[openwrt.git] / target / linux / brcm-2.4 / files / arch / mips / bcm947xx / include / sbsprom.h

/*
 * SPROM format definitions for the Broadcom 47xx and 43xx chip family.
 *
 * $Id$
 * Copyright(c) 2002 Broadcom Corporation
 */

#ifndef _SBSPROM_H
#define _SBSPROM_H

#include "typedefs.h"
#include "bcmdevs.h"

/* A word is this many bytes */
#define SRW             2

/* offset into PCI config space for write enable bit */
#define CFG_SROM_WRITABLE_OFFSET        0x88
#define SROM_WRITEABLE                  0x10

/* enumeration space consists of N contiguous 4Kbyte core register sets */
#define SBCORES_BASE    0x18000000
#define SBCORES_EACH    0x1000

/* offset from BAR0 for srom space */
#define SROM_BASE       4096

/* number of 2-byte words in srom */
#define SROM_SIZE       64

#define SROM_BYTES      (SROM_SIZE * SRW)

#define MAX_FN          4

/* Word 0, Hardware control */
#define SROM_HWCTL      0
#define HW_FUNMSK       0x000f
#define HW_FCLK         0x0200
#define HW_CBM          0x0400
#define HW_PIMSK        0xf000
#define HW_PISHIFT      12
#define HW_4301PISHIFT 13
#define HW_PI4402       0x2
#define HW_FUN4401      0x0001
#define HW_FCLK4402     0x0000

/* Word 1, common-power/boot-rom */
#define SROM_COMMPW             1
/* boot rom present bit */
#define BR_PRESSHIFT    8
/* 15:9 for n; boot rom size is 2^(14 + n) bytes */
#define BR_SIZESHIFT    9

/* Word 2, SubsystemId */
#define SROM_SSID       2

/* Word 3, VendorId */
#define SROM_VID        3

/* Function 0 info, function info length */
#define SROM_FN0        4
#define SROM_FNSZ       8

/* Within each function: */
/* Word 0, deviceID */
#define SRFN_DID        0

/* Words 1-2, ClassCode */
#define SRFN_CCL        1
/* Word 2, D0 Power */
#define SRFN_CCHD0      2

/* Word 3, PME and D1D2D3 power */
#define SRFN_PMED123    3

#define PME_IL          0
#define PME_ENET0       1
#define PME_ENET1       2
#define PME_CODEC       3

#define PME_4402_ENET   0
#define PME_4402_CODEC  1
#define PME_4301_WL     2
#define PMEREP_4402_ENET        (PMERD3CV | PMERD3CA | PMERD3H | PMERD2 | PMERD1 | PMERD0 | PME)

/* Word 4, Bar1 enable, pme reports */
#define SRFN_B1PMER     4
#define B1E             1
#define B1SZMSK 0xe
#define B1SZSH          1
#define PMERMSK 0x0ff0
#define PME             0x0010
#define PMERD0          0x0020
#define PMERD1          0x0040
#define PMERD2          0x0080
#define PMERD3H 0x0100
#define PMERD3CA        0x0200
#define PMERD3CV        0x0400
#define IGNCLKRR        0x0800
#define B0LMSK          0xf000

/* Words 4-5, Bar0 Sonics value */
#define SRFN_B0H        5
/* Words 6-7, CIS Pointer */
#define SRFN_CISL       6
#define SRFN_CISH       7

/* Words 36-38: iLine MAC address */
#define SROM_I_MACHI    36
#define SROM_I_MACMID   37
#define SROM_I_MACLO    38

/* Words 36-38: wireless0 MAC address on 43xx */
#define SROM_W0_MACHI   36
#define SROM_W0_MACMID  37
#define SROM_W0_MACLO   38

/* Words 39-41: enet0 MAC address */
#define SROM_E0_MACHI   39
#define SROM_E0_MACMID  40
#define SROM_E0_MACLO   41

/* Words 42-44: enet1 MAC address */
#define SROM_E1_MACHI   42
#define SROM_E1_MACMID  43
#define SROM_E1_MACLO   44

/* Words 42-44: wireless1 MAC address on 4309 */
#define SROM_W1_MACHI   42
#define SROM_W1_MACMID  43
#define SROM_W1_MACLO   44

#define SROM_EPHY       45

/* Word 46: BdRev & Antennas0/1 & ccLock for 430x */
#define SROM_REV_AA_LOCK        46

/* Words 47-51 wl0 PA bx */
#define SROM_WL0_PAB0   47
#define SROM_WL0_PAB1   48
#define SROM_WL0_PAB2   49
#define SROM_WL0_PAB3   50
#define SROM_WL0_PAB4   51

/* Word 52: wl0/wl1 MaxPower */
#define SROM_WL_MAXPWR  52

/* Words 53-55 wl1 PA bx */
#define SROM_WL1_PAB0   53
#define SROM_WL1_PAB1   54
#define SROM_WL1_PAB2   55

/* Woprd 56: itt */
#define SROM_ITT        56

/* Words 59-62: OEM Space */
#define SROM_WL_OEM     59
#define SROM_OEM_SIZE   4

/* Contents for the srom */

#define BU4710_SSID     0x0400
#define VSIM4710_SSID   0x0401
#define QT4710_SSID     0x0402

#define BU4610_SSID     0x0403
#define VSIM4610_SSID   0x0404

#define BU4307_SSID     0x0405
#define BCM94301CB_SSID 0x0406
#define BCM94301MP_SSID 0x0407
#define BCM94307MP_SSID 0x0408
#define AP4307_SSID     0x0409

#define BU4309_SSID     0x040a
#define BCM94309CB_SSID 0x040b
#define BCM94309MP_SSID 0x040c
#define AP4309_SSID     0x040d

#define BU4402_SSID     0x4402

#define CLASS_OTHER     0x8000
#define CLASS_ETHER     0x0000
#define CLASS_NET       0x0002
#define CLASS_COMM      0x0007
#define CLASS_MODEM     0x0300
#define CLASS_MIPS      0x3000
#define CLASS_PROC      0x000b
#define CLASS_FLASH     0x0100
#define CLASS_MEM       0x0005
#define CLASS_SERIALBUS 0x000c
#define CLASS_OHCI      0x0310

/* Broadcom IEEE MAC addresses are 00:90:4c:xx:xx:xx */
#define MACHI                   0x90

#define MACMID_BU4710I          0x4c17
#define MACMID_BU4710E0         0x4c18
#define MACMID_BU4710E1         0x4c19

#define MACMID_94710R1I         0x4c1a
#define MACMID_94710R1E0        0x4c1b
#define MACMID_94710R1E1        0x4c1c

#define MACMID_94710R4I         0x4c1d
#define MACMID_94710R4E0        0x4c1e
#define MACMID_94710R4E1        0x4c1f

#define MACMID_94710DEVI        0x4c20
#define MACMID_94710DEVE0       0x4c21
#define MACMID_94710DEVE1       0x4c22

#define MACMID_BU4402           0x4c23

#define MACMID_BU4610I          0x4c24
#define MACMID_BU4610E0         0x4c25
#define MACMID_BU4610E1         0x4c26

#define MACMID_BU4307W          0x4c27
#define MACMID_BU4307E          0x4c28

#define MACMID_94301CB          0x4c29

#define MACMID_94301MP          0x4c2a

#define MACMID_94307MPW         0x4c2b
#define MACMID_94307MPE         0x4c2c

#define MACMID_AP4307W          0x4c2d
#define MACMID_AP4307E          0x4c2e

#define MACMID_BU4309W0         0x4c2f
#define MACMID_BU4309W1         0x4c30
#define MACMID_BU4309E          0x4c31

#define MACMID_94309CBW0        0x4c32
#define MACMID_94309CBW1        0x4c33

#define MACMID_94309MPW0        0x4c34
#define MACMID_94309MPW1        0x4c35
#define MACMID_94309MPE         0x4c36

#define MACMID_BU4401           0x4c37

/* Enet phy settings one or two singles or a dual       */
/* Bits 4-0 : MII address for enet0 (0x1f for not there */
/* Bits 9-5 : MII address for enet1 (0x1f for not there */
/* Bit 14   : Mdio for enet0  */
/* Bit 15   : Mdio for enet1  */

/* bu4710 with only one phy on enet1 with address 7: */
#define SROM_EPHY_ONE   0x80ff

/* bu4710 with two individual phys, at 6 and 7, */
/* each mdio connected to its own mac: */
#define SROM_EPHY_TWO   0x80e6

/* bu4710 with a dual phy addresses 0 & 1, mdio-connected to enet0 */
#define SROM_EPHY_DUAL  0x0001

/* r1 board with a dual phy at 0, 1 (NOT swapped and mdc0 */
#define SROM_EPHY_R1    0x0010

/* r4 board with a single phy on enet0 at address 5 and a switch */
/* chip on enet1 (speciall case: 0x1e */
#define SROM_EPHY_R4    0x83e5

/* 4402 uses an internal phy at phyaddr 1; want mdcport == coreunit == 0 */
#define SROM_EPHY_INTERNAL 0x0001

/* 4307 uses an external phy at phyaddr 0; want mdcport == coreunit == 0 */
#define SROM_EPHY_ZERO  0x0000

#define SROM_VERS       0x0001


#endif  /* _SBSPROM_H */