target/linux/ixp4xx/patches-2.6.26/120-compex_support.patch

   1 --- a/arch/arm/mach-ixp4xx/Kconfig
   2 +++ b/arch/arm/mach-ixp4xx/Kconfig
   3 @@ -83,6 +83,14 @@
   4         depends on MACH_PRONGHORN
   5         default y
   6
   7 +config MACH_COMPEX
   8 +       bool "Compex WP18 / NP18A"
   9 +       select PCI
  10 +       help
  11 +         Say 'Y' here if you want your kernel to support Compex'
  12 +         WP18 or NP18A boards. For more information on this
  13 +         platform, see http://openwrt.org
  14 +
  15  config ARCH_IXDP425
  16         bool "IXDP425"
  17         help
  18 --- a/arch/arm/mach-ixp4xx/Makefile
  19 +++ b/arch/arm/mach-ixp4xx/Makefile
  20 @@ -18,6 +18,7 @@
  21  obj-pci-$(CONFIG_MACH_WG302V2)         += wg302v2-pci.o
  22  obj-pci-$(CONFIG_MACH_FSG)             += fsg-pci.o
  23  obj-pci-$(CONFIG_MACH_PRONGHORN)       += pronghorn-pci.o
  24 +obj-pci-$(CONFIG_MACH_COMPEX)          += ixdp425-pci.o
  25
  26  obj-y  += common.o
  27
  28 @@ -34,6 +35,7 @@
  29  obj-$(CONFIG_MACH_WG302V2)     += wg302v2-setup.o
  30  obj-$(CONFIG_MACH_FSG)         += fsg-setup.o
  31  obj-$(CONFIG_MACH_PRONGHORN)   += pronghorn-setup.o
  32 +obj-$(CONFIG_MACH_COMPEX)      += compex-setup.o
  33
  34  obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
  35  obj-$(CONFIG_IXP4XX_QMGR)      += ixp4xx_qmgr.o
  36 --- /dev/null
  37 +++ b/arch/arm/mach-ixp4xx/compex-setup.c
  38 @@ -0,0 +1,120 @@
  39 +/*
  40 + * arch/arm/mach-ixp4xx/compex-setup.c
  41 + *
  42 + * Ccompex WP18 / NP18A board-setup
  43 + *
  44 + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
  45 + *
  46 + * based on ixdp425-setup.c:
  47 + *     Copyright (C) 2003-2005 MontaVista Software, Inc.
  48 + *
  49 + * Author: Imre Kaloz <Kaloz@openwrt.org>
  50 + */
  51 +
  52 +#include <linux/kernel.h>
  53 +#include <linux/init.h>
  54 +#include <linux/device.h>
  55 +#include <linux/serial.h>
  56 +#include <linux/tty.h>
  57 +#include <linux/serial_8250.h>
  58 +#include <linux/slab.h>
  59 +
  60 +#include <asm/types.h>
  61 +#include <asm/setup.h>
  62 +#include <asm/memory.h>
  63 +#include <asm/hardware.h>
  64 +#include <asm/mach-types.h>
  65 +#include <asm/irq.h>
  66 +#include <asm/mach/arch.h>
  67 +#include <asm/mach/flash.h>
  68 +
  69 +static struct flash_platform_data compex_flash_data = {
  70 +       .map_name       = "cfi_probe",
  71 +       .width          = 2,
  72 +};
  73 +
  74 +static struct resource compex_flash_resource = {
  75 +       .flags          = IORESOURCE_MEM,
  76 +};
  77 +
  78 +static struct platform_device compex_flash = {
  79 +       .name           = "IXP4XX-Flash",
  80 +       .id             = 0,
  81 +       .dev            = {
  82 +               .platform_data = &compex_flash_data,
  83 +       },
  84 +       .num_resources  = 1,
  85 +       .resource       = &compex_flash_resource,
  86 +};
  87 +
  88 +static struct resource compex_uart_resources[] = {
  89 +       {
  90 +               .start          = IXP4XX_UART1_BASE_PHYS,
  91 +               .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
  92 +               .flags          = IORESOURCE_MEM
  93 +       },
  94 +       {
  95 +               .start          = IXP4XX_UART2_BASE_PHYS,
  96 +               .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
  97 +               .flags          = IORESOURCE_MEM
  98 +       }
  99 +};
 100 +
 101 +static struct plat_serial8250_port compex_uart_data[] = {
 102 +       {
 103 +               .mapbase        = IXP4XX_UART1_BASE_PHYS,
 104 +               .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 105 +               .irq            = IRQ_IXP4XX_UART1,
 106 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 107 +               .iotype         = UPIO_MEM,
 108 +               .regshift       = 2,
 109 +               .uartclk        = IXP4XX_UART_XTAL,
 110 +       },
 111 +       {
 112 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 113 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 114 +               .irq            = IRQ_IXP4XX_UART2,
 115 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 116 +               .iotype         = UPIO_MEM,
 117 +               .regshift       = 2,
 118 +               .uartclk        = IXP4XX_UART_XTAL,
 119 +       },
 120 +       { },
 121 +};
 122 +
 123 +static struct platform_device compex_uart = {
 124 +       .name                   = "serial8250",
 125 +       .id                     = PLAT8250_DEV_PLATFORM,
 126 +       .dev.platform_data      = compex_uart_data,
 127 +       .num_resources          = 2,
 128 +       .resource               = compex_uart_resources,
 129 +};
 130 +
 131 +static struct platform_device *compex_devices[] __initdata = {
 132 +       &compex_flash,
 133 +       &compex_uart
 134 +};
 135 +
 136 +static void __init compex_init(void)
 137 +{
 138 +       ixp4xx_sys_init();
 139 +
 140 +       compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 141 +       compex_flash_resource.end =
 142 +               IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 143 +
 144 +       platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
 145 +}
 146 +
 147 +#ifdef CONFIG_MACH_COMPEX
 148 +MACHINE_START(COMPEX, "Compex WP18 / NP18A")
 149 +       /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
 150 +       .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
 151 +       .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 152 +       .map_io         = ixp4xx_map_io,
 153 +       .init_irq       = ixp4xx_init_irq,
 154 +       .timer          = &ixp4xx_timer,
 155 +       .boot_params    = 0x0100,
 156 +       .init_machine   = compex_init,
 157 +MACHINE_END
 158 +#endif
 159 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
 160 +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
 161 @@ -66,7 +66,7 @@
 162  int __init ixdp425_pci_init(void)
 163  {
 164         if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
 165 -                       machine_is_ixdp465() || machine_is_kixrp435())
 166 +                       machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
 167                 pci_common_init(&ixdp425_pci);
 168         return 0;
 169  }
 170 --- a/arch/arm/tools/mach-types
 171 +++ b/arch/arm/tools/mach-types
 172 @@ -1276,7 +1276,7 @@
 173  smdk6400               MACH_SMDK6400           SMDK6400                1270
 174  nokia_n800             MACH_NOKIA_N800         NOKIA_N800              1271
 175  greenphone             MACH_GREENPHONE         GREENPHONE              1272
 176 -compex42x              MACH_COMPEXWP18         COMPEXWP18              1273
 177 +compex                 MACH_COMPEX             COMPEX                  1273
 178  xmate                  MACH_XMATE              XMATE                   1274
 179  energizer              MACH_ENERGIZER          ENERGIZER               1275
 180  ime1                   MACH_IME1               IME1                    1276