From da5f3d25a76d1e0b3063f3ef5fe229e179e8bf5e Mon Sep 17 00:00:00 2001 From: mbm Date: Wed, 31 Jan 2007 00:11:27 +0000 Subject: basic pxa support; likely broken git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6232 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/pxa-2.6/patches/001-pm.patch | 869 ++++++++++++++++++++++++++++++ 1 file changed, 869 insertions(+) create mode 100644 target/linux/pxa-2.6/patches/001-pm.patch (limited to 'target/linux/pxa-2.6/patches/001-pm.patch') diff --git a/target/linux/pxa-2.6/patches/001-pm.patch b/target/linux/pxa-2.6/patches/001-pm.patch new file mode 100644 index 0000000000..799b9bd536 --- /dev/null +++ b/target/linux/pxa-2.6/patches/001-pm.patch @@ -0,0 +1,869 @@ +diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/pm.c linux-2.6.17-patched/arch/arm/mach-pxa/pm.c +--- linux-2.6.17/arch/arm/mach-pxa/pm.c 2006-06-17 18:49:35.000000000 -0700 ++++ linux-2.6.17-patched/arch/arm/mach-pxa/pm.c 2006-09-11 10:58:41.000000000 -0700 +@@ -10,35 +10,50 @@ + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License. + */ ++ + #include + #include +-#include +-#include ++#include ++#include ++#include ++#include ++#include + #include +-#include + + #include + #include + #include +-#include ++#include ++#include + #include + #include + #include + ++/**/ ++#include ++/**/ ++//kirti ++#include ++//kirti~ + + /* + * Debug macros + */ +-#undef DEBUG ++#define DEBUG ++ ++extern void pxa_cpu_suspend(void); ++extern void pxa_cpu_resume(void); ++ ++int pm_pwronoff; ++/*Angelia Additions */ ++int pm_pedr=0; ++EXPORT_SYMBOL(pm_pwronoff); ++EXPORT_SYMBOL(pm_pedr); ++ + + #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x + #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] + +-#define RESTORE_GPLEVEL(n) do { \ +- GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \ +- GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \ +-} while (0) +- + /* + * List of global PXA peripheral registers to preserve. + * More ones like CP and general purpose register values are preserved +@@ -46,97 +61,405 @@ + */ + enum { SLEEP_SAVE_START = 0, + +- SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3, +- SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3, +- SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3, +- SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3, +- SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3, +- +- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U, +- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U, +- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U, +- SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U, ++ SLEEP_SAVE_OSCR, SLEEP_SAVE_OIER, ++ SLEEP_SAVE_OSMR0, SLEEP_SAVE_OSMR1, SLEEP_SAVE_OSMR2, SLEEP_SAVE_OSMR3, + +- SLEEP_SAVE_PSTR, ++ SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, ++ SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, ++ SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, ++ SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR2_L, ++ SLEEP_SAVE_GAFR0_U, SLEEP_SAVE_GAFR1_U, SLEEP_SAVE_GAFR2_U, ++ ++ SLEEP_SAVE_FFIER, SLEEP_SAVE_FFLCR, SLEEP_SAVE_FFMCR, ++ SLEEP_SAVE_FFSPR, SLEEP_SAVE_FFISR, ++ SLEEP_SAVE_FFDLL, SLEEP_SAVE_FFDLH,SLEEP_SAVE_FFFCR, ++ ++ SLEEP_SAVE_STIER, SLEEP_SAVE_STLCR, SLEEP_SAVE_STMCR, ++ SLEEP_SAVE_STSPR, SLEEP_SAVE_STISR, ++ SLEEP_SAVE_STDLL, SLEEP_SAVE_STDLH, ++ ++ SLEEP_SAVE_BTIER, SLEEP_SAVE_BTLCR, SLEEP_SAVE_BTMCR, ++ SLEEP_SAVE_BTSPR, SLEEP_SAVE_BTISR, ++ SLEEP_SAVE_BTDLL, SLEEP_SAVE_BTDLH, + + SLEEP_SAVE_ICMR, + SLEEP_SAVE_CKEN, + +-#ifdef CONFIG_PXA27x +- SLEEP_SAVE_MDREFR, +- SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER, +- SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR, +-#endif ++ SLEEP_SAVE_LCCR0, SLEEP_SAVE_LCCR1, SLEEP_SAVE_LCCR2,SLEEP_SAVE_LCCR3, ++ SLEEP_SAVE_TMEDCR, SLEEP_SAVE_FDADR0, SLEEP_SAVE_FSADR0,SLEEP_SAVE_FIDR0,SLEEP_SAVE_FDADR1, ++ SLEEP_SAVE_LDCMD0, ++ ++ SLEEP_SAVE_NSSCR0,SLEEP_SAVE_NSSCR1,SLEEP_SAVE_NSSSR,SLEEP_SAVE_NSSITR,SLEEP_SAVE_NSSDR, ++ SLEEP_SAVE_NSSTO,SLEEP_SAVE_NSSPSP, + +- SLEEP_SAVE_CKSUM, + ++ SLEEP_SAVE_CKSUM, + SLEEP_SAVE_SIZE + }; + ++/**/ ++#define UART_DTR 1 ++#define UART_RTS 2 ++ ++/**/ + +-int pxa_pm_enter(suspend_state_t state) ++int pm_do_suspend(void) + { + unsigned long sleep_save[SLEEP_SAVE_SIZE]; + unsigned long checksum = 0; +- struct timespec delta, rtc; + int i; ++ int valbefore,valafter,valafter1; ++ int gpsr0,gpsr1,gpsr2; + extern void pxa_cpu_pm_enter(suspend_state_t state); + +-#ifdef CONFIG_IWMMXT +- /* force any iWMMXt context to ram **/ +- iwmmxt_task_disable(NULL); +-#endif ++ // YoKu 16Feb06 GPIO Changed -----> ++ ++ PGSR2 |= GPIO_bit(78); ++/* if(GPLR2 & GPIO_bit(78)) // LCD Reset Pin ++ PGSR2 |= GPIO_bit(78); ++ else ++ PGSR2 &= ~GPIO_bit(78); */ ++ GPDR0 &= ~GPIO_bit(0); ++ GPDR0 &= ~GPIO_bit(1); ++ GPDR0 &= ~GPIO_bit(3); //Tushar: 20 apr GPIO3 configured as input ++ GPDR0 &= ~GPIO_bit(2); ++// GPDR0 &= ~GPIO_bit(5); ++// GPDR0 &= ~GPIO_bit(6); ++// GPDR0 &= ~GPIO_bit(7); ++// GPDR0 &= ~GPIO_bit(8); ++ ++ ++// KeyCol pin Status in sleep mode ++ PGSR0 &= ~GPIO_bit(9); //19 ++ PGSR0 &= ~GPIO_bit(10); //20 ++ PGSR0 &= ~GPIO_bit(11); //21 ++ PGSR0 &= ~GPIO_bit(12); //22 ++ PGSR0 &= ~GPIO_bit(13); //23 ++ PGSR0 &= ~GPIO_bit(14); //24 ++ ++ printk("KER_PM: Setting up wakeup sources 26May06\n"); ++ ++ // KeyPad ++ //printk("KER_PM: Uncommented key pad wakeup sources\n"); ++ PWER |= GPIO_bit(5); //11 ++ PWER |= GPIO_bit(6); //12 ++ PWER |= GPIO_bit(7); //13 ++ PWER |= GPIO_bit(8); //14 ++ PFER |= GPIO_bit(5); //11 ++ PFER |= GPIO_bit(6); //12 ++ PFER |= GPIO_bit(7); //13 ++ PFER |= GPIO_bit(8); //14 ++ PRER |= GPIO_bit(5); //11 ++ PRER |= GPIO_bit(6); //12 ++ PRER |= GPIO_bit(7); //13 ++ PRER |= GPIO_bit(8); //14 ++ ++ // USB ++ PWER |= GPIO_bit(3); //6 ++ PFER |= GPIO_bit(3); //6 ++ PRER |= GPIO_bit(3); //6 ++ ++ // PMU ++ PWER |= GPIO_bit(2); //4 ++ PFER |= GPIO_bit(2); //4 ++ PRER |= GPIO_bit(2); //4 ++ ++ // Anup : GSM RI ++ PWER |= GPIO_bit(0); //0 ++ PFER |= GPIO_bit(0); //0 ++ PRER |= GPIO_bit(0); //0 ++ // anup prashant : for gsm reset problem 19 may 2006 ++ //GPDR0 |= GPIO_bit(18); YoKu Commented this line, GPIO18 should be i/p pin to avoid GSM Reset pulse ++ PGSR0 |= GPIO_bit(18); // GSM reset pin ++ PGSR0 |= GPIO_bit(0); // ++ PGSR1 |= GPIO_bit(38); // commneted .18 apr ++ // <----- YoKu ++ ++ // YoKu -----> ++ // When exiting from sleep mode, 10us Low pulse comes on GSM Reset and Pwr pin ++ // to avoid this configure GPIO 18,80 as input pins before going to sleep mode ++ GPDR0 &= ~GPIO_bit(18); ++ //GPDR2 &= ~GPIO_bit(80); ++ // <----- YoKu ++ ++ //kirti for RTC ++ PWER |= PWER_RTC; ++ //kirti cli(); ++ local_irq_disable(); ++ //kirti clf(); ++ local_fiq_disable(); ++ leds_event(led_stop); ++ ++ /* Put Current time into RCNR */ ++ RCNR = xtime.tv_sec; + +- /* preserve current time */ +- rtc.tv_sec = RCNR; +- rtc.tv_nsec = 0; +- save_time_delta(&delta, &rtc); ++ printk("11May2006 KERR: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2); ++ printk("KER_PM_DELAY: SSCR Going to Sleep at RCNR =%d\n\n\n\n\n\n",RCNR); ++ ++ /* ++ * Temporary solution. This won't be necessary once ++ * we move pxa support into the serial driver ++ * Save the FF UART ++ */ ++ ++ // Anup : commented for power saving mode problem ++ printk("\nPM: Why doesnt it prnt?? 26May06\n"); ++ printk("\nPM : GSM Sleep Mode enabled"); ++ ++ ++ FFMCR &= ~UART_RTS; ++ udelay(2000); ++ udelay(2000); ++ FFMCR &= ~UART_DTR ; ++ udelay(2000); ++ ++ udelay(2000); ++ // rupali ++ // Anup : Do not check here ++/* if(!pm_pwronoff) ++ { ++ printk("\nPM : Modem Control Register = %x " , FFMCR); ++ while( FFMSR & 0x00000020) ++ { ++ printk("\nPM : FFFSR = %x " , FFMSR); ++ } ++ } */ ++ udelay(2000); ++ ++//Tushar: 19 apr ++// NSSCR0 &= 0xFFFFFF7F; ++// printk("\nPM: NSSCR0 = %x" ,NSSCR0 ); ++ ++ SAVE(FFIER); ++ SAVE(FFLCR); ++ SAVE(FFMCR); ++ SAVE(FFSPR); ++ SAVE(FFISR); ++ FFLCR |= 0x80; ++ SAVE(FFDLL); ++ SAVE(FFDLH); ++ SAVE(FFFCR); ++ FFLCR &= 0xef; ++ ++ SAVE(STIER); ++ SAVE(STLCR); ++ SAVE(STMCR); ++ SAVE(STSPR); ++ SAVE(STISR); ++ STLCR |= 0x80; ++ SAVE(STDLL); ++ SAVE(STDLH); ++ STLCR &= 0xef; ++ ++ SAVE(BTIER); ++ SAVE(BTLCR); ++ SAVE(BTMCR); ++ SAVE(BTSPR); ++ SAVE(BTISR); ++ BTLCR |= 0x80; ++ SAVE(BTDLL); ++ SAVE(BTDLH); ++ BTLCR &= 0xef; ++ ++ /* save vital registers */ ++ SAVE(OSCR); ++ SAVE(OSMR0); ++ SAVE(OSMR1); ++ SAVE(OSMR2); ++ SAVE(OSMR3); ++ SAVE(OIER); + +- SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); + SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); + SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); + SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); +- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); +- + SAVE(GAFR0_L); SAVE(GAFR0_U); + SAVE(GAFR1_L); SAVE(GAFR1_U); + SAVE(GAFR2_L); SAVE(GAFR2_U); + +-#ifdef CONFIG_PXA27x +- SAVE(MDREFR); +- SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3); +- SAVE(GAFR3_L); SAVE(GAFR3_U); +- SAVE(PWER); SAVE(PCFR); SAVE(PRER); +- SAVE(PFER); SAVE(PKWR); +-#endif ++ // YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 -----> ++ SAVE(LCCR0); SAVE(LCCR1); SAVE(LCCR2); SAVE(LCCR3); ++ SAVE(FDADR0); ++ SAVE(FDADR1); ++ LCSR = 0xffffffff; /* Clear LCD Status Register */ ++ ++// LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ ++// LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */ ++ ++ SAVE(LDCMD0); ++ // <----- YoKu ++ ++// LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ ++// LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */ ++ + + SAVE(ICMR); + ICMR = 0; + + SAVE(CKEN); +- SAVE(PSTR); ++ CKEN = 0; ++ ++ // Anup : For Wifi power saving mode 2 May 2006 ++ SAVE(NSSCR0);SAVE(NSSCR1);SAVE(NSSSR);SAVE(NSSITR);SAVE(NSSDR);SAVE(NSSTO); ++ SAVE(NSSPSP); ++ printk("\nMY favourite mode in life.......sleep.....\n"); ++ + + /* Note: wake up source are set up in each machine specific files */ + ++ /*Changes to keep the right sim selected */ ++ gpsr0 = GPLR0; ++ gpsr1 = GPLR1; ++ gpsr2 = GPLR2; ++ ++ /*Sim 1 selected */ ++ // YoKu GPIOs Changed -----> ++ if( (GPLR0 & GPIO_bit(21)) && !(GPLR0 & GPIO_bit(22)) ) // 62,63 ++ { ++ PGSR0 |= GPIO_bit(21) ; //62 ++ PGSR0 &= ~GPIO_bit(22) ; //63 ++ } ++ else if (!(GPLR0 & GPIO_bit(21)) && (GPLR0 & GPIO_bit(22)) ) // 62,63 ++ { ++ PGSR0 |= GPIO_bit(22) ; //63 ++ PGSR0 &= ~GPIO_bit(21) ; //62 ++ } /* sim 2*/ ++ // <----- YoKu ++ + /* clear GPIO transition detect bits */ + GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; +-#ifdef CONFIG_PXA27x +- GEDR3 = GEDR3; +-#endif + + /* Clear sleep reset status */ + RCSR = RCSR_SMR; + ++ /* set resume return address */ ++ PSPR = virt_to_phys(pxa_cpu_resume); ++ + /* before sleeping, calculate and save a checksum */ + for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) + checksum += sleep_save[i]; + sleep_save[SLEEP_SAVE_CKSUM] = checksum; + +- /* *** go zzz *** */ +- pxa_cpu_pm_enter(state); ++ PGSR0 |= GPIO_bit(15); //sidd for wake from Sleep 15, YoKu Comented ?? GPIO15 was ChipSelect ++ PGSR2 |= GPIO_bit(80); //sidd for GSM Engine 69, YoKu GPIO Changed Anup :commented ++ ++ PGSR1 &= ~GPIO_bit(33); //Tushar: BT Codec Power Down ++ ++ PGSR0 &= ~GPIO_bit(23); //Tushar: BGW200 Regulator OFF ++ ++// GPDR1 |= GPIO_bit(49); //Tushar: LCD Serial Data in changed to O/P ++ ++// PGSR1 &= ~GPIO_bit(48);//Tushar: LCD Serial Pins ++ ++// PGSR1 &= ~GPIO_bit(49); ++ ++// PGSR1 &= ~GPIO_bit(50); ++ ++// PGSR1 |= GPIO_bit(51); ++ ++// PGSR1 &= 0x03FFFFFF;//Tushar: 24apr LCD datalines ++// PGSR2 &= 0xFFFFFC00; ++ ++ PGSR0 &= ~GPIO_bit(24); //Tushar: Mux Control Signals ++ ++ PGSR0 &= ~GPIO_bit(25); ++ ++ PGSR0 &= ~GPIO_bit(26); ++ ++ PGSR0 &= ~GPIO_bit(27); ++ ++ // GPDR0 |= GPIO_bit(17); //Tushar: unused GPIOs 19apr ++ // GPCR0 |= GPIO_bit(17); ++ PGSR0 &= ~GPIO_bit(17); ++ ++// GPDR1 |= GPIO_bit(56); //Tushar: unused GPIOs 19apr ++ // GPCR1 |= GPIO_bit(56); ++ PGSR1 &= ~GPIO_bit(56); ++ ++// GPDR2 |= GPIO_bit(79);//Tushar: unused GPIOs 19apr ++// GPCR2 |= GPIO_bit(79); ++ PGSR2 &= ~GPIO_bit(79); ++ ++// GPDR1 |= 0x03F00000;//Tushar: unused GPIOs 19apr ++// GPCR1 |= 0x03F00000; ++ PGSR1 &= 0xFC0FFFFF; ++ ++ ++ GPDR0 |= GPIO_bit(19);//Tushar: SIM Present Inputs configured as outputs ++ GPDR0 |= GPIO_bit(20); ++ PGSR0 &= ~GPIO_bit(19); ++ PGSR0 &= ~GPIO_bit(20); ++ ++ ++//Tushar: 25apr FFRTS FFDTR & FFTXD ++ ++ PGSR1 |= GPIO_bit(39); ++ PGSR1 |= GPIO_bit(40); ++ PGSR1 |= GPIO_bit(41); ++/* ++ PGSR2 &= GPIO_bit(81); //Tushar: 24apr NSSP pins ++ PGSR2 &= GPIO_bit(82); ++ PGSR2 &= GPIO_bit(83); ++ ++ PGSR2 |= GPIO_bit(74); ++ PGSR2 |= GPIO_bit(75); ++ PGSR2 |= GPIO_bit(76); ++ PGSR2 |= GPIO_bit(77); ++*/ ++ if(pm_pwronoff) ++ { ++ /* We are here bcos of pressing of on off switch ++ We wake up now only on pwr switch */ ++ printk("Anup: Before sleeping \n"); ++ pm_pwronoff = 0; ++ PGSR0 &= ~GPIO_bit(23); //7 YoKu GPIO Changed ++ //PGSR2 &= ~GPIO_bit(64); //64 YoKu Commented in PWG500 64,7 was WifiReg, IN PWG600 it is 23 ++ ++ PGSR2 &= ~GPIO_bit(80); //69 YoKu GPIO Changed Anup : commnented ++ PWER = 0x0004; // YoKu Changed from 0x10 to 0x04 (i.e GPIO 4 -> 2) ++ PFER = 0x0004; ++ PRER = 0x0004; ++ ++// YoKu ----> ++// 11May2006 To reduce Power Off current from 7mA to 4mA ++ GPDR0 |= GPIO_bit(16); // BTReset o/p Low ++ PGSR0 &= ~GPIO_bit(16); ++ ++ GPDR1 |= GPIO_bit(33); // nMEC/nPDI o/p Low ++ PGSR1 &= ~GPIO_bit(33); ++ ++ GPDR1 |= GPIO_bit(45); // BTRTS o/p High ++ PGSR1 |= GPIO_bit(45); ++ ++ ++ GPDR1 |= GPIO_bit(43); // BTTXD o/p High ++ PGSR1 |= GPIO_bit(43); ++ ++ GPDR1 &= ~GPIO_bit(42); // BTRXD i/p ++ GPDR1 &= ~GPIO_bit(44); // BTCTS i/p ++// <---- YoKu ++ ++ PSPR = virt_to_phys(pxa_cpu_resume); // YoKu 29July05 to Resume from where u left, Original PSPR = 0 ++ } ++ ++ valbefore = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; // 62,63 YoKu GPIO Changed ++ ++ //printk("Anup: Before sleeping gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2); ++ //kirti pxa_cpu_suspend(); ++ //printk("KER_PM: Going to sleep zzzzzzzzz\n"); ++ ++// OSCC |= OSCC_OON; //Tushar: 18 apr. enable 32.768KHz Oscillator ++ ++// PCFR |= PCFR_OPDE; //Tushar: 18 apr. disable 3.6864MHz oscillator ++ ++ pxa_cpu_pm_enter(PM_SUSPEND_MEM); + + cpu_init(); + ++ //kirti~ ++ /**/ ++ //FFMCR |= UART_DTR ; ++ /**/ ++ + /* after sleeping, validate the checksum */ + checksum = 0; + for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) +@@ -141,39 +464,63 @@ + checksum = 0; + for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++) + checksum += sleep_save[i]; +- + /* if invalid, display message and wait for a hardware reset */ +- if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) { ++ if (checksum != sleep_save[SLEEP_SAVE_CKSUM]) ++ { + #ifdef CONFIG_ARCH_LUBBOCK + LUB_HEXLED = 0xbadbadc5; + #endif + while (1) +- pxa_cpu_pm_enter(state); ++ { ++ printk("\n\n\nKERN_PM: CRC Error!!! after wakeup\n\n\n"); // YoKu 25May06 ++ + } + ++ } ++ valafter = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; //62,63 YoKu GPIO Changed ++ pm_pedr = PEDR ; ++ + /* ensure not to come back here if it wasn't intended */ + PSPR = 0; + ++ /*printk("YoKu: gafr0_L=0x%08x gafr0_U=0x%08x\n",GAFR0_L,GAFR0_U); ++ printk(" gafr1_L= 0x%08x gafr1_U= 0x%08x\n",GAFR1_L,GAFR1_U); ++ printk(" gafr2_L= 0x%08x gafr2_U= 0x%08x\n",GAFR2_L,GAFR2_U); */ + /* restore registers */ +- RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2); + RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); ++ RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); ++ RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); + RESTORE(GAFR0_L); RESTORE(GAFR0_U); + RESTORE(GAFR1_L); RESTORE(GAFR1_U); + RESTORE(GAFR2_L); RESTORE(GAFR2_U); +- RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); +- RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); +- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); + +-#ifdef CONFIG_PXA27x +- RESTORE(MDREFR); +- RESTORE_GPLEVEL(3); RESTORE(GPDR3); +- RESTORE(GAFR3_L); RESTORE(GAFR3_U); +- RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3); +- RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER); +- RESTORE(PFER); RESTORE(PKWR); +-#endif + +- PSSR = PSSR_RDH | PSSR_PH; ++ // Anup : For Wifi power saving mode 2 May 2006 ++ RESTORE(NSSCR0);RESTORE(NSSCR1);RESTORE(NSSSR);RESTORE(NSSITR);RESTORE(NSSDR);RESTORE(NSSTO); ++ RESTORE(NSSPSP); ++ ++ // PSSR = PSSR_PH; ++ GPSR0 = gpsr0; ++ GPSR1 = gpsr1; ++ GPSR2 = gpsr2; ++ ++ // Anup : check values of these registers ++// printk("YoKu: gpsr0=0x%08x gpsr1=0x%08x gpsr2= 0x%08x\n",gpsr0,gpsr1,gpsr2); ++ //sidd ++ ++ GPCR0 |= ~gpsr0; ++ GPCR1 |= ~gpsr1; ++ GPCR2 |= ~gpsr2; ++ ++ ++ PSSR = ~PSSR_PH; ++ ++ RESTORE(OSMR0); ++ RESTORE(OSMR1); ++ RESTORE(OSMR2); ++ RESTORE(OSMR3); ++ RESTORE(OSCR); ++ RESTORE(OIER); + + RESTORE(CKEN); + +@@ -181,62 +528,181 @@ + ICCR = 1; + RESTORE(ICMR); + +- RESTORE(PSTR); ++ /* ++ * Temporary solution. This won't be necessary once ++ * we move pxa support into the serial driver. ++ * Restore the FF UART. ++ */ ++ RESTORE(BTMCR); ++ RESTORE(BTSPR); ++ RESTORE(BTLCR); ++ BTLCR |= 0x80; ++ RESTORE(BTDLH); ++ RESTORE(BTDLL); ++ RESTORE(BTLCR); ++ RESTORE(BTISR); ++ BTFCR = 0xc7; ++ RESTORE(BTIER); ++ ++ RESTORE(STMCR); ++ RESTORE(STSPR); ++ RESTORE(STLCR); ++ STLCR |= 0x80; ++ RESTORE(STDLH); ++ RESTORE(STDLL); ++ RESTORE(STLCR); ++ RESTORE(STISR); ++ STFCR = 0xc7; ++ RESTORE(STIER); ++ ++ RESTORE(FFMCR); ++ RESTORE(FFSPR); ++ RESTORE(FFLCR); ++ FFLCR |= 0x80; ++ RESTORE(FFDLH); ++ RESTORE(FFDLL); ++ RESTORE(FFLCR); ++ RESTORE(FFISR); ++ RESTORE(FFFCR); ++ FFFCR = 0xc7; ++ RESTORE(FFIER); ++ ++ // YoKu 23Feb06 Added To save LCD Registers, updated by kirti 24Feb06 -----> ++ RESTORE(LCCR3); RESTORE(LCCR2); RESTORE(LCCR1); ++ LCCR0=RESTORE(LCCR0) & ~LCCR0_ENB; ++ RESTORE(FDADR0); RESTORE(FDADR1); ++ LCCR0 |= LCCR0_ENB; ++ ++ // <----- YoKu + + /* restore current time */ +- rtc.tv_sec = RCNR; +- restore_time_delta(&delta, &rtc); ++ xtime.tv_sec = RCNR; ++ ++ valafter1 = GPLR0 & (GPIO_bit(21) | GPIO_bit(22)) ; //62,63 YoKu GPIO Changed ++ ++// SSCR0 &=0xFFFFFFFF; ++// printk("\nPM : val of SSCR0 = %x " , SSCR0); ++ ++ printk("KER_PM: Resumed at RCNR = %d RTSR= %x\n",RCNR,RTSR); ++ ++ printk("YoKu: pgsr0=0x%08x pgsr1=0x%08x pgsr2= 0x%08x\n",PGSR0,PGSR1,PGSR2); ++ ++ OSMR0 = 0; /* set initial match at 0 */ ++ OSSR = 0xf; /* clear status on all timers */ ++ OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ ++ OSCR = 0; /* initialize free-running timer, force first match */ ++ ++ leds_event(led_start); ++ //kirti sti(); ++ // call i2c reset here----> ++ ICR = ICR_UR; ++ ISR = 0x7FF; //I2C_ISR_INIT; ++ ICR &= ~ICR_UR; ++ ++ ISAR = 0x32;//i2c->slave_addr; ++ ++ /* set control register values */ ++ ICR = (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE);//I2C_ICR_INIT; ++ ++ /* enable unit */ ++ ICR |= ICR_IUE; ++ udelay(100); ++ //<----- ++ ++ local_irq_enable(); + +-#ifdef DEBUG +- printk(KERN_DEBUG "*** made it back from resume\n"); +-#endif + + return 0; + } + +-EXPORT_SYMBOL_GPL(pxa_pm_enter); +- + unsigned long sleep_phys_sp(void *sp) + { + return virt_to_phys(sp); + } + ++#ifdef CONFIG_SYSCTL + /* +- * Called after processes are frozen, but before we shut down devices. ++ * ARGH! ACPI people defined CTL_ACPI in linux/acpi.h rather than ++ * linux/sysctl.h. ++ * ++ * This means our interface here won't survive long - it needs a new ++ * interface. Quick hack to get this working - use sysctl id 9999. + */ +-int pxa_pm_prepare(suspend_state_t state) +-{ +- extern int pxa_cpu_pm_prepare(suspend_state_t state); ++#warning ACPI broke the kernel, this interface needs to be fixed up. ++#define CTL_ACPI 9999 ++#define ACPI_S1_SLP_TYP 19 + +- return pxa_cpu_pm_prepare(state); ++/* ++ * Send us to sleep. ++ */ ++static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp, ++ void *buffer, size_t *lenp) ++{ ++ int retval=0; ++ unsigned i , clock ; ++ if (write) ++ { ++ char buf[16], *p; ++ unsigned int sleepsec; ++ int len,left = *lenp; ++ ++ len = left; ++ if (left > sizeof(buf)) ++ left = sizeof(buf); ++ if (!copy_from_user(buf, buffer, left)) ++ { ++ buf[sizeof(buf) - 1] = '\0'; ++ sleepsec = simple_strtoul(buf, &p, 0); ++ printk("\nSleeping %d Pwronoff=%x RCNR=%d\n",sleepsec,pm_pwronoff,RCNR); ++ printk("\nPWER %x PFER=%x PRER=%x\n",PWER,PFER,PRER); ++ RTAR = xtime.tv_sec + sleepsec; ++ printk("\nRTAR=%d \n",RTAR); ++ } ++ } ++ retval = pm_do_suspend(); ++ clock = get_memclk_frequency_10khz(); ++ return retval; + } +- +-EXPORT_SYMBOL_GPL(pxa_pm_prepare); + + /* +- * Called after devices are re-setup, but before processes are thawed. ++static struct ctl_table pm_table[] = ++{ ++ {ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&sysctl_pm_do_suspend}, ++ {0} ++}; + */ +-int pxa_pm_finish(suspend_state_t state) ++static struct ctl_table pm_table[] = + { +- return 0; ++ { ++ ctl_name: ACPI_S1_SLP_TYP, ++ procname: "suspend", ++ mode: 0600, ++ proc_handler: (proc_handler *)&sysctl_pm_do_suspend, ++ }, ++ { ++ ctl_name: 0 + } ++}; + +-EXPORT_SYMBOL_GPL(pxa_pm_finish); ++static struct ctl_table pm_dir_table[] = ++{ ++ {CTL_ACPI, "pm", NULL, 0, 0555, pm_table}, ++ {0} ++}; + + /* +- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. ++ * Initialize power interface + */ +-static struct pm_ops pxa_pm_ops = { +- .pm_disk_mode = PM_DISK_FIRMWARE, +- .prepare = pxa_pm_prepare, +- .enter = pxa_pm_enter, +- .finish = pxa_pm_finish, +-}; +- +-static int __init pxa_pm_init(void) ++static int __init pm_init(void) + { +- pm_set_ops(&pxa_pm_ops); ++ register_sysctl_table(pm_dir_table, 1); ++ /*Adi: Adjust for clock value to RTC ++ RTTR = RTC clk - 1*/ ++ RTTR = 32913; ++ + return 0; + } + +-device_initcall(pxa_pm_init); ++__initcall(pm_init); ++ ++#endif +diff -NurbwB linux-2.6.17/arch/arm/mach-pxa/sleep.S linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S +--- linux-2.6.17/arch/arm/mach-pxa/sleep.S 2006-06-17 18:49:35.000000000 -0700 ++++ linux-2.6.17-patched/arch/arm/mach-pxa/sleep.S 2006-09-11 13:07:05.000000000 -0700 +@@ -79,7 +79,7 @@ + ldr r5, [r4] + + @ enable SDRAM self-refresh mode +- orr r5, r5, #MDREFR_SLFRSH ++ orr r5, r5, #(MDREFR_SLFRSH | MDREFR_APD) + + #ifdef CONFIG_PXA27x + @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50) +diff -NurbwB linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h +--- linux-2.6.17/include/asm-arm/arch-pxa/pxa-regs.h 2006-06-17 18:49:35.000000000 -0700 ++++ linux-2.6.17-patched/include/asm-arm/arch-pxa/pxa-regs.h 2006-09-11 11:04:36.000000000 -0700 +@@ -1748,6 +1748,15 @@ + #define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL)) + #define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL)) + ++#define NSSCR0 __REG(0x41400000) /* SSP Port 1 Control Register 0 */ ++#define NSSCR1 __REG(0x41400004) /* SSP Port 1 Control Register 1 */ ++#define NSSSR __REG(0x41400008) /* SSP Port 1 Status Register */ ++#define NSSITR __REG(0x4140000C) /* SSP Port 1 Interrupt Test Register */ ++#define NSSDR __REG(0x41400010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */ ++#define NSSTO __REG(0x41400028) /* SSP Port 1 Time Out Register */ ++#define NSSPSP __REG(0x4140002C) /* SSP Port 1 Programmable Serial Port Register */ ++ ++ + /* + * MultiMediaCard (MMC) controller + */ +diff -NurbwB linux-2.6.17/kernel/power/main.c linux-2.6.17-patched/kernel/power/main.c +--- linux-2.6.17/kernel/power/main.c 2006-06-17 18:49:35.000000000 -0700 ++++ linux-2.6.17-patched/kernel/power/main.c 2006-09-11 12:59:20.000000000 -0700 +@@ -66,10 +66,12 @@ + goto Enable_cpu; + } + ++ /* + if (freeze_processes()) { + error = -EAGAIN; + goto Thaw; + } ++ */ + + if ((free_pages = nr_free_pages()) < FREE_PAGE_NUMBER) { + pr_debug("PM: free some memory\n"); +@@ -110,12 +112,15 @@ + + local_irq_save(flags); + ++ /* + if ((error = device_power_down(PMSG_SUSPEND))) { + printk(KERN_ERR "Some devices failed to power down\n"); + goto Done; + } ++ */ ++ + error = pm_ops->enter(state); +- device_power_up(); ++ //device_power_up(); + Done: + local_irq_restore(flags); + return error; -- cgit v1.2.3