From a95f9f92e2953d5829a29e95644dc4c4bc93f590 Mon Sep 17 00:00:00 2001 From: mirko Date: Sat, 13 Dec 2008 01:54:56 +0000 Subject: change prefix for kernelpatchbase 2.6.26 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13619 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- ...-PATCH-Hardware-glamo-fb-cursor-some-clea.patch | 280 +++++++++++++++++++++ 1 file changed, 280 insertions(+) create mode 100755 target/linux/s3c24xx/patches-2.6.26/1151-Subject-PATCH-Hardware-glamo-fb-cursor-some-clea.patch (limited to 'target/linux/s3c24xx/patches-2.6.26/1151-Subject-PATCH-Hardware-glamo-fb-cursor-some-clea.patch') diff --git a/target/linux/s3c24xx/patches-2.6.26/1151-Subject-PATCH-Hardware-glamo-fb-cursor-some-clea.patch b/target/linux/s3c24xx/patches-2.6.26/1151-Subject-PATCH-Hardware-glamo-fb-cursor-some-clea.patch new file mode 100755 index 0000000000..2ba8c2b2bd --- /dev/null +++ b/target/linux/s3c24xx/patches-2.6.26/1151-Subject-PATCH-Hardware-glamo-fb-cursor-some-clea.patch @@ -0,0 +1,280 @@ +From 824fc22a0aaacf942eb3b3dfa6aad32c7285669f Mon Sep 17 00:00:00 2001 +From: Andrzej Zaborowski +Date: Fri, 25 Jul 2008 23:06:11 +0100 +Subject: [PATCH] Subject: [PATCH] Hardware glamo-fb cursor, some clean-up. + +--- + drivers/mfd/glamo/glamo-fb.c | 105 +++++++++++++++++++++-------------------- + include/linux/fb.h | 1 + + 2 files changed, 55 insertions(+), 51 deletions(-) + +diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c +index edc6d9c..30cdb38 100644 +--- a/drivers/mfd/glamo/glamo-fb.c ++++ b/drivers/mfd/glamo/glamo-fb.c +@@ -117,6 +117,8 @@ static struct glamo_script glamo_regs[] = { + * 01 00 0 100 0 000 01 0 0 */ + { GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */ + { GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */ ++ { GLAMO_REG_LCD_CURSOR_BASE1, 0x0000 }, /* cursor base address 15:0 */ ++ { GLAMO_REG_LCD_CURSOR_BASE2, 0x000f }, /* cursor base address 22:16 */ + }; + + static int glamofb_run_script(struct glamofb_handle *glamo, +@@ -200,7 +202,6 @@ static int glamofb_check_var(struct fb_var_screeninfo *var, + printk(KERN_ERR + "Smedia driver does not [yet?] support 24/32bpp\n"); + return -EINVAL; +- break; + } + + return 0; +@@ -497,22 +498,19 @@ static int glamofb_setcolreg(unsigned regno, + return 0; + } + ++#ifdef CONFIG_MFD_GLAMO_HWACCEL + static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor) + { + struct glamofb_handle *glamo = info->par; +- u_int16_t reg; ++ unsigned long flags; + + if (cursor->image.depth > 2) + return -EINVAL; + +- reg = reg_read(glamo, GLAMO_REG_LCD_MODE1); ++ spin_lock_irqsave(&glamo->lock_cmd, flags); + +- if (cursor->enable) +- reg_write(glamo, GLAMO_REG_LCD_MODE1, +- reg | GLAMO_LCD_MODE1_CURSOR_EN); +- else +- reg_write(glamo, GLAMO_REG_LCD_MODE1, +- reg & ~GLAMO_LCD_MODE1_CURSOR_EN); ++ reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1, ++ GLAMO_LCD_MODE1_CURSOR_EN, 0); + + if (cursor->set & FB_CUR_SETPOS) { + reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS, +@@ -522,29 +520,36 @@ static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor) + } + + if (cursor->set & FB_CUR_SETCMAP) { +- /* FIXME */ ++ uint16_t fg = cursor->image.fg_color; ++ uint16_t bg = cursor->image.bg_color; ++ ++ reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg); ++ reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg); ++ reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, bg); + } + +- if (cursor->set & FB_CUR_SETSIZE || +- cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) { +- int x, y, op; ++ if (cursor->set & FB_CUR_SETHOT) ++ reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET, ++ (cursor->hot.x << 8) | cursor->hot.y); ++ ++ if ((cursor->set & FB_CUR_SETSIZE) || ++ (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) { ++ int x, y, pitch; + const unsigned char *pcol = cursor->image.data; + const unsigned char *pmsk = cursor->mask; + void __iomem *dst = glamo->cursor_addr; + unsigned char dcol = 0; + unsigned char dmsk = 0; ++ unsigned char byte = 0; + ++ pitch = (cursor->image.width + 3) >> 2; + reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, + cursor->image.width); + reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH, +- cursor->image.width * 2); ++ pitch); + reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE, + cursor->image.height); + +- for (op = 0; op < (cursor->image.width * +- cursor->image.height * 2)/8; op += 4) +- writel(0x0, dst + op); +- + for (y = 0; y < cursor->image.height; y++) { + for (x = 0; x < cursor->image.width; x++) { + if ((x % 8) == 0) { +@@ -559,15 +564,29 @@ static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor) + unsigned int op; + + op = (dcol & 1) ? 1 : 3; +- op <<= ((x % 4) * 2); ++ byte |= op << ((x % 4) * 2); ++ } + +- op |= readb(dst + (x / 4)); +- writeb(op, dst + (x / 4)); ++ if ((x % 4) == 0) { ++ writeb(byte, dst + x / 4); ++ byte = 0; + } + } ++ ++ dst += pitch; + } + } ++ ++ if (cursor->enable) ++ reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1, ++ GLAMO_LCD_MODE1_CURSOR_EN, ++ GLAMO_LCD_MODE1_CURSOR_EN); ++ ++ spin_unlock_irqrestore(&glamo->lock_cmd, flags); ++ ++ return 0; + } ++#endif + + static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb) + { +@@ -576,15 +595,14 @@ static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb) + } + + /* call holding gfb->lock_cmd when locking, until you unlock */ +- + int glamofb_cmd_mode(struct glamofb_handle *gfb, int on) + { + int timeout = 200000; + +-/* dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on); */ ++ dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on); + if (on) { +-/* dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ", +- __FUNCTION__); */ ++ dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ", ++ __FUNCTION__); + while ((!glamofb_cmdq_empty(gfb)) && (timeout--)) + yield(); + if (timeout < 0) { +@@ -593,7 +611,7 @@ int glamofb_cmd_mode(struct glamofb_handle *gfb, int on) + "*************\n"); + return -EIO; + } +-/* dev_dbg(gfb->dev, "empty!\n"); */ ++ dev_dbg(gfb->dev, "empty!\n"); + + /* display the entire frame then switch to command */ + reg_write(gfb, GLAMO_REG_LCD_COMMAND1, +@@ -601,7 +619,7 @@ int glamofb_cmd_mode(struct glamofb_handle *gfb, int on) + GLAMO_LCD_CMD_DATA_FIRE_VSYNC); + + /* wait until LCD is idle */ +-/* dev_dbg(gfb->dev, "waiting for LCD idle: "); */ ++ dev_dbg(gfb->dev, "waiting for LCD idle: "); + timeout = 200000; + while ((!reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) && + (timeout--)) +@@ -612,7 +630,7 @@ int glamofb_cmd_mode(struct glamofb_handle *gfb, int on) + "*************\n"); + return -EIO; + } +-/* dev_dbg(gfb->dev, "idle!\n"); */ ++ dev_dbg(gfb->dev, "idle!\n"); + + mdelay(100); + } else { +@@ -635,8 +653,7 @@ int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val) + { + int timeout = 200000; + +-/* dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", +- __FUNCTION__); */ ++ dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __FUNCTION__); + while ((!glamofb_cmdq_empty(gfb)) && (timeout--)) + yield(); + if (timeout < 0) { +@@ -645,7 +662,7 @@ int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val) + "*************\n"); + return 1; + } +-/* dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val); */ ++ dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val); + + reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val); + +@@ -659,7 +676,9 @@ static struct fb_ops glamofb_ops = { + .fb_set_par = glamofb_set_par, + .fb_blank = glamofb_blank, + .fb_setcolreg = glamofb_setcolreg, +- //.fb_cursor = glamofb_cursor, ++#ifdef CONFIG_MFD_GLAMO_HWACCEL ++ .fb_cursor = glamofb_cursor, ++#endif + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +@@ -743,6 +762,7 @@ static int __init glamofb_probe(struct platform_device *pdev) + dev_err(&pdev->dev, "failed to ioremap() vram memory\n"); + goto out_release_fb; + } ++ glamofb->cursor_addr = fbinfo->screen_base + 0xf0000; + + platform_set_drvdata(pdev, fbinfo); + +@@ -754,13 +774,13 @@ static int __init glamofb_probe(struct platform_device *pdev) + fbinfo->fix.xpanstep = 0; + fbinfo->fix.ypanstep = 0; + fbinfo->fix.ywrapstep = 0; +- fbinfo->fix.accel = FB_ACCEL_NONE; /* FIXME */ ++ fbinfo->fix.accel = FB_ACCEL_GLAMO; + + fbinfo->var.nonstd = 0; + fbinfo->var.activate = FB_ACTIVATE_NOW; + fbinfo->var.height = mach_info->height; + fbinfo->var.width = mach_info->width; +- fbinfo->var.accel_flags = 0; ++ fbinfo->var.accel_flags = 0; /* FIXME */ + fbinfo->var.vmode = FB_VMODE_NONINTERLACED; + + fbinfo->fbops = &glamofb_ops; +@@ -833,26 +853,9 @@ static int glamofb_remove(struct platform_device *pdev) + return 0; + } + +-#ifdef CONFIG_PM +-static int glamofb_suspend(struct platform_device *pdev, pm_message_t state) +-{ +- return 0; +-} +- +-static int glamofb_resume(struct platform_device *pdev) +-{ +- return 0; +-} +-#else +-#define glamofb_suspend NULL +-#define glamofb_resume NULL +-#endif +- + static struct platform_driver glamofb_driver = { + .probe = glamofb_probe, + .remove = glamofb_remove, +- .suspend = glamofb_suspend, +- .resume = glamofb_resume, + .driver = { + .name = "glamo-fb", + .owner = THIS_MODULE, +diff --git a/include/linux/fb.h b/include/linux/fb.h +index 72295b0..1df1225 100644 +--- a/include/linux/fb.h ++++ b/include/linux/fb.h +@@ -120,6 +120,7 @@ struct dentry; + #define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */ + #define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */ + #define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */ ++#define FB_ACCEL_GLAMO 50 /* SMedia Glamo */ + #define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */ + #define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */ + #define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */ +-- +1.5.6.3 + -- cgit v1.2.3