6 model = "VG3503J - BT OpenReach VDSL Modem";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 reg = <0x0 0x2000000>;
18 ranges = <0 0 0x0 0x3ffffff>;
20 compatible = "lantiq,nor";
22 reg = <0 0x0 0x2000000>;
28 reg = <0x00000 0x20000>;
33 reg = <0x20000 0x400000>;
38 reg = <0x420000 0x320000>;
43 reg = <0x740000 0x80000>;
47 label = "pri_bfocus_cfg";
48 reg = <0x7c0000 0x10000>;
52 label = "sec_bfocus_cfg";
53 reg = <0x7d0000 0x10000>;
58 reg = <0x7e0000 0x10000>;
63 reg = <0x7f0000 0x10000>;
68 gpio: pinmux@E100B10 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&state_default>;
72 state_default: pinmux {
74 lantiq,groups = "mdio";
75 lantiq,function = "mdio";
83 compatible = "lantiq,xrx200-net";
84 reg = < 0xE108000 0x3000 /* switch */
85 0xE10B100 0x70 /* mdio */
86 0xE10B1D8 0x30 /* mii */
87 0xE10B308 0x30 /* pmac */
89 interrupt-parent = <&icu0>;
93 compatible = "lantiq,xrx200-pdi";
97 mac-address = [ 00 11 22 33 44 55 ];
100 compatible = "lantiq,xrx200-pdi-port";
103 phy-handle = <&phy11>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy13>;
114 #address-cells = <1>;
116 compatible = "lantiq,xrx200-mdio";
117 phy11: ethernet-phy@11 {
119 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
120 lantiq,c45-reg-init = <1 0 0 0>;
122 phy13: ethernet-phy@13 {
124 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
125 lantiq,c45-reg-init = <1 0 0 0>;
132 compatible = "lantiq,phy-xrx200";
133 firmware = "lantiq/vr9_phy22f_a1x.bin";
138 compatible = "gpio-keys-polled";
139 #address-cells = <1>;
141 poll-interval = <100>;
145 linux,code = <0x198>;
150 compatible = "gpio-leds";
153 label = "bt:green:port2";
157 label = "bt:green:lan2";
161 label = "bt:orange:port2";
166 gpios = <&gpio 14 1>;
170 gpios = <&gpio 19 1>;
174 gpios = <&gpio 28 1>;
177 label = "bt:green:lan1";
178 gpios = <&gpio 44 0>;
181 label = "bt:green:port1";
182 gpios = <&gpio 45 0>;
185 label = "bt:orange:port1";
186 gpios = <&gpio 47 0>;