info *rx_buffers;
-+ struct ring_info *tx_buffers;
-+
-+ u32 dma_offset;
-+ u32 flags;
-+#define B44_FLAG_INIT_COMPLETE 0x00000001
-+#define B44_FLAG_BUGGY_TXPTR 0x00000002
-+#define B44_FLAG_REORDER_BUG 0x00000004
-+#define B44_FLAG_PAUSE_AUTO 0x00008000
-+#define B44_FLAG_FULL_DUPLEX 0x00010000
-+#define B44_FLAG_100_BASE_T 0x00020000
-+#define B44_FLAG_TX_PAUSE 0x00040000
-+#define B44_FLAG_RX_PAUSE 0x00080000
-+#define B44_FLAG_FORCE_LINK 0x00100000
-+#define B44_FLAG_ADV_10HALF 0x01000000
-+#define B44_FLAG_ADV_10FULL 0x02000000
-+#define B44_FLAG_ADV_100HALF 0x04000000
-+#define B44_FLAG_ADV_100FULL 0x08000000
-+#define B44_FLAG_INTERNAL_PHY 0x10000000
-+
-+ u32 rx_offset;
-+
-+ u32 msg_enable;
-+
-+ struct timer_list timer;
-+
-+ struct net_device_stats stats;
-+ struct b44_hw_stats hw_stats;
-+
-+ void __iomem *regs;
-+ struct pci_dev *pdev;
-+ struct net_device *dev;
-+
-+ dma_addr_t rx_ring_dma, tx_ring_dma;
-+
-+ u32 rx_pending;
-+ u32 tx_pending;
-+ u8 phy_addr;
-+ u8 core_unit;
-+
-+ struct mii_if_info mii_if;
-+};
-+
-+#endif /* _B44_H */
diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h
--- linux-2.6.12.5/include/asm-mips/bootinfo.h 2005-08-15 02:20:18.000000000 +0200
+++ linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h 2005-08-28 11:12:20.695818872 +0200
#define PCI_VENDOR_ID_TOPIC 0x151f
#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
-diff -Nur linux-2.6.12.5/include/linux/pci_ids.h.orig linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig
---- linux-2.6.12.5/include/linux/pci_ids.h.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig 2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,2609 @@
-+/*
-+ * PCI Class, Vendor and Device IDs
-+ *
-+ * Please keep sorted.
-+ */
-+
-+/* Device classes and subclasses */
-+
-+#define PCI_CLASS_NOT_DEFINED 0x0000
-+#define PCI_CLASS_NOT_DEFINED_VGA 0x0001
-+
-+#define PCI_BASE_CLASS_STORAGE 0x01
-+#define PCI_CLASS_STORAGE_SCSI 0x0100
-+#define PCI_CLASS_STORAGE_IDE 0x0101
-+#define PCI_CLASS_STORAGE_FLOPPY 0x0102
-+#define PCI_CLASS_STORAGE_IPI 0x0103
-+#define PCI_CLASS_STORAGE_RAID 0x0104
-+#define PCI_CLASS_STORAGE_OTHER 0x0180
-+
-+#define PCI_BASE_CLASS_NETWORK 0x02
-+#define PCI_CLASS_NETWORK_ETHERNET 0x0200
-+#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201
-+#define PCI_CLASS_NETWORK_FDDI 0x0202
-+#define PCI_CLASS_NETWORK_ATM 0x0203
-+#define PCI_CLASS_NETWORK_OTHER 0x0280
-+
-+#define PCI_BASE_CLASS_DISPLAY 0x03
-+#define PCI_CLASS_DISPLAY_VGA 0x0300
-+#define PCI_CLASS_DISPLAY_XGA 0x0301
-+#define PCI_CLASS_DISPLAY_3D 0x0302
-+#define PCI_CLASS_DISPLAY_OTHER 0x0380
-+
-+#define PCI_BASE_CLASS_MULTIMEDIA 0x04
-+#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400
-+#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401
-+#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402
-+#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480
-+
-+#define PCI_BASE_CLASS_MEMORY 0x05
-+#define PCI_CLASS_MEMORY_RAM 0x0500
-+#define PCI_CLASS_MEMORY_FLASH 0x0501
-+#define PCI_CLASS_MEMORY_OTHER 0x0580
-+
-+#define PCI_BASE_CLASS_BRIDGE 0x06
-+#define PCI_CLASS_BRIDGE_HOST 0x0600
-+#define PCI_CLASS_BRIDGE_ISA 0x0601
-+#define PCI_CLASS_BRIDGE_EISA 0x0602
-+#define PCI_CLASS_BRIDGE_MC 0x0603
-+#define PCI_CLASS_BRIDGE_PCI 0x0604
-+#define PCI_CLASS_BRIDGE_PCMCIA 0x0605
-+#define PCI_CLASS_BRIDGE_NUBUS 0x0606
-+#define PCI_CLASS_BRIDGE_CARDBUS 0x0607
-+#define PCI_CLASS_BRIDGE_RACEWAY 0x0608
-+#define PCI_CLASS_BRIDGE_OTHER 0x0680
-+
-+#define PCI_BASE_CLASS_COMMUNICATION 0x07
-+#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700
-+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
-+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
-+#define PCI_CLASS_COMMUNICATION_MODEM 0x0703
-+#define PCI_CLASS_COMMUNICATION_OTHER 0x0780
-+
-+#define PCI_BASE_CLASS_SYSTEM 0x08
-+#define PCI_CLASS_SYSTEM_PIC 0x0800
-+#define PCI_CLASS_SYSTEM_DMA 0x0801
-+#define PCI_CLASS_SYSTEM_TIMER 0x0802
-+#define PCI_CLASS_SYSTEM_RTC 0x0803
-+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804
-+#define PCI_CLASS_SYSTEM_OTHER 0x0880
-+
-+#define PCI_BASE_CLASS_INPUT 0x09
-+#define PCI_CLASS_INPUT_KEYBOARD 0x0900
-+#define PCI_CLASS_INPUT_PEN 0x0901
-+#define PCI_CLASS_INPUT_MOUSE 0x0902
-+#define PCI_CLASS_INPUT_SCANNER 0x0903
-+#define PCI_CLASS_INPUT_GAMEPORT 0x0904
-+#define PCI_CLASS_INPUT_OTHER 0x0980
-+
-+#define PCI_BASE_CLASS_DOCKING 0x0a
-+#define PCI_CLASS_DOCKING_GENERIC 0x0a00
-+#define PCI_CLASS_DOCKING_OTHER 0x0a80
-+
-+#define PCI_BASE_CLASS_PROCESSOR 0x0b
-+#define PCI_CLASS_PROCESSOR_386 0x0b00
-+#define PCI_CLASS_PROCESSOR_486 0x0b01
-+#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02
-+#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10
-+#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20
-+#define PCI_CLASS_PROCESSOR_MIPS 0x0b30
-+#define PCI_CLASS_PROCESSOR_CO 0x0b40
-+
-+#define PCI_BASE_CLASS_SERIAL 0x0c
-+#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00
-+#define PCI_CLASS_SERIAL_ACCESS 0x0c01
-+#define PCI_CLASS_SERIAL_SSA 0x0c02
-+#define PCI_CLASS_SERIAL_USB 0x0c03
-+#define PCI_CLASS_SERIAL_FIBER 0x0c04
-+#define PCI_CLASS_SERIAL_SMBUS 0x0c05
-+
-+#define PCI_BASE_CLASS_INTELLIGENT 0x0e
-+#define PCI_CLASS_INTELLIGENT_I2O 0x0e00
-+
-+#define PCI_BASE_CLASS_SATELLITE 0x0f
-+#define PCI_CLASS_SATELLITE_TV 0x0f00
-+#define PCI_CLASS_SATELLITE_AUDIO 0x0f01
-+#define PCI_CLASS_SATELLITE_VOICE 0x0f03
-+#define PCI_CLASS_SATELLITE_DATA 0x0f04
-+
-+#define PCI_BASE_CLASS_CRYPT 0x10
-+#define PCI_CLASS_CRYPT_NETWORK 0x1000
-+#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001
-+#define PCI_CLASS_CRYPT_OTHER 0x1080
-+
-+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
-+#define PCI_CLASS_SP_DPIO 0x1100
-+#define PCI_CLASS_SP_OTHER 0x1180
-+
-+#define PCI_CLASS_OTHERS 0xff
-+
-+/* Vendors and devices. Sort key: vendor first, device next. */
-+
-+#define PCI_VENDOR_ID_DYNALINK 0x0675
-+#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702
-+
-+#define PCI_VENDOR_ID_BERKOM 0x0871
-+#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1
-+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2
-+#define PCI_DEVICE_ID_BERKOM_A4T 0xffa4
-+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8
-+
-+#define PCI_VENDOR_ID_COMPAQ 0x0e11
-+#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508
-+#define PCI_DEVICE_ID_COMPAQ_1280 0x3033
-+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX 0x4000
-+#define PCI_DEVICE_ID_COMPAQ_6010 0x6010
-+#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc
-+#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32
-+#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34
-+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
-+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI 0xae43
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100I 0xb011
-+#define PCI_DEVICE_ID_COMPAQ_CISS 0xb060
-+#define PCI_DEVICE_ID_COMPAQ_CISSB 0xb178
-+#define PCI_DEVICE_ID_COMPAQ_CISSC 0x46
-+#define PCI_DEVICE_ID_COMPAQ_THUNDER 0xf130
-+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B 0xf150
-+
-+#define PCI_VENDOR_ID_NCR 0x1000
-+#define PCI_VENDOR_ID_LSI_LOGIC 0x1000
-+#define PCI_DEVICE_ID_NCR_53C810 0x0001
-+#define PCI_DEVICE_ID_NCR_53C820 0x0002
-+#define PCI_DEVICE_ID_NCR_53C825 0x0003
-+#define PCI_DEVICE_ID_NCR_53C815 0x0004
-+#define PCI_DEVICE_ID_LSI_53C810AP 0x0005
-+#define PCI_DEVICE_ID_NCR_53C860 0x0006
-+#define PCI_DEVICE_ID_LSI_53C1510 0x000a
-+#define PCI_DEVICE_ID_NCR_53C896 0x000b
-+#define PCI_DEVICE_ID_NCR_53C895 0x000c
-+#define PCI_DEVICE_ID_NCR_53C885 0x000d
-+#define PCI_DEVICE_ID_NCR_53C875 0x000f
-+#define PCI_DEVICE_ID_NCR_53C1510 0x0010
-+#define PCI_DEVICE_ID_LSI_53C895A 0x0012
-+#define PCI_DEVICE_ID_LSI_53C875A 0x0013
-+#define PCI_DEVICE_ID_LSI_53C1010_33 0x0020
-+#define PCI_DEVICE_ID_LSI_53C1010_66 0x0021
-+#define PCI_DEVICE_ID_LSI_53C1030 0x0030
-+#define PCI_DEVICE_ID_LSI_1030_53C1035 0x0032
-+#define PCI_DEVICE_ID_LSI_53C1035 0x0040
-+#define PCI_DEVICE_ID_NCR_53C875J 0x008f
-+#define PCI_DEVICE_ID_LSI_FC909 0x0621
-+#define PCI_DEVICE_ID_LSI_FC929 0x0622
-+#define PCI_DEVICE_ID_LSI_FC929_LAN 0x0623
-+#define PCI_DEVICE_ID_LSI_FC919 0x0624
-+#define PCI_DEVICE_ID_LSI_FC919_LAN 0x0625
-+#define PCI_DEVICE_ID_LSI_FC929X 0x0626
-+#define PCI_DEVICE_ID_LSI_FC939X 0x0642
-+#define PCI_DEVICE_ID_LSI_FC949X 0x0640
-+#define PCI_DEVICE_ID_LSI_FC919X 0x0628
-+#define PCI_DEVICE_ID_NCR_YELLOWFIN 0x0701
-+#define PCI_DEVICE_ID_LSI_61C102 0x0901
-+#define PCI_DEVICE_ID_LSI_63C815 0x1000
-+#define PCI_DEVICE_ID_LSI_SAS1064 0x0050
-+#define PCI_DEVICE_ID_LSI_SAS1066 0x005E
-+#define PCI_DEVICE_ID_LSI_SAS1068 0x0054
-+#define PCI_DEVICE_ID_LSI_SAS1064A 0x005C
-+#define PCI_DEVICE_ID_LSI_SAS1064E 0x0056
-+#define PCI_DEVICE_ID_LSI_SAS1066E 0x005A
-+#define PCI_DEVICE_ID_LSI_SAS1068E 0x0058
-+#define PCI_DEVICE_ID_LSI_SAS1078 0x0060
-+
-+#define PCI_VENDOR_ID_ATI 0x1002
-+/* Mach64 */
-+#define PCI_DEVICE_ID_ATI_68800 0x4158
-+#define PCI_DEVICE_ID_ATI_215CT222 0x4354
-+#define PCI_DEVICE_ID_ATI_210888CX 0x4358
-+#define PCI_DEVICE_ID_ATI_215ET222 0x4554
-+/* Mach64 / Rage */
-+#define PCI_DEVICE_ID_ATI_215GB 0x4742
-+#define PCI_DEVICE_ID_ATI_215GD 0x4744
-+#define PCI_DEVICE_ID_ATI_215GI 0x4749
-+#define PCI_DEVICE_ID_ATI_215GP 0x4750
-+#define PCI_DEVICE_ID_ATI_215GQ 0x4751
-+#define PCI_DEVICE_ID_ATI_215XL 0x4752
-+#define PCI_DEVICE_ID_ATI_215GT 0x4754
-+#define PCI_DEVICE_ID_ATI_215GTB 0x4755
-+#define PCI_DEVICE_ID_ATI_215_IV 0x4756
-+#define PCI_DEVICE_ID_ATI_215_IW 0x4757
-+#define PCI_DEVICE_ID_ATI_215_IZ 0x475A
-+#define PCI_DEVICE_ID_ATI_210888GX 0x4758
-+#define PCI_DEVICE_ID_ATI_215_LB 0x4c42
-+#define PCI_DEVICE_ID_ATI_215_LD 0x4c44
-+#define PCI_DEVICE_ID_ATI_215_LG 0x4c47
-+#define PCI_DEVICE_ID_ATI_215_LI 0x4c49
-+#define PCI_DEVICE_ID_ATI_215_LM 0x4c4D
-+#define PCI_DEVICE_ID_ATI_215_LN 0x4c4E
-+#define PCI_DEVICE_ID_ATI_215_LR 0x4c52
-+#define PCI_DEVICE_ID_ATI_215_LS 0x4c53
-+#define PCI_DEVICE_ID_ATI_264_LT 0x4c54
-+/* Mach64 VT */
-+#define PCI_DEVICE_ID_ATI_264VT 0x5654
-+#define PCI_DEVICE_ID_ATI_264VU 0x5655
-+#define PCI_DEVICE_ID_ATI_264VV 0x5656
-+/* Rage128 GL */
-+#define PCI_DEVICE_ID_ATI_RAGE128_RE 0x5245
-+#define PCI_DEVICE_ID_ATI_RAGE128_RF 0x5246
-+#define PCI_DEVICE_ID_ATI_RAGE128_RG 0x5247
-+/* Rage128 VR */
-+#define PCI_DEVICE_ID_ATI_RAGE128_RK 0x524b
-+#define PCI_DEVICE_ID_ATI_RAGE128_RL 0x524c
-+#define PCI_DEVICE_ID_ATI_RAGE128_SE 0x5345
-+#define PCI_DEVICE_ID_ATI_RAGE128_SF 0x5346
-+#define PCI_DEVICE_ID_ATI_RAGE128_SG 0x5347
-+#define PCI_DEVICE_ID_ATI_RAGE128_SH 0x5348
-+#define PCI_DEVICE_ID_ATI_RAGE128_SK 0x534b
-+#define PCI_DEVICE_ID_ATI_RAGE128_SL 0x534c
-+#define PCI_DEVICE_ID_ATI_RAGE128_SM 0x534d
-+#define PCI_DEVICE_ID_ATI_RAGE128_SN 0x534e
-+/* Rage128 Ultra */
-+#define PCI_DEVICE_ID_ATI_RAGE128_TF 0x5446
-+#define PCI_DEVICE_ID_ATI_RAGE128_TL 0x544c
-+#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452
-+#define PCI_DEVICE_ID_ATI_RAGE128_TS 0x5453
-+#define PCI_DEVICE_ID_ATI_RAGE128_TT 0x5454
-+#define PCI_DEVICE_ID_ATI_RAGE128_TU 0x5455
-+/* Rage128 M3 */
-+#define PCI_DEVICE_ID_ATI_RAGE128_LE 0x4c45
-+#define PCI_DEVICE_ID_ATI_RAGE128_LF 0x4c46
-+/* Rage128 M4 */
-+#define PCI_DEVICE_ID_ATI_RAGE128_MF 0x4d46
-+#define PCI_DEVICE_ID_ATI_RAGE128_ML 0x4d4c
-+/* Rage128 Pro GL */
-+#define PCI_DEVICE_ID_ATI_RAGE128_PA 0x5041
-+#define PCI_DEVICE_ID_ATI_RAGE128_PB 0x5042
-+#define PCI_DEVICE_ID_ATI_RAGE128_PC 0x5043
-+#define PCI_DEVICE_ID_ATI_RAGE128_PD 0x5044
-+#define PCI_DEVICE_ID_ATI_RAGE128_PE 0x5045
-+#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046
-+/* Rage128 Pro VR */
-+#define PCI_DEVICE_ID_ATI_RAGE128_PG 0x5047
-+#define PCI_DEVICE_ID_ATI_RAGE128_PH 0x5048
-+#define PCI_DEVICE_ID_ATI_RAGE128_PI 0x5049
-+#define PCI_DEVICE_ID_ATI_RAGE128_PJ 0x504A
-+#define PCI_DEVICE_ID_ATI_RAGE128_PK 0x504B
-+#define PCI_DEVICE_ID_ATI_RAGE128_PL 0x504C
-+#define PCI_DEVICE_ID_ATI_RAGE128_PM 0x504D
-+#define PCI_DEVICE_ID_ATI_RAGE128_PN 0x504E
-+#define PCI_DEVICE_ID_ATI_RAGE128_PO 0x504F
-+#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050
-+#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051
-+#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052
-+#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452
-+#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053
-+#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054
-+#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055
-+#define PCI_DEVICE_ID_ATI_RAGE128_PV 0x5056
-+#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057
-+#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058
-+/* Rage128 M4 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LE 0x4d45
-+#define PCI_DEVICE_ID_ATI_RADEON_LF 0x4d46
-+/* Radeon R100 */
-+#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144
-+#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145
-+#define PCI_DEVICE_ID_ATI_RADEON_QF 0x5146
-+#define PCI_DEVICE_ID_ATI_RADEON_QG 0x5147
-+/* Radeon RV100 (VE) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159
-+#define PCI_DEVICE_ID_ATI_RADEON_QZ 0x515a
-+/* Radeon R200 (8500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QL 0x514c
-+#define PCI_DEVICE_ID_ATI_RADEON_QN 0x514e
-+#define PCI_DEVICE_ID_ATI_RADEON_QO 0x514f
-+#define PCI_DEVICE_ID_ATI_RADEON_Ql 0x516c
-+#define PCI_DEVICE_ID_ATI_RADEON_BB 0x4242
-+/* Radeon R200 (9100) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QM 0x514d
-+/* Radeon RV200 (7500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157
-+#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158
-+/* Radeon NV-100 */
-+#define PCI_DEVICE_ID_ATI_RADEON_N1 0x5159
-+#define PCI_DEVICE_ID_ATI_RADEON_N2 0x515a
-+/* Radeon RV250 (9000) */
-+#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964
-+#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965
-+#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966
-+#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967
-+/* Radeon RV280 (9200) */
-+#define PCI_DEVICE_ID_ATI_RADEON_Y_ 0x5960
-+#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961
-+#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964
-+/* Radeon R300 (9500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_AD 0x4144
-+/* Radeon R300 (9700) */
-+#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44
-+#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45
-+#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46
-+#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47
-+#define PCI_DEVICE_ID_ATI_RADEON_AE 0x4145
-+#define PCI_DEVICE_ID_ATI_RADEON_AF 0x4146
-+/* Radeon R350 (9800) */
-+#define PCI_DEVICE_ID_ATI_RADEON_NH 0x4e48
-+#define PCI_DEVICE_ID_ATI_RADEON_NI 0x4e49
-+/* Radeon RV350 (9600) */
-+#define PCI_DEVICE_ID_ATI_RADEON_AP 0x4150
-+#define PCI_DEVICE_ID_ATI_RADEON_AR 0x4152
-+/* Radeon M6 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59
-+#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a
-+/* Radeon M7 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LW 0x4c57
-+#define PCI_DEVICE_ID_ATI_RADEON_LX 0x4c58
-+/* Radeon M9 */
-+#define PCI_DEVICE_ID_ATI_RADEON_Ld 0x4c64
-+#define PCI_DEVICE_ID_ATI_RADEON_Le 0x4c65
-+#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66
-+#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67
-+/* Radeon */
-+#define PCI_DEVICE_ID_ATI_RADEON_RA 0x5144
-+#define PCI_DEVICE_ID_ATI_RADEON_RB 0x5145
-+#define PCI_DEVICE_ID_ATI_RADEON_RC 0x5146
-+#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147
-+/* RadeonIGP */
-+#define PCI_DEVICE_ID_ATI_RS100 0xcab0
-+#define PCI_DEVICE_ID_ATI_RS200 0xcab2
-+#define PCI_DEVICE_ID_ATI_RS200_B 0xcbb2
-+#define PCI_DEVICE_ID_ATI_RS250 0xcab3
-+#define PCI_DEVICE_ID_ATI_RS300_100 0x5830
-+#define PCI_DEVICE_ID_ATI_RS300_133 0x5831
-+#define PCI_DEVICE_ID_ATI_RS300_166 0x5832
-+#define PCI_DEVICE_ID_ATI_RS300_200 0x5833
-+#define PCI_DEVICE_ID_ATI_RS350_100 0x7830
-+#define PCI_DEVICE_ID_ATI_RS350_133 0x7831
-+#define PCI_DEVICE_ID_ATI_RS350_166 0x7832
-+#define PCI_DEVICE_ID_ATI_RS350_200 0x7833
-+#define PCI_DEVICE_ID_ATI_RS400_100 0x5a30
-+#define PCI_DEVICE_ID_ATI_RS400_133 0x5a31
-+#define PCI_DEVICE_ID_ATI_RS400_166 0x5a32
-+#define PCI_DEVICE_ID_ATI_RS400_200 0x5a33
-+#define PCI_DEVICE_ID_ATI_RS480 0x5950
-+/* ATI IXP Chipset */
-+#define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349
-+#define PCI_DEVICE_ID_ATI_IXP300_IDE 0x4369
-+#define PCI_DEVICE_ID_ATI_IXP300_SATA 0x436e
-+#define PCI_DEVICE_ID_ATI_IXP400_IDE 0x4376
-+#define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379
-+
-+#define PCI_VENDOR_ID_VLSI 0x1004
-+#define PCI_DEVICE_ID_VLSI_82C592 0x0005
-+#define PCI_DEVICE_ID_VLSI_82C593 0x0006
-+#define PCI_DEVICE_ID_VLSI_82C594 0x0007
-+#define PCI_DEVICE_ID_VLSI_82C597 0x0009
-+#define PCI_DEVICE_ID_VLSI_82C541 0x000c
-+#define PCI_DEVICE_ID_VLSI_82C543 0x000d
-+#define PCI_DEVICE_ID_VLSI_82C532 0x0101
-+#define PCI_DEVICE_ID_VLSI_82C534 0x0102
-+#define PCI_DEVICE_ID_VLSI_82C535 0x0104
-+#define PCI_DEVICE_ID_VLSI_82C147 0x0105
-+#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702
-+
-+#define PCI_VENDOR_ID_ADL 0x1005
-+#define PCI_DEVICE_ID_ADL_2301 0x2301
-+
-+#define PCI_VENDOR_ID_NS 0x100b
-+#define PCI_DEVICE_ID_NS_87415 0x0002
-+#define PCI_DEVICE_ID_NS_87560_LIO 0x000e
-+#define PCI_DEVICE_ID_NS_87560_USB 0x0012
-+#define PCI_DEVICE_ID_NS_83815 0x0020
-+#define PCI_DEVICE_ID_NS_83820 0x0022
-+#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500
-+#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501
-+#define PCI_DEVICE_ID_NS_SCx200_IDE 0x0502
-+#define PCI_DEVICE_ID_NS_SCx200_AUDIO 0x0503
-+#define PCI_DEVICE_ID_NS_SCx200_VIDEO 0x0504
-+#define PCI_DEVICE_ID_NS_SCx200_XBUS 0x0505
-+#define PCI_DEVICE_ID_NS_SC1100_BRIDGE 0x0510
-+#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511
-+#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515
-+#define PCI_DEVICE_ID_NS_87410 0xd001
-+
-+#define PCI_VENDOR_ID_TSENG 0x100c
-+#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202
-+#define PCI_DEVICE_ID_TSENG_W32P_b 0x3205
-+#define PCI_DEVICE_ID_TSENG_W32P_c 0x3206
-+#define PCI_DEVICE_ID_TSENG_W32P_d 0x3207
-+#define PCI_DEVICE_ID_TSENG_ET6000 0x3208
-+
-+#define PCI_VENDOR_ID_WEITEK 0x100e
-+#define PCI_DEVICE_ID_WEITEK_P9000 0x9001
-+#define PCI_DEVICE_ID_WEITEK_P9100 0x9100
-+
-+#define PCI_VENDOR_ID_DEC 0x1011
-+#define PCI_DEVICE_ID_DEC_BRD 0x0001
-+#define PCI_DEVICE_ID_DEC_TULIP 0x0002
-+#define PCI_DEVICE_ID_DEC_TGA 0x0004
-+#define PCI_DEVICE_ID_DEC_TULIP_FAST 0x0009
-+#define PCI_DEVICE_ID_DEC_TGA2 0x000D
-+#define PCI_DEVICE_ID_DEC_FDDI 0x000F
-+#define PCI_DEVICE_ID_DEC_TULIP_PLUS 0x0014
-+#define PCI_DEVICE_ID_DEC_21142 0x0019
-+#define PCI_DEVICE_ID_DEC_21052 0x0021
-+#define PCI_DEVICE_ID_DEC_21150 0x0022
-+#define PCI_DEVICE_ID_DEC_21152 0x0024
-+#define PCI_DEVICE_ID_DEC_21153 0x0025
-+#define PCI_DEVICE_ID_DEC_21154 0x0026
-+#define PCI_DEVICE_ID_DEC_21285 0x1065
-+#define PCI_DEVICE_ID_COMPAQ_42XX 0x0046
-+
-+#define PCI_VENDOR_ID_CIRRUS 0x1013
-+#define PCI_DEVICE_ID_CIRRUS_7548 0x0038
-+#define PCI_DEVICE_ID_CIRRUS_5430 0x00a0
-+#define PCI_DEVICE_ID_CIRRUS_5434_4 0x00a4
-+#define PCI_DEVICE_ID_CIRRUS_5434_8 0x00a8
-+#define PCI_DEVICE_ID_CIRRUS_5436 0x00ac
-+#define PCI_DEVICE_ID_CIRRUS_5446 0x00b8
-+#define PCI_DEVICE_ID_CIRRUS_5480 0x00bc
-+#define PCI_DEVICE_ID_CIRRUS_5462 0x00d0
-+#define PCI_DEVICE_ID_CIRRUS_5464 0x00d4
-+#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6
-+#define PCI_DEVICE_ID_CIRRUS_6729 0x1100
-+#define PCI_DEVICE_ID_CIRRUS_6832 0x1110
-+#define PCI_DEVICE_ID_CIRRUS_7542 0x1200
-+#define PCI_DEVICE_ID_CIRRUS_7543 0x1202
-+#define PCI_DEVICE_ID_CIRRUS_7541 0x1204
-+
-+#define PCI_VENDOR_ID_IBM 0x1014
-+#define PCI_DEVICE_ID_IBM_FIRE_CORAL 0x000a
-+#define PCI_DEVICE_ID_IBM_TR 0x0018
-+#define PCI_DEVICE_ID_IBM_82G2675 0x001d
-+#define PCI_DEVICE_ID_IBM_MCA 0x0020
-+#define PCI_DEVICE_ID_IBM_82351 0x0022
-+#define PCI_DEVICE_ID_IBM_PYTHON 0x002d
-+#define PCI_DEVICE_ID_IBM_SERVERAID 0x002e
-+#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e
-+#define PCI_DEVICE_ID_IBM_MPIC 0x0046
-+#define PCI_DEVICE_ID_IBM_3780IDSP 0x007d
-+#define PCI_DEVICE_ID_IBM_CHUKAR 0x0096
-+#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc
-+#define PCI_DEVICE_ID_IBM_CPC710_PCI32 0x0105
-+#define PCI_DEVICE_ID_IBM_405GP 0x0156
-+#define PCI_DEVICE_ID_IBM_SNIPE 0x0180
-+#define PCI_DEVICE_ID_IBM_SERVERAIDI960 0x01bd
-+#define PCI_DEVICE_ID_IBM_CITRINE 0x028C
-+#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166
-+#define PCI_DEVICE_ID_IBM_MPIC_2 0xffff
-+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031
-+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219
-+#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A
-+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251
-+#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252
-+
-+#define PCI_VENDOR_ID_COMPEX2 0x101a // pci.ids says "AT&T GIS (NCR)"
-+#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005
-+
-+#define PCI_VENDOR_ID_WD 0x101c
-+#define PCI_DEVICE_ID_WD_7197 0x3296
-+#define PCI_DEVICE_ID_WD_90C 0xc24a
-+
-+#define PCI_VENDOR_ID_AMI 0x101e
-+#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960
-+#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010
-+#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060
-+
-+#define PCI_VENDOR_ID_AMD 0x1022
-+#define PCI_DEVICE_ID_AMD_LANCE 0x2000
-+#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
-+#define PCI_DEVICE_ID_AMD_SCSI 0x2020
-+#define PCI_DEVICE_ID_AMD_SERENADE 0x36c0
-+#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006
-+#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700D 0x700D
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700F 0x700F
-+#define PCI_DEVICE_ID_AMD_COBRA_7400 0x7400
-+#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401
-+#define PCI_DEVICE_ID_AMD_COBRA_7403 0x7403
-+#define PCI_DEVICE_ID_AMD_COBRA_7404 0x7404
-+#define PCI_DEVICE_ID_AMD_VIPER_7408 0x7408
-+#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409
-+#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B
-+#define PCI_DEVICE_ID_AMD_VIPER_740C 0x740C
-+#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410
-+#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411
-+#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413
-+#define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414
-+#define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440
-+# define PCI_DEVICE_ID_AMD_VIPER_7440 PCI_DEVICE_ID_AMD_OPUS_7440
-+#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441
-+# define PCI_DEVICE_ID_AMD_VIPER_7441 PCI_DEVICE_ID_AMD_OPUS_7441
-+#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443
-+# define PCI_DEVICE_ID_AMD_VIPER_7443 PCI_DEVICE_ID_AMD_OPUS_7443
-+#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445
-+#define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448
-+# define PCI_DEVICE_ID_AMD_VIPER_7448 PCI_DEVICE_ID_AMD_OPUS_7448
-+#define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449
-+# define PCI_DEVICE_ID_AMD_VIPER_7449 PCI_DEVICE_ID_AMD_OPUS_7449
-+#define PCI_DEVICE_ID_AMD_8111_LAN 0x7462
-+#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468
-+#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469
-+#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a
-+#define PCI_DEVICE_ID_AMD_8111_SMBUS 0x746b
-+#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d
-+#define PCI_DEVICE_ID_AMD_8151_0 0x7454
-+#define PCI_DEVICE_ID_AMD_8131_APIC 0x7450
-+
-+#define PCI_VENDOR_ID_TRIDENT 0x1023
-+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
-+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001
-+#define PCI_DEVICE_ID_TRIDENT_9320 0x9320
-+#define PCI_DEVICE_ID_TRIDENT_9388 0x9388
-+#define PCI_DEVICE_ID_TRIDENT_9397 0x9397
-+#define PCI_DEVICE_ID_TRIDENT_939A 0x939A
-+#define PCI_DEVICE_ID_TRIDENT_9520 0x9520
-+#define PCI_DEVICE_ID_TRIDENT_9525 0x9525
-+#define PCI_DEVICE_ID_TRIDENT_9420 0x9420
-+#define PCI_DEVICE_ID_TRIDENT_9440 0x9440
-+#define PCI_DEVICE_ID_TRIDENT_9660 0x9660
-+#define PCI_DEVICE_ID_TRIDENT_9750 0x9750
-+#define PCI_DEVICE_ID_TRIDENT_9850 0x9850
-+#define PCI_DEVICE_ID_TRIDENT_9880 0x9880
-+#define PCI_DEVICE_ID_TRIDENT_8400 0x8400
-+#define PCI_DEVICE_ID_TRIDENT_8420 0x8420
-+#define PCI_DEVICE_ID_TRIDENT_8500 0x8500
-+
-+#define PCI_VENDOR_ID_AI 0x1025
-+#define PCI_DEVICE_ID_AI_M1435 0x1435
-+
-+#define PCI_VENDOR_ID_DELL 0x1028
-+#define PCI_DEVICE_ID_DELL_RACIII 0x0008
-+#define PCI_DEVICE_ID_DELL_RAC4 0x0012
-+
-+#define PCI_VENDOR_ID_MATROX 0x102B
-+#define PCI_DEVICE_ID_MATROX_MGA_2 0x0518
-+#define PCI_DEVICE_ID_MATROX_MIL 0x0519
-+#define PCI_DEVICE_ID_MATROX_MYS 0x051A
-+#define PCI_DEVICE_ID_MATROX_MIL_2 0x051b
-+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP 0x051f
-+#define PCI_DEVICE_ID_MATROX_MGA_IMP 0x0d10
-+#define PCI_DEVICE_ID_MATROX_G100_MM 0x1000
-+#define PCI_DEVICE_ID_MATROX_G100_AGP 0x1001
-+#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520
-+#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521
-+#define PCI_DEVICE_ID_MATROX_G400 0x0525
-+#define PCI_DEVICE_ID_MATROX_G550 0x2527
-+#define PCI_DEVICE_ID_MATROX_VIA 0x4536
-+
-+#define PCI_VENDOR_ID_CT 0x102c
-+#define PCI_DEVICE_ID_CT_69000 0x00c0
-+#define PCI_DEVICE_ID_CT_65545 0x00d8
-+#define PCI_DEVICE_ID_CT_65548 0x00dc
-+#define PCI_DEVICE_ID_CT_65550 0x00e0
-+#define PCI_DEVICE_ID_CT_65554 0x00e4
-+#define PCI_DEVICE_ID_CT_65555 0x00e5
-+
-+#define PCI_VENDOR_ID_MIRO 0x1031
-+#define PCI_DEVICE_ID_MIRO_36050 0x5601
-+#define PCI_DEVICE_ID_MIRO_DC10PLUS 0x7efe
-+#define PCI_DEVICE_ID_MIRO_DC30PLUS 0xd801
-+
-+#define PCI_VENDOR_ID_NEC 0x1033
-+#define PCI_DEVICE_ID_NEC_CBUS_1 0x0001 /* PCI-Cbus Bridge */
-+#define PCI_DEVICE_ID_NEC_LOCAL 0x0002 /* Local Bridge */
-+#define PCI_DEVICE_ID_NEC_ATM 0x0003 /* ATM LAN Controller */
-+#define PCI_DEVICE_ID_NEC_R4000 0x0004 /* R4000 Bridge */
-+#define PCI_DEVICE_ID_NEC_486 0x0005 /* 486 Like Peripheral Bus Bridge */
-+#define PCI_DEVICE_ID_NEC_ACCEL_1 0x0006 /* Graphic Accelerator */
-+#define PCI_DEVICE_ID_NEC_UXBUS 0x0007 /* UX-Bus Bridge */
-+#define PCI_DEVICE_ID_NEC_ACCEL_2 0x0008 /* Graphic Accelerator */
-+#define PCI_DEVICE_ID_NEC_GRAPH 0x0009 /* PCI-CoreGraph Bridge */
-+#define PCI_DEVICE_ID_NEC_VL 0x0016 /* PCI-VL Bridge */
-+#define PCI_DEVICE_ID_NEC_STARALPHA2 0x002c /* STAR ALPHA2 */
-+#define PCI_DEVICE_ID_NEC_CBUS_2 0x002d /* PCI-Cbus Bridge */
-+#define PCI_DEVICE_ID_NEC_USB 0x0035 /* PCI-USB Host */
-+#define PCI_DEVICE_ID_NEC_CBUS_3 0x003b
-+#define PCI_DEVICE_ID_NEC_NAPCCARD 0x003e
-+#define PCI_DEVICE_ID_NEC_PCX2 0x0046 /* PowerVR */
-+#define PCI_DEVICE_ID_NEC_NILE4 0x005a
-+#define PCI_DEVICE_ID_NEC_VRC5476 0x009b
-+#define PCI_DEVICE_ID_NEC_VRC4173 0x00a5
-+#define PCI_DEVICE_ID_NEC_VRC5477_AC97 0x00a6
-+#define PCI_DEVICE_ID_NEC_PC9821CS01 0x800c /* PC-9821-CS01 */
-+#define PCI_DEVICE_ID_NEC_PC9821NRB06 0x800d /* PC-9821NR-B06 */
-+
-+#define PCI_VENDOR_ID_FD 0x1036
-+#define PCI_DEVICE_ID_FD_36C70 0x0000
-+
-+#define PCI_VENDOR_ID_SI 0x1039
-+#define PCI_DEVICE_ID_SI_5591_AGP 0x0001
-+#define PCI_DEVICE_ID_SI_6202 0x0002
-+#define PCI_DEVICE_ID_SI_503 0x0008
-+#define PCI_DEVICE_ID_SI_ACPI 0x0009
-+#define PCI_DEVICE_ID_SI_SMBUS 0x0016
-+#define PCI_DEVICE_ID_SI_LPC 0x0018
-+#define PCI_DEVICE_ID_SI_5597_VGA 0x0200
-+#define PCI_DEVICE_ID_SI_6205 0x0205
-+#define PCI_DEVICE_ID_SI_501 0x0406
-+#define PCI_DEVICE_ID_SI_496 0x0496
-+#define PCI_DEVICE_ID_SI_300 0x0300
-+#define PCI_DEVICE_ID_SI_315H 0x0310
-+#define PCI_DEVICE_ID_SI_315 0x0315
-+#define PCI_DEVICE_ID_SI_315PRO 0x0325
-+#define PCI_DEVICE_ID_SI_530 0x0530
-+#define PCI_DEVICE_ID_SI_540 0x0540
-+#define PCI_DEVICE_ID_SI_550 0x0550
-+#define PCI_DEVICE_ID_SI_540_VGA 0x5300
-+#define PCI_DEVICE_ID_SI_550_VGA 0x5315
-+#define PCI_DEVICE_ID_SI_601 0x0601
-+#define PCI_DEVICE_ID_SI_620 0x0620
-+#define PCI_DEVICE_ID_SI_630 0x0630
-+#define PCI_DEVICE_ID_SI_633 0x0633
-+#define PCI_DEVICE_ID_SI_635 0x0635
-+#define PCI_DEVICE_ID_SI_640 0x0640
-+#define PCI_DEVICE_ID_SI_645 0x0645
-+#define PCI_DEVICE_ID_SI_646 0x0646
-+#define PCI_DEVICE_ID_SI_648 0x0648
-+#define PCI_DEVICE_ID_SI_650 0x0650
-+#define PCI_DEVICE_ID_SI_651 0x0651
-+#define PCI_DEVICE_ID_SI_652 0x0652
-+#define PCI_DEVICE_ID_SI_655 0x0655
-+#define PCI_DEVICE_ID_SI_661 0x0661
-+#define PCI_DEVICE_ID_SI_730 0x0730
-+#define PCI_DEVICE_ID_SI_733 0x0733
-+#define PCI_DEVICE_ID_SI_630_VGA 0x6300
-+#define PCI_DEVICE_ID_SI_730_VGA 0x7300
-+#define PCI_DEVICE_ID_SI_735 0x0735
-+#define PCI_DEVICE_ID_SI_740 0x0740
-+#define PCI_DEVICE_ID_SI_741 0x0741
-+#define PCI_DEVICE_ID_SI_745 0x0745
-+#define PCI_DEVICE_ID_SI_746 0x0746
-+#define PCI_DEVICE_ID_SI_748 0x0748
-+#define PCI_DEVICE_ID_SI_750 0x0750
-+#define PCI_DEVICE_ID_SI_751 0x0751
-+#define PCI_DEVICE_ID_SI_752 0x0752
-+#define PCI_DEVICE_ID_SI_755 0x0755
-+#define PCI_DEVICE_ID_SI_760 0x0760
-+#define PCI_DEVICE_ID_SI_900 0x0900
-+#define PCI_DEVICE_ID_SI_961 0x0961
-+#define PCI_DEVICE_ID_SI_962 0x0962
-+#define PCI_DEVICE_ID_SI_963 0x0963
-+#define PCI_DEVICE_ID_SI_5107 0x5107
-+#define PCI_DEVICE_ID_SI_5300 0x5300
-+#define PCI_DEVICE_ID_SI_5511 0x5511
-+#define PCI_DEVICE_ID_SI_5513 0x5513
-+#define PCI_DEVICE_ID_SI_5518 0x5518
-+#define PCI_DEVICE_ID_SI_5571 0x5571
-+#define PCI_DEVICE_ID_SI_5581 0x5581
-+#define PCI_DEVICE_ID_SI_5582 0x5582
-+#define PCI_DEVICE_ID_SI_5591 0x5591
-+#define PCI_DEVICE_ID_SI_5596 0x5596
-+#define PCI_DEVICE_ID_SI_5597 0x5597
-+#define PCI_DEVICE_ID_SI_5598 0x5598
-+#define PCI_DEVICE_ID_SI_5600 0x5600
-+#define PCI_DEVICE_ID_SI_6300 0x6300
-+#define PCI_DEVICE_ID_SI_6306 0x6306
-+#define PCI_DEVICE_ID_SI_6326 0x6326
-+#define PCI_DEVICE_ID_SI_7001 0x7001
-+#define PCI_DEVICE_ID_SI_7012 0x7012
-+#define PCI_DEVICE_ID_SI_7016 0x7016
-+
-+#define PCI_VENDOR_ID_HP 0x103c
-+#define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX2 0x100a
-+#define PCI_DEVICE_ID_HP_TACHYON 0x1028
-+#define PCI_DEVICE_ID_HP_TACHLITE 0x1029
-+#define PCI_DEVICE_ID_HP_J2585A 0x1030
-+#define PCI_DEVICE_ID_HP_J2585B 0x1031
-+#define PCI_DEVICE_ID_HP_J2973A 0x1040
-+#define PCI_DEVICE_ID_HP_J2970A 0x1042
-+#define PCI_DEVICE_ID_HP_DIVA 0x1048
-+#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049
-+#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A
-+#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B
-+#define PCI_DEVICE_ID_HP_PCI_LBA 0x1054
-+#define PCI_DEVICE_ID_HP_REO_SBA 0x10f0
-+#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b
-+#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223
-+#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226
-+#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227
-+#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229
-+#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a
-+#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e
-+#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c
-+#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282
-+#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290
-+#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301
-+#define PCI_DEVICE_ID_HP_CISSA 0x3220
-+#define PCI_DEVICE_ID_HP_CISSB 0x3230
-+#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
-+
-+#define PCI_VENDOR_ID_PCTECH 0x1042
-+#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000
-+#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_0 0x3000
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_1 0x3010
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
-+
-+#define PCI_VENDOR_ID_ASUSTEK 0x1043
-+#define PCI_DEVICE_ID_ASUSTEK_0675 0x0675
-+
-+#define PCI_VENDOR_ID_DPT 0x1044
-+#define PCI_DEVICE_ID_DPT 0xa400
-+
-+#define PCI_VENDOR_ID_OPTI 0x1045
-+#define PCI_DEVICE_ID_OPTI_92C178 0xc178
-+#define PCI_DEVICE_ID_OPTI_82C557 0xc557
-+#define PCI_DEVICE_ID_OPTI_82C558 0xc558
-+#define PCI_DEVICE_ID_OPTI_82C621 0xc621
-+#define PCI_DEVICE_ID_OPTI_82C700 0xc700
-+#define PCI_DEVICE_ID_OPTI_82C701 0xc701
-+#define PCI_DEVICE_ID_OPTI_82C814 0xc814
-+#define PCI_DEVICE_ID_OPTI_82C822 0xc822
-+#define PCI_DEVICE_ID_OPTI_82C861 0xc861
-+#define PCI_DEVICE_ID_OPTI_82C825 0xd568
-+
-+#define PCI_VENDOR_ID_ELSA 0x1048
-+#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000
-+#define PCI_DEVICE_ID_ELSA_QS3000 0x3000
-+
-+#define PCI_VENDOR_ID_SGS 0x104a
-+#define PCI_DEVICE_ID_SGS_2000 0x0008
-+#define PCI_DEVICE_ID_SGS_1764 0x0009
-+
-+#define PCI_VENDOR_ID_BUSLOGIC 0x104B
-+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
-+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040
-+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130
-+
-+#define PCI_VENDOR_ID_TI 0x104c
-+#define PCI_DEVICE_ID_TI_TVP4010 0x3d04
-+#define PCI_DEVICE_ID_TI_TVP4020 0x3d07
-+#define PCI_DEVICE_ID_TI_4450 0x8011
-+#define PCI_DEVICE_ID_TI_1130 0xac12
-+#define PCI_DEVICE_ID_TI_1031 0xac13
-+#define PCI_DEVICE_ID_TI_1131 0xac15
-+#define PCI_DEVICE_ID_TI_1250 0xac16
-+#define PCI_DEVICE_ID_TI_1220 0xac17
-+#define PCI_DEVICE_ID_TI_1221 0xac19
-+#define PCI_DEVICE_ID_TI_1210 0xac1a
-+#define PCI_DEVICE_ID_TI_1450 0xac1b
-+#define PCI_DEVICE_ID_TI_1225 0xac1c
-+#define PCI_DEVICE_ID_TI_1251A 0xac1d
-+#define PCI_DEVICE_ID_TI_1211 0xac1e
-+#define PCI_DEVICE_ID_TI_1251B 0xac1f
-+#define PCI_DEVICE_ID_TI_4410 0xac41
-+#define PCI_DEVICE_ID_TI_4451 0xac42
-+#define PCI_DEVICE_ID_TI_4510 0xac44
-+#define PCI_DEVICE_ID_TI_4520 0xac46
-+#define PCI_DEVICE_ID_TI_1410 0xac50
-+#define PCI_DEVICE_ID_TI_1420 0xac51
-+#define PCI_DEVICE_ID_TI_1451A 0xac52
-+#define PCI_DEVICE_ID_TI_1620 0xac54
-+#define PCI_DEVICE_ID_TI_1520 0xac55
-+#define PCI_DEVICE_ID_TI_1510 0xac56
-+
-+#define PCI_VENDOR_ID_SONY 0x104d
-+#define PCI_DEVICE_ID_SONY_CXD3222 0x8039
-+
-+#define PCI_VENDOR_ID_OAK 0x104e
-+#define PCI_DEVICE_ID_OAK_OTI107 0x0107
-+
-+/* Winbond have two vendor IDs! See 0x10ad as well */
-+#define PCI_VENDOR_ID_WINBOND2 0x1050
-+#define PCI_DEVICE_ID_WINBOND2_89C940 0x0940
-+#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a
-+#define PCI_DEVICE_ID_WINBOND2_6692 0x6692
-+
-+#define PCI_VENDOR_ID_ANIGMA 0x1051
-+#define PCI_DEVICE_ID_ANIGMA_MC145575 0x0100
-+
-+#define PCI_VENDOR_ID_EFAR 0x1055
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_2 0x9462
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463
-+
-+#define PCI_VENDOR_ID_MOTOROLA 0x1057
-+#define PCI_VENDOR_ID_MOTOROLA_OOPS 0x1507
-+#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001
-+#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002
-+#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004
-+#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801
-+#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802
-+#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803
-+#define PCI_DEVICE_ID_MOTOROLA_CPX8216 0x4806
-+#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b
-+#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803
-+
-+#define PCI_VENDOR_ID_PROMISE 0x105a
-+#define PCI_DEVICE_ID_PROMISE_20265 0x0d30
-+#define PCI_DEVICE_ID_PROMISE_20267 0x4d30
-+#define PCI_DEVICE_ID_PROMISE_20246 0x4d33
-+#define PCI_DEVICE_ID_PROMISE_20262 0x4d38
-+#define PCI_DEVICE_ID_PROMISE_20263 0x0D38
-+#define PCI_DEVICE_ID_PROMISE_20268 0x4d68
-+#define PCI_DEVICE_ID_PROMISE_20268R 0x6268
-+#define PCI_DEVICE_ID_PROMISE_20269 0x4d69
-+#define PCI_DEVICE_ID_PROMISE_20270 0x6268
-+#define PCI_DEVICE_ID_PROMISE_20271 0x6269
-+#define PCI_DEVICE_ID_PROMISE_20275 0x1275
-+#define PCI_DEVICE_ID_PROMISE_20276 0x5275
-+#define PCI_DEVICE_ID_PROMISE_20277 0x7275
-+#define PCI_DEVICE_ID_PROMISE_5300 0x5300
-+
-+#define PCI_VENDOR_ID_N9 0x105d
-+#define PCI_DEVICE_ID_N9_I128 0x2309
-+#define PCI_DEVICE_ID_N9_I128_2 0x2339
-+#define PCI_DEVICE_ID_N9_I128_T2R 0x493d
-+
-+#define PCI_VENDOR_ID_UMC 0x1060
-+#define PCI_DEVICE_ID_UMC_UM8673F 0x0101
-+#define PCI_DEVICE_ID_UMC_UM8891A 0x0891
-+#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
-+#define PCI_DEVICE_ID_UMC_UM8886A 0x886a
-+#define PCI_DEVICE_ID_UMC_UM8881F 0x8881
-+#define PCI_DEVICE_ID_UMC_UM8886F 0x8886
-+#define PCI_DEVICE_ID_UMC_UM9017F 0x9017
-+#define PCI_DEVICE_ID_UMC_UM8886N 0xe886
-+#define PCI_DEVICE_ID_UMC_UM8891N 0xe891
-+
-+#define PCI_VENDOR_ID_X 0x1061
-+#define PCI_DEVICE_ID_X_AGX016 0x0001
-+
-+#define PCI_VENDOR_ID_MYLEX 0x1069
-+#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001
-+#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002
-+#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010
-+#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020
-+#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050
-+#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56
-+#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166
-+
-+#define PCI_VENDOR_ID_PICOP 0x1066
-+#define PCI_DEVICE_ID_PICOP_PT86C52X 0x0001
-+#define PCI_DEVICE_ID_PICOP_PT80C524 0x8002
-+
-+#define PCI_VENDOR_ID_APPLE 0x106b
-+#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001
-+#define PCI_DEVICE_ID_APPLE_GC 0x0002
-+#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e
-+#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018
-+#define PCI_DEVICE_ID_APPLE_KL_USB 0x0019
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO 0x0022
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO_P 0x0025
-+#define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d
-+#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e
-+#define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032
-+#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034
-+#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO_I 0x003e
-+#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043
-+#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b
-+#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c
-+#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050
-+#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051
-+#define PCI_DEVICE_ID_APPLE_SH_FW 0x0052
-+#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058
-+#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059
-+#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645
-+
-+#define PCI_VENDOR_ID_YAMAHA 0x1073
-+#define PCI_DEVICE_ID_YAMAHA_724 0x0004
-+#define PCI_DEVICE_ID_YAMAHA_724F 0x000d
-+#define PCI_DEVICE_ID_YAMAHA_740 0x000a
-+#define PCI_DEVICE_ID_YAMAHA_740C 0x000c
-+#define PCI_DEVICE_ID_YAMAHA_744 0x0010
-+#define PCI_DEVICE_ID_YAMAHA_754 0x0012
-+
-+#define PCI_VENDOR_ID_NEXGEN 0x1074
-+#define PCI_DEVICE_ID_NEXGEN_82C501 0x4e78
-+
-+#define PCI_VENDOR_ID_QLOGIC 0x1077
-+#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020
-+#define PCI_DEVICE_ID_QLOGIC_ISP1022 0x1022
-+#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100
-+#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200
-+
-+#define PCI_VENDOR_ID_CYRIX 0x1078
-+#define PCI_DEVICE_ID_CYRIX_5510 0x0000
-+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001
-+#define PCI_DEVICE_ID_CYRIX_5520 0x0002
-+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100
-+#define PCI_DEVICE_ID_CYRIX_5530_SMI 0x0101
-+#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102
-+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103
-+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104
-+
-+#define PCI_VENDOR_ID_LEADTEK 0x107d
-+#define PCI_DEVICE_ID_LEADTEK_805 0x0000
-+
-+#define PCI_VENDOR_ID_INTERPHASE 0x107e
-+#define PCI_DEVICE_ID_INTERPHASE_5526 0x0004
-+#define PCI_DEVICE_ID_INTERPHASE_55x6 0x0005
-+#define PCI_DEVICE_ID_INTERPHASE_5575 0x0008
-+
-+#define PCI_VENDOR_ID_CONTAQ 0x1080
-+#define PCI_DEVICE_ID_CONTAQ_82C599 0x0600
-+#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693
-+
-+#define PCI_VENDOR_ID_FOREX 0x1083
-+
-+#define PCI_VENDOR_ID_OLICOM 0x108d
-+#define PCI_DEVICE_ID_OLICOM_OC3136 0x0001
-+#define PCI_DEVICE_ID_OLICOM_OC2315 0x0011
-+#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012
-+#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013
-+#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014
-+#define PCI_DEVICE_ID_OLICOM_OC6151 0x0021
-+
-+#define PCI_VENDOR_ID_SUN 0x108e
-+#define PCI_DEVICE_ID_SUN_EBUS 0x1000
-+#define PCI_DEVICE_ID_SUN_HAPPYMEAL 0x1001
-+#define PCI_DEVICE_ID_SUN_RIO_EBUS 0x1100
-+#define PCI_DEVICE_ID_SUN_RIO_GEM 0x1101
-+#define PCI_DEVICE_ID_SUN_RIO_1394 0x1102
-+#define PCI_DEVICE_ID_SUN_RIO_USB 0x1103
-+#define PCI_DEVICE_ID_SUN_GEM 0x2bad
-+#define PCI_DEVICE_ID_SUN_SIMBA 0x5000
-+#define PCI_DEVICE_ID_SUN_PBM 0x8000
-+#define PCI_DEVICE_ID_SUN_SCHIZO 0x8001
-+#define PCI_DEVICE_ID_SUN_SABRE 0xa000
-+#define PCI_DEVICE_ID_SUN_HUMMINGBIRD 0xa001
-+#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801
-+
-+#define PCI_VENDOR_ID_CMD 0x1095
-+#define PCI_DEVICE_ID_CMD_640 0x0640
-+#define PCI_DEVICE_ID_CMD_643 0x0643
-+#define PCI_DEVICE_ID_CMD_646 0x0646
-+#define PCI_DEVICE_ID_CMD_647 0x0647
-+#define PCI_DEVICE_ID_CMD_648 0x0648
-+#define PCI_DEVICE_ID_CMD_649 0x0649
-+#define PCI_DEVICE_ID_CMD_670 0x0670
-+#define PCI_DEVICE_ID_CMD_680 0x0680
-+
-+#define PCI_DEVICE_ID_SII_680 0x0680
-+#define PCI_DEVICE_ID_SII_3112 0x3112
-+#define PCI_DEVICE_ID_SII_1210SA 0x0240
-+
-+#define PCI_VENDOR_ID_VISION 0x1098
-+#define PCI_DEVICE_ID_VISION_QD8500 0x0001
-+#define PCI_DEVICE_ID_VISION_QD8580 0x0002
-+
-+#define PCI_VENDOR_ID_BROOKTREE 0x109e
-+#define PCI_DEVICE_ID_BROOKTREE_848 0x0350
-+#define PCI_DEVICE_ID_BROOKTREE_849A 0x0351
-+#define PCI_DEVICE_ID_BROOKTREE_878_1 0x036e
-+#define PCI_DEVICE_ID_BROOKTREE_878 0x0878
-+#define PCI_DEVICE_ID_BROOKTREE_8474 0x8474
-+
-+#define PCI_VENDOR_ID_SIERRA 0x10a8
-+#define PCI_DEVICE_ID_SIERRA_STB 0x0000
-+
-+#define PCI_VENDOR_ID_SGI 0x10a9
-+#define PCI_DEVICE_ID_SGI_IOC3 0x0003
-+#define PCI_DEVICE_ID_SGI_IOC4 0x100a
-+#define PCI_VENDOR_ID_SGI_LITHIUM 0x1002
-+
-+#define PCI_VENDOR_ID_ACC 0x10aa
-+#define PCI_DEVICE_ID_ACC_2056 0x0000
-+
-+#define PCI_VENDOR_ID_WINBOND 0x10ad
-+#define PCI_DEVICE_ID_WINBOND_83769 0x0001
-+#define PCI_DEVICE_ID_WINBOND_82C105 0x0105
-+#define PCI_DEVICE_ID_WINBOND_83C553 0x0565
-+
-+#define PCI_VENDOR_ID_DATABOOK 0x10b3
-+#define PCI_DEVICE_ID_DATABOOK_87144 0xb106
-+
-+#define PCI_VENDOR_ID_PLX 0x10b5
-+#define PCI_DEVICE_ID_PLX_R685 0x1030
-+#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a
-+#define PCI_DEVICE_ID_PLX_SPCOM800 0x1076
-+#define PCI_DEVICE_ID_PLX_1077 0x1077
-+#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103
-+#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151
-+#define PCI_DEVICE_ID_PLX_R753 0x1152
-+#define PCI_DEVICE_ID_PLX_9030 0x9030
-+#define PCI_DEVICE_ID_PLX_9050 0x9050
-+#define PCI_DEVICE_ID_PLX_9060 0x9060
-+#define PCI_DEVICE_ID_PLX_9060ES 0x906E
-+#define PCI_DEVICE_ID_PLX_9060SD 0x906D
-+#define PCI_DEVICE_ID_PLX_9080 0x9080
-+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001
-+
-+#define PCI_VENDOR_ID_MADGE 0x10b6
-+#define PCI_DEVICE_ID_MADGE_MK2 0x0002
-+#define PCI_DEVICE_ID_MADGE_C155S 0x1001
-+
-+#define PCI_VENDOR_ID_3COM 0x10b7
-+#define PCI_DEVICE_ID_3COM_3C985 0x0001
-+#define PCI_DEVICE_ID_3COM_3C940 0x1700
-+#define PCI_DEVICE_ID_3COM_3C339 0x3390
-+#define PCI_DEVICE_ID_3COM_3C359 0x3590
-+#define PCI_DEVICE_ID_3COM_3C590 0x5900
-+#define PCI_DEVICE_ID_3COM_3C595TX 0x5950
-+#define PCI_DEVICE_ID_3COM_3C595T4 0x5951
-+#define PCI_DEVICE_ID_3COM_3C595MII 0x5952
-+#define PCI_DEVICE_ID_3COM_3C940B 0x80eb
-+#define PCI_DEVICE_ID_3COM_3C900TPO 0x9000
-+#define PCI_DEVICE_ID_3COM_3C900COMBO 0x9001
-+#define PCI_DEVICE_ID_3COM_3C905TX 0x9050
-+#define PCI_DEVICE_ID_3COM_3C905T4 0x9051
-+#define PCI_DEVICE_ID_3COM_3C905B_TX 0x9055
-+#define PCI_DEVICE_ID_3COM_3CR990 0x9900
-+#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902
-+#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903
-+#define PCI_DEVICE_ID_3COM_3CR990B 0x9904
-+#define PCI_DEVICE_ID_3COM_3CR990_FX 0x9905
-+#define PCI_DEVICE_ID_3COM_3CR990SVR95 0x9908
-+#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909
-+#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a
-+
-+#define PCI_VENDOR_ID_SMC 0x10b8
-+#define PCI_DEVICE_ID_SMC_EPIC100 0x0005
-+
-+#define PCI_VENDOR_ID_AL 0x10b9
-+#define PCI_DEVICE_ID_AL_M1445 0x1445
-+#define PCI_DEVICE_ID_AL_M1449 0x1449
-+#define PCI_DEVICE_ID_AL_M1451 0x1451
-+#define PCI_DEVICE_ID_AL_M1461 0x1461
-+#define PCI_DEVICE_ID_AL_M1489 0x1489
-+#define PCI_DEVICE_ID_AL_M1511 0x1511
-+#define PCI_DEVICE_ID_AL_M1513 0x1513
-+#define PCI_DEVICE_ID_AL_M1521 0x1521
-+#define PCI_DEVICE_ID_AL_M1523 0x1523
-+#define PCI_DEVICE_ID_AL_M1531 0x1531
-+#define PCI_DEVICE_ID_AL_M1533 0x1533
-+#define PCI_DEVICE_ID_AL_M1535 0x1535
-+#define PCI_DEVICE_ID_AL_M1541 0x1541
-+#define PCI_DEVICE_ID_AL_M1543 0x1543
-+#define PCI_DEVICE_ID_AL_M1563 0x1563
-+#define PCI_DEVICE_ID_AL_M1621 0x1621
-+#define PCI_DEVICE_ID_AL_M1631 0x1631
-+#define PCI_DEVICE_ID_AL_M1632 0x1632
-+#define PCI_DEVICE_ID_AL_M1641 0x1641
-+#define PCI_DEVICE_ID_AL_M1644 0x1644
-+#define PCI_DEVICE_ID_AL_M1647 0x1647
-+#define PCI_DEVICE_ID_AL_M1651 0x1651
-+#define PCI_DEVICE_ID_AL_M1671 0x1671
-+#define PCI_DEVICE_ID_AL_M1681 0x1681
-+#define PCI_DEVICE_ID_AL_M1683 0x1683
-+#define PCI_DEVICE_ID_AL_M1689 0x1689
-+#define PCI_DEVICE_ID_AL_M3307 0x3307
-+#define PCI_DEVICE_ID_AL_M4803 0x5215
-+#define PCI_DEVICE_ID_AL_M5219 0x5219
-+#define PCI_DEVICE_ID_AL_M5228 0x5228
-+#define PCI_DEVICE_ID_AL_M5229 0x5229
-+#define PCI_DEVICE_ID_AL_M5237 0x5237
-+#define PCI_DEVICE_ID_AL_M5243 0x5243
-+#define PCI_DEVICE_ID_AL_M5451 0x5451
-+#define PCI_DEVICE_ID_AL_M7101 0x7101
-+
-+#define PCI_VENDOR_ID_MITSUBISHI 0x10ba
-+
-+#define PCI_VENDOR_ID_SURECOM 0x10bd
-+#define PCI_DEVICE_ID_SURECOM_NE34 0x0e34
-+
-+#define PCI_VENDOR_ID_NEOMAGIC 0x10c8
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV 0x0005
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS 0x0083
-+
-+#define PCI_VENDOR_ID_ASP 0x10cd
-+#define PCI_DEVICE_ID_ASP_ABP940 0x1200
-+#define PCI_DEVICE_ID_ASP_ABP940U 0x1300
-+#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300
-+
-+#define PCI_VENDOR_ID_MACRONIX 0x10d9
-+#define PCI_DEVICE_ID_MACRONIX_MX98713 0x0512
-+#define PCI_DEVICE_ID_MACRONIX_MX987x5 0x0531
-+
-+#define PCI_VENDOR_ID_TCONRAD 0x10da
-+#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508
-+
-+#define PCI_VENDOR_ID_CERN 0x10dc
-+#define PCI_DEVICE_ID_CERN_SPSB_PMC 0x0001
-+#define PCI_DEVICE_ID_CERN_SPSB_PCI 0x0002
-+#define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021
-+#define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022
-+
-+#define PCI_VENDOR_ID_NVIDIA 0x10de
-+#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
-+#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028
-+#define PCI_DEVICE_ID_NVIDIA_UTNT2 0x0029
-+#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a
-+#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C
-+#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_11 0x0038
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE 0x0042
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x0045
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000 0x004E
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS 0x0052
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057
-+#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066
-+#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_4 0x0086
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_5 0x008c
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e
-+#define PCI_DEVICE_ID_NVIDIA_ITNT2 0x00A0
-+#define PCI_DEVICE_ID_GEFORCE_6800A 0x00c1
-+#define PCI_DEVICE_ID_GEFORCE_6800A_LE 0x00c2
-+#define PCI_DEVICE_ID_GEFORCE_GO_6800 0x00c8
-+#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA 0x00c9
-+#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc
-+#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1
-+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6
-+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_7 0x00df
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_6 0x00e6
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR 0x0100
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR 0x0101
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO 0x0103
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX 0x0110
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2 0x0111
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO 0x0112
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR 0x0113
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT 0x0140
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600 0x0141
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL 0x0145
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540 0x014E
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200 0x014F
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS 0x0150
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200 0x0164
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250 0x0166
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1 0x0167
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1 0x0168
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460 0x0170
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440 0x0171
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420 0x0172
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE 0x0173
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO 0x0174
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO 0x0175
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO 0x0177
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL 0x0178
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200 0x017A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL 0x017B
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL 0x017C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC 0x0189
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS 0x018A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL 0x018B
-+#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2 0x01a0
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE 0x01a4
-+#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO 0x01b1
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_1 0x01c3
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2 0x0202
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC 0x0203
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B 0x0211
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE 0x0212
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT 0x0215
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600 0x0250
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400 0x0251
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200 0x0253
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269
-+#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO 0x0286
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL 0x0288
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL 0x0289
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL 0x028C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA 0x0301
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800 0x0302
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000 0x0308
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000 0x0309
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA 0x0311
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600 0x0312
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE 0x0314
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600 0x031A
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650 0x031B
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700 0x031C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200 0x0320
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA 0x0321
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1 0x0322
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE 0x0323
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200 0x0324
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250 0x0325
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500 0x0326
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100 0x0327
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32 0x0328
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200 0x0329
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI 0x032A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500 0x032B
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300 0x032C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100 0x032D
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA 0x0330
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900 0x0331
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT 0x0332
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA 0x0333
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT 0x0334
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000 0x0338
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700 0x033F
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA 0x0341
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700 0x0342
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE 0x0343
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE 0x0344
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1 0x0347
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E
-+
-+#define PCI_VENDOR_ID_IMS 0x10e0
-+#define PCI_DEVICE_ID_IMS_8849 0x8849
-+#define PCI_DEVICE_ID_IMS_TT128 0x9128
-+#define PCI_DEVICE_ID_IMS_TT3D 0x9135
-+
-+#define PCI_VENDOR_ID_TEKRAM2 0x10e1
-+#define PCI_DEVICE_ID_TEKRAM2_690c 0x690c
-+
-+#define PCI_VENDOR_ID_TUNDRA 0x10e3
-+#define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000
-+
-+#define PCI_VENDOR_ID_AMCC 0x10e8
-+#define PCI_DEVICE_ID_AMCC_MYRINET 0x8043
-+#define PCI_DEVICE_ID_AMCC_PARASTATION 0x8062
-+#define PCI_DEVICE_ID_AMCC_S5933 0x807d
-+#define PCI_DEVICE_ID_AMCC_S5933_HEPC3 0x809c
-+
-+#define PCI_VENDOR_ID_INTERG 0x10ea
-+#define PCI_DEVICE_ID_INTERG_1680 0x1680
-+#define PCI_DEVICE_ID_INTERG_1682 0x1682
-+#define PCI_DEVICE_ID_INTERG_2000 0x2000
-+#define PCI_DEVICE_ID_INTERG_2010 0x2010
-+#define PCI_DEVICE_ID_INTERG_5000 0x5000
-+#define PCI_DEVICE_ID_INTERG_5050 0x5050
-+
-+#define PCI_VENDOR_ID_REALTEK 0x10ec
-+#define PCI_DEVICE_ID_REALTEK_8029 0x8029
-+#define PCI_DEVICE_ID_REALTEK_8129 0x8129
-+#define PCI_DEVICE_ID_REALTEK_8139 0x8139
-+#define PCI_DEVICE_ID_REALTEK_8169 0x8169
-+
-+#define PCI_VENDOR_ID_XILINX 0x10ee
-+#define PCI_DEVICE_ID_TURBOPAM 0x4020
-+
-+#define PCI_VENDOR_ID_TRUEVISION 0x10fa
-+#define PCI_DEVICE_ID_TRUEVISION_T1000 0x000c
-+
-+#define PCI_VENDOR_ID_INIT 0x1101
-+#define PCI_DEVICE_ID_INIT_320P 0x9100
-+#define PCI_DEVICE_ID_INIT_360P 0x9500
-+
-+#define PCI_VENDOR_ID_CREATIVE 0x1102 // duplicate: ECTIVA
-+#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002
-+
-+#define PCI_VENDOR_ID_ECTIVA 0x1102 // duplicate: CREATIVE
-+#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938
-+
-+#define PCI_VENDOR_ID_TTI 0x1103
-+#define PCI_DEVICE_ID_TTI_HPT343 0x0003
-+#define PCI_DEVICE_ID_TTI_HPT366 0x0004
-+#define PCI_DEVICE_ID_TTI_HPT372 0x0005
-+#define PCI_DEVICE_ID_TTI_HPT302 0x0006
-+#define PCI_DEVICE_ID_TTI_HPT371 0x0007
-+#define PCI_DEVICE_ID_TTI_HPT374 0x0008
-+#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 // apparently a 372N variant?
-+
-+#define PCI_VENDOR_ID_VIA 0x1106
-+#define PCI_DEVICE_ID_VIA_8763_0 0x0198
-+#define PCI_DEVICE_ID_VIA_8380_0 0x0204
-+#define PCI_DEVICE_ID_VIA_3238_0 0x0238
-+#define PCI_DEVICE_ID_VIA_PT880 0x0258
-+#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259
-+#define PCI_DEVICE_ID_VIA_3269_0 0x0269
-+#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282
-+#define PCI_DEVICE_ID_VIA_8363_0 0x0305
-+#define PCI_DEVICE_ID_VIA_8371_0 0x0391
-+#define PCI_DEVICE_ID_VIA_8501_0 0x0501
-+#define PCI_DEVICE_ID_VIA_82C505 0x0505
-+#define PCI_DEVICE_ID_VIA_82C561 0x0561
-+#define PCI_DEVICE_ID_VIA_82C586_1 0x0571
-+#define PCI_DEVICE_ID_VIA_82C576 0x0576
-+#define PCI_DEVICE_ID_VIA_82C585 0x0585
-+#define PCI_DEVICE_ID_VIA_82C586_0 0x0586
-+#define PCI_DEVICE_ID_VIA_82C595 0x0595
-+#define PCI_DEVICE_ID_VIA_82C596 0x0596
-+#define PCI_DEVICE_ID_VIA_82C597_0 0x0597
-+#define PCI_DEVICE_ID_VIA_82C598_0 0x0598
-+#define PCI_DEVICE_ID_VIA_8601_0 0x0601
-+#define PCI_DEVICE_ID_VIA_8605_0 0x0605
-+#define PCI_DEVICE_ID_VIA_82C680 0x0680
-+#define PCI_DEVICE_ID_VIA_82C686 0x0686
-+#define PCI_DEVICE_ID_VIA_82C691_0 0x0691
-+#define PCI_DEVICE_ID_VIA_82C693 0x0693
-+#define PCI_DEVICE_ID_VIA_82C693_1 0x0698
-+#define PCI_DEVICE_ID_VIA_82C926 0x0926
-+#define PCI_DEVICE_ID_VIA_82C576_1 0x1571
-+#define PCI_DEVICE_ID_VIA_82C595_97 0x1595
-+#define PCI_DEVICE_ID_VIA_82C586_2 0x3038
-+#define PCI_DEVICE_ID_VIA_82C586_3 0x3040
-+#define PCI_DEVICE_ID_VIA_6305 0x3044
-+#define PCI_DEVICE_ID_VIA_82C596_3 0x3050
-+#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051
-+#define PCI_DEVICE_ID_VIA_82C686_4 0x3057
-+#define PCI_DEVICE_ID_VIA_82C686_5 0x3058
-+#define PCI_DEVICE_ID_VIA_8233_5 0x3059
-+#define PCI_DEVICE_ID_VIA_8233_7 0x3065
-+#define PCI_DEVICE_ID_VIA_82C686_6 0x3068
-+#define PCI_DEVICE_ID_VIA_8233_0 0x3074
-+#define PCI_DEVICE_ID_VIA_8633_0 0x3091
-+#define PCI_DEVICE_ID_VIA_8367_0 0x3099
-+#define PCI_DEVICE_ID_VIA_8653_0 0x3101
-+#define PCI_DEVICE_ID_VIA_8622 0x3102
-+#define PCI_DEVICE_ID_VIA_8233C_0 0x3109
-+#define PCI_DEVICE_ID_VIA_8361 0x3112
-+#define PCI_DEVICE_ID_VIA_XM266 0x3116
-+#define PCI_DEVICE_ID_VIA_612X 0x3119
-+#define PCI_DEVICE_ID_VIA_862X_0 0x3123
-+#define PCI_DEVICE_ID_VIA_8753_0 0x3128
-+#define PCI_DEVICE_ID_VIA_8233A 0x3147
-+#define PCI_DEVICE_ID_VIA_8703_51_0 0x3148
-+#define PCI_DEVICE_ID_VIA_8237_SATA 0x3149
-+#define PCI_DEVICE_ID_VIA_XN266 0x3156
-+#define PCI_DEVICE_ID_VIA_8754C_0 0x3168
-+#define PCI_DEVICE_ID_VIA_8235 0x3177
-+#define PCI_DEVICE_ID_VIA_P4N333 0x3178
-+#define PCI_DEVICE_ID_VIA_8385_0 0x3188
-+#define PCI_DEVICE_ID_VIA_8377_0 0x3189
-+#define PCI_DEVICE_ID_VIA_8378_0 0x3205
-+#define PCI_DEVICE_ID_VIA_8783_0 0x3208
-+#define PCI_DEVICE_ID_VIA_P4M400 0x3209
-+#define PCI_DEVICE_ID_VIA_8237 0x3227
-+#define PCI_DEVICE_ID_VIA_3296_0 0x0296
-+#define PCI_DEVICE_ID_VIA_86C100A 0x6100
-+#define PCI_DEVICE_ID_VIA_8231 0x8231
-+#define PCI_DEVICE_ID_VIA_8231_4 0x8235
-+#define PCI_DEVICE_ID_VIA_8365_1 0x8305
-+#define PCI_DEVICE_ID_VIA_8371_1 0x8391
-+#define PCI_DEVICE_ID_VIA_8501_1 0x8501
-+#define PCI_DEVICE_ID_VIA_82C597_1 0x8597
-+#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
-+#define PCI_DEVICE_ID_VIA_8601_1 0x8601
-+#define PCI_DEVICE_ID_VIA_8505_1 0x8605
-+#define PCI_DEVICE_ID_VIA_8633_1 0xB091
-+#define PCI_DEVICE_ID_VIA_8367_1 0xB099
-+#define PCI_DEVICE_ID_VIA_P4X266_1 0xB101
-+#define PCI_DEVICE_ID_VIA_8615_1 0xB103
-+#define PCI_DEVICE_ID_VIA_8361_1 0xB112
-+#define PCI_DEVICE_ID_VIA_8235_1 0xB168
-+#define PCI_DEVICE_ID_VIA_838X_1 0xB188
-+#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
-+
-+#define PCI_VENDOR_ID_SIEMENS 0x110A
-+#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
-+
-+#define PCI_VENDOR_ID_SMC2 0x1113
-+#define PCI_DEVICE_ID_SMC2_1211TX 0x1211
-+
-+#define PCI_VENDOR_ID_VORTEX 0x1119
-+#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000
-+#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001
-+#define PCI_DEVICE_ID_VORTEX_GDT6x10 0x0002
-+#define PCI_DEVICE_ID_VORTEX_GDT6x20 0x0003
-+#define PCI_DEVICE_ID_VORTEX_GDT6530 0x0004
-+#define PCI_DEVICE_ID_VORTEX_GDT6550 0x0005
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17 0x0006
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27 0x0007
-+#define PCI_DEVICE_ID_VORTEX_GDT6537 0x0008
-+#define PCI_DEVICE_ID_VORTEX_GDT6557 0x0009
-+#define PCI_DEVICE_ID_VORTEX_GDT6x15 0x000a
-+#define PCI_DEVICE_ID_VORTEX_GDT6x25 0x000b
-+#define PCI_DEVICE_ID_VORTEX_GDT6535 0x000c
-+#define PCI_DEVICE_ID_VORTEX_GDT6555 0x000d
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x0100
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x0101
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x0102
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1 0x0110
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1 0x0111
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP1 0x0112
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP1 0x0113
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1 0x0114
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1 0x0115
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2 0x0120
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2 0x0121
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP2 0x0122
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP2 0x0123
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2 0x0124
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2 0x0125
-+
-+#define PCI_VENDOR_ID_EF 0x111a
-+#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000
-+#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002
-+#define PCI_VENDOR_ID_EF_ATM_LANAI2 0x0003
-+#define PCI_VENDOR_ID_EF_ATM_LANAIHB 0x0005
-+
-+#define PCI_VENDOR_ID_IDT 0x111d
-+#define PCI_DEVICE_ID_IDT_IDT77201 0x0001
-+
-+#define PCI_VENDOR_ID_FORE 0x1127
-+#define PCI_DEVICE_ID_FORE_PCA200PC 0x0210
-+#define PCI_DEVICE_ID_FORE_PCA200E 0x0300
-+
-+#define PCI_VENDOR_ID_IMAGINGTECH 0x112f
-+#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI 0x0000
-+
-+#define PCI_VENDOR_ID_PHILIPS 0x1131
-+#define PCI_DEVICE_ID_PHILIPS_SAA7145 0x7145
-+#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146
-+#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730
-+
-+#define PCI_VENDOR_ID_EICON 0x1133
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO 0xe001
-+#define PCI_DEVICE_ID_EICON_DIVA20 0xe002
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO_U 0xe003
-+#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004
-+#define PCI_DEVICE_ID_EICON_DIVA201 0xe005
-+#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b
-+#define PCI_DEVICE_ID_EICON_MAESTRA 0xe010
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ 0xe012
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U 0xe013
-+#define PCI_DEVICE_ID_EICON_MAESTRAP 0xe014
-+
-+#define PCI_VENDOR_ID_ZIATECH 0x1138
-+#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550
-+
-+#define PCI_VENDOR_ID_CYCLONE 0x113c
-+#define PCI_DEVICE_ID_CYCLONE_SDK 0x0001
-+
-+#define PCI_VENDOR_ID_ALLIANCE 0x1142
-+#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO 0x3210
-+#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO 0x6422
-+#define PCI_DEVICE_ID_ALLIANCE_AT24 0x6424
-+#define PCI_DEVICE_ID_ALLIANCE_AT3D 0x643d
-+
-+#define PCI_VENDOR_ID_SYSKONNECT 0x1148
-+#define PCI_DEVICE_ID_SYSKONNECT_FP 0x4000
-+#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200
-+#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300
-+#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320
-+#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400
-+#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500
-+
-+#define PCI_VENDOR_ID_VMIC 0x114a
-+#define PCI_DEVICE_ID_VMIC_VME 0x7587
-+
-+#define PCI_VENDOR_ID_DIGI 0x114f
-+#define PCI_DEVICE_ID_DIGI_EPC 0x0002
-+#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH 0x0003
-+#define PCI_DEVICE_ID_DIGI_XEM 0x0004
-+#define PCI_DEVICE_ID_DIGI_XR 0x0005
-+#define PCI_DEVICE_ID_DIGI_CX 0x0006
-+#define PCI_DEVICE_ID_DIGI_XRJ 0x0009
-+#define PCI_DEVICE_ID_DIGI_EPCJ 0x000a
-+#define PCI_DEVICE_ID_DIGI_XR_920 0x0027
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070
-+#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072
-+#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073
-+#define PCI_DEVICE_ID_NEO_2DB9 0x00C8
-+#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9
-+#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
-+#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
-+
-+#define PCI_VENDOR_ID_MUTECH 0x1159
-+#define PCI_DEVICE_ID_MUTECH_MV1000 0x0001
-+
-+#define PCI_VENDOR_ID_XIRCOM 0x115d
-+#define PCI_DEVICE_ID_XIRCOM_X3201_ETH 0x0003
-+#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
-+#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103
-+
-+#define PCI_VENDOR_ID_RENDITION 0x1163
-+#define PCI_DEVICE_ID_RENDITION_VERITE 0x0001
-+#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
-+
-+#define PCI_VENDOR_ID_SERVERWORKS 0x1166
-+#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
-+#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
-+#define PCI_DEVICE_ID_SERVERWORKS_CIOB30 0x0010
-+#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011
-+#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221
-+#define PCI_DEVICE_ID_SERVERWORKS_GCLE 0x0225
-+#define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230
-+
-+#define PCI_VENDOR_ID_SBE 0x1176
-+#define PCI_DEVICE_ID_SBE_WANXL100 0x0301
-+#define PCI_DEVICE_ID_SBE_WANXL200 0x0302
-+#define PCI_DEVICE_ID_SBE_WANXL400 0x0104
-+
-+#define PCI_VENDOR_ID_TOSHIBA 0x1179
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO 0x0102
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0103
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0105
-+#define PCI_DEVICE_ID_TOSHIBA_601 0x0601
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617
-+
-+#define PCI_VENDOR_ID_TOSHIBA_2 0x102f
-+#define PCI_DEVICE_ID_TOSHIBA_TX3927 0x000a
-+#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030
-+#define PCI_DEVICE_ID_TOSHIBA_TX4927 0x0180
-+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108
-+
-+#define PCI_VENDOR_ID_RICOH 0x1180
-+#define PCI_DEVICE_ID_RICOH_RL5C465 0x0465
-+#define PCI_DEVICE_ID_RICOH_RL5C466 0x0466
-+#define PCI_DEVICE_ID_RICOH_RL5C475 0x0475
-+#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
-+#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
-+
-+#define PCI_VENDOR_ID_DLINK 0x1186
-+#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00
-+
-+#define PCI_VENDOR_ID_ARTOP 0x1191
-+#define PCI_DEVICE_ID_ARTOP_ATP8400 0x0004
-+#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005
-+#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006
-+#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007
-+#define PCI_DEVICE_ID_ARTOP_ATP865 0x0008
-+#define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009
-+#define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002
-+#define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010
-+#define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020
-+#define PCI_DEVICE_ID_ARTOP_AEC7612S 0x8030
-+#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040
-+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050
-+#define PCI_DEVICE_ID_ARTOP_8060 0x8060
-+#define PCI_DEVICE_ID_ARTOP_AEC67160 0x8080
-+#define PCI_DEVICE_ID_ARTOP_AEC67160_2 0x8081
-+#define PCI_DEVICE_ID_ARTOP_AEC67162 0x808a
-+
-+#define PCI_VENDOR_ID_ZEITNET 0x1193
-+#define PCI_DEVICE_ID_ZEITNET_1221 0x0001
-+#define PCI_DEVICE_ID_ZEITNET_1225 0x0002
-+
-+#define PCI_VENDOR_ID_OMEGA 0x119b
-+#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221
-+
-+#define PCI_VENDOR_ID_FUJITSU_ME 0x119e
-+#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001
-+#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003
-+
-+#define PCI_SUBVENDOR_ID_KEYSPAN 0x11a9
-+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334
-+
-+#define PCI_VENDOR_ID_MARVELL 0x11ab
-+#define PCI_DEVICE_ID_MARVELL_GT64011 0x4146
-+#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146
-+#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
-+#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
-+#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
-+#define PCI_DEVICE_ID_MARVELL_GT96100 0x9652
-+#define PCI_DEVICE_ID_MARVELL_GT96100A 0x9653
-+
-+#define PCI_VENDOR_ID_LITEON 0x11ad
-+#define PCI_DEVICE_ID_LITEON_LNE100TX 0x0002
-+
-+#define PCI_VENDOR_ID_V3 0x11b0
-+#define PCI_DEVICE_ID_V3_V960 0x0001
-+#define PCI_DEVICE_ID_V3_V350 0x0001
-+#define PCI_DEVICE_ID_V3_V961 0x0002
-+#define PCI_DEVICE_ID_V3_V351 0x0002
-+
-+#define PCI_VENDOR_ID_NP 0x11bc
-+#define PCI_DEVICE_ID_NP_PCI_FDDI 0x0001
-+
-+#define PCI_VENDOR_ID_ATT 0x11c1
-+#define PCI_DEVICE_ID_ATT_L56XMF 0x0440
-+#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480
-+
-+#define PCI_VENDOR_ID_NEC2 0x11c3 /* NEC (2nd) */
-+
-+#define PCI_VENDOR_ID_SPECIALIX 0x11cb
-+#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000
-+#define PCI_DEVICE_ID_SPECIALIX_XIO 0x4000
-+#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000
-+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
-+
-+#define PCI_VENDOR_ID_AURAVISION 0x11d1
-+#define PCI_DEVICE_ID_AURAVISION_VXP524 0x01f7
-+
-+#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4
-+#define PCI_DEVICE_ID_AD1889JS 0x1889
-+
-+#define PCI_VENDOR_ID_IKON 0x11d5
-+#define PCI_DEVICE_ID_IKON_10115 0x0115
-+#define PCI_DEVICE_ID_IKON_10117 0x0117
-+
-+#define PCI_VENDOR_ID_SEGA 0x11db
-+#define PCI_DEVICE_ID_SEGA_BBA 0x1234
-+
-+#define PCI_VENDOR_ID_ZORAN 0x11de
-+#define PCI_DEVICE_ID_ZORAN_36057 0x6057
-+#define PCI_DEVICE_ID_ZORAN_36120 0x6120
-+
-+#define PCI_VENDOR_ID_KINETIC 0x11f4
-+#define PCI_DEVICE_ID_KINETIC_2915 0x2915
-+
-+#define PCI_VENDOR_ID_COMPEX 0x11f6
-+#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
-+#define PCI_DEVICE_ID_COMPEX_RL2000 0x1401
-+
-+#define PCI_VENDOR_ID_RP 0x11fe
-+#define PCI_DEVICE_ID_RP32INTF 0x0001
-+#define PCI_DEVICE_ID_RP8INTF 0x0002
-+#define PCI_DEVICE_ID_RP16INTF 0x0003
-+#define PCI_DEVICE_ID_RP4QUAD 0x0004
-+#define PCI_DEVICE_ID_RP8OCTA 0x0005
-+#define PCI_DEVICE_ID_RP8J 0x0006
-+#define PCI_DEVICE_ID_RP4J 0x0007
-+#define PCI_DEVICE_ID_RP8SNI 0x0008
-+#define PCI_DEVICE_ID_RP16SNI 0x0009
-+#define PCI_DEVICE_ID_RPP4 0x000A
-+#define PCI_DEVICE_ID_RPP8 0x000B
-+#define PCI_DEVICE_ID_RP8M 0x000C
-+#define PCI_DEVICE_ID_RP4M 0x000D
-+#define PCI_DEVICE_ID_RP2_232 0x000E
-+#define PCI_DEVICE_ID_RP2_422 0x000F
-+#define PCI_DEVICE_ID_URP32INTF 0x0801
-+#define PCI_DEVICE_ID_URP8INTF 0x0802
-+#define PCI_DEVICE_ID_URP16INTF 0x0803
-+#define PCI_DEVICE_ID_URP8OCTA 0x0805
-+#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C
-+#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D
-+#define PCI_DEVICE_ID_CRP16INTF 0x0903
-+
-+#define PCI_VENDOR_ID_CYCLADES 0x120e
-+#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100
-+#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101
-+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102
-+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103
-+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104
-+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105
-+#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200
-+#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201
-+#define PCI_DEVICE_ID_PC300_RX_2 0x0300
-+#define PCI_DEVICE_ID_PC300_RX_1 0x0301
-+#define PCI_DEVICE_ID_PC300_TE_2 0x0310
-+#define PCI_DEVICE_ID_PC300_TE_1 0x0311
-+#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320
-+#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321
-+
-+/* Allied Telesyn */
-+#define PCI_VENDOR_ID_AT 0x1259
-+#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
-+
-+#define PCI_VENDOR_ID_ESSENTIAL 0x120f
-+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001
-+
-+#define PCI_VENDOR_ID_O2 0x1217
-+#define PCI_DEVICE_ID_O2_6729 0x6729
-+#define PCI_DEVICE_ID_O2_6730 0x673a
-+#define PCI_DEVICE_ID_O2_6832 0x6832
-+#define PCI_DEVICE_ID_O2_6836 0x6836
-+
-+#define PCI_VENDOR_ID_3DFX 0x121a
-+#define PCI_DEVICE_ID_3DFX_VOODOO 0x0001
-+#define PCI_DEVICE_ID_3DFX_VOODOO2 0x0002
-+#define PCI_DEVICE_ID_3DFX_BANSHEE 0x0003
-+#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005
-+#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009
-+
-+#define PCI_VENDOR_ID_SIGMADES 0x1236
-+#define PCI_DEVICE_ID_SIGMADES_6425 0x6401
-+
-+#define PCI_VENDOR_ID_CCUBE 0x123f
-+
-+#define PCI_VENDOR_ID_AVM 0x1244
-+#define PCI_DEVICE_ID_AVM_B1 0x0700
-+#define PCI_DEVICE_ID_AVM_C4 0x0800
-+#define PCI_DEVICE_ID_AVM_A1 0x0a00
-+#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00
-+#define PCI_DEVICE_ID_AVM_C2 0x1100
-+#define PCI_DEVICE_ID_AVM_T1 0x1200
-+
-+#define PCI_VENDOR_ID_DIPIX 0x1246
-+
-+#define PCI_VENDOR_ID_STALLION 0x124d
-+#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
-+#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
-+#define PCI_DEVICE_ID_STALLION_EIOPCI 0x0003
-+
-+#define PCI_VENDOR_ID_OPTIBASE 0x1255
-+#define PCI_DEVICE_ID_OPTIBASE_FORGE 0x1110
-+#define PCI_DEVICE_ID_OPTIBASE_FUSION 0x1210
-+#define PCI_DEVICE_ID_OPTIBASE_VPLEX 0x2110
-+#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC 0x2120
-+#define PCI_DEVICE_ID_OPTIBASE_VQUEST 0x2130
-+
-+/* Allied Telesyn */
-+#define PCI_VENDOR_ID_AT 0x1259
-+#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701
-+#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703
-+
-+#define PCI_VENDOR_ID_ESS 0x125d
-+#define PCI_DEVICE_ID_ESS_ESS1968 0x1968
-+#define PCI_DEVICE_ID_ESS_AUDIOPCI 0x1969
-+#define PCI_DEVICE_ID_ESS_ESS1978 0x1978
-+
-+#define PCI_VENDOR_ID_SATSAGEM 0x1267
-+#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016
-+#define PCI_DEVICE_ID_SATSAGEM_PCR2101 0x5352
-+#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
-+
-+#define PCI_VENDOR_ID_HUGHES 0x1273
-+#define PCI_DEVICE_ID_HUGHES_DIRECPC 0x0002
-+
-+#define PCI_VENDOR_ID_ENSONIQ 0x1274
-+#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880
-+#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000
-+#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371
-+
-+#define PCI_VENDOR_ID_TRANSMETA 0x1279
-+#define PCI_DEVICE_ID_EFFICEON 0x0060
-+
-+#define PCI_VENDOR_ID_ROCKWELL 0x127A
-+
-+#define PCI_VENDOR_ID_ITE 0x1283
-+#define PCI_DEVICE_ID_ITE_IT8172G 0x8172
-+#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801
-+#define PCI_DEVICE_ID_ITE_8872 0x8872
-+#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
-+
-+/* formerly Platform Tech */
-+#define PCI_VENDOR_ID_ESS_OLD 0x1285
-+#define PCI_DEVICE_ID_ESS_ESS0100 0x0100
-+
-+#define PCI_VENDOR_ID_ALTEON 0x12ae
-+#define PCI_DEVICE_ID_ALTEON_ACENIC 0x0001
-+
-+#define PCI_VENDOR_ID_USR 0x12B9
-+
-+#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232 0x0003
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485 0x0004
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4 0x0005
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485 0x0006
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2 0x0007
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485 0x0008
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6 0x0009
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B
-+
-+#define PCI_VENDOR_ID_PICTUREL 0x12c5
-+#define PCI_DEVICE_ID_PICTUREL_PCIVST 0x0081
-+
-+#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2
-+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
-+
-+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST 0x12E0
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4 0x0031
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8 0x0021
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16 0x0011
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC 0x0041
-+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS 0x124D
-+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4 0xF001
-+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8 0xF010
-+
-+#define PCI_VENDOR_ID_AUREAL 0x12eb
-+#define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001
-+#define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002
-+#define PCI_DEVICE_ID_AUREAL_ADVANTAGE 0x0003
-+
-+#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
-+#define PCI_DEVICE_ID_LML_33R10 0x8a02
-+
-+#define PCI_VENDOR_ID_CBOARDS 0x1307
-+#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
-+
-+#define PCI_VENDOR_ID_SIIG 0x131f
-+#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
-+#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001
-+#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550 0x1010
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650 0x1011
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850 0x1012
-+#define PCI_DEVICE_ID_SIIG_1P_10x 0x1020
-+#define PCI_DEVICE_ID_SIIG_2P_10x 0x1021
-+#define PCI_DEVICE_ID_SIIG_2S_10x_550 0x1030
-+#define PCI_DEVICE_ID_SIIG_2S_10x_650 0x1031
-+#define PCI_DEVICE_ID_SIIG_2S_10x_850 0x1032
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550 0x1034
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650 0x1035
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850 0x1036
-+#define PCI_DEVICE_ID_SIIG_4S_10x_550 0x1050
-+#define PCI_DEVICE_ID_SIIG_4S_10x_650 0x1051
-+#define PCI_DEVICE_ID_SIIG_4S_10x_850 0x1052
-+#define PCI_DEVICE_ID_SIIG_1S_20x_550 0x2000
-+#define PCI_DEVICE_ID_SIIG_1S_20x_650 0x2001
-+#define PCI_DEVICE_ID_SIIG_1S_20x_850 0x2002
-+#define PCI_DEVICE_ID_SIIG_1P_20x 0x2020
-+#define PCI_DEVICE_ID_SIIG_2P_20x 0x2021
-+#define PCI_DEVICE_ID_SIIG_2S_20x_550 0x2030
-+#define PCI_DEVICE_ID_SIIG_2S_20x_650 0x2031
-+#define PCI_DEVICE_ID_SIIG_2S_20x_850 0x2032
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550 0x2040
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650 0x2041
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850 0x2042
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550 0x2010
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650 0x2011
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850 0x2012
-+#define PCI_DEVICE_ID_SIIG_4S_20x_550 0x2050
-+#define PCI_DEVICE_ID_SIIG_4S_20x_650 0x2051
-+#define PCI_DEVICE_ID_SIIG_4S_20x_850 0x2052
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062
-+
-+#define PCI_VENDOR_ID_RADISYS 0x1331
-+#define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030
-+
-+#define PCI_VENDOR_ID_DOMEX 0x134a
-+#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001
-+
-+#define PCI_VENDOR_ID_QUATECH 0x135C
-+#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
-+#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020
-+#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030
-+#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040
-+#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050
-+#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060
-+
-+#define PCI_VENDOR_ID_SEALEVEL 0x135e
-+#define PCI_DEVICE_ID_SEALEVEL_U530 0x7101
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2 0x7201
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422 0x7402
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202
-+#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401
-+#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804
-+
-+#define PCI_VENDOR_ID_HYPERCOPE 0x1365
-+#define PCI_DEVICE_ID_HYPERCOPE_PLX 0x9050
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO 0x0104
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS 0x0109
-+
-+#define PCI_VENDOR_ID_KAWASAKI 0x136b
-+#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01
-+
-+#define PCI_VENDOR_ID_CNET 0x1371
-+#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e
-+
-+#define PCI_VENDOR_ID_LMC 0x1376
-+#define PCI_DEVICE_ID_LMC_HSSI 0x0003
-+#define PCI_DEVICE_ID_LMC_DS3 0x0004
-+#define PCI_DEVICE_ID_LMC_SSI 0x0005
-+#define PCI_DEVICE_ID_LMC_T1 0x0006
-+
-+#define PCI_VENDOR_ID_NETGEAR 0x1385
-+#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a
-+#define PCI_DEVICE_ID_NETGEAR_GA622 0x622a
-+
-+#define PCI_VENDOR_ID_APPLICOM 0x1389
-+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
-+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
-+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
-+
-+#define PCI_VENDOR_ID_MOXA 0x1393
-+#define PCI_DEVICE_ID_MOXA_RC7000 0x0001
-+#define PCI_DEVICE_ID_MOXA_CP102 0x1020
-+#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021
-+#define PCI_DEVICE_ID_MOXA_CP102U 0x1022
-+#define PCI_DEVICE_ID_MOXA_C104 0x1040
-+#define PCI_DEVICE_ID_MOXA_CP104U 0x1041
-+#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042
-+#define PCI_DEVICE_ID_MOXA_CT114 0x1140
-+#define PCI_DEVICE_ID_MOXA_CP114 0x1141
-+#define PCI_DEVICE_ID_MOXA_CP118U 0x1180
-+#define PCI_DEVICE_ID_MOXA_CP132 0x1320
-+#define PCI_DEVICE_ID_MOXA_CP132U 0x1321
-+#define PCI_DEVICE_ID_MOXA_CP134U 0x1340
-+#define PCI_DEVICE_ID_MOXA_C168 0x1680
-+#define PCI_DEVICE_ID_MOXA_CP168U 0x1681
-+#define PCI_DEVICE_ID_MOXA_CP204J 0x2040
-+#define PCI_DEVICE_ID_MOXA_C218 0x2180
-+#define PCI_DEVICE_ID_MOXA_C320 0x3200
-+
-+#define PCI_VENDOR_ID_CCD 0x1397
-+#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0
-+#define PCI_DEVICE_ID_CCD_B000 0xb000
-+#define PCI_DEVICE_ID_CCD_B006 0xb006
-+#define PCI_DEVICE_ID_CCD_B007 0xb007
-+#define PCI_DEVICE_ID_CCD_B008 0xb008
-+#define PCI_DEVICE_ID_CCD_B009 0xb009
-+#define PCI_DEVICE_ID_CCD_B00A 0xb00a
-+#define PCI_DEVICE_ID_CCD_B00B 0xb00b
-+#define PCI_DEVICE_ID_CCD_B00C 0xb00c
-+#define PCI_DEVICE_ID_CCD_B100 0xb100
-+
-+#define PCI_VENDOR_ID_EXAR 0x13a8
-+#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152
-+#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154
-+#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158
-+
-+#define PCI_VENDOR_ID_MICROGATE 0x13c0
-+#define PCI_DEVICE_ID_MICROGATE_USC 0x0010
-+#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020
-+#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030
-+#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210
-+
-+#define PCI_VENDOR_ID_3WARE 0x13C1
-+#define PCI_DEVICE_ID_3WARE_1000 0x1000
-+#define PCI_DEVICE_ID_3WARE_7000 0x1001
-+#define PCI_DEVICE_ID_3WARE_9000 0x1002
-+
-+#define PCI_VENDOR_ID_IOMEGA 0x13ca
-+#define PCI_DEVICE_ID_IOMEGA_BUZ 0x4231
-+
-+#define PCI_VENDOR_ID_ABOCOM 0x13D1
-+#define PCI_DEVICE_ID_ABOCOM_2BD1 0x2BD1
-+
-+#define PCI_VENDOR_ID_CMEDIA 0x13f6
-+#define PCI_DEVICE_ID_CMEDIA_CM8338A 0x0100
-+#define PCI_DEVICE_ID_CMEDIA_CM8338B 0x0101
-+#define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111
-+#define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112
-+
-+#define PCI_VENDOR_ID_LAVA 0x1407
-+#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */
-+#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */
-+#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */
-+#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */
-+#define PCI_DEVICE_ID_LAVA_QUAD_A 0x0201 /* 2x 16650, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_QUAD_B 0x0202 /* 2x 16650, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_SSERIAL 0x0500 /* 1x 16550 */
-+#define PCI_DEVICE_ID_LAVA_PORT_650 0x0600 /* 1x 16650 */
-+#define PCI_DEVICE_ID_LAVA_PARALLEL 0x8000
-+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A 0x8002 /* The Lava Dual Parallel is */
-+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B 0x8003 /* two PCI devices on a card */
-+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR 0x8800
-+
-+#define PCI_VENDOR_ID_TIMEDIA 0x1409
-+#define PCI_DEVICE_ID_TIMEDIA_1889 0x7168
-+
-+#define PCI_VENDOR_ID_OXSEMI 0x1415
-+#define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403
-+#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501
-+#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511
-+#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513
-+#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521
-+
-+#define PCI_VENDOR_ID_SAMSUNG 0x144d
-+
-+#define PCI_VENDOR_ID_AIRONET 0x14b9
-+#define PCI_DEVICE_ID_AIRONET_4800_1 0x0001
-+#define PCI_DEVICE_ID_AIRONET_4800 0x4500 // values switched? see
-+#define PCI_DEVICE_ID_AIRONET_4500 0x4800 // drivers/net/aironet4500_card.c
-+
-+#define PCI_VENDOR_ID_TITAN 0x14D2
-+#define PCI_DEVICE_ID_TITAN_010L 0x8001
-+#define PCI_DEVICE_ID_TITAN_100L 0x8010
-+#define PCI_DEVICE_ID_TITAN_110L 0x8011
-+#define PCI_DEVICE_ID_TITAN_200L 0x8020
-+#define PCI_DEVICE_ID_TITAN_210L 0x8021
-+#define PCI_DEVICE_ID_TITAN_400L 0x8040
-+#define PCI_DEVICE_ID_TITAN_800L 0x8080
-+#define PCI_DEVICE_ID_TITAN_100 0xA001
-+#define PCI_DEVICE_ID_TITAN_200 0xA005
-+#define PCI_DEVICE_ID_TITAN_400 0xA003
-+#define PCI_DEVICE_ID_TITAN_800B 0xA004
-+
-+#define PCI_VENDOR_ID_PANACOM 0x14d4
-+#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400
-+#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402
-+
-+#define PCI_VENDOR_ID_SIPACKETS 0x14d9
-+#define PCI_DEVICE_ID_SP_HT 0x0010
-+
-+#define PCI_VENDOR_ID_AFAVLAB 0x14db
-+#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180
-+#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
-+
-+#define PCI_VENDOR_ID_BROADCOM 0x14e4
-+#define PCI_DEVICE_ID_TIGON3_5752 0x1600
-+#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
-+#define PCI_DEVICE_ID_TIGON3_5700 0x1644
-+#define PCI_DEVICE_ID_TIGON3_5701 0x1645
-+#define PCI_DEVICE_ID_TIGON3_5702 0x1646
-+#define PCI_DEVICE_ID_TIGON3_5703 0x1647
-+#define PCI_DEVICE_ID_TIGON3_5704 0x1648
-+#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649
-+#define PCI_DEVICE_ID_NX2_5706 0x164a
-+#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d
-+#define PCI_DEVICE_ID_TIGON3_5705 0x1653
-+#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654
-+#define PCI_DEVICE_ID_TIGON3_5720 0x1658
-+#define PCI_DEVICE_ID_TIGON3_5721 0x1659
-+#define PCI_DEVICE_ID_TIGON3_5705M 0x165d
-+#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e
-+#define PCI_DEVICE_ID_TIGON3_5705F 0x166e
-+#define PCI_DEVICE_ID_TIGON3_5750 0x1676
-+#define PCI_DEVICE_ID_TIGON3_5751 0x1677
-+#define PCI_DEVICE_ID_TIGON3_5750M 0x167c
-+#define PCI_DEVICE_ID_TIGON3_5751M 0x167d
-+#define PCI_DEVICE_ID_TIGON3_5751F 0x167e
-+#define PCI_DEVICE_ID_TIGON3_5782 0x1696
-+#define PCI_DEVICE_ID_TIGON3_5788 0x169c
-+#define PCI_DEVICE_ID_TIGON3_5789 0x169d
-+#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6
-+#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7
-+#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8
-+#define PCI_DEVICE_ID_NX2_5706S 0x16aa
-+#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6
-+#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7
-+#define PCI_DEVICE_ID_TIGON3_5781 0x16dd
-+#define PCI_DEVICE_ID_TIGON3_5753 0x16f7
-+#define PCI_DEVICE_ID_TIGON3_5753M 0x16fd
-+#define PCI_DEVICE_ID_TIGON3_5753F 0x16fe
-+#define PCI_DEVICE_ID_TIGON3_5901 0x170d
-+#define PCI_DEVICE_ID_BCM4401B1 0x170c
-+#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e
-+#define PCI_DEVICE_ID_BCM4401 0x4401
-+#define PCI_DEVICE_ID_BCM4401B0 0x4402
-+
-+#define PCI_VENDOR_ID_TOPIC 0x151f
-+#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
-+
-+#define PCI_VENDOR_ID_ENE 0x1524
-+#define PCI_DEVICE_ID_ENE_1211 0x1211
-+#define PCI_DEVICE_ID_ENE_1225 0x1225
-+#define PCI_DEVICE_ID_ENE_1410 0x1410
-+#define PCI_DEVICE_ID_ENE_1420 0x1420
-+
-+#define PCI_VENDOR_ID_SYBA 0x1592
-+#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782
-+#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783
-+
-+#define PCI_VENDOR_ID_MORETON 0x15aa
-+#define PCI_DEVICE_ID_RASTEL_2PORT 0x2000
-+
-+#define PCI_VENDOR_ID_ZOLTRIX 0x15b0
-+#define PCI_DEVICE_ID_ZOLTRIX_2BD0 0x2bd0
-+
-+#define PCI_VENDOR_ID_MELLANOX 0x15b3
-+#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44
-+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
-+#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282
-+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
-+#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274
-+
-+#define PCI_VENDOR_ID_PDC 0x15e9
-+#define PCI_DEVICE_ID_PDC_1841 0x1841
-+
-+#define PCI_VENDOR_ID_MACROLINK 0x15ed
-+#define PCI_DEVICE_ID_MACROLINK_MCCS8 0x1000
-+#define PCI_DEVICE_ID_MACROLINK_MCCS 0x1001
-+#define PCI_DEVICE_ID_MACROLINK_MCCS8H 0x1002
-+#define PCI_DEVICE_ID_MACROLINK_MCCSH 0x1003
-+#define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000
-+#define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001
-+
-+#define PCI_VENDOR_ID_FARSITE 0x1619
-+#define PCI_DEVICE_ID_FARSITE_T2P 0x0400
-+#define PCI_DEVICE_ID_FARSITE_T4P 0x0440
-+#define PCI_DEVICE_ID_FARSITE_T1U 0x0610
-+#define PCI_DEVICE_ID_FARSITE_T2U 0x0620
-+#define PCI_DEVICE_ID_FARSITE_T4U 0x0640
-+#define PCI_DEVICE_ID_FARSITE_TE1 0x1610
-+#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612
-+
-+#define PCI_VENDOR_ID_SIBYTE 0x166d
-+#define PCI_DEVICE_ID_BCM1250_HT 0x0002
-+
-+#define PCI_VENDOR_ID_LINKSYS 0x1737
-+#define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032
-+#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064
-+
-+#define PCI_VENDOR_ID_ALTIMA 0x173b
-+#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8
-+#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9
-+#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea
-+#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb
-+
-+#define PCI_VENDOR_ID_S2IO 0x17d5
-+#define PCI_DEVICE_ID_S2IO_WIN 0x5731
-+#define PCI_DEVICE_ID_S2IO_UNI 0x5831
-+#define PCI_DEVICE_ID_HERC_WIN 0x5732
-+#define PCI_DEVICE_ID_HERC_UNI 0x5832
-+
-+#define PCI_VENDOR_ID_INFINICON 0x1820
-+
-+#define PCI_VENDOR_ID_TOPSPIN 0x1867
-+
-+#define PCI_VENDOR_ID_TDI 0x192E
-+#define PCI_DEVICE_ID_TDI_EHCI 0x0101
-+
-+#define PCI_VENDOR_ID_SYMPHONY 0x1c1c
-+#define PCI_DEVICE_ID_SYMPHONY_101 0x0001
-+
-+#define PCI_VENDOR_ID_TEKRAM 0x1de1
-+#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
-+
-+#define PCI_VENDOR_ID_HINT 0x3388
-+#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
-+
-+#define PCI_VENDOR_ID_3DLABS 0x3d3d
-+#define PCI_DEVICE_ID_3DLABS_300SX 0x0001
-+#define PCI_DEVICE_ID_3DLABS_500TX 0x0002
-+#define PCI_DEVICE_ID_3DLABS_DELTA 0x0003
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA 0x0004
-+#define PCI_DEVICE_ID_3DLABS_MX 0x0006
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007
-+#define PCI_DEVICE_ID_3DLABS_GAMMA 0x0008
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009
-+
-+#define PCI_VENDOR_ID_AVANCE 0x4005
-+#define PCI_DEVICE_ID_AVANCE_ALG2064 0x2064
-+#define PCI_DEVICE_ID_AVANCE_2302 0x2302
-+
-+#define PCI_VENDOR_ID_AKS 0x416c
-+#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
-+#define PCI_DEVICE_ID_AKS_CPC 0x0200
-+
-+#define PCI_VENDOR_ID_REDCREEK 0x4916
-+#define PCI_DEVICE_ID_RC45 0x1960
-+
-+#define PCI_VENDOR_ID_NETVIN 0x4a14
-+#define PCI_DEVICE_ID_NETVIN_NV5000SC 0x5000
-+
-+#define PCI_VENDOR_ID_S3 0x5333
-+#define PCI_DEVICE_ID_S3_PLATO_PXS 0x0551
-+#define PCI_DEVICE_ID_S3_ViRGE 0x5631
-+#define PCI_DEVICE_ID_S3_TRIO 0x8811
-+#define PCI_DEVICE_ID_S3_AURORA64VP 0x8812
-+#define PCI_DEVICE_ID_S3_TRIO64UVP 0x8814
-+#define PCI_DEVICE_ID_S3_ViRGE_VX 0x883d
-+#define PCI_DEVICE_ID_S3_868 0x8880
-+#define PCI_DEVICE_ID_S3_928 0x88b0
-+#define PCI_DEVICE_ID_S3_864_1 0x88c0
-+#define PCI_DEVICE_ID_S3_864_2 0x88c1
-+#define PCI_DEVICE_ID_S3_964_1 0x88d0
-+#define PCI_DEVICE_ID_S3_964_2 0x88d1
-+#define PCI_DEVICE_ID_S3_968 0x88f0
-+#define PCI_DEVICE_ID_S3_TRIO64V2 0x8901
-+#define PCI_DEVICE_ID_S3_PLATO_PXG 0x8902
-+#define PCI_DEVICE_ID_S3_ViRGE_DXGX 0x8a01
-+#define PCI_DEVICE_ID_S3_ViRGE_GX2 0x8a10
-+#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25
-+#define PCI_DEVICE_ID_S3_ViRGE_MX 0x8c01
-+#define PCI_DEVICE_ID_S3_ViRGE_MXP 0x8c02
-+#define PCI_DEVICE_ID_S3_ViRGE_MXPMV 0x8c03
-+#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04
-+#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00
-+
-+#define PCI_VENDOR_ID_DUNORD 0x5544
-+#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
-+
-+#define PCI_VENDOR_ID_DCI 0x6666
-+#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001
-+#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002
-+
-+#define PCI_VENDOR_ID_DUNORD 0x5544
-+#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
-+
-+#define PCI_VENDOR_ID_GENROCO 0x5555
-+#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003
-+
-+#define PCI_VENDOR_ID_INTEL 0x8086
-+#define PCI_DEVICE_ID_INTEL_EESSC 0x0008
-+#define PCI_DEVICE_ID_INTEL_21145 0x0039
-+#define PCI_DEVICE_ID_INTEL_82375 0x0482
-+#define PCI_DEVICE_ID_INTEL_82424 0x0483
-+#define PCI_DEVICE_ID_INTEL_82378 0x0484
-+#define PCI_DEVICE_ID_INTEL_82430 0x0486
-+#define PCI_DEVICE_ID_INTEL_82434 0x04a3
-+#define PCI_DEVICE_ID_INTEL_I960 0x0960
-+#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
-+#define PCI_DEVICE_ID_INTEL_82562ET 0x1031
-+#define PCI_DEVICE_ID_INTEL_82801CAM 0x1038
-+#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130
-+#define PCI_DEVICE_ID_INTEL_82815_AB 0x1131
-+#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132
-+#define PCI_DEVICE_ID_INTEL_82559ER 0x1209
-+#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
-+#define PCI_DEVICE_ID_INTEL_82092AA_1 0x1222
-+#define PCI_DEVICE_ID_INTEL_7116 0x1223
-+#define PCI_DEVICE_ID_INTEL_7505_0 0x2550
-+#define PCI_DEVICE_ID_INTEL_7505_1 0x2552
-+#define PCI_DEVICE_ID_INTEL_7205_0 0x255d
-+#define PCI_DEVICE_ID_INTEL_82596 0x1226
-+#define PCI_DEVICE_ID_INTEL_82865 0x1227
-+#define PCI_DEVICE_ID_INTEL_82557 0x1229
-+#define PCI_DEVICE_ID_INTEL_82437 0x122d
-+#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e
-+#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230
-+#define PCI_DEVICE_ID_INTEL_82371MX 0x1234
-+#define PCI_DEVICE_ID_INTEL_82437MX 0x1235
-+#define PCI_DEVICE_ID_INTEL_82441 0x1237
-+#define PCI_DEVICE_ID_INTEL_82380FB 0x124b
-+#define PCI_DEVICE_ID_INTEL_82439 0x1250
-+#define PCI_DEVICE_ID_INTEL_80960_RP 0x1960
-+#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21
-+#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30
-+#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410
-+#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411
-+#define PCI_DEVICE_ID_INTEL_82801AA_2 0x2412
-+#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413
-+#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415
-+#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416
-+#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418
-+#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420
-+#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421
-+#define PCI_DEVICE_ID_INTEL_82801AB_2 0x2422
-+#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423
-+#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425
-+#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426
-+#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428
-+#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440
-+#define PCI_DEVICE_ID_INTEL_82801BA_1 0x2442
-+#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443
-+#define PCI_DEVICE_ID_INTEL_82801BA_3 0x2444
-+#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445
-+#define PCI_DEVICE_ID_INTEL_82801BA_5 0x2446
-+#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448
-+#define PCI_DEVICE_ID_INTEL_82801BA_7 0x2449
-+#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a
-+#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b
-+#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c
-+#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e
-+#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450
-+#define PCI_DEVICE_ID_INTEL_82801E_2 0x2452
-+#define PCI_DEVICE_ID_INTEL_82801E_3 0x2453
-+#define PCI_DEVICE_ID_INTEL_82801E_9 0x2459
-+#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b
-+#define PCI_DEVICE_ID_INTEL_82801E_13 0x245d
-+#define PCI_DEVICE_ID_INTEL_82801E_14 0x245e
-+#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480
-+#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482
-+#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483
-+#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484
-+#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485
-+#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486
-+#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487
-+#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a
-+#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b
-+#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c
-+#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0
-+#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1
-+#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2
-+#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3
-+#define PCI_DEVICE_ID_INTEL_82801DB_4 0x24c4
-+#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5
-+#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6
-+#define PCI_DEVICE_ID_INTEL_82801DB_7 0x24c7
-+#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9
-+#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca
-+#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb
-+#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc
-+#define PCI_DEVICE_ID_INTEL_82801DB_13 0x24cd
-+#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0
-+#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1
-+#define PCI_DEVICE_ID_INTEL_82801EB_2 0x24d2
-+#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3
-+#define PCI_DEVICE_ID_INTEL_82801EB_4 0x24d4
-+#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
-+#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
-+#define PCI_DEVICE_ID_INTEL_82801EB_7 0x24d7
-+#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
-+#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
-+#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1
-+#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2
-+#define PCI_DEVICE_ID_INTEL_ESB_3 0x25a3
-+#define PCI_DEVICE_ID_INTEL_ESB_31 0x25b0
-+#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4
-+#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6
-+#define PCI_DEVICE_ID_INTEL_ESB_6 0x25a7
-+#define PCI_DEVICE_ID_INTEL_ESB_7 0x25a9
-+#define PCI_DEVICE_ID_INTEL_ESB_8 0x25aa
-+#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab
-+#define PCI_DEVICE_ID_INTEL_ESB_11 0x25ac
-+#define PCI_DEVICE_ID_INTEL_ESB_12 0x25ad
-+#define PCI_DEVICE_ID_INTEL_ESB_13 0x25ae
-+#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500
-+#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501
-+#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530
-+#define PCI_DEVICE_ID_INTEL_82860_HB 0x2531
-+#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560
-+#define PCI_DEVICE_ID_INTEL_82845G_IG 0x2562
-+#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570
-+#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572
-+#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578
-+#define PCI_DEVICE_ID_INTEL_82875_IG 0x257b
-+#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580
-+#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582
-+#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590
-+#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592
-+#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770
-+#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772
-+#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
-+#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
-+#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
-+#define PCI_DEVICE_ID_INTEL_ICH6_3 0x2651
-+#define PCI_DEVICE_ID_INTEL_ICH6_4 0x2652
-+#define PCI_DEVICE_ID_INTEL_ICH6_5 0x2653
-+#define PCI_DEVICE_ID_INTEL_ICH6_6 0x2658
-+#define PCI_DEVICE_ID_INTEL_ICH6_7 0x2659
-+#define PCI_DEVICE_ID_INTEL_ICH6_8 0x265a
-+#define PCI_DEVICE_ID_INTEL_ICH6_9 0x265b
-+#define PCI_DEVICE_ID_INTEL_ICH6_10 0x265c
-+#define PCI_DEVICE_ID_INTEL_ICH6_11 0x2660
-+#define PCI_DEVICE_ID_INTEL_ICH6_12 0x2662
-+#define PCI_DEVICE_ID_INTEL_ICH6_13 0x2664
-+#define PCI_DEVICE_ID_INTEL_ICH6_14 0x2666
-+#define PCI_DEVICE_ID_INTEL_ICH6_15 0x2668
-+#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a
-+#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d
-+#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e
-+#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f
-+#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670
-+#define PCI_DEVICE_ID_INTEL_ESB2_1 0x2680
-+#define PCI_DEVICE_ID_INTEL_ESB2_2 0x2681
-+#define PCI_DEVICE_ID_INTEL_ESB2_3 0x2682
-+#define PCI_DEVICE_ID_INTEL_ESB2_4 0x2683
-+#define PCI_DEVICE_ID_INTEL_ESB2_5 0x2688
-+#define PCI_DEVICE_ID_INTEL_ESB2_6 0x2689
-+#define PCI_DEVICE_ID_INTEL_ESB2_7 0x268a
-+#define PCI_DEVICE_ID_INTEL_ESB2_8 0x268b
-+#define PCI_DEVICE_ID_INTEL_ESB2_9 0x268c
-+#define PCI_DEVICE_ID_INTEL_ESB2_10 0x2690
-+#define PCI_DEVICE_ID_INTEL_ESB2_11 0x2692
-+#define PCI_DEVICE_ID_INTEL_ESB2_12 0x2694
-+#define PCI_DEVICE_ID_INTEL_ESB2_13 0x2696
-+#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698
-+#define PCI_DEVICE_ID_INTEL_ESB2_15 0x2699
-+#define PCI_DEVICE_ID_INTEL_ESB2_16 0x269a
-+#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b
-+#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e
-+#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8
-+#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9
-+#define PCI_DEVICE_ID_INTEL_ICH7_2 0x27c0
-+#define PCI_DEVICE_ID_INTEL_ICH7_3 0x27c1
-+#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0
-+#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd
-+#define PCI_DEVICE_ID_INTEL_ICH7_5 0x27c4
-+#define PCI_DEVICE_ID_INTEL_ICH7_6 0x27c5
-+#define PCI_DEVICE_ID_INTEL_ICH7_7 0x27c8
-+#define PCI_DEVICE_ID_INTEL_ICH7_8 0x27c9
-+#define PCI_DEVICE_ID_INTEL_ICH7_9 0x27ca
-+#define PCI_DEVICE_ID_INTEL_ICH7_10 0x27cb
-+#define PCI_DEVICE_ID_INTEL_ICH7_11 0x27cc
-+#define PCI_DEVICE_ID_INTEL_ICH7_12 0x27d0
-+#define PCI_DEVICE_ID_INTEL_ICH7_13 0x27d2
-+#define PCI_DEVICE_ID_INTEL_ICH7_14 0x27d4
-+#define PCI_DEVICE_ID_INTEL_ICH7_15 0x27d6
-+#define PCI_DEVICE_ID_INTEL_ICH7_16 0x27d8
-+#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da
-+#define PCI_DEVICE_ID_INTEL_ICH7_18 0x27dc
-+#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd
-+#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de
-+#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df
-+#define PCI_DEVICE_ID_INTEL_ICH7_22 0x27e0
-+#define PCI_DEVICE_ID_INTEL_ICH7_23 0x27e2
-+#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340
-+#define PCI_DEVICE_ID_INTEL_ESB2_19 0x3500
-+#define PCI_DEVICE_ID_INTEL_ESB2_20 0x3501
-+#define PCI_DEVICE_ID_INTEL_ESB2_21 0x3504
-+#define PCI_DEVICE_ID_INTEL_ESB2_22 0x3505
-+#define PCI_DEVICE_ID_INTEL_ESB2_23 0x350c
-+#define PCI_DEVICE_ID_INTEL_ESB2_24 0x350d
-+#define PCI_DEVICE_ID_INTEL_ESB2_25 0x3510
-+#define PCI_DEVICE_ID_INTEL_ESB2_26 0x3511
-+#define PCI_DEVICE_ID_INTEL_ESB2_27 0x3514
-+#define PCI_DEVICE_ID_INTEL_ESB2_28 0x3515
-+#define PCI_DEVICE_ID_INTEL_ESB2_29 0x3518
-+#define PCI_DEVICE_ID_INTEL_ESB2_30 0x3519
-+#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
-+#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
-+#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
-+#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582
-+#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590
-+#define PCI_DEVICE_ID_INTEL_E7320_MCH 0x3592
-+#define PCI_DEVICE_ID_INTEL_MCH_PA 0x3595
-+#define PCI_DEVICE_ID_INTEL_MCH_PA1 0x3596
-+#define PCI_DEVICE_ID_INTEL_MCH_PB 0x3597
-+#define PCI_DEVICE_ID_INTEL_MCH_PB1 0x3598
-+#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599
-+#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a
-+#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e
-+#define PCI_DEVICE_ID_INTEL_80310 0x530d
-+#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
-+#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
-+#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020
-+#define PCI_DEVICE_ID_INTEL_82437VX 0x7030
-+#define PCI_DEVICE_ID_INTEL_82439TX 0x7100
-+#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110
-+#define PCI_DEVICE_ID_INTEL_82371AB 0x7111
-+#define PCI_DEVICE_ID_INTEL_82371AB_2 0x7112
-+#define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113
-+#define PCI_DEVICE_ID_INTEL_82810_MC1 0x7120
-+#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121
-+#define PCI_DEVICE_ID_INTEL_82810_MC3 0x7122
-+#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123
-+#define PCI_DEVICE_ID_INTEL_82810E_MC 0x7124
-+#define PCI_DEVICE_ID_INTEL_82810E_IG 0x7125
-+#define PCI_DEVICE_ID_INTEL_82443LX_0 0x7180
-+#define PCI_DEVICE_ID_INTEL_82443LX_1 0x7181
-+#define PCI_DEVICE_ID_INTEL_82443BX_0 0x7190
-+#define PCI_DEVICE_ID_INTEL_82443BX_1 0x7191
-+#define PCI_DEVICE_ID_INTEL_82443BX_2 0x7192
-+#define PCI_DEVICE_ID_INTEL_440MX 0x7195
-+#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198
-+#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199
-+#define PCI_DEVICE_ID_INTEL_82443MX_2 0x719a
-+#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b
-+#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0
-+#define PCI_DEVICE_ID_INTEL_82443GX_1 0x71a1
-+#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2
-+#define PCI_DEVICE_ID_INTEL_82372FB_0 0x7600
-+#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601
-+#define PCI_DEVICE_ID_INTEL_82372FB_2 0x7602
-+#define PCI_DEVICE_ID_INTEL_82372FB_3 0x7603
-+#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4
-+#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5
-+#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca
-+#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
-+#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
-+#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500
-+#define PCI_DEVICE_ID_INTEL_IXP2400 0x9001
-+#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004
-+#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
-+
-+#define PCI_VENDOR_ID_COMPUTONE 0x8e0e
-+#define PCI_DEVICE_ID_COMPUTONE_IP2EX 0x0291
-+#define PCI_DEVICE_ID_COMPUTONE_PG 0x0302
-+#define PCI_SUBVENDOR_ID_COMPUTONE 0x8e0e
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4 0x0001
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8 0x0002
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003
-+
-+#define PCI_VENDOR_ID_KTI 0x8e2e
-+#define PCI_DEVICE_ID_KTI_ET32P2 0x3000
-+
-+#define PCI_VENDOR_ID_ADAPTEC 0x9004
-+#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078
-+#define PCI_DEVICE_ID_ADAPTEC_7821 0x2178
-+#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860
-+#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078
-+#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578
-+#define PCI_DEVICE_ID_ADAPTEC_5800 0x5800
-+#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038
-+#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075
-+#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078
-+#define PCI_DEVICE_ID_ADAPTEC_7861 0x6178
-+#define PCI_DEVICE_ID_ADAPTEC_7870 0x7078
-+#define PCI_DEVICE_ID_ADAPTEC_7871 0x7178
-+#define PCI_DEVICE_ID_ADAPTEC_7872 0x7278
-+#define PCI_DEVICE_ID_ADAPTEC_7873 0x7378
-+#define PCI_DEVICE_ID_ADAPTEC_7874 0x7478
-+#define PCI_DEVICE_ID_ADAPTEC_7895 0x7895
-+#define PCI_DEVICE_ID_ADAPTEC_7880 0x8078
-+#define PCI_DEVICE_ID_ADAPTEC_7881 0x8178
-+#define PCI_DEVICE_ID_ADAPTEC_7882 0x8278
-+#define PCI_DEVICE_ID_ADAPTEC_7883 0x8378
-+#define PCI_DEVICE_ID_ADAPTEC_7884 0x8478
-+#define PCI_DEVICE_ID_ADAPTEC_7885 0x8578
-+#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678
-+#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778
-+#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878
-+#define PCI_DEVICE_ID_ADAPTEC_1030 0x8b78
-+
-+#define PCI_VENDOR_ID_ADAPTEC2 0x9005
-+#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010
-+#define PCI_DEVICE_ID_ADAPTEC2_2930U2 0x0011
-+#define PCI_DEVICE_ID_ADAPTEC2_7890B 0x0013
-+#define PCI_DEVICE_ID_ADAPTEC2_7890 0x001f
-+#define PCI_DEVICE_ID_ADAPTEC2_3940U2 0x0050
-+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D 0x0051
-+#define PCI_DEVICE_ID_ADAPTEC2_7896 0x005f
-+#define PCI_DEVICE_ID_ADAPTEC2_7892A 0x0080
-+#define PCI_DEVICE_ID_ADAPTEC2_7892B 0x0081
-+#define PCI_DEVICE_ID_ADAPTEC2_7892D 0x0083
-+#define PCI_DEVICE_ID_ADAPTEC2_7892P 0x008f
-+#define PCI_DEVICE_ID_ADAPTEC2_7899A 0x00c0
-+#define PCI_DEVICE_ID_ADAPTEC2_7899B 0x00c1
-+#define PCI_DEVICE_ID_ADAPTEC2_7899D 0x00c3
-+#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf
-+#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503
-+
-+#define PCI_VENDOR_ID_ATRONICS 0x907f
-+#define PCI_DEVICE_ID_ATRONICS_2015 0x2015
-+
-+#define PCI_VENDOR_ID_HOLTEK 0x9412
-+#define PCI_DEVICE_ID_HOLTEK_6565 0x6565
-+
-+#define PCI_VENDOR_ID_NETMOS 0x9710
-+#define PCI_DEVICE_ID_NETMOS_9705 0x9705
-+#define PCI_DEVICE_ID_NETMOS_9715 0x9715
-+#define PCI_DEVICE_ID_NETMOS_9735 0x9735
-+#define PCI_DEVICE_ID_NETMOS_9745 0x9745
-+#define PCI_DEVICE_ID_NETMOS_9755 0x9755
-+#define PCI_DEVICE_ID_NETMOS_9805 0x9805
-+#define PCI_DEVICE_ID_NETMOS_9815 0x9815
-+#define PCI_DEVICE_ID_NETMOS_9835 0x9835
-+#define PCI_DEVICE_ID_NETMOS_9845 0x9845
-+#define PCI_DEVICE_ID_NETMOS_9855 0x9855
-+
-+#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
-+#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
-+
-+#define PCI_VENDOR_ID_TIGERJET 0xe159
-+#define PCI_DEVICE_ID_TIGERJET_300 0x0001
-+#define PCI_DEVICE_ID_TIGERJET_100 0x0002
-+
-+#define PCI_VENDOR_ID_TTTECH 0x0357
-+#define PCI_DEVICE_ID_TTTECH_MC322 0x000A
-+
-+#define PCI_VENDOR_ID_ARK 0xedd8
-+#define PCI_DEVICE_ID_ARK_STING 0xa091
-+#define PCI_DEVICE_ID_ARK_STINGARK 0xa099
-+#define PCI_DEVICE_ID_ARK_2000MT 0xa0a1
projects / openwrt.git / blobdiff