2 * ADM5120 HCD (Host Controller Driver) for USB
4 * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
6 * This file was derived from: drivers/usb/host/ohci-hcd.c
7 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
8 * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
10 * [ Initialisation is based on Linus' ]
11 * [ uhci code and gregs ahcd fragments ]
12 * [ (C) Copyright 1999 Linus Torvalds ]
13 * [ (C) Copyright 1999 Gregory P. Smith]
15 * This file is licenced under the GPL.
18 #include <linux/module.h>
19 #include <linux/moduleparam.h>
20 #include <linux/pci.h>
21 #include <linux/kernel.h>
22 #include <linux/delay.h>
23 #include <linux/ioport.h>
24 #include <linux/sched.h>
25 #include <linux/slab.h>
26 #include <linux/errno.h>
27 #include <linux/init.h>
28 #include <linux/timer.h>
29 #include <linux/list.h>
30 #include <linux/usb.h>
31 #include <linux/usb/otg.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/dmapool.h>
34 #include <linux/reboot.h>
38 #include <asm/system.h>
39 #include <asm/unaligned.h>
40 #include <asm/byteorder.h>
42 #include "../core/hcd.h"
43 #include "../core/hub.h"
45 #define DRIVER_VERSION "0.14.1"
46 #define DRIVER_AUTHOR "Gabor Juhos <juhosg at openwrt.org>"
47 #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver"
49 /*-------------------------------------------------------------------------*/
51 #undef ADMHC_VERBOSE_DEBUG /* not always helpful */
53 /* For initializing controller (mask in an HCFS mode too) */
54 #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
56 #define ADMHC_INTR_INIT \
57 ( ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
58 | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI )
60 /*-------------------------------------------------------------------------*/
62 static const char hcd_name [] = "admhc-hcd";
64 #define STATECHANGE_DELAY msecs_to_jiffies(300)
68 static void admhc_dump(struct admhcd *ahcd, int verbose);
69 static int admhc_init(struct admhcd *ahcd);
70 static void admhc_stop(struct usb_hcd *hcd);
72 #include "adm5120-dbg.c"
73 #include "adm5120-mem.c"
74 #include "adm5120-pm.c"
75 #include "adm5120-hub.c"
76 #include "adm5120-q.c"
78 /*-------------------------------------------------------------------------*/
81 * queue up an urb for anything except the root hub
83 static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
84 struct urb *urb, gfp_t mem_flags)
86 struct admhcd *ahcd = hcd_to_admhcd(hcd);
88 struct urb_priv *urb_priv;
89 unsigned int pipe = urb->pipe;
94 #ifdef ADMHC_VERBOSE_DEBUG
95 spin_lock_irqsave(&ahcd->lock, flags);
96 urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe));
97 spin_unlock_irqrestore(&ahcd->lock, flags);
100 /* every endpoint has an ed, locate and maybe (re)initialize it */
101 ed = ed_get(ahcd, ep, urb->dev, pipe, urb->interval);
105 /* for the private part of the URB we need the number of TDs */
108 if (urb->transfer_buffer_length > TD_DATALEN_MAX)
109 /* td_submit_urb() doesn't yet handle these */
112 /* 1 TD for setup, 1 for ACK, plus ... */
116 /* one TD for every 4096 Bytes (can be upto 8K) */
117 td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
118 /* ... and for any remaining bytes ... */
119 if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
121 /* ... and maybe a zero length packet to wrap it up */
124 else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
125 && (urb->transfer_buffer_length
126 % usb_maxpacket(urb->dev, pipe,
127 usb_pipeout (pipe))) == 0)
132 * for Interrupt IN/OUT transactions, each ED contains
134 * TODO: check transfer_buffer_length?
138 case PIPE_ISOCHRONOUS:
139 /* number of packets from URB */
140 td_cnt = urb->number_of_packets;
144 urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
150 spin_lock_irqsave(&ahcd->lock, flags);
151 /* don't submit to a dead HC */
152 if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
156 if (!HC_IS_RUNNING(hcd->state)) {
161 /* in case of unlink-during-submit */
162 spin_lock(&urb->lock);
163 if (urb->status != -EINPROGRESS) {
164 spin_unlock(&urb->lock);
165 urb->hcpriv = urb_priv;
166 finish_urb(ahcd, urb);
171 /* schedule the ed if needed */
172 if (ed->state == ED_IDLE) {
173 ret = ed_schedule(ahcd, ed);
177 if (ed->type == PIPE_ISOCHRONOUS) {
178 u16 frame = admhc_frame_no(ahcd);
180 /* delay a few frames before the first TD */
181 frame += max_t (u16, 8, ed->interval);
182 frame &= ~(ed->interval - 1);
184 urb->start_frame = frame;
186 /* yes, only URB_ISO_ASAP is supported, and
187 * urb->start_frame is never used as input.
190 } else if (ed->type == PIPE_ISOCHRONOUS)
191 urb->start_frame = ed->last_iso + ed->interval;
193 /* fill the TDs and link them to the ed; and
194 * enable that part of the schedule, if needed
195 * and update count of queued periodic urbs
197 urb->hcpriv = urb_priv;
198 td_submit_urb(ahcd, urb);
200 #ifdef ADMHC_VERBOSE_DEBUG
201 admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
205 spin_unlock(&urb->lock);
208 urb_priv_free(ahcd, urb_priv);
210 spin_unlock_irqrestore(&ahcd->lock, flags);
215 * decouple the URB from the HC queues (TDs, urb_priv); it's
216 * already marked using urb->status. reporting is always done
217 * asynchronously, and we might be dealing with an urb that's
218 * partially transferred, or an ED with other urbs being unlinked.
220 static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
222 struct admhcd *ahcd = hcd_to_admhcd(hcd);
225 spin_lock_irqsave(&ahcd->lock, flags);
227 #ifdef ADMHC_VERBOSE_DEBUG
228 urb_print(ahcd, urb, "DEQUEUE", 1);
231 if (HC_IS_RUNNING(hcd->state)) {
232 struct urb_priv *urb_priv;
234 /* Unless an IRQ completed the unlink while it was being
235 * handed to us, flag it for unlink and giveback, and force
236 * some upcoming INTR_SF to call finish_unlinks()
238 urb_priv = urb->hcpriv;
240 if (urb_priv->ed->state == ED_OPER)
241 start_ed_unlink(ahcd, urb_priv->ed);
245 * with HC dead, we won't respect hc queue pointers
246 * any more ... just clean up every urb's memory.
249 finish_urb(ahcd, urb);
251 spin_unlock_irqrestore(&ahcd->lock, flags);
256 /*-------------------------------------------------------------------------*/
258 /* frees config/altsetting state for endpoints,
259 * including ED memory, dummy TD, and bulk/intr data toggle
262 static void admhc_endpoint_disable(struct usb_hcd *hcd,
263 struct usb_host_endpoint *ep)
265 struct admhcd *ahcd = hcd_to_admhcd(hcd);
267 struct ed *ed = ep->hcpriv;
268 unsigned limit = 1000;
270 /* ASSERT: any requests/urbs are being unlinked */
271 /* ASSERT: nobody can be submitting urbs for this any more */
276 #ifdef ADMHC_VERBOSE_DEBUG
277 spin_lock_irqsave(&ahcd->lock, flags);
278 admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
279 spin_unlock_irqrestore(&ahcd->lock, flags);
283 spin_lock_irqsave(&ahcd->lock, flags);
285 if (!HC_IS_RUNNING(hcd->state)) {
288 finish_unlinks(ahcd, 0);
292 case ED_UNLINK: /* wait for hw to finish? */
293 /* major IRQ delivery trouble loses INTR_SOFI too... */
295 admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
298 spin_unlock_irqrestore(&ahcd->lock, flags);
299 schedule_timeout_uninterruptible(1);
301 case ED_IDLE: /* fully unlinked */
302 if (list_empty(&ed->td_list)) {
303 td_free (ahcd, ed->dummy);
307 /* else FALL THROUGH */
309 /* caller was supposed to have unlinked any requests;
310 * that's not our job. can't recover; must leak ed.
312 admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
313 ed, ep->desc.bEndpointAddress, ed->state,
314 list_empty(&ed->td_list) ? "" : " (has tds)");
315 td_free(ahcd, ed->dummy);
321 spin_unlock_irqrestore(&ahcd->lock, flags);
325 static int admhc_get_frame_number(struct usb_hcd *hcd)
327 struct admhcd *ahcd = hcd_to_admhcd(hcd);
329 return admhc_frame_no(ahcd);
332 static void admhc_usb_reset(struct admhcd *ahcd)
335 ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
336 ahcd->hc_control &= OHCI_CTRL_RWC;
337 admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
340 ahcd->host_control = ADMHC_BUSS_RESET;
341 admhc_writel(ahcd, ahcd->host_control ,&ahcd->regs->host_control);
345 /* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
346 * other cases where the next software may expect clean state from the
347 * "firmware". this is bus-neutral, unlike shutdown() methods.
350 admhc_shutdown(struct usb_hcd *hcd)
354 ahcd = hcd_to_admhcd(hcd);
355 admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
356 admhc_dma_disable(ahcd);
357 admhc_usb_reset(ahcd);
358 /* flush the writes */
359 admhc_writel_flush(ahcd);
362 /*-------------------------------------------------------------------------*
364 *-------------------------------------------------------------------------*/
366 static void admhc_eds_cleanup(struct admhcd *ahcd)
368 if (ahcd->ed_tails[PIPE_INTERRUPT]) {
369 ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
370 ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
373 if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
374 ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
375 ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
378 if (ahcd->ed_tails[PIPE_CONTROL]) {
379 ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
380 ahcd->ed_tails[PIPE_CONTROL] = NULL;
383 if (ahcd->ed_tails[PIPE_BULK]) {
384 ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
385 ahcd->ed_tails[PIPE_BULK] = NULL;
388 ahcd->ed_head = NULL;
391 #define ED_DUMMY_INFO (ED_SPEED_FULL | ED_SKIP)
393 static int admhc_eds_init(struct admhcd *ahcd)
397 ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
401 ahcd->ed_tails[PIPE_INTERRUPT] = ed;
403 ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
407 ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
408 ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
409 ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
410 ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
412 ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
416 ahcd->ed_tails[PIPE_CONTROL] = ed;
417 ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
418 ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
419 ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
421 ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
425 ahcd->ed_tails[PIPE_BULK] = ed;
426 ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
427 ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
428 ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
430 ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
432 #ifdef ADMHC_VERBOSE_DEBUG
433 admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
434 admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
435 admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
436 admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
442 admhc_eds_cleanup(ahcd);
446 /* init memory, and kick BIOS/SMM off */
448 static int admhc_init(struct admhcd *ahcd)
450 struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
454 ahcd->regs = hcd->regs;
456 /* Disable HC interrupts */
457 admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
459 /* Read the number of ports unless overridden */
460 if (ahcd->num_ports == 0)
461 ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
463 ret = admhc_mem_init(ahcd);
467 /* init dummy endpoints */
468 ret = admhc_eds_init(ahcd);
472 create_debug_files(ahcd);
481 /*-------------------------------------------------------------------------*/
483 /* Start an OHCI controller, set the BUS operational
484 * resets USB and controller
487 static int admhc_run(struct admhcd *ahcd)
490 int first = ahcd->fminterval == 0;
491 struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
495 /* boot firmware should have set this up (5.1.1.3.1) */
497 temp = admhc_readl(ahcd, &ahcd->regs->fminterval);
498 ahcd->fminterval = temp & ADMHC_SFI_FI_MASK;
499 if (ahcd->fminterval != FI)
500 admhc_dbg(ahcd, "fminterval delta %d\n",
501 ahcd->fminterval - FI);
503 (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
504 /* also: power/overcurrent flags in rhdesc */
507 #if 0 /* TODO: not applicable */
508 /* Reset USB nearly "by the book". RemoteWakeupConnected was
509 * saved if boot firmware (BIOS/SMM/...) told us it's connected,
510 * or if bus glue did the same (e.g. for PCI add-in cards with
513 if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0
514 && !device_may_wakeup(hcd->self.controller))
515 device_init_wakeup(hcd->self.controller, 1);
518 switch (ahcd->host_control & ADMHC_HC_BUSS) {
519 case ADMHC_BUSS_OPER:
522 case ADMHC_BUSS_SUSPEND:
524 case ADMHC_BUSS_RESUME:
525 ahcd->host_control = ADMHC_BUSS_RESUME;
526 temp = 10 /* msec wait */;
528 /* case ADMHC_BUSS_RESET: */
530 ahcd->host_control = ADMHC_BUSS_RESET;
531 temp = 50 /* msec wait */;
534 admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
536 /* flush the writes */
537 admhc_writel_flush(ahcd);
540 temp = admhc_read_rhdesc(ahcd);
541 if (!(temp & ADMHC_RH_NPS)) {
542 /* power down each port */
543 for (temp = 0; temp < ahcd->num_ports; temp++)
544 admhc_write_portstatus(ahcd, temp, ADMHC_PS_CPP);
546 /* flush those writes */
547 admhc_writel_flush(ahcd);
549 /* 2msec timelimit here means no irqs/preempt */
550 spin_lock_irq(&ahcd->lock);
552 admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol);
553 temp = 30; /* ... allow extra time */
554 while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
556 spin_unlock_irq(&ahcd->lock);
557 admhc_err(ahcd, "USB HC reset timed out!\n");
563 /* enable HOST mode, before access any host specific register */
564 admhc_writel(ahcd, ADMHC_CTRL_UHFE, &ahcd->regs->gencontrol);
566 /* Tell the controller where the descriptor list is */
567 admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
569 periodic_reinit(ahcd);
571 /* use rhsc irqs after khubd is fully initialized */
573 hcd->uses_new_polling = 1;
576 /* wake on ConnectStatusChange, matching external hubs */
577 admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
579 /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
582 /* Choose the interrupts we care about now, others later on demand */
583 admhc_intr_ack(ahcd, ~0);
584 admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
586 admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
588 /* flush those writes */
589 admhc_writel_flush(ahcd);
591 /* start controller operations */
592 ahcd->host_control = ADMHC_BUSS_OPER;
593 admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
596 while ((admhc_readl(ahcd, &ahcd->regs->host_control)
597 & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
599 spin_unlock_irq(&ahcd->lock);
600 admhc_err(ahcd, "unable to setup operational mode!\n");
606 hcd->state = HC_STATE_RUNNING;
608 ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
611 /* FIXME: enabling DMA is always failed here for an unknown reason */
612 admhc_dma_enable(ahcd);
615 while ((admhc_readl(ahcd, &ahcd->regs->host_control)
616 & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
618 spin_unlock_irq(&ahcd->lock);
619 admhc_err(ahcd, "unable to enable DMA!\n");
628 spin_unlock_irq(&ahcd->lock);
630 mdelay(ADMHC_POTPGT);
635 /*-------------------------------------------------------------------------*/
637 /* an interrupt happens */
639 static irqreturn_t admhc_irq(struct usb_hcd *hcd)
641 struct admhcd *ahcd = hcd_to_admhcd(hcd);
642 struct admhcd_regs __iomem *regs = ahcd->regs;
645 ints = admhc_readl(ahcd, ®s->int_status);
646 if ((ints & ADMHC_INTR_INTA) == 0) {
647 /* no unmasked interrupt status is set */
651 ints &= admhc_readl(ahcd, ®s->int_enable);
653 if (ints & ADMHC_INTR_FATI) {
654 /* e.g. due to PCI Master/Target Abort */
656 admhc_err(ahcd, "Fatal Error, controller disabled\n");
658 admhc_usb_reset(ahcd);
661 if (ints & ADMHC_INTR_BABI) {
662 admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
663 admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
664 admhc_err(ahcd, "Babble Detected\n");
667 if (ints & ADMHC_INTR_INSM) {
668 admhc_vdbg(ahcd, "Root Hub Status Change\n");
669 ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
670 admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
672 /* NOTE: Vendors didn't always make the same implementation
673 * choices for RHSC. Many followed the spec; RHSC triggers
674 * on an edge, like setting and maybe clearing a port status
675 * change bit. With others it's level-triggered, active
676 * until khubd clears all the port status change bits. We'll
677 * always disable it here and rely on polling until khubd
680 admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
681 usb_hcd_poll_rh_status(hcd);
682 } else if (ints & ADMHC_INTR_RESI) {
683 /* For connect and disconnect events, we expect the controller
684 * to turn on RHSC along with RD. But for remote wakeup events
685 * this might not happen.
687 admhc_vdbg(ahcd, "Resume Detect\n");
688 admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
690 if (ahcd->autostop) {
691 spin_lock(&ahcd->lock);
692 admhc_rh_resume(ahcd);
693 spin_unlock(&ahcd->lock);
695 usb_hcd_resume_root_hub(hcd);
698 if (ints & ADMHC_INTR_TDC) {
699 admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
700 admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
701 if (HC_IS_RUNNING(hcd->state))
702 admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
703 spin_lock(&ahcd->lock);
704 admhc_td_complete(ahcd);
705 spin_unlock(&ahcd->lock);
706 if (HC_IS_RUNNING(hcd->state))
707 admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
710 if (ints & ADMHC_INTR_SO) {
711 /* could track INTR_SO to reduce available PCI/... bandwidth */
712 admhc_vdbg(ahcd, "Schedule Overrun\n");
716 spin_lock(&ahcd->lock);
717 if (ahcd->ed_rm_list)
718 finish_unlinks(ahcd, admhc_frame_no(ahcd));
720 if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
721 && HC_IS_RUNNING(hcd->state))
722 admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
723 spin_unlock(&ahcd->lock);
725 if (ints & ADMHC_INTR_SOFI) {
726 admhc_vdbg(ahcd, "Start Of Frame\n");
727 spin_lock(&ahcd->lock);
729 /* handle any pending ED removes */
730 finish_unlinks(ahcd, admhc_frameno(ahcd));
732 /* leaving INTR_SOFI enabled when there's still unlinking
733 * to be done in the (next frame).
735 if ((ahcd->ed_rm_list == NULL) ||
736 HC_IS_RUNNING(hcd->state) == 0)
738 * disable INTR_SOFI if there are no unlinking to be
739 * done (in the next frame)
741 admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
743 spin_unlock(&ahcd->lock);
747 if (HC_IS_RUNNING(hcd->state)) {
748 admhc_intr_ack(ahcd, ints);
749 admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
750 admhc_writel_flush(ahcd);
756 /*-------------------------------------------------------------------------*/
758 static void admhc_stop(struct usb_hcd *hcd)
760 struct admhcd *ahcd = hcd_to_admhcd(hcd);
764 flush_scheduled_work();
766 admhc_usb_reset(ahcd);
767 admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
769 free_irq(hcd->irq, hcd);
772 remove_debug_files(ahcd);
773 admhc_eds_cleanup(ahcd);
774 admhc_mem_cleanup(ahcd);
777 /*-------------------------------------------------------------------------*/
779 #ifdef CONFIG_MIPS_ADM5120
780 #include "adm5120-drv.c"
781 #define PLATFORM_DRIVER usb_hcd_adm5120_driver
784 #if !defined(PLATFORM_DRIVER)
785 #error "missing bus glue for admhc-hcd"
788 #define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
790 static int __init admhc_hcd_mod_init(void)
797 pr_info("%s: " DRIVER_INFO "\n", hcd_name);
798 pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
799 sizeof (struct ed), sizeof (struct td));
801 #ifdef PLATFORM_DRIVER
802 ret = platform_driver_register(&PLATFORM_DRIVER);
809 #ifdef PLATFORM_DRIVER
810 platform_driver_unregister(&PLATFORM_DRIVER);
815 module_init(admhc_hcd_mod_init);
817 static void __exit admhc_hcd_mod_exit(void)
819 platform_driver_unregister(&PLATFORM_DRIVER);
821 module_exit(admhc_hcd_mod_exit);
823 MODULE_AUTHOR(DRIVER_AUTHOR);
824 MODULE_DESCRIPTION(DRIVER_INFO);
825 MODULE_VERSION(DRIVER_VERSION);
826 MODULE_LICENSE("GPL");