From 474e422dc25f2e0cf693a05b970483991c4e86d9 Mon Sep 17 00:00:00 2001 From: mb Date: Mon, 23 Aug 2010 16:14:04 +0000 Subject: n810: Fix USB board init git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22781 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/omap24xx/config-2.6.35 | 22 ++- .../omap24xx/patches-2.6.35/300-nokia-board.patch | 203 +++++++++++++++------ 2 files changed, 160 insertions(+), 65 deletions(-) (limited to 'target') diff --git a/target/linux/omap24xx/config-2.6.35 b/target/linux/omap24xx/config-2.6.35 index 0294b4b72b..7c1e79bb6e 100644 --- a/target/linux/omap24xx/config-2.6.35 +++ b/target/linux/omap24xx/config-2.6.35 @@ -351,6 +351,7 @@ CONFIG_MTD_ONENAND_OTP=y # CONFIG_MTD_ONENAND_VERIFY_WRITE is not set # CONFIG_MTD_ROOTFS_ROOT_DEV is not set # CONFIG_MTD_ROOTFS_SPLIT is not set +CONFIG_MUSB_PIO_ONLY=y CONFIG_N810BM=y CONFIG_NAMESPACES=y CONFIG_NEED_DMA_MAP_STATE=y @@ -359,6 +360,7 @@ CONFIG_NETFILTER_XTABLES=y # CONFIG_NET_NS is not set # CONFIG_NET_SCHED is not set CONFIG_NLS=y +CONFIG_NOP_USB_XCEIV=y CONFIG_NO_HZ=y CONFIG_OABI_COMPAT=y # CONFIG_OMAP2_DSS is not set @@ -471,7 +473,7 @@ CONFIG_TOUCHSCREEN_TSC2005=y CONFIG_TREE_RCU=y CONFIG_TUN=m CONFIG_UID16=y -CONFIG_USB=m +CONFIG_USB=y # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_CDC_COMPOSITE is not set @@ -487,7 +489,7 @@ CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_FSL_QE is not set # CONFIG_USB_GADGET_FSL_USB2 is not set @@ -496,30 +498,36 @@ CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_LANGWELL is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_GADGET_MUSB_HDRC=y # CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_OMAP=y +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set CONFIG_USB_GADGET_SELECTED=y -CONFIG_USB_GADGET_VBUS_DRAW=50 +CONFIG_USB_GADGET_VBUS_DRAW=100 # CONFIG_USB_G_HID is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_G_WEBCAM is not set # CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_MUSB_DEBUG=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_OTG=y +# CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_OMAP1=y -CONFIG_USB_OMAP=y CONFIG_USB_OTG=y CONFIG_USB_OTG_UTILS=y # CONFIG_USB_PWC is not set CONFIG_USB_SUPPORT=y +CONFIG_USB_TUSB6010=y # CONFIG_USB_ZERO is not set # CONFIG_USER_NS is not set CONFIG_V4L_USB_DRIVERS=y diff --git a/target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch b/target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch index f0bf954dc1..e04963da51 100644 --- a/target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch +++ b/target/linux/omap24xx/patches-2.6.35/300-nokia-board.patch @@ -1,7 +1,16 @@ -Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c -=================================================================== ---- linux-2.6.35.orig/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:15.000000000 +0200 -+++ linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:30.000000000 +0200 +--- + arch/arm/mach-omap1/board-nokia770.c | 16 + + arch/arm/mach-omap2/Kconfig | 10 + + arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/board-n8x0-lcd.c | 127 +++++++++++++ + arch/arm/mach-omap2/board-n8x0-usb.c | 175 +++++++++++++++++++ + arch/arm/mach-omap2/board-n8x0.c | 319 +++++++++++++++++++++++++---------- + arch/arm/mach-omap2/control.c | 2 + arch/arm/mach-omap2/serial.c | 8 + 8 files changed, 569 insertions(+), 90 deletions(-) + +--- linux-2.6.35.3.orig/arch/arm/mach-omap1/board-nokia770.c ++++ linux-2.6.35.3/arch/arm/mach-omap1/board-nokia770.c @@ -37,6 +37,7 @@ #include #include @@ -34,10 +43,8 @@ Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c }; static void mipid_shutdown(struct mipid_platform_data *pdata) -Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c -=================================================================== ---- linux-2.6.35.orig/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:15.000000000 +0200 -+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:30.000000000 +0200 +--- linux-2.6.35.3.orig/arch/arm/mach-omap2/board-n8x0.c ++++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0.c @@ -18,8 +18,12 @@ #include #include @@ -51,12 +58,15 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c #include #include -@@ -32,6 +36,117 @@ +@@ -32,114 +36,156 @@ #include #include #include +#include -+ + +-static int slot1_cover_open; +-static int slot2_cover_open; +-static struct device *mmc_device; +#define RX51_TSC2005_RESET_GPIO 94 +#define RX51_TSC2005_IRQ_GPIO 106 +#define OMAP_TAG_NOKIA_BT 0x4e01 @@ -112,14 +122,32 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c + [0x53] = KEY_DOWN, + [0x55] = KEY_ENTER, + [0x5f] = KEY_ESC, -+ + +-#define TUSB6010_ASYNC_CS 1 +-#define TUSB6010_SYNC_CS 4 +-#define TUSB6010_GPIO_INT 58 +-#define TUSB6010_GPIO_ENABLE 0 +-#define TUSB6010_DMACHAN 0x3f + [0x61] = KEY_U, + [0x64] = KEY_LEFT, -+ + +-#if defined(CONFIG_USB_TUSB6010) || \ +- defined(CONFIG_USB_TUSB6010_MODULE) +-/* +- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and +- * 1.5 V voltage regulators of PM companion chip. Companion chip will then +- * provide then PGOOD signal to TUSB6010 which will release it from reset. +- */ +-static int tusb_set_power(int state) +-{ +- int i, retval = 0; + [0x71] = KEY_I, + [0x75] = KEY_KPENTER, +}; -+ + +- if (state) { +- gpio_set_value(TUSB6010_GPIO_ENABLE, 1); +- msleep(1); +static struct lm8323_platform_data lm8323_pdata = { + .repeat = 0, /* Repeat is handled in userspace for now. */ + .keymap = rx44_keymap, @@ -134,7 +162,13 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c + //.pwm1_name = "n810::keyboard", + //.pwm2_name = "n810::cover", +}; -+ + +- /* Wait until TUSB6010 pulls INT pin down */ +- i = 100; +- while (i && gpio_get_value(TUSB6010_GPIO_INT)) { +- msleep(1); +- i--; +- } +struct omap_bluetooth_config { + u8 chip_type; + u8 bt_wakeup_gpio; @@ -144,7 +178,15 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c + u8 bd_addr[6]; + u8 bt_sysclk; +}; -+ + +- if (!i) { +- printk(KERN_ERR "tusb: powerup failed\n"); +- retval = -ENODEV; +- } +- } else { +- gpio_set_value(TUSB6010_GPIO_ENABLE, 0); +- msleep(10); +- } +static struct platform_device n8x0_bt_device = { + .name = "hci_h4p", + .id = -1, @@ -154,42 +196,97 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c +void __init n8x0_bt_init(void) +{ + const struct omap_bluetooth_config *bt_config; -+ + +- return retval; + bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT, + struct omap_bluetooth_config); + n8x0_bt_device.dev.platform_data = (void *) bt_config; + if (platform_device_register(&n8x0_bt_device) < 0) + BUG(); -+} -+ + } + +-static struct musb_hdrc_config musb_config = { +- .multipoint = 1, +- .dyn_fifo = 1, +- .num_eps = 16, +- .ram_bits = 12, +static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, -+}; - - static int slot1_cover_open; - static int slot2_cover_open; -@@ -139,7 +254,34 @@ static struct omap2_mcspi_device_config - .single_channel = 1, }; +-static struct musb_hdrc_platform_data tusb_data = { +-#if defined(CONFIG_USB_MUSB_OTG) +- .mode = MUSB_OTG, +-#elif defined(CONFIG_USB_MUSB_PERIPHERAL) +- .mode = MUSB_PERIPHERAL, +-#else /* defined(CONFIG_USB_MUSB_HOST) */ +- .mode = MUSB_HOST, +-#endif +- .set_power = tusb_set_power, +- .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ +- .power = 100, /* Max 100 mA VBUS for host mode */ +- .config = &musb_config, +-}; +- +-static void __init n8x0_usb_init(void) +-{ +- int ret = 0; +- static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; +- +- /* PM companion chip power control pin */ +- ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable"); +- if (ret != 0) { +- printk(KERN_ERR "Could not get TUSB power GPIO%i\n", +- TUSB6010_GPIO_ENABLE); +- return; +- } +- gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); +- +- tusb_set_power(0); ++static int slot1_cover_open; ++static int slot2_cover_open; ++static struct device *mmc_device; + +- ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, +- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS, +- TUSB6010_GPIO_INT, TUSB6010_DMACHAN); +- if (ret != 0) +- goto err; + +- printk(announce); ++static struct omap2_mcspi_device_config p54spi_mcspi_config = { ++ .turbo_mode = 0, ++ .single_channel = 1, ++}; + +- return; +#ifdef CONFIG_MACH_NOKIA_N8X0_LCD +extern struct mipid_platform_data n8x0_mipid_platform_data; +#endif -+ + +-err: +- gpio_free(TUSB6010_GPIO_ENABLE); +#ifdef CONFIG_TOUCHSCREEN_TSC2005 +static struct tsc2005_platform_data tsc2005_config; +static void rx51_tsc2005_set_reset(bool enable) +{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); -+} -+ + } +-#else +- +-static void __init n8x0_usb_init(void) {} +- +-#endif /*CONFIG_USB_TUSB6010 */ + +- +-static struct omap2_mcspi_device_config p54spi_mcspi_config = { +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { -+ .turbo_mode = 0, -+ .single_channel = 1, -+}; + .turbo_mode = 0, + .single_channel = 1, + }; +#endif -+ + static struct spi_board_info n800_spi_board_info[] __initdata = { +#ifdef CONFIG_MACH_NOKIA_N8X0_LCD + { @@ -204,7 +301,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c { .modalias = "p54spi", .bus_num = 2, -@@ -147,6 +289,68 @@ static struct spi_board_info n800_spi_bo +@@ -147,6 +193,68 @@ static struct spi_board_info n800_spi_bo .max_speed_hz = 48000000, .controller_data = &p54spi_mcspi_config, }, @@ -273,7 +370,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c }; #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ -@@ -181,6 +385,20 @@ static struct mtd_partition onenand_part +@@ -181,6 +289,20 @@ static struct mtd_partition onenand_part }, }; @@ -294,7 +391,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c static struct omap_onenand_platform_data board_onenand_data = { .cs = 0, .gpio_irq = 26, -@@ -649,14 +867,37 @@ static void __init n8x0_init_irq(void) +@@ -649,14 +771,39 @@ static void __init n8x0_init_irq(void) omap_gpio_init(); } @@ -305,6 +402,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c +#define n8x0_mipid_init() 0 +#define n8x0_blizzard_init() 0 +#endif ++ ++extern void n8x0_usb_init(void); + static void __init n8x0_init_machine(void) { @@ -332,10 +431,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c n8x0_onenand_init(); n8x0_mmc_init(); n8x0_usb_init(); -Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c 2010-08-08 12:56:31.000000000 +0200 +--- /dev/null ++++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-lcd.c @@ -0,0 +1,127 @@ +/* + * linux/arch/arm/mach-omap2/board-n8x0.c @@ -464,10 +561,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c + + printk(KERN_INFO "N8x0 Blizzard initialized"); +} -Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c 2010-08-08 12:56:31.000000000 +0200 +--- /dev/null ++++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-usb.c @@ -0,0 +1,175 @@ +/* + * linux/arch/arm/mach-omap2/board-n8x0-usb.c @@ -644,10 +739,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c +err: + gpio_free(GPIO_TUSB_ENABLE); +} -Index: linux-2.6.35/arch/arm/mach-omap2/control.c -=================================================================== ---- linux-2.6.35.orig/arch/arm/mach-omap2/control.c 2010-08-08 12:56:15.000000000 +0200 -+++ linux-2.6.35/arch/arm/mach-omap2/control.c 2010-08-08 12:56:32.000000000 +0200 +--- linux-2.6.35.3.orig/arch/arm/mach-omap2/control.c ++++ linux-2.6.35.3/arch/arm/mach-omap2/control.c @@ -162,6 +162,7 @@ u16 omap_ctrl_readw(u16 offset) return __raw_readw(OMAP_CTRL_REGADDR(offset)); } @@ -664,10 +757,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/control.c void omap_ctrl_writel(u32 val, u16 offset) { __raw_writel(val, OMAP_CTRL_REGADDR(offset)); -Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig -=================================================================== ---- linux-2.6.35.orig/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:15.000000000 +0200 -+++ linux-2.6.35/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:33.000000000 +0200 +--- linux-2.6.35.3.orig/arch/arm/mach-omap2/Kconfig ++++ linux-2.6.35.3/arch/arm/mach-omap2/Kconfig @@ -116,6 +116,16 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX @@ -685,10 +776,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 -Index: linux-2.6.35/arch/arm/mach-omap2/Makefile -=================================================================== ---- linux-2.6.35.orig/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:15.000000000 +0200 -+++ linux-2.6.35/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:33.000000000 +0200 +--- linux-2.6.35.3.orig/arch/arm/mach-omap2/Makefile ++++ linux-2.6.35.3/arch/arm/mach-omap2/Makefile @@ -116,6 +116,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += boar hsmmc.o \ board-sdp-flash.o @@ -698,10 +787,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/Makefile obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-sdram.o \ board-rx51-peripherals.o \ -Index: linux-2.6.35/arch/arm/mach-omap2/serial.c -=================================================================== ---- linux-2.6.35.orig/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:15.000000000 +0200 -+++ linux-2.6.35/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:34.000000000 +0200 +--- linux-2.6.35.3.orig/arch/arm/mach-omap2/serial.c ++++ linux-2.6.35.3/arch/arm/mach-omap2/serial.c @@ -495,10 +495,10 @@ static void omap_uart_idle_init(struct o uart->padconf = 0; } -- cgit v1.2.3