2 * Copyright 2013 Gateworks Corporation
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 #include "imx6dl.dtsi"
16 model = "Gateworks Ventana i.MX6 DualLite GW53XX";
17 compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
19 /* these are used by bootloader for disabling nodes */
39 bootargs = "console=ttymxc1,115200";
43 reg = <0x10000000 0x40000000>;
47 compatible = "gpio-leds";
51 gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
53 linux,default-trigger = "heartbeat";
58 gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
59 default-state = "off";
64 gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
65 default-state = "off";
70 compatible = "simple-bus";
73 compatible = "regulator-fixed";
74 regulator-name = "1P0V";
75 regulator-min-microvolt = <1000000>;
76 regulator-max-microvolt = <1000000>;
80 /* remove this fixed regulator once ltc3676__sw2 driver available */
82 compatible = "regulator-fixed";
83 regulator-name = "1P8V";
84 regulator-min-microvolt = <1800000>;
85 regulator-max-microvolt = <1800000>;
90 compatible = "regulator-fixed";
91 regulator-name = "3P3V";
92 regulator-min-microvolt = <3300000>;
93 regulator-max-microvolt = <3300000>;
97 reg_usb_h1_vbus: usb_h1_vbus {
98 compatible = "regulator-fixed";
99 regulator-name = "usb_h1_vbus";
100 regulator-min-microvolt = <5000000>;
101 regulator-max-microvolt = <5000000>;
105 reg_usb_otg_vbus: usb_otg_vbus {
106 compatible = "regulator-fixed";
107 regulator-name = "usb_otg_vbus";
108 regulator-min-microvolt = <5000000>;
109 regulator-max-microvolt = <5000000>;
110 gpio = <&gpio3 22 0>;
116 compatible = "fsl,imx6q-sabrelite-sgtl5000",
117 "fsl,imx-audio-sgtl5000";
118 model = "imx6q-sabrelite-sgtl5000";
119 ssi-controller = <&ssi1>;
120 audio-codec = <&codec>;
122 "MIC_IN", "Mic Jack",
123 "Mic Jack", "Mic Bias",
124 "Headphone Jack", "HP_OUT";
131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_audmux_1>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_enet_1>;
144 phy-reset-gpios = <&gpio1 30 0>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&pinctrl_gpmi_nand_2>;
155 clock-frequency = <100000>;
156 pinctrl-names = "default";
157 pinctrl-0 = <&pinctrl_i2c1_1>;
161 compatible = "atmel,24c02";
167 compatible = "atmel,24c02";
173 compatible = "atmel,24c02";
179 compatible = "atmel,24c02";
185 compatible = "nxp,pca9555";
192 compatible = "gw,gsp";
197 compatible = "dallas,ds1672";
203 clock-frequency = <100000>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_i2c2_2>;
208 pciswitch: pex8609@3f {
209 compatible = "plx,pex8609";
214 compatible = "ltc,ltc3676";
218 sw1_reg: ltc3676__sw1 {
219 regulator-min-microvolt = <1175000>;
220 regulator-max-microvolt = <1175000>;
225 sw2_reg: ltc3676__sw2 {
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <1800000>;
232 sw3_reg: ltc3676__sw3 {
233 regulator-min-microvolt = <1175000>;
234 regulator-max-microvolt = <1175000>;
239 sw4_reg: ltc3676__sw4 {
240 regulator-min-microvolt = <1500000>;
241 regulator-max-microvolt = <1500000>;
246 ldo2_reg: ltc3676__ldo2 {
247 regulator-min-microvolt = <2500000>;
248 regulator-max-microvolt = <2500000>;
253 ldo3_reg: ltc3676__ldo3 {
254 regulator-min-microvolt = <1800000>;
255 regulator-max-microvolt = <1800000>;
260 ldo4_reg: ltc3676__ldo4 {
261 regulator-min-microvolt = <3000000>;
262 regulator-max-microvolt = <3000000>;
269 clock-frequency = <100000>;
270 pinctrl-names = "default";
271 pinctrl-0 = <&pinctrl_i2c3_2>;
274 accelerometer: fxos8700@1e {
275 compatible = "fsl,fxos8700";
280 compatible = "fsl,sgtl5000";
282 clocks = <&clks 169>;
283 VDDA-supply = <®_1p8v>;
284 VDDIO-supply = <®_3p3v>;
288 compatible = "adi,adv7611";
292 touchscreen: egalax_ts@04 {
293 compatible = "eeti,egalax_ts";
295 interrupt-parent = <&gpio7>;
296 interrupts = <12 2>; /* gpio7_12 active low */
297 wakeup-gpios = <&gpio7 12 0>;
300 videoout: adv7393@2a {
301 compatible = "adi,adv7393";
305 videoin: adv7180@20 {
306 compatible = "adi,adv7180";
312 pinctrl-names = "default";
313 pinctrl-0 = <&pinctrl_hog>;
316 pinctrl_hog: hoggrp {
318 MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
319 MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
320 MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
321 MX6DL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
322 MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
323 MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
324 MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
325 MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
326 MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
327 MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
328 MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
329 MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
330 MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
331 MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
332 MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
333 MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
342 crtcs = <&ipu1 0>, <&ipu1 1>;
347 reset-gpio = <&gpio1 29 0>;
350 eth1: sky2@8 { /* MAC/PHY on bus 8 */
351 compatible = "marvell,sky2";
352 /* Filled in by U-Boot */
353 mac-address = [ 00 00 00 00 00 00 ];
358 fsl,mode = "i2s-slave";
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_uart1_2>;
369 pinctrl-names = "default";
370 pinctrl-0 = <&pinctrl_uart2_1>;
375 pinctrl-names = "default";
376 pinctrl-0 = <&pinctrl_uart5_1>;
381 vbus-supply = <®_usb_otg_vbus>;
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_usbotg_1>;
384 disable-over-current;
389 vbus-supply = <®_usb_h1_vbus>;
394 pinctrl-names = "default";
395 pinctrl-0 = <&pinctrl_usdhc3_2>;
396 cd-gpios = <&gpio7 0 0>;
397 vmmc-supply = <®_3p3v>;