From a88314062beef46383dd1a4e1360d87ab06e3e46 Mon Sep 17 00:00:00 2001 From: juhosg Date: Sun, 4 Mar 2012 16:09:13 +0000 Subject: ramips: add support for unbranded XDX-RN502J board This patch adds support for routers using a PCB marked XDX-RN502J V2.0, such as some unbranded routers like this: http://www.mediafire.com/?8acv87h6snn9fj6 http://www.mediafire.com/?do7xonw7scor4kn http://www.mediafire.com/?1ad49zvx3e7jyix http://www.mediafire.com/?i46cqiq66maa197 http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html some reports also state the Aceex 22Y uses the same board. more information can be found in the following openwrt forum post https://forum.openwrt.org/viewtopic.php?id=34878 [juhosg: fix checkpatch warnings, use the GENERIC_4M template] Signed-off-by: bruno schwander git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30809 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/base-files/etc/diag.sh | 3 +++ target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom | 3 ++- target/linux/ramips/base-files/lib/preinit/06_set_iface_mac | 3 ++- target/linux/ramips/base-files/lib/ramips.sh | 3 +++ 4 files changed, 10 insertions(+), 2 deletions(-) (limited to 'target/linux/ramips/base-files') diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 0a13ddb8c6..f8dac497d6 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -99,6 +99,9 @@ get_status_led() { wr512-3gn) status_led="wr512:green:wps" ;; + xdxrn502j) + status_led="xdxrn502j:green:power" + ;; esac } diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 148fda20ce..bc23208575 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -70,7 +70,8 @@ case "$FIRMWARE" in wl-351 | \ wli-tx4-ag300n | \ wr512-3gn | \ - wr6202) + wr6202 | \ + xdxrn502j) rt2x00_eeprom_extract "factory" 0 272 ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index cb9c7abd1b..97cacfa5ee 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -28,7 +28,8 @@ preinit_set_mac_address() { nbg-419n |\ omni-emb |\ w502u |\ - wr6202) + wr6202 |\ + xdxrn502j) mac=$(ramips_get_mac_binary factory 40) ifconfig eth0 hw ether $mac 2>/dev/null ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 35672092b7..faa2485365 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -143,6 +143,9 @@ ramips_board_name() { *"AWB WR6202") name="wr6202" ;; + *"XDX RN502J") + name="xdxrn502j" + ;; *) name="generic" ;; -- cgit v1.2.3