2 * OHCI HCD (Host Controller Driver) for USB.
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
7 * [ Initialisation is based on Linus' ]
8 * [ uhci code and gregs ahcd fragments ]
9 * [ (C) Copyright 1999 Linus Torvalds ]
10 * [ (C) Copyright 1999 Gregory P. Smith]
13 * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
14 * interfaces (though some non-x86 Intel chips use it). It supports
15 * smarter hardware than UHCI. A download link for the spec available
16 * through the http://www.usb.org website.
18 * This file is licenced under the GPL.
21 #include <linux/module.h>
22 #include <linux/moduleparam.h>
23 #include <linux/pci.h>
24 #include <linux/kernel.h>
25 #include <linux/delay.h>
26 #include <linux/ioport.h>
27 #include <linux/sched.h>
28 #include <linux/slab.h>
29 #include <linux/errno.h>
30 #include <linux/init.h>
31 #include <linux/timer.h>
32 #include <linux/list.h>
33 #include <linux/usb.h>
34 #include <linux/usb/otg.h>
35 #include <linux/dma-mapping.h>
36 #include <linux/dmapool.h>
37 #include <linux/reboot.h>
41 #include <asm/system.h>
42 #include <asm/unaligned.h>
43 #include <asm/byteorder.h>
45 #include "../core/hcd.h"
46 #include "../core/hub.h"
48 #define DRIVER_VERSION "v0.02"
49 #define DRIVER_AUTHOR "Gabor Juhos <juhosg at openwrt.org>"
50 #define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver"
52 /*-------------------------------------------------------------------------*/
54 #define ADMHC_VERBOSE_DEBUG /* not always helpful */
55 #undef LATE_ED_SCHEDULE
57 /* For initializing controller (mask in an HCFS mode too) */
58 #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
60 #define ADMHC_INTR_INIT \
61 ( ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
62 | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI )
64 /*-------------------------------------------------------------------------*/
66 static const char hcd_name [] = "admhc-hcd";
68 #define STATECHANGE_DELAY msecs_to_jiffies(300)
72 static void admhc_dump(struct admhcd *ahcd, int verbose);
73 static int admhc_init(struct admhcd *ahcd);
74 static void admhc_stop(struct usb_hcd *hcd);
76 #include "adm5120-hub.c"
77 #include "adm5120-dbg.c"
78 #include "adm5120-mem.c"
79 #include "adm5120-q.c"
81 /*-------------------------------------------------------------------------*/
84 * queue up an urb for anything except the root hub
86 static int admhc_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep,
87 struct urb *urb, gfp_t mem_flags)
89 struct admhcd *ahcd = hcd_to_admhcd(hcd);
91 struct urb_priv *urb_priv;
92 unsigned int pipe = urb->pipe;
97 #ifdef ADMHC_VERBOSE_DEBUG
98 spin_lock_irqsave(&ahcd->lock, flags);
99 urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe));
100 spin_unlock_irqrestore(&ahcd->lock, flags);
103 /* every endpoint has an ed, locate and maybe (re)initialize it */
104 ed = ed_get(ahcd, ep, urb->dev, pipe, urb->interval);
108 /* for the private part of the URB we need the number of TDs */
111 if (urb->transfer_buffer_length > TD_DATALEN_MAX)
112 /* td_submit_urb() doesn't yet handle these */
115 /* 1 TD for setup, 1 for ACK, plus ... */
117 if (urb->transfer_buffer_length)
121 /* one TD for every 4096 Bytes (can be upto 8K) */
122 td_cnt = urb->transfer_buffer_length / TD_DATALEN_MAX;
123 /* ... and for any remaining bytes ... */
124 if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
126 /* ... and maybe a zero length packet to wrap it up */
129 else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
130 && (urb->transfer_buffer_length
131 % usb_maxpacket(urb->dev, pipe,
132 usb_pipeout (pipe))) == 0)
137 * for Interrupt IN/OUT transactions, each ED contains
139 * TODO: check transfer_buffer_length?
143 case PIPE_ISOCHRONOUS:
144 /* number of packets from URB */
145 td_cnt = urb->number_of_packets;
149 admhc_err(ahcd, "bad EP type %d", ed->type);
153 urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
160 spin_lock_irqsave(&ahcd->lock, flags);
161 /* don't submit to a dead HC */
162 if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
166 if (!HC_IS_RUNNING(hcd->state)) {
171 /* in case of unlink-during-submit */
172 spin_lock(&urb->lock);
173 if (urb->status != -EINPROGRESS) {
174 spin_unlock(&urb->lock);
175 urb->hcpriv = urb_priv;
176 finish_urb(ahcd, urb);
181 if (ed->type == PIPE_ISOCHRONOUS) {
182 if (ed->state == ED_NEW) {
183 u16 frame = admhc_frame_no(ahcd);
185 /* delay a few frames before the first TD */
186 frame += max_t (u16, 8, ed->interval);
187 frame &= ~(ed->interval - 1);
189 urb->start_frame = frame;
191 /* yes, only URB_ISO_ASAP is supported, and
192 * urb->start_frame is never used as input.
195 urb->start_frame = ed->last_iso + ed->interval;
198 urb->hcpriv = urb_priv;
199 td_submit_urb(ahcd, urb_priv->urb);
201 /* append it to the ED's queue */
202 list_add_tail(&urb_priv->pending, &ed->urb_pending);
204 /* schedule the ED */
205 retval = ed_schedule(ahcd, ed);
208 spin_unlock(&urb->lock);
211 urb_priv = urb->hcpriv;
212 urb_priv_free(ahcd, urb_priv);
215 spin_unlock_irqrestore(&ahcd->lock, flags);
220 * decouple the URB from the HC queues (TDs, urb_priv); it's
221 * already marked using urb->status. reporting is always done
222 * asynchronously, and we might be dealing with an urb that's
223 * partially transferred, or an ED with other urbs being unlinked.
225 static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
227 struct admhcd *ahcd = hcd_to_admhcd(hcd);
235 spin_lock_irqsave(&ahcd->lock, flags);
237 #ifdef ADMHC_VERBOSE_DEBUG
238 urb_print(ahcd, urb, "DEQEUE", 1);
241 if (HC_IS_RUNNING(hcd->state)) {
242 /* Unless an IRQ completed the unlink while it was being
243 * handed to us, flag it for unlink and giveback, and force
244 * some upcoming INTR_SF to call finish_unlinks()
246 if (up->ed->urb_active != up) {
247 list_del(&up->pending);
248 finish_urb(ahcd, urb);
250 ed_start_deschedule(ahcd, up->ed);
254 * with HC dead, we won't respect hc queue pointers
255 * any more ... just clean up every urb's memory.
257 if (up->ed->urb_active != up) {
258 list_del(&up->pending);
259 finish_urb(ahcd, urb);
261 finish_urb(ahcd, urb);
262 up->ed->urb_active = NULL;
263 up->ed->state = ED_IDLE;
266 spin_unlock_irqrestore(&ahcd->lock, flags);
271 /*-------------------------------------------------------------------------*/
273 /* frees config/altsetting state for endpoints,
274 * including ED memory, dummy TD, and bulk/intr data toggle
276 static void admhc_endpoint_disable(struct usb_hcd *hcd,
277 struct usb_host_endpoint *ep)
279 struct admhcd *ahcd = hcd_to_admhcd(hcd);
281 struct ed *ed = ep->hcpriv;
282 unsigned limit = 1000;
284 /* ASSERT: any requests/urbs are being unlinked */
285 /* ASSERT: nobody can be submitting urbs for this any more */
290 #ifdef ADMHC_VERBOSE_DEBUG
291 spin_lock_irqsave(&ahcd->lock, flags);
292 admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
293 spin_unlock_irqrestore(&ahcd->lock, flags);
297 spin_lock_irqsave(&ahcd->lock, flags);
299 if (!HC_IS_RUNNING(hcd->state)) {
301 ed->state = ED_UNLINK;
302 admhc_finish_unlinks(ahcd, 0);
306 case ED_UNLINK: /* wait for hw to finish? */
307 /* major IRQ delivery trouble loses INTR_SOFI too... */
309 admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
312 spin_unlock_irqrestore(&ahcd->lock, flags);
313 schedule_timeout_uninterruptible(1);
316 case ED_NEW: /* fully unlinked */
317 if (list_empty(&ed->urb_pending)) {
318 td_free(ahcd, ed->dummy);
322 /* else FALL THROUGH */
324 /* caller was supposed to have unlinked any requests;
325 * that's not our job. can't recover; must leak ed.
327 admhc_err(ahcd, "leak ed %p (#%02x) %s act %p%s\n",
328 ed, ep->desc.bEndpointAddress,
329 ed_statestring(ed->state),
331 list_empty(&ed->urb_pending) ? "" : " (has urbs)");
337 spin_unlock_irqrestore(&ahcd->lock, flags);
341 static int admhc_get_frame(struct usb_hcd *hcd)
343 struct admhcd *ahcd = hcd_to_admhcd(hcd);
345 return admhc_frame_no(ahcd);
348 static void admhc_usb_reset(struct admhcd *ahcd)
350 ahcd->host_control = ADMHC_BUSS_RESET;
351 admhc_writel(ahcd, ahcd->host_control ,&ahcd->regs->host_control);
354 /* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
355 * other cases where the next software may expect clean state from the
356 * "firmware". this is bus-neutral, unlike shutdown() methods.
359 admhc_shutdown(struct usb_hcd *hcd)
363 ahcd = hcd_to_admhcd(hcd);
364 admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
365 admhc_dma_disable(ahcd);
366 admhc_usb_reset(ahcd);
367 /* flush the writes */
368 admhc_writel_flush(ahcd);
371 /*-------------------------------------------------------------------------*
373 *-------------------------------------------------------------------------*/
375 static void admhc_eds_cleanup(struct admhcd *ahcd)
377 if (ahcd->ed_tails[PIPE_INTERRUPT]) {
378 ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
379 ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
382 if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
383 ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
384 ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
387 if (ahcd->ed_tails[PIPE_CONTROL]) {
388 ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
389 ahcd->ed_tails[PIPE_CONTROL] = NULL;
392 if (ahcd->ed_tails[PIPE_BULK]) {
393 ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
394 ahcd->ed_tails[PIPE_BULK] = NULL;
397 ahcd->ed_head = NULL;
400 #define ED_DUMMY_INFO (ED_SPEED_FULL | ED_SKIP)
402 static int admhc_eds_init(struct admhcd *ahcd)
406 ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
410 ahcd->ed_tails[PIPE_INTERRUPT] = ed;
412 ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
416 ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
417 ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
418 ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
419 ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
421 ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
425 ahcd->ed_tails[PIPE_CONTROL] = ed;
426 ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
427 ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
428 ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
430 ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
434 ahcd->ed_tails[PIPE_BULK] = ed;
435 ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
436 ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
437 ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
439 ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
441 #ifdef ADMHC_VERBOSE_DEBUG
442 admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
443 admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
444 admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
445 admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
451 admhc_eds_cleanup(ahcd);
455 /* init memory, and kick BIOS/SMM off */
457 static int admhc_init(struct admhcd *ahcd)
459 struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
463 ahcd->regs = hcd->regs;
465 /* Disable HC interrupts */
466 admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
468 /* Read the number of ports unless overridden */
469 if (ahcd->num_ports == 0)
470 ahcd->num_ports = admhc_get_rhdesc(ahcd) & ADMHC_RH_NUMP;
472 ret = admhc_mem_init(ahcd);
476 /* init dummy endpoints */
477 ret = admhc_eds_init(ahcd);
481 create_debug_files(ahcd);
490 /*-------------------------------------------------------------------------*/
492 /* Start an OHCI controller, set the BUS operational
493 * resets USB and controller
496 static int admhc_run(struct admhcd *ahcd)
499 int first = ahcd->fminterval == 0;
500 struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
504 /* boot firmware should have set this up (5.1.1.3.1) */
506 temp = admhc_readl(ahcd, &ahcd->regs->fminterval);
507 ahcd->fminterval = temp & ADMHC_SFI_FI_MASK;
508 if (ahcd->fminterval != FI)
509 admhc_dbg(ahcd, "fminterval delta %d\n",
510 ahcd->fminterval - FI);
512 (FSLDP (ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
513 /* also: power/overcurrent flags in rhdesc */
516 switch (ahcd->host_control & ADMHC_HC_BUSS) {
517 case ADMHC_BUSS_OPER:
520 case ADMHC_BUSS_SUSPEND:
522 case ADMHC_BUSS_RESUME:
523 ahcd->host_control = ADMHC_BUSS_RESUME;
524 temp = 10 /* msec wait */;
526 /* case ADMHC_BUSS_RESET: */
528 ahcd->host_control = ADMHC_BUSS_RESET;
529 temp = 50 /* msec wait */;
532 admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
534 /* flush the writes */
535 admhc_writel_flush(ahcd);
538 temp = admhc_get_rhdesc(ahcd);
539 if (!(temp & ADMHC_RH_NPS)) {
540 /* power down each port */
541 for (temp = 0; temp < ahcd->num_ports; temp++)
542 admhc_writel(ahcd, ADMHC_PS_CPP,
543 &ahcd->regs->portstatus[temp]);
545 /* flush those writes */
546 admhc_writel_flush(ahcd);
548 /* 2msec timelimit here means no irqs/preempt */
549 spin_lock_irq(&ahcd->lock);
552 admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol);
553 temp = 30; /* ... allow extra time */
554 while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
556 spin_unlock_irq(&ahcd->lock);
557 admhc_err(ahcd, "USB HC reset timed out!\n");
563 /* enable HOST mode, before access any host specific register */
564 admhc_writel(ahcd, ADMHC_CTRL_UHFE, &ahcd->regs->gencontrol);
566 /* Tell the controller where the descriptor list is */
567 admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
569 periodic_reinit(ahcd);
571 /* use rhsc irqs after khubd is fully initialized */
573 hcd->uses_new_polling = 1;
576 /* wake on ConnectStatusChange, matching external hubs */
577 admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
579 /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
582 /* Choose the interrupts we care about now, others later on demand */
583 admhc_intr_ack(ahcd, ~0);
584 admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
586 admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
588 /* flush those writes */
589 admhc_writel_flush(ahcd);
591 /* start controller operations */
592 ahcd->host_control = ADMHC_BUSS_OPER;
593 admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
596 while ((admhc_readl(ahcd, &ahcd->regs->host_control)
597 & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
599 spin_unlock_irq(&ahcd->lock);
600 admhc_err(ahcd, "unable to setup operational mode!\n");
606 hcd->state = HC_STATE_RUNNING;
608 ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
611 /* FIXME: enabling DMA is always failed here for an unknown reason */
612 admhc_dma_enable(ahcd);
615 while ((admhc_readl(ahcd, &ahcd->regs->host_control)
616 & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
618 spin_unlock_irq(&ahcd->lock);
619 admhc_err(ahcd, "unable to enable DMA!\n");
628 spin_unlock_irq(&ahcd->lock);
630 mdelay(ADMHC_POTPGT);
635 /*-------------------------------------------------------------------------*/
637 /* an interrupt happens */
639 static irqreturn_t admhc_irq(struct usb_hcd *hcd)
641 struct admhcd *ahcd = hcd_to_admhcd(hcd);
642 struct admhcd_regs __iomem *regs = ahcd->regs;
645 ints = admhc_readl(ahcd, ®s->int_status);
646 if ((ints & ADMHC_INTR_INTA) == 0) {
647 /* no unmasked interrupt status is set */
651 ints &= admhc_readl(ahcd, ®s->int_enable);
653 spin_lock(&ahcd->lock);
654 if (ints & ADMHC_INTR_FATI) {
655 /* e.g. due to PCI Master/Target Abort */
657 admhc_err(ahcd, "Fatal Error, controller disabled\n");
659 admhc_usb_reset(ahcd);
662 if (ints & ADMHC_INTR_BABI) {
663 admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
664 admhc_err(ahcd, "Babble Detected\n");
666 admhc_usb_reset(ahcd);
669 if (ints & ADMHC_INTR_INSM) {
670 admhc_vdbg(ahcd, "Root Hub Status Change\n");
671 ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
672 admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
674 /* NOTE: Vendors didn't always make the same implementation
675 * choices for RHSC. Many followed the spec; RHSC triggers
676 * on an edge, like setting and maybe clearing a port status
677 * change bit. With others it's level-triggered, active
678 * until khubd clears all the port status change bits. We'll
679 * always disable it here and rely on polling until khubd
682 admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
683 usb_hcd_poll_rh_status(hcd);
684 } else if (ints & ADMHC_INTR_RESI) {
685 /* For connect and disconnect events, we expect the controller
686 * to turn on RHSC along with RD. But for remote wakeup events
687 * this might not happen.
689 admhc_vdbg(ahcd, "Resume Detect\n");
690 admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
692 if (ahcd->autostop) {
693 admhc_rh_resume(ahcd);
695 usb_hcd_resume_root_hub(hcd);
698 if (ints & ADMHC_INTR_TDC) {
699 admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
700 if (HC_IS_RUNNING(hcd->state))
701 admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
702 admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
703 admhc_td_complete(ahcd);
704 if (HC_IS_RUNNING(hcd->state))
705 admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
708 if (ints & ADMHC_INTR_SO) {
709 /* could track INTR_SO to reduce available PCI/... bandwidth */
710 admhc_vdbg(ahcd, "Schedule Overrun\n");
713 if (ints & ADMHC_INTR_SOFI) {
714 admhc_intr_ack(ahcd, ADMHC_INTR_SOFI);
715 /* handle any pending ED removes */
716 admhc_finish_unlinks(ahcd, admhc_frame_no(ahcd));
717 admhc_sof_refill(ahcd);
720 if (HC_IS_RUNNING(hcd->state)) {
721 admhc_intr_ack(ahcd, ints);
722 admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
723 admhc_writel_flush(ahcd);
725 spin_unlock(&ahcd->lock);
730 /*-------------------------------------------------------------------------*/
732 static void admhc_stop(struct usb_hcd *hcd)
734 struct admhcd *ahcd = hcd_to_admhcd(hcd);
738 flush_scheduled_work();
740 admhc_usb_reset(ahcd);
741 admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
743 free_irq(hcd->irq, hcd);
746 remove_debug_files(ahcd);
747 admhc_eds_cleanup(ahcd);
748 admhc_mem_cleanup(ahcd);
751 /*-------------------------------------------------------------------------*/
753 /* must not be called from interrupt context */
757 static int admhc_restart(struct admhcd *ahcd)
761 struct urb_priv *priv;
763 /* mark any devices gone, so they do nothing till khubd disconnects.
764 * recycle any "live" eds/tds (and urbs) right away.
765 * later, khubd disconnect processing will recycle the other state,
766 * (either as disconnect/reconnect, or maybe someday as a reset).
768 spin_lock_irq(&ahcd->lock);
770 usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
771 if (!list_empty(&ahcd->pending))
772 admhc_dbg(ahcd, "abort schedule...\n");
773 list_for_each_entry(priv, &ahcd->pending, pending) {
774 struct urb *urb = priv->td[0]->urb;
775 struct ed *ed = priv->ed;
779 ed->state = ED_UNLINK;
780 ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
781 ed_deschedule (ahcd, ed);
783 ed->ed_next = ahcd->ed_rm_list;
785 ahcd->ed_rm_list = ed;
790 admhc_dbg(ahcd, "bogus ed %p state %d\n",
794 spin_lock(&urb->lock);
795 urb->status = -ESHUTDOWN;
796 spin_unlock(&urb->lock);
798 finish_unlinks(ahcd, 0);
799 spin_unlock_irq(&ahcd->lock);
801 /* paranoia, in case that didn't work: */
803 /* empty the interrupt branches */
804 for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
805 for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
807 /* no EDs to remove */
808 ahcd->ed_rm_list = NULL;
810 /* empty control and bulk lists */
811 ahcd->ed_controltail = NULL;
812 ahcd->ed_bulktail = NULL;
814 if ((temp = admhc_run(ahcd)) < 0) {
815 admhc_err(ahcd, "can't restart, %d\n", temp);
818 /* here we "know" root ports should always stay powered,
819 * and that if we try to turn them back on the root hub
820 * will respond to CSC processing.
824 admhc_writel(ahcd, RH_PS_PSS,
825 &ahcd->regs->portstatus[i]);
826 admhc_dbg(ahcd, "restart complete\n");
832 /*-------------------------------------------------------------------------*/
834 #ifdef CONFIG_MIPS_ADM5120
835 #include "adm5120-drv.c"
836 #define PLATFORM_DRIVER usb_hcd_adm5120_driver
839 #if !defined(PLATFORM_DRIVER)
840 #error "missing bus glue for admhc-hcd"
843 #define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
845 static int __init admhc_hcd_mod_init(void)
852 pr_info("%s: " DRIVER_INFO "\n", hcd_name);
853 pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
854 sizeof (struct ed), sizeof (struct td));
856 #ifdef PLATFORM_DRIVER
857 retval = platform_driver_register(&PLATFORM_DRIVER);
864 #ifdef PLATFORM_DRIVER
865 platform_driver_unregister(&PLATFORM_DRIVER);
870 module_init(admhc_hcd_mod_init);
872 static void __exit admhc_hcd_mod_exit(void)
874 platform_driver_unregister(&PLATFORM_DRIVER);
876 module_exit(admhc_hcd_mod_exit);
878 MODULE_AUTHOR(DRIVER_AUTHOR);
879 MODULE_DESCRIPTION(DRIVER_INFO);
880 MODULE_LICENSE("GPL");