From 642064ae9a94b47054ea7fb39804776ae11fbc4e Mon Sep 17 00:00:00 2001 From: kaloz Date: Wed, 21 Jul 2010 11:20:53 +0000 Subject: add support for the Gateworks Laguna family (Cavium Networks Econa CNS3xxx) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22323 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches-2.6.31/207-cns3xxx_spi_support.patch | 1071 ++++++++++++++++++++ 1 file changed, 1071 insertions(+) create mode 100644 target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch (limited to 'target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch') diff --git a/target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch b/target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch new file mode 100644 index 0000000000..5556010b06 --- /dev/null +++ b/target/linux/cns3xxx/patches-2.6.31/207-cns3xxx_spi_support.patch @@ -0,0 +1,1071 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -236,6 +236,39 @@ config SPI_XILINX + See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" + Product Specification document (DS464) for hardware details. + ++config SPI_CNS3XXX ++ tristate "CNS3XXX SPI controller" ++ depends on ARCH_CNS3XXX && SPI_MASTER && EXPERIMENTAL ++ select SPI_BITBANG ++ help ++ This enables using the CNS3XXX SPI controller in master ++ mode. ++ ++config SPI_CNS3XXX_DEBUG ++ boolean "Debug support for CNS3XXX SPI drivers" ++ depends on SPI_CNS3XXX ++ help ++ Say "yes" to enable debug messaging ++ ++config SPI_CNS3XXX_2IOREAD ++ bool "CNS3XXX SPI 2 IO Read Mode" ++ depends on SPI_CNS3XXX ++ help ++ This enables 2 IO Read Mode ++ ++config SPI_CNS3XXX_USEDMA ++ bool "CNS3XXX SPI DMA Mode" ++ depends on SPI_CNS3XXX ++ select CNS3XXX_DMAC ++ help ++ This enables DMA Mode ++ ++config SPI_CNS3XXX_USEDMA_DEBUG ++ boolean "Debug support for CNS3XXX SPI DMA drivers" ++ depends on SPI_CNS3XXX_USEDMA ++ help ++ Say "yes" to enable debug messaging ++ + # + # Add new SPI master controllers in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -32,6 +32,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x + obj-$(CONFIG_SPI_TXX9) += spi_txx9.o + obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o + obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o ++obj-$(CONFIG_SPI_CNS3XXX) += spi_cns3xxx.o + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) +--- a/drivers/spi/spi_bitbang.c ++++ b/drivers/spi/spi_bitbang.c +@@ -334,6 +334,14 @@ static void bitbang_work(struct work_str + */ + if (!m->is_dma_mapped) + t->rx_dma = t->tx_dma = 0; ++ ++#ifdef CONFIG_ARCH_CNS3XXX ++ if (t->transfer_list.next == &m->transfers) { ++ t->last_in_message_list = 1; ++ } else { ++ t->last_in_message_list = 0; ++ } ++#endif + status = bitbang->txrx_bufs(spi, t); + } + if (status > 0) +--- a/drivers/spi/spi.c ++++ b/drivers/spi/spi.c +@@ -769,6 +769,89 @@ int spi_write_then_read(struct spi_devic + } + EXPORT_SYMBOL_GPL(spi_write_then_read); + ++#ifdef CONFIG_ARCH_CNS3XXX ++/** ++ * spi_write_read_sync - SPI synchronous write & read ++ * @spi: device with which data will be exchanged ++ * @txbuf: data to be written (need not be dma-safe) ++ * @n_tx: size of txbuf, in bytes ++ * @rxbuf: buffer into which data will be read ++ * @n_rx: size of rxbuf, in bytes (need not be dma-safe) ++ * ++ * This performs a half duplex MicroWire style transaction with the ++ * device, sending txbuf and then reading rxbuf. The return value ++ * is zero for success, else a negative errno status code. ++ * This call may only be used from a context that may sleep. ++ * ++ * Parameters to this routine are always copied using a small buffer; ++ * performance-sensitive or bulk transfer code should instead use ++ * spi_{async,sync}() calls with dma-safe buffers. ++ */ ++int spi_write_read_sync(struct spi_device *spi, ++ const u8 *txbuf, unsigned n_tx, ++ u8 *rxbuf, unsigned n_rx) ++{ ++ static DECLARE_MUTEX(lock); ++ ++ int status; ++ struct spi_message message; ++ struct spi_transfer x; ++ u8 *local_buf; ++ ++ /* Use preallocated DMA-safe buffer. We can't avoid copying here, ++ * (as a pure convenience thing), but we can keep heap costs ++ * out of the hot path ... ++ */ ++#if 0 ++ while (!str8131_spi_bus_idle()){ ++ printk("spi bus is not idle \n"); // do nothing ++ } ++ while (!str8131_spi_tx_buffer_empty()){ ++ printk("spi tx buffer is not empty \n"); // do nothing ++ } ++#endif ++ if ((n_tx + n_rx) > SPI_BUFSIZ) ++ return -EINVAL; ++ spi_message_init(&message); ++ memset(&x, 0, sizeof x); ++ x.len = n_tx; ++ spi_message_add_tail(&x, &message); ++ ++ /* ... unless someone else is using the pre-allocated buffer */ ++ if (down_trylock(&lock)) { ++ local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL); ++ if (!local_buf) ++ return -ENOMEM; ++ } else ++ local_buf = buf; ++ ++ memcpy(local_buf, txbuf, n_tx); ++ x.tx_buf = local_buf; ++ x.rx_buf = local_buf + n_tx; ++ ++ /* do the i/o */ ++ status = spi_sync(spi, &message); ++ if (status == 0) { ++ memcpy(rxbuf, x.rx_buf, n_rx); ++ status = message.status; ++ } ++ ++ if (x.tx_buf == buf) ++ up(&lock); ++ else ++ kfree(local_buf); ++ ++ return status; ++} ++ ++EXPORT_SYMBOL_GPL(spi_write_read_sync); ++#endif /* CONFIG_ARCH_CNS3XXX */ ++ ++ ++ ++ ++ ++ + /*-------------------------------------------------------------------------*/ + + static int __init spi_init(void) +--- /dev/null ++++ b/drivers/spi/spi_cns3xxx.c +@@ -0,0 +1,878 @@ ++/******************************************************************************* ++ * ++ * CNS3XXX SPI controller driver (master mode only) ++ * ++ * Copyright (c) 2008 Cavium Networks ++ * ++ * This file is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License, Version 2, as ++ * published by the Free Software Foundation. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or ++ * NONINFRINGEMENT. See the GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this file; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA or ++ * visit http://www.gnu.org/licenses/. ++ * ++ * This file may also be available under a different license from Cavium. ++ * Contact Cavium Networks for more information ++ * ++ ******************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define LE8221_SPI_CS 1 ++#define SI3226_SPI_CS 1 ++ ++#define CNS3XXX_SPI_INTERRUPT ++#undef CNS3XXX_SPI_INTERRUPT /* Interrupt is not supported for D2 and SEN */ ++ ++/* ++ * define access macros ++ */ ++#define SPI_MEM_MAP_VALUE(reg_offset) (*((u32 volatile *)(CNS3XXX_SSP_BASE_VIRT + reg_offset))) ++ ++#define SPI_CONFIGURATION_REG SPI_MEM_MAP_VALUE(0x40) ++#define SPI_SERVICE_STATUS_REG SPI_MEM_MAP_VALUE(0x44) ++#define SPI_BIT_RATE_CONTROL_REG SPI_MEM_MAP_VALUE(0x48) ++#define SPI_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x4C) ++#define SPI_TRANSMIT_BUFFER_REG SPI_MEM_MAP_VALUE(0x50) ++#define SPI_RECEIVE_CONTROL_REG SPI_MEM_MAP_VALUE(0x54) ++#define SPI_RECEIVE_BUFFER_REG SPI_MEM_MAP_VALUE(0x58) ++#define SPI_FIFO_TRANSMIT_CONFIG_REG SPI_MEM_MAP_VALUE(0x5C) ++#define SPI_FIFO_TRANSMIT_CONTROL_REG SPI_MEM_MAP_VALUE(0x60) ++#define SPI_FIFO_RECEIVE_CONFIG_REG SPI_MEM_MAP_VALUE(0x64) ++#define SPI_INTERRUPT_STATUS_REG SPI_MEM_MAP_VALUE(0x68) ++#define SPI_INTERRUPT_ENABLE_REG SPI_MEM_MAP_VALUE(0x6C) ++ ++#define SPI_TRANSMIT_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x50) ++#define SPI_RECEIVE_BUFFER_REG_ADDR (CNS3XXX_SSP_BASE +0x58) ++ ++/* Structure for SPI controller of CNS3XXX SOCs */ ++struct cns3xxx_spi { ++ /* bitbang has to be first */ ++ struct spi_bitbang bitbang; ++ struct completion done; ++ wait_queue_head_t wait; ++ ++ int len; ++ int count; ++ int last_in_message_list; ++ ++ /* data buffers */ ++ const unsigned char *tx; ++ unsigned char *rx; ++ ++ struct spi_master *master; ++ struct platform_device *pdev; ++ struct device *dev; ++}; ++ ++static inline u8 cns3xxx_spi_bus_idle(void) ++{ ++ return ((SPI_SERVICE_STATUS_REG & 0x1) ? 0 : 1); ++} ++ ++static inline u8 cns3xxx_spi_tx_buffer_empty(void) ++{ ++ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 3)) ? 1 : 0); ++} ++ ++static inline u8 cns3xxx_spi_rx_buffer_full(void) ++{ ++ return ((SPI_INTERRUPT_STATUS_REG & (0x1 << 2)) ? 1 : 0); ++} ++ ++u8 cns3xxx_spi_tx_rx(u8 tx_channel, u8 tx_eof, u32 tx_data, ++ u32 * rx_data) ++{ ++ u8 rx_channel; ++ u8 rx_eof; ++ ++ while (!cns3xxx_spi_bus_idle()) ; // do nothing ++ ++ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing ++ ++ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); ++ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2); ++ ++ SPI_TRANSMIT_BUFFER_REG = tx_data; ++ ++ while (!cns3xxx_spi_rx_buffer_full()) ; // do nothing ++ ++ rx_channel = SPI_RECEIVE_CONTROL_REG & 0x3; ++ rx_eof = (SPI_RECEIVE_CONTROL_REG & (0x1 << 2)) ? 1 : 0; ++ ++ *rx_data = SPI_RECEIVE_BUFFER_REG; ++ ++ if ((tx_channel != rx_channel) || (tx_eof != rx_eof)) { ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++u8 cns3xxx_spi_tx(u8 tx_channel, u8 tx_eof, u32 tx_data) ++{ ++ ++ while (!cns3xxx_spi_bus_idle()) ; // do nothing ++ ++ while (!cns3xxx_spi_tx_buffer_empty()) ; // do nothing ++ ++ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); ++ SPI_TRANSMIT_CONTROL_REG |= (tx_channel & 0x3) | ((tx_eof & 0x1) << 2); ++ ++ SPI_TRANSMIT_BUFFER_REG = tx_data; ++ ++ return 1; ++} ++ ++ ++ ++#ifdef CONFIG_SPI_CNS3XXX_DEBUG ++static void spi_slave_probe(void) ++{ ++ int i; ++ u32 rx_data1, rx_data2, rx_data3; ++ ++ cns3xxx_spi_tx_rx(0, 0, 0x9f, &rx_data1); ++ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data1); ++ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data2); ++ cns3xxx_spi_tx_rx(0, 1, 0xff, &rx_data3); ++ printk("[SPI_CNS3XXX_DEBUG] manufacturer: %x\n", rx_data1); ++ printk("[SPI_CNS3XXX_DEBUG] device: %x\n", ++ ((rx_data2 & 0xff) << 8) | (u16) (rx_data3 & 0xff)); ++ ++ cns3xxx_spi_tx_rx(0, 0, 0x03, &rx_data1); ++ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1); ++ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1); ++ cns3xxx_spi_tx_rx(0, 0, 0x00, &rx_data1); ++ for (i = 0; i < 15; i++) { ++ cns3xxx_spi_tx_rx(0, 0, 0xff, &rx_data1); ++ printk("[SPI_CNS3XXX_DEBUG] flash[%02d]:0x%02x\n", i, ++ rx_data1 & 0xff); ++ } ++ cns3xxx_spi_tx_rx(0, 1, 0xff, &rx_data1); ++ printk("[SPI_CNS3XXX_DEBUG] flash[%02d]:0x%02x\n", i, rx_data1 & 0xff); ++} ++#else ++#define spi_slave_probe() do{}while(0) ++#endif ++ ++static inline struct cns3xxx_spi *to_hw(struct spi_device *sdev) ++{ ++ return spi_master_get_devdata(sdev->master); ++} ++ ++static int cns3xxx_spi_setup_transfer(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ return 0; ++} ++ ++static void cns3xxx_spi_chipselect(struct spi_device *spi, int value) ++{ ++ unsigned int spi_config; ++ ++ switch (value) { ++ case BITBANG_CS_INACTIVE: ++ break; ++ ++ case BITBANG_CS_ACTIVE: ++ spi_config = SPI_CONFIGURATION_REG; ++ ++ if (spi->mode & SPI_CPHA) ++ spi_config |= (0x1 << 13); ++ else ++ spi_config &= ~(0x1 << 13); ++ ++ if (spi->mode & SPI_CPOL) ++ spi_config |= (0x1 << 14); ++ else ++ spi_config &= ~(0x1 << 14); ++ ++ /* write new configration */ ++ SPI_CONFIGURATION_REG = spi_config; ++ ++ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); ++ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3); ++ ++#if defined(CONFIG_LE8221_CONTROL) ++ if (spi->chip_select == LE8221_SPI_CS) { ++ SPI_CONFIGURATION_REG |= (0x1 << 9); ++ } ++#elif defined (CONFIG_SI3226_CONTROL_API) ++ if (spi->chip_select == SI3226_SPI_CS) { ++ SPI_CONFIGURATION_REG &= ~(0x1 << 9); ++ } ++#endif ++ break; ++ } ++} ++ ++static int cns3xxx_spi_setup(struct spi_device *spi) ++{ ++ if (!spi->bits_per_word) ++ spi->bits_per_word = 8; ++ ++ return 0; ++} ++ ++#ifdef CONFIG_SPI_CNS3XXX_USEDMA ++ ++int cns3xxx_spi_dma_irq_handler(void *pdata) ++{ ++ ++ struct cns3xxx_spi *hw = pdata; ++ complete(&hw->done); ++ ++ return 0; ++} ++ ++static int cns3xxx_spi_dma_initialize(int *rxchan, int *txchan, int *rxevtno, ++ int *txevtno, void *handlerargs) ++{ ++ *rxchan = dmac_get_channel(cns3xxx_spi_dma_irq_handler, handlerargs); ++ if ((*rxchan) == -1) ++ goto fail1; ++ *txchan = dmac_get_channel(NULL, NULL); ++ if ((*txchan) == -1) ++ goto fail2; ++ *rxevtno = 9; ++ if (dmac_get_event(*rxchan, *rxevtno) == -1) ++ goto fail3; ++ *txevtno = 10; ++ if (dmac_get_event(*txchan, *txevtno) == -1) ++ goto fail4; ++ return 0; ++ ++fail4: ++ dmac_release_event(*rxchan, *rxevtno); ++fail3: ++ dmac_release_channel(*txchan); ++fail2: ++ dmac_release_channel(*rxchan); ++fail1: ++ return -1; ++} ++ ++static int cns3xxx_spi_start_dma(int rch, int tch, int rev, int tev, ++ struct spi_transfer *t, struct cns3xxx_spi *hw) ++{ ++ static void *dummy; ++ static dma_addr_t dummy_dma; ++ dma_addr_t rdma, tdma; ++ int rx_inc, tx_inc; ++ int lc0, totlps, lc1, rump; ++ u32 rx_data; ++ ++ if (!dummy) { ++ dummy = dma_alloc_coherent(NULL, 16, &dummy_dma, GFP_KERNEL); ++#ifdef CONFIG_SPI_CNS3XXX_DEBUG_DMA ++ printk("Allocated Memory for dummy buffer va:%p,pa:%x\n", dummy, ++ dummy_dma); ++#endif ++ } ++ if (!dummy) { ++ return -1; ++ } ++ *((uint32_t *) dummy) = 0xffffffff; ++ ++ (t->tx_buf) ? (tdma = t->tx_dma, tx_inc = 1) : ++ (tdma = dummy_dma, tx_inc = 0); ++ (t->rx_buf) ? (rdma = t->rx_dma, rx_inc = 1) : ++ (rdma = dummy_dma, rx_inc = 0); ++ ++#ifdef CONFIG_SPI_CNS3XXX_DEBUG_DMA ++ printk("Here with tdma %x, rdma %x\n", tdma, rdma); ++#endif ++ ++ if(t->len < 3) { ++ if(t->len == 2){ ++ cns3xxx_spi_tx_rx(0,0,(t->tx_buf) ? hw->tx[0] : 0xff ,&rx_data); ++ if(!(t->tx_buf)) ++ hw->rx[0] = rx_data & 0xff; ++ } ++ cns3xxx_spi_dma_irq_handler(hw); ++ return 0; ++ } ++ ++ ++ totlps = t->len - 1 -1; ++ if (totlps > 0x100) { ++ lc0 = 0x100; ++ lc1 = totlps / lc0; ++ rump = totlps % lc0; ++ } else { ++ lc0 = totlps; ++ lc1 = 0; ++ rump = 0; ++ } ++ ++ if(t->tx_buf) { ++ cns3xxx_spi_tx(0,0,*((uint32_t *) t->tx_buf)); ++ tdma+=1; ++ } ++ else { ++ cns3xxx_spi_tx(0,0,0xff); ++ } ++ ++ //SPI_RECEIVE_BUFFER_REG; ++ { ++ DMAC_DMAMOV(tch, SAR, tdma); ++ DMAC_DMAMOV(tch, DAR, SPI_TRANSMIT_BUFFER_REG_ADDR); ++ DMAC_DMAMOV(tch, CCR, ++ dmac_create_ctrlval(tx_inc, 1, 1, 0, 1, 1, 0)); ++ //DMAC_WFE(tch, rev); ++ if (lc1) ++ DMAC_DMALP(tch, 1, lc1); ++ DMAC_DMALP(tch, 0, lc0); ++ DMAC_WFE(tch, rev); ++ DMAC_DMALDS(tch); ++ DMAC_DMASTS(tch); ++ DMAC_DMAWMB(tch); ++ DMAC_DMASEV(tch, tev); ++ DMAC_DMALPEND(tch, 0, ++ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + ++ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + ++ DMALD_INSTR_SIZE, 1); ++ if (lc1) ++ DMAC_DMALPEND(tch, 1, ++ DMALP_INSTR_SIZE + DMALPEND_INSTR_SIZE + ++ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + ++ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + ++ DMALD_INSTR_SIZE, 1); ++ ++ if (rump) { ++ DMAC_DMALP(tch, 0, rump); ++ DMAC_WFE(tch, rev); ++ DMAC_DMALDS(tch); ++ DMAC_DMASTS(tch); ++ DMAC_DMAWMB(tch); ++ DMAC_DMASEV(tch, tev); ++ DMAC_DMALPEND(tch, 0, ++ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + ++ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + ++ DMALD_INSTR_SIZE, 1); ++ } ++ ++ ++ DMAC_DMAEND(tch); ++ DMAC_DMAGO(tch); ++ } ++ { ++ DMAC_DMAMOV(rch, SAR, SPI_RECEIVE_BUFFER_REG_ADDR); ++ DMAC_DMAMOV(rch, DAR, rdma); ++ DMAC_DMAMOV(rch, CCR, ++ dmac_create_ctrlval(0, 1, 1, rx_inc, 1, 1, 0)); ++ ++ if (lc1) ++ DMAC_DMALP(rch, 1, lc1); ++ DMAC_DMALP(rch, 0, lc0); ++ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL); ++ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0); ++ DMAC_DMASTS(rch); ++ DMAC_DMAWMB(rch); ++ DMAC_DMASEV(rch, rev); ++ DMAC_WFE(rch, tev); ++ DMAC_DMALPEND(rch, 0, ++ DMAWFE_INSTR_SIZE + DMASEV_INSTR_SIZE + ++ DMAWMB_INSTR_SIZE + DMAST_INSTR_SIZE + ++ DMALDP_INSTR_SIZE + DMAWFP_INSTR_SIZE, 1); ++ if (lc1) ++ DMAC_DMALPEND(rch, 1, ++ DMAWFE_INSTR_SIZE + ++ DMASEV_INSTR_SIZE + DMAWMB_INSTR_SIZE + ++ DMAST_INSTR_SIZE + DMALDP_INSTR_SIZE + ++ DMAWFP_INSTR_SIZE + DMALP_INSTR_SIZE + ++ DMALPEND_INSTR_SIZE, 1); ++ ++ ++ if (rump) { ++ DMAC_DMALP(rch, 0, rump); ++ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL); ++ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0); ++ DMAC_DMASTS(rch); ++ DMAC_DMAWMB(rch); ++ DMAC_DMASEV(rch, rev); ++ DMAC_WFE(rch, tev); ++ DMAC_DMALPEND(rch, 0, ++ DMAWFE_INSTR_SIZE + ++ DMASEV_INSTR_SIZE + DMAWMB_INSTR_SIZE + ++ DMAST_INSTR_SIZE + DMALDP_INSTR_SIZE + ++ DMAWFP_INSTR_SIZE, 1); ++ } ++ // extra RX ++ DMAC_DMAWFP(rch, DMAC_SPI_PERIPH_ID, PERIPHERAL); ++ DMAC_DMALDP(rch, DMAC_SPI_PERIPH_ID, 0); ++ DMAC_DMASTS(rch); ++ DMAC_DMAWMB(rch); ++ ++ DMAC_DMAFLUSHP(rch, DMAC_SPI_PERIPH_ID); ++ DMAC_DMASEV(rch, rch); // This will generate an interrupt ++ DMAC_DMAEND(rch); ++ DMAC_DMAGO(rch); ++ } ++ return 0; ++} ++ ++static void cns3xxx_spi_dma_uninitialize(int rch, int tch, int revt, int tevt) ++{ ++ dmac_release_event(rch, revt); ++ dmac_release_event(tch, tevt); ++ dmac_release_channel(rch); ++ dmac_release_channel(tch); ++ return; ++} ++ ++#endif /* CONFIG_SPI_CNS3XXX_USEDMA */ ++ ++static int cns3xxx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) ++{ ++ struct cns3xxx_spi *hw = to_hw(spi); ++#ifdef CONFIG_SPI_CNS3XXX_USEDMA ++ int spi_rxchan, spi_txchan, spi_rxevt, spi_txevt; ++ int rx_data; ++#endif ++ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf, ++ t->len); ++ ++ hw->tx = t->tx_buf; ++ hw->rx = t->rx_buf; ++ hw->len = t->len; ++ hw->count = 0; ++ hw->last_in_message_list = t->last_in_message_list; ++ ++#ifdef CONFIG_SPI_CNS3XXX_USEDMA ++ init_completion(&hw->done); ++ ++ if (cns3xxx_spi_dma_initialize ++ (&spi_rxchan, &spi_txchan, &spi_rxevt, &spi_txevt, hw)) { ++ dev_dbg(&spi->dev, "%s:%d Could not initialize DMA. \n", ++ __FUNCTION__, __LINE__); ++ return 0; ++ } ++ ++ if (t->tx_buf) ++ t->tx_dma = ++ dma_map_single(NULL, t->tx_buf, t->len, DMA_TO_DEVICE); ++ if (t->rx_buf) ++ t->rx_dma = ++ dma_map_single(NULL, t->rx_buf, t->len, DMA_FROM_DEVICE); ++ ++ if (cns3xxx_spi_start_dma ++ (spi_rxchan, spi_txchan, spi_rxevt, spi_txevt, t, hw)) { ++ dev_dbg(&spi->dev, "Could not start DMA. \n"); ++ if (t->tx_buf) ++ dma_unmap_single(NULL, t->tx_dma, t->len, ++ DMA_TO_DEVICE); ++ t->tx_dma = 0; ++ if (t->rx_buf) ++ dma_unmap_single(NULL, t->rx_dma, t->len, ++ DMA_FROM_DEVICE); ++ t->rx_dma = 0; ++ cns3xxx_spi_dma_uninitialize(spi_rxchan, spi_txchan, spi_rxevt, ++ spi_txevt); ++ return 0; ++ } ++ ++ wait_for_completion(&hw->done); ++ ++ dev_dbg(&spi->dev, "DMA reported completion of transfer of %d bytes\n", ++ t->len - 1); ++ ++ if (t->tx_buf) ++ dma_unmap_single(NULL, t->tx_dma, t->len, DMA_TO_DEVICE); ++ t->tx_dma = 0; ++ if (t->rx_buf) ++ dma_unmap_single(NULL, t->rx_dma, t->len, DMA_FROM_DEVICE); ++ t->rx_dma = 0; ++ cns3xxx_spi_dma_uninitialize(spi_rxchan, spi_txchan, spi_rxevt, ++ spi_txevt); ++ ++ if (t->last_in_message_list) ++ cns3xxx_spi_tx_rx(spi->chip_select, 1, ++ (hw->tx) ? hw->tx[hw->len - 1] : 0xff, ++ &rx_data); ++ else ++ cns3xxx_spi_tx_rx(spi->chip_select, 0, ++ (hw->tx) ? hw->tx[hw->len - 1] : 0xff, ++ &rx_data); ++ ++ if (hw->rx) ++ hw->rx[hw->len - 1] = rx_data & 0xff; ++ ++ return hw->len; ++ ++#else /* !CONFIG_SPI_CNS3XXX_USEDMA */ ++ ++#ifdef CNS3XXX_SPI_INTERRUPT ++ ++ init_completion(&hw->done); ++ ++ /* Effectively, we are enabling only the Receive Buffer Interrupt Enable */ ++ /* TX Buf Underrun and RX Buf Overrun are not to happen */ ++ SPI_INTERRUPT_ENABLE_REG = (0x1 << 2); ++// (0x0) | (0x1 << 2) | (0x0 << 3) | (0x1 << 6) | (0x1 << 7); ++ ++ /* Write data and wait for completion */ ++ SPI_TRANSMIT_CONTROL_REG &= ~(0x7); ++ SPI_TRANSMIT_CONTROL_REG |= (spi->chip_select & 0x3) | ++ ((((hw->last_in_message_list) && (hw->len == 1)) ? 0x1 : 0x0) << 2); ++ ++ SPI_TRANSMIT_BUFFER_REG = (hw->tx) ? hw->tx[hw->count] : 0xff; ++ ++ wait_for_completion(&hw->done); ++ ++ SPI_INTERRUPT_ENABLE_REG = 0; ++ ++ return hw->count; ++ ++#else /* !CNS3XXX_SPI_INTERRUPT */ ++ ++ init_completion(&hw->done); ++ ++ if (hw->tx) { ++ int i; ++ u32 rx_data; ++ for (i = 0; i < (hw->len - 1); i++) { ++ dev_dbg(&spi->dev, ++ "[SPI_CNS3XXX_DEBUG] hw->tx[%02d]: 0x%02x\n", i, ++ hw->tx[i]); ++ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i], ++ &rx_data); ++ if (hw->rx) { ++ hw->rx[i] = rx_data; ++ dev_dbg(&spi->dev, ++ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", ++ i, hw->rx[i]); ++ } ++ } ++ ++ if (t->last_in_message_list) { ++ cns3xxx_spi_tx_rx(spi->chip_select, 1, hw->tx[i], ++ &rx_data); ++ if (hw->rx) { ++ hw->rx[i] = rx_data; ++ dev_dbg(&spi->dev, ++ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", ++ i, hw->rx[i]); ++ } ++ } else { ++ cns3xxx_spi_tx_rx(spi->chip_select, 0, hw->tx[i], ++ &rx_data); ++ } ++ goto done; ++ } ++ ++ if (hw->rx) { ++ int i; ++ u32 rx_data; ++ for (i = 0; i < (hw->len - 1); i++) { ++ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data); ++ hw->rx[i] = rx_data; ++ dev_dbg(&spi->dev, ++ "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", i, ++ hw->rx[i]); ++ } ++ ++ if (t->last_in_message_list) { ++ cns3xxx_spi_tx_rx(spi->chip_select, 1, 0xff, &rx_data); ++ } else { ++ cns3xxx_spi_tx_rx(spi->chip_select, 0, 0xff, &rx_data); ++ } ++ hw->rx[i] = rx_data; ++ dev_dbg(&spi->dev, "[SPI_CNS3XXX_DEBUG] hw->rx[%02d]: 0x%02x\n", ++ i, hw->rx[i]); ++ } ++done: ++ return hw->len; ++ ++#endif /* CNS3XXX_SPI_INTERRUPT */ ++ ++#endif /* CONFIG_SPI_CNS3XXX_USEDMA */ ++} ++ ++#ifdef CNS3XXX_SPI_INTERRUPT ++/* Driver supports single master only. ++ * We have disabled fifo, so we wait for the receive buff full interrupt. ++ * Receive Buff overrun, transmit buff underrun are not to happen ++ */ ++static irqreturn_t cns3xxx_spi_irq(int irq, void *dev) ++{ ++ struct cns3xxx_spi *hw = dev; ++ uint32_t int_status; ++ uint8_t data; ++ unsigned int count = hw->count; ++ ++ /* Read the interrupt status and clear interrupt */ ++ int_status = SPI_INTERRUPT_STATUS_REG; ++ ++ if (!(int_status & (0x1 << 2))) { ++ printk("DEBUG THIS ! Unexpected interrupt (status = 0x%x)", int_status); ++ /* Clearing spurious interrupts */ ++ SPI_INTERRUPT_STATUS_REG = (0xF << 4); ++ goto irq_done; ++ } ++ ++ /* Read to clear */ ++ data = SPI_RECEIVE_BUFFER_REG & 0xff; ++ ++ if (hw->rx) ++ hw->rx[hw->count] = data; ++ ++ hw->count++; ++ hw->len--; ++ ++ if (hw->len) { ++ SPI_TRANSMIT_CONTROL_REG |= ++ ((((hw->last_in_message_list) && (hw->len == 1)) ? 0x1 : 0x0) << 2); ++ SPI_TRANSMIT_BUFFER_REG = (hw->tx) ? hw->tx[hw->count] : 0xff; ++ } else { ++ complete(&hw->done); ++ } ++ ++irq_done: ++ return IRQ_HANDLED; ++} ++#endif ++ ++static void __init cns3xxx_spi_initial(void) ++{ ++ ++ /* share pin config. */ ++#if 1 ++#if 0 ++ /* GPIOB18 is set to PCM by default */ ++ MISC_GPIOB_PIN_ENABLE_REG &= ~(MISC_GSW_P0_CRS_PIN); ++ gpio_direction_output(50, 1); ++#endif ++ PM_PLL_HM_PD_CTRL_REG &= ~(0x1 << 5); ++ HAL_MISC_ENABLE_SPI_PINS(); ++ HAL_MISC_ENABLE_PCM_PINS(); /* this just for PCM test */ ++ cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SPI_PCM_I2C)); ++ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SPI_PCM_I2C)); ++#endif ++ ++ SPI_CONFIGURATION_REG = (((0x0 & 0x3) << 0) | /* 8bits shift length */ ++ (0x0 << 9) | /* SPI mode */ ++ (0x0 << 10) | /* disable FIFO */ ++ (0x1 << 11) | /* SPI master mode */ ++ (0x0 << 12) | /* disable SPI loopback mode */ ++ (0x1 << 13) | /* clock phase */ ++ (0x1 << 14) | /* clock polarity */ ++ (0x0 << 24) | /* disable - SPI data swap */ ++#ifdef CONFIG_SPI_CNS3XXX_2IOREAD ++ (0x1 << 29) | /* enable - 2IO Read mode */ ++#else ++ (0x0 << 29) | /* disablea - 2IO Read mode */ ++#endif ++ (0x0 << 30) | /* disable - SPI high speed read for system boot up */ ++ (0x0 << 31)); /* disable - SPI */ ++ ++ /* Set SPI bit rate PCLK/2 */ ++ SPI_BIT_RATE_CONTROL_REG = 0x1; ++ ++ /* Set SPI Tx channel 0 */ ++ SPI_TRANSMIT_CONTROL_REG = 0x0; ++ ++ /* Set Tx FIFO Threshold, Tx FIFO has 2 words */ ++ SPI_FIFO_TRANSMIT_CONFIG_REG &= ~(0x03 << 4); ++ SPI_FIFO_TRANSMIT_CONFIG_REG |= ((0x0 & 0x03) << 4); ++ ++ /* Set Rx FIFO Threshold, Rx FIFO has 2 words */ ++ SPI_FIFO_RECEIVE_CONFIG_REG &= ~(0x03 << 4); ++ SPI_FIFO_RECEIVE_CONFIG_REG |= ((0x0 & 0x03) << 4); ++ ++ /* Disable all interrupt */ ++ SPI_INTERRUPT_ENABLE_REG = 0x0; ++ ++ /* Clear spurious interrupt sources */ ++ SPI_INTERRUPT_STATUS_REG = (0x0F << 4); ++ ++ /* Enable SPI */ ++ SPI_CONFIGURATION_REG |= (0x1 << 31); ++ ++ return; ++} ++ ++static int __init cns3xxx_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct cns3xxx_spi *hw; ++ int err = 0; ++ ++ printk("%s: setup CNS3XXX SPI Controller", __FUNCTION__); ++#ifdef CONFIG_SPI_CNS3XXX_USEDMA ++ printk(" w/ DMA \n"); ++#else ++#ifdef CNS3XXX_SPI_INTERRUPT ++ printk(" in Interrupt mode, w/o DMA \n"); ++#else ++ printk(" in polling mode, w/o DMA \n"); ++#endif ++#endif ++ ++ /* share pin config. */ ++// HAL_MISC_ENABLE_SPI_PINS(); ++ ++ /* Allocate master with space for cns3xxx_spi */ ++ master = spi_alloc_master(&pdev->dev, sizeof(struct cns3xxx_spi)); ++ if (master == NULL) { ++ dev_err(&pdev->dev, "No memory for spi_master\n"); ++ err = -ENOMEM; ++ goto err_nomem; ++ } ++ ++ hw = spi_master_get_devdata(master); ++ memset(hw, 0, sizeof(struct cns3xxx_spi)); ++ ++ hw->master = spi_master_get(master); ++ hw->dev = &pdev->dev; ++ ++ platform_set_drvdata(pdev, hw); ++ init_completion(&hw->done); ++ ++ /* setup the master state. */ ++ ++ master->num_chipselect = 4; ++ master->bus_num = 1; ++ ++ /* setup the state for the bitbang driver */ ++ ++ hw->bitbang.master = hw->master; ++ hw->bitbang.setup_transfer = cns3xxx_spi_setup_transfer; ++ hw->bitbang.chipselect = cns3xxx_spi_chipselect; ++ hw->bitbang.txrx_bufs = cns3xxx_spi_txrx; ++ hw->bitbang.master->setup = cns3xxx_spi_setup; ++ ++ dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang); ++ ++#ifdef CNS3XXX_SPI_INTERRUPT ++ err = request_irq(IRQ_CNS3XXX_SPI, cns3xxx_spi_irq, IRQF_SHARED, "cns3xxx_spi", hw); ++ if (err) { ++ dev_err(&pdev->dev, "Cannot claim IRQ\n"); ++ goto err_no_irq; ++ } ++#endif ++ ++ /* SPI controller initializations */ ++ cns3xxx_spi_initial(); ++ ++ /* register SPI controller */ ++ ++ err = spi_bitbang_start(&hw->bitbang); ++ if (err) { ++ dev_err(&pdev->dev, "Failed to register SPI master\n"); ++ goto err_register; ++ } ++ ++ spi_slave_probe(); ++ ++ return 0; ++ ++err_register: ++#ifdef CNS3XXX_SPI_INTERRUPT ++err_no_irq: ++#endif ++ spi_master_put(hw->master);; ++ ++err_nomem: ++ return err; ++} ++ ++static int __devexit cns3xxx_spi_remove(struct platform_device *dev) ++{ ++ struct cns3xxx_spi *hw = platform_get_drvdata(dev); ++ ++ platform_set_drvdata(dev, NULL); ++ ++ spi_unregister_master(hw->master); ++ ++ //cns3xxx_spi_clk_disable(); ++ ++ spi_master_put(hw->master); ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++ ++static int cns3xxx_spi_suspend(struct platform_device *pdev, pm_message_t msg) ++{ ++ struct cns3xxx_spi *hw = platform_get_drvdata(pdev); ++ ++ //cns3xxx_spi_clk_disable(); ++ return 0; ++} ++ ++static int cns3xxx_spi_resume(struct platform_device *pdev) ++{ ++ struct cns3xxx_spi *hw = platform_get_drvdata(pdev); ++ ++ //cns3xxx_spi_clk_enable() ++ return 0; ++} ++ ++#else ++#define cns3xxx_spi_suspend NULL ++#define cns3xxx_spi_resume NULL ++#endif ++ ++static struct platform_driver cns3xxx_spi_driver = { ++ .probe = cns3xxx_spi_probe, ++ .remove = __devexit_p(cns3xxx_spi_remove), ++ .suspend = cns3xxx_spi_suspend, ++ .resume = cns3xxx_spi_resume, ++ .driver = { ++ .name = "cns3xxx_spi", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init cns3xxx_spi_init(void) ++{ ++ return platform_driver_register(&cns3xxx_spi_driver); ++} ++ ++static void __exit cns3xxx_spi_exit(void) ++{ ++ platform_driver_unregister(&cns3xxx_spi_driver); ++} ++ ++module_init(cns3xxx_spi_init); ++module_exit(cns3xxx_spi_exit); ++ ++MODULE_AUTHOR("Cavium Networks"); ++MODULE_DESCRIPTION("CNS3XXX SPI Controller Driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:cns3xxx_spi"); ++ ++EXPORT_SYMBOL_GPL(cns3xxx_spi_tx_rx); +--- a/include/linux/spi/spi.h ++++ b/include/linux/spi/spi.h +@@ -424,6 +424,12 @@ struct spi_transfer { + u16 delay_usecs; + u32 speed_hz; + ++#ifdef CONFIG_ARCH_CNS3XXX ++ unsigned last_in_message_list; ++#ifdef CONFIG_SPI_CNS3XXX_2IOREAD ++ u8 dio_read; ++#endif ++#endif + struct list_head transfer_list; + }; + +@@ -627,6 +633,13 @@ spi_read(struct spi_device *spi, u8 *buf + return spi_sync(spi, &m); + } + ++#ifdef CONFIG_ARCH_CNS3XXX ++extern int spi_write_read_sync(struct spi_device *spi, ++ const u8 *txbuf, unsigned n_tx, ++ u8 *rxbuf, unsigned n_rx); ++ ++#endif ++ + /* this copies txbuf and rxbuf data; for small transfers only! */ + extern int spi_write_then_read(struct spi_device *spi, + const u8 *txbuf, unsigned n_tx, -- cgit v1.2.3