From 44a7438217323d90cc430627b82fd165fba52250 Mon Sep 17 00:00:00 2001 From: juhosg Date: Mon, 5 Dec 2011 13:03:54 +0000 Subject: ar71xx: rewrite WNDR3700/3800 handling git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../base-files/etc/defconfig/wndr3700v2/network | 69 ----------- .../base-files/etc/defconfig/wndr3800/network | 69 ----------- target/linux/ar71xx/base-files/etc/diag.sh | 2 +- .../linux/ar71xx/base-files/etc/uci-defaults/leds | 4 +- target/linux/ar71xx/base-files/lib/ar71xx.sh | 52 ++++++-- .../ar71xx/base-files/lib/upgrade/platform.sh | 14 +-- .../ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c | 132 +-------------------- .../linux/ar71xx/files/arch/mips/ar71xx/machtype.h | 4 +- target/linux/ar71xx/generic/profiles/netgear.mk | 4 +- target/linux/ar71xx/image/Makefile | 6 +- 10 files changed, 59 insertions(+), 297 deletions(-) delete mode 100644 target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network delete mode 100644 target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network (limited to 'target/linux/ar71xx') diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network deleted file mode 100644 index 69d7dc712b..0000000000 --- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700v2/network +++ /dev/null @@ -1,69 +0,0 @@ -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0.1 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - -config interface wan - option ifname eth1 - option proto dhcp - -config switch - option name rtl8366s - option reset 1 - option enable_vlan 1 - # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms - option blinkrate 2 - -config switch_vlan - option device rtl8366s - option vlan 1 - option ports "0 1 2 3 5t" - -config switch_port - # Port 1 controls the GREEN configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; - # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; - # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; - # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); - # 14: Link (master); 15: separate register - - option device rtl8366s - option port 1 - option led 6 - -config switch_port - # Port 2 controls the ORANGE configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 2 - option led 9 - -config switch_port - # Port 5 controls the configuration of the WAN LED and the - # section does not correspond to a real switch port. - # - # To toggle the use of green or orange LEDs for the WAN port, - # see the LED setting for wndr3700:green:wan in /etc/config/system. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 5 - option led 2 diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network deleted file mode 100644 index 69d7dc712b..0000000000 --- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network +++ /dev/null @@ -1,69 +0,0 @@ -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0.1 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - -config interface wan - option ifname eth1 - option proto dhcp - -config switch - option name rtl8366s - option reset 1 - option enable_vlan 1 - # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms - option blinkrate 2 - -config switch_vlan - option device rtl8366s - option vlan 1 - option ports "0 1 2 3 5t" - -config switch_port - # Port 1 controls the GREEN configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; - # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; - # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; - # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); - # 14: Link (master); 15: separate register - - option device rtl8366s - option port 1 - option led 6 - -config switch_port - # Port 2 controls the ORANGE configuration of LEDs for - # the switch and the section does not correspond to a real - # switch port. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 2 - option led 9 - -config switch_port - # Port 5 controls the configuration of the WAN LED and the - # section does not correspond to a real switch port. - # - # To toggle the use of green or orange LEDs for the WAN port, - # see the LED setting for wndr3700:green:wan in /etc/config/system. - # - # See the key above for switch port 1 for the meaning of the - # 'led' setting below. - - option device rtl8366s - option port 5 - option led 2 diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index cb3b85177c..3af66b7e34 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -111,7 +111,7 @@ get_status_led() { wzr-hp-g300nh) status_led="buffalo:green:router" ;; - wndr3700 | wndr3700v2 | wndr3800) + wndr3700) status_led="wndr3700:green:power" ;; wnr2000) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index 0a724221cf..a0779effd8 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -123,9 +123,7 @@ wrt160nl) set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt" ;; -wndr3700 | \ -wndr3700v2 | \ -wndr3800) +wndr3700) set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0" set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 02286e9aab..22e951d143 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -6,6 +6,48 @@ AR71XX_BOARD_NAME= AR71XX_MODEL= +ar71xx_get_mem_total() { + $(awk '/MemTotal:/ {print($2)}' /proc/meminfo) +} + +ar71xx_get_mtd_part_magic() { + local part="$1" + local mtd + + mtd=$(find_mtd_part $part) + [ -z "$mtd" ] && return + + dd if=$mtd bs=4 count=1 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' +} + +wndr3700_board_detect() { + local machine="$1" + local magic + local name + + name="wndr3700" + + magic="$(ar71xx_get_mtd_part_magic firmware)" + case $magic in + "33373030") + machine="NETGEAR WNDR3700" + ;; + "33373031") + local mt + + mt=$(ar71xx_get_mem_total) + if [ "$mt" -lt "65536" ]; then + machine="NETGEAR WNDR3700v2" + else + machine="NETGEAR WNDR3800" + fi + ;; + esac + + AR71XX_BOARD_NAME="$name" + AR71XX_MODEL="$machine" +} + ar71xx_board_detect() { local machine local name @@ -169,14 +211,8 @@ ar71xx_board_detect() { *WP543) name="wp543" ;; - *WNDR3700) - name="wndr3700" - ;; - *WNDR3700v2) - name="wndr3700v2" - ;; - *WNDR3800) - name="wndr3800" + *"WNDR3700/WNDR3800") + wndr3700_board_detect "$machine" ;; *WNR2000) name="wnr2000" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index cc327e6a1c..1de9077158 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -127,15 +127,11 @@ platform_check_image() { return 0 ;; wndr3700) - [ "$magic_long" != "33373030" ] && { - echo "Invalid image type." - return 1 - } - return 0 - ;; - wndr3700v2|wndr3800) - [ "$magic_long" != "33373031" ] && { - echo "Invalid image type." + local hw_magic + + hw_magic="$(ar71xx_get_mtd_part_magic firmware)" + [ "$magic_long" != "$hw_magic" ] && { + echo "Invalid image, hardware ID mismatch, hw:$hw_magic image:$magic_long." return 1 } return 0 diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c index 358f1a9f38..568dac917d 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wndr3700.c @@ -49,113 +49,6 @@ #define WNDR3700_CALDATA0_OFFSET 0x1000 #define WNDR3700_CALDATA1_OFFSET 0x5000 -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wndr3700_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x050000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "env", - .offset = 0x050000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x070000, - .size = 0x720000, - }, { - .name = "config", - .offset = 0x790000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config_bak", - .offset = 0x7a0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "pot", - .offset = 0x7b0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "traffic_meter", - .offset = 0x7c0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "language", - .offset = 0x7d0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "caldata", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct mtd_partition wndr3700v2_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x050000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "env", - .offset = 0x050000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .offset = 0x070000, - .size = 0xe40000, - }, { - .name = "config", - .offset = 0xeb0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "config_bak", - .offset = 0xec0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "pot", - .offset = 0xed0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "traffic_meter", - .offset = 0xee0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "language", - .offset = 0xef0000, - .size = 0x100000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "caldata", - .offset = 0xff0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - } -}; -#define wndr3700_num_partitions ARRAY_SIZE(wndr3700_partitions) -#define wndr3700v2_num_partitions ARRAY_SIZE(wndr3700v2_partitions) -#else -#define wndr3700_partitions NULL -#define wndr3700_num_partitions 0 -#define wndr3700v2_partitions NULL -#define wndr3700v2_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data wndr3700_flash_data; - static struct gpio_led wndr3700_leds_gpio[] __initdata = { { .name = "wndr3700:green:power", @@ -218,7 +111,7 @@ static struct platform_device wndr3700_rtl8366s_device = { } }; -static void __init wndr3700_common_setup(void) +static void __init wndr3700_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); @@ -242,7 +135,7 @@ static void __init wndr3700_common_setup(void) ar71xx_add_device_usb(); - ar71xx_add_device_m25p80(&wndr3700_flash_data); + ar71xx_add_device_m25p80(NULL); ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), wndr3700_leds_gpio); @@ -269,24 +162,5 @@ static void __init wndr3700_common_setup(void) art + WNDR3700_WMAC1_MAC_OFFSET); } -static void __init wndr3700_setup(void) -{ - wndr3700_flash_data.parts = wndr3700_partitions, - wndr3700_flash_data.nr_parts = wndr3700_num_partitions, - wndr3700_common_setup(); -} - -MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700", +MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700/WNDR3800", wndr3700_setup); - -static void __init wndr3700v2_setup(void) -{ - wndr3700_flash_data.parts = wndr3700v2_partitions, - wndr3700_flash_data.nr_parts = wndr3700v2_num_partitions, - wndr3700_common_setup(); -} - -MIPS_MACHINE(AR71XX_MACH_WNDR3700V2, "WNDR3700v2", "NETGEAR WNDR3700v2", - wndr3700v2_setup); -MIPS_MACHINE(AR71XX_MACH_WNDR3800, "WNDR3800", "NETGEAR WNDR3800", - wndr3700v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h index 6b2c160c96..d755a7ae5f 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h @@ -69,9 +69,7 @@ enum ar71xx_mach_type { AR71XX_MACH_WHR_G301N, /* Buffalo WHR-G301N */ AR71XX_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ AR71XX_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ - AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700 */ - AR71XX_MACH_WNDR3700V2, /* NETGEAR WNDR3700v2 */ - AR71XX_MACH_WNDR3800, /* NETGEAR WNDR3800 */ + AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800 */ AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */ AR71XX_MACH_WP543, /* Compex WP543 */ AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */ diff --git a/target/linux/ar71xx/generic/profiles/netgear.mk b/target/linux/ar71xx/generic/profiles/netgear.mk index 438d03bba3..78dba9762a 100644 --- a/target/linux/ar71xx/generic/profiles/netgear.mk +++ b/target/linux/ar71xx/generic/profiles/netgear.mk @@ -6,12 +6,12 @@ # define Profile/WNDR3700 - NAME:=NETGEAR WNDR3700 + NAME:=NETGEAR WNDR3700/3800 PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev endef define Profile/WNDR3700/Description - Package set optimized for the NETGEAR WNDR3700 + Package set optimized for the NETGEAR WNDR3700/3800 endef $(eval $(call Profile,WNDR3700)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 32c1b24c17..2394e99380 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -759,13 +759,11 @@ endef wndr3700_cmdline=board=WNDR3700 console=ttyS0,115200 wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),6656k(rootfs),64k(art)ro,7680k@0x70000(firmware) -wndr3700v2_cmdline=board=WNDR3700v2 console=ttyS0,115200 wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),14848k(rootfs),64k(art)ro,15872k@0x70000(firmware) -wndr3800_cmdline=board=WNDR3800 console=ttyS0,115200 define Image/Build/Profile/WNDR3700 $(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3700,$(wndr3700_cmdline),$(wndr3700_mtdlayout),3700,WNDR3700,"" NA,) - $(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3700v2,$(wndr3700v2_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3700v2,"",-H 29763654+16+64) - $(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3800,$(wndr3800_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3800,"",-H 29763654+16+128) + $(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3700v2,$(wndr3700_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3700,"",-H 29763654+16+64) + $(call Image/Build/Template/$(fs_64k)/$(1),Netgear,wndr3800,$(wndr3700_cmdline),$(wndr3700v2_mtdlayout),3701,WNDR3700,"",-H 29763654+16+128) endef wr400n_cmdline=board=WRT400N console=ttyS0,115200 -- cgit v1.2.3