From c01dd82e04c7c37dd4f5b609bcc2de2607030a23 Mon Sep 17 00:00:00 2001 From: juhosg Date: Mon, 24 Oct 2011 21:49:26 +0000 Subject: ar71xx: Buffalo WHR-HP-G300N kernel support The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28567 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../base-files/etc/defconfig/whr-hp-g300n/network | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 target/linux/ar71xx/base-files/etc/defconfig/whr-hp-g300n/network (limited to 'target/linux/ar71xx/base-files/etc/defconfig/whr-hp-g300n/network') diff --git a/target/linux/ar71xx/base-files/etc/defconfig/whr-hp-g300n/network b/target/linux/ar71xx/base-files/etc/defconfig/whr-hp-g300n/network new file mode 100644 index 0000000000..de201bf5ec --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/defconfig/whr-hp-g300n/network @@ -0,0 +1,24 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config interface wan + option ifname eth1 + option proto dhcp + +config switch eth0 + option enable_vlan 1 + +config switch_vlan + option device eth0 + option vlan 1 + option ports "0 1 2 3 4" -- cgit v1.2.3