f8b576a4c60f411fe0de7398f33a09e5b4b83c00
[openwrt.git] / target / linux / adm5120 / files / drivers / usb / host / adm5120.h
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6  *
7  * This file is licenced under the GPL.
8  */
9
10 /*
11  * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
12  * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
13  * host controller implementation.
14  */
15 typedef __u32 __bitwise __hc32;
16 typedef __u16 __bitwise __hc16;
17
18 /*
19  * OHCI Endpoint Descriptor (ED) ... holds TD queue
20  * See OHCI spec, section 4.2
21  *
22  * This is a "Queue Head" for those transfers, which is why
23  * both EHCI and UHCI call similar structures a "QH".
24  */
25
26 #define TD_DATALEN_MAX  4096
27
28 #define ED_ALIGN        16
29 #define ED_MASK ((u32)~(ED_ALIGN-1))    /* strip hw status in low addr bits */
30
31 struct ed {
32         /* first fields are hardware-specified */
33         __hc32                  hwINFO;      /* endpoint config bitmap */
34         /* info bits defined by hcd */
35 #define ED_DEQUEUE      (1 << 27)
36         /* info bits defined by the hardware */
37 #define ED_MPS_SHIFT    16
38 #define ED_MPS_MASK     ((1 << 11)-1)
39 #define ED_MPS_GET(x)   (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK)
40 #define ED_ISO          (1 << 15)               /* isochronous endpoint */
41 #define ED_SKIP         (1 << 14)
42 #define ED_SPEED_FULL   (1 << 13)               /* fullspeed device */
43 #define ED_INT          (1 << 11)               /* interrupt endpoint */
44 #define ED_EN_SHIFT     7                       /* endpoint shift */
45 #define ED_EN_MASK      ((1 << 4)-1)            /* endpoint mask */
46 #define ED_EN_GET(x)    (((x) >> ED_EN_SHIFT) & ED_EN_MASK)
47 #define ED_FA_MASK      ((1 << 7)-1)            /* function address mask */
48 #define ED_FA_GET(x)    ((x) & ED_FA_MASK)
49         __hc32                  hwTailP;        /* tail of TD list */
50         __hc32                  hwHeadP;        /* head of TD list (hc r/w) */
51 #define ED_C            (0x02)                  /* toggle carry */
52 #define ED_H            (0x01)                  /* halted */
53         __hc32                  hwNextED;       /* next ED in list */
54
55         /* rest are purely for the driver's use */
56         dma_addr_t              dma;            /* addr of ED */
57         struct td               *dummy;         /* next TD to activate */
58
59         struct urb_priv         *urb_active;    /* active URB */
60         struct list_head        urb_pending;    /* pending URBs */
61
62         struct list_head        ed_list;        /* list of all EDs*/
63         struct list_head        rm_list;        /* for remove list */
64
65         /* host's view of schedule */
66         struct ed               *ed_next;       /* on schedule list */
67         struct ed               *ed_prev;       /* for non-interrupt EDs */
68         struct ed               *ed_rm_next;    /* on rm list */
69
70         /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
71          * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
72          */
73         u8                      state;
74 #define ED_NEW          0x00            /* just allocated */
75 #define ED_IDLE         0x01            /* linked into HC, but not running */
76 #define ED_OPER         0x02            /* linked into HC and running */
77 #define ED_UNLINK       0x03            /* being unlinked from HC */
78
79         u8                      type;           /* PIPE_{BULK,...} */
80
81         /* periodic scheduling params (for intr and iso) */
82         u8                      branch;
83         u16                     interval;
84         u16                     load;
85         u16                     last_iso;       /* iso only */
86
87         /* HC may see EDs on rm_list until next frame (frame_no == tick) */
88         u16                     tick;
89 } __attribute__ ((aligned(ED_ALIGN)));
90
91 /*
92  * OHCI Transfer Descriptor (TD) ... one per transfer segment
93  * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
94  * and 4.3.2 (iso)
95  */
96
97 #define TD_ALIGN        32
98 #define TD_MASK ((u32)~(TD_ALIGN-1))    /* strip hw status in low addr bits */
99
100 struct td {
101         /* first fields are hardware-specified */
102         __hc32          hwINFO;         /* transfer info bitmask */
103
104         /* hwINFO bits */
105 #define TD_OWN          (1 << 31)               /* owner of the descriptor */
106 #define TD_CC_SHIFT     27                      /* condition code */
107 #define TD_CC_MASK      0xf
108 #define TD_CC           (TD_CC_MASK << TD_CC_SHIFT)
109 #define TD_CC_GET(x)    (((x) >> TD_CC_SHIFT) & TD_CC_MASK)
110
111 #define TD_EC_SHIFT     25                      /* error count */
112 #define TD_EC_MASK      0x3
113 #define TD_EC           (TD_EC_MASK << TD_EC_SHIFT)
114 #define TD_EC_GET(x)    ((x >> TD_EC_SHIFT) & TD_EC_MASK)
115 #define TD_T_SHIFT      23                      /* data toggle state */
116 #define TD_T_MASK       0x3
117 #define TD_T            (TD_T_MASK << TD_T_SHIFT)
118 #define TD_T_DATA0      (0x2 << TD_T_SHIFT)     /* DATA0 */
119 #define TD_T_DATA1      (0x3 << TD_T_SHIFT)     /* DATA1 */
120 #define TD_T_CARRY      (0x0 << TD_T_SHIFT)     /* uses ED_C */
121 #define TD_T_GET(x)     (((x) >> TD_T_SHIFT) & TD_T_MASK)
122 #define TD_DP_SHIFT     21                      /* direction/pid */
123 #define TD_DP_MASK      0x3
124 #define TD_DP           (TD_DP_MASK << TD_DP_SHIFT)
125 #define TD_DP_SETUP     (0x0 << TD_DP_SHIFT)    /* SETUP pid */
126 #define TD_DP_OUT       (0x1 << TD_DP_SHIFT)    /* OUT pid */
127 #define TD_DP_IN        (0x2 << TD_DP_SHIFT)    /* IN pid */
128 #define TD_DP_GET(x)    (((x) >> TD_DP_SHIFT) & TD_DP_MASK)
129 #define TD_ISI_SHIFT    8                       /* Interrupt Service Interval */
130 #define TD_ISI_MASK     0x3f
131 #define TD_ISI_GET(x)   (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK)
132 #define TD_FN_MASK      0x3f                    /* frame number */
133 #define TD_FN_GET(x)    ((x) & TD_FN_MASK)
134
135         __hc32          hwDBP;          /* Data Buffer Pointer (or 0) */
136         __hc32          hwCBL;          /* Controller/Buffer Length */
137
138         /* hwCBL bits */
139 #define TD_BL_MASK      0xffff          /* buffer length */
140 #define TD_BL_GET(x)    ((x) & TD_BL_MASK)
141 #define TD_IE           (1 << 16)       /* interrupt enable */
142         __hc32          hwNextTD;       /* Next TD Pointer */
143
144         /* rest are purely for the driver's use */
145         __u8            index;
146 /*      struct ed       *ed;*/
147         struct urb      *urb;
148
149         dma_addr_t      td_dma;         /* addr of this TD */
150         dma_addr_t      data_dma;       /* addr of data it points to */
151
152 } __attribute__ ((aligned(TD_ALIGN)));  /* c/b/i need 16; only iso needs 32 */
153
154 /*
155  * Hardware transfer status codes -- CC from td->hwINFO
156  */
157 #define TD_CC_NOERROR           0x00
158 #define TD_CC_CRC               0x01
159 #define TD_CC_BITSTUFFING       0x02
160 #define TD_CC_DATATOGGLEM       0x03
161 #define TD_CC_STALL             0x04
162 #define TD_CC_DEVNOTRESP        0x05
163 #define TD_CC_PIDCHECKFAIL      0x06
164 #define TD_CC_UNEXPECTEDPID     0x07
165 #define TD_CC_DATAOVERRUN       0x08
166 #define TD_CC_DATAUNDERRUN      0x09
167     /* 0x0A, 0x0B reserved for hardware */
168 #define TD_CC_BUFFEROVERRUN     0x0C
169 #define TD_CC_BUFFERUNDERRUN    0x0D
170     /* 0x0E, 0x0F reserved for HCD */
171 #define TD_CC_HCD0              0x0E
172 #define TD_CC_NOTACCESSED       0x0F
173
174 /*
175  * preshifted status codes
176  */
177 #define TD_SCC_NOTACCESSED      (TD_CC_NOTACCESSED << TD_CC_SHIFT)
178
179
180 /* map OHCI TD status codes (CC) to errno values */
181 static const int cc_to_error [16] = {
182         /* No  Error  */        0,
183         /* CRC Error  */        -EILSEQ,
184         /* Bit Stuff  */        -EPROTO,
185         /* Data Togg  */        -EILSEQ,
186         /* Stall      */        -EPIPE,
187         /* DevNotResp */        -ETIME,
188         /* PIDCheck   */        -EPROTO,
189         /* UnExpPID   */        -EPROTO,
190         /* DataOver   */        -EOVERFLOW,
191         /* DataUnder  */        -EREMOTEIO,
192         /* (for hw)   */        -EIO,
193         /* (for hw)   */        -EIO,
194         /* BufferOver */        -ECOMM,
195         /* BuffUnder  */        -ENOSR,
196         /* (for HCD)  */        -EALREADY,
197         /* (for HCD)  */        -EALREADY
198 };
199
200 #define NUM_INTS        32
201
202 /*
203  * This is the structure of the OHCI controller's memory mapped I/O region.
204  * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
205  * Layout is in section 7 (and appendix B) of the spec.
206  */
207 struct admhcd_regs {
208         __hc32  gencontrol;     /* General Control */
209         __hc32  int_status;     /* Interrupt Status */
210         __hc32  int_enable;     /* Interrupt Enable */
211         __hc32  reserved00;
212         __hc32  host_control;   /* Host General Control */
213         __hc32  reserved01;
214         __hc32  fminterval;     /* Frame Interval */
215         __hc32  fmnumber;       /* Frame Number */
216         __hc32  reserved02;
217         __hc32  reserved03;
218         __hc32  reserved04;
219         __hc32  reserved05;
220         __hc32  reserved06;
221         __hc32  reserved07;
222         __hc32  reserved08;
223         __hc32  reserved09;
224         __hc32  reserved10;
225         __hc32  reserved11;
226         __hc32  reserved12;
227         __hc32  reserved13;
228         __hc32  reserved14;
229         __hc32  reserved15;
230         __hc32  reserved16;
231         __hc32  reserved17;
232         __hc32  reserved18;
233         __hc32  reserved19;
234         __hc32  reserved20;
235         __hc32  reserved21;
236         __hc32  lsthresh;       /* Low Speed Threshold */
237         __hc32  rhdesc;         /* Root Hub Descriptor */
238 #define MAX_ROOT_PORTS  2
239         __hc32  portstatus[MAX_ROOT_PORTS]; /* Port Status */
240         __hc32  hosthead;       /* Host Descriptor Head */
241 } __attribute__ ((aligned(32)));
242
243 /*
244  * General Control register bits
245  */
246 #define ADMHC_CTRL_UHFE (1 << 0)        /* USB Host Function Enable */
247 #define ADMHC_CTRL_SIR  (1 << 1)        /* Software Interrupt request */
248 #define ADMHC_CTRL_DMAA (1 << 2)        /* DMA Arbitration Control */
249 #define ADMHC_CTRL_SR   (1 << 3)        /* Software Reset */
250
251 /*
252  * Host General Control register bits
253  */
254 #define ADMHC_HC_BUSS           0x3             /* USB bus state */
255 #define   ADMHC_BUSS_RESET      0x0
256 #define   ADMHC_BUSS_RESUME     0x1
257 #define   ADMHC_BUSS_OPER       0x2
258 #define   ADMHC_BUSS_SUSPEND    0x3
259 #define ADMHC_HC_DMAE           (1 << 2)        /* DMA enable */
260
261 /*
262  * Interrupt Status/Enable register bits
263  */
264 #define ADMHC_INTR_SOFI (1 << 4)        /* start of frame */
265 #define ADMHC_INTR_RESI (1 << 5)        /* resume detected */
266 #define ADMHC_INTR_BABI (1 << 8)        /* babble detected */
267 #define ADMHC_INTR_INSM (1 << 9)        /* root hub status change */
268 #define ADMHC_INTR_SO   (1 << 10)       /* scheduling overrun */
269 #define ADMHC_INTR_FNO  (1 << 11)       /* frame number overflow */
270 #define ADMHC_INTR_TDC  (1 << 20)       /* transfer descriptor completed */
271 #define ADMHC_INTR_SWI  (1 << 29)       /* software interrupt */
272 #define ADMHC_INTR_FATI (1 << 30)       /* fatal error */
273 #define ADMHC_INTR_INTA (1 << 31)       /* interrupt active */
274
275 #define ADMHC_INTR_MIE  (1 << 31)       /* master interrupt enable */
276
277 /*
278  * SOF Frame Interval register bits
279  */
280 #define ADMHC_SFI_FI_MASK       ((1 << 14)-1)   /* Frame Interval value */
281 #define ADMHC_SFI_FSLDP_SHIFT   16
282 #define ADMHC_SFI_FSLDP_MASK    ((1 << 15)-1)
283 #define ADMHC_SFI_FIT           (1 << 31)       /* Frame Interval Toggle */
284
285 /*
286  * SOF Frame Number register bits
287  */
288 #define ADMHC_SFN_FN_MASK       ((1 << 16)-1)   /* Frame Number Mask */
289 #define ADMHC_SFN_FR_SHIFT      16              /* Frame Remaining Shift */
290 #define ADMHC_SFN_FR_MASK       ((1 << 14)-1)   /* Frame Remaining Mask */
291 #define ADMHC_SFN_FRT           (1 << 31)       /* Frame Remaining Toggle */
292
293 /*
294  * Root Hub Descriptor register bits
295  */
296 #define ADMHC_RH_NUMP   0xff            /* number of ports */
297 #define ADMHC_RH_PSM    (1 << 8)        /* power switching mode */
298 #define ADMHC_RH_NPS    (1 << 9)        /* no power switching */
299 #define ADMHC_RH_OCPM   (1 << 10)       /* over current protection mode */
300 #define ADMHC_RH_NOCP   (1 << 11)       /* no over current protection */
301 #define ADMHC_RH_PPCM   (0xff << 16)    /* port power control */
302
303 #define ADMHC_RH_LPS    (1 << 24)       /* local power switch */
304 #define ADMHC_RH_OCI    (1 << 25)       /* over current indicator */
305
306 /* status change bits */
307 #define ADMHC_RH_LPSC   (1 << 26)       /* local power switch change */
308 #define ADMHC_RH_OCIC   (1 << 27)       /* over current indicator change */
309
310 #define ADMHC_RH_DRWE   (1 << 28)       /* device remote wakeup enable */
311 #define ADMHC_RH_CRWE   (1 << 29)       /* clear remote wakeup enable */
312
313 #define ADMHC_RH_CGP    (1 << 24)       /* clear global power */
314 #define ADMHC_RH_SGP    (1 << 26)       /* set global power */
315
316 /*
317  * Port Status register bits
318  */
319 #define ADMHC_PS_CCS    (1 << 0)        /* current connect status */
320 #define ADMHC_PS_PES    (1 << 1)        /* port enable status */
321 #define ADMHC_PS_PSS    (1 << 2)        /* port suspend status */
322 #define ADMHC_PS_POCI   (1 << 3)        /* port over current indicator */
323 #define ADMHC_PS_PRS    (1 << 4)        /* port reset status */
324 #define ADMHC_PS_PPS    (1 << 8)        /* port power status */
325 #define ADMHC_PS_LSDA   (1 << 9)        /* low speed device attached */
326
327 /* status change bits */
328 #define ADMHC_PS_CSC    (1 << 16)       /* connect status change */
329 #define ADMHC_PS_PESC   (1 << 17)       /* port enable status change */
330 #define ADMHC_PS_PSSC   (1 << 18)       /* port suspend status change */
331 #define ADMHC_PS_OCIC   (1 << 19)       /* over current indicator change */
332 #define ADMHC_PS_PRSC   (1 << 20)       /* port reset status change */
333
334 /* port feature bits */
335 #define ADMHC_PS_CPE    (1 << 0)        /* clear port enable */
336 #define ADMHC_PS_SPE    (1 << 1)        /* set port enable */
337 #define ADMHC_PS_SPS    (1 << 2)        /* set port suspend */
338 #define ADMHC_PS_CPS    (1 << 3)        /* clear suspend status */
339 #define ADMHC_PS_SPR    (1 << 4)        /* set port reset */
340 #define ADMHC_PS_SPP    (1 << 8)        /* set port power */
341 #define ADMHC_PS_CPP    (1 << 9)        /* clear port power */
342
343 /*
344  * the POTPGT value is not defined in the ADMHC, so define a dummy value
345  */
346 #define ADMHC_POTPGT    2               /* in ms */
347
348 /* hcd-private per-urb state */
349 struct urb_priv {
350         struct ed               *ed;
351         struct urb              *urb;
352         struct list_head        pending;        /* URBs on the same ED */
353
354         u32                     td_cnt;         /* # tds in this request */
355         u32                     td_idx;         /* index of the current td */
356         struct td               *td[0];         /* all TDs in this request */
357 };
358
359 #define TD_HASH_SIZE    64    /* power'o'two */
360 /* sizeof (struct td) ~= 64 == 2^6 ... */
361 #define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
362
363 /*
364  * This is the full ADMHCD controller description
365  *
366  * Note how the "proper" USB information is just
367  * a subset of what the full implementation needs. (Linus)
368  */
369
370 struct admhcd {
371         spinlock_t              lock;
372
373         /*
374          * I/O memory used to communicate with the HC (dma-consistent)
375          */
376         struct admhcd_regs __iomem *regs;
377
378         /*
379          * hcd adds to schedule for a live hc any time, but removals finish
380          * only at the start of the next frame.
381          */
382         struct ed               *ed_head;
383         struct ed               *ed_tails[4];
384
385         struct ed               *ed_rm_list;    /* to be removed */
386         struct ed               *periodic[NUM_INTS];    /* shadow int_table */
387
388 #if 0   /* TODO: remove? */
389         /*
390          * OTG controllers and transceivers need software interaction;
391          * other external transceivers should be software-transparent
392          */
393         struct otg_transceiver  *transceiver;
394 #endif
395
396         /*
397          * memory management for queue data structures
398          */
399         struct dma_pool         *td_cache;
400         struct dma_pool         *ed_cache;
401         struct td               *td_hash[TD_HASH_SIZE];
402
403         /*
404          * driver state
405          */
406         int                     num_ports;
407         int                     load[NUM_INTS];
408         u32                     host_control;   /* copy of the host_control reg */
409         unsigned long           next_statechange;       /* suspend/resume */
410         u32                     fminterval;             /* saved register */
411         unsigned                autostop:1;     /* rh auto stopping/stopped */
412
413         unsigned long           flags;          /* for HC bugs */
414 #define OHCI_QUIRK_AMD756       0x01                    /* erratum #4 */
415 #define OHCI_QUIRK_SUPERIO      0x02                    /* natsemi */
416 #define OHCI_QUIRK_INITRESET    0x04                    /* SiS, OPTi, ... */
417 #define OHCI_QUIRK_BE_DESC      0x08                    /* BE descriptors */
418 #define OHCI_QUIRK_BE_MMIO      0x10                    /* BE registers */
419 #define OHCI_QUIRK_ZFMICRO      0x20                    /* Compaq ZFMicro chipset*/
420         // there are also chip quirks/bugs in init logic
421 };
422
423 /* convert between an hcd pointer and the corresponding ahcd_hcd */
424 static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
425 {
426         return (struct admhcd *)(hcd->hcd_priv);
427 }
428 static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
429 {
430         return container_of((void *)ahcd, struct usb_hcd, hcd_priv);
431 }
432
433 /*-------------------------------------------------------------------------*/
434
435 #ifndef DEBUG
436 #define STUB_DEBUG_FILES
437 #endif  /* DEBUG */
438
439 #ifdef DEBUG
440 #       define admhc_dbg(ahcd, fmt, args...) \
441                 printk(KERN_DEBUG "adm5120-hcd: " fmt , ## args )
442 #else
443 #       define admhc_dbg(ahcd, fmt, args...) do { } while (0)
444 #endif
445
446 #define admhc_err(ahcd, fmt, args...) \
447         printk(KERN_ERR "adm5120-hcd: " fmt , ## args )
448 #define ahcd_info(ahcd, fmt, args...) \
449         printk(KERN_INFO "adm5120-hcd: " fmt , ## args )
450 #define admhc_warn(ahcd, fmt, args...) \
451         printk(KERN_WARNING "adm5120-hcd: " fmt , ## args )
452
453 #ifdef ADMHC_VERBOSE_DEBUG
454 #       define admhc_vdbg admhc_dbg
455 #else
456 #       define admhc_vdbg(ahcd, fmt, args...) do { } while (0)
457 #endif
458
459 /*-------------------------------------------------------------------------*/
460
461 /*
462  * While most USB host controllers implement their registers and
463  * in-memory communication descriptors in little-endian format,
464  * a minority (notably the IBM STB04XXX and the Motorola MPC5200
465  * processors) implement them in big endian format.
466  *
467  * In addition some more exotic implementations like the Toshiba
468  * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
469  * they have a different endianness for registers vs. in-memory
470  * descriptors.
471  *
472  * This attempts to support either format at compile time without a
473  * runtime penalty, or both formats with the additional overhead
474  * of checking a flag bit.
475  *
476  * That leads to some tricky Kconfig rules howevber. There are
477  * different defaults based on some arch/ppc platforms, though
478  * the basic rules are:
479  *
480  * Controller type              Kconfig options needed
481  * ---------------              ----------------------
482  * little endian                CONFIG_USB_ADMHC_LITTLE_ENDIAN
483  *
484  * fully big endian             CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_
485  *                              CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
486  *
487  * mixed endian                 CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_
488  *                              CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
489  *
490  * (If you have a mixed endian controller, you -must- also define
491  * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building
492  * both your mixed endian and a fully big endian controller support in
493  * the same kernel image).
494  */
495
496 #ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC
497 #ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
498 #define big_endian_desc(ahcd)   (ahcd->flags & OHCI_QUIRK_BE_DESC)
499 #else
500 #define big_endian_desc(ahcd)   1               /* only big endian */
501 #endif
502 #else
503 #define big_endian_desc(ahcd)   0               /* only little endian */
504 #endif
505
506 #ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
507 #ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
508 #define big_endian_mmio(ahcd)   (ahcd->flags & OHCI_QUIRK_BE_MMIO)
509 #else
510 #define big_endian_mmio(ahcd)   1               /* only big endian */
511 #endif
512 #else
513 #define big_endian_mmio(ahcd)   0               /* only little endian */
514 #endif
515
516 /*
517  * Big-endian read/write functions are arch-specific.
518  * Other arches can be added if/when they're needed.
519  *
520  * REVISIT: arch/powerpc now has readl/writel_be, so the
521  * definition below can die once the STB04xxx support is
522  * finally ported over.
523  */
524 #if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
525 #define readl_be(addr)          in_be32((__force unsigned *)addr)
526 #define writel_be(val, addr)    out_be32((__force unsigned *)addr, val)
527 #endif
528
529 static inline unsigned int admhc_readl(const struct admhcd *ahcd,
530         __hc32 __iomem *regs)
531 {
532 #ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
533         return big_endian_mmio(ahcd) ?
534                 readl_be(regs) :
535                 readl(regs);
536 #else
537         return readl(regs);
538 #endif
539 }
540
541 static inline void admhc_writel(const struct admhcd *ahcd,
542         const unsigned int val, __hc32 __iomem *regs)
543 {
544 #ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
545         big_endian_mmio(ahcd) ?
546                 writel_be(val, regs) :
547                 writel(val, regs);
548 #else
549                 writel(val, regs);
550 #endif
551 }
552
553 /*-------------------------------------------------------------------------*/
554
555 /* cpu to ahcd */
556 static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x)
557 {
558         return big_endian_desc(ahcd) ?
559                 (__force __hc16)cpu_to_be16(x) :
560                 (__force __hc16)cpu_to_le16(x);
561 }
562
563 static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x)
564 {
565         return big_endian_desc(ahcd) ?
566                 cpu_to_be16p(x) :
567                 cpu_to_le16p(x);
568 }
569
570 static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x)
571 {
572         return big_endian_desc(ahcd) ?
573                 (__force __hc32)cpu_to_be32(x) :
574                 (__force __hc32)cpu_to_le32(x);
575 }
576
577 static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x)
578 {
579         return big_endian_desc(ahcd) ?
580                 cpu_to_be32p(x) :
581                 cpu_to_le32p(x);
582 }
583
584 /* ahcd to cpu */
585 static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x)
586 {
587         return big_endian_desc(ahcd) ?
588                 be16_to_cpu((__force __be16)x) :
589                 le16_to_cpu((__force __le16)x);
590 }
591
592 static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x)
593 {
594         return big_endian_desc(ahcd) ?
595                 be16_to_cpup((__force __be16 *)x) :
596                 le16_to_cpup((__force __le16 *)x);
597 }
598
599 static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x)
600 {
601         return big_endian_desc(ahcd) ?
602                 be32_to_cpu((__force __be32)x) :
603                 le32_to_cpu((__force __le32)x);
604 }
605
606 static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x)
607 {
608         return big_endian_desc(ahcd) ?
609                 be32_to_cpup((__force __be32 *)x) :
610                 le32_to_cpup((__force __le32 *)x);
611 }
612
613 /*-------------------------------------------------------------------------*/
614
615 static inline u16 admhc_frame_no(const struct admhcd *ahcd)
616 {
617         u32     t;
618
619         t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK;
620         return (u16)t;
621 }
622
623 static inline u16 admhc_frame_remain(const struct admhcd *ahcd)
624 {
625         u32     t;
626
627         t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT;
628         t &= ADMHC_SFN_FR_MASK;
629         return (u16)t;
630 }
631
632 /*-------------------------------------------------------------------------*/
633
634 static inline void admhc_disable(struct admhcd *ahcd)
635 {
636         admhcd_to_hcd(ahcd)->state = HC_STATE_HALT;
637 }
638
639 #define FI                      0x2edf          /* 12000 bits per frame (-1) */
640 #define FSLDP(fi)               (0x7fff & ((6 * ((fi) - 1200)) / 7))
641 #define FIT                     ADMHC_SFI_FIT
642 #define LSTHRESH                0x628           /* lowspeed bit threshold */
643
644 static inline void periodic_reinit(struct admhcd *ahcd)
645 {
646         u32     fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
647
648         /* TODO: adjust FSLargestDataPacket value too? */
649         admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
650                                         &ahcd->regs->fminterval);
651 }
652
653 static inline u32 admhc_read_rhdesc(struct admhcd *ahcd)
654 {
655         return admhc_readl(ahcd, &ahcd->regs->rhdesc);
656 }
657
658 static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port)
659 {
660         return admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
661 }
662
663 static inline void admhc_write_portstatus(struct admhcd *ahcd, int port,
664                 u32 value)
665 {
666         admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]);
667 }
668
669 static inline void roothub_write_status(struct admhcd *ahcd, u32 value)
670 {
671         /* FIXME: read-only bits must be masked out */
672         admhc_writel(ahcd, value, &ahcd->regs->rhdesc);
673 }
674
675 static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints)
676 {
677         u32     t;
678
679         t = admhc_readl(ahcd, &ahcd->regs->int_enable);
680         t &= ~(ints);
681         admhc_writel(ahcd, t, &ahcd->regs->int_enable);
682         /* TODO: flush writes ?*/
683 }
684
685 static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints)
686 {
687         u32     t;
688
689         t = admhc_readl(ahcd, &ahcd->regs->int_enable);
690         t |= ints;
691         admhc_writel(ahcd, t, &ahcd->regs->int_enable);
692         /* TODO: flush writes ?*/
693 }
694
695 static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints)
696 {
697         admhc_writel(ahcd, ints, &ahcd->regs->int_status);
698 }
699
700 static inline void admhc_dma_enable(struct admhcd *ahcd)
701 {
702         u32 t;
703
704         t = admhc_readl(ahcd, &ahcd->regs->host_control);
705         if (t & ADMHC_HC_DMAE)
706                 return;
707
708         t |= ADMHC_HC_DMAE;
709         admhc_writel(ahcd, t, &ahcd->regs->host_control);
710         admhc_vdbg(ahcd,"DMA enabled\n");
711 }
712
713 static inline void admhc_dma_disable(struct admhcd *ahcd)
714 {
715         u32 t;
716
717         t = admhc_readl(ahcd, &ahcd->regs->host_control);
718         if (!(t & ADMHC_HC_DMAE))
719                 return;
720
721         t &= ~ADMHC_HC_DMAE;
722         admhc_writel(ahcd, t, &ahcd->regs->host_control);
723         admhc_vdbg(ahcd,"DMA disabled\n");
724 }