1 From bdc913d1ef5143a8728ae414fcb90f9ed87a58da Mon Sep 17 00:00:00 2001
2 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
3 Date: Mon, 23 Dec 2013 00:32:39 -0300
4 Subject: [PATCH] clk: sunxi: mod0 support
6 Content-Type: text/plain; charset=UTF-8
7 Content-Transfer-Encoding: 8bit
9 This commit implements support for the "module 0" type of clocks, as
10 used by MMC, IR, NAND, SATA and other components.
12 Signed-off-by: Emilio López <emilio@elopez.com.ar>
13 Acked-by: Mike Turquette <mturquette@linaro.org>
15 Documentation/devicetree/bindings/clock/sunxi.txt | 5 +-
16 drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++
17 2 files changed, 61 insertions(+), 1 deletion(-)
19 diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
20 index 80b2a39..46d8433 100644
21 --- a/Documentation/devicetree/bindings/clock/sunxi.txt
22 +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
23 @@ -35,10 +35,13 @@ Required properties:
24 "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
25 "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
26 "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
27 + "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
29 Required properties for all clocks:
30 - reg : shall be the control register address for the clock.
31 -- clocks : shall be the input parent clock(s) phandle for the clock
32 +- clocks : shall be the input parent clock(s) phandle for the clock. For
33 + multiplexed clocks, the list order must match the hardware
35 - #clock-cells : from common clock binding; shall be set to 0 except for
36 "allwinner,*-gates-clk" where it shall be set to 1
38 diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
39 index 649d7c3..af99b57 100644
40 --- a/drivers/clk/sunxi/clk-sunxi.c
41 +++ b/drivers/clk/sunxi/clk-sunxi.c
42 @@ -295,6 +295,47 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate,
46 + * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
47 + * MMC rate is calculated as follows
48 + * rate = (parent_rate >> p) / (m + 1);
51 +static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate,
52 + u8 *n, u8 *k, u8 *m, u8 *p)
54 + u8 div, calcm, calcp;
56 + /* These clocks can only divide, so we will never be able to achieve
57 + * frequencies higher than the parent frequency */
58 + if (*freq > parent_rate)
59 + *freq = parent_rate;
61 + div = parent_rate / *freq;
65 + else if (div / 2 < 16)
67 + else if (div / 4 < 16)
72 + calcm = DIV_ROUND_UP(div, 1 << calcp);
74 + *freq = (parent_rate >> calcp) / calcm;
76 + /* we were called to round the frequency, we can now return */
87 * sunxi_factors_clk_setup() - Setup function for factor clocks
90 @@ -341,6 +382,14 @@ struct factors_data {
94 +/* user manual says "n" but it's really "p" */
95 +static struct clk_factors_config sun4i_mod0_config = {
102 static const struct factors_data sun4i_pll1_data __initconst = {
104 .table = &sun4i_pll1_config,
105 @@ -364,6 +413,13 @@ struct factors_data {
106 .getter = sun4i_get_apb1_factors,
109 +static const struct factors_data sun4i_mod0_data __initconst = {
112 + .table = &sun4i_mod0_config,
113 + .getter = sun4i_get_mod0_factors,
116 static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
117 const struct factors_data *data)
119 @@ -852,6 +908,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
120 {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
121 {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
122 {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
123 + {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},