From f02be8f01c2f0e1617cb1735352bc05435593358 Mon Sep 17 00:00:00 2001 From: nbd Date: Thu, 4 Nov 2010 18:55:16 +0000 Subject: ar71xx: Configure WNDR3700 switch LED colors properly (#8103) For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23879 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../ar71xx/base-files/etc/defconfig/wndr3700/network | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'target') diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network index eaf3fec7b6..52260e74e8 100644 --- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network +++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network @@ -32,16 +32,16 @@ config switch_port # the switch and the section does not correspond to a real # switch port. # - # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s - # 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity - # 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; + # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; + # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; + # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); # 14: Link (master); 15: separate register - + option device rtl8366s option port 1 - option led 9 - + option led 6 + config switch_port # Port 2 controls the ORANGE configuration of LEDs for # the switch and the section does not correspond to a real @@ -52,8 +52,7 @@ config switch_port option device rtl8366s option port 2 - option led 6 - + option led 9 config switch_port # Port 5 controls the configuration of the WAN LED and the @@ -67,5 +66,4 @@ config switch_port option device rtl8366s option port 5 - option led 6 - + option led 2 -- cgit v1.2.3