target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm

   1 #!/bin/sh
   2
   3 set_preinit_iface() {
   4         ifname=eth0
   5
   6         # hardware specific overrides
   7         case "$(cat /proc/diag/model)" in
   8                 "Linksys WAP54G V1") ifname=eth1;;
   9                 "ASUS WL-HDD") ifname=eth1;;
  10                 "ASUS WL-300g") ifname=eth1;;
  11                 "ASUS (unknown, BCM4702)") ifname=eth1;;
  12                 "Sitecom WL-105b") ifname=eth1;;
  13         esac
  14
  15         # The interface has to be up to configure the switch
  16         ifconfig $ifname 0.0.0.0 up
  17         [ -f /lib/modules/`uname -r`/switch-robo.ko ] && {
  18                 rmmod switch-robo
  19                 insmod switch-robo
  20         }
  21         [ -f /lib/modules/`uname -r`/switch-adm.ko ] && {
  22                 rmmod switch-adm
  23                 insmod switch-adm
  24         }
  25 }
  26
  27 init_iface() {
  28         [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
  29                 case "$(cat /proc/switch/eth0/cpuport)" in
  30                         "5") cpu_port="5u*";;
  31                         "8") cpu_port="8u*";;
  32                 esac
  33         }
  34 }
  35
  36 boot_hook_add preinit_main set_preinit_iface
  37 boot_hook_add preinit_main init_iface