From 786449614f4a99cf6ff2f6d7ad2a359c1ed3fe58 Mon Sep 17 00:00:00 2001 From: juhosg Date: Wed, 15 Dec 2010 19:55:47 +0000 Subject: ar71xx: UBNT M-Series MAC address fix UBNT M-Series devices have 2 MAC addresses in board data. Fix is to use both entries from board data instead of one entry. Signed-off-by: Kestutis Barkauskas git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24611 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'target/linux/ar71xx/files/arch') diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c index 5b952643ab..feb913a63b 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c @@ -225,15 +225,16 @@ MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", static void __init ubnt_m_setup(void) { - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ar71xx_add_device_m25p80(NULL); ar71xx_add_device_mdio(~0); - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ar71xx_eth0_data.speed = SPEED_100; ar71xx_eth0_data.duplex = DUPLEX_FULL; -- cgit v1.2.3