From 4b7db99798885095b033f783fc43fd05f35ce99d Mon Sep 17 00:00:00 2001 From: nbd Date: Sat, 26 Jun 2010 20:42:08 +0000 Subject: remove the old broadcom wl driver for linux 2.4 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21947 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/broadcom-wl-old/src/include/bcmdefs.h | 105 -- package/broadcom-wl-old/src/include/bcmutils.h | 257 ---- package/broadcom-wl-old/src/include/proto/802.11.h | 1257 ------------------ package/broadcom-wl-old/src/include/proto/bcmeth.h | 100 -- .../broadcom-wl-old/src/include/proto/bcmevent.h | 151 --- .../broadcom-wl-old/src/include/proto/ethernet.h | 164 --- package/broadcom-wl-old/src/include/proto/wpa.h | 147 --- package/broadcom-wl-old/src/include/typedefs.h | 229 ---- package/broadcom-wl-old/src/include/wlioctl.h | 1387 -------------------- package/broadcom-wl-old/src/include/wlutils.h | 101 -- 10 files changed, 3898 deletions(-) delete mode 100644 package/broadcom-wl-old/src/include/bcmdefs.h delete mode 100644 package/broadcom-wl-old/src/include/bcmutils.h delete mode 100644 package/broadcom-wl-old/src/include/proto/802.11.h delete mode 100644 package/broadcom-wl-old/src/include/proto/bcmeth.h delete mode 100644 package/broadcom-wl-old/src/include/proto/bcmevent.h delete mode 100644 package/broadcom-wl-old/src/include/proto/ethernet.h delete mode 100644 package/broadcom-wl-old/src/include/proto/wpa.h delete mode 100644 package/broadcom-wl-old/src/include/typedefs.h delete mode 100644 package/broadcom-wl-old/src/include/wlioctl.h delete mode 100644 package/broadcom-wl-old/src/include/wlutils.h (limited to 'package/broadcom-wl-old/src/include') diff --git a/package/broadcom-wl-old/src/include/bcmdefs.h b/package/broadcom-wl-old/src/include/bcmdefs.h deleted file mode 100644 index f489419003..0000000000 --- a/package/broadcom-wl-old/src/include/bcmdefs.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Misc system wide definitions - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - */ - -#ifndef _bcmdefs_h_ -#define _bcmdefs_h_ - -/* - * One doesn't need to include this file explicitly, gets included automatically if - * typedefs.h is included. - */ - -/* Reclaiming text and data : - * The following macros specify special linker sections that can be reclaimed - * after a system is considered 'up'. - */ -#if defined(__GNUC__) && defined(BCMRECLAIM) -extern bool bcmreclaimed; -#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data -#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn -#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */ -#define BCMINITDATA(_data) _data -#define BCMINITFN(_fn) _fn -#define bcmreclaimed 0 -#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */ - -/* Reclaim uninit functions if BCMNODOWN is defined */ -/* and if they are not already removed by -gc-sections */ -#ifdef BCMNODOWN -#define BCMUNINITFN(_fn) BCMINITFN(_fn) -#else -#define BCMUNINITFN(_fn) _fn -#endif - -#ifdef BCMRECLAIM -#define CONST -#else -#define CONST const -#endif /* BCMRECLAIM */ - -/* Compatibility with old-style BCMRECLAIM */ -#define BCMINIT(_id) _id - - -/* Put some library data/code into ROM to reduce RAM requirements */ -#if defined(__GNUC__) && defined(BCMROMOFFLOAD) -#define BCMROMDATA(_data) __attribute__ ((__section__ (".datarom." #_data))) _data -#define BCMROMFN(_fn) __attribute__ ((__section__ (".textrom." #_fn))) _fn -#else -#define BCMROMDATA(_data) _data -#define BCMROMFN(_fn) _fn -#endif - -/* Bus types */ -#define SB_BUS 0 /* Silicon Backplane */ -#define PCI_BUS 1 /* PCI target */ -#define PCMCIA_BUS 2 /* PCMCIA target */ -#define SDIO_BUS 3 /* SDIO target */ -#define JTAG_BUS 4 /* JTAG */ -#define NO_BUS 0xFF /* Bus that does not support R/W REG */ - -/* Allows optimization for single-bus support */ -#ifdef BCMBUSTYPE -#define BUSTYPE(bus) (BCMBUSTYPE) -#else -#define BUSTYPE(bus) (bus) -#endif - -/* Defines for DMA Address Width - Shared between OSL and HNDDMA */ -#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */ -#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */ -#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */ - -#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */ -#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */ -#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */ -#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */ - -/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF). - * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL. - * There is a compile time check in wlc.c which ensure that this value is at least as big - * as TXOFF. This value is used in dma_rxfill (hnddma.c). - */ -#define BCMEXTRAHDROOM 160 - -/* Headroom required for dongle-to-host communication. Packets allocated - * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should - * leave this much room in front for low-level message headers which may - * be needed to get across the dongle bus to the host. (These messages - * don't go over the network, so room for the full WL header above would - * be a waste.) - */ -#define BCMDONGLEHDRSZ 8 - - - -#endif /* _bcmdefs_h_ */ diff --git a/package/broadcom-wl-old/src/include/bcmutils.h b/package/broadcom-wl-old/src/include/bcmutils.h deleted file mode 100644 index 521b415e04..0000000000 --- a/package/broadcom-wl-old/src/include/bcmutils.h +++ /dev/null @@ -1,257 +0,0 @@ -/* - * Misc useful os-independent macros and functions. - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - */ - -#ifndef _bcmutils_h_ -#define _bcmutils_h_ - -/* ** driver/apps-shared section ** */ - -#define BCME_STRLEN 64 /* Max string length for BCM errors */ -#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST)) - - -/* - * error codes could be added but the defined ones shouldn't be changed/deleted - * these error codes are exposed to the user code - * when ever a new error code is added to this list - * please update errorstring table with the related error string and - * update osl files with os specific errorcode map -*/ - -#define BCME_OK 0 /* Success */ -#define BCME_ERROR -1 /* Error generic */ -#define BCME_BADARG -2 /* Bad Argument */ -#define BCME_BADOPTION -3 /* Bad option */ -#define BCME_NOTUP -4 /* Not up */ -#define BCME_NOTDOWN -5 /* Not down */ -#define BCME_NOTAP -6 /* Not AP */ -#define BCME_NOTSTA -7 /* Not STA */ -#define BCME_BADKEYIDX -8 /* BAD Key Index */ -#define BCME_RADIOOFF -9 /* Radio Off */ -#define BCME_NOTBANDLOCKED -10 /* Not band locked */ -#define BCME_NOCLK -11 /* No Clock */ -#define BCME_BADRATESET -12 /* BAD Rate valueset */ -#define BCME_BADBAND -13 /* BAD Band */ -#define BCME_BUFTOOSHORT -14 /* Buffer too short */ -#define BCME_BUFTOOLONG -15 /* Buffer too long */ -#define BCME_BUSY -16 /* Busy */ -#define BCME_NOTASSOCIATED -17 /* Not Associated */ -#define BCME_BADSSIDLEN -18 /* Bad SSID len */ -#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */ -#define BCME_BADCHAN -20 /* Bad Channel */ -#define BCME_BADADDR -21 /* Bad Address */ -#define BCME_NORESOURCE -22 /* Not Enough Resources */ -#define BCME_UNSUPPORTED -23 /* Unsupported */ -#define BCME_BADLEN -24 /* Bad length */ -#define BCME_NOTREADY -25 /* Not Ready */ -#define BCME_EPERM -26 /* Not Permitted */ -#define BCME_NOMEM -27 /* No Memory */ -#define BCME_ASSOCIATED -28 /* Associated */ -#define BCME_RANGE -29 /* Not In Range */ -#define BCME_NOTFOUND -30 /* Not Found */ -#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */ -#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */ -#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */ -#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */ -#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */ -#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */ -#define BCME_LAST BCME_DONGLE_DOWN - -/* These are collection of BCME Error strings */ -#define BCMERRSTRINGTABLE { \ - "OK", \ - "Undefined error", \ - "Bad Argument", \ - "Bad Option", \ - "Not up", \ - "Not down", \ - "Not AP", \ - "Not STA", \ - "Bad Key Index", \ - "Radio Off", \ - "Not band locked", \ - "No clock", \ - "Bad Rate valueset", \ - "Bad Band", \ - "Buffer too short", \ - "Buffer too long", \ - "Busy", \ - "Not Associated", \ - "Bad SSID len", \ - "Out of Range Channel", \ - "Bad Channel", \ - "Bad Address", \ - "Not Enough Resources", \ - "Unsupported", \ - "Bad length", \ - "Not Ready", \ - "Not Permitted", \ - "No Memory", \ - "Associated", \ - "Not In Range", \ - "Not Found", \ - "WME Not Enabled", \ - "TSPEC Not Found", \ - "ACM Not Supported", \ - "Not WME Association", \ - "SDIO Bus Error", \ - "Dongle Not Accessible" \ -} - -#ifndef ABS -#define ABS(a) (((a) < 0)?-(a):(a)) -#endif /* ABS */ - -#ifndef MIN -#define MIN(a, b) (((a) < (b))?(a):(b)) -#endif /* MIN */ - -#ifndef MAX -#define MAX(a, b) (((a) > (b))?(a):(b)) -#endif /* MAX */ - -#define CEIL(x, y) (((x) + ((y)-1)) / (y)) -#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) -#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0) -#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0) -#define VALID_MASK(mask) !((mask) & ((mask) + 1)) -#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member) -#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0])) - -/* bit map related macros */ -#ifndef setbit -#ifndef NBBY /* the BSD family defines NBBY */ -#define NBBY 8 /* 8 bits per byte */ -#endif /* #ifndef NBBY */ -#define setbit(a, i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY)) -#define clrbit(a, i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -#define isset(a, i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) -#define isclr(a, i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) -#endif /* setbit */ - -#define NBITS(type) (sizeof(type) * 8) -#define NBITVAL(nbits) (1 << (nbits)) -#define MAXBITVAL(nbits) ((1 << (nbits)) - 1) -#define NBITMASK(nbits) MAXBITVAL(nbits) -#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8) - -/* basic mux operation - can be optimized on several architectures */ -#define MUX(pred, true, false) ((pred) ? (true) : (false)) - -/* modulo inc/dec - assumes x E [0, bound - 1] */ -#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1) -#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1) - -/* modulo inc/dec, bound = 2^k */ -#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1)) -#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1)) - -/* modulo add/sub - assumes x, y E [0, bound - 1] */ -#define MODADD(x, y, bound) \ - MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y)) -#define MODSUB(x, y, bound) \ - MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y)) - -/* module add/sub, bound = 2^k */ -#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1)) -#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1)) - -/* crc defines */ -#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */ -#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */ -#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */ -#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */ -#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */ - -/* bcm_format_flags() bit description structure */ -typedef struct bcm_bit_desc { - uint32 bit; - char* name; -} bcm_bit_desc_t; - -/* tag_ID/length/value_buffer tuple */ -typedef struct bcm_tlv { - uint8 id; - uint8 len; - uint8 data[1]; -} bcm_tlv_t; - -/* Check that bcm_tlv_t fits into the given buflen */ -#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len)) - -/* buffer length for ethernet address from bcm_ether_ntoa() */ -#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */ - -/* unaligned load and store macros */ -#ifdef IL_BIGENDIAN -static INLINE uint32 -load32_ua(uint8 *a) -{ - return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]); -} - -static INLINE void -store32_ua(uint8 *a, uint32 v) -{ - a[0] = (v >> 24) & 0xff; - a[1] = (v >> 16) & 0xff; - a[2] = (v >> 8) & 0xff; - a[3] = v & 0xff; -} - -static INLINE uint16 -load16_ua(uint8 *a) -{ - return ((a[0] << 8) | a[1]); -} - -static INLINE void -store16_ua(uint8 *a, uint16 v) -{ - a[0] = (v >> 8) & 0xff; - a[1] = v & 0xff; -} - -#else - -static INLINE uint32 -load32_ua(uint8 *a) -{ - return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]); -} - -static INLINE void -store32_ua(uint8 *a, uint32 v) -{ - a[3] = (v >> 24) & 0xff; - a[2] = (v >> 16) & 0xff; - a[1] = (v >> 8) & 0xff; - a[0] = v & 0xff; -} - -static INLINE uint16 -load16_ua(uint8 *a) -{ - return ((a[1] << 8) | a[0]); -} - -static INLINE void -store16_ua(uint8 *a, uint16 v) -{ - a[1] = (v >> 8) & 0xff; - a[0] = v & 0xff; -} - -#endif /* IL_BIGENDIAN */ - -#endif /* _bcmutils_h_ */ diff --git a/package/broadcom-wl-old/src/include/proto/802.11.h b/package/broadcom-wl-old/src/include/proto/802.11.h deleted file mode 100644 index 3141a27cdc..0000000000 --- a/package/broadcom-wl-old/src/include/proto/802.11.h +++ /dev/null @@ -1,1257 +0,0 @@ -/* - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * Fundamental types and constants relating to 802.11 - * - */ - -#ifndef _802_11_H_ -#define _802_11_H_ - -#ifndef _TYPEDEFS_H_ -#include -#endif - -#ifndef _NET_ETHERNET_H_ -#include -#endif - -#include - -/* enable structure packing */ -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#pragma pack(1) -#define PACKED -#endif - -#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */ - -/* Generic 802.11 frame constants */ -#define DOT11_A3_HDR_LEN 24 /* d11 header length with A3 */ -#define DOT11_A4_HDR_LEN 30 /* d11 header length with A4 */ -#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN /* MAC header length */ -#define DOT11_FCS_LEN 4 /* d11 FCS length */ -#define DOT11_ICV_LEN 4 /* d11 ICV length */ -#define DOT11_ICV_AES_LEN 8 /* d11 ICV/AES length */ -#define DOT11_QOS_LEN 2 /* d11 QoS length */ -#define DOT11_HTC_LEN 4 /* d11 HT Control field length */ - -#define DOT11_KEY_INDEX_SHIFT 6 /* d11 key index shift */ -#define DOT11_IV_LEN 4 /* d11 IV length */ -#define DOT11_IV_TKIP_LEN 8 /* d11 IV TKIP length */ -#define DOT11_IV_AES_OCB_LEN 4 /* d11 IV/AES/OCB length */ -#define DOT11_IV_AES_CCM_LEN 8 /* d11 IV/AES/CCM length */ -#define DOT11_IV_MAX_LEN 8 /* maximum iv len for any encryption */ - -/* Includes MIC */ -#define DOT11_MAX_MPDU_BODY_LEN 2304 /* max MPDU body length */ -/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */ -#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \ - DOT11_QOS_LEN + \ - DOT11_IV_AES_CCM_LEN + \ - DOT11_MAX_MPDU_BODY_LEN + \ - DOT11_ICV_LEN + \ - DOT11_FCS_LEN) /* d11 max MPDU length */ - -#define DOT11_MAX_SSID_LEN 32 /* d11 max ssid length */ - -/* dot11RTSThreshold */ -#define DOT11_DEFAULT_RTS_LEN 2347 /* d11 default RTS length */ -#define DOT11_MAX_RTS_LEN 2347 /* d11 max RTS length */ - -/* dot11FragmentationThreshold */ -#define DOT11_MIN_FRAG_LEN 256 /* d11 min fragmentation length */ -#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength - * of the attached PHY - */ -#define DOT11_DEFAULT_FRAG_LEN 2346 /* d11 default fragmentation length */ - -/* dot11BeaconPeriod */ -#define DOT11_MIN_BEACON_PERIOD 1 /* d11 min beacon period */ -#define DOT11_MAX_BEACON_PERIOD 0xFFFF /* d11 max beacon period */ - -/* dot11DTIMPeriod */ -#define DOT11_MIN_DTIM_PERIOD 1 /* d11 min DTIM period */ -#define DOT11_MAX_DTIM_PERIOD 0xFF /* d11 max DTIM period */ - -/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */ -#define DOT11_LLC_SNAP_HDR_LEN 8 /* d11 LLC/SNAP header length */ -#define DOT11_OUI_LEN 3 /* d11 OUI length */ -struct dot11_llc_snap_header { - uint8 dsap; /* always 0xAA */ - uint8 ssap; /* always 0xAA */ - uint8 ctl; /* always 0x03 */ - uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00 - * Bridge-Tunnel: 0x00 0x00 0xF8 - */ - uint16 type; /* ethertype */ -} PACKED; - -/* RFC1042 header used by 802.11 per 802.1H */ -#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) /* RCF1042 header length */ - -/* Generic 802.11 MAC header */ -/* - * N.B.: This struct reflects the full 4 address 802.11 MAC header. - * The fields are defined such that the shorter 1, 2, and 3 - * address headers just use the first k fields. - */ -struct dot11_header { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr a1; /* address 1 */ - struct ether_addr a2; /* address 2 */ - struct ether_addr a3; /* address 3 */ - uint16 seq; /* sequence control */ - struct ether_addr a4; /* address 4 */ -} PACKED; - -/* Control frames */ - -struct dot11_rts_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ - struct ether_addr ta; /* transmitter address */ -} PACKED; -#define DOT11_RTS_LEN 16 /* d11 RTS frame length */ - -struct dot11_cts_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ -} PACKED; -#define DOT11_CTS_LEN 10 /* d11 CTS frame length */ - -struct dot11_ack_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ -} PACKED; -#define DOT11_ACK_LEN 10 /* d11 ACK frame length */ - -struct dot11_ps_poll_frame { - uint16 fc; /* frame control */ - uint16 durid; /* AID */ - struct ether_addr bssid; /* receiver address, STA in AP */ - struct ether_addr ta; /* transmitter address */ -} PACKED; -#define DOT11_PS_POLL_LEN 16 /* d11 PS poll frame length */ - -struct dot11_cf_end_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ - struct ether_addr bssid; /* transmitter address, STA in AP */ -} PACKED; -#define DOT11_CS_END_LEN 16 /* d11 CF-END frame length */ - -/* BA/BAR Control parameters */ -#define DOT11_BA_CTL_POLICY_NORMAL 0x0000 /* normal ack */ -#define DOT11_BA_CTL_POLICY_NOACK 0x0001 /* no ack */ -#define DOT11_BA_CTL_POLICY_MASK 0x0001 /* ack policy mask */ - -#define DOT11_BA_CTL_MTID 0x0002 /* multi tid BA */ -#define DOT11_BA_CTL_COMPRESSED 0x0004 /* compressed bitmap */ - -#define DOT11_BA_CTL_NUMMSDU_MASK 0x0FC0 /* num msdu in bitmap mask */ -#define DOT11_BA_CTL_NUMMSDU_SHIFT 6 /* num msdu in bitmap shift */ - -#define DOT11_BA_CTL_TID_MASK 0xF000 /* tid mask */ -#define DOT11_BA_CTL_TID_SHIFT 12 /* tid shift */ - -struct dot11_ba_req_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ - struct ether_addr ta; /* transmitter address */ - uint16 bar_control; /* BAR Control */ - uint16 seqnum; /* Starting Sequence control */ -} PACKED; -#define DOT11_BA_REQ_LEN 20 /* BAR frame length */ - -#define DOT11_BA_BITMAP_LEN 128 /* bitmap length */ -#define DOT11_BA_CMP_BITMAP_LEN 8 /* compressed bitmap length */ -struct dot11_ba_frame { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr ra; /* receiver address */ - struct ether_addr ta; /* transmitter address */ - uint16 ba_control; /* BA Control */ - uint16 seqnum; /* Starting Sequence control */ - uint8 bitmap[DOT11_BA_BITMAP_LEN]; /* Block Ack Bitmap */ -} PACKED; -#define DOT11_BA_LEN 20 /* BA frame length (without bitmap) */ - -/* Management frame header */ -struct dot11_management_header { - uint16 fc; /* frame control */ - uint16 durid; /* duration/ID */ - struct ether_addr da; /* receiver address */ - struct ether_addr sa; /* transmitter address */ - struct ether_addr bssid; /* BSS ID */ - uint16 seq; /* sequence control */ -} PACKED; -#define DOT11_MGMT_HDR_LEN 24 /* d11 management header length */ - -/* Management frame payloads */ - -struct dot11_bcn_prb { - uint32 timestamp[2]; - uint16 beacon_interval; - uint16 capability; -} PACKED; -#define DOT11_BCN_PRB_LEN 12 /* d11 beacon probe frame length */ - -struct dot11_auth { - uint16 alg; /* algorithm */ - uint16 seq; /* sequence control */ - uint16 status; /* status code */ -} PACKED; -#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info - * elt - */ - -struct dot11_assoc_req { - uint16 capability; /* capability information */ - uint16 listen; /* listen interval */ -} PACKED; -#define DOT11_ASSOC_REQ_FIXED_LEN 4 /* length of assoc frame without info elts */ - -struct dot11_reassoc_req { - uint16 capability; /* capability information */ - uint16 listen; /* listen interval */ - struct ether_addr ap; /* Current AP address */ -} PACKED; -#define DOT11_REASSOC_REQ_FIXED_LEN 10 /* length of assoc frame without info elts */ - -struct dot11_assoc_resp { - uint16 capability; /* capability information */ - uint16 status; /* status code */ - uint16 aid; /* association ID */ -} PACKED; - -struct dot11_action_measure { - uint8 category; - uint8 action; - uint8 token; - uint8 data[1]; -} PACKED; -#define DOT11_ACTION_MEASURE_LEN 3 /* d11 action measurement header length */ - -struct dot11_action_switch_channel { - uint8 category; - uint8 action; - uint8 data[5]; /* for switch IE */ -} PACKED; - -struct dot11_action_ht_ch_width { - uint8 category; - uint8 action; - uint8 ch_width; -} PACKED; - -struct dot11_action_ht_mimops { - uint8 category; - uint8 action; - uint8 enable; - uint8 psmode; -} PACKED; - -/* ************* 802.11h related definitions. ************* */ -typedef struct { - uint8 id; - uint8 len; - uint8 power; -} dot11_power_cnst_t; - -typedef struct { - uint8 min; - uint8 max; -} dot11_power_cap_t; - -typedef struct { - uint8 id; - uint8 len; - uint8 tx_pwr; - uint8 margin; -} dot11_tpc_rep_t; -#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */ - -typedef struct { - uint8 id; - uint8 len; - uint8 first_channel; - uint8 num_channels; -} dot11_supp_channels_t; - -/* channel switch announcement (CSA) mode type - 802.11h-2003 $7.3.2.20 */ -#define DOT11_CSA_MODE_ADVISORY 0 /* no DOT11_CSA_MODE_NO_TX restriction imposed */ -#define DOT11_CSA_MODE_NO_TX 1 /* no transmission upon receiving CSA frame. */ - -/* CSA IE data structure */ -struct dot11_channel_switch { - uint8 id; - uint8 len; - uint8 mode; - uint8 channel; - uint8 count; -} PACKED; -typedef struct dot11_channel_switch dot11_channel_switch_t; - -#define DOT11_SWITCH_IE_LEN 3 /* length of IE data, not including 2 byte header */ - -/* 802.11h Measurement Request/Report IEs */ -/* Measurement Type field */ -#define DOT11_MEASURE_TYPE_BASIC 0 /* d11 measurement basic type */ -#define DOT11_MEASURE_TYPE_CCA 1 /* d11 measurement CCA type */ -#define DOT11_MEASURE_TYPE_RPI 2 /* d11 measurement PRI type */ - -/* Measurement Mode field */ - -/* Measurement Request Modes */ -#define DOT11_MEASURE_MODE_ENABLE (1<<1) /* d11 measurement enable */ -#define DOT11_MEASURE_MODE_REQUEST (1<<2) /* d11 measurement request */ -#define DOT11_MEASURE_MODE_REPORT (1<<3) /* d11 measurement report */ -/* Measurement Report Modes */ -#define DOT11_MEASURE_MODE_LATE (1<<0) /* d11 measurement late */ -#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) /* d11 measurement incapable */ -#define DOT11_MEASURE_MODE_REFUSED (1<<2) /* d11 measurement refuse */ -/* Basic Measurement Map bits */ -#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) /* d11 measurement basic map BSS */ -#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) /* d11 measurement map OFDM */ -#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) /* d11 measurement map unknown */ -#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) /* d11 measurement map radar */ -#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) /* d11 measurement map unmeasuremnt */ - -typedef struct { - uint8 id; - uint8 len; - uint8 token; - uint8 mode; - uint8 type; - uint8 channel; - uint8 start_time[8]; - uint16 duration; -} dot11_meas_req_t; -#define DOT11_MNG_IE_MREQ_LEN 14 /* d11 measurement request IE length */ -/* length of Measure Request IE data not including variable len */ -#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 /* d11 measurement request IE fixed length */ - -struct dot11_meas_rep { - uint8 id; - uint8 len; - uint8 token; - uint8 mode; - uint8 type; - union - { - struct { - uint8 channel; - uint8 start_time[8]; - uint16 duration; - uint8 map; - } PACKED basic; - uint8 data[1]; - } PACKED rep; -} PACKED; -typedef struct dot11_meas_rep dot11_meas_rep_t; - -/* length of Measure Report IE data not including variable len */ -#define DOT11_MNG_IE_MREP_FIXED_LEN 3 /* d11 measurement response IE fixed length */ - -struct dot11_meas_rep_basic { - uint8 channel; - uint8 start_time[8]; - uint16 duration; - uint8 map; -} PACKED; -typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t; -#define DOT11_MEASURE_BASIC_REP_LEN 12 /* d11 measurement basic report length */ - -struct dot11_quiet { - uint8 id; - uint8 len; - uint8 count; /* TBTTs until beacon interval in quiet starts */ - uint8 period; /* Beacon intervals between periodic quiet periods ? */ - uint16 duration; /* Length of quiet period, in TU's */ - uint16 offset; /* TU's offset from TBTT in Count field */ -} PACKED; -typedef struct dot11_quiet dot11_quiet_t; - -typedef struct { - uint8 channel; - uint8 map; -} chan_map_tuple_t; - -typedef struct { - uint8 id; - uint8 len; - uint8 eaddr[ETHER_ADDR_LEN]; - uint8 interval; - chan_map_tuple_t map[1]; -} dot11_ibss_dfs_t; - -/* WME Elements */ -#define WME_OUI "\x00\x50\xf2" /* WME OUI */ -#define WME_VER 1 /* WME version */ -#define WME_TYPE 2 /* WME type */ -#define WME_SUBTYPE_IE 0 /* Information Element */ -#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */ -#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */ - -/* WME Access Category Indices (ACIs) */ -#define AC_BE 0 /* Best Effort */ -#define AC_BK 1 /* Background */ -#define AC_VI 2 /* Video */ -#define AC_VO 3 /* Voice */ -#define AC_COUNT 4 /* number of ACs */ - -typedef uint8 ac_bitmap_t; /* AC bitmap of (1 << AC_xx) */ - -#define AC_BITMAP_NONE 0x0 /* No ACs */ -#define AC_BITMAP_ALL 0xf /* All ACs */ -#define AC_BITMAP_TST(ab, ac) (((ab) & (1 << (ac))) != 0) - -/* WME Information Element (IE) */ -struct wme_ie { - uint8 oui[3]; - uint8 type; - uint8 subtype; - uint8 version; - uint8 qosinfo; -} PACKED; -typedef struct wme_ie wme_ie_t; -#define WME_IE_LEN 7 /* WME IE length */ - -struct edcf_acparam { - uint8 ACI; - uint8 ECW; - uint16 TXOP; /* stored in network order (ls octet first) */ -} PACKED; -typedef struct edcf_acparam edcf_acparam_t; - -/* WME Parameter Element (PE) */ -struct wme_param_ie { - uint8 oui[3]; - uint8 type; - uint8 subtype; - uint8 version; - uint8 qosinfo; - uint8 rsvd; - edcf_acparam_t acparam[AC_COUNT]; -} PACKED; -typedef struct wme_param_ie wme_param_ie_t; -#define WME_PARAM_IE_LEN 24 /* WME Parameter IE length */ - -/* QoS Info field for IE as sent from AP */ -#define WME_QI_AP_APSD_MASK 0x80 /* U-APSD Supported mask */ -#define WME_QI_AP_APSD_SHIFT 7 /* U-APSD Supported shift */ -#define WME_QI_AP_COUNT_MASK 0x0f /* Parameter set count mask */ -#define WME_QI_AP_COUNT_SHIFT 0 /* Parameter set count shift */ - -/* QoS Info field for IE as sent from STA */ -#define WME_QI_STA_MAXSPLEN_MASK 0x60 /* Max Service Period Length mask */ -#define WME_QI_STA_MAXSPLEN_SHIFT 5 /* Max Service Period Length shift */ -#define WME_QI_STA_APSD_ALL_MASK 0xf /* APSD all AC bits mask */ -#define WME_QI_STA_APSD_ALL_SHIFT 0 /* APSD all AC bits shift */ -#define WME_QI_STA_APSD_BE_MASK 0x8 /* APSD AC_BE mask */ -#define WME_QI_STA_APSD_BE_SHIFT 3 /* APSD AC_BE shift */ -#define WME_QI_STA_APSD_BK_MASK 0x4 /* APSD AC_BK mask */ -#define WME_QI_STA_APSD_BK_SHIFT 2 /* APSD AC_BK shift */ -#define WME_QI_STA_APSD_VI_MASK 0x2 /* APSD AC_VI mask */ -#define WME_QI_STA_APSD_VI_SHIFT 1 /* APSD AC_VI shift */ -#define WME_QI_STA_APSD_VO_MASK 0x1 /* APSD AC_VO mask */ -#define WME_QI_STA_APSD_VO_SHIFT 0 /* APSD AC_VO shift */ - -/* ACI */ -#define EDCF_AIFSN_MIN 1 /* AIFSN minimum value */ -#define EDCF_AIFSN_MAX 15 /* AIFSN maximum value */ -#define EDCF_AIFSN_MASK 0x0f /* AIFSN mask */ -#define EDCF_ACM_MASK 0x10 /* ACM mask */ -#define EDCF_ACI_MASK 0x60 /* ACI mask */ -#define EDCF_ACI_SHIFT 5 /* ACI shift */ - -/* ECW */ -#define EDCF_ECW_MIN 0 /* cwmin/cwmax exponent minimum value */ -#define EDCF_ECW_MAX 15 /* cwmin/cwmax exponent maximum value */ -#define EDCF_ECW2CW(exp) ((1 << (exp)) - 1) -#define EDCF_ECWMIN_MASK 0x0f /* cwmin exponent form mask */ -#define EDCF_ECWMAX_MASK 0xf0 /* cwmax exponent form mask */ -#define EDCF_ECWMAX_SHIFT 4 /* cwmax exponent form shift */ - -/* TXOP */ -#define EDCF_TXOP_MIN 0 /* TXOP minimum value */ -#define EDCF_TXOP_MAX 65535 /* TXOP maximum value */ -#define EDCF_TXOP2USEC(txop) ((txop) << 5) - -/* Default EDCF parameters that AP advertises for STA to use; WMM draft Table 12 */ -#define EDCF_AC_BE_ACI_STA 0x03 /* STA ACI value for best effort AC */ -#define EDCF_AC_BE_ECW_STA 0xA4 /* STA ECW value for best effort AC */ -#define EDCF_AC_BE_TXOP_STA 0x0000 /* STA TXOP value for best effort AC */ -#define EDCF_AC_BK_ACI_STA 0x27 /* STA ACI value for background AC */ -#define EDCF_AC_BK_ECW_STA 0xA4 /* STA ECW value for background AC */ -#define EDCF_AC_BK_TXOP_STA 0x0000 /* STA TXOP value for background AC */ -#define EDCF_AC_VI_ACI_STA 0x42 /* STA ACI value for video AC */ -#define EDCF_AC_VI_ECW_STA 0x43 /* STA ECW value for video AC */ -#define EDCF_AC_VI_TXOP_STA 0x005e /* STA TXOP value for video AC */ -#define EDCF_AC_VO_ACI_STA 0x62 /* STA ACI value for audio AC */ -#define EDCF_AC_VO_ECW_STA 0x32 /* STA ECW value for audio AC */ -#define EDCF_AC_VO_TXOP_STA 0x002f /* STA TXOP value for audio AC */ - -/* Default EDCF parameters that AP uses; WMM draft Table 14 */ -#define EDCF_AC_BE_ACI_AP 0x03 /* AP ACI value for best effort AC */ -#define EDCF_AC_BE_ECW_AP 0x64 /* AP ECW value for best effort AC */ -#define EDCF_AC_BE_TXOP_AP 0x0000 /* AP TXOP value for best effort AC */ -#define EDCF_AC_BK_ACI_AP 0x27 /* AP ACI value for background AC */ -#define EDCF_AC_BK_ECW_AP 0xA4 /* AP ECW value for background AC */ -#define EDCF_AC_BK_TXOP_AP 0x0000 /* AP TXOP value for background AC */ -#define EDCF_AC_VI_ACI_AP 0x41 /* AP ACI value for video AC */ -#define EDCF_AC_VI_ECW_AP 0x43 /* AP ECW value for video AC */ -#define EDCF_AC_VI_TXOP_AP 0x005e /* AP TXOP value for video AC */ -#define EDCF_AC_VO_ACI_AP 0x61 /* AP ACI value for audio AC */ -#define EDCF_AC_VO_ECW_AP 0x32 /* AP ECW value for audio AC */ -#define EDCF_AC_VO_TXOP_AP 0x002f /* AP TXOP value for audio AC */ - -struct dot11_qbss_load_ie { - uint8 id; /* 11, DOT11_MNG_QBSS_LOAD_ID */ - uint8 length; - uint16 station_count; /* total number of STAs associated */ - uint8 channel_utilization; /* % of time, normalized to 255, QAP sensed medium busy */ - uint16 aac; /* available admission capacity */ -} PACKED; -typedef struct dot11_qbss_load_ie dot11_qbss_load_ie_t; - -/* nom_msdu_size */ -#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */ -#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */ - -/* surplus_bandwidth */ -/* Represented as 3 bits of integer, binary point, 13 bits fraction */ -#define INTEGER_SHIFT 13 /* integer shift */ -#define FRACTION_MASK 0x1FFF /* fraction mask */ - -/* Management Notification Frame */ -struct dot11_management_notification { - uint8 category; /* DOT11_ACTION_NOTIFICATION */ - uint8 action; - uint8 token; - uint8 status; - uint8 data[1]; /* Elements */ -} PACKED; -#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */ - -/* WME Action Codes */ -#define WME_ADDTS_REQUEST 0 /* WME ADDTS request */ -#define WME_ADDTS_RESPONSE 1 /* WME ADDTS response */ -#define WME_DELTS_REQUEST 2 /* WME DELTS request */ - -/* WME Setup Response Status Codes */ -#define WME_ADMISSION_ACCEPTED 0 /* WME admission accepted */ -#define WME_INVALID_PARAMETERS 1 /* WME invalide parameters */ -#define WME_ADMISSION_REFUSED 3 /* WME admission refused */ - -/* Macro to take a pointer to a beacon or probe response - * header and return the char* pointer to the SSID info element - */ -#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN) - -/* Authentication frame payload constants */ -#define DOT11_OPEN_SYSTEM 0 /* d11 open authentication */ -#define DOT11_SHARED_KEY 1 /* d11 shared authentication */ -#define DOT11_CHALLENGE_LEN 128 /* d11 chanllenge text length */ - -/* Frame control macros */ -#define FC_PVER_MASK 0x3 /* PVER mask */ -#define FC_PVER_SHIFT 0 /* PVER shift */ -#define FC_TYPE_MASK 0xC /* type mask */ -#define FC_TYPE_SHIFT 2 /* type shift */ -#define FC_SUBTYPE_MASK 0xF0 /* subtype mask */ -#define FC_SUBTYPE_SHIFT 4 /* subtype shift */ -#define FC_TODS 0x100 /* to DS */ -#define FC_TODS_SHIFT 8 /* to DS shift */ -#define FC_FROMDS 0x200 /* from DS */ -#define FC_FROMDS_SHIFT 9 /* from DS shift */ -#define FC_MOREFRAG 0x400 /* more frag. */ -#define FC_MOREFRAG_SHIFT 10 /* more frag. shift */ -#define FC_RETRY 0x800 /* retry */ -#define FC_RETRY_SHIFT 11 /* retry shift */ -#define FC_PM 0x1000 /* PM */ -#define FC_PM_SHIFT 12 /* PM shift */ -#define FC_MOREDATA 0x2000 /* more data */ -#define FC_MOREDATA_SHIFT 13 /* more data shift */ -#define FC_WEP 0x4000 /* WEP */ -#define FC_WEP_SHIFT 14 /* WEP shift */ -#define FC_ORDER 0x8000 /* order */ -#define FC_ORDER_SHIFT 15 /* order shift */ - -/* sequence control macros */ -#define SEQNUM_SHIFT 4 /* seq. number shift */ -#define SEQNUM_MAX 0x1000 /* max seqnum + 1 */ -#define FRAGNUM_MASK 0xF /* frag. number mask */ - -/* Frame Control type/subtype defs */ - -/* FC Types */ -#define FC_TYPE_MNG 0 /* management type */ -#define FC_TYPE_CTL 1 /* control type */ -#define FC_TYPE_DATA 2 /* data type */ - -/* Management Subtypes */ -#define FC_SUBTYPE_ASSOC_REQ 0 /* assoc. request */ -#define FC_SUBTYPE_ASSOC_RESP 1 /* assoc. response */ -#define FC_SUBTYPE_REASSOC_REQ 2 /* reassoc. request */ -#define FC_SUBTYPE_REASSOC_RESP 3 /* reassoc. response */ -#define FC_SUBTYPE_PROBE_REQ 4 /* probe request */ -#define FC_SUBTYPE_PROBE_RESP 5 /* probe response */ -#define FC_SUBTYPE_BEACON 8 /* beacon */ -#define FC_SUBTYPE_ATIM 9 /* ATIM */ -#define FC_SUBTYPE_DISASSOC 10 /* disassoc. */ -#define FC_SUBTYPE_AUTH 11 /* authentication */ -#define FC_SUBTYPE_DEAUTH 12 /* de-authentication */ -#define FC_SUBTYPE_ACTION 13 /* action */ - -/* Control Subtypes */ -#define FC_SUBTYPE_BLOCKACK_REQ 8 /* Block Ack Req */ -#define FC_SUBTYPE_BLOCKACK 9 /* Block Ack */ -#define FC_SUBTYPE_PS_POLL 10 /* PS poll */ -#define FC_SUBTYPE_RTS 11 /* RTS */ -#define FC_SUBTYPE_CTS 12 /* CTS */ -#define FC_SUBTYPE_ACK 13 /* ACK */ -#define FC_SUBTYPE_CF_END 14 /* CF-END */ -#define FC_SUBTYPE_CF_END_ACK 15 /* CF-END ACK */ - -/* Data Subtypes */ -#define FC_SUBTYPE_DATA 0 /* Data */ -#define FC_SUBTYPE_DATA_CF_ACK 1 /* Data + CF-ACK */ -#define FC_SUBTYPE_DATA_CF_POLL 2 /* Data + CF-Poll */ -#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 /* Data + CF-Ack + CF-Poll */ -#define FC_SUBTYPE_NULL 4 /* Null */ -#define FC_SUBTYPE_CF_ACK 5 /* CF-Ack */ -#define FC_SUBTYPE_CF_POLL 6 /* CF-Poll */ -#define FC_SUBTYPE_CF_ACK_POLL 7 /* CF-Ack + CF-Poll */ -#define FC_SUBTYPE_QOS_DATA 8 /* QoS Data */ -#define FC_SUBTYPE_QOS_DATA_CF_ACK 9 /* QoS Data + CF-Ack */ -#define FC_SUBTYPE_QOS_DATA_CF_POLL 10 /* QoS Data + CF-Poll */ -#define FC_SUBTYPE_QOS_DATA_CF_ACK_POLL 11 /* QoS Data + CF-Ack + CF-Poll */ -#define FC_SUBTYPE_QOS_NULL 12 /* QoS Null */ -#define FC_SUBTYPE_QOS_CF_POLL 14 /* QoS CF-Poll */ -#define FC_SUBTYPE_QOS_CF_ACK_POLL 15 /* QoS CF-Ack + CF-Poll */ - -/* Data Subtype Groups */ -#define FC_SUBTYPE_ANY_QOS(s) (((s) & 8) != 0) -#define FC_SUBTYPE_ANY_NULL(s) (((s) & 4) != 0) -#define FC_SUBTYPE_ANY_CF_POLL(s) (((s) & 2) != 0) -#define FC_SUBTYPE_ANY_CF_ACK(s) (((s) & 1) != 0) - -/* Type/Subtype Combos */ -#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) /* FC kind mask */ - -#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) /* FC kind */ - -#define FC_SUBTYPE(fc) (((fc) & FC_SUBTYPE_MASK) >> FC_SUBTYPE_SHIFT) /* Subtype from FC */ -#define FC_TYPE(fc) (((fc) & FC_TYPE_MASK) >> FC_TYPE_SHIFT) /* Type from FC */ - -#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) /* assoc. request */ -#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) /* assoc. response */ -#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) /* reassoc. request */ -#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) /* reassoc. response */ -#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) /* probe request */ -#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) /* probe response */ -#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) /* beacon */ -#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) /* disassoc */ -#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) /* authentication */ -#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) /* deauthentication */ -#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) /* action */ - -#define FC_BLOCKACK_REQ FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK_REQ) /* Block Ack Req */ -#define FC_BLOCKACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK) /* Block Ack */ -#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) /* PS poll */ -#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) /* RTS */ -#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) /* CTS */ -#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) /* ACK */ -#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) /* CF-END */ -#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) /* CF-END ACK */ - -#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) /* data */ -#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) /* null data */ -#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) /* data CF ACK */ -#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA) /* QoS data */ -#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL) /* QoS null */ - -/* QoS Control Field */ - -/* 802.1D Priority */ -#define QOS_PRIO_SHIFT 0 /* QoS priority shift */ -#define QOS_PRIO_MASK 0x0007 /* QoS priority mask */ -#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT) /* QoS priority */ - -/* Traffic Identifier */ -#define QOS_TID_SHIFT 0 /* QoS TID shift */ -#define QOS_TID_MASK 0x000f /* QoS TID mask */ -#define QOS_TID(qos) (((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT) /* QoS TID */ - -/* End of Service Period (U-APSD) */ -#define QOS_EOSP_SHIFT 4 /* QoS End of Service Period shift */ -#define QOS_EOSP_MASK 0x0010 /* QoS End of Service Period mask */ -#define QOS_EOSP(qos) (((qos) & QOS_EOSP_MASK) >> QOS_EOSP_SHIFT) /* Qos EOSP */ - -/* Ack Policy */ -#define QOS_ACK_NORMAL_ACK 0 /* Normal Ack */ -#define QOS_ACK_NO_ACK 1 /* No Ack (eg mcast) */ -#define QOS_ACK_NO_EXP_ACK 2 /* No Explicit Ack */ -#define QOS_ACK_BLOCK_ACK 3 /* Block Ack */ -#define QOS_ACK_SHIFT 5 /* QoS ACK shift */ -#define QOS_ACK_MASK 0x0060 /* QoS ACK mask */ -#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT) /* QoS ACK */ - -/* A-MSDU flag */ -#define QOS_AMSDU_SHIFT 7 /* AMSDU shift */ -#define QOS_AMSDU_MASK 0x0080 /* AMSDU mask */ - -/* Management Frames */ - -/* Management Frame Constants */ - -/* Fixed fields */ -#define DOT11_MNG_AUTH_ALGO_LEN 2 /* d11 management auth. algo. length */ -#define DOT11_MNG_AUTH_SEQ_LEN 2 /* d11 management auth. seq. length */ -#define DOT11_MNG_BEACON_INT_LEN 2 /* d11 management beacon interval length */ -#define DOT11_MNG_CAP_LEN 2 /* d11 management cap. length */ -#define DOT11_MNG_AP_ADDR_LEN 6 /* d11 management AP address length */ -#define DOT11_MNG_LISTEN_INT_LEN 2 /* d11 management listen interval length */ -#define DOT11_MNG_REASON_LEN 2 /* d11 management reason length */ -#define DOT11_MNG_AID_LEN 2 /* d11 management AID length */ -#define DOT11_MNG_STATUS_LEN 2 /* d11 management status length */ -#define DOT11_MNG_TIMESTAMP_LEN 8 /* d11 management timestamp length */ - -/* DUR/ID field in assoc resp is 0xc000 | AID */ -#define DOT11_AID_MASK 0x3fff /* d11 AID mask */ - -/* Reason Codes */ -#define DOT11_RC_RESERVED 0 /* d11 RC reserved */ -#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */ -#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer - * valid - */ -#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station - * is leaving (or has left) IBSS or ESS - */ -#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */ -#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable - * to handle all currently associated - * stations - */ -#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from - * nonauthenticated station - */ -#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from - * nonassociated station - */ -#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is - * leaving (or has left) BSS - */ -#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is - * not authenticated with responding - * station - */ -#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */ - -/* Status Codes */ -#define DOT11_STATUS_SUCCESS 0 /* Successful */ -#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */ -#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested - * capabilities in the Capability - * Information field - */ -#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability - * to confirm that association exists - */ -#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason - * outside the scope of this standard - */ -#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support - * the specified authentication - * algorithm - */ -#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame - * with authentication transaction - * sequence number out of expected - * sequence - */ -#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of - * challenge failure - */ -#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout - * waiting for next frame in sequence - */ -#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is - * unable to handle additional - * associated stations - */ -#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting - * station not supporting all of the - * data rates in the BSSBasicRateSet - * parameter - */ -#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting - * station not supporting the Short - * Preamble option - */ -#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting - * station not supporting the PBCC - * Modulation option - */ -#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting - * station not supporting the Channel - * Agility option - */ -#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum - * Management capability is required. - */ -#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info - * in the Power Cap element is - * unacceptable. - */ -#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info - * in the Supported Channel element is - * unacceptable - */ -#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting - * station not supporting the Short Slot - * Time option - */ -#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting - * station not supporting the ER-PBCC - * Modulation option - */ -#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting - * station not supporting the DSS-OFDM - * option - */ - -/* Info Elts, length of INFORMATION portion of Info Elts */ -#define DOT11_MNG_DS_PARAM_LEN 1 /* d11 management DS parameter length */ -#define DOT11_MNG_IBSS_PARAM_LEN 2 /* d11 management IBSS parameter length */ - -/* TIM Info element has 3 bytes fixed info in INFORMATION field, - * followed by 1 to 251 bytes of Partial Virtual Bitmap - */ -#define DOT11_MNG_TIM_FIXED_LEN 3 /* d11 management TIM fixed length */ -#define DOT11_MNG_TIM_DTIM_COUNT 0 /* d11 management DTIM count */ -#define DOT11_MNG_TIM_DTIM_PERIOD 1 /* d11 management DTIM period */ -#define DOT11_MNG_TIM_BITMAP_CTL 2 /* d11 management TIM BITMAP control */ -#define DOT11_MNG_TIM_PVB 3 /* d11 management TIM PVB */ - -/* TLV defines */ -#define TLV_TAG_OFF 0 /* tag offset */ -#define TLV_LEN_OFF 1 /* length offset */ -#define TLV_HDR_LEN 2 /* header length */ -#define TLV_BODY_OFF 2 /* body offset */ - -/* Management Frame Information Element IDs */ -#define DOT11_MNG_SSID_ID 0 /* d11 management SSID id */ -#define DOT11_MNG_RATES_ID 1 /* d11 management rates id */ -#define DOT11_MNG_FH_PARMS_ID 2 /* d11 management FH parameter id */ -#define DOT11_MNG_DS_PARMS_ID 3 /* d11 management DS parameter id */ -#define DOT11_MNG_CF_PARMS_ID 4 /* d11 management CF parameter id */ -#define DOT11_MNG_TIM_ID 5 /* d11 management TIM id */ -#define DOT11_MNG_IBSS_PARMS_ID 6 /* d11 management IBSS parameter id */ -#define DOT11_MNG_COUNTRY_ID 7 /* d11 management country id */ -#define DOT11_MNG_HOPPING_PARMS_ID 8 /* d11 management hopping parameter id */ -#define DOT11_MNG_HOPPING_TABLE_ID 9 /* d11 management hopping table id */ -#define DOT11_MNG_REQUEST_ID 10 /* d11 management request id */ -#define DOT11_MNG_QBSS_LOAD_ID 11 /* d11 management QBSS Load id */ -#define DOT11_MNG_CHALLENGE_ID 16 /* d11 management chanllenge id */ -#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */ -#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */ -#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */ -#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */ -#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */ -#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement */ -#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */ -#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */ -#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */ -#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */ -#define DOT11_MNG_ERP_ID 42 /* d11 management ERP id */ -#define DOT11_MNG_TS_DELAY_ID 43 /* d11 management TS Delay id */ -#define DOT11_MNG_NONERP_ID 47 /* d11 management NON-ERP id */ -#define DOT11_MNG_RSN_ID 48 /* d11 management RSN id */ -#define DOT11_MNG_EXT_RATES_ID 50 /* d11 management ext. rates id */ -#define DOT11_MNG_WPA_ID 221 /* d11 management WPA id */ -#define DOT11_MNG_PROPR_ID 221 /* d11 management proprietary id */ - -/* Rate element Basic flag and rate mask */ -#define DOT11_RATE_BASIC 0x80 /* flag for a Basic Rate */ -#define DOT11_RATE_MASK 0x7F /* mask for numeric part of rate */ - -/* ERP info element bit values */ -#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */ -#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present - *in the BSS - */ -#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for - *ERP-OFDM frames - */ -#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, - * 1 == not allowed - */ -/* TS Delay element offset & size */ -#define DOT11_MGN_TS_DELAY_LEN 4 /* length of TS DELAY IE */ -#define TS_DELAY_FIELD_SIZE 4 /* TS DELAY field size */ - -/* Capability Information Field */ -#define DOT11_CAP_ESS 0x0001 /* d11 cap. ESS */ -#define DOT11_CAP_IBSS 0x0002 /* d11 cap. IBSS */ -#define DOT11_CAP_POLLABLE 0x0004 /* d11 cap. pollable */ -#define DOT11_CAP_POLL_RQ 0x0008 /* d11 cap. poll request */ -#define DOT11_CAP_PRIVACY 0x0010 /* d11 cap. privacy */ -#define DOT11_CAP_SHORT 0x0020 /* d11 cap. short */ -#define DOT11_CAP_PBCC 0x0040 /* d11 cap. PBCC */ -#define DOT11_CAP_AGILITY 0x0080 /* d11 cap. agility */ -#define DOT11_CAP_SPECTRUM 0x0100 /* d11 cap. spectrum */ -#define DOT11_CAP_SHORTSLOT 0x0400 /* d11 cap. shortslot */ -#define DOT11_CAP_CCK_OFDM 0x2000 /* d11 cap. CCK/OFDM */ - -/* Action Frame Constants */ -#define DOT11_ACTION_CAT_ERR_MASK 0x80 /* d11 action category error mask */ -#define DOT11_ACTION_CAT_MASK 0x7F /* d11 action category mask */ -#define DOT11_ACTION_CAT_SPECT_MNG 0x00 /* d11 action category spectrum management */ -#define DOT11_ACTION_CAT_BLOCKACK 0x03 /* d11 action category block ack */ -#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */ - -#define DOT11_ACTION_ID_M_REQ 0 /* d11 action measurement request */ -#define DOT11_ACTION_ID_M_REP 1 /* d11 action measurement response */ -#define DOT11_ACTION_ID_TPC_REQ 2 /* d11 action TPC request */ -#define DOT11_ACTION_ID_TPC_REP 3 /* d11 action TPC response */ -#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 /* d11 action channel switch */ - -/* HT (EWC) action ids */ -#define DOT11_ACTION_ID_HT_CH_WIDTH 0 /* mimo ps action frame id */ -#define DOT11_ACTION_ID_HT_MIMO_PS 1 /* mimo ps action frame id */ - -/* Block Ack action types */ -#define DOT11_BA_ACTION_ADDBA_REQ 0 /* ADDBA Req action frame type */ -#define DOT11_BA_ACTION_ADDBA_RESP 1 /* ADDBA Resp action frame type */ -#define DOT11_BA_ACTION_DELBA 2 /* DELBA action frame type */ - -/* ADDBA action parameters */ -#define DOT11_ADDBA_PARAM_POLICY_MASK 0x0002 /* policy mask(ack vs delayed) */ -#define DOT11_ADDBA_PARAM_POLICY_SHIFT 1 /* policy shift */ -#define DOT11_ADDBA_PARAM_TID_MASK 0x003c /* tid mask */ -#define DOT11_ADDBA_PARAM_TID_SHIFT 2 /* tid shift */ -#define DOT11_ADDBA_PARAM_BSIZE_MASK 0xffc0 /* buffer size mask */ -#define DOT11_ADDBA_PARAM_BSIZE_SHIFT 6 /* buffer size shift */ - -#define DOT11_ADDBA_POLICY_DELAYED 0 /* delayed BA policy */ -#define DOT11_ADDBA_POLICY_IMMEDIATE 1 /* immediate BA policy */ - -struct dot11_addba_req { - uint8 category; /* category of action frame (3) */ - uint8 action; /* action: addba req */ - uint8 token; /* identifier */ - uint16 addba_param_set; /* parameter set */ - uint16 timeout; /* timeout in seconds */ - uint16 start_seqnum; /* starting sequence number */ -}PACKED; -typedef struct dot11_addba_req dot11_addba_req_t; -#define DOT11_ADDBA_REQ_LEN 9 /* length of addba req frame */ - -struct dot11_addba_resp { - uint8 category; /* category of action frame (3) */ - uint8 action; /* action: addba resp */ - uint8 token; /* identifier */ - uint16 status; /* status of add request */ - uint16 addba_param_set; /* negotiated parameter set */ - uint16 timeout; /* negotiated timeout in seconds */ -}PACKED; -typedef struct dot11_addba_resp dot11_addba_resp_t; -#define DOT11_ADDBA_RESP_LEN 9 /* length of addba resp frame */ - -/* DELBA action parameters */ -#define DOT11_DELBA_PARAM_INIT_MASK 0x0800 /* initiator mask */ -#define DOT11_DELBA_PARAM_INIT_SHIFT 11 /* initiator shift */ -#define DOT11_DELBA_PARAM_TID_MASK 0xf000 /* tid mask */ -#define DOT11_DELBA_PARAM_TID_SHIFT 12 /* tid shift */ - -struct dot11_delba { - uint8 category; /* category of action frame (3) */ - uint8 action; /* action: addba req */ - uint16 delba_param_set; /* paarmeter set */ - uint16 reason; /* reason for dellba */ -}PACKED; -typedef struct dot11_delba dot11_delba_t; -#define DOT11_DELBA_LEN 6 /* length of delba frame */ - -/* MLME Enumerations */ -#define DOT11_BSSTYPE_INFRASTRUCTURE 0 /* d11 infrastructure */ -#define DOT11_BSSTYPE_INDEPENDENT 1 /* d11 independent */ -#define DOT11_BSSTYPE_ANY 2 /* d11 any BSS type */ -#define DOT11_SCANTYPE_ACTIVE 0 /* d11 scan active */ -#define DOT11_SCANTYPE_PASSIVE 1 /* d11 scan passive */ - -/* 802.11 BRCM "Compromise" Pre N constants */ -#define PREN_PREAMBLE 24 /* green field preamble time */ -#define PREN_MM_EXT 16 /* extra mixed mode preamble time */ -#define PREN_PREAMBLE_EXT 4 /* extra preamble (multiply by unique_streams-1) */ - -/* 802.11 A PHY constants */ -#define APHY_SLOT_TIME 9 /* APHY slot time */ -#define APHY_SIFS_TIME 16 /* APHY SIFS time */ -#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) /* APHY DIFS time */ -#define APHY_PREAMBLE_TIME 16 /* APHY preamble time */ -#define APHY_SIGNAL_TIME 4 /* APHY signal time */ -#define APHY_SYMBOL_TIME 4 /* APHY symbol time */ -#define APHY_SERVICE_NBITS 16 /* APHY service nbits */ -#define APHY_TAIL_NBITS 6 /* APHY tail nbits */ -#define APHY_CWMIN 15 /* APHY cwmin */ - -/* 802.11 B PHY constants */ -#define BPHY_SLOT_TIME 20 /* BPHY slot time */ -#define BPHY_SIFS_TIME 10 /* BPHY SIFS time */ -#define BPHY_DIFS_TIME 50 /* BPHY DIFS time */ -#define BPHY_PLCP_TIME 192 /* BPHY PLCP time */ -#define BPHY_PLCP_SHORT_TIME 96 /* BPHY PLCP short time */ -#define BPHY_CWMIN 31 /* BPHY cwmin */ - -/* 802.11 G constants */ -#define DOT11_OFDM_SIGNAL_EXTENSION 6 /* d11 OFDM signal extension */ - -#define PHY_CWMAX 1023 /* PHY cwmax */ - -#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */ - -/* dot11Counters Table - 802.11 spec., Annex D */ -typedef struct d11cnt { - uint32 txfrag; /* dot11TransmittedFragmentCount */ - uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ - uint32 txfail; /* dot11FailedCount */ - uint32 txretry; /* dot11RetryCount */ - uint32 txretrie; /* dot11MultipleRetryCount */ - uint32 rxdup; /* dot11FrameduplicateCount */ - uint32 txrts; /* dot11RTSSuccessCount */ - uint32 txnocts; /* dot11RTSFailureCount */ - uint32 txnoack; /* dot11ACKFailureCount */ - uint32 rxfrag; /* dot11ReceivedFragmentCount */ - uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ - uint32 rxcrc; /* dot11FCSErrorCount */ - uint32 txfrmsnt; /* dot11TransmittedFrameCount */ - uint32 rxundec; /* dot11WEPUndecryptableCount */ -} d11cnt_t; - -/* BRCM OUI */ -#define BRCM_OUI "\x00\x10\x18" /* Broadcom OUI */ - -/* OUI for BRCM proprietary IE */ -#define BRCM_PROP_OUI "\x00\x90\x4C" /* Broadcom proprietary OUI */ - -/* BRCM info element */ -struct brcm_ie { - uint8 id; /* IE ID, 221, DOT11_MNG_PROPR_ID */ - uint8 len; /* IE length */ - uint8 oui[3]; /* Proprietary OUI, BRCM_OUI */ - uint8 ver; /* type/ver of this IE */ - uint8 assoc; /* # of assoc STAs */ - uint8 flags; /* misc flags */ - uint8 flags1; /* misc flags */ - uint16 amsdu_mtu_pref; /* preferred A-MSDU MTU */ -} PACKED; -typedef struct brcm_ie brcm_ie_t; -#define BRCM_IE_LEN 11 /* BRCM IE length */ -#define BRCM_IE_VER 2 /* BRCM IE version */ -#define BRCM_IE_LEGACY_AES_VER 1 /* BRCM IE legacy AES version */ - -/* brcm_ie flags */ -#define BRF_ABCAP 0x1 /* afterburner capable */ -#define BRF_ABRQRD 0x2 /* afterburner requested */ -#define BRF_LZWDS 0x4 /* lazy wds enabled */ -#define BRF_BLOCKACK 0x8 /* BlockACK capable */ -#define BRF_ABCOUNTER_MASK 0xf0 /* afterburner wds "state" counter */ -#define BRF_ABCOUNTER_SHIFT 4 /* offset of afterburner wds "state" counter */ - -/* brcm_ie flags1 */ -#define BRF1_AMSDU 0x1 /* A-MSDU capable */ - -#define AB_WDS_TIMEOUT_MAX 15 /* afterburner wds Max count indicating not - * locally capable - */ -#define AB_WDS_TIMEOUT_MIN 1 /* afterburner wds, use zero count as indicating - * "downrev" - */ - -/* EWC definitions */ -#define MCSSET_LEN 16 /* 16-bits per 8-bit set to give 128-bits bitmap of MCS Index */ - -struct ewc_cap { - uint16 cap; - uint8 params; - uint8 supp_mcs[MCSSET_LEN]; - uint16 ext_htcap; - uint32 txbf_cap; - uint8 as_cap; -} PACKED; -typedef struct ewc_cap ewc_cap_t; - -/* CAP IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */ -/* the capability IE is primarily used to convey this nodes abilities */ -struct ewc_cap_ie { - uint8 id; /* IE ID, 221, DOT11_MNG_PROPR_ID */ - uint8 len; /* IE length */ - uint8 oui[3]; /* Proprietary OUI, BRCM_PROP_OUI */ - uint8 type; /* type inidicates what follows */ - ewc_cap_t cap; -} PACKED; -typedef struct ewc_cap_ie ewc_cap_ie_t; - -#define EWC_CAP_IE_LEN (26+4) -#define EWC_CAP_IE_TYPE 51 - -#define EWC_CAP_ADC_CODING 0x0001 /* Advance coding support */ -#define EWC_CAP_40MHZ 0x0002 /* FALSE:20Mhz, TRUE: 20 and 40MHZ supported */ -#define EWC_CAP_MIMO_PS_MASK 0x000C /* Mimo PS mask */ -#define EWC_CAP_MIMO_PS_SHIFT 0x0002 /* Mimo PS shift */ -#define EWC_CAP_MIMO_PS_OFF 0x0003 /* Mimo PS, no restriction */ -#define EWC_CAP_MIMO_PS_RTS 0x0001 /* Mimo PS, send RTS/CTS around MIMO frames */ -#define EWC_CAP_MIMO_PS_ON 0x0000 /* Mimo PS, MIMO disallowed */ -#define EWC_CAP_GF 0x0010 /* Greenfield preamble support */ -#define EWC_CAP_SHORT_GI_20 0x0020 /* 20MHZ short guard interval support */ -#define EWC_CAP_SHORT_GI_40 0x0040 /* 40Mhz short guard interval support */ -#define EWC_CAP_TX_STBC 0x0080 /* Tx STBC support */ -#define EWC_CAP_RX_STBC_MASK 0x0300 /* Rx STBC mask */ -#define EWC_CAP_RX_STBC_SHIFT 8 /* Rx STBC shift */ -#define EWC_CAP_DELAYED_BA 0x0400 /* delayed BA support */ -#define EWC_CAP_MAX_AMSDU 0x0800 /* Max AMSDU size in bytes , 0=3839, 1=7935 */ -#define EWC_CAP_DSSS_CCK 0x1000 /* DSSS/CCK supported by the BSS */ -#define EWC_CAP_PSMP 0x2000 /* Power Save Multi Poll support */ -#define EWC_CAP_STBC_CTL 0x4000 /* STBC control frame support */ -#define EWC_CAP_LSIG_TXOP 0x8000 /* L-SIG TXOP protection support */ - -#define EWC_MAX_AMSDU 7935 /* max amsdu size (bytes) per the EWC spec */ -#define EWC_MIN_AMSDU 3835 /* min amsdu size (bytes) per the EWC spec */ - -#define EWC_PARAMS_RX_FACTOR_MASK 0x03 /* ampdu rcv factor mask */ -#define EWC_PARAMS_DENSITY_MASK 0x1C /* ampdu density mask */ -#define EWC_PARAMS_DENSITY_SHIFT 2 /* ampdu density shift */ - -/* EWC/AMPDU specific define */ -#define AMPDU_MAX_MPDU_DENSITY 7 /* max mpdu density; in 1/8 usec units */ -#define AMPDU_MAX_RX_FACTOR 3 /* max rcv ampdu len (64kb) */ -#define AMPDU_RX_FACTOR_BASE 8*1024 /* ampdu factor base for rx len */ -#define AMPDU_DELIMITER_LEN 4 /* length of ampdu delimiter */ - -struct ewc_add { - uint8 ctl_ch; /* control channel number */ - uint8 byte1; /* ext ch,rec. ch. width, RIFS support */ - uint16 opmode; /* operation mode */ - uint16 misc_bits; /* misc bits */ - uint8 basic_mcs[MCSSET_LEN]; /* required MCS set */ -} PACKED; -typedef struct ewc_add ewc_add_t; - -/* ADD IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */ -/* the additional IE is primarily used to convey the current BSS configuration */ -struct ewc_add_ie { - uint8 id; /* IE ID, 221, DOT11_MNG_PROPR_ID */ - uint8 len; /* IE length */ - uint8 oui[3]; /* Proprietary OUI, BRCM_PROP_OUI */ - uint8 type; /* indicates what follows */ - ewc_add_t add; -} PACKED; -typedef struct ewc_add_ie ewc_add_ie_t; - -#define EWC_ADD_IE_LEN (22+4) -#define EWC_ADD_IE_TYPE 52 - -/* byte1 defn's */ -#define EWC_EXT_CH_MASK 0x03 /* extension channel mask */ -#define EWC_EXT_CH_UPPER 0x01 /* ext. ch. on upper sb */ -#define EWC_EXT_CH_LOWER 0x03 /* ext. ch. on lower sb */ -#define EWC_EXT_CH_NONE 0x00 /* extension channel mask */ -#define EWC_BW_ANY 0x04 /* set, STA can use 20 or 40MHz */ -#define EWC_RIFS_PERMITTED 0x08 /* RIFS allowed */ - -/* opmode defn's */ -#define EWC_OPMODE_MASK 0x0003 /* protection mode mask */ -#define EWC_OPMODE_PURE 0x0000 /* protection mode PURE */ -#define EWC_OPMODE_HT20IN40 0x0002 /* protection mode 20MHz HT in 40MHz BSS */ -#define EWC_OPMODE_MIXED 0x0003 /* protection mode Mixed Mode */ -#define EWC_NONGF_PRESENT 0x0004 /* protection mode non-GF */ - -/* misc_bites defn's */ -#define EWC_BASIC_STBC_MCS 0x007f /* basic STBC MCS */ -#define EWC_DUAL_STBC_PROT 0x0080 /* Dual STBC Protection */ -#define EWC_SECOND_BCN 0x0100 /* Secondary beacon support */ -#define EWC_LSIG_TXOP 0x0200 /* L-SIG TXOP Protection full support */ -#define EWC_PCO_ACTIVE 0x0400 /* PCO active */ -#define EWC_PCO_PHASE 0x0800 /* PCO phase */ - -/* Macros for opmode */ -#define EWC_MIXEDMODE_PRESENT(add) ((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \ - == EWC_OPMODE_MIXED) /* mixed mode present */ -#define EWC_HT20_PRESENT(add) ((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \ - == EWC_OPMODE_HT20IN40) /* 20MHz HT present */ -#define EWC_USE_PROTECTION(add) (EWC_HT20_PRESENT((add)) || \ - EWC_MIXEDMODE_PRESENT((add))) /* use protection */ - -/* Vendor IE structure */ -struct vndr_ie { - uchar id; - uchar len; - uchar oui [3]; - uchar data [1]; /* Variable size data */ -}PACKED; -typedef struct vndr_ie vndr_ie_t; - -#define VNDR_IE_HDR_LEN 2 /* id + len field */ -#define VNDR_IE_MIN_LEN 3 /* size of the oui field */ -#define VNDR_IE_MAX_LEN 256 /* verdor IE max length */ - -/* WPA definitions */ -#define WPA_VERSION 1 /* WPA version */ -#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */ - -#define WPA2_VERSION 1 /* WPA2 version */ -#define WPA2_VERSION_LEN 2 /* WAP2 version length */ -#define WPA2_OUI "\x00\x0F\xAC" /* WPA2 OUI */ - -#define WPA_OUI_LEN 3 /* WPA OUI length */ - -/* RSN authenticated key managment suite */ -#define RSN_AKM_NONE 0 /* None (IBSS) */ -#define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */ -#define RSN_AKM_PSK 2 /* Pre-shared Key */ - -/* Key related defines */ -#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */ -#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */ -#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */ -#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */ - -#define WEP1_KEY_SIZE 5 /* max size of any WEP key */ -#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */ -#define WEP128_KEY_SIZE 13 /* max size of any WEP key */ -#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */ -#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */ -#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */ -#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */ -#define TKIP_KEY_SIZE 32 /* size of any TKIP key */ -#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */ -#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */ -#define TKIP_MIC_SUP_RX TKIP_MIC_AUTH_TX /* offset to Supplicant MIC RX key */ -#define TKIP_MIC_SUP_TX TKIP_MIC_AUTH_RX /* offset to Supplicant MIC TX key */ -#define AES_KEY_SIZE 16 /* size of AES key */ - -#undef PACKED -#if !defined(__GNUC__) -#pragma pack() -#endif - -#endif /* _802_11_H_ */ diff --git a/package/broadcom-wl-old/src/include/proto/bcmeth.h b/package/broadcom-wl-old/src/include/proto/bcmeth.h deleted file mode 100644 index 417eddeafc..0000000000 --- a/package/broadcom-wl-old/src/include/proto/bcmeth.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Broadcom Ethernettype protocol definitions - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - */ - -/* - * Broadcom Ethernet protocol defines - */ - -#ifndef _BCMETH_H_ -#define _BCMETH_H_ - -/* enable structure packing */ -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#pragma pack(1) -#define PACKED -#endif - -/* ETHER_TYPE_BRCM is defined in ethernet.h */ - -/* - * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field - * in one of two formats: (only subtypes 32768-65535 are in use now) - * - * subtypes 0-32767: - * 8 bit subtype (0-127) - * 8 bit length in bytes (0-255) - * - * subtypes 32768-65535: - * 16 bit big-endian subtype - * 16 bit big-endian length in bytes (0-65535) - * - * length is the number of additional bytes beyond the 4 or 6 byte header - * - * Reserved values: - * 0 reserved - * 5-15 reserved for iLine protocol assignments - * 17-126 reserved, assignable - * 127 reserved - * 32768 reserved - * 32769-65534 reserved, assignable - * 65535 reserved - */ - -/* - * While adding the subtypes and their specific processing code make sure - * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition - */ - -#define BCMILCP_SUBTYPE_RATE 1 -#define BCMILCP_SUBTYPE_LINK 2 -#define BCMILCP_SUBTYPE_CSA 3 -#define BCMILCP_SUBTYPE_LARQ 4 -#define BCMILCP_SUBTYPE_VENDOR 5 -#define BCMILCP_SUBTYPE_FLH 17 - -#define BCMILCP_SUBTYPE_VENDOR_LONG 32769 -#define BCMILCP_SUBTYPE_CERT 32770 -#define BCMILCP_SUBTYPE_SES 32771 - - -#define BCMILCP_BCM_SUBTYPE_RESERVED 0 -#define BCMILCP_BCM_SUBTYPE_EVENT 1 -#define BCMILCP_BCM_SUBTYPE_SES 2 -/* - * The EAPOL type is not used anymore. Instead EAPOL messages are now embedded - * within BCMILCP_BCM_SUBTYPE_EVENT type messages - */ -/* #define BCMILCP_BCM_SUBTYPE_EAPOL 3 */ - -#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH 8 -#define BCMILCP_BCM_SUBTYPEHDR_VERSION 0 - -/* These fields are stored in network order */ -typedef struct bcmeth_hdr -{ - uint16 subtype; /* Vendor specific..32769 */ - uint16 length; - uint8 version; /* Version is 0 */ - uint8 oui[3]; /* Broadcom OUI */ - /* user specific Data */ - uint16 usr_subtype; -} PACKED bcmeth_hdr_t; - -#undef PACKED -#if !defined(__GNUC__) -#pragma pack() -#endif - -#endif /* _BCMETH_H_ */ diff --git a/package/broadcom-wl-old/src/include/proto/bcmevent.h b/package/broadcom-wl-old/src/include/proto/bcmevent.h deleted file mode 100644 index 6adb53cb96..0000000000 --- a/package/broadcom-wl-old/src/include/proto/bcmevent.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Broadcom Event protocol definitions - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * - * Dependencies: proto/bcmeth.h - * - * - */ - -/* - * Broadcom Ethernet Events protocol defines - * - */ - -#ifndef _BCMEVENT_H_ -#define _BCMEVENT_H_ - -/* enable structure packing */ -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#pragma pack(1) -#define PACKED -#endif /* defined(__GNUC__) */ - -#define BCM_EVENT_MSG_VERSION 1 /* wl_event_msg_t struct version */ -#define BCM_MSG_IFNAME_MAX 16 /* max length of interface name */ - -/* flags */ -#define WLC_EVENT_MSG_LINK 0x01 /* link is up */ -#define WLC_EVENT_MSG_FLUSHTXQ 0x02 /* flush tx queue on MIC error */ -#define WLC_EVENT_MSG_GROUP 0x04 /* group MIC error */ - -/* theses fields are stored in network order */ -typedef struct -{ - uint16 version; - uint16 flags; /* see flags below */ - uint32 event_type; /* Message (see below) */ - uint32 status; /* Status code (see below) */ - uint32 reason; /* Reason code (if applicable) */ - uint32 auth_type; /* WLC_E_AUTH */ - uint32 datalen; /* data buf */ - struct ether_addr addr; /* Station address (if applicable) */ - char ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */ -} PACKED wl_event_msg_t; - -/* used by driver msgs */ -typedef struct bcm_event { - struct ether_header eth; - bcmeth_hdr_t bcm_hdr; - wl_event_msg_t event; - /* data portion follows */ -} PACKED bcm_event_t; - -#define BCM_MSG_LEN (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header)) - -/* Event messages */ -#define WLC_E_SET_SSID 0 /* indicates status of set SSID */ -#define WLC_E_JOIN 1 /* differentiates join IBSS from found (WLC_E_START) IBSS */ -#define WLC_E_START 2 /* STA founded an IBSS or AP started a BSS */ -#define WLC_E_AUTH 3 /* 802.11 AUTH request */ -#define WLC_E_AUTH_IND 4 /* 802.11 AUTH indication */ -#define WLC_E_DEAUTH 5 /* 802.11 DEAUTH request */ -#define WLC_E_DEAUTH_IND 6 /* 802.11 DEAUTH indication */ -#define WLC_E_ASSOC 7 /* 802.11 ASSOC request */ -#define WLC_E_ASSOC_IND 8 /* 802.11 ASSOC indication */ -#define WLC_E_REASSOC 9 /* 802.11 REASSOC request */ -#define WLC_E_REASSOC_IND 10 /* 802.11 REASSOC indication */ -#define WLC_E_DISASSOC 11 /* 802.11 DISASSOC request */ -#define WLC_E_DISASSOC_IND 12 /* 802.11 DISASSOC indication */ -#define WLC_E_QUIET_START 13 /* 802.11h Quiet period started */ -#define WLC_E_QUIET_END 14 /* 802.11h Quiet period ended */ -#define WLC_E_BEACON_RX 15 /* BEACONS received/lost indication */ -#define WLC_E_LINK 16 /* generic link indication */ -#define WLC_E_MIC_ERROR 17 /* TKIP MIC error occurred */ -#define WLC_E_NDIS_LINK 18 /* NDIS style link indication */ -#define WLC_E_ROAM 19 /* roam attempt occurred: indicate status & reason */ -#define WLC_E_TXFAIL 20 /* change in dot11FailedCount (txfail) */ -#define WLC_E_PMKID_CACHE 21 /* WPA2 pmkid cache indication */ -#define WLC_E_RETROGRADE_TSF 22 /* current AP's TSF value went backward */ -#define WLC_E_PRUNE 23 /* AP was pruned from join list for reason */ -#define WLC_E_AUTOAUTH 24 /* report AutoAuth table entry match for join attempt */ -#define WLC_E_EAPOL_MSG 25 /* Event encapsulating an EAPOL message */ -#define WLC_E_SCAN_COMPLETE 26 /* Scan results are ready or scan was aborted */ -#define WLC_E_ADDTS_IND 27 /* indicate to host addts fail/success */ -#define WLC_E_DELTS_IND 28 /* indicate to host delts fail/success */ -#define WLC_E_BCNSENT_IND 29 /* indicate to host of beacon transmit */ -#define WLC_E_BCNRX_MSG 30 /* Send the received beacon up to the host */ -#define WLC_E_LAST 31 /* highest val + 1 for range checking */ - -/* Event status codes */ -#define WLC_E_STATUS_SUCCESS 0 /* operation was successful */ -#define WLC_E_STATUS_FAIL 1 /* operation failed */ -#define WLC_E_STATUS_TIMEOUT 2 /* operation timed out */ -#define WLC_E_STATUS_NO_NETWORKS 3 /* failed due to no matching network found */ -#define WLC_E_STATUS_ABORT 4 /* operation was aborted */ -#define WLC_E_STATUS_NO_ACK 5 /* protocol failure: packet not ack'd */ -#define WLC_E_STATUS_UNSOLICITED 6 /* AUTH or ASSOC packet was unsolicited */ -#define WLC_E_STATUS_ATTEMPT 7 /* attempt to assoc to an auto auth configuration */ - -/* roam reason codes */ -#define WLC_E_REASON_INITIAL_ASSOC 0 /* initial assoc */ -#define WLC_E_REASON_LOW_RSSI 1 /* roamed due to low RSSI */ -#define WLC_E_REASON_DEAUTH 2 /* roamed due to DEAUTH indication */ -#define WLC_E_REASON_DISASSOC 3 /* roamed due to DISASSOC indication */ -#define WLC_E_REASON_BCNS_LOST 4 /* roamed due to lost beacons */ -#define WLC_E_REASON_FAST_ROAM_FAILED 5 /* roamed due to fast roam failure */ -#define WLC_E_REASON_DIRECTED_ROAM 6 /* roamed due to request by AP */ -#define WLC_E_REASON_TSPEC_REJECTED 7 /* roamed due to TSPEC rejection */ -#define WLC_E_REASON_BETTER_AP 8 /* roamed due to finding better AP */ - -/* prune reason codes */ -#define WLC_E_PRUNE_ENCR_MISMATCH 1 /* ecryption mismatch */ -#define WLC_E_PRUNE_BCAST_BSSID 2 /* AP uses a broadcast BSSID */ -#define WLC_E_PRUNE_MAC_DENY 3 /* STA's MAC addr is in AP's MAC deny list */ -#define WLC_E_PRUNE_MAC_NA 4 /* STA's MAC addr is not in AP's MAC allow list */ -#define WLC_E_PRUNE_REG_PASSV 5 /* AP not allowed due to regulatory restriction */ -#define WLC_E_PRUNE_SPCT_MGMT 6 /* AP does not support STA locale spectrum mgmt */ -#define WLC_E_PRUNE_RADAR 7 /* AP is on a radar channel of STA locale */ -#define WLC_E_RSN_MISMATCH 8 /* STA does not support AP's RSN */ -#define WLC_E_PRUNE_NO_COMMON_RATES 9 /* No rates in common with AP */ -#define WLC_E_PRUNE_BASIC_RATES 10 /* STA does not support all basic rates of BSS */ -#define WLC_E_PRUNE_CCXFAST_PREVAP 11 /* CCX FAST ROAM: prune previous AP */ -#define WLC_E_PRUNE_CIPHER_NA 12 /* BSS's cipher not supported */ -#define WLC_E_PRUNE_KNOWN_STA 13 /* AP is already known to us as a STA */ -#define WLC_E_PRUNE_CCXFAST_DROAM 14 /* CCX FAST ROAM: prune unqulified AP */ -#define WLC_E_PRUNE_WDS_PEER 15 /* AP is already known to us as a WDS peer */ -#define WLC_E_PRUNE_QBSS_LOAD 16 /* QBSS LOAD - AAC is too low */ -#define WLC_E_PRUNE_HOME_AP 17 /* prune home AP */ - -/* WLC_SET_CALLBACK data type */ -typedef struct wlc_event_cb { - void (*fn)(void *, bcm_event_t *); /* Callback function */ - void *context; /* Passed to callback function */ -} wlc_event_cb_t; - -#undef PACKED -#if !defined(__GNUC__) -#pragma pack() -#endif /* PACKED */ - -#endif /* _BCMEVENT_H_ */ diff --git a/package/broadcom-wl-old/src/include/proto/ethernet.h b/package/broadcom-wl-old/src/include/proto/ethernet.h deleted file mode 100644 index 4e3197cb69..0000000000 --- a/package/broadcom-wl-old/src/include/proto/ethernet.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * From FreeBSD 2.2.7: Fundamental constants relating to ethernet. - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - */ - -#ifndef __NET_ETHERNET_H -#define __NET_ETHERNET_H - -#ifndef _TYPEDEFS_H_ -#include "typedefs.h" -#endif - -/* enable structure packing */ -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#pragma pack(1) -#define PACKED -#endif - -/* - * The number of bytes in an ethernet (MAC) address. - */ -#define ETHER_ADDR_LEN 6 - -/* - * The number of bytes in the type field. - */ -#define ETHER_TYPE_LEN 2 - -/* - * The number of bytes in the trailing CRC field. - */ -#define ETHER_CRC_LEN 4 - -/* - * The length of the combined header. - */ -#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN) - -/* - * The minimum packet length. - */ -#define ETHER_MIN_LEN 64 - -/* - * The minimum packet user data length. - */ -#define ETHER_MIN_DATA 46 - -/* - * The maximum packet length. - */ -#define ETHER_MAX_LEN 1518 - -/* - * The maximum packet user data length. - */ -#define ETHER_MAX_DATA 1500 - -/* ether types */ -#define ETHER_TYPE_IP 0x0800 /* IP */ -#define ETHER_TYPE_ARP 0x0806 /* ARP */ -#define ETHER_TYPE_8021Q 0x8100 /* 802.1Q */ -#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */ -#define ETHER_TYPE_802_1X 0x888e /* 802.1x */ -#ifdef BCMWPA2 -#define ETHER_TYPE_802_1X_PREAUTH 0x88c7 /* 802.1x preauthentication */ -#endif - -/* Broadcom subtype follows ethertype; First 2 bytes are reserved; Next 2 are subtype; */ -#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4 byte subtype */ -#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */ - -/* ether header */ -#define ETHER_DEST_OFFSET 0 /* dest address offset */ -#define ETHER_SRC_OFFSET 6 /* src address offset */ -#define ETHER_TYPE_OFFSET 12 /* ether type offset */ - -/* - * A macro to validate a length with - */ -#define ETHER_IS_VALID_LEN(foo) \ - ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN) - - -#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */ -/* - * Structure of a 10Mb/s Ethernet header. - */ -struct ether_header { - uint8 ether_dhost[ETHER_ADDR_LEN]; - uint8 ether_shost[ETHER_ADDR_LEN]; - uint16 ether_type; -} PACKED; - -/* - * Structure of a 48-bit Ethernet address. - */ -struct ether_addr { - uint8 octet[ETHER_ADDR_LEN]; -} PACKED; -#endif /* !__INCif_etherh Quick and ugly hack for VxWorks */ - -/* - * Takes a pointer, sets locally admininistered - * address bit in the 48-bit Ethernet address. - */ -#define ETHER_SET_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] | 2)) - -/* - * Takes a pointer, returns true if a 48-bit multicast address - * (including broadcast, since it is all ones) - */ -#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1) - - -/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */ -#define ether_cmp(a, b) (!(((short*)a)[0] == ((short*)b)[0]) | \ - !(((short*)a)[1] == ((short*)b)[1]) | \ - !(((short*)a)[2] == ((short*)b)[2])) - -/* copy an ethernet address - assumes the pointers can be referenced as shorts */ -#define ether_copy(s, d) { \ - ((short*)d)[0] = ((short*)s)[0]; \ - ((short*)d)[1] = ((short*)s)[1]; \ - ((short*)d)[2] = ((short*)s)[2]; } - -/* - * Takes a pointer, returns true if a 48-bit broadcast (all ones) - */ -#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \ - ((uint8 *)(ea))[1] & \ - ((uint8 *)(ea))[2] & \ - ((uint8 *)(ea))[3] & \ - ((uint8 *)(ea))[4] & \ - ((uint8 *)(ea))[5]) == 0xff) - -static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}}; - -/* - * Takes a pointer, returns true if a 48-bit null address (all zeros) - */ -#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \ - ((uint8 *)(ea))[1] | \ - ((uint8 *)(ea))[2] | \ - ((uint8 *)(ea))[3] | \ - ((uint8 *)(ea))[4] | \ - ((uint8 *)(ea))[5]) == 0) - -#undef PACKED -#if !defined(__GNUC__) -#pragma pack() -#endif - -#endif /* __NET_ETHERNET_H */ diff --git a/package/broadcom-wl-old/src/include/proto/wpa.h b/package/broadcom-wl-old/src/include/proto/wpa.h deleted file mode 100644 index 26f258f1a8..0000000000 --- a/package/broadcom-wl-old/src/include/proto/wpa.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Fundamental types and constants relating to WPA - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - */ - -#ifndef _proto_wpa_h_ -#define _proto_wpa_h_ - -#include -#include - -/* enable structure packing */ -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#pragma pack(1) -#define PACKED -#endif - -/* Reason Codes */ - -/* 10 and 11 are from TGh. */ -#define DOT11_RC_BAD_PC 10 /* Unacceptable power capability element */ -#define DOT11_RC_BAD_CHANNELS 11 /* Unacceptable supported channels element */ -/* 12 is unused */ -/* 13 through 23 taken from P802.11i/D3.0, November 2002 */ -#define DOT11_RC_INVALID_WPA_IE 13 /* Invalid info. element */ -#define DOT11_RC_MIC_FAILURE 14 /* Michael failure */ -#define DOT11_RC_4WH_TIMEOUT 15 /* 4-way handshake timeout */ -#define DOT11_RC_GTK_UPDATE_TIMEOUT 16 /* Group key update timeout */ -#define DOT11_RC_WPA_IE_MISMATCH 17 /* WPA IE in 4-way handshake differs from - * (re-)assoc. request/probe response - */ -#define DOT11_RC_INVALID_MC_CIPHER 18 /* Invalid multicast cipher */ -#define DOT11_RC_INVALID_UC_CIPHER 19 /* Invalid unicast cipher */ -#define DOT11_RC_INVALID_AKMP 20 /* Invalid authenticated key management protocol */ -#define DOT11_RC_BAD_WPA_VERSION 21 /* Unsupported WPA version */ -#define DOT11_RC_INVALID_WPA_CAP 22 /* Invalid WPA IE capabilities */ -#define DOT11_RC_8021X_AUTH_FAIL 23 /* 802.1X authentication failure */ - -#define WPA2_PMKID_LEN 16 - -/* WPA IE fixed portion */ -typedef struct -{ - uint8 tag; /* TAG */ - uint8 length; /* TAG length */ - uint8 oui[3]; /* IE OUI */ - uint8 oui_type; /* OUI type */ - struct { - uint8 low; - uint8 high; - } PACKED version; /* IE version */ -} PACKED wpa_ie_fixed_t; -#define WPA_IE_OUITYPE_LEN 4 -#define WPA_IE_FIXED_LEN 8 -#define WPA_IE_TAG_FIXED_LEN 6 - -#ifdef BCMWPA2 -typedef struct { - uint8 tag; /* TAG */ - uint8 length; /* TAG length */ - struct { - uint8 low; - uint8 high; - } PACKED version; /* IE version */ -} PACKED wpa_rsn_ie_fixed_t; -#define WPA_RSN_IE_FIXED_LEN 4 -#define WPA_RSN_IE_TAG_FIXED_LEN 2 -typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN]; -#endif - -/* WPA suite/multicast suite */ -typedef struct -{ - uint8 oui[3]; - uint8 type; -} PACKED wpa_suite_t, wpa_suite_mcast_t; -#define WPA_SUITE_LEN 4 - -/* WPA unicast suite list/key management suite list */ -typedef struct -{ - struct { - uint8 low; - uint8 high; - } PACKED count; - wpa_suite_t list[1]; -} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t; -#define WPA_IE_SUITE_COUNT_LEN 2 -#ifdef BCMWPA2 -typedef struct -{ - struct { - uint8 low; - uint8 high; - } PACKED count; - wpa_pmkid_t list[1]; -} PACKED wpa_pmkid_list_t; -#endif - -/* WPA cipher suites */ -#define WPA_CIPHER_NONE 0 /* None */ -#define WPA_CIPHER_WEP_40 1 /* WEP (40-bit) */ -#define WPA_CIPHER_TKIP 2 /* TKIP: default for WPA */ -#define WPA_CIPHER_AES_OCB 3 /* AES (OCB) */ -#define WPA_CIPHER_AES_CCM 4 /* AES (CCM) */ -#define WPA_CIPHER_WEP_104 5 /* WEP (104-bit) */ - -#define IS_WPA_CIPHER(cipher) ((cipher) == WPA_CIPHER_NONE || \ - (cipher) == WPA_CIPHER_WEP_40 || \ - (cipher) == WPA_CIPHER_WEP_104 || \ - (cipher) == WPA_CIPHER_TKIP || \ - (cipher) == WPA_CIPHER_AES_OCB || \ - (cipher) == WPA_CIPHER_AES_CCM) - -/* WPA TKIP countermeasures parameters */ -#define WPA_TKIP_CM_DETECT 60 /* multiple MIC failure window (seconds) */ -#define WPA_TKIP_CM_BLOCK 60 /* countermeasures active window (seconds) */ - -/* WPA capabilities defined in 802.11i */ -#define WPA_CAP_4_REPLAY_CNTRS 2 -#define WPA_CAP_16_REPLAY_CNTRS 3 -#define WPA_CAP_REPLAY_CNTR_SHIFT 2 -#define WPA_CAP_REPLAY_CNTR_MASK 0x000c - -/* WPA Specific defines */ -#define WPA_CAP_LEN 2 /* Length of RSN capabilities in RSN IE (2 octets) */ - -#ifdef BCMWPA2 -#define WPA_CAP_WPA2_PREAUTH 1 -#endif /* BCMWPA2 */ - -#undef PACKED -#if !defined(__GNUC__) -#pragma pack() -#endif - -#endif /* _proto_wpa_h_ */ diff --git a/package/broadcom-wl-old/src/include/typedefs.h b/package/broadcom-wl-old/src/include/typedefs.h deleted file mode 100644 index 7ae2de5a4e..0000000000 --- a/package/broadcom-wl-old/src/include/typedefs.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - */ - -#ifndef _TYPEDEFS_H_ -#define _TYPEDEFS_H_ - -/* - * Inferred Typedefs - * - */ - -/* Infer the compile environment based on preprocessor symbols and pramas. - * Override type definitions as needed, and include configuration dependent - * header files to define types. - */ - -#ifdef __cplusplus - -#define TYPEDEF_BOOL -#ifndef FALSE -#define FALSE false -#endif -#ifndef TRUE -#define TRUE true -#endif - -#endif /* __cplusplus */ - -#if defined(_NEED_SIZE_T_) -typedef long unsigned int size_t; -#endif - -#define TYPEDEF_UINT -#define TYPEDEF_USHORT -#define TYPEDEF_ULONG - - -/* Do not support the (u)int64 types with strict ansi for GNU C */ -#if defined(__GNUC__) && defined(__STRICT_ANSI__) -#define TYPEDEF_INT64 -#define TYPEDEF_UINT64 -#endif - -/* pick up ushort & uint from standard types.h */ -#if defined(linux) && defined(__KERNEL__) -#include /* sys/types.h and linux/types.h are oil and water */ -#else -#include -#endif - -/* use the default typedefs in the next section of this file */ -#define USE_TYPEDEF_DEFAULTS - -/* - * Default Typedefs - * - */ - -#ifdef USE_TYPEDEF_DEFAULTS -#undef USE_TYPEDEF_DEFAULTS - -#ifndef TYPEDEF_BOOL -typedef /* @abstract@ */ unsigned char bool; -#endif - -/* define uchar, ushort, uint, ulong */ - -#ifndef TYPEDEF_UCHAR -typedef unsigned char uchar; -#endif - -#ifndef TYPEDEF_USHORT -typedef unsigned short ushort; -#endif - -#ifndef TYPEDEF_UINT -typedef unsigned int uint; -#endif - -#ifndef TYPEDEF_ULONG -typedef unsigned long ulong; -#endif - -/* define [u]int8/16/32/64, uintptr */ - -#ifndef TYPEDEF_UINT8 -typedef unsigned char uint8; -#endif - -#ifndef TYPEDEF_UINT16 -typedef unsigned short uint16; -#endif - -#ifndef TYPEDEF_UINT32 -typedef unsigned int uint32; -#endif - -#ifndef TYPEDEF_UINT64 -typedef unsigned long long uint64; -#endif - -#ifndef TYPEDEF_UINTPTR -typedef unsigned int uintptr; -#endif - -#ifndef TYPEDEF_INT8 -typedef signed char int8; -#endif - -#ifndef TYPEDEF_INT16 -typedef signed short int16; -#endif - -#ifndef TYPEDEF_INT32 -typedef signed int int32; -#endif - -#ifndef TYPEDEF_INT64 -typedef signed long long int64; -#endif - -/* define float32/64, float_t */ - -#ifndef TYPEDEF_FLOAT32 -typedef float float32; -#endif - -#ifndef TYPEDEF_FLOAT64 -typedef double float64; -#endif - -/* - * abstracted floating point type allows for compile time selection of - * single or double precision arithmetic. Compiling with -DFLOAT32 - * selects single precision; the default is double precision. - */ - -#ifndef TYPEDEF_FLOAT_T - -#if defined(FLOAT32) -typedef float32 float_t; -#else /* default to double precision floating point */ -typedef float64 float_t; -#endif - -#endif /* TYPEDEF_FLOAT_T */ - -/* define macro values */ - -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef TRUE -#define TRUE 1 /* TRUE */ -#endif - -#ifndef NULL -#define NULL 0 -#endif - -#ifndef OFF -#define OFF 0 -#endif - -#ifndef ON -#define ON 1 /* ON = 1 */ -#endif - -#define AUTO (-1) /* Auto = -1 */ - -/* define PTRSZ, INLINE */ - -#ifndef PTRSZ -#define PTRSZ sizeof(char*) -#endif - -#ifndef INLINE - -#ifdef _MSC_VER - -#define INLINE __inline - -#elif __GNUC__ - -#define INLINE __inline__ - -#else - -#define INLINE - -#endif /* _MSC_VER */ - -#endif /* INLINE */ - -#undef TYPEDEF_BOOL -#undef TYPEDEF_UCHAR -#undef TYPEDEF_USHORT -#undef TYPEDEF_UINT -#undef TYPEDEF_ULONG -#undef TYPEDEF_UINT8 -#undef TYPEDEF_UINT16 -#undef TYPEDEF_UINT32 -#undef TYPEDEF_UINT64 -#undef TYPEDEF_UINTPTR -#undef TYPEDEF_INT8 -#undef TYPEDEF_INT16 -#undef TYPEDEF_INT32 -#undef TYPEDEF_INT64 -#undef TYPEDEF_FLOAT32 -#undef TYPEDEF_FLOAT64 -#undef TYPEDEF_FLOAT_T - -#endif /* USE_TYPEDEF_DEFAULTS */ - -/* - * Including the bcmdefs.h here, to make sure everyone including typedefs.h - * gets this automatically -*/ -#include - -#endif /* _TYPEDEFS_H_ */ diff --git a/package/broadcom-wl-old/src/include/wlioctl.h b/package/broadcom-wl-old/src/include/wlioctl.h deleted file mode 100644 index 0c8896140e..0000000000 --- a/package/broadcom-wl-old/src/include/wlioctl.h +++ /dev/null @@ -1,1387 +0,0 @@ -/* - * Custom OID/ioctl definitions for - * Broadcom 802.11abg Networking Device Driver - * - * Definitions subject to change without notice. - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - */ - -#ifndef _wlioctl_h_ -#define _wlioctl_h_ - -#include -#include -#include -#include -#include - -#ifdef __NetBSD__ -/* NetBSD 2.0 does not have SIOCDEVPRIVATE. This is NetBSD 2.0 specific */ -#define SIOCDEVPRIVATE _IOWR('i', 139, struct ifreq) -#endif - -/* require default structure packing */ -#if !defined(__GNUC__) -#pragma pack(push, 8) -#endif - -/* A chanspec holds the channel number, band, bandwidth and control sideband */ -typedef uint16 chanspec_t; -#define WL_CHANSPEC_CHAN_MASK 0x00ff - -#define WL_CHANSPEC_CTL_SB_MASK 0x0300 -#define WL_CHANSPEC_CTL_SB_SHIFT 8 -#define WL_CHANSPEC_CTL_SB_LOWER 0x0100 -#define WL_CHANSPEC_CTL_SB_UPPER 0x0200 -#define WL_CHANSPEC_CTL_SB_NONE 0x0300 - -#define WL_CHANSPEC_BW_MASK 0x0C00 -#define WL_CHANSPEC_BW_SHIFT 10 -#define WL_CHANSPEC_BW_10 0x0400 -#define WL_CHANSPEC_BW_20 0x0800 -#define WL_CHANSPEC_BW_40 0x0C00 - -#define WL_CHANSPEC_BAND_MASK 0xf000 -#define WL_CHANSPEC_BAND_SHIFT 12 -#define WL_CHANSPEC_BAND_5G 0x1000 -#define WL_CHANSPEC_BAND_2G 0x2000 -#define INVCHANSPEC 255 - -/* Legacy structure to help keep backward compatible wl tool and tray app */ - -#define LEGACY_WL_BSS_INFO_VERSION 107 /* older version of wl_bss_info struct */ - -typedef struct wl_bss_info_107 { - uint32 version; /* version field */ - uint32 length; /* byte length of data in this record, - * starting at version and including IEs - */ - struct ether_addr BSSID; - uint16 beacon_period; /* units are Kusec */ - uint16 capability; /* Capability information */ - uint8 SSID_len; - uint8 SSID[32]; - struct { - uint count; /* # rates in this set */ - uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - uint8 channel; /* Channel no. */ - uint16 atim_window; /* units are Kusec */ - uint8 dtim_period; /* DTIM period */ - int16 RSSI; /* receive signal strength (in dBm) */ - int8 phy_noise; /* noise (in dBm) */ - uint32 ie_length; /* byte length of Information Elements */ - /* variable length Information Elements */ -} wl_bss_info_107_t; - -/* - * Per-bss information structure. - */ - -#define WL_BSS_INFO_VERSION 108 /* current version of wl_bss_info struct */ - -/* BSS info structure - * Applications MUST CHECK ie_offset field and length field to access IEs and - * next bss_info structure in a vector (in wl_scan_results_t) - */ -typedef struct wl_bss_info { - uint32 version; /* version field */ - uint32 length; /* byte length of data in this record, - * starting at version and including IEs - */ - struct ether_addr BSSID; - uint16 beacon_period; /* units are Kusec */ - uint16 capability; /* Capability information */ - uint8 SSID_len; - uint8 SSID[32]; - struct { - uint count; /* # rates in this set */ - uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - chanspec_t chanspec; /* chanspec for bss */ - uint16 atim_window; /* units are Kusec */ - uint8 dtim_period; /* DTIM period */ - int16 RSSI; /* receive signal strength (in dBm) */ - int8 phy_noise; /* noise (in dBm) */ - - bool n_cap; /* BSS is 802.11N Capable */ - uint32 nbss_cap; /* 802.11N BSS Capabilities (based on EWC_CAP_*) */ - uint8 ctl_ch; /* 802.11N BSS control channel number */ - uint32 reserved[2]; /* Reserved for expansion of BSS properties */ - uint8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ - - uint16 ie_offset; /* offset at which IEs start, from beginning */ - uint32 ie_length; /* byte length of Information Elements */ - /* Add new fields here */ - /* variable length Information Elements */ -} wl_bss_info_t; - -typedef struct wlc_ssid { - uint32 SSID_len; - uchar SSID[32]; -} wlc_ssid_t; - -typedef struct wl_scan_params { - wlc_ssid_t ssid; /* default: {0, ""} */ - struct ether_addr bssid; /* default: bcast */ - int8 bss_type; /* default: any, - * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT - */ - int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */ - int32 nprobes; /* -1 use default, number of probes per channel */ - int32 active_time; /* -1 use default, dwell time per channel for - * active scanning - */ - int32 passive_time; /* -1 use default, dwell time per channel - * for passive scanning - */ - int32 home_time; /* -1 use default, dwell time for the home channel - * between channel scans - */ - int32 channel_num; /* 0 use default (all available channels), count of - * channels in channel_list - */ - uint16 channel_list[1]; /* list of chanspecs */ -} wl_scan_params_t; -/* size of wl_scan_params not including variable length array */ -#define WL_SCAN_PARAMS_FIXED_SIZE 64 - -typedef struct wl_scan_results { - uint32 buflen; - uint32 version; - uint32 count; - wl_bss_info_t bss_info[1]; -} wl_scan_results_t; -/* size of wl_scan_results not including variable length array */ -#define WL_SCAN_RESULTS_FIXED_SIZE 12 - - -#define WL_NUMRATES 255 /* max # of rates in a rateset */ -typedef struct wl_rateset { - uint32 count; /* # rates in this set */ - uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -} wl_rateset_t; - -/* uint32 list */ -typedef struct wl_uint32_list { - /* in - # of elements, out - # of entries */ - uint32 count; - /* variable length uint32 list */ - uint32 element[1]; -} wl_uint32_list_t; - -#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */ - -/* defines used by the nrate iovar */ -#define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ -#define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ -#define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ -#define NRATE_STF_SHIFT 8 /* stf mode shift */ - -#define ANTENNA_NUM_1 1 /* total number of antennas to be used */ -#define ANTENNA_NUM_2 2 -#define ANTENNA_NUM_3 3 -#define ANTENNA_NUM_4 4 - -typedef struct wl_channels_in_country { - uint32 buflen; - uint32 band; - char country_abbrev[WLC_CNTRY_BUF_SZ]; - uint32 count; - uint32 channel[1]; -} wl_channels_in_country_t; - -typedef struct wl_country_list { - uint32 buflen; - uint32 band_set; - uint32 band; - uint32 count; - char country_abbrev[1]; -} wl_country_list_t; - -#define WL_RM_TYPE_BASIC 1 -#define WL_RM_TYPE_CCA 2 -#define WL_RM_TYPE_RPI 3 - -#define WL_RM_FLAG_PARALLEL (1<<0) - -#define WL_RM_FLAG_LATE (1<<1) -#define WL_RM_FLAG_INCAPABLE (1<<2) -#define WL_RM_FLAG_REFUSED (1<<3) - -typedef struct wl_rm_req_elt { - int8 type; - int8 flags; - chanspec_t chanspec; - uint32 token; /* token for this measurement */ - uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ - uint32 tsf_l; /* TSF low 32-bits */ - uint32 dur; /* TUs */ -} wl_rm_req_elt_t; - -typedef struct wl_rm_req { - uint32 token; /* overall measurement set token */ - uint32 count; /* number of measurement requests */ - wl_rm_req_elt_t req[1]; /* variable length block of requests */ -} wl_rm_req_t; -#define WL_RM_REQ_FIXED_LEN 8 - -typedef struct wl_rm_rep_elt { - int8 type; - int8 flags; - chanspec_t chanspec; - uint32 token; /* token for this measurement */ - uint32 tsf_h; /* TSF high 32-bits of Measurement start time */ - uint32 tsf_l; /* TSF low 32-bits */ - uint32 dur; /* TUs */ - uint32 len; /* byte length of data block */ - uint8 data[1]; /* variable length data block */ -} wl_rm_rep_elt_t; -#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ - -#define WL_RPI_REP_BIN_NUM 8 -typedef struct wl_rm_rpi_rep { - uint8 rpi[WL_RPI_REP_BIN_NUM]; - int8 rpi_max[WL_RPI_REP_BIN_NUM]; -} wl_rm_rpi_rep_t; - -typedef struct wl_rm_rep { - uint32 token; /* overall measurement set token */ - uint32 len; /* length of measurement report block */ - wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ -} wl_rm_rep_t; -#define WL_RM_REP_FIXED_LEN 8 - - -#if defined(BCMSUP_PSK) -typedef enum sup_auth_status { - WLC_SUP_DISCONNECTED = 0, - WLC_SUP_CONNECTING, - WLC_SUP_IDREQUIRED, - WLC_SUP_AUTHENTICATING, - WLC_SUP_AUTHENTICATED, - WLC_SUP_KEYXCHANGE, - WLC_SUP_KEYED, - WLC_SUP_TIMEOUT -} sup_auth_status_t; -#endif /* BCMCCX | BCMSUP_PSK */ - -/* Enumerate crypto algorithms */ -#define CRYPTO_ALGO_OFF 0 -#define CRYPTO_ALGO_WEP1 1 -#define CRYPTO_ALGO_TKIP 2 -#define CRYPTO_ALGO_WEP128 3 -#define CRYPTO_ALGO_AES_CCM 4 -#define CRYPTO_ALGO_AES_OCB_MSDU 5 -#define CRYPTO_ALGO_AES_OCB_MPDU 6 -#define CRYPTO_ALGO_NALG 7 - -#define WSEC_GEN_MIC_ERROR 0x0001 -#define WSEC_GEN_REPLAY 0x0002 - -#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ -#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ -#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ - -typedef struct wl_wsec_key { - uint32 index; /* key index */ - uint32 len; /* key length */ - uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */ - uint32 pad_1[18]; - uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - uint32 flags; /* misc flags */ - uint32 pad_2[2]; - int pad_3; - int iv_initialized; /* has IV been initialized already? */ - int pad_4; - /* Rx IV */ - struct { - uint32 hi; /* upper 32 bits of IV */ - uint16 lo; /* lower 16 bits of IV */ - } rxiv; - uint32 pad_5[2]; - struct ether_addr ea; /* per station */ -} wl_wsec_key_t; - -#define WSEC_MIN_PSK_LEN 8 -#define WSEC_MAX_PSK_LEN 64 - -/* Flag for key material needing passhash'ing */ -#define WSEC_PASSPHRASE (1<<0) - -/* receptacle for WLC_SET_WSEC_PMK parameter */ -typedef struct { - ushort key_len; /* octets in key material */ - ushort flags; /* key handling qualification */ - uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ -} wsec_pmk_t; - -/* wireless security bitvec */ -#define WEP_ENABLED 0x0001 -#define TKIP_ENABLED 0x0002 -#define AES_ENABLED 0x0004 -#define WSEC_SWFLAG 0x0008 -#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ -#define FIPS_ENABLED 0x0080 - -/* WPA authentication mode bitvec */ -#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ -#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ -#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ -#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ -/* #define WPA_AUTH_8021X 0x0020 */ /* 802.1x, reserved */ -#ifdef BCMWPA2 -#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ -#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ -#endif /* BCMWPA2 */ - -#ifdef BCMWPA2 -/* pmkid */ -#define MAXPMKID 16 - -typedef struct _pmkid -{ - struct ether_addr BSSID; - uint8 PMKID[WPA2_PMKID_LEN]; -} pmkid_t; - -typedef struct _pmkid_list -{ - uint32 npmkid; - pmkid_t pmkid[1]; -} pmkid_list_t; - -typedef struct _pmkid_cand { - struct ether_addr BSSID; - uint8 preauth; -} pmkid_cand_t; - -typedef struct _pmkid_cand_list { - uint32 npmkid_cand; - pmkid_cand_t pmkid_cand[1]; -} pmkid_cand_list_t; -#endif /* BCMWPA2 */ - -typedef struct wl_led_info { - uint32 index; /* led index */ - uint32 behavior; - bool activehi; -} wl_led_info_t; - -typedef struct wlc_assoc_info { - uint32 req_len; - uint32 resp_len; - uint32 flags; - struct dot11_assoc_req req; - struct ether_addr reassoc_bssid; /* used in reassoc's */ - struct dot11_assoc_resp resp; -} wl_assoc_info_t; -/* flags */ -#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */ -/* srom read/write struct passed through ioctl */ -typedef struct { - uint byteoff; /* byte offset */ - uint nbytes; /* number of bytes */ - uint16 buf[1]; -} srom_rw_t; - -/* R_REG and W_REG struct passed through ioctl */ -typedef struct { - uint32 byteoff; /* byte offset of the field in d11regs_t */ - uint32 val; /* read/write value of the field */ - uint32 size; /* sizeof the field */ - uint band; /* band (optional) */ -} rw_reg_t; - -/* Structure used by GET/SET_ATTEN ioctls - it controls power in b/g-band */ -/* PCL - Power Control Loop */ -/* current gain setting is replaced by user input */ -#define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */ -#define WL_ATTEN_PCL_ON 1 /* turn on PCL */ -/* current gain setting is maintained */ -#define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */ -typedef struct { - uint16 auto_ctrl; /* WL_ATTEN_XX */ - uint16 bb; /* Baseband attenuation */ - uint16 radio; /* Radio attenuation */ - uint16 txctl1; /* Radio TX_CTL1 value */ -} atten_t; - -/* defines used by poweridx iovar - it controls power in a-band */ -/* current gain setting is maintained */ -#define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */ -#define WL_PWRIDX_PCL_ON -1 /* turn on PCL */ -#define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */ -#define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */ -/* value >= 0 causes - * - input to be set to that value - * - PCL to be off - */ - -/* Used to get specific STA parameters */ -typedef struct { - uint32 val; - struct ether_addr ea; -} scb_val_t; - - -/* Event data type */ -typedef struct wlc_event { - wl_event_msg_t event; /* encapsulated event */ - struct ether_addr *addr; /* used to keep a trace of the potential present of - * an address in wlc_event_msg_t - */ - void *data; /* used to hang additional data on an event */ - struct wlc_event *next; /* enables ordered list of pending events */ -} wlc_event_t; - -#define BCM_MAC_STATUS_INDICATION (0x40010200L) - -/* Please update the following when modifying this structure: - * StaInfo Twiki page flags section - description of the sta_info_t struct - * src/wl/exe/wlu.c - print of sta_info_t - * Pay attention to version if structure changes. - */ -typedef struct { - uint16 ver; /* version of this struct */ - uint16 len; /* length in bytes of this structure */ - uint16 cap; /* sta's advertised capabilities */ - uint32 flags; /* flags defined below */ - uint32 idle; /* time since data pkt rx'd from sta */ - struct ether_addr ea; /* Station address */ - wl_rateset_t rateset; /* rateset in use */ - uint32 in; /* seconds elapsed since associated */ - uint32 listen_interval_inms; /* Min Listen interval in ms for this STA */ -} sta_info_t; - -#define WL_STA_VER 2 - -/* Flags for sta_info_t indicating properties of STA */ -#define WL_STA_BRCM 0x1 /* Running a Broadcom driver */ -#define WL_STA_WME 0x2 /* WMM association */ -#define WL_STA_ABCAP 0x4 /* Afterburner-capable */ -#define WL_STA_AUTHE 0x8 /* Authenticated */ -#define WL_STA_ASSOC 0x10 /* Associated */ -#define WL_STA_AUTHO 0x20 /* Authorized */ -#define WL_STA_WDS 0x40 /* Wireless Distribution System */ -#define WL_STA_WDS_LINKUP 0x80 /* WDS traffic/probes flowing properly */ -#define WL_STA_PS 0x100 /* STA is in power save mode from AP's viewpoint */ -#define WL_STA_APSD_BE 0x200 /* APSD delv/trigger for AC_BE is default enabled */ -#define WL_STA_APSD_BK 0x400 /* APSD delv/trigger for AC_BK is default enabled */ -#define WL_STA_APSD_VI 0x800 /* APSD delv/trigger for AC_VI is default enabled */ -#define WL_STA_APSD_VO 0x1000 /* APSD delv/trigger for AC_VO is default enabled */ -#define WL_STA_N_CAP 0x2000 /* STA 802.11n capable */ - -#define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */ - -/* - * Country locale determines which channels are available to us. - */ -typedef enum _wlc_locale { - WLC_WW = 0, /* Worldwide */ - WLC_THA, /* Thailand */ - WLC_ISR, /* Israel */ - WLC_JDN, /* Jordan */ - WLC_PRC, /* China */ - WLC_JPN, /* Japan */ - WLC_FCC, /* USA */ - WLC_EUR, /* Europe */ - WLC_USL, /* US Low Band only */ - WLC_JPH, /* Japan High Band only */ - WLC_ALL, /* All the channels in this band */ - WLC_11D, /* Represents locale received by 11d beacons */ - WLC_LAST_LOCALE, - WLC_UNDEFINED_LOCALE = 0xf -} wlc_locale_t; - -/* channel encoding */ -typedef struct channel_info { - int hw_channel; - int target_channel; - int scan_channel; -} channel_info_t; - -/* For ioctls that take a list of MAC addresses */ -struct maclist { - uint count; /* number of MAC addresses */ - struct ether_addr ea[1]; /* variable length array of MAC addresses */ -}; - -/* get pkt count struct passed through ioctl */ -typedef struct get_pktcnt { - uint rx_good_pkt; - uint rx_bad_pkt; - uint tx_good_pkt; - uint tx_bad_pkt; -} get_pktcnt_t; - -/* Linux network driver ioctl encoding */ -typedef struct wl_ioctl { - uint cmd; /* common ioctl definition */ - void *buf; /* pointer to user buffer */ - uint len; /* length of user buffer */ - bool set; /* get or set request (optional) */ - uint used; /* bytes read or written (optional) */ - uint needed; /* bytes needed (optional) */ -} wl_ioctl_t; - -/* - * Structure for passing hardware and software - * revision info up from the driver. - */ -typedef struct wlc_rev_info { - uint vendorid; /* PCI vendor id */ - uint deviceid; /* device id of chip */ - uint radiorev; /* radio revision */ - uint chiprev; /* chip revision */ - uint corerev; /* core revision */ - uint boardid; /* board identifier (usu. PCI sub-device id) */ - uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ - uint boardrev; /* board revision */ - uint driverrev; /* driver version */ - uint ucoderev; /* microcode version */ - uint bus; /* bus type */ - uint chipnum; /* chip number */ -} wlc_rev_info_t; - -#define WL_BRAND_MAX 10 -typedef struct wl_instance_info { - uint instance; - char brand[WL_BRAND_MAX]; -} wl_instance_info_t; - -/* check this magic number */ -#define WLC_IOCTL_MAGIC 0x14e46c77 - -/* bump this number if you change the ioctl interface */ -#define WLC_IOCTL_VERSION 1 - -#define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ -#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ - -/* common ioctl definitions */ -#define WLC_GET_MAGIC 0 -#define WLC_GET_VERSION 1 -#define WLC_UP 2 -#define WLC_DOWN 3 -#define WLC_DUMP 6 -#define WLC_GET_MSGLEVEL 7 -#define WLC_SET_MSGLEVEL 8 -#define WLC_GET_PROMISC 9 -#define WLC_SET_PROMISC 10 -#define WLC_GET_RATE 12 -/* #define WLC_SET_RATE 13 */ /* no longer supported */ -#define WLC_GET_INSTANCE 14 -/* #define WLC_GET_FRAG 15 */ /* no longer supported */ -/* #define WLC_SET_FRAG 16 */ /* no longer supported */ -/* #define WLC_GET_RTS 17 */ /* no longer supported */ -/* #define WLC_SET_RTS 18 */ /* no longer supported */ -#define WLC_GET_INFRA 19 -#define WLC_SET_INFRA 20 -#define WLC_GET_AUTH 21 -#define WLC_SET_AUTH 22 -#define WLC_GET_BSSID 23 -#define WLC_SET_BSSID 24 -#define WLC_GET_SSID 25 -#define WLC_SET_SSID 26 -#define WLC_RESTART 27 -#define WLC_GET_CHANNEL 29 -#define WLC_SET_CHANNEL 30 -#define WLC_GET_SRL 31 -#define WLC_SET_SRL 32 -#define WLC_GET_LRL 33 -#define WLC_SET_LRL 34 -#define WLC_GET_PLCPHDR 35 -#define WLC_SET_PLCPHDR 36 -#define WLC_GET_RADIO 37 -#define WLC_SET_RADIO 38 -#define WLC_GET_PHYTYPE 39 -/* #define WLC_GET_WEP 42 */ /* no longer supported */ -/* #define WLC_SET_WEP 43 */ /* no longer supported */ -#define WLC_GET_KEY 44 -#define WLC_SET_KEY 45 -#define WLC_GET_REGULATORY 46 -#define WLC_SET_REGULATORY 47 -#define WLC_GET_PASSIVE 48 -#define WLC_SET_PASSIVE 49 -#define WLC_SCAN 50 -#define WLC_SCAN_RESULTS 51 -#define WLC_DISASSOC 52 -#define WLC_REASSOC 53 -#define WLC_GET_ROAM_TRIGGER 54 -#define WLC_SET_ROAM_TRIGGER 55 -#define WLC_GET_TXANT 61 -#define WLC_SET_TXANT 62 -#define WLC_GET_ANTDIV 63 -#define WLC_SET_ANTDIV 64 -/* #define WLC_GET_TXPWR 65 */ /* no longer supported */ -/* #define WLC_SET_TXPWR 66 */ /* no longer supported */ -#define WLC_GET_CLOSED 67 -#define WLC_SET_CLOSED 68 -#define WLC_GET_MACLIST 69 -#define WLC_SET_MACLIST 70 -#define WLC_GET_RATESET 71 -#define WLC_SET_RATESET 72 -#define WLC_GET_LOCALE 73 -#define WLC_LONGTRAIN 74 -#define WLC_GET_BCNPRD 75 -#define WLC_SET_BCNPRD 76 -#define WLC_GET_DTIMPRD 77 -#define WLC_SET_DTIMPRD 78 -#define WLC_GET_SROM 79 -#define WLC_SET_SROM 80 -#define WLC_GET_WEP_RESTRICT 81 -#define WLC_SET_WEP_RESTRICT 82 -#define WLC_GET_COUNTRY 83 -#define WLC_SET_COUNTRY 84 -#define WLC_GET_PM 85 -#define WLC_SET_PM 86 -#define WLC_GET_WAKE 87 -#define WLC_SET_WAKE 88 -#define WLC_GET_D11CNTS 89 -#define WLC_GET_FORCELINK 90 /* ndis only */ -#define WLC_SET_FORCELINK 91 /* ndis only */ -#define WLC_FREQ_ACCURACY 92 -#define WLC_CARRIER_SUPPRESS 93 -#define WLC_GET_PHYREG 94 -#define WLC_SET_PHYREG 95 -#define WLC_GET_RADIOREG 96 -#define WLC_SET_RADIOREG 97 -#define WLC_GET_REVINFO 98 -#define WLC_GET_UCANTDIV 99 -#define WLC_SET_UCANTDIV 100 -#define WLC_R_REG 101 -#define WLC_W_REG 102 -#define WLC_DIAG_LOOPBACK 103 -#define WLC_RESET_D11CNTS 104 -#define WLC_GET_MACMODE 105 -#define WLC_SET_MACMODE 106 -#define WLC_GET_MONITOR 107 -#define WLC_SET_MONITOR 108 -#define WLC_GET_GMODE 109 -#define WLC_SET_GMODE 110 -#define WLC_GET_LEGACY_ERP 111 -#define WLC_SET_LEGACY_ERP 112 -#define WLC_GET_RX_ANT 113 -#define WLC_GET_CURR_RATESET 114 /* current rateset */ -#define WLC_GET_SCANSUPPRESS 115 -#define WLC_SET_SCANSUPPRESS 116 -#define WLC_GET_AP 117 -#define WLC_SET_AP 118 -#define WLC_GET_EAP_RESTRICT 119 -#define WLC_SET_EAP_RESTRICT 120 -#define WLC_SCB_AUTHORIZE 121 -#define WLC_SCB_DEAUTHORIZE 122 -#define WLC_GET_WDSLIST 123 -#define WLC_SET_WDSLIST 124 -#define WLC_GET_ATIM 125 -#define WLC_SET_ATIM 126 -#define WLC_GET_RSSI 127 -#define WLC_GET_PHYANTDIV 128 -#define WLC_SET_PHYANTDIV 129 -#define WLC_AP_RX_ONLY 130 -#define WLC_GET_TX_PATH_PWR 131 -#define WLC_SET_TX_PATH_PWR 132 -#define WLC_GET_WSEC 133 -#define WLC_SET_WSEC 134 -#define WLC_GET_PHY_NOISE 135 -#define WLC_GET_BSS_INFO 136 -#define WLC_GET_PKTCNTS 137 -#define WLC_GET_LAZYWDS 138 -#define WLC_SET_LAZYWDS 139 -#define WLC_GET_BANDLIST 140 -#define WLC_GET_BAND 141 -#define WLC_SET_BAND 142 -#define WLC_SCB_DEAUTHENTICATE 143 -#define WLC_GET_SHORTSLOT 144 -#define WLC_GET_SHORTSLOT_OVERRIDE 145 -#define WLC_SET_SHORTSLOT_OVERRIDE 146 -#define WLC_GET_SHORTSLOT_RESTRICT 147 -#define WLC_SET_SHORTSLOT_RESTRICT 148 -#define WLC_GET_GMODE_PROTECTION 149 -#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -#define WLC_UPGRADE 152 -/* #define WLC_GET_MRATE 153 */ /* no longer supported */ -/* #define WLC_SET_MRATE 154 */ /* no longer supported */ -#define WLC_GET_ASSOCLIST 159 -#define WLC_GET_CLK 160 -#define WLC_SET_CLK 161 -#define WLC_GET_UP 162 -#define WLC_OUT 163 -#define WLC_GET_WPA_AUTH 164 -#define WLC_SET_WPA_AUTH 165 -#define WLC_GET_PROTECTION_CONTROL 178 -#define WLC_SET_PROTECTION_CONTROL 179 -#define WLC_GET_PHYLIST 180 -#define WLC_GET_KEY_SEQ 183 -/* #define WLC_GET_GMODE_PROTECTION_CTS 198 */ /* no longer supported */ -/* #define WLC_SET_GMODE_PROTECTION_CTS 199 */ /* no longer supported */ -#define WLC_GET_PIOMODE 203 -#define WLC_SET_PIOMODE 204 -#define WLC_SET_LED 209 -#define WLC_GET_LED 210 -#define WLC_GET_CHANNEL_SEL 215 -#define WLC_START_CHANNEL_SEL 216 -#define WLC_GET_VALID_CHANNELS 217 -#define WLC_GET_FAKEFRAG 218 -#define WLC_SET_FAKEFRAG 219 -#define WLC_GET_WET 230 -#define WLC_SET_WET 231 -#define WLC_GET_KEY_PRIMARY 235 -#define WLC_SET_KEY_PRIMARY 236 -#define WLC_GET_RADAR 242 -#define WLC_SET_RADAR 243 -#define WLC_SET_SPECT_MANAGMENT 244 -#define WLC_GET_SPECT_MANAGMENT 245 -#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */ -#define WLC_SET_CS_SCAN_TIMER 248 -#define WLC_GET_CS_SCAN_TIMER 249 -#define WLC_SEND_PWR_CONSTRAINT 254 -#define WLC_CURRENT_PWR 256 -#define WLC_GET_CHANNELS_IN_COUNTRY 260 -#define WLC_GET_COUNTRY_LIST 261 -#define WLC_GET_VAR 262 /* get value of named variable */ -#define WLC_SET_VAR 263 /* set named variable to value */ -#define WLC_NVRAM_GET 264 /* deprecated */ -#define WLC_NVRAM_SET 265 -#define WLC_SET_WSEC_PMK 268 -#define WLC_GET_AUTH_MODE 269 -#define WLC_SET_AUTH_MODE 270 -#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ -#define WLC_NVOTPW 274 -#define WLC_OTPW 275 -#define WLC_SET_LOCALE 278 -#define WLC_GET_ALLOW_MODE 279 -#define WLC_SET_ALLOW_MODE 280 -#define WLC_GET_DESIRED_BSSID 281 -#define WLC_SET_DESIRED_BSSID 282 -#define WLC_LAST 283 /* do not change - use get_var/set_var */ - -/* - * Minor kludge alert: - * Duplicate a few definitions that irelay requires from epiioctl.h here - * so caller doesn't have to include this file and epiioctl.h . - * If this grows any more, it would be time to move these irelay-specific - * definitions out of the epiioctl.h and into a separate driver common file. - */ -#ifndef EPICTRL_COOKIE -#define EPICTRL_COOKIE 0xABADCEDE -#endif - -/* vx wlc ioctl's offset */ -#define CMN_IOCTL_OFF 0x180 - -/* - * custom OID support - * - * 0xFF - implementation specific OID - * 0xE4 - first byte of Broadcom PCI vendor ID - * 0x14 - second byte of Broadcom PCI vendor ID - * 0xXX - the custom OID number - */ - -/* begin 0x1f values beyond the start of the ET driver range. */ -#define WL_OID_BASE 0xFFE41420 - -/* NDIS overrides */ -#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE) -#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM) - -#define WL_DECRYPT_STATUS_SUCCESS 1 -#define WL_DECRYPT_STATUS_FAILURE 2 -#define WL_DECRYPT_STATUS_UNKNOWN 3 - -/* allows user-mode app to poll the status of USB image upgrade */ -#define WLC_UPGRADE_SUCCESS 0 -#define WLC_UPGRADE_PENDING 1 - -#ifdef CONFIG_USBRNDIS_RETAIL -/* struct passed in for WLC_NDCONFIG_ITEM */ -typedef struct { - char *name; - void *param; -} ndconfig_item_t; -#endif - -/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -#define WL_RADIO_SW_DISABLE (1<<0) -#define WL_RADIO_HW_DISABLE (1<<1) -#define WL_RADIO_MPC_DISABLE (1<<2) -#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ - -/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -#define WL_TXPWR_OVERRIDE (1<<31) - -/* "diag" iovar argument and error code */ -#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ -#define WL_DIAG_MEMORY 3 /* d11 memory test */ -#define WL_DIAG_LED 4 /* LED test */ -#define WL_DIAG_REG 5 /* d11/phy register test */ -#define WL_DIAG_SROM 6 /* srom read/crc test */ -#define WL_DIAG_DMA 7 /* DMA test */ - -#define WL_DIAGERR_SUCCESS 0 -#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ -#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ -#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ -#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ -#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ -#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ -#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ -#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ -#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ -#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ - -/* band types */ -#define WLC_BAND_AUTO 0 /* auto-select */ -#define WLC_BAND_5G 1 /* 5 Ghz */ -#define WLC_BAND_2G 2 /* 2.4 Ghz */ -#define WLC_BAND_ALL 3 /* all bands */ - -/* phy types (returned by WLC_GET_PHYTPE) */ -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_NULL 0xf - -/* MAC list modes */ -#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ - -/* - * - */ -#define GMODE_LEGACY_B 0 -#define GMODE_AUTO 1 -#define GMODE_ONLY 2 -#define GMODE_B_DEFERRED 3 -#define GMODE_PERFORMANCE 4 -#define GMODE_LRS 5 -#define GMODE_MAX 6 - -/* values for PLCPHdr_override */ -#define WLC_PLCP_AUTO -1 -#define WLC_PLCP_SHORT 0 -#define WLC_PLCP_LONG 1 - -/* values for g_protection_override and n_protection_override */ -#define WLC_PROTECTION_AUTO -1 -#define WLC_PROTECTION_OFF 0 -#define WLC_PROTECTION_ON 1 - -/* values for g_protection_control and n_protection_control */ -#define WLC_PROTECTION_CTL_OFF 0 -#define WLC_PROTECTION_CTL_LOCAL 1 -#define WLC_PROTECTION_CTL_OVERLAP 2 - -/* deprecated const names for g_protection_override */ -#define WLC_G_PROTECTION_AUTO WLC_PROTECTION_AUTO -#define WLC_G_PROTECTION_OFF WLC_PROTECTION_OFF -#define WLC_G_PROTECTION_ON WLC_PROTECTION_ON - -/* deprecated const names for g_protection_control */ -#define WLC_G_PROTECTION_CTL_OFF WLC_PROTECTION_CTL_OFF -#define WLC_G_PROTECTION_CTL_LOCAL WLC_PROTECTION_CTL_LOCAL -#define WLC_G_PROTECTION_CTL_OVERLAP WLC_PROTECTION_CTL_OVERLAP - -/* deprecated const names for get/set g_protection_control */ -#define WLC_GET_GMODE_PROTECTION_CONTROL WLC_GET_PROTECTION_CONTROL -#define WLC_SET_GMODE_PROTECTION_CONTROL WLC_SET_PROTECTION_CONTROL - -/* values for n_protection */ -#define WLC_N_PROTECTION_OFF 0 -#define WLC_N_PROTECTION_MIXEDMODE 1 -#define WLC_N_PROTECTION_CTS 2 - -/* values for n_preamble_type */ -#define WLC_N_PREAMBLE_MIXEDMODE 0 -#define WLC_N_PREAMBLE_GF 1 - -/* Values for PM */ -#define PM_OFF 0 -#define PM_MAX 1 -#define PM_FAST 2 - - - -typedef struct { - int npulses; /* required number of pulses at n * t_int */ - int ncontig; /* required number of pulses at t_int */ - int min_pw; /* minimum pulse width (20 MHz clocks) */ - int max_pw; /* maximum pulse width (20 MHz clocks) */ - uint16 thresh0; /* Radar detection, thresh 0 */ - uint16 thresh1; /* Radar detection, thresh 1 */ - int npulses_lp; /* Radar detection, minimum long pulses */ - int min_pw_lp; /* Minimum pulsewidth for long pulses */ - int max_pw_lp; /* Maximum pulsewidth for long pulses */ - int min_fm_lp; /* Minimum fm for long pulses */ - int max_deltat_lp; /* Maximum deltat for long pulses */ - int min_deltat; /* Minimum spacing between pulses */ -} wl_radar_args_t; - -/* radar iovar SET defines */ -#define WL_RADAR_DETECTOR_OFF 0 /* radar detector off */ -#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */ -#define WL_RADAR_SIMULATED 2 /* force radar detector to declare - * detection once - */ - -/* dfs_status iovar-related defines */ - -/* cac - channel availability check, - * ism - in-service monitoring - * csa - channel switching announcement - */ - -/* cac state values */ -#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */ -#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */ -#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */ -#define WL_DFS_CACSTATE_CSA 3 /* csa */ -#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */ -#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */ -#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */ -#define WL_DFS_CACSTATES 7 /* this many states exist */ - -/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */ -typedef struct { - uint state; /* noted by WL_DFS_CACSTATE_XX. */ - uint duration; /* time spent in ms in state. */ - /* as dfs enters ISM state, it removes the operational channel from quiet channel - * list and notes the channel in channel_cleared. set to 0 if no channel is cleared - */ - chanspec_t chanspec_cleared; - /* chanspec cleared used to be a uint, add another to uint16 to maintain size */ - uint16 pad; -} wl_dfs_status_t; - -#define NUM_PWRCTRL_RATES 12 - -typedef struct tx_inst_power { -} tx_inst_power_t; - - -/* regulatory enforcement levels */ -#define SPECT_MNGMT_OFF 0 /* both 11h and 11d disabled */ -#define SPECT_MNGMT_LOOSE_11H 1 /* allow non-11h APs in scan lists */ -#define SPECT_MNGMT_STRICT_11H 2 /* prune out non-11h APs from scan list */ -#define SPECT_MNGMT_STRICT_11D 3 /* switch to 802.11D mode */ -/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE - * adoption is done irregardless of capability-spectrum_management - */ -#define SPECT_MNGMT_LOOSE_11H_D 4 /* operation defined above */ - -#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */ -#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */ -#define WL_CHAN_BAND_5G (1 << 2) /* 5GHz-band channel */ -#define WL_CHAN_RADAR (1 << 3) /* radar sensitive channel */ -#define WL_CHAN_INACTIVE (1 << 4) /* temporarily inactive due to radar */ -#define WL_CHAN_PASSIVE (1 << 5) /* channel is in passive mode */ -#define WL_CHAN_RESTRICTED (1 << 6) /* restricted use channel */ - -/* BTC mode used by "btc_mode" iovar */ -#define WL_BTC_DISABLE 0 /* disable BT coexistance */ -#define WL_BTC_ENABLE 1 /* enable BT coexistance */ -#define WL_BTC_PREMPT 2 /* enable BT coexistance and BT pre-emption */ - -#define WL_MPC_VAL 0x00400000 -#define WL_APSTA_VAL 0x00800000 -#define WL_DFS_VAL 0x01000000 -#define WL_BA_VAL 0x02000000 -#define WL_NITRO_VAL 0x04000000 -#define WL_CAC_VAL 0x08000000 -#define WL_AMSDU_VAL 0x10000000 -#define WL_AMPDU_VAL 0x20000000 - -/* max # of leds supported by GPIO (gpio pin# == led index#) */ -#define WL_LED_NUMGPIO 16 /* gpio 0-15 */ - -/* led per-pin behaviors */ -#define WL_LED_OFF 0 /* always off */ -#define WL_LED_ON 1 /* always on */ -#define WL_LED_ACTIVITY 2 /* activity */ -#define WL_LED_RADIO 3 /* radio enabled */ -#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */ -#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */ -#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */ -#define WL_LED_WI1 7 -#define WL_LED_WI2 8 -#define WL_LED_WI3 9 -#define WL_LED_ASSOC 10 /* associated state indicator */ -#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */ -#define WL_LED_NUMBEHAVIOR 12 - -/* led behavior numeric value format */ -#define WL_LED_BEH_MASK 0x7f /* behavior mask */ -#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */ - -/* max # of channels returnd by the get valid channels iovar */ -#define WL_NUMCHANSPECS 100 - -/* WDS link local endpoint WPA role */ -#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */ -#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */ -#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */ - -/* number of bytes needed to define a 128-bit mask for MAC event reporting */ -#define WL_EVENTING_MASK_LEN 16 - -/* Structures and constants used for "vndr_ie" IOVar interface */ -#define VNDR_IE_CMD_LEN 4 /* length of the set command string: - * "add", "del" (+ NULL) - */ - -/* 802.11 Mgmt Packet flags */ -#define VNDR_IE_BEACON_FLAG 0x1 -#define VNDR_IE_PRBRSP_FLAG 0x2 -#define VNDR_IE_ASSOCRSP_FLAG 0x4 -#define VNDR_IE_AUTHRSP_FLAG 0x8 - -#define VNDR_IE_INFO_HDR_LEN (sizeof(uint32)) - -typedef struct { - uint32 pktflag; /* bitmask indicating which packet(s) contain this IE */ - vndr_ie_t vndr_ie_data; /* vendor IE data */ -} vndr_ie_info_t; - -typedef struct { - int iecount; /* number of entries in the vndr_ie_list[] array */ - vndr_ie_info_t vndr_ie_list[1]; /* variable size list of vndr_ie_info_t structs */ -} vndr_ie_buf_t; - -typedef struct { - char cmd[VNDR_IE_CMD_LEN]; /* vndr_ie IOVar set command : "add", "del" + NULL */ - vndr_ie_buf_t vndr_ie_buffer; /* buffer containing Vendor IE list information */ -} vndr_ie_setbuf_t; - -/* join target preference types */ -#define WL_JOIN_PREF_RSSI 1 /* by RSSI, mandatory */ -#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers, optional, RSN and WPA as values */ -#define WL_JOIN_PREF_BAND 3 /* by 802.11 band, optional, WLC_BAND_XXXX as values */ - -/* band preference */ -#define WLJP_BAND_ASSOC_PREF 255 /* use assoc preference settings */ - /* others use WLC_BAND_XXXX as values */ - -/* any multicast cipher suite */ -#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00" - -struct tsinfo_arg { - uint8 octets[3]; -}; - -#if !defined(__GNUC__) -#pragma pack(pop) -#endif - -#define NFIFO 6 /* # tx/rx fifopairs */ - -#define WL_CNT_T_VERSION 1 /* current version of wl_cnt_t struct */ - -typedef struct { - uint16 version; /* see definition of WL_CNT_T_VERSION */ - uint16 length; /* length of entire structure */ - - /* transmit stat counters */ - uint32 txframe; /* tx data frames */ - uint32 txbyte; /* tx data bytes */ - uint32 txretrans; /* tx mac retransmits */ - uint32 txerror; /* tx data errors (derived: sum of others) */ - uint32 txctl; /* tx management frames */ - uint32 txprshort; /* tx short preamble frames */ - uint32 txserr; /* tx status errors */ - uint32 txnobuf; /* tx out of buffers errors */ - uint32 txnoassoc; /* tx discard because we're not associated */ - uint32 txrunt; /* tx runt frames */ - uint32 txchit; /* tx header cache hit (fastpath) */ - uint32 txcmiss; /* tx header cache miss (slowpath) */ - - /* transmit chip error counters */ - uint32 txuflo; /* tx fifo underflows */ - uint32 txphyerr; /* tx phy errors (indicated in tx status) */ - uint32 txphycrs; - - /* receive stat counters */ - uint32 rxframe; /* rx data frames */ - uint32 rxbyte; /* rx data bytes */ - uint32 rxerror; /* rx data errors (derived: sum of others) */ - uint32 rxctl; /* rx management frames */ - uint32 rxnobuf; /* rx out of buffers errors */ - uint32 rxnondata; /* rx non data frames in the data channel errors */ - uint32 rxbadds; /* rx bad DS errors */ - uint32 rxbadcm; /* rx bad control or management frames */ - uint32 rxfragerr; /* rx fragmentation errors */ - uint32 rxrunt; /* rx runt frames */ - uint32 rxgiant; /* rx giant frames */ - uint32 rxnoscb; /* rx no scb error */ - uint32 rxbadproto; /* rx invalid frames */ - uint32 rxbadsrcmac; /* rx frames with Invalid Src Mac */ - uint32 rxbadda; /* rx frames tossed for invalid da */ - uint32 rxfilter; /* rx frames filtered out */ - - /* receive chip error counters */ - uint32 rxoflo; /* rx fifo overflow errors */ - uint32 rxuflo[NFIFO]; /* rx dma descriptor underflow errors */ - - uint32 d11cnt_txrts_off; /* d11cnt txrts value when reset d11cnt */ - uint32 d11cnt_rxcrc_off; /* d11cnt rxcrc value when reset d11cnt */ - uint32 d11cnt_txnocts_off; /* d11cnt txnocts value when reset d11cnt */ - - /* misc counters */ - uint32 dmade; /* tx/rx dma descriptor errors */ - uint32 dmada; /* tx/rx dma data errors */ - uint32 dmape; /* tx/rx dma descriptor protocol errors */ - uint32 reset; /* reset count */ - uint32 tbtt; /* cnts the TBTT int's */ - uint32 txdmawar; - uint32 pkt_callback_reg_fail; /* callbacks register failure */ - - /* MAC counters: 32-bit version of d11.h's macstat_t */ - uint32 txallfrm; /* total number of frames sent, incl. Data, ACK, RTS, CTS, - * Control Management (includes retransmissions) - */ - uint32 txrtsfrm; /* number of RTS sent out by the MAC */ - uint32 txctsfrm; /* number of CTS sent out by the MAC */ - uint32 txackfrm; /* number of ACK frames sent out */ - uint32 txdnlfrm; /* Not used */ - uint32 txbcnfrm; /* beacons transmitted */ - uint32 txfunfl[8]; /* per-fifo tx underflows */ - uint32 txtplunfl; /* Template underflows (mac was too slow to transmit ACK/CTS - * or BCN) - */ - uint32 txphyerror; /* Transmit phy error, type of error is reported in tx-status for - * driver enqueued frames - */ - uint32 rxfrmtoolong; /* Received frame longer than legal limit (2346 bytes) */ - uint32 rxfrmtooshrt; /* Received frame did not contain enough bytes for its frame type */ - uint32 rxinvmachdr; /* Either the protocol version != 0 or frame type not - * data/control/management - */ - uint32 rxbadfcs; /* number of frames for which the CRC check failed in the MAC */ - uint32 rxbadplcp; /* parity check of the PLCP header failed */ - uint32 rxcrsglitch; /* PHY was able to correlate the preamble but not the header */ - uint32 rxstrt; /* Number of received frames with a good PLCP - * (i.e. passing parity check) - */ - uint32 rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */ - uint32 rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */ - uint32 rxcfrmucast; /* number of received CNTRL frames with good FCS and matching RA */ - uint32 rxrtsucast; /* number of unicast RTS addressed to the MAC (good FCS) */ - uint32 rxctsucast; /* number of unicast CTS addressed to the MAC (good FCS) */ - uint32 rxackucast; /* number of ucast ACKS received (good FCS) */ - uint32 rxdfrmocast; /* number of received DATA frames (good FCS and not matching RA) */ - uint32 rxmfrmocast; /* number of received MGMT frames (good FCS and not matching RA) */ - uint32 rxcfrmocast; /* number of received CNTRL frame (good FCS and not matching RA) */ - uint32 rxrtsocast; /* number of received RTS not addressed to the MAC */ - uint32 rxctsocast; /* number of received CTS not addressed to the MAC */ - uint32 rxdfrmmcast; /* number of RX Data multicast frames received by the MAC */ - uint32 rxmfrmmcast; /* number of RX Management multicast frames received by the MAC */ - uint32 rxcfrmmcast; /* number of RX Control multicast frames received by the MAC - * (unlikely to see these) - */ - uint32 rxbeaconmbss; /* beacons received from member of BSS */ - uint32 rxdfrmucastobss; /* number of unicast frames addressed to the MAC from - * other BSS (WDS FRAME) - */ - uint32 rxbeaconobss; /* beacons received from other BSS */ - uint32 rxrsptmout; /* Number of response timeouts for transmitted frames - * expecting a response - */ - uint32 bcntxcancl; /* transmit beacons canceled due to receipt of beacon (IBSS) */ - uint32 rxf0ovfl; /* Number of receive fifo 0 overflows */ - uint32 rxf1ovfl; /* Number of receive fifo 1 overflows (obsolete) */ - uint32 rxf2ovfl; /* Number of receive fifo 2 overflows (obsolete) */ - uint32 txsfovfl; /* Number of transmit status fifo overflows (obsolete) */ - uint32 pmqovfl; /* Number of PMQ overflows */ - uint32 rxcgprqfrm; /* Number of received Probe requests that made it into - * the PRQ fifo - */ - uint32 rxcgprsqovfl; /* Rx Probe Request Que overflow in the AP */ - uint32 txcgprsfail; /* Tx Probe Response Fail. AP sent probe response but did - * not get ACK - */ - uint32 txcgprssuc; /* Tx Probe Response Success (ACK was received) */ - uint32 prs_timeout; /* Number of probe requests that were dropped from the PRQ - * fifo because a probe response could not be sent out within - * the time limit defined in M_PRS_MAXTIME - */ - uint32 rxnack; /* Number of NACKS received (Afterburner) */ - uint32 frmscons; /* Number of frames completed without transmission because of an - * Afterburner re-queue - */ - uint32 txnack; /* Number of NACKs transmitted (Afterburner) */ - uint32 txglitch_nack; /* obsolete */ - uint32 txburst; /* obsolete */ - - /* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */ - uint32 txfrag; /* dot11TransmittedFragmentCount */ - uint32 txmulti; /* dot11MulticastTransmittedFrameCount */ - uint32 txfail; /* dot11FailedCount */ - uint32 txretry; /* dot11RetryCount */ - uint32 txretrie; /* dot11MultipleRetryCount */ - uint32 rxdup; /* dot11FrameduplicateCount */ - uint32 txrts; /* dot11RTSSuccessCount */ - uint32 txnocts; /* dot11RTSFailureCount */ - uint32 txnoack; /* dot11ACKFailureCount */ - uint32 rxfrag; /* dot11ReceivedFragmentCount */ - uint32 rxmulti; /* dot11MulticastReceivedFrameCount */ - uint32 rxcrc; /* dot11FCSErrorCount */ - uint32 txfrmsnt; /* dot11TransmittedFrameCount (bogus MIB?) */ - uint32 rxundec; /* dot11WEPUndecryptableCount */ - - /* WPA2 counters (see rxundec for DecryptFailureCount) */ - uint32 tkipmicfaill; /* TKIPLocalMICFailures */ - uint32 tkipcntrmsr; /* TKIPCounterMeasuresInvoked */ - uint32 tkipreplay; /* TKIPReplays */ - uint32 ccmpfmterr; /* CCMPFormatErrors */ - uint32 ccmpreplay; /* CCMPReplays */ - uint32 ccmpundec; /* CCMPDecryptErrors */ - uint32 fourwayfail; /* FourWayHandshakeFailures */ - uint32 wepundec; /* dot11WEPUndecryptableCount */ - uint32 wepicverr; /* dot11WEPICVErrorCount */ - uint32 decsuccess; /* DecryptSuccessCount */ - uint32 tkipicverr; /* TKIPICVErrorCount */ - uint32 wepexcluded; /* dot11WEPExcludedCount */ - - uint32 txchanrej; /* Tx frames suppressed due to channel rejection */ - uint32 psmwds; /* Count PSM watchdogs */ - uint32 phywatchdog; /* Count Phy lockups */ -} wl_cnt_t; - -#define WL_WME_CNT_VERSION 1 /* current version of wl_wme_cnt_t */ - -typedef struct { - uint32 packets; - uint32 bytes; -} wl_traffic_stats_t; - -typedef struct { - uint16 version; /* see definition of WL_CNT_T_VERSION */ - uint16 length; /* length of entire structure */ - - wl_traffic_stats_t tx[AC_COUNT]; /* Packets transmitted */ - wl_traffic_stats_t tx_failed[AC_COUNT]; /* Packets dropped or failed to transmit */ - wl_traffic_stats_t rx[AC_COUNT]; /* Packets received */ - wl_traffic_stats_t rx_failed[AC_COUNT]; /* Packets failed to receive */ - - wl_traffic_stats_t forward[AC_COUNT]; /* Packets forwarded by AP */ - - wl_traffic_stats_t tx_expired[AC_COUNT]; /* packets dropped due to lifetime expiry */ - -} wl_wme_cnt_t; - -#ifdef WLBA - -#define WLC_BA_CNT_VERSION 1 /* current version of wlc_ba_cnt_t */ - -/* block ack related stats */ -typedef struct wlc_ba_cnt { - uint16 version; /* WLC_BA_CNT_VERSION */ - uint16 length; /* length of entire structure */ - - /* transmit stat counters */ - uint32 txpdu; /* pdus sent */ - uint32 txsdu; /* sdus sent */ - uint32 txfc; /* tx side flow controlled packets */ - uint32 txfci; /* tx side flow control initiated */ - uint32 txretrans; /* retransmitted pdus */ - uint32 txbatimer; /* ba resend due to timer */ - uint32 txdrop; /* dropped packets */ - uint32 txaddbareq; /* addba req sent */ - uint32 txaddbaresp; /* addba resp sent */ - uint32 txdelba; /* delba sent */ - uint32 txba; /* ba sent */ - uint32 txbar; /* bar sent */ - uint32 txpad[4]; /* future */ - - /* receive side counters */ - uint32 rxpdu; /* pdus recd */ - uint32 rxqed; /* pdus buffered before sending up */ - uint32 rxdup; /* duplicate pdus */ - uint32 rxnobuf; /* pdus discarded due to no buf */ - uint32 rxaddbareq; /* addba req recd */ - uint32 rxaddbaresp; /* addba resp recd */ - uint32 rxdelba; /* delba recd */ - uint32 rxba; /* ba recd */ - uint32 rxbar; /* bar recd */ - uint32 rxinvba; /* invalid ba recd */ - uint32 rxbaholes; /* ba recd with holes */ - uint32 rxunexp; /* unexpected packets */ - uint32 rxpad[4]; /* future */ -} wlc_ba_cnt_t; -#endif /* WLBA */ - -/* structure for per-tid ampdu control */ -struct ampdu_tid_control { - uint8 tid; /* tid */ - uint8 enable; /* enable/disable */ -}; - -/* structure for addts arguments */ -/* For ioctls that take a list of TSPEC */ -struct tslist { - int count; /* number of tspecs */ - struct tsinfo_arg tsinfo[1]; /* variable length array of tsinfo */ -}; - -/* structure for addts/delts arguments */ -typedef struct tspec_arg { - uint16 version; /* see definition of TSPEC_ARG_VERSION */ - uint16 length; /* length of entire structure */ - uint flag; /* bit field */ - /* TSPEC Arguments */ - struct tsinfo_arg tsinfo; /* TS Info bit field */ - uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */ - uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */ - uint min_srv_interval; /* Minimum Service Interval (us) */ - uint max_srv_interval; /* Maximum Service Interval (us) */ - uint inactivity_interval; /* Inactivity Interval (us) */ - uint suspension_interval; /* Suspension Interval (us) */ - uint srv_start_time; /* Service Start Time (us) */ - uint min_data_rate; /* Minimum Data Rate (bps) */ - uint mean_data_rate; /* Mean Data Rate (bps) */ - uint peak_data_rate; /* Peak Data Rate (bps) */ - uint max_burst_size; /* Maximum Burst Size (bytes) */ - uint delay_bound; /* Delay Bound (us) */ - uint min_phy_rate; /* Minimum PHY Rate (bps) */ - uint16 surplus_bw; /* Surplus Bandwidth Allowance Factor */ - uint16 medium_time; /* Medium Time (32 us/s periods) */ -} tspec_arg_t; - -/* current version of wl_tspec_arg_t struct */ -#define TSPEC_ARG_VERSION 1 /* current version of wl_tspec_arg_t struct */ -#define TSPEC_ARG_LENGTH 55 /* argment length from tsinfo to medium_time */ - -/* define for flag */ -#define TSPEC_PENDING 0 /* TSPEC pending */ -#define TSPEC_ACCEPTED 1 /* TSPEC accepted */ -#define TSPEC_REJECTED 2 /* TSPEC rejected */ -#define TSPEC_UNKNOWN 3 /* TSPEC unknown */ -#define TSPEC_STATUS_MASK 7 /* TSPEC status mask */ - - -/* Software feature flag defines used by wlfeatureflag */ -#define WL_SWFL_ABBFL 0x0001 /* Allow Afterburner on systems w/o hardware BFL */ -#define WL_SWFL_ABENCORE 0x0002 /* Allow AB on non-4318E chips */ - -#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */ - -/* Packet lifetime configuration per ac */ -typedef struct wl_lifetime { - uint32 ac; /* access class */ - uint32 lifetime; /* Packet lifetime value in ms */ -} wl_lifetime_t; - -#endif /* _wlioctl_h_ */ diff --git a/package/broadcom-wl-old/src/include/wlutils.h b/package/broadcom-wl-old/src/include/wlutils.h deleted file mode 100644 index 4436c7b1a8..0000000000 --- a/package/broadcom-wl-old/src/include/wlutils.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Broadcom wireless network adapter utility functions - * - * Copyright 2006, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - */ - -#ifndef _wlutils_h_ -#define _wlutils_h_ - -#include -#include - -/* - * Pass a wlioctl request to the specified interface. - * @param name interface name - * @param cmd WLC_GET_MAGIC <= cmd < WLC_LAST - * @param buf buffer for passing in and/or receiving data - * @param len length of buf - * @return >= 0 if successful or < 0 otherwise - */ -extern int wl_ioctl(char *name, int cmd, void *buf, int len); - -/* - * Probe the specified interface. - * @param name interface name - * @return >= 0 if a Broadcom wireless device or < 0 otherwise - */ -extern int wl_probe(char *name); - -extern int wl_iovar_set(char *ifname, char *iovar, void *param, int paramlen); -extern int wl_iovar_get(char *ifname, char *iovar, void *bufptr, int buflen); -/* - * Set/Get named variable. - * @param ifname interface name - * @param iovar variable name - * @param param input param value/buffer - * @param paramlen input param value/buffer length - * @param bufptr io buffer - * @param buflen io buffer length - * @param val val or val pointer for int routines - * @return success == 0, failure != 0 - */ -/* - * set named driver variable to int value - * calling example: wl_iovar_setint(ifname, "arate", rate) -*/ -static inline int -wl_iovar_setint(char *ifname, char *iovar, int val) -{ - return wl_iovar_set(ifname, iovar, &val, sizeof(val)); -} - -/* - * get named driver variable to int value and return error indication - * calling example: wl_iovar_getint(ifname, "arate", &rate) - */ -static inline int -wl_iovar_getint(char *ifname, char *iovar, int *val) -{ - return wl_iovar_get(ifname, iovar, val, sizeof(int)); -} - -/* - * Set/Get named variable indexed by BSS Configuration - * @param ifname interface name - * @param iovar variable name - * @param bssidx bsscfg index - * @param param input param value/buffer - * @param paramlen input param value/buffer length - * @param bufptr io buffer - * @param buflen io buffer length - * @param val val or val pointer for int routines - * @return success == 0, failure != 0 - */ -extern int wl_bssiovar_get(char *ifname, char *iovar, int bssidx, void *outbuf, int len); -extern int wl_bssiovar_set(char *ifname, char *iovar, int bssidx, void *param, int paramlen); -/* - * set named & bss indexed driver variable to int value - */ -static inline int -wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val) -{ - return wl_bssiovar_set(ifname, iovar, bssidx, &val, sizeof(int)); -} - -static inline int -wl_bssiovar_getint(char *ifname, char *iovar, int bssidx, int *val) -{ - return wl_bssiovar_get(ifname, iovar, bssidx, val, sizeof(int)); -} - -extern int wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val); - -#endif /* _wlutils_h_ */ -- cgit v1.2.3