From 2f9f0ec1ff013934a86a7303c9194f6dc05620c3 Mon Sep 17 00:00:00 2001 From: Sebastian Mayr Date: Thu, 20 Dec 2012 18:34:45 +0100 Subject: [PATCH 1/2] lantiq_etop: Change MDIO clock This patch sets the MDC clock to 2.5MHz which fixes the MDIO communication with the ar8316 switch. --- drivers/net/ethernet/lantiq_etop.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index e695f71..fc963f6 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -83,6 +83,7 @@ #define LTQ_GBIT_PMAC_HD_CTL 0x8c #define LTQ_GBIT_P0_CTL 0x4 #define LTQ_GBIT_PMAC_RX_IPG 0xa8 +#define LTQ_GBIT_RGMII_CTL 0x78 #define PMAC_HD_CTL_AS (1 << 19) #define PMAC_HD_CTL_RXSH (1 << 22) @@ -92,6 +93,10 @@ /* Disable MDIO auto polling (0=disable, 1=enable) */ #define PX_CTL_DMDIO 0x00400000 +/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */ +#define MDC_CLOCK_MASK 0xff000000 +#define MDC_CLOCK_OFFSET 24 + /* register information for the gbit's MDIO bus */ #define MDIO_XR9_REQUEST 0x00008000 #define MDIO_XR9_READ 0x00000800 @@ -329,6 +334,9 @@ ltq_etop_gbit_init(struct net_device *dev) /* Due to traffic halt when burst length 8, replace default IPG value with 0x3B */ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG); + /* set mdc clock to 2.5 MHz */ + ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET, + LTQ_GBIT_RGMII_CTL); } static int -- 1.7.11.7