From f5ab57b33522609d1465f937b69f158be90b177f Mon Sep 17 00:00:00 2001
From: pavlov <pavlov@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 2 Mar 2007 18:17:40 +0000
Subject: commit profile support for base-files... patches still need to be
 done

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6465 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../linux/brcm-2.4/base-files/etc/init.d/netconfig | 145 ---------------------
 1 file changed, 145 deletions(-)
 delete mode 100755 target/linux/brcm-2.4/base-files/etc/init.d/netconfig

(limited to 'target/linux/brcm-2.4/base-files/etc/init.d/netconfig')

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
deleted file mode 100755
index 4cc23d233b..0000000000
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ /dev/null
@@ -1,145 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
-	[ -e /etc/config/network ] && exit 0
-
-	mkdir -p /etc/config
-
-	(
-		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
-			# WGT634u
-			echo boardtype=wgt634u
-		else
-			strings /dev/mtdblock/3
-		fi
-	) | awk '
-	function p(cfgname, name) {
-		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
-	}
-
-	function macinc(mac, maca, i, result) {
-		split(mac, maca, ":")
-		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
-		if (++maca[6] > 0xff) {
-			maca[5]++
-			maca[6] = 0
-		}
-		for (i = 1; i <= 6; i++) {
-			if (i != 1) result = result ":"
-			result = result sprintf("%02x", maca[i])
-		}
-		return result
-	}
-
-	BEGIN {
-		FS="="
-		c["lan_ifname"]="eth0.0"
-		c["wan_ifname"]="eth0.1"
-		c["vlan0ports"]="1 2 3 4 5*"
-		c["vlan1ports"]="0 5"
-		getline < "/proc/diag/model"
-		model=$0
-		for (i = 0; i < 6; i++) {
-			if (mac_check != "") mac_check = mac_check ":"
-			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
-		}
-	}
-	
-	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
-		nvram[$1] = $2
-	}
-	
-	END {
-		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
-			c["wan_ifname"] = ""
-			c["lan_ifname"] = "eth1"
-		}
-		if (model == "ASUS WL-500g") {
-			c["wan_ifname"] = "eth1"
-			c["lan_ifname"] = "eth0"
-		}
-		if (nvram["boardtype"] == "bcm94710r4") {
-			# Toshiba WRC-1000
-			c["lan_ifname"] = "eth0"
-			c["wan_ifname"] = "eth1"
-		}
-		if (nvram["boardtype"] == "wgt634u") {
-			c["vlan0ports"] = "0 1 2 3 5*"
-			c["vlan1ports"] = "4 5"
-		}
-		if (nvram["boardtype"] == "0x0467") {
-			c["vlan0ports"] = "0 1 2 3 5*"
-			c["vlan1ports"] = "4 5"
-		}
-		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
-			if (nvram["boardnum"] == "45") {
-				# WL-500gP
-				c["vlan0ports"] = "1 2 3 4 5*"
-				c["vlan1ports"] = "0 5"
-			} else {
-				# Generic BCM94704
-				c["vlan0ports"] = "0 1 2 3 4 5u"
-				c["vlan1ports"] = ""
-				c["lan_ifname"] = "eth0"
-				c["wan_ifname"] = "eth1"
-
-				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
-				if (nvram["et0macaddr"] ~ mac_check) {
-					c["lan_macaddr"] = nvram["et0macaddr"]
-					c["wan_macaddr"] = macinc(c["lan_macaddr"])
-				}
-			}
-		}
-
-		# WAP54G
-		if ((nvram["boardnum"] == "2") || \
-			(nvram["boardnum"] == "1024")) {
-			c["lan_ifname"]="eth0"
-			c["wan_ifname"]=""
-		}
-	
-		# ASUS WL-700gE
-		# These are actually same as defaults above. For some reason this script applies
-		# Generic BCM94704 settings instead so we revert to proper settings here.	
-		# Hopefully someone will fix this properly soon.
-		if (model == "ASUS WL-700gE") {
-			c["lan_ifname"]="eth0.0"
-			c["wan_ifname"]="eth0.1"
-			c["vlan0ports"]="1 2 3 4 5*"
-			c["vlan1ports"]="0 5"
-		}
-		
-		print "#### VLAN configuration "
-		print "config switch eth0"
-		p("vlan0", "vlan0ports")
-		p("vlan1", "vlan1ports")
-		print ""
-		print ""
-		print "#### Loopback configuration"
-		print "config interface loopback"
-		print "	option ifname	\"lo\""
-		print "	option proto	static"
-		print "	option ipaddr	127.0.0.1"
-		print "	option netmask	255.0.0.0"
-		print ""
-		print ""
-		print "#### LAN configuration"
-		print "config interface lan"
-		print "	option type 	bridge"
-		p("ifname", "lan_ifname")
-		p("macaddr", "lan_macaddr")
-		print "	option proto	static"
-		print "	option ipaddr	192.168.1.1"
-		print "	option netmask	255.255.255.0"
-		print ""
-		print ""
-		print "#### WAN configuration"
-		print "config interface	wan"
-		p("ifname", "wan_ifname")
-		p("macaddr", "wan_macaddr")
-		print "	option proto	dhcp"
-	}' > /etc/config/network
-}
-- 
cgit v1.2.3