From 725611a466f2edf12f809d22339b22223af4afe7 Mon Sep 17 00:00:00 2001 From: nbd Date: Sat, 7 Oct 2006 11:57:20 +0000 Subject: move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the developers are ready git-svn-id: svn://svn.openwrt.org/openwrt/trunk@4944 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt | 11 --- .../hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt | 83 ------------------- openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt | 21 ----- .../docs/hardware/linksys/wrt54gs_v11/nvram.txt | 94 ---------------------- openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt | 37 --------- 5 files changed, 246 deletions(-) delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt delete mode 100644 openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt (limited to 'openwrt/docs/hardware/linksys/wrt54gs_v11') diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt deleted file mode 100644 index 8a5ba8fd99..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/cpuinfo.txt +++ /dev/null @@ -1,11 +0,0 @@ -system type : Broadcom BCM947XX -processor : 0 -cpu model : BCM3302 V0.7 -BogoMIPS : 215.44 -wait instruction : no -microsecond timers : yes -tlb_entries : 32 -extra interrupt vector : no -hardware watchpoint : no -VCED exceptions : not available -VCEI exceptions : not available diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt deleted file mode 100644 index 22afd53dc2..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/dmesg-2_4_30.txt +++ /dev/null @@ -1,83 +0,0 @@ -CPU revision is: 00029007 -Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. -Primary data cache 4kB, 2-way, linesize 16 bytes. -Linux version 2.4.30 (kaloz@richese) (gcc version 3.4.3) #1 2005. máj. 20., péntek, 16.07.34 CEST -Determined physical RAM map: - memory: 02000000 @ 00000000 (usable) -On node 0 totalpages: 8192 -zone(0): 8192 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 -CPU: BCM4712 rev 1 at 216 MHz -Using 108.000 MHz high precision timer. -Calibrating delay loop... 215.44 BogoMIPS -Memory: 30256k/32768k available (1512k kernel code, 2512k reserved, 104k data, 88k init, 0k highmem) -Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) -Inode cache hash table entries: 2048 (order: 2, 16384 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) -Page-cache hash table entries: 8192 (order: 3, 32768 bytes) -Checking for 'wait' instruction... unavailable. -POSIX conformance testing by UNIFIX -PCI: Disabled -PCI: Fixing up bus 0 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) -devfs: boot_options: 0x1 -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xb8000300 (irq = 3) is a 16550A -ttyS01 at 0xb8000400 (irq = 0) is a 16550A -Software Watchdog Timer: 0.05, timer margin: 60 sec -loop: loaded (max 8 devices) -Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 -Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 -cfi_cmdset_0001: Erase suspend on write enabled -0: offset=0x0,size=0x20000,blocks=64 -Using buffer write method -Flash device: 0x800000 at 0x1c000000 -Creating 4 MTD partitions on "Physically mapped flash": -0x00000000-0x00040000 : "pmon" -0x00040000-0x007e0000 : "linux" -0x000c0000-0x007e0000 : "rootfs" -0x007e0000-0x00800000 : "nvram" -Initializing Cryptographic API -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 2048 bind 4096) -ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack -ip_tables: (C) 2000-2002 Netfilter core team -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -NET4: Ethernet Bridge 008 for NET4.0 -Bridge firewalling registered -802.1Q VLAN Support v1.8 Ben Greear -All bugs added by David S. Miller -VFS: Mounted root (jffs2 filesystem) readonly. -Mounted devfs on /dev -Freeing unused kernel memory: 88k freed -Algorithmics/MIPS FPU Emulator v1.5 -diag boardtype: 00000708 -jffs2.bbc: SIZE compression mode activated. -b44.c:v0.93 (Mar, 2004) -PCI: Setting latency timer of device 00:02.0 to 64 -eth0: Broadcom 47xx 10/100BaseT Ethernet 00:13:10:07:ee:fc -PCI: Setting latency timer of device 00:01.0 to 64 -eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 -device eth0 entered promiscuous mode -vlan0: add 01:00:5e:00:00:01 mcast address to master interface -device eth1 entered promiscuous mode -br0: port 2(eth1) entering learning state -br0: port 1(vlan0) entering learning state -br0: port 2(eth1) entering forwarding state -br0: topology change detected, propagating -br0: port 1(vlan0) entering forwarding state -br0: topology change detected, propagating -vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt deleted file mode 100644 index 325f4cd737..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/info.txt +++ /dev/null @@ -1,21 +0,0 @@ -Linksys WRT54GS v1.1 - -Online Description from Linksys: -http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=610 - -CPU: BCM4712 at 216 MHz -RAM: 32 MB -Flash: 8 MB -1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller -1 Broadcom BCM4320 802.11 Wireless Controller -serial port possible -JTAG interface - -List of files: -nvram.txt: contents of NVRAM after nvram erase and adjusted cpu speed -cpuinfo.txt: contents of /proc/cpuinfo with adjusted cpu speed (2.4.30) -pci.txt: contents of /proc/pci (2.4.30) -dmesg-2_4_30.txt: dmesg from Kernel 2.4.30 (using b44 and robocfg) - -Notes: -CPU runs at 200MHz default, You should adjust it to 216Mhz, as that fixes the problems during high network load. diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt deleted file mode 100644 index 9baf982af0..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/nvram.txt +++ /dev/null @@ -1,94 +0,0 @@ -wl0_net_mode=mixed -os_ram_addr=80001000 -wl0_frameburst=off -boardrev=0x10 -il0macaddr=00:13:10:07:ee:fe -bootnv_ver=2 -et0macaddr=00:13:10:07:EE:FC -boot_wait=on -watchdog=5000 -wl0_infra=1 -wl0_country_code=AU -et0mdcport=0 -pmon_ver=CFE 3.61.13.0 -wl0_ifname=eth1 -gpio5=robo_reset -vlan0ports=1 2 3 4 5* -wl0_mode=ap -wl0_ap_isolate=0 -os_flash_addr=bfc40000 -wl0_gmode=6 -sromrev=2 -boardtype=0x0708 -lan_netmask=255.255.255.0 -wl0_dtim=1 -wl0_ssid=OpenWrt -wl0_key1= -wl0id=0x4320 -wl0_key2= -wl0_key3= -wl0_key4= -ag0=255 -wl0_plcphdr=long -wl0_rate=0 -wl0_closed=0 -wl0_macmode=disabled -wl0_radioids=BCM2050 -wl0_phytype=g -wl0gpio2=0 -wl0_lazywds=0 -wl0gpio3=0 -boardflags2=0 -wl0_afterburner=auto -wl0_antdiv=-1 -wl0_wpa_psk= -wl0_unit=0 -wl_country_code=AU -pa0itssit=62 -wl0_wds= -cctl=0 -wl0_radius_port=1812 -wl0_auth=0 -wl0_radius_ipaddr= -pa0maxpwr=0x4e -clkfreq=216 -lan_ipaddr=192.168.1.1 -vlan1hwname=et0 -aa0=3 -wl0_phytypes=g -wl0_frag=2346 -wl0_wep=disabled -sdram_config=0x0062 -wl0_country= -vlan1ports=0 5 -scratch=a0180000 -eou_private_key=3979dac822dd40eb1739886261d8c48fc437335ed9b2d851aba651c25718c2fd3e1a4607373b1e3570d5d79adafab37767853749eee724bb7b60d4ed1dae316144c33b1e39547f25d4e9a7b13df509a902f60e76d0db8f5089020b274792b4c39895fa45c88dfe73d544de5d0fed9ac1610309756c6632d2811a6a255769b0c9 -ccode=0 -wl0_rateset=default -eou_device_id=F7QVRQQK -boardflags=0x0318 -sdram_refresh=0x0000 -sdram_ncdl=0xff0007 -wl0_rts=2347 -wl0_wpa_gtk_rekey=3600 -wl0_key=1 -et0phyaddr=30 -wl0_radio=1 -wl0_bcn=100 -wl0_hwaddr=00:13:10:07:EE:FE -wl0_gmode_protection=auto -pa0b0=0x15eb -wl0_maclist= -pa0b1=0xfa82 -pa0b2=0xfe66 -sdram_init=0x000b -vlan0hwname=et0 -dl_ram_addr=a0001000 -wl0_radius_key= -wl0_corerev=7 -wl0_channel=11 -wl0_auth_mode=open -boot_ver=v3.4 -wl0_crypto=tkip -boardnum=42 -eou_public_key=c36b1b0edcf0431f4ef6cfb4e647691c01887b75b0f9ac48e1357c618e8763c36cbfbae5556299e8e60a4374e8879562c65e88c82c45167d70493a5964e9db1942bc4b73b6d3571249294298a429ca8b199b8f48e2df35ceff68aec2dee787a18167ddc78876cd179f26f016ab1d7722c7d284a76e42e0ebb3fb32d984e10b2b11 diff --git a/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt b/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt deleted file mode 100644 index 2be172663f..0000000000 --- a/openwrt/docs/hardware/linksys/wrt54gs_v11/pci.txt +++ /dev/null @@ -1,37 +0,0 @@ -PCI devices found: - Bus 0, device 0, function 0: - Class 0501: PCI device 14e4:0800 (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff]. - Non-prefetchable 32 bit memory at 0x1fc00000 [0x1fffffff]. - Non-prefetchable 32 bit memory at 0x1c000000 [0x1dffffff]. - Non-prefetchable 32 bit memory at 0x1a000000 [0x1bffffff]. - Bus 0, device 1, function 0: - Class 0280: PCI device 14e4:4320 (rev 1). - IRQ 4. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. - Bus 0, device 2, function 0: - Class 0200: PCI device 14e4:4713 (rev 1). - IRQ 5. - Master Capable. Latency=64. - Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff]. - Bus 0, device 3, function 0: - Class 0c03: PCI device 14e4:4717 (rev 1). - IRQ 6. - Non-prefetchable 32 bit memory at 0x18003000 [0x18003fff]. - Bus 0, device 4, function 0: - Class 0c03: PCI device 14e4:4716 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff]. - Bus 0, device 5, function 0: - Class 0b30: PCI device 14e4:0816 (rev 1). - IRQ 2. - Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff]. - Bus 0, device 6, function 0: - Class 0500: PCI device 14e4:080f (rev 1). - IRQ 3. - Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff]. - Non-prefetchable 32 bit memory at 0x0 [0x7ffffff]. - Non-prefetchable 32 bit memory at 0x10000000 [0x17ffffff]. - Non-prefetchable 32 bit memory at 0x80000000 [0x9fffffff]. -- cgit v1.2.3