From 4fea8d2283645d50dc58ab28036713f2e16e5082 Mon Sep 17 00:00:00 2001 From: blogic Date: Fri, 2 Oct 2009 08:09:27 +0000 Subject: bump ifxmips to .30 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17817 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ifxmips/Makefile | 7 +- target/linux/ifxmips/base-files/etc/config/network | 27 + target/linux/ifxmips/config-2.6.27 | 191 ---- target/linux/ifxmips/config-2.6.28 | 157 --- target/linux/ifxmips/config-2.6.30 | 164 +++ .../linux/ifxmips/files/arch/mips/ifxmips/board.c | 31 +- .../linux/ifxmips/files/arch/mips/ifxmips/clock.c | 54 +- .../linux/ifxmips/files/arch/mips/ifxmips/setup.c | 2 +- .../linux/ifxmips/files/arch/mips/ifxmips/timer.c | 2 +- .../asm/ifxmips/ifx_peripheral_definitions.h | 119 ++ .../files/arch/mips/include/asm/ifxmips/ifx_ssc.h | 258 +++++ .../mips/include/asm/ifxmips/ifx_ssc_defines.h | 547 +++++++++ .../files/arch/mips/include/asm/ifxmips/ifxmips.h | 516 +++++++++ .../arch/mips/include/asm/ifxmips/ifxmips_dma.h | 195 ++++ .../arch/mips/include/asm/ifxmips/ifxmips_ebu.h | 23 + .../arch/mips/include/asm/ifxmips/ifxmips_gpio.h | 40 + .../arch/mips/include/asm/ifxmips/ifxmips_gptu.h | 155 +++ .../arch/mips/include/asm/ifxmips/ifxmips_irq.h | 74 ++ .../arch/mips/include/asm/ifxmips/ifxmips_led.h | 26 + .../arch/mips/include/asm/ifxmips/ifxmips_mei.h | 270 +++++ .../mips/include/asm/ifxmips/ifxmips_mei_app.h | 116 ++ .../include/asm/ifxmips/ifxmips_mei_app_ioctl.h | 1191 ++++++++++++++++++++ .../mips/include/asm/ifxmips/ifxmips_mei_bsp.h | 308 +++++ .../mips/include/asm/ifxmips/ifxmips_mei_ioctl.h | 734 ++++++++++++ .../mips/include/asm/ifxmips/ifxmips_mei_linux.h | 112 ++ .../arch/mips/include/asm/ifxmips/ifxmips_pmu.h | 32 + .../arch/mips/include/asm/ifxmips/ifxmips_prom.h | 26 + .../files/arch/mips/include/asm/mach-ifxmips/cgu.h | 64 ++ .../arch/mips/include/asm/mach-ifxmips/gpio.h | 105 ++ .../files/arch/mips/include/asm/mach-ifxmips/irq.h | 28 + .../files/arch/mips/include/asm/mach-ifxmips/war.h | 24 + .../ifxmips/files/arch/mips/pci/pci-ifxmips.c | 2 +- .../linux/ifxmips/files/drivers/mtd/maps/ifxmips.c | 6 +- .../linux/ifxmips/files/drivers/net/ifxmips_mii0.c | 23 +- .../ifxmips/files/drivers/watchdog/ifxmips_wdt.c | 2 +- .../asm-mips/ifxmips/ifx_peripheral_definitions.h | 119 -- .../files/include/asm-mips/ifxmips/ifx_ssc.h | 258 ----- .../include/asm-mips/ifxmips/ifx_ssc_defines.h | 547 --------- .../files/include/asm-mips/ifxmips/ifxmips.h | 516 --------- .../files/include/asm-mips/ifxmips/ifxmips_cgu.h | 29 - .../files/include/asm-mips/ifxmips/ifxmips_dma.h | 195 ---- .../files/include/asm-mips/ifxmips/ifxmips_ebu.h | 23 - .../files/include/asm-mips/ifxmips/ifxmips_gpio.h | 40 - .../files/include/asm-mips/ifxmips/ifxmips_gptu.h | 155 --- .../files/include/asm-mips/ifxmips/ifxmips_irq.h | 72 -- .../files/include/asm-mips/ifxmips/ifxmips_led.h | 26 - .../files/include/asm-mips/ifxmips/ifxmips_mei.h | 270 ----- .../include/asm-mips/ifxmips/ifxmips_mei_app.h | 116 -- .../asm-mips/ifxmips/ifxmips_mei_app_ioctl.h | 1191 -------------------- .../include/asm-mips/ifxmips/ifxmips_mei_bsp.h | 308 ----- .../include/asm-mips/ifxmips/ifxmips_mei_ioctl.h | 734 ------------ .../include/asm-mips/ifxmips/ifxmips_mei_linux.h | 112 -- .../files/include/asm-mips/ifxmips/ifxmips_pmu.h | 30 - .../files/include/asm-mips/ifxmips/ifxmips_prom.h | 26 - .../files/include/asm-mips/mach-ifxmips/gpio.h | 105 -- .../files/include/asm-mips/mach-ifxmips/irq.h | 28 - .../files/include/asm-mips/mach-ifxmips/war.h | 24 - .../patches-2.6.27/000-mips-bad-intctl.patch | 34 - .../010-mips_clocksource_init_war.patch | 33 - .../linux/ifxmips/patches-2.6.27/100-board.patch | 72 -- .../linux/ifxmips/patches-2.6.27/110-drivers.patch | 152 --- .../ifxmips/patches-2.6.27/160-cfi-swap.patch | 13 - .../ifxmips/patches-2.6.27/170-dma_hack.patch | 11 - .../ifxmips/patches-2.6.27/200-genirq_fix.patch | 12 - .../patches-2.6.28/000-mips-bad-intctl.patch | 34 - .../010-mips_clocksource_init_war.patch | 33 - .../linux/ifxmips/patches-2.6.28/100-board.patch | 71 -- .../linux/ifxmips/patches-2.6.28/110-drivers.patch | 152 --- .../ifxmips/patches-2.6.28/160-cfi-swap.patch | 13 - .../ifxmips/patches-2.6.28/170-dma_hack.patch | 11 - .../ifxmips/patches-2.6.28/200-genirq_fix.patch | 12 - .../patches-2.6.30/000-mips-bad-intctl.patch | 36 + .../010-mips_clocksource_init_war.patch | 35 + .../linux/ifxmips/patches-2.6.30/100-board.patch | 77 ++ .../linux/ifxmips/patches-2.6.30/110-drivers.patch | 162 +++ .../ifxmips/patches-2.6.30/160-cfi-swap.patch | 15 + .../ifxmips/patches-2.6.30/170-dma_hack.patch | 13 + .../ifxmips/patches-2.6.30/200-genirq_fix.patch | 14 + target/linux/ifxmips/patches-2.6.30/201-atm.patch | 26 + .../ifxmips/patches/000-mips-bad-intctl.patch | 34 - .../patches/010-mips_clocksource_init_war.patch | 65 -- target/linux/ifxmips/patches/100-board.patch | 72 -- target/linux/ifxmips/patches/110-drivers.patch | 149 --- target/linux/ifxmips/patches/160-cfi-swap.patch | 13 - target/linux/ifxmips/patches/170-dma_hack.patch | 11 - 85 files changed, 5592 insertions(+), 6338 deletions(-) create mode 100644 target/linux/ifxmips/base-files/etc/config/network delete mode 100644 target/linux/ifxmips/config-2.6.27 delete mode 100644 target/linux/ifxmips/config-2.6.28 create mode 100644 target/linux/ifxmips/config-2.6.30 create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_peripheral_definitions.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc_defines.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_dma.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_ebu.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gpio.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gptu.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_irq.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_led.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app_ioctl.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_bsp.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_ioctl.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_linux.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_pmu.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_prom.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/cgu.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/gpio.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/irq.h create mode 100644 target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/war.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_peripheral_definitions.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc_defines.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_cgu.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_dma.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_ebu.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gpio.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gptu.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_irq.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_pmu.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_prom.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/gpio.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/irq.h delete mode 100644 target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/war.h delete mode 100644 target/linux/ifxmips/patches-2.6.27/000-mips-bad-intctl.patch delete mode 100644 target/linux/ifxmips/patches-2.6.27/010-mips_clocksource_init_war.patch delete mode 100644 target/linux/ifxmips/patches-2.6.27/100-board.patch delete mode 100644 target/linux/ifxmips/patches-2.6.27/110-drivers.patch delete mode 100644 target/linux/ifxmips/patches-2.6.27/160-cfi-swap.patch delete mode 100644 target/linux/ifxmips/patches-2.6.27/170-dma_hack.patch delete mode 100644 target/linux/ifxmips/patches-2.6.27/200-genirq_fix.patch delete mode 100644 target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch delete mode 100644 target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch delete mode 100644 target/linux/ifxmips/patches-2.6.28/100-board.patch delete mode 100644 target/linux/ifxmips/patches-2.6.28/110-drivers.patch delete mode 100644 target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch delete mode 100644 target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch delete mode 100644 target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/000-mips-bad-intctl.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/010-mips_clocksource_init_war.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/100-board.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/110-drivers.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/160-cfi-swap.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/170-dma_hack.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/200-genirq_fix.patch create mode 100644 target/linux/ifxmips/patches-2.6.30/201-atm.patch delete mode 100644 target/linux/ifxmips/patches/000-mips-bad-intctl.patch delete mode 100644 target/linux/ifxmips/patches/010-mips_clocksource_init_war.patch delete mode 100644 target/linux/ifxmips/patches/100-board.patch delete mode 100644 target/linux/ifxmips/patches/110-drivers.patch delete mode 100644 target/linux/ifxmips/patches/160-cfi-swap.patch delete mode 100644 target/linux/ifxmips/patches/170-dma_hack.patch (limited to 'target') diff --git a/target/linux/ifxmips/Makefile b/target/linux/ifxmips/Makefile index eee0d44e91..7f27b55d35 100644 --- a/target/linux/ifxmips/Makefile +++ b/target/linux/ifxmips/Makefile @@ -9,12 +9,13 @@ include $(TOPDIR)/rules.mk ARCH:=mips BOARD:=ifxmips BOARDNAME:=Infineon Mips -FEATURES:=squashfs jffs2 +FEATURES:=squashfs jffs2 atm -LINUX_VERSION:=2.6.28.10 +LINUX_VERSION:=2.6.30.5 include $(INCLUDE_DIR)/target.mk -DEFAULT_PACKAGES+=uboot-ifxmips hostapd-mini +DEFAULT_PACKAGES+=uboot-ifxmips kmod-pppoa ppp-mod-pppoa linux-atm atm-tools br2684ctl kmod-ifxmips-atm dwc_usb + define Target/Description Build firmware images for Infineon Mips Controllers diff --git a/target/linux/ifxmips/base-files/etc/config/network b/target/linux/ifxmips/base-files/etc/config/network new file mode 100644 index 0000000000..8f5624b4af --- /dev/null +++ b/target/linux/ifxmips/base-files/etc/config/network @@ -0,0 +1,27 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config atm-bridge + option unit 0 + option encaps llc + option vpi 1 + option vci 32 + option payload bridged # some ISPs need this set to 'routed' + +config interface wan + option ifname nas0 + option proto pppoe + option username "" + option password "" + option defaultroute 0 + option unit 1 diff --git a/target/linux/ifxmips/config-2.6.27 b/target/linux/ifxmips/config-2.6.27 deleted file mode 100644 index 8003af5a09..0000000000 --- a/target/linux/ifxmips/config-2.6.27 +++ /dev/null @@ -1,191 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ATM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR2=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_GPIO_DEVICE=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_CLK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_STD_PC_SERIAL_PORT=y -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_IFXMIPS=y -CONFIG_IFXMIPS_EEPROM=y -CONFIG_IFXMIPS_GPIO_RST_BTN=y -# CONFIG_IFXMIPS_MEI is not set -CONFIG_IFXMIPS_MII0=y -# CONFIG_IFXMIPS_PROM_ASC0 is not set -CONFIG_IFXMIPS_PROM_ASC1=y -CONFIG_IFXMIPS_SSC=y -CONFIG_IFXMIPS_WDT=y -# CONFIG_IMAGE_CMDLINE_HACK is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_IFXMIPS=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_IFXMIPS=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_NATSEMI is not set -CONFIG_NF_CT_ACCT=y -# CONFIG_NO_IOPORT is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -# CONFIG_R6040 is not set -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_WAIT_SCAN is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_IFXMIPS=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -# CONFIG_TC35815 is not set -# CONFIG_TICK_ONESHOT is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_USB is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_DWC_HCD is not set -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_ZERO is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_VIDEO_MEDIA is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ifxmips/config-2.6.28 b/target/linux/ifxmips/config-2.6.28 deleted file mode 100644 index a59c46ee8e..0000000000 --- a/target/linux/ifxmips/config-2.6.28 +++ /dev/null @@ -1,157 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR2=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIO_DEVICE=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_IFXMIPS=y -CONFIG_IFXMIPS_EEPROM=y -CONFIG_IFXMIPS_GPIO_RST_BTN=y -# CONFIG_IFXMIPS_MEI is not set -CONFIG_IFXMIPS_MII0=y -# CONFIG_IFXMIPS_PROM_ASC0 is not set -CONFIG_IFXMIPS_PROM_ASC1=y -CONFIG_IFXMIPS_SSC=y -CONFIG_IFXMIPS_WDT=y -# CONFIG_IMAGE_CMDLINE_HACK is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_IFXMIPS=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_EMMA is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_IFXMIPS=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_NATSEMI is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -# CONFIG_R6040 is not set -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_IFXMIPS=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TRAD_SIGNALS=y -CONFIG_USB_SUPPORT=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ifxmips/config-2.6.30 b/target/linux/ifxmips/config-2.6.30 new file mode 100644 index 0000000000..7eefc15328 --- /dev/null +++ b/target/linux/ifxmips/config-2.6.30 @@ -0,0 +1,164 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_BASE_SMALL=0 +# CONFIG_BCM47XX is not set +# CONFIG_BINARY_PRINTF is not set +CONFIG_BITREVERSE=y +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2" +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR2=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_IDE=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_STD_PC_SERIAL_PORT=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_I2C is not set +CONFIG_IFXMIPS=y +# CONFIG_IFXMIPS_EEPROM is not set +CONFIG_IFXMIPS_GPIO_RST_BTN=y +# CONFIG_IFXMIPS_MEI is not set +CONFIG_IFXMIPS_MII0=y +# CONFIG_IFXMIPS_PROM_ASC0 is not set +CONFIG_IFXMIPS_PROM_ASC1=y +# CONFIG_IFXMIPS_SSC is not set +CONFIG_IFXMIPS_WDT=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQ_CPU=y +CONFIG_KALLSYMS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_IFXMIPS=y +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_FPU_EMU is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MIPS_VPE_LOADER is not set +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_IFXMIPS=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_NATSEMI is not set +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_PROM_EMU is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_DMA is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_IFXMIPS=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SLOW_WORK is not set +CONFIG_SWAP_IO_SPACE=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_MULTITHREADING=y +# CONFIG_TC35815 is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB_SUPPORT=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ifxmips/files/arch/mips/ifxmips/board.c b/target/linux/ifxmips/files/arch/mips/ifxmips/board.c index 2a803ff85a..0f05aed057 100644 --- a/target/linux/ifxmips/files/arch/mips/ifxmips/board.c +++ b/target/linux/ifxmips/files/arch/mips/ifxmips/board.c @@ -34,6 +34,7 @@ #include #include #include +#include #define MAX_BOARD_NAME_LEN 32 #define MAX_IFXMIPS_DEVS 9 @@ -132,6 +133,7 @@ static struct gpio_led arv4519_gpio_leds[] = { { .name = "ifx:green:internet", .gpio = 5, .active_low = 1, }, { .name = "ifx:red:internet", .gpio = 8, .active_low = 1, }, { .name = "ifx:green:wlan", .gpio = 6, .active_low = 1, }, + { .name = "ifx:green:usbpwr", .gpio = 14, .active_low = 1, }, { .name = "ifx:green:usb", .gpio = 19, .active_low = 1, }, }; @@ -146,18 +148,41 @@ static struct platform_device ifxmips_gpio_leds = { }; #endif +static struct resource dwc_usb_res[] = { + { + .name = "dwc_usb_membase", + .flags = IORESOURCE_MEM, + .start = 0x1E101000, + .end = 0x1E101FFF + }, + { + .name = "dwc_usb_irq", + .flags = IORESOURCE_IRQ, + .start = IFXMIPS_USB_INT, + } +}; + +static struct platform_device dwc_usb = +{ + .id = 0, + .name = "dwc_usb", + .resource = dwc_usb_res, + .num_resources = ARRAY_SIZE(dwc_usb_res), +}; + struct platform_device *easy50712_devs[] = { &ifxmips_led, &ifxmips_gpio, &ifxmips_mii, - &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev + &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev, &dwc_usb }; struct platform_device *easy4010_devs[] = { &ifxmips_led, &ifxmips_gpio, &ifxmips_mii, - &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev + &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev, &dwc_usb }; struct platform_device *arv5419_devs[] = { - &ifxmips_gpio, &ifxmips_mii, &ifxmips_mtd, &ifxmips_wdt, + &ifxmips_gpio, &ifxmips_mii, &ifxmips_mtd, + &ifxmips_gpio_dev, &ifxmips_wdt, &dwc_usb, #ifdef CONFIG_LEDS_GPIO &ifxmips_gpio_leds, #endif diff --git a/target/linux/ifxmips/files/arch/mips/ifxmips/clock.c b/target/linux/ifxmips/files/arch/mips/ifxmips/clock.c index d44bf44e4f..a8d1984796 100644 --- a/target/linux/ifxmips/files/arch/mips/ifxmips/clock.c +++ b/target/linux/ifxmips/files/arch/mips/ifxmips/clock.c @@ -30,40 +30,7 @@ #include #include #include - -#define BASIC_INPUT_CLOCK_FREQUENCY_1 35328000 -#define BASIC_INPUT_CLOCK_FREQUENCY_2 36000000 - -#define BASIS_INPUT_CRYSTAL_USB 12000000 - -#define GET_BITS(x, msb, lsb) (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) - - -#define CGU_PLL0_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 31)) -#define CGU_PLL0_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 30)) -#define CGU_PLL0_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 28)) -#define CGU_PLL0_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 27)) -#define CGU_PLL1_SRC (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 31)) -#define CGU_PLL1_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 30)) -#define CGU_PLL1_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 28)) -#define CGU_PLL1_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 27)) -#define CGU_PLL2_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 20)) -#define CGU_PLL2_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 19)) -#define CGU_SYS_FPI_SEL (1 << 6) -#define CGU_SYS_DDR_SEL 0x3 -#define CGU_PLL0_SRC (1 << 29) - -#define CGU_PLL0_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 26, 17) -#define CGU_PLL0_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 12, 6) -#define CGU_PLL0_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 5, 2) -#define CGU_PLL1_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 26, 17) -#define CGU_PLL1_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 12, 6) -#define CGU_PLL1_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 5, 2) -#define CGU_PLL2_SRC GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 18, 17) -#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 16, 13) -#define CGU_PLL2_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 12, 6) -#define CGU_PLL2_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 5, 2) -#define CGU_IF_CLK_PCI_CLK GET_BITS(*IFXMIPS_CGU_IF_CLK, 23, 20) +#include static unsigned int cgu_get_pll0_fdiv(void); unsigned int ifxmips_clocks[] = {CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; @@ -185,14 +152,6 @@ unsigned int cgu_get_io_region_clock(void) } } -unsigned int cgu_get_fpi_bus_clock(int fpi) -{ - unsigned int ret = cgu_get_io_region_clock(); - if ((fpi == 2) && (ifxmips_r32(IFXMIPS_CGU_SYS) & CGU_SYS_FPI_SEL)) - ret >>= 1; - return ret; -} - void cgu_setup_pci_clk(int external_clock) { /* set clock to 33Mhz */ @@ -200,7 +159,7 @@ void cgu_setup_pci_clk(int external_clock) IFXMIPS_CGU_IFCCR); ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) | 0x800000, IFXMIPS_CGU_IFCCR); - if (external_clock) { + if (external_clock) { ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) & ~(1 << 16), IFXMIPS_CGU_IFCCR); ifxmips_w32((1 << 30), IFXMIPS_CGU_PCICR); @@ -211,6 +170,15 @@ void cgu_setup_pci_clk(int external_clock) } } +unsigned int cgu_get_fpi_bus_clock(int fpi) +{ + unsigned int ret = cgu_get_io_region_clock(); + if ((fpi == 2) && (ifxmips_r32(IFXMIPS_CGU_SYS) & CGU_SYS_FPI_SEL)) + ret >>= 1; + return ret; +} +EXPORT_SYMBOL(cgu_get_fpi_bus_clock); + unsigned int ifxmips_get_cpu_hz(void) { unsigned int ddr_clock = DDR_HZ; diff --git a/target/linux/ifxmips/files/arch/mips/ifxmips/setup.c b/target/linux/ifxmips/files/arch/mips/ifxmips/setup.c index e571862a47..2ba0592f6d 100644 --- a/target/linux/ifxmips/files/arch/mips/ifxmips/setup.c +++ b/target/linux/ifxmips/files/arch/mips/ifxmips/setup.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #include static unsigned int r4k_offset; diff --git a/target/linux/ifxmips/files/arch/mips/ifxmips/timer.c b/target/linux/ifxmips/files/arch/mips/ifxmips/timer.c index 8d8d431a85..d05df2283c 100644 --- a/target/linux/ifxmips/files/arch/mips/ifxmips/timer.c +++ b/target/linux/ifxmips/files/arch/mips/ifxmips/timer.c @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_peripheral_definitions.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_peripheral_definitions.h new file mode 100644 index 0000000000..5bd788fff6 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_peripheral_definitions.h @@ -0,0 +1,119 @@ +//************************************************************************* +//* Summary of definitions which are used in each peripheral * +//************************************************************************* + +#ifndef peripheral_definitions_h +#define peripheral_definitions_h + +////#include "cpu.h" +// +///* These files have to be included by each peripheral */ +//#include +//#include +//#include +//#include +//#include +//#include "SRAM_address_map.h" +// +///* common header files for all CPU's */ +//#include "iiu.h" +//#include "bcu.h" +//#include "FPI_address_map.h" +//#include "direct_interrupts.h" + +///////////////////////////////////////////////////////////////////////// + +//extern int _clz(); +//extern void _nop(); +//extern void _sleep(); +//extern void sys_enable_int(); + +typedef unsigned char UINT8; +typedef signed char INT8; +typedef unsigned short UINT16; +typedef signed short INT16; +typedef unsigned int UINT32; +typedef signed int INT32; +typedef unsigned long long UINT64; +typedef signed long long INT64; + +#define REG8( addr ) (*(volatile UINT8 *) (addr)) +#define REG16( addr ) (*(volatile UINT16 *)(addr)) +#define REG32( addr ) (*(volatile UINT32 *)(addr)) +#define REG64( addr ) (*(volatile UINT64 *)(addr)) + +/* define routine to set FPI access in Supervisor Mode */ +#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01 +/* Supervisor mode ends, following functions will be done in User mode */ +#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00 +/* Supervisor mode ends, following functions will be done in User mode */ +#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG) +/* Supervisor mode ends, following functions will be done in User mode */ +#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm +/* enable all Interrupts in IIU */ +//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask +///* get all high priority interrupt bits in IIU */ +//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED) +///* signal ends of interrupt to IIU */ +//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit +///* force IIU interrupt register */ +//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data +///* get all bits of interrupt register */ +//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR) +/* insert a NOP instruction */ +#define NOP _nop() +/* CPU goes to power down mode until interrupt occurs */ +#define IFX_CPU_SLEEP _sleep() +/* enable all interrupts to CPU */ +#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int() +/* get all low priority interrupt bits in peripheral */ +#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg) +/* clear low priority interrupt bit in peripheral */ +#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit +/* write FPI bus */ +#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data +#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data +#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data +/* read FPI bus */ +#define READ_FPI_BYTE(addr) REG8(addr) +#define READ_FPI_16BIT(addr) REG16(addr) +#define READ_FPI_32BIT(addr) REG32(addr) +/* write peripheral register */ +#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data +#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data +#else //not CONFIG_CPU_LITTLE_ENDIAN +#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data +#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data +#endif //CONFIG_CPU_LITTLE_ENDIAN + +/* read peripheral register */ +#define READ_PERIPHERAL_REGISTER(addr) REG32(addr) + +/* read/modify(or)/write peripheral register */ +#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data +/* read/modify(and)/write peripheral register */ +#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data + +/* CPU-independent mnemonic constants */ +/* CLC register bits */ +#define IFX_CLC_ENABLE 0x00000000 +#define IFX_CLC_DISABLE 0x00000001 +#define IFX_CLC_DISABLE_STATUS 0x00000002 +#define IFX_CLC_SUSPEND_ENABLE 0x00000004 +#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008 +#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010 +#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020 +#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00 +#define IFX_CLC_RUN_DIVIDER_OFFSET 8 +#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000 +#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16 +#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000 +#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24 + +/* number of cycles to wait for interrupt service routine to be called */ +#define WAIT_CYCLES 50 + +#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */ diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc.h new file mode 100644 index 0000000000..c6dd5d47a9 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc.h @@ -0,0 +1,258 @@ +/* + * ifx_ssc.h defines some data sructures used in ifx_ssc.c + * + * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT) + * + * + */ + +#ifndef __IFX_SSC_H +#define __IFX_SSC_H +#ifdef __KERNEL__ +#include +#endif //__KERNEL__ + +#define PORT_CNT 1 // assume default value + +/* symbolic constants to be used in SSC routines */ + +// ### TO DO: bad performance +#define IFX_SSC_TXFIFO_ITL 1 +#define IFX_SSC_RXFIFO_ITL 1 + +struct ifx_ssc_statistics { + unsigned int abortErr; /* abort error */ + unsigned int modeErr; /* master/slave mode error */ + unsigned int txOvErr; /* TX Overflow error */ + unsigned int txUnErr; /* TX Underrun error */ + unsigned int rxOvErr; /* RX Overflow error */ + unsigned int rxUnErr; /* RX Underrun error */ + unsigned int rxBytes; + unsigned int txBytes; +}; + +struct ifx_ssc_hwopts { + unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */ + unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */ + unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */ + unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */ + unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */ + unsigned int echoMode:1; /* Echo mode */ + unsigned int loopBack:1; /* Loopback mode */ + unsigned int idleValue:1; /* Idle value */ + unsigned int clockPolarity:1; /* Idle clock is high or low */ + unsigned int clockPhase:1; /* Tx on trailing or leading edge */ + unsigned int headingControl:1; /* LSB first or MSB first */ + unsigned int dataWidth:6; /* from 2 up to 32 bits */ + unsigned int masterSelect:1; /* Master or Slave mode */ + unsigned int modeRxTx:2; /* rx/tx mode */ + unsigned int gpoCs:8; /* choose outputs to use for chip select */ + unsigned int gpoInv:8; /* invert GPO outputs */ +}; + +struct ifx_ssc_frm_opts { + bool FrameEnable; // SFCON.SFEN + unsigned int DataLength; // SFCON.DLEN + unsigned int PauseLength; // SFCON.PLEN + unsigned int IdleData; // SFCON.IDAT + unsigned int IdleClock; // SFCON.ICLK + bool StopAfterPause; // SFCON.STOP +}; + +struct ifx_ssc_frm_status { + bool DataBusy; // SFSTAT.DBSY + bool PauseBusy; // SFSTAT.PBSY + unsigned int DataCount; // SFSTAT.DCNT + unsigned int PauseCount; // SFSTAT.PCNT + bool EnIntAfterData; // SFCON.IBEN + bool EnIntAfterPause; // SFCON.IAEN +}; + +typedef struct { + char *buf; + size_t len; +} ifx_ssc_buf_item_t; + +// data structures for batch execution +typedef union { + struct { + bool save_options; + } init; + ifx_ssc_buf_item_t read; + ifx_ssc_buf_item_t write; + ifx_ssc_buf_item_t rd_wr; + unsigned int set_baudrate; + struct ifx_ssc_frm_opts set_frm; + unsigned int set_gpo; + struct ifx_ssc_hwopts set_hwopts; +} ifx_ssc_batch_cmd_param; + +struct ifx_ssc_batch_list { + unsigned int cmd; + ifx_ssc_batch_cmd_param cmd_param; + struct ifx_ssc_batch_list *next; +}; + +#ifdef __KERNEL__ +#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE) + +struct ifx_ssc_port { + unsigned long mapbase; + struct ifx_ssc_hwopts opts; + struct ifx_ssc_statistics stats; + struct ifx_ssc_frm_status frm_status; + struct ifx_ssc_frm_opts frm_opts; + /* wait queue for ifx_ssc_read() */ + wait_queue_head_t rwait, pwait; + int port_nr; + char port_is_open; /* exclusive open - boolean */ +// int no_of_bits; /* number of _valid_ bits */ +// int elem_size; /* shift for element (no of bytes)*/ + /* buffer and pointers to the read/write position */ + char *rxbuf; /* buffer for RX */ + char *rxbuf_end; /* buffer end pointer for RX */ + volatile char *rxbuf_ptr; /* buffer write pointer for RX */ + char *txbuf; /* buffer for TX */ + char *txbuf_end; /* buffer end pointer for TX */ + volatile char *txbuf_ptr; /* buffer read pointer for TX */ + unsigned int baud; + /* each channel has its own interrupts */ + /* (transmit/receive/error/frame) */ + unsigned int txirq, rxirq, errirq, frmirq; +}; +/* default values for SSC configuration */ +// values of CON +#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */ +#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */ +#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */ +#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */ +#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */ +#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */ +#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */ +#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */ +#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST +#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX +// other values +#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */ +#ifdef CONFIG_USE_EMULATOR +#define IFX_SSC_DEF_BAUDRATE 10000 +#else +#define IFX_SSC_DEF_BAUDRATE 2000000 +#endif +#define IFX_SSC_DEF_RMC 0x10 + +#define IFX_SSC_DEF_TXFIFO_FL 8 +#define IFX_SSC_DEF_RXFIFO_FL 1 + +#if 1 //TODO +#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */ +#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */ +#else +#error "what is ur Chip Select???" +#endif +#define IFX_SSC_DEF_SFCON 0 /* no serial framing */ +#if 0 +#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ + IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT +#endif +#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ + IFX_SSC_R_BIT | IFX_SSC_E_BIT +#endif /* __KERNEL__ */ + +// batch execution commands +#define IFX_SSC_BATCH_CMD_INIT 1 +#define IFX_SSC_BATCH_CMD_READ 2 +#define IFX_SSC_BATCH_CMD_WRITE 3 +#define IFX_SSC_BATCH_CMD_RD_WR 4 +#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5 +#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6 +#define IFX_SSC_BATCH_CMD_SET_FRM 7 +#define IFX_SSC_BATCH_CMD_SET_GPO 8 +#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9 +//#define IFX_SSC_BATCH_CMD_ +//#define IFX_SSC_BATCH_CMD_ +#define IFX_SSC_BATCH_CMD_END_EXEC 0 + +/* Macros to configure SSC hardware */ +/* headingControl: */ +#define IFX_SSC_LSB_FIRST 0 +#define IFX_SSC_MSB_FIRST 1 +/* dataWidth: */ +#define IFX_SSC_MIN_DATA_WIDTH 2 +#define IFX_SSC_MAX_DATA_WIDTH 32 +/* master/slave mode select */ +#define IFX_SSC_MASTER_MODE 1 +#define IFX_SSC_SLAVE_MODE 0 +/* rx/tx mode */ +// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h +#define IFX_SSC_MODE_RXTX 0 +#define IFX_SSC_MODE_RX 1 +#define IFX_SSC_MODE_TX 2 +#define IFX_SSC_MODE_OFF 3 +#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX + +/* GPO values */ +#define IFX_SSC_MAX_GPO_OUT 7 + +#define IFX_SSC_RXREQ_BLOCK_SIZE 32768 + +/***********************/ +/* defines for ioctl's */ +/***********************/ +#define IFX_SSC_IOCTL_MAGIC 'S' +/* read out the statistics */ +#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics) +/* clear the statistics */ +#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2) +/* set the baudrate */ +#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int) +/* get the current baudrate */ +#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int) +/* set hardware options */ +#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts) +/* get the current hardware options */ +#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts) +/* set transmission mode */ +#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int) +/* get the current transmission mode */ +#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int) +/* abort transmission */ +#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9) +#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9) + +/* set general purpose outputs */ +#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int) +/* clear general purpose outputs */ +#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int) +/* get general purpose outputs */ +#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int) + +/*** serial framing ***/ +/* get status of serial framing */ +#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status) +/* get counter reload values and control bits */ +#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts) +/* set counter reload values and control bits */ +#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts) + +/*** batch execution ***/ +/* do batch execution */ +#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list) + +#ifdef __KERNEL__ +// routines from ifx_ssc.c +// ### TO DO +/* kernel interface for read and write */ +ssize_t ifx_ssc_kread (int, char *, size_t); +ssize_t ifx_ssc_kwrite (int, const char *, size_t); + +#ifdef CONFIG_IFX_VP_KERNEL_TEST +void ifx_ssc_tc (void); +#endif // CONFIG_IFX_VP_KERNEL_TEST + +#endif //__KERNEL__ +#endif // __IFX_SSC_H diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc_defines.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc_defines.h new file mode 100644 index 0000000000..805d48ad84 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc_defines.h @@ -0,0 +1,547 @@ +#ifndef IFX_SSC_DEFINES_H +#define IFX_SSC_DEFINES_H + +#include "ifx_peripheral_definitions.h" + +/* maximum SSC FIFO size */ +#define IFX_SSC_MAX_FIFO_SIZE 32 + +/* register map of SSC */ + +/* address of the Clock Control Register of the SSC */ +#define IFX_SSC_CLC 0x00000000 +/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0 + bit 1 is hardware modified*/ +#define IFX_SSC_CLC_readmask 0x00FFFFEF +#define IFX_SSC_CLC_writemask 0x00FFFF3D +#define IFX_SSC_CLC_hwmask 0x00000002 +#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask) + +/* address of Port Input Select Register of the SSC */ +#define IFX_SSC_PISEL 0x00000004 +/* IFX_SSC_PISEL register is significant in lowest three bits only */ +#define IFX_SSC_PISEL_readmask 0x00000007 +#define IFX_SSC_PISEL_writemask 0x00000007 +#define IFX_SSC_PISEL_hwmask 0x00000000 +#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask) + +/* address of Identification Register of the SSC */ +#define IFX_SSC_ID 0x00000008 +/* IFX_SSC_ID register is significant in no bit */ +#define IFX_SSC_ID_readmask 0x0000FF3F +#define IFX_SSC_ID_writemask 0x00000000 +#define IFX_SSC_ID_hwmask 0x00000000 +#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask) + +/* address of the Control Register of the SSC */ +#define IFX_SSC_CON 0x00000010 +/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */ +#define IFX_SSC_CON_readmask 0x01DF1FFF +#define IFX_SSC_CON_writemask 0x01DF1FFF +#define IFX_SSC_CON_hwmask 0x00000000 +#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask) + +/* address of the Status Register of the SSC */ +#define IFX_SSC_STATE 0x00000014 +/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0 + all bits except 1:0 are hardware modified */ +#define IFX_SSC_STATE_readmask 0x771F3F87 +#define IFX_SSC_STATE_writemask 0x00000000 +#define IFX_SSC_STATE_hwmask 0x771F3F84 +#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask) + +/* address of the Write Hardware Modified Control Register Bits of the SSC */ +#define IFX_SSC_WHBSTATE 0x00000018 +/* IFX_SSC_WHBSTATE register is write only */ +#define IFX_SSC_WHBSTATE_readmask 0x00000000 +#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF +#define IFX_SSC_WHBSTATE_hwmask 0x00000000 +#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask) + +/* address of the Baudrate Timer Reload Register of the SSC */ +#define IFX_SSC_BR 0x00000040 +/* IFX_SSC_BR register is significant in bit 15 downto 0*/ +#define IFX_SSC_BR_readmask 0x0000FFFF +#define IFX_SSC_BR_writemask 0x0000FFFF +#define IFX_SSC_BR_hwmask 0x00000000 +#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask) + +/* address of the Baudrate Timer Status Register of the SSC */ +#define IFX_SSC_BRSTAT 0x00000044 +/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/ +#define IFX_SSC_BRSTAT_readmask 0x0000FFFF +#define IFX_SSC_BRSTAT_writemask 0x00000000 +#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF +#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask) + +/* address of the Transmitter Buffer Register of the SSC */ +#define IFX_SSC_TB 0x00000020 +/* IFX_SSC_TB register is significant in bit 31 downto 0*/ +#define IFX_SSC_TB_readmask 0xFFFFFFFF +#define IFX_SSC_TB_writemask 0xFFFFFFFF +#define IFX_SSC_TB_hwmask 0x00000000 +#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask) + +/* address of the Reciver Buffer Register of the SSC */ +#define IFX_SSC_RB 0x00000024 +/* IFX_SSC_RB register is significant in no bits*/ +#define IFX_SSC_RB_readmask 0xFFFFFFFF +#define IFX_SSC_RB_writemask 0x00000000 +#define IFX_SSC_RB_hwmask 0xFFFFFFFF +#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask) + +/* address of the Receive FIFO Control Register of the SSC */ +#define IFX_SSC_RXFCON 0x00000030 +/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ +#define IFX_SSC_RXFCON_readmask 0x00003F03 +#define IFX_SSC_RXFCON_writemask 0x00003F03 +#define IFX_SSC_RXFCON_hwmask 0x00000000 +#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask) + +/* address of the Transmit FIFO Control Register of the SSC */ +#define IFX_SSC_TXFCON 0x00000034 +/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ +#define IFX_SSC_TXFCON_readmask 0x00003F03 +#define IFX_SSC_TXFCON_writemask 0x00003F03 +#define IFX_SSC_TXFCON_hwmask 0x00000000 +#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask) + +/* address of the FIFO Status Register of the SSC */ +#define IFX_SSC_FSTAT 0x00000038 +/* IFX_SSC_FSTAT register is significant in no bit*/ +#define IFX_SSC_FSTAT_readmask 0x00003F3F +#define IFX_SSC_FSTAT_writemask 0x00000000 +#define IFX_SSC_FSTAT_hwmask 0x00003F3F +#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask) + +/* address of the Data Frame Control register of the SSC */ +#define IFX_SSC_SFCON 0x00000060 +#define IFX_SSC_SFCON_readmask 0xFFDFFFFD +#define IFX_SSC_SFCON_writemask 0xFFDFFFFD +#define IFX_SSC_SFCON_hwmask 0x00000000 +#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask) + +/* address of the Data Frame Status register of the SSC */ +#define IFX_SSC_SFSTAT 0x00000064 +#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3 +#define IFX_SSC_SFSTAT_writemask 0x00000000 +#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3 +#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask) + +/* address of the General Purpose Output Control register of the SSC */ +#define IFX_SSC_GPOCON 0x00000070 +#define IFX_SSC_GPOCON_readmask 0x0000FFFF +#define IFX_SSC_GPOCON_writemask 0x0000FFFF +#define IFX_SSC_GPOCON_hwmask 0x00000000 +#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask) + +/* address of the General Purpose Output Status register of the SSC */ +#define IFX_SSC_GPOSTAT 0x00000074 +#define IFX_SSC_GPOSTAT_readmask 0x000000FF +#define IFX_SSC_GPOSTAT_writemask 0x00000000 +#define IFX_SSC_GPOSTAT_hwmask 0x00000000 +#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask) + +/* address of the Force GPO Status register of the SSC */ +#define IFX_SSC_WHBGPOSTAT 0x00000078 +#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000 +#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF +#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000 +#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask) + +/* address of the Receive Request Register of the SSC */ +#define IFX_SSC_RXREQ 0x00000080 +#define IFX_SSC_RXREQ_readmask 0x0000FFFF +#define IFX_SSC_RXREQ_writemask 0x0000FFFF +#define IFX_SSC_RXREQ_hwmask 0x00000000 +#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask) + +/* address of the Receive Count Register of the SSC */ +#define IFX_SSC_RXCNT 0x00000084 +#define IFX_SSC_RXCNT_readmask 0x0000FFFF +#define IFX_SSC_RXCNT_writemask 0x00000000 +#define IFX_SSC_RXCNT_hwmask 0x0000FFFF +#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask) + +/* address of the DMA Configuration Register of the SSC */ +#define IFX_SSC_DMACON 0x000000EC +#define IFX_SSC_DMACON_readmask 0x0000FFFF +#define IFX_SSC_DMACON_writemask 0x00000000 +#define IFX_SSC_DMACON_hwmask 0x0000FFFF +#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask) + +//------------------------------------------------------ +// interrupt register for enabling interrupts, mask register of irq_reg +#define IFX_SSC_IRN_EN 0xF4 +// read/write +#define IFX_SSC_IRN_EN_readmask 0x0000000F +#define IFX_SSC_IRN_EN_writemask 0x0000000F +#define IFX_SSC_IRN_EN_hwmask 0x00000000 +#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask) + +// interrupt register for accessing interrupts +#define IFX_SSC_IRN_CR 0xF8 +// read/write +#define IFX_SSC_IRN_CR_readmask 0x0000000F +#define IFX_SSC_IRN_CR_writemask 0x0000000F +#define IFX_SSC_IRN_CR_hwmask 0x0000000F +#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask) + +// interrupt register for stimulating interrupts +#define IFX_SSC_IRN_ICR 0xFC +// read/write +#define IFX_SSC_IRN_ICR_readmask 0x0000000F +#define IFX_SSC_IRN_ICR_writemask 0x0000000F +#define IFX_SSC_IRN_ICR_hwmask 0x00000000 +#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask) + +//--------------------------------------------------------------------- +// Number of IRQs and bitposition of IRQ +#define IFX_SSC_NUM_IRQ 4 +#define IFX_SSC_T_BIT 0x00000001 +#define IFX_SSC_R_BIT 0x00000002 +#define IFX_SSC_E_BIT 0x00000004 +#define IFX_SSC_F_BIT 0x00000008 + +/* bit masks for SSC registers */ + +/* ID register */ +#define IFX_SSC_PERID_REV_MASK 0x0000001F +#define IFX_SSC_PERID_CFG_MASK 0x00000020 +#define IFX_SSC_PERID_ID_MASK 0x0000FF00 +#define IFX_SSC_PERID_REV_OFFSET 0 +#define IFX_SSC_PERID_CFG_OFFSET 5 +#define IFX_SSC_PERID_ID_OFFSET 8 +#define IFX_SSC_PERID_ID 0x45 +#define IFX_SSC_PERID_DMA_ON 0x00000020 +#define IFX_SSC_PERID_RXFS_MASK 0x003F0000 +#define IFX_SSC_PERID_RXFS_OFFSET 16 +#define IFX_SSC_PERID_TXFS_MASK 0x3F000000 +#define IFX_SSC_PERID_TXFS_OFFSET 24 + +/* PISEL register */ +#define IFX_SSC_PISEL_MASTER_IN_A 0x0000 +#define IFX_SSC_PISEL_MASTER_IN_B 0x0001 +#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000 +#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002 +#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000 +#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004 + +/* IFX_SSC_CON register */ +#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000 +#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000 +#define IFX_SSC_CON_IDLE_HIGH 0x00800000 +#define IFX_SSC_CON_IDLE_LOW 0x00000000 +#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000 +#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000 +#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16 +#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000 +#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK) + +#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000 +#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000 + +#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000 +#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000 +#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800 +#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000 +#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400 +#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000 +#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200 +#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000 +#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100 +#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000 +#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00 +#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000 + +#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080 +#define IFX_SSC_CON_NO_LOOPBACK 0x00000000 +#define IFX_SSC_CON_HALF_DUPLEX 0x00000080 +#define IFX_SSC_CON_FULL_DUPLEX 0x00000000 +#define IFX_SSC_CON_CLOCK_FALL 0x00000040 +#define IFX_SSC_CON_CLOCK_RISE 0x00000000 +#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000 +#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020 +#define IFX_SSC_CON_MSB_FIRST 0x00000010 +#define IFX_SSC_CON_LSB_FIRST 0x00000000 +#define IFX_SSC_CON_ENABLE_CSB 0x00000008 +#define IFX_SSC_CON_DISABLE_CSB 0x00000000 +#define IFX_SSC_CON_INVERT_CSB 0x00000004 +#define IFX_SSC_CON_TRUE_CSB 0x00000000 +#define IFX_SSC_CON_RX_OFF 0x00000002 +#define IFX_SSC_CON_RX_ON 0x00000000 +#define IFX_SSC_CON_TX_OFF 0x00000001 +#define IFX_SSC_CON_TX_ON 0x00000000 + +/* IFX_SSC_STATE register */ +#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28 +#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000 +#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET) +#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24 +#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000 +#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET) +#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16 +#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000 +#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1) +#define IFX_SSC_STATE_BUSY 0x00002000 +#define IFX_SSC_STATE_RX_UFL 0x00001000 +#define IFX_SSC_STATE_TX_UFL 0x00000800 +#define IFX_SSC_STATE_ABORT_ERR 0x00000400 +#define IFX_SSC_STATE_RX_OFL 0x00000200 +#define IFX_SSC_STATE_TX_OFL 0x00000100 +#define IFX_SSC_STATE_MODE_ERR 0x00000080 +#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004 +#define IFX_SSC_STATE_IS_MASTER 0x00000002 +#define IFX_SSC_STATE_IS_ENABLED 0x00000001 + +/* WHBSTATE register */ +#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001 +#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001 +#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001 + +#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002 +#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002 +#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002 + +#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004 +#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004 + +#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008 +#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008 + +#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010 +#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020 + +#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040 +#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080 + +#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100 +#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200 +#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400 +#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800 +#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000 +#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000 +#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000 +#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000 +#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50 +#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0 + +/* BR register */ +#define IFX_SSC_BR_BAUDRATE_OFFSET 0 +#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF + +/* BR_STAT register */ +#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0 +#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF + +/* TB register */ +#define IFX_SSC_TB_DATA_OFFSET 0 +#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF + +/* RB register */ +#define IFX_SSC_RB_DATA_OFFSET 0 +#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF + +/* RXFCON and TXFCON registers */ +#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000 +#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001 +#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002 +#define IFX_SSC_XFCON_ITL_MASK 0x00003F00 +#define IFX_SSC_XFCON_ITL_OFFSET 8 + +/* FSTAT register */ +#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0 +#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F +#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8 +#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00 + +/* GPOCON register */ +#define IFX_SSC_GPOCON_INVOUT0_POS 0 +#define IFX_SSC_GPOCON_INV_OUT0 0x00000001 +#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000 +#define IFX_SSC_GPOCON_INVOUT1_POS 1 +#define IFX_SSC_GPOCON_INV_OUT1 0x00000002 +#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000 +#define IFX_SSC_GPOCON_INVOUT2_POS 2 +#define IFX_SSC_GPOCON_INV_OUT2 0x00000003 +#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000 +#define IFX_SSC_GPOCON_INVOUT3_POS 3 +#define IFX_SSC_GPOCON_INV_OUT3 0x00000008 +#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000 +#define IFX_SSC_GPOCON_INVOUT4_POS 4 +#define IFX_SSC_GPOCON_INV_OUT4 0x00000010 +#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000 +#define IFX_SSC_GPOCON_INVOUT5_POS 5 +#define IFX_SSC_GPOCON_INV_OUT5 0x00000020 +#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000 +#define IFX_SSC_GPOCON_INVOUT6_POS 6 +#define IFX_SSC_GPOCON_INV_OUT6 0x00000040 +#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000 +#define IFX_SSC_GPOCON_INVOUT7_POS 7 +#define IFX_SSC_GPOCON_INV_OUT7 0x00000080 +#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000 +#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF +#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000 + +#define IFX_SSC_GPOCON_ISCSB0_POS 8 +#define IFX_SSC_GPOCON_IS_CSB0 0x00000100 +#define IFX_SSC_GPOCON_IS_GPO0 0x00000000 +#define IFX_SSC_GPOCON_ISCSB1_POS 9 +#define IFX_SSC_GPOCON_IS_CSB1 0x00000200 +#define IFX_SSC_GPOCON_IS_GPO1 0x00000000 +#define IFX_SSC_GPOCON_ISCSB2_POS 10 +#define IFX_SSC_GPOCON_IS_CSB2 0x00000400 +#define IFX_SSC_GPOCON_IS_GPO2 0x00000000 +#define IFX_SSC_GPOCON_ISCSB3_POS 11 +#define IFX_SSC_GPOCON_IS_CSB3 0x00000800 +#define IFX_SSC_GPOCON_IS_GPO3 0x00000000 +#define IFX_SSC_GPOCON_ISCSB4_POS 12 +#define IFX_SSC_GPOCON_IS_CSB4 0x00001000 +#define IFX_SSC_GPOCON_IS_GPO4 0x00000000 +#define IFX_SSC_GPOCON_ISCSB5_POS 13 +#define IFX_SSC_GPOCON_IS_CSB5 0x00002000 +#define IFX_SSC_GPOCON_IS_GPO5 0x00000000 +#define IFX_SSC_GPOCON_ISCSB6_POS 14 +#define IFX_SSC_GPOCON_IS_CSB6 0x00004000 +#define IFX_SSC_GPOCON_IS_GPO6 0x00000000 +#define IFX_SSC_GPOCON_ISCSB7_POS 15 +#define IFX_SSC_GPOCON_IS_CSB7 0x00008000 +#define IFX_SSC_GPOCON_IS_GPO7 0x00000000 +#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00 +#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000 + +/* GPOSTAT register */ +#define IFX_SSC_GPOSTAT_OUT0 0x00000001 +#define IFX_SSC_GPOSTAT_OUT1 0x00000002 +#define IFX_SSC_GPOSTAT_OUT2 0x00000004 +#define IFX_SSC_GPOSTAT_OUT3 0x00000008 +#define IFX_SSC_GPOSTAT_OUT4 0x00000010 +#define IFX_SSC_GPOSTAT_OUT5 0x00000020 +#define IFX_SSC_GPOSTAT_OUT6 0x00000040 +#define IFX_SSC_GPOSTAT_OUT7 0x00000080 +#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF + +/* WHBGPOSTAT register */ +#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001 +#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002 +#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004 +#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008 +#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010 +#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020 +#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040 +#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF + +#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0 +#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1 +#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2 +#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3 +#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4 +#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5 +#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6 +#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7 + +#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8 +#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100 +#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9 +#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200 +#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10 +#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400 +#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11 +#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800 +#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12 +#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000 +#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13 +#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000 +#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14 +#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000 +#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15 +#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000 +#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00 + +/* SFCON register */ +#define IFX_SSC_SFCON_SF_ENABLE 0x00000001 +#define IFX_SSC_SFCON_SF_DISABLE 0x00000000 +#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004 +#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000 +#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008 +#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000 +#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0 +#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4 +#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000 +#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16 +#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000 +#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000 +#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18 +#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000 +#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000 +#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000 +#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000 +#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22 +#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096 +#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024 + +#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET) +#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) +#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK) +#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) + +/* SFSTAT register */ +#define IFX_SSC_SFSTAT_IN_DATA 0x00000001 +#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002 +#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0 +#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4 +#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000 +#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20 + +#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET) +#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET) + +/* RXREQ register */ +#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF +#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0 + +/* RXCNT register */ +#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF +#define IFX_SSC_RXCNT_TODO_OFFSET 0 + +/* DMACON register */ +#define IFX_SSC_DMACON_RXON 0x00000001 +#define IFX_SSC_DMACON_RXOFF 0x00000000 +#define IFX_SSC_DMACON_TXON 0x00000002 +#define IFX_SSC_DMACON_TXOFF 0x00000000 +#define IFX_SSC_DMACON_DMAON 0x00000003 +#define IFX_SSC_DMACON_DMAOFF 0x00000000 +#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C +#define IFX_SSC_DMACON_CLASS_OFFSET 2 + +/* register access macros */ +#define ifx_ssc_fstat_received_words(status) (status & 0x003F) +#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8) + +#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE)) +#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON)) +#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON)) +#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE)) +#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB)) +#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB)) +#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT)) +#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR)) + +#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET) +#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips.h new file mode 100644 index 0000000000..c8cf0aef5c --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips.h @@ -0,0 +1,516 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2005 infineon + * Copyright (C) 2007 John Crispin + */ +#ifndef _IFXMIPS_H__ +#define _IFXMIPS_H__ + +#define ifxmips_r32(reg) __raw_readl(reg) +#define ifxmips_w32(val, reg) __raw_writel(val, reg) +#define ifxmips_w32_mask(clear, set, reg) ifxmips_w32((ifxmips_r32(reg) & ~clear) | set, reg) + +/*------------ GENERAL */ + +#define BOARD_SYSTEM_TYPE "IFXMIPS" + +#define IOPORT_RESOURCE_START 0x10000000 +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff + +#define IFXMIPS_FLASH_START 0x10000000 +#define IFXMIPS_FLASH_MAX 0x02000000 + +/*------------ ASC0/1 */ + +#define IFXMIPS_ASC_BASE_ADDR (KSEG1 + 0x1E100400) +#define IFXMIPS_ASC_BASE_DIFF (0x1E100C00 - 0x1E100400) + +#define IFXMIPS_ASC_FSTAT 0x0048 +#define IFXMIPS_ASC_TBUF 0x0020 +#define IFXMIPS_ASC_WHBSTATE 0x0018 +#define IFXMIPS_ASC_RBUF 0x0024 +#define IFXMIPS_ASC_STATE 0x0014 +#define IFXMIPS_ASC_IRNCR 0x00F8 +#define IFXMIPS_ASC_CLC 0x0000 +#define IFXMIPS_ASC_PISEL 0x0004 +#define IFXMIPS_ASC_TXFCON 0x0044 +#define IFXMIPS_ASC_RXFCON 0x0040 +#define IFXMIPS_ASC_CON 0x0010 +#define IFXMIPS_ASC_BG 0x0050 +#define IFXMIPS_ASC_IRNREN 0x00F4 + +#define IFXMIPS_ASC_CLC_DISS 0x2 +#define ASC_IRNREN_RX_BUF 0x8 +#define ASC_IRNREN_TX_BUF 0x4 +#define ASC_IRNREN_ERR 0x2 +#define ASC_IRNREN_TX 0x1 +#define ASC_IRNCR_TIR 0x4 +#define ASC_IRNCR_RIR 0x2 +#define ASC_IRNCR_EIR 0x4 +#define ASCOPT_CSIZE 0x3 +#define ASCOPT_CS7 0x1 +#define ASCOPT_CS8 0x2 +#define ASCOPT_PARENB 0x4 +#define ASCOPT_STOPB 0x8 +#define ASCOPT_PARODD 0x0 +#define ASCOPT_CREAD 0x20 +#define TXFIFO_FL 1 +#define RXFIFO_FL 1 +#define TXFIFO_FULL 16 +#define ASCCLC_RMCMASK 0x0000FF00 +#define ASCCLC_RMCOFFSET 8 +#define ASCCON_M_8ASYNC 0x0 +#define ASCCON_M_7ASYNC 0x2 +#define ASCCON_ODD 0x00000020 +#define ASCCON_STP 0x00000080 +#define ASCCON_BRS 0x00000100 +#define ASCCON_FDE 0x00000200 +#define ASCCON_R 0x00008000 +#define ASCCON_FEN 0x00020000 +#define ASCCON_ROEN 0x00080000 +#define ASCCON_TOEN 0x00100000 +#define ASCSTATE_PE 0x00010000 +#define ASCSTATE_FE 0x00020000 +#define ASCSTATE_ROE 0x00080000 +#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE) +#define ASCWHBSTATE_CLRREN 0x00000001 +#define ASCWHBSTATE_SETREN 0x00000002 +#define ASCWHBSTATE_CLRPE 0x00000004 +#define ASCWHBSTATE_CLRFE 0x00000008 +#define ASCWHBSTATE_CLRROE 0x00000020 +#define ASCTXFCON_TXFEN 0x0001 +#define ASCTXFCON_TXFFLU 0x0002 +#define ASCTXFCON_TXFITLMASK 0x3F00 +#define ASCTXFCON_TXFITLOFF 8 +#define ASCRXFCON_RXFEN 0x0001 +#define ASCRXFCON_RXFFLU 0x0002 +#define ASCRXFCON_RXFITLMASK 0x3F00 +#define ASCRXFCON_RXFITLOFF 8 +#define ASCFSTAT_RXFFLMASK 0x003F +#define ASCFSTAT_TXFFLMASK 0x3F00 +#define ASCFSTAT_TXFFLOFF 8 + + + +/*------------ RCU */ +#define IFXMIPS_RCU_BASE_ADDR 0xBF203000 + +/* reset request */ +#define IFXMIPS_RCU_RST ((u32 *)(IFXMIPS_RCU_BASE_ADDR + 0x0010)) +#define IFXMIPS_RCU_RST_CPU1 (1 << 3) +#define IFXMIPS_RCU_RST_ALL 0x40000000 + +#define IFXMIPS_RCU_RST_REQ_DFE (1 << 7) +#define IFXMIPS_RCU_RST_REQ_AFE (1 << 11) +#define IFXMIPS_RCU_RST_REQ_ARC_JTAG (1 << 20) + + +/*------------ GPTU */ + +#define IFXMIPS_GPTU_BASE_ADDR 0xB8000300 + +/* clock control register */ +#define IFXMIPS_GPTU_GPT_CLC ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0000)) + +/* captur reload register */ +#define IFXMIPS_GPTU_GPT_CAPREL ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0030)) + +/* timer 6 control register */ +#define IFXMIPS_GPTU_GPT_T6CON ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0020)) + + +/*------------ EBU */ + +#define IFXMIPS_EBU_BASE_ADDR 0xBE105300 + +/* bus configuration register */ +#define IFXMIPS_EBU_BUSCON0 ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0060)) +#define IFXMIPS_EBU_PCC_CON ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0090)) +#define IFXMIPS_EBU_PCC_IEN ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A4)) +#define IFXMIPS_EBU_PCC_ISTAT ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A0)) + + +/*------------ CGU */ +#define IFXMIPS_CGU_BASE_ADDR (KSEG1 + 0x1F103000) +#define IFXMIPS_CGU_PLL0_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0004)) +#define IFXMIPS_CGU_PLL1_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0008)) +#define IFXMIPS_CGU_PLL2_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x000C)) +#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010)) +#define IFXMIPS_CGU_UPDATE ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0014)) +#define IFXMIPS_CGU_IF_CLK ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018)) +#define IFXMIPS_CGU_OSC_CON ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x001C)) +#define IFXMIPS_CGU_SMD ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0020)) +#define IFXMIPS_CGU_CT1SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0028)) +#define IFXMIPS_CGU_CT2SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x002C)) +#define IFXMIPS_CGU_PCMCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0030)) +#define IFXMIPS_CGU_PCI_CR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034)) +#define IFXMIPS_CGU_PD_PC ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0038)) +#define IFXMIPS_CGU_FMR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x003C)) + +/* clock mux */ +#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010)) +#define IFXMIPS_CGU_IFCCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018)) +#define IFXMIPS_CGU_PCICR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034)) + +#define CLOCK_60M 60000000 +#define CLOCK_83M 83333333 +#define CLOCK_111M 111111111 +#define CLOCK_133M 133333333 +#define CLOCK_167M 166666667 +#define CLOCK_333M 333333333 + + +/*------------ CGU */ + +#define IFXMIPS_PMU_BASE_ADDR (KSEG1 + 0x1F102000) + +#define IFXMIPS_PMU_PWDCR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x001C)) +#define IFXMIPS_PMU_PWDSR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x0020)) + + +/*------------ ICU */ + +#define IFXMIPS_ICU_BASE_ADDR 0xBF880200 + + +#define IFXMIPS_ICU_IM0_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0000)) +#define IFXMIPS_ICU_IM0_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0008)) +#define IFXMIPS_ICU_IM0_IOSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0010)) +#define IFXMIPS_ICU_IM0_IRSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0018)) +#define IFXMIPS_ICU_IM0_IMR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0020)) + +#define IFXMIPS_ICU_IM1_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0028)) +#define IFXMIPS_ICU_IM2_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0058)) +#define IFXMIPS_ICU_IM3_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0080)) +#define IFXMIPS_ICU_IM4_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00A8)) +#define IFXMIPS_ICU_IM5_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00D0)) + +#define IFXMIPS_ICU_OFFSET (IFXMIPS_ICU_IM1_ISR - IFXMIPS_ICU_IM0_ISR) + + +/*------------ ETOP */ + +#define IFXMIPS_PPE32_BASE_ADDR 0xBE180000 + +#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600 + +#define IFXMIPS_PPE32_MEM_MAP ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10000)) +#define IFXMIPS_PPE32_SRST ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10080)) + +#define MII_MODE 1 +#define REV_MII_MODE 2 + +/* mdio access */ +#define IFXMIPS_PPE32_MDIO_CFG ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11800)) +#define IFXMIPS_PPE32_MDIO_ACC ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11804)) + +#define MDIO_ACC_REQUEST 0x80000000 +#define MDIO_ACC_READ 0x40000000 +#define MDIO_ACC_ADDR_MASK 0x1f +#define MDIO_ACC_ADDR_OFFSET 0x15 +#define MDIO_ACC_REG_MASK 0xff +#define MDIO_ACC_REG_OFFSET 0x10 +#define MDIO_ACC_VAL_MASK 0xffff + +/* configuration */ +#define IFXMIPS_PPE32_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1808)) + +#define PPE32_MII_MASK 0xfffffffc +#define PPE32_MII_NORMAL 0x8 +#define PPE32_MII_REVERSE 0xe + +/* packet length */ +#define IFXMIPS_PPE32_IG_PLEN_CTRL ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1820)) + +#define PPE32_PLEN_OVER 0x5ee +#define PPE32_PLEN_UNDER 0x400000 + +/* enet */ +#define IFXMIPS_PPE32_ENET_MAC_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1840)) + +#define PPE32_CGEN 0x800 + + +/*------------ DMA */ +#define IFXMIPS_DMA_BASE_ADDR 0xBE104100 + +#define IFXMIPS_DMA_CS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x18)) +#define IFXMIPS_DMA_CIE ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x2C)) +#define IFXMIPS_DMA_IRNEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0xf4)) +#define IFXMIPS_DMA_CCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x1C)) +#define IFXMIPS_DMA_CIS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x28)) +#define IFXMIPS_DMA_CDLEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x24)) +#define IFXMIPS_DMA_PS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x40)) +#define IFXMIPS_DMA_PCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x44)) +#define IFXMIPS_DMA_CTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x10)) +#define IFXMIPS_DMA_CPOLL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x14)) +#define IFXMIPS_DMA_CDBA ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x20)) + + +/*------------ PCI */ +#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400) + +#define PCI_CR_FCI_ADDR_MAP0 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C0)) +#define PCI_CR_FCI_ADDR_MAP1 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C4)) +#define PCI_CR_FCI_ADDR_MAP2 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C8)) +#define PCI_CR_FCI_ADDR_MAP3 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00CC)) +#define PCI_CR_FCI_ADDR_MAP4 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D0)) +#define PCI_CR_FCI_ADDR_MAP5 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D4)) +#define PCI_CR_FCI_ADDR_MAP6 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D8)) +#define PCI_CR_FCI_ADDR_MAP7 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00DC)) +#define PCI_CR_CLK_CTRL ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0000)) +#define PCI_CR_PCI_MOD ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0030)) +#define PCI_CR_PC_ARB ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0080)) +#define PCI_CR_FCI_ADDR_MAP11hg ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E4)) +#define PCI_CR_BAR11MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0044)) +#define PCI_CR_BAR12MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0048)) +#define PCI_CR_BAR13MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x004C)) +#define PCI_CS_BASE_ADDR1 ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0010)) +#define PCI_CR_PCI_ADDR_MAP11 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0064)) +#define PCI_CR_FCI_BURST_LENGTH ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E8)) +#define PCI_CR_PCI_EOI ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x002C)) + +#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000) + +#define PCI_CS_STS_CMD ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0004)) + +#define PCI_MASTER0_REQ_MASK_2BITS 8 +#define PCI_MASTER1_REQ_MASK_2BITS 10 +#define PCI_MASTER2_REQ_MASK_2BITS 12 +#define INTERNAL_ARB_ENABLE_BIT 0 + + +/*------------ WDT */ + +#define IFXMIPS_WDT_BASE_ADDR (KSEG1 + 0x1F880000) + +#define IFXMIPS_BIU_WDT_CR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F0)) +#define IFXMIPS_BIU_WDT_SR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F8)) + + +/*------------ LED */ + +#define IFXMIPS_LED_BASE_ADDR (KSEG1 + 0x1E100BB0) +#define IFXMIPS_LED_CON0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0000)) +#define IFXMIPS_LED_CON1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0004)) +#define IFXMIPS_LED_CPU0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0008)) +#define IFXMIPS_LED_CPU1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x000C)) +#define IFXMIPS_LED_AR ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0010)) + +#define LED_CON0_SWU (1 << 31) +#define LED_CON0_AD1 (1 << 25) +#define LED_CON0_AD0 (1 << 24) + +#define IFXMIPS_LED_2HZ (0) +#define IFXMIPS_LED_4HZ (1 << 23) +#define IFXMIPS_LED_8HZ (2 << 23) +#define IFXMIPS_LED_10HZ (3 << 23) +#define IFXMIPS_LED_MASK (0xf << 23) + +#define IFXMIPS_LED_UPD_SRC_FPI (1 << 31) +#define IFXMIPS_LED_UPD_MASK (3 << 30) +#define IFXMIPS_LED_ADSL_SRC (3 << 24) + +#define IFXMIPS_LED_GROUP0 (1 << 0) +#define IFXMIPS_LED_GROUP1 (1 << 1) +#define IFXMIPS_LED_GROUP2 (1 << 2) + +#define IFXMIPS_LED_RISING 0 +#define IFXMIPS_LED_FALLING (1 << 26) +#define IFXMIPS_LED_EDGE_MASK (1 << 26) + + +/*------------ GPIO */ + +#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00) + +#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010)) +#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040)) +#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014)) +#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044)) +#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018)) +#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048)) +#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C)) +#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C)) +#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020)) +#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050)) +#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024)) +#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054)) +#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028)) +#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058)) +#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C)) +#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C)) +#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030)) +#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060)) + + +/*------------ SSC */ + +#define IFXMIPS_SSC_BASE_ADDR (KSEG1 + 0x1e100800) + + +#define IFXMIPS_SSC_CLC ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0000)) +#define IFXMIPS_SSC_IRN ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x00F4)) +#define IFXMIPS_SSC_SFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0060)) +#define IFXMIPS_SSC_WHBGPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0078)) +#define IFXMIPS_SSC_STATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0014)) +#define IFXMIPS_SSC_WHBSTATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0018)) +#define IFXMIPS_SSC_FSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0038)) +#define IFXMIPS_SSC_ID ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0008)) +#define IFXMIPS_SSC_TB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0020)) +#define IFXMIPS_SSC_RXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0030)) +#define IFXMIPS_SSC_TXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0034)) +#define IFXMIPS_SSC_CON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0010)) +#define IFXMIPS_SSC_GPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0074)) +#define IFXMIPS_SSC_RB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0024)) +#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084)) +#define IFXMIPS_SSC_GPOCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0070)) +#define IFXMIPS_SSC_BR ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0040)) +#define IFXMIPS_SSC_RXREQ ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0080)) +#define IFXMIPS_SSC_SFSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0064)) +#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084)) + + +/*------------ MEI */ + +#define IFXMIPS_MEI_BASE_ADDR (KSEG1 + 0x1E116000) + +#define MEI_DATA_XFR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0000)) +#define MEI_VERSION ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0004)) +#define MEI_ARC_GP_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0008)) +#define MEI_DATA_XFR_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x000C)) +#define MEI_XFR_ADDR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0010)) +#define MEI_MAX_WAIT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0014)) +#define MEI_TO_ARC_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0018)) +#define ARC_TO_MEI_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x001C)) +#define ARC_TO_MEI_INT_MASK ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0020)) +#define MEI_DEBUG_WAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0024)) +#define MEI_DEBUG_RAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0028)) +#define MEI_DEBUG_DATA ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x002C)) +#define MEI_DEBUG_DEC ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0030)) +#define MEI_CONFIG ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0034)) +#define MEI_RST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0038)) +#define MEI_DBG_MASTER ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x003C)) +#define MEI_CLK_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0040)) +#define MEI_BIST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0044)) +#define MEI_BIST_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0048)) +#define MEI_XDATA_BASE_SH ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x004c)) +#define MEI_XDATA_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0050)) +#define MEI_XMEM_BAR_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054)) +#define MEI_XMEM_BAR0 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054)) +#define MEI_XMEM_BAR1 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0058)) +#define MEI_XMEM_BAR2 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x005C)) +#define MEI_XMEM_BAR3 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0060)) +#define MEI_XMEM_BAR4 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0064)) +#define MEI_XMEM_BAR5 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0068)) +#define MEI_XMEM_BAR6 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x006C)) +#define MEI_XMEM_BAR7 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0070)) +#define MEI_XMEM_BAR8 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0074)) +#define MEI_XMEM_BAR9 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0078)) +#define MEI_XMEM_BAR10 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x007C)) +#define MEI_XMEM_BAR11 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0080)) +#define MEI_XMEM_BAR12 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0084)) +#define MEI_XMEM_BAR13 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0088)) +#define MEI_XMEM_BAR14 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x008C)) +#define MEI_XMEM_BAR15 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0090)) +#define MEI_XMEM_BAR16 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0094)) + + +/*------------ DEU */ + +#define IFXMIPS_DEU_BASE (KSEG1 + 0x1E103100) +#define IFXMIPS_DEU_CLK ((u32 *)(IFXMIPS_DEU_BASE + 0x0000)) +#define IFXMIPS_DEU_ID ((u32 *)(IFXMIPS_DEU_BASE + 0x0008)) + +#define IFXMIPS_DES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0010)) +#define IFXMIPS_DES_IHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0014)) +#define IFXMIPS_DES_ILR ((u32 *)(IFXMIPS_DEU_BASE + 0x0018)) +#define IFXMIPS_DES_K1HR ((u32 *)(IFXMIPS_DEU_BASE + 0x001C)) +#define IFXMIPS_DES_K1LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0020)) +#define IFXMIPS_DES_K3HR ((u32 *)(IFXMIPS_DEU_BASE + 0x0024)) +#define IFXMIPS_DES_K3LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0028)) +#define IFXMIPS_DES_IVHR ((u32 *)(IFXMIPS_DEU_BASE + 0x002C)) +#define IFXMIPS_DES_IVLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0030)) +#define IFXMIPS_DES_OHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0040)) +#define IFXMIPS_DES_OLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0050)) +#define IFXMIPS_AES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0050)) +#define IFXMIPS_AES_ID3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0054)) +#define IFXMIPS_AES_ID2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0058)) +#define IFXMIPS_AES_ID1R ((u32 *)(IFXMIPS_DEU_BASE + 0x005C)) +#define IFXMIPS_AES_ID0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0060)) +#define IFXMIPS_AES_K7R ((u32 *)(IFXMIPS_DEU_BASE + 0x0064)) +#define IFXMIPS_AES_K6R ((u32 *)(IFXMIPS_DEU_BASE + 0x0068)) +#define IFXMIPS_AES_K5R ((u32 *)(IFXMIPS_DEU_BASE + 0x006C)) +#define IFXMIPS_AES_K4R ((u32 *)(IFXMIPS_DEU_BASE + 0x0070)) +#define IFXMIPS_AES_K3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0074)) +#define IFXMIPS_AES_K2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0078)) +#define IFXMIPS_AES_K1R ((u32 *)(IFXMIPS_DEU_BASE + 0x007C)) +#define IFXMIPS_AES_K0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0080)) +#define IFXMIPS_AES_IV3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0084)) +#define IFXMIPS_AES_IV2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0088)) +#define IFXMIPS_AES_IV1R ((u32 *)(IFXMIPS_DEU_BASE + 0x008C)) +#define IFXMIPS_AES_IV0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0090)) +#define IFXMIPS_AES_0D3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0094)) +#define IFXMIPS_AES_0D2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0098)) +#define IFXMIPS_AES_OD1R ((u32 *)(IFXMIPS_DEU_BASE + 0x009C)) +#define IFXMIPS_AES_OD0R ((u32 *)(IFXMIPS_DEU_BASE + 0x00A0)) + +/*------------ FUSE */ + +#define IFXMIPS_FUSE_BASE_ADDR (KSEG1 + 0x1F107354) + + +/*------------ MPS */ + +#define IFXMIPS_MPS_BASE_ADDR (KSEG1 + 0x1F107000) +#define IFXMIPS_MPS_SRAM ((u32 *)(KSEG1 + 0x1F200000)) + +#define IFXMIPS_MPS_CHIPID ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0344)) +#define IFXMIPS_MPS_VC0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0000)) +#define IFXMIPS_MPS_VC1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0004)) +#define IFXMIPS_MPS_VC2ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0008)) +#define IFXMIPS_MPS_VC3ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x000C)) +#define IFXMIPS_MPS_RVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0010)) +#define IFXMIPS_MPS_RVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0014)) +#define IFXMIPS_MPS_RVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0018)) +#define IFXMIPS_MPS_RVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x001C)) +#define IFXMIPS_MPS_SVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0020)) +#define IFXMIPS_MPS_SVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0024)) +#define IFXMIPS_MPS_SVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0028)) +#define IFXMIPS_MPS_SVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x002C)) +#define IFXMIPS_MPS_CVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0030)) +#define IFXMIPS_MPS_CVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0034)) +#define IFXMIPS_MPS_CVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0038)) +#define IFXMIPS_MPS_CVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x003C)) +#define IFXMIPS_MPS_RAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0040)) +#define IFXMIPS_MPS_RAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0044)) +#define IFXMIPS_MPS_SAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0048)) +#define IFXMIPS_MPS_SAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x004C)) +#define IFXMIPS_MPS_CAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0050)) +#define IFXMIPS_MPS_CAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0054)) +#define IFXMIPS_MPS_AD0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0058)) +#define IFXMIPS_MPS_AD1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x005C)) + +#define IFXMIPS_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) +#define IFXMIPS_MPS_CHIPID_VERSION_SET(value) ((((1 << 4) - 1) & (value)) << 28) +#define IFXMIPS_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1)) +#define IFXMIPS_MPS_CHIPID_PARTNUM_SET(value) ((((1 << 16) - 1) & (value)) << 12) +#define IFXMIPS_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1)) +#define IFXMIPS_MPS_CHIPID_MANID_SET(value) ((((1 << 10) - 1) & (value)) << 1) + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_dma.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_dma.h new file mode 100644 index 0000000000..8ba852a1ec --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_dma.h @@ -0,0 +1,195 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2005 infineon + * Copyright (C) 2007 John Crispin + * + */ +#ifndef _IFXMIPS_DMA_H__ +#define _IFXMIPS_DMA_H__ + +#define RCV_INT 1 +#define TX_BUF_FULL_INT 2 +#define TRANSMIT_CPT_INT 4 +#define IFXMIPS_DMA_CH_ON 1 +#define IFXMIPS_DMA_CH_OFF 0 +#define IFXMIPS_DMA_CH_DEFAULT_WEIGHT 100 + +enum attr_t{ + TX = 0, + RX = 1, + RESERVED = 2, + DEFAULT = 3, +}; + +#define DMA_OWN 1 +#define CPU_OWN 0 +#define DMA_MAJOR 250 + +#define DMA_DESC_OWN_CPU 0x0 +#define DMA_DESC_OWN_DMA 0x80000000 +#define DMA_DESC_CPT_SET 0x40000000 +#define DMA_DESC_SOP_SET 0x20000000 +#define DMA_DESC_EOP_SET 0x10000000 + +#define MISCFG_MASK 0x40 +#define RDERR_MASK 0x20 +#define CHOFF_MASK 0x10 +#define DESCPT_MASK 0x8 +#define DUR_MASK 0x4 +#define EOP_MASK 0x2 + +#define DMA_DROP_MASK (1<<31) + +#define IFXMIPS_DMA_RX -1 +#define IFXMIPS_DMA_TX 1 + +struct dma_chan_map { + const char *dev_name; + enum attr_t dir; + int pri; + int irq; + int rel_chan_no; +}; + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +struct rx_desc { + u32 data_length:16; + volatile u32 reserved:7; + volatile u32 byte_offset:2; + volatile u32 Burst_length_offset:3; + volatile u32 EoP:1; + volatile u32 Res:1; + volatile u32 C:1; + volatile u32 OWN:1; + volatile u32 Data_Pointer; /* fixme: should be 28 bits here */ +}; + +struct tx_desc { + volatile u32 data_length:16; + volatile u32 reserved1:7; + volatile u32 byte_offset:5; + volatile u32 EoP:1; + volatile u32 SoP:1; + volatile u32 C:1; + volatile u32 OWN:1; + volatile u32 Data_Pointer; /* fixme: should be 28 bits here */ +}; +#else /* BIG */ +struct rx_desc { + union { + struct { + volatile u32 OWN:1; + volatile u32 C:1; + volatile u32 SoP:1; + volatile u32 EoP:1; + volatile u32 Burst_length_offset:3; + volatile u32 byte_offset:2; + volatile u32 reserve:7; + volatile u32 data_length:16; + } field; + volatile u32 word; + } status; + volatile u32 Data_Pointer; +}; + +struct tx_desc { + union { + struct { + volatile u32 OWN:1; + volatile u32 C:1; + volatile u32 SoP:1; + volatile u32 EoP:1; + volatile u32 byte_offset:5; + volatile u32 reserved:7; + volatile u32 data_length:16; + } field; + volatile u32 word; + } status; + volatile u32 Data_Pointer; +}; +#endif /* ENDIAN */ + +struct dma_channel_info { + /* relative channel number */ + int rel_chan_no; + /* class for this channel for QoS */ + int pri; + /* specify byte_offset */ + int byte_offset; + /* direction */ + int dir; + /* irq number */ + int irq; + /* descriptor parameter */ + int desc_base; + int desc_len; + int curr_desc; + int prev_desc; /* only used if it is a tx channel*/ + /* weight setting for WFQ algorithm*/ + int weight; + int default_weight; + int packet_size; + int burst_len; + /* on or off of this channel */ + int control; + /* optional information for the upper layer devices */ +#if defined(CONFIG_IFXMIPS_ETHERNET_D2) || defined(CONFIG_IFXMIPS_PPA) + void *opt[64]; +#else + void *opt[25]; +#endif + /* Pointer to the peripheral device who is using this channel */ + void *dma_dev; + /* channel operations */ + void (*open)(struct dma_channel_info *pCh); + void (*close)(struct dma_channel_info *pCh); + void (*reset)(struct dma_channel_info *pCh); + void (*enable_irq)(struct dma_channel_info *pCh); + void (*disable_irq)(struct dma_channel_info *pCh); +}; + +struct dma_device_info { + /* device name of this peripheral */ + char device_name[15]; + int reserved; + int tx_burst_len; + int rx_burst_len; + int default_weight; + int current_tx_chan; + int current_rx_chan; + int num_tx_chan; + int num_rx_chan; + int max_rx_chan_num; + int max_tx_chan_num; + struct dma_channel_info *tx_chan[20]; + struct dma_channel_info *rx_chan[20]; + /*functions, optional*/ + u8 *(*buffer_alloc)(int len, int *offset, void **opt); + void (*buffer_free)(u8 *dataptr, void *opt); + int (*intr_handler)(struct dma_device_info *info, int status); + void *priv; /* used by peripheral driver only */ +}; + +struct dma_device_info *dma_device_reserve(char *dev_name); +void dma_device_release(struct dma_device_info *dev); +void dma_device_register(struct dma_device_info *info); +void dma_device_unregister(struct dma_device_info *info); +int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt); +int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len, + void *opt); + +#endif + diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_ebu.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_ebu.h new file mode 100644 index 0000000000..4c9396ae88 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_ebu.h @@ -0,0 +1,23 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2007 John Crispin + */ +#ifndef _IFXMIPS_EBU_H__ +#define _IFXMIPS_EBU_H__ + +extern spinlock_t ebu_lock; + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gpio.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gpio.h new file mode 100644 index 0000000000..a4c8c3ffb1 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gpio.h @@ -0,0 +1,40 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * Copyright (C) 2007 John Crispin + */ +#ifndef _IFXMIPS_GPIO_H__ +#define _IFXMIPS_GPIO_H__ + +extern int ifxmips_port_reserve_pin(unsigned int port, unsigned int pin); +extern int ifxmips_port_free_pin(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_open_drain(unsigned int port, unsigned int pin); +extern int ifxmips_port_clear_open_drain(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_pudsel(unsigned int port, unsigned int pin); +extern int ifxmips_port_clear_pudsel(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_puden(unsigned int port, unsigned int pin); +extern int ifxmips_port_clear_puden(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_stoff(unsigned int port, unsigned int pin); +extern int ifxmips_port_clear_stoff(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_dir_out(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_dir_in(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_output(unsigned int port, unsigned int pin); +extern int ifxmips_port_clear_output(unsigned int port, unsigned int pin); +extern int ifxmips_port_get_input(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_altsel0(unsigned int port, unsigned int pin); +extern int ifxmips_port_clear_altsel0(unsigned int port, unsigned int pin); +extern int ifxmips_port_set_altsel1(unsigned int port, unsigned int pin); +extern int ifxmips_port_clear_altsel1(unsigned int port, unsigned int pin); + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gptu.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gptu.h new file mode 100644 index 0000000000..330c3cfd55 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gptu.h @@ -0,0 +1,155 @@ +#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ +#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ + + +/****************************************************************************** + Copyright (c) 2002, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. +******************************************************************************/ + + +/* + * #################################### + * Definition + * #################################### + */ + +/* + * Available Timer/Counter Index + */ +#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) +#define TIMER_ANY 0x00 +#define TIMER1A TIMER(1, 0) +#define TIMER1B TIMER(1, 1) +#define TIMER2A TIMER(2, 0) +#define TIMER2B TIMER(2, 1) +#define TIMER3A TIMER(3, 0) +#define TIMER3B TIMER(3, 1) + +/* + * Flag of Timer/Counter + * These flags specify the way in which timer is configured. + */ +/* Bit size of timer/counter. */ +#define TIMER_FLAG_16BIT 0x0000 +#define TIMER_FLAG_32BIT 0x0001 +/* Switch between timer and counter. */ +#define TIMER_FLAG_TIMER 0x0000 +#define TIMER_FLAG_COUNTER 0x0002 +/* Stop or continue when overflowing/underflowing. */ +#define TIMER_FLAG_ONCE 0x0000 +#define TIMER_FLAG_CYCLIC 0x0004 +/* Count up or counter down. */ +#define TIMER_FLAG_UP 0x0000 +#define TIMER_FLAG_DOWN 0x0008 +/* Count on specific level or edge. */ +#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 +#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 +#define TIMER_FLAG_RISE_EDGE 0x0010 +#define TIMER_FLAG_FALL_EDGE 0x0020 +#define TIMER_FLAG_ANY_EDGE 0x0030 +/* Signal is syncronous to module clock or not. */ +#define TIMER_FLAG_UNSYNC 0x0000 +#define TIMER_FLAG_SYNC 0x0080 +/* Different interrupt handle type. */ +#define TIMER_FLAG_NO_HANDLE 0x0000 +#if defined(__KERNEL__) + #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 +#endif // defined(__KERNEL__) +#define TIMER_FLAG_SIGNAL 0x0300 +/* Internal clock source or external clock source */ +#define TIMER_FLAG_INT_SRC 0x0000 +#define TIMER_FLAG_EXT_SRC 0x1000 + + +/* + * ioctl Command + */ +#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ +#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ +#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ +#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ +#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ +#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ +#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ +#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ + +/* + * Data Type Used to Call ioctl + */ +struct gptu_ioctl_param { + unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * + * GPTU_SET_COUNTER, this field is ID of expected * + * timer/counter. If it's zero, a timer/counter would * + * be dynamically allocated and ID would be stored in * + * this field. * + * In command GPTU_GET_COUNT_VALUE, this field is * + * ignored. * + * In other command, this field is ID of timer/counter * + * allocated. */ + unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * + * GPTU_SET_COUNTER, this field contains flags to * + * specify how to configure timer/counter. * + * In command GPTU_START_TIMER, zero indicate start * + * and non-zero indicate resume timer/counter. * + * In other command, this field is ignored. */ + unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * + * init/reload value. * + * In command GPTU_SET_TIMER, this field contains * + * frequency (0.001Hz) of timer. * + * In command GPTU_GET_COUNT_VALUE, current count * + * value would be stored in this field. * + * In command GPTU_CALCULATE_DIVIDER, this field * + * contains frequency wanted, and after calculation, * + * divider would be stored in this field to overwrite * + * the frequency. * + * In other command, this field is ignored. */ + int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * + * if signal is required, this field contains process * + * ID to which signal would be sent. * + * In other command, this field is ignored. */ + int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * + * if signal is required, this field contains signal * + * number which would be sent. * + * In other command, this field is ignored. */ +}; + +/* + * #################################### + * Data Type + * #################################### + */ +typedef void (*timer_callback)(unsigned long arg); + +extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); +extern int ifxmips_free_timer(unsigned int); +extern int ifxmips_start_timer(unsigned int, int); +extern int ifxmips_stop_timer(unsigned int); +extern int ifxmips_reset_counter_flags(u32 timer, u32 flags); +extern int ifxmips_get_count_value(unsigned int, unsigned long *); +extern u32 ifxmips_cal_divider(unsigned long); +extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); +extern int ifxmips_set_counter(unsigned int timer, unsigned int flag, + u32 reload, unsigned long arg1, unsigned long arg2); + +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_irq.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_irq.h new file mode 100644 index 0000000000..f84fdcb120 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_irq.h @@ -0,0 +1,74 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2005 infineon + * Copyright (C) 2007 John Crispin + */ +#ifndef _IFXMIPS_IRQ__ +#define _IFXMIPS_IRQ__ + +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) +#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) +#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) +#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) +#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) + +#define IFXMIPSASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 7)) +#define IFXMIPSASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 2) +#define IFXMIPSASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 3) + +#define IFXMIPS_SSC_TIR (INT_NUM_IM0_IRL0 + 15) +#define IFXMIPS_SSC_RIR (INT_NUM_IM0_IRL0 + 14) +#define IFXMIPS_SSC_EIR (INT_NUM_IM0_IRL0 + 16) + +#define IFXMIPS_MEI_INT (INT_NUM_IM1_IRL0 + 23) + +#define IFXMIPS_TIMER6_INT (INT_NUM_IM1_IRL0 + 23) +#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23) + +#define MIPS_CPU_TIMER_IRQ 7 + +#define IFXMIPS_DMA_CH0_INT (INT_NUM_IM2_IRL0) +#define IFXMIPS_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1) +#define IFXMIPS_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2) +#define IFXMIPS_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3) +#define IFXMIPS_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4) +#define IFXMIPS_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5) +#define IFXMIPS_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6) +#define IFXMIPS_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7) +#define IFXMIPS_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8) +#define IFXMIPS_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9) +#define IFXMIPS_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10) +#define IFXMIPS_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11) +#define IFXMIPS_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25) +#define IFXMIPS_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26) +#define IFXMIPS_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27) +#define IFXMIPS_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28) +#define IFXMIPS_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29) +#define IFXMIPS_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30) +#define IFXMIPS_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16) +#define IFXMIPS_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21) + +#define IFXMIPS_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24) + +#define IFXMIPS_USB_INT (INT_NUM_IM4_IRL0 + 22) +#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23) + + +extern void ifxmips_mask_and_ack_irq(unsigned int irq_nr); + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_led.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_led.h new file mode 100644 index 0000000000..c97657a89f --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_led.h @@ -0,0 +1,26 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2007 John Crispin + */ +#ifndef _IFXMIPS_LED_H__ +#define _IFXMIPS_LED_H__ + +extern void ifxmips_led_set(unsigned int led); +extern void ifxmips_led_clear(unsigned int led); +extern void ifxmips_led_blink_set(unsigned int led); +extern void ifxmips_led_blink_clear(unsigned int led); + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei.h new file mode 100644 index 0000000000..d8a4b8867f --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei.h @@ -0,0 +1,270 @@ +/****************************************************************************** +** +** FILE NAME : danube_mei.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_H +#define _IFXMIPS_MEI_H +///////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#include "ifxmips_mei_app.h" + +#define IFXMIPS_MEI_DEBUG +#define IFXMIPS_MEI_CMV_EXTRA +#define IFXMIPS_MEI_MAJOR 106 + +/* +** Define where in ME Processor's memory map the Stratify chip lives +*/ + +#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) + +// Mailboxes +#define MSG_LENGTH 16 // x16 bits +#define YES_REPLY 1 +#define NO_REPLY 0 + +#define CMV_TIMEOUT 100 //jiffies +#define MIB_INTERVAL 10000 //msec + +/*** Bit definitions ***/ + +#define FALSE 0 +#define TRUE 1 +#define BIT0 1<<0 +#define BIT1 1<<1 +#define BIT2 1<<2 +#define BIT3 1<<3 +#define BIT4 1<<4 +#define BIT5 1<<5 +#define BIT6 1<<6 +#define BIT7 1<<7 +#define BIT8 1<<8 +#define BIT9 1<<9 +#define BIT10 1<<10 +#define BIT11 1<<11 +#define BIT12 1<<12 +#define BIT13 1<<13 +#define BIT14 1<<14 +#define BIT15 1<<15 +#define BIT16 1<<16 +#define BIT17 1<<17 +#define BIT18 1<<18 +#define BIT19 1<<19 +#define BIT20 1<<20 +#define BIT21 1<<21 +#define BIT22 1<<22 +#define BIT23 1<<23 +#define BIT24 1<<24 +#define BIT25 1<<25 +#define BIT26 1<<26 +#define BIT27 1<<27 +#define BIT28 1<<28 +#define BIT29 1<<29 +#define BIT30 1<<30 +#define BIT31 1<<31 + +// ARC register addresss +#define ARC_STATUS 0x0 +#define ARC_LP_START 0x2 +#define ARC_LP_END 0x3 +#define ARC_DEBUG 0x5 +#define ARC_INT_MASK 0x10A + +#define IRAM0_BASE (0x00000) +#define IRAM1_BASE (0x04000) +#define BRAM_BASE (0x0A000) + +#define ADSL_BASE (0x20000) +#define CRI_BASE (ADSL_BASE + 0x11F00) +#define CRI_CCR0 (CRI_BASE + 0x00) +#define CRI_RST (CRI_BASE + 0x04*4) +#define ADSL_DILV_BASE (ADSL_BASE+0x20000) + +// +#define IRAM0_ADDR_BIT_MASK 0xFFF +#define IRAM1_ADDR_BIT_MASK 0xFFF +#define BRAM_ADDR_BIT_MASK 0xFFF +#define RX_DILV_ADDR_BIT_MASK 0x1FFF + +// CRI_CCR0 Register definitions +#define CLK_2M_MODE_ENABLE BIT6 +#define ACL_CLK_MODE_ENABLE BIT4 +#define FDF_CLK_MODE_ENABLE BIT2 +#define STM_CLK_MODE_ENABLE BIT0 + +// CRI_RST Register definitions +#define FDF_SRST BIT3 +#define MTE_SRST BIT2 +#define FCI_SRST BIT1 +#define AAI_SRST BIT0 + +// MEI_TO_ARC_INTERRUPT Register definitions +#define MEI_TO_ARC_INT1 BIT3 +#define MEI_TO_ARC_INT0 BIT2 +#define MEI_TO_ARC_CS_DONE BIT1 //need to check +#define MEI_TO_ARC_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT Register definitions +#define ARC_TO_MEI_INT1 BIT8 +#define ARC_TO_MEI_INT0 BIT7 +#define ARC_TO_MEI_CS_REQ BIT6 +#define ARC_TO_MEI_DBG_DONE BIT5 +#define ARC_TO_MEI_MSGACK BIT4 +#define ARC_TO_MEI_NO_ACCESS BIT3 +#define ARC_TO_MEI_CHECK_AAITX BIT2 +#define ARC_TO_MEI_CHECK_AAIRX BIT1 +#define ARC_TO_MEI_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT_MASK Register definitions +#define GP_INT1_EN BIT8 +#define GP_INT0_EN BIT7 +#define CS_REQ_EN BIT6 +#define DBG_DONE_EN BIT5 +#define MSGACK_EN BIT4 +#define NO_ACC_EN BIT3 +#define AAITX_EN BIT2 +#define AAIRX_EN BIT1 +#define MSGAV_EN BIT0 + +#define MEI_SOFT_RESET BIT0 + +#define HOST_MSTR BIT0 + +#define JTAG_MASTER_MODE 0x0 +#define MEI_MASTER_MODE HOST_MSTR + +// MEI_DEBUG_DECODE Register definitions +#define MEI_DEBUG_DEC_MASK (0x3) +#define MEI_DEBUG_DEC_AUX_MASK (0x0) +#define MEI_DEBUG_DEC_DMP1_MASK (0x1) +#define MEI_DEBUG_DEC_DMP2_MASK (0x2) +#define MEI_DEBUG_DEC_CORE_MASK (0x3) + +#define AUX_STATUS (0x0) +// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate +// page swap requests. +#define MEI_TO_ARC_MAILBOX (0xDFD0) +#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C) + +#define ARC_TO_MEI_MAILBOX (0xDFA0) +#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C) + +// Codeswap request messages are indicated by setting BIT31 +#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) + +// Clear Eoc messages received are indicated by setting BIT17 +#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000) + +/* +** Swap page header +*/ +// Page must be loaded at boot time if size field has BIT31 set +#define BOOT_FLAG (BIT31) +#define BOOT_FLAG_MASK ~BOOT_FLAG + +#define FREE_RELOAD 1 +#define FREE_SHOWTIME 2 +#define FREE_ALL 3 + +#define IFX_POP_EOC_DONE 0 +#define IFX_POP_EOC_FAIL -1 + +#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered + +// marcos +#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0) +#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) +#define SET_BIT(reg, mask) reg |= (mask) +#define CLEAR_BIT(reg, mask) reg &= (~mask) +#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) +#define SET_BITS(reg, mask) SET_BIT(reg, mask) +#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} + +#define ALIGN_SIZE ( 1L<<10 ) //1K size align +#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) ) + +// swap marco +#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);} +#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);} + +// Swap page header describes size in 32-bit words, load location, and image offset +// for program and/or data segments +typedef struct _arc_swp_page_hdr { + u32 p_offset; //Offset bytes of progseg from beginning of image + u32 p_dest; //Destination addr of progseg on processor + u32 p_size; //Size in 32-bitwords of program segment + u32 d_offset; //Offset bytes of dataseg from beginning of image + u32 d_dest; //Destination addr of dataseg on processor + u32 d_size; //Size in 32-bitwords of data segment +} ARC_SWP_PAGE_HDR; + +#ifdef CONFIG_PROC_FS +typedef struct reg_entry { + int *flag; + char name[30]; // big enough to hold names + char description[100]; // big enough to hold description + unsigned short low_ino; +} reg_entry_t; +#endif + +/* +** Swap image header +*/ +#define GET_PROG 0 // Flag used for program mem segment +#define GET_DATA 1 // Flag used for data mem segment + +// Image header contains size of image, checksum for image, and count of +// page headers. Following that are 'count' page headers followed by +// the code and/or data segments to be loaded +typedef struct _arc_img_hdr { + u32 size; // Size of binary image in bytes + u32 checksum; // Checksum for image + u32 count; // Count of swp pages in image + ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy +} ARC_IMG_HDR; + +typedef struct smmu_mem_info { + int type; + unsigned long nCopy; + unsigned long size; + unsigned char *address; + unsigned char *org_address; +} smmu_mem_info_t; + +/* +** Native size for the Stratiphy interface is 32-bits. All reads and writes +** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or +** byte data. Read routines are provided. Write routines are probably a bad idea, as the +** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle +** could very well have unintended results. +*/ +MEI_ERROR meiCMV (u16 *, int, u16 *); // first arg is CMV to ARC, second to indicate whether need reply + +MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize); +extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len); +extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len); +#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS) +extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, + u16 * data, u16 * CMVMSG); +int ifx_mei_hdlc_send (char *, int); +int ifx_mei_hdlc_read (char *, int); +#endif + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app.h new file mode 100644 index 0000000000..cba742e58a --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app.h @@ -0,0 +1,116 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_app.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_APP_H +#define _IFXMIPS_MEI_APP_H + // ioctl control +#define IFXMIPS_MEI_START 300 +#define IFXMIPS_MEI_REPLY 301 +#define IFXMIPS_MEI_NOREPLY 302 + +#define IFXMIPS_MEI_RESET 303 +#define IFXMIPS_MEI_REBOOT 304 +#define IFXMIPS_MEI_HALT 305 +#define IFXMIPS_MEI_CMV_WINHOST 306 +#define IFXMIPS_MEI_CMV_READ 307 +#define IFXMIPS_MEI_CMV_WRITE 308 +#define IFXMIPS_MEI_MIB_DAEMON 309 +#define IFXMIPS_MEI_SHOWTIME 310 +#define IFXMIPS_MEI_REMOTE 311 +#define IFXMIPS_MEI_READDEBUG 312 +#define IFXMIPS_MEI_WRITEDEBUG 313 +#define IFXMIPS_MEI_LOP 314 + +#define IFXMIPS_MEI_PCM_SETUP 315 +#define IFXMIPS_MEI_PCM_START_TIMER 316 +#define IFXMIPS_MEI_PCM_STOP_TIMER 317 +#define IFXMIPS_MEI_PCM_CHECK 318 +#define IFXMIPS_MEI_GET_EOC_LEN 319 +#define IFXMIPS_MEI_GET_EOC_DATA 320 +#define IFXMIPS_MEI_PCM_GETDATA 321 +#define IFXMIPS_MEI_PCM_GPIO 322 +#define IFXMIPS_MEI_EOC_SEND 323 +#define IFXMIPS_MEI_DOWNLOAD 326 +#define IFXMIPS_MEI_JTAG_ENABLE 327 +#define IFXMIPS_MEI_RUN 328 +#define IFXMIPS_MEI_DEBUG_MODE 329 + +/* Loop diagnostics mode of the ADSL line related constants */ +#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 330 +#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 331 +#define LOOP_DIAGNOSTIC_MODE_COMPLETE 332 +#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 333 + +/* L3 Power Mode */ +/* Get current Power Moaagement Mode Status*/ +#define GET_POWER_MANAGEMENT_MODE 334 +/* Set L3 Power Mode /disable L3 power mode */ +#define SET_L3_POWER_MODE 335 + +/* get current dual latency configuration */ +#define GET_ADSL_DUAL_LATENCY 336 +/* enable/disable dual latency path */ +#define SET_ADSL_DUAL_LATENCY 337 + +/* Enable/Disable autoboot mode. */ +/* When the autoboot mode is disabled, the driver will excute some cmv + commands for led control and dual latency when DSL startup.*/ +#define AUTOBOOT_ENABLE_SET 338 + +/* Enable/Disable Quiet Mode*/ +/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */ +#define QUIET_MODE_GET 339 +#define QUIET_MODE_SET 340 + +/* Enable/Disable showtime lock*/ +/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */ +#define SHOWTIME_LOCK_GET 341 +#define SHOWTIME_LOCK_SET 342 + +#define L0_POWER_MODE 0 +#define L2_POWER_MODE 2 +#define L3_POWER_MODE 3 + +#define DUAL_LATENCY_US_DS_DISABLE 0 +#define DUAL_LATENCY_US_ENABLE (1<<0) +#define DUAL_LATENCY_DS_ENABLE (1<<1) +#define DUAL_LATENCY_US_DS_ENABLE (DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE) + +#define ME_HDLC_IDLE 0 +#define ME_HDLC_INVALID_MSG 1 +#define ME_HDLC_MSG_QUEUED 2 +#define ME_HDLC_MSG_SENT 3 +#define ME_HDLC_RESP_RCVD 4 +#define ME_HDLC_RESP_TIMEOUT 5 +#define ME_HDLC_RX_BUF_OVERFLOW 6 +#define ME_HDLC_UNRESOLVED 1 +#define ME_HDLC_RESOLVED 2 + +/*** Enums ***/ +typedef enum mei_error { + MEI_SUCCESS = 0, + MEI_FAILURE = -1, + MEI_MAILBOX_FULL = -2, + MEI_MAILBOX_EMPTY = -3, + MEI_MAILBOX_TIMEOUT = -4, +} MEI_ERROR; + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app_ioctl.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app_ioctl.h new file mode 100644 index 0000000000..08c3dd3fc1 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app_ioctl.h @@ -0,0 +1,1191 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_app_ioctl.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef __IFXMIPS_MEI_APP_IOCTL_H +#define __IFXMIPS_MEI_APP_IOCTL_H + +#ifdef __KERNEL__ +#include "ifxmips_mei_ioctl.h" +#endif + +/* Interface Name */ +//#define INTERFACE_NAME + +/* adslLineTable constants */ +#define GET_ADSL_LINE_CODE 1 + +/* adslAtucPhysTable constants */ +#define GET_ADSL_ATUC_PHY 4 + +/* adslAturPhysTable constants */ +#define GET_ADSL_ATUR_PHY 10 + +/* adslAtucChanTable constants */ +#define GET_ADSL_ATUC_CHAN_INFO 15 + +/* adslAturChanTable constants */ +#define GET_ADSL_ATUR_CHAN_INFO 18 + +/* adslAtucPerfDataTable constants */ +#define GET_ADSL_ATUC_PERF_DATA 21 + +/* adslAturPerfDataTable constants */ +#define GET_ADSL_ATUR_PERF_DATA 40 + +/* adslAtucIntervalTable constants */ +#define GET_ADSL_ATUC_INTVL_INFO 60 + +/* adslAturIntervalTable constants */ +#define GET_ADSL_ATUR_INTVL_INFO 65 + +/* adslAtucChanPerfDataTable constants */ +#define GET_ADSL_ATUC_CHAN_PERF_DATA 70 + +/* adslAturChanPerfDataTable constants */ +#define GET_ADSL_ATUR_CHAN_PERF_DATA 90 + +/* adslAtucChanIntervalTable constants */ +#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110 + +/* adslAturChanIntervalTable constants */ +#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115 + +/* adslLineAlarmConfProfileTable constants */ +#define GET_ADSL_ALRM_CONF_PROF 120 +#define SET_ADSL_ALRM_CONF_PROF 121 + +/* adslAturTrap constants */ +#define ADSL_ATUR_TRAPS 135 + +////////////////// RFC-3440 ////////////// + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +/* adslLineExtTable */ +#define GET_ADSL_ATUC_LINE_EXT 201 +#define SET_ADSL_ATUC_LINE_EXT 203 + +/* adslAtucPerfDateExtTable */ +#define GET_ADSL_ATUC_PERF_DATA_EXT 205 + +/* adslAtucIntervalExtTable */ +#define GET_ADSL_ATUC_INTVL_EXT_INFO 221 + +/* adslAturPerfDataExtTable */ +#define GET_ADSL_ATUR_PERF_DATA_EXT 225 + +/* adslAturIntervalExtTable */ +#define GET_ADSL_ATUR_INTVL_EXT_INFO 233 + +/* adslAlarmConfProfileExtTable */ +#define GET_ADSL_ALRM_CONF_PROF_EXT 235 +#define SET_ADSL_ALRM_CONF_PROF_EXT 236 + +/* adslAturExtTrap */ +#define ADSL_ATUR_EXT_TRAPS 240 + +#endif + +/* The following constants are added to support the WEB related ADSL Statistics */ + +/* adslLineStatus constants */ +#define GET_ADSL_LINE_STATUS 245 + +/* adslLineRate constants */ +#define GET_ADSL_LINE_RATE 250 + +/* adslLineInformation constants */ +#define GET_ADSL_LINE_INFO 255 + +/* adslNearEndPerformanceStats constants */ +#define GET_ADSL_NEAREND_STATS 270 + +/* adslFarEndPerformanceStats constants */ +#define GET_ADSL_FAREND_STATS 290 + +/* Sub-carrier related parameters */ +#define GET_ADSL_LINE_INIT_STATS 150 +#define GET_ADSL_POWER_SPECTRAL_DENSITY 151 + +#define IFXMIPS_MIB_LO_ATUC 295 +#define IFXMIPS_MIB_LO_ATUR 296 + +#define GET_ADSL_ATUC_SUBCARRIER_STATS 297 +#define GET_ADSL_ATUR_SUBCARRIER_STATS 298 + + + +/////////////////////////////////////////////////////////// +// makeCMV(Opcode, Group, Address, Index, Size, Data) + +/* adslLineCode Flags */ +#define LINE_CODE_FLAG 0x1 /* BIT 0th position */ + +/* adslAtucPhysTable Flags */ +#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage) +#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage) + +#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ +#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage) + +#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ +#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage) + +#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */ + +#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */ +#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage) + +#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */ +#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage) + + +/* adslAturPhysTable Flags */ +#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage) +#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage) + +#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ +#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage) + +#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ +#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage) + +#define ATUR_SNRMGN_FLAG 0x8 +#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */ +#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage) +#else +#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage) +#endif + +#define ATUR_ATTN_FLAG 0x10 +#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage) + +#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */ + +#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */ +#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage) + +#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */ +#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage) + +/* adslAtucChanTable Flags */ +#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ +//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage) +#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage) + +#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ +#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage) + +#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ + +/* adslAturChanTable Flags */ +#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ +//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage) +#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage) + +#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ +#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage) + +#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ + +#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */ + +/* adslAtucPerfDataTable Flags */ +#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage) +#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */ +#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage) +#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */ +#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ +#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ +#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ +#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ +#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */ +#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */ +#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ +#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ +#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */ +#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */ +#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ +#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ +#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */ +#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */ + +/* adslAturPerfDataTable Flags */ +#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ +#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */ +#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */ +#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage) +#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */ +#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage) +#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ +#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ +#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ +#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ +#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */ +#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */ +#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ +#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ +#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */ +#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */ +#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ +#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ +#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */ +#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */ + +/* adslAtucIntervalTable Flags */ +#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ +#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */ +#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */ +#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */ +#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ + +/* adslAturIntervalTable Flags */ +#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ +#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */ +#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */ +#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */ +#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ + +/* adslAtucChanPerfDataTable Flags */ +#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ +#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ +#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ +#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ +#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ +#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ +#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ +#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ +#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ +#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ +#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/ +#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ +#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ +#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ +#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ +#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ +#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */ +#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ +#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ + + +/* adslAturChanPerfDataTable Flags */ +#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ +#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage) +#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage) +#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ +#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage) +#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage) +#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ +#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage) +#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage) +#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ +#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage) +#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage) +#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ +#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ +#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ +#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ +#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ +#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ +#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ +#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ +#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ +#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ +#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ +#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */ +#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ +#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ + +/* adslAtucChanIntervalTable Flags */ +#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ +#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ +#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ +#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ +#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ + +/* adslAturChanIntervalTable Flags */ +#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */ +#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ +#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ +#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ +#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ +#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ + +/* adslLineAlarmConfProfileTable Flags */ +#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */ +#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */ +#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */ +#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */ +#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */ +#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */ +#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */ +#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */ +#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */ +#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */ +#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */ +#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */ +#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */ +#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */ +#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */ +#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */ +#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */ + + +/* adslAturTraps Flags */ +#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */ +#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */ +#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */ +#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */ +#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */ +#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */ +#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */ + +//RFC- 3440 FLAG DEFINITIONS + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +/* adslLineExtTable flags */ +#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */ +#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage) +#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */ +#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage) +#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage) +#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */ +#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage) +#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */ +#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage) + +/* adslAtucPerfDataExtTable flags */ +#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) +#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) +#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */ +#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage) +#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */ +#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage) +#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */ +#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */ +#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */ +#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */ +#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */ +#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */ +#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */ +#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */ +#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */ +#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */ +#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */ +#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */ + +/* adslAturPerfDataExtTable */ +#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */ +#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage) +#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */ +#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage) +#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */ +#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */ +#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */ +#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */ +#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */ +#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */ + +/* adslAutcIntervalExtTable flags */ +#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */ +#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */ +#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */ +#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */ + +/* adslAturIntervalExtTable */ +#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */ +#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */ + +/* adslAlarmConfProfileExtTable */ +#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */ +#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */ +#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */ +#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */ +#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */ + +/* adslAturExtTraps */ +#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */ +#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */ +#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */ +#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */ +#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */ + +#endif + +/* adslLineStatus Flags */ +#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */ +#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) +#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */ +#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage) +#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */ +#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage) +#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */ +#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage) + +/* adslLineRate Flags */ +#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */ +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage) + + +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage) + +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage) + +#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */ +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage) + + +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage) + +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage) + +#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */ +#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage) + +#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */ +#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage) + +/* adslLineInformation Flags */ +#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */ +#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage) +#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage) +#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */ +#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage) +#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage) +#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */ +#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage) +#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */ +#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage) +#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */ +#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage) +#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */ +#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage) +#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */ +#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage) +#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage) +#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage) +#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */ +#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage) +#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */ +#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage) +#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */ +#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage) + +/* adslNearEndPerformanceStats Flags */ +#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage) +#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage) +#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */ +#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage) +#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */ +#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */ +#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */ +#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */ +#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */ +#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */ +#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage) +#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage) +#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage) +#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage) +#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */ +#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage) +#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */ +#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage) +#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */ +#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage) +#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */ +#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage) +#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */ +#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage) +#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */ +#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage) +#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage) +#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */ + +/* adslFarEndPerformanceStats Flags */ +#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage) +#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */ +#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */ +#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */ +#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */ +#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */ +#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage) +#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage) +#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */ +#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage) +#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage) +#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */ +#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage) +#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */ +#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage) +#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */ +#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage) +#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */ +#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage) +#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */ +#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage) +#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */ +#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage) +#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage) +#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */ +// 603221:tc.chen end +/* TR-69 related additional parameters - defines */ +/* Defines for struct adslATURSubcarrierInfo */ +#define NEAREND_HLINSC 0x1 +#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data, TxMessage) +#define NEAREND_HLINPS 0x2 +#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data, TxMessage) +#define NEAREND_HLOGMT 0x4 +#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data, TxMessage) +#define NEAREND_HLOGPS 0x8 +#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data, TxMessage) +#define NEAREND_QLNMT 0x10 +#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data, TxMessage) +#define NEAREND_QLNPS 0x20 +#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data, TxMessage) +#define NEAREND_SNRMT 0x40 +#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data, TxMessage) +#define NEAREND_SNRPS 0x80 +#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data, TxMessage) +#define NEAREND_BITPS 0x100 +#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data, TxMessage) +#define NEAREND_GAINPS 0x200 +#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data, TxMessage) + +/* Defines for struct adslATUCSubcarrierInfo */ +#define FAREND_HLINSC 0x1 + +/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */ +#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 2, 1, data, TxMessage) +#define FAREND_HLINPS 0x2 +#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data, TxMessage) +#define FAREND_HLOGMT 0x4 +#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data, TxMessage) +#define FAREND_HLOGPS 0x8 +#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data, TxMessage) +#define FAREND_QLNMT 0x10 +#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data, TxMessage) +#define FAREND_QLNPS 0x20 +#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data, TxMessage) +#define FAREND_SNRMT 0x40 +#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data, TxMessage) +#define FAREND_SNRPS 0x80 +#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 11, idx, size, data, TxMessage) +#define FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data, TxMessage) +#define FAREND_BITPS 0x100 +#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data, TxMessage) +#define FAREND_GAINPS 0x200 +#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data, TxMessage) + + +// GET_ADSL_POWER_SPECTRAL_DENSITY +#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage) +#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage) +#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage) +#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage) +#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage) +#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage) + +/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing + +#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val)) +// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer + +#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0) +// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer + + +#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit)) +// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer + + +////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION + +//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type. + // +#define u32 unsigned int +#define u16 unsigned short +#define s16 short +#define u8 unsigned char + + +typedef u32 AdslPerfTimeElapsed; +typedef u32 AdslPerfPrevDayCount; +typedef u32 PerfCurrentCount; +typedef u32 PerfIntervalCount; +typedef u32 AdslPerfCurrDayCount; + + +//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry) + +typedef struct adslLineTableEntry { + int ifIndex; + int adslLineCode; + u8 flags; +} adslLineTableEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslLineExtTableEntry { + int ifIndex; + u16 adslLineTransAtucCap; + u16 adslLineTransAtucConfig; + u16 adslLineTransAtucActual; + int adslLineGlitePowerState; + u32 flags; +}adslLineExtTableEntry; +#endif +//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry) +#ifndef u_char +#define u_char u8 +#endif + +typedef struct adslVendorId { + u16 country_code; + u_char provider_id[4]; /* Ascii characters */ + u_char revision_info[2]; +}adslVendorId; + +typedef struct adslAtucPhysEntry { + int ifIndex; + char serial_no[32]; + union { + char vendor_id[16]; + adslVendorId vendor_info; + } vendor_id; + char version_no[16]; + u32 status; + int outputPwr; + u32 attainableRate; + u8 flags; +} adslAtucPhysEntry; + + +//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry) + +typedef struct adslAturPhysEntry { + int ifIndex; + char serial_no[32]; + union { + char vendor_id[16]; + adslVendorId vendor_info; + } vendor_id; + char version_no[16]; + int SnrMgn; + u32 Attn; + u32 status; + int outputPwr; + u32 attainableRate; + u8 flags; +} adslAturPhysEntry; + + +//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo) + +typedef struct adslAtucChanInfo { + int ifIndex; + u32 interleaveDelay; + u32 currTxRate; + u32 prevTxRate; + u8 flags; +} adslAtucChanInfo; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo) + +typedef struct adslAturChanInfo { + int ifIndex; + u32 interleaveDelay; + u32 currTxRate; + u32 prevTxRate; + u32 crcBlkLen; + u8 flags; +} adslAturChanInfo; + + +//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry) + +typedef struct atucPerfDataEntry +{ + int ifIndex; + u32 adslAtucPerfLofs; + u32 adslAtucPerfLoss; + u32 adslAtucPerfESs; + u32 adslAtucPerfInits; + int adslAtucPerfValidIntervals; + int adslAtucPerfInvalidIntervals; + AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAtucPerfCurr15MinLofs; + PerfCurrentCount adslAtucPerfCurr15MinLoss; + PerfCurrentCount adslAtucPerfCurr15MinESs; + PerfCurrentCount adslAtucPerfCurr15MinInits; + AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs; + AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss; + AdslPerfCurrDayCount adslAtucPerfCurr1DayESs; + AdslPerfCurrDayCount adslAtucPerfCurr1DayInits; + int adslAtucPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss; + AdslPerfPrevDayCount adslAtucPerfPrev1DayESs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayInits; + u32 flags; +} atucPerfDataEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct atucPerfDataExtEntry + { + int ifIndex; + u32 adslAtucPerfStatFastR; + u32 adslAtucPerfStatFailedFastR; + u32 adslAtucPerfStatSesL; + u32 adslAtucPerfStatUasL; + u32 adslAtucPerfCurr15MinFastR; + u32 adslAtucPerfCurr15MinFailedFastR; + u32 adslAtucPerfCurr15MinSesL; + u32 adslAtucPerfCurr15MinUasL; + u32 adslAtucPerfCurr1DayFastR; + u32 adslAtucPerfCurr1DayFailedFastR; + u32 adslAtucPerfCurr1DaySesL; + u32 adslAtucPerfCurr1DayUasL; + u32 adslAtucPerfPrev1DayFastR; + u32 adslAtucPerfPrev1DayFailedFastR; + u32 adslAtucPerfPrev1DaySesL; + u32 adslAtucPerfPrev1DayUasL; + u32 flags; +} atucPerfDataExtEntry; + +#endif +//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry) + +typedef struct aturPerfDataEntry +{ + int ifIndex; + u32 adslAturPerfLofs; + u32 adslAturPerfLoss; + u32 adslAturPerfLprs; + u32 adslAturPerfESs; + int adslAturPerfValidIntervals; + int adslAturPerfInvalidIntervals; + AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAturPerfCurr15MinLofs; + PerfCurrentCount adslAturPerfCurr15MinLoss; + PerfCurrentCount adslAturPerfCurr15MinLprs; + PerfCurrentCount adslAturPerfCurr15MinESs; + AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAturPerfCurr1DayLofs; + AdslPerfCurrDayCount adslAturPerfCurr1DayLoss; + AdslPerfCurrDayCount adslAturPerfCurr1DayLprs; + AdslPerfCurrDayCount adslAturPerfCurr1DayESs; + int adslAturPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAturPerfPrev1DayLofs; + AdslPerfPrevDayCount adslAturPerfPrev1DayLoss; + AdslPerfPrevDayCount adslAturPerfPrev1DayLprs; + AdslPerfPrevDayCount adslAturPerfPrev1DayESs; + u32 flags; +} aturPerfDataEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct aturPerfDataExtEntry + { + int ifIndex; + u32 adslAturPerfStatSesL; + u32 adslAturPerfStatUasL; + u32 adslAturPerfCurr15MinSesL; + u32 adslAturPerfCurr15MinUasL; + u32 adslAturPerfCurr1DaySesL; + u32 adslAturPerfCurr1DayUasL; + u32 adslAturPerfPrev1DaySesL; + u32 adslAturPerfPrev1DayUasL; + u32 flags; +} aturPerfDataExtEntry; +#endif +//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo) + +typedef struct adslAtucIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount intervalLOF; + PerfIntervalCount intervalLOS; + PerfIntervalCount intervalES; + PerfIntervalCount intervalInits; + int intervalValidData; + u8 flags; +} adslAtucIntvlInfo; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslAtucInvtlExtInfo + { + int ifIndex; + int IntervalNumber; + u32 adslAtucIntervalFastR; + u32 adslAtucIntervalFailedFastR; + u32 adslAtucIntervalSesL; + u32 adslAtucIntervalUasL; + u32 flags; +} adslAtucInvtlExtInfo; +#endif +//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo) + +typedef struct adslAturIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount intervalLOF; + PerfIntervalCount intervalLOS; + PerfIntervalCount intervalLPR; + PerfIntervalCount intervalES; + int intervalValidData; + u8 flags; +} adslAturIntvlInfo; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslAturInvtlExtInfo + { + int ifIndex; + int IntervalNumber; + u32 adslAturIntervalSesL; + u32 adslAturIntervalUasL; + u32 flags; +} adslAturInvtlExtInfo; +#endif +//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry) + +typedef struct atucChannelPerfDataEntry +{ + int ifIndex; + u32 adslAtucChanReceivedBlks; + u32 adslAtucChanTransmittedBlks; + u32 adslAtucChanCorrectedBlks; + u32 adslAtucChanUncorrectBlks; + int adslAtucChanPerfValidIntervals; + int adslAtucChanPerfInvalidIntervals; + AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks; + AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks; + int adslAtucChanPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks; + u32 flags; +}atucChannelPerfDataEntry; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry) + +typedef struct aturChannelPerfDataEntry +{ + int ifIndex; + u32 adslAturChanReceivedBlks; + u32 adslAturChanTransmittedBlks; + u32 adslAturChanCorrectedBlks; + u32 adslAturChanUncorrectBlks; + int adslAturChanPerfValidIntervals; + int adslAturChanPerfInvalidIntervals; + AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks; + AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks; + int adslAturChanPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks; + u32 flags; +} aturChannelPerfDataEntry; + + +//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo) + +typedef struct adslAtucChanIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount chanIntervalRecvdBlks; + PerfIntervalCount chanIntervalXmitBlks; + PerfIntervalCount chanIntervalCorrectedBlks; + PerfIntervalCount chanIntervalUncorrectBlks; + int intervalValidData; + u8 flags; +} adslAtucChanIntvlInfo; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo) + +typedef struct adslAturChanIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount chanIntervalRecvdBlks; + PerfIntervalCount chanIntervalXmitBlks; + PerfIntervalCount chanIntervalCorrectedBlks; + PerfIntervalCount chanIntervalUncorrectBlks; + int intervalValidData; + u8 flags; +} adslAturChanIntvlInfo; + + +//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) +//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) + +typedef struct adslLineAlarmConfProfileEntry + { + unsigned char adslLineAlarmConfProfileName[32]; + int adslAtucThresh15MinLofs; + int adslAtucThresh15MinLoss; + int adslAtucThresh15MinESs; + u32 adslAtucThreshFastRateUp; + u32 adslAtucThreshInterleaveRateUp; + u32 adslAtucThreshFastRateDown; + u32 adslAtucThreshInterleaveRateDown; + int adslAtucInitFailureTrapEnable; + int adslAturThresh15MinLofs; + int adslAturThresh15MinLoss; + int adslAturThresh15MinLprs; + int adslAturThresh15MinESs; + u32 adslAturThreshFastRateUp; + u32 adslAturThreshInterleaveRateUp; + u32 adslAturThreshFastRateDown; + u32 adslAturThreshInterleaveRateDown; + int adslLineAlarmConfProfileRowStatus; + u32 flags; +} adslLineAlarmConfProfileEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslLineAlarmConfProfileExtEntry + { + u8 adslLineAlarmConfProfileExtName[32]; + u32 adslAtucThreshold15MinFailedFastR; + u32 adslAtucThreshold15MinSesL; + u32 adslAtucThreshold15MinUasL; + u32 adslAturThreshold15MinSesL; + u32 adslAturThreshold15MinUasL; + u32 flags; +} adslLineAlarmConfProfileExtEntry; +#endif +//TRAPS + +/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */ +typedef struct adslLineStatus + { + int adslModemStatus; + u32 adslModeSelected; + int adslAtucThresh15MinESs; + int adslTrellisCodeEnable; + int adslLatency; + u8 flags; + } adslLineStatusInfo; + +typedef struct adslLineRate + { + u32 adslDataRateds; + u32 adslDataRateus; + u32 adslATTNDRds; + u32 adslATTNDRus; + u8 flags; + } adslLineRateInfo; + +typedef struct adslLineInfo + { + u32 adslInterleaveDepthds; + u32 adslInterleaveDepthus; + u32 adslLATNds; + u32 adslLATNus; + u32 adslSATNds; + u32 adslSATNus; + int adslSNRMds; + int adslSNRMus; + int adslACATPds; + int adslACATPus; + u32 flags; + } adslLineInfo; + +typedef struct adslNearEndPerfStats + { + u32 adslSuperFrames; + u32 adslneLOS; + u32 adslneLOF; + u32 adslneLPR; + u32 adslneNCD; + u32 adslneLCD; + u32 adslneCRC; + u32 adslneRSCorr; + u32 adslneFECS; + u32 adslneES; + u32 adslneSES; + u32 adslneLOSS; + u32 adslneUAS; + u32 adslneHECErrors; + u32 flags; + } adslNearEndPerfStats; + +typedef struct adslFarEndPerfStats + { + u32 adslfeLOS; + u32 adslfeLOF; + u32 adslfeLPR; + u32 adslfeNCD; + u32 adslfeLCD; + u32 adslfeCRC; + u32 adslfeRSCorr; + u32 adslfeFECS; + u32 adslfeES; + u32 adslfeSES; + u32 adslfeLOSS; + u32 adslfeUAS; + u32 adslfeHECErrors; + u32 flags; + } adslFarEndPerfStats; + +/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */ +typedef struct adslATURSubcarrierInfo { + int ifindex; + u16 HLINSCds; + u16 HLINpsds[1024];/* Even index = real part; Odd Index + = imaginary part for each tone */ + u16 HLOGMTds; + u16 HLOGpsds[512]; + u16 QLNMTds; + u16 QLNpsds[512]; + u16 SNRMTds; + u16 SNRpsds[512]; + u16 BITpsds[512]; + s16 GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10. + Needs to be converted into linear scale*/ + u16 flags; +}adslATURSubcarrierInfo; + +typedef struct adslATUCSubcarrierInfo { + int ifindex; + u16 HLINSCus; + u16 HLINpsus[128];/* Even index = real part; Odd Index + = imaginary part for each tone */ + u16 HLOGMTus; + u16 HLOGpsus[64]; + u16 QLNMTus; + u16 QLNpsus[64]; + u16 SNRMTus; + u16 SNRpsus[64]; + u16 BITpsus[64]; + s16 GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10. + Needs to be converted into linear scale*/ + u16 flags; +}adslATUCSubcarrierInfo; + +#ifndef u_int16 +#define u_int16 u16 +#endif + +typedef struct adslInitStats { + u_int16 FullInitializationCount; + u_int16 FailedFullInitializationCount; + u_int16 LINIT_Errors; + u_int16 Init_Timeouts; +}adslInitStats; + +typedef struct adslPowerSpectralDensity { + int ACTPSDds; + int ACTPSDus; +}adslPowerSpectralDensity; + +//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags) +typedef union structpts { + adslLineTableEntry * adslLineTableEntry_pt; + adslAtucPhysEntry * adslAtucPhysEntry_pt; + adslAturPhysEntry * adslAturPhysEntry_pt; + adslAtucChanInfo * adslAtucChanInfo_pt; + adslAturChanInfo * adslAturChanInfo_pt; + atucPerfDataEntry * atucPerfDataEntry_pt; + aturPerfDataEntry * aturPerfDataEntry_pt; + adslAtucIntvlInfo * adslAtucIntvlInfo_pt; + adslAturIntvlInfo * adslAturIntvlInfo_pt; + atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt; + aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt; + adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt; + adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt; + adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt; + // RFC 3440 + + #ifdef IFXMIPS_MEI_MIB_RFC3440 + adslLineExtTableEntry * adslLineExtTableEntry_pt; + atucPerfDataExtEntry * atucPerfDataExtEntry_pt; + adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt; + aturPerfDataExtEntry * aturPerfDataExtEntry_pt; + adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt; + adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt; + #endif + adslLineStatusInfo * adslLineStatusInfo_pt; + adslLineRateInfo * adslLineRateInfo_pt; + adslLineInfo * adslLineInfo_pt; + adslNearEndPerfStats * adslNearEndPerfStats_pt; + adslFarEndPerfStats * adslFarEndPerfStats_pt; + adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt; + adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt; + adslPowerSpectralDensity * adslPowerSpectralDensity_pt; +}structpts; + +#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */ diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_bsp.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_bsp.h new file mode 100644 index 0000000000..c34662013c --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_bsp.h @@ -0,0 +1,308 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_bsp.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_BSP_H_ +#define _IFXMIPS_MEI_BSP_H_ + +/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ +#define MEI_DATA_XFR_OFFSET (0x0000) +#define MEI_VERSION_OFFSET (0x0004) +#define MEI_ARC_GP_STAT_OFFSET (0x0008) +#define MEI_DATA_XFR_STAT_OFFSET (0x000C) +#define MEI_XFR_ADDR_OFFSET (0x0010) +#define MEI_MAX_WAIT_OFFSET (0x0014) +#define MEI_TO_ARC_INT_OFFSET (0x0018) +#define ARC_TO_MEI_INT_OFFSET (0x001C) +#define ARC_TO_MEI_INT_MASK_OFFSET (0x0020) +#define MEI_DEBUG_WAD_OFFSET (0x0024) +#define MEI_DEBUG_RAD_OFFSET (0x0028) +#define MEI_DEBUG_DATA_OFFSET (0x002C) +#define MEI_DEBUG_DEC_OFFSET (0x0030) +#define MEI_CONFIG_OFFSET (0x0034) +#define MEI_RST_CONTROL_OFFSET (0x0038) +#define MEI_DBG_MASTER_OFFSET (0x003C) +#define MEI_CLK_CONTROL_OFFSET (0x0040) +#define MEI_BIST_CONTROL_OFFSET (0x0044) +#define MEI_BIST_STAT_OFFSET (0x0048) +#define MEI_XDATA_BASE_SH_OFFSET (0x004c) +#define MEI_XDATA_BASE_OFFSET (0x0050) +#define MEI_XMEM_BAR_BASE_OFFSET (0x0054) +#define MEI_XMEM_BAR0_OFFSET (0x0054) +#define MEI_XMEM_BAR1_OFFSET (0x0058) +#define MEI_XMEM_BAR2_OFFSET (0x005C) +#define MEI_XMEM_BAR3_OFFSET (0x0060) +#define MEI_XMEM_BAR4_OFFSET (0x0064) +#define MEI_XMEM_BAR5_OFFSET (0x0068) +#define MEI_XMEM_BAR6_OFFSET (0x006C)) +#define MEI_XMEM_BAR7_OFFSET (0x0070) +#define MEI_XMEM_BAR8_OFFSET (0x0074) +#define MEI_XMEM_BAR9_OFFSET (0x0078) +#define MEI_XMEM_BAR10_OFFSET (0x007C) +#define MEI_XMEM_BAR11_OFFSET (0x0080) +#define MEI_XMEM_BAR12_OFFSET (0x0084) +#define MEI_XMEM_BAR13_OFFSET (0x0088) +#define MEI_XMEM_BAR14_OFFSET (0x008C) +#define MEI_XMEM_BAR15_OFFSET (0x0090) +#define MEI_XMEM_BAR16_OFFSET (0x0094) + +#define WHILE_DELAY 20000 +/* +** Define where in ME Processor's memory map the Stratify chip lives +*/ + +#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) + +// Mailboxes +#define MSG_LENGTH 16 // x16 bits +#define YES_REPLY 1 +#define NO_REPLY 0 + +#define CMV_TIMEOUT 1000 //jiffies + +// Block size per BAR +#define SDRAM_SEGMENT_SIZE (64*1024) +// Number of Bar registers +#define MAX_BAR_REGISTERS (17) + +#define XDATA_REGISTER (15) + +#define IFXMIPS_MEI_IOCTL_CMV_WINHOST IFX_ADSL_IOC_CMV_WINHOST + +#define IFXMIPS_MEI_IOCTL_CMV_READ IFX_ADSL_IOC_CMV_READ +#define IFXMIPS_MEI_IOCTL_CMV_WRITE IFX_ADSL_IOC_CMV_WRITE + +#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS IFX_ADSL_IOC_GET_BASE_ADDRESS + +// ARC register addresss +#define ARC_STATUS 0x0 +#define ARC_LP_START 0x2 +#define ARC_LP_END 0x3 +#define ARC_DEBUG 0x5 +#define ARC_INT_MASK 0x10A + +#define IRAM0_BASE (0x00000) +#define IRAM1_BASE (0x04000) +#define BRAM_BASE (0x0A000) + +#define ADSL_BASE (0x20000) +#define CRI_BASE (ADSL_BASE + 0x11F00) +#define CRI_CCR0 (CRI_BASE + 0x00) +#define CRI_RST (CRI_BASE + 0x04*4) +#define ADSL_DILV_BASE (ADSL_BASE+0x20000) + +// +#define IRAM0_ADDR_BIT_MASK 0xFFF +#define IRAM1_ADDR_BIT_MASK 0xFFF +#define BRAM_ADDR_BIT_MASK 0xFFF +#define RX_DILV_ADDR_BIT_MASK 0x1FFF + +/*** Bit definitions ***/ + +#define FALSE 0 +#define TRUE 1 +#define BIT0 1<<0 +#define BIT1 1<<1 +#define BIT2 1<<2 +#define BIT3 1<<3 +#define BIT4 1<<4 +#define BIT5 1<<5 +#define BIT6 1<<6 +#define BIT7 1<<7 +#define BIT8 1<<8 +#define BIT9 1<<9 +#define BIT10 1<<10 +#define BIT11 1<<11 +#define BIT12 1<<12 +#define BIT13 1<<13 +#define BIT14 1<<14 +#define BIT15 1<<15 +#define BIT16 1<<16 +#define BIT17 1<<17 +#define BIT18 1<<18 +#define BIT19 1<<19 +#define BIT20 1<<20 +#define BIT21 1<<21 +#define BIT22 1<<22 +#define BIT23 1<<23 +#define BIT24 1<<24 +#define BIT25 1<<25 +#define BIT26 1<<26 +#define BIT27 1<<27 +#define BIT28 1<<28 +#define BIT29 1<<29 +#define BIT30 1<<30 +#define BIT31 1<<31 + +// CRI_CCR0 Register definitions +#define CLK_2M_MODE_ENABLE BIT6 +#define ACL_CLK_MODE_ENABLE BIT4 +#define FDF_CLK_MODE_ENABLE BIT2 +#define STM_CLK_MODE_ENABLE BIT0 + +// CRI_RST Register definitions +#define FDF_SRST BIT3 +#define MTE_SRST BIT2 +#define FCI_SRST BIT1 +#define AAI_SRST BIT0 + +// MEI_TO_ARC_INTERRUPT Register definitions +#define MEI_TO_ARC_INT1 BIT3 +#define MEI_TO_ARC_INT0 BIT2 +#define MEI_TO_ARC_CS_DONE BIT1 //need to check +#define MEI_TO_ARC_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT Register definitions +#define ARC_TO_MEI_INT1 BIT8 +#define ARC_TO_MEI_INT0 BIT7 +#define ARC_TO_MEI_CS_REQ BIT6 +#define ARC_TO_MEI_DBG_DONE BIT5 +#define ARC_TO_MEI_MSGACK BIT4 +#define ARC_TO_MEI_NO_ACCESS BIT3 +#define ARC_TO_MEI_CHECK_AAITX BIT2 +#define ARC_TO_MEI_CHECK_AAIRX BIT1 +#define ARC_TO_MEI_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT_MASK Register definitions +#define GP_INT1_EN BIT8 +#define GP_INT0_EN BIT7 +#define CS_REQ_EN BIT6 +#define DBG_DONE_EN BIT5 +#define MSGACK_EN BIT4 +#define NO_ACC_EN BIT3 +#define AAITX_EN BIT2 +#define AAIRX_EN BIT1 +#define MSGAV_EN BIT0 + +#define MEI_SOFT_RESET BIT0 + +#define HOST_MSTR BIT0 + +#define JTAG_MASTER_MODE 0x0 +#define MEI_MASTER_MODE HOST_MSTR + +// MEI_DEBUG_DECODE Register definitions +#define MEI_DEBUG_DEC_MASK (0x3) +#define MEI_DEBUG_DEC_AUX_MASK (0x0) +#define MEI_DEBUG_DEC_DMP1_MASK (0x1) +#define MEI_DEBUG_DEC_DMP2_MASK (0x2) +#define MEI_DEBUG_DEC_CORE_MASK (0x3) + +#define AUX_STATUS (0x0) +// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate +// page swap requests. +#define MEI_TO_ARC_MAILBOX (0xDFD0) +#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C) + +#define ARC_TO_MEI_MAILBOX (0xDFA0) +#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C) + +// Codeswap request messages are indicated by setting BIT31 +#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) + +// Clear Eoc messages received are indicated by setting BIT17 +#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000) + +/* +** Swap page header +*/ +// Page must be loaded at boot time if size field has BIT31 set +#define BOOT_FLAG (BIT31) +#define BOOT_FLAG_MASK ~BOOT_FLAG + +#define FREE_RELOAD 1 +#define FREE_SHOWTIME 2 +#define FREE_ALL 3 + +// marcos +#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0) +#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) +#define SET_BIT(reg, mask) reg |= (mask) +#define CLEAR_BIT(reg, mask) reg &= (~mask) +#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) +#define SET_BITS(reg, mask) SET_BIT(reg, mask) +#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} + +#define ALIGN_SIZE ( 1L<<10 ) //1K size align +#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) ) + +// swap marco +#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);} +#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);} + +// Swap page header describes size in 32-bit words, load location, and image offset +// for program and/or data segments +typedef struct _arc_swp_page_hdr { + u32 p_offset; //Offset bytes of progseg from beginning of image + u32 p_dest; //Destination addr of progseg on processor + u32 p_size; //Size in 32-bitwords of program segment + u32 d_offset; //Offset bytes of dataseg from beginning of image + u32 d_dest; //Destination addr of dataseg on processor + u32 d_size; //Size in 32-bitwords of data segment +} ARC_SWP_PAGE_HDR; + +/* +** Swap image header +*/ +#define GET_PROG 0 // Flag used for program mem segment +#define GET_DATA 1 // Flag used for data mem segment + +// Image header contains size of image, checksum for image, and count of +// page headers. Following that are 'count' page headers followed by +// the code and/or data segments to be loaded +typedef struct _arc_img_hdr { + u32 size; // Size of binary image in bytes + u32 checksum; // Checksum for image + u32 count; // Count of swp pages in image + ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy +} ARC_IMG_HDR; + +typedef struct smmu_mem_info { + int type; + unsigned long nCopy; + unsigned long size; + unsigned char *address; + unsigned char *org_address; +} smmu_mem_info_t; + +typedef struct ifxmips_mei_device_private { + int modem_ready; + int arcmsgav; + int cmv_reply; + int cmv_waiting; + // Mei to ARC CMV count, reply count, ARC Indicator count + int indicator_count; + int cmv_count; + int reply_count; + unsigned long image_size; + int nBar; + u16 Recent_indicator[MSG_LENGTH]; + + u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4))); + + smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS]; + ARC_IMG_HDR *img_hdr; + // to wait for arc cmv reply, sleep on wait_queue_arcmsgav; + wait_queue_head_t wait_queue_arcmsgav; + wait_queue_head_t wait_queue_modemready; + MEI_mutex_t mei_cmv_sema; +} ifxmips_mei_device_private_t; + +#endif //_IFXMIPS_MEI_BSP_H_ diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_ioctl.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_ioctl.h new file mode 100644 index 0000000000..d11f04ea97 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_ioctl.h @@ -0,0 +1,734 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_ioctl.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_IOCTL_H +#define _IFXMIPS_MEI_IOCTL_H + +///////////////////////////////////////////////////////////////////////////////////////////////////// +#define PCM_BUFF_SIZE 1024 //bytes +// interrupt numbers + +#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP)) + +// Number of intervals +#define INTERVAL_NUM 192 //two days +typedef struct ifxmips_mei_mib { + struct list_head list; + struct timeval start_time; //start of current interval + + int AtucPerfLof; + int AtucPerfLos; + int AtucPerfEs; + int AtucPerfInit; + + int AturPerfLof; + int AturPerfLos; + int AturPerfLpr; + int AturPerfEs; + + int AturChanPerfRxBlk; + int AturChanPerfTxBlk; + int AturChanPerfCorrBlk; + int AturChanPerfUncorrBlk; + + //RFC-3440 + int AtucPerfStatFastR; + int AtucPerfStatFailedFastR; + int AtucPerfStatSesL; + int AtucPerfStatUasL; + int AturPerfStatSesL; + int AturPerfStatUasL; +} ifxmips_mei_mib; + +typedef struct adslChanPrevTxRate { + u32 adslAtucChanPrevTxRate; + u32 adslAturChanPrevTxRate; +} adslChanPrevTxRate; + +typedef struct adslPhysCurrStatus { + u32 adslAtucCurrStatus; + u32 adslAturCurrStatus; +} adslPhysCurrStatus; + +typedef struct ChanType { + int interleave; + int fast; + int bearchannel0; + int bearchannel1; +} ChanType; + +typedef struct mib_previous_read { + u16 ATUC_PERF_ESS; + u16 ATUR_PERF_ESS; + u32 ATUR_CHAN_RECV_BLK; + u16 ATUR_CHAN_CORR_BLK_INTL; + u16 ATUR_CHAN_CORR_BLK_FAST; + u16 ATUR_CHAN_UNCORR_BLK_INTL; + u16 ATUR_CHAN_UNCORR_BLK_FAST; + u16 ATUC_PERF_STAT_FASTR; + u16 ATUC_PERF_STAT_FAILED_FASTR; + u16 ATUC_PERF_STAT_SESL; + u16 ATUC_PERF_STAT_UASL; + u16 ATUR_PERF_STAT_SESL; +} mib_previous_read; + +typedef struct mib_flags_pretime { + struct timeval ATUC_PERF_LOSS_PTIME; + struct timeval ATUC_PERF_LOFS_PTIME; + struct timeval ATUR_PERF_LOSS_PTIME; + struct timeval ATUR_PERF_LOFS_PTIME; + struct timeval ATUR_PERF_LPR_PTIME; +} mib_flags_pretime; + + // cmv message structures +#define MP_PAYLOAD_SIZE 12 +typedef struct mpmessage { + u16 iFunction; + u16 iGroup; + u16 iAddress; + u16 iIndex; + u16 iPayload[MP_PAYLOAD_SIZE]; +} MPMessage; +#endif + +typedef struct meireg { + u32 iAddress; + u32 iData; +} meireg; + +#define MEIDEBUG_BUFFER_SIZES 50 +typedef struct meidebug { + u32 iAddress; + u32 iCount; + u32 buffer[MEIDEBUG_BUFFER_SIZES]; +} meidebug; + +//============================================================================== +// Group definitions +//============================================================================== +#define OPTN 5 +#define CNFG 8 +#define CNTL 1 +#define STAT 2 +#define RATE 6 +#define PLAM 7 +#define INFO 3 +#define TEST 4 +//============================================================================== +// Opcode definitions +//============================================================================== +#define H2D_CMV_READ 0x00 +#define H2D_CMV_WRITE 0x04 +#define H2D_CMV_INDICATE_REPLY 0x10 +#define H2D_ERROR_OPCODE_UNKNOWN 0x20 +#define H2D_ERROR_CMV_UNKNOWN 0x30 + +#define D2H_CMV_READ_REPLY 0x01 +#define D2H_CMV_WRITE_REPLY 0x05 +#define D2H_CMV_INDICATE 0x11 +#define D2H_ERROR_OPCODE_UNKNOWN 0x21 +#define D2H_ERROR_CMV_UNKNOWN 0x31 +#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41 +#define D2H_ERROR_CMV_WRITE_ONLY 0x51 +#define D2H_ERROR_CMV_READ_ONLY 0x61 + +#define H2D_DEBUG_READ_DM 0x02 +#define H2D_DEBUG_READ_PM 0x06 +#define H2D_DEBUG_WRITE_DM 0x0a +#define H2D_DEBUG_WRITE_PM 0x0e + +#define D2H_DEBUG_READ_DM_REPLY 0x03 +#define D2H_DEBUG_READ_FM_REPLY 0x07 +#define D2H_DEBUG_WRITE_DM_REPLY 0x0b +#define D2H_DEBUG_WRITE_FM_REPLY 0x0f +#define D2H_ERROR_ADDR_UNKNOWN 0x33 + +#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1 +//============================================================================== +// INFO register address field definitions +//============================================================================== + +#define INFO_TxState 0 +#define INFO_RxState 1 +#define INFO_TxNextState 2 +#define INFO_RxNextState 3 +#define INFO_TxStateJumpFrom 4 +#define INFO_RxStateJumpFrom 5 + +#define INFO_ReverbSnrBuf 8 +#define INFO_ReverbEchoSnrBuf 9 +#define INFO_MedleySnrBuf 10 +#define INFO_RxShowtimeSnrBuf 11 +#define INFO_DECdelay 12 +#define INFO_DECExponent 13 +#define INFO_DECTaps 14 +#define INFO_AECdelay 15 +#define INFO_AECExponent 16 +#define INFO_AECTaps 17 +#define INFO_TDQExponent 18 +#define INFO_TDQTaps 19 +#define INFO_FDQExponent 20 +#define INFO_FDQTaps 21 +#define INFO_USBat 22 +#define INFO_DSBat 23 +#define INFO_USFineGains 24 +#define INFO_DSFineGains 25 +#define INFO_BitloadFirstChannel 26 +#define INFO_BitloadLastChannel 27 +#define INFO_PollEOCData 28 // CO specific +#define INFO_CSNRMargin 29 // CO specific +#define INFO_RCMsgs1 30 +#define INFO_RMsgs1 31 +#define INFO_RMsgRA 32 +#define INFO_RCMsgRA 33 +#define INFO_RMsg2 34 +#define INFO_RCMsg2 35 +#define INFO_BitLoadOK 36 +#define INFO_RCRates1 37 +#define INFO_RRates1Tab 38 +#define INFO_RMsgs1Tab 39 +#define INFO_RMsgRATab 40 +#define INFO_RRatesRA 41 +#define INFO_RCRatesRA 42 +#define INFO_RRates2 43 +#define INFO_RCRates2 44 +#define INFO_PackedRMsg2 45 +#define INFO_RxBitSwapFlag 46 +#define INFO_TxBitSwapFlag 47 +#define INFO_ShowtimeSNRUpdateCount 48 +#define INFO_ShowtimeFDQUpdateCount 49 +#define INFO_ShowtimeDECUpdateCount 50 +#define INFO_CopyRxBuffer 51 +#define INFO_RxToneBuf 52 +#define INFO_TxToneBuf 53 +#define INFO_Version 54 +#define INFO_TimeStamp 55 +#define INFO_feVendorID 56 +#define INFO_feSerialNum 57 +#define INFO_feVersionNum 58 +#define INFO_BulkMemory 59 //Points to start of bulk memory +#define INFO_neVendorID 60 +#define INFO_neVersionNum 61 +#define INFO_neSerialNum 62 + +//============================================================================== +// RATE register address field definitions +//============================================================================== + +#define RATE_UsRate 0 +#define RATE_DsRate 1 + +//============================================================================== +// PLAM (Physical Layer Management) register address field definitions +// (See G997.1 for reference) +//============================================================================== + + // /// + // Failure Flags /// + // /// + +#define PLAM_NearEndFailureFlags 0 +#define PLAM_FarEndFailureFlags 1 + + // /// + // Near End Failure Flags Bit Definitions /// + // /// + +// ADSL Failures /// +#define PLAM_LOS_FailureBit 0x0001 +#define PLAM_LOF_FailureBit 0x0002 +#define PLAM_LPR_FailureBit 0x0004 +#define PLAM_RFI_FailureBit 0x0008 + +// ATM Failures /// +#define PLAM_NCD_LP0_FailureBit 0x0010 +#define PLAM_NCD_LP1_FailureBit 0x0020 +#define PLAM_LCD_LP0_FailureBit 0x0040 +#define PLAM_LCD_LP1_FailureBit 0x0080 + +#define PLAM_NCD_BC0_FailureBit 0x0100 +#define PLAM_NCD_BC1_FailureBit 0x0200 +#define PLAM_LCD_BC0_FailureBit 0x0400 +#define PLAM_LCD_BC1_FailureBit 0x0800 + // /// + // Performance Counts /// + // /// + +#define PLAM_NearEndCrcCnt 2 +#define PLAM_CorrectedRSErrors 3 + +#define PLAM_NearEndECSCnt 6 +#define PLAM_NearEndESCnt 7 +#define PLAM_NearEndSESCnt 8 +#define PLAM_NearEndLOSSCnt 9 +#define PLAM_NearEndUASLCnt 10 + +#define PLAM_NearEndHECErrCnt 11 + +#define PLAM_NearEndHECTotCnt 16 +#define PLAM_NearEndCellTotCnt 18 +#define PLAM_NearEndSfCntLSW 20 +#define PLAM_NearEndSfCntMSW 21 + +#define PLAM_FarEndFebeCnt 24 + +#define PLAM_FarEndFecCnt 28 + +#define PLAM_FarEndFECSCnt 32 +#define PLAM_FarEndESCnt 33 +#define PLAM_FarEndSESCnt 34 +#define PLAM_FarEndLOSSCnt 35 +#define PLAM_FarEndUASLCnt 36 + +#define PLAM_FarEndHECErrCnt 37 + +#define PLAM_FarEndHECTotCnt 41 + +#define PLAM_FarEndCellTotCnt 43 + +#define PLAM_SNRMargin_0_1db 45 + +#define PLAM_SNRMargin 46 + +//============================================================================== +// CNTL register address and bit field definitions +//============================================================================== + +#define CNTL_ModemControl 0 + +#define CNTL_ModemReset 0x0 +#define CNTL_ModemStart 0x2 + +//============================================================================== +// STAT register address and bit field definitions +//============================================================================== + +#define STAT_MacroState 0 +#define STAT_Mode 1 +#define STAT_DMTFramingMode 2 +#define STAT_SleepState 3 +#define STAT_Misc 4 +#define STAT_FailureState 5 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_OLRStatus provides status of OLR + //16-bit STAT_OLRStatus_DS + // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted + // [3:2]: Reserved + // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) + // [7:6]: Reserved + // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits). + // [11]: 1=Receive Response, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_OLRStatus_DS 6 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_OLRStatus provides status of OLR + // 16-bit STAT_OLRStatus_US CMV + // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted + // [3:2]: Reserved + // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) + // [7:6]: Reserved + // [8]: 1=Request Received. 0=not. + // [10:9]: Reserved + // [11]: 1=Response Sent, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +/// +#define STAT_OLRStatus_US 7 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_PMStatus provides status of PM + // 16-bit STAT_PMStatus CMV + // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted + // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM + // [3]: Reserved + // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim) + // [7:6]: Reserved + // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits). + // [11]: 1=Response, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_PMStatus 8 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError + // [3:0]: OLR/PM response reason code + // [7:4]: OLR/PM Internal error code + // [15:8]: OLR/PM Reserved for future + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_OLRError_DS 9 +#define STAT_OLRError_US 10 +#define STAT_PMError 11 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_MacroState +// MacroState reflects the high level state of the modem + +#define STAT_InitState 0x0000 +#define STAT_ReadyState 0x0001 +#define STAT_FailState 0x0002 +#define STAT_IdleState 0x0003 +#define STAT_QuietState 0x0004 +#define STAT_GhsState 0x0005 +#define STAT_FullInitState 0x0006 +#define STAT_ShowTimeState 0x0007 +#define STAT_FastRetrainState 0x0008 +#define STAT_LoopDiagMode 0x0009 +#define STAT_ShortInit 0x000A // Bis short initialization /// + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_Mode +// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use +// G.Hs or some other mechanism to negotiate the specific mode of operation. +// The OPTN_modeControl CMV is used to select a set of desired modes. +// The STAT_Mode CMV indicates which mode was actually selected. + +#define STAT_ConfigMode_T1413 0x0001 +#define STAT_ConfigMode_G992_2_AB 0x0002 +#define STAT_ConfigMode_G992_1_A 0x0004 +#define STAT_ConfigMode_G992_1_B 0x0008 +#define STAT_ConfigMode_G992_1_C 0x0010 +#define STAT_ConfigMode_G992_2_C 0x0020 + +#define STAT_ConfigMode_G992_3_A 0x0100 +#define STAT_ConfigMode_G992_3_B 0x0200 +#define STAT_ConfigMode_G992_3_I 0x0400 +#define STAT_ConfigMode_G992_3_J 0x0800 +#define STAT_ConfigMode_G992_3_L 0x1000 + +#define STAT_ConfigMode_G992_4_A 0x2000 +#define STAT_ConfigMode_G992_4_I 0x4000 + +#define STAT_ConfigMode_G992_5 0x8000 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_DMTFramingMode +// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode +// status is not applicable in BIS mode and its value is undefined +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_FramingModeMask 0x0003 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_Misc +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_OverlappedSpectrum 0x0008 +#define STAT_TCM 0x0010 +#define STAT_TDQ_at_1104 0x0020 +#define STAT_T1413_Signal_Detected 0x0040 +#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1 +#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_FailureState +// when the MacroSTate indicates the fail state, FailureState provides a failure code +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define E_CODE_NO_ERROR 0 +#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */ +#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */ +#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */ +#define E_CODE_TX_AOC_FIFO_OVERFLOW 4 +#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/ +#define E_CODE_BITLOAD 6 // bit loading fails */ +#define E_CODE_ST_ERROR 7 // showtime CRC error */ +#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */ +#define E_CODE_C_TONES 9 // detected C_TONES */ +#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */ +#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */ +#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */ +#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */ +#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */ +#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */ +#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */ +#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */ +#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */ +#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */ +#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */ +#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */ +#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */ +#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */ +#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */ +#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */ +#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */ +#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */ +#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */ +#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */ +#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */ +#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */ +#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */ +#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */ +#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */ +#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */ +#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */ +#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */ +#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */ +#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */ +#define E_CODE_BAD_MEM_ACCESS 46 +#define E_CODE_BAD_INSTRUCTION_ACCESS 47 +#define E_CODE_TX_EOC_FIFO_OVERFLOW 48 +#define E_CODE_RX_EOC_FIFO_OVERFLOW 49 +#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */ + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//STAT_OLRStatus: +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_OLRPM_IDLE 0x0000 +#define STAT_OLRPM_IN_PROGRESS 0x0001 +#define STAT_OLRPM_COMPLETE 0x0002 +#define STAT_OLRPM_ABORTED 0x0003 +#define STAT_OLRPM_RESPONSE 0x0800 + +#define STAT_OLR_BITSWAP 0x0010 +#define STAT_OLR_DRR 0x0020 +#define STAT_OLR_SRA 0x0030 + +//STAT_PMStatus_US: +#define STAT_PM_CO_REQ 0x0004 +#define STAT_PM_SIMPLE_REQ 0x0010 +#define STAT_PM_L2_REQ 0x0020 +#define STAT_PM_L2_TRIM_REQ 0x0030 + +// STAT_OLRError_DS, STAT_OLRError_US +//4 bit response reason code: +#define RESP_BUSY 0x01 +#define RESP_INVALID_PARAMETERS 0x02 +#define RESP_NOT_ENABLED 0x03 +#define RESP_NOT_SUPPORTED 0x04 + +//4 bit internal error code (common for OLR and PM) +#define REQ_INVALID_BiGi 0x10 +#define REQ_INVALID_Lp 0x20 +#define REQ_INVALID_Bpn 0x30 +#define REQ_INVALID_FRAMING_CONSTRAINT 0x40 +#define REQ_NOT_IN_L0_STATE 0x50 +#define REQ_NOT_IN_L2_STATE 0x60 +#define REQ_INVALID_PCB 0x70 +#define REQ_VIOLATES_MARGIN 0x80 + +//STAT_PMError +//4 bit response reason code: +#define RESP_STATE_NOT_DESIRED 0x03 +#define RESP_INFEASIBLE_PARAMETERS 0x04 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN register address and bit field definitions +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_ModeControl 0 +#define OPTN_DMTLnkCtl 1 +// Reserved 2 +#define OPTN_GhsControl 3 +// Reserved 4 +#define OPTN_PwrManControl 5 +#define OPTN_AnnexControl 6 +#define OPTN_ModeControl1 7 +// Reserved 8 +#define OPTN_StateMachineCtrl 9 +// Reserved 10 +// Reserved 11 +#define OPTN_BisLinkControl 12 +#define OPTN_ATMAddrConfig 13 +#define OPTN_ATMNumCellConfig 14 + +// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may /// +// use G.Hs or some other mechanism to negotiate the specific mode of operation. /// +// The OPTN_ModeControl CMV is used to select a set of desired modes /// +// The STAT_ModeControl CMV indicates which mode was actually selected /// + +// OPTN_ModeControl +#define OPTN_ConfigMode_T1413 0x0001 +#define OPTN_ConfigMode_G992_2_AB 0x0002 +#define OPTN_ConfigMode_G992_1_A 0x0004 +#define OPTN_ConfigMode_G992_1_B 0x0008 +#define OPTN_ConfigMode_G992_1_C 0x0010 +#define OPTN_ConfigMode_G992_2_C 0x0020 + +#define OPTN_ConfigMode_G992_3_A 0x0100 +#define OPTN_ConfigMode_G992_3_B 0x0200 +#define OPTN_ConfigMode_G992_3_I 0x0400 +#define OPTN_ConfigMode_G992_3_J 0x0800 +#define OPTN_ConfigMode_G992_3_L 0x1000 + +#define OPTN_ConfigMode_G992_4_A 0x2000 +#define OPTN_ConfigMode_G992_4_I 0x4000 + +#define OPTN_ConfigMode_G992_5 0x8000 + +// OPTN_PwrManControl +#define OPTN_PwrManWakeUpGhs 0x1 +#define OPTN_PwrManWakeUpFR 0x2 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_DMT Link Control +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#define OPTN_DMT_DualLatency_Dis 0x200 +#define OPTN_DMT_S_Dis 0x100 +#define OPTN_DMT_FRAMINGMODE 0x1 +#define OPTN_DMT_FRAMINGMODE_MASK 0x7 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_BIS Link Control +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#define OPTN_BisLinkContrl_LineProbeDis 0x1 +#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2 +#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4 +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_GhsControl +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// +// for OPTN_GhsControl, we will assign 16bit word as follows +// bit 0~3: set the control over which start(initial) message CPE will send: +// +// BIT: 2 1 0 +// 0 0 1 CLR +// 0 1 0 MR +// 0 1 1 MS +// 1 0 0 MP +// +// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange +// BIT: 5 4 +// 0 1 MS +// 1 0 MR +// 1 1 MP +// +// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default. +// BIT: 15 +// 1 means session one +// +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_GHS_ST_GHS 0x8000 +#define OPTN_GHS_INIT_MASK 0x000F +#define OPTN_GHS_RESP_MASK 0x00F0 + +#define OPTN_RTInitTxMsg_CLR 0x0001 +#define OPTN_RTInitTxMsg_MR 0x0002 +#define OPTN_RTInitTxMsg_MS 0x0003 +#define OPTN_RTInitTxMsg_MP 0x0004 + +#define OPTN_RTRespTxMsg_MS 0x0010 +#define OPTN_RTRespTxMsg_MR 0x0020 +#define OPTN_RTRespTxMsg_MP 0x0030 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_AnnexControl +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +// G.992.3 Annex A/L1/L2 US PSD Mask preferred + +#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000 +#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask /// +#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask /// +#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask /// + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//OPTN_ATMAddrConfig +// Bits 4:0 are Utopia address for BC1 +// Bits 9:5 are Utopia address for BC0 +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_UTPADDR_BC1 0x001F +#define OPTN_UTPADDR_BC0 0x03E0 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//OPTN_ATMNumCellConfig +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 /// +#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 /// + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// CNFG register address field /// +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +/////////////////////////////////////////// +// these cmvs are used by bis handshake /// +/////////////////////////////////////////// + +// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t) +#define CNFG_TPS_TC_DS0 0 +#define CNFG_TPS_TC_DS1 1 +#define CNFG_TPS_TC_US0 2 +#define CNFG_TPS_TC_US1 3 + +#define CNFG_HDLC_Overhead_Requirements 4 + +// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t) +#define CNFG_PMS_TC_DS0 5 +#define CNFG_PMS_TC_DS1 6 +#define CNFG_PMS_TC_US0 7 +#define CNFG_PMS_TC_US1 8 + +// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t) +#define CNFG_PMD_PARAMETERS 9 + +//////////////////////////////////////////////////////////// +// these cmvs are used by bis training and showtime code /// +//////////////////////////////////////////////////////////// + +//////////////// +// Tx Config /// +//////////////// +#define CNFG_tx_Cnfg_Nbc 10 +#define CNFG_tx_Cnfg_Nlp 11 +#define CNFG_tx_Cnfg_Rp 12 +#define CNFG_tx_Cnfg_Mp 13 +#define CNFG_tx_Cnfg_Lp 14 +#define CNFG_tx_Cnfg_Tp 15 +#define CNFG_tx_Cnfg_Dp 16 +#define CNFG_tx_Cnfg_Bpn 17 +#define CNFG_tx_Cnfg_FramingMode 18 +#define CNFG_tx_Cnfg_MSGLp 19 +#define CNFG_tx_Cnfg_MSGc 20 + +//////////////// +// Rx Config /// +//////////////// +#define CNFG_rx_Cnfg_Nbc 21 +#define CNFG_rx_Cnfg_Nlp 22 +#define CNFG_rx_Cnfg_Rp 23 +#define CNFG_rx_Cnfg_Mp 24 +#define CNFG_rx_Cnfg_Lp 25 +#define CNFG_rx_Cnfg_Tp 26 +#define CNFG_rx_Cnfg_Dp 27 +#define CNFG_rx_Cnfg_Bpn 28 +#define CNFG_rx_Cnfg_FramingMode 29 +#define CNFG_rx_Cnfg_MSGLp 30 +#define CNFG_rx_Cnfg_MSGc 31 + +#define CNFG_tx_Cnfg_BCnToLPp 32 +#define CNFG_rx_Cnfg_BCnToLPp 33 + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_linux.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_linux.h new file mode 100644 index 0000000000..79849ae4fb --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_linux.h @@ -0,0 +1,112 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_linux.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef CONFIG_DEVFS_FS //165204:henryhsu devfs will make mei open file fail. + +#ifdef CONFIG_DEVFS_FS +#include +#endif +#ifdef CONFIG_PROC_FS +#include +#endif + +#include +#include +#define __LINUX__ + +#ifdef CONFIG_PROC_FS +#define PROC_ITEMS 8 +#define MEI_DIRNAME "mei" +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_DEVFS_FS +#define IFXMIPS_DEVNAME "ifxmips" +#endif //ifdef CONFIG_DEVFS_FS + +#define MEI_LOCKINT(var) \ + local_save_flags(var);\ + local_irq_disable() +#define MEI_UNLOCKINT(var) \ + local_irq_restore(var) + +#define MEI_MUTEX_INIT(id,flag) \ + sema_init(&id,flag) +#define MEI_MUTEX_LOCK(id) \ + down_interruptible(&id) +#define MEI_MUTEX_UNLOCK(id) \ + up(&id) + +#define MEI_MASK_AND_ACK_IRQ \ + ifxmips_mask_and_ack_irq + +#define MEI_DISABLE_IRQ \ + disable_irq +#define MEI_ENABLE_IRQ \ + enable_irq + +#define MEI_WAIT(ms) \ + {\ + set_current_state(TASK_INTERRUPTIBLE);\ + schedule_timeout(ms);\ + } + +#define MEI_INIT_WAKELIST(name,queue) \ + init_waitqueue_head(&queue) + +#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\ + interruptible_sleep_on_timeout(&ev,timeout) + +#define MEI_WAIT_EVENT(ev)\ + interruptible_sleep_on(&ev) +#define MEI_WAKEUP_EVENT(ev)\ + wake_up_interruptible(&ev) + +typedef unsigned long MEI_intstat_t; +typedef struct semaphore MEI_mutex_t; +typedef struct file MEI_file_t; +typedef struct inode MEI_inode_t; + +extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr); diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_pmu.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_pmu.h new file mode 100644 index 0000000000..dd1f0d6f12 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_pmu.h @@ -0,0 +1,32 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2007 John Crispin + */ +#ifndef _IFXMIPS_PMU_H__ +#define _IFXMIPS_PMU_H__ + + +#define IFXMIPS_PMU_PWDCR_DMA 0x0020 +#define IFXMIPS_PMU_PWDCR_USB 0x8041 +#define IFXMIPS_PMU_PWDCR_LED 0x0800 +#define IFXMIPS_PMU_PWDCR_GPT 0x1000 +#define IFXMIPS_PMU_PWDCR_PPE 0x2000 +#define IFXMIPS_PMU_PWDCR_FPI 0x4000 + +void ifxmips_pmu_enable(unsigned int module); +void ifxmips_pmu_disable(unsigned int module); + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_prom.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_prom.h new file mode 100644 index 0000000000..e640ad7acc --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_prom.h @@ -0,0 +1,26 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2008 John Crispin + */ +#ifndef _IFXPROM_H__ +#define _IFXPROM_H__ + +extern void prom_printf(const char *fmt, ...); +extern u32 *prom_get_cp1_base(void); +extern u32 prom_get_cp1_size(void); +extern int ifxmips_has_brn_block(void); + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/cgu.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/cgu.h new file mode 100644 index 0000000000..9ee287b421 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/cgu.h @@ -0,0 +1,64 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2007 John Crispin + */ + +#ifndef _IFXMIPS_CGU_H__ +#define _IFXMIPS_CGU_H__ + +#define BASIC_INPUT_CLOCK_FREQUENCY_1 35328000 +#define BASIC_INPUT_CLOCK_FREQUENCY_2 36000000 + +#define BASIS_INPUT_CRYSTAL_USB 12000000 + +#define GET_BITS(x, msb, lsb) (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) + +#define CGU_PLL0_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 31)) +#define CGU_PLL0_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 30)) +#define CGU_PLL0_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 28)) +#define CGU_PLL0_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 27)) +#define CGU_PLL1_SRC (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 31)) +#define CGU_PLL1_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 30)) +#define CGU_PLL1_CFG_DSMSEL (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 28)) +#define CGU_PLL1_CFG_FRAC_EN (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 27)) +#define CGU_PLL2_PHASE_DIVIDER_ENABLE (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 20)) +#define CGU_PLL2_BYPASS (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 19)) +#define CGU_SYS_FPI_SEL (1 << 6) +#define CGU_SYS_DDR_SEL 0x3 +#define CGU_PLL0_SRC (1 << 29) + +#define CGU_PLL0_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 26, 17) +#define CGU_PLL0_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 12, 6) +#define CGU_PLL0_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 5, 2) +#define CGU_PLL1_CFG_PLLK GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 26, 17) +#define CGU_PLL1_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 12, 6) +#define CGU_PLL1_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 5, 2) +#define CGU_PLL2_SRC GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 18, 17) +#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 16, 13) +#define CGU_PLL2_CFG_PLLN GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 12, 6) +#define CGU_PLL2_CFG_PLLM GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 5, 2) +#define CGU_IF_CLK_PCI_CLK GET_BITS(*IFXMIPS_CGU_IF_CLK, 23, 20) + + +unsigned int cgu_get_mips_clock(int cpu); +unsigned int cgu_get_io_region_clock(void); +unsigned int cgu_get_fpi_bus_clock(int fpi); +void cgu_setup_pci_clk(int internal_clock); +unsigned int ifxmips_get_ddr_hz(void); +unsigned int ifxmips_get_fpi_hz(void); +unsigned int ifxmips_get_cpu_hz(void); + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/gpio.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/gpio.h new file mode 100644 index 0000000000..fa70ebcac7 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/gpio.h @@ -0,0 +1,105 @@ +/* + * include/asm-mips/mach-ifxmips/gpio.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2007 John Crispin + * + */ + +#ifndef _IFXMIPS_GPIO_H_ +#define _IFXMIPS_GPIO_H_ + +#include +#include + +#define GPIO_TO_PORT(x) ((x > 15) ? (1) : (0)) +#define GPIO_TO_GPIO(x) ((x > 15) ? (x-16) : (x)) + +static inline int gpio_direction_input(unsigned gpio) +{ + ifxmips_port_set_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + ifxmips_port_set_dir_in(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + return 0; +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + ifxmips_port_clear_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + ifxmips_port_set_dir_out(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + return 0; +} + +static inline int gpio_get_value(unsigned gpio) +{ + ifxmips_port_get_input(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + return 0; +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (value) + ifxmips_port_set_output(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); + else + ifxmips_port_clear_output(GPIO_TO_PORT(gpio), + GPIO_TO_GPIO(gpio)); +} + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return 0; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return 0; +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return 0; +} + +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + might_sleep(); + return gpio_get_value(gpio); +} + +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + might_sleep(); + gpio_set_value(gpio, value); +} + +static inline int gpio_is_valid(int number) +{ + return ((unsigned)number) < 16; +} + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/irq.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/irq.h new file mode 100644 index 0000000000..80342ae3a9 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/irq.h @@ -0,0 +1,28 @@ +/* + * include/asm-mips/mach-ifxmips/irq.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2007 John Crispin + * + */ + +#ifndef __IFXMIPS_IRQ_H +#define __IFXMIPS_IRQ_H + +#define NR_IRQS 256 +#include_next + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/war.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/war.h new file mode 100644 index 0000000000..de3584ecf6 --- /dev/null +++ b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/war.h @@ -0,0 +1,24 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#ifndef __ASM_MIPS_MACH_IFXMIPS_WAR_H +#define __ASM_MIPS_MACH_IFXMIPS_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif diff --git a/target/linux/ifxmips/files/arch/mips/pci/pci-ifxmips.c b/target/linux/ifxmips/files/arch/mips/pci/pci-ifxmips.c index d492dada5b..ac81ee3bf4 100644 --- a/target/linux/ifxmips/files/arch/mips/pci/pci-ifxmips.c +++ b/target/linux/ifxmips/files/arch/mips/pci/pci-ifxmips.c @@ -6,7 +6,7 @@ #include #include #include -#include +#include #include #include diff --git a/target/linux/ifxmips/files/drivers/mtd/maps/ifxmips.c b/target/linux/ifxmips/files/drivers/mtd/maps/ifxmips.c index a2d30cd0b6..6498d12cb1 100644 --- a/target/linux/ifxmips/files/drivers/mtd/maps/ifxmips.c +++ b/target/linux/ifxmips/files/drivers/mtd/maps/ifxmips.c @@ -134,8 +134,8 @@ int find_uImage_size(unsigned long start_offset) unsigned long magic; unsigned long temp; ifxmips_copy_from(&ifxmips_map, &magic, start_offset, 4); - if (!(ntohl(magic) == 0x27051956)) { - printk(KERN_INFO "ifxmips_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", ntohl(magic), start_offset); + if (le32_to_cpu(magic) != 0x56190527) { + printk(KERN_INFO "ifxmips_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", le32_to_cpu(magic), start_offset); return 0; } ifxmips_copy_from(&ifxmips_map, &temp, start_offset + 12, 4); @@ -159,7 +159,7 @@ int detect_squashfs_partition(unsigned long start_offset) { unsigned long temp; ifxmips_copy_from(&ifxmips_map, &temp, start_offset, 4); - return temp == SQUASHFS_MAGIC; + return le32_to_cpu(temp) == SQUASHFS_MAGIC; } static int ifxmips_mtd_probe(struct platform_device *dev) diff --git a/target/linux/ifxmips/files/drivers/net/ifxmips_mii0.c b/target/linux/ifxmips/files/drivers/net/ifxmips_mii0.c index 1185a15372..0fddc631ba 100644 --- a/target/linux/ifxmips/files/drivers/net/ifxmips_mii0.c +++ b/target/linux/ifxmips/files/drivers/net/ifxmips_mii0.c @@ -79,7 +79,7 @@ EXPORT_SYMBOL(ifxmips_read_mdio); int ifxmips_ifxmips_mii_open(struct net_device *dev) { - struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv; + struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev); struct dma_device_info *dma_dev = priv->dma_device; int i; @@ -93,7 +93,7 @@ int ifxmips_ifxmips_mii_open(struct net_device *dev) int ifxmips_mii_release(struct net_device *dev) { - struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv; + struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev); struct dma_device_info *dma_dev = priv->dma_device; int i; @@ -105,7 +105,7 @@ int ifxmips_mii_release(struct net_device *dev) int ifxmips_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev) { - struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv; + struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev); unsigned char *buf = NULL; struct sk_buff *skb = NULL; int len = 0; @@ -154,7 +154,7 @@ ifxmips_mii_hw_receive_err_exit: int ifxmips_mii_hw_tx(char *buf, int len, struct net_device *dev) { int ret = 0; - struct ifxmips_mii_priv *priv = dev->priv; + struct ifxmips_mii_priv *priv = netdev_priv(dev); struct dma_device_info *dma_dev = priv->dma_device; ret = dma_device_write(dma_dev, buf, len, priv->skb); return ret; @@ -164,7 +164,7 @@ int ifxmips_mii_tx(struct sk_buff *skb, struct net_device *dev) { int len; char *data; - struct ifxmips_mii_priv *priv = dev->priv; + struct ifxmips_mii_priv *priv = netdev_priv(dev); struct dma_device_info *dma_dev = priv->dma_device; len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; @@ -192,7 +192,7 @@ int ifxmips_mii_tx(struct sk_buff *skb, struct net_device *dev) void ifxmips_mii_tx_timeout(struct net_device *dev) { int i; - struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv; + struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev); priv->stats.tx_errors++; for (i = 0; i < priv->dma_device->max_tx_chan_num; i++) @@ -261,14 +261,13 @@ void ifxmips_etop_dma_buffer_free(unsigned char *dataptr, void *opt) static struct net_device_stats *ifxmips_get_stats(struct net_device *dev) { - return (struct net_device_stats *)dev->priv; + return &((struct ifxmips_mii_priv *)netdev_priv(dev))->stats; } static int ifxmips_mii_dev_init(struct net_device *dev) { int i; - struct ifxmips_mii_priv *priv; - + struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev); ether_setup(dev); printk(KERN_INFO "ifxmips_mii0: %s is up\n", dev->name); dev->open = ifxmips_ifxmips_mii_open; @@ -277,8 +276,7 @@ static int ifxmips_mii_dev_init(struct net_device *dev) dev->get_stats = ifxmips_get_stats; dev->tx_timeout = ifxmips_mii_tx_timeout; dev->watchdog_timeo = 10 * HZ; - memset(dev->priv, 0, sizeof(struct ifxmips_mii_priv)); - priv = dev->priv; + memset(priv, 0, sizeof(struct ifxmips_mii_priv)); priv->dma_device = dma_device_reserve("PPE"); if (!priv->dma_device) { BUG(); @@ -347,14 +345,13 @@ out: static int ifxmips_mii_remove(struct platform_device *dev) { - struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)ifxmips_mii0_dev->priv; + struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(ifxmips_mii0_dev); printk(KERN_INFO "ifxmips_mii0: ifxmips_mii0 cleanup\n"); dma_device_unregister(priv->dma_device); dma_device_release(priv->dma_device); kfree(priv->dma_device); - kfree(ifxmips_mii0_dev->priv); unregister_netdev(ifxmips_mii0_dev); return 0; } diff --git a/target/linux/ifxmips/files/drivers/watchdog/ifxmips_wdt.c b/target/linux/ifxmips/files/drivers/watchdog/ifxmips_wdt.c index e62d2fec38..d75eeeac20 100644 --- a/target/linux/ifxmips/files/drivers/watchdog/ifxmips_wdt.c +++ b/target/linux/ifxmips/files/drivers/watchdog/ifxmips_wdt.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #define IFXMIPS_WDT_PW1 0x00BE0000 diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_peripheral_definitions.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_peripheral_definitions.h deleted file mode 100644 index 5bd788fff6..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_peripheral_definitions.h +++ /dev/null @@ -1,119 +0,0 @@ -//************************************************************************* -//* Summary of definitions which are used in each peripheral * -//************************************************************************* - -#ifndef peripheral_definitions_h -#define peripheral_definitions_h - -////#include "cpu.h" -// -///* These files have to be included by each peripheral */ -//#include -//#include -//#include -//#include -//#include -//#include "SRAM_address_map.h" -// -///* common header files for all CPU's */ -//#include "iiu.h" -//#include "bcu.h" -//#include "FPI_address_map.h" -//#include "direct_interrupts.h" - -///////////////////////////////////////////////////////////////////////// - -//extern int _clz(); -//extern void _nop(); -//extern void _sleep(); -//extern void sys_enable_int(); - -typedef unsigned char UINT8; -typedef signed char INT8; -typedef unsigned short UINT16; -typedef signed short INT16; -typedef unsigned int UINT32; -typedef signed int INT32; -typedef unsigned long long UINT64; -typedef signed long long INT64; - -#define REG8( addr ) (*(volatile UINT8 *) (addr)) -#define REG16( addr ) (*(volatile UINT16 *)(addr)) -#define REG32( addr ) (*(volatile UINT32 *)(addr)) -#define REG64( addr ) (*(volatile UINT64 *)(addr)) - -/* define routine to set FPI access in Supervisor Mode */ -#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG) -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm -/* enable all Interrupts in IIU */ -//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask -///* get all high priority interrupt bits in IIU */ -//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED) -///* signal ends of interrupt to IIU */ -//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit -///* force IIU interrupt register */ -//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data -///* get all bits of interrupt register */ -//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR) -/* insert a NOP instruction */ -#define NOP _nop() -/* CPU goes to power down mode until interrupt occurs */ -#define IFX_CPU_SLEEP _sleep() -/* enable all interrupts to CPU */ -#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int() -/* get all low priority interrupt bits in peripheral */ -#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg) -/* clear low priority interrupt bit in peripheral */ -#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit -/* write FPI bus */ -#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data -#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data -#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data -/* read FPI bus */ -#define READ_FPI_BYTE(addr) REG8(addr) -#define READ_FPI_16BIT(addr) REG16(addr) -#define READ_FPI_32BIT(addr) REG32(addr) -/* write peripheral register */ -#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data -#else //not CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data -#endif //CONFIG_CPU_LITTLE_ENDIAN - -/* read peripheral register */ -#define READ_PERIPHERAL_REGISTER(addr) REG32(addr) - -/* read/modify(or)/write peripheral register */ -#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data -/* read/modify(and)/write peripheral register */ -#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data - -/* CPU-independent mnemonic constants */ -/* CLC register bits */ -#define IFX_CLC_ENABLE 0x00000000 -#define IFX_CLC_DISABLE 0x00000001 -#define IFX_CLC_DISABLE_STATUS 0x00000002 -#define IFX_CLC_SUSPEND_ENABLE 0x00000004 -#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008 -#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010 -#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020 -#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00 -#define IFX_CLC_RUN_DIVIDER_OFFSET 8 -#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16 -#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24 - -/* number of cycles to wait for interrupt service routine to be called */ -#define WAIT_CYCLES 50 - -#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */ diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc.h deleted file mode 100644 index c6dd5d47a9..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * ifx_ssc.h defines some data sructures used in ifx_ssc.c - * - * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT) - * - * - */ - -#ifndef __IFX_SSC_H -#define __IFX_SSC_H -#ifdef __KERNEL__ -#include -#endif //__KERNEL__ - -#define PORT_CNT 1 // assume default value - -/* symbolic constants to be used in SSC routines */ - -// ### TO DO: bad performance -#define IFX_SSC_TXFIFO_ITL 1 -#define IFX_SSC_RXFIFO_ITL 1 - -struct ifx_ssc_statistics { - unsigned int abortErr; /* abort error */ - unsigned int modeErr; /* master/slave mode error */ - unsigned int txOvErr; /* TX Overflow error */ - unsigned int txUnErr; /* TX Underrun error */ - unsigned int rxOvErr; /* RX Overflow error */ - unsigned int rxUnErr; /* RX Underrun error */ - unsigned int rxBytes; - unsigned int txBytes; -}; - -struct ifx_ssc_hwopts { - unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */ - unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */ - unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */ - unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */ - unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */ - unsigned int echoMode:1; /* Echo mode */ - unsigned int loopBack:1; /* Loopback mode */ - unsigned int idleValue:1; /* Idle value */ - unsigned int clockPolarity:1; /* Idle clock is high or low */ - unsigned int clockPhase:1; /* Tx on trailing or leading edge */ - unsigned int headingControl:1; /* LSB first or MSB first */ - unsigned int dataWidth:6; /* from 2 up to 32 bits */ - unsigned int masterSelect:1; /* Master or Slave mode */ - unsigned int modeRxTx:2; /* rx/tx mode */ - unsigned int gpoCs:8; /* choose outputs to use for chip select */ - unsigned int gpoInv:8; /* invert GPO outputs */ -}; - -struct ifx_ssc_frm_opts { - bool FrameEnable; // SFCON.SFEN - unsigned int DataLength; // SFCON.DLEN - unsigned int PauseLength; // SFCON.PLEN - unsigned int IdleData; // SFCON.IDAT - unsigned int IdleClock; // SFCON.ICLK - bool StopAfterPause; // SFCON.STOP -}; - -struct ifx_ssc_frm_status { - bool DataBusy; // SFSTAT.DBSY - bool PauseBusy; // SFSTAT.PBSY - unsigned int DataCount; // SFSTAT.DCNT - unsigned int PauseCount; // SFSTAT.PCNT - bool EnIntAfterData; // SFCON.IBEN - bool EnIntAfterPause; // SFCON.IAEN -}; - -typedef struct { - char *buf; - size_t len; -} ifx_ssc_buf_item_t; - -// data structures for batch execution -typedef union { - struct { - bool save_options; - } init; - ifx_ssc_buf_item_t read; - ifx_ssc_buf_item_t write; - ifx_ssc_buf_item_t rd_wr; - unsigned int set_baudrate; - struct ifx_ssc_frm_opts set_frm; - unsigned int set_gpo; - struct ifx_ssc_hwopts set_hwopts; -} ifx_ssc_batch_cmd_param; - -struct ifx_ssc_batch_list { - unsigned int cmd; - ifx_ssc_batch_cmd_param cmd_param; - struct ifx_ssc_batch_list *next; -}; - -#ifdef __KERNEL__ -#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE) - -struct ifx_ssc_port { - unsigned long mapbase; - struct ifx_ssc_hwopts opts; - struct ifx_ssc_statistics stats; - struct ifx_ssc_frm_status frm_status; - struct ifx_ssc_frm_opts frm_opts; - /* wait queue for ifx_ssc_read() */ - wait_queue_head_t rwait, pwait; - int port_nr; - char port_is_open; /* exclusive open - boolean */ -// int no_of_bits; /* number of _valid_ bits */ -// int elem_size; /* shift for element (no of bytes)*/ - /* buffer and pointers to the read/write position */ - char *rxbuf; /* buffer for RX */ - char *rxbuf_end; /* buffer end pointer for RX */ - volatile char *rxbuf_ptr; /* buffer write pointer for RX */ - char *txbuf; /* buffer for TX */ - char *txbuf_end; /* buffer end pointer for TX */ - volatile char *txbuf_ptr; /* buffer read pointer for TX */ - unsigned int baud; - /* each channel has its own interrupts */ - /* (transmit/receive/error/frame) */ - unsigned int txirq, rxirq, errirq, frmirq; -}; -/* default values for SSC configuration */ -// values of CON -#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */ -#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */ -#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */ -#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */ -#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */ -#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */ -#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */ -#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */ -#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST -#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX -// other values -#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */ -#ifdef CONFIG_USE_EMULATOR -#define IFX_SSC_DEF_BAUDRATE 10000 -#else -#define IFX_SSC_DEF_BAUDRATE 2000000 -#endif -#define IFX_SSC_DEF_RMC 0x10 - -#define IFX_SSC_DEF_TXFIFO_FL 8 -#define IFX_SSC_DEF_RXFIFO_FL 1 - -#if 1 //TODO -#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */ -#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */ -#else -#error "what is ur Chip Select???" -#endif -#define IFX_SSC_DEF_SFCON 0 /* no serial framing */ -#if 0 -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT -#endif -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT -#endif /* __KERNEL__ */ - -// batch execution commands -#define IFX_SSC_BATCH_CMD_INIT 1 -#define IFX_SSC_BATCH_CMD_READ 2 -#define IFX_SSC_BATCH_CMD_WRITE 3 -#define IFX_SSC_BATCH_CMD_RD_WR 4 -#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5 -#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6 -#define IFX_SSC_BATCH_CMD_SET_FRM 7 -#define IFX_SSC_BATCH_CMD_SET_GPO 8 -#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9 -//#define IFX_SSC_BATCH_CMD_ -//#define IFX_SSC_BATCH_CMD_ -#define IFX_SSC_BATCH_CMD_END_EXEC 0 - -/* Macros to configure SSC hardware */ -/* headingControl: */ -#define IFX_SSC_LSB_FIRST 0 -#define IFX_SSC_MSB_FIRST 1 -/* dataWidth: */ -#define IFX_SSC_MIN_DATA_WIDTH 2 -#define IFX_SSC_MAX_DATA_WIDTH 32 -/* master/slave mode select */ -#define IFX_SSC_MASTER_MODE 1 -#define IFX_SSC_SLAVE_MODE 0 -/* rx/tx mode */ -// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h -#define IFX_SSC_MODE_RXTX 0 -#define IFX_SSC_MODE_RX 1 -#define IFX_SSC_MODE_TX 2 -#define IFX_SSC_MODE_OFF 3 -#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX - -/* GPO values */ -#define IFX_SSC_MAX_GPO_OUT 7 - -#define IFX_SSC_RXREQ_BLOCK_SIZE 32768 - -/***********************/ -/* defines for ioctl's */ -/***********************/ -#define IFX_SSC_IOCTL_MAGIC 'S' -/* read out the statistics */ -#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics) -/* clear the statistics */ -#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2) -/* set the baudrate */ -#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int) -/* get the current baudrate */ -#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int) -/* set hardware options */ -#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts) -/* get the current hardware options */ -#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts) -/* set transmission mode */ -#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int) -/* get the current transmission mode */ -#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int) -/* abort transmission */ -#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9) -#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9) - -/* set general purpose outputs */ -#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int) -/* clear general purpose outputs */ -#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int) -/* get general purpose outputs */ -#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int) - -/*** serial framing ***/ -/* get status of serial framing */ -#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status) -/* get counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts) -/* set counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts) - -/*** batch execution ***/ -/* do batch execution */ -#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list) - -#ifdef __KERNEL__ -// routines from ifx_ssc.c -// ### TO DO -/* kernel interface for read and write */ -ssize_t ifx_ssc_kread (int, char *, size_t); -ssize_t ifx_ssc_kwrite (int, const char *, size_t); - -#ifdef CONFIG_IFX_VP_KERNEL_TEST -void ifx_ssc_tc (void); -#endif // CONFIG_IFX_VP_KERNEL_TEST - -#endif //__KERNEL__ -#endif // __IFX_SSC_H diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc_defines.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc_defines.h deleted file mode 100644 index 805d48ad84..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc_defines.h +++ /dev/null @@ -1,547 +0,0 @@ -#ifndef IFX_SSC_DEFINES_H -#define IFX_SSC_DEFINES_H - -#include "ifx_peripheral_definitions.h" - -/* maximum SSC FIFO size */ -#define IFX_SSC_MAX_FIFO_SIZE 32 - -/* register map of SSC */ - -/* address of the Clock Control Register of the SSC */ -#define IFX_SSC_CLC 0x00000000 -/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0 - bit 1 is hardware modified*/ -#define IFX_SSC_CLC_readmask 0x00FFFFEF -#define IFX_SSC_CLC_writemask 0x00FFFF3D -#define IFX_SSC_CLC_hwmask 0x00000002 -#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask) - -/* address of Port Input Select Register of the SSC */ -#define IFX_SSC_PISEL 0x00000004 -/* IFX_SSC_PISEL register is significant in lowest three bits only */ -#define IFX_SSC_PISEL_readmask 0x00000007 -#define IFX_SSC_PISEL_writemask 0x00000007 -#define IFX_SSC_PISEL_hwmask 0x00000000 -#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask) - -/* address of Identification Register of the SSC */ -#define IFX_SSC_ID 0x00000008 -/* IFX_SSC_ID register is significant in no bit */ -#define IFX_SSC_ID_readmask 0x0000FF3F -#define IFX_SSC_ID_writemask 0x00000000 -#define IFX_SSC_ID_hwmask 0x00000000 -#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask) - -/* address of the Control Register of the SSC */ -#define IFX_SSC_CON 0x00000010 -/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */ -#define IFX_SSC_CON_readmask 0x01DF1FFF -#define IFX_SSC_CON_writemask 0x01DF1FFF -#define IFX_SSC_CON_hwmask 0x00000000 -#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask) - -/* address of the Status Register of the SSC */ -#define IFX_SSC_STATE 0x00000014 -/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0 - all bits except 1:0 are hardware modified */ -#define IFX_SSC_STATE_readmask 0x771F3F87 -#define IFX_SSC_STATE_writemask 0x00000000 -#define IFX_SSC_STATE_hwmask 0x771F3F84 -#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask) - -/* address of the Write Hardware Modified Control Register Bits of the SSC */ -#define IFX_SSC_WHBSTATE 0x00000018 -/* IFX_SSC_WHBSTATE register is write only */ -#define IFX_SSC_WHBSTATE_readmask 0x00000000 -#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF -#define IFX_SSC_WHBSTATE_hwmask 0x00000000 -#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask) - -/* address of the Baudrate Timer Reload Register of the SSC */ -#define IFX_SSC_BR 0x00000040 -/* IFX_SSC_BR register is significant in bit 15 downto 0*/ -#define IFX_SSC_BR_readmask 0x0000FFFF -#define IFX_SSC_BR_writemask 0x0000FFFF -#define IFX_SSC_BR_hwmask 0x00000000 -#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask) - -/* address of the Baudrate Timer Status Register of the SSC */ -#define IFX_SSC_BRSTAT 0x00000044 -/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/ -#define IFX_SSC_BRSTAT_readmask 0x0000FFFF -#define IFX_SSC_BRSTAT_writemask 0x00000000 -#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF -#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask) - -/* address of the Transmitter Buffer Register of the SSC */ -#define IFX_SSC_TB 0x00000020 -/* IFX_SSC_TB register is significant in bit 31 downto 0*/ -#define IFX_SSC_TB_readmask 0xFFFFFFFF -#define IFX_SSC_TB_writemask 0xFFFFFFFF -#define IFX_SSC_TB_hwmask 0x00000000 -#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask) - -/* address of the Reciver Buffer Register of the SSC */ -#define IFX_SSC_RB 0x00000024 -/* IFX_SSC_RB register is significant in no bits*/ -#define IFX_SSC_RB_readmask 0xFFFFFFFF -#define IFX_SSC_RB_writemask 0x00000000 -#define IFX_SSC_RB_hwmask 0xFFFFFFFF -#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask) - -/* address of the Receive FIFO Control Register of the SSC */ -#define IFX_SSC_RXFCON 0x00000030 -/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_RXFCON_readmask 0x00003F03 -#define IFX_SSC_RXFCON_writemask 0x00003F03 -#define IFX_SSC_RXFCON_hwmask 0x00000000 -#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask) - -/* address of the Transmit FIFO Control Register of the SSC */ -#define IFX_SSC_TXFCON 0x00000034 -/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_TXFCON_readmask 0x00003F03 -#define IFX_SSC_TXFCON_writemask 0x00003F03 -#define IFX_SSC_TXFCON_hwmask 0x00000000 -#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask) - -/* address of the FIFO Status Register of the SSC */ -#define IFX_SSC_FSTAT 0x00000038 -/* IFX_SSC_FSTAT register is significant in no bit*/ -#define IFX_SSC_FSTAT_readmask 0x00003F3F -#define IFX_SSC_FSTAT_writemask 0x00000000 -#define IFX_SSC_FSTAT_hwmask 0x00003F3F -#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask) - -/* address of the Data Frame Control register of the SSC */ -#define IFX_SSC_SFCON 0x00000060 -#define IFX_SSC_SFCON_readmask 0xFFDFFFFD -#define IFX_SSC_SFCON_writemask 0xFFDFFFFD -#define IFX_SSC_SFCON_hwmask 0x00000000 -#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask) - -/* address of the Data Frame Status register of the SSC */ -#define IFX_SSC_SFSTAT 0x00000064 -#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_writemask 0x00000000 -#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask) - -/* address of the General Purpose Output Control register of the SSC */ -#define IFX_SSC_GPOCON 0x00000070 -#define IFX_SSC_GPOCON_readmask 0x0000FFFF -#define IFX_SSC_GPOCON_writemask 0x0000FFFF -#define IFX_SSC_GPOCON_hwmask 0x00000000 -#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask) - -/* address of the General Purpose Output Status register of the SSC */ -#define IFX_SSC_GPOSTAT 0x00000074 -#define IFX_SSC_GPOSTAT_readmask 0x000000FF -#define IFX_SSC_GPOSTAT_writemask 0x00000000 -#define IFX_SSC_GPOSTAT_hwmask 0x00000000 -#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask) - -/* address of the Force GPO Status register of the SSC */ -#define IFX_SSC_WHBGPOSTAT 0x00000078 -#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF -#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask) - -/* address of the Receive Request Register of the SSC */ -#define IFX_SSC_RXREQ 0x00000080 -#define IFX_SSC_RXREQ_readmask 0x0000FFFF -#define IFX_SSC_RXREQ_writemask 0x0000FFFF -#define IFX_SSC_RXREQ_hwmask 0x00000000 -#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask) - -/* address of the Receive Count Register of the SSC */ -#define IFX_SSC_RXCNT 0x00000084 -#define IFX_SSC_RXCNT_readmask 0x0000FFFF -#define IFX_SSC_RXCNT_writemask 0x00000000 -#define IFX_SSC_RXCNT_hwmask 0x0000FFFF -#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask) - -/* address of the DMA Configuration Register of the SSC */ -#define IFX_SSC_DMACON 0x000000EC -#define IFX_SSC_DMACON_readmask 0x0000FFFF -#define IFX_SSC_DMACON_writemask 0x00000000 -#define IFX_SSC_DMACON_hwmask 0x0000FFFF -#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask) - -//------------------------------------------------------ -// interrupt register for enabling interrupts, mask register of irq_reg -#define IFX_SSC_IRN_EN 0xF4 -// read/write -#define IFX_SSC_IRN_EN_readmask 0x0000000F -#define IFX_SSC_IRN_EN_writemask 0x0000000F -#define IFX_SSC_IRN_EN_hwmask 0x00000000 -#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask) - -// interrupt register for accessing interrupts -#define IFX_SSC_IRN_CR 0xF8 -// read/write -#define IFX_SSC_IRN_CR_readmask 0x0000000F -#define IFX_SSC_IRN_CR_writemask 0x0000000F -#define IFX_SSC_IRN_CR_hwmask 0x0000000F -#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask) - -// interrupt register for stimulating interrupts -#define IFX_SSC_IRN_ICR 0xFC -// read/write -#define IFX_SSC_IRN_ICR_readmask 0x0000000F -#define IFX_SSC_IRN_ICR_writemask 0x0000000F -#define IFX_SSC_IRN_ICR_hwmask 0x00000000 -#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask) - -//--------------------------------------------------------------------- -// Number of IRQs and bitposition of IRQ -#define IFX_SSC_NUM_IRQ 4 -#define IFX_SSC_T_BIT 0x00000001 -#define IFX_SSC_R_BIT 0x00000002 -#define IFX_SSC_E_BIT 0x00000004 -#define IFX_SSC_F_BIT 0x00000008 - -/* bit masks for SSC registers */ - -/* ID register */ -#define IFX_SSC_PERID_REV_MASK 0x0000001F -#define IFX_SSC_PERID_CFG_MASK 0x00000020 -#define IFX_SSC_PERID_ID_MASK 0x0000FF00 -#define IFX_SSC_PERID_REV_OFFSET 0 -#define IFX_SSC_PERID_CFG_OFFSET 5 -#define IFX_SSC_PERID_ID_OFFSET 8 -#define IFX_SSC_PERID_ID 0x45 -#define IFX_SSC_PERID_DMA_ON 0x00000020 -#define IFX_SSC_PERID_RXFS_MASK 0x003F0000 -#define IFX_SSC_PERID_RXFS_OFFSET 16 -#define IFX_SSC_PERID_TXFS_MASK 0x3F000000 -#define IFX_SSC_PERID_TXFS_OFFSET 24 - -/* PISEL register */ -#define IFX_SSC_PISEL_MASTER_IN_A 0x0000 -#define IFX_SSC_PISEL_MASTER_IN_B 0x0001 -#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000 -#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002 -#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000 -#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004 - -/* IFX_SSC_CON register */ -#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000 -#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000 -#define IFX_SSC_CON_IDLE_HIGH 0x00800000 -#define IFX_SSC_CON_IDLE_LOW 0x00000000 -#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000 -#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000 -#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16 -#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000 -#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK) - -#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000 -#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000 - -#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000 -#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800 -#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400 -#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000 -#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200 -#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100 -#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00 -#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000 - -#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080 -#define IFX_SSC_CON_NO_LOOPBACK 0x00000000 -#define IFX_SSC_CON_HALF_DUPLEX 0x00000080 -#define IFX_SSC_CON_FULL_DUPLEX 0x00000000 -#define IFX_SSC_CON_CLOCK_FALL 0x00000040 -#define IFX_SSC_CON_CLOCK_RISE 0x00000000 -#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000 -#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020 -#define IFX_SSC_CON_MSB_FIRST 0x00000010 -#define IFX_SSC_CON_LSB_FIRST 0x00000000 -#define IFX_SSC_CON_ENABLE_CSB 0x00000008 -#define IFX_SSC_CON_DISABLE_CSB 0x00000000 -#define IFX_SSC_CON_INVERT_CSB 0x00000004 -#define IFX_SSC_CON_TRUE_CSB 0x00000000 -#define IFX_SSC_CON_RX_OFF 0x00000002 -#define IFX_SSC_CON_RX_ON 0x00000000 -#define IFX_SSC_CON_TX_OFF 0x00000001 -#define IFX_SSC_CON_TX_ON 0x00000000 - -/* IFX_SSC_STATE register */ -#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28 -#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000 -#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24 -#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000 -#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16 -#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000 -#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1) -#define IFX_SSC_STATE_BUSY 0x00002000 -#define IFX_SSC_STATE_RX_UFL 0x00001000 -#define IFX_SSC_STATE_TX_UFL 0x00000800 -#define IFX_SSC_STATE_ABORT_ERR 0x00000400 -#define IFX_SSC_STATE_RX_OFL 0x00000200 -#define IFX_SSC_STATE_TX_OFL 0x00000100 -#define IFX_SSC_STATE_MODE_ERR 0x00000080 -#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004 -#define IFX_SSC_STATE_IS_MASTER 0x00000002 -#define IFX_SSC_STATE_IS_ENABLED 0x00000001 - -/* WHBSTATE register */ -#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001 -#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001 -#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001 - -#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002 -#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002 -#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002 - -#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004 -#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004 - -#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008 -#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008 - -#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010 -#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020 - -#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040 -#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080 - -#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100 -#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200 -#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400 -#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800 -#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000 -#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000 -#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000 -#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000 -#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50 -#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0 - -/* BR register */ -#define IFX_SSC_BR_BAUDRATE_OFFSET 0 -#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF - -/* BR_STAT register */ -#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0 -#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF - -/* TB register */ -#define IFX_SSC_TB_DATA_OFFSET 0 -#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF - -/* RB register */ -#define IFX_SSC_RB_DATA_OFFSET 0 -#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF - -/* RXFCON and TXFCON registers */ -#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000 -#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001 -#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002 -#define IFX_SSC_XFCON_ITL_MASK 0x00003F00 -#define IFX_SSC_XFCON_ITL_OFFSET 8 - -/* FSTAT register */ -#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0 -#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8 -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00 - -/* GPOCON register */ -#define IFX_SSC_GPOCON_INVOUT0_POS 0 -#define IFX_SSC_GPOCON_INV_OUT0 0x00000001 -#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000 -#define IFX_SSC_GPOCON_INVOUT1_POS 1 -#define IFX_SSC_GPOCON_INV_OUT1 0x00000002 -#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000 -#define IFX_SSC_GPOCON_INVOUT2_POS 2 -#define IFX_SSC_GPOCON_INV_OUT2 0x00000003 -#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000 -#define IFX_SSC_GPOCON_INVOUT3_POS 3 -#define IFX_SSC_GPOCON_INV_OUT3 0x00000008 -#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000 -#define IFX_SSC_GPOCON_INVOUT4_POS 4 -#define IFX_SSC_GPOCON_INV_OUT4 0x00000010 -#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000 -#define IFX_SSC_GPOCON_INVOUT5_POS 5 -#define IFX_SSC_GPOCON_INV_OUT5 0x00000020 -#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000 -#define IFX_SSC_GPOCON_INVOUT6_POS 6 -#define IFX_SSC_GPOCON_INV_OUT6 0x00000040 -#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000 -#define IFX_SSC_GPOCON_INVOUT7_POS 7 -#define IFX_SSC_GPOCON_INV_OUT7 0x00000080 -#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000 -#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF -#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000 - -#define IFX_SSC_GPOCON_ISCSB0_POS 8 -#define IFX_SSC_GPOCON_IS_CSB0 0x00000100 -#define IFX_SSC_GPOCON_IS_GPO0 0x00000000 -#define IFX_SSC_GPOCON_ISCSB1_POS 9 -#define IFX_SSC_GPOCON_IS_CSB1 0x00000200 -#define IFX_SSC_GPOCON_IS_GPO1 0x00000000 -#define IFX_SSC_GPOCON_ISCSB2_POS 10 -#define IFX_SSC_GPOCON_IS_CSB2 0x00000400 -#define IFX_SSC_GPOCON_IS_GPO2 0x00000000 -#define IFX_SSC_GPOCON_ISCSB3_POS 11 -#define IFX_SSC_GPOCON_IS_CSB3 0x00000800 -#define IFX_SSC_GPOCON_IS_GPO3 0x00000000 -#define IFX_SSC_GPOCON_ISCSB4_POS 12 -#define IFX_SSC_GPOCON_IS_CSB4 0x00001000 -#define IFX_SSC_GPOCON_IS_GPO4 0x00000000 -#define IFX_SSC_GPOCON_ISCSB5_POS 13 -#define IFX_SSC_GPOCON_IS_CSB5 0x00002000 -#define IFX_SSC_GPOCON_IS_GPO5 0x00000000 -#define IFX_SSC_GPOCON_ISCSB6_POS 14 -#define IFX_SSC_GPOCON_IS_CSB6 0x00004000 -#define IFX_SSC_GPOCON_IS_GPO6 0x00000000 -#define IFX_SSC_GPOCON_ISCSB7_POS 15 -#define IFX_SSC_GPOCON_IS_CSB7 0x00008000 -#define IFX_SSC_GPOCON_IS_GPO7 0x00000000 -#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00 -#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000 - -/* GPOSTAT register */ -#define IFX_SSC_GPOSTAT_OUT0 0x00000001 -#define IFX_SSC_GPOSTAT_OUT1 0x00000002 -#define IFX_SSC_GPOSTAT_OUT2 0x00000004 -#define IFX_SSC_GPOSTAT_OUT3 0x00000008 -#define IFX_SSC_GPOSTAT_OUT4 0x00000010 -#define IFX_SSC_GPOSTAT_OUT5 0x00000020 -#define IFX_SSC_GPOSTAT_OUT6 0x00000040 -#define IFX_SSC_GPOSTAT_OUT7 0x00000080 -#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF - -/* WHBGPOSTAT register */ -#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001 -#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002 -#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004 -#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008 -#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010 -#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020 -#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040 -#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF - -#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7 - -#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8 -#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100 -#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9 -#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200 -#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10 -#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400 -#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11 -#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800 -#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12 -#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000 -#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13 -#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000 -#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14 -#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000 -#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15 -#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000 -#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00 - -/* SFCON register */ -#define IFX_SSC_SFCON_SF_ENABLE 0x00000001 -#define IFX_SSC_SFCON_SF_DISABLE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004 -#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008 -#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0 -#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4 -#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000 -#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16 -#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000 -#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18 -#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000 -#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000 -#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22 -#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024 - -#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET) -#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) -#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK) -#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) - -/* SFSTAT register */ -#define IFX_SSC_SFSTAT_IN_DATA 0x00000001 -#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002 -#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0 -#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20 - -#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET) -#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET) - -/* RXREQ register */ -#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF -#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0 - -/* RXCNT register */ -#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF -#define IFX_SSC_RXCNT_TODO_OFFSET 0 - -/* DMACON register */ -#define IFX_SSC_DMACON_RXON 0x00000001 -#define IFX_SSC_DMACON_RXOFF 0x00000000 -#define IFX_SSC_DMACON_TXON 0x00000002 -#define IFX_SSC_DMACON_TXOFF 0x00000000 -#define IFX_SSC_DMACON_DMAON 0x00000003 -#define IFX_SSC_DMACON_DMAOFF 0x00000000 -#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C -#define IFX_SSC_DMACON_CLASS_OFFSET 2 - -/* register access macros */ -#define ifx_ssc_fstat_received_words(status) (status & 0x003F) -#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8) - -#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE)) -#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE)) -#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB)) -#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB)) -#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT)) -#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR)) - -#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET) -#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips.h deleted file mode 100644 index c8cf0aef5c..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin - */ -#ifndef _IFXMIPS_H__ -#define _IFXMIPS_H__ - -#define ifxmips_r32(reg) __raw_readl(reg) -#define ifxmips_w32(val, reg) __raw_writel(val, reg) -#define ifxmips_w32_mask(clear, set, reg) ifxmips_w32((ifxmips_r32(reg) & ~clear) | set, reg) - -/*------------ GENERAL */ - -#define BOARD_SYSTEM_TYPE "IFXMIPS" - -#define IOPORT_RESOURCE_START 0x10000000 -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff - -#define IFXMIPS_FLASH_START 0x10000000 -#define IFXMIPS_FLASH_MAX 0x02000000 - -/*------------ ASC0/1 */ - -#define IFXMIPS_ASC_BASE_ADDR (KSEG1 + 0x1E100400) -#define IFXMIPS_ASC_BASE_DIFF (0x1E100C00 - 0x1E100400) - -#define IFXMIPS_ASC_FSTAT 0x0048 -#define IFXMIPS_ASC_TBUF 0x0020 -#define IFXMIPS_ASC_WHBSTATE 0x0018 -#define IFXMIPS_ASC_RBUF 0x0024 -#define IFXMIPS_ASC_STATE 0x0014 -#define IFXMIPS_ASC_IRNCR 0x00F8 -#define IFXMIPS_ASC_CLC 0x0000 -#define IFXMIPS_ASC_PISEL 0x0004 -#define IFXMIPS_ASC_TXFCON 0x0044 -#define IFXMIPS_ASC_RXFCON 0x0040 -#define IFXMIPS_ASC_CON 0x0010 -#define IFXMIPS_ASC_BG 0x0050 -#define IFXMIPS_ASC_IRNREN 0x00F4 - -#define IFXMIPS_ASC_CLC_DISS 0x2 -#define ASC_IRNREN_RX_BUF 0x8 -#define ASC_IRNREN_TX_BUF 0x4 -#define ASC_IRNREN_ERR 0x2 -#define ASC_IRNREN_TX 0x1 -#define ASC_IRNCR_TIR 0x4 -#define ASC_IRNCR_RIR 0x2 -#define ASC_IRNCR_EIR 0x4 -#define ASCOPT_CSIZE 0x3 -#define ASCOPT_CS7 0x1 -#define ASCOPT_CS8 0x2 -#define ASCOPT_PARENB 0x4 -#define ASCOPT_STOPB 0x8 -#define ASCOPT_PARODD 0x0 -#define ASCOPT_CREAD 0x20 -#define TXFIFO_FL 1 -#define RXFIFO_FL 1 -#define TXFIFO_FULL 16 -#define ASCCLC_RMCMASK 0x0000FF00 -#define ASCCLC_RMCOFFSET 8 -#define ASCCON_M_8ASYNC 0x0 -#define ASCCON_M_7ASYNC 0x2 -#define ASCCON_ODD 0x00000020 -#define ASCCON_STP 0x00000080 -#define ASCCON_BRS 0x00000100 -#define ASCCON_FDE 0x00000200 -#define ASCCON_R 0x00008000 -#define ASCCON_FEN 0x00020000 -#define ASCCON_ROEN 0x00080000 -#define ASCCON_TOEN 0x00100000 -#define ASCSTATE_PE 0x00010000 -#define ASCSTATE_FE 0x00020000 -#define ASCSTATE_ROE 0x00080000 -#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE) -#define ASCWHBSTATE_CLRREN 0x00000001 -#define ASCWHBSTATE_SETREN 0x00000002 -#define ASCWHBSTATE_CLRPE 0x00000004 -#define ASCWHBSTATE_CLRFE 0x00000008 -#define ASCWHBSTATE_CLRROE 0x00000020 -#define ASCTXFCON_TXFEN 0x0001 -#define ASCTXFCON_TXFFLU 0x0002 -#define ASCTXFCON_TXFITLMASK 0x3F00 -#define ASCTXFCON_TXFITLOFF 8 -#define ASCRXFCON_RXFEN 0x0001 -#define ASCRXFCON_RXFFLU 0x0002 -#define ASCRXFCON_RXFITLMASK 0x3F00 -#define ASCRXFCON_RXFITLOFF 8 -#define ASCFSTAT_RXFFLMASK 0x003F -#define ASCFSTAT_TXFFLMASK 0x3F00 -#define ASCFSTAT_TXFFLOFF 8 - - - -/*------------ RCU */ -#define IFXMIPS_RCU_BASE_ADDR 0xBF203000 - -/* reset request */ -#define IFXMIPS_RCU_RST ((u32 *)(IFXMIPS_RCU_BASE_ADDR + 0x0010)) -#define IFXMIPS_RCU_RST_CPU1 (1 << 3) -#define IFXMIPS_RCU_RST_ALL 0x40000000 - -#define IFXMIPS_RCU_RST_REQ_DFE (1 << 7) -#define IFXMIPS_RCU_RST_REQ_AFE (1 << 11) -#define IFXMIPS_RCU_RST_REQ_ARC_JTAG (1 << 20) - - -/*------------ GPTU */ - -#define IFXMIPS_GPTU_BASE_ADDR 0xB8000300 - -/* clock control register */ -#define IFXMIPS_GPTU_GPT_CLC ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0000)) - -/* captur reload register */ -#define IFXMIPS_GPTU_GPT_CAPREL ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0030)) - -/* timer 6 control register */ -#define IFXMIPS_GPTU_GPT_T6CON ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0020)) - - -/*------------ EBU */ - -#define IFXMIPS_EBU_BASE_ADDR 0xBE105300 - -/* bus configuration register */ -#define IFXMIPS_EBU_BUSCON0 ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0060)) -#define IFXMIPS_EBU_PCC_CON ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0090)) -#define IFXMIPS_EBU_PCC_IEN ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A4)) -#define IFXMIPS_EBU_PCC_ISTAT ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A0)) - - -/*------------ CGU */ -#define IFXMIPS_CGU_BASE_ADDR (KSEG1 + 0x1F103000) -#define IFXMIPS_CGU_PLL0_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0004)) -#define IFXMIPS_CGU_PLL1_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0008)) -#define IFXMIPS_CGU_PLL2_CFG ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x000C)) -#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010)) -#define IFXMIPS_CGU_UPDATE ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0014)) -#define IFXMIPS_CGU_IF_CLK ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018)) -#define IFXMIPS_CGU_OSC_CON ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x001C)) -#define IFXMIPS_CGU_SMD ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0020)) -#define IFXMIPS_CGU_CT1SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0028)) -#define IFXMIPS_CGU_CT2SR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x002C)) -#define IFXMIPS_CGU_PCMCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0030)) -#define IFXMIPS_CGU_PCI_CR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034)) -#define IFXMIPS_CGU_PD_PC ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0038)) -#define IFXMIPS_CGU_FMR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x003C)) - -/* clock mux */ -#define IFXMIPS_CGU_SYS ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010)) -#define IFXMIPS_CGU_IFCCR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018)) -#define IFXMIPS_CGU_PCICR ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034)) - -#define CLOCK_60M 60000000 -#define CLOCK_83M 83333333 -#define CLOCK_111M 111111111 -#define CLOCK_133M 133333333 -#define CLOCK_167M 166666667 -#define CLOCK_333M 333333333 - - -/*------------ CGU */ - -#define IFXMIPS_PMU_BASE_ADDR (KSEG1 + 0x1F102000) - -#define IFXMIPS_PMU_PWDCR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x001C)) -#define IFXMIPS_PMU_PWDSR ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x0020)) - - -/*------------ ICU */ - -#define IFXMIPS_ICU_BASE_ADDR 0xBF880200 - - -#define IFXMIPS_ICU_IM0_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0000)) -#define IFXMIPS_ICU_IM0_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0008)) -#define IFXMIPS_ICU_IM0_IOSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0010)) -#define IFXMIPS_ICU_IM0_IRSR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0018)) -#define IFXMIPS_ICU_IM0_IMR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0020)) - -#define IFXMIPS_ICU_IM1_ISR ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0028)) -#define IFXMIPS_ICU_IM2_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0058)) -#define IFXMIPS_ICU_IM3_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0080)) -#define IFXMIPS_ICU_IM4_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00A8)) -#define IFXMIPS_ICU_IM5_IER ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00D0)) - -#define IFXMIPS_ICU_OFFSET (IFXMIPS_ICU_IM1_ISR - IFXMIPS_ICU_IM0_ISR) - - -/*------------ ETOP */ - -#define IFXMIPS_PPE32_BASE_ADDR 0xBE180000 - -#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600 - -#define IFXMIPS_PPE32_MEM_MAP ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10000)) -#define IFXMIPS_PPE32_SRST ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10080)) - -#define MII_MODE 1 -#define REV_MII_MODE 2 - -/* mdio access */ -#define IFXMIPS_PPE32_MDIO_CFG ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11800)) -#define IFXMIPS_PPE32_MDIO_ACC ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11804)) - -#define MDIO_ACC_REQUEST 0x80000000 -#define MDIO_ACC_READ 0x40000000 -#define MDIO_ACC_ADDR_MASK 0x1f -#define MDIO_ACC_ADDR_OFFSET 0x15 -#define MDIO_ACC_REG_MASK 0xff -#define MDIO_ACC_REG_OFFSET 0x10 -#define MDIO_ACC_VAL_MASK 0xffff - -/* configuration */ -#define IFXMIPS_PPE32_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1808)) - -#define PPE32_MII_MASK 0xfffffffc -#define PPE32_MII_NORMAL 0x8 -#define PPE32_MII_REVERSE 0xe - -/* packet length */ -#define IFXMIPS_PPE32_IG_PLEN_CTRL ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1820)) - -#define PPE32_PLEN_OVER 0x5ee -#define PPE32_PLEN_UNDER 0x400000 - -/* enet */ -#define IFXMIPS_PPE32_ENET_MAC_CFG ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1840)) - -#define PPE32_CGEN 0x800 - - -/*------------ DMA */ -#define IFXMIPS_DMA_BASE_ADDR 0xBE104100 - -#define IFXMIPS_DMA_CS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x18)) -#define IFXMIPS_DMA_CIE ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x2C)) -#define IFXMIPS_DMA_IRNEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0xf4)) -#define IFXMIPS_DMA_CCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x1C)) -#define IFXMIPS_DMA_CIS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x28)) -#define IFXMIPS_DMA_CDLEN ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x24)) -#define IFXMIPS_DMA_PS ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x40)) -#define IFXMIPS_DMA_PCTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x44)) -#define IFXMIPS_DMA_CTRL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x10)) -#define IFXMIPS_DMA_CPOLL ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x14)) -#define IFXMIPS_DMA_CDBA ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x20)) - - -/*------------ PCI */ -#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400) - -#define PCI_CR_FCI_ADDR_MAP0 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C0)) -#define PCI_CR_FCI_ADDR_MAP1 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C4)) -#define PCI_CR_FCI_ADDR_MAP2 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C8)) -#define PCI_CR_FCI_ADDR_MAP3 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00CC)) -#define PCI_CR_FCI_ADDR_MAP4 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D0)) -#define PCI_CR_FCI_ADDR_MAP5 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D4)) -#define PCI_CR_FCI_ADDR_MAP6 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D8)) -#define PCI_CR_FCI_ADDR_MAP7 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00DC)) -#define PCI_CR_CLK_CTRL ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0000)) -#define PCI_CR_PCI_MOD ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0030)) -#define PCI_CR_PC_ARB ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0080)) -#define PCI_CR_FCI_ADDR_MAP11hg ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E4)) -#define PCI_CR_BAR11MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0044)) -#define PCI_CR_BAR12MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0048)) -#define PCI_CR_BAR13MASK ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x004C)) -#define PCI_CS_BASE_ADDR1 ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0010)) -#define PCI_CR_PCI_ADDR_MAP11 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0064)) -#define PCI_CR_FCI_BURST_LENGTH ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E8)) -#define PCI_CR_PCI_EOI ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x002C)) - -#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000) - -#define PCI_CS_STS_CMD ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0004)) - -#define PCI_MASTER0_REQ_MASK_2BITS 8 -#define PCI_MASTER1_REQ_MASK_2BITS 10 -#define PCI_MASTER2_REQ_MASK_2BITS 12 -#define INTERNAL_ARB_ENABLE_BIT 0 - - -/*------------ WDT */ - -#define IFXMIPS_WDT_BASE_ADDR (KSEG1 + 0x1F880000) - -#define IFXMIPS_BIU_WDT_CR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F0)) -#define IFXMIPS_BIU_WDT_SR ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F8)) - - -/*------------ LED */ - -#define IFXMIPS_LED_BASE_ADDR (KSEG1 + 0x1E100BB0) -#define IFXMIPS_LED_CON0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0000)) -#define IFXMIPS_LED_CON1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0004)) -#define IFXMIPS_LED_CPU0 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0008)) -#define IFXMIPS_LED_CPU1 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x000C)) -#define IFXMIPS_LED_AR ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0010)) - -#define LED_CON0_SWU (1 << 31) -#define LED_CON0_AD1 (1 << 25) -#define LED_CON0_AD0 (1 << 24) - -#define IFXMIPS_LED_2HZ (0) -#define IFXMIPS_LED_4HZ (1 << 23) -#define IFXMIPS_LED_8HZ (2 << 23) -#define IFXMIPS_LED_10HZ (3 << 23) -#define IFXMIPS_LED_MASK (0xf << 23) - -#define IFXMIPS_LED_UPD_SRC_FPI (1 << 31) -#define IFXMIPS_LED_UPD_MASK (3 << 30) -#define IFXMIPS_LED_ADSL_SRC (3 << 24) - -#define IFXMIPS_LED_GROUP0 (1 << 0) -#define IFXMIPS_LED_GROUP1 (1 << 1) -#define IFXMIPS_LED_GROUP2 (1 << 2) - -#define IFXMIPS_LED_RISING 0 -#define IFXMIPS_LED_FALLING (1 << 26) -#define IFXMIPS_LED_EDGE_MASK (1 << 26) - - -/*------------ GPIO */ - -#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00) - -#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010)) -#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040)) -#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014)) -#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044)) -#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018)) -#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048)) -#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C)) -#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C)) -#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020)) -#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050)) -#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024)) -#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054)) -#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028)) -#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058)) -#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C)) -#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C)) -#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030)) -#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060)) - - -/*------------ SSC */ - -#define IFXMIPS_SSC_BASE_ADDR (KSEG1 + 0x1e100800) - - -#define IFXMIPS_SSC_CLC ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0000)) -#define IFXMIPS_SSC_IRN ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x00F4)) -#define IFXMIPS_SSC_SFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0060)) -#define IFXMIPS_SSC_WHBGPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0078)) -#define IFXMIPS_SSC_STATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0014)) -#define IFXMIPS_SSC_WHBSTATE ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0018)) -#define IFXMIPS_SSC_FSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0038)) -#define IFXMIPS_SSC_ID ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0008)) -#define IFXMIPS_SSC_TB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0020)) -#define IFXMIPS_SSC_RXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0030)) -#define IFXMIPS_SSC_TXFCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0034)) -#define IFXMIPS_SSC_CON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0010)) -#define IFXMIPS_SSC_GPOSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0074)) -#define IFXMIPS_SSC_RB ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0024)) -#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084)) -#define IFXMIPS_SSC_GPOCON ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0070)) -#define IFXMIPS_SSC_BR ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0040)) -#define IFXMIPS_SSC_RXREQ ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0080)) -#define IFXMIPS_SSC_SFSTAT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0064)) -#define IFXMIPS_SSC_RXCNT ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084)) - - -/*------------ MEI */ - -#define IFXMIPS_MEI_BASE_ADDR (KSEG1 + 0x1E116000) - -#define MEI_DATA_XFR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0000)) -#define MEI_VERSION ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0004)) -#define MEI_ARC_GP_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0008)) -#define MEI_DATA_XFR_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x000C)) -#define MEI_XFR_ADDR ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0010)) -#define MEI_MAX_WAIT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0014)) -#define MEI_TO_ARC_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0018)) -#define ARC_TO_MEI_INT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x001C)) -#define ARC_TO_MEI_INT_MASK ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0020)) -#define MEI_DEBUG_WAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0024)) -#define MEI_DEBUG_RAD ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0028)) -#define MEI_DEBUG_DATA ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x002C)) -#define MEI_DEBUG_DEC ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0030)) -#define MEI_CONFIG ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0034)) -#define MEI_RST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0038)) -#define MEI_DBG_MASTER ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x003C)) -#define MEI_CLK_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0040)) -#define MEI_BIST_CONTROL ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0044)) -#define MEI_BIST_STAT ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0048)) -#define MEI_XDATA_BASE_SH ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x004c)) -#define MEI_XDATA_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0050)) -#define MEI_XMEM_BAR_BASE ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054)) -#define MEI_XMEM_BAR0 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054)) -#define MEI_XMEM_BAR1 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0058)) -#define MEI_XMEM_BAR2 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x005C)) -#define MEI_XMEM_BAR3 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0060)) -#define MEI_XMEM_BAR4 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0064)) -#define MEI_XMEM_BAR5 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0068)) -#define MEI_XMEM_BAR6 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x006C)) -#define MEI_XMEM_BAR7 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0070)) -#define MEI_XMEM_BAR8 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0074)) -#define MEI_XMEM_BAR9 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0078)) -#define MEI_XMEM_BAR10 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x007C)) -#define MEI_XMEM_BAR11 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0080)) -#define MEI_XMEM_BAR12 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0084)) -#define MEI_XMEM_BAR13 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0088)) -#define MEI_XMEM_BAR14 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x008C)) -#define MEI_XMEM_BAR15 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0090)) -#define MEI_XMEM_BAR16 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0094)) - - -/*------------ DEU */ - -#define IFXMIPS_DEU_BASE (KSEG1 + 0x1E103100) -#define IFXMIPS_DEU_CLK ((u32 *)(IFXMIPS_DEU_BASE + 0x0000)) -#define IFXMIPS_DEU_ID ((u32 *)(IFXMIPS_DEU_BASE + 0x0008)) - -#define IFXMIPS_DES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0010)) -#define IFXMIPS_DES_IHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0014)) -#define IFXMIPS_DES_ILR ((u32 *)(IFXMIPS_DEU_BASE + 0x0018)) -#define IFXMIPS_DES_K1HR ((u32 *)(IFXMIPS_DEU_BASE + 0x001C)) -#define IFXMIPS_DES_K1LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0020)) -#define IFXMIPS_DES_K3HR ((u32 *)(IFXMIPS_DEU_BASE + 0x0024)) -#define IFXMIPS_DES_K3LR ((u32 *)(IFXMIPS_DEU_BASE + 0x0028)) -#define IFXMIPS_DES_IVHR ((u32 *)(IFXMIPS_DEU_BASE + 0x002C)) -#define IFXMIPS_DES_IVLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0030)) -#define IFXMIPS_DES_OHR ((u32 *)(IFXMIPS_DEU_BASE + 0x0040)) -#define IFXMIPS_DES_OLR ((u32 *)(IFXMIPS_DEU_BASE + 0x0050)) -#define IFXMIPS_AES_CON ((u32 *)(IFXMIPS_DEU_BASE + 0x0050)) -#define IFXMIPS_AES_ID3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0054)) -#define IFXMIPS_AES_ID2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0058)) -#define IFXMIPS_AES_ID1R ((u32 *)(IFXMIPS_DEU_BASE + 0x005C)) -#define IFXMIPS_AES_ID0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0060)) -#define IFXMIPS_AES_K7R ((u32 *)(IFXMIPS_DEU_BASE + 0x0064)) -#define IFXMIPS_AES_K6R ((u32 *)(IFXMIPS_DEU_BASE + 0x0068)) -#define IFXMIPS_AES_K5R ((u32 *)(IFXMIPS_DEU_BASE + 0x006C)) -#define IFXMIPS_AES_K4R ((u32 *)(IFXMIPS_DEU_BASE + 0x0070)) -#define IFXMIPS_AES_K3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0074)) -#define IFXMIPS_AES_K2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0078)) -#define IFXMIPS_AES_K1R ((u32 *)(IFXMIPS_DEU_BASE + 0x007C)) -#define IFXMIPS_AES_K0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0080)) -#define IFXMIPS_AES_IV3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0084)) -#define IFXMIPS_AES_IV2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0088)) -#define IFXMIPS_AES_IV1R ((u32 *)(IFXMIPS_DEU_BASE + 0x008C)) -#define IFXMIPS_AES_IV0R ((u32 *)(IFXMIPS_DEU_BASE + 0x0090)) -#define IFXMIPS_AES_0D3R ((u32 *)(IFXMIPS_DEU_BASE + 0x0094)) -#define IFXMIPS_AES_0D2R ((u32 *)(IFXMIPS_DEU_BASE + 0x0098)) -#define IFXMIPS_AES_OD1R ((u32 *)(IFXMIPS_DEU_BASE + 0x009C)) -#define IFXMIPS_AES_OD0R ((u32 *)(IFXMIPS_DEU_BASE + 0x00A0)) - -/*------------ FUSE */ - -#define IFXMIPS_FUSE_BASE_ADDR (KSEG1 + 0x1F107354) - - -/*------------ MPS */ - -#define IFXMIPS_MPS_BASE_ADDR (KSEG1 + 0x1F107000) -#define IFXMIPS_MPS_SRAM ((u32 *)(KSEG1 + 0x1F200000)) - -#define IFXMIPS_MPS_CHIPID ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0344)) -#define IFXMIPS_MPS_VC0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0000)) -#define IFXMIPS_MPS_VC1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0004)) -#define IFXMIPS_MPS_VC2ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0008)) -#define IFXMIPS_MPS_VC3ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x000C)) -#define IFXMIPS_MPS_RVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0010)) -#define IFXMIPS_MPS_RVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0014)) -#define IFXMIPS_MPS_RVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0018)) -#define IFXMIPS_MPS_RVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x001C)) -#define IFXMIPS_MPS_SVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0020)) -#define IFXMIPS_MPS_SVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0024)) -#define IFXMIPS_MPS_SVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0028)) -#define IFXMIPS_MPS_SVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x002C)) -#define IFXMIPS_MPS_CVC0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0030)) -#define IFXMIPS_MPS_CVC1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0034)) -#define IFXMIPS_MPS_CVC2SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0038)) -#define IFXMIPS_MPS_CVC3SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x003C)) -#define IFXMIPS_MPS_RAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0040)) -#define IFXMIPS_MPS_RAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0044)) -#define IFXMIPS_MPS_SAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0048)) -#define IFXMIPS_MPS_SAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x004C)) -#define IFXMIPS_MPS_CAD0SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0050)) -#define IFXMIPS_MPS_CAD1SR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0054)) -#define IFXMIPS_MPS_AD0ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0058)) -#define IFXMIPS_MPS_AD1ENR ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x005C)) - -#define IFXMIPS_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) -#define IFXMIPS_MPS_CHIPID_VERSION_SET(value) ((((1 << 4) - 1) & (value)) << 28) -#define IFXMIPS_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1)) -#define IFXMIPS_MPS_CHIPID_PARTNUM_SET(value) ((((1 << 16) - 1) & (value)) << 12) -#define IFXMIPS_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1)) -#define IFXMIPS_MPS_CHIPID_MANID_SET(value) ((((1 << 10) - 1) & (value)) << 1) - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_cgu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_cgu.h deleted file mode 100644 index 899bbbca3e..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_cgu.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin - */ -#ifndef _IFXMIPS_CGU_H__ -#define _IFXMIPS_CGU_H__ - -unsigned int cgu_get_mips_clock(int cpu); -unsigned int cgu_get_io_region_clock(void); -unsigned int cgu_get_fpi_bus_clock(int fpi); -void cgu_setup_pci_clk(int internal_clock); -unsigned int ifxmips_get_ddr_hz(void); -unsigned int ifxmips_get_fpi_hz(void); -unsigned int ifxmips_get_cpu_hz(void); - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_dma.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_dma.h deleted file mode 100644 index 8ba852a1ec..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_dma.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin - * - */ -#ifndef _IFXMIPS_DMA_H__ -#define _IFXMIPS_DMA_H__ - -#define RCV_INT 1 -#define TX_BUF_FULL_INT 2 -#define TRANSMIT_CPT_INT 4 -#define IFXMIPS_DMA_CH_ON 1 -#define IFXMIPS_DMA_CH_OFF 0 -#define IFXMIPS_DMA_CH_DEFAULT_WEIGHT 100 - -enum attr_t{ - TX = 0, - RX = 1, - RESERVED = 2, - DEFAULT = 3, -}; - -#define DMA_OWN 1 -#define CPU_OWN 0 -#define DMA_MAJOR 250 - -#define DMA_DESC_OWN_CPU 0x0 -#define DMA_DESC_OWN_DMA 0x80000000 -#define DMA_DESC_CPT_SET 0x40000000 -#define DMA_DESC_SOP_SET 0x20000000 -#define DMA_DESC_EOP_SET 0x10000000 - -#define MISCFG_MASK 0x40 -#define RDERR_MASK 0x20 -#define CHOFF_MASK 0x10 -#define DESCPT_MASK 0x8 -#define DUR_MASK 0x4 -#define EOP_MASK 0x2 - -#define DMA_DROP_MASK (1<<31) - -#define IFXMIPS_DMA_RX -1 -#define IFXMIPS_DMA_TX 1 - -struct dma_chan_map { - const char *dev_name; - enum attr_t dir; - int pri; - int irq; - int rel_chan_no; -}; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -struct rx_desc { - u32 data_length:16; - volatile u32 reserved:7; - volatile u32 byte_offset:2; - volatile u32 Burst_length_offset:3; - volatile u32 EoP:1; - volatile u32 Res:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer; /* fixme: should be 28 bits here */ -}; - -struct tx_desc { - volatile u32 data_length:16; - volatile u32 reserved1:7; - volatile u32 byte_offset:5; - volatile u32 EoP:1; - volatile u32 SoP:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer; /* fixme: should be 28 bits here */ -}; -#else /* BIG */ -struct rx_desc { - union { - struct { - volatile u32 OWN:1; - volatile u32 C:1; - volatile u32 SoP:1; - volatile u32 EoP:1; - volatile u32 Burst_length_offset:3; - volatile u32 byte_offset:2; - volatile u32 reserve:7; - volatile u32 data_length:16; - } field; - volatile u32 word; - } status; - volatile u32 Data_Pointer; -}; - -struct tx_desc { - union { - struct { - volatile u32 OWN:1; - volatile u32 C:1; - volatile u32 SoP:1; - volatile u32 EoP:1; - volatile u32 byte_offset:5; - volatile u32 reserved:7; - volatile u32 data_length:16; - } field; - volatile u32 word; - } status; - volatile u32 Data_Pointer; -}; -#endif /* ENDIAN */ - -struct dma_channel_info { - /* relative channel number */ - int rel_chan_no; - /* class for this channel for QoS */ - int pri; - /* specify byte_offset */ - int byte_offset; - /* direction */ - int dir; - /* irq number */ - int irq; - /* descriptor parameter */ - int desc_base; - int desc_len; - int curr_desc; - int prev_desc; /* only used if it is a tx channel*/ - /* weight setting for WFQ algorithm*/ - int weight; - int default_weight; - int packet_size; - int burst_len; - /* on or off of this channel */ - int control; - /* optional information for the upper layer devices */ -#if defined(CONFIG_IFXMIPS_ETHERNET_D2) || defined(CONFIG_IFXMIPS_PPA) - void *opt[64]; -#else - void *opt[25]; -#endif - /* Pointer to the peripheral device who is using this channel */ - void *dma_dev; - /* channel operations */ - void (*open)(struct dma_channel_info *pCh); - void (*close)(struct dma_channel_info *pCh); - void (*reset)(struct dma_channel_info *pCh); - void (*enable_irq)(struct dma_channel_info *pCh); - void (*disable_irq)(struct dma_channel_info *pCh); -}; - -struct dma_device_info { - /* device name of this peripheral */ - char device_name[15]; - int reserved; - int tx_burst_len; - int rx_burst_len; - int default_weight; - int current_tx_chan; - int current_rx_chan; - int num_tx_chan; - int num_rx_chan; - int max_rx_chan_num; - int max_tx_chan_num; - struct dma_channel_info *tx_chan[20]; - struct dma_channel_info *rx_chan[20]; - /*functions, optional*/ - u8 *(*buffer_alloc)(int len, int *offset, void **opt); - void (*buffer_free)(u8 *dataptr, void *opt); - int (*intr_handler)(struct dma_device_info *info, int status); - void *priv; /* used by peripheral driver only */ -}; - -struct dma_device_info *dma_device_reserve(char *dev_name); -void dma_device_release(struct dma_device_info *dev); -void dma_device_register(struct dma_device_info *info); -void dma_device_unregister(struct dma_device_info *info); -int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt); -int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len, - void *opt); - -#endif - diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_ebu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_ebu.h deleted file mode 100644 index 4c9396ae88..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_ebu.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin - */ -#ifndef _IFXMIPS_EBU_H__ -#define _IFXMIPS_EBU_H__ - -extern spinlock_t ebu_lock; - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gpio.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gpio.h deleted file mode 100644 index a4c8c3ffb1..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gpio.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * Copyright (C) 2007 John Crispin - */ -#ifndef _IFXMIPS_GPIO_H__ -#define _IFXMIPS_GPIO_H__ - -extern int ifxmips_port_reserve_pin(unsigned int port, unsigned int pin); -extern int ifxmips_port_free_pin(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_open_drain(unsigned int port, unsigned int pin); -extern int ifxmips_port_clear_open_drain(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_pudsel(unsigned int port, unsigned int pin); -extern int ifxmips_port_clear_pudsel(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_puden(unsigned int port, unsigned int pin); -extern int ifxmips_port_clear_puden(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_stoff(unsigned int port, unsigned int pin); -extern int ifxmips_port_clear_stoff(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_dir_out(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_dir_in(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_output(unsigned int port, unsigned int pin); -extern int ifxmips_port_clear_output(unsigned int port, unsigned int pin); -extern int ifxmips_port_get_input(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_altsel0(unsigned int port, unsigned int pin); -extern int ifxmips_port_clear_altsel0(unsigned int port, unsigned int pin); -extern int ifxmips_port_set_altsel1(unsigned int port, unsigned int pin); -extern int ifxmips_port_clear_altsel1(unsigned int port, unsigned int pin); - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gptu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gptu.h deleted file mode 100644 index 330c3cfd55..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gptu.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ -#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ - - -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ - - -/* - * #################################### - * Definition - * #################################### - */ - -/* - * Available Timer/Counter Index - */ -#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) -#define TIMER_ANY 0x00 -#define TIMER1A TIMER(1, 0) -#define TIMER1B TIMER(1, 1) -#define TIMER2A TIMER(2, 0) -#define TIMER2B TIMER(2, 1) -#define TIMER3A TIMER(3, 0) -#define TIMER3B TIMER(3, 1) - -/* - * Flag of Timer/Counter - * These flags specify the way in which timer is configured. - */ -/* Bit size of timer/counter. */ -#define TIMER_FLAG_16BIT 0x0000 -#define TIMER_FLAG_32BIT 0x0001 -/* Switch between timer and counter. */ -#define TIMER_FLAG_TIMER 0x0000 -#define TIMER_FLAG_COUNTER 0x0002 -/* Stop or continue when overflowing/underflowing. */ -#define TIMER_FLAG_ONCE 0x0000 -#define TIMER_FLAG_CYCLIC 0x0004 -/* Count up or counter down. */ -#define TIMER_FLAG_UP 0x0000 -#define TIMER_FLAG_DOWN 0x0008 -/* Count on specific level or edge. */ -#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 -#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 -#define TIMER_FLAG_RISE_EDGE 0x0010 -#define TIMER_FLAG_FALL_EDGE 0x0020 -#define TIMER_FLAG_ANY_EDGE 0x0030 -/* Signal is syncronous to module clock or not. */ -#define TIMER_FLAG_UNSYNC 0x0000 -#define TIMER_FLAG_SYNC 0x0080 -/* Different interrupt handle type. */ -#define TIMER_FLAG_NO_HANDLE 0x0000 -#if defined(__KERNEL__) - #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 -#endif // defined(__KERNEL__) -#define TIMER_FLAG_SIGNAL 0x0300 -/* Internal clock source or external clock source */ -#define TIMER_FLAG_INT_SRC 0x0000 -#define TIMER_FLAG_EXT_SRC 0x1000 - - -/* - * ioctl Command - */ -#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ -#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ -#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ -#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ -#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ -#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ -#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ -#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ - -/* - * Data Type Used to Call ioctl - */ -struct gptu_ioctl_param { - unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * - * GPTU_SET_COUNTER, this field is ID of expected * - * timer/counter. If it's zero, a timer/counter would * - * be dynamically allocated and ID would be stored in * - * this field. * - * In command GPTU_GET_COUNT_VALUE, this field is * - * ignored. * - * In other command, this field is ID of timer/counter * - * allocated. */ - unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * - * GPTU_SET_COUNTER, this field contains flags to * - * specify how to configure timer/counter. * - * In command GPTU_START_TIMER, zero indicate start * - * and non-zero indicate resume timer/counter. * - * In other command, this field is ignored. */ - unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * - * init/reload value. * - * In command GPTU_SET_TIMER, this field contains * - * frequency (0.001Hz) of timer. * - * In command GPTU_GET_COUNT_VALUE, current count * - * value would be stored in this field. * - * In command GPTU_CALCULATE_DIVIDER, this field * - * contains frequency wanted, and after calculation, * - * divider would be stored in this field to overwrite * - * the frequency. * - * In other command, this field is ignored. */ - int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * - * if signal is required, this field contains process * - * ID to which signal would be sent. * - * In other command, this field is ignored. */ - int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * - * if signal is required, this field contains signal * - * number which would be sent. * - * In other command, this field is ignored. */ -}; - -/* - * #################################### - * Data Type - * #################################### - */ -typedef void (*timer_callback)(unsigned long arg); - -extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); -extern int ifxmips_free_timer(unsigned int); -extern int ifxmips_start_timer(unsigned int, int); -extern int ifxmips_stop_timer(unsigned int); -extern int ifxmips_reset_counter_flags(u32 timer, u32 flags); -extern int ifxmips_get_count_value(unsigned int, unsigned long *); -extern u32 ifxmips_cal_divider(unsigned long); -extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); -extern int ifxmips_set_counter(unsigned int timer, unsigned int flag, - u32 reload, unsigned long arg1, unsigned long arg2); - -#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_irq.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_irq.h deleted file mode 100644 index c7bd373fcf..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_irq.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2005 infineon - * Copyright (C) 2007 John Crispin - */ -#ifndef _IFXMIPS_IRQ__ -#define _IFXMIPS_IRQ__ - -#define INT_NUM_IRQ0 8 -#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) -#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) -#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) -#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) -#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) -#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) - -#define IFXMIPSASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 7)) -#define IFXMIPSASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 2) -#define IFXMIPSASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 7) + 3) - -#define IFXMIPS_SSC_TIR (INT_NUM_IM0_IRL0 + 15) -#define IFXMIPS_SSC_RIR (INT_NUM_IM0_IRL0 + 14) -#define IFXMIPS_SSC_EIR (INT_NUM_IM0_IRL0 + 16) - -#define IFXMIPS_MEI_INT (INT_NUM_IM1_IRL0 + 23) - -#define IFXMIPS_TIMER6_INT (INT_NUM_IM1_IRL0 + 23) -#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23) - -#define MIPS_CPU_TIMER_IRQ 7 - -#define IFXMIPS_DMA_CH0_INT (INT_NUM_IM2_IRL0) -#define IFXMIPS_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1) -#define IFXMIPS_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2) -#define IFXMIPS_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3) -#define IFXMIPS_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4) -#define IFXMIPS_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5) -#define IFXMIPS_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6) -#define IFXMIPS_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7) -#define IFXMIPS_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8) -#define IFXMIPS_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9) -#define IFXMIPS_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10) -#define IFXMIPS_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11) -#define IFXMIPS_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25) -#define IFXMIPS_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26) -#define IFXMIPS_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27) -#define IFXMIPS_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28) -#define IFXMIPS_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29) -#define IFXMIPS_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30) -#define IFXMIPS_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16) -#define IFXMIPS_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21) - -#define IFXMIPS_USB_INT (INT_NUM_IM4_IRL0 + 22) -#define IFXMIPS_USB_OC_INT (INT_NUM_IM4_IRL0 + 23) - - -extern void ifxmips_mask_and_ack_irq(unsigned int irq_nr); - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h deleted file mode 100644 index c97657a89f..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin - */ -#ifndef _IFXMIPS_LED_H__ -#define _IFXMIPS_LED_H__ - -extern void ifxmips_led_set(unsigned int led); -extern void ifxmips_led_clear(unsigned int led); -extern void ifxmips_led_blink_set(unsigned int led); -extern void ifxmips_led_blink_clear(unsigned int led); - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h deleted file mode 100644 index d8a4b8867f..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h +++ /dev/null @@ -1,270 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : danube_mei.h -** PROJECT : Danube -** MODULES : MEI -** -** DATE : 1 Jan 2006 -** AUTHOR : TC Chen -** DESCRIPTION : MEI Driver -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Version $Date $Author $Comment -*******************************************************************************/ -#ifndef _IFXMIPS_MEI_H -#define _IFXMIPS_MEI_H -///////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#include "ifxmips_mei_app.h" - -#define IFXMIPS_MEI_DEBUG -#define IFXMIPS_MEI_CMV_EXTRA -#define IFXMIPS_MEI_MAJOR 106 - -/* -** Define where in ME Processor's memory map the Stratify chip lives -*/ - -#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) - -// Mailboxes -#define MSG_LENGTH 16 // x16 bits -#define YES_REPLY 1 -#define NO_REPLY 0 - -#define CMV_TIMEOUT 100 //jiffies -#define MIB_INTERVAL 10000 //msec - -/*** Bit definitions ***/ - -#define FALSE 0 -#define TRUE 1 -#define BIT0 1<<0 -#define BIT1 1<<1 -#define BIT2 1<<2 -#define BIT3 1<<3 -#define BIT4 1<<4 -#define BIT5 1<<5 -#define BIT6 1<<6 -#define BIT7 1<<7 -#define BIT8 1<<8 -#define BIT9 1<<9 -#define BIT10 1<<10 -#define BIT11 1<<11 -#define BIT12 1<<12 -#define BIT13 1<<13 -#define BIT14 1<<14 -#define BIT15 1<<15 -#define BIT16 1<<16 -#define BIT17 1<<17 -#define BIT18 1<<18 -#define BIT19 1<<19 -#define BIT20 1<<20 -#define BIT21 1<<21 -#define BIT22 1<<22 -#define BIT23 1<<23 -#define BIT24 1<<24 -#define BIT25 1<<25 -#define BIT26 1<<26 -#define BIT27 1<<27 -#define BIT28 1<<28 -#define BIT29 1<<29 -#define BIT30 1<<30 -#define BIT31 1<<31 - -// ARC register addresss -#define ARC_STATUS 0x0 -#define ARC_LP_START 0x2 -#define ARC_LP_END 0x3 -#define ARC_DEBUG 0x5 -#define ARC_INT_MASK 0x10A - -#define IRAM0_BASE (0x00000) -#define IRAM1_BASE (0x04000) -#define BRAM_BASE (0x0A000) - -#define ADSL_BASE (0x20000) -#define CRI_BASE (ADSL_BASE + 0x11F00) -#define CRI_CCR0 (CRI_BASE + 0x00) -#define CRI_RST (CRI_BASE + 0x04*4) -#define ADSL_DILV_BASE (ADSL_BASE+0x20000) - -// -#define IRAM0_ADDR_BIT_MASK 0xFFF -#define IRAM1_ADDR_BIT_MASK 0xFFF -#define BRAM_ADDR_BIT_MASK 0xFFF -#define RX_DILV_ADDR_BIT_MASK 0x1FFF - -// CRI_CCR0 Register definitions -#define CLK_2M_MODE_ENABLE BIT6 -#define ACL_CLK_MODE_ENABLE BIT4 -#define FDF_CLK_MODE_ENABLE BIT2 -#define STM_CLK_MODE_ENABLE BIT0 - -// CRI_RST Register definitions -#define FDF_SRST BIT3 -#define MTE_SRST BIT2 -#define FCI_SRST BIT1 -#define AAI_SRST BIT0 - -// MEI_TO_ARC_INTERRUPT Register definitions -#define MEI_TO_ARC_INT1 BIT3 -#define MEI_TO_ARC_INT0 BIT2 -#define MEI_TO_ARC_CS_DONE BIT1 //need to check -#define MEI_TO_ARC_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT Register definitions -#define ARC_TO_MEI_INT1 BIT8 -#define ARC_TO_MEI_INT0 BIT7 -#define ARC_TO_MEI_CS_REQ BIT6 -#define ARC_TO_MEI_DBG_DONE BIT5 -#define ARC_TO_MEI_MSGACK BIT4 -#define ARC_TO_MEI_NO_ACCESS BIT3 -#define ARC_TO_MEI_CHECK_AAITX BIT2 -#define ARC_TO_MEI_CHECK_AAIRX BIT1 -#define ARC_TO_MEI_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT_MASK Register definitions -#define GP_INT1_EN BIT8 -#define GP_INT0_EN BIT7 -#define CS_REQ_EN BIT6 -#define DBG_DONE_EN BIT5 -#define MSGACK_EN BIT4 -#define NO_ACC_EN BIT3 -#define AAITX_EN BIT2 -#define AAIRX_EN BIT1 -#define MSGAV_EN BIT0 - -#define MEI_SOFT_RESET BIT0 - -#define HOST_MSTR BIT0 - -#define JTAG_MASTER_MODE 0x0 -#define MEI_MASTER_MODE HOST_MSTR - -// MEI_DEBUG_DECODE Register definitions -#define MEI_DEBUG_DEC_MASK (0x3) -#define MEI_DEBUG_DEC_AUX_MASK (0x0) -#define MEI_DEBUG_DEC_DMP1_MASK (0x1) -#define MEI_DEBUG_DEC_DMP2_MASK (0x2) -#define MEI_DEBUG_DEC_CORE_MASK (0x3) - -#define AUX_STATUS (0x0) -// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate -// page swap requests. -#define MEI_TO_ARC_MAILBOX (0xDFD0) -#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C) - -#define ARC_TO_MEI_MAILBOX (0xDFA0) -#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C) - -// Codeswap request messages are indicated by setting BIT31 -#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) - -// Clear Eoc messages received are indicated by setting BIT17 -#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000) - -/* -** Swap page header -*/ -// Page must be loaded at boot time if size field has BIT31 set -#define BOOT_FLAG (BIT31) -#define BOOT_FLAG_MASK ~BOOT_FLAG - -#define FREE_RELOAD 1 -#define FREE_SHOWTIME 2 -#define FREE_ALL 3 - -#define IFX_POP_EOC_DONE 0 -#define IFX_POP_EOC_FAIL -1 - -#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered - -// marcos -#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0) -#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) -#define SET_BIT(reg, mask) reg |= (mask) -#define CLEAR_BIT(reg, mask) reg &= (~mask) -#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) -#define SET_BITS(reg, mask) SET_BIT(reg, mask) -#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} - -#define ALIGN_SIZE ( 1L<<10 ) //1K size align -#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) ) - -// swap marco -#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);} -#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);} - -// Swap page header describes size in 32-bit words, load location, and image offset -// for program and/or data segments -typedef struct _arc_swp_page_hdr { - u32 p_offset; //Offset bytes of progseg from beginning of image - u32 p_dest; //Destination addr of progseg on processor - u32 p_size; //Size in 32-bitwords of program segment - u32 d_offset; //Offset bytes of dataseg from beginning of image - u32 d_dest; //Destination addr of dataseg on processor - u32 d_size; //Size in 32-bitwords of data segment -} ARC_SWP_PAGE_HDR; - -#ifdef CONFIG_PROC_FS -typedef struct reg_entry { - int *flag; - char name[30]; // big enough to hold names - char description[100]; // big enough to hold description - unsigned short low_ino; -} reg_entry_t; -#endif - -/* -** Swap image header -*/ -#define GET_PROG 0 // Flag used for program mem segment -#define GET_DATA 1 // Flag used for data mem segment - -// Image header contains size of image, checksum for image, and count of -// page headers. Following that are 'count' page headers followed by -// the code and/or data segments to be loaded -typedef struct _arc_img_hdr { - u32 size; // Size of binary image in bytes - u32 checksum; // Checksum for image - u32 count; // Count of swp pages in image - ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy -} ARC_IMG_HDR; - -typedef struct smmu_mem_info { - int type; - unsigned long nCopy; - unsigned long size; - unsigned char *address; - unsigned char *org_address; -} smmu_mem_info_t; - -/* -** Native size for the Stratiphy interface is 32-bits. All reads and writes -** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or -** byte data. Read routines are provided. Write routines are probably a bad idea, as the -** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle -** could very well have unintended results. -*/ -MEI_ERROR meiCMV (u16 *, int, u16 *); // first arg is CMV to ARC, second to indicate whether need reply - -MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize); -extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len); -extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len); -#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS) -extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, - u16 * data, u16 * CMVMSG); -int ifx_mei_hdlc_send (char *, int); -int ifx_mei_hdlc_read (char *, int); -#endif - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h deleted file mode 100644 index cba742e58a..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h +++ /dev/null @@ -1,116 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : ifxmips_mei_app.h -** PROJECT : Danube -** MODULES : MEI -** -** DATE : 1 Jan 2006 -** AUTHOR : TC Chen -** DESCRIPTION : MEI Driver -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Version $Date $Author $Comment -*******************************************************************************/ -#ifndef _IFXMIPS_MEI_APP_H -#define _IFXMIPS_MEI_APP_H - // ioctl control -#define IFXMIPS_MEI_START 300 -#define IFXMIPS_MEI_REPLY 301 -#define IFXMIPS_MEI_NOREPLY 302 - -#define IFXMIPS_MEI_RESET 303 -#define IFXMIPS_MEI_REBOOT 304 -#define IFXMIPS_MEI_HALT 305 -#define IFXMIPS_MEI_CMV_WINHOST 306 -#define IFXMIPS_MEI_CMV_READ 307 -#define IFXMIPS_MEI_CMV_WRITE 308 -#define IFXMIPS_MEI_MIB_DAEMON 309 -#define IFXMIPS_MEI_SHOWTIME 310 -#define IFXMIPS_MEI_REMOTE 311 -#define IFXMIPS_MEI_READDEBUG 312 -#define IFXMIPS_MEI_WRITEDEBUG 313 -#define IFXMIPS_MEI_LOP 314 - -#define IFXMIPS_MEI_PCM_SETUP 315 -#define IFXMIPS_MEI_PCM_START_TIMER 316 -#define IFXMIPS_MEI_PCM_STOP_TIMER 317 -#define IFXMIPS_MEI_PCM_CHECK 318 -#define IFXMIPS_MEI_GET_EOC_LEN 319 -#define IFXMIPS_MEI_GET_EOC_DATA 320 -#define IFXMIPS_MEI_PCM_GETDATA 321 -#define IFXMIPS_MEI_PCM_GPIO 322 -#define IFXMIPS_MEI_EOC_SEND 323 -#define IFXMIPS_MEI_DOWNLOAD 326 -#define IFXMIPS_MEI_JTAG_ENABLE 327 -#define IFXMIPS_MEI_RUN 328 -#define IFXMIPS_MEI_DEBUG_MODE 329 - -/* Loop diagnostics mode of the ADSL line related constants */ -#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 330 -#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 331 -#define LOOP_DIAGNOSTIC_MODE_COMPLETE 332 -#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 333 - -/* L3 Power Mode */ -/* Get current Power Moaagement Mode Status*/ -#define GET_POWER_MANAGEMENT_MODE 334 -/* Set L3 Power Mode /disable L3 power mode */ -#define SET_L3_POWER_MODE 335 - -/* get current dual latency configuration */ -#define GET_ADSL_DUAL_LATENCY 336 -/* enable/disable dual latency path */ -#define SET_ADSL_DUAL_LATENCY 337 - -/* Enable/Disable autoboot mode. */ -/* When the autoboot mode is disabled, the driver will excute some cmv - commands for led control and dual latency when DSL startup.*/ -#define AUTOBOOT_ENABLE_SET 338 - -/* Enable/Disable Quiet Mode*/ -/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */ -#define QUIET_MODE_GET 339 -#define QUIET_MODE_SET 340 - -/* Enable/Disable showtime lock*/ -/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */ -#define SHOWTIME_LOCK_GET 341 -#define SHOWTIME_LOCK_SET 342 - -#define L0_POWER_MODE 0 -#define L2_POWER_MODE 2 -#define L3_POWER_MODE 3 - -#define DUAL_LATENCY_US_DS_DISABLE 0 -#define DUAL_LATENCY_US_ENABLE (1<<0) -#define DUAL_LATENCY_DS_ENABLE (1<<1) -#define DUAL_LATENCY_US_DS_ENABLE (DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE) - -#define ME_HDLC_IDLE 0 -#define ME_HDLC_INVALID_MSG 1 -#define ME_HDLC_MSG_QUEUED 2 -#define ME_HDLC_MSG_SENT 3 -#define ME_HDLC_RESP_RCVD 4 -#define ME_HDLC_RESP_TIMEOUT 5 -#define ME_HDLC_RX_BUF_OVERFLOW 6 -#define ME_HDLC_UNRESOLVED 1 -#define ME_HDLC_RESOLVED 2 - -/*** Enums ***/ -typedef enum mei_error { - MEI_SUCCESS = 0, - MEI_FAILURE = -1, - MEI_MAILBOX_FULL = -2, - MEI_MAILBOX_EMPTY = -3, - MEI_MAILBOX_TIMEOUT = -4, -} MEI_ERROR; - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h deleted file mode 100644 index 08c3dd3fc1..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h +++ /dev/null @@ -1,1191 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : ifxmips_mei_app_ioctl.h -** PROJECT : Danube -** MODULES : MEI -** -** DATE : 1 Jan 2006 -** AUTHOR : TC Chen -** DESCRIPTION : MEI Driver -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Version $Date $Author $Comment -*******************************************************************************/ -#ifndef __IFXMIPS_MEI_APP_IOCTL_H -#define __IFXMIPS_MEI_APP_IOCTL_H - -#ifdef __KERNEL__ -#include "ifxmips_mei_ioctl.h" -#endif - -/* Interface Name */ -//#define INTERFACE_NAME - -/* adslLineTable constants */ -#define GET_ADSL_LINE_CODE 1 - -/* adslAtucPhysTable constants */ -#define GET_ADSL_ATUC_PHY 4 - -/* adslAturPhysTable constants */ -#define GET_ADSL_ATUR_PHY 10 - -/* adslAtucChanTable constants */ -#define GET_ADSL_ATUC_CHAN_INFO 15 - -/* adslAturChanTable constants */ -#define GET_ADSL_ATUR_CHAN_INFO 18 - -/* adslAtucPerfDataTable constants */ -#define GET_ADSL_ATUC_PERF_DATA 21 - -/* adslAturPerfDataTable constants */ -#define GET_ADSL_ATUR_PERF_DATA 40 - -/* adslAtucIntervalTable constants */ -#define GET_ADSL_ATUC_INTVL_INFO 60 - -/* adslAturIntervalTable constants */ -#define GET_ADSL_ATUR_INTVL_INFO 65 - -/* adslAtucChanPerfDataTable constants */ -#define GET_ADSL_ATUC_CHAN_PERF_DATA 70 - -/* adslAturChanPerfDataTable constants */ -#define GET_ADSL_ATUR_CHAN_PERF_DATA 90 - -/* adslAtucChanIntervalTable constants */ -#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110 - -/* adslAturChanIntervalTable constants */ -#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115 - -/* adslLineAlarmConfProfileTable constants */ -#define GET_ADSL_ALRM_CONF_PROF 120 -#define SET_ADSL_ALRM_CONF_PROF 121 - -/* adslAturTrap constants */ -#define ADSL_ATUR_TRAPS 135 - -////////////////// RFC-3440 ////////////// - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -/* adslLineExtTable */ -#define GET_ADSL_ATUC_LINE_EXT 201 -#define SET_ADSL_ATUC_LINE_EXT 203 - -/* adslAtucPerfDateExtTable */ -#define GET_ADSL_ATUC_PERF_DATA_EXT 205 - -/* adslAtucIntervalExtTable */ -#define GET_ADSL_ATUC_INTVL_EXT_INFO 221 - -/* adslAturPerfDataExtTable */ -#define GET_ADSL_ATUR_PERF_DATA_EXT 225 - -/* adslAturIntervalExtTable */ -#define GET_ADSL_ATUR_INTVL_EXT_INFO 233 - -/* adslAlarmConfProfileExtTable */ -#define GET_ADSL_ALRM_CONF_PROF_EXT 235 -#define SET_ADSL_ALRM_CONF_PROF_EXT 236 - -/* adslAturExtTrap */ -#define ADSL_ATUR_EXT_TRAPS 240 - -#endif - -/* The following constants are added to support the WEB related ADSL Statistics */ - -/* adslLineStatus constants */ -#define GET_ADSL_LINE_STATUS 245 - -/* adslLineRate constants */ -#define GET_ADSL_LINE_RATE 250 - -/* adslLineInformation constants */ -#define GET_ADSL_LINE_INFO 255 - -/* adslNearEndPerformanceStats constants */ -#define GET_ADSL_NEAREND_STATS 270 - -/* adslFarEndPerformanceStats constants */ -#define GET_ADSL_FAREND_STATS 290 - -/* Sub-carrier related parameters */ -#define GET_ADSL_LINE_INIT_STATS 150 -#define GET_ADSL_POWER_SPECTRAL_DENSITY 151 - -#define IFXMIPS_MIB_LO_ATUC 295 -#define IFXMIPS_MIB_LO_ATUR 296 - -#define GET_ADSL_ATUC_SUBCARRIER_STATS 297 -#define GET_ADSL_ATUR_SUBCARRIER_STATS 298 - - - -/////////////////////////////////////////////////////////// -// makeCMV(Opcode, Group, Address, Index, Size, Data) - -/* adslLineCode Flags */ -#define LINE_CODE_FLAG 0x1 /* BIT 0th position */ - -/* adslAtucPhysTable Flags */ -#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage) -#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage) - -#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ -#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage) - -#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ -#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage) - -#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */ - -#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */ -#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage) - -#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */ -#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage) - - -/* adslAturPhysTable Flags */ -#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage) -#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage) - -#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ -#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage) - -#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ -#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage) - -#define ATUR_SNRMGN_FLAG 0x8 -#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */ -#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage) -#else -#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage) -#endif - -#define ATUR_ATTN_FLAG 0x10 -#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage) - -#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */ - -#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */ -#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage) - -#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */ -#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage) - -/* adslAtucChanTable Flags */ -#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ -//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage) -#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage) - -#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ -#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage) - -#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ - -/* adslAturChanTable Flags */ -#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ -//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage) -#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage) - -#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ -#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage) - -#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ - -#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */ - -/* adslAtucPerfDataTable Flags */ -#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage) -#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */ -#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage) -#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */ -#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ -#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ -#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ -#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ -#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */ -#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */ -#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ -#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ -#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */ -#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */ -#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ -#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ -#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */ -#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */ - -/* adslAturPerfDataTable Flags */ -#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ -#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */ -#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */ -#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage) -#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */ -#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage) -#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ -#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ -#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ -#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ -#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */ -#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */ -#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ -#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ -#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */ -#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */ -#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ -#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ -#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */ -#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */ - -/* adslAtucIntervalTable Flags */ -#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ -#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */ -#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */ -#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */ -#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ - -/* adslAturIntervalTable Flags */ -#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ -#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */ -#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */ -#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */ -#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ - -/* adslAtucChanPerfDataTable Flags */ -#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ -#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ -#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ -#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ -#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ -#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ -#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ -#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ -#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ -#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ -#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/ -#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ -#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ -#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ -#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ -#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ -#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */ -#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ -#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ - - -/* adslAturChanPerfDataTable Flags */ -#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ -#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage) -#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage) -#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ -#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage) -#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage) -#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ -#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage) -#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage) -#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ -#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage) -#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage) -#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ -#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ -#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ -#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ -#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ -#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ -#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ -#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ -#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ -#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ -#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ -#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */ -#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ -#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ - -/* adslAtucChanIntervalTable Flags */ -#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ -#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ -#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ -#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ -#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ - -/* adslAturChanIntervalTable Flags */ -#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */ -#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ -#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ -#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ -#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ -#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ - -/* adslLineAlarmConfProfileTable Flags */ -#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */ -#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */ -#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */ -#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */ -#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */ -#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */ -#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */ -#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */ -#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */ -#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */ -#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */ -#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */ -#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */ -#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */ -#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */ -#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */ -#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */ - - -/* adslAturTraps Flags */ -#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */ -#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */ -#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */ -#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */ -#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */ -#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */ -#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */ - -//RFC- 3440 FLAG DEFINITIONS - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -/* adslLineExtTable flags */ -#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */ -#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage) -#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */ -#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage) -#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage) -#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */ -#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage) -#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */ -#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage) - -/* adslAtucPerfDataExtTable flags */ -#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) -#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) -#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */ -#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage) -#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */ -#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage) -#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */ -#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */ -#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */ -#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */ -#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */ -#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */ -#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */ -#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */ -#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */ -#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */ -#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */ -#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */ - -/* adslAturPerfDataExtTable */ -#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */ -#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage) -#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */ -#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage) -#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */ -#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */ -#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */ -#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */ -#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */ -#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */ - -/* adslAutcIntervalExtTable flags */ -#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */ -#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */ -#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */ -#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */ - -/* adslAturIntervalExtTable */ -#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */ -#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */ - -/* adslAlarmConfProfileExtTable */ -#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */ -#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */ -#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */ -#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */ -#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */ - -/* adslAturExtTraps */ -#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */ -#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */ -#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */ -#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */ -#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */ - -#endif - -/* adslLineStatus Flags */ -#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */ -#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) -#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */ -#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage) -#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */ -#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage) -#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */ -#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage) - -/* adslLineRate Flags */ -#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */ -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage) - - -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage) - -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage) - -#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */ -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage) - - -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage) - -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage) - -#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */ -#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage) - -#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */ -#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage) - -/* adslLineInformation Flags */ -#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */ -#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage) -#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage) -#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */ -#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage) -#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage) -#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */ -#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage) -#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */ -#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage) -#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */ -#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage) -#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */ -#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage) -#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */ -#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage) -#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage) -#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage) -#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */ -#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage) -#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */ -#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage) -#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */ -#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage) - -/* adslNearEndPerformanceStats Flags */ -#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage) -#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage) -#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */ -#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage) -#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */ -#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */ -#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */ -#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */ -#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */ -#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */ -#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage) -#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage) -#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage) -#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage) -#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */ -#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage) -#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */ -#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage) -#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */ -#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage) -#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */ -#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage) -#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */ -#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage) -#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */ -#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage) -#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage) -#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */ - -/* adslFarEndPerformanceStats Flags */ -#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage) -#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */ -#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */ -#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */ -#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */ -#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */ -#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage) -#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage) -#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */ -#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage) -#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage) -#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */ -#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage) -#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */ -#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage) -#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */ -#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage) -#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */ -#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage) -#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */ -#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage) -#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */ -#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage) -#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage) -#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */ -// 603221:tc.chen end -/* TR-69 related additional parameters - defines */ -/* Defines for struct adslATURSubcarrierInfo */ -#define NEAREND_HLINSC 0x1 -#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data, TxMessage) -#define NEAREND_HLINPS 0x2 -#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data, TxMessage) -#define NEAREND_HLOGMT 0x4 -#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data, TxMessage) -#define NEAREND_HLOGPS 0x8 -#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data, TxMessage) -#define NEAREND_QLNMT 0x10 -#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data, TxMessage) -#define NEAREND_QLNPS 0x20 -#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data, TxMessage) -#define NEAREND_SNRMT 0x40 -#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data, TxMessage) -#define NEAREND_SNRPS 0x80 -#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data, TxMessage) -#define NEAREND_BITPS 0x100 -#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data, TxMessage) -#define NEAREND_GAINPS 0x200 -#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data, TxMessage) - -/* Defines for struct adslATUCSubcarrierInfo */ -#define FAREND_HLINSC 0x1 - -/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */ -#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 2, 1, data, TxMessage) -#define FAREND_HLINPS 0x2 -#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data, TxMessage) -#define FAREND_HLOGMT 0x4 -#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data, TxMessage) -#define FAREND_HLOGPS 0x8 -#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data, TxMessage) -#define FAREND_QLNMT 0x10 -#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data, TxMessage) -#define FAREND_QLNPS 0x20 -#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data, TxMessage) -#define FAREND_SNRMT 0x40 -#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data, TxMessage) -#define FAREND_SNRPS 0x80 -#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 11, idx, size, data, TxMessage) -#define FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data, TxMessage) -#define FAREND_BITPS 0x100 -#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data, TxMessage) -#define FAREND_GAINPS 0x200 -#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data, TxMessage) - - -// GET_ADSL_POWER_SPECTRAL_DENSITY -#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage) -#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage) -#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage) -#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage) -#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage) -#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage) - -/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing - -#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val)) -// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer - -#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0) -// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer - - -#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit)) -// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer - - -////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION - -//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type. - // -#define u32 unsigned int -#define u16 unsigned short -#define s16 short -#define u8 unsigned char - - -typedef u32 AdslPerfTimeElapsed; -typedef u32 AdslPerfPrevDayCount; -typedef u32 PerfCurrentCount; -typedef u32 PerfIntervalCount; -typedef u32 AdslPerfCurrDayCount; - - -//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry) - -typedef struct adslLineTableEntry { - int ifIndex; - int adslLineCode; - u8 flags; -} adslLineTableEntry; - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -typedef struct adslLineExtTableEntry { - int ifIndex; - u16 adslLineTransAtucCap; - u16 adslLineTransAtucConfig; - u16 adslLineTransAtucActual; - int adslLineGlitePowerState; - u32 flags; -}adslLineExtTableEntry; -#endif -//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry) -#ifndef u_char -#define u_char u8 -#endif - -typedef struct adslVendorId { - u16 country_code; - u_char provider_id[4]; /* Ascii characters */ - u_char revision_info[2]; -}adslVendorId; - -typedef struct adslAtucPhysEntry { - int ifIndex; - char serial_no[32]; - union { - char vendor_id[16]; - adslVendorId vendor_info; - } vendor_id; - char version_no[16]; - u32 status; - int outputPwr; - u32 attainableRate; - u8 flags; -} adslAtucPhysEntry; - - -//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry) - -typedef struct adslAturPhysEntry { - int ifIndex; - char serial_no[32]; - union { - char vendor_id[16]; - adslVendorId vendor_info; - } vendor_id; - char version_no[16]; - int SnrMgn; - u32 Attn; - u32 status; - int outputPwr; - u32 attainableRate; - u8 flags; -} adslAturPhysEntry; - - -//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo) - -typedef struct adslAtucChanInfo { - int ifIndex; - u32 interleaveDelay; - u32 currTxRate; - u32 prevTxRate; - u8 flags; -} adslAtucChanInfo; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo) - -typedef struct adslAturChanInfo { - int ifIndex; - u32 interleaveDelay; - u32 currTxRate; - u32 prevTxRate; - u32 crcBlkLen; - u8 flags; -} adslAturChanInfo; - - -//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry) - -typedef struct atucPerfDataEntry -{ - int ifIndex; - u32 adslAtucPerfLofs; - u32 adslAtucPerfLoss; - u32 adslAtucPerfESs; - u32 adslAtucPerfInits; - int adslAtucPerfValidIntervals; - int adslAtucPerfInvalidIntervals; - AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAtucPerfCurr15MinLofs; - PerfCurrentCount adslAtucPerfCurr15MinLoss; - PerfCurrentCount adslAtucPerfCurr15MinESs; - PerfCurrentCount adslAtucPerfCurr15MinInits; - AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs; - AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss; - AdslPerfCurrDayCount adslAtucPerfCurr1DayESs; - AdslPerfCurrDayCount adslAtucPerfCurr1DayInits; - int adslAtucPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss; - AdslPerfPrevDayCount adslAtucPerfPrev1DayESs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayInits; - u32 flags; -} atucPerfDataEntry; - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -typedef struct atucPerfDataExtEntry - { - int ifIndex; - u32 adslAtucPerfStatFastR; - u32 adslAtucPerfStatFailedFastR; - u32 adslAtucPerfStatSesL; - u32 adslAtucPerfStatUasL; - u32 adslAtucPerfCurr15MinFastR; - u32 adslAtucPerfCurr15MinFailedFastR; - u32 adslAtucPerfCurr15MinSesL; - u32 adslAtucPerfCurr15MinUasL; - u32 adslAtucPerfCurr1DayFastR; - u32 adslAtucPerfCurr1DayFailedFastR; - u32 adslAtucPerfCurr1DaySesL; - u32 adslAtucPerfCurr1DayUasL; - u32 adslAtucPerfPrev1DayFastR; - u32 adslAtucPerfPrev1DayFailedFastR; - u32 adslAtucPerfPrev1DaySesL; - u32 adslAtucPerfPrev1DayUasL; - u32 flags; -} atucPerfDataExtEntry; - -#endif -//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry) - -typedef struct aturPerfDataEntry -{ - int ifIndex; - u32 adslAturPerfLofs; - u32 adslAturPerfLoss; - u32 adslAturPerfLprs; - u32 adslAturPerfESs; - int adslAturPerfValidIntervals; - int adslAturPerfInvalidIntervals; - AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAturPerfCurr15MinLofs; - PerfCurrentCount adslAturPerfCurr15MinLoss; - PerfCurrentCount adslAturPerfCurr15MinLprs; - PerfCurrentCount adslAturPerfCurr15MinESs; - AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAturPerfCurr1DayLofs; - AdslPerfCurrDayCount adslAturPerfCurr1DayLoss; - AdslPerfCurrDayCount adslAturPerfCurr1DayLprs; - AdslPerfCurrDayCount adslAturPerfCurr1DayESs; - int adslAturPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAturPerfPrev1DayLofs; - AdslPerfPrevDayCount adslAturPerfPrev1DayLoss; - AdslPerfPrevDayCount adslAturPerfPrev1DayLprs; - AdslPerfPrevDayCount adslAturPerfPrev1DayESs; - u32 flags; -} aturPerfDataEntry; - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -typedef struct aturPerfDataExtEntry - { - int ifIndex; - u32 adslAturPerfStatSesL; - u32 adslAturPerfStatUasL; - u32 adslAturPerfCurr15MinSesL; - u32 adslAturPerfCurr15MinUasL; - u32 adslAturPerfCurr1DaySesL; - u32 adslAturPerfCurr1DayUasL; - u32 adslAturPerfPrev1DaySesL; - u32 adslAturPerfPrev1DayUasL; - u32 flags; -} aturPerfDataExtEntry; -#endif -//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo) - -typedef struct adslAtucIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount intervalLOF; - PerfIntervalCount intervalLOS; - PerfIntervalCount intervalES; - PerfIntervalCount intervalInits; - int intervalValidData; - u8 flags; -} adslAtucIntvlInfo; - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -typedef struct adslAtucInvtlExtInfo - { - int ifIndex; - int IntervalNumber; - u32 adslAtucIntervalFastR; - u32 adslAtucIntervalFailedFastR; - u32 adslAtucIntervalSesL; - u32 adslAtucIntervalUasL; - u32 flags; -} adslAtucInvtlExtInfo; -#endif -//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo) - -typedef struct adslAturIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount intervalLOF; - PerfIntervalCount intervalLOS; - PerfIntervalCount intervalLPR; - PerfIntervalCount intervalES; - int intervalValidData; - u8 flags; -} adslAturIntvlInfo; - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -typedef struct adslAturInvtlExtInfo - { - int ifIndex; - int IntervalNumber; - u32 adslAturIntervalSesL; - u32 adslAturIntervalUasL; - u32 flags; -} adslAturInvtlExtInfo; -#endif -//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry) - -typedef struct atucChannelPerfDataEntry -{ - int ifIndex; - u32 adslAtucChanReceivedBlks; - u32 adslAtucChanTransmittedBlks; - u32 adslAtucChanCorrectedBlks; - u32 adslAtucChanUncorrectBlks; - int adslAtucChanPerfValidIntervals; - int adslAtucChanPerfInvalidIntervals; - AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks; - AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks; - int adslAtucChanPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks; - u32 flags; -}atucChannelPerfDataEntry; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry) - -typedef struct aturChannelPerfDataEntry -{ - int ifIndex; - u32 adslAturChanReceivedBlks; - u32 adslAturChanTransmittedBlks; - u32 adslAturChanCorrectedBlks; - u32 adslAturChanUncorrectBlks; - int adslAturChanPerfValidIntervals; - int adslAturChanPerfInvalidIntervals; - AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks; - AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks; - int adslAturChanPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks; - u32 flags; -} aturChannelPerfDataEntry; - - -//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo) - -typedef struct adslAtucChanIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount chanIntervalRecvdBlks; - PerfIntervalCount chanIntervalXmitBlks; - PerfIntervalCount chanIntervalCorrectedBlks; - PerfIntervalCount chanIntervalUncorrectBlks; - int intervalValidData; - u8 flags; -} adslAtucChanIntvlInfo; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo) - -typedef struct adslAturChanIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount chanIntervalRecvdBlks; - PerfIntervalCount chanIntervalXmitBlks; - PerfIntervalCount chanIntervalCorrectedBlks; - PerfIntervalCount chanIntervalUncorrectBlks; - int intervalValidData; - u8 flags; -} adslAturChanIntvlInfo; - - -//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) -//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) - -typedef struct adslLineAlarmConfProfileEntry - { - unsigned char adslLineAlarmConfProfileName[32]; - int adslAtucThresh15MinLofs; - int adslAtucThresh15MinLoss; - int adslAtucThresh15MinESs; - u32 adslAtucThreshFastRateUp; - u32 adslAtucThreshInterleaveRateUp; - u32 adslAtucThreshFastRateDown; - u32 adslAtucThreshInterleaveRateDown; - int adslAtucInitFailureTrapEnable; - int adslAturThresh15MinLofs; - int adslAturThresh15MinLoss; - int adslAturThresh15MinLprs; - int adslAturThresh15MinESs; - u32 adslAturThreshFastRateUp; - u32 adslAturThreshInterleaveRateUp; - u32 adslAturThreshFastRateDown; - u32 adslAturThreshInterleaveRateDown; - int adslLineAlarmConfProfileRowStatus; - u32 flags; -} adslLineAlarmConfProfileEntry; - -#ifdef IFXMIPS_MEI_MIB_RFC3440 -typedef struct adslLineAlarmConfProfileExtEntry - { - u8 adslLineAlarmConfProfileExtName[32]; - u32 adslAtucThreshold15MinFailedFastR; - u32 adslAtucThreshold15MinSesL; - u32 adslAtucThreshold15MinUasL; - u32 adslAturThreshold15MinSesL; - u32 adslAturThreshold15MinUasL; - u32 flags; -} adslLineAlarmConfProfileExtEntry; -#endif -//TRAPS - -/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */ -typedef struct adslLineStatus - { - int adslModemStatus; - u32 adslModeSelected; - int adslAtucThresh15MinESs; - int adslTrellisCodeEnable; - int adslLatency; - u8 flags; - } adslLineStatusInfo; - -typedef struct adslLineRate - { - u32 adslDataRateds; - u32 adslDataRateus; - u32 adslATTNDRds; - u32 adslATTNDRus; - u8 flags; - } adslLineRateInfo; - -typedef struct adslLineInfo - { - u32 adslInterleaveDepthds; - u32 adslInterleaveDepthus; - u32 adslLATNds; - u32 adslLATNus; - u32 adslSATNds; - u32 adslSATNus; - int adslSNRMds; - int adslSNRMus; - int adslACATPds; - int adslACATPus; - u32 flags; - } adslLineInfo; - -typedef struct adslNearEndPerfStats - { - u32 adslSuperFrames; - u32 adslneLOS; - u32 adslneLOF; - u32 adslneLPR; - u32 adslneNCD; - u32 adslneLCD; - u32 adslneCRC; - u32 adslneRSCorr; - u32 adslneFECS; - u32 adslneES; - u32 adslneSES; - u32 adslneLOSS; - u32 adslneUAS; - u32 adslneHECErrors; - u32 flags; - } adslNearEndPerfStats; - -typedef struct adslFarEndPerfStats - { - u32 adslfeLOS; - u32 adslfeLOF; - u32 adslfeLPR; - u32 adslfeNCD; - u32 adslfeLCD; - u32 adslfeCRC; - u32 adslfeRSCorr; - u32 adslfeFECS; - u32 adslfeES; - u32 adslfeSES; - u32 adslfeLOSS; - u32 adslfeUAS; - u32 adslfeHECErrors; - u32 flags; - } adslFarEndPerfStats; - -/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */ -typedef struct adslATURSubcarrierInfo { - int ifindex; - u16 HLINSCds; - u16 HLINpsds[1024];/* Even index = real part; Odd Index - = imaginary part for each tone */ - u16 HLOGMTds; - u16 HLOGpsds[512]; - u16 QLNMTds; - u16 QLNpsds[512]; - u16 SNRMTds; - u16 SNRpsds[512]; - u16 BITpsds[512]; - s16 GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10. - Needs to be converted into linear scale*/ - u16 flags; -}adslATURSubcarrierInfo; - -typedef struct adslATUCSubcarrierInfo { - int ifindex; - u16 HLINSCus; - u16 HLINpsus[128];/* Even index = real part; Odd Index - = imaginary part for each tone */ - u16 HLOGMTus; - u16 HLOGpsus[64]; - u16 QLNMTus; - u16 QLNpsus[64]; - u16 SNRMTus; - u16 SNRpsus[64]; - u16 BITpsus[64]; - s16 GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10. - Needs to be converted into linear scale*/ - u16 flags; -}adslATUCSubcarrierInfo; - -#ifndef u_int16 -#define u_int16 u16 -#endif - -typedef struct adslInitStats { - u_int16 FullInitializationCount; - u_int16 FailedFullInitializationCount; - u_int16 LINIT_Errors; - u_int16 Init_Timeouts; -}adslInitStats; - -typedef struct adslPowerSpectralDensity { - int ACTPSDds; - int ACTPSDus; -}adslPowerSpectralDensity; - -//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags) -typedef union structpts { - adslLineTableEntry * adslLineTableEntry_pt; - adslAtucPhysEntry * adslAtucPhysEntry_pt; - adslAturPhysEntry * adslAturPhysEntry_pt; - adslAtucChanInfo * adslAtucChanInfo_pt; - adslAturChanInfo * adslAturChanInfo_pt; - atucPerfDataEntry * atucPerfDataEntry_pt; - aturPerfDataEntry * aturPerfDataEntry_pt; - adslAtucIntvlInfo * adslAtucIntvlInfo_pt; - adslAturIntvlInfo * adslAturIntvlInfo_pt; - atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt; - aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt; - adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt; - adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt; - adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt; - // RFC 3440 - - #ifdef IFXMIPS_MEI_MIB_RFC3440 - adslLineExtTableEntry * adslLineExtTableEntry_pt; - atucPerfDataExtEntry * atucPerfDataExtEntry_pt; - adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt; - aturPerfDataExtEntry * aturPerfDataExtEntry_pt; - adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt; - adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt; - #endif - adslLineStatusInfo * adslLineStatusInfo_pt; - adslLineRateInfo * adslLineRateInfo_pt; - adslLineInfo * adslLineInfo_pt; - adslNearEndPerfStats * adslNearEndPerfStats_pt; - adslFarEndPerfStats * adslFarEndPerfStats_pt; - adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt; - adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt; - adslPowerSpectralDensity * adslPowerSpectralDensity_pt; -}structpts; - -#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */ diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h deleted file mode 100644 index c34662013c..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h +++ /dev/null @@ -1,308 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : ifxmips_mei_bsp.h -** PROJECT : Danube -** MODULES : MEI -** -** DATE : 1 Jan 2006 -** AUTHOR : TC Chen -** DESCRIPTION : MEI Driver -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Version $Date $Author $Comment -*******************************************************************************/ -#ifndef _IFXMIPS_MEI_BSP_H_ -#define _IFXMIPS_MEI_BSP_H_ - -/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ -#define MEI_DATA_XFR_OFFSET (0x0000) -#define MEI_VERSION_OFFSET (0x0004) -#define MEI_ARC_GP_STAT_OFFSET (0x0008) -#define MEI_DATA_XFR_STAT_OFFSET (0x000C) -#define MEI_XFR_ADDR_OFFSET (0x0010) -#define MEI_MAX_WAIT_OFFSET (0x0014) -#define MEI_TO_ARC_INT_OFFSET (0x0018) -#define ARC_TO_MEI_INT_OFFSET (0x001C) -#define ARC_TO_MEI_INT_MASK_OFFSET (0x0020) -#define MEI_DEBUG_WAD_OFFSET (0x0024) -#define MEI_DEBUG_RAD_OFFSET (0x0028) -#define MEI_DEBUG_DATA_OFFSET (0x002C) -#define MEI_DEBUG_DEC_OFFSET (0x0030) -#define MEI_CONFIG_OFFSET (0x0034) -#define MEI_RST_CONTROL_OFFSET (0x0038) -#define MEI_DBG_MASTER_OFFSET (0x003C) -#define MEI_CLK_CONTROL_OFFSET (0x0040) -#define MEI_BIST_CONTROL_OFFSET (0x0044) -#define MEI_BIST_STAT_OFFSET (0x0048) -#define MEI_XDATA_BASE_SH_OFFSET (0x004c) -#define MEI_XDATA_BASE_OFFSET (0x0050) -#define MEI_XMEM_BAR_BASE_OFFSET (0x0054) -#define MEI_XMEM_BAR0_OFFSET (0x0054) -#define MEI_XMEM_BAR1_OFFSET (0x0058) -#define MEI_XMEM_BAR2_OFFSET (0x005C) -#define MEI_XMEM_BAR3_OFFSET (0x0060) -#define MEI_XMEM_BAR4_OFFSET (0x0064) -#define MEI_XMEM_BAR5_OFFSET (0x0068) -#define MEI_XMEM_BAR6_OFFSET (0x006C)) -#define MEI_XMEM_BAR7_OFFSET (0x0070) -#define MEI_XMEM_BAR8_OFFSET (0x0074) -#define MEI_XMEM_BAR9_OFFSET (0x0078) -#define MEI_XMEM_BAR10_OFFSET (0x007C) -#define MEI_XMEM_BAR11_OFFSET (0x0080) -#define MEI_XMEM_BAR12_OFFSET (0x0084) -#define MEI_XMEM_BAR13_OFFSET (0x0088) -#define MEI_XMEM_BAR14_OFFSET (0x008C) -#define MEI_XMEM_BAR15_OFFSET (0x0090) -#define MEI_XMEM_BAR16_OFFSET (0x0094) - -#define WHILE_DELAY 20000 -/* -** Define where in ME Processor's memory map the Stratify chip lives -*/ - -#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) - -// Mailboxes -#define MSG_LENGTH 16 // x16 bits -#define YES_REPLY 1 -#define NO_REPLY 0 - -#define CMV_TIMEOUT 1000 //jiffies - -// Block size per BAR -#define SDRAM_SEGMENT_SIZE (64*1024) -// Number of Bar registers -#define MAX_BAR_REGISTERS (17) - -#define XDATA_REGISTER (15) - -#define IFXMIPS_MEI_IOCTL_CMV_WINHOST IFX_ADSL_IOC_CMV_WINHOST - -#define IFXMIPS_MEI_IOCTL_CMV_READ IFX_ADSL_IOC_CMV_READ -#define IFXMIPS_MEI_IOCTL_CMV_WRITE IFX_ADSL_IOC_CMV_WRITE - -#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS IFX_ADSL_IOC_GET_BASE_ADDRESS - -// ARC register addresss -#define ARC_STATUS 0x0 -#define ARC_LP_START 0x2 -#define ARC_LP_END 0x3 -#define ARC_DEBUG 0x5 -#define ARC_INT_MASK 0x10A - -#define IRAM0_BASE (0x00000) -#define IRAM1_BASE (0x04000) -#define BRAM_BASE (0x0A000) - -#define ADSL_BASE (0x20000) -#define CRI_BASE (ADSL_BASE + 0x11F00) -#define CRI_CCR0 (CRI_BASE + 0x00) -#define CRI_RST (CRI_BASE + 0x04*4) -#define ADSL_DILV_BASE (ADSL_BASE+0x20000) - -// -#define IRAM0_ADDR_BIT_MASK 0xFFF -#define IRAM1_ADDR_BIT_MASK 0xFFF -#define BRAM_ADDR_BIT_MASK 0xFFF -#define RX_DILV_ADDR_BIT_MASK 0x1FFF - -/*** Bit definitions ***/ - -#define FALSE 0 -#define TRUE 1 -#define BIT0 1<<0 -#define BIT1 1<<1 -#define BIT2 1<<2 -#define BIT3 1<<3 -#define BIT4 1<<4 -#define BIT5 1<<5 -#define BIT6 1<<6 -#define BIT7 1<<7 -#define BIT8 1<<8 -#define BIT9 1<<9 -#define BIT10 1<<10 -#define BIT11 1<<11 -#define BIT12 1<<12 -#define BIT13 1<<13 -#define BIT14 1<<14 -#define BIT15 1<<15 -#define BIT16 1<<16 -#define BIT17 1<<17 -#define BIT18 1<<18 -#define BIT19 1<<19 -#define BIT20 1<<20 -#define BIT21 1<<21 -#define BIT22 1<<22 -#define BIT23 1<<23 -#define BIT24 1<<24 -#define BIT25 1<<25 -#define BIT26 1<<26 -#define BIT27 1<<27 -#define BIT28 1<<28 -#define BIT29 1<<29 -#define BIT30 1<<30 -#define BIT31 1<<31 - -// CRI_CCR0 Register definitions -#define CLK_2M_MODE_ENABLE BIT6 -#define ACL_CLK_MODE_ENABLE BIT4 -#define FDF_CLK_MODE_ENABLE BIT2 -#define STM_CLK_MODE_ENABLE BIT0 - -// CRI_RST Register definitions -#define FDF_SRST BIT3 -#define MTE_SRST BIT2 -#define FCI_SRST BIT1 -#define AAI_SRST BIT0 - -// MEI_TO_ARC_INTERRUPT Register definitions -#define MEI_TO_ARC_INT1 BIT3 -#define MEI_TO_ARC_INT0 BIT2 -#define MEI_TO_ARC_CS_DONE BIT1 //need to check -#define MEI_TO_ARC_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT Register definitions -#define ARC_TO_MEI_INT1 BIT8 -#define ARC_TO_MEI_INT0 BIT7 -#define ARC_TO_MEI_CS_REQ BIT6 -#define ARC_TO_MEI_DBG_DONE BIT5 -#define ARC_TO_MEI_MSGACK BIT4 -#define ARC_TO_MEI_NO_ACCESS BIT3 -#define ARC_TO_MEI_CHECK_AAITX BIT2 -#define ARC_TO_MEI_CHECK_AAIRX BIT1 -#define ARC_TO_MEI_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT_MASK Register definitions -#define GP_INT1_EN BIT8 -#define GP_INT0_EN BIT7 -#define CS_REQ_EN BIT6 -#define DBG_DONE_EN BIT5 -#define MSGACK_EN BIT4 -#define NO_ACC_EN BIT3 -#define AAITX_EN BIT2 -#define AAIRX_EN BIT1 -#define MSGAV_EN BIT0 - -#define MEI_SOFT_RESET BIT0 - -#define HOST_MSTR BIT0 - -#define JTAG_MASTER_MODE 0x0 -#define MEI_MASTER_MODE HOST_MSTR - -// MEI_DEBUG_DECODE Register definitions -#define MEI_DEBUG_DEC_MASK (0x3) -#define MEI_DEBUG_DEC_AUX_MASK (0x0) -#define MEI_DEBUG_DEC_DMP1_MASK (0x1) -#define MEI_DEBUG_DEC_DMP2_MASK (0x2) -#define MEI_DEBUG_DEC_CORE_MASK (0x3) - -#define AUX_STATUS (0x0) -// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate -// page swap requests. -#define MEI_TO_ARC_MAILBOX (0xDFD0) -#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C) - -#define ARC_TO_MEI_MAILBOX (0xDFA0) -#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C) - -// Codeswap request messages are indicated by setting BIT31 -#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) - -// Clear Eoc messages received are indicated by setting BIT17 -#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000) - -/* -** Swap page header -*/ -// Page must be loaded at boot time if size field has BIT31 set -#define BOOT_FLAG (BIT31) -#define BOOT_FLAG_MASK ~BOOT_FLAG - -#define FREE_RELOAD 1 -#define FREE_SHOWTIME 2 -#define FREE_ALL 3 - -// marcos -#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0) -#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) -#define SET_BIT(reg, mask) reg |= (mask) -#define CLEAR_BIT(reg, mask) reg &= (~mask) -#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) -#define SET_BITS(reg, mask) SET_BIT(reg, mask) -#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} - -#define ALIGN_SIZE ( 1L<<10 ) //1K size align -#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) ) - -// swap marco -#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);} -#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);} - -// Swap page header describes size in 32-bit words, load location, and image offset -// for program and/or data segments -typedef struct _arc_swp_page_hdr { - u32 p_offset; //Offset bytes of progseg from beginning of image - u32 p_dest; //Destination addr of progseg on processor - u32 p_size; //Size in 32-bitwords of program segment - u32 d_offset; //Offset bytes of dataseg from beginning of image - u32 d_dest; //Destination addr of dataseg on processor - u32 d_size; //Size in 32-bitwords of data segment -} ARC_SWP_PAGE_HDR; - -/* -** Swap image header -*/ -#define GET_PROG 0 // Flag used for program mem segment -#define GET_DATA 1 // Flag used for data mem segment - -// Image header contains size of image, checksum for image, and count of -// page headers. Following that are 'count' page headers followed by -// the code and/or data segments to be loaded -typedef struct _arc_img_hdr { - u32 size; // Size of binary image in bytes - u32 checksum; // Checksum for image - u32 count; // Count of swp pages in image - ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy -} ARC_IMG_HDR; - -typedef struct smmu_mem_info { - int type; - unsigned long nCopy; - unsigned long size; - unsigned char *address; - unsigned char *org_address; -} smmu_mem_info_t; - -typedef struct ifxmips_mei_device_private { - int modem_ready; - int arcmsgav; - int cmv_reply; - int cmv_waiting; - // Mei to ARC CMV count, reply count, ARC Indicator count - int indicator_count; - int cmv_count; - int reply_count; - unsigned long image_size; - int nBar; - u16 Recent_indicator[MSG_LENGTH]; - - u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4))); - - smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS]; - ARC_IMG_HDR *img_hdr; - // to wait for arc cmv reply, sleep on wait_queue_arcmsgav; - wait_queue_head_t wait_queue_arcmsgav; - wait_queue_head_t wait_queue_modemready; - MEI_mutex_t mei_cmv_sema; -} ifxmips_mei_device_private_t; - -#endif //_IFXMIPS_MEI_BSP_H_ diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h deleted file mode 100644 index d11f04ea97..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h +++ /dev/null @@ -1,734 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : ifxmips_mei_ioctl.h -** PROJECT : Danube -** MODULES : MEI -** -** DATE : 1 Jan 2006 -** AUTHOR : TC Chen -** DESCRIPTION : MEI Driver -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Version $Date $Author $Comment -*******************************************************************************/ -#ifndef _IFXMIPS_MEI_IOCTL_H -#define _IFXMIPS_MEI_IOCTL_H - -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define PCM_BUFF_SIZE 1024 //bytes -// interrupt numbers - -#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP)) - -// Number of intervals -#define INTERVAL_NUM 192 //two days -typedef struct ifxmips_mei_mib { - struct list_head list; - struct timeval start_time; //start of current interval - - int AtucPerfLof; - int AtucPerfLos; - int AtucPerfEs; - int AtucPerfInit; - - int AturPerfLof; - int AturPerfLos; - int AturPerfLpr; - int AturPerfEs; - - int AturChanPerfRxBlk; - int AturChanPerfTxBlk; - int AturChanPerfCorrBlk; - int AturChanPerfUncorrBlk; - - //RFC-3440 - int AtucPerfStatFastR; - int AtucPerfStatFailedFastR; - int AtucPerfStatSesL; - int AtucPerfStatUasL; - int AturPerfStatSesL; - int AturPerfStatUasL; -} ifxmips_mei_mib; - -typedef struct adslChanPrevTxRate { - u32 adslAtucChanPrevTxRate; - u32 adslAturChanPrevTxRate; -} adslChanPrevTxRate; - -typedef struct adslPhysCurrStatus { - u32 adslAtucCurrStatus; - u32 adslAturCurrStatus; -} adslPhysCurrStatus; - -typedef struct ChanType { - int interleave; - int fast; - int bearchannel0; - int bearchannel1; -} ChanType; - -typedef struct mib_previous_read { - u16 ATUC_PERF_ESS; - u16 ATUR_PERF_ESS; - u32 ATUR_CHAN_RECV_BLK; - u16 ATUR_CHAN_CORR_BLK_INTL; - u16 ATUR_CHAN_CORR_BLK_FAST; - u16 ATUR_CHAN_UNCORR_BLK_INTL; - u16 ATUR_CHAN_UNCORR_BLK_FAST; - u16 ATUC_PERF_STAT_FASTR; - u16 ATUC_PERF_STAT_FAILED_FASTR; - u16 ATUC_PERF_STAT_SESL; - u16 ATUC_PERF_STAT_UASL; - u16 ATUR_PERF_STAT_SESL; -} mib_previous_read; - -typedef struct mib_flags_pretime { - struct timeval ATUC_PERF_LOSS_PTIME; - struct timeval ATUC_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LOSS_PTIME; - struct timeval ATUR_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LPR_PTIME; -} mib_flags_pretime; - - // cmv message structures -#define MP_PAYLOAD_SIZE 12 -typedef struct mpmessage { - u16 iFunction; - u16 iGroup; - u16 iAddress; - u16 iIndex; - u16 iPayload[MP_PAYLOAD_SIZE]; -} MPMessage; -#endif - -typedef struct meireg { - u32 iAddress; - u32 iData; -} meireg; - -#define MEIDEBUG_BUFFER_SIZES 50 -typedef struct meidebug { - u32 iAddress; - u32 iCount; - u32 buffer[MEIDEBUG_BUFFER_SIZES]; -} meidebug; - -//============================================================================== -// Group definitions -//============================================================================== -#define OPTN 5 -#define CNFG 8 -#define CNTL 1 -#define STAT 2 -#define RATE 6 -#define PLAM 7 -#define INFO 3 -#define TEST 4 -//============================================================================== -// Opcode definitions -//============================================================================== -#define H2D_CMV_READ 0x00 -#define H2D_CMV_WRITE 0x04 -#define H2D_CMV_INDICATE_REPLY 0x10 -#define H2D_ERROR_OPCODE_UNKNOWN 0x20 -#define H2D_ERROR_CMV_UNKNOWN 0x30 - -#define D2H_CMV_READ_REPLY 0x01 -#define D2H_CMV_WRITE_REPLY 0x05 -#define D2H_CMV_INDICATE 0x11 -#define D2H_ERROR_OPCODE_UNKNOWN 0x21 -#define D2H_ERROR_CMV_UNKNOWN 0x31 -#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41 -#define D2H_ERROR_CMV_WRITE_ONLY 0x51 -#define D2H_ERROR_CMV_READ_ONLY 0x61 - -#define H2D_DEBUG_READ_DM 0x02 -#define H2D_DEBUG_READ_PM 0x06 -#define H2D_DEBUG_WRITE_DM 0x0a -#define H2D_DEBUG_WRITE_PM 0x0e - -#define D2H_DEBUG_READ_DM_REPLY 0x03 -#define D2H_DEBUG_READ_FM_REPLY 0x07 -#define D2H_DEBUG_WRITE_DM_REPLY 0x0b -#define D2H_DEBUG_WRITE_FM_REPLY 0x0f -#define D2H_ERROR_ADDR_UNKNOWN 0x33 - -#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1 -//============================================================================== -// INFO register address field definitions -//============================================================================== - -#define INFO_TxState 0 -#define INFO_RxState 1 -#define INFO_TxNextState 2 -#define INFO_RxNextState 3 -#define INFO_TxStateJumpFrom 4 -#define INFO_RxStateJumpFrom 5 - -#define INFO_ReverbSnrBuf 8 -#define INFO_ReverbEchoSnrBuf 9 -#define INFO_MedleySnrBuf 10 -#define INFO_RxShowtimeSnrBuf 11 -#define INFO_DECdelay 12 -#define INFO_DECExponent 13 -#define INFO_DECTaps 14 -#define INFO_AECdelay 15 -#define INFO_AECExponent 16 -#define INFO_AECTaps 17 -#define INFO_TDQExponent 18 -#define INFO_TDQTaps 19 -#define INFO_FDQExponent 20 -#define INFO_FDQTaps 21 -#define INFO_USBat 22 -#define INFO_DSBat 23 -#define INFO_USFineGains 24 -#define INFO_DSFineGains 25 -#define INFO_BitloadFirstChannel 26 -#define INFO_BitloadLastChannel 27 -#define INFO_PollEOCData 28 // CO specific -#define INFO_CSNRMargin 29 // CO specific -#define INFO_RCMsgs1 30 -#define INFO_RMsgs1 31 -#define INFO_RMsgRA 32 -#define INFO_RCMsgRA 33 -#define INFO_RMsg2 34 -#define INFO_RCMsg2 35 -#define INFO_BitLoadOK 36 -#define INFO_RCRates1 37 -#define INFO_RRates1Tab 38 -#define INFO_RMsgs1Tab 39 -#define INFO_RMsgRATab 40 -#define INFO_RRatesRA 41 -#define INFO_RCRatesRA 42 -#define INFO_RRates2 43 -#define INFO_RCRates2 44 -#define INFO_PackedRMsg2 45 -#define INFO_RxBitSwapFlag 46 -#define INFO_TxBitSwapFlag 47 -#define INFO_ShowtimeSNRUpdateCount 48 -#define INFO_ShowtimeFDQUpdateCount 49 -#define INFO_ShowtimeDECUpdateCount 50 -#define INFO_CopyRxBuffer 51 -#define INFO_RxToneBuf 52 -#define INFO_TxToneBuf 53 -#define INFO_Version 54 -#define INFO_TimeStamp 55 -#define INFO_feVendorID 56 -#define INFO_feSerialNum 57 -#define INFO_feVersionNum 58 -#define INFO_BulkMemory 59 //Points to start of bulk memory -#define INFO_neVendorID 60 -#define INFO_neVersionNum 61 -#define INFO_neSerialNum 62 - -//============================================================================== -// RATE register address field definitions -//============================================================================== - -#define RATE_UsRate 0 -#define RATE_DsRate 1 - -//============================================================================== -// PLAM (Physical Layer Management) register address field definitions -// (See G997.1 for reference) -//============================================================================== - - // /// - // Failure Flags /// - // /// - -#define PLAM_NearEndFailureFlags 0 -#define PLAM_FarEndFailureFlags 1 - - // /// - // Near End Failure Flags Bit Definitions /// - // /// - -// ADSL Failures /// -#define PLAM_LOS_FailureBit 0x0001 -#define PLAM_LOF_FailureBit 0x0002 -#define PLAM_LPR_FailureBit 0x0004 -#define PLAM_RFI_FailureBit 0x0008 - -// ATM Failures /// -#define PLAM_NCD_LP0_FailureBit 0x0010 -#define PLAM_NCD_LP1_FailureBit 0x0020 -#define PLAM_LCD_LP0_FailureBit 0x0040 -#define PLAM_LCD_LP1_FailureBit 0x0080 - -#define PLAM_NCD_BC0_FailureBit 0x0100 -#define PLAM_NCD_BC1_FailureBit 0x0200 -#define PLAM_LCD_BC0_FailureBit 0x0400 -#define PLAM_LCD_BC1_FailureBit 0x0800 - // /// - // Performance Counts /// - // /// - -#define PLAM_NearEndCrcCnt 2 -#define PLAM_CorrectedRSErrors 3 - -#define PLAM_NearEndECSCnt 6 -#define PLAM_NearEndESCnt 7 -#define PLAM_NearEndSESCnt 8 -#define PLAM_NearEndLOSSCnt 9 -#define PLAM_NearEndUASLCnt 10 - -#define PLAM_NearEndHECErrCnt 11 - -#define PLAM_NearEndHECTotCnt 16 -#define PLAM_NearEndCellTotCnt 18 -#define PLAM_NearEndSfCntLSW 20 -#define PLAM_NearEndSfCntMSW 21 - -#define PLAM_FarEndFebeCnt 24 - -#define PLAM_FarEndFecCnt 28 - -#define PLAM_FarEndFECSCnt 32 -#define PLAM_FarEndESCnt 33 -#define PLAM_FarEndSESCnt 34 -#define PLAM_FarEndLOSSCnt 35 -#define PLAM_FarEndUASLCnt 36 - -#define PLAM_FarEndHECErrCnt 37 - -#define PLAM_FarEndHECTotCnt 41 - -#define PLAM_FarEndCellTotCnt 43 - -#define PLAM_SNRMargin_0_1db 45 - -#define PLAM_SNRMargin 46 - -//============================================================================== -// CNTL register address and bit field definitions -//============================================================================== - -#define CNTL_ModemControl 0 - -#define CNTL_ModemReset 0x0 -#define CNTL_ModemStart 0x2 - -//============================================================================== -// STAT register address and bit field definitions -//============================================================================== - -#define STAT_MacroState 0 -#define STAT_Mode 1 -#define STAT_DMTFramingMode 2 -#define STAT_SleepState 3 -#define STAT_Misc 4 -#define STAT_FailureState 5 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - //16-bit STAT_OLRStatus_DS - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits). - // [11]: 1=Receive Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRStatus_DS 6 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - // 16-bit STAT_OLRStatus_US CMV - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [8]: 1=Request Received. 0=not. - // [10:9]: Reserved - // [11]: 1=Response Sent, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -/// -#define STAT_OLRStatus_US 7 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_PMStatus provides status of PM - // 16-bit STAT_PMStatus CMV - // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted - // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM - // [3]: Reserved - // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits). - // [11]: 1=Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_PMStatus 8 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError - // [3:0]: OLR/PM response reason code - // [7:4]: OLR/PM Internal error code - // [15:8]: OLR/PM Reserved for future - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRError_DS 9 -#define STAT_OLRError_US 10 -#define STAT_PMError 11 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_MacroState -// MacroState reflects the high level state of the modem - -#define STAT_InitState 0x0000 -#define STAT_ReadyState 0x0001 -#define STAT_FailState 0x0002 -#define STAT_IdleState 0x0003 -#define STAT_QuietState 0x0004 -#define STAT_GhsState 0x0005 -#define STAT_FullInitState 0x0006 -#define STAT_ShowTimeState 0x0007 -#define STAT_FastRetrainState 0x0008 -#define STAT_LoopDiagMode 0x0009 -#define STAT_ShortInit 0x000A // Bis short initialization /// - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Mode -// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use -// G.Hs or some other mechanism to negotiate the specific mode of operation. -// The OPTN_modeControl CMV is used to select a set of desired modes. -// The STAT_Mode CMV indicates which mode was actually selected. - -#define STAT_ConfigMode_T1413 0x0001 -#define STAT_ConfigMode_G992_2_AB 0x0002 -#define STAT_ConfigMode_G992_1_A 0x0004 -#define STAT_ConfigMode_G992_1_B 0x0008 -#define STAT_ConfigMode_G992_1_C 0x0010 -#define STAT_ConfigMode_G992_2_C 0x0020 - -#define STAT_ConfigMode_G992_3_A 0x0100 -#define STAT_ConfigMode_G992_3_B 0x0200 -#define STAT_ConfigMode_G992_3_I 0x0400 -#define STAT_ConfigMode_G992_3_J 0x0800 -#define STAT_ConfigMode_G992_3_L 0x1000 - -#define STAT_ConfigMode_G992_4_A 0x2000 -#define STAT_ConfigMode_G992_4_I 0x4000 - -#define STAT_ConfigMode_G992_5 0x8000 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_DMTFramingMode -// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode -// status is not applicable in BIS mode and its value is undefined -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_FramingModeMask 0x0003 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Misc -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OverlappedSpectrum 0x0008 -#define STAT_TCM 0x0010 -#define STAT_TDQ_at_1104 0x0020 -#define STAT_T1413_Signal_Detected 0x0040 -#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1 -#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_FailureState -// when the MacroSTate indicates the fail state, FailureState provides a failure code -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define E_CODE_NO_ERROR 0 -#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */ -#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */ -#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */ -#define E_CODE_TX_AOC_FIFO_OVERFLOW 4 -#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/ -#define E_CODE_BITLOAD 6 // bit loading fails */ -#define E_CODE_ST_ERROR 7 // showtime CRC error */ -#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */ -#define E_CODE_C_TONES 9 // detected C_TONES */ -#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */ -#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */ -#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */ -#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */ -#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */ -#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */ -#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */ -#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */ -#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */ -#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */ -#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */ -#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */ -#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */ -#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */ -#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */ -#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */ -#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */ -#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */ -#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */ -#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */ -#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */ -#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */ -#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */ -#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */ -#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */ -#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */ -#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */ -#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */ -#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */ -#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */ -#define E_CODE_BAD_MEM_ACCESS 46 -#define E_CODE_BAD_INSTRUCTION_ACCESS 47 -#define E_CODE_TX_EOC_FIFO_OVERFLOW 48 -#define E_CODE_RX_EOC_FIFO_OVERFLOW 49 -#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */ - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//STAT_OLRStatus: -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OLRPM_IDLE 0x0000 -#define STAT_OLRPM_IN_PROGRESS 0x0001 -#define STAT_OLRPM_COMPLETE 0x0002 -#define STAT_OLRPM_ABORTED 0x0003 -#define STAT_OLRPM_RESPONSE 0x0800 - -#define STAT_OLR_BITSWAP 0x0010 -#define STAT_OLR_DRR 0x0020 -#define STAT_OLR_SRA 0x0030 - -//STAT_PMStatus_US: -#define STAT_PM_CO_REQ 0x0004 -#define STAT_PM_SIMPLE_REQ 0x0010 -#define STAT_PM_L2_REQ 0x0020 -#define STAT_PM_L2_TRIM_REQ 0x0030 - -// STAT_OLRError_DS, STAT_OLRError_US -//4 bit response reason code: -#define RESP_BUSY 0x01 -#define RESP_INVALID_PARAMETERS 0x02 -#define RESP_NOT_ENABLED 0x03 -#define RESP_NOT_SUPPORTED 0x04 - -//4 bit internal error code (common for OLR and PM) -#define REQ_INVALID_BiGi 0x10 -#define REQ_INVALID_Lp 0x20 -#define REQ_INVALID_Bpn 0x30 -#define REQ_INVALID_FRAMING_CONSTRAINT 0x40 -#define REQ_NOT_IN_L0_STATE 0x50 -#define REQ_NOT_IN_L2_STATE 0x60 -#define REQ_INVALID_PCB 0x70 -#define REQ_VIOLATES_MARGIN 0x80 - -//STAT_PMError -//4 bit response reason code: -#define RESP_STATE_NOT_DESIRED 0x03 -#define RESP_INFEASIBLE_PARAMETERS 0x04 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN register address and bit field definitions -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_ModeControl 0 -#define OPTN_DMTLnkCtl 1 -// Reserved 2 -#define OPTN_GhsControl 3 -// Reserved 4 -#define OPTN_PwrManControl 5 -#define OPTN_AnnexControl 6 -#define OPTN_ModeControl1 7 -// Reserved 8 -#define OPTN_StateMachineCtrl 9 -// Reserved 10 -// Reserved 11 -#define OPTN_BisLinkControl 12 -#define OPTN_ATMAddrConfig 13 -#define OPTN_ATMNumCellConfig 14 - -// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may /// -// use G.Hs or some other mechanism to negotiate the specific mode of operation. /// -// The OPTN_ModeControl CMV is used to select a set of desired modes /// -// The STAT_ModeControl CMV indicates which mode was actually selected /// - -// OPTN_ModeControl -#define OPTN_ConfigMode_T1413 0x0001 -#define OPTN_ConfigMode_G992_2_AB 0x0002 -#define OPTN_ConfigMode_G992_1_A 0x0004 -#define OPTN_ConfigMode_G992_1_B 0x0008 -#define OPTN_ConfigMode_G992_1_C 0x0010 -#define OPTN_ConfigMode_G992_2_C 0x0020 - -#define OPTN_ConfigMode_G992_3_A 0x0100 -#define OPTN_ConfigMode_G992_3_B 0x0200 -#define OPTN_ConfigMode_G992_3_I 0x0400 -#define OPTN_ConfigMode_G992_3_J 0x0800 -#define OPTN_ConfigMode_G992_3_L 0x1000 - -#define OPTN_ConfigMode_G992_4_A 0x2000 -#define OPTN_ConfigMode_G992_4_I 0x4000 - -#define OPTN_ConfigMode_G992_5 0x8000 - -// OPTN_PwrManControl -#define OPTN_PwrManWakeUpGhs 0x1 -#define OPTN_PwrManWakeUpFR 0x2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_DMT Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_DMT_DualLatency_Dis 0x200 -#define OPTN_DMT_S_Dis 0x100 -#define OPTN_DMT_FRAMINGMODE 0x1 -#define OPTN_DMT_FRAMINGMODE_MASK 0x7 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_BIS Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_BisLinkContrl_LineProbeDis 0x1 -#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2 -#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_GhsControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// -// for OPTN_GhsControl, we will assign 16bit word as follows -// bit 0~3: set the control over which start(initial) message CPE will send: -// -// BIT: 2 1 0 -// 0 0 1 CLR -// 0 1 0 MR -// 0 1 1 MS -// 1 0 0 MP -// -// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange -// BIT: 5 4 -// 0 1 MS -// 1 0 MR -// 1 1 MP -// -// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default. -// BIT: 15 -// 1 means session one -// -/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_GHS_ST_GHS 0x8000 -#define OPTN_GHS_INIT_MASK 0x000F -#define OPTN_GHS_RESP_MASK 0x00F0 - -#define OPTN_RTInitTxMsg_CLR 0x0001 -#define OPTN_RTInitTxMsg_MR 0x0002 -#define OPTN_RTInitTxMsg_MS 0x0003 -#define OPTN_RTInitTxMsg_MP 0x0004 - -#define OPTN_RTRespTxMsg_MS 0x0010 -#define OPTN_RTRespTxMsg_MR 0x0020 -#define OPTN_RTRespTxMsg_MP 0x0030 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_AnnexControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -// G.992.3 Annex A/L1/L2 US PSD Mask preferred - -#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000 -#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask /// - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMAddrConfig -// Bits 4:0 are Utopia address for BC1 -// Bits 9:5 are Utopia address for BC0 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_UTPADDR_BC1 0x001F -#define OPTN_UTPADDR_BC0 0x03E0 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMNumCellConfig -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 /// -#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 /// - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// CNFG register address field /// -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -/////////////////////////////////////////// -// these cmvs are used by bis handshake /// -/////////////////////////////////////////// - -// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t) -#define CNFG_TPS_TC_DS0 0 -#define CNFG_TPS_TC_DS1 1 -#define CNFG_TPS_TC_US0 2 -#define CNFG_TPS_TC_US1 3 - -#define CNFG_HDLC_Overhead_Requirements 4 - -// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t) -#define CNFG_PMS_TC_DS0 5 -#define CNFG_PMS_TC_DS1 6 -#define CNFG_PMS_TC_US0 7 -#define CNFG_PMS_TC_US1 8 - -// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t) -#define CNFG_PMD_PARAMETERS 9 - -//////////////////////////////////////////////////////////// -// these cmvs are used by bis training and showtime code /// -//////////////////////////////////////////////////////////// - -//////////////// -// Tx Config /// -//////////////// -#define CNFG_tx_Cnfg_Nbc 10 -#define CNFG_tx_Cnfg_Nlp 11 -#define CNFG_tx_Cnfg_Rp 12 -#define CNFG_tx_Cnfg_Mp 13 -#define CNFG_tx_Cnfg_Lp 14 -#define CNFG_tx_Cnfg_Tp 15 -#define CNFG_tx_Cnfg_Dp 16 -#define CNFG_tx_Cnfg_Bpn 17 -#define CNFG_tx_Cnfg_FramingMode 18 -#define CNFG_tx_Cnfg_MSGLp 19 -#define CNFG_tx_Cnfg_MSGc 20 - -//////////////// -// Rx Config /// -//////////////// -#define CNFG_rx_Cnfg_Nbc 21 -#define CNFG_rx_Cnfg_Nlp 22 -#define CNFG_rx_Cnfg_Rp 23 -#define CNFG_rx_Cnfg_Mp 24 -#define CNFG_rx_Cnfg_Lp 25 -#define CNFG_rx_Cnfg_Tp 26 -#define CNFG_rx_Cnfg_Dp 27 -#define CNFG_rx_Cnfg_Bpn 28 -#define CNFG_rx_Cnfg_FramingMode 29 -#define CNFG_rx_Cnfg_MSGLp 30 -#define CNFG_rx_Cnfg_MSGc 31 - -#define CNFG_tx_Cnfg_BCnToLPp 32 -#define CNFG_rx_Cnfg_BCnToLPp 33 - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h deleted file mode 100644 index 79849ae4fb..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h +++ /dev/null @@ -1,112 +0,0 @@ -/****************************************************************************** -** -** FILE NAME : ifxmips_mei_linux.h -** PROJECT : Danube -** MODULES : MEI -** -** DATE : 1 Jan 2006 -** AUTHOR : TC Chen -** DESCRIPTION : MEI Driver -** COPYRIGHT : Copyright (c) 2006 -** Infineon Technologies AG -** Am Campeon 1-12, 85579 Neubiberg, Germany -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** HISTORY -** $Version $Date $Author $Comment -*******************************************************************************/ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#undef CONFIG_DEVFS_FS //165204:henryhsu devfs will make mei open file fail. - -#ifdef CONFIG_DEVFS_FS -#include -#endif -#ifdef CONFIG_PROC_FS -#include -#endif - -#include -#include -#define __LINUX__ - -#ifdef CONFIG_PROC_FS -#define PROC_ITEMS 8 -#define MEI_DIRNAME "mei" -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_DEVFS_FS -#define IFXMIPS_DEVNAME "ifxmips" -#endif //ifdef CONFIG_DEVFS_FS - -#define MEI_LOCKINT(var) \ - local_save_flags(var);\ - local_irq_disable() -#define MEI_UNLOCKINT(var) \ - local_irq_restore(var) - -#define MEI_MUTEX_INIT(id,flag) \ - sema_init(&id,flag) -#define MEI_MUTEX_LOCK(id) \ - down_interruptible(&id) -#define MEI_MUTEX_UNLOCK(id) \ - up(&id) - -#define MEI_MASK_AND_ACK_IRQ \ - ifxmips_mask_and_ack_irq - -#define MEI_DISABLE_IRQ \ - disable_irq -#define MEI_ENABLE_IRQ \ - enable_irq - -#define MEI_WAIT(ms) \ - {\ - set_current_state(TASK_INTERRUPTIBLE);\ - schedule_timeout(ms);\ - } - -#define MEI_INIT_WAKELIST(name,queue) \ - init_waitqueue_head(&queue) - -#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\ - interruptible_sleep_on_timeout(&ev,timeout) - -#define MEI_WAIT_EVENT(ev)\ - interruptible_sleep_on(&ev) -#define MEI_WAKEUP_EVENT(ev)\ - wake_up_interruptible(&ev) - -typedef unsigned long MEI_intstat_t; -typedef struct semaphore MEI_mutex_t; -typedef struct file MEI_file_t; -typedef struct inode MEI_inode_t; - -extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr); diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_pmu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_pmu.h deleted file mode 100644 index c1ba6cbfbe..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_pmu.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin - */ -#ifndef _IFXMIPS_PMU_H__ -#define _IFXMIPS_PMU_H__ - -#define IFXMIPS_PMU_PWDCR_DMA 0x20 -#define IFXMIPS_PMU_PWDCR_LED 0x800 -#define IFXMIPS_PMU_PWDCR_GPT 0x1000 -#define IFXMIPS_PMU_PWDCR_PPE 0x2000 -#define IFXMIPS_PMU_PWDCR_FPI 0x4000 - -void ifxmips_pmu_enable(unsigned int module); -void ifxmips_pmu_disable(unsigned int module); - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_prom.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_prom.h deleted file mode 100644 index e640ad7acc..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_prom.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2008 John Crispin - */ -#ifndef _IFXPROM_H__ -#define _IFXPROM_H__ - -extern void prom_printf(const char *fmt, ...); -extern u32 *prom_get_cp1_base(void); -extern u32 prom_get_cp1_size(void); -extern int ifxmips_has_brn_block(void); - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/gpio.h b/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/gpio.h deleted file mode 100644 index 92adc4848b..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/gpio.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * include/asm-mips/mach-ifxmips/gpio.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin - * - */ - -#ifndef _IFXMIPS_GPIO_H_ -#define _IFXMIPS_GPIO_H_ - -#include -#include - -#define GPIO_TO_PORT(x) ((x > 15) ? (1) : (0)) -#define GPIO_TO_GPIO(x) ((x > 15) ? (x-16) : (x)) - -static inline int gpio_direction_input(unsigned gpio) -{ - ifxmips_port_set_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - ifxmips_port_set_dir_in(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - ifxmips_port_clear_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - ifxmips_port_set_dir_out(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - return 0; -} - -static inline int gpio_get_value(unsigned gpio) -{ - ifxmips_port_get_input(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - return 0; -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (value) - ifxmips_port_set_output(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio)); - else - ifxmips_port_clear_output(GPIO_TO_PORT(gpio), - GPIO_TO_GPIO(gpio)); -} - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return 0; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return 0; -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return 0; -} - -static inline int gpio_get_value_cansleep(unsigned gpio) -{ - might_sleep(); - return gpio_get_value(gpio); -} - -static inline void gpio_set_value_cansleep(unsigned gpio, int value) -{ - might_sleep(); - gpio_set_value(gpio, value); -} - -static inline int gpio_is_valid(int number) -{ - return ((unsigned)number) < 8; -} - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/irq.h b/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/irq.h deleted file mode 100644 index 80342ae3a9..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/irq.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-mips/mach-ifxmips/irq.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2007 John Crispin - * - */ - -#ifndef __IFXMIPS_IRQ_H -#define __IFXMIPS_IRQ_H - -#define NR_IRQS 256 -#include_next - -#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/war.h b/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/war.h deleted file mode 100644 index de3584ecf6..0000000000 --- a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/war.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#ifndef __ASM_MIPS_MACH_IFXMIPS_WAR_H -#define __ASM_MIPS_MACH_IFXMIPS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif diff --git a/target/linux/ifxmips/patches-2.6.27/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches-2.6.27/000-mips-bad-intctl.patch deleted file mode 100644 index 36f0552d4e..0000000000 --- a/target/linux/ifxmips/patches-2.6.27/000-mips-bad-intctl.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -1484,7 +1484,16 @@ void __cpuinit per_cpu_trap_init(void) - */ - if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; -+ if (!cp0_compare_irq) -+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; -+ - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; -+ if (!cp0_perfcount_irq) -+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ; -+ -+ if (arch_fixup_c0_irqs) -+ arch_fixup_c0_irqs(); -+ - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; - } else { ---- a/include/asm-mips/irq.h -+++ b/include/asm-mips/irq.h -@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq) - * IE7. Since R2 their number has to be read from the c0_intctl register. - */ - #define CP0_LEGACY_COMPARE_IRQ 7 -+#define CP0_LEGACY_PERFCNT_IRQ 7 - - extern int cp0_compare_irq; - extern int cp0_perfcount_irq; - -+extern void __weak arch_fixup_c0_irqs(void); -+ -+ - #endif /* _ASM_IRQ_H */ diff --git a/target/linux/ifxmips/patches-2.6.27/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches-2.6.27/010-mips_clocksource_init_war.patch deleted file mode 100644 index ac44c308fa..0000000000 --- a/target/linux/ifxmips/patches-2.6.27/010-mips_clocksource_init_war.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -21,6 +21,22 @@ - - #ifndef CONFIG_MIPS_MT_SMTC - -+/* -+ * Compare interrupt can be routed and latched outside the core, -+ * so a single execution hazard barrier may not be enough to give -+ * it time to clear as seen in the Cause register. 4 time the -+ * pipeline depth seems reasonably conservative, and empirically -+ * works better in configurations with high CPU/bus clock ratios. -+ */ -+ -+#define compare_change_hazard() \ -+ do { \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ } while (0) -+ - static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) - { -@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -+ compare_change_hazard(); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; - return res; - } diff --git a/target/linux/ifxmips/patches-2.6.27/100-board.patch b/target/linux/ifxmips/patches-2.6.27/100-board.patch deleted file mode 100644 index b45c1c466d..0000000000 --- a/target/linux/ifxmips/patches-2.6.27/100-board.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -78,6 +78,23 @@ config MIPS_COBALT - select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - -+config IFXMIPS -+ bool "Infineon Twinpass, Danube, Amazon-SE" -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select CEVT_R4K -+ select CSRC_R4K -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select HAVE_STD_PC_SERIAL_PORT -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_MULTITHREADING -+ select SYS_HAS_EARLY_PRINTK -+ select HW_HAS_PCI -+ select GENERIC_GPIO -+ select SWAP_IO_SPACE -+ - config MACH_DECSTATION - bool "DECstations" - select BOOT_ELF32 -@@ -607,6 +624,7 @@ source "arch/mips/sgi-ip27/Kconfig" - source "arch/mips/sibyte/Kconfig" - source "arch/mips/txx9/Kconfig" - source "arch/mips/vr41xx/Kconfig" -+source "arch/mips/ifxmips/Kconfig" - - endmenu - ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -283,6 +283,13 @@ cflags-$(CONFIG_MIPS_COBALT) += -Iinclud - load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 - - # -+# Infineon IFXMIPS -+# -+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/ -+cflags-$(CONFIG_IFXMIPS) += -Iinclude/asm-mips/mach-ifxmips -+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000 -+ -+# - # DECstation family - # - core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -57,6 +57,12 @@ - #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ - #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ - -+/* -+ * Valid machtype for group IFXMIPS -+ */ -+#define MACH_GROUP_IFXMIPS 29 -+#define MACH_INFINEON_IFXMIPS 0 -+ - #define CL_SIZE COMMAND_LINE_SIZE - - extern char *system_type; ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -51,3 +51,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o - obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o -+obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o diff --git a/target/linux/ifxmips/patches-2.6.27/110-drivers.patch b/target/linux/ifxmips/patches-2.6.27/110-drivers.patch deleted file mode 100644 index 9382c8b399..0000000000 --- a/target/linux/ifxmips/patches-2.6.27/110-drivers.patch +++ /dev/null @@ -1,152 +0,0 @@ ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -112,6 +112,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o - obj-$(CONFIG_JS_RTC) += js-rtc.o - js-rtc-y = rtc.o - -+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o -+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o -+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o -+ - # Files generated that shall be removed upon make clean - clean-files := consolemap_deftbl.c defkeymap.c - ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -56,6 +56,7 @@ obj-$(CONFIG_MTD_WALNUT) += walnu - obj-$(CONFIG_MTD_H720X) += h720x-flash.o - obj-$(CONFIG_MTD_SBC8240) += sbc8240.o - obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o -+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o - obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o - obj-$(CONFIG_MTD_IXP2000) += ixp2000.o - obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -343,6 +343,12 @@ config MACB - - source "drivers/net/arm/Kconfig" - -+config IFXMIPS_MII0 -+ tristate "Infineon IFXMips eth0 driver" -+ depends on IFXMIPS -+ help -+ Support for the MII0 inside the IFXMips SOC -+ - config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS || SUPERH ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -1353,6 +1353,14 @@ config SERIAL_OF_PLATFORM - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -+config SERIAL_IFXMIPS -+ bool "IFXMips serial driver" -+ depends on IFXMIPS -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE -+ help -+ Driver for the ifxmipss built in ASC hardware -+ - config SERIAL_QE - tristate "Freescale QUICC Engine serial port support" - depends on QUICC_ENGINE ---- a/drivers/serial/Makefile -+++ b/drivers/serial/Makefile -@@ -69,3 +69,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s - obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o - obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o - obj-$(CONFIG_SERIAL_QE) += ucc_uart.o -+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o - - # PARISC Architecture - ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/ - obj-$(CONFIG_NIU) += niu.o - obj-$(CONFIG_VIRTIO_NET) += virtio_net.o - obj-$(CONFIG_SFC) += sfc/ -- -+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW - If you say N, all options in this submenu will be skipped and disabled. - - if CRYPTO_HW -+config CRYPTO_DEV_IFXMIPS -+ tristate "Support for IFXMIPS Data Encryption Unit" -+ depends on IFXMIPS - - config CRYPTO_DEV_PADLOCK - tristate "Support for VIA PadLock ACE" ---- a/drivers/crypto/Makefile -+++ b/drivers/crypto/Makefile -@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode- - obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o - obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o - obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o -+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597 - help - This driver enables support for the on-chip R8A66597 in the - SH7366 and SH7723 processors. -+ -+config USB_DWC_HCD -+ tristate "IFXMIPS USB Host Controller Driver" -+ depends on USB && IFXMIPS -+ default y -+ help -+ Danube USB Host Controller ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -169,6 +169,12 @@ config LEDS_PCA955X - LED driver chips accessed via the I2C bus. Supported - devices include PCA9550, PCA9551, PCA9552, and PCA9553. - -+config LEDS_IFXMIPS -+ tristate "LED Support for IFXMIPS LEDs" -+ depends on LEDS_CLASS && IFXMIPS -+ help -+ This option enables support for the CM-X270 LEDs. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-c - obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o - obj-$(CONFIG_LEDS_FSG) += leds-fsg.o - obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o -+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -704,6 +704,12 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config IFXMIPS_WDT -+ bool "IFXMips watchdog" -+ depends on IFXMIPS -+ help -+ Hardware driver for the IFXMIPS Watchdog Timer. -+ - # PARISC Architecture - - # POWERPC Architecture diff --git a/target/linux/ifxmips/patches-2.6.27/160-cfi-swap.patch b/target/linux/ifxmips/patches-2.6.27/160-cfi-swap.patch deleted file mode 100644 index 9010c4b4e4..0000000000 --- a/target/linux/ifxmips/patches-2.6.27/160-cfi-swap.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1025,7 +1025,9 @@ static int __xipram do_write_oneword(str - int retry_cnt = 0; - - adr += chip->start; -- -+#ifdef CONFIG_IFXMIPS -+ adr ^= 2; -+#endif - spin_lock(chip->mutex); - ret = get_chip(map, chip, adr, FL_WRITING); - if (ret) { diff --git a/target/linux/ifxmips/patches-2.6.27/170-dma_hack.patch b/target/linux/ifxmips/patches-2.6.27/170-dma_hack.patch deleted file mode 100644 index 5416b6aae2..0000000000 --- a/target/linux/ifxmips/patches-2.6.27/170-dma_hack.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -51,6 +51,8 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_wback); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ - diff --git a/target/linux/ifxmips/patches-2.6.27/200-genirq_fix.patch b/target/linux/ifxmips/patches-2.6.27/200-genirq_fix.patch deleted file mode 100644 index ba6372317c..0000000000 --- a/target/linux/ifxmips/patches-2.6.27/200-genirq_fix.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/kernel/irq/chip.c -+++ b/kernel/irq/chip.c -@@ -526,6 +526,9 @@ handle_percpu_irq(unsigned int irq, stru - - kstat_this_cpu.irqs[irq]++; - -+ if (unlikely(!desc->action || (desc->status & IRQ_DISABLED))) -+ return; -+ - if (desc->chip->ack) - desc->chip->ack(irq); - diff --git a/target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch deleted file mode 100644 index 22f7e0c752..0000000000 --- a/target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -1514,7 +1514,16 @@ void __cpuinit per_cpu_trap_init(void) - */ - if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; -+ if (!cp0_compare_irq) -+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; -+ - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; -+ if (!cp0_perfcount_irq) -+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ; -+ -+ if (arch_fixup_c0_irqs) -+ arch_fixup_c0_irqs(); -+ - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; - } else { ---- a/arch/mips/include/asm/irq.h -+++ b/arch/mips/include/asm/irq.h -@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq) - * IE7. Since R2 their number has to be read from the c0_intctl register. - */ - #define CP0_LEGACY_COMPARE_IRQ 7 -+#define CP0_LEGACY_PERFCNT_IRQ 7 - - extern int cp0_compare_irq; - extern int cp0_perfcount_irq; - -+extern void __weak arch_fixup_c0_irqs(void); -+ -+ - #endif /* _ASM_IRQ_H */ diff --git a/target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch deleted file mode 100644 index ac44c308fa..0000000000 --- a/target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -21,6 +21,22 @@ - - #ifndef CONFIG_MIPS_MT_SMTC - -+/* -+ * Compare interrupt can be routed and latched outside the core, -+ * so a single execution hazard barrier may not be enough to give -+ * it time to clear as seen in the Cause register. 4 time the -+ * pipeline depth seems reasonably conservative, and empirically -+ * works better in configurations with high CPU/bus clock ratios. -+ */ -+ -+#define compare_change_hazard() \ -+ do { \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ } while (0) -+ - static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) - { -@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -+ compare_change_hazard(); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; - return res; - } diff --git a/target/linux/ifxmips/patches-2.6.28/100-board.patch b/target/linux/ifxmips/patches-2.6.28/100-board.patch deleted file mode 100644 index 39bda41ef1..0000000000 --- a/target/linux/ifxmips/patches-2.6.28/100-board.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -79,6 +79,22 @@ config MIPS_COBALT - select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - -+config IFXMIPS -+ bool "Infineon Twinpass, Danube, Amazon-SE" -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select CEVT_R4K -+ select CSRC_R4K -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_HAS_EARLY_PRINTK -+ select HW_HAS_PCI -+ select GENERIC_GPIO -+ select SWAP_IO_SPACE -+ select GENERIC_HARDIRQS_NO__DO_IRQ -+ - config MACH_DECSTATION - bool "DECstations" - select BOOT_ELF32 -@@ -607,6 +623,7 @@ source "arch/mips/sgi-ip27/Kconfig" - source "arch/mips/sibyte/Kconfig" - source "arch/mips/txx9/Kconfig" - source "arch/mips/vr41xx/Kconfig" -+source "arch/mips/ifxmips/Kconfig" - - endmenu - ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -285,6 +285,13 @@ cflags-$(CONFIG_MIPS_COBALT) += -I$(srct - load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 - - # -+# Infineon IFXMIPS -+# -+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/ -+cflags-$(CONFIG_IFXMIPS) += -I$(srctree)/arch/mips/include/asm/mach-ifxmips -+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000 -+ -+# - # DECstation family - # - core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ ---- a/arch/mips/include/asm/bootinfo.h -+++ b/arch/mips/include/asm/bootinfo.h -@@ -57,6 +57,12 @@ - #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ - #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ - -+/* -+ * Valid machtype for group IFXMIPS -+ */ -+#define MACH_GROUP_IFXMIPS 29 -+#define MACH_INFINEON_IFXMIPS 0 -+ - #define CL_SIZE COMMAND_LINE_SIZE - - extern char *system_type; ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o - obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o -+obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o diff --git a/target/linux/ifxmips/patches-2.6.28/110-drivers.patch b/target/linux/ifxmips/patches-2.6.28/110-drivers.patch deleted file mode 100644 index 23ceb3cd6a..0000000000 --- a/target/linux/ifxmips/patches-2.6.28/110-drivers.patch +++ /dev/null @@ -1,152 +0,0 @@ ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -110,6 +110,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o - obj-$(CONFIG_JS_RTC) += js-rtc.o - js-rtc-y = rtc.o - -+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o -+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o -+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o -+ - # Files generated that shall be removed upon make clean - clean-files := consolemap_deftbl.c defkeymap.c - ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NETtel) += nettel.o - obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o - obj-$(CONFIG_MTD_H720X) += h720x-flash.o - obj-$(CONFIG_MTD_SBC8240) += sbc8240.o -+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o - obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o - obj-$(CONFIG_MTD_IXP2000) += ixp2000.o - obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -343,6 +343,12 @@ config MACB - - source "drivers/net/arm/Kconfig" - -+config IFXMIPS_MII0 -+ tristate "Infineon IFXMips eth0 driver" -+ depends on IFXMIPS -+ help -+ Support for the MII0 inside the IFXMips SOC -+ - config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS || SUPERH ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -1304,6 +1304,14 @@ config SERIAL_OF_PLATFORM - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -+config SERIAL_IFXMIPS -+ bool "IFXMips serial driver" -+ depends on IFXMIPS -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE -+ help -+ Driver for the ifxmipss built in ASC hardware -+ - config SERIAL_QE - tristate "Freescale QUICC Engine serial port support" - depends on QUICC_ENGINE ---- a/drivers/serial/Makefile -+++ b/drivers/serial/Makefile -@@ -73,3 +73,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s - obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o - obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o - obj-$(CONFIG_SERIAL_QE) += ucc_uart.o -+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o - - # PARISC Architecture - ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/ - obj-$(CONFIG_NIU) += niu.o - obj-$(CONFIG_VIRTIO_NET) += virtio_net.o - obj-$(CONFIG_SFC) += sfc/ -- -+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW - If you say N, all options in this submenu will be skipped and disabled. - - if CRYPTO_HW -+config CRYPTO_DEV_IFXMIPS -+ tristate "Support for IFXMIPS Data Encryption Unit" -+ depends on IFXMIPS - - config CRYPTO_DEV_PADLOCK - tristate "Support for VIA PadLock ACE" ---- a/drivers/crypto/Makefile -+++ b/drivers/crypto/Makefile -@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode- - obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o - obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o - obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o -+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -321,3 +321,10 @@ config USB_HWA_HCD - - To compile this driver a module, choose M here: the module - will be called "hwa-hc". -+ -+config USB_DWC_HCD -+ tristate "IFXMIPS USB Host Controller Driver" -+ depends on USB && IFXMIPS -+ default y -+ help -+ Danube USB Host Controller ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -171,6 +171,12 @@ config LEDS_DA903X - This option enables support for on-chip LED drivers found - on Dialog Semiconductor DA9030/DA9034 PMICs. - -+config LEDS_IFXMIPS -+ tristate "LED Support for IFXMIPS LEDs" -+ depends on LEDS_CLASS && IFXMIPS -+ help -+ This option enables support for the IFXMIPS LEDs. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o - obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o - obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o - obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o -+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -747,6 +747,12 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config IFXMIPS_WDT -+ bool "IFXMips watchdog" -+ depends on IFXMIPS -+ help -+ Hardware driver for the IFXMIPS Watchdog Timer. -+ - # PARISC Architecture - - # POWERPC Architecture diff --git a/target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch b/target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch deleted file mode 100644 index 53a0db873d..0000000000 --- a/target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1069,7 +1069,9 @@ static int __xipram do_write_oneword(str - int retry_cnt = 0; - - adr += chip->start; -- -+#ifdef CONFIG_IFXMIPS -+ adr ^= 2; -+#endif - spin_lock(chip->mutex); - ret = get_chip(map, chip, adr, FL_WRITING); - if (ret) { diff --git a/target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch b/target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch deleted file mode 100644 index 5416b6aae2..0000000000 --- a/target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -51,6 +51,8 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_wback); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ - diff --git a/target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch b/target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch deleted file mode 100644 index 2050d1f0bb..0000000000 --- a/target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/kernel/irq/chip.c -+++ b/kernel/irq/chip.c -@@ -524,6 +524,9 @@ handle_percpu_irq(unsigned int irq, stru - - kstat_incr_irqs_this_cpu(irq, desc); - -+ if (unlikely(!desc->action || (desc->status & IRQ_DISABLED))) -+ return; -+ - if (desc->chip->ack) - desc->chip->ack(irq); - diff --git a/target/linux/ifxmips/patches-2.6.30/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches-2.6.30/000-mips-bad-intctl.patch new file mode 100644 index 0000000000..bd1b399c12 --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/000-mips-bad-intctl.patch @@ -0,0 +1,36 @@ +Index: linux-2.6.30.5/arch/mips/kernel/traps.c +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/kernel/traps.c 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/kernel/traps.c 2009-09-02 18:23:37.000000000 +0200 +@@ -1542,7 +1542,16 @@ + */ + if (cpu_has_mips_r2) { + cp0_compare_irq = (read_c0_intctl() >> 29) & 7; ++ if (!cp0_compare_irq) ++ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; ++ + cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; ++ if (!cp0_perfcount_irq) ++ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ; ++ ++ if (arch_fixup_c0_irqs) ++ arch_fixup_c0_irqs(); ++ + if (cp0_perfcount_irq == cp0_compare_irq) + cp0_perfcount_irq = -1; + } else { +Index: linux-2.6.30.5/arch/mips/include/asm/irq.h +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/include/asm/irq.h 2009-09-02 18:24:49.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/include/asm/irq.h 2009-09-02 18:26:05.000000000 +0200 +@@ -157,8 +157,10 @@ + * IE7. Since R2 their number has to be read from the c0_intctl register. + */ + #define CP0_LEGACY_COMPARE_IRQ 7 ++#define CP0_LEGACY_PERFCNT_IRQ 7 + + extern int cp0_compare_irq; + extern int cp0_perfcount_irq; ++extern void __weak arch_fixup_c0_irqs(void); + + #endif /* _ASM_IRQ_H */ diff --git a/target/linux/ifxmips/patches-2.6.30/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches-2.6.30/010-mips_clocksource_init_war.patch new file mode 100644 index 0000000000..49ff663105 --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/010-mips_clocksource_init_war.patch @@ -0,0 +1,35 @@ +Index: linux-2.6.30.5/arch/mips/kernel/cevt-r4k.c +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/kernel/cevt-r4k.c 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/kernel/cevt-r4k.c 2009-09-02 18:26:26.000000000 +0200 +@@ -21,6 +21,22 @@ + + #ifndef CONFIG_MIPS_MT_SMTC + ++/* ++ * Compare interrupt can be routed and latched outside the core, ++ * so a single execution hazard barrier may not be enough to give ++ * it time to clear as seen in the Cause register. 4 time the ++ * pipeline depth seems reasonably conservative, and empirically ++ * works better in configurations with high CPU/bus clock ratios. ++ */ ++ ++#define compare_change_hazard() \ ++ do { \ ++ irq_disable_hazard(); \ ++ irq_disable_hazard(); \ ++ irq_disable_hazard(); \ ++ irq_disable_hazard(); \ ++ } while (0) ++ + static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) + { +@@ -30,6 +46,7 @@ + cnt = read_c0_count(); + cnt += delta; + write_c0_compare(cnt); ++ compare_change_hazard(); + res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; + return res; + } diff --git a/target/linux/ifxmips/patches-2.6.30/100-board.patch b/target/linux/ifxmips/patches-2.6.30/100-board.patch new file mode 100644 index 0000000000..62a683ddf0 --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/100-board.patch @@ -0,0 +1,77 @@ +Index: linux-2.6.30.5/arch/mips/Kconfig +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/Kconfig 2009-09-02 22:12:48.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/Kconfig 2009-09-03 01:18:31.000000000 +0200 +@@ -79,6 +79,24 @@ + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + ++config IFXMIPS ++ bool "Infineon Twinpass, Danube, Amazon-SE" ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select CEVT_R4K ++ select CSRC_R4K ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select HAVE_STD_PC_SERIAL_PORT ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_MULTITHREADING ++ select SYS_HAS_EARLY_PRINTK ++ select HW_HAS_PCI ++ select GENERIC_GPIO ++ select ARCH_WANT_OPTIONAL_GPIOLIB ++ select SWAP_IO_SPACE ++ + config MACH_DECSTATION + bool "DECstations" + select BOOT_ELF32 +@@ -643,6 +661,7 @@ + source "arch/mips/txx9/Kconfig" + source "arch/mips/vr41xx/Kconfig" + source "arch/mips/cavium-octeon/Kconfig" ++source "arch/mips/ifxmips/Kconfig" + + endmenu + +Index: linux-2.6.30.5/arch/mips/Makefile +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/Makefile 2009-09-02 22:12:48.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/Makefile 2009-09-02 22:12:53.000000000 +0200 +@@ -290,6 +290,13 @@ + load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 + + # ++# Infineon IFXMIPS ++# ++core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/ ++cflags-$(CONFIG_IFXMIPS) += -I$(srctree)/arch/mips/include/asm/mach-ifxmips ++load-$(CONFIG_IFXMIPS) += 0xffffffff80002000 ++ ++# + # DECstation family + # + core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ +Index: linux-2.6.30.5/arch/mips/pci/Makefile +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/pci/Makefile 2009-09-02 22:12:48.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/pci/Makefile 2009-09-02 22:12:53.000000000 +0200 +@@ -52,3 +52,4 @@ + obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o + obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o + obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o ++obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o +Index: linux-2.6.30.5/arch/mips/include/asm/bootinfo.h +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/include/asm/bootinfo.h 2009-09-02 22:12:48.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/include/asm/bootinfo.h 2009-09-02 22:13:05.000000000 +0200 +@@ -57,6 +57,8 @@ + #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ + #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ + ++#define MACH_INFINEON_IFXMIPS 0 ++ + #define CL_SIZE COMMAND_LINE_SIZE + + extern char *system_type; diff --git a/target/linux/ifxmips/patches-2.6.30/110-drivers.patch b/target/linux/ifxmips/patches-2.6.30/110-drivers.patch new file mode 100644 index 0000000000..5d5891d001 --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/110-drivers.patch @@ -0,0 +1,162 @@ +Index: linux-2.6.30.5/drivers/char/Makefile +=================================================================== +--- linux-2.6.30.5.orig/drivers/char/Makefile 2009-09-02 18:22:49.000000000 +0200 ++++ linux-2.6.30.5/drivers/char/Makefile 2009-09-02 18:29:51.000000000 +0200 +@@ -112,6 +112,10 @@ + obj-$(CONFIG_JS_RTC) += js-rtc.o + js-rtc-y = rtc.o + ++obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o ++obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o ++obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o ++ + # Files generated that shall be removed upon make clean + clean-files := consolemap_deftbl.c defkeymap.c + +Index: linux-2.6.30.5/drivers/mtd/maps/Makefile +=================================================================== +--- linux-2.6.30.5.orig/drivers/mtd/maps/Makefile 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/drivers/mtd/maps/Makefile 2009-09-02 18:30:09.000000000 +0200 +@@ -62,3 +62,4 @@ + obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o + obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o + obj-$(CONFIG_MTD_VMU) += vmu-flash.o ++obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o +Index: linux-2.6.30.5/drivers/net/Kconfig +=================================================================== +--- linux-2.6.30.5.orig/drivers/net/Kconfig 2009-09-02 18:22:49.000000000 +0200 ++++ linux-2.6.30.5/drivers/net/Kconfig 2009-09-02 18:29:51.000000000 +0200 +@@ -353,6 +353,12 @@ + + source "drivers/net/arm/Kconfig" + ++config IFXMIPS_MII0 ++ tristate "Infineon IFXMips eth0 driver" ++ depends on IFXMIPS ++ help ++ Support for the MII0 inside the IFXMips SOC ++ + config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on ARM || MIPS || SUPERH +Index: linux-2.6.30.5/drivers/serial/Kconfig +=================================================================== +--- linux-2.6.30.5.orig/drivers/serial/Kconfig 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/drivers/serial/Kconfig 2009-09-02 18:29:51.000000000 +0200 +@@ -1365,6 +1365,14 @@ + help + Support for Console on the NWP serial ports. + ++config SERIAL_IFXMIPS ++ bool "IFXMips serial driver" ++ depends on IFXMIPS ++ select SERIAL_CORE ++ select SERIAL_CORE_CONSOLE ++ help ++ Driver for the ifxmipss built in ASC hardware ++ + config SERIAL_QE + tristate "Freescale QUICC Engine serial port support" + depends on QUICC_ENGINE +Index: linux-2.6.30.5/drivers/serial/Makefile +=================================================================== +--- linux-2.6.30.5.orig/drivers/serial/Makefile 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/drivers/serial/Makefile 2009-09-02 18:29:51.000000000 +0200 +@@ -77,3 +77,4 @@ + obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o + obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o + obj-$(CONFIG_SERIAL_QE) += ucc_uart.o ++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o +Index: linux-2.6.30.5/drivers/watchdog/Makefile +=================================================================== +--- linux-2.6.30.5.orig/drivers/watchdog/Makefile 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/drivers/watchdog/Makefile 2009-09-02 18:29:51.000000000 +0200 +@@ -105,6 +105,7 @@ + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o + + # PARISC Architecture + +Index: linux-2.6.30.5/drivers/net/Makefile +=================================================================== +--- linux-2.6.30.5.orig/drivers/net/Makefile 2009-09-02 18:22:49.000000000 +0200 ++++ linux-2.6.30.5/drivers/net/Makefile 2009-09-02 18:30:37.000000000 +0200 +@@ -234,6 +234,7 @@ + obj-$(CONFIG_MLX4_CORE) += mlx4/ + obj-$(CONFIG_ENC28J60) += enc28j60.o + obj-$(CONFIG_ETHOC) += ethoc.o ++obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o + + obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o + +Index: linux-2.6.30.5/drivers/crypto/Kconfig +=================================================================== +--- linux-2.6.30.5.orig/drivers/crypto/Kconfig 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/drivers/crypto/Kconfig 2009-09-02 18:29:51.000000000 +0200 +@@ -9,6 +9,9 @@ + If you say N, all options in this submenu will be skipped and disabled. + + if CRYPTO_HW ++config CRYPTO_DEV_IFXMIPS ++ tristate "Support for IFXMIPS Data Encryption Unit" ++ depends on IFXMIPS + + config CRYPTO_DEV_PADLOCK + tristate "Support for VIA PadLock ACE" +Index: linux-2.6.30.5/drivers/crypto/Makefile +=================================================================== +--- linux-2.6.30.5.orig/drivers/crypto/Makefile 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/drivers/crypto/Makefile 2009-09-02 18:30:55.000000000 +0200 +@@ -5,3 +5,4 @@ + obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o + obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o + obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/ ++obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o +Index: linux-2.6.30.5/drivers/leds/Kconfig +=================================================================== +--- linux-2.6.30.5.orig/drivers/leds/Kconfig 2009-09-02 18:22:49.000000000 +0200 ++++ linux-2.6.30.5/drivers/leds/Kconfig 2009-09-02 18:29:51.000000000 +0200 +@@ -227,6 +227,12 @@ + This option enables support for BD2802GU RGB LED driver chips + accessed via the I2C bus. + ++config LEDS_IFXMIPS ++ tristate "LED Support for IFXMIPS LEDs" ++ depends on LEDS_CLASS && IFXMIPS ++ help ++ This option enables support for the CM-X270 LEDs. ++ + comment "LED Triggers" + + config LEDS_TRIGGERS +Index: linux-2.6.30.5/drivers/leds/Makefile +=================================================================== +--- linux-2.6.30.5.orig/drivers/leds/Makefile 2009-09-02 18:22:49.000000000 +0200 ++++ linux-2.6.30.5/drivers/leds/Makefile 2009-09-02 18:31:23.000000000 +0200 +@@ -27,6 +27,7 @@ + obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o + obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o + obj-$(CONFIG_LEDS_PWM) += leds-pwm.o ++obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o + + # LED SPI Drivers + obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o +Index: linux-2.6.30.5/drivers/watchdog/Kconfig +=================================================================== +--- linux-2.6.30.5.orig/drivers/watchdog/Kconfig 2009-08-16 23:19:38.000000000 +0200 ++++ linux-2.6.30.5/drivers/watchdog/Kconfig 2009-09-02 18:29:51.000000000 +0200 +@@ -764,6 +764,12 @@ + help + Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. + ++config IFXMIPS_WDT ++ bool "IFXMips watchdog" ++ depends on IFXMIPS ++ help ++ Hardware driver for the IFXMIPS Watchdog Timer. ++ + # PARISC Architecture + + # POWERPC Architecture diff --git a/target/linux/ifxmips/patches-2.6.30/160-cfi-swap.patch b/target/linux/ifxmips/patches-2.6.30/160-cfi-swap.patch new file mode 100644 index 0000000000..109f958e7a --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/160-cfi-swap.patch @@ -0,0 +1,15 @@ +Index: linux-2.6.30.5/drivers/mtd/chips/cfi_cmdset_0002.c +=================================================================== +--- linux-2.6.30.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2009-09-02 18:22:49.000000000 +0200 ++++ linux-2.6.30.5/drivers/mtd/chips/cfi_cmdset_0002.c 2009-09-02 18:31:31.000000000 +0200 +@@ -1090,7 +1090,9 @@ + int retry_cnt = 0; + + adr += chip->start; +- ++#ifdef CONFIG_IFXMIPS ++ adr ^= 2; ++#endif + spin_lock(chip->mutex); + ret = get_chip(map, chip, adr, FL_WRITING); + if (ret) { diff --git a/target/linux/ifxmips/patches-2.6.30/170-dma_hack.patch b/target/linux/ifxmips/patches-2.6.30/170-dma_hack.patch new file mode 100644 index 0000000000..469dc7441b --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/170-dma_hack.patch @@ -0,0 +1,13 @@ +Index: linux-2.6.30.5/arch/mips/mm/cache.c +=================================================================== +--- linux-2.6.30.5.orig/arch/mips/mm/cache.c 2009-09-02 18:31:37.000000000 +0200 ++++ linux-2.6.30.5/arch/mips/mm/cache.c 2009-09-02 18:31:42.000000000 +0200 +@@ -52,6 +52,8 @@ + void (*_dma_cache_inv)(unsigned long start, unsigned long size); + + EXPORT_SYMBOL(_dma_cache_wback_inv); ++EXPORT_SYMBOL(_dma_cache_wback); ++EXPORT_SYMBOL(_dma_cache_inv); + + #endif /* CONFIG_DMA_NONCOHERENT */ + diff --git a/target/linux/ifxmips/patches-2.6.30/200-genirq_fix.patch b/target/linux/ifxmips/patches-2.6.30/200-genirq_fix.patch new file mode 100644 index 0000000000..1fbd4c86e0 --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/200-genirq_fix.patch @@ -0,0 +1,14 @@ +Index: linux-2.6.30.5/kernel/irq/chip.c +=================================================================== +--- linux-2.6.30.5.orig/kernel/irq/chip.c 2009-09-02 20:09:15.000000000 +0200 ++++ linux-2.6.30.5/kernel/irq/chip.c 2009-09-02 20:09:25.000000000 +0200 +@@ -537,6 +537,9 @@ + + kstat_incr_irqs_this_cpu(irq, desc); + ++ if (unlikely(!desc->action || (desc->status & IRQ_DISABLED))) ++ return; ++ + if (desc->chip->ack) + desc->chip->ack(irq); + diff --git a/target/linux/ifxmips/patches-2.6.30/201-atm.patch b/target/linux/ifxmips/patches-2.6.30/201-atm.patch new file mode 100644 index 0000000000..bbf013dc38 --- /dev/null +++ b/target/linux/ifxmips/patches-2.6.30/201-atm.patch @@ -0,0 +1,26 @@ +Index: linux-2.6.28.10/include/linux/atm.h +=================================================================== +--- linux-2.6.28.10.orig/include/linux/atm.h 2009-05-02 20:54:43.000000000 +0200 ++++ linux-2.6.28.10/include/linux/atm.h 2009-09-02 15:00:30.000000000 +0200 +@@ -139,6 +139,9 @@ + int min_pcr; /* minimum PCR in cells per second */ + int max_cdv; /* maximum CDV in microseconds */ + int max_sdu; /* maximum SDU in bytes */ ++ int scr; /* sustained rate in cells per second */ ++ int mbs; /* maximum burst size (MBS) in cells */ ++ int cdv; /* Cell delay varition */ + /* extra params for ABR */ + unsigned int icr; /* Initial Cell Rate (24-bit) */ + unsigned int tbe; /* Transient Buffer Exposure (24-bit) */ +Index: linux-2.6.28.10/kernel/time/timekeeping.c +=================================================================== +--- linux-2.6.28.10.orig/kernel/time/timekeeping.c 2009-09-02 15:41:06.000000000 +0200 ++++ linux-2.6.28.10/kernel/time/timekeeping.c 2009-09-02 15:41:23.000000000 +0200 +@@ -43,6 +43,7 @@ + * used instead. + */ + struct timespec xtime __attribute__ ((aligned (16))); ++EXPORT_SYMBOL(xtime); + struct timespec wall_to_monotonic __attribute__ ((aligned (16))); + static unsigned long total_sleep_time; /* seconds */ + diff --git a/target/linux/ifxmips/patches/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches/000-mips-bad-intctl.patch deleted file mode 100644 index 3b1c2dc7c2..0000000000 --- a/target/linux/ifxmips/patches/000-mips-bad-intctl.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -1464,7 +1464,16 @@ void __cpuinit per_cpu_trap_init(void) - */ - if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; -+ if (!cp0_compare_irq) -+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; -+ - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; -+ if (!cp0_perfcount_irq) -+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ; -+ -+ if (arch_fixup_c0_irqs) -+ arch_fixup_c0_irqs(); -+ - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; - } else { ---- a/include/asm-mips/irq.h -+++ b/include/asm-mips/irq.h -@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq) - * IE7. Since R2 their number has to be read from the c0_intctl register. - */ - #define CP0_LEGACY_COMPARE_IRQ 7 -+#define CP0_LEGACY_PERFCNT_IRQ 7 - - extern int cp0_compare_irq; - extern int cp0_perfcount_irq; - -+extern void __weak arch_fixup_c0_irqs(void); -+ -+ - #endif /* _ASM_IRQ_H */ diff --git a/target/linux/ifxmips/patches/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches/010-mips_clocksource_init_war.patch deleted file mode 100644 index 61d9610cf4..0000000000 --- a/target/linux/ifxmips/patches/010-mips_clocksource_init_war.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -13,6 +13,22 @@ - #include - #include - -+/* -+ * Compare interrupt can be routed and latched outside the core, -+ * so a single execution hazard barrier may not be enough to give -+ * it time to clear as seen in the Cause register. 4 time the -+ * pipeline depth seems reasonably conservative, and empirically -+ * works better in configurations with high CPU/bus clock ratios. -+ */ -+ -+#define compare_change_hazard() \ -+ do { \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ } while (0) -+ - static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) - { -@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -+ compare_change_hazard(); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; - #ifdef CONFIG_MIPS_MT_SMTC - evpe(vpflags); -@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void) - */ - if (c0_compare_int_pending()) { - write_c0_compare(read_c0_count()); -- irq_disable_hazard(); -+ compare_change_hazard(); - if (c0_compare_int_pending()) - return 0; - } -@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void) - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -- irq_disable_hazard(); -+ compare_change_hazard(); - if ((int)(read_c0_count() - cnt) < 0) - break; - /* increase delta if the timer was already expired */ -@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void) - while ((int)(read_c0_count() - cnt) <= 0) - ; /* Wait for expiry */ - -+ compare_change_hazard(); - if (!c0_compare_int_pending()) - return 0; - - write_c0_compare(read_c0_count()); -- irq_disable_hazard(); -+ compare_change_hazard(); - if (c0_compare_int_pending()) - return 0; - diff --git a/target/linux/ifxmips/patches/100-board.patch b/target/linux/ifxmips/patches/100-board.patch deleted file mode 100644 index 052a08a2c7..0000000000 --- a/target/linux/ifxmips/patches/100-board.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -78,6 +78,23 @@ config MIPS_COBALT - select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - -+config IFXMIPS -+ bool "Infineon Twinpass, Danube, Amazon-SE" -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select CEVT_R4K -+ select CSRC_R4K -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select HAVE_STD_PC_SERIAL_PORT -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_MULTITHREADING -+ select SYS_HAS_EARLY_PRINTK -+ select HW_HAS_PCI -+ select GENERIC_GPIO -+ select SWAP_IO_SPACE -+ - config MACH_DECSTATION - bool "DECstations" - select BOOT_ELF32 -@@ -697,6 +714,7 @@ source "arch/mips/sibyte/Kconfig" - source "arch/mips/tx4927/Kconfig" - source "arch/mips/tx4938/Kconfig" - source "arch/mips/vr41xx/Kconfig" -+source "arch/mips/ifxmips/Kconfig" - - endmenu - ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -283,6 +283,13 @@ cflags-$(CONFIG_MIPS_COBALT) += -Iinclud - load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 - - # -+# Infineon IFXMIPS -+# -+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/ -+cflags-$(CONFIG_IFXMIPS) += -Iinclude/asm-mips/mach-ifxmips -+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000 -+ -+# - # DECstation family - # - core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/ ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -94,6 +94,12 @@ - #define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ - #define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ - -+/* -+ * Valid machtype for group IFXMIPS -+ */ -+#define MACH_GROUP_IFXMIPS 29 -+#define MACH_INFINEON_IFXMIPS 0 -+ - #define CL_SIZE COMMAND_LINE_SIZE - - extern char *system_type; ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_IFXMIPS) += pci-ifxmips.o ops-ifxmips.o diff --git a/target/linux/ifxmips/patches/110-drivers.patch b/target/linux/ifxmips/patches/110-drivers.patch deleted file mode 100644 index 931978fd9a..0000000000 --- a/target/linux/ifxmips/patches/110-drivers.patch +++ /dev/null @@ -1,149 +0,0 @@ ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -114,6 +114,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o - obj-$(CONFIG_JS_RTC) += js-rtc.o - js-rtc-y = rtc.o - -+obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o -+obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o -+obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o -+ - # Files generated that shall be removed upon make clean - clean-files := consolemap_deftbl.c defkeymap.c - ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o - obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o - obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o - obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o -+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -351,6 +351,12 @@ config MACB - - source "drivers/net/arm/Kconfig" - -+config IFXMIPS_MII0 -+ tristate "Infineon IFXMips eth0 driver" -+ depends on IFXMIPS -+ help -+ Support for the MII0 inside the IFXMips SOC -+ - config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS || SUPERH ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -1334,6 +1334,14 @@ config SERIAL_OF_PLATFORM - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -+config SERIAL_IFXMIPS -+ bool "IFXMips serial driver" -+ depends on IFXMIPS -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE -+ help -+ Driver for the ifxmipss built in ASC hardware -+ - config SERIAL_QE - tristate "Freescale QUICC Engine serial port support" - depends on QUICC_ENGINE ---- a/drivers/serial/Makefile -+++ b/drivers/serial/Makefile -@@ -68,3 +68,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s - obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o - obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o - obj-$(CONFIG_SERIAL_QE) += ucc_uart.o -+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o - - # PARISC Architecture - ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/ - obj-$(CONFIG_NIU) += niu.o - obj-$(CONFIG_VIRTIO_NET) += virtio_net.o - obj-$(CONFIG_SFC) += sfc/ -- -+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW - If you say N, all options in this submenu will be skipped and disabled. - - if CRYPTO_HW -+config CRYPTO_DEV_IFXMIPS -+ tristate "Support for IFXMIPS Data Encryption Unit" -+ depends on IFXMIPS - - config CRYPTO_DEV_PADLOCK - tristate "Support for VIA PadLock ACE" ---- a/drivers/crypto/Makefile -+++ b/drivers/crypto/Makefile -@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode- - obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o - obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o - obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o -+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597 - help - This driver enables support for the on-chip R8A66597 in the - SH7366 and SH7723 processors. -+ -+config USB_DWC_HCD -+ tristate "IFXMIPS USB Host Controller Driver" -+ depends on USB && IFXMIPS -+ default y -+ help -+ Danube USB Host Controller ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -153,6 +153,12 @@ config LEDS_CLEVO_MAIL - To compile this driver as a module, choose M here: the - module will be called leds-clevo-mail. - -+config LEDS_IFXMIPS -+ tristate "LED Support for IFXMIPS LEDs" -+ depends on LEDS_CLASS && IFXMIPS -+ help -+ This option enables support for the CM-X270 LEDs. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_CM_X270) - obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o - obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o - obj-$(CONFIG_LEDS_FSG) += leds-fsg.o -+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -683,6 +683,12 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config IFXMIPS_WDT -+ bool "IFXMips watchdog" -+ depends on IFXMIPS -+ help -+ Hardware driver for the IFXMIPS Watchdog Timer. -+ - # PARISC Architecture - - # POWERPC Architecture diff --git a/target/linux/ifxmips/patches/160-cfi-swap.patch b/target/linux/ifxmips/patches/160-cfi-swap.patch deleted file mode 100644 index 5c98c35525..0000000000 --- a/target/linux/ifxmips/patches/160-cfi-swap.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1041,7 +1041,9 @@ static int __xipram do_write_oneword(str - int retry_cnt = 0; - - adr += chip->start; -- -+#ifdef CONFIG_IFXMIPS -+ adr ^= 2; -+#endif - spin_lock(chip->mutex); - ret = get_chip(map, chip, adr, FL_WRITING); - if (ret) { diff --git a/target/linux/ifxmips/patches/170-dma_hack.patch b/target/linux/ifxmips/patches/170-dma_hack.patch deleted file mode 100644 index 6175c3e8f6..0000000000 --- a/target/linux/ifxmips/patches/170-dma_hack.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -50,6 +50,8 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_wback); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT */ - -- cgit v1.2.3