From f2e819380237b0e92478bed67d15b5b54476f519 Mon Sep 17 00:00:00 2001 From: nbd Date: Fri, 25 Dec 2009 10:34:21 +0000 Subject: deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic files/ git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18927 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../files-2.6.30/drivers/char/gpio_dev.c | 201 --------- .../files-2.6.30/drivers/input/misc/gpio_buttons.c | 209 ---------- .../files-2.6.30/drivers/leds/ledtrig-morse.c | 365 ----------------- .../files-2.6.30/drivers/leds/ledtrig-netdev.c | 451 --------------------- .../files-2.6.30/include/linux/glamo-engine.h | 27 -- .../files-2.6.30/include/linux/glamofb.h | 35 -- .../files-2.6.30/include/linux/gpio_buttons.h | 35 -- .../files-2.6.30/include/linux/gpio_dev.h | 11 - .../files-2.6.31/drivers/char/gpio_dev.c | 201 --------- .../files-2.6.31/drivers/input/misc/gpio_buttons.c | 209 ---------- .../files-2.6.31/drivers/leds/ledtrig-morse.c | 365 ----------------- .../files-2.6.31/drivers/leds/ledtrig-netdev.c | 451 --------------------- .../files-2.6.31/include/linux/glamo-engine.h | 27 -- .../files-2.6.31/include/linux/glamofb.h | 35 -- .../files-2.6.31/include/linux/gpio_buttons.h | 35 -- .../files-2.6.31/include/linux/gpio_dev.h | 11 - .../files-2.6.32/drivers/char/gpio_dev.c | 201 --------- .../files-2.6.32/drivers/input/misc/gpio_buttons.c | 209 ---------- .../files-2.6.32/drivers/leds/ledtrig-morse.c | 365 ----------------- .../files-2.6.32/drivers/leds/ledtrig-netdev.c | 451 --------------------- .../files-2.6.32/include/linux/glamo-engine.h | 27 -- .../files-2.6.32/include/linux/glamofb.h | 35 -- .../files-2.6.32/include/linux/gpio_buttons.h | 35 -- .../files-2.6.32/include/linux/gpio_dev.h | 11 - .../generic-2.6/files/drivers/char/gpio_dev.c | 201 +++++++++ .../files/drivers/input/misc/gpio_buttons.c | 209 ++++++++++ .../generic-2.6/files/drivers/leds/ledtrig-morse.c | 365 +++++++++++++++++ .../files/drivers/leds/ledtrig-netdev.c | 451 +++++++++++++++++++++ .../generic-2.6/files/include/linux/glamo-engine.h | 27 ++ .../generic-2.6/files/include/linux/glamofb.h | 35 ++ .../generic-2.6/files/include/linux/gpio_buttons.h | 35 ++ .../generic-2.6/files/include/linux/gpio_dev.h | 11 + 32 files changed, 1334 insertions(+), 4002 deletions(-) delete mode 100644 target/linux/generic-2.6/files-2.6.30/drivers/char/gpio_dev.c delete mode 100644 target/linux/generic-2.6/files-2.6.30/drivers/input/misc/gpio_buttons.c delete mode 100644 target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-morse.c delete mode 100644 target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-netdev.c delete mode 100644 target/linux/generic-2.6/files-2.6.30/include/linux/glamo-engine.h delete mode 100644 target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h delete mode 100644 target/linux/generic-2.6/files-2.6.30/include/linux/gpio_buttons.h delete mode 100644 target/linux/generic-2.6/files-2.6.30/include/linux/gpio_dev.h delete mode 100644 target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c delete mode 100644 target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c delete mode 100644 target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c delete mode 100644 target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c delete mode 100644 target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h delete mode 100644 target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h delete mode 100644 target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h delete mode 100644 target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h delete mode 100644 target/linux/generic-2.6/files-2.6.32/drivers/char/gpio_dev.c delete mode 100644 target/linux/generic-2.6/files-2.6.32/drivers/input/misc/gpio_buttons.c delete mode 100644 target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-morse.c delete mode 100644 target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-netdev.c delete mode 100644 target/linux/generic-2.6/files-2.6.32/include/linux/glamo-engine.h delete mode 100644 target/linux/generic-2.6/files-2.6.32/include/linux/glamofb.h delete mode 100644 target/linux/generic-2.6/files-2.6.32/include/linux/gpio_buttons.h delete mode 100644 target/linux/generic-2.6/files-2.6.32/include/linux/gpio_dev.h create mode 100644 target/linux/generic-2.6/files/drivers/char/gpio_dev.c create mode 100644 target/linux/generic-2.6/files/drivers/input/misc/gpio_buttons.c create mode 100644 target/linux/generic-2.6/files/drivers/leds/ledtrig-morse.c create mode 100644 target/linux/generic-2.6/files/drivers/leds/ledtrig-netdev.c create mode 100644 target/linux/generic-2.6/files/include/linux/glamo-engine.h create mode 100644 target/linux/generic-2.6/files/include/linux/glamofb.h create mode 100644 target/linux/generic-2.6/files/include/linux/gpio_buttons.h create mode 100644 target/linux/generic-2.6/files/include/linux/gpio_dev.h diff --git a/target/linux/generic-2.6/files-2.6.30/drivers/char/gpio_dev.c b/target/linux/generic-2.6/files-2.6.30/drivers/char/gpio_dev.c deleted file mode 100644 index 8392fcf2d6..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/drivers/char/gpio_dev.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * character device wrapper for generic gpio layer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA - * - * Feedback, Bugs... blogic@openwrt.org - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRVNAME "gpiodev" -#define DEVNAME "gpio" - -static int dev_major; -static unsigned int gpio_access_mask; -static struct class *gpiodev_class; - -/* Counter is 1, if the device is not opened and zero (or less) if opened. */ -static atomic_t gpio_open_cnt = ATOMIC_INIT(1); - -static int -gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg) -{ - int retval = 0; - - if (((1 << arg) & gpio_access_mask) != (1 << arg)) - { - retval = -EINVAL; - goto out; - } - - switch (cmd) - { - case GPIO_GET: - retval = gpio_get_value(arg); - break; - - case GPIO_SET: - gpio_set_value(arg, 1); - break; - - case GPIO_CLEAR: - gpio_set_value(arg, 0); - break; - - case GPIO_DIR_IN: - gpio_direction_input(arg); - break; - - case GPIO_DIR_OUT: - gpio_direction_output(arg, 0); - break; - - default: - retval = -EINVAL; - break; - } - -out: - return retval; -} - -static int -gpio_open(struct inode *inode, struct file *file) -{ - int result = 0; - unsigned int dev_minor = MINOR(inode->i_rdev); - - if (dev_minor != 0) - { - printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor); - result = -ENODEV; - goto out; - } - - /* FIXME: We should really allow multiple applications to open the device - * at the same time, as long as the apps access different IO pins. - * The generic gpio-registration functions can be used for that. - * Two new IOCTLs have to be introduced for that. Need to check userspace - * compatibility first. --mb */ - if (!atomic_dec_and_test(&gpio_open_cnt)) { - atomic_inc(&gpio_open_cnt); - printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor); - result = -EBUSY; - goto out; - } - -out: - return result; -} - -static int -gpio_close(struct inode * inode, struct file * file) -{ - smp_mb__before_atomic_inc(); - atomic_inc(&gpio_open_cnt); - - return 0; -} - -struct file_operations gpio_fops = { - ioctl: gpio_ioctl, - open: gpio_open, - release: gpio_close -}; - -static int -gpio_probe(struct platform_device *dev) -{ - int result = 0; - - dev_major = register_chrdev(0, DEVNAME, &gpio_fops); - if (!dev_major) - { - printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME); - result = -ENODEV; - goto out; - } - - gpiodev_class = class_create(THIS_MODULE, DRVNAME); - device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME); - - printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major); - - if (dev->num_resources != 1) - { - printk(KERN_ERR DRVNAME ": device may only have 1 resource\n"); - result = -ENODEV; - goto out; - } - - gpio_access_mask = dev->resource[0].start; - - printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask); -out: - return result; -} - -static int -gpio_remove(struct platform_device *dev) -{ - unregister_chrdev(dev_major, DEVNAME); - return 0; -} - -static struct -platform_driver gpio_driver = { - .probe = gpio_probe, - .remove = gpio_remove, - .driver = { - .name = "GPIODEV", - .owner = THIS_MODULE, - }, -}; - -static int __init -gpio_mod_init(void) -{ - int ret = platform_driver_register(&gpio_driver); - if (ret) - printk(KERN_INFO DRVNAME ": Error registering platfom driver!"); - - return ret; -} - -static void __exit -gpio_mod_exit(void) -{ - platform_driver_unregister(&gpio_driver); -} - -module_init (gpio_mod_init); -module_exit (gpio_mod_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("John Crispin / OpenWrt"); -MODULE_DESCRIPTION("Character device for for generic gpio api"); diff --git a/target/linux/generic-2.6/files-2.6.30/drivers/input/misc/gpio_buttons.c b/target/linux/generic-2.6/files-2.6.30/drivers/input/misc/gpio_buttons.c deleted file mode 100644 index 83a8178340..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/drivers/input/misc/gpio_buttons.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Driver for buttons on GPIO lines not capable of generating interrupts - * - * Copyright (C) 2007,2008 Gabor Juhos - * - * This file was based on: /drivers/input/misc/cobalt_btns.c - * Copyright (C) 2007 Yoichi Yuasa - * - * also was based on: /drivers/input/keyboard/gpio_keys.c - * Copyright 2005 Phil Blundell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include - -#define DRV_NAME "gpio-buttons" -#define DRV_VERSION "0.1.1" -#define PFX DRV_NAME ": " - -struct gpio_buttons_dev { - struct input_polled_dev *poll_dev; - struct gpio_buttons_platform_data *pdata; -}; - -static void gpio_buttons_poll(struct input_polled_dev *dev) -{ - struct gpio_buttons_dev *bdev = dev->private; - struct gpio_buttons_platform_data *pdata = bdev->pdata; - struct input_dev *input = dev->input; - int i; - - for (i = 0; i < bdev->pdata->nbuttons; i++) { - struct gpio_button *button = &pdata->buttons[i]; - unsigned int type = button->type ?: EV_KEY; - int state; - - state = gpio_get_value(button->gpio) ? 1 : 0; - state ^= button->active_low; - - if (state) { - button->count++; - } else { - if (button->count >= button->threshold) { - input_event(input, type, button->code, 1); - input_sync(input); - } - button->count = 0; - } - - if (button->count == button->threshold) { - input_event(input, type, button->code, 0); - input_sync(input); - } - } -} - -static int __devinit gpio_buttons_probe(struct platform_device *pdev) -{ - struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data; - struct gpio_buttons_dev *bdev; - struct input_polled_dev *poll_dev; - struct input_dev *input; - int error, i; - - - if (!pdata) - return -ENXIO; - - bdev = kzalloc(sizeof(*bdev), GFP_KERNEL); - if (!bdev) { - printk(KERN_ERR DRV_NAME "no memory for device\n"); - return -ENOMEM; - } - - poll_dev = input_allocate_polled_device(); - if (!poll_dev) { - printk(KERN_ERR DRV_NAME "no memory for polled device\n"); - error = -ENOMEM; - goto err_free_bdev; - } - - poll_dev->private = bdev; - poll_dev->poll = gpio_buttons_poll; - poll_dev->poll_interval = pdata->poll_interval; - - input = poll_dev->input; - - input->evbit[0] = BIT(EV_KEY); - input->name = pdev->name; - input->phys = "gpio-buttons/input0"; - input->dev.parent = &pdev->dev; - - input->id.bustype = BUS_HOST; - input->id.vendor = 0x0001; - input->id.product = 0x0001; - input->id.version = 0x0100; - - for (i = 0; i < pdata->nbuttons; i++) { - struct gpio_button *button = &pdata->buttons[i]; - unsigned int gpio = button->gpio; - unsigned int type = button->type ?: EV_KEY; - - error = gpio_request(gpio, button->desc ? - button->desc : DRV_NAME); - if (error) { - printk(KERN_ERR PFX "unable to claim gpio %u, " - "error %d\n", gpio, error); - goto err_free_gpio; - } - - error = gpio_direction_input(gpio); - if (error) { - printk(KERN_ERR PFX "unable to set direction on " - "gpio %u, error %d\n", gpio, error); - goto err_free_gpio; - } - - input_set_capability(input, type, button->code); - button->count = 0; - } - - bdev->poll_dev = poll_dev; - bdev->pdata = pdata; - platform_set_drvdata(pdev, bdev); - - error = input_register_polled_device(poll_dev); - if (error) { - printk(KERN_ERR PFX "unable to register polled device, " - "error %d\n", error); - goto err_free_gpio; - } - - return 0; - -err_free_gpio: - for (i = i - 1; i >= 0; i--) - gpio_free(pdata->buttons[i].gpio); - - input_free_polled_device(poll_dev); - -err_free_bdev: - kfree(bdev); - - platform_set_drvdata(pdev, NULL); - return error; -} - -static int __devexit gpio_buttons_remove(struct platform_device *pdev) -{ - struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev); - struct gpio_buttons_platform_data *pdata = bdev->pdata; - int i; - - input_unregister_polled_device(bdev->poll_dev); - - for (i = 0; i < pdata->nbuttons; i++) - gpio_free(pdata->buttons[i].gpio); - - input_free_polled_device(bdev->poll_dev); - - kfree(bdev); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver gpio_buttons_driver = { - .probe = gpio_buttons_probe, - .remove = __devexit_p(gpio_buttons_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init gpio_buttons_init(void) -{ - printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n"); - return platform_driver_register(&gpio_buttons_driver); -} - -static void __exit gpio_buttons_exit(void) -{ - platform_driver_unregister(&gpio_buttons_driver); -} - -module_init(gpio_buttons_init); -module_exit(gpio_buttons_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs"); - diff --git a/target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-morse.c b/target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-morse.c deleted file mode 100644 index cb47480a36..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-morse.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * LED Morse Trigger - * - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on: drivers/led/ledtrig-timer.c - * Copyright 2005-2006 Openedhand Ltd. - * Author: Richard Purdie - * - * also based on the patch '[PATCH] 2.5.59 morse code panics' posted - * in the LKML by Tomas Szepe at Thu, 30 Jan 2003 - * Copyright (C) 2002 Andrew Rodland - * Copyright (C) 2003 Tomas Szepe - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "leds.h" - -#define MORSE_DELAY_BASE (HZ/2) - -#define MORSE_STATE_BLINK_START 0 -#define MORSE_STATE_BLINK_STOP 1 - -#define MORSE_DIT_LEN 1 -#define MORSE_DAH_LEN 3 -#define MORSE_SPACE_LEN 7 - -struct morse_trig_data { - unsigned long delay; - char *msg; - - unsigned char morse; - unsigned char state; - char *msgpos; - struct timer_list timer; -}; - -const unsigned char morsetable[] = { - 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */ - 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */ - 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */ - 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */ - 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */ - 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */ - 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */ - 0, 0, 0, 0, 0154 /* [\]^_ */ -}; - -static inline unsigned char tomorse(char c) { - if (c >= 'a' && c <= 'z') - c = c - 'a' + 'A'; - if (c >= '"' && c <= '_') { - return morsetable[c - '"']; - } else - return 0; -} - -static inline unsigned long dit_len(struct morse_trig_data *morse_data) -{ - return MORSE_DIT_LEN*morse_data->delay; -} - -static inline unsigned long dah_len(struct morse_trig_data *morse_data) -{ - return MORSE_DAH_LEN*morse_data->delay; -} - -static inline unsigned long space_len(struct morse_trig_data *morse_data) -{ - return MORSE_SPACE_LEN*morse_data->delay; -} - -static void morse_timer_function(unsigned long data) -{ - struct led_classdev *led_cdev = (struct led_classdev *)data; - struct morse_trig_data *morse_data = led_cdev->trigger_data; - unsigned long brightness = LED_OFF; - unsigned long delay = 0; - - if (!morse_data->msg) - goto set_led; - - switch (morse_data->state) { - case MORSE_STATE_BLINK_START: - /* Starting a new blink. We have a valid code in morse. */ - delay = (morse_data->morse & 001) ? dah_len(morse_data): - dit_len(morse_data); - brightness = LED_FULL; - morse_data->state = MORSE_STATE_BLINK_STOP; - morse_data->morse >>= 1; - break; - case MORSE_STATE_BLINK_STOP: - /* Coming off of a blink. */ - morse_data->state = MORSE_STATE_BLINK_START; - - if (morse_data->morse > 1) { - /* Not done yet, just a one-dit pause. */ - delay = dit_len(morse_data); - break; - } - - /* Get a new char, figure out how much space. */ - /* First time through */ - if (!morse_data->msgpos) - morse_data->msgpos = (char *)morse_data->msg; - - if (!*morse_data->msgpos) { - /* Repeating */ - morse_data->msgpos = (char *)morse_data->msg; - delay = space_len(morse_data); - } else { - /* Inter-letter space */ - delay = dah_len(morse_data); - } - - if (!(morse_data->morse = tomorse(*morse_data->msgpos))) { - delay = space_len(morse_data); - /* And get us back here */ - morse_data->state = MORSE_STATE_BLINK_STOP; - } - morse_data->msgpos++; - break; - } - - mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay)); - -set_led: - led_set_brightness(led_cdev, brightness); -} - -static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - sprintf(buf, "%lu\n", morse_data->delay); - - return strlen(buf) + 1; -} - -static ssize_t _morse_delay_store(struct led_classdev *led_cdev, - const char *buf, size_t size) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - char *after; - unsigned long state = simple_strtoul(buf, &after, 10); - size_t count = after - buf; - int ret = -EINVAL; - - if (*after && isspace(*after)) - count++; - - if (count == size) { - morse_data->delay = state; - mod_timer(&morse_data->timer, jiffies + 1); - ret = count; - } - - return ret; -} - -static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - if (!morse_data->msg) - sprintf(buf, "\n"); - else - sprintf(buf, "%s\n", morse_data->msg); - - return strlen(buf) + 1; -} - -static ssize_t _morse_msg_store(struct led_classdev *led_cdev, - const char *buf, size_t size) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - char *m; - - m = kmalloc(size, GFP_KERNEL); - if (!m) - return -ENOMEM; - - memcpy(m,buf,size); - m[size]='\0'; - - if (morse_data->msg) - kfree(morse_data->msg); - - morse_data->msg = m; - morse_data->msgpos = NULL; - morse_data->state = MORSE_STATE_BLINK_STOP; - - mod_timer(&morse_data->timer, jiffies + 1); - - return size; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) -static ssize_t morse_delay_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_delay_show(led_cdev, buf); -} - -static ssize_t morse_delay_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_delay_store(led_cdev, buf, size); -} - -static ssize_t morse_msg_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_msg_show(led_cdev, buf); -} - -static ssize_t morse_msg_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_msg_store(led_cdev, buf, size); -} - -static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); -static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); - -#define led_device_create_file(leddev, attr) \ - device_create_file(leddev->dev, &dev_attr_ ## attr) -#define led_device_remove_file(leddev, attr) \ - device_remove_file(leddev->dev, &dev_attr_ ## attr) - -#else -static ssize_t morse_delay_show(struct class_device *dev, char *buf) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_delay_show(led_cdev, buf); -} - -static ssize_t morse_delay_store(struct class_device *dev, const char *buf, - size_t size) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_delay_store(led_cdev, buf, size); -} - -static ssize_t morse_msg_show(struct class_device *dev, char *buf) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_msg_show(led_cdev, buf); -} - -static ssize_t morse_msg_store(struct class_device *dev, const char *buf, - size_t size) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_msg_store(led_cdev, buf, size); -} - -static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); -static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); - -#define led_device_create_file(leddev, attr) \ - class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr) -#define led_device_remove_file(leddev, attr) \ - class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr) - -#endif - -static void morse_trig_activate(struct led_classdev *led_cdev) -{ - struct morse_trig_data *morse_data; - int rc; - - morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL); - if (!morse_data) - return; - - morse_data->delay = MORSE_DELAY_BASE; - init_timer(&morse_data->timer); - morse_data->timer.function = morse_timer_function; - morse_data->timer.data = (unsigned long)led_cdev; - - rc = led_device_create_file(led_cdev, delay); - if (rc) goto err; - - rc = led_device_create_file(led_cdev, message); - if (rc) goto err_delay; - - led_cdev->trigger_data = morse_data; - - return; - -err_delay: - led_device_remove_file(led_cdev, delay); -err: - kfree(morse_data); -} - -static void morse_trig_deactivate(struct led_classdev *led_cdev) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - if (!morse_data) - return; - - led_device_remove_file(led_cdev, message); - led_device_remove_file(led_cdev, delay); - - del_timer_sync(&morse_data->timer); - if (morse_data->msg) - kfree(morse_data->msg); - - kfree(morse_data); -} - -static struct led_trigger morse_led_trigger = { - .name = "morse", - .activate = morse_trig_activate, - .deactivate = morse_trig_deactivate, -}; - -static int __init morse_trig_init(void) -{ - return led_trigger_register(&morse_led_trigger); -} - -static void __exit morse_trig_exit(void) -{ - led_trigger_unregister(&morse_led_trigger); -} - -module_init(morse_trig_init); -module_exit(morse_trig_exit); - -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION("Morse LED trigger"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-netdev.c b/target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-netdev.c deleted file mode 100644 index 8dba8e654d..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/drivers/leds/ledtrig-netdev.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * LED Kernel Netdev Trigger - * - * Toggles the LED to reflect the link and traffic state of a named net device - * - * Copyright 2007 Oliver Jowett - * - * Derived from ledtrig-timer.c which is: - * Copyright 2005-2006 Openedhand Ltd. - * Author: Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) -#include -#endif - -#include "leds.h" - -/* - * Configurable sysfs attributes: - * - * device_name - network device name to monitor - * - * interval - duration of LED blink, in milliseconds - * - * mode - either "none" (LED is off) or a space separated list of one or more of: - * link: LED's normal state reflects whether the link is up (has carrier) or not - * tx: LED blinks on transmitted data - * rx: LED blinks on receive data - * - * Some suggestions: - * - * Simple link status LED: - * $ echo netdev >someled/trigger - * $ echo eth0 >someled/device_name - * $ echo link >someled/mode - * - * Ethernet-style link/activity LED: - * $ echo netdev >someled/trigger - * $ echo eth0 >someled/device_name - * $ echo "link tx rx" >someled/mode - * - * Modem-style tx/rx LEDs: - * $ echo netdev >led1/trigger - * $ echo ppp0 >led1/device_name - * $ echo tx >led1/mode - * $ echo netdev >led2/trigger - * $ echo ppp0 >led2/device_name - * $ echo rx >led2/mode - * - */ - -#define MODE_LINK 1 -#define MODE_TX 2 -#define MODE_RX 4 - -struct led_netdev_data { - rwlock_t lock; - - struct timer_list timer; - struct notifier_block notifier; - - struct led_classdev *led_cdev; - struct net_device *net_dev; - - char device_name[IFNAMSIZ]; - unsigned interval; - unsigned mode; - unsigned link_up; - unsigned last_activity; -}; - -static void set_baseline_state(struct led_netdev_data *trigger_data) -{ - if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) - led_set_brightness(trigger_data->led_cdev, LED_FULL); - else - led_set_brightness(trigger_data->led_cdev, LED_OFF); - - if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up) - mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); - else - del_timer(&trigger_data->timer); -} - -static ssize_t led_device_name_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - sprintf(buf, "%s\n", trigger_data->device_name); - read_unlock(&trigger_data->lock); - - return strlen(buf) + 1; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) -extern struct net init_net; -#endif - -static ssize_t led_device_name_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - if (size < 0 || size >= IFNAMSIZ) - return -EINVAL; - - write_lock(&trigger_data->lock); - - strcpy(trigger_data->device_name, buf); - if (size > 0 && trigger_data->device_name[size-1] == '\n') - trigger_data->device_name[size-1] = 0; - - if (trigger_data->device_name[0] != 0) { - /* check for existing device to update from */ -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) - trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name); -#else - trigger_data->net_dev = dev_get_by_name(trigger_data->device_name); -#endif - if (trigger_data->net_dev != NULL) - trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0; - set_baseline_state(trigger_data); /* updates LEDs, may start timers */ - } - - write_unlock(&trigger_data->lock); - return size; -} - -static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store); - -static ssize_t led_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - - if (trigger_data->mode == 0) { - strcpy(buf, "none\n"); - } else { - if (trigger_data->mode & MODE_LINK) - strcat(buf, "link "); - if (trigger_data->mode & MODE_TX) - strcat(buf, "tx "); - if (trigger_data->mode & MODE_RX) - strcat(buf, "rx "); - strcat(buf, "\n"); - } - - read_unlock(&trigger_data->lock); - - return strlen(buf)+1; -} - -static ssize_t led_mode_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - char copybuf[1024]; - int new_mode = -1; - char *p, *token; - - /* take a copy since we don't want to trash the inbound buffer when using strsep */ - strncpy(copybuf, buf, sizeof(copybuf)); - copybuf[1023] = 0; - p = copybuf; - - while ((token = strsep(&p, " \t\n")) != NULL) { - if (!*token) - continue; - - if (new_mode == -1) - new_mode = 0; - - if (!strcmp(token, "none")) - new_mode = 0; - else if (!strcmp(token, "tx")) - new_mode |= MODE_TX; - else if (!strcmp(token, "rx")) - new_mode |= MODE_RX; - else if (!strcmp(token, "link")) - new_mode |= MODE_LINK; - else - return -EINVAL; - } - - if (new_mode == -1) - return -EINVAL; - - write_lock(&trigger_data->lock); - trigger_data->mode = new_mode; - set_baseline_state(trigger_data); - write_unlock(&trigger_data->lock); - - return size; -} - -static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store); - -static ssize_t led_interval_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval)); - read_unlock(&trigger_data->lock); - - return strlen(buf) + 1; -} - -static ssize_t led_interval_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - int ret = -EINVAL; - char *after; - unsigned long value = simple_strtoul(buf, &after, 10); - size_t count = after - buf; - - if (*after && isspace(*after)) - count++; - - /* impose some basic bounds on the timer interval */ - if (count == size && value >= 5 && value <= 10000) { - write_lock(&trigger_data->lock); - trigger_data->interval = msecs_to_jiffies(value); - set_baseline_state(trigger_data); // resets timer - write_unlock(&trigger_data->lock); - ret = count; - } - - return ret; -} - -static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store); - -static int netdev_trig_notify(struct notifier_block *nb, - unsigned long evt, - void *dv) -{ - struct net_device *dev = dv; - struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier); - - if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER) - return NOTIFY_DONE; - - write_lock(&trigger_data->lock); - - if (strcmp(dev->name, trigger_data->device_name)) - goto done; - - if (evt == NETDEV_REGISTER) { - if (trigger_data->net_dev != NULL) - dev_put(trigger_data->net_dev); - dev_hold(dev); - trigger_data->net_dev = dev; - trigger_data->link_up = 0; - goto done; - } - - if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) { - dev_put(trigger_data->net_dev); - trigger_data->net_dev = NULL; - goto done; - } - - /* UP / DOWN / CHANGE */ - - trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev)); - set_baseline_state(trigger_data); - -done: - write_unlock(&trigger_data->lock); - return NOTIFY_DONE; -} - -/* here's the real work! */ -static void netdev_trig_timer(unsigned long arg) -{ - struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg; - const struct net_device_stats *dev_stats; - unsigned new_activity; - - write_lock(&trigger_data->lock); - - if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) { - /* we don't need to do timer work, just reflect link state. */ - led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF); - goto no_restart; - } - - dev_stats = dev_get_stats(trigger_data->net_dev); - new_activity = - ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) + - ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0); - - if (trigger_data->mode & MODE_LINK) { - /* base state is ON (link present) */ - /* if there's no link, we don't get this far and the LED is off */ - - /* OFF -> ON always */ - /* ON -> OFF on activity */ - if (trigger_data->led_cdev->brightness == LED_OFF) { - led_set_brightness(trigger_data->led_cdev, LED_FULL); - } else if (trigger_data->last_activity != new_activity) { - led_set_brightness(trigger_data->led_cdev, LED_OFF); - } - } else { - /* base state is OFF */ - /* ON -> OFF always */ - /* OFF -> ON on activity */ - if (trigger_data->led_cdev->brightness == LED_FULL) { - led_set_brightness(trigger_data->led_cdev, LED_OFF); - } else if (trigger_data->last_activity != new_activity) { - led_set_brightness(trigger_data->led_cdev, LED_FULL); - } - } - - trigger_data->last_activity = new_activity; - mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); - -no_restart: - write_unlock(&trigger_data->lock); -} - -static void netdev_trig_activate(struct led_classdev *led_cdev) -{ - struct led_netdev_data *trigger_data; - int rc; - - trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); - if (!trigger_data) - return; - - rwlock_init(&trigger_data->lock); - - trigger_data->notifier.notifier_call = netdev_trig_notify; - trigger_data->notifier.priority = 10; - - setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data); - - trigger_data->led_cdev = led_cdev; - trigger_data->net_dev = NULL; - trigger_data->device_name[0] = 0; - - trigger_data->mode = 0; - trigger_data->interval = msecs_to_jiffies(50); - trigger_data->link_up = 0; - trigger_data->last_activity = 0; - - led_cdev->trigger_data = trigger_data; - - rc = device_create_file(led_cdev->dev, &dev_attr_device_name); - if (rc) - goto err_out; - rc = device_create_file(led_cdev->dev, &dev_attr_mode); - if (rc) - goto err_out_device_name; - rc = device_create_file(led_cdev->dev, &dev_attr_interval); - if (rc) - goto err_out_mode; - - register_netdevice_notifier(&trigger_data->notifier); - return; - -err_out_mode: - device_remove_file(led_cdev->dev, &dev_attr_mode); -err_out_device_name: - device_remove_file(led_cdev->dev, &dev_attr_device_name); -err_out: - led_cdev->trigger_data = NULL; - kfree(trigger_data); -} - -static void netdev_trig_deactivate(struct led_classdev *led_cdev) -{ - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - if (trigger_data) { - unregister_netdevice_notifier(&trigger_data->notifier); - - device_remove_file(led_cdev->dev, &dev_attr_device_name); - device_remove_file(led_cdev->dev, &dev_attr_mode); - device_remove_file(led_cdev->dev, &dev_attr_interval); - - write_lock(&trigger_data->lock); - - if (trigger_data->net_dev) { - dev_put(trigger_data->net_dev); - trigger_data->net_dev = NULL; - } - - write_unlock(&trigger_data->lock); - - del_timer_sync(&trigger_data->timer); - - kfree(trigger_data); - } -} - -static struct led_trigger netdev_led_trigger = { - .name = "netdev", - .activate = netdev_trig_activate, - .deactivate = netdev_trig_deactivate, -}; - -static int __init netdev_trig_init(void) -{ - return led_trigger_register(&netdev_led_trigger); -} - -static void __exit netdev_trig_exit(void) -{ - led_trigger_unregister(&netdev_led_trigger); -} - -module_init(netdev_trig_init); -module_exit(netdev_trig_exit); - -MODULE_AUTHOR("Oliver Jowett "); -MODULE_DESCRIPTION("Netdev LED trigger"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.30/include/linux/glamo-engine.h b/target/linux/generic-2.6/files-2.6.30/include/linux/glamo-engine.h deleted file mode 100644 index 516d45fa6e..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/include/linux/glamo-engine.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __GLAMO_ENGINE_H -#define __GLAMO_ENGINE_H - -enum glamo_engine { - GLAMO_ENGINE_CAPTURE = 0, - GLAMO_ENGINE_ISP = 1, - GLAMO_ENGINE_JPEG = 2, - GLAMO_ENGINE_MPEG_ENC = 3, - GLAMO_ENGINE_MPEG_DEC = 4, - GLAMO_ENGINE_LCD = 5, - GLAMO_ENGINE_CMDQ = 6, - GLAMO_ENGINE_2D = 7, - GLAMO_ENGINE_3D = 8, - GLAMO_ENGINE_MMC = 9, - GLAMO_ENGINE_MICROP0 = 10, - GLAMO_ENGINE_RISC = 11, - GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, - GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, -#if 0 - GLAMO_ENGINE_H264_DEC = 14, - GLAMO_ENGINE_RISC1 = 15, - GLAMO_ENGINE_SPI = 16, -#endif - __NUM_GLAMO_ENGINES -}; - -#endif diff --git a/target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h b/target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h deleted file mode 100644 index 5f9fab5a48..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/include/linux/glamofb.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _LINUX_GLAMOFB_H -#define _LINUX_GLAMOFB_H - -#include - -#ifdef __KERNEL__ - -struct glamo_core; -struct glamofb_handle; - -struct glamo_fb_platform_data { - int width, height; - - int num_modes; - struct fb_videomode *modes; - - struct glamo_core *core; -}; - -int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); -int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val); - -#ifdef CONFIG_MFD_GLAMO -void glamo_lcm_reset(struct platform_device *pdev, int level); -#else -#define glamo_lcm_reset(...) do {} while (0) -#endif - -#endif - -#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32) -#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32) -#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32) - -#endif diff --git a/target/linux/generic-2.6/files-2.6.30/include/linux/gpio_buttons.h b/target/linux/generic-2.6/files-2.6.30/include/linux/gpio_buttons.h deleted file mode 100644 index f5e6297258..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/include/linux/gpio_buttons.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Definitions for the GPIO buttons interface driver - * - * Copyright (C) 2007,2008 Gabor Juhos - * - * This file was based on: /include/linux/gpio_keys.h - * The original gpio_keys.h seems not to have a license. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _GPIO_BUTTONS_H_ -#define _GPIO_BUTTONS_H_ - -struct gpio_button { - int gpio; /* GPIO line number */ - int active_low; - char *desc; /* button description */ - int type; /* input event type (EV_KEY, EV_SW) */ - int code; /* input event code (KEY_*, SW_*) */ - int count; - int threshold; /* count threshold */ -}; - -struct gpio_buttons_platform_data { - struct gpio_button *buttons; - int nbuttons; /* number of buttons */ - int poll_interval; /* polling interval */ -}; - -#endif /* _GPIO_BUTTONS_H_ */ - diff --git a/target/linux/generic-2.6/files-2.6.30/include/linux/gpio_dev.h b/target/linux/generic-2.6/files-2.6.30/include/linux/gpio_dev.h deleted file mode 100644 index 3f3c9c772c..0000000000 --- a/target/linux/generic-2.6/files-2.6.30/include/linux/gpio_dev.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _GPIODEV_H__ -#define _GPIODEV_H__ - -#define IOC_GPIODEV_MAGIC 'B' -#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10) -#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11) -#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12) -#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13) -#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14) - -#endif diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c b/target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c deleted file mode 100644 index 8392fcf2d6..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * character device wrapper for generic gpio layer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA - * - * Feedback, Bugs... blogic@openwrt.org - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRVNAME "gpiodev" -#define DEVNAME "gpio" - -static int dev_major; -static unsigned int gpio_access_mask; -static struct class *gpiodev_class; - -/* Counter is 1, if the device is not opened and zero (or less) if opened. */ -static atomic_t gpio_open_cnt = ATOMIC_INIT(1); - -static int -gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg) -{ - int retval = 0; - - if (((1 << arg) & gpio_access_mask) != (1 << arg)) - { - retval = -EINVAL; - goto out; - } - - switch (cmd) - { - case GPIO_GET: - retval = gpio_get_value(arg); - break; - - case GPIO_SET: - gpio_set_value(arg, 1); - break; - - case GPIO_CLEAR: - gpio_set_value(arg, 0); - break; - - case GPIO_DIR_IN: - gpio_direction_input(arg); - break; - - case GPIO_DIR_OUT: - gpio_direction_output(arg, 0); - break; - - default: - retval = -EINVAL; - break; - } - -out: - return retval; -} - -static int -gpio_open(struct inode *inode, struct file *file) -{ - int result = 0; - unsigned int dev_minor = MINOR(inode->i_rdev); - - if (dev_minor != 0) - { - printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor); - result = -ENODEV; - goto out; - } - - /* FIXME: We should really allow multiple applications to open the device - * at the same time, as long as the apps access different IO pins. - * The generic gpio-registration functions can be used for that. - * Two new IOCTLs have to be introduced for that. Need to check userspace - * compatibility first. --mb */ - if (!atomic_dec_and_test(&gpio_open_cnt)) { - atomic_inc(&gpio_open_cnt); - printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor); - result = -EBUSY; - goto out; - } - -out: - return result; -} - -static int -gpio_close(struct inode * inode, struct file * file) -{ - smp_mb__before_atomic_inc(); - atomic_inc(&gpio_open_cnt); - - return 0; -} - -struct file_operations gpio_fops = { - ioctl: gpio_ioctl, - open: gpio_open, - release: gpio_close -}; - -static int -gpio_probe(struct platform_device *dev) -{ - int result = 0; - - dev_major = register_chrdev(0, DEVNAME, &gpio_fops); - if (!dev_major) - { - printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME); - result = -ENODEV; - goto out; - } - - gpiodev_class = class_create(THIS_MODULE, DRVNAME); - device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME); - - printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major); - - if (dev->num_resources != 1) - { - printk(KERN_ERR DRVNAME ": device may only have 1 resource\n"); - result = -ENODEV; - goto out; - } - - gpio_access_mask = dev->resource[0].start; - - printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask); -out: - return result; -} - -static int -gpio_remove(struct platform_device *dev) -{ - unregister_chrdev(dev_major, DEVNAME); - return 0; -} - -static struct -platform_driver gpio_driver = { - .probe = gpio_probe, - .remove = gpio_remove, - .driver = { - .name = "GPIODEV", - .owner = THIS_MODULE, - }, -}; - -static int __init -gpio_mod_init(void) -{ - int ret = platform_driver_register(&gpio_driver); - if (ret) - printk(KERN_INFO DRVNAME ": Error registering platfom driver!"); - - return ret; -} - -static void __exit -gpio_mod_exit(void) -{ - platform_driver_unregister(&gpio_driver); -} - -module_init (gpio_mod_init); -module_exit (gpio_mod_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("John Crispin / OpenWrt"); -MODULE_DESCRIPTION("Character device for for generic gpio api"); diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c b/target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c deleted file mode 100644 index 83a8178340..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Driver for buttons on GPIO lines not capable of generating interrupts - * - * Copyright (C) 2007,2008 Gabor Juhos - * - * This file was based on: /drivers/input/misc/cobalt_btns.c - * Copyright (C) 2007 Yoichi Yuasa - * - * also was based on: /drivers/input/keyboard/gpio_keys.c - * Copyright 2005 Phil Blundell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include - -#define DRV_NAME "gpio-buttons" -#define DRV_VERSION "0.1.1" -#define PFX DRV_NAME ": " - -struct gpio_buttons_dev { - struct input_polled_dev *poll_dev; - struct gpio_buttons_platform_data *pdata; -}; - -static void gpio_buttons_poll(struct input_polled_dev *dev) -{ - struct gpio_buttons_dev *bdev = dev->private; - struct gpio_buttons_platform_data *pdata = bdev->pdata; - struct input_dev *input = dev->input; - int i; - - for (i = 0; i < bdev->pdata->nbuttons; i++) { - struct gpio_button *button = &pdata->buttons[i]; - unsigned int type = button->type ?: EV_KEY; - int state; - - state = gpio_get_value(button->gpio) ? 1 : 0; - state ^= button->active_low; - - if (state) { - button->count++; - } else { - if (button->count >= button->threshold) { - input_event(input, type, button->code, 1); - input_sync(input); - } - button->count = 0; - } - - if (button->count == button->threshold) { - input_event(input, type, button->code, 0); - input_sync(input); - } - } -} - -static int __devinit gpio_buttons_probe(struct platform_device *pdev) -{ - struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data; - struct gpio_buttons_dev *bdev; - struct input_polled_dev *poll_dev; - struct input_dev *input; - int error, i; - - - if (!pdata) - return -ENXIO; - - bdev = kzalloc(sizeof(*bdev), GFP_KERNEL); - if (!bdev) { - printk(KERN_ERR DRV_NAME "no memory for device\n"); - return -ENOMEM; - } - - poll_dev = input_allocate_polled_device(); - if (!poll_dev) { - printk(KERN_ERR DRV_NAME "no memory for polled device\n"); - error = -ENOMEM; - goto err_free_bdev; - } - - poll_dev->private = bdev; - poll_dev->poll = gpio_buttons_poll; - poll_dev->poll_interval = pdata->poll_interval; - - input = poll_dev->input; - - input->evbit[0] = BIT(EV_KEY); - input->name = pdev->name; - input->phys = "gpio-buttons/input0"; - input->dev.parent = &pdev->dev; - - input->id.bustype = BUS_HOST; - input->id.vendor = 0x0001; - input->id.product = 0x0001; - input->id.version = 0x0100; - - for (i = 0; i < pdata->nbuttons; i++) { - struct gpio_button *button = &pdata->buttons[i]; - unsigned int gpio = button->gpio; - unsigned int type = button->type ?: EV_KEY; - - error = gpio_request(gpio, button->desc ? - button->desc : DRV_NAME); - if (error) { - printk(KERN_ERR PFX "unable to claim gpio %u, " - "error %d\n", gpio, error); - goto err_free_gpio; - } - - error = gpio_direction_input(gpio); - if (error) { - printk(KERN_ERR PFX "unable to set direction on " - "gpio %u, error %d\n", gpio, error); - goto err_free_gpio; - } - - input_set_capability(input, type, button->code); - button->count = 0; - } - - bdev->poll_dev = poll_dev; - bdev->pdata = pdata; - platform_set_drvdata(pdev, bdev); - - error = input_register_polled_device(poll_dev); - if (error) { - printk(KERN_ERR PFX "unable to register polled device, " - "error %d\n", error); - goto err_free_gpio; - } - - return 0; - -err_free_gpio: - for (i = i - 1; i >= 0; i--) - gpio_free(pdata->buttons[i].gpio); - - input_free_polled_device(poll_dev); - -err_free_bdev: - kfree(bdev); - - platform_set_drvdata(pdev, NULL); - return error; -} - -static int __devexit gpio_buttons_remove(struct platform_device *pdev) -{ - struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev); - struct gpio_buttons_platform_data *pdata = bdev->pdata; - int i; - - input_unregister_polled_device(bdev->poll_dev); - - for (i = 0; i < pdata->nbuttons; i++) - gpio_free(pdata->buttons[i].gpio); - - input_free_polled_device(bdev->poll_dev); - - kfree(bdev); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver gpio_buttons_driver = { - .probe = gpio_buttons_probe, - .remove = __devexit_p(gpio_buttons_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init gpio_buttons_init(void) -{ - printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n"); - return platform_driver_register(&gpio_buttons_driver); -} - -static void __exit gpio_buttons_exit(void) -{ - platform_driver_unregister(&gpio_buttons_driver); -} - -module_init(gpio_buttons_init); -module_exit(gpio_buttons_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs"); - diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c b/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c deleted file mode 100644 index cb47480a36..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * LED Morse Trigger - * - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on: drivers/led/ledtrig-timer.c - * Copyright 2005-2006 Openedhand Ltd. - * Author: Richard Purdie - * - * also based on the patch '[PATCH] 2.5.59 morse code panics' posted - * in the LKML by Tomas Szepe at Thu, 30 Jan 2003 - * Copyright (C) 2002 Andrew Rodland - * Copyright (C) 2003 Tomas Szepe - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "leds.h" - -#define MORSE_DELAY_BASE (HZ/2) - -#define MORSE_STATE_BLINK_START 0 -#define MORSE_STATE_BLINK_STOP 1 - -#define MORSE_DIT_LEN 1 -#define MORSE_DAH_LEN 3 -#define MORSE_SPACE_LEN 7 - -struct morse_trig_data { - unsigned long delay; - char *msg; - - unsigned char morse; - unsigned char state; - char *msgpos; - struct timer_list timer; -}; - -const unsigned char morsetable[] = { - 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */ - 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */ - 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */ - 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */ - 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */ - 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */ - 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */ - 0, 0, 0, 0, 0154 /* [\]^_ */ -}; - -static inline unsigned char tomorse(char c) { - if (c >= 'a' && c <= 'z') - c = c - 'a' + 'A'; - if (c >= '"' && c <= '_') { - return morsetable[c - '"']; - } else - return 0; -} - -static inline unsigned long dit_len(struct morse_trig_data *morse_data) -{ - return MORSE_DIT_LEN*morse_data->delay; -} - -static inline unsigned long dah_len(struct morse_trig_data *morse_data) -{ - return MORSE_DAH_LEN*morse_data->delay; -} - -static inline unsigned long space_len(struct morse_trig_data *morse_data) -{ - return MORSE_SPACE_LEN*morse_data->delay; -} - -static void morse_timer_function(unsigned long data) -{ - struct led_classdev *led_cdev = (struct led_classdev *)data; - struct morse_trig_data *morse_data = led_cdev->trigger_data; - unsigned long brightness = LED_OFF; - unsigned long delay = 0; - - if (!morse_data->msg) - goto set_led; - - switch (morse_data->state) { - case MORSE_STATE_BLINK_START: - /* Starting a new blink. We have a valid code in morse. */ - delay = (morse_data->morse & 001) ? dah_len(morse_data): - dit_len(morse_data); - brightness = LED_FULL; - morse_data->state = MORSE_STATE_BLINK_STOP; - morse_data->morse >>= 1; - break; - case MORSE_STATE_BLINK_STOP: - /* Coming off of a blink. */ - morse_data->state = MORSE_STATE_BLINK_START; - - if (morse_data->morse > 1) { - /* Not done yet, just a one-dit pause. */ - delay = dit_len(morse_data); - break; - } - - /* Get a new char, figure out how much space. */ - /* First time through */ - if (!morse_data->msgpos) - morse_data->msgpos = (char *)morse_data->msg; - - if (!*morse_data->msgpos) { - /* Repeating */ - morse_data->msgpos = (char *)morse_data->msg; - delay = space_len(morse_data); - } else { - /* Inter-letter space */ - delay = dah_len(morse_data); - } - - if (!(morse_data->morse = tomorse(*morse_data->msgpos))) { - delay = space_len(morse_data); - /* And get us back here */ - morse_data->state = MORSE_STATE_BLINK_STOP; - } - morse_data->msgpos++; - break; - } - - mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay)); - -set_led: - led_set_brightness(led_cdev, brightness); -} - -static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - sprintf(buf, "%lu\n", morse_data->delay); - - return strlen(buf) + 1; -} - -static ssize_t _morse_delay_store(struct led_classdev *led_cdev, - const char *buf, size_t size) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - char *after; - unsigned long state = simple_strtoul(buf, &after, 10); - size_t count = after - buf; - int ret = -EINVAL; - - if (*after && isspace(*after)) - count++; - - if (count == size) { - morse_data->delay = state; - mod_timer(&morse_data->timer, jiffies + 1); - ret = count; - } - - return ret; -} - -static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - if (!morse_data->msg) - sprintf(buf, "\n"); - else - sprintf(buf, "%s\n", morse_data->msg); - - return strlen(buf) + 1; -} - -static ssize_t _morse_msg_store(struct led_classdev *led_cdev, - const char *buf, size_t size) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - char *m; - - m = kmalloc(size, GFP_KERNEL); - if (!m) - return -ENOMEM; - - memcpy(m,buf,size); - m[size]='\0'; - - if (morse_data->msg) - kfree(morse_data->msg); - - morse_data->msg = m; - morse_data->msgpos = NULL; - morse_data->state = MORSE_STATE_BLINK_STOP; - - mod_timer(&morse_data->timer, jiffies + 1); - - return size; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) -static ssize_t morse_delay_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_delay_show(led_cdev, buf); -} - -static ssize_t morse_delay_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_delay_store(led_cdev, buf, size); -} - -static ssize_t morse_msg_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_msg_show(led_cdev, buf); -} - -static ssize_t morse_msg_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_msg_store(led_cdev, buf, size); -} - -static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); -static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); - -#define led_device_create_file(leddev, attr) \ - device_create_file(leddev->dev, &dev_attr_ ## attr) -#define led_device_remove_file(leddev, attr) \ - device_remove_file(leddev->dev, &dev_attr_ ## attr) - -#else -static ssize_t morse_delay_show(struct class_device *dev, char *buf) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_delay_show(led_cdev, buf); -} - -static ssize_t morse_delay_store(struct class_device *dev, const char *buf, - size_t size) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_delay_store(led_cdev, buf, size); -} - -static ssize_t morse_msg_show(struct class_device *dev, char *buf) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_msg_show(led_cdev, buf); -} - -static ssize_t morse_msg_store(struct class_device *dev, const char *buf, - size_t size) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_msg_store(led_cdev, buf, size); -} - -static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); -static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); - -#define led_device_create_file(leddev, attr) \ - class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr) -#define led_device_remove_file(leddev, attr) \ - class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr) - -#endif - -static void morse_trig_activate(struct led_classdev *led_cdev) -{ - struct morse_trig_data *morse_data; - int rc; - - morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL); - if (!morse_data) - return; - - morse_data->delay = MORSE_DELAY_BASE; - init_timer(&morse_data->timer); - morse_data->timer.function = morse_timer_function; - morse_data->timer.data = (unsigned long)led_cdev; - - rc = led_device_create_file(led_cdev, delay); - if (rc) goto err; - - rc = led_device_create_file(led_cdev, message); - if (rc) goto err_delay; - - led_cdev->trigger_data = morse_data; - - return; - -err_delay: - led_device_remove_file(led_cdev, delay); -err: - kfree(morse_data); -} - -static void morse_trig_deactivate(struct led_classdev *led_cdev) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - if (!morse_data) - return; - - led_device_remove_file(led_cdev, message); - led_device_remove_file(led_cdev, delay); - - del_timer_sync(&morse_data->timer); - if (morse_data->msg) - kfree(morse_data->msg); - - kfree(morse_data); -} - -static struct led_trigger morse_led_trigger = { - .name = "morse", - .activate = morse_trig_activate, - .deactivate = morse_trig_deactivate, -}; - -static int __init morse_trig_init(void) -{ - return led_trigger_register(&morse_led_trigger); -} - -static void __exit morse_trig_exit(void) -{ - led_trigger_unregister(&morse_led_trigger); -} - -module_init(morse_trig_init); -module_exit(morse_trig_exit); - -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION("Morse LED trigger"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c b/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c deleted file mode 100644 index 8dba8e654d..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * LED Kernel Netdev Trigger - * - * Toggles the LED to reflect the link and traffic state of a named net device - * - * Copyright 2007 Oliver Jowett - * - * Derived from ledtrig-timer.c which is: - * Copyright 2005-2006 Openedhand Ltd. - * Author: Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) -#include -#endif - -#include "leds.h" - -/* - * Configurable sysfs attributes: - * - * device_name - network device name to monitor - * - * interval - duration of LED blink, in milliseconds - * - * mode - either "none" (LED is off) or a space separated list of one or more of: - * link: LED's normal state reflects whether the link is up (has carrier) or not - * tx: LED blinks on transmitted data - * rx: LED blinks on receive data - * - * Some suggestions: - * - * Simple link status LED: - * $ echo netdev >someled/trigger - * $ echo eth0 >someled/device_name - * $ echo link >someled/mode - * - * Ethernet-style link/activity LED: - * $ echo netdev >someled/trigger - * $ echo eth0 >someled/device_name - * $ echo "link tx rx" >someled/mode - * - * Modem-style tx/rx LEDs: - * $ echo netdev >led1/trigger - * $ echo ppp0 >led1/device_name - * $ echo tx >led1/mode - * $ echo netdev >led2/trigger - * $ echo ppp0 >led2/device_name - * $ echo rx >led2/mode - * - */ - -#define MODE_LINK 1 -#define MODE_TX 2 -#define MODE_RX 4 - -struct led_netdev_data { - rwlock_t lock; - - struct timer_list timer; - struct notifier_block notifier; - - struct led_classdev *led_cdev; - struct net_device *net_dev; - - char device_name[IFNAMSIZ]; - unsigned interval; - unsigned mode; - unsigned link_up; - unsigned last_activity; -}; - -static void set_baseline_state(struct led_netdev_data *trigger_data) -{ - if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) - led_set_brightness(trigger_data->led_cdev, LED_FULL); - else - led_set_brightness(trigger_data->led_cdev, LED_OFF); - - if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up) - mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); - else - del_timer(&trigger_data->timer); -} - -static ssize_t led_device_name_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - sprintf(buf, "%s\n", trigger_data->device_name); - read_unlock(&trigger_data->lock); - - return strlen(buf) + 1; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) -extern struct net init_net; -#endif - -static ssize_t led_device_name_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - if (size < 0 || size >= IFNAMSIZ) - return -EINVAL; - - write_lock(&trigger_data->lock); - - strcpy(trigger_data->device_name, buf); - if (size > 0 && trigger_data->device_name[size-1] == '\n') - trigger_data->device_name[size-1] = 0; - - if (trigger_data->device_name[0] != 0) { - /* check for existing device to update from */ -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) - trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name); -#else - trigger_data->net_dev = dev_get_by_name(trigger_data->device_name); -#endif - if (trigger_data->net_dev != NULL) - trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0; - set_baseline_state(trigger_data); /* updates LEDs, may start timers */ - } - - write_unlock(&trigger_data->lock); - return size; -} - -static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store); - -static ssize_t led_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - - if (trigger_data->mode == 0) { - strcpy(buf, "none\n"); - } else { - if (trigger_data->mode & MODE_LINK) - strcat(buf, "link "); - if (trigger_data->mode & MODE_TX) - strcat(buf, "tx "); - if (trigger_data->mode & MODE_RX) - strcat(buf, "rx "); - strcat(buf, "\n"); - } - - read_unlock(&trigger_data->lock); - - return strlen(buf)+1; -} - -static ssize_t led_mode_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - char copybuf[1024]; - int new_mode = -1; - char *p, *token; - - /* take a copy since we don't want to trash the inbound buffer when using strsep */ - strncpy(copybuf, buf, sizeof(copybuf)); - copybuf[1023] = 0; - p = copybuf; - - while ((token = strsep(&p, " \t\n")) != NULL) { - if (!*token) - continue; - - if (new_mode == -1) - new_mode = 0; - - if (!strcmp(token, "none")) - new_mode = 0; - else if (!strcmp(token, "tx")) - new_mode |= MODE_TX; - else if (!strcmp(token, "rx")) - new_mode |= MODE_RX; - else if (!strcmp(token, "link")) - new_mode |= MODE_LINK; - else - return -EINVAL; - } - - if (new_mode == -1) - return -EINVAL; - - write_lock(&trigger_data->lock); - trigger_data->mode = new_mode; - set_baseline_state(trigger_data); - write_unlock(&trigger_data->lock); - - return size; -} - -static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store); - -static ssize_t led_interval_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval)); - read_unlock(&trigger_data->lock); - - return strlen(buf) + 1; -} - -static ssize_t led_interval_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - int ret = -EINVAL; - char *after; - unsigned long value = simple_strtoul(buf, &after, 10); - size_t count = after - buf; - - if (*after && isspace(*after)) - count++; - - /* impose some basic bounds on the timer interval */ - if (count == size && value >= 5 && value <= 10000) { - write_lock(&trigger_data->lock); - trigger_data->interval = msecs_to_jiffies(value); - set_baseline_state(trigger_data); // resets timer - write_unlock(&trigger_data->lock); - ret = count; - } - - return ret; -} - -static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store); - -static int netdev_trig_notify(struct notifier_block *nb, - unsigned long evt, - void *dv) -{ - struct net_device *dev = dv; - struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier); - - if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER) - return NOTIFY_DONE; - - write_lock(&trigger_data->lock); - - if (strcmp(dev->name, trigger_data->device_name)) - goto done; - - if (evt == NETDEV_REGISTER) { - if (trigger_data->net_dev != NULL) - dev_put(trigger_data->net_dev); - dev_hold(dev); - trigger_data->net_dev = dev; - trigger_data->link_up = 0; - goto done; - } - - if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) { - dev_put(trigger_data->net_dev); - trigger_data->net_dev = NULL; - goto done; - } - - /* UP / DOWN / CHANGE */ - - trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev)); - set_baseline_state(trigger_data); - -done: - write_unlock(&trigger_data->lock); - return NOTIFY_DONE; -} - -/* here's the real work! */ -static void netdev_trig_timer(unsigned long arg) -{ - struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg; - const struct net_device_stats *dev_stats; - unsigned new_activity; - - write_lock(&trigger_data->lock); - - if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) { - /* we don't need to do timer work, just reflect link state. */ - led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF); - goto no_restart; - } - - dev_stats = dev_get_stats(trigger_data->net_dev); - new_activity = - ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) + - ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0); - - if (trigger_data->mode & MODE_LINK) { - /* base state is ON (link present) */ - /* if there's no link, we don't get this far and the LED is off */ - - /* OFF -> ON always */ - /* ON -> OFF on activity */ - if (trigger_data->led_cdev->brightness == LED_OFF) { - led_set_brightness(trigger_data->led_cdev, LED_FULL); - } else if (trigger_data->last_activity != new_activity) { - led_set_brightness(trigger_data->led_cdev, LED_OFF); - } - } else { - /* base state is OFF */ - /* ON -> OFF always */ - /* OFF -> ON on activity */ - if (trigger_data->led_cdev->brightness == LED_FULL) { - led_set_brightness(trigger_data->led_cdev, LED_OFF); - } else if (trigger_data->last_activity != new_activity) { - led_set_brightness(trigger_data->led_cdev, LED_FULL); - } - } - - trigger_data->last_activity = new_activity; - mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); - -no_restart: - write_unlock(&trigger_data->lock); -} - -static void netdev_trig_activate(struct led_classdev *led_cdev) -{ - struct led_netdev_data *trigger_data; - int rc; - - trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); - if (!trigger_data) - return; - - rwlock_init(&trigger_data->lock); - - trigger_data->notifier.notifier_call = netdev_trig_notify; - trigger_data->notifier.priority = 10; - - setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data); - - trigger_data->led_cdev = led_cdev; - trigger_data->net_dev = NULL; - trigger_data->device_name[0] = 0; - - trigger_data->mode = 0; - trigger_data->interval = msecs_to_jiffies(50); - trigger_data->link_up = 0; - trigger_data->last_activity = 0; - - led_cdev->trigger_data = trigger_data; - - rc = device_create_file(led_cdev->dev, &dev_attr_device_name); - if (rc) - goto err_out; - rc = device_create_file(led_cdev->dev, &dev_attr_mode); - if (rc) - goto err_out_device_name; - rc = device_create_file(led_cdev->dev, &dev_attr_interval); - if (rc) - goto err_out_mode; - - register_netdevice_notifier(&trigger_data->notifier); - return; - -err_out_mode: - device_remove_file(led_cdev->dev, &dev_attr_mode); -err_out_device_name: - device_remove_file(led_cdev->dev, &dev_attr_device_name); -err_out: - led_cdev->trigger_data = NULL; - kfree(trigger_data); -} - -static void netdev_trig_deactivate(struct led_classdev *led_cdev) -{ - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - if (trigger_data) { - unregister_netdevice_notifier(&trigger_data->notifier); - - device_remove_file(led_cdev->dev, &dev_attr_device_name); - device_remove_file(led_cdev->dev, &dev_attr_mode); - device_remove_file(led_cdev->dev, &dev_attr_interval); - - write_lock(&trigger_data->lock); - - if (trigger_data->net_dev) { - dev_put(trigger_data->net_dev); - trigger_data->net_dev = NULL; - } - - write_unlock(&trigger_data->lock); - - del_timer_sync(&trigger_data->timer); - - kfree(trigger_data); - } -} - -static struct led_trigger netdev_led_trigger = { - .name = "netdev", - .activate = netdev_trig_activate, - .deactivate = netdev_trig_deactivate, -}; - -static int __init netdev_trig_init(void) -{ - return led_trigger_register(&netdev_led_trigger); -} - -static void __exit netdev_trig_exit(void) -{ - led_trigger_unregister(&netdev_led_trigger); -} - -module_init(netdev_trig_init); -module_exit(netdev_trig_exit); - -MODULE_AUTHOR("Oliver Jowett "); -MODULE_DESCRIPTION("Netdev LED trigger"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h b/target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h deleted file mode 100644 index 516d45fa6e..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __GLAMO_ENGINE_H -#define __GLAMO_ENGINE_H - -enum glamo_engine { - GLAMO_ENGINE_CAPTURE = 0, - GLAMO_ENGINE_ISP = 1, - GLAMO_ENGINE_JPEG = 2, - GLAMO_ENGINE_MPEG_ENC = 3, - GLAMO_ENGINE_MPEG_DEC = 4, - GLAMO_ENGINE_LCD = 5, - GLAMO_ENGINE_CMDQ = 6, - GLAMO_ENGINE_2D = 7, - GLAMO_ENGINE_3D = 8, - GLAMO_ENGINE_MMC = 9, - GLAMO_ENGINE_MICROP0 = 10, - GLAMO_ENGINE_RISC = 11, - GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, - GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, -#if 0 - GLAMO_ENGINE_H264_DEC = 14, - GLAMO_ENGINE_RISC1 = 15, - GLAMO_ENGINE_SPI = 16, -#endif - __NUM_GLAMO_ENGINES -}; - -#endif diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h b/target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h deleted file mode 100644 index 5f9fab5a48..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _LINUX_GLAMOFB_H -#define _LINUX_GLAMOFB_H - -#include - -#ifdef __KERNEL__ - -struct glamo_core; -struct glamofb_handle; - -struct glamo_fb_platform_data { - int width, height; - - int num_modes; - struct fb_videomode *modes; - - struct glamo_core *core; -}; - -int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); -int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val); - -#ifdef CONFIG_MFD_GLAMO -void glamo_lcm_reset(struct platform_device *pdev, int level); -#else -#define glamo_lcm_reset(...) do {} while (0) -#endif - -#endif - -#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32) -#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32) -#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32) - -#endif diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h b/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h deleted file mode 100644 index f5e6297258..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Definitions for the GPIO buttons interface driver - * - * Copyright (C) 2007,2008 Gabor Juhos - * - * This file was based on: /include/linux/gpio_keys.h - * The original gpio_keys.h seems not to have a license. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _GPIO_BUTTONS_H_ -#define _GPIO_BUTTONS_H_ - -struct gpio_button { - int gpio; /* GPIO line number */ - int active_low; - char *desc; /* button description */ - int type; /* input event type (EV_KEY, EV_SW) */ - int code; /* input event code (KEY_*, SW_*) */ - int count; - int threshold; /* count threshold */ -}; - -struct gpio_buttons_platform_data { - struct gpio_button *buttons; - int nbuttons; /* number of buttons */ - int poll_interval; /* polling interval */ -}; - -#endif /* _GPIO_BUTTONS_H_ */ - diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h b/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h deleted file mode 100644 index 3f3c9c772c..0000000000 --- a/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _GPIODEV_H__ -#define _GPIODEV_H__ - -#define IOC_GPIODEV_MAGIC 'B' -#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10) -#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11) -#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12) -#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13) -#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14) - -#endif diff --git a/target/linux/generic-2.6/files-2.6.32/drivers/char/gpio_dev.c b/target/linux/generic-2.6/files-2.6.32/drivers/char/gpio_dev.c deleted file mode 100644 index 8392fcf2d6..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/drivers/char/gpio_dev.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * character device wrapper for generic gpio layer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA - * - * Feedback, Bugs... blogic@openwrt.org - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRVNAME "gpiodev" -#define DEVNAME "gpio" - -static int dev_major; -static unsigned int gpio_access_mask; -static struct class *gpiodev_class; - -/* Counter is 1, if the device is not opened and zero (or less) if opened. */ -static atomic_t gpio_open_cnt = ATOMIC_INIT(1); - -static int -gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg) -{ - int retval = 0; - - if (((1 << arg) & gpio_access_mask) != (1 << arg)) - { - retval = -EINVAL; - goto out; - } - - switch (cmd) - { - case GPIO_GET: - retval = gpio_get_value(arg); - break; - - case GPIO_SET: - gpio_set_value(arg, 1); - break; - - case GPIO_CLEAR: - gpio_set_value(arg, 0); - break; - - case GPIO_DIR_IN: - gpio_direction_input(arg); - break; - - case GPIO_DIR_OUT: - gpio_direction_output(arg, 0); - break; - - default: - retval = -EINVAL; - break; - } - -out: - return retval; -} - -static int -gpio_open(struct inode *inode, struct file *file) -{ - int result = 0; - unsigned int dev_minor = MINOR(inode->i_rdev); - - if (dev_minor != 0) - { - printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor); - result = -ENODEV; - goto out; - } - - /* FIXME: We should really allow multiple applications to open the device - * at the same time, as long as the apps access different IO pins. - * The generic gpio-registration functions can be used for that. - * Two new IOCTLs have to be introduced for that. Need to check userspace - * compatibility first. --mb */ - if (!atomic_dec_and_test(&gpio_open_cnt)) { - atomic_inc(&gpio_open_cnt); - printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor); - result = -EBUSY; - goto out; - } - -out: - return result; -} - -static int -gpio_close(struct inode * inode, struct file * file) -{ - smp_mb__before_atomic_inc(); - atomic_inc(&gpio_open_cnt); - - return 0; -} - -struct file_operations gpio_fops = { - ioctl: gpio_ioctl, - open: gpio_open, - release: gpio_close -}; - -static int -gpio_probe(struct platform_device *dev) -{ - int result = 0; - - dev_major = register_chrdev(0, DEVNAME, &gpio_fops); - if (!dev_major) - { - printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME); - result = -ENODEV; - goto out; - } - - gpiodev_class = class_create(THIS_MODULE, DRVNAME); - device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME); - - printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major); - - if (dev->num_resources != 1) - { - printk(KERN_ERR DRVNAME ": device may only have 1 resource\n"); - result = -ENODEV; - goto out; - } - - gpio_access_mask = dev->resource[0].start; - - printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask); -out: - return result; -} - -static int -gpio_remove(struct platform_device *dev) -{ - unregister_chrdev(dev_major, DEVNAME); - return 0; -} - -static struct -platform_driver gpio_driver = { - .probe = gpio_probe, - .remove = gpio_remove, - .driver = { - .name = "GPIODEV", - .owner = THIS_MODULE, - }, -}; - -static int __init -gpio_mod_init(void) -{ - int ret = platform_driver_register(&gpio_driver); - if (ret) - printk(KERN_INFO DRVNAME ": Error registering platfom driver!"); - - return ret; -} - -static void __exit -gpio_mod_exit(void) -{ - platform_driver_unregister(&gpio_driver); -} - -module_init (gpio_mod_init); -module_exit (gpio_mod_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("John Crispin / OpenWrt"); -MODULE_DESCRIPTION("Character device for for generic gpio api"); diff --git a/target/linux/generic-2.6/files-2.6.32/drivers/input/misc/gpio_buttons.c b/target/linux/generic-2.6/files-2.6.32/drivers/input/misc/gpio_buttons.c deleted file mode 100644 index 83a8178340..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/drivers/input/misc/gpio_buttons.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Driver for buttons on GPIO lines not capable of generating interrupts - * - * Copyright (C) 2007,2008 Gabor Juhos - * - * This file was based on: /drivers/input/misc/cobalt_btns.c - * Copyright (C) 2007 Yoichi Yuasa - * - * also was based on: /drivers/input/keyboard/gpio_keys.c - * Copyright 2005 Phil Blundell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include - -#define DRV_NAME "gpio-buttons" -#define DRV_VERSION "0.1.1" -#define PFX DRV_NAME ": " - -struct gpio_buttons_dev { - struct input_polled_dev *poll_dev; - struct gpio_buttons_platform_data *pdata; -}; - -static void gpio_buttons_poll(struct input_polled_dev *dev) -{ - struct gpio_buttons_dev *bdev = dev->private; - struct gpio_buttons_platform_data *pdata = bdev->pdata; - struct input_dev *input = dev->input; - int i; - - for (i = 0; i < bdev->pdata->nbuttons; i++) { - struct gpio_button *button = &pdata->buttons[i]; - unsigned int type = button->type ?: EV_KEY; - int state; - - state = gpio_get_value(button->gpio) ? 1 : 0; - state ^= button->active_low; - - if (state) { - button->count++; - } else { - if (button->count >= button->threshold) { - input_event(input, type, button->code, 1); - input_sync(input); - } - button->count = 0; - } - - if (button->count == button->threshold) { - input_event(input, type, button->code, 0); - input_sync(input); - } - } -} - -static int __devinit gpio_buttons_probe(struct platform_device *pdev) -{ - struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data; - struct gpio_buttons_dev *bdev; - struct input_polled_dev *poll_dev; - struct input_dev *input; - int error, i; - - - if (!pdata) - return -ENXIO; - - bdev = kzalloc(sizeof(*bdev), GFP_KERNEL); - if (!bdev) { - printk(KERN_ERR DRV_NAME "no memory for device\n"); - return -ENOMEM; - } - - poll_dev = input_allocate_polled_device(); - if (!poll_dev) { - printk(KERN_ERR DRV_NAME "no memory for polled device\n"); - error = -ENOMEM; - goto err_free_bdev; - } - - poll_dev->private = bdev; - poll_dev->poll = gpio_buttons_poll; - poll_dev->poll_interval = pdata->poll_interval; - - input = poll_dev->input; - - input->evbit[0] = BIT(EV_KEY); - input->name = pdev->name; - input->phys = "gpio-buttons/input0"; - input->dev.parent = &pdev->dev; - - input->id.bustype = BUS_HOST; - input->id.vendor = 0x0001; - input->id.product = 0x0001; - input->id.version = 0x0100; - - for (i = 0; i < pdata->nbuttons; i++) { - struct gpio_button *button = &pdata->buttons[i]; - unsigned int gpio = button->gpio; - unsigned int type = button->type ?: EV_KEY; - - error = gpio_request(gpio, button->desc ? - button->desc : DRV_NAME); - if (error) { - printk(KERN_ERR PFX "unable to claim gpio %u, " - "error %d\n", gpio, error); - goto err_free_gpio; - } - - error = gpio_direction_input(gpio); - if (error) { - printk(KERN_ERR PFX "unable to set direction on " - "gpio %u, error %d\n", gpio, error); - goto err_free_gpio; - } - - input_set_capability(input, type, button->code); - button->count = 0; - } - - bdev->poll_dev = poll_dev; - bdev->pdata = pdata; - platform_set_drvdata(pdev, bdev); - - error = input_register_polled_device(poll_dev); - if (error) { - printk(KERN_ERR PFX "unable to register polled device, " - "error %d\n", error); - goto err_free_gpio; - } - - return 0; - -err_free_gpio: - for (i = i - 1; i >= 0; i--) - gpio_free(pdata->buttons[i].gpio); - - input_free_polled_device(poll_dev); - -err_free_bdev: - kfree(bdev); - - platform_set_drvdata(pdev, NULL); - return error; -} - -static int __devexit gpio_buttons_remove(struct platform_device *pdev) -{ - struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev); - struct gpio_buttons_platform_data *pdata = bdev->pdata; - int i; - - input_unregister_polled_device(bdev->poll_dev); - - for (i = 0; i < pdata->nbuttons; i++) - gpio_free(pdata->buttons[i].gpio); - - input_free_polled_device(bdev->poll_dev); - - kfree(bdev); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver gpio_buttons_driver = { - .probe = gpio_buttons_probe, - .remove = __devexit_p(gpio_buttons_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init gpio_buttons_init(void) -{ - printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n"); - return platform_driver_register(&gpio_buttons_driver); -} - -static void __exit gpio_buttons_exit(void) -{ - platform_driver_unregister(&gpio_buttons_driver); -} - -module_init(gpio_buttons_init); -module_exit(gpio_buttons_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs"); - diff --git a/target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-morse.c b/target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-morse.c deleted file mode 100644 index cb47480a36..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-morse.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * LED Morse Trigger - * - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on: drivers/led/ledtrig-timer.c - * Copyright 2005-2006 Openedhand Ltd. - * Author: Richard Purdie - * - * also based on the patch '[PATCH] 2.5.59 morse code panics' posted - * in the LKML by Tomas Szepe at Thu, 30 Jan 2003 - * Copyright (C) 2002 Andrew Rodland - * Copyright (C) 2003 Tomas Szepe - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "leds.h" - -#define MORSE_DELAY_BASE (HZ/2) - -#define MORSE_STATE_BLINK_START 0 -#define MORSE_STATE_BLINK_STOP 1 - -#define MORSE_DIT_LEN 1 -#define MORSE_DAH_LEN 3 -#define MORSE_SPACE_LEN 7 - -struct morse_trig_data { - unsigned long delay; - char *msg; - - unsigned char morse; - unsigned char state; - char *msgpos; - struct timer_list timer; -}; - -const unsigned char morsetable[] = { - 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */ - 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */ - 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */ - 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */ - 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */ - 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */ - 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */ - 0, 0, 0, 0, 0154 /* [\]^_ */ -}; - -static inline unsigned char tomorse(char c) { - if (c >= 'a' && c <= 'z') - c = c - 'a' + 'A'; - if (c >= '"' && c <= '_') { - return morsetable[c - '"']; - } else - return 0; -} - -static inline unsigned long dit_len(struct morse_trig_data *morse_data) -{ - return MORSE_DIT_LEN*morse_data->delay; -} - -static inline unsigned long dah_len(struct morse_trig_data *morse_data) -{ - return MORSE_DAH_LEN*morse_data->delay; -} - -static inline unsigned long space_len(struct morse_trig_data *morse_data) -{ - return MORSE_SPACE_LEN*morse_data->delay; -} - -static void morse_timer_function(unsigned long data) -{ - struct led_classdev *led_cdev = (struct led_classdev *)data; - struct morse_trig_data *morse_data = led_cdev->trigger_data; - unsigned long brightness = LED_OFF; - unsigned long delay = 0; - - if (!morse_data->msg) - goto set_led; - - switch (morse_data->state) { - case MORSE_STATE_BLINK_START: - /* Starting a new blink. We have a valid code in morse. */ - delay = (morse_data->morse & 001) ? dah_len(morse_data): - dit_len(morse_data); - brightness = LED_FULL; - morse_data->state = MORSE_STATE_BLINK_STOP; - morse_data->morse >>= 1; - break; - case MORSE_STATE_BLINK_STOP: - /* Coming off of a blink. */ - morse_data->state = MORSE_STATE_BLINK_START; - - if (morse_data->morse > 1) { - /* Not done yet, just a one-dit pause. */ - delay = dit_len(morse_data); - break; - } - - /* Get a new char, figure out how much space. */ - /* First time through */ - if (!morse_data->msgpos) - morse_data->msgpos = (char *)morse_data->msg; - - if (!*morse_data->msgpos) { - /* Repeating */ - morse_data->msgpos = (char *)morse_data->msg; - delay = space_len(morse_data); - } else { - /* Inter-letter space */ - delay = dah_len(morse_data); - } - - if (!(morse_data->morse = tomorse(*morse_data->msgpos))) { - delay = space_len(morse_data); - /* And get us back here */ - morse_data->state = MORSE_STATE_BLINK_STOP; - } - morse_data->msgpos++; - break; - } - - mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay)); - -set_led: - led_set_brightness(led_cdev, brightness); -} - -static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - sprintf(buf, "%lu\n", morse_data->delay); - - return strlen(buf) + 1; -} - -static ssize_t _morse_delay_store(struct led_classdev *led_cdev, - const char *buf, size_t size) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - char *after; - unsigned long state = simple_strtoul(buf, &after, 10); - size_t count = after - buf; - int ret = -EINVAL; - - if (*after && isspace(*after)) - count++; - - if (count == size) { - morse_data->delay = state; - mod_timer(&morse_data->timer, jiffies + 1); - ret = count; - } - - return ret; -} - -static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - if (!morse_data->msg) - sprintf(buf, "\n"); - else - sprintf(buf, "%s\n", morse_data->msg); - - return strlen(buf) + 1; -} - -static ssize_t _morse_msg_store(struct led_classdev *led_cdev, - const char *buf, size_t size) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - char *m; - - m = kmalloc(size, GFP_KERNEL); - if (!m) - return -ENOMEM; - - memcpy(m,buf,size); - m[size]='\0'; - - if (morse_data->msg) - kfree(morse_data->msg); - - morse_data->msg = m; - morse_data->msgpos = NULL; - morse_data->state = MORSE_STATE_BLINK_STOP; - - mod_timer(&morse_data->timer, jiffies + 1); - - return size; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) -static ssize_t morse_delay_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_delay_show(led_cdev, buf); -} - -static ssize_t morse_delay_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_delay_store(led_cdev, buf, size); -} - -static ssize_t morse_msg_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_msg_show(led_cdev, buf); -} - -static ssize_t morse_msg_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - return _morse_msg_store(led_cdev, buf, size); -} - -static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); -static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); - -#define led_device_create_file(leddev, attr) \ - device_create_file(leddev->dev, &dev_attr_ ## attr) -#define led_device_remove_file(leddev, attr) \ - device_remove_file(leddev->dev, &dev_attr_ ## attr) - -#else -static ssize_t morse_delay_show(struct class_device *dev, char *buf) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_delay_show(led_cdev, buf); -} - -static ssize_t morse_delay_store(struct class_device *dev, const char *buf, - size_t size) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_delay_store(led_cdev, buf, size); -} - -static ssize_t morse_msg_show(struct class_device *dev, char *buf) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_msg_show(led_cdev, buf); -} - -static ssize_t morse_msg_store(struct class_device *dev, const char *buf, - size_t size) -{ - struct led_classdev *led_cdev = class_get_devdata(dev); - - return _morse_msg_store(led_cdev, buf, size); -} - -static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); -static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); - -#define led_device_create_file(leddev, attr) \ - class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr) -#define led_device_remove_file(leddev, attr) \ - class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr) - -#endif - -static void morse_trig_activate(struct led_classdev *led_cdev) -{ - struct morse_trig_data *morse_data; - int rc; - - morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL); - if (!morse_data) - return; - - morse_data->delay = MORSE_DELAY_BASE; - init_timer(&morse_data->timer); - morse_data->timer.function = morse_timer_function; - morse_data->timer.data = (unsigned long)led_cdev; - - rc = led_device_create_file(led_cdev, delay); - if (rc) goto err; - - rc = led_device_create_file(led_cdev, message); - if (rc) goto err_delay; - - led_cdev->trigger_data = morse_data; - - return; - -err_delay: - led_device_remove_file(led_cdev, delay); -err: - kfree(morse_data); -} - -static void morse_trig_deactivate(struct led_classdev *led_cdev) -{ - struct morse_trig_data *morse_data = led_cdev->trigger_data; - - if (!morse_data) - return; - - led_device_remove_file(led_cdev, message); - led_device_remove_file(led_cdev, delay); - - del_timer_sync(&morse_data->timer); - if (morse_data->msg) - kfree(morse_data->msg); - - kfree(morse_data); -} - -static struct led_trigger morse_led_trigger = { - .name = "morse", - .activate = morse_trig_activate, - .deactivate = morse_trig_deactivate, -}; - -static int __init morse_trig_init(void) -{ - return led_trigger_register(&morse_led_trigger); -} - -static void __exit morse_trig_exit(void) -{ - led_trigger_unregister(&morse_led_trigger); -} - -module_init(morse_trig_init); -module_exit(morse_trig_exit); - -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION("Morse LED trigger"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-netdev.c b/target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-netdev.c deleted file mode 100644 index 8dba8e654d..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/drivers/leds/ledtrig-netdev.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * LED Kernel Netdev Trigger - * - * Toggles the LED to reflect the link and traffic state of a named net device - * - * Copyright 2007 Oliver Jowett - * - * Derived from ledtrig-timer.c which is: - * Copyright 2005-2006 Openedhand Ltd. - * Author: Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) -#include -#endif - -#include "leds.h" - -/* - * Configurable sysfs attributes: - * - * device_name - network device name to monitor - * - * interval - duration of LED blink, in milliseconds - * - * mode - either "none" (LED is off) or a space separated list of one or more of: - * link: LED's normal state reflects whether the link is up (has carrier) or not - * tx: LED blinks on transmitted data - * rx: LED blinks on receive data - * - * Some suggestions: - * - * Simple link status LED: - * $ echo netdev >someled/trigger - * $ echo eth0 >someled/device_name - * $ echo link >someled/mode - * - * Ethernet-style link/activity LED: - * $ echo netdev >someled/trigger - * $ echo eth0 >someled/device_name - * $ echo "link tx rx" >someled/mode - * - * Modem-style tx/rx LEDs: - * $ echo netdev >led1/trigger - * $ echo ppp0 >led1/device_name - * $ echo tx >led1/mode - * $ echo netdev >led2/trigger - * $ echo ppp0 >led2/device_name - * $ echo rx >led2/mode - * - */ - -#define MODE_LINK 1 -#define MODE_TX 2 -#define MODE_RX 4 - -struct led_netdev_data { - rwlock_t lock; - - struct timer_list timer; - struct notifier_block notifier; - - struct led_classdev *led_cdev; - struct net_device *net_dev; - - char device_name[IFNAMSIZ]; - unsigned interval; - unsigned mode; - unsigned link_up; - unsigned last_activity; -}; - -static void set_baseline_state(struct led_netdev_data *trigger_data) -{ - if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) - led_set_brightness(trigger_data->led_cdev, LED_FULL); - else - led_set_brightness(trigger_data->led_cdev, LED_OFF); - - if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up) - mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); - else - del_timer(&trigger_data->timer); -} - -static ssize_t led_device_name_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - sprintf(buf, "%s\n", trigger_data->device_name); - read_unlock(&trigger_data->lock); - - return strlen(buf) + 1; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) -extern struct net init_net; -#endif - -static ssize_t led_device_name_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - if (size < 0 || size >= IFNAMSIZ) - return -EINVAL; - - write_lock(&trigger_data->lock); - - strcpy(trigger_data->device_name, buf); - if (size > 0 && trigger_data->device_name[size-1] == '\n') - trigger_data->device_name[size-1] = 0; - - if (trigger_data->device_name[0] != 0) { - /* check for existing device to update from */ -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) - trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name); -#else - trigger_data->net_dev = dev_get_by_name(trigger_data->device_name); -#endif - if (trigger_data->net_dev != NULL) - trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0; - set_baseline_state(trigger_data); /* updates LEDs, may start timers */ - } - - write_unlock(&trigger_data->lock); - return size; -} - -static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store); - -static ssize_t led_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - - if (trigger_data->mode == 0) { - strcpy(buf, "none\n"); - } else { - if (trigger_data->mode & MODE_LINK) - strcat(buf, "link "); - if (trigger_data->mode & MODE_TX) - strcat(buf, "tx "); - if (trigger_data->mode & MODE_RX) - strcat(buf, "rx "); - strcat(buf, "\n"); - } - - read_unlock(&trigger_data->lock); - - return strlen(buf)+1; -} - -static ssize_t led_mode_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - char copybuf[1024]; - int new_mode = -1; - char *p, *token; - - /* take a copy since we don't want to trash the inbound buffer when using strsep */ - strncpy(copybuf, buf, sizeof(copybuf)); - copybuf[1023] = 0; - p = copybuf; - - while ((token = strsep(&p, " \t\n")) != NULL) { - if (!*token) - continue; - - if (new_mode == -1) - new_mode = 0; - - if (!strcmp(token, "none")) - new_mode = 0; - else if (!strcmp(token, "tx")) - new_mode |= MODE_TX; - else if (!strcmp(token, "rx")) - new_mode |= MODE_RX; - else if (!strcmp(token, "link")) - new_mode |= MODE_LINK; - else - return -EINVAL; - } - - if (new_mode == -1) - return -EINVAL; - - write_lock(&trigger_data->lock); - trigger_data->mode = new_mode; - set_baseline_state(trigger_data); - write_unlock(&trigger_data->lock); - - return size; -} - -static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store); - -static ssize_t led_interval_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - read_lock(&trigger_data->lock); - sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval)); - read_unlock(&trigger_data->lock); - - return strlen(buf) + 1; -} - -static ssize_t led_interval_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t size) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - int ret = -EINVAL; - char *after; - unsigned long value = simple_strtoul(buf, &after, 10); - size_t count = after - buf; - - if (*after && isspace(*after)) - count++; - - /* impose some basic bounds on the timer interval */ - if (count == size && value >= 5 && value <= 10000) { - write_lock(&trigger_data->lock); - trigger_data->interval = msecs_to_jiffies(value); - set_baseline_state(trigger_data); // resets timer - write_unlock(&trigger_data->lock); - ret = count; - } - - return ret; -} - -static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store); - -static int netdev_trig_notify(struct notifier_block *nb, - unsigned long evt, - void *dv) -{ - struct net_device *dev = dv; - struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier); - - if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER) - return NOTIFY_DONE; - - write_lock(&trigger_data->lock); - - if (strcmp(dev->name, trigger_data->device_name)) - goto done; - - if (evt == NETDEV_REGISTER) { - if (trigger_data->net_dev != NULL) - dev_put(trigger_data->net_dev); - dev_hold(dev); - trigger_data->net_dev = dev; - trigger_data->link_up = 0; - goto done; - } - - if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) { - dev_put(trigger_data->net_dev); - trigger_data->net_dev = NULL; - goto done; - } - - /* UP / DOWN / CHANGE */ - - trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev)); - set_baseline_state(trigger_data); - -done: - write_unlock(&trigger_data->lock); - return NOTIFY_DONE; -} - -/* here's the real work! */ -static void netdev_trig_timer(unsigned long arg) -{ - struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg; - const struct net_device_stats *dev_stats; - unsigned new_activity; - - write_lock(&trigger_data->lock); - - if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) { - /* we don't need to do timer work, just reflect link state. */ - led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF); - goto no_restart; - } - - dev_stats = dev_get_stats(trigger_data->net_dev); - new_activity = - ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) + - ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0); - - if (trigger_data->mode & MODE_LINK) { - /* base state is ON (link present) */ - /* if there's no link, we don't get this far and the LED is off */ - - /* OFF -> ON always */ - /* ON -> OFF on activity */ - if (trigger_data->led_cdev->brightness == LED_OFF) { - led_set_brightness(trigger_data->led_cdev, LED_FULL); - } else if (trigger_data->last_activity != new_activity) { - led_set_brightness(trigger_data->led_cdev, LED_OFF); - } - } else { - /* base state is OFF */ - /* ON -> OFF always */ - /* OFF -> ON on activity */ - if (trigger_data->led_cdev->brightness == LED_FULL) { - led_set_brightness(trigger_data->led_cdev, LED_OFF); - } else if (trigger_data->last_activity != new_activity) { - led_set_brightness(trigger_data->led_cdev, LED_FULL); - } - } - - trigger_data->last_activity = new_activity; - mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); - -no_restart: - write_unlock(&trigger_data->lock); -} - -static void netdev_trig_activate(struct led_classdev *led_cdev) -{ - struct led_netdev_data *trigger_data; - int rc; - - trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); - if (!trigger_data) - return; - - rwlock_init(&trigger_data->lock); - - trigger_data->notifier.notifier_call = netdev_trig_notify; - trigger_data->notifier.priority = 10; - - setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data); - - trigger_data->led_cdev = led_cdev; - trigger_data->net_dev = NULL; - trigger_data->device_name[0] = 0; - - trigger_data->mode = 0; - trigger_data->interval = msecs_to_jiffies(50); - trigger_data->link_up = 0; - trigger_data->last_activity = 0; - - led_cdev->trigger_data = trigger_data; - - rc = device_create_file(led_cdev->dev, &dev_attr_device_name); - if (rc) - goto err_out; - rc = device_create_file(led_cdev->dev, &dev_attr_mode); - if (rc) - goto err_out_device_name; - rc = device_create_file(led_cdev->dev, &dev_attr_interval); - if (rc) - goto err_out_mode; - - register_netdevice_notifier(&trigger_data->notifier); - return; - -err_out_mode: - device_remove_file(led_cdev->dev, &dev_attr_mode); -err_out_device_name: - device_remove_file(led_cdev->dev, &dev_attr_device_name); -err_out: - led_cdev->trigger_data = NULL; - kfree(trigger_data); -} - -static void netdev_trig_deactivate(struct led_classdev *led_cdev) -{ - struct led_netdev_data *trigger_data = led_cdev->trigger_data; - - if (trigger_data) { - unregister_netdevice_notifier(&trigger_data->notifier); - - device_remove_file(led_cdev->dev, &dev_attr_device_name); - device_remove_file(led_cdev->dev, &dev_attr_mode); - device_remove_file(led_cdev->dev, &dev_attr_interval); - - write_lock(&trigger_data->lock); - - if (trigger_data->net_dev) { - dev_put(trigger_data->net_dev); - trigger_data->net_dev = NULL; - } - - write_unlock(&trigger_data->lock); - - del_timer_sync(&trigger_data->timer); - - kfree(trigger_data); - } -} - -static struct led_trigger netdev_led_trigger = { - .name = "netdev", - .activate = netdev_trig_activate, - .deactivate = netdev_trig_deactivate, -}; - -static int __init netdev_trig_init(void) -{ - return led_trigger_register(&netdev_led_trigger); -} - -static void __exit netdev_trig_exit(void) -{ - led_trigger_unregister(&netdev_led_trigger); -} - -module_init(netdev_trig_init); -module_exit(netdev_trig_exit); - -MODULE_AUTHOR("Oliver Jowett "); -MODULE_DESCRIPTION("Netdev LED trigger"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.32/include/linux/glamo-engine.h b/target/linux/generic-2.6/files-2.6.32/include/linux/glamo-engine.h deleted file mode 100644 index 516d45fa6e..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/include/linux/glamo-engine.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __GLAMO_ENGINE_H -#define __GLAMO_ENGINE_H - -enum glamo_engine { - GLAMO_ENGINE_CAPTURE = 0, - GLAMO_ENGINE_ISP = 1, - GLAMO_ENGINE_JPEG = 2, - GLAMO_ENGINE_MPEG_ENC = 3, - GLAMO_ENGINE_MPEG_DEC = 4, - GLAMO_ENGINE_LCD = 5, - GLAMO_ENGINE_CMDQ = 6, - GLAMO_ENGINE_2D = 7, - GLAMO_ENGINE_3D = 8, - GLAMO_ENGINE_MMC = 9, - GLAMO_ENGINE_MICROP0 = 10, - GLAMO_ENGINE_RISC = 11, - GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, - GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, -#if 0 - GLAMO_ENGINE_H264_DEC = 14, - GLAMO_ENGINE_RISC1 = 15, - GLAMO_ENGINE_SPI = 16, -#endif - __NUM_GLAMO_ENGINES -}; - -#endif diff --git a/target/linux/generic-2.6/files-2.6.32/include/linux/glamofb.h b/target/linux/generic-2.6/files-2.6.32/include/linux/glamofb.h deleted file mode 100644 index 5f9fab5a48..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/include/linux/glamofb.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _LINUX_GLAMOFB_H -#define _LINUX_GLAMOFB_H - -#include - -#ifdef __KERNEL__ - -struct glamo_core; -struct glamofb_handle; - -struct glamo_fb_platform_data { - int width, height; - - int num_modes; - struct fb_videomode *modes; - - struct glamo_core *core; -}; - -int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); -int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val); - -#ifdef CONFIG_MFD_GLAMO -void glamo_lcm_reset(struct platform_device *pdev, int level); -#else -#define glamo_lcm_reset(...) do {} while (0) -#endif - -#endif - -#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32) -#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32) -#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32) - -#endif diff --git a/target/linux/generic-2.6/files-2.6.32/include/linux/gpio_buttons.h b/target/linux/generic-2.6/files-2.6.32/include/linux/gpio_buttons.h deleted file mode 100644 index f5e6297258..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/include/linux/gpio_buttons.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Definitions for the GPIO buttons interface driver - * - * Copyright (C) 2007,2008 Gabor Juhos - * - * This file was based on: /include/linux/gpio_keys.h - * The original gpio_keys.h seems not to have a license. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _GPIO_BUTTONS_H_ -#define _GPIO_BUTTONS_H_ - -struct gpio_button { - int gpio; /* GPIO line number */ - int active_low; - char *desc; /* button description */ - int type; /* input event type (EV_KEY, EV_SW) */ - int code; /* input event code (KEY_*, SW_*) */ - int count; - int threshold; /* count threshold */ -}; - -struct gpio_buttons_platform_data { - struct gpio_button *buttons; - int nbuttons; /* number of buttons */ - int poll_interval; /* polling interval */ -}; - -#endif /* _GPIO_BUTTONS_H_ */ - diff --git a/target/linux/generic-2.6/files-2.6.32/include/linux/gpio_dev.h b/target/linux/generic-2.6/files-2.6.32/include/linux/gpio_dev.h deleted file mode 100644 index 3f3c9c772c..0000000000 --- a/target/linux/generic-2.6/files-2.6.32/include/linux/gpio_dev.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _GPIODEV_H__ -#define _GPIODEV_H__ - -#define IOC_GPIODEV_MAGIC 'B' -#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10) -#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11) -#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12) -#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13) -#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14) - -#endif diff --git a/target/linux/generic-2.6/files/drivers/char/gpio_dev.c b/target/linux/generic-2.6/files/drivers/char/gpio_dev.c new file mode 100644 index 0000000000..8392fcf2d6 --- /dev/null +++ b/target/linux/generic-2.6/files/drivers/char/gpio_dev.c @@ -0,0 +1,201 @@ +/* + * character device wrapper for generic gpio layer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA + * + * Feedback, Bugs... blogic@openwrt.org + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "gpiodev" +#define DEVNAME "gpio" + +static int dev_major; +static unsigned int gpio_access_mask; +static struct class *gpiodev_class; + +/* Counter is 1, if the device is not opened and zero (or less) if opened. */ +static atomic_t gpio_open_cnt = ATOMIC_INIT(1); + +static int +gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg) +{ + int retval = 0; + + if (((1 << arg) & gpio_access_mask) != (1 << arg)) + { + retval = -EINVAL; + goto out; + } + + switch (cmd) + { + case GPIO_GET: + retval = gpio_get_value(arg); + break; + + case GPIO_SET: + gpio_set_value(arg, 1); + break; + + case GPIO_CLEAR: + gpio_set_value(arg, 0); + break; + + case GPIO_DIR_IN: + gpio_direction_input(arg); + break; + + case GPIO_DIR_OUT: + gpio_direction_output(arg, 0); + break; + + default: + retval = -EINVAL; + break; + } + +out: + return retval; +} + +static int +gpio_open(struct inode *inode, struct file *file) +{ + int result = 0; + unsigned int dev_minor = MINOR(inode->i_rdev); + + if (dev_minor != 0) + { + printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor); + result = -ENODEV; + goto out; + } + + /* FIXME: We should really allow multiple applications to open the device + * at the same time, as long as the apps access different IO pins. + * The generic gpio-registration functions can be used for that. + * Two new IOCTLs have to be introduced for that. Need to check userspace + * compatibility first. --mb */ + if (!atomic_dec_and_test(&gpio_open_cnt)) { + atomic_inc(&gpio_open_cnt); + printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor); + result = -EBUSY; + goto out; + } + +out: + return result; +} + +static int +gpio_close(struct inode * inode, struct file * file) +{ + smp_mb__before_atomic_inc(); + atomic_inc(&gpio_open_cnt); + + return 0; +} + +struct file_operations gpio_fops = { + ioctl: gpio_ioctl, + open: gpio_open, + release: gpio_close +}; + +static int +gpio_probe(struct platform_device *dev) +{ + int result = 0; + + dev_major = register_chrdev(0, DEVNAME, &gpio_fops); + if (!dev_major) + { + printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME); + result = -ENODEV; + goto out; + } + + gpiodev_class = class_create(THIS_MODULE, DRVNAME); + device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME); + + printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major); + + if (dev->num_resources != 1) + { + printk(KERN_ERR DRVNAME ": device may only have 1 resource\n"); + result = -ENODEV; + goto out; + } + + gpio_access_mask = dev->resource[0].start; + + printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask); +out: + return result; +} + +static int +gpio_remove(struct platform_device *dev) +{ + unregister_chrdev(dev_major, DEVNAME); + return 0; +} + +static struct +platform_driver gpio_driver = { + .probe = gpio_probe, + .remove = gpio_remove, + .driver = { + .name = "GPIODEV", + .owner = THIS_MODULE, + }, +}; + +static int __init +gpio_mod_init(void) +{ + int ret = platform_driver_register(&gpio_driver); + if (ret) + printk(KERN_INFO DRVNAME ": Error registering platfom driver!"); + + return ret; +} + +static void __exit +gpio_mod_exit(void) +{ + platform_driver_unregister(&gpio_driver); +} + +module_init (gpio_mod_init); +module_exit (gpio_mod_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("John Crispin / OpenWrt"); +MODULE_DESCRIPTION("Character device for for generic gpio api"); diff --git a/target/linux/generic-2.6/files/drivers/input/misc/gpio_buttons.c b/target/linux/generic-2.6/files/drivers/input/misc/gpio_buttons.c new file mode 100644 index 0000000000..83a8178340 --- /dev/null +++ b/target/linux/generic-2.6/files/drivers/input/misc/gpio_buttons.c @@ -0,0 +1,209 @@ +/* + * Driver for buttons on GPIO lines not capable of generating interrupts + * + * Copyright (C) 2007,2008 Gabor Juhos + * + * This file was based on: /drivers/input/misc/cobalt_btns.c + * Copyright (C) 2007 Yoichi Yuasa + * + * also was based on: /drivers/input/keyboard/gpio_keys.c + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include + +#define DRV_NAME "gpio-buttons" +#define DRV_VERSION "0.1.1" +#define PFX DRV_NAME ": " + +struct gpio_buttons_dev { + struct input_polled_dev *poll_dev; + struct gpio_buttons_platform_data *pdata; +}; + +static void gpio_buttons_poll(struct input_polled_dev *dev) +{ + struct gpio_buttons_dev *bdev = dev->private; + struct gpio_buttons_platform_data *pdata = bdev->pdata; + struct input_dev *input = dev->input; + int i; + + for (i = 0; i < bdev->pdata->nbuttons; i++) { + struct gpio_button *button = &pdata->buttons[i]; + unsigned int type = button->type ?: EV_KEY; + int state; + + state = gpio_get_value(button->gpio) ? 1 : 0; + state ^= button->active_low; + + if (state) { + button->count++; + } else { + if (button->count >= button->threshold) { + input_event(input, type, button->code, 1); + input_sync(input); + } + button->count = 0; + } + + if (button->count == button->threshold) { + input_event(input, type, button->code, 0); + input_sync(input); + } + } +} + +static int __devinit gpio_buttons_probe(struct platform_device *pdev) +{ + struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data; + struct gpio_buttons_dev *bdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int error, i; + + + if (!pdata) + return -ENXIO; + + bdev = kzalloc(sizeof(*bdev), GFP_KERNEL); + if (!bdev) { + printk(KERN_ERR DRV_NAME "no memory for device\n"); + return -ENOMEM; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + printk(KERN_ERR DRV_NAME "no memory for polled device\n"); + error = -ENOMEM; + goto err_free_bdev; + } + + poll_dev->private = bdev; + poll_dev->poll = gpio_buttons_poll; + poll_dev->poll_interval = pdata->poll_interval; + + input = poll_dev->input; + + input->evbit[0] = BIT(EV_KEY); + input->name = pdev->name; + input->phys = "gpio-buttons/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_button *button = &pdata->buttons[i]; + unsigned int gpio = button->gpio; + unsigned int type = button->type ?: EV_KEY; + + error = gpio_request(gpio, button->desc ? + button->desc : DRV_NAME); + if (error) { + printk(KERN_ERR PFX "unable to claim gpio %u, " + "error %d\n", gpio, error); + goto err_free_gpio; + } + + error = gpio_direction_input(gpio); + if (error) { + printk(KERN_ERR PFX "unable to set direction on " + "gpio %u, error %d\n", gpio, error); + goto err_free_gpio; + } + + input_set_capability(input, type, button->code); + button->count = 0; + } + + bdev->poll_dev = poll_dev; + bdev->pdata = pdata; + platform_set_drvdata(pdev, bdev); + + error = input_register_polled_device(poll_dev); + if (error) { + printk(KERN_ERR PFX "unable to register polled device, " + "error %d\n", error); + goto err_free_gpio; + } + + return 0; + +err_free_gpio: + for (i = i - 1; i >= 0; i--) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(poll_dev); + +err_free_bdev: + kfree(bdev); + + platform_set_drvdata(pdev, NULL); + return error; +} + +static int __devexit gpio_buttons_remove(struct platform_device *pdev) +{ + struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev); + struct gpio_buttons_platform_data *pdata = bdev->pdata; + int i; + + input_unregister_polled_device(bdev->poll_dev); + + for (i = 0; i < pdata->nbuttons; i++) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(bdev->poll_dev); + + kfree(bdev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver gpio_buttons_driver = { + .probe = gpio_buttons_probe, + .remove = __devexit_p(gpio_buttons_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_buttons_init(void) +{ + printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n"); + return platform_driver_register(&gpio_buttons_driver); +} + +static void __exit gpio_buttons_exit(void) +{ + platform_driver_unregister(&gpio_buttons_driver); +} + +module_init(gpio_buttons_init); +module_exit(gpio_buttons_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs"); + diff --git a/target/linux/generic-2.6/files/drivers/leds/ledtrig-morse.c b/target/linux/generic-2.6/files/drivers/leds/ledtrig-morse.c new file mode 100644 index 0000000000..cb47480a36 --- /dev/null +++ b/target/linux/generic-2.6/files/drivers/leds/ledtrig-morse.c @@ -0,0 +1,365 @@ +/* + * LED Morse Trigger + * + * Copyright (C) 2007 Gabor Juhos + * + * This file was based on: drivers/led/ledtrig-timer.c + * Copyright 2005-2006 Openedhand Ltd. + * Author: Richard Purdie + * + * also based on the patch '[PATCH] 2.5.59 morse code panics' posted + * in the LKML by Tomas Szepe at Thu, 30 Jan 2003 + * Copyright (C) 2002 Andrew Rodland + * Copyright (C) 2003 Tomas Szepe + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "leds.h" + +#define MORSE_DELAY_BASE (HZ/2) + +#define MORSE_STATE_BLINK_START 0 +#define MORSE_STATE_BLINK_STOP 1 + +#define MORSE_DIT_LEN 1 +#define MORSE_DAH_LEN 3 +#define MORSE_SPACE_LEN 7 + +struct morse_trig_data { + unsigned long delay; + char *msg; + + unsigned char morse; + unsigned char state; + char *msgpos; + struct timer_list timer; +}; + +const unsigned char morsetable[] = { + 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */ + 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */ + 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */ + 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */ + 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */ + 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */ + 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */ + 0, 0, 0, 0, 0154 /* [\]^_ */ +}; + +static inline unsigned char tomorse(char c) { + if (c >= 'a' && c <= 'z') + c = c - 'a' + 'A'; + if (c >= '"' && c <= '_') { + return morsetable[c - '"']; + } else + return 0; +} + +static inline unsigned long dit_len(struct morse_trig_data *morse_data) +{ + return MORSE_DIT_LEN*morse_data->delay; +} + +static inline unsigned long dah_len(struct morse_trig_data *morse_data) +{ + return MORSE_DAH_LEN*morse_data->delay; +} + +static inline unsigned long space_len(struct morse_trig_data *morse_data) +{ + return MORSE_SPACE_LEN*morse_data->delay; +} + +static void morse_timer_function(unsigned long data) +{ + struct led_classdev *led_cdev = (struct led_classdev *)data; + struct morse_trig_data *morse_data = led_cdev->trigger_data; + unsigned long brightness = LED_OFF; + unsigned long delay = 0; + + if (!morse_data->msg) + goto set_led; + + switch (morse_data->state) { + case MORSE_STATE_BLINK_START: + /* Starting a new blink. We have a valid code in morse. */ + delay = (morse_data->morse & 001) ? dah_len(morse_data): + dit_len(morse_data); + brightness = LED_FULL; + morse_data->state = MORSE_STATE_BLINK_STOP; + morse_data->morse >>= 1; + break; + case MORSE_STATE_BLINK_STOP: + /* Coming off of a blink. */ + morse_data->state = MORSE_STATE_BLINK_START; + + if (morse_data->morse > 1) { + /* Not done yet, just a one-dit pause. */ + delay = dit_len(morse_data); + break; + } + + /* Get a new char, figure out how much space. */ + /* First time through */ + if (!morse_data->msgpos) + morse_data->msgpos = (char *)morse_data->msg; + + if (!*morse_data->msgpos) { + /* Repeating */ + morse_data->msgpos = (char *)morse_data->msg; + delay = space_len(morse_data); + } else { + /* Inter-letter space */ + delay = dah_len(morse_data); + } + + if (!(morse_data->morse = tomorse(*morse_data->msgpos))) { + delay = space_len(morse_data); + /* And get us back here */ + morse_data->state = MORSE_STATE_BLINK_STOP; + } + morse_data->msgpos++; + break; + } + + mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay)); + +set_led: + led_set_brightness(led_cdev, brightness); +} + +static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + sprintf(buf, "%lu\n", morse_data->delay); + + return strlen(buf) + 1; +} + +static ssize_t _morse_delay_store(struct led_classdev *led_cdev, + const char *buf, size_t size) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + char *after; + unsigned long state = simple_strtoul(buf, &after, 10); + size_t count = after - buf; + int ret = -EINVAL; + + if (*after && isspace(*after)) + count++; + + if (count == size) { + morse_data->delay = state; + mod_timer(&morse_data->timer, jiffies + 1); + ret = count; + } + + return ret; +} + +static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + if (!morse_data->msg) + sprintf(buf, "\n"); + else + sprintf(buf, "%s\n", morse_data->msg); + + return strlen(buf) + 1; +} + +static ssize_t _morse_msg_store(struct led_classdev *led_cdev, + const char *buf, size_t size) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + char *m; + + m = kmalloc(size, GFP_KERNEL); + if (!m) + return -ENOMEM; + + memcpy(m,buf,size); + m[size]='\0'; + + if (morse_data->msg) + kfree(morse_data->msg); + + morse_data->msg = m; + morse_data->msgpos = NULL; + morse_data->state = MORSE_STATE_BLINK_STOP; + + mod_timer(&morse_data->timer, jiffies + 1); + + return size; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) +static ssize_t morse_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_delay_show(led_cdev, buf); +} + +static ssize_t morse_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_delay_store(led_cdev, buf, size); +} + +static ssize_t morse_msg_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_msg_show(led_cdev, buf); +} + +static ssize_t morse_msg_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_msg_store(led_cdev, buf, size); +} + +static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); +static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); + +#define led_device_create_file(leddev, attr) \ + device_create_file(leddev->dev, &dev_attr_ ## attr) +#define led_device_remove_file(leddev, attr) \ + device_remove_file(leddev->dev, &dev_attr_ ## attr) + +#else +static ssize_t morse_delay_show(struct class_device *dev, char *buf) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_delay_show(led_cdev, buf); +} + +static ssize_t morse_delay_store(struct class_device *dev, const char *buf, + size_t size) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_delay_store(led_cdev, buf, size); +} + +static ssize_t morse_msg_show(struct class_device *dev, char *buf) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_msg_show(led_cdev, buf); +} + +static ssize_t morse_msg_store(struct class_device *dev, const char *buf, + size_t size) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_msg_store(led_cdev, buf, size); +} + +static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); +static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); + +#define led_device_create_file(leddev, attr) \ + class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr) +#define led_device_remove_file(leddev, attr) \ + class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr) + +#endif + +static void morse_trig_activate(struct led_classdev *led_cdev) +{ + struct morse_trig_data *morse_data; + int rc; + + morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL); + if (!morse_data) + return; + + morse_data->delay = MORSE_DELAY_BASE; + init_timer(&morse_data->timer); + morse_data->timer.function = morse_timer_function; + morse_data->timer.data = (unsigned long)led_cdev; + + rc = led_device_create_file(led_cdev, delay); + if (rc) goto err; + + rc = led_device_create_file(led_cdev, message); + if (rc) goto err_delay; + + led_cdev->trigger_data = morse_data; + + return; + +err_delay: + led_device_remove_file(led_cdev, delay); +err: + kfree(morse_data); +} + +static void morse_trig_deactivate(struct led_classdev *led_cdev) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + if (!morse_data) + return; + + led_device_remove_file(led_cdev, message); + led_device_remove_file(led_cdev, delay); + + del_timer_sync(&morse_data->timer); + if (morse_data->msg) + kfree(morse_data->msg); + + kfree(morse_data); +} + +static struct led_trigger morse_led_trigger = { + .name = "morse", + .activate = morse_trig_activate, + .deactivate = morse_trig_deactivate, +}; + +static int __init morse_trig_init(void) +{ + return led_trigger_register(&morse_led_trigger); +} + +static void __exit morse_trig_exit(void) +{ + led_trigger_unregister(&morse_led_trigger); +} + +module_init(morse_trig_init); +module_exit(morse_trig_exit); + +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION("Morse LED trigger"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files/drivers/leds/ledtrig-netdev.c b/target/linux/generic-2.6/files/drivers/leds/ledtrig-netdev.c new file mode 100644 index 0000000000..8dba8e654d --- /dev/null +++ b/target/linux/generic-2.6/files/drivers/leds/ledtrig-netdev.c @@ -0,0 +1,451 @@ +/* + * LED Kernel Netdev Trigger + * + * Toggles the LED to reflect the link and traffic state of a named net device + * + * Copyright 2007 Oliver Jowett + * + * Derived from ledtrig-timer.c which is: + * Copyright 2005-2006 Openedhand Ltd. + * Author: Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) +#include +#endif + +#include "leds.h" + +/* + * Configurable sysfs attributes: + * + * device_name - network device name to monitor + * + * interval - duration of LED blink, in milliseconds + * + * mode - either "none" (LED is off) or a space separated list of one or more of: + * link: LED's normal state reflects whether the link is up (has carrier) or not + * tx: LED blinks on transmitted data + * rx: LED blinks on receive data + * + * Some suggestions: + * + * Simple link status LED: + * $ echo netdev >someled/trigger + * $ echo eth0 >someled/device_name + * $ echo link >someled/mode + * + * Ethernet-style link/activity LED: + * $ echo netdev >someled/trigger + * $ echo eth0 >someled/device_name + * $ echo "link tx rx" >someled/mode + * + * Modem-style tx/rx LEDs: + * $ echo netdev >led1/trigger + * $ echo ppp0 >led1/device_name + * $ echo tx >led1/mode + * $ echo netdev >led2/trigger + * $ echo ppp0 >led2/device_name + * $ echo rx >led2/mode + * + */ + +#define MODE_LINK 1 +#define MODE_TX 2 +#define MODE_RX 4 + +struct led_netdev_data { + rwlock_t lock; + + struct timer_list timer; + struct notifier_block notifier; + + struct led_classdev *led_cdev; + struct net_device *net_dev; + + char device_name[IFNAMSIZ]; + unsigned interval; + unsigned mode; + unsigned link_up; + unsigned last_activity; +}; + +static void set_baseline_state(struct led_netdev_data *trigger_data) +{ + if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) + led_set_brightness(trigger_data->led_cdev, LED_FULL); + else + led_set_brightness(trigger_data->led_cdev, LED_OFF); + + if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up) + mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); + else + del_timer(&trigger_data->timer); +} + +static ssize_t led_device_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + sprintf(buf, "%s\n", trigger_data->device_name); + read_unlock(&trigger_data->lock); + + return strlen(buf) + 1; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +extern struct net init_net; +#endif + +static ssize_t led_device_name_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + if (size < 0 || size >= IFNAMSIZ) + return -EINVAL; + + write_lock(&trigger_data->lock); + + strcpy(trigger_data->device_name, buf); + if (size > 0 && trigger_data->device_name[size-1] == '\n') + trigger_data->device_name[size-1] = 0; + + if (trigger_data->device_name[0] != 0) { + /* check for existing device to update from */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) + trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name); +#else + trigger_data->net_dev = dev_get_by_name(trigger_data->device_name); +#endif + if (trigger_data->net_dev != NULL) + trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0; + set_baseline_state(trigger_data); /* updates LEDs, may start timers */ + } + + write_unlock(&trigger_data->lock); + return size; +} + +static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store); + +static ssize_t led_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + + if (trigger_data->mode == 0) { + strcpy(buf, "none\n"); + } else { + if (trigger_data->mode & MODE_LINK) + strcat(buf, "link "); + if (trigger_data->mode & MODE_TX) + strcat(buf, "tx "); + if (trigger_data->mode & MODE_RX) + strcat(buf, "rx "); + strcat(buf, "\n"); + } + + read_unlock(&trigger_data->lock); + + return strlen(buf)+1; +} + +static ssize_t led_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + char copybuf[1024]; + int new_mode = -1; + char *p, *token; + + /* take a copy since we don't want to trash the inbound buffer when using strsep */ + strncpy(copybuf, buf, sizeof(copybuf)); + copybuf[1023] = 0; + p = copybuf; + + while ((token = strsep(&p, " \t\n")) != NULL) { + if (!*token) + continue; + + if (new_mode == -1) + new_mode = 0; + + if (!strcmp(token, "none")) + new_mode = 0; + else if (!strcmp(token, "tx")) + new_mode |= MODE_TX; + else if (!strcmp(token, "rx")) + new_mode |= MODE_RX; + else if (!strcmp(token, "link")) + new_mode |= MODE_LINK; + else + return -EINVAL; + } + + if (new_mode == -1) + return -EINVAL; + + write_lock(&trigger_data->lock); + trigger_data->mode = new_mode; + set_baseline_state(trigger_data); + write_unlock(&trigger_data->lock); + + return size; +} + +static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store); + +static ssize_t led_interval_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval)); + read_unlock(&trigger_data->lock); + + return strlen(buf) + 1; +} + +static ssize_t led_interval_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + int ret = -EINVAL; + char *after; + unsigned long value = simple_strtoul(buf, &after, 10); + size_t count = after - buf; + + if (*after && isspace(*after)) + count++; + + /* impose some basic bounds on the timer interval */ + if (count == size && value >= 5 && value <= 10000) { + write_lock(&trigger_data->lock); + trigger_data->interval = msecs_to_jiffies(value); + set_baseline_state(trigger_data); // resets timer + write_unlock(&trigger_data->lock); + ret = count; + } + + return ret; +} + +static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store); + +static int netdev_trig_notify(struct notifier_block *nb, + unsigned long evt, + void *dv) +{ + struct net_device *dev = dv; + struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier); + + if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER) + return NOTIFY_DONE; + + write_lock(&trigger_data->lock); + + if (strcmp(dev->name, trigger_data->device_name)) + goto done; + + if (evt == NETDEV_REGISTER) { + if (trigger_data->net_dev != NULL) + dev_put(trigger_data->net_dev); + dev_hold(dev); + trigger_data->net_dev = dev; + trigger_data->link_up = 0; + goto done; + } + + if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) { + dev_put(trigger_data->net_dev); + trigger_data->net_dev = NULL; + goto done; + } + + /* UP / DOWN / CHANGE */ + + trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev)); + set_baseline_state(trigger_data); + +done: + write_unlock(&trigger_data->lock); + return NOTIFY_DONE; +} + +/* here's the real work! */ +static void netdev_trig_timer(unsigned long arg) +{ + struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg; + const struct net_device_stats *dev_stats; + unsigned new_activity; + + write_lock(&trigger_data->lock); + + if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) { + /* we don't need to do timer work, just reflect link state. */ + led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF); + goto no_restart; + } + + dev_stats = dev_get_stats(trigger_data->net_dev); + new_activity = + ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) + + ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0); + + if (trigger_data->mode & MODE_LINK) { + /* base state is ON (link present) */ + /* if there's no link, we don't get this far and the LED is off */ + + /* OFF -> ON always */ + /* ON -> OFF on activity */ + if (trigger_data->led_cdev->brightness == LED_OFF) { + led_set_brightness(trigger_data->led_cdev, LED_FULL); + } else if (trigger_data->last_activity != new_activity) { + led_set_brightness(trigger_data->led_cdev, LED_OFF); + } + } else { + /* base state is OFF */ + /* ON -> OFF always */ + /* OFF -> ON on activity */ + if (trigger_data->led_cdev->brightness == LED_FULL) { + led_set_brightness(trigger_data->led_cdev, LED_OFF); + } else if (trigger_data->last_activity != new_activity) { + led_set_brightness(trigger_data->led_cdev, LED_FULL); + } + } + + trigger_data->last_activity = new_activity; + mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); + +no_restart: + write_unlock(&trigger_data->lock); +} + +static void netdev_trig_activate(struct led_classdev *led_cdev) +{ + struct led_netdev_data *trigger_data; + int rc; + + trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); + if (!trigger_data) + return; + + rwlock_init(&trigger_data->lock); + + trigger_data->notifier.notifier_call = netdev_trig_notify; + trigger_data->notifier.priority = 10; + + setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data); + + trigger_data->led_cdev = led_cdev; + trigger_data->net_dev = NULL; + trigger_data->device_name[0] = 0; + + trigger_data->mode = 0; + trigger_data->interval = msecs_to_jiffies(50); + trigger_data->link_up = 0; + trigger_data->last_activity = 0; + + led_cdev->trigger_data = trigger_data; + + rc = device_create_file(led_cdev->dev, &dev_attr_device_name); + if (rc) + goto err_out; + rc = device_create_file(led_cdev->dev, &dev_attr_mode); + if (rc) + goto err_out_device_name; + rc = device_create_file(led_cdev->dev, &dev_attr_interval); + if (rc) + goto err_out_mode; + + register_netdevice_notifier(&trigger_data->notifier); + return; + +err_out_mode: + device_remove_file(led_cdev->dev, &dev_attr_mode); +err_out_device_name: + device_remove_file(led_cdev->dev, &dev_attr_device_name); +err_out: + led_cdev->trigger_data = NULL; + kfree(trigger_data); +} + +static void netdev_trig_deactivate(struct led_classdev *led_cdev) +{ + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + if (trigger_data) { + unregister_netdevice_notifier(&trigger_data->notifier); + + device_remove_file(led_cdev->dev, &dev_attr_device_name); + device_remove_file(led_cdev->dev, &dev_attr_mode); + device_remove_file(led_cdev->dev, &dev_attr_interval); + + write_lock(&trigger_data->lock); + + if (trigger_data->net_dev) { + dev_put(trigger_data->net_dev); + trigger_data->net_dev = NULL; + } + + write_unlock(&trigger_data->lock); + + del_timer_sync(&trigger_data->timer); + + kfree(trigger_data); + } +} + +static struct led_trigger netdev_led_trigger = { + .name = "netdev", + .activate = netdev_trig_activate, + .deactivate = netdev_trig_deactivate, +}; + +static int __init netdev_trig_init(void) +{ + return led_trigger_register(&netdev_led_trigger); +} + +static void __exit netdev_trig_exit(void) +{ + led_trigger_unregister(&netdev_led_trigger); +} + +module_init(netdev_trig_init); +module_exit(netdev_trig_exit); + +MODULE_AUTHOR("Oliver Jowett "); +MODULE_DESCRIPTION("Netdev LED trigger"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files/include/linux/glamo-engine.h b/target/linux/generic-2.6/files/include/linux/glamo-engine.h new file mode 100644 index 0000000000..516d45fa6e --- /dev/null +++ b/target/linux/generic-2.6/files/include/linux/glamo-engine.h @@ -0,0 +1,27 @@ +#ifndef __GLAMO_ENGINE_H +#define __GLAMO_ENGINE_H + +enum glamo_engine { + GLAMO_ENGINE_CAPTURE = 0, + GLAMO_ENGINE_ISP = 1, + GLAMO_ENGINE_JPEG = 2, + GLAMO_ENGINE_MPEG_ENC = 3, + GLAMO_ENGINE_MPEG_DEC = 4, + GLAMO_ENGINE_LCD = 5, + GLAMO_ENGINE_CMDQ = 6, + GLAMO_ENGINE_2D = 7, + GLAMO_ENGINE_3D = 8, + GLAMO_ENGINE_MMC = 9, + GLAMO_ENGINE_MICROP0 = 10, + GLAMO_ENGINE_RISC = 11, + GLAMO_ENGINE_MICROP1_MPEG_ENC = 12, + GLAMO_ENGINE_MICROP1_MPEG_DEC = 13, +#if 0 + GLAMO_ENGINE_H264_DEC = 14, + GLAMO_ENGINE_RISC1 = 15, + GLAMO_ENGINE_SPI = 16, +#endif + __NUM_GLAMO_ENGINES +}; + +#endif diff --git a/target/linux/generic-2.6/files/include/linux/glamofb.h b/target/linux/generic-2.6/files/include/linux/glamofb.h new file mode 100644 index 0000000000..5f9fab5a48 --- /dev/null +++ b/target/linux/generic-2.6/files/include/linux/glamofb.h @@ -0,0 +1,35 @@ +#ifndef _LINUX_GLAMOFB_H +#define _LINUX_GLAMOFB_H + +#include + +#ifdef __KERNEL__ + +struct glamo_core; +struct glamofb_handle; + +struct glamo_fb_platform_data { + int width, height; + + int num_modes; + struct fb_videomode *modes; + + struct glamo_core *core; +}; + +int glamofb_cmd_mode(struct glamofb_handle *gfb, int on); +int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val); + +#ifdef CONFIG_MFD_GLAMO +void glamo_lcm_reset(struct platform_device *pdev, int level); +#else +#define glamo_lcm_reset(...) do {} while (0) +#endif + +#endif + +#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32) +#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32) +#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32) + +#endif diff --git a/target/linux/generic-2.6/files/include/linux/gpio_buttons.h b/target/linux/generic-2.6/files/include/linux/gpio_buttons.h new file mode 100644 index 0000000000..f5e6297258 --- /dev/null +++ b/target/linux/generic-2.6/files/include/linux/gpio_buttons.h @@ -0,0 +1,35 @@ +/* + * Definitions for the GPIO buttons interface driver + * + * Copyright (C) 2007,2008 Gabor Juhos + * + * This file was based on: /include/linux/gpio_keys.h + * The original gpio_keys.h seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _GPIO_BUTTONS_H_ +#define _GPIO_BUTTONS_H_ + +struct gpio_button { + int gpio; /* GPIO line number */ + int active_low; + char *desc; /* button description */ + int type; /* input event type (EV_KEY, EV_SW) */ + int code; /* input event code (KEY_*, SW_*) */ + int count; + int threshold; /* count threshold */ +}; + +struct gpio_buttons_platform_data { + struct gpio_button *buttons; + int nbuttons; /* number of buttons */ + int poll_interval; /* polling interval */ +}; + +#endif /* _GPIO_BUTTONS_H_ */ + diff --git a/target/linux/generic-2.6/files/include/linux/gpio_dev.h b/target/linux/generic-2.6/files/include/linux/gpio_dev.h new file mode 100644 index 0000000000..3f3c9c772c --- /dev/null +++ b/target/linux/generic-2.6/files/include/linux/gpio_dev.h @@ -0,0 +1,11 @@ +#ifndef _GPIODEV_H__ +#define _GPIODEV_H__ + +#define IOC_GPIODEV_MAGIC 'B' +#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10) +#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11) +#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12) +#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13) +#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14) + +#endif -- cgit v1.2.3