From cf8f985dfcea8bc0e0728645f643d6c8f71792b7 Mon Sep 17 00:00:00 2001 From: hauke Date: Sat, 16 Feb 2013 20:28:24 +0000 Subject: brcm47xx: add initial support for kernel 3.8 This contains the following new bigger changes: * new partition parser which still could lake some features or have bugs * new nand flash driver * using physmap-flash flash driver for parallel flash * some changes to the serial flash driver With these changes OpenWrt starts using more of the mainline flash drivers. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35632 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../base-files/etc/uci-defaults/09_fix_crc | 14 + target/linux/brcm47xx/config-3.8 | 156 ++ ...part-simplify-size-calculation-to-one-loo.patch | 20 + ...7xxpart-register-extra-firmware-partition.patch | 41 + ...7xxpart-add-support-for-other-erase-sizes.patch | 18 + ...xxpart-improve-probing-of-nvram-partition.patch | 61 + .../024-mtd-bcm47xxpart-get-nvram.patch | 34 + ...sflash-add-own-struct-for-abstrating-bus-.patch | 123 ++ ...m47xxsflash-write-number-of-written-bytes.patch | 10 + ...47xxsflash-register-this-as-normal-driver.patch | 19 + ...sflash-adjust-names-of-bus-specific-funct.patch | 45 + .../041-mtd-bcm47xxnflash-fix-message.patch | 12 + ...47xxnflash-register-this-as-normal-driver.patch | 23 + ...nflash-use-pr_fmt-for-module-prefix-in-me.patch | 50 + .../052-mtd-add-serial-flash-driver.patch | 345 ++++ .../060-ssb-add-serial-flash-driver.patch | 372 ++++ ...ma-add-functions-to-write-to-serial-flash.patch | 300 +++ .../080-MIPS-BCM47XX-rewrite-nvram-probing.patch | 472 +++++ ...S-BCM47xx-Setup-and-register-serial-early.patch | 69 + .../116-MIPS-BCM47xx-Remove-CFE-console.patch | 141 ++ .../linux/brcm47xx/patches-3.8/119-fix-boot.patch | 17 + .../linux/brcm47xx/patches-3.8/150-cpu_fixes.patch | 368 ++++ .../brcm47xx/patches-3.8/160-kmap_coherent.patch | 77 + .../brcm47xx/patches-3.8/170-fix-74k-cpu.patch | 12 + ...-MIPS-BCM47XX-use-fallback-for-some-board.patch | 17 + ...BCM47XX-trim-the-nvram-values-for-parsing.patch | 29 + .../brcm47xx/patches-3.8/210-b44_phy_fix.patch | 54 + .../patches-3.8/211-b44_timeout_spam.patch | 15 + .../241-bcma-broadcom-2011-sdk-updates.patch | 10 + .../260-MIPS-BCM47XX-add-board-detection.patch | 322 ++++ ...-BCM47XX-print-board-name-in-proc-cpuinfo.patch | 39 + ...0-ssb-fix-unaligned-access-to-mac-address.patch | 18 + .../280-activate_ssb_support_in_usb.patch | 25 + .../brcm47xx/patches-3.8/300-fork_cacheflush.patch | 11 + .../brcm47xx/patches-3.8/310-no_highpage.patch | 66 + .../brcm47xx/patches-3.8/400-arch-bcm47xx.patch | 177 ++ ...X-fix-time-for-WL520G-and-other-200-MHz-C.patch | 44 + ...cm47xx_wdt.c-convert-to-watchdog-core-api.patch | 258 +++ ...atchdog-bcm47xx_wdt.c-use-platform-device.patch | 283 +++ ...watchdog-bcm47xx_wdt.c-rename-ops-methods.patch | 99 + ...-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch | 26 + ...544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch | 110 ++ .../brcm47xx/patches-3.8/610-pci_ide_fix.patch | 14 + .../700-ssb-gigabit-ethernet-driver.patch | 387 ++++ .../brcm47xx/patches-3.8/720-eth-backport.patch | 94 + target/linux/brcm47xx/patches-3.8/750-bgmac.patch | 1978 ++++++++++++++++++++ .../brcm47xx/patches-3.8/760-bgmac-fixes.patch | 190 ++ .../patches-3.8/812-disable_wgt634u_crap.patch | 184 ++ .../patches-3.8/820-wgt634u-nvram-fix.patch | 306 +++ .../brcm47xx/patches-3.8/920-cache-wround.patch | 138 ++ .../brcm47xx/patches-3.8/940-bcm47xx-yenta.patch | 46 + .../patches-3.8/976-ssb_increase_pci_delay.patch | 11 + .../980-wnr834b_no_cardbus_invariant.patch | 13 + .../brcm47xx/patches-3.8/999-wl_exports.patch | 22 + .../linux/generic/patches-3.8/020-ssb_update.patch | 365 ++++ .../generic/patches-3.8/025-bcma_backport.patch | 659 +++++++ 56 files changed, 8809 insertions(+) create mode 100644 target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc create mode 100644 target/linux/brcm47xx/config-3.8 create mode 100644 target/linux/brcm47xx/patches-3.8/020-mtd-bcm47xxpart-simplify-size-calculation-to-one-loo.patch create mode 100644 target/linux/brcm47xx/patches-3.8/021-mtd-bcm47xxpart-register-extra-firmware-partition.patch create mode 100644 target/linux/brcm47xx/patches-3.8/022-mtd-bcm47xxpart-add-support-for-other-erase-sizes.patch create mode 100644 target/linux/brcm47xx/patches-3.8/023-mtd-bcm47xxpart-improve-probing-of-nvram-partition.patch create mode 100644 target/linux/brcm47xx/patches-3.8/024-mtd-bcm47xxpart-get-nvram.patch create mode 100644 target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch create mode 100644 target/linux/brcm47xx/patches-3.8/031-mtd-bcm47xxsflash-write-number-of-written-bytes.patch create mode 100644 target/linux/brcm47xx/patches-3.8/032-mtd-bcm47xxsflash-register-this-as-normal-driver.patch create mode 100644 target/linux/brcm47xx/patches-3.8/033-mtd-bcm47xxsflash-adjust-names-of-bus-specific-funct.patch create mode 100644 target/linux/brcm47xx/patches-3.8/041-mtd-bcm47xxnflash-fix-message.patch create mode 100644 target/linux/brcm47xx/patches-3.8/042-mtd-bcm47xxnflash-register-this-as-normal-driver.patch create mode 100644 target/linux/brcm47xx/patches-3.8/043-mtd-bcm47xxnflash-use-pr_fmt-for-module-prefix-in-me.patch create mode 100644 target/linux/brcm47xx/patches-3.8/052-mtd-add-serial-flash-driver.patch create mode 100644 target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch create mode 100644 target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch create mode 100644 target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch create mode 100644 target/linux/brcm47xx/patches-3.8/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch create mode 100644 target/linux/brcm47xx/patches-3.8/116-MIPS-BCM47xx-Remove-CFE-console.patch create mode 100644 target/linux/brcm47xx/patches-3.8/119-fix-boot.patch create mode 100644 target/linux/brcm47xx/patches-3.8/150-cpu_fixes.patch create mode 100644 target/linux/brcm47xx/patches-3.8/160-kmap_coherent.patch create mode 100644 target/linux/brcm47xx/patches-3.8/170-fix-74k-cpu.patch create mode 100644 target/linux/brcm47xx/patches-3.8/200-MIPS-BCM47XX-use-fallback-for-some-board.patch create mode 100644 target/linux/brcm47xx/patches-3.8/201-MIPS-BCM47XX-trim-the-nvram-values-for-parsing.patch create mode 100644 target/linux/brcm47xx/patches-3.8/210-b44_phy_fix.patch create mode 100644 target/linux/brcm47xx/patches-3.8/211-b44_timeout_spam.patch create mode 100644 target/linux/brcm47xx/patches-3.8/241-bcma-broadcom-2011-sdk-updates.patch create mode 100644 target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch create mode 100644 target/linux/brcm47xx/patches-3.8/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch create mode 100644 target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch create mode 100644 target/linux/brcm47xx/patches-3.8/280-activate_ssb_support_in_usb.patch create mode 100644 target/linux/brcm47xx/patches-3.8/300-fork_cacheflush.patch create mode 100644 target/linux/brcm47xx/patches-3.8/310-no_highpage.patch create mode 100644 target/linux/brcm47xx/patches-3.8/400-arch-bcm47xx.patch create mode 100644 target/linux/brcm47xx/patches-3.8/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch create mode 100644 target/linux/brcm47xx/patches-3.8/540-watchdog-bcm47xx_wdt.c-convert-to-watchdog-core-api.patch create mode 100644 target/linux/brcm47xx/patches-3.8/541-watchdog-bcm47xx_wdt.c-use-platform-device.patch create mode 100644 target/linux/brcm47xx/patches-3.8/542-watchdog-bcm47xx_wdt.c-rename-ops-methods.patch create mode 100644 target/linux/brcm47xx/patches-3.8/543-watchdog-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch create mode 100644 target/linux/brcm47xx/patches-3.8/544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch create mode 100644 target/linux/brcm47xx/patches-3.8/610-pci_ide_fix.patch create mode 100644 target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch create mode 100644 target/linux/brcm47xx/patches-3.8/720-eth-backport.patch create mode 100644 target/linux/brcm47xx/patches-3.8/750-bgmac.patch create mode 100644 target/linux/brcm47xx/patches-3.8/760-bgmac-fixes.patch create mode 100644 target/linux/brcm47xx/patches-3.8/812-disable_wgt634u_crap.patch create mode 100644 target/linux/brcm47xx/patches-3.8/820-wgt634u-nvram-fix.patch create mode 100644 target/linux/brcm47xx/patches-3.8/920-cache-wround.patch create mode 100644 target/linux/brcm47xx/patches-3.8/940-bcm47xx-yenta.patch create mode 100644 target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch create mode 100644 target/linux/brcm47xx/patches-3.8/980-wnr834b_no_cardbus_invariant.patch create mode 100644 target/linux/brcm47xx/patches-3.8/999-wl_exports.patch create mode 100644 target/linux/generic/patches-3.8/020-ssb_update.patch create mode 100644 target/linux/generic/patches-3.8/025-bcma_backport.patch diff --git a/target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc new file mode 100644 index 0000000000..981d114b35 --- /dev/null +++ b/target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc @@ -0,0 +1,14 @@ +#!/bin/sh +# +# Copyright (C) 2007 OpenWrt.org +# +# + +do_fixcrc() { + mtd fixtrx firmware +} + +case `uname -r` in + 3.8* | 3.9* ) do_fixcrc;; +esac + diff --git a/target/linux/brcm47xx/config-3.8 b/target/linux/brcm47xx/config-3.8 new file mode 100644 index 0000000000..177c271cfb --- /dev/null +++ b/target/linux/brcm47xx/config-3.8 @@ -0,0 +1,156 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_ARPD is not set +CONFIG_BCM47XX=y +CONFIG_BCM47XX_BCMA=y +CONFIG_BCM47XX_SSB=y +CONFIG_BCM47XX_WDT=y +CONFIG_BCMA=y +CONFIG_BCMA_BLOCKIO=y +CONFIG_BCMA_DEBUG=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y +CONFIG_BCMA_DRIVER_MIPS=y +CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y +CONFIG_BCMA_HOST_PCI=y +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_SOC=y +CONFIG_BCMA_NFLASH=y +CONFIG_BCMA_SFLASH=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CMDLINE="noinitrd console=ttyS0,115200" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +CONFIG_CPU_MIPSR1=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_FW_CFE=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IRQ_CPU=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_SEAD3 is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_BCM47XXSFLASH=y +CONFIG_MTD_BCM47XX_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_BCM47XXNFLASH=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_SM_COMMON is not set +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NO_EXCEPT_FILL=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERCPU_RWSEM=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_RSA is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SSB=y +CONFIG_SSB_B43_PCI_BRIDGE=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_DEBUG=y +CONFIG_SSB_DRIVER_EXTIF=y +CONFIG_SSB_DRIVER_GIGE=y +CONFIG_SSB_DRIVER_GPIO=y +CONFIG_SSB_DRIVER_MIPS=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_EMBEDDED=y +CONFIG_SSB_PCICORE_HOSTMODE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_SERIAL=y +CONFIG_SSB_SFLASH=y +CONFIG_SSB_SPROM=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UIDGID_CONVERTED=y +CONFIG_USB_ARCH_HAS_XHCI=y +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_SSB is not set +CONFIG_USB_SUPPORT=y +CONFIG_WATCHDOG_CORE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm47xx/patches-3.8/020-mtd-bcm47xxpart-simplify-size-calculation-to-one-loo.patch b/target/linux/brcm47xx/patches-3.8/020-mtd-bcm47xxpart-simplify-size-calculation-to-one-loo.patch new file mode 100644 index 0000000000..88771d9840 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/020-mtd-bcm47xxpart-simplify-size-calculation-to-one-loo.patch @@ -0,0 +1,20 @@ +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -169,11 +169,12 @@ static int bcm47xxpart_parse(struct mtd_ + * Assume that partitions end at the beginning of the one they are + * followed by. + */ +- for (i = 0; i < curr_part - 1; i++) +- parts[i].size = parts[i + 1].offset - parts[i].offset; +- if (curr_part > 0) +- parts[curr_part - 1].size = +- master->size - parts[curr_part - 1].offset; ++ for (i = 0; i < curr_part; i++) { ++ u64 next_part_offset = (i < curr_part - 1) ? ++ parts[i + 1].offset : master->size; ++ ++ parts[i].size = next_part_offset - parts[i].offset; ++ } + + *pparts = parts; + return curr_part; diff --git a/target/linux/brcm47xx/patches-3.8/021-mtd-bcm47xxpart-register-extra-firmware-partition.patch b/target/linux/brcm47xx/patches-3.8/021-mtd-bcm47xxpart-register-extra-firmware-partition.patch new file mode 100644 index 0000000000..c5399f24c4 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/021-mtd-bcm47xxpart-register-extra-firmware-partition.patch @@ -0,0 +1,41 @@ +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -61,6 +61,8 @@ static int bcm47xxpart_parse(struct mtd_ + uint32_t offset; + uint32_t blocksize = 0x10000; + struct trx_header *trx; ++ int trx_part = -1; ++ int last_trx_part = -1; + + /* Alloc */ + parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, +@@ -131,6 +133,10 @@ static int bcm47xxpart_parse(struct mtd_ + if (buf[0x000 / 4] == TRX_MAGIC) { + trx = (struct trx_header *)buf; + ++ trx_part = curr_part; ++ bcm47xxpart_add_part(&parts[curr_part++], "firmware", ++ offset, 0); ++ + i = 0; + /* We have LZMA loader if offset[2] points to sth */ + if (trx->offset[2]) { +@@ -154,6 +160,8 @@ static int bcm47xxpart_parse(struct mtd_ + offset + trx->offset[i], 0); + i++; + ++ last_trx_part = curr_part - 1; ++ + /* + * We have whole TRX scanned, skip to the next part. Use + * roundown (not roundup), as the loop will increase +@@ -174,6 +182,9 @@ static int bcm47xxpart_parse(struct mtd_ + parts[i + 1].offset : master->size; + + parts[i].size = next_part_offset - parts[i].offset; ++ if (i == last_trx_part && trx_part >= 0) ++ parts[trx_part].size = next_part_offset - ++ parts[trx_part].offset; + } + + *pparts = parts; diff --git a/target/linux/brcm47xx/patches-3.8/022-mtd-bcm47xxpart-add-support-for-other-erase-sizes.patch b/target/linux/brcm47xx/patches-3.8/022-mtd-bcm47xxpart-add-support-for-other-erase-sizes.patch new file mode 100644 index 0000000000..4a89de1753 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/022-mtd-bcm47xxpart-add-support-for-other-erase-sizes.patch @@ -0,0 +1,18 @@ +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -59,11 +59,14 @@ static int bcm47xxpart_parse(struct mtd_ + uint32_t *buf; + size_t bytes_read; + uint32_t offset; +- uint32_t blocksize = 0x10000; ++ uint32_t blocksize = master->erasesize; + struct trx_header *trx; + int trx_part = -1; + int last_trx_part = -1; + ++ if (blocksize <= 0x10000) ++ blocksize = 0x10000; ++ + /* Alloc */ + parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, + GFP_KERNEL); diff --git a/target/linux/brcm47xx/patches-3.8/023-mtd-bcm47xxpart-improve-probing-of-nvram-partition.patch b/target/linux/brcm47xx/patches-3.8/023-mtd-bcm47xxpart-improve-probing-of-nvram-partition.patch new file mode 100644 index 0000000000..b1115326f4 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/023-mtd-bcm47xxpart-improve-probing-of-nvram-partition.patch @@ -0,0 +1,61 @@ +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -19,12 +19,6 @@ + /* 10 parts were found on sflash on Netgear WNDR4500 */ + #define BCM47XXPART_MAX_PARTS 12 + +-/* +- * Amount of bytes we read when analyzing each block of flash memory. +- * Set it big enough to allow detecting partition and reading important data. +- */ +-#define BCM47XXPART_BYTES_TO_READ 0x404 +- + /* Magics */ + #define BOARD_DATA_MAGIC 0x5246504D /* MPFR */ + #define POT_MAGIC1 0x54544f50 /* POTT */ +@@ -63,14 +57,17 @@ static int bcm47xxpart_parse(struct mtd_ + struct trx_header *trx; + int trx_part = -1; + int last_trx_part = -1; ++ int max_bytes_to_read = 0x8004; + + if (blocksize <= 0x10000) + blocksize = 0x10000; ++ if (blocksize == 0x20000) ++ max_bytes_to_read = 0x18004; + + /* Alloc */ + parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, + GFP_KERNEL); +- buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL); ++ buf = kzalloc(max_bytes_to_read, GFP_KERNEL); + + /* Parse block by block looking for magics */ + for (offset = 0; offset <= master->size - blocksize; +@@ -85,7 +82,7 @@ static int bcm47xxpart_parse(struct mtd_ + } + + /* Read beginning of the block */ +- if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, ++ if (mtd_read(master, offset, max_bytes_to_read, + &bytes_read, (uint8_t *)buf) < 0) { + pr_err("mtd_read error while parsing (offset: 0x%X)!\n", + offset); +@@ -100,9 +97,16 @@ static int bcm47xxpart_parse(struct mtd_ + } + + /* Standard NVRAM */ +- if (buf[0x000 / 4] == NVRAM_HEADER) { ++ if (buf[0x000 / 4] == NVRAM_HEADER || ++ buf[0x1000 / 4] == NVRAM_HEADER || ++ buf[0x8000 / 4] == NVRAM_HEADER || ++ (blocksize == 0x20000 && ( ++ buf[0x10000 / 4] == NVRAM_HEADER || ++ buf[0x11000 / 4] == NVRAM_HEADER || ++ buf[0x18000 / 4] == NVRAM_HEADER))) { + bcm47xxpart_add_part(&parts[curr_part++], "nvram", + offset, 0); ++ offset = rounddown(offset, blocksize); + continue; + } + diff --git a/target/linux/brcm47xx/patches-3.8/024-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-3.8/024-mtd-bcm47xxpart-get-nvram.patch new file mode 100644 index 0000000000..9932665b26 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/024-mtd-bcm47xxpart-get-nvram.patch @@ -0,0 +1,34 @@ +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -58,6 +58,7 @@ static int bcm47xxpart_parse(struct mtd_ + int trx_part = -1; + int last_trx_part = -1; + int max_bytes_to_read = 0x8004; ++ bool found_nvram = false; + + if (blocksize <= 0x10000) + blocksize = 0x10000; +@@ -107,6 +108,7 @@ static int bcm47xxpart_parse(struct mtd_ + bcm47xxpart_add_part(&parts[curr_part++], "nvram", + offset, 0); + offset = rounddown(offset, blocksize); ++ found_nvram = true; + continue; + } + +@@ -194,6 +196,15 @@ static int bcm47xxpart_parse(struct mtd_ + parts[trx_part].offset; + } + ++ if (!found_nvram) { ++ pr_err("can not find a nvram partition reserve last block\n"); ++ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess", ++ master->size - blocksize, MTD_WRITEABLE); ++ for (i = 0; i < curr_part; i++) { ++ if (parts[i].size + parts[i].offset == master->size) ++ parts[i].offset -= blocksize; ++ } ++ } + *pparts = parts; + return curr_part; + }; diff --git a/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch b/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch new file mode 100644 index 0000000000..30bdbb2a81 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch @@ -0,0 +1,123 @@ +--- a/drivers/mtd/devices/bcm47xxsflash.c ++++ b/drivers/mtd/devices/bcm47xxsflash.c +@@ -5,6 +5,8 @@ + #include + #include + ++#include "bcm47xxsflash.h" ++ + MODULE_LICENSE("GPL"); + MODULE_DESCRIPTION("Serial flash driver for BCMA bus"); + +@@ -13,26 +15,27 @@ static const char *probes[] = { "bcm47xx + static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) + { +- struct bcma_sflash *sflash = mtd->priv; ++ struct bcm47xxsflash *b47s = mtd->priv; + + /* Check address range */ + if ((from + len) > mtd->size) + return -EINVAL; + +- memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from), ++ memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from), + len); + + return len; + } + +-static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash, +- struct mtd_info *mtd) ++static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s) + { +- mtd->priv = sflash; ++ struct mtd_info *mtd = &b47s->mtd; ++ ++ mtd->priv = b47s; + mtd->name = "bcm47xxsflash"; + mtd->owner = THIS_MODULE; + mtd->type = MTD_ROM; +- mtd->size = sflash->size; ++ mtd->size = b47s->size; + mtd->_read = bcm47xxsflash_read; + + /* TODO: implement writing support and verify/change following code */ +@@ -43,16 +46,23 @@ static void bcm47xxsflash_fill_mtd(struc + static int bcm47xxsflash_probe(struct platform_device *pdev) + { + struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); ++ struct bcm47xxsflash *b47s; + int err; + +- sflash->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); +- if (!sflash->mtd) { ++ b47s = kzalloc(sizeof(*b47s), GFP_KERNEL); ++ if (!b47s) { + err = -ENOMEM; + goto out; + } +- bcm47xxsflash_fill_mtd(sflash, sflash->mtd); ++ sflash->priv = b47s; ++ ++ b47s->window = sflash->window; ++ b47s->blocksize = sflash->blocksize; ++ b47s->numblocks = sflash->numblocks; ++ b47s->size = sflash->size; ++ bcm47xxsflash_fill_mtd(b47s); + +- err = mtd_device_parse_register(sflash->mtd, probes, NULL, NULL, 0); ++ err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0); + if (err) { + pr_err("Failed to register MTD device: %d\n", err); + goto err_dev_reg; +@@ -61,7 +71,7 @@ static int bcm47xxsflash_probe(struct pl + return 0; + + err_dev_reg: +- kfree(sflash->mtd); ++ kfree(&b47s->mtd); + out: + return err; + } +@@ -69,9 +79,10 @@ out: + static int bcm47xxsflash_remove(struct platform_device *pdev) + { + struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); ++ struct bcm47xxsflash *b47s = sflash->priv; + +- mtd_device_unregister(sflash->mtd); +- kfree(sflash->mtd); ++ mtd_device_unregister(&b47s->mtd); ++ kfree(b47s); + + return 0; + } +--- /dev/null ++++ b/drivers/mtd/devices/bcm47xxsflash.h +@@ -0,0 +1,15 @@ ++#ifndef __BCM47XXSFLASH_H ++#define __BCM47XXSFLASH_H ++ ++#include ++ ++struct bcm47xxsflash { ++ u32 window; ++ u32 blocksize; ++ u16 numblocks; ++ u32 size; ++ ++ struct mtd_info mtd; ++}; ++ ++#endif /* BCM47XXSFLASH */ +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -528,6 +528,7 @@ struct bcma_sflash { + u32 size; + + struct mtd_info *mtd; ++ void *priv; + }; + #endif + diff --git a/target/linux/brcm47xx/patches-3.8/031-mtd-bcm47xxsflash-write-number-of-written-bytes.patch b/target/linux/brcm47xx/patches-3.8/031-mtd-bcm47xxsflash-write-number-of-written-bytes.patch new file mode 100644 index 0000000000..9c41cad7cf --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/031-mtd-bcm47xxsflash-write-number-of-written-bytes.patch @@ -0,0 +1,10 @@ +--- a/drivers/mtd/devices/bcm47xxsflash.c ++++ b/drivers/mtd/devices/bcm47xxsflash.c +@@ -23,6 +23,7 @@ static int bcm47xxsflash_read(struct mtd + + memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from), + len); ++ *retlen = len; + + return len; + } diff --git a/target/linux/brcm47xx/patches-3.8/032-mtd-bcm47xxsflash-register-this-as-normal-driver.patch b/target/linux/brcm47xx/patches-3.8/032-mtd-bcm47xxsflash-register-this-as-normal-driver.patch new file mode 100644 index 0000000000..2d30e8f97e --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/032-mtd-bcm47xxsflash-register-this-as-normal-driver.patch @@ -0,0 +1,19 @@ +--- a/drivers/mtd/devices/bcm47xxsflash.c ++++ b/drivers/mtd/devices/bcm47xxsflash.c +@@ -89,6 +89,7 @@ static int bcm47xxsflash_remove(struct p + } + + static struct platform_driver bcma_sflash_driver = { ++ .probe = bcm47xxsflash_probe, + .remove = bcm47xxsflash_remove, + .driver = { + .name = "bcma_sflash", +@@ -100,7 +101,7 @@ static int __init bcm47xxsflash_init(voi + { + int err; + +- err = platform_driver_probe(&bcma_sflash_driver, bcm47xxsflash_probe); ++ err = platform_driver_register(&bcma_sflash_driver); + if (err) + pr_err("Failed to register BCMA serial flash driver: %d\n", + err); diff --git a/target/linux/brcm47xx/patches-3.8/033-mtd-bcm47xxsflash-adjust-names-of-bus-specific-funct.patch b/target/linux/brcm47xx/patches-3.8/033-mtd-bcm47xxsflash-adjust-names-of-bus-specific-funct.patch new file mode 100644 index 0000000000..bf61285e90 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/033-mtd-bcm47xxsflash-adjust-names-of-bus-specific-funct.patch @@ -0,0 +1,45 @@ +--- a/drivers/mtd/devices/bcm47xxsflash.c ++++ b/drivers/mtd/devices/bcm47xxsflash.c +@@ -44,7 +44,11 @@ static void bcm47xxsflash_fill_mtd(struc + mtd->writebufsize = mtd->writesize = 1; + } + +-static int bcm47xxsflash_probe(struct platform_device *pdev) ++/************************************************** ++ * BCMA ++ **************************************************/ ++ ++static int bcm47xxsflash_bcma_probe(struct platform_device *pdev) + { + struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); + struct bcm47xxsflash *b47s; +@@ -77,7 +81,7 @@ out: + return err; + } + +-static int bcm47xxsflash_remove(struct platform_device *pdev) ++static int bcm47xxsflash_bcma_remove(struct platform_device *pdev) + { + struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); + struct bcm47xxsflash *b47s = sflash->priv; +@@ -89,14 +93,18 @@ static int bcm47xxsflash_remove(struct p + } + + static struct platform_driver bcma_sflash_driver = { +- .probe = bcm47xxsflash_probe, +- .remove = bcm47xxsflash_remove, ++ .probe = bcm47xxsflash_bcma_probe, ++ .remove = bcm47xxsflash_bcma_remove, + .driver = { + .name = "bcma_sflash", + .owner = THIS_MODULE, + }, + }; + ++/************************************************** ++ * Init ++ **************************************************/ ++ + static int __init bcm47xxsflash_init(void) + { + int err; diff --git a/target/linux/brcm47xx/patches-3.8/041-mtd-bcm47xxnflash-fix-message.patch b/target/linux/brcm47xx/patches-3.8/041-mtd-bcm47xxnflash-fix-message.patch new file mode 100644 index 0000000000..faefac07ec --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/041-mtd-bcm47xxnflash-fix-message.patch @@ -0,0 +1,12 @@ +--- a/drivers/mtd/nand/bcm47xxnflash/main.c ++++ b/drivers/mtd/nand/bcm47xxnflash/main.c +@@ -94,7 +94,8 @@ static int __init bcm47xxnflash_init(voi + */ + err = platform_driver_probe(&bcm47xxnflash_driver, bcm47xxnflash_probe); + if (err) +- pr_err("Failed to register serial flash driver: %d\n", err); ++ pr_err("Failed to register bcm47xx nand flash driver: %d\n", ++ err); + + return err; + } diff --git a/target/linux/brcm47xx/patches-3.8/042-mtd-bcm47xxnflash-register-this-as-normal-driver.patch b/target/linux/brcm47xx/patches-3.8/042-mtd-bcm47xxnflash-register-this-as-normal-driver.patch new file mode 100644 index 0000000000..5caa2ccaa2 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/042-mtd-bcm47xxnflash-register-this-as-normal-driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/nand/bcm47xxnflash/main.c ++++ b/drivers/mtd/nand/bcm47xxnflash/main.c +@@ -77,6 +77,7 @@ static int bcm47xxnflash_remove(struct p + } + + static struct platform_driver bcm47xxnflash_driver = { ++ .probe = bcm47xxnflash_probe, + .remove = bcm47xxnflash_remove, + .driver = { + .name = "bcma_nflash", +@@ -88,11 +89,7 @@ static int __init bcm47xxnflash_init(voi + { + int err; + +- /* +- * Platform device "bcma_nflash" exists on SoCs and is registered very +- * early, it won't be added during runtime (use platform_driver_probe). +- */ +- err = platform_driver_probe(&bcm47xxnflash_driver, bcm47xxnflash_probe); ++ err = platform_driver_register(&bcm47xxnflash_driver); + if (err) + pr_err("Failed to register bcm47xx nand flash driver: %d\n", + err); diff --git a/target/linux/brcm47xx/patches-3.8/043-mtd-bcm47xxnflash-use-pr_fmt-for-module-prefix-in-me.patch b/target/linux/brcm47xx/patches-3.8/043-mtd-bcm47xxnflash-use-pr_fmt-for-module-prefix-in-me.patch new file mode 100644 index 0000000000..2333454a47 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/043-mtd-bcm47xxnflash-use-pr_fmt-for-module-prefix-in-me.patch @@ -0,0 +1,50 @@ +--- a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h ++++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h +@@ -1,6 +1,10 @@ + #ifndef __BCM47XXNFLASH_H + #define __BCM47XXNFLASH_H + ++#ifndef pr_fmt ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++#endif ++ + #include + #include + +--- a/drivers/mtd/nand/bcm47xxnflash/main.c ++++ b/drivers/mtd/nand/bcm47xxnflash/main.c +@@ -9,14 +9,14 @@ + * + */ + ++#include "bcm47xxnflash.h" ++ + #include + #include + #include + #include + #include + +-#include "bcm47xxnflash.h" +- + MODULE_DESCRIPTION("NAND flash driver for BCMA bus"); + MODULE_LICENSE("GPL"); + MODULE_AUTHOR("Rafał Miłecki"); +--- a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c ++++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c +@@ -9,13 +9,13 @@ + * + */ + ++#include "bcm47xxnflash.h" ++ + #include + #include + #include + #include + +-#include "bcm47xxnflash.h" +- + /* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has + * shown ~1000 retries as maxiumum. */ + #define NFLASH_READY_RETRIES 10000 diff --git a/target/linux/brcm47xx/patches-3.8/052-mtd-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.8/052-mtd-add-serial-flash-driver.patch new file mode 100644 index 0000000000..844f89d4b3 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/052-mtd-add-serial-flash-driver.patch @@ -0,0 +1,345 @@ +--- a/drivers/mtd/devices/bcm47xxsflash.c ++++ b/drivers/mtd/devices/bcm47xxsflash.c +@@ -1,47 +1,153 @@ +-#include ++/* ++ * Broadcom SiliconBackplane chipcommon serial flash interface ++ * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * Copyright 2006, Broadcom Corporation ++ * All Rights Reserved. ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#define pr_fmt(fmt) "bcm47xxsflash: " fmt + #include + #include ++#include ++#include + #include ++#include ++#include ++#include ++#include + #include +-#include +- +-#include "bcm47xxsflash.h" ++#include + + MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("Serial flash driver for BCMA bus"); ++MODULE_DESCRIPTION("BCM47XX serial flash driver"); + + static const char *probes[] = { "bcm47xxpart", NULL }; + ++static int ++sflash_mtd_poll(struct bcm47xxsflash *sflash, unsigned int offset, int timeout) ++{ ++ unsigned long now = jiffies; ++ ++ for (;;) { ++ if (!sflash->poll(sflash, offset)) { ++ break; ++ } ++ if (time_after(jiffies, now + timeout)) { ++ pr_err("timeout while polling\n"); ++ return -ETIMEDOUT; ++ ++ } ++ cpu_relax(); ++ udelay(1); ++ } ++ ++ return 0; ++} ++ + static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) + { +- struct bcm47xxsflash *b47s = mtd->priv; ++ struct bcm47xxsflash *sflash = (struct bcm47xxsflash *)mtd->priv; + + /* Check address range */ ++ if (!len) ++ return 0; ++ + if ((from + len) > mtd->size) + return -EINVAL; + +- memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from), ++ memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from), + len); + *retlen = len; + + return len; + } + +-static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s) ++static int ++sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) + { +- struct mtd_info *mtd = &b47s->mtd; ++ int bytes; ++ int ret; ++ struct bcm47xxsflash *sflash = (struct bcm47xxsflash *)mtd->priv; + +- mtd->priv = b47s; +- mtd->name = "bcm47xxsflash"; +- mtd->owner = THIS_MODULE; +- mtd->type = MTD_ROM; +- mtd->size = b47s->size; +- mtd->_read = bcm47xxsflash_read; ++ /* Check address range */ ++ if (!len) ++ return 0; ++ ++ if ((to + len) > mtd->size) ++ return -EINVAL; ++ ++ *retlen = 0; ++ while (len) { ++ ret = sflash->write(sflash, to, len, buf); ++ if (ret < 0) ++ return ret; ++ ++ bytes = ret; ++ ++ ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10); ++ if (ret) ++ return ret; ++ ++ to += (loff_t) bytes; ++ len -= bytes; ++ buf += bytes; ++ *retlen += bytes; ++ } + +- /* TODO: implement writing support and verify/change following code */ +- mtd->flags = MTD_CAP_ROM; +- mtd->writebufsize = mtd->writesize = 1; ++ return 0; ++} ++ ++static int ++sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase) ++{ ++ struct bcm47xxsflash *sflash = (struct bcm47xxsflash *) mtd->priv; ++ int i, j, ret = 0; ++ unsigned int addr, len; ++ ++ /* Check address range */ ++ if (!erase->len) ++ return 0; ++ if ((erase->addr + erase->len) > mtd->size) ++ return -EINVAL; ++ ++ addr = erase->addr; ++ len = erase->len; ++ ++ /* Ensure that requested regions are aligned */ ++ for (i = 0; i < mtd->numeraseregions; i++) { ++ for (j = 0; j < mtd->eraseregions[i].numblocks; j++) { ++ if (addr == mtd->eraseregions[i].offset + ++ mtd->eraseregions[i].erasesize * j && ++ len >= mtd->eraseregions[i].erasesize) { ++ ret = sflash->erase(sflash, addr); ++ if (ret < 0) ++ break; ++ ret = sflash_mtd_poll(sflash, addr, 10 * HZ); ++ if (ret) ++ break; ++ addr += mtd->eraseregions[i].erasesize; ++ len -= mtd->eraseregions[i].erasesize; ++ } ++ } ++ if (ret) ++ break; ++ } ++ ++ /* Set erase status */ ++ if (ret) ++ erase->state = MTD_ERASE_FAILED; ++ else ++ erase->state = MTD_ERASE_DONE; ++ ++ /* Call erase callback */ ++ if (erase->callback) ++ erase->callback(erase); ++ ++ return ret; + } + + /************************************************** +@@ -50,53 +156,94 @@ static void bcm47xxsflash_fill_mtd(struc + + static int bcm47xxsflash_bcma_probe(struct platform_device *pdev) + { +- struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); +- struct bcm47xxsflash *b47s; +- int err; ++ struct bcm47xxsflash *sflash = dev_get_platdata(&pdev->dev); ++ struct mtd_info *mtd; ++ struct mtd_erase_region_info *eraseregions; ++ int ret = 0; ++ ++ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); ++ if (!mtd){ ++ ret = -ENOMEM; ++ goto err_out; ++ } + +- b47s = kzalloc(sizeof(*b47s), GFP_KERNEL); +- if (!b47s) { +- err = -ENOMEM; +- goto out; +- } +- sflash->priv = b47s; +- +- b47s->window = sflash->window; +- b47s->blocksize = sflash->blocksize; +- b47s->numblocks = sflash->numblocks; +- b47s->size = sflash->size; +- bcm47xxsflash_fill_mtd(b47s); +- +- err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0); +- if (err) { +- pr_err("Failed to register MTD device: %d\n", err); +- goto err_dev_reg; ++ eraseregions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL); ++ if (!eraseregions) { ++ ret = -ENOMEM; ++ goto err_free_mtd; + } + ++ pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n", ++ sflash->blocksize / 1024, sflash->numblocks, sflash->size / 1024); ++ ++ /* Setup region info */ ++ eraseregions->offset = 0; ++ eraseregions->erasesize = sflash->blocksize; ++ eraseregions->numblocks = sflash->numblocks; ++ if (eraseregions->erasesize > mtd->erasesize) ++ mtd->erasesize = eraseregions->erasesize; ++ mtd->size = sflash->size; ++ mtd->numeraseregions = 1; ++ ++ /* Register with MTD */ ++ mtd->name = "bcm47xx-sflash"; ++ mtd->type = MTD_NORFLASH; ++ mtd->flags = MTD_CAP_NORFLASH; ++ mtd->eraseregions = eraseregions; ++ mtd->_erase = sflash_mtd_erase; ++ mtd->_read = bcm47xxsflash_read; ++ mtd->_write = sflash_mtd_write; ++ mtd->writesize = 1; ++ mtd->priv = sflash; ++ ret = dev_set_drvdata(&pdev->dev, mtd); ++ mtd->owner = THIS_MODULE; ++ if (ret) { ++ pr_err("adding private data failed\n"); ++ goto err_free_eraseregions; ++ } ++ ++ ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0); ++ ++ if (ret) { ++ pr_err("mtd_device_register failed\n"); ++ goto err_free_eraseregions; ++ } + return 0; + +-err_dev_reg: +- kfree(&b47s->mtd); +-out: +- return err; ++err_free_eraseregions: ++ kfree(eraseregions); ++err_free_mtd: ++ kfree(mtd); ++err_out: ++ return ret; + } + + static int bcm47xxsflash_bcma_remove(struct platform_device *pdev) + { +- struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); +- struct bcm47xxsflash *b47s = sflash->priv; +- +- mtd_device_unregister(&b47s->mtd); +- kfree(b47s); ++ struct mtd_info *mtd = dev_get_drvdata(&pdev->dev); + ++ if (mtd) { ++ mtd_device_unregister(mtd); ++ map_destroy(mtd); ++ kfree(mtd->eraseregions); ++ kfree(mtd); ++ dev_set_drvdata(&pdev->dev, NULL); ++ } + return 0; + } + ++static const struct platform_device_id bcm47xxsflash_table[] = { ++ { "bcm47xx-sflash", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(platform, bcm47xxsflash_table); ++ + static struct platform_driver bcma_sflash_driver = { ++ .id_table = bcm47xxsflash_table, + .probe = bcm47xxsflash_bcma_probe, + .remove = bcm47xxsflash_bcma_remove, + .driver = { +- .name = "bcma_sflash", ++ .name = "bcm47xx-sflash", + .owner = THIS_MODULE, + }, + }; +@@ -111,8 +258,7 @@ static int __init bcm47xxsflash_init(voi + + err = platform_driver_register(&bcma_sflash_driver); + if (err) +- pr_err("Failed to register BCMA serial flash driver: %d\n", +- err); ++ pr_err("error registering platform driver: %i\n", err); + + return err; + } +--- /dev/null ++++ b/include/linux/mtd/bcm47xxsflash.h +@@ -0,0 +1,33 @@ ++#ifndef LINUX_MTD_BCM47XX_SFLASH_H_ ++#define LINUX_MTD_BCM47XX_SFLASH_H_ ++ ++#include ++ ++enum bcm47xxsflash_type { ++ BCM47XX_SFLASH_SSB, ++ BCM47XX_SFLASH_BCMA, ++}; ++ ++struct ssb_chipcommon; ++struct bcma_drv_cc; ++ ++struct bcm47xxsflash { ++ enum bcm47xxsflash_type type; ++ union { ++ struct ssb_chipcommon *scc; ++ struct bcma_drv_cc *bcc; ++ }; ++ ++ bool present; ++ u16 numblocks; ++ u32 window; ++ u32 blocksize; ++ u32 size; ++ ++ int (*poll)(struct bcm47xxsflash *dev, u32 offset); ++ int (*write)(struct bcm47xxsflash *dev, u32 offset, u32 len, const u8 *buf); ++ int (*erase)(struct bcm47xxsflash *dev, u32 offset); ++ ++ struct mtd_info *mtd; ++}; ++#endif /* LINUX_MTD_BCM47XX_SFLASH_H_ */ diff --git a/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch new file mode 100644 index 0000000000..9a9c19417e --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch @@ -0,0 +1,372 @@ +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -139,7 +139,7 @@ config SSB_DRIVER_MIPS + + config SSB_SFLASH + bool "SSB serial flash support" +- depends on SSB_DRIVER_MIPS && BROKEN ++ depends on SSB_DRIVER_MIPS + default y + + # Assumption: We are on embedded, if we compile the MIPS core. +--- a/drivers/ssb/driver_chipcommon_sflash.c ++++ b/drivers/ssb/driver_chipcommon_sflash.c +@@ -1,14 +1,35 @@ + /* + * Sonics Silicon Backplane + * ChipCommon serial flash interface ++ * Copyright 2011, Jonas Gorski ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * Copyright 2010, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + ++#include ++#include + #include ++#include + + #include "ssb_private.h" + ++#define NUM_RETRIES 3 ++ ++static struct resource ssb_sflash_resource = { ++ .name = "ssb_sflash", ++ .start = SSB_FLASH2, ++ .end = 0, ++ .flags = IORESOURCE_MEM | IORESOURCE_READONLY, ++}; ++ ++struct platform_device ssb_sflash_dev = { ++ .name = "bcm47xx-sflash", ++ .resource = &ssb_sflash_resource, ++ .num_resources = 1, ++}; ++ + struct ssb_sflash_tbl_e { + char *name; + u32 id; +@@ -16,7 +37,7 @@ struct ssb_sflash_tbl_e { + u16 numblocks; + }; + +-static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { ++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { + { "M25P20", 0x11, 0x10000, 4, }, + { "M25P40", 0x12, 0x10000, 8, }, + +@@ -27,7 +48,7 @@ static struct ssb_sflash_tbl_e ssb_sflas + { 0 }, + }; + +-static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { ++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { + { "SST25WF512", 1, 0x1000, 16, }, + { "SST25VF512", 0x48, 0x1000, 16, }, + { "SST25WF010", 2, 0x1000, 32, }, +@@ -45,7 +66,7 @@ static struct ssb_sflash_tbl_e ssb_sflas + { 0 }, + }; + +-static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { ++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { + { "AT45DB011", 0xc, 256, 512, }, + { "AT45DB021", 0x14, 256, 1024, }, + { "AT45DB041", 0x1c, 256, 2048, }, +@@ -70,10 +91,186 @@ static void ssb_sflash_cmd(struct ssb_ch + pr_err("SFLASH control command failed (timeout)!\n"); + } + ++static void ssb_sflash_write_u8(struct ssb_chipcommon *chipco, u32 offset, u8 byte) ++{ ++ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset); ++ chipco_write32(chipco, SSB_CHIPCO_FLASHDATA, byte); ++} ++ ++/* Poll for command completion. Returns zero when complete. */ ++static int ssb_sflash_poll(struct bcm47xxsflash *dev, u32 offset) ++{ ++ struct ssb_chipcommon *chipco = dev->scc; ++ ++ if (offset >= chipco->sflash.size) ++ return -22; ++ ++ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) { ++ case SSB_CHIPCO_FLASHT_STSER: ++ /* Check for ST Write In Progress bit */ ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RDSR); ++ return chipco_read32(chipco, SSB_CHIPCO_FLASHDATA) ++ & SSB_CHIPCO_FLASHDATA_ST_WIP; ++ case SSB_CHIPCO_FLASHT_ATSER: ++ /* Check for Atmel Ready bit */ ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS); ++ return !(chipco_read32(chipco, SSB_CHIPCO_FLASHDATA) ++ & SSB_CHIPCO_FLASHDATA_AT_READY); ++ } ++ ++ return 0; ++} ++ ++ ++static int sflash_st_write(struct bcm47xxsflash *dev, u32 offset, u32 len, ++ const u8 *buf) ++{ ++ int written = 1; ++ struct ssb_chipcommon *chipco = dev->scc; ++ ++ /* Enable writes */ ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN); ++ ssb_sflash_write_u8(chipco, offset, *buf++); ++ /* Issue a page program with CSA bit set */ ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_CSA | SSB_CHIPCO_FLASHCTL_ST_PP); ++ offset++; ++ len--; ++ while (len > 0) { ++ if ((offset & 255) == 0) { ++ /* Page boundary, poll droping cs and return */ ++ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0); ++ udelay(1); ++ if (!ssb_sflash_poll(dev, offset)) { ++ /* Flash rejected command */ ++ return -EAGAIN; ++ } ++ return written; ++ } else { ++ /* Write single byte */ ++ ssb_sflash_cmd(chipco, ++ SSB_CHIPCO_FLASHCTL_ST_CSA | ++ *buf++); ++ } ++ written++; ++ offset++; ++ len--; ++ } ++ /* All done, drop cs & poll */ ++ chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0); ++ udelay(1); ++ if (!ssb_sflash_poll(dev, offset)) { ++ /* Flash rejected command */ ++ return -EAGAIN; ++ } ++ return written; ++} ++ ++static int sflash_at_write(struct bcm47xxsflash *dev, u32 offset, u32 len, ++ const u8 *buf) ++{ ++ struct ssb_chipcommon *chipco = dev->scc; ++ u32 page, byte, mask; ++ int ret = 0; ++ ++ mask = dev->blocksize - 1; ++ page = (offset & ~mask) << 1; ++ byte = offset & mask; ++ /* Read main memory page into buffer 1 */ ++ if (byte || (len < dev->blocksize)) { ++ int i = 100; ++ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page); ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD); ++ /* 250 us for AT45DB321B */ ++ while (i > 0 && ssb_sflash_poll(dev, offset)) { ++ udelay(10); ++ i--; ++ } ++ BUG_ON(!ssb_sflash_poll(dev, offset)); ++ } ++ /* Write into buffer 1 */ ++ for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) { ++ ssb_sflash_write_u8(chipco, byte++, *buf++); ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE); ++ } ++ /* Write buffer 1 into main memory page */ ++ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page); ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM); ++ ++ return ret; ++} ++ ++/* Write len bytes starting at offset into buf. Returns number of bytes ++ * written. Caller should poll for completion. ++ */ ++static int ssb_sflash_write(struct bcm47xxsflash *dev, u32 offset, u32 len, ++ const u8 *buf) ++{ ++ int ret = 0, tries = NUM_RETRIES; ++ struct ssb_chipcommon *chipco = dev->scc; ++ ++ if (!len) ++ return 0; ++ ++ if ((offset + len) > chipco->sflash.size) ++ return -EINVAL; ++ ++ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) { ++ case SSB_CHIPCO_FLASHT_STSER: ++ do { ++ ret = sflash_st_write(dev, offset, len, buf); ++ tries--; ++ } while (ret == -EAGAIN && tries > 0); ++ ++ if (ret == -EAGAIN && tries == 0) { ++ pr_info("ST Flash rejected write\n"); ++ ret = -EIO; ++ } ++ break; ++ case SSB_CHIPCO_FLASHT_ATSER: ++ ret = sflash_at_write(dev, offset, len, buf); ++ break; ++ } ++ ++ return ret; ++} ++ ++/* Erase a region. Returns number of bytes scheduled for erasure. ++ * Caller should poll for completion. ++ */ ++static int ssb_sflash_erase(struct bcm47xxsflash *dev, u32 offset) ++{ ++ struct ssb_chipcommon *chipco = dev->scc; ++ ++ if (offset >= chipco->sflash.size) ++ return -EINVAL; ++ ++ switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) { ++ case SSB_CHIPCO_FLASHT_STSER: ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN); ++ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset); ++ /* Newer flashes have "sub-sectors" which can be erased independently ++ * with a new command: ST_SSE. The ST_SE command erases 64KB just as ++ * before. ++ */ ++ if (dev->blocksize < (64 * 1024)) ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SSE); ++ else ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SE); ++ return dev->blocksize; ++ case SSB_CHIPCO_FLASHT_ATSER: ++ chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset << 1); ++ ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE); ++ return dev->blocksize; ++ } ++ ++ return 0; ++} ++ + /* Initialize serial flash access */ + int ssb_sflash_init(struct ssb_chipcommon *cc) + { +- struct ssb_sflash_tbl_e *e; ++ struct bcm47xxsflash *sflash = &cc->sflash; ++ const struct ssb_sflash_tbl_e *e; + u32 id, id2; + + switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { +@@ -131,10 +328,26 @@ int ssb_sflash_init(struct ssb_chipcommo + return -ENOTSUPP; + } + +- pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", +- e->name, e->blocksize, e->numblocks); +- +- pr_err("Serial flash support is not implemented yet!\n"); ++ sflash->window = SSB_FLASH2; ++ sflash->blocksize = e->blocksize; ++ sflash->numblocks = e->numblocks; ++ sflash->size = sflash->blocksize * sflash->numblocks; ++ sflash->present = true; ++ sflash->poll = ssb_sflash_poll; ++ sflash->write = ssb_sflash_write; ++ sflash->erase = ssb_sflash_erase; ++ sflash->type = BCM47XX_SFLASH_SSB; ++ sflash->scc = cc; ++ ++ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", ++ e->name, sflash->size / 1024, sflash->blocksize, ++ sflash->numblocks); ++ ++ /* Prepare platform device, but don't register it yet. It's too early, ++ * malloc (required by device_private_init) is not available yet. */ ++ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start + ++ sflash->size; ++ ssb_sflash_dev.dev.platform_data = sflash; + +- return -ENOTSUPP; ++ return 0; + } +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -549,6 +549,15 @@ static int ssb_devices_register(struct s + dev_idx++; + } + ++#ifdef CONFIG_SSB_SFLASH ++ if (bus->chipco.sflash.present) { ++ err = platform_device_register(&ssb_sflash_dev); ++ if (err) ++ ssb_printk(KERN_ERR PFX ++ "Error registering serial flash\n"); ++ } ++#endif ++ + #ifdef CONFIG_SSB_DRIVER_MIPS + if (bus->mipscore.pflash.present) { + err = platform_device_register(&ssb_pflash_dev); +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -220,6 +220,7 @@ extern u32 ssb_chipco_watchdog_timer_set + /* driver_chipcommon_sflash.c */ + #ifdef CONFIG_SSB_SFLASH + int ssb_sflash_init(struct ssb_chipcommon *cc); ++extern struct platform_device ssb_sflash_dev; + #else + static inline int ssb_sflash_init(struct ssb_chipcommon *cc) + { +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -13,6 +13,8 @@ + * Licensed under the GPL version 2. See COPYING for details. + */ + ++#include ++ + /** ChipCommon core registers. **/ + + #define SSB_CHIPCO_CHIPID 0x0000 +@@ -121,6 +123,17 @@ + #define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START + #define SSB_CHIPCO_FLASHADDR 0x0044 + #define SSB_CHIPCO_FLASHDATA 0x0048 ++/* Status register bits for ST flashes */ ++#define SSB_CHIPCO_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ ++#define SSB_CHIPCO_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ ++#define SSB_CHIPCO_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ ++#define SSB_CHIPCO_FLASHDATA_ST_BP_SHIFT 2 ++#define SSB_CHIPCO_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ ++/* Status register bits for Atmel flashes */ ++#define SSB_CHIPCO_FLASHDATA_AT_READY 0x80 ++#define SSB_CHIPCO_FLASHDATA_AT_MISMATCH 0x40 ++#define SSB_CHIPCO_FLASHDATA_AT_ID_MASK 0x38 ++#define SSB_CHIPCO_FLASHDATA_AT_ID_SHIFT 3 + #define SSB_CHIPCO_BCAST_ADDR 0x0050 + #define SSB_CHIPCO_BCAST_DATA 0x0054 + #define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +@@ -503,7 +516,7 @@ + #define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */ + #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ + #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ +-#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ ++#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00D9 /* Deep Power-down */ + #define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */ + #define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ + #define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ +@@ -594,6 +607,9 @@ struct ssb_chipcommon { + struct ssb_chipcommon_pmu pmu; + u32 ticks_per_ms; + u32 max_timer_ms; ++#ifdef CONFIG_SSB_SFLASH ++ struct bcm47xxsflash sflash; ++#endif + }; + + static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) diff --git a/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch b/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch new file mode 100644 index 0000000000..934443d7a0 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch @@ -0,0 +1,300 @@ +--- a/drivers/bcma/driver_chipcommon_sflash.c ++++ b/drivers/bcma/driver_chipcommon_sflash.c +@@ -1,6 +1,9 @@ + /* + * Broadcom specific AMBA + * ChipCommon serial flash interface ++ * Copyright 2011, Jonas Gorski ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * Copyright 2010, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -8,7 +11,11 @@ + #include "bcma_private.h" + + #include ++#include + #include ++#include ++ ++#define NUM_RETRIES 3 + + static struct resource bcma_sflash_resource = { + .name = "bcma_sflash", +@@ -18,7 +25,7 @@ static struct resource bcma_sflash_resou + }; + + struct platform_device bcma_sflash_dev = { +- .name = "bcma_sflash", ++ .name = "bcm47xx-sflash", + .resource = &bcma_sflash_resource, + .num_resources = 1, + }; +@@ -30,7 +37,7 @@ struct bcma_sflash_tbl_e { + u16 numblocks; + }; + +-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { ++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = { + { "M25P20", 0x11, 0x10000, 4, }, + { "M25P40", 0x12, 0x10000, 8, }, + +@@ -41,7 +48,7 @@ static struct bcma_sflash_tbl_e bcma_sfl + { 0 }, + }; + +-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { ++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = { + { "SST25WF512", 1, 0x1000, 16, }, + { "SST25VF512", 0x48, 0x1000, 16, }, + { "SST25WF010", 2, 0x1000, 32, }, +@@ -59,7 +66,7 @@ static struct bcma_sflash_tbl_e bcma_sfl + { 0 }, + }; + +-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { ++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = { + { "AT45DB011", 0xc, 256, 512, }, + { "AT45DB021", 0x14, 256, 1024, }, + { "AT45DB041", 0x1c, 256, 2048, }, +@@ -84,12 +91,186 @@ static void bcma_sflash_cmd(struct bcma_ + bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n"); + } + ++static void bcma_sflash_write_u8(struct bcma_drv_cc *cc, u32 offset, u8 byte) ++{ ++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset); ++ bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte); ++} ++ ++/* Poll for command completion. Returns zero when complete. */ ++static int bcma_sflash_poll(struct bcm47xxsflash *dev, u32 offset) ++{ ++ struct bcma_drv_cc *cc = dev->bcc; ++ ++ if (offset >= cc->sflash.size) ++ return -22; ++ ++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ /* Check for ST Write In Progress bit */ ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR); ++ return bcma_cc_read32(cc, BCMA_CC_FLASHDATA) ++ & BCMA_CC_FLASHDATA_ST_WIP; ++ case BCMA_CC_FLASHT_ATSER: ++ /* Check for Atmel Ready bit */ ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS); ++ return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA) ++ & BCMA_CC_FLASHDATA_AT_READY); ++ } ++ ++ return 0; ++} ++ ++static int sflash_st_write(struct bcm47xxsflash *dev, u32 offset, u32 len, ++ const u8 *buf) ++{ ++ int written = 1; ++ struct bcma_drv_cc *cc = dev->bcc; ++ ++ /* Enable writes */ ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN); ++ bcma_sflash_write_u8(cc, offset, *buf++); ++ /* Issue a page program with CSA bit set */ ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_CSA | BCMA_CC_FLASHCTL_ST_PP); ++ offset++; ++ len--; ++ while (len > 0) { ++ if ((offset & 255) == 0) { ++ /* Page boundary, poll droping cs and return */ ++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0); ++ udelay(1); ++ if (!bcma_sflash_poll(dev, offset)) { ++ /* Flash rejected command */ ++ return -EAGAIN; ++ } ++ return written; ++ } else { ++ /* Write single byte */ ++ bcma_sflash_cmd(cc, ++ BCMA_CC_FLASHCTL_ST_CSA | ++ *buf++); ++ } ++ written++; ++ offset++; ++ len--; ++ } ++ /* All done, drop cs & poll */ ++ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0); ++ udelay(1); ++ if (!bcma_sflash_poll(dev, offset)) { ++ /* Flash rejected command */ ++ return -EAGAIN; ++ } ++ return written; ++} ++ ++static int sflash_at_write(struct bcm47xxsflash *dev, u32 offset, u32 len, ++ const u8 *buf) ++{ ++ struct bcma_drv_cc *cc = dev->bcc; ++ u32 page, byte, mask; ++ int ret = 0; ++ ++ mask = dev->blocksize - 1; ++ page = (offset & ~mask) << 1; ++ byte = offset & mask; ++ /* Read main memory page into buffer 1 */ ++ if (byte || (len < dev->blocksize)) { ++ int i = 100; ++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page); ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD); ++ /* 250 us for AT45DB321B */ ++ while (i > 0 && bcma_sflash_poll(dev, offset)) { ++ udelay(10); ++ i--; ++ } ++ BUG_ON(!bcma_sflash_poll(dev, offset)); ++ } ++ /* Write into buffer 1 */ ++ for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) { ++ bcma_sflash_write_u8(cc, byte++, *buf++); ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_WRITE); ++ } ++ /* Write buffer 1 into main memory page */ ++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page); ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM); ++ ++ return ret; ++} ++ ++/* Write len bytes starting at offset into buf. Returns number of bytes ++ * written. Caller should poll for completion. ++ */ ++static int bcma_sflash_write(struct bcm47xxsflash *dev, u32 offset, u32 len, ++ const u8 *buf) ++{ ++ int ret = 0, tries = NUM_RETRIES; ++ struct bcma_drv_cc *cc = dev->bcc; ++ ++ if (!len) ++ return 0; ++ ++ if ((offset + len) > cc->sflash.size) ++ return -EINVAL; ++ ++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ do { ++ ret = sflash_st_write(dev, offset, len, buf); ++ tries--; ++ } while (ret == -EAGAIN && tries > 0); ++ ++ if (ret == -EAGAIN && tries == 0) { ++ bcma_info(cc->core->bus, "ST Flash rejected write\n"); ++ ret = -EIO; ++ } ++ break; ++ case BCMA_CC_FLASHT_ATSER: ++ ret = sflash_at_write(dev, offset, len, buf); ++ break; ++ } ++ ++ return ret; ++} ++ ++/* Erase a region. Returns number of bytes scheduled for erasure. ++ * Caller should poll for completion. ++ */ ++static int bcma_sflash_erase(struct bcm47xxsflash *dev, u32 offset) ++{ ++ struct bcma_drv_cc *cc = dev->bcc; ++ ++ if (offset >= cc->sflash.size) ++ return -EINVAL; ++ ++ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN); ++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset); ++ /* Newer flashes have "sub-sectors" which can be erased independently ++ * with a new command: ST_SSE. The ST_SE command erases 64KB just as ++ * before. ++ */ ++ if (dev->blocksize < (64 * 1024)) ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SSE); ++ else ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SE); ++ return dev->blocksize; ++ case BCMA_CC_FLASHT_ATSER: ++ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1); ++ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE); ++ return dev->blocksize; ++ } ++ ++ return 0; ++} ++ + /* Initialize serial flash access */ + int bcma_sflash_init(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; +- struct bcma_sflash *sflash = &cc->sflash; +- struct bcma_sflash_tbl_e *e; ++ struct bcm47xxsflash *sflash = &cc->sflash; ++ const struct bcma_sflash_tbl_e *e; + u32 id, id2; + + switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { +@@ -150,6 +331,11 @@ int bcma_sflash_init(struct bcma_drv_cc + sflash->numblocks = e->numblocks; + sflash->size = sflash->blocksize * sflash->numblocks; + sflash->present = true; ++ sflash->poll = bcma_sflash_poll; ++ sflash->write = bcma_sflash_write; ++ sflash->erase = bcma_sflash_erase; ++ sflash->type = BCM47XX_SFLASH_BCMA; ++ sflash->bcc = cc; + + bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", + e->name, sflash->size / 1024, sflash->blocksize, +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -3,6 +3,7 @@ + + #include + #include ++#include + + /** ChipCommon core registers. **/ + #define BCMA_CC_ID 0x0000 +@@ -519,19 +520,6 @@ struct bcma_pflash { + u32 window_size; + }; + +-#ifdef CONFIG_BCMA_SFLASH +-struct bcma_sflash { +- bool present; +- u32 window; +- u32 blocksize; +- u16 numblocks; +- u32 size; +- +- struct mtd_info *mtd; +- void *priv; +-}; +-#endif +- + #ifdef CONFIG_BCMA_NFLASH + struct mtd_info; + +@@ -565,7 +553,7 @@ struct bcma_drv_cc { + #ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; + #ifdef CONFIG_BCMA_SFLASH +- struct bcma_sflash sflash; ++ struct bcm47xxsflash sflash; + #endif + #ifdef CONFIG_BCMA_NFLASH + struct bcma_nflash nflash; diff --git a/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch b/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch new file mode 100644 index 0000000000..04c378f33e --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch @@ -0,0 +1,472 @@ +--- a/arch/mips/bcm47xx/nvram.c ++++ b/arch/mips/bcm47xx/nvram.c +@@ -3,7 +3,7 @@ + * + * Copyright (C) 2005 Broadcom Corporation + * Copyright (C) 2006 Felix Fietkau +- * Copyright (C) 2010-2011 Hauke Mehrtens ++ * Copyright (C) 2010-2012 Hauke Mehrtens + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the +@@ -18,83 +18,168 @@ + #include + #include + #include +-#include ++#include + #include + + static char nvram_buf[NVRAM_SPACE]; + ++static u32 find_nvram_size(u32 end) ++{ ++ struct nvram_header *header; ++ u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000}; ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) { ++ header = (struct nvram_header *)KSEG1ADDR(end - nvram_sizes[i]); ++ if (header->magic == NVRAM_HEADER) ++ return nvram_sizes[i]; ++ } ++ ++ return 0; ++} ++ + /* Probe for NVRAM header */ +-static void early_nvram_init(void) ++static int nvram_find_and_copy(u32 base, u32 lim) + { +-#ifdef CONFIG_BCM47XX_SSB +- struct ssb_mipscore *mcore_ssb; +-#endif +-#ifdef CONFIG_BCM47XX_BCMA +- struct bcma_drv_cc *bcma_cc; +-#endif + struct nvram_header *header; + int i; +- u32 base = 0; +- u32 lim = 0; + u32 off; + u32 *src, *dst; ++ u32 size; + +- switch (bcm47xx_bus_type) { +-#ifdef CONFIG_BCM47XX_SSB +- case BCM47XX_BUS_TYPE_SSB: +- mcore_ssb = &bcm47xx_bus.ssb.mipscore; +- base = mcore_ssb->pflash.window; +- lim = mcore_ssb->pflash.window_size; +- break; +-#endif +-#ifdef CONFIG_BCM47XX_BCMA +- case BCM47XX_BUS_TYPE_BCMA: +- bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc; +- base = bcma_cc->pflash.window; +- lim = bcma_cc->pflash.window_size; +- break; +-#endif +- } +- ++ /* TODO: when nvram is on nand flash check for bad blocks first. */ + off = FLASH_MIN; + while (off <= lim) { + /* Windowed flash access */ +- header = (struct nvram_header *) +- KSEG1ADDR(base + off - NVRAM_SPACE); +- if (header->magic == NVRAM_HEADER) ++ size = find_nvram_size(base + off); ++ if (size) { ++ header = (struct nvram_header *)KSEG1ADDR(base + off - ++ size); + goto found; ++ } + off <<= 1; + } + + /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ + header = (struct nvram_header *) KSEG1ADDR(base + 4096); +- if (header->magic == NVRAM_HEADER) ++ if (header->magic == NVRAM_HEADER) { ++ size = NVRAM_SPACE; + goto found; ++ } + + header = (struct nvram_header *) KSEG1ADDR(base + 1024); +- if (header->magic == NVRAM_HEADER) ++ if (header->magic == NVRAM_HEADER) { ++ size = NVRAM_SPACE; + goto found; ++ } + +- return; ++ pr_err("no nvram found\n"); ++ return -ENXIO; + + found: ++ ++ if (header->len > size) ++ pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n"); ++ if (header->len > NVRAM_SPACE) ++ pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n", ++ header->len, NVRAM_SPACE); ++ + src = (u32 *) header; + dst = (u32 *) nvram_buf; + for (i = 0; i < sizeof(struct nvram_header); i += 4) + *dst++ = *src++; +- for (; i < header->len && i < NVRAM_SPACE; i += 4) ++ for (; i < header->len && i < NVRAM_SPACE && i < size; i += 4) + *dst++ = le32_to_cpu(*src++); ++ memset(dst, 0x0, NVRAM_SPACE - i); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_BCM47XX_SSB ++static int nvram_init_ssb(void) ++{ ++ struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore; ++#ifdef CONFIG_SSB_SFLASH ++ struct ssb_chipcommon *chipco = &bcm47xx_bus.ssb.chipco; ++#endif ++ u32 base; ++ u32 lim; ++ ++ if (mcore->pflash.present) { ++ base = mcore->pflash.window; ++ lim = mcore->pflash.window_size; ++#ifdef CONFIG_SSB_SFLASH ++ } else if (chipco->sflash.present) { ++ base = chipco->sflash.window; ++ lim = chipco->sflash.size; ++#endif ++ } else { ++ pr_err("Couldn't find supported flash memory\n"); ++ return -ENXIO; ++ } ++ ++ return nvram_find_and_copy(base, lim); ++} ++#endif ++ ++#ifdef CONFIG_BCM47XX_BCMA ++static int nvram_init_bcma(void) ++{ ++ struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc; ++ u32 base; ++ u32 lim; ++ ++#ifdef CONFIG_BCMA_NFLASH ++ if (cc->nflash.boot) { ++ base = BCMA_SOC_FLASH1; ++ lim = BCMA_SOC_FLASH1_SZ; ++ } else ++#endif ++ if (cc->pflash.present) { ++ base = cc->pflash.window; ++ lim = cc->pflash.window_size; ++#ifdef CONFIG_BCMA_SFLASH ++ } else if (cc->sflash.present) { ++ base = cc->sflash.window; ++ lim = cc->sflash.size; ++#endif ++ } else { ++ pr_err("Couldn't find supported flash memory\n"); ++ return -ENXIO; ++ } ++ ++ return nvram_find_and_copy(base, lim); + } ++#endif + +-int nvram_getenv(char *name, char *val, size_t val_len) ++static int nvram_init(void) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return nvram_init_ssb(); ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return nvram_init_bcma(); ++#endif ++ } ++ return -ENXIO; ++} ++ ++int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len) + { + char *var, *value, *end, *eq; ++ int err; + + if (!name) +- return NVRAM_ERR_INV_PARAM; ++ return -EINVAL; + +- if (!nvram_buf[0]) +- early_nvram_init(); ++ if (!nvram_buf[0]) { ++ err = nvram_init(); ++ if (err) ++ return err; ++ } + + /* Look for name=value and return value */ + var = &nvram_buf[sizeof(struct nvram_header)]; +@@ -110,6 +195,6 @@ int nvram_getenv(char *name, char *val, + return snprintf(val, val_len, "%s", value); + } + } +- return NVRAM_ERR_ENVNOTFOUND; ++ return -ENOENT; + } +-EXPORT_SYMBOL(nvram_getenv); ++EXPORT_SYMBOL(bcm47xx_nvram_getenv); +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -35,7 +35,7 @@ + #include + #include + #include +-#include ++#include + + union bcm47xx_bus bcm47xx_bus; + EXPORT_SYMBOL(bcm47xx_bus); +@@ -115,7 +115,7 @@ static int bcm47xx_get_invariants(struct + memset(&iv->sprom, 0, sizeof(struct ssb_sprom)); + bcm47xx_fill_sprom(&iv->sprom, NULL, false); + +- if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) ++ if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) + iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); + + return 0; +@@ -138,7 +138,7 @@ static void __init bcm47xx_register_ssb( + panic("Failed to initialize SSB bus (err %d)", err); + + mcore = &bcm47xx_bus.ssb.mipscore; +- if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { ++ if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { + if (strstr(buf, "console=ttyS1")) { + struct ssb_serial_port port; + +--- a/arch/mips/bcm47xx/sprom.c ++++ b/arch/mips/bcm47xx/sprom.c +@@ -27,7 +27,7 @@ + */ + + #include +-#include ++#include + + static void create_key(const char *prefix, const char *postfix, + const char *name, char *buf, int len) +@@ -50,10 +50,10 @@ static int get_nvram_var(const char *pre + + create_key(prefix, postfix, name, key, sizeof(key)); + +- err = nvram_getenv(key, buf, len); +- if (fallback && err == NVRAM_ERR_ENVNOTFOUND && prefix) { ++ err = bcm47xx_nvram_getenv(key, buf, len); ++ if (fallback && err == -ENOENT && prefix) { + create_key(NULL, postfix, name, key, sizeof(key)); +- err = nvram_getenv(key, buf, len); ++ err = bcm47xx_nvram_getenv(key, buf, len); + } + return err; + } +@@ -144,7 +144,7 @@ static void nvram_read_macaddr(const cha + if (err < 0) + return; + +- nvram_parse_macaddr(buf, *val); ++ bcm47xx_nvram_parse_macaddr(buf, *val); + } + + static void nvram_read_alpha2(const char *prefix, const char *name, +--- /dev/null ++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h +@@ -0,0 +1,51 @@ ++/* ++ * Copyright (C) 2005, Broadcom Corporation ++ * Copyright (C) 2006, Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#ifndef __BCM47XX_NVRAM_H ++#define __BCM47XX_NVRAM_H ++ ++#include ++#include ++ ++struct nvram_header { ++ u32 magic; ++ u32 len; ++ u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ ++ u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ ++ u32 config_ncdl; /* ncdl values for memc */ ++}; ++ ++#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */ ++#define NVRAM_VERSION 1 ++#define NVRAM_HEADER_SIZE 20 ++#define NVRAM_SPACE 0x8000 ++ ++#define FLASH_MIN 0x00020000 /* Minimum flash size */ ++ ++#define NVRAM_MAX_VALUE_LEN 255 ++#define NVRAM_MAX_PARAM_LEN 64 ++ ++extern int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len); ++ ++static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6]) ++{ ++ if (strchr(buf, ':')) ++ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], ++ &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], ++ &macaddr[5]); ++ else if (strchr(buf, '-')) ++ sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0], ++ &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], ++ &macaddr[5]); ++ else ++ printk(KERN_WARNING "Can not parse mac address: %s\n", buf); ++} ++ ++#endif /* __BCM47XX_NVRAM_H */ +--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h ++++ /dev/null +@@ -1,54 +0,0 @@ +-/* +- * Copyright (C) 2005, Broadcom Corporation +- * Copyright (C) 2006, Felix Fietkau +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; either version 2 of the License, or (at your +- * option) any later version. +- */ +- +-#ifndef __NVRAM_H +-#define __NVRAM_H +- +-#include +-#include +- +-struct nvram_header { +- u32 magic; +- u32 len; +- u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ +- u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ +- u32 config_ncdl; /* ncdl values for memc */ +-}; +- +-#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */ +-#define NVRAM_VERSION 1 +-#define NVRAM_HEADER_SIZE 20 +-#define NVRAM_SPACE 0x8000 +- +-#define FLASH_MIN 0x00020000 /* Minimum flash size */ +- +-#define NVRAM_MAX_VALUE_LEN 255 +-#define NVRAM_MAX_PARAM_LEN 64 +- +-#define NVRAM_ERR_INV_PARAM -8 +-#define NVRAM_ERR_ENVNOTFOUND -9 +- +-extern int nvram_getenv(char *name, char *val, size_t val_len); +- +-static inline void nvram_parse_macaddr(char *buf, u8 macaddr[6]) +-{ +- if (strchr(buf, ':')) +- sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], +- &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], +- &macaddr[5]); +- else if (strchr(buf, '-')) +- sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0], +- &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], +- &macaddr[5]); +- else +- printk(KERN_WARNING "Can not parse mac address: %s\n", buf); +-} +- +-#endif +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -14,7 +14,7 @@ + #include + #include + #include +-#include ++#include + + /* 10 parts were found on sflash on Netgear WNDR4500 */ + #define BCM47XXPART_MAX_PARTS 12 +--- a/drivers/net/ethernet/broadcom/b44.c ++++ b/drivers/net/ethernet/broadcom/b44.c +@@ -381,7 +381,7 @@ static void b44_set_flow_ctrl(struct b44 + } + + #ifdef CONFIG_BCM47XX +-#include ++#include + static void b44_wap54g10_workaround(struct b44 *bp) + { + char buf[20]; +@@ -393,7 +393,7 @@ static void b44_wap54g10_workaround(stru + * see https://dev.openwrt.org/ticket/146 + * check and reset bit "isolate" + */ +- if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0) ++ if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) < 0) + return; + if (simple_strtoul(buf, NULL, 0) == 2) { + err = __b44_readphy(bp, 0, MII_BMCR, &val); +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -14,7 +14,7 @@ + #include + #include + #ifdef CONFIG_BCM47XX +-#include ++#include + #endif + + #include "ssb_private.h" +@@ -322,7 +322,7 @@ static void ssb_pmu_pll_init(struct ssb_ + if (bus->bustype == SSB_BUSTYPE_SSB) { + #ifdef CONFIG_BCM47XX + char buf[20]; +- if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ if (bcm47xx_nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) + crystalfreq = simple_strtoul(buf, NULL, 0); + #endif + } +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -98,14 +98,14 @@ static inline bool ssb_gige_must_flush_p + } + + #ifdef CONFIG_BCM47XX +-#include ++#include + /* Get the device MAC address */ + static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) + { + char buf[20]; +- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) ++ if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) + return; +- nvram_parse_macaddr(buf, macaddr); ++ bcm47xx_nvram_parse_macaddr(buf, macaddr); + } + #else + static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) diff --git a/target/linux/brcm47xx/patches-3.8/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.8/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch new file mode 100644 index 0000000000..5e324e473b --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch @@ -0,0 +1,69 @@ +From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 18 Jul 2010 14:59:24 +0200 +Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early + +Swap the first and second serial if console=ttyS1 was set. +Set it up and register it for early serial support. + +This patch has been in OpenWRT for a long time. + +Signed-off-by: Hauke Mehrtens +--- + arch/mips/bcm47xx/setup.c | 39 ++++++++++++++++++++++++++++++++++++++- + 1 files changed, 38 insertions(+), 1 deletions(-) + +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -31,6 +31,8 @@ + #include + #include + #include ++#include ++#include + #include + #include + #include +@@ -121,6 +123,31 @@ static int bcm47xx_get_invariants(struct + return 0; + } + ++#ifdef CONFIG_SERIAL_8250 ++static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore) ++{ ++ int i; ++ ++ for (i = 0; i < mcore->nr_serial_ports; i++) { ++ struct ssb_serial_port *port = &(mcore->serial_ports[i]); ++ struct uart_port s; ++ ++ memset(&s, 0, sizeof(s)); ++ s.line = i; ++ s.mapbase = (unsigned int) port->regs; ++ s.membase = port->regs; ++ s.irq = port->irq + 2; ++ s.uartclk = port->baud_base; ++ s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; ++ s.iotype = SERIAL_IO_MEM; ++ s.regshift = port->reg_shift; ++ ++ early_serial_setup(&s); ++ } ++ printk(KERN_DEBUG "Serial init done.\n"); ++} ++#endif ++ + static void __init bcm47xx_register_ssb(void) + { + int err; +@@ -150,6 +177,10 @@ static void __init bcm47xx_register_ssb( + memcpy(&mcore->serial_ports[1], &port, sizeof(port)); + } + } ++ ++#ifdef CONFIG_SERIAL_8250 ++ bcm47xx_early_serial_setup(mcore); ++#endif + } + #endif + diff --git a/target/linux/brcm47xx/patches-3.8/116-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.8/116-MIPS-BCM47xx-Remove-CFE-console.patch new file mode 100644 index 0000000000..a06edd4a7a --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/116-MIPS-BCM47xx-Remove-CFE-console.patch @@ -0,0 +1,141 @@ +From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 18 Jul 2010 15:11:26 +0200 +Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console + +Do not use the CFE console. It causes hangs on some devices like the +Buffalo WHR-HP-G54. +This was reported in https://dev.openwrt.org/ticket/4061 and +https://forum.openwrt.org/viewtopic.php?id=17063 + +Signed-off-by: Hauke Mehrtens +--- + arch/mips/Kconfig | 1 - + arch/mips/bcm47xx/prom.c | 82 +++------------------------------------------ + 2 files changed, 6 insertions(+), 77 deletions(-) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -115,7 +115,6 @@ config BCM47XX + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN +- select SYS_HAS_EARLY_PRINTK + help + Support for BCM47XX based boards + +--- a/arch/mips/bcm47xx/prom.c ++++ b/arch/mips/bcm47xx/prom.c +@@ -33,96 +33,28 @@ + #include + #include + +-static int cfe_cons_handle; +- + const char *get_system_type(void) + { + return "Broadcom BCM47XX"; + } + +-void prom_putchar(char c) +-{ +- while (cfe_write(cfe_cons_handle, &c, 1) == 0) +- ; +-} +- +-static __init void prom_init_cfe(void) ++static __init int prom_init_cfe(void) + { + uint32_t cfe_ept; + uint32_t cfe_handle; + uint32_t cfe_eptseal; +- int argc = fw_arg0; +- char **envp = (char **) fw_arg2; +- int *prom_vec = (int *) fw_arg3; +- +- /* +- * Check if a loader was used; if NOT, the 4 arguments are +- * what CFE gives us (handle, 0, EPT and EPTSEAL) +- */ +- if (argc < 0) { +- cfe_handle = (uint32_t)argc; +- cfe_ept = (uint32_t)envp; +- cfe_eptseal = (uint32_t)prom_vec; +- } else { +- if ((int)prom_vec < 0) { +- /* +- * Old loader; all it gives us is the handle, +- * so use the "known" entrypoint and assume +- * the seal. +- */ +- cfe_handle = (uint32_t)prom_vec; +- cfe_ept = 0xBFC00500; +- cfe_eptseal = CFE_EPTSEAL; +- } else { +- /* +- * Newer loaders bundle the handle/ept/eptseal +- * Note: prom_vec is in the loader's useg +- * which is still alive in the TLB. +- */ +- cfe_handle = prom_vec[0]; +- cfe_ept = prom_vec[2]; +- cfe_eptseal = prom_vec[3]; +- } +- } ++ ++ cfe_eptseal = (uint32_t) fw_arg3; ++ cfe_handle = (uint32_t) fw_arg0; ++ cfe_ept = (uint32_t) fw_arg2; + + if (cfe_eptseal != CFE_EPTSEAL) { +- /* too early for panic to do any good */ + printk(KERN_ERR "CFE's entrypoint seal doesn't match."); +- while (1) ; ++ return -1; + } + + cfe_init(cfe_handle, cfe_ept); +-} +- +-static __init void prom_init_console(void) +-{ +- /* Initialize CFE console */ +- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); +-} +- +-static __init void prom_init_cmdline(void) +-{ +- static char buf[COMMAND_LINE_SIZE] __initdata; +- +- /* Get the kernel command line from CFE */ +- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) { +- buf[COMMAND_LINE_SIZE - 1] = 0; +- strcpy(arcs_cmdline, buf); +- } +- +- /* Force a console handover by adding a console= argument if needed, +- * as CFE is not available anymore later in the boot process. */ +- if ((strstr(arcs_cmdline, "console=")) == NULL) { +- /* Try to read the default serial port used by CFE */ +- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0) +- || (strncmp("uart", buf, 4))) +- /* Default to uart0 */ +- strcpy(buf, "uart0"); +- +- /* Compute the new command line */ +- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200", +- arcs_cmdline, buf[4]); +- } ++ return 0; + } + + static __init void prom_init_mem(void) +@@ -173,8 +105,6 @@ static __init void prom_init_mem(void) + void __init prom_init(void) + { + prom_init_cfe(); +- prom_init_console(); +- prom_init_cmdline(); + prom_init_mem(); + } + diff --git a/target/linux/brcm47xx/patches-3.8/119-fix-boot.patch b/target/linux/brcm47xx/patches-3.8/119-fix-boot.patch new file mode 100644 index 0000000000..9834b61d9d --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/119-fix-boot.patch @@ -0,0 +1,17 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -107,12 +107,14 @@ config ATH79 + config BCM47XX + bool "Broadcom BCM47XX based boards" + select ARCH_WANT_OPTIONAL_GPIOLIB ++ select BOOT_RAW + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select FW_CFE + select HW_HAS_PCI + select IRQ_CPU ++ select NO_EXCEPT_FILL + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + help diff --git a/target/linux/brcm47xx/patches-3.8/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.8/150-cpu_fixes.patch new file mode 100644 index 0000000000..d07b54cfc2 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/150-cpu_fixes.patch @@ -0,0 +1,368 @@ +--- a/arch/mips/include/asm/r4kcache.h ++++ b/arch/mips/include/asm/r4kcache.h +@@ -17,6 +17,20 @@ + #include + #include + ++#ifdef CONFIG_BCM47XX ++#include ++#include ++#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE))) ++ ++#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) ++#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) ++#else ++#define BCM4710_DUMMY_RREG() ++ ++#define BCM4710_FILL_TLB(addr) ++#define BCM4710_PROTECTED_FILL_TLB(addr) ++#endif ++ + /* + * This macro return a properly sign-extended address suitable as base address + * for indexed cache operations. Two issues here: +@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind + static inline void flush_dcache_line_indexed(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Index_Writeback_Inv_D, addr); + __dflush_epilogue + } +@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns + static inline void flush_dcache_line(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Hit_Writeback_Inv_D, addr); + __dflush_epilogue + } +@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns + static inline void invalidate_dcache_line(unsigned long addr) + { + __dflush_prologue ++ BCM4710_DUMMY_RREG(); + cache_op(Hit_Invalidate_D, addr); + __dflush_epilogue + } +@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns + */ + static inline void protected_flush_icache_line(unsigned long addr) + { ++ BCM4710_DUMMY_RREG(); + protected_cache_op(Hit_Invalidate_I, addr); + } + +@@ -219,6 +237,7 @@ static inline void protected_flush_icach + */ + static inline void protected_writeback_dcache_line(unsigned long addr) + { ++ BCM4710_DUMMY_RREG(); + protected_cache_op(Hit_Writeback_Inv_D, addr); + } + +@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag + : "r" (base), \ + "i" (op)); + ++static inline void blast_dcache(void) ++{ ++ unsigned long start = KSEG0; ++ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; ++ unsigned long end = (start + dcache_size); ++ ++ do { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Index_Writeback_Inv_D, start); ++ start += current_cpu_data.dcache.linesz; ++ } while(start < end); ++} ++ ++static inline void blast_dcache_page(unsigned long page) ++{ ++ unsigned long start = page; ++ unsigned long end = start + PAGE_SIZE; ++ ++ BCM4710_FILL_TLB(start); ++ do { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Hit_Writeback_Inv_D, start); ++ start += current_cpu_data.dcache.linesz; ++ } while(start < end); ++} ++ ++static inline void blast_dcache_page_indexed(unsigned long page) ++{ ++ unsigned long start = page; ++ unsigned long end = start + PAGE_SIZE; ++ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; ++ unsigned long ws_end = current_cpu_data.dcache.ways << ++ current_cpu_data.dcache.waybit; ++ unsigned long ws, addr; ++ for (ws = 0; ws < ws_end; ws += ws_inc) { ++ start = page + ws; ++ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { ++ BCM4710_DUMMY_RREG(); ++ cache_op(Index_Writeback_Inv_D, addr); ++ } ++ } ++} ++ ++ + /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ +-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ ++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \ + static inline void blast_##pfx##cache##lsize(void) \ + { \ + unsigned long start = INDEX_BASE; \ +@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l + \ + __##pfx##flush_prologue \ + \ ++ war \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ + for (addr = start; addr < end; addr += lsize * 32) \ + cache##lsize##_unroll32(addr|ws, indexop); \ +@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l + \ + __##pfx##flush_prologue \ + \ ++ war \ + do { \ + cache##lsize##_unroll32(start, hitop); \ + start += lsize * 32; \ +@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l + current_cpu_data.desc.waybit; \ + unsigned long ws, addr; \ + \ ++ war \ ++ \ + __##pfx##flush_prologue \ + \ + for (ws = 0; ws < ws_end; ws += ws_inc) \ +@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l + __##pfx##flush_epilogue \ + } + +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) +-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64) +-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) +-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) +- +-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) +-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) +-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) ++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, ) ++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) ++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) ++ ++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, ) ++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, ) ++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, ) + + /* build blast_xxx_range, protected_blast_xxx_range */ +-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ ++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \ + static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ + unsigned long end) \ + { \ + unsigned long lsize = cpu_##desc##_line_size(); \ + unsigned long addr = start & ~(lsize - 1); \ + unsigned long aend = (end - 1) & ~(lsize - 1); \ ++ war \ + \ + __##pfx##flush_prologue \ + \ + while (1) { \ ++ war2 \ + prot##cache_op(hitop, addr); \ + if (addr == aend) \ + break; \ +@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca + __##pfx##flush_epilogue \ + } + +-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) +-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) +-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) +-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) +-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) ++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, ) ++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, ) ++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, ) + /* blast_inv_dcache_range */ +-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) +-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) ++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();) ++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, ) + + #endif /* _ASM_R4KCACHE_H */ +--- a/arch/mips/include/asm/stackframe.h ++++ b/arch/mips/include/asm/stackframe.h +@@ -449,6 +449,10 @@ + .macro RESTORE_SP_AND_RET + LONG_L sp, PT_R29(sp) + .set mips3 ++#ifdef CONFIG_BCM47XX ++ nop ++ nop ++#endif + eret + .set mips0 + .endm +--- a/arch/mips/kernel/genex.S ++++ b/arch/mips/kernel/genex.S +@@ -51,6 +51,10 @@ NESTED(except_vec1_generic, 0, sp) + NESTED(except_vec3_generic, 0, sp) + .set push + .set noat ++#ifdef CONFIG_BCM47XX ++ nop ++ nop ++#endif + #if R5432_CP0_INTERRUPT_WAR + mfc0 k0, CP0_INDEX + #endif +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -34,6 +34,9 @@ + #include /* for run_uncached() */ + #include + ++/* For enabling BCM4710 cache workarounds */ ++int bcm4710 = 0; ++ + /* + * Special Variant of smp_call_function for use by cache functions: + * +@@ -110,6 +113,9 @@ static void __cpuinit r4k_blast_dcache_p + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache_page = blast_dcache_page; ++ else + if (dc_lsize == 0) + r4k_blast_dcache_page = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -126,6 +132,9 @@ static void __cpuinit r4k_blast_dcache_p + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; ++ else + if (dc_lsize == 0) + r4k_blast_dcache_page_indexed = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -142,6 +151,9 @@ static void __cpuinit r4k_blast_dcache_s + { + unsigned long dc_lsize = cpu_dcache_line_size(); + ++ if (bcm4710) ++ r4k_blast_dcache = blast_dcache; ++ else + if (dc_lsize == 0) + r4k_blast_dcache = (void *)cache_noop; + else if (dc_lsize == 16) +@@ -671,6 +683,8 @@ static void local_r4k_flush_cache_sigtra + unsigned long addr = (unsigned long) arg; + + R4600_HIT_CACHEOP_WAR_IMPL; ++ BCM4710_PROTECTED_FILL_TLB(addr); ++ BCM4710_PROTECTED_FILL_TLB(addr + 4); + if (dc_lsize) + protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); + if (!cpu_icache_snoops_remote_store && scache_size) +@@ -1355,6 +1369,17 @@ static void __cpuinit coherency_setup(vo + * silly idea of putting something else there ... + */ + switch (current_cpu_type()) { ++ case CPU_BMIPS3300: ++ { ++ u32 cm; ++ cm = read_c0_diag(); ++ /* Enable icache */ ++ cm |= (1 << 31); ++ /* Enable dcache */ ++ cm |= (1 << 30); ++ write_c0_diag(cm); ++ } ++ break; + case CPU_R4000PC: + case CPU_R4000SC: + case CPU_R4000MC: +@@ -1416,6 +1441,15 @@ void __cpuinit r4k_cache_init(void) + extern void build_copy_page(void); + struct cpuinfo_mips *c = ¤t_cpu_data; + ++ /* Check if special workarounds are required */ ++#ifdef CONFIG_BCM47XX ++ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) { ++ printk("Enabling BCM4710A0 cache workarounds.\n"); ++ bcm4710 = 1; ++ } else ++#endif ++ bcm4710 = 0; ++ + probe_pcache(); + setup_scache(); + +@@ -1476,6 +1510,14 @@ void __cpuinit r4k_cache_init(void) + #if !defined(CONFIG_MIPS_CMP) + local_r4k___flush_cache_all(NULL); + #endif ++#ifdef CONFIG_BCM47XX ++ { ++ static void (*_coherency_setup)(void); ++ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup); ++ _coherency_setup(); ++ } ++#else + coherency_setup(); ++#endif + board_cache_error_setup = r4k_cache_error_setup; + } +--- a/arch/mips/mm/tlbex.c ++++ b/arch/mips/mm/tlbex.c +@@ -1314,6 +1314,9 @@ static void __cpuinit build_r4000_tlb_re + /* No need for uasm_i_nop */ + } + ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++#endif + #ifdef CONFIG_64BIT + build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ + #else +@@ -1845,6 +1848,9 @@ build_r4000_tlbchange_handler_head(u32 * + { + struct work_registers wr = build_get_work_registers(p); + ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + #ifdef CONFIG_64BIT + build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */ + #else diff --git a/target/linux/brcm47xx/patches-3.8/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.8/160-kmap_coherent.patch new file mode 100644 index 0000000000..4469714a47 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/160-kmap_coherent.patch @@ -0,0 +1,77 @@ +--- a/arch/mips/include/asm/cpu-features.h ++++ b/arch/mips/include/asm/cpu-features.h +@@ -110,6 +110,9 @@ + #ifndef cpu_has_pindexed_dcache + #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) + #endif ++#ifndef cpu_use_kmap_coherent ++#define cpu_use_kmap_coherent 1 ++#endif + + /* + * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors +--- /dev/null ++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h +@@ -0,0 +1,13 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) ++ */ ++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_use_kmap_coherent 0 ++ ++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */ +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -506,7 +506,7 @@ static inline void local_r4k_flush_cache + */ + map_coherent = (cpu_has_dc_aliases && + page_mapped(page) && !Page_dcache_dirty(page)); +- if (map_coherent) ++ if (map_coherent && cpu_use_kmap_coherent) + vaddr = kmap_coherent(page, addr); + else + vaddr = kmap_atomic(page); +@@ -529,7 +529,7 @@ static inline void local_r4k_flush_cache + } + + if (vaddr) { +- if (map_coherent) ++ if (map_coherent && cpu_use_kmap_coherent) + kunmap_coherent(); + else + kunmap_atomic(vaddr); +--- a/arch/mips/mm/init.c ++++ b/arch/mips/mm/init.c +@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to, + void *vfrom, *vto; + + vto = kmap_atomic(to); +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapped(from) && !Page_dcache_dirty(from)) { + vfrom = kmap_coherent(from, vaddr); + copy_page(vto, vfrom); +@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) + { +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapped(page) && !Page_dcache_dirty(page)) { + void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(vto, src, len); +@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_ + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) + { +- if (cpu_has_dc_aliases && ++ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && + page_mapped(page) && !Page_dcache_dirty(page)) { + void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(dst, vfrom, len); diff --git a/target/linux/brcm47xx/patches-3.8/170-fix-74k-cpu.patch b/target/linux/brcm47xx/patches-3.8/170-fix-74k-cpu.patch new file mode 100644 index 0000000000..a757ec7441 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/170-fix-74k-cpu.patch @@ -0,0 +1,12 @@ +--- a/arch/mips/kernel/cpu-probe.c ++++ b/arch/mips/kernel/cpu-probe.c +@@ -210,9 +210,6 @@ void __init check_wait(void) + break; + + case CPU_74K: +- cpu_wait = r4k_wait; +- if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) +- cpu_wait = r4k_wait_irqoff; + break; + + case CPU_TX49XX: diff --git a/target/linux/brcm47xx/patches-3.8/200-MIPS-BCM47XX-use-fallback-for-some-board.patch b/target/linux/brcm47xx/patches-3.8/200-MIPS-BCM47XX-use-fallback-for-some-board.patch new file mode 100644 index 0000000000..5d759f1ab6 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/200-MIPS-BCM47XX-use-fallback-for-some-board.patch @@ -0,0 +1,17 @@ +--- a/arch/mips/bcm47xx/sprom.c ++++ b/arch/mips/bcm47xx/sprom.c +@@ -652,12 +652,10 @@ static void bcm47xx_fill_sprom_ethernet( + static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix, + bool fallback) + { +- nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0, +- fallback); ++ nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0, true); + nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0, + fallback); +- nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0, +- fallback); ++ nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0, true); + nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo, + &sprom->boardflags_hi, fallback); + nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo, diff --git a/target/linux/brcm47xx/patches-3.8/201-MIPS-BCM47XX-trim-the-nvram-values-for-parsing.patch b/target/linux/brcm47xx/patches-3.8/201-MIPS-BCM47XX-trim-the-nvram-values-for-parsing.patch new file mode 100644 index 0000000000..417e1408da --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/201-MIPS-BCM47XX-trim-the-nvram-values-for-parsing.patch @@ -0,0 +1,29 @@ +--- a/arch/mips/bcm47xx/sprom.c ++++ b/arch/mips/bcm47xx/sprom.c +@@ -71,7 +71,7 @@ static void nvram_read_ ## type (const c + fallback); \ + if (err < 0) \ + return; \ +- err = kstrto ## type (buf, 0, &var); \ ++ err = kstrto ## type(strim(buf), 0, &var); \ + if (err) { \ + pr_warn("can not parse nvram name %s%s%s with value %s got %i\n", \ + prefix, name, postfix, buf, err); \ +@@ -99,7 +99,7 @@ static void nvram_read_u32_2(const char + err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); + if (err < 0) + return; +- err = kstrtou32(buf, 0, &val); ++ err = kstrtou32(strim(buf), 0, &val); + if (err) { + pr_warn("can not parse nvram name %s%s with value %s got %i\n", + prefix, name, buf, err); +@@ -120,7 +120,7 @@ static void nvram_read_leddc(const char + err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); + if (err < 0) + return; +- err = kstrtou32(buf, 0, &val); ++ err = kstrtou32(strim(buf), 0, &val); + if (err) { + pr_warn("can not parse nvram name %s%s with value %s got %i\n", + prefix, name, buf, err); diff --git a/target/linux/brcm47xx/patches-3.8/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.8/210-b44_phy_fix.patch new file mode 100644 index 0000000000..113e1fb4b1 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/210-b44_phy_fix.patch @@ -0,0 +1,54 @@ +--- a/drivers/net/ethernet/broadcom/b44.c ++++ b/drivers/net/ethernet/broadcom/b44.c +@@ -410,10 +410,34 @@ static void b44_wap54g10_workaround(stru + error: + pr_warning("PHY: cannot reset MII transceiver isolate bit\n"); + } ++ ++static void b44_bcm47xx_workarounds(struct b44 *bp) ++{ ++ char buf[20]; ++ struct ssb_device *sdev = bp->sdev; ++ ++ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */ ++ if (sdev->bus->sprom.board_num == 100) { ++ bp->phy_addr = B44_PHY_ADDR_NO_PHY; ++ } else { ++ /* WL-HDD */ ++ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 && ++ !strncmp(buf, "WL300-", strlen("WL300-"))) { ++ if (sdev->bus->sprom.et0phyaddr == 0 && ++ sdev->bus->sprom.et1phyaddr == 1) ++ bp->phy_addr = B44_PHY_ADDR_NO_PHY; ++ } ++ } ++ return; ++} + #else + static inline void b44_wap54g10_workaround(struct b44 *bp) + { + } ++ ++static inline void b44_bcm47xx_workarounds(struct b44 *bp) ++{ ++} + #endif + + static int b44_setup_phy(struct b44 *bp) +@@ -422,6 +446,7 @@ static int b44_setup_phy(struct b44 *bp) + int err; + + b44_wap54g10_workaround(bp); ++ b44_bcm47xx_workarounds(bp); + + if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) + return 0; +@@ -2104,6 +2129,8 @@ static int b44_get_invariants(struct b44 + * valid PHY address. */ + bp->phy_addr &= 0x1F; + ++ b44_bcm47xx_workarounds(bp); ++ + memcpy(bp->dev->dev_addr, addr, 6); + + if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){ diff --git a/target/linux/brcm47xx/patches-3.8/211-b44_timeout_spam.patch b/target/linux/brcm47xx/patches-3.8/211-b44_timeout_spam.patch new file mode 100644 index 0000000000..c2eb3ad90b --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/211-b44_timeout_spam.patch @@ -0,0 +1,15 @@ +--- a/drivers/net/ethernet/broadcom/b44.c ++++ b/drivers/net/ethernet/broadcom/b44.c +@@ -187,10 +187,11 @@ static int b44_wait_bit(struct b44 *bp, + udelay(10); + } + if (i == timeout) { ++#if 0 + if (net_ratelimit()) + netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n", + bit, reg, clear ? "clear" : "set"); +- ++#endif + return -ENODEV; + } + return 0; diff --git a/target/linux/brcm47xx/patches-3.8/241-bcma-broadcom-2011-sdk-updates.patch b/target/linux/brcm47xx/patches-3.8/241-bcma-broadcom-2011-sdk-updates.patch new file mode 100644 index 0000000000..72b02088c6 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/241-bcma-broadcom-2011-sdk-updates.patch @@ -0,0 +1,10 @@ +--- a/drivers/bcma/core.c ++++ b/drivers/bcma/core.c +@@ -43,6 +43,7 @@ int bcma_core_enable(struct bcma_device + bcma_aread32(core, BCMA_IOCTL); + + bcma_awrite32(core, BCMA_RESET_CTL, 0); ++ bcma_aread32(core, BCMA_RESET_CTL); + udelay(1); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); diff --git a/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch b/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch new file mode 100644 index 0000000000..6edbaed533 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch @@ -0,0 +1,322 @@ +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -4,4 +4,5 @@ + # + + obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o ++obj-y += board.o + obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o +--- /dev/null ++++ b/arch/mips/bcm47xx/board.c +@@ -0,0 +1,219 @@ ++#include ++#include ++#include ++#include ++ ++struct bcm47xx_board_type { ++ const enum bcm47xx_board board; ++ const char *name; ++}; ++ ++struct bcm47xx_board_type_list { ++ struct bcm47xx_board_type board; ++ const char *value1; ++ const char *value2; ++}; ++ ++static const struct bcm47xx_board_type *bcm47xx_board = NULL; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_model_name[] = { ++ {{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130",}, ++ {{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330",}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_model_no[] = { ++ {{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700",}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_hardware_version[] = { ++ {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-",}, ++ {{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-",}, ++ {{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-",}, ++ {{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-",}, ++ {{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-",}, ++ {{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-",}, ++ {{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301",}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_productid[] = { ++ {{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U",}, ++ {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D",}, ++ {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U",}, ++ {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12",}, ++ {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1",}, ++ {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1",}, ++ {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1",}, ++ {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP",}, ++ {{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U",}, ++ {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16",}, ++ {{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53",}, ++ {{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U",}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_ModelId[] = { ++ {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565",}, ++ {{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G",}, ++ {{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP",}, ++ {{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G",}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_melco_id[] = { ++ {{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332",}, ++ {{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd",}, ++ {{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093",}, ++ {{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182",}, ++ {{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189",}, ++ {{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129",}, ++ {{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120",}, ++ {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083",}, ++ {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103",}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_boot_hw[] = { ++ {{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"}, /* like WRT160N v3.0 */ ++ {{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"}, /* like WRT310N v2.0 */ ++ {{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"}, /* like WRT160N v3.0 */ ++ {{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"}, ++ {{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"}, ++ {{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"}, /* like WRT610N v2.0 */ ++ {{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"}, ++ {{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"}, ++ {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type_list bcm47xx_board_list_board_id[] = { ++ {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNDR4500, "Netgear WNDR4500"}, "U12H189T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR",}, ++ {{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR",}, ++ { {0}, 0}, ++}; ++ ++static const struct bcm47xx_board_type bcm47xx_board_unknown[] = { ++ {BCM47XX_BOARD_UNKNOWN, "Unknown Board"}, ++}; ++ ++static inline int startswith(char *source, char *cmp) ++{ ++ return !strncmp(source, cmp, strlen(cmp)); ++} ++ ++static const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void) ++{ ++ char buf1[30]; ++ char buf2[30]; ++ const struct bcm47xx_board_type_list *e; ++ ++ if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) { ++ for (e = bcm47xx_board_list_model_name; e->value1; e++) { ++ if (!strcmp(buf1, e->value1)) ++ return &e->board; ++ } ++ } ++ ++ if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) { ++ for (e = bcm47xx_board_list_model_no; e->value1; e++) { ++ if (strstarts(buf1, e->value1)) ++ return &e->board; ++ } ++ } ++ ++ if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) { ++ for (e = bcm47xx_board_list_hardware_version; e->value1; e++) { ++ if (strstarts(buf1, e->value1)) ++ return &e->board; ++ } ++ } ++ ++ if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) { ++ for (e = bcm47xx_board_list_productid; e->value1; e++) { ++ if (!strcmp(buf1, e->value1)) ++ return &e->board; ++ } ++ } ++ ++ if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) { ++ for (e = bcm47xx_board_list_ModelId; e->value1; e++) { ++ if (!strcmp(buf1, e->value1)) ++ return &e->board; ++ } ++ } ++ ++ if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 || ++ bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) { ++ /* buffalo hardware, check id for specific hardware matches */ ++ for (e = bcm47xx_board_list_melco_id; e->value1; e++) { ++ if (!strcmp(buf1, e->value1)) ++ return &e->board; ++ } ++ } ++ ++ if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 && ++ bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) { ++ for (e = bcm47xx_board_list_boot_hw; e->value1; e++) { ++ if (!strcmp(buf1, e->value1) && !strcmp(buf2, e->value2)) ++ return &e->board; ++ } ++ } ++ ++ if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) { ++ for (e = bcm47xx_board_list_board_id; e->value1; e++) { ++ if (!strcmp(buf1, e->value1)) ++ return &e->board; ++ } ++ } ++ return bcm47xx_board_unknown; ++} ++ ++static void bcm47xx_board_detect(void) ++{ ++ char buf[15]; ++ ++ if (bcm47xx_board != NULL) ++ return; ++ /* check if the nvram is available */ ++ if (bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf)) == -ENXIO) ++ return; ++ ++ bcm47xx_board = bcm47xx_board_get_nvram(); ++ pr_info("Found board: \"%s\"\n", bcm47xx_board->name); ++} ++ ++enum bcm47xx_board bcm47xx_board_get(void) ++{ ++ bcm47xx_board_detect(); ++ return bcm47xx_board->board; ++} ++EXPORT_SYMBOL(bcm47xx_board_get); ++ ++const char *bcm47xx_board_get_name(void) ++{ ++ bcm47xx_board_detect(); ++ return bcm47xx_board->name; ++} ++EXPORT_SYMBOL(bcm47xx_board_get_name); +--- /dev/null ++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h +@@ -0,0 +1,89 @@ ++#ifndef __BCM47XX_BOARD_H ++#define __BCM47XX_BOARD_H ++ ++enum bcm47xx_board { ++ BCM47XX_BOARD_ASUS_RTAC66U, ++ BCM47XX_BOARD_ASUS_RTN10D, ++ BCM47XX_BOARD_ASUS_RTN10U, ++ BCM47XX_BOARD_ASUS_RTN12, ++ BCM47XX_BOARD_ASUS_RTN12B1, ++ BCM47XX_BOARD_ASUS_RTN12C1, ++ BCM47XX_BOARD_ASUS_RTN12D1, ++ BCM47XX_BOARD_ASUS_RTN12HP, ++ BCM47XX_BOARD_ASUS_RTN15U, ++ BCM47XX_BOARD_ASUS_RTN16, ++ BCM47XX_BOARD_ASUS_RTN53, ++ BCM47XX_BOARD_ASUS_RTN66U, ++ BCM47XX_BOARD_ASUS_WL330GE, ++ BCM47XX_BOARD_ASUS_WL500GPV1, ++ BCM47XX_BOARD_ASUS_WL500GPV2, ++ BCM47XX_BOARD_ASUS_WL520GC, ++ BCM47XX_BOARD_ASUS_WL520GU, ++ BCM47XX_BOARD_ASUS_WL700GE, ++ ++ BCM47XX_BOARD_BELKIN_F7D4301, ++ ++ BCM47XX_BOARD_BUFFALO_WBR2_G54, ++ BCM47XX_BOARD_BUFFALO_WHR2_A54G54, ++ BCM47XX_BOARD_BUFFALO_WHR_G125, ++ BCM47XX_BOARD_BUFFALO_WHR_G54S, ++ BCM47XX_BOARD_BUFFALO_WHR_HP_G54, ++ BCM47XX_BOARD_BUFFALO_WLA2_G54L, ++ BCM47XX_BOARD_BUFFALO_WZR_G300N, ++ BCM47XX_BOARD_BUFFALO_WZR_RS_G54, ++ BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, ++ ++ BCM47XX_BOARD_CISCO_M10V1, ++ BCM47XX_BOARD_CISCO_M20V1, ++ ++ BCM47XX_BOARD_DELL_TM2300, ++ ++ BCM47XX_BOARD_DLINK_DIR130, ++ BCM47XX_BOARD_DLINK_DIR330, ++ ++ BCM47XX_BOARD_LINKSYS_E1000V1, ++ BCM47XX_BOARD_LINKSYS_E1000V2, ++ BCM47XX_BOARD_LINKSYS_E2000V1, ++ BCM47XX_BOARD_LINKSYS_E3000V1, ++ BCM47XX_BOARD_LINKSYS_E3200V1, ++ BCM47XX_BOARD_LINKSYS_E4200V1, ++ BCM47XX_BOARD_LINKSYS_WRT150NV1, ++ BCM47XX_BOARD_LINKSYS_WRT150NV11, ++ BCM47XX_BOARD_LINKSYS_WRT160NV1, ++ BCM47XX_BOARD_LINKSYS_WRT160NV3, ++ BCM47XX_BOARD_LINKSYS_WRT300NV11, ++ BCM47XX_BOARD_LINKSYS_WRT310NV2, ++ BCM47XX_BOARD_LINKSYS_WRT54G3GV2, ++ BCM47XX_BOARD_LINKSYS_WRT610NV1, ++ BCM47XX_BOARD_LINKSYS_WRT610NV2, ++ ++ BCM47XX_BOARD_MOTOROLA_WE800G, ++ BCM47XX_BOARD_MOTOROLA_WR850GP, ++ BCM47XX_BOARD_MOTOROLA_WR850GV2V3, ++ ++ BCM47XX_BOARD_NETGEAR_WGR614V8, ++ BCM47XX_BOARD_NETGEAR_WGR614V9, ++ BCM47XX_BOARD_NETGEAR_WNDR3300, ++ BCM47XX_BOARD_NETGEAR_WNDR3400V1, ++ BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, ++ BCM47XX_BOARD_NETGEAR_WNDR3700V3, ++ BCM47XX_BOARD_NETGEAR_WNDR4000, ++ BCM47XX_BOARD_NETGEAR_WNDR4500, ++ BCM47XX_BOARD_NETGEAR_WNR2000, ++ BCM47XX_BOARD_NETGEAR_WNR3500L, ++ BCM47XX_BOARD_NETGEAR_WNR3500U, ++ BCM47XX_BOARD_NETGEAR_WNR3500V2, ++ BCM47XX_BOARD_NETGEAR_WNR3500V2VC, ++ BCM47XX_BOARD_NETGEAR_WNR834BV2, ++ ++ /* TODO */ ++ BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE, ++ ++ BCM47XX_BOARD_UNKNOWN, ++ BCM47XX_BOARD_NON, ++}; ++ ++extern enum bcm47xx_board bcm47xx_board_get(void); ++extern const char *bcm47xx_board_get_name(void); ++ ++#endif /* __BCM47XX_BOARD_H */ diff --git a/target/linux/brcm47xx/patches-3.8/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch b/target/linux/brcm47xx/patches-3.8/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch new file mode 100644 index 0000000000..abfa4004f2 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/bcm47xx/prom.c ++++ b/arch/mips/bcm47xx/prom.c +@@ -32,10 +32,35 @@ + #include + #include + #include ++#include ++#include ++ ++static u16 get_chip_id(void) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return bcm47xx_bus.ssb.chip_id; ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return bcm47xx_bus.bcma.bus.chipinfo.id; ++#endif ++ } ++ return 0; ++} + + const char *get_system_type(void) + { +- return "Broadcom BCM47XX"; ++ static char buf[128]; ++ u16 chip_id = get_chip_id(); ++ ++ snprintf(buf, sizeof(buf), ++ (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" : ++ "Broadcom BCM%04X (%s)", ++ chip_id, bcm47xx_board_get_name()); ++ ++ return buf; + } + + static __init int prom_init_cfe(void) diff --git a/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch b/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch new file mode 100644 index 0000000000..0a4dd62487 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch @@ -0,0 +1,18 @@ +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -26,6 +26,7 @@ struct ssb_sprom_core_pwr_info { + + struct ssb_sprom { + u8 revision; ++ u8 country_code; /* Country Code */ + u8 il0mac[6]; /* MAC address for 802.11b/g */ + u8 et0mac[6]; /* MAC address for Ethernet */ + u8 et1mac[6]; /* MAC address for 802.11a */ +@@ -36,7 +37,6 @@ struct ssb_sprom { + u16 board_rev; /* Board revision number from SPROM. */ + u16 board_num; /* Board number from SPROM. */ + u16 board_type; /* Board type from SPROM. */ +- u8 country_code; /* Country Code */ + char alpha2[2]; /* Country Code as two chars like EU or US */ + u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ + u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ diff --git a/target/linux/brcm47xx/patches-3.8/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.8/280-activate_ssb_support_in_usb.patch new file mode 100644 index 0000000000..c4382ed514 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/280-activate_ssb_support_in_usb.patch @@ -0,0 +1,25 @@ +This prevents the options from being delete with make kernel_oldconfig. +--- + drivers/ssb/Kconfig | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE + config BCMA_HOST_SOC + bool + depends on BCMA_DRIVER_MIPS ++ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD + + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -146,6 +146,7 @@ config SSB_SFLASH + config SSB_EMBEDDED + bool + depends on SSB_DRIVER_MIPS ++ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD + default y + + config SSB_DRIVER_EXTIF diff --git a/target/linux/brcm47xx/patches-3.8/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.8/300-fork_cacheflush.patch new file mode 100644 index 0000000000..686fb1b945 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/300-fork_cacheflush.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/include/asm/cacheflush.h ++++ b/arch/mips/include/asm/cacheflush.h +@@ -32,7 +32,7 @@ + extern void (*flush_cache_all)(void); + extern void (*__flush_cache_all)(void); + extern void (*flush_cache_mm)(struct mm_struct *mm); +-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) ++#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + extern void (*flush_cache_range)(struct vm_area_struct *vma, + unsigned long start, unsigned long end); + extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/target/linux/brcm47xx/patches-3.8/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.8/310-no_highpage.patch new file mode 100644 index 0000000000..7f1889eda2 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/310-no_highpage.patch @@ -0,0 +1,66 @@ +--- a/arch/mips/include/asm/page.h ++++ b/arch/mips/include/asm/page.h +@@ -46,6 +46,7 @@ + #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */ + + #include ++#include + #include + + extern void build_clear_page(void); +@@ -81,13 +82,16 @@ static inline void clear_user_page(void + flush_data_cache_page((unsigned long)addr); + } + +-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, +- struct page *to); +-struct vm_area_struct; +-extern void copy_user_highpage(struct page *to, struct page *from, +- unsigned long vaddr, struct vm_area_struct *vma); ++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, ++ struct page *to) ++{ ++ extern void (*flush_data_cache_page)(unsigned long addr); + +-#define __HAVE_ARCH_COPY_USER_HIGHPAGE ++ copy_page(vto, vfrom); ++ if (!cpu_has_ic_fills_f_dc || ++ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) ++ flush_data_cache_page((unsigned long)vto); ++} + + /* + * These are used to make use of C type-checking.. +--- a/arch/mips/mm/init.c ++++ b/arch/mips/mm/init.c +@@ -202,30 +202,6 @@ void kunmap_coherent(void) + preempt_check_resched(); + } + +-void copy_user_highpage(struct page *to, struct page *from, +- unsigned long vaddr, struct vm_area_struct *vma) +-{ +- void *vfrom, *vto; +- +- vto = kmap_atomic(to); +- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && +- page_mapped(from) && !Page_dcache_dirty(from)) { +- vfrom = kmap_coherent(from, vaddr); +- copy_page(vto, vfrom); +- kunmap_coherent(); +- } else { +- vfrom = kmap_atomic(from); +- copy_page(vto, vfrom); +- kunmap_atomic(vfrom); +- } +- if ((!cpu_has_ic_fills_f_dc) || +- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) +- flush_data_cache_page((unsigned long)vto); +- kunmap_atomic(vto); +- /* Make sure this page is cleared on other CPU's too before using it */ +- smp_wmb(); +-} +- + void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) diff --git a/target/linux/brcm47xx/patches-3.8/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.8/400-arch-bcm47xx.patch new file mode 100644 index 0000000000..3f8b14dba4 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/400-arch-bcm47xx.patch @@ -0,0 +1,177 @@ +--- a/arch/mips/bcm47xx/nvram.c ++++ b/arch/mips/bcm47xx/nvram.c +@@ -198,3 +198,30 @@ int bcm47xx_nvram_getenv(char *name, cha + return -ENOENT; + } + EXPORT_SYMBOL(bcm47xx_nvram_getenv); ++ ++char *nvram_get(const char *name) ++{ ++ char *var, *value, *end, *eq; ++ ++ if (!name) ++ return NULL; ++ ++ if (!nvram_buf[0]) ++ nvram_init(); ++ ++ /* Look for name=value and return value */ ++ var = &nvram_buf[sizeof(struct nvram_header)]; ++ end = nvram_buf + sizeof(nvram_buf) - 2; ++ end[0] = end[1] = '\0'; ++ for (; *var; var = value + strlen(value) + 1) { ++ eq = strchr(var, '='); ++ if (!eq) ++ break; ++ value = eq + 1; ++ if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) ++ return value; ++ } ++ ++ return NULL; ++} ++EXPORT_SYMBOL(nvram_get); +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -5,4 +5,5 @@ + + obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o + obj-y += board.o ++obj-y += gpio.o + obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o +--- /dev/null ++++ b/arch/mips/bcm47xx/gpio.c +@@ -0,0 +1,119 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2007 Aurelien Jarno ++ * Copyright (C) 2012 Hauke Mehrtens ++ * ++ * Parts of this file are based on Atheros AR71XX/AR724X/AR913X GPIO ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* low level BCM47xx gpio api */ ++u32 bcm47xx_gpio_in(u32 mask) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return ssb_gpio_in(&bcm47xx_bus.ssb, mask); ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, mask); ++#endif ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(bcm47xx_gpio_in); ++ ++u32 bcm47xx_gpio_out(u32 mask, u32 value) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value); ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask, ++ value); ++#endif ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(bcm47xx_gpio_out); ++ ++u32 bcm47xx_gpio_outen(u32 mask, u32 value) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value); ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc, ++ mask, value); ++#endif ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(bcm47xx_gpio_outen); ++ ++u32 bcm47xx_gpio_control(u32 mask, u32 value) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value); ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return bcma_chipco_gpio_control(&bcm47xx_bus.bcma.bus.drv_cc, ++ mask, value); ++#endif ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(bcm47xx_gpio_control); ++ ++u32 bcm47xx_gpio_intmask(u32 mask, u32 value) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value); ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc, ++ mask, value); ++#endif ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(bcm47xx_gpio_intmask); ++ ++u32 bcm47xx_gpio_polarity(u32 mask, u32 value) ++{ ++ switch (bcm47xx_bus_type) { ++#ifdef CONFIG_BCM47XX_SSB ++ case BCM47XX_BUS_TYPE_SSB: ++ return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value); ++#endif ++#ifdef CONFIG_BCM47XX_BCMA ++ case BCM47XX_BUS_TYPE_BCMA: ++ return bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc, ++ mask, value); ++#endif ++ } ++ return -EINVAL; ++} ++EXPORT_SYMBOL(bcm47xx_gpio_polarity); +--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h ++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h +@@ -14,4 +14,11 @@ static inline int irq_to_gpio(unsigned i + return -EINVAL; + } + ++u32 bcm47xx_gpio_in(u32 mask); ++u32 bcm47xx_gpio_out(u32 mask, u32 value); ++u32 bcm47xx_gpio_outen(u32 mask, u32 value); ++u32 bcm47xx_gpio_control(u32 mask, u32 value); ++u32 bcm47xx_gpio_intmask(u32 mask, u32 value); ++u32 bcm47xx_gpio_polarity(u32 mask, u32 value); ++ + #endif diff --git a/target/linux/brcm47xx/patches-3.8/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch b/target/linux/brcm47xx/patches-3.8/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch new file mode 100644 index 0000000000..ff670e87a9 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch @@ -0,0 +1,44 @@ +--- a/arch/mips/bcm47xx/time.c ++++ b/arch/mips/bcm47xx/time.c +@@ -27,10 +27,14 @@ + #include + #include + #include ++#include + + void __init plat_time_init(void) + { + unsigned long hz = 0; ++ u16 chip_id = 0; ++ char buf[10]; ++ int len; + + /* + * Use deterministic values for initial counter interrupt +@@ -43,15 +47,26 @@ void __init plat_time_init(void) + #ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2; ++ chip_id = bcm47xx_bus.ssb.chip_id; + break; + #endif + #ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2; ++ chip_id = bcm47xx_bus.bcma.bus.chipinfo.id; + break; + #endif + } + ++ if (chip_id == 0x5354) { ++ len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf)); ++ if (len >= 0 && !strncmp(buf, "200", 4)) ++ hz = 100000000; ++ len = bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)); ++ if (len >= 0 && !strncmp(buf, "WL520G", 6)) ++ hz = 100000000; ++ ++ } + if (!hz) + hz = 100000000; + diff --git a/target/linux/brcm47xx/patches-3.8/540-watchdog-bcm47xx_wdt.c-convert-to-watchdog-core-api.patch b/target/linux/brcm47xx/patches-3.8/540-watchdog-bcm47xx_wdt.c-convert-to-watchdog-core-api.patch new file mode 100644 index 0000000000..7de4de1b85 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/540-watchdog-bcm47xx_wdt.c-convert-to-watchdog-core-api.patch @@ -0,0 +1,258 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -971,6 +971,7 @@ config ATH79_WDT + config BCM47XX_WDT + tristate "Broadcom BCM47xx Watchdog Timer" + depends on BCM47XX ++ select WATCHDOG_CORE + help + Hardware driver for the Broadcom BCM47xx Watchdog Timer. + +--- a/drivers/watchdog/bcm47xx_wdt.c ++++ b/drivers/watchdog/bcm47xx_wdt.c +@@ -14,15 +14,12 @@ + + #include + #include +-#include + #include + #include +-#include + #include + #include + #include + #include +-#include + #include + #include + #include +@@ -41,15 +38,11 @@ module_param(wdt_time, int, 0); + MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); + +-#ifdef CONFIG_WATCHDOG_NOWAYOUT + module_param(nowayout, bool, 0); + MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +-#endif + +-static unsigned long bcm47xx_wdt_busy; +-static char expect_release; + static struct timer_list wdt_timer; + static atomic_t ticks; + +@@ -97,29 +90,31 @@ static void bcm47xx_timer_tick(unsigned + } + } + +-static inline void bcm47xx_wdt_pet(void) ++static int bcm47xx_wdt_keepalive(struct watchdog_device *wdd) + { + atomic_set(&ticks, wdt_time); ++ ++ return 0; + } + +-static void bcm47xx_wdt_start(void) ++static int bcm47xx_wdt_start(struct watchdog_device *wdd) + { + bcm47xx_wdt_pet(); + bcm47xx_timer_tick(0); ++ ++ return 0; + } + +-static void bcm47xx_wdt_pause(void) ++static int bcm47xx_wdt_stop(struct watchdog_device *wdd) + { + del_timer_sync(&wdt_timer); + bcm47xx_wdt_hw_stop(); +-} + +-static void bcm47xx_wdt_stop(void) +-{ +- bcm47xx_wdt_pause(); ++ return 0; + } + +-static int bcm47xx_wdt_settimeout(int new_time) ++static int bcm47xx_wdt_set_timeout(struct watchdog_device *wdd, ++ unsigned int new_time) + { + if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) + return -EINVAL; +@@ -128,51 +123,6 @@ static int bcm47xx_wdt_settimeout(int ne + return 0; + } + +-static int bcm47xx_wdt_open(struct inode *inode, struct file *file) +-{ +- if (test_and_set_bit(0, &bcm47xx_wdt_busy)) +- return -EBUSY; +- +- bcm47xx_wdt_start(); +- return nonseekable_open(inode, file); +-} +- +-static int bcm47xx_wdt_release(struct inode *inode, struct file *file) +-{ +- if (expect_release == 42) { +- bcm47xx_wdt_stop(); +- } else { +- pr_crit("Unexpected close, not stopping watchdog!\n"); +- bcm47xx_wdt_start(); +- } +- +- clear_bit(0, &bcm47xx_wdt_busy); +- expect_release = 0; +- return 0; +-} +- +-static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data, +- size_t len, loff_t *ppos) +-{ +- if (len) { +- if (!nowayout) { +- size_t i; +- +- expect_release = 0; +- +- for (i = 0; i != len; i++) { +- char c; +- if (get_user(c, data + i)) +- return -EFAULT; +- if (c == 'V') +- expect_release = 42; +- } +- } +- bcm47xx_wdt_pet(); +- } +- return len; +-} +- + static const struct watchdog_info bcm47xx_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | +@@ -180,80 +130,25 @@ static const struct watchdog_info bcm47x + WDIOF_MAGICCLOSE, + }; + +-static long bcm47xx_wdt_ioctl(struct file *file, +- unsigned int cmd, unsigned long arg) +-{ +- void __user *argp = (void __user *)arg; +- int __user *p = argp; +- int new_value, retval = -EINVAL; +- +- switch (cmd) { +- case WDIOC_GETSUPPORT: +- return copy_to_user(argp, &bcm47xx_wdt_info, +- sizeof(bcm47xx_wdt_info)) ? -EFAULT : 0; +- +- case WDIOC_GETSTATUS: +- case WDIOC_GETBOOTSTATUS: +- return put_user(0, p); +- +- case WDIOC_SETOPTIONS: +- if (get_user(new_value, p)) +- return -EFAULT; +- +- if (new_value & WDIOS_DISABLECARD) { +- bcm47xx_wdt_stop(); +- retval = 0; +- } +- +- if (new_value & WDIOS_ENABLECARD) { +- bcm47xx_wdt_start(); +- retval = 0; +- } +- +- return retval; +- +- case WDIOC_KEEPALIVE: +- bcm47xx_wdt_pet(); +- return 0; +- +- case WDIOC_SETTIMEOUT: +- if (get_user(new_value, p)) +- return -EFAULT; +- +- if (bcm47xx_wdt_settimeout(new_value)) +- return -EINVAL; +- +- bcm47xx_wdt_pet(); +- +- case WDIOC_GETTIMEOUT: +- return put_user(wdt_time, p); +- +- default: +- return -ENOTTY; +- } +-} +- + static int bcm47xx_wdt_notify_sys(struct notifier_block *this, +- unsigned long code, void *unused) ++ unsigned long code, void *unused) + { + if (code == SYS_DOWN || code == SYS_HALT) + bcm47xx_wdt_stop(); + return NOTIFY_DONE; + } + +-static const struct file_operations bcm47xx_wdt_fops = { ++static struct watchdog_ops bcm47xx_wdt_ops = { + .owner = THIS_MODULE, +- .llseek = no_llseek, +- .unlocked_ioctl = bcm47xx_wdt_ioctl, +- .open = bcm47xx_wdt_open, +- .release = bcm47xx_wdt_release, +- .write = bcm47xx_wdt_write, ++ .start = bcm47xx_wdt_start, ++ .stop = bcm47xx_wdt_stop, ++ .ping = bcm47xx_wdt_keepalive, ++ .set_timeout = bcm47xx_wdt_set_timeout, + }; + +-static struct miscdevice bcm47xx_wdt_miscdev = { +- .minor = WATCHDOG_MINOR, +- .name = "watchdog", +- .fops = &bcm47xx_wdt_fops, ++static struct watchdog_device bcm47xx_wdt_wdd = { ++ .info = &bcm47xx_wdt_info, ++ .ops = &bcm47xx_wdt_ops, + }; + + static struct notifier_block bcm47xx_wdt_notifier = { +@@ -274,12 +169,13 @@ static int __init bcm47xx_wdt_init(void) + pr_info("wdt_time value must be 0 < wdt_time < %d, using %d\n", + (WDT_MAX_TIME + 1), wdt_time); + } ++ watchdog_set_nowayout(&bcm47xx_wdt_wdd, nowayout); + + ret = register_reboot_notifier(&bcm47xx_wdt_notifier); + if (ret) + return ret; + +- ret = misc_register(&bcm47xx_wdt_miscdev); ++ ret = watchdog_register_device(&bcm47xx_wdt_wdd); + if (ret) { + unregister_reboot_notifier(&bcm47xx_wdt_notifier); + return ret; +@@ -292,10 +188,7 @@ static int __init bcm47xx_wdt_init(void) + + static void __exit bcm47xx_wdt_exit(void) + { +- if (!nowayout) +- bcm47xx_wdt_stop(); +- +- misc_deregister(&bcm47xx_wdt_miscdev); ++ watchdog_unregister_device(&bcm47xx_wdt_wdd); + + unregister_reboot_notifier(&bcm47xx_wdt_notifier); + } +@@ -306,4 +199,3 @@ module_exit(bcm47xx_wdt_exit); + MODULE_AUTHOR("Aleksandar Radovanovic"); + MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx"); + MODULE_LICENSE("GPL"); +-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/target/linux/brcm47xx/patches-3.8/541-watchdog-bcm47xx_wdt.c-use-platform-device.patch b/target/linux/brcm47xx/patches-3.8/541-watchdog-bcm47xx_wdt.c-use-platform-device.patch new file mode 100644 index 0000000000..cb007601be --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/541-watchdog-bcm47xx_wdt.c-use-platform-device.patch @@ -0,0 +1,283 @@ +--- a/drivers/watchdog/bcm47xx_wdt.c ++++ b/drivers/watchdog/bcm47xx_wdt.c +@@ -3,6 +3,7 @@ + * + * Copyright (C) 2008 Aleksandar Radovanovic + * Copyright (C) 2009 Matthieu CASTET ++ * Copyright (C) 2012 Hauke Mehrtens + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License +@@ -12,19 +13,19 @@ + + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + ++#include + #include + #include + #include + #include + #include + #include ++#include + #include + #include + #include + #include + #include +-#include +-#include + + #define DRV_NAME "bcm47xx_wdt" + +@@ -43,48 +44,19 @@ MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +-static struct timer_list wdt_timer; +-static atomic_t ticks; +- +-static inline void bcm47xx_wdt_hw_start(void) ++static inline struct bcm47xx_wdt *bcm47xx_wdt_get(struct watchdog_device *wdd) + { +- /* this is 2,5s on 100Mhz clock and 2s on 133 Mhz */ +- switch (bcm47xx_bus_type) { +-#ifdef CONFIG_BCM47XX_SSB +- case BCM47XX_BUS_TYPE_SSB: +- ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff); +- break; +-#endif +-#ifdef CONFIG_BCM47XX_BCMA +- case BCM47XX_BUS_TYPE_BCMA: +- bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, +- 0xfffffff); +- break; +-#endif +- } ++ return container_of(wdd, struct bcm47xx_wdt, wdd); + } + +-static inline int bcm47xx_wdt_hw_stop(void) ++static void bcm47xx_timer_tick(unsigned long data) + { +- switch (bcm47xx_bus_type) { +-#ifdef CONFIG_BCM47XX_SSB +- case BCM47XX_BUS_TYPE_SSB: +- return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); +-#endif +-#ifdef CONFIG_BCM47XX_BCMA +- case BCM47XX_BUS_TYPE_BCMA: +- bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0); +- return 0; +-#endif +- } +- return -EINVAL; +-} ++ struct bcm47xx_wdt *wdt = (struct bcm47xx_wdt *)data; ++ u32 next_tick = min(wdt->wdd.timeout * 1000, wdt->max_timer_ms); + +-static void bcm47xx_timer_tick(unsigned long unused) +-{ +- if (!atomic_dec_and_test(&ticks)) { +- bcm47xx_wdt_hw_start(); +- mod_timer(&wdt_timer, jiffies + HZ); ++ if (!atomic_dec_and_test(&wdt->soft_ticks)) { ++ wdt->timer_set_ms(wdt, next_tick); ++ mod_timer(&wdt->soft_timer, jiffies + HZ); + } else { + pr_crit("Watchdog will fire soon!!!\n"); + } +@@ -92,23 +64,29 @@ static void bcm47xx_timer_tick(unsigned + + static int bcm47xx_wdt_keepalive(struct watchdog_device *wdd) + { +- atomic_set(&ticks, wdt_time); ++ struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); ++ ++ atomic_set(&wdt->soft_ticks, wdd->timeout); + + return 0; + } + + static int bcm47xx_wdt_start(struct watchdog_device *wdd) + { +- bcm47xx_wdt_pet(); +- bcm47xx_timer_tick(0); ++ struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); ++ ++ bcm47xx_wdt_keepalive(wdd); ++ bcm47xx_timer_tick((unsigned long)wdt); + + return 0; + } + + static int bcm47xx_wdt_stop(struct watchdog_device *wdd) + { +- del_timer_sync(&wdt_timer); +- bcm47xx_wdt_hw_stop(); ++ struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); ++ ++ del_timer_sync(&wdt->soft_timer); ++ wdt->timer_set(wdt, 0); + + return 0; + } +@@ -116,10 +94,13 @@ static int bcm47xx_wdt_stop(struct watch + static int bcm47xx_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int new_time) + { +- if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) ++ if (new_time < 1 || new_time > WDT_MAX_TIME) { ++ pr_warn("timeout value must be 1<=x<=%d, using %d\n", ++ WDT_MAX_TIME, new_time); + return -EINVAL; ++ } + +- wdt_time = new_time; ++ wdd->timeout = new_time; + return 0; + } + +@@ -133,8 +114,11 @@ static const struct watchdog_info bcm47x + static int bcm47xx_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) + { ++ struct bcm47xx_wdt *wdt; ++ ++ wdt = container_of(this, struct bcm47xx_wdt, notifier); + if (code == SYS_DOWN || code == SYS_HALT) +- bcm47xx_wdt_stop(); ++ wdt->wdd.ops->stop(&wdt->wdd); + return NOTIFY_DONE; + } + +@@ -146,56 +130,72 @@ static struct watchdog_ops bcm47xx_wdt_o + .set_timeout = bcm47xx_wdt_set_timeout, + }; + +-static struct watchdog_device bcm47xx_wdt_wdd = { +- .info = &bcm47xx_wdt_info, +- .ops = &bcm47xx_wdt_ops, +-}; +- +-static struct notifier_block bcm47xx_wdt_notifier = { +- .notifier_call = bcm47xx_wdt_notify_sys, +-}; +- +-static int __init bcm47xx_wdt_init(void) ++static int bcm47xx_wdt_probe(struct platform_device *pdev) + { + int ret; ++ struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev); + +- if (bcm47xx_wdt_hw_stop() < 0) +- return -ENODEV; ++ if (!wdt) ++ return -ENXIO; + +- setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L); ++ setup_timer(&wdt->soft_timer, bcm47xx_timer_tick, ++ (long unsigned int)wdt); + +- if (bcm47xx_wdt_settimeout(wdt_time)) { +- bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME); +- pr_info("wdt_time value must be 0 < wdt_time < %d, using %d\n", +- (WDT_MAX_TIME + 1), wdt_time); +- } +- watchdog_set_nowayout(&bcm47xx_wdt_wdd, nowayout); ++ wdt->wdd.ops = &bcm47xx_wdt_ops; ++ wdt->wdd.info = &bcm47xx_wdt_info; ++ wdt->wdd.timeout = WDT_DEFAULT_TIME; ++ ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout); ++ if (ret) ++ goto err_timer; ++ watchdog_set_nowayout(&wdt->wdd, nowayout); ++ ++ wdt->notifier.notifier_call = &bcm47xx_wdt_notify_sys; + +- ret = register_reboot_notifier(&bcm47xx_wdt_notifier); ++ ret = register_reboot_notifier(&wdt->notifier); + if (ret) +- return ret; ++ goto err_timer; + +- ret = watchdog_register_device(&bcm47xx_wdt_wdd); +- if (ret) { +- unregister_reboot_notifier(&bcm47xx_wdt_notifier); +- return ret; +- } ++ ret = watchdog_register_device(&wdt->wdd); ++ if (ret) ++ goto err_notifier; + + pr_info("BCM47xx Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); + return 0; ++ ++err_notifier: ++ unregister_reboot_notifier(&wdt->notifier); ++err_timer: ++ del_timer_sync(&wdt->soft_timer); ++ ++ return ret; + } + +-static void __exit bcm47xx_wdt_exit(void) ++static int bcm47xx_wdt_remove(struct platform_device *pdev) + { +- watchdog_unregister_device(&bcm47xx_wdt_wdd); ++ struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev); ++ ++ if (!wdt) ++ return -ENXIO; ++ ++ watchdog_unregister_device(&wdt->wdd); ++ unregister_reboot_notifier(&wdt->notifier); + +- unregister_reboot_notifier(&bcm47xx_wdt_notifier); ++ return 0; + } + +-module_init(bcm47xx_wdt_init); +-module_exit(bcm47xx_wdt_exit); ++static struct platform_driver bcm47xx_wdt_driver = { ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "bcm47xx-wdt", ++ }, ++ .probe = bcm47xx_wdt_probe, ++ .remove = bcm47xx_wdt_remove, ++}; ++ ++module_platform_driver(bcm47xx_wdt_driver); + + MODULE_AUTHOR("Aleksandar Radovanovic"); ++MODULE_AUTHOR("Hauke Mehrtens "); + MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx"); + MODULE_LICENSE("GPL"); +--- a/include/linux/bcm47xx_wdt.h ++++ b/include/linux/bcm47xx_wdt.h +@@ -1,7 +1,10 @@ + #ifndef LINUX_BCM47XX_WDT_H_ + #define LINUX_BCM47XX_WDT_H_ + ++#include ++#include + #include ++#include + + + struct bcm47xx_wdt { +@@ -10,6 +13,12 @@ struct bcm47xx_wdt { + u32 max_timer_ms; + + void *driver_data; ++ ++ struct watchdog_device wdd; ++ struct notifier_block notifier; ++ ++ struct timer_list soft_timer; ++ atomic_t soft_ticks; + }; + + static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt) diff --git a/target/linux/brcm47xx/patches-3.8/542-watchdog-bcm47xx_wdt.c-rename-ops-methods.patch b/target/linux/brcm47xx/patches-3.8/542-watchdog-bcm47xx_wdt.c-rename-ops-methods.patch new file mode 100644 index 0000000000..bd31ef3bf8 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/542-watchdog-bcm47xx_wdt.c-rename-ops-methods.patch @@ -0,0 +1,99 @@ +--- a/drivers/watchdog/bcm47xx_wdt.c ++++ b/drivers/watchdog/bcm47xx_wdt.c +@@ -30,7 +30,7 @@ + #define DRV_NAME "bcm47xx_wdt" + + #define WDT_DEFAULT_TIME 30 /* seconds */ +-#define WDT_MAX_TIME 255 /* seconds */ ++#define WDT_SOFTTIMER_MAX 255 /* seconds */ + + static int wdt_time = WDT_DEFAULT_TIME; + static bool nowayout = WATCHDOG_NOWAYOUT; +@@ -49,7 +49,7 @@ static inline struct bcm47xx_wdt *bcm47x + return container_of(wdd, struct bcm47xx_wdt, wdd); + } + +-static void bcm47xx_timer_tick(unsigned long data) ++static void bcm47xx_wdt_soft_timer_tick(unsigned long data) + { + struct bcm47xx_wdt *wdt = (struct bcm47xx_wdt *)data; + u32 next_tick = min(wdt->wdd.timeout * 1000, wdt->max_timer_ms); +@@ -62,7 +62,7 @@ static void bcm47xx_timer_tick(unsigned + } + } + +-static int bcm47xx_wdt_keepalive(struct watchdog_device *wdd) ++static int bcm47xx_wdt_soft_keepalive(struct watchdog_device *wdd) + { + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + +@@ -71,17 +71,17 @@ static int bcm47xx_wdt_keepalive(struct + return 0; + } + +-static int bcm47xx_wdt_start(struct watchdog_device *wdd) ++static int bcm47xx_wdt_soft_start(struct watchdog_device *wdd) + { + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + +- bcm47xx_wdt_keepalive(wdd); +- bcm47xx_timer_tick((unsigned long)wdt); ++ bcm47xx_wdt_soft_keepalive(wdd); ++ bcm47xx_wdt_soft_timer_tick((unsigned long)wdt); + + return 0; + } + +-static int bcm47xx_wdt_stop(struct watchdog_device *wdd) ++static int bcm47xx_wdt_soft_stop(struct watchdog_device *wdd) + { + struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); + +@@ -91,12 +91,12 @@ static int bcm47xx_wdt_stop(struct watch + return 0; + } + +-static int bcm47xx_wdt_set_timeout(struct watchdog_device *wdd, +- unsigned int new_time) ++static int bcm47xx_wdt_soft_set_timeout(struct watchdog_device *wdd, ++ unsigned int new_time) + { +- if (new_time < 1 || new_time > WDT_MAX_TIME) { ++ if (new_time < 1 || new_time > WDT_SOFTTIMER_MAX) { + pr_warn("timeout value must be 1<=x<=%d, using %d\n", +- WDT_MAX_TIME, new_time); ++ WDT_SOFTTIMER_MAX, new_time); + return -EINVAL; + } + +@@ -122,12 +122,12 @@ static int bcm47xx_wdt_notify_sys(struct + return NOTIFY_DONE; + } + +-static struct watchdog_ops bcm47xx_wdt_ops = { ++static struct watchdog_ops bcm47xx_wdt_soft_ops = { + .owner = THIS_MODULE, +- .start = bcm47xx_wdt_start, +- .stop = bcm47xx_wdt_stop, +- .ping = bcm47xx_wdt_keepalive, +- .set_timeout = bcm47xx_wdt_set_timeout, ++ .start = bcm47xx_wdt_soft_start, ++ .stop = bcm47xx_wdt_soft_stop, ++ .ping = bcm47xx_wdt_soft_keepalive, ++ .set_timeout = bcm47xx_wdt_soft_set_timeout, + }; + + static int bcm47xx_wdt_probe(struct platform_device *pdev) +@@ -138,10 +138,10 @@ static int bcm47xx_wdt_probe(struct plat + if (!wdt) + return -ENXIO; + +- setup_timer(&wdt->soft_timer, bcm47xx_timer_tick, ++ setup_timer(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick, + (long unsigned int)wdt); + +- wdt->wdd.ops = &bcm47xx_wdt_ops; ++ wdt->wdd.ops = &bcm47xx_wdt_soft_ops; + wdt->wdd.info = &bcm47xx_wdt_info; + wdt->wdd.timeout = WDT_DEFAULT_TIME; + ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout); diff --git a/target/linux/brcm47xx/patches-3.8/543-watchdog-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch b/target/linux/brcm47xx/patches-3.8/543-watchdog-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch new file mode 100644 index 0000000000..f6dc76b988 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/543-watchdog-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch @@ -0,0 +1,26 @@ +--- a/drivers/watchdog/bcm47xx_wdt.c ++++ b/drivers/watchdog/bcm47xx_wdt.c +@@ -32,11 +32,11 @@ + #define WDT_DEFAULT_TIME 30 /* seconds */ + #define WDT_SOFTTIMER_MAX 255 /* seconds */ + +-static int wdt_time = WDT_DEFAULT_TIME; ++static int timeout = WDT_DEFAULT_TIME; + static bool nowayout = WATCHDOG_NOWAYOUT; + +-module_param(wdt_time, int, 0); +-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" ++module_param(timeout, int, 0); ++MODULE_PARM_DESC(timeout, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); + + module_param(nowayout, bool, 0); +@@ -160,7 +160,7 @@ static int bcm47xx_wdt_probe(struct plat + goto err_notifier; + + pr_info("BCM47xx Watchdog Timer enabled (%d seconds%s)\n", +- wdt_time, nowayout ? ", nowayout" : ""); ++ timeout, nowayout ? ", nowayout" : ""); + return 0; + + err_notifier: diff --git a/target/linux/brcm47xx/patches-3.8/544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch b/target/linux/brcm47xx/patches-3.8/544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch new file mode 100644 index 0000000000..5b0b9a8a40 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch @@ -0,0 +1,110 @@ +--- a/drivers/watchdog/bcm47xx_wdt.c ++++ b/drivers/watchdog/bcm47xx_wdt.c +@@ -31,6 +31,7 @@ + + #define WDT_DEFAULT_TIME 30 /* seconds */ + #define WDT_SOFTTIMER_MAX 255 /* seconds */ ++#define WDT_SOFTTIMER_THRESHOLD 60 /* seconds */ + + static int timeout = WDT_DEFAULT_TIME; + static bool nowayout = WATCHDOG_NOWAYOUT; +@@ -49,6 +50,53 @@ static inline struct bcm47xx_wdt *bcm47x + return container_of(wdd, struct bcm47xx_wdt, wdd); + } + ++static int bcm47xx_wdt_hard_keepalive(struct watchdog_device *wdd) ++{ ++ struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); ++ ++ wdt->timer_set_ms(wdt, wdd->timeout * 1000); ++ ++ return 0; ++} ++ ++static int bcm47xx_wdt_hard_start(struct watchdog_device *wdd) ++{ ++ return 0; ++} ++ ++static int bcm47xx_wdt_hard_stop(struct watchdog_device *wdd) ++{ ++ struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); ++ ++ wdt->timer_set(wdt, 0); ++ ++ return 0; ++} ++ ++static int bcm47xx_wdt_hard_set_timeout(struct watchdog_device *wdd, ++ unsigned int new_time) ++{ ++ struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd); ++ u32 max_timer = wdt->max_timer_ms; ++ ++ if (new_time < 1 || new_time > max_timer / 1000) { ++ pr_warn("timeout value must be 1<=x<=%d, using %d\n", ++ max_timer / 1000, new_time); ++ return -EINVAL; ++ } ++ ++ wdd->timeout = new_time; ++ return 0; ++} ++ ++static struct watchdog_ops bcm47xx_wdt_hard_ops = { ++ .owner = THIS_MODULE, ++ .start = bcm47xx_wdt_hard_start, ++ .stop = bcm47xx_wdt_hard_stop, ++ .ping = bcm47xx_wdt_hard_keepalive, ++ .set_timeout = bcm47xx_wdt_hard_set_timeout, ++}; ++ + static void bcm47xx_wdt_soft_timer_tick(unsigned long data) + { + struct bcm47xx_wdt *wdt = (struct bcm47xx_wdt *)data; +@@ -133,15 +181,22 @@ static struct watchdog_ops bcm47xx_wdt_s + static int bcm47xx_wdt_probe(struct platform_device *pdev) + { + int ret; ++ bool soft; + struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev); + + if (!wdt) + return -ENXIO; + +- setup_timer(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick, +- (long unsigned int)wdt); ++ soft = wdt->max_timer_ms < WDT_SOFTTIMER_THRESHOLD * 1000; ++ ++ if (soft) { ++ wdt->wdd.ops = &bcm47xx_wdt_soft_ops; ++ setup_timer(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick, ++ (long unsigned int)wdt); ++ } else { ++ wdt->wdd.ops = &bcm47xx_wdt_hard_ops; ++ } + +- wdt->wdd.ops = &bcm47xx_wdt_soft_ops; + wdt->wdd.info = &bcm47xx_wdt_info; + wdt->wdd.timeout = WDT_DEFAULT_TIME; + ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout); +@@ -159,14 +214,16 @@ static int bcm47xx_wdt_probe(struct plat + if (ret) + goto err_notifier; + +- pr_info("BCM47xx Watchdog Timer enabled (%d seconds%s)\n", +- timeout, nowayout ? ", nowayout" : ""); ++ dev_info(&pdev->dev, "BCM47xx Watchdog Timer enabled (%d seconds%s%s)\n", ++ timeout, nowayout ? ", nowayout" : "", ++ soft ? ", Software Timer" : ""); + return 0; + + err_notifier: + unregister_reboot_notifier(&wdt->notifier); + err_timer: +- del_timer_sync(&wdt->soft_timer); ++ if (soft) ++ del_timer_sync(&wdt->soft_timer); + + return ret; + } diff --git a/target/linux/brcm47xx/patches-3.8/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.8/610-pci_ide_fix.patch new file mode 100644 index 0000000000..f254b203bd --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/610-pci_ide_fix.patch @@ -0,0 +1,14 @@ +--- a/include/linux/ide.h ++++ b/include/linux/ide.h +@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st + hw->io_ports.ctl_addr = ctl_addr; + } + ++#if defined CONFIG_BCM47XX ++# define MAX_HWIFS 2 ++#else + #define MAX_HWIFS 10 ++#endif + + /* + * Now for the data we need to maintain per-drive: ide_drive_t diff --git a/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch new file mode 100644 index 0000000000..9ea39d8b8b --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch @@ -0,0 +1,387 @@ +--- a/drivers/net/ethernet/broadcom/tg3.c ++++ b/drivers/net/ethernet/broadcom/tg3.c +@@ -44,6 +44,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -263,6 +264,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t + TG3_DRV_DATA_FLAG_5705_10_100}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)}, ++ {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F), +@@ -570,7 +572,9 @@ static void _tw32_flush(struct tg3 *tp, + static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val) + { + tp->write32_mbox(tp, off, val); +- if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND)) ++ if (tg3_flag(tp, FLUSH_POSTED_WRITES) || ++ (!tg3_flag(tp, MBOX_WRITE_REORDER) && ++ !tg3_flag(tp, ICH_WORKAROUND))) + tp->read32_mbox(tp, off); + } + +@@ -580,7 +584,8 @@ static void tg3_write32_tx_mbox(struct t + writel(val, mbox); + if (tg3_flag(tp, TXD_MBOX_HWBUG)) + writel(val, mbox); +- if (tg3_flag(tp, MBOX_WRITE_REORDER)) ++ if (tg3_flag(tp, MBOX_WRITE_REORDER) || ++ tg3_flag(tp, FLUSH_POSTED_WRITES)) + readl(mbox); + } + +@@ -1088,7 +1093,8 @@ static void tg3_switch_clocks(struct tg3 + + #define PHY_BUSY_LOOPS 5000 + +-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) ++static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, ++ u32 *val) + { + u32 frame_val; + unsigned int loops; +@@ -1104,7 +1110,7 @@ static int tg3_readphy(struct tg3 *tp, i + + *val = 0x0; + +- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) & ++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & + MI_COM_PHY_ADDR_MASK); + frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & + MI_COM_REG_ADDR_MASK); +@@ -1141,7 +1147,13 @@ static int tg3_readphy(struct tg3 *tp, i + return ret; + } + +-static int tg3_writephy(struct tg3 *tp, int reg, u32 val) ++static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) ++{ ++ return __tg3_readphy(tp, tp->phy_addr, reg, val); ++} ++ ++static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, ++ u32 val) + { + u32 frame_val; + unsigned int loops; +@@ -1159,7 +1171,7 @@ static int tg3_writephy(struct tg3 *tp, + + tg3_ape_lock(tp, tp->phy_ape_lock); + +- frame_val = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) & ++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & + MI_COM_PHY_ADDR_MASK); + frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & + MI_COM_REG_ADDR_MASK); +@@ -1194,6 +1206,11 @@ static int tg3_writephy(struct tg3 *tp, + return ret; + } + ++static int tg3_writephy(struct tg3 *tp, int reg, u32 val) ++{ ++ return __tg3_writephy(tp, tp->phy_addr, reg, val); ++} ++ + static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val) + { + int err; +@@ -1778,6 +1795,11 @@ static int tg3_poll_fw(struct tg3 *tp) + int i; + u32 val; + ++ if (tg3_flag(tp, IS_SSB_CORE)) { ++ /* We don't use firmware. */ ++ return 0; ++ } ++ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + /* Wait up to 20ms for init done. */ + for (i = 0; i < 200; i++) { +@@ -3447,6 +3469,13 @@ static int tg3_halt_cpu(struct tg3 *tp, + tw32_f(offset + CPU_MODE, CPU_MODE_HALT); + udelay(10); + } else { ++ /* ++ * There is only an Rx CPU for the 5750 derivative in the ++ * BCM4785. ++ */ ++ if (tg3_flag(tp, IS_SSB_CORE)) ++ return 0; ++ + for (i = 0; i < 10000; i++) { + tw32(offset + CPU_STATE, 0xffffffff); + tw32(offset + CPU_MODE, CPU_MODE_HALT); +@@ -3914,8 +3943,9 @@ static int tg3_power_down_prepare(struct + tg3_frob_aux_power(tp, true); + + /* Workaround for unstable PLL clock */ +- if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || +- (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) { ++ if ((!tg3_flag(tp, IS_SSB_CORE)) && ++ ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) || ++ (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) { + u32 val = tr32(0x7d00); + + val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1); +@@ -4435,6 +4465,15 @@ relink: + if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) { + tg3_phy_copper_begin(tp); + ++ if (tg3_flag(tp, ROBOSWITCH)) { ++ current_link_up = 1; ++ /* FIXME: when BCM5325 switch is used use 100 MBit/s */ ++ current_speed = SPEED_1000; ++ current_duplex = DUPLEX_FULL; ++ tp->link_config.active_speed = current_speed; ++ tp->link_config.active_duplex = current_duplex; ++ } ++ + tg3_readphy(tp, MII_BMSR, &bmsr); + if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) || + (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)) +@@ -4453,6 +4492,26 @@ relink: + else + tp->mac_mode |= MAC_MODE_PORT_MODE_GMII; + ++ /* In order for the 5750 core in BCM4785 chip to work properly ++ * in RGMII mode, the Led Control Register must be set up. ++ */ ++ if (tg3_flag(tp, RGMII_MODE)) { ++ u32 led_ctrl = tr32(MAC_LED_CTRL); ++ led_ctrl &= ~(LED_CTRL_1000MBPS_ON | LED_CTRL_100MBPS_ON); ++ ++ if (tp->link_config.active_speed == SPEED_10) ++ led_ctrl |= LED_CTRL_LNKLED_OVERRIDE; ++ else if (tp->link_config.active_speed == SPEED_100) ++ led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE | ++ LED_CTRL_100MBPS_ON); ++ else if (tp->link_config.active_speed == SPEED_1000) ++ led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE | ++ LED_CTRL_1000MBPS_ON); ++ ++ tw32(MAC_LED_CTRL, led_ctrl); ++ udelay(40); ++ } ++ + tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX; + if (tp->link_config.active_duplex == DUPLEX_HALF) + tp->mac_mode |= MAC_MODE_HALF_DUPLEX; +@@ -8431,6 +8490,16 @@ static int tg3_chip_reset(struct tg3 *tp + tw32(0x5000, 0x400); + } + ++ if (tg3_flag(tp, IS_SSB_CORE)) { ++ /* ++ * BCM4785: In order to avoid repercussions from using ++ * potentially defective internal ROM, stop the Rx RISC CPU, ++ * which is not required. ++ */ ++ tg3_stop_fw(tp); ++ tg3_halt_cpu(tp, RX_CPU_BASE); ++ } ++ + tw32(GRC_MODE, tp->grc_mode); + + if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { +@@ -10064,6 +10133,11 @@ static void tg3_timer(unsigned long __op + tg3_flag(tp, 57765_CLASS)) + tg3_chk_missed_msi(tp); + ++ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) { ++ /* BCM4785: Flush posted writes from GbE to host memory. */ ++ tr32(HOSTCC_MODE); ++ } ++ + if (!tg3_flag(tp, TAGGED_STATUS)) { + /* All of this garbage is because when using non-tagged + * IRQ status the mailbox/status_block protocol the chip +@@ -12937,7 +13011,8 @@ static int tg3_ioctl(struct net_device * + return -EAGAIN; + + spin_lock_bh(&tp->lock); +- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); ++ err = __tg3_readphy(tp, data->phy_id & 0x1f, ++ data->reg_num & 0x1f, &mii_regval); + spin_unlock_bh(&tp->lock); + + data->val_out = mii_regval; +@@ -12953,7 +13028,8 @@ static int tg3_ioctl(struct net_device * + return -EAGAIN; + + spin_lock_bh(&tp->lock); +- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); ++ err = __tg3_writephy(tp, data->phy_id & 0x1f, ++ data->reg_num & 0x1f, data->val_in); + spin_unlock_bh(&tp->lock); + + return err; +@@ -13806,6 +13882,14 @@ static void tg3_get_5720_nvram_info(stru + /* Chips other than 5700/5701 use the NVRAM for fetching info. */ + static void tg3_nvram_init(struct tg3 *tp) + { ++ if (tg3_flag(tp, IS_SSB_CORE)) { ++ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */ ++ tg3_flag_clear(tp, NVRAM); ++ tg3_flag_clear(tp, NVRAM_BUFFERED); ++ tg3_flag_set(tp, NO_NVRAM); ++ return; ++ } ++ + tw32_f(GRC_EEPROM_ADDR, + (EEPROM_ADDR_FSM_RESET | + (EEPROM_DEFAULT_CLOCK_PERIOD << +@@ -14298,10 +14382,19 @@ static int tg3_phy_probe(struct tg3 *tp) + * subsys device table. + */ + p = tg3_lookup_by_subsys(tp); +- if (!p) ++ if (p) { ++ tp->phy_id = p->phy_id; ++ } else if (!tg3_flag(tp, IS_SSB_CORE)) { ++ /* For now we saw the IDs 0xbc050cd0, ++ * 0xbc050f80 and 0xbc050c30 on devices ++ * connected to an BCM4785 and there are ++ * probably more. Just assume that the phy is ++ * supported when it is connected to a SSB core ++ * for now. ++ */ + return -ENODEV; ++ } + +- tp->phy_id = p->phy_id; + if (!tp->phy_id || + tp->phy_id == TG3_PHY_ID_BCM8002) + tp->phy_flags |= TG3_PHYFLG_PHY_SERDES; +@@ -15346,6 +15439,11 @@ static int tg3_get_invariants(struct tg3 + } + } + ++ if (tg3_flag(tp, FLUSH_POSTED_WRITES)) { ++ tp->write32_tx_mbox = tg3_write_flush_reg32; ++ tp->write32_rx_mbox = tg3_write_flush_reg32; ++ } ++ + /* Get eeprom hw config before calling tg3_set_power_state(). + * In particular, the TG3_FLAG_IS_NIC flag must be + * determined before calling tg3_set_power_state() so that +@@ -15679,12 +15777,19 @@ static int tg3_get_device_address(struct + struct net_device *dev = tp->dev; + u32 hi, lo, mac_offset; + int addr_ok = 0; ++ int err; + + #ifdef CONFIG_SPARC + if (!tg3_get_macaddr_sparc(tp)) + return 0; + #endif + ++ if (tg3_flag(tp, IS_SSB_CORE)) { ++ err = ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]); ++ if (!err && is_valid_ether_addr(&dev->dev_addr[0])) ++ return 0; ++ } ++ + mac_offset = 0x7c; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 || + tg3_flag(tp, 5780_CLASS)) { +@@ -16045,6 +16150,8 @@ static int tg3_test_dma(struct tg3 *tp) + tp->dma_rwctrl |= 0x001b000f; + } + } ++ if (tg3_flag(tp, ONE_DMA_AT_ONCE)) ++ tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) +@@ -16389,6 +16496,18 @@ static int tg3_init_one(struct pci_dev * + else + tp->msg_enable = TG3_DEF_MSG_ENABLE; + ++ if (pdev_is_ssb_gige_core(pdev)) { ++ tg3_flag_set(tp, IS_SSB_CORE); ++ if (ssb_gige_must_flush_posted_writes(pdev)) ++ tg3_flag_set(tp, FLUSH_POSTED_WRITES); ++ if (ssb_gige_one_dma_at_once(pdev)) ++ tg3_flag_set(tp, ONE_DMA_AT_ONCE); ++ if (ssb_gige_have_roboswitch(pdev)) ++ tg3_flag_set(tp, ROBOSWITCH); ++ if (ssb_gige_is_rgmii(pdev)) ++ tg3_flag_set(tp, RGMII_MODE); ++ } ++ + /* The word/byte swap controls here control register access byte + * swapping. DMA data byte swapping is controlled in the GRC_MODE + * setting below. +--- a/drivers/net/ethernet/broadcom/tg3.h ++++ b/drivers/net/ethernet/broadcom/tg3.h +@@ -3030,6 +3030,11 @@ enum TG3_FLAGS { + TG3_FLAG_57765_PLUS, + TG3_FLAG_57765_CLASS, + TG3_FLAG_5717_PLUS, ++ TG3_FLAG_IS_SSB_CORE, ++ TG3_FLAG_FLUSH_POSTED_WRITES, ++ TG3_FLAG_ROBOSWITCH, ++ TG3_FLAG_ONE_DMA_AT_ONCE, ++ TG3_FLAG_RGMII_MODE, + + /* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */ + TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */ +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -2127,6 +2127,7 @@ + #define PCI_DEVICE_ID_TIGON3_5754M 0x1672 + #define PCI_DEVICE_ID_TIGON3_5755M 0x1673 + #define PCI_DEVICE_ID_TIGON3_5756 0x1674 ++#define PCI_DEVICE_ID_TIGON3_5750 0x1676 + #define PCI_DEVICE_ID_TIGON3_5751 0x1677 + #define PCI_DEVICE_ID_TIGON3_5715 0x1678 + #define PCI_DEVICE_ID_TIGON3_5715S 0x1679 +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p + return 0; + } + +-#ifdef CONFIG_BCM47XX +-#include + /* Get the device MAC address */ +-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +-{ +- char buf[20]; +- if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0) +- return; +- bcm47xx_nvram_parse_macaddr(buf, macaddr); +-} +-#else +-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) ++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) + { ++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); ++ if (!dev) ++ return -ENODEV; ++ ++ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6); ++ return 0; + } +-#endif + + extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev); +@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p + { + return 0; + } ++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) ++{ ++ return -ENODEV; ++} + + #endif /* CONFIG_SSB_DRIVER_GIGE */ + #endif /* LINUX_SSB_DRIVER_GIGE_H_ */ diff --git a/target/linux/brcm47xx/patches-3.8/720-eth-backport.patch b/target/linux/brcm47xx/patches-3.8/720-eth-backport.patch new file mode 100644 index 0000000000..98da18a3b9 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/720-eth-backport.patch @@ -0,0 +1,94 @@ +commit fa0879e37b59e8e3f130a30a9e6fa515717c5bdd +Author: Stefan Hajnoczi +Date: Mon Jan 21 01:17:22 2013 +0000 + + net: split eth_mac_addr for better error handling + + When we set mac address, software mac address in system and hardware mac + address all need to be updated. Current eth_mac_addr() doesn't allow + callers to implement error handling nicely. + + This patch split eth_mac_addr() to prepare part and real commit part, + then we can prepare first, and try to change hardware address, then do + the real commit if hardware address is set successfully. + + Signed-off-by: Stefan Hajnoczi + Signed-off-by: Amos Kong + Signed-off-by: David S. Miller + +--- a/include/linux/etherdevice.h ++++ b/include/linux/etherdevice.h +@@ -40,6 +40,8 @@ extern int eth_header_cache(const struct + extern void eth_header_cache_update(struct hh_cache *hh, + const struct net_device *dev, + const unsigned char *haddr); ++extern int eth_prepare_mac_addr_change(struct net_device *dev, void *p); ++extern void eth_commit_mac_addr_change(struct net_device *dev, void *p); + extern int eth_mac_addr(struct net_device *dev, void *p); + extern int eth_change_mtu(struct net_device *dev, int new_mtu); + extern int eth_validate_addr(struct net_device *dev); +--- a/net/ethernet/eth.c ++++ b/net/ethernet/eth.c +@@ -278,16 +278,11 @@ void eth_header_cache_update(struct hh_c + EXPORT_SYMBOL(eth_header_cache_update); + + /** +- * eth_mac_addr - set new Ethernet hardware address ++ * eth_prepare_mac_addr_change - prepare for mac change + * @dev: network device + * @p: socket address +- * +- * Change hardware address of device. +- * +- * This doesn't change hardware matching, so needs to be overridden +- * for most real devices. + */ +-int eth_mac_addr(struct net_device *dev, void *p) ++int eth_prepare_mac_addr_change(struct net_device *dev, void *p) + { + struct sockaddr *addr = p; + +@@ -295,9 +290,43 @@ int eth_mac_addr(struct net_device *dev, + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; ++ return 0; ++} ++EXPORT_SYMBOL(eth_prepare_mac_addr_change); ++ ++/** ++ * eth_commit_mac_addr_change - commit mac change ++ * @dev: network device ++ * @p: socket address ++ */ ++void eth_commit_mac_addr_change(struct net_device *dev, void *p) ++{ ++ struct sockaddr *addr = p; ++ + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + /* if device marked as NET_ADDR_RANDOM, reset it */ + dev->addr_assign_type &= ~NET_ADDR_RANDOM; ++} ++EXPORT_SYMBOL(eth_commit_mac_addr_change); ++ ++/** ++ * eth_mac_addr - set new Ethernet hardware address ++ * @dev: network device ++ * @p: socket address ++ * ++ * Change hardware address of device. ++ * ++ * This doesn't change hardware matching, so needs to be overridden ++ * for most real devices. ++ */ ++int eth_mac_addr(struct net_device *dev, void *p) ++{ ++ int ret; ++ ++ ret = eth_prepare_mac_addr_change(dev, p); ++ if (ret < 0) ++ return ret; ++ eth_commit_mac_addr_change(dev, p); + return 0; + } + EXPORT_SYMBOL(eth_mac_addr); diff --git a/target/linux/brcm47xx/patches-3.8/750-bgmac.patch b/target/linux/brcm47xx/patches-3.8/750-bgmac.patch new file mode 100644 index 0000000000..7ca27509a3 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/750-bgmac.patch @@ -0,0 +1,1978 @@ +From dd4544f05469aaaeee891d7dc54d66430344321e Mon Sep 17 00:00:00 2001 +From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 8 Jan 2013 20:06:23 +0000 +Subject: [PATCH] bgmac: driver for GBit MAC core on BCMA bus +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf8 +Content-Transfer-Encoding: 8bit + +BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA +based SoCs have gigabit ethernet provided by the GBit MAC core. This +patch adds driver for such a cores registering itself as a netdev. It +has been tested on a BCM4706 and BCM4718 chipsets. + +In the kernel tree there is already b44 driver which has some common +things with bgmac, however there are many differences that has led to +the decision or writing a new driver: +1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44) +2) There is 64bit DMA engine which differs from 32bit one +3) There is no CAM (Content Addressable Memory) in GBit MAC +4) We have 4 TX queues on GBit MAC devices (instead of 1) +5) Many registers have different addresses/values +6) RX header flags are also different + +The driver in it's state is functional how, however there is of course +place for improvements: +1) Supporting more net_device_ops +2) SUpporting more ethtool_ops +3) Unaligned addressing in DMA +4) Writing separated PHY driver + +Signed-off-by: Rafał Miłecki +Signed-off-by: David S. Miller +--- + drivers/bcma/driver_chipcommon_pmu.c | 3 +- + drivers/net/ethernet/broadcom/Kconfig | 9 + + drivers/net/ethernet/broadcom/Makefile | 1 + + drivers/net/ethernet/broadcom/bgmac.c | 1422 +++++++++++++++++++++++++++ + drivers/net/ethernet/broadcom/bgmac.h | 456 +++++++++ + include/linux/bcma/bcma_driver_chipcommon.h | 2 + + 6 files changed, 1892 insertions(+), 1 deletions(-) + create mode 100644 drivers/net/ethernet/broadcom/bgmac.c + create mode 100644 drivers/net/ethernet/broadcom/bgmac.h + +--- a/drivers/bcma/driver_chipcommon_pmu.c ++++ b/drivers/bcma/driver_chipcommon_pmu.c +@@ -264,7 +264,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st + } + + /* query bus clock frequency for PMU-enabled chipcommon */ +-static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) ++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc) + { + struct bcma_bus *bus = cc->core->bus; + +@@ -293,6 +293,7 @@ static u32 bcma_pmu_get_bus_clock(struct + } + return BCMA_CC_PMU_HT_CLOCK; + } ++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock); + + /* query cpu clock frequency for PMU-enabled chipcommon */ + u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc) +--- a/drivers/net/ethernet/broadcom/Kconfig ++++ b/drivers/net/ethernet/broadcom/Kconfig +@@ -121,4 +121,13 @@ config BNX2X + To compile this driver as a module, choose M here: the module + will be called bnx2x. This is recommended. + ++config BGMAC ++ tristate "BCMA bus GBit core support" ++ depends on BCMA_HOST_SOC && HAS_DMA ++ ---help--- ++ This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. ++ They can be found on BCM47xx SoCs and provide gigabit ethernet. ++ In case of using this driver on BCM4706 it's also requires to enable ++ BCMA_DRIVER_GMAC_CMN to make it work. ++ + endif # NET_VENDOR_BROADCOM +--- a/drivers/net/ethernet/broadcom/Makefile ++++ b/drivers/net/ethernet/broadcom/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_CNIC) += cnic.o + obj-$(CONFIG_BNX2X) += bnx2x/ + obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o + obj-$(CONFIG_TIGON3) += tg3.o ++obj-$(CONFIG_BGMAC) += bgmac.o +--- /dev/null ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -0,0 +1,1422 @@ ++/* ++ * Driver for (BCM4706)? GBit MAC core on BCMA bus. ++ * ++ * Copyright (C) 2012 Rafał Miłecki ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bgmac.h" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static const struct bcma_device_id bgmac_bcma_tbl[] = { ++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), ++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), ++ BCMA_CORETABLE_END ++}; ++MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); ++ ++static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask, ++ u32 value, int timeout) ++{ ++ u32 val; ++ int i; ++ ++ for (i = 0; i < timeout / 10; i++) { ++ val = bcma_read32(core, reg); ++ if ((val & mask) == value) ++ return true; ++ udelay(10); ++ } ++ pr_err("Timeout waiting for reg 0x%X\n", reg); ++ return false; ++} ++ ++/************************************************** ++ * DMA ++ **************************************************/ ++ ++static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) ++{ ++ u32 val; ++ int i; ++ ++ if (!ring->mmio_base) ++ return; ++ ++ /* Suspend DMA TX ring first. ++ * bgmac_wait_value doesn't support waiting for any of few values, so ++ * implement whole loop here. ++ */ ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ++ BGMAC_DMA_TX_SUSPEND); ++ for (i = 0; i < 10000 / 10; i++) { ++ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); ++ val &= BGMAC_DMA_TX_STAT; ++ if (val == BGMAC_DMA_TX_STAT_DISABLED || ++ val == BGMAC_DMA_TX_STAT_IDLEWAIT || ++ val == BGMAC_DMA_TX_STAT_STOPPED) { ++ i = 0; ++ break; ++ } ++ udelay(10); ++ } ++ if (i) ++ bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n", ++ ring->mmio_base, val); ++ ++ /* Remove SUSPEND bit */ ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0); ++ if (!bgmac_wait_value(bgmac->core, ++ ring->mmio_base + BGMAC_DMA_TX_STATUS, ++ BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED, ++ 10000)) { ++ bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", ++ ring->mmio_base); ++ udelay(300); ++ val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); ++ if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED) ++ bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", ++ ring->mmio_base); ++ } ++} ++ ++static void bgmac_dma_tx_enable(struct bgmac *bgmac, ++ struct bgmac_dma_ring *ring) ++{ ++ u32 ctl; ++ ++ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL); ++ ctl |= BGMAC_DMA_TX_ENABLE; ++ ctl |= BGMAC_DMA_TX_PARITY_DISABLE; ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl); ++} ++ ++static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac, ++ struct bgmac_dma_ring *ring, ++ struct sk_buff *skb) ++{ ++ struct device *dma_dev = bgmac->core->dma_dev; ++ struct net_device *net_dev = bgmac->net_dev; ++ struct bgmac_dma_desc *dma_desc; ++ struct bgmac_slot_info *slot; ++ u32 ctl0, ctl1; ++ int free_slots; ++ ++ if (skb->len > BGMAC_DESC_CTL1_LEN) { ++ bgmac_err(bgmac, "Too long skb (%d)\n", skb->len); ++ goto err_stop_drop; ++ } ++ ++ if (ring->start <= ring->end) ++ free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS; ++ else ++ free_slots = ring->start - ring->end; ++ if (free_slots == 1) { ++ bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n"); ++ netif_stop_queue(net_dev); ++ return NETDEV_TX_BUSY; ++ } ++ ++ slot = &ring->slots[ring->end]; ++ slot->skb = skb; ++ slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(dma_dev, slot->dma_addr)) { ++ bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", ++ ring->mmio_base); ++ goto err_stop_drop; ++ } ++ ++ ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF; ++ if (ring->end == ring->num_slots - 1) ++ ctl0 |= BGMAC_DESC_CTL0_EOT; ++ ctl1 = skb->len & BGMAC_DESC_CTL1_LEN; ++ ++ dma_desc = ring->cpu_base; ++ dma_desc += ring->end; ++ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr)); ++ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr)); ++ dma_desc->ctl0 = cpu_to_le32(ctl0); ++ dma_desc->ctl1 = cpu_to_le32(ctl1); ++ ++ wmb(); ++ ++ /* Increase ring->end to point empty slot. We tell hardware the first ++ * slot it should *not* read. ++ */ ++ if (++ring->end >= BGMAC_TX_RING_SLOTS) ++ ring->end = 0; ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX, ++ ring->end * sizeof(struct bgmac_dma_desc)); ++ ++ /* Always keep one slot free to allow detecting bugged calls. */ ++ if (--free_slots == 1) ++ netif_stop_queue(net_dev); ++ ++ return NETDEV_TX_OK; ++ ++err_stop_drop: ++ netif_stop_queue(net_dev); ++ dev_kfree_skb(skb); ++ return NETDEV_TX_OK; ++} ++ ++/* Free transmitted packets */ ++static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) ++{ ++ struct device *dma_dev = bgmac->core->dma_dev; ++ int empty_slot; ++ bool freed = false; ++ ++ /* The last slot that hardware didn't consume yet */ ++ empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); ++ empty_slot &= BGMAC_DMA_TX_STATDPTR; ++ empty_slot /= sizeof(struct bgmac_dma_desc); ++ ++ while (ring->start != empty_slot) { ++ struct bgmac_slot_info *slot = &ring->slots[ring->start]; ++ ++ if (slot->skb) { ++ /* Unmap no longer used buffer */ ++ dma_unmap_single(dma_dev, slot->dma_addr, ++ slot->skb->len, DMA_TO_DEVICE); ++ slot->dma_addr = 0; ++ ++ /* Free memory! :) */ ++ dev_kfree_skb(slot->skb); ++ slot->skb = NULL; ++ } else { ++ bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n", ++ ring->start, ring->end); ++ } ++ ++ if (++ring->start >= BGMAC_TX_RING_SLOTS) ++ ring->start = 0; ++ freed = true; ++ } ++ ++ if (freed && netif_queue_stopped(bgmac->net_dev)) ++ netif_wake_queue(bgmac->net_dev); ++} ++ ++static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) ++{ ++ if (!ring->mmio_base) ++ return; ++ ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0); ++ if (!bgmac_wait_value(bgmac->core, ++ ring->mmio_base + BGMAC_DMA_RX_STATUS, ++ BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED, ++ 10000)) ++ bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", ++ ring->mmio_base); ++} ++ ++static void bgmac_dma_rx_enable(struct bgmac *bgmac, ++ struct bgmac_dma_ring *ring) ++{ ++ u32 ctl; ++ ++ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL); ++ ctl &= BGMAC_DMA_RX_ADDREXT_MASK; ++ ctl |= BGMAC_DMA_RX_ENABLE; ++ ctl |= BGMAC_DMA_RX_PARITY_DISABLE; ++ ctl |= BGMAC_DMA_RX_OVERFLOW_CONT; ++ ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT; ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl); ++} ++ ++static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, ++ struct bgmac_slot_info *slot) ++{ ++ struct device *dma_dev = bgmac->core->dma_dev; ++ struct bgmac_rx_header *rx; ++ ++ /* Alloc skb */ ++ slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE); ++ if (!slot->skb) { ++ bgmac_err(bgmac, "Allocation of skb failed!\n"); ++ return -ENOMEM; ++ } ++ ++ /* Poison - if everything goes fine, hardware will overwrite it */ ++ rx = (struct bgmac_rx_header *)slot->skb->data; ++ rx->len = cpu_to_le16(0xdead); ++ rx->flags = cpu_to_le16(0xbeef); ++ ++ /* Map skb for the DMA */ ++ slot->dma_addr = dma_map_single(dma_dev, slot->skb->data, ++ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); ++ if (dma_mapping_error(dma_dev, slot->dma_addr)) { ++ bgmac_err(bgmac, "DMA mapping error\n"); ++ return -ENOMEM; ++ } ++ if (slot->dma_addr & 0xC0000000) ++ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); ++ ++ return 0; ++} ++ ++static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring, ++ int weight) ++{ ++ u32 end_slot; ++ int handled = 0; ++ ++ end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS); ++ end_slot &= BGMAC_DMA_RX_STATDPTR; ++ end_slot /= sizeof(struct bgmac_dma_desc); ++ ++ ring->end = end_slot; ++ ++ while (ring->start != ring->end) { ++ struct device *dma_dev = bgmac->core->dma_dev; ++ struct bgmac_slot_info *slot = &ring->slots[ring->start]; ++ struct sk_buff *skb = slot->skb; ++ struct sk_buff *new_skb; ++ struct bgmac_rx_header *rx; ++ u16 len, flags; ++ ++ /* Unmap buffer to make it accessible to the CPU */ ++ dma_sync_single_for_cpu(dma_dev, slot->dma_addr, ++ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); ++ ++ /* Get info from the header */ ++ rx = (struct bgmac_rx_header *)skb->data; ++ len = le16_to_cpu(rx->len); ++ flags = le16_to_cpu(rx->flags); ++ ++ /* Check for poison and drop or pass the packet */ ++ if (len == 0xdead && flags == 0xbeef) { ++ bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", ++ ring->start); ++ } else { ++ new_skb = netdev_alloc_skb(bgmac->net_dev, len); ++ if (new_skb) { ++ skb_put(new_skb, len); ++ skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET, ++ new_skb->data, ++ len); ++ new_skb->protocol = ++ eth_type_trans(new_skb, bgmac->net_dev); ++ netif_receive_skb(new_skb); ++ handled++; ++ } else { ++ bgmac->net_dev->stats.rx_dropped++; ++ bgmac_err(bgmac, "Allocation of skb for copying packet failed!\n"); ++ } ++ ++ /* Poison the old skb */ ++ rx->len = cpu_to_le16(0xdead); ++ rx->flags = cpu_to_le16(0xbeef); ++ } ++ ++ /* Make it back accessible to the hardware */ ++ dma_sync_single_for_device(dma_dev, slot->dma_addr, ++ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); ++ ++ if (++ring->start >= BGMAC_RX_RING_SLOTS) ++ ring->start = 0; ++ ++ if (handled >= weight) /* Should never be greater */ ++ break; ++ } ++ ++ return handled; ++} ++ ++/* Does ring support unaligned addressing? */ ++static bool bgmac_dma_unaligned(struct bgmac *bgmac, ++ struct bgmac_dma_ring *ring, ++ enum bgmac_dma_ring_type ring_type) ++{ ++ switch (ring_type) { ++ case BGMAC_DMA_RING_TX: ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, ++ 0xff0); ++ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO)) ++ return true; ++ break; ++ case BGMAC_DMA_RING_RX: ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, ++ 0xff0); ++ if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO)) ++ return true; ++ break; ++ } ++ return false; ++} ++ ++static void bgmac_dma_ring_free(struct bgmac *bgmac, ++ struct bgmac_dma_ring *ring) ++{ ++ struct device *dma_dev = bgmac->core->dma_dev; ++ struct bgmac_slot_info *slot; ++ int size; ++ int i; ++ ++ for (i = 0; i < ring->num_slots; i++) { ++ slot = &ring->slots[i]; ++ if (slot->skb) { ++ if (slot->dma_addr) ++ dma_unmap_single(dma_dev, slot->dma_addr, ++ slot->skb->len, DMA_TO_DEVICE); ++ dev_kfree_skb(slot->skb); ++ } ++ } ++ ++ if (ring->cpu_base) { ++ /* Free ring of descriptors */ ++ size = ring->num_slots * sizeof(struct bgmac_dma_desc); ++ dma_free_coherent(dma_dev, size, ring->cpu_base, ++ ring->dma_base); ++ } ++} ++ ++static void bgmac_dma_free(struct bgmac *bgmac) ++{ ++ int i; ++ ++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) ++ bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]); ++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) ++ bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]); ++} ++ ++static int bgmac_dma_alloc(struct bgmac *bgmac) ++{ ++ struct device *dma_dev = bgmac->core->dma_dev; ++ struct bgmac_dma_ring *ring; ++ static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, ++ BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, }; ++ int size; /* ring size: different for Tx and Rx */ ++ int err; ++ int i; ++ ++ BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base)); ++ BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base)); ++ ++ if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) { ++ bgmac_err(bgmac, "Core does not report 64-bit DMA\n"); ++ return -ENOTSUPP; ++ } ++ ++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { ++ ring = &bgmac->tx_ring[i]; ++ ring->num_slots = BGMAC_TX_RING_SLOTS; ++ ring->mmio_base = ring_base[i]; ++ if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX)) ++ bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", ++ ring->mmio_base); ++ ++ /* Alloc ring of descriptors */ ++ size = ring->num_slots * sizeof(struct bgmac_dma_desc); ++ ring->cpu_base = dma_zalloc_coherent(dma_dev, size, ++ &ring->dma_base, ++ GFP_KERNEL); ++ if (!ring->cpu_base) { ++ bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n", ++ ring->mmio_base); ++ goto err_dma_free; ++ } ++ if (ring->dma_base & 0xC0000000) ++ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); ++ ++ /* No need to alloc TX slots yet */ ++ } ++ ++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { ++ ring = &bgmac->rx_ring[i]; ++ ring->num_slots = BGMAC_RX_RING_SLOTS; ++ ring->mmio_base = ring_base[i]; ++ if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX)) ++ bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", ++ ring->mmio_base); ++ ++ /* Alloc ring of descriptors */ ++ size = ring->num_slots * sizeof(struct bgmac_dma_desc); ++ ring->cpu_base = dma_zalloc_coherent(dma_dev, size, ++ &ring->dma_base, ++ GFP_KERNEL); ++ if (!ring->cpu_base) { ++ bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n", ++ ring->mmio_base); ++ err = -ENOMEM; ++ goto err_dma_free; ++ } ++ if (ring->dma_base & 0xC0000000) ++ bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); ++ ++ /* Alloc RX slots */ ++ for (i = 0; i < ring->num_slots; i++) { ++ err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]); ++ if (err) { ++ bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n"); ++ goto err_dma_free; ++ } ++ } ++ } ++ ++ return 0; ++ ++err_dma_free: ++ bgmac_dma_free(bgmac); ++ return -ENOMEM; ++} ++ ++static void bgmac_dma_init(struct bgmac *bgmac) ++{ ++ struct bgmac_dma_ring *ring; ++ struct bgmac_dma_desc *dma_desc; ++ u32 ctl0, ctl1; ++ int i; ++ ++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { ++ ring = &bgmac->tx_ring[i]; ++ ++ /* We don't implement unaligned addressing, so enable first */ ++ bgmac_dma_tx_enable(bgmac, ring); ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, ++ lower_32_bits(ring->dma_base)); ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI, ++ upper_32_bits(ring->dma_base)); ++ ++ ring->start = 0; ++ ring->end = 0; /* Points the slot that should *not* be read */ ++ } ++ ++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { ++ ring = &bgmac->rx_ring[i]; ++ ++ /* We don't implement unaligned addressing, so enable first */ ++ bgmac_dma_rx_enable(bgmac, ring); ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, ++ lower_32_bits(ring->dma_base)); ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI, ++ upper_32_bits(ring->dma_base)); ++ ++ for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots; ++ i++, dma_desc++) { ++ ctl0 = ctl1 = 0; ++ ++ if (i == ring->num_slots - 1) ++ ctl0 |= BGMAC_DESC_CTL0_EOT; ++ ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN; ++ /* Is there any BGMAC device that requires extension? */ ++ /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) & ++ * B43_DMA64_DCTL1_ADDREXT_MASK; ++ */ ++ ++ dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr)); ++ dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr)); ++ dma_desc->ctl0 = cpu_to_le32(ctl0); ++ dma_desc->ctl1 = cpu_to_le32(ctl1); ++ } ++ ++ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, ++ ring->num_slots * sizeof(struct bgmac_dma_desc)); ++ ++ ring->start = 0; ++ ring->end = 0; ++ } ++} ++ ++/************************************************** ++ * PHY ops ++ **************************************************/ ++ ++u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) ++{ ++ struct bcma_device *core; ++ u16 phy_access_addr; ++ u16 phy_ctl_addr; ++ u32 tmp; ++ ++ BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK); ++ BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK); ++ BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT); ++ BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK); ++ BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT); ++ BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE); ++ BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START); ++ BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK); ++ BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK); ++ BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); ++ BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); ++ ++ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { ++ core = bgmac->core->bus->drv_gmac_cmn.core; ++ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; ++ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; ++ } else { ++ core = bgmac->core; ++ phy_access_addr = BGMAC_PHY_ACCESS; ++ phy_ctl_addr = BGMAC_PHY_CNTL; ++ } ++ ++ tmp = bcma_read32(core, phy_ctl_addr); ++ tmp &= ~BGMAC_PC_EPA_MASK; ++ tmp |= phyaddr; ++ bcma_write32(core, phy_ctl_addr, tmp); ++ ++ tmp = BGMAC_PA_START; ++ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; ++ tmp |= reg << BGMAC_PA_REG_SHIFT; ++ bcma_write32(core, phy_access_addr, tmp); ++ ++ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { ++ bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n", ++ phyaddr, reg); ++ return 0xffff; ++ } ++ ++ return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK; ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ ++void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) ++{ ++ struct bcma_device *core; ++ u16 phy_access_addr; ++ u16 phy_ctl_addr; ++ u32 tmp; ++ ++ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { ++ core = bgmac->core->bus->drv_gmac_cmn.core; ++ phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; ++ phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; ++ } else { ++ core = bgmac->core; ++ phy_access_addr = BGMAC_PHY_ACCESS; ++ phy_ctl_addr = BGMAC_PHY_CNTL; ++ } ++ ++ tmp = bcma_read32(core, phy_ctl_addr); ++ tmp &= ~BGMAC_PC_EPA_MASK; ++ tmp |= phyaddr; ++ bcma_write32(core, phy_ctl_addr, tmp); ++ ++ bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO); ++ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) ++ bgmac_warn(bgmac, "Error setting MDIO int\n"); ++ ++ tmp = BGMAC_PA_START; ++ tmp |= BGMAC_PA_WRITE; ++ tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; ++ tmp |= reg << BGMAC_PA_REG_SHIFT; ++ tmp |= value; ++ bcma_write32(core, phy_access_addr, tmp); ++ ++ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) ++ bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", ++ phyaddr, reg); ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */ ++static void bgmac_phy_force(struct bgmac *bgmac) ++{ ++ u16 ctl; ++ u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB | ++ BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX); ++ ++ if (bgmac->phyaddr == BGMAC_PHY_NOREGS) ++ return; ++ ++ if (bgmac->autoneg) ++ return; ++ ++ ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL); ++ ctl &= mask; ++ if (bgmac->full_duplex) ++ ctl |= BGMAC_PHY_CTL_DUPLEX; ++ if (bgmac->speed == BGMAC_SPEED_100) ++ ctl |= BGMAC_PHY_CTL_SPEED_100; ++ else if (bgmac->speed == BGMAC_SPEED_1000) ++ ctl |= BGMAC_PHY_CTL_SPEED_1000; ++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl); ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */ ++static void bgmac_phy_advertise(struct bgmac *bgmac) ++{ ++ u16 adv; ++ ++ if (bgmac->phyaddr == BGMAC_PHY_NOREGS) ++ return; ++ ++ if (!bgmac->autoneg) ++ return; ++ ++ /* Adv selected 10/100 speeds */ ++ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV); ++ adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL | ++ BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL); ++ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) ++ adv |= BGMAC_PHY_ADV_10HALF; ++ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) ++ adv |= BGMAC_PHY_ADV_100HALF; ++ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) ++ adv |= BGMAC_PHY_ADV_10FULL; ++ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) ++ adv |= BGMAC_PHY_ADV_100FULL; ++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv); ++ ++ /* Adv selected 1000 speeds */ ++ adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2); ++ adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL); ++ if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) ++ adv |= BGMAC_PHY_ADV2_1000HALF; ++ if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) ++ adv |= BGMAC_PHY_ADV2_1000FULL; ++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv); ++ ++ /* Restart */ ++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ++ bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) | ++ BGMAC_PHY_CTL_RESTART); ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ ++static void bgmac_phy_init(struct bgmac *bgmac) ++{ ++ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; ++ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; ++ u8 i; ++ ++ if (ci->id == BCMA_CHIP_ID_BCM5356) { ++ for (i = 0; i < 5; i++) { ++ bgmac_phy_write(bgmac, i, 0x1f, 0x008b); ++ bgmac_phy_write(bgmac, i, 0x15, 0x0100); ++ bgmac_phy_write(bgmac, i, 0x1f, 0x000f); ++ bgmac_phy_write(bgmac, i, 0x12, 0x2aaa); ++ bgmac_phy_write(bgmac, i, 0x1f, 0x000b); ++ } ++ } ++ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || ++ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || ++ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { ++ bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); ++ bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); ++ for (i = 0; i < 5; i++) { ++ bgmac_phy_write(bgmac, i, 0x1f, 0x000f); ++ bgmac_phy_write(bgmac, i, 0x16, 0x5284); ++ bgmac_phy_write(bgmac, i, 0x1f, 0x000b); ++ bgmac_phy_write(bgmac, i, 0x17, 0x0010); ++ bgmac_phy_write(bgmac, i, 0x1f, 0x000f); ++ bgmac_phy_write(bgmac, i, 0x16, 0x5296); ++ bgmac_phy_write(bgmac, i, 0x17, 0x1073); ++ bgmac_phy_write(bgmac, i, 0x17, 0x9073); ++ bgmac_phy_write(bgmac, i, 0x16, 0x52b6); ++ bgmac_phy_write(bgmac, i, 0x17, 0x9273); ++ bgmac_phy_write(bgmac, i, 0x1f, 0x000b); ++ } ++ } ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ ++static void bgmac_phy_reset(struct bgmac *bgmac) ++{ ++ if (bgmac->phyaddr == BGMAC_PHY_NOREGS) ++ return; ++ ++ bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ++ BGMAC_PHY_CTL_RESET); ++ udelay(100); ++ if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) & ++ BGMAC_PHY_CTL_RESET) ++ bgmac_err(bgmac, "PHY reset failed\n"); ++ bgmac_phy_init(bgmac); ++} ++ ++/************************************************** ++ * Chip ops ++ **************************************************/ ++ ++/* TODO: can we just drop @force? Can we don't reset MAC at all if there is ++ * nothing to change? Try if after stabilizng driver. ++ */ ++static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set, ++ bool force) ++{ ++ u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); ++ u32 new_val = (cmdcfg & mask) | set; ++ ++ bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR); ++ udelay(2); ++ ++ if (new_val != cmdcfg || force) ++ bgmac_write(bgmac, BGMAC_CMDCFG, new_val); ++ ++ bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR); ++ udelay(2); ++} ++ ++#if 0 /* We don't use that regs yet */ ++static void bgmac_chip_stats_update(struct bgmac *bgmac) ++{ ++ int i; ++ ++ if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) { ++ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) ++ bgmac->mib_tx_regs[i] = ++ bgmac_read(bgmac, ++ BGMAC_TX_GOOD_OCTETS + (i * 4)); ++ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) ++ bgmac->mib_rx_regs[i] = ++ bgmac_read(bgmac, ++ BGMAC_RX_GOOD_OCTETS + (i * 4)); ++ } ++ ++ /* TODO: what else? how to handle BCM4706? Specs are needed */ ++} ++#endif ++ ++static void bgmac_clear_mib(struct bgmac *bgmac) ++{ ++ int i; ++ ++ if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) ++ return; ++ ++ bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR); ++ for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) ++ bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4)); ++ for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) ++ bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4)); ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */ ++static void bgmac_speed(struct bgmac *bgmac, int speed) ++{ ++ u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD); ++ u32 set = 0; ++ ++ if (speed & BGMAC_SPEED_10) ++ set |= BGMAC_CMDCFG_ES_10; ++ if (speed & BGMAC_SPEED_100) ++ set |= BGMAC_CMDCFG_ES_100; ++ if (speed & BGMAC_SPEED_1000) ++ set |= BGMAC_CMDCFG_ES_1000; ++ if (!bgmac->full_duplex) ++ set |= BGMAC_CMDCFG_HD; ++ bgmac_cmdcfg_maskset(bgmac, mask, set, true); ++} ++ ++static void bgmac_miiconfig(struct bgmac *bgmac) ++{ ++ u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> ++ BGMAC_DS_MM_SHIFT; ++ if (imode == 0 || imode == 1) { ++ if (bgmac->autoneg) ++ bgmac_speed(bgmac, BGMAC_SPEED_100); ++ else ++ bgmac_speed(bgmac, bgmac->speed); ++ } ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */ ++static void bgmac_chip_reset(struct bgmac *bgmac) ++{ ++ struct bcma_device *core = bgmac->core; ++ struct bcma_bus *bus = core->bus; ++ struct bcma_chipinfo *ci = &bus->chipinfo; ++ u32 flags = 0; ++ u32 iost; ++ int i; ++ ++ if (bcma_core_is_enabled(core)) { ++ if (!bgmac->stats_grabbed) { ++ /* bgmac_chip_stats_update(bgmac); */ ++ bgmac->stats_grabbed = true; ++ } ++ ++ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) ++ bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]); ++ ++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); ++ udelay(1); ++ ++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) ++ bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]); ++ ++ /* TODO: Clear software multicast filter list */ ++ } ++ ++ iost = bcma_aread32(core, BCMA_IOST); ++ if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) || ++ (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) || ++ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) ++ iost &= ~BGMAC_BCMA_IOST_ATTACHED; ++ ++ if (iost & BGMAC_BCMA_IOST_ATTACHED) { ++ flags = BGMAC_BCMA_IOCTL_SW_CLKEN; ++ if (!bgmac->has_robosw) ++ flags |= BGMAC_BCMA_IOCTL_SW_RESET; ++ } ++ ++ bcma_core_enable(core, flags); ++ ++ if (core->id.rev > 2) { ++ bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8); ++ bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24, ++ 1000); ++ } ++ ++ if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 || ++ ci->id == BCMA_CHIP_ID_BCM53572) { ++ struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; ++ u8 et_swtype = 0; ++ u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY | ++ BGMAC_CHIPCTL_1_IF_TYPE_RMII; ++ char buf[2]; ++ ++ if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) { ++ if (kstrtou8(buf, 0, &et_swtype)) ++ bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", ++ buf); ++ et_swtype &= 0x0f; ++ et_swtype <<= 4; ++ sw_type = et_swtype; ++ } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) { ++ sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; ++ } else if (0) { ++ /* TODO */ ++ } ++ bcma_chipco_chipctl_maskset(cc, 1, ++ ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | ++ BGMAC_CHIPCTL_1_SW_TYPE_MASK), ++ sw_type); ++ } ++ ++ if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw) ++ bcma_awrite32(core, BCMA_IOCTL, ++ bcma_aread32(core, BCMA_IOCTL) & ++ ~BGMAC_BCMA_IOCTL_SW_RESET); ++ ++ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset ++ * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine ++ * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to ++ * be keps until taking MAC out of the reset. ++ */ ++ bgmac_cmdcfg_maskset(bgmac, ++ ~(BGMAC_CMDCFG_TE | ++ BGMAC_CMDCFG_RE | ++ BGMAC_CMDCFG_RPI | ++ BGMAC_CMDCFG_TAI | ++ BGMAC_CMDCFG_HD | ++ BGMAC_CMDCFG_ML | ++ BGMAC_CMDCFG_CFE | ++ BGMAC_CMDCFG_RL | ++ BGMAC_CMDCFG_RED | ++ BGMAC_CMDCFG_PE | ++ BGMAC_CMDCFG_TPI | ++ BGMAC_CMDCFG_PAD_EN | ++ BGMAC_CMDCFG_PF), ++ BGMAC_CMDCFG_PROM | ++ BGMAC_CMDCFG_NLC | ++ BGMAC_CMDCFG_CFE | ++ BGMAC_CMDCFG_SR, ++ false); ++ ++ bgmac_clear_mib(bgmac); ++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT) ++ bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0, ++ BCMA_GMAC_CMN_PC_MTE); ++ else ++ bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE); ++ bgmac_miiconfig(bgmac); ++ bgmac_phy_init(bgmac); ++ ++ bgmac->int_status = 0; ++} ++ ++static void bgmac_chip_intrs_on(struct bgmac *bgmac) ++{ ++ bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask); ++} ++ ++static void bgmac_chip_intrs_off(struct bgmac *bgmac) ++{ ++ bgmac_write(bgmac, BGMAC_INT_MASK, 0); ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ ++static void bgmac_enable(struct bgmac *bgmac) ++{ ++ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; ++ u32 cmdcfg; ++ u32 mode; ++ u32 rxq_ctl; ++ u32 fl_ctl; ++ u16 bp_clk; ++ u8 mdp; ++ ++ cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); ++ bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE), ++ BGMAC_CMDCFG_SR, true); ++ udelay(2); ++ cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE; ++ bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg); ++ ++ mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> ++ BGMAC_DS_MM_SHIFT; ++ if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0) ++ bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); ++ if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2) ++ bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0, ++ BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); ++ ++ switch (ci->id) { ++ case BCMA_CHIP_ID_BCM5357: ++ case BCMA_CHIP_ID_BCM4749: ++ case BCMA_CHIP_ID_BCM53572: ++ case BCMA_CHIP_ID_BCM4716: ++ case BCMA_CHIP_ID_BCM47162: ++ fl_ctl = 0x03cb04cb; ++ if (ci->id == BCMA_CHIP_ID_BCM5357 || ++ ci->id == BCMA_CHIP_ID_BCM4749 || ++ ci->id == BCMA_CHIP_ID_BCM53572) ++ fl_ctl = 0x2300e1; ++ bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl); ++ bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff); ++ break; ++ } ++ ++ rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); ++ rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; ++ bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000; ++ mdp = (bp_clk * 128 / 1000) - 3; ++ rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT); ++ bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl); ++} ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */ ++static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) ++{ ++ struct bgmac_dma_ring *ring; ++ u8 *mac = bgmac->net_dev->dev_addr; ++ u32 tmp; ++ int i; ++ ++ /* 1 interrupt per received frame */ ++ bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT); ++ ++ /* Enable 802.3x tx flow control (honor received PAUSE frames) */ ++ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); ++ ++ if (bgmac->net_dev->flags & IFF_PROMISC) ++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); ++ else ++ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); ++ ++ /* Set MAC addr */ ++ tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; ++ bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); ++ tmp = (mac[4] << 8) | mac[5]; ++ bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); ++ ++ if (bgmac->loopback) ++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true); ++ else ++ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true); ++ ++ bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); ++ ++ if (!bgmac->autoneg) { ++ bgmac_speed(bgmac, bgmac->speed); ++ bgmac_phy_force(bgmac); ++ } else if (bgmac->speed) { /* if there is anything to adv */ ++ bgmac_phy_advertise(bgmac); ++ } ++ ++ if (full_init) { ++ bgmac_dma_init(bgmac); ++ if (1) /* FIXME: is there any case we don't want IRQs? */ ++ bgmac_chip_intrs_on(bgmac); ++ } else { ++ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { ++ ring = &bgmac->rx_ring[i]; ++ bgmac_dma_rx_enable(bgmac, ring); ++ } ++ } ++ ++ bgmac_enable(bgmac); ++} ++ ++static irqreturn_t bgmac_interrupt(int irq, void *dev_id) ++{ ++ struct bgmac *bgmac = netdev_priv(dev_id); ++ ++ u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS); ++ int_status &= bgmac->int_mask; ++ ++ if (!int_status) ++ return IRQ_NONE; ++ ++ /* Ack */ ++ bgmac_write(bgmac, BGMAC_INT_STATUS, int_status); ++ ++ /* Disable new interrupts until handling existing ones */ ++ bgmac_chip_intrs_off(bgmac); ++ ++ bgmac->int_status = int_status; ++ ++ napi_schedule(&bgmac->napi); ++ ++ return IRQ_HANDLED; ++} ++ ++static int bgmac_poll(struct napi_struct *napi, int weight) ++{ ++ struct bgmac *bgmac = container_of(napi, struct bgmac, napi); ++ struct bgmac_dma_ring *ring; ++ int handled = 0; ++ ++ if (bgmac->int_status & BGMAC_IS_TX0) { ++ ring = &bgmac->tx_ring[0]; ++ bgmac_dma_tx_free(bgmac, ring); ++ bgmac->int_status &= ~BGMAC_IS_TX0; ++ } ++ ++ if (bgmac->int_status & BGMAC_IS_RX) { ++ ring = &bgmac->rx_ring[0]; ++ handled += bgmac_dma_rx_read(bgmac, ring, weight); ++ bgmac->int_status &= ~BGMAC_IS_RX; ++ } ++ ++ if (bgmac->int_status) { ++ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status); ++ bgmac->int_status = 0; ++ } ++ ++ if (handled < weight) ++ napi_complete(napi); ++ ++ bgmac_chip_intrs_on(bgmac); ++ ++ return handled; ++} ++ ++/************************************************** ++ * net_device_ops ++ **************************************************/ ++ ++static int bgmac_open(struct net_device *net_dev) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ int err = 0; ++ ++ bgmac_chip_reset(bgmac); ++ /* Specs say about reclaiming rings here, but we do that in DMA init */ ++ bgmac_chip_init(bgmac, true); ++ ++ err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, ++ KBUILD_MODNAME, net_dev); ++ if (err < 0) { ++ bgmac_err(bgmac, "IRQ request error: %d!\n", err); ++ goto err_out; ++ } ++ napi_enable(&bgmac->napi); ++ ++ netif_carrier_on(net_dev); ++ ++err_out: ++ return err; ++} ++ ++static int bgmac_stop(struct net_device *net_dev) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ ++ netif_carrier_off(net_dev); ++ ++ napi_disable(&bgmac->napi); ++ bgmac_chip_intrs_off(bgmac); ++ free_irq(bgmac->core->irq, net_dev); ++ ++ bgmac_chip_reset(bgmac); ++ ++ return 0; ++} ++ ++static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb, ++ struct net_device *net_dev) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ struct bgmac_dma_ring *ring; ++ ++ /* No QOS support yet */ ++ ring = &bgmac->tx_ring[0]; ++ return bgmac_dma_tx_add(bgmac, ring, skb); ++} ++ ++static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ struct mii_ioctl_data *data = if_mii(ifr); ++ ++ switch (cmd) { ++ case SIOCGMIIPHY: ++ data->phy_id = bgmac->phyaddr; ++ /* fallthru */ ++ case SIOCGMIIREG: ++ if (!netif_running(net_dev)) ++ return -EAGAIN; ++ data->val_out = bgmac_phy_read(bgmac, data->phy_id, ++ data->reg_num & 0x1f); ++ return 0; ++ case SIOCSMIIREG: ++ if (!netif_running(net_dev)) ++ return -EAGAIN; ++ bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f, ++ data->val_in); ++ return 0; ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++static const struct net_device_ops bgmac_netdev_ops = { ++ .ndo_open = bgmac_open, ++ .ndo_stop = bgmac_stop, ++ .ndo_start_xmit = bgmac_start_xmit, ++ .ndo_set_mac_address = eth_mac_addr, /* generic, sets dev_addr */ ++ .ndo_do_ioctl = bgmac_ioctl, ++}; ++ ++/************************************************** ++ * ethtool_ops ++ **************************************************/ ++ ++static int bgmac_get_settings(struct net_device *net_dev, ++ struct ethtool_cmd *cmd) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ ++ cmd->supported = SUPPORTED_10baseT_Half | ++ SUPPORTED_10baseT_Full | ++ SUPPORTED_100baseT_Half | ++ SUPPORTED_100baseT_Full | ++ SUPPORTED_1000baseT_Half | ++ SUPPORTED_1000baseT_Full | ++ SUPPORTED_Autoneg; ++ ++ if (bgmac->autoneg) { ++ WARN_ON(cmd->advertising); ++ if (bgmac->full_duplex) { ++ if (bgmac->speed & BGMAC_SPEED_10) ++ cmd->advertising |= ADVERTISED_10baseT_Full; ++ if (bgmac->speed & BGMAC_SPEED_100) ++ cmd->advertising |= ADVERTISED_100baseT_Full; ++ if (bgmac->speed & BGMAC_SPEED_1000) ++ cmd->advertising |= ADVERTISED_1000baseT_Full; ++ } else { ++ if (bgmac->speed & BGMAC_SPEED_10) ++ cmd->advertising |= ADVERTISED_10baseT_Half; ++ if (bgmac->speed & BGMAC_SPEED_100) ++ cmd->advertising |= ADVERTISED_100baseT_Half; ++ if (bgmac->speed & BGMAC_SPEED_1000) ++ cmd->advertising |= ADVERTISED_1000baseT_Half; ++ } ++ } else { ++ switch (bgmac->speed) { ++ case BGMAC_SPEED_10: ++ ethtool_cmd_speed_set(cmd, SPEED_10); ++ break; ++ case BGMAC_SPEED_100: ++ ethtool_cmd_speed_set(cmd, SPEED_100); ++ break; ++ case BGMAC_SPEED_1000: ++ ethtool_cmd_speed_set(cmd, SPEED_1000); ++ break; ++ } ++ } ++ ++ cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; ++ ++ cmd->autoneg = bgmac->autoneg; ++ ++ return 0; ++} ++ ++#if 0 ++static int bgmac_set_settings(struct net_device *net_dev, ++ struct ethtool_cmd *cmd) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ ++ return -1; ++} ++#endif ++ ++static void bgmac_get_drvinfo(struct net_device *net_dev, ++ struct ethtool_drvinfo *info) ++{ ++ strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); ++ strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info)); ++} ++ ++static const struct ethtool_ops bgmac_ethtool_ops = { ++ .get_settings = bgmac_get_settings, ++ .get_drvinfo = bgmac_get_drvinfo, ++}; ++ ++/************************************************** ++ * BCMA bus ops ++ **************************************************/ ++ ++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ ++static int bgmac_probe(struct bcma_device *core) ++{ ++ struct net_device *net_dev; ++ struct bgmac *bgmac; ++ struct ssb_sprom *sprom = &core->bus->sprom; ++ u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac; ++ int err; ++ ++ /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ ++ if (core->core_unit > 1) { ++ pr_err("Unsupported core_unit %d\n", core->core_unit); ++ return -ENOTSUPP; ++ } ++ ++ /* Allocation and references */ ++ net_dev = alloc_etherdev(sizeof(*bgmac)); ++ if (!net_dev) ++ return -ENOMEM; ++ net_dev->netdev_ops = &bgmac_netdev_ops; ++ net_dev->irq = core->irq; ++ SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops); ++ bgmac = netdev_priv(net_dev); ++ bgmac->net_dev = net_dev; ++ bgmac->core = core; ++ bcma_set_drvdata(core, bgmac); ++ ++ /* Defaults */ ++ bgmac->autoneg = true; ++ bgmac->full_duplex = true; ++ bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000; ++ memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN); ++ ++ /* On BCM4706 we need common core to access PHY */ ++ if (core->id.id == BCMA_CORE_4706_MAC_GBIT && ++ !core->bus->drv_gmac_cmn.core) { ++ bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n"); ++ err = -ENODEV; ++ goto err_netdev_free; ++ } ++ bgmac->cmn = core->bus->drv_gmac_cmn.core; ++ ++ bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : ++ sprom->et0phyaddr; ++ bgmac->phyaddr &= BGMAC_PHY_MASK; ++ if (bgmac->phyaddr == BGMAC_PHY_MASK) { ++ bgmac_err(bgmac, "No PHY found\n"); ++ err = -ENODEV; ++ goto err_netdev_free; ++ } ++ bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr, ++ bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); ++ ++ if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { ++ bgmac_err(bgmac, "PCI setup not implemented\n"); ++ err = -ENOTSUPP; ++ goto err_netdev_free; ++ } ++ ++ bgmac_chip_reset(bgmac); ++ ++ err = bgmac_dma_alloc(bgmac); ++ if (err) { ++ bgmac_err(bgmac, "Unable to alloc memory for DMA\n"); ++ goto err_netdev_free; ++ } ++ ++ bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK; ++ if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0) ++ bgmac->int_mask &= ~BGMAC_IS_TX_MASK; ++ ++ /* TODO: reset the external phy. Specs are needed */ ++ bgmac_phy_reset(bgmac); ++ ++ bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & ++ BGMAC_BFL_ENETROBO); ++ if (bgmac->has_robosw) ++ bgmac_warn(bgmac, "Support for Roboswitch not implemented\n"); ++ ++ if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) ++ bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n"); ++ ++ err = register_netdev(bgmac->net_dev); ++ if (err) { ++ bgmac_err(bgmac, "Cannot register net device\n"); ++ err = -ENOTSUPP; ++ goto err_dma_free; ++ } ++ ++ netif_carrier_off(net_dev); ++ ++ netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); ++ ++ return 0; ++ ++err_dma_free: ++ bgmac_dma_free(bgmac); ++ ++err_netdev_free: ++ bcma_set_drvdata(core, NULL); ++ free_netdev(net_dev); ++ ++ return err; ++} ++ ++static void bgmac_remove(struct bcma_device *core) ++{ ++ struct bgmac *bgmac = bcma_get_drvdata(core); ++ ++ netif_napi_del(&bgmac->napi); ++ unregister_netdev(bgmac->net_dev); ++ bgmac_dma_free(bgmac); ++ bcma_set_drvdata(core, NULL); ++ free_netdev(bgmac->net_dev); ++} ++ ++static struct bcma_driver bgmac_bcma_driver = { ++ .name = KBUILD_MODNAME, ++ .id_table = bgmac_bcma_tbl, ++ .probe = bgmac_probe, ++ .remove = bgmac_remove, ++}; ++ ++static int __init bgmac_init(void) ++{ ++ int err; ++ ++ err = bcma_driver_register(&bgmac_bcma_driver); ++ if (err) ++ return err; ++ pr_info("Broadcom 47xx GBit MAC driver loaded\n"); ++ ++ return 0; ++} ++ ++static void __exit bgmac_exit(void) ++{ ++ bcma_driver_unregister(&bgmac_bcma_driver); ++} ++ ++module_init(bgmac_init) ++module_exit(bgmac_exit) ++ ++MODULE_AUTHOR("Rafał Miłecki"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -0,0 +1,456 @@ ++#ifndef _BGMAC_H ++#define _BGMAC_H ++ ++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ++ ++#define bgmac_err(bgmac, fmt, ...) \ ++ dev_err(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) ++#define bgmac_warn(bgmac, fmt, ...) \ ++ dev_warn(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) ++#define bgmac_info(bgmac, fmt, ...) \ ++ dev_info(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) ++#define bgmac_dbg(bgmac, fmt, ...) \ ++ dev_dbg(&(bgmac)->core->dev, fmt, ##__VA_ARGS__) ++ ++#include ++#include ++ ++#define BGMAC_DEV_CTL 0x000 ++#define BGMAC_DC_TSM 0x00000002 ++#define BGMAC_DC_CFCO 0x00000004 ++#define BGMAC_DC_RLSS 0x00000008 ++#define BGMAC_DC_MROR 0x00000010 ++#define BGMAC_DC_FCM_MASK 0x00000060 ++#define BGMAC_DC_FCM_SHIFT 5 ++#define BGMAC_DC_NAE 0x00000080 ++#define BGMAC_DC_TF 0x00000100 ++#define BGMAC_DC_RDS_MASK 0x00030000 ++#define BGMAC_DC_RDS_SHIFT 16 ++#define BGMAC_DC_TDS_MASK 0x000c0000 ++#define BGMAC_DC_TDS_SHIFT 18 ++#define BGMAC_DEV_STATUS 0x004 /* Configuration of the interface */ ++#define BGMAC_DS_RBF 0x00000001 ++#define BGMAC_DS_RDF 0x00000002 ++#define BGMAC_DS_RIF 0x00000004 ++#define BGMAC_DS_TBF 0x00000008 ++#define BGMAC_DS_TDF 0x00000010 ++#define BGMAC_DS_TIF 0x00000020 ++#define BGMAC_DS_PO 0x00000040 ++#define BGMAC_DS_MM_MASK 0x00000300 /* Mode of the interface */ ++#define BGMAC_DS_MM_SHIFT 8 ++#define BGMAC_BIST_STATUS 0x00c ++#define BGMAC_INT_STATUS 0x020 /* Interrupt status */ ++#define BGMAC_IS_MRO 0x00000001 ++#define BGMAC_IS_MTO 0x00000002 ++#define BGMAC_IS_TFD 0x00000004 ++#define BGMAC_IS_LS 0x00000008 ++#define BGMAC_IS_MDIO 0x00000010 ++#define BGMAC_IS_MR 0x00000020 ++#define BGMAC_IS_MT 0x00000040 ++#define BGMAC_IS_TO 0x00000080 ++#define BGMAC_IS_DESC_ERR 0x00000400 /* Descriptor error */ ++#define BGMAC_IS_DATA_ERR 0x00000800 /* Data error */ ++#define BGMAC_IS_DESC_PROT_ERR 0x00001000 /* Descriptor protocol error */ ++#define BGMAC_IS_RX_DESC_UNDERF 0x00002000 /* Receive descriptor underflow */ ++#define BGMAC_IS_RX_F_OVERF 0x00004000 /* Receive FIFO overflow */ ++#define BGMAC_IS_TX_F_UNDERF 0x00008000 /* Transmit FIFO underflow */ ++#define BGMAC_IS_RX 0x00010000 /* Interrupt for RX queue 0 */ ++#define BGMAC_IS_TX0 0x01000000 /* Interrupt for TX queue 0 */ ++#define BGMAC_IS_TX1 0x02000000 /* Interrupt for TX queue 1 */ ++#define BGMAC_IS_TX2 0x04000000 /* Interrupt for TX queue 2 */ ++#define BGMAC_IS_TX3 0x08000000 /* Interrupt for TX queue 3 */ ++#define BGMAC_IS_TX_MASK 0x0f000000 ++#define BGMAC_IS_INTMASK 0x0f01fcff ++#define BGMAC_IS_ERRMASK 0x0000fc00 ++#define BGMAC_INT_MASK 0x024 /* Interrupt mask */ ++#define BGMAC_GP_TIMER 0x028 ++#define BGMAC_INT_RECV_LAZY 0x100 ++#define BGMAC_IRL_TO_MASK 0x00ffffff ++#define BGMAC_IRL_FC_MASK 0xff000000 ++#define BGMAC_IRL_FC_SHIFT 24 /* Shift the number of interrupts triggered per received frame */ ++#define BGMAC_FLOW_CTL_THRESH 0x104 /* Flow control thresholds */ ++#define BGMAC_WRRTHRESH 0x108 ++#define BGMAC_GMAC_IDLE_CNT_THRESH 0x10c ++#define BGMAC_PHY_ACCESS 0x180 /* PHY access address */ ++#define BGMAC_PA_DATA_MASK 0x0000ffff ++#define BGMAC_PA_ADDR_MASK 0x001f0000 ++#define BGMAC_PA_ADDR_SHIFT 16 ++#define BGMAC_PA_REG_MASK 0x1f000000 ++#define BGMAC_PA_REG_SHIFT 24 ++#define BGMAC_PA_WRITE 0x20000000 ++#define BGMAC_PA_START 0x40000000 ++#define BGMAC_PHY_CNTL 0x188 /* PHY control address */ ++#define BGMAC_PC_EPA_MASK 0x0000001f ++#define BGMAC_PC_MCT_MASK 0x007f0000 ++#define BGMAC_PC_MCT_SHIFT 16 ++#define BGMAC_PC_MTE 0x00800000 ++#define BGMAC_TXQ_CTL 0x18c ++#define BGMAC_TXQ_CTL_DBT_MASK 0x00000fff ++#define BGMAC_TXQ_CTL_DBT_SHIFT 0 ++#define BGMAC_RXQ_CTL 0x190 ++#define BGMAC_RXQ_CTL_DBT_MASK 0x00000fff ++#define BGMAC_RXQ_CTL_DBT_SHIFT 0 ++#define BGMAC_RXQ_CTL_PTE 0x00001000 ++#define BGMAC_RXQ_CTL_MDP_MASK 0x3f000000 ++#define BGMAC_RXQ_CTL_MDP_SHIFT 24 ++#define BGMAC_GPIO_SELECT 0x194 ++#define BGMAC_GPIO_OUTPUT_EN 0x198 ++/* For 0x1e0 see BCMA_CLKCTLST */ ++#define BGMAC_HW_WAR 0x1e4 ++#define BGMAC_PWR_CTL 0x1e8 ++#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */ ++#define BGMAC_DMA_BASE1 0x240 /* Tx controller only */ ++#define BGMAC_DMA_BASE2 0x280 /* Tx controller only */ ++#define BGMAC_DMA_BASE3 0x2C0 /* Tx controller only */ ++#define BGMAC_TX_GOOD_OCTETS 0x300 ++#define BGMAC_TX_GOOD_OCTETS_HIGH 0x304 ++#define BGMAC_TX_GOOD_PKTS 0x308 ++#define BGMAC_TX_OCTETS 0x30c ++#define BGMAC_TX_OCTETS_HIGH 0x310 ++#define BGMAC_TX_PKTS 0x314 ++#define BGMAC_TX_BROADCAST_PKTS 0x318 ++#define BGMAC_TX_MULTICAST_PKTS 0x31c ++#define BGMAC_TX_LEN_64 0x320 ++#define BGMAC_TX_LEN_65_TO_127 0x324 ++#define BGMAC_TX_LEN_128_TO_255 0x328 ++#define BGMAC_TX_LEN_256_TO_511 0x32c ++#define BGMAC_TX_LEN_512_TO_1023 0x330 ++#define BGMAC_TX_LEN_1024_TO_1522 0x334 ++#define BGMAC_TX_LEN_1523_TO_2047 0x338 ++#define BGMAC_TX_LEN_2048_TO_4095 0x33c ++#define BGMAC_TX_LEN_4095_TO_8191 0x340 ++#define BGMAC_TX_LEN_8192_TO_MAX 0x344 ++#define BGMAC_TX_JABBER_PKTS 0x348 /* Error */ ++#define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */ ++#define BGMAC_TX_FRAGMENT_PKTS 0x350 ++#define BGMAC_TX_UNDERRUNS 0x354 /* Error */ ++#define BGMAC_TX_TOTAL_COLS 0x358 ++#define BGMAC_TX_SINGLE_COLS 0x35c ++#define BGMAC_TX_MULTIPLE_COLS 0x360 ++#define BGMAC_TX_EXCESSIVE_COLS 0x364 /* Error */ ++#define BGMAC_TX_LATE_COLS 0x368 /* Error */ ++#define BGMAC_TX_DEFERED 0x36c ++#define BGMAC_TX_CARRIER_LOST 0x370 ++#define BGMAC_TX_PAUSE_PKTS 0x374 ++#define BGMAC_TX_UNI_PKTS 0x378 ++#define BGMAC_TX_Q0_PKTS 0x37c ++#define BGMAC_TX_Q0_OCTETS 0x380 ++#define BGMAC_TX_Q0_OCTETS_HIGH 0x384 ++#define BGMAC_TX_Q1_PKTS 0x388 ++#define BGMAC_TX_Q1_OCTETS 0x38c ++#define BGMAC_TX_Q1_OCTETS_HIGH 0x390 ++#define BGMAC_TX_Q2_PKTS 0x394 ++#define BGMAC_TX_Q2_OCTETS 0x398 ++#define BGMAC_TX_Q2_OCTETS_HIGH 0x39c ++#define BGMAC_TX_Q3_PKTS 0x3a0 ++#define BGMAC_TX_Q3_OCTETS 0x3a4 ++#define BGMAC_TX_Q3_OCTETS_HIGH 0x3a8 ++#define BGMAC_RX_GOOD_OCTETS 0x3b0 ++#define BGMAC_RX_GOOD_OCTETS_HIGH 0x3b4 ++#define BGMAC_RX_GOOD_PKTS 0x3b8 ++#define BGMAC_RX_OCTETS 0x3bc ++#define BGMAC_RX_OCTETS_HIGH 0x3c0 ++#define BGMAC_RX_PKTS 0x3c4 ++#define BGMAC_RX_BROADCAST_PKTS 0x3c8 ++#define BGMAC_RX_MULTICAST_PKTS 0x3cc ++#define BGMAC_RX_LEN_64 0x3d0 ++#define BGMAC_RX_LEN_65_TO_127 0x3d4 ++#define BGMAC_RX_LEN_128_TO_255 0x3d8 ++#define BGMAC_RX_LEN_256_TO_511 0x3dc ++#define BGMAC_RX_LEN_512_TO_1023 0x3e0 ++#define BGMAC_RX_LEN_1024_TO_1522 0x3e4 ++#define BGMAC_RX_LEN_1523_TO_2047 0x3e8 ++#define BGMAC_RX_LEN_2048_TO_4095 0x3ec ++#define BGMAC_RX_LEN_4095_TO_8191 0x3f0 ++#define BGMAC_RX_LEN_8192_TO_MAX 0x3f4 ++#define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */ ++#define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */ ++#define BGMAC_RX_FRAGMENT_PKTS 0x400 ++#define BGMAC_RX_MISSED_PKTS 0x404 /* Error */ ++#define BGMAC_RX_CRC_ALIGN_ERRS 0x408 /* Error */ ++#define BGMAC_RX_UNDERSIZE 0x40c /* Error */ ++#define BGMAC_RX_CRC_ERRS 0x410 /* Error */ ++#define BGMAC_RX_ALIGN_ERRS 0x414 /* Error */ ++#define BGMAC_RX_SYMBOL_ERRS 0x418 /* Error */ ++#define BGMAC_RX_PAUSE_PKTS 0x41c ++#define BGMAC_RX_NONPAUSE_PKTS 0x420 ++#define BGMAC_RX_SACHANGES 0x424 ++#define BGMAC_RX_UNI_PKTS 0x428 ++#define BGMAC_UNIMAC_VERSION 0x800 ++#define BGMAC_HDBKP_CTL 0x804 ++#define BGMAC_CMDCFG 0x808 /* Configuration */ ++#define BGMAC_CMDCFG_TE 0x00000001 /* Set to activate TX */ ++#define BGMAC_CMDCFG_RE 0x00000002 /* Set to activate RX */ ++#define BGMAC_CMDCFG_ES_MASK 0x0000000c /* Ethernet speed see gmac_speed */ ++#define BGMAC_CMDCFG_ES_10 0x00000000 ++#define BGMAC_CMDCFG_ES_100 0x00000004 ++#define BGMAC_CMDCFG_ES_1000 0x00000008 ++#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */ ++#define BGMAC_CMDCFG_PAD_EN 0x00000020 ++#define BGMAC_CMDCFG_CF 0x00000040 ++#define BGMAC_CMDCFG_PF 0x00000080 ++#define BGMAC_CMDCFG_RPI 0x00000100 /* Unset to enable 802.3x tx flow control */ ++#define BGMAC_CMDCFG_TAI 0x00000200 ++#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */ ++#define BGMAC_CMDCFG_HD_SHIFT 10 ++#define BGMAC_CMDCFG_SR 0x00000800 /* Set to reset mode */ ++#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */ ++#define BGMAC_CMDCFG_AE 0x00400000 ++#define BGMAC_CMDCFG_CFE 0x00800000 ++#define BGMAC_CMDCFG_NLC 0x01000000 ++#define BGMAC_CMDCFG_RL 0x02000000 ++#define BGMAC_CMDCFG_RED 0x04000000 ++#define BGMAC_CMDCFG_PE 0x08000000 ++#define BGMAC_CMDCFG_TPI 0x10000000 ++#define BGMAC_CMDCFG_AT 0x20000000 ++#define BGMAC_MACADDR_HIGH 0x80c /* High 4 octets of own mac address */ ++#define BGMAC_MACADDR_LOW 0x810 /* Low 2 octets of own mac address */ ++#define BGMAC_RXMAX_LENGTH 0x814 /* Max receive frame length with vlan tag */ ++#define BGMAC_PAUSEQUANTA 0x818 ++#define BGMAC_MAC_MODE 0x844 ++#define BGMAC_OUTERTAG 0x848 ++#define BGMAC_INNERTAG 0x84c ++#define BGMAC_TXIPG 0x85c ++#define BGMAC_PAUSE_CTL 0xb30 ++#define BGMAC_TX_FLUSH 0xb34 ++#define BGMAC_RX_STATUS 0xb38 ++#define BGMAC_TX_STATUS 0xb3c ++ ++#define BGMAC_PHY_CTL 0x00 ++#define BGMAC_PHY_CTL_SPEED_MSB 0x0040 ++#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */ ++#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */ ++#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */ ++#define BGMAC_PHY_CTL_SPEED 0x2000 ++#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */ ++#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */ ++/* Helpers */ ++#define BGMAC_PHY_CTL_SPEED_10 0 ++#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED ++#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB ++#define BGMAC_PHY_ADV 0x04 ++#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */ ++#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */ ++#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */ ++#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */ ++#define BGMAC_PHY_ADV2 0x09 ++#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */ ++#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */ ++ ++/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */ ++#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */ ++#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */ ++ ++/* BCMA GMAC core specific IO status (BCMA_IOST) flags */ ++#define BGMAC_BCMA_IOST_ATTACHED 0x00000800 ++ ++#define BGMAC_NUM_MIB_TX_REGS \ ++ (((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1) ++#define BGMAC_NUM_MIB_RX_REGS \ ++ (((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1) ++ ++#define BGMAC_DMA_TX_CTL 0x00 ++#define BGMAC_DMA_TX_ENABLE 0x00000001 ++#define BGMAC_DMA_TX_SUSPEND 0x00000002 ++#define BGMAC_DMA_TX_LOOPBACK 0x00000004 ++#define BGMAC_DMA_TX_FLUSH 0x00000010 ++#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800 ++#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000 ++#define BGMAC_DMA_TX_ADDREXT_SHIFT 16 ++#define BGMAC_DMA_TX_INDEX 0x04 ++#define BGMAC_DMA_TX_RINGLO 0x08 ++#define BGMAC_DMA_TX_RINGHI 0x0C ++#define BGMAC_DMA_TX_STATUS 0x10 ++#define BGMAC_DMA_TX_STATDPTR 0x00001FFF ++#define BGMAC_DMA_TX_STAT 0xF0000000 ++#define BGMAC_DMA_TX_STAT_DISABLED 0x00000000 ++#define BGMAC_DMA_TX_STAT_ACTIVE 0x10000000 ++#define BGMAC_DMA_TX_STAT_IDLEWAIT 0x20000000 ++#define BGMAC_DMA_TX_STAT_STOPPED 0x30000000 ++#define BGMAC_DMA_TX_STAT_SUSP 0x40000000 ++#define BGMAC_DMA_TX_ERROR 0x14 ++#define BGMAC_DMA_TX_ERRDPTR 0x0001FFFF ++#define BGMAC_DMA_TX_ERR 0xF0000000 ++#define BGMAC_DMA_TX_ERR_NOERR 0x00000000 ++#define BGMAC_DMA_TX_ERR_PROT 0x10000000 ++#define BGMAC_DMA_TX_ERR_UNDERRUN 0x20000000 ++#define BGMAC_DMA_TX_ERR_TRANSFER 0x30000000 ++#define BGMAC_DMA_TX_ERR_DESCREAD 0x40000000 ++#define BGMAC_DMA_TX_ERR_CORE 0x50000000 ++#define BGMAC_DMA_RX_CTL 0x20 ++#define BGMAC_DMA_RX_ENABLE 0x00000001 ++#define BGMAC_DMA_RX_FRAME_OFFSET_MASK 0x000000FE ++#define BGMAC_DMA_RX_FRAME_OFFSET_SHIFT 1 ++#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100 ++#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400 ++#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800 ++#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000 ++#define BGMAC_DMA_RX_ADDREXT_SHIFT 16 ++#define BGMAC_DMA_RX_INDEX 0x24 ++#define BGMAC_DMA_RX_RINGLO 0x28 ++#define BGMAC_DMA_RX_RINGHI 0x2C ++#define BGMAC_DMA_RX_STATUS 0x30 ++#define BGMAC_DMA_RX_STATDPTR 0x00001FFF ++#define BGMAC_DMA_RX_STAT 0xF0000000 ++#define BGMAC_DMA_RX_STAT_DISABLED 0x00000000 ++#define BGMAC_DMA_RX_STAT_ACTIVE 0x10000000 ++#define BGMAC_DMA_RX_STAT_IDLEWAIT 0x20000000 ++#define BGMAC_DMA_RX_STAT_STOPPED 0x30000000 ++#define BGMAC_DMA_RX_STAT_SUSP 0x40000000 ++#define BGMAC_DMA_RX_ERROR 0x34 ++#define BGMAC_DMA_RX_ERRDPTR 0x0001FFFF ++#define BGMAC_DMA_RX_ERR 0xF0000000 ++#define BGMAC_DMA_RX_ERR_NOERR 0x00000000 ++#define BGMAC_DMA_RX_ERR_PROT 0x10000000 ++#define BGMAC_DMA_RX_ERR_UNDERRUN 0x20000000 ++#define BGMAC_DMA_RX_ERR_TRANSFER 0x30000000 ++#define BGMAC_DMA_RX_ERR_DESCREAD 0x40000000 ++#define BGMAC_DMA_RX_ERR_CORE 0x50000000 ++ ++#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */ ++#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */ ++#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */ ++#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */ ++#define BGMAC_DESC_CTL1_LEN 0x00001FFF ++ ++#define BGMAC_PHY_NOREGS 0x1E ++#define BGMAC_PHY_MASK 0x1F ++ ++#define BGMAC_MAX_TX_RINGS 4 ++#define BGMAC_MAX_RX_RINGS 1 ++ ++#define BGMAC_TX_RING_SLOTS 128 ++#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */ ++ ++#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */ ++#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */ ++#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */ ++#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE) ++ ++#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */ ++#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */ ++#define BGMAC_BFL_ENETVLAN 0x0100 /* can do vlan */ ++ ++#define BGMAC_CHIPCTL_1_IF_TYPE_MASK 0x00000030 ++#define BGMAC_CHIPCTL_1_IF_TYPE_RMII 0x00000000 ++#define BGMAC_CHIPCTL_1_IF_TYPE_MI 0x00000010 ++#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII 0x00000020 ++#define BGMAC_CHIPCTL_1_SW_TYPE_MASK 0x000000C0 ++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000 ++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040 ++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080 ++#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0 ++#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000 ++ ++#define BGMAC_SPEED_10 0x0001 ++#define BGMAC_SPEED_100 0x0002 ++#define BGMAC_SPEED_1000 0x0004 ++ ++#define BGMAC_WEIGHT 64 ++ ++#define ETHER_MAX_LEN 1518 ++ ++struct bgmac_slot_info { ++ struct sk_buff *skb; ++ dma_addr_t dma_addr; ++}; ++ ++struct bgmac_dma_desc { ++ __le32 ctl0; ++ __le32 ctl1; ++ __le32 addr_low; ++ __le32 addr_high; ++} __packed; ++ ++enum bgmac_dma_ring_type { ++ BGMAC_DMA_RING_TX, ++ BGMAC_DMA_RING_RX, ++}; ++ ++/** ++ * bgmac_dma_ring - contains info about DMA ring (either TX or RX one) ++ * @start: index of the first slot containing data ++ * @end: index of a slot that can *not* be read (yet) ++ * ++ * Be really aware of the specific @end meaning. It's an index of a slot *after* ++ * the one containing data that can be read. If @start equals @end the ring is ++ * empty. ++ */ ++struct bgmac_dma_ring { ++ u16 num_slots; ++ u16 start; ++ u16 end; ++ ++ u16 mmio_base; ++ struct bgmac_dma_desc *cpu_base; ++ dma_addr_t dma_base; ++ ++ struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS]; ++}; ++ ++struct bgmac_rx_header { ++ __le16 len; ++ __le16 flags; ++ __le16 pad[12]; ++}; ++ ++struct bgmac { ++ struct bcma_device *core; ++ struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */ ++ struct net_device *net_dev; ++ struct napi_struct napi; ++ ++ /* DMA */ ++ struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS]; ++ struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS]; ++ ++ /* Stats */ ++ bool stats_grabbed; ++ u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS]; ++ u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS]; ++ ++ /* Int */ ++ u32 int_mask; ++ u32 int_status; ++ ++ /* Speed-related */ ++ int speed; ++ bool autoneg; ++ bool full_duplex; ++ ++ u8 phyaddr; ++ bool has_robosw; ++ ++ bool loopback; ++}; ++ ++static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset) ++{ ++ return bcma_read32(bgmac->core, offset); ++} ++ ++static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value) ++{ ++ bcma_write32(bgmac->core, offset, value); ++} ++ ++static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask, ++ u32 set) ++{ ++ bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set); ++} ++ ++static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask) ++{ ++ bgmac_maskset(bgmac, offset, mask, 0); ++} ++ ++static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set) ++{ ++ bgmac_maskset(bgmac, offset, ~0, set); ++} ++ ++u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg); ++void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value); ++ ++#endif /* _BGMAC_H */ +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -623,4 +623,6 @@ extern void bcma_chipco_regctl_maskset(s + u32 offset, u32 mask, u32 set); + extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); + ++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc); ++ + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/target/linux/brcm47xx/patches-3.8/760-bgmac-fixes.patch b/target/linux/brcm47xx/patches-3.8/760-bgmac-fixes.patch new file mode 100644 index 0000000000..d764806cf3 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/760-bgmac-fixes.patch @@ -0,0 +1,190 @@ +--- a/drivers/net/ethernet/broadcom/bgmac.c ++++ b/drivers/net/ethernet/broadcom/bgmac.c +@@ -301,7 +301,7 @@ static int bgmac_dma_rx_read(struct bgma + bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", + ring->start); + } else { +- new_skb = netdev_alloc_skb(bgmac->net_dev, len); ++ new_skb = netdev_alloc_skb_ip_align(bgmac->net_dev, len); + if (new_skb) { + skb_put(new_skb, len); + skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET, +@@ -535,7 +535,7 @@ static void bgmac_dma_init(struct bgmac + * PHY ops + **************************************************/ + +-u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) ++static u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) + { + struct bcma_device *core; + u16 phy_access_addr; +@@ -584,7 +584,7 @@ u16 bgmac_phy_read(struct bgmac *bgmac, + } + + /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ +-void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) ++static int bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) + { + struct bcma_device *core; + u16 phy_access_addr; +@@ -617,9 +617,13 @@ void bgmac_phy_write(struct bgmac *bgmac + tmp |= value; + bcma_write32(core, phy_access_addr, tmp); + +- if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) ++ if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { + bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", + phyaddr, reg); ++ return -ETIMEDOUT; ++ } ++ ++ return 0; + } + + /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */ +@@ -761,6 +765,26 @@ static void bgmac_cmdcfg_maskset(struct + udelay(2); + } + ++static void bgmac_write_mac_address(struct bgmac *bgmac, u8 *addr) ++{ ++ u32 tmp; ++ ++ tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; ++ bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); ++ tmp = (addr[4] << 8) | addr[5]; ++ bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); ++} ++ ++static void bgmac_set_rx_mode(struct net_device *net_dev) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ ++ if (net_dev->flags & IFF_PROMISC) ++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, true); ++ else ++ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, true); ++} ++ + #if 0 /* We don't use that regs yet */ + static void bgmac_chip_stats_update(struct bgmac *bgmac) + { +@@ -889,8 +913,10 @@ static void bgmac_chip_reset(struct bgma + sw_type = et_swtype; + } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) { + sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; +- } else if (0) { +- /* TODO */ ++ } else if ((ci->id != BCMA_CHIP_ID_BCM53572 && ci->pkg == 10) || ++ (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) { ++ sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII | ++ BGMAC_CHIPCTL_1_SW_TYPE_RGMII; + } + bcma_chipco_chipctl_maskset(cc, 1, + ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | +@@ -948,6 +974,7 @@ static void bgmac_chip_intrs_on(struct b + static void bgmac_chip_intrs_off(struct bgmac *bgmac) + { + bgmac_write(bgmac, BGMAC_INT_MASK, 0); ++ bgmac_read(bgmac, BGMAC_INT_MASK); + } + + /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ +@@ -1004,8 +1031,6 @@ static void bgmac_enable(struct bgmac *b + static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) + { + struct bgmac_dma_ring *ring; +- u8 *mac = bgmac->net_dev->dev_addr; +- u32 tmp; + int i; + + /* 1 interrupt per received frame */ +@@ -1014,21 +1039,14 @@ static void bgmac_chip_init(struct bgmac + /* Enable 802.3x tx flow control (honor received PAUSE frames) */ + bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); + +- if (bgmac->net_dev->flags & IFF_PROMISC) +- bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false); +- else +- bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false); ++ bgmac_set_rx_mode(bgmac->net_dev); + +- /* Set MAC addr */ +- tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; +- bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); +- tmp = (mac[4] << 8) | mac[5]; +- bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); ++ bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr); + + if (bgmac->loopback) +- bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true); ++ bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); + else +- bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true); ++ bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, false); + + bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); + +@@ -1160,6 +1178,19 @@ static netdev_tx_t bgmac_start_xmit(stru + return bgmac_dma_tx_add(bgmac, ring, skb); + } + ++static int bgmac_set_mac_address(struct net_device *net_dev, void *addr) ++{ ++ struct bgmac *bgmac = netdev_priv(net_dev); ++ int ret; ++ ++ ret = eth_prepare_mac_addr_change(net_dev, addr); ++ if (ret < 0) ++ return ret; ++ bgmac_write_mac_address(bgmac, (u8 *)addr); ++ eth_commit_mac_addr_change(net_dev, addr); ++ return 0; ++} ++ + static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) + { + struct bgmac *bgmac = netdev_priv(net_dev); +@@ -1190,7 +1221,9 @@ static const struct net_device_ops bgmac + .ndo_open = bgmac_open, + .ndo_stop = bgmac_stop, + .ndo_start_xmit = bgmac_start_xmit, +- .ndo_set_mac_address = eth_mac_addr, /* generic, sets dev_addr */ ++ .ndo_set_rx_mode = bgmac_set_rx_mode, ++ .ndo_set_mac_address = bgmac_set_mac_address, ++ .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = bgmac_ioctl, + }; + +@@ -1290,6 +1323,12 @@ static int bgmac_probe(struct bcma_devic + return -ENOTSUPP; + } + ++ if (!is_valid_ether_addr(mac)) { ++ dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac); ++ eth_random_addr(mac); ++ dev_warn(&core->dev, "Using random MAC: %pM\n", mac); ++ } ++ + /* Allocation and references */ + net_dev = alloc_etherdev(sizeof(*bgmac)); + if (!net_dev) +--- a/drivers/net/ethernet/broadcom/bgmac.h ++++ b/drivers/net/ethernet/broadcom/bgmac.h +@@ -339,7 +339,7 @@ + #define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000 + #define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040 + #define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080 +-#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI 0x000000C0 ++#define BGMAC_CHIPCTL_1_SW_TYPE_RGMII 0x000000C0 + #define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000 + + #define BGMAC_SPEED_10 0x0001 +@@ -450,7 +450,4 @@ static inline void bgmac_set(struct bgma + bgmac_maskset(bgmac, offset, ~0, set); + } + +-u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg); +-void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value); +- + #endif /* _BGMAC_H */ diff --git a/target/linux/brcm47xx/patches-3.8/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.8/812-disable_wgt634u_crap.patch new file mode 100644 index 0000000000..10ebcb4c64 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/812-disable_wgt634u_crap.patch @@ -0,0 +1,184 @@ +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -6,4 +6,3 @@ + obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o + obj-y += board.o + obj-y += gpio.o +-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o +--- a/arch/mips/bcm47xx/wgt634u.c ++++ /dev/null +@@ -1,174 +0,0 @@ +-/* +- * This file is subject to the terms and conditions of the GNU General Public +- * License. See the file "COPYING" in the main directory of this archive +- * for more details. +- * +- * Copyright (C) 2007 Aurelien Jarno +- */ +- +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +- +-/* GPIO definitions for the WGT634U */ +-#define WGT634U_GPIO_LED 3 +-#define WGT634U_GPIO_RESET 2 +-#define WGT634U_GPIO_TP1 7 +-#define WGT634U_GPIO_TP2 6 +-#define WGT634U_GPIO_TP3 5 +-#define WGT634U_GPIO_TP4 4 +-#define WGT634U_GPIO_TP5 1 +- +-static struct gpio_led wgt634u_leds[] = { +- { +- .name = "power", +- .gpio = WGT634U_GPIO_LED, +- .active_low = 1, +- .default_trigger = "heartbeat", +- }, +-}; +- +-static struct gpio_led_platform_data wgt634u_led_data = { +- .num_leds = ARRAY_SIZE(wgt634u_leds), +- .leds = wgt634u_leds, +-}; +- +-static struct platform_device wgt634u_gpio_leds = { +- .name = "leds-gpio", +- .id = -1, +- .dev = { +- .platform_data = &wgt634u_led_data, +- } +-}; +- +- +-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U +- firmware. */ +-static struct mtd_partition wgt634u_partitions[] = { +- { +- .name = "cfe", +- .offset = 0, +- .size = 0x60000, /* 384k */ +- .mask_flags = MTD_WRITEABLE /* force read-only */ +- }, +- { +- .name = "config", +- .offset = 0x60000, +- .size = 0x20000 /* 128k */ +- }, +- { +- .name = "linux", +- .offset = 0x80000, +- .size = 0x140000 /* 1280k */ +- }, +- { +- .name = "jffs", +- .offset = 0x1c0000, +- .size = 0x620000 /* 6272k */ +- }, +- { +- .name = "nvram", +- .offset = 0x7e0000, +- .size = 0x20000 /* 128k */ +- }, +-}; +- +-static struct physmap_flash_data wgt634u_flash_data = { +- .parts = wgt634u_partitions, +- .nr_parts = ARRAY_SIZE(wgt634u_partitions) +-}; +- +-static struct resource wgt634u_flash_resource = { +- .flags = IORESOURCE_MEM, +-}; +- +-static struct platform_device wgt634u_flash = { +- .name = "physmap-flash", +- .id = 0, +- .dev = { .platform_data = &wgt634u_flash_data, }, +- .resource = &wgt634u_flash_resource, +- .num_resources = 1, +-}; +- +-/* Platform devices */ +-static struct platform_device *wgt634u_devices[] __initdata = { +- &wgt634u_flash, +- &wgt634u_gpio_leds, +-}; +- +-static irqreturn_t gpio_interrupt(int irq, void *ignored) +-{ +- int state; +- +- /* Interrupts are shared, check if the current one is +- a GPIO interrupt. */ +- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco, +- SSB_CHIPCO_IRQ_GPIO)) +- return IRQ_NONE; +- +- state = gpio_get_value(WGT634U_GPIO_RESET); +- +- /* Interrupt are level triggered, revert the interrupt polarity +- to clear the interrupt. */ +- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET, +- state ? 1 << WGT634U_GPIO_RESET : 0); +- +- if (!state) { +- printk(KERN_INFO "Reset button pressed"); +- ctrl_alt_del(); +- } +- +- return IRQ_HANDLED; +-} +- +-static int __init wgt634u_init(void) +-{ +- /* There is no easy way to detect that we are running on a WGT634U +- * machine. Use the MAC address as an heuristic. Netgear Inc. has +- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx. +- */ +- u8 *et0mac; +- +- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) +- return -ENODEV; +- +- et0mac = bcm47xx_bus.ssb.sprom.et0mac; +- +- if (et0mac[0] == 0x00 && +- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) || +- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) { +- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore; +- +- printk(KERN_INFO "WGT634U machine detected.\n"); +- +- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET), +- gpio_interrupt, IRQF_SHARED, +- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) { +- gpio_direction_input(WGT634U_GPIO_RESET); +- ssb_gpio_intmask(&bcm47xx_bus.ssb, +- 1 << WGT634U_GPIO_RESET, +- 1 << WGT634U_GPIO_RESET); +- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco, +- SSB_CHIPCO_IRQ_GPIO, +- SSB_CHIPCO_IRQ_GPIO); +- } +- +- wgt634u_flash_data.width = mcore->pflash.buswidth; +- wgt634u_flash_resource.start = mcore->pflash.window; +- wgt634u_flash_resource.end = mcore->pflash.window +- + mcore->pflash.window_size +- - 1; +- return platform_add_devices(wgt634u_devices, +- ARRAY_SIZE(wgt634u_devices)); +- } else +- return -ENODEV; +-} +- +-module_init(wgt634u_init); diff --git a/target/linux/brcm47xx/patches-3.8/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.8/820-wgt634u-nvram-fix.patch new file mode 100644 index 0000000000..2c135a1115 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/820-wgt634u-nvram-fix.patch @@ -0,0 +1,306 @@ +The Netgear wgt634u uses a different format for storing the +configuration. This patch is needed to read out the correct +configuration. The cfe_env.c file uses a different method way to read +out the configuration than the in kernel cfe config reader. + +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -6,3 +6,4 @@ + obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o + obj-y += board.o + obj-y += gpio.o ++obj-y += cfe_env.o +--- /dev/null ++++ b/arch/mips/bcm47xx/cfe_env.c +@@ -0,0 +1,229 @@ ++/* ++ * CFE environment variable access ++ * ++ * Copyright 2001-2003, Broadcom Corporation ++ * Copyright 2006, Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define NVRAM_SIZE (0x1ff0) ++static char _nvdata[NVRAM_SIZE]; ++static char _valuestr[256]; ++ ++/* ++ * TLV types. These codes are used in the "type-length-value" ++ * encoding of the items stored in the NVRAM device (flash or EEPROM) ++ * ++ * The layout of the flash/nvram is as follows: ++ * ++ * ++ * ++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list. ++ * The "length" field marks the length of the data section, not ++ * including the type and length fields. ++ * ++ * Environment variables are stored as follows: ++ * ++ * = ++ * ++ * If bit 0 (low bit) is set, the length is an 8-bit value. ++ * If bit 0 (low bit) is clear, the length is a 16-bit value ++ * ++ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still ++ * indicates the size of the length field. ++ * ++ * Flags are from the constants below: ++ * ++ */ ++#define ENV_LENGTH_16BITS 0x00 /* for low bit */ ++#define ENV_LENGTH_8BITS 0x01 ++ ++#define ENV_TYPE_USER 0x80 ++ ++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) ++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) ++ ++/* ++ * The actual TLV types we support ++ */ ++ ++#define ENV_TLV_TYPE_END 0x00 ++#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) ++ ++/* ++ * Environment variable flags ++ */ ++ ++#define ENV_FLG_NORMAL 0x00 /* normal read/write */ ++#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ ++#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ ++ ++#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ ++#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ ++ ++ ++/* ********************************************************************* ++ * _nvram_read(buffer,offset,length) ++ * ++ * Read data from the NVRAM device ++ * ++ * Input parameters: ++ * buffer - destination buffer ++ * offset - offset of data to read ++ * length - number of bytes to read ++ * ++ * Return value: ++ * number of bytes read, or <0 if error occured ++ ********************************************************************* */ ++static int ++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) ++{ ++ int i; ++ if (offset > NVRAM_SIZE) ++ return -1; ++ ++ for ( i = 0; i < length; i++) { ++ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; ++ } ++ return length; ++} ++ ++ ++static char* ++_strnchr(const char *dest,int c,size_t cnt) ++{ ++ while (*dest && (cnt > 0)) { ++ if (*dest == c) return (char *) dest; ++ dest++; ++ cnt--; ++ } ++ return NULL; ++} ++ ++ ++ ++/* ++ * Core support API: Externally visible. ++ */ ++ ++/* ++ * Get the value of an NVRAM variable ++ * @param name name of variable to get ++ * @return value of variable or NULL if undefined ++ */ ++ ++char* ++cfe_env_get(unsigned char *nv_buf, char* name) ++{ ++ int size; ++ unsigned char *buffer; ++ unsigned char *ptr; ++ unsigned char *envval; ++ unsigned int reclen; ++ unsigned int rectype; ++ int offset; ++ int flg; ++ ++ if (!strcmp(name, "nvram_type")) ++ return "cfe"; ++ ++ size = NVRAM_SIZE; ++ buffer = &_nvdata[0]; ++ ++ ptr = buffer; ++ offset = 0; ++ ++ /* Read the record type and length */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ ++ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { ++ ++ /* Adjust pointer for TLV type */ ++ rectype = *(ptr); ++ offset++; ++ size--; ++ ++ /* ++ * Read the length. It can be either 1 or 2 bytes ++ * depending on the code ++ */ ++ if (rectype & ENV_LENGTH_8BITS) { ++ /* Read the record type and length - 8 bits */ ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) { ++ goto error; ++ } ++ reclen = *(ptr); ++ size--; ++ offset++; ++ } ++ else { ++ /* Read the record type and length - 16 bits, MSB first */ ++ if (_nvram_read(nv_buf, ptr,offset,2) != 2) { ++ goto error; ++ } ++ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); ++ size -= 2; ++ offset += 2; ++ } ++ ++ if (reclen > size) ++ break; /* should not happen, bad NVRAM */ ++ ++ switch (rectype) { ++ case ENV_TLV_TYPE_ENV: ++ /* Read the TLV data */ ++ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) ++ goto error; ++ flg = *ptr++; ++ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); ++ if (envval) { ++ *envval++ = '\0'; ++ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); ++ _valuestr[(reclen-1)-(envval-ptr)] = '\0'; ++#if 0 ++ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); ++#endif ++ if(!strcmp(ptr, name)){ ++ return _valuestr; ++ } ++ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) ++ return _valuestr; ++ } ++ break; ++ ++ default: ++ /* Unknown TLV type, skip it. */ ++ break; ++ } ++ ++ /* ++ * Advance to next TLV ++ */ ++ ++ size -= (int)reclen; ++ offset += reclen; ++ ++ /* Read the next record type */ ++ ptr = buffer; ++ if (_nvram_read(nv_buf, ptr,offset,1) != 1) ++ goto error; ++ } ++ ++error: ++ return NULL; ++ ++} ++ +--- a/arch/mips/bcm47xx/nvram.c ++++ b/arch/mips/bcm47xx/nvram.c +@@ -22,6 +22,8 @@ + #include + + static char nvram_buf[NVRAM_SPACE]; ++static int cfe_env; ++extern char *cfe_env_get(char *nv_buf, const char *name); + + static u32 find_nvram_size(u32 end) + { +@@ -47,6 +49,26 @@ static int nvram_find_and_copy(u32 base, + u32 *src, *dst; + u32 size; + ++ cfe_env = 0; ++ ++ /* XXX: hack for supporting the CFE environment stuff on WGT634U */ ++ if (lim >= 8 * 1024 * 1024) { ++ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000); ++ dst = (u32 *) nvram_buf; ++ ++ if ((*src & 0xff00ff) == 0x000001) { ++ printk("early_nvram_init: WGT634U NVRAM found.\n"); ++ ++ for (i = 0; i < 0x1ff0; i++) { ++ if (*src == 0xFFFFFFFF) ++ break; ++ *dst++ = *src++; ++ } ++ cfe_env = 1; ++ return 0; ++ } ++ } ++ + /* TODO: when nvram is on nand flash check for bad blocks first. */ + off = FLASH_MIN; + while (off <= lim) { +@@ -181,6 +203,13 @@ int bcm47xx_nvram_getenv(char *name, cha + return err; + } + ++ if (cfe_env) { ++ value = cfe_env_get(nvram_buf, name); ++ if (!value) ++ return -ENOENT; ++ return snprintf(val, val_len, "%s", value); ++ } ++ + /* Look for name=value and return value */ + var = &nvram_buf[sizeof(struct nvram_header)]; + end = nvram_buf + sizeof(nvram_buf) - 2; +@@ -209,6 +238,9 @@ char *nvram_get(const char *name) + if (!nvram_buf[0]) + nvram_init(); + ++ if (cfe_env) ++ return cfe_env_get(nvram_buf, name); ++ + /* Look for name=value and return value */ + var = &nvram_buf[sizeof(struct nvram_header)]; + end = nvram_buf + sizeof(nvram_buf) - 2; diff --git a/target/linux/brcm47xx/patches-3.8/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.8/920-cache-wround.patch new file mode 100644 index 0000000000..31c24d0b3f --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/920-cache-wround.patch @@ -0,0 +1,138 @@ +--- a/arch/mips/include/asm/r4kcache.h ++++ b/arch/mips/include/asm/r4kcache.h +@@ -20,10 +20,28 @@ + #ifdef CONFIG_BCM47XX + #include + #include +-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE))) ++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg() ++ ++static inline unsigned long bcm4710_dummy_rreg(void) ++{ ++ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE)); ++} ++ ++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr)) ++ ++static inline unsigned long bcm4710_fill_tlb(void *addr) ++{ ++ return *(unsigned long *)addr; ++} ++ ++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr)) ++ ++static inline void bcm4710_protected_fill_tlb(void *addr) ++{ ++ unsigned long x; ++ get_dbe(x, (unsigned long *)addr);; ++} + +-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) +-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) + #else + #define BCM4710_DUMMY_RREG() + +--- a/arch/mips/mm/tlbex.c ++++ b/arch/mips/mm/tlbex.c +@@ -972,6 +972,9 @@ build_get_pgde32(u32 **p, unsigned int t + #endif + uasm_i_addu(p, ptr, tmp, ptr); + #else ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + UASM_i_LA_mostly(p, ptr, pgdc); + #endif + uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */ +@@ -1314,12 +1317,12 @@ static void __cpuinit build_r4000_tlb_re + /* No need for uasm_i_nop */ + } + +-#ifdef CONFIG_BCM47XX +- uasm_i_nop(&p); +-#endif + #ifdef CONFIG_64BIT + build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ + #else ++# ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++# endif + build_get_pgde32(&p, K0, K1); /* get pgd in K1 */ + #endif + +@@ -1331,6 +1334,9 @@ static void __cpuinit build_r4000_tlb_re + build_update_entries(&p, K0, K1); + build_tlb_write_entry(&p, &l, &r, tlb_random); + uasm_l_leave(&l, p); ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(&p); ++#endif + uasm_i_eret(&p); /* return from trap */ + } + #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT +@@ -1848,12 +1854,12 @@ build_r4000_tlbchange_handler_head(u32 * + { + struct work_registers wr = build_get_work_registers(p); + +-#ifdef CONFIG_BCM47XX +- uasm_i_nop(p); +-#endif + #ifdef CONFIG_64BIT + build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */ + #else ++# ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++# endif + build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */ + #endif + +@@ -1892,6 +1898,9 @@ build_r4000_tlbchange_handler_tail(u32 * + build_tlb_write_entry(p, l, r, tlb_indexed); + uasm_l_leave(l, *p); + build_restore_work_registers(p); ++#ifdef CONFIG_BCM47XX ++ uasm_i_nop(p); ++#endif + uasm_i_eret(p); /* return from trap */ + + #ifdef CONFIG_64BIT +--- a/arch/mips/kernel/genex.S ++++ b/arch/mips/kernel/genex.S +@@ -21,6 +21,19 @@ + #include + #include + ++#ifdef CONFIG_BCM47XX ++# ifdef eret ++# undef eret ++# endif ++# define eret \ ++ .set push; \ ++ .set noreorder; \ ++ nop; \ ++ nop; \ ++ eret; \ ++ .set pop; ++#endif ++ + #define PANIC_PIC(msg) \ + .set push; \ + .set reorder; \ +@@ -53,7 +66,6 @@ NESTED(except_vec3_generic, 0, sp) + .set noat + #ifdef CONFIG_BCM47XX + nop +- nop + #endif + #if R5432_CP0_INTERRUPT_WAR + mfc0 k0, CP0_INDEX +@@ -78,6 +90,9 @@ NESTED(except_vec3_r4000, 0, sp) + .set push + .set mips3 + .set noat ++#ifdef CONFIG_BCM47XX ++ nop ++#endif + mfc0 k1, CP0_CAUSE + li k0, 31<<2 + andi k1, k1, 0x7c diff --git a/target/linux/brcm47xx/patches-3.8/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.8/940-bcm47xx-yenta.patch new file mode 100644 index 0000000000..1739ff78ab --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/940-bcm47xx-yenta.patch @@ -0,0 +1,46 @@ +--- a/drivers/pcmcia/yenta_socket.c ++++ b/drivers/pcmcia/yenta_socket.c +@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru + * Probe for usable interrupts using the force + * register to generate bogus card status events. + */ ++#ifndef CONFIG_BCM47XX ++ /* WRT54G3G does not like this */ + cb_writel(socket, CB_SOCKET_EVENT, -1); + cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); + reg = exca_readb(socket, I365_CSCINT); +@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru + } + cb_writel(socket, CB_SOCKET_MASK, 0); + exca_writeb(socket, I365_CSCINT, reg); ++#endif + + mask = probe_irq_mask(val) & 0xffff; + +@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie + else + socket->socket.irq_mask = 0; + ++ /* irq mask probing is broken for the WRT54G3G */ ++ if (socket->socket.irq_mask == 0) ++ socket->socket.irq_mask = 0x6f8; ++ + dev_printk(KERN_INFO, &socket->dev->dev, + "ISA IRQ mask 0x%04x, PCI irq %d\n", + socket->socket.irq_mask, socket->cb_irq); +@@ -1257,6 +1264,15 @@ static int yenta_probe(struct pci_dev *d + dev_printk(KERN_INFO, &dev->dev, + "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE)); + ++ /* Generate an interrupt on card insert/remove */ ++ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK); ++ ++ /* Set up Multifunction Routing Status Register */ ++ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */); ++ ++ /* Switch interrupts to parallelized */ ++ config_writeb(socket, 0x92, 0x64); ++ + yenta_fixup_parent_bridge(dev->subordinate); + + /* Register it with the pcmcia layer.. */ diff --git a/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch new file mode 100644 index 0000000000..0dc2d5f635 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch @@ -0,0 +1,11 @@ +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -376,7 +376,7 @@ static void ssb_pcicore_init_hostmode(st + set_io_port_base(ssb_pcicore_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. */ +- mdelay(10); ++ mdelay(300); + register_pci_controller(&ssb_pcicore_controller); + } + diff --git a/target/linux/brcm47xx/patches-3.8/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.8/980-wnr834b_no_cardbus_invariant.patch new file mode 100644 index 0000000000..455067631a --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/980-wnr834b_no_cardbus_invariant.patch @@ -0,0 +1,13 @@ +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -120,6 +120,10 @@ static int bcm47xx_get_invariants(struct + if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) + iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); + ++ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */ ++ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot) ++ iv->has_cardbus_slot = 0; ++ + return 0; + } + diff --git a/target/linux/brcm47xx/patches-3.8/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.8/999-wl_exports.patch new file mode 100644 index 0000000000..d40f4670f6 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.8/999-wl_exports.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/bcm47xx/nvram.c ++++ b/arch/mips/bcm47xx/nvram.c +@@ -21,7 +21,8 @@ + #include + #include + +-static char nvram_buf[NVRAM_SPACE]; ++char nvram_buf[NVRAM_SPACE]; ++EXPORT_SYMBOL(nvram_buf); + static int cfe_env; + extern char *cfe_env_get(char *nv_buf, const char *name); + +--- a/arch/mips/mm/cache.c ++++ b/arch/mips/mm/cache.c +@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s + void (*_dma_cache_inv)(unsigned long start, unsigned long size); + + EXPORT_SYMBOL(_dma_cache_wback_inv); ++EXPORT_SYMBOL(_dma_cache_inv); + + #endif /* CONFIG_DMA_NONCOHERENT */ + diff --git a/target/linux/generic/patches-3.8/020-ssb_update.patch b/target/linux/generic/patches-3.8/020-ssb_update.patch new file mode 100644 index 0000000000..6cdfd2f730 --- /dev/null +++ b/target/linux/generic/patches-3.8/020-ssb_update.patch @@ -0,0 +1,365 @@ +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS + + If unsure, say N + ++config SSB_SFLASH ++ bool "SSB serial flash support" ++ depends on SSB_DRIVER_MIPS && BROKEN ++ default y ++ + # Assumption: We are on embedded, if we compile the MIPS core. + config SSB_EMBEDDED + bool +--- a/drivers/ssb/Makefile ++++ b/drivers/ssb/Makefile +@@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o + # built-in drivers + ssb-y += driver_chipcommon.o + ssb-y += driver_chipcommon_pmu.o ++ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o + ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o + ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o + ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o +--- /dev/null ++++ b/drivers/ssb/driver_chipcommon_sflash.c +@@ -0,0 +1,140 @@ ++/* ++ * Sonics Silicon Backplane ++ * ChipCommon serial flash interface ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include ++ ++#include "ssb_private.h" ++ ++struct ssb_sflash_tbl_e { ++ char *name; ++ u32 id; ++ u32 blocksize; ++ u16 numblocks; ++}; ++ ++static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { ++ { "M25P20", 0x11, 0x10000, 4, }, ++ { "M25P40", 0x12, 0x10000, 8, }, ++ ++ { "M25P16", 0x14, 0x10000, 32, }, ++ { "M25P32", 0x15, 0x10000, 64, }, ++ { "M25P64", 0x16, 0x10000, 128, }, ++ { "M25FL128", 0x17, 0x10000, 256, }, ++ { 0 }, ++}; ++ ++static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { ++ { "SST25WF512", 1, 0x1000, 16, }, ++ { "SST25VF512", 0x48, 0x1000, 16, }, ++ { "SST25WF010", 2, 0x1000, 32, }, ++ { "SST25VF010", 0x49, 0x1000, 32, }, ++ { "SST25WF020", 3, 0x1000, 64, }, ++ { "SST25VF020", 0x43, 0x1000, 64, }, ++ { "SST25WF040", 4, 0x1000, 128, }, ++ { "SST25VF040", 0x44, 0x1000, 128, }, ++ { "SST25VF040B", 0x8d, 0x1000, 128, }, ++ { "SST25WF080", 5, 0x1000, 256, }, ++ { "SST25VF080B", 0x8e, 0x1000, 256, }, ++ { "SST25VF016", 0x41, 0x1000, 512, }, ++ { "SST25VF032", 0x4a, 0x1000, 1024, }, ++ { "SST25VF064", 0x4b, 0x1000, 2048, }, ++ { 0 }, ++}; ++ ++static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { ++ { "AT45DB011", 0xc, 256, 512, }, ++ { "AT45DB021", 0x14, 256, 1024, }, ++ { "AT45DB041", 0x1c, 256, 2048, }, ++ { "AT45DB081", 0x24, 256, 4096, }, ++ { "AT45DB161", 0x2c, 512, 4096, }, ++ { "AT45DB321", 0x34, 512, 8192, }, ++ { "AT45DB642", 0x3c, 1024, 8192, }, ++ { 0 }, ++}; ++ ++static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode) ++{ ++ int i; ++ chipco_write32(cc, SSB_CHIPCO_FLASHCTL, ++ SSB_CHIPCO_FLASHCTL_START | opcode); ++ for (i = 0; i < 1000; i++) { ++ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) & ++ SSB_CHIPCO_FLASHCTL_BUSY)) ++ return; ++ cpu_relax(); ++ } ++ pr_err("SFLASH control command failed (timeout)!\n"); ++} ++ ++/* Initialize serial flash access */ ++int ssb_sflash_init(struct ssb_chipcommon *cc) ++{ ++ struct ssb_sflash_tbl_e *e; ++ u32 id, id2; ++ ++ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { ++ case SSB_CHIPCO_FLASHT_STSER: ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP); ++ ++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0); ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); ++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); ++ ++ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1); ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); ++ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); ++ ++ switch (id) { ++ case 0xbf: ++ for (e = ssb_sflash_sst_tbl; e->name; e++) { ++ if (e->id == id2) ++ break; ++ } ++ break; ++ case 0x13: ++ return -ENOTSUPP; ++ default: ++ for (e = ssb_sflash_st_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ break; ++ } ++ if (!e->name) { ++ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", ++ id, id2); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ case SSB_CHIPCO_FLASHT_ATSER: ++ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); ++ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c; ++ ++ for (e = ssb_sflash_at_tbl; e->name; e++) { ++ if (e->id == id) ++ break; ++ } ++ if (!e->name) { ++ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", ++ id); ++ return -ENOTSUPP; ++ } ++ ++ break; ++ default: ++ pr_err("Unsupported flash type\n"); ++ return -ENOTSUPP; ++ } ++ ++ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", ++ e->name, e->blocksize, e->numblocks); ++ ++ pr_err("Serial flash support is not implemented yet!\n"); ++ ++ return -ENOTSUPP; ++} +--- a/drivers/ssb/driver_gpio.c ++++ b/drivers/ssb/driver_gpio.c +@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct + ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0); + } + ++static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) ++ return ssb_mips_irq(bus->chipco.dev) + 2; ++ else ++ return -EINVAL; ++} ++ + static int ssb_gpio_chipco_init(struct ssb_bus *bus) + { + struct gpio_chip *chip = &bus->gpio; +@@ -86,6 +96,7 @@ static int ssb_gpio_chipco_init(struct s + chip->set = ssb_gpio_chipco_set_value; + chip->direction_input = ssb_gpio_chipco_direction_input; + chip->direction_output = ssb_gpio_chipco_direction_output; ++ chip->to_irq = ssb_gpio_chipco_to_irq; + chip->ngpio = 16; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +@@ -134,6 +145,16 @@ static int ssb_gpio_extif_direction_outp + return 0; + } + ++static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) ++ return ssb_mips_irq(bus->extif.dev) + 2; ++ else ++ return -EINVAL; ++} ++ + static int ssb_gpio_extif_init(struct ssb_bus *bus) + { + struct gpio_chip *chip = &bus->gpio; +@@ -144,6 +165,7 @@ static int ssb_gpio_extif_init(struct ss + chip->set = ssb_gpio_extif_set_value; + chip->direction_input = ssb_gpio_extif_direction_input; + chip->direction_output = ssb_gpio_extif_direction_output; ++ chip->to_irq = ssb_gpio_extif_to_irq; + chip->ngpio = 5; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -10,6 +10,7 @@ + + #include + ++#include + #include + #include + #include +@@ -17,6 +18,25 @@ + + #include "ssb_private.h" + ++static const char *part_probes[] = { "bcm47xxpart", NULL }; ++ ++static struct physmap_flash_data ssb_pflash_data = { ++ .part_probe_types = part_probes, ++}; ++ ++static struct resource ssb_pflash_resource = { ++ .name = "ssb_pflash", ++ .flags = IORESOURCE_MEM, ++}; ++ ++struct platform_device ssb_pflash_dev = { ++ .name = "physmap-flash", ++ .dev = { ++ .platform_data = &ssb_pflash_data, ++ }, ++ .resource = &ssb_pflash_resource, ++ .num_resources = 1, ++}; + + static inline u32 mips_read32(struct ssb_mipscore *mcore, + u16 offset) +@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct + static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) + { + struct ssb_bus *bus = mcore->dev->bus; ++ struct ssb_pflash *pflash = &mcore->pflash; + + /* When there is no chipcommon on the bus there is 4MB flash */ + if (!ssb_chipco_available(&bus->chipco)) { +- mcore->pflash.present = true; +- mcore->pflash.buswidth = 2; +- mcore->pflash.window = SSB_FLASH1; +- mcore->pflash.window_size = SSB_FLASH1_SZ; +- return; ++ pflash->present = true; ++ pflash->buswidth = 2; ++ pflash->window = SSB_FLASH1; ++ pflash->window_size = SSB_FLASH1_SZ; ++ goto ssb_pflash; + } + + /* There is ChipCommon, so use it to read info about flash */ + switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { + case SSB_CHIPCO_FLASHT_STSER: + case SSB_CHIPCO_FLASHT_ATSER: +- pr_err("Serial flash not supported\n"); ++ pr_debug("Found serial flash\n"); ++ ssb_sflash_init(&bus->chipco); + break; + case SSB_CHIPCO_FLASHT_PARA: + pr_debug("Found parallel flash\n"); +- mcore->pflash.present = true; +- mcore->pflash.window = SSB_FLASH2; +- mcore->pflash.window_size = SSB_FLASH2_SZ; ++ pflash->present = true; ++ pflash->window = SSB_FLASH2; ++ pflash->window_size = SSB_FLASH2_SZ; + if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) + & SSB_CHIPCO_CFG_DS16) == 0) +- mcore->pflash.buswidth = 1; ++ pflash->buswidth = 1; + else +- mcore->pflash.buswidth = 2; ++ pflash->buswidth = 2; + break; + } ++ ++ssb_pflash: ++ if (pflash->present) { ++ ssb_pflash_data.width = pflash->buswidth; ++ ssb_pflash_resource.start = pflash->window; ++ ssb_pflash_resource.end = pflash->window + pflash->window_size; ++ } + } + + u32 ssb_cpu_clock(struct ssb_mipscore *mcore) +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -549,6 +549,14 @@ static int ssb_devices_register(struct s + dev_idx++; + } + ++#ifdef CONFIG_SSB_DRIVER_MIPS ++ if (bus->mipscore.pflash.present) { ++ err = platform_device_register(&ssb_pflash_dev); ++ if (err) ++ pr_err("Error registering parallel flash\n"); ++ } ++#endif ++ + return 0; + error: + /* Unwind the already registered devices. */ +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -217,6 +217,21 @@ extern u32 ssb_chipco_watchdog_timer_set + u32 ticks); + extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); + ++/* driver_chipcommon_sflash.c */ ++#ifdef CONFIG_SSB_SFLASH ++int ssb_sflash_init(struct ssb_chipcommon *cc); ++#else ++static inline int ssb_sflash_init(struct ssb_chipcommon *cc) ++{ ++ pr_err("Serial flash not supported\n"); ++ return 0; ++} ++#endif /* CONFIG_SSB_SFLASH */ ++ ++#ifdef CONFIG_SSB_DRIVER_MIPS ++extern struct platform_device ssb_pflash_dev; ++#endif ++ + #ifdef CONFIG_SSB_DRIVER_EXTIF + extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); + extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); +--- a/include/linux/ssb/ssb_driver_mips.h ++++ b/include/linux/ssb/ssb_driver_mips.h +@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipsco + { + } + ++static inline unsigned int ssb_mips_irq(struct ssb_device *dev) ++{ ++ return 0; ++} ++ + #endif /* CONFIG_SSB_DRIVER_MIPS */ + + #endif /* LINUX_SSB_MIPSCORE_H_ */ diff --git a/target/linux/generic/patches-3.8/025-bcma_backport.patch b/target/linux/generic/patches-3.8/025-bcma_backport.patch new file mode 100644 index 0000000000..5a919a783a --- /dev/null +++ b/target/linux/generic/patches-3.8/025-bcma_backport.patch @@ -0,0 +1,659 @@ +--- a/arch/mips/bcm47xx/serial.c ++++ b/arch/mips/bcm47xx/serial.c +@@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(voi + + p->mapbase = (unsigned int) bcma_port->regs; + p->membase = (void *) bcma_port->regs; +- p->irq = bcma_port->irq + 2; ++ p->irq = bcma_port->irq; + p->uartclk = bcma_port->baud_base; + p->regshift = bcma_port->reg_shift; + p->iotype = UPIO_MEM; +--- a/drivers/bcma/bcma_private.h ++++ b/drivers/bcma/bcma_private.h +@@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struc + int bcma_bus_suspend(struct bcma_bus *bus); + int bcma_bus_resume(struct bcma_bus *bus); + #endif ++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, ++ u8 unit); + + /* scan.c */ + int bcma_bus_scan(struct bcma_bus *bus); +@@ -45,6 +47,7 @@ int bcma_sprom_get(struct bcma_bus *bus) + /* driver_chipcommon.c */ + #ifdef CONFIG_BCMA_DRIVER_MIPS + void bcma_chipco_serial_init(struct bcma_drv_cc *cc); ++extern struct platform_device bcma_pflash_dev; + #endif /* CONFIG_BCMA_DRIVER_MIPS */ + + /* driver_chipcommon_pmu.c */ +--- a/drivers/bcma/driver_chipcommon.c ++++ b/drivers/bcma/driver_chipcommon.c +@@ -329,7 +329,7 @@ void bcma_chipco_serial_init(struct bcma + return; + } + +- irq = bcma_core_mips_irq(cc->core); ++ irq = bcma_core_irq(cc->core); + + /* Determine the registers of the UARTs */ + cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); +--- a/drivers/bcma/driver_chipcommon_nflash.c ++++ b/drivers/bcma/driver_chipcommon_nflash.c +@@ -5,11 +5,11 @@ + * Licensed under the GNU/GPL. See COPYING for details. + */ + ++#include "bcma_private.h" ++ + #include + #include + +-#include "bcma_private.h" +- + struct platform_device bcma_nflash_dev = { + .name = "bcma_nflash", + .num_resources = 0, +--- a/drivers/bcma/driver_chipcommon_sflash.c ++++ b/drivers/bcma/driver_chipcommon_sflash.c +@@ -5,11 +5,11 @@ + * Licensed under the GNU/GPL. See COPYING for details. + */ + ++#include "bcma_private.h" ++ + #include + #include + +-#include "bcma_private.h" +- + static struct resource bcma_sflash_resource = { + .name = "bcma_sflash", + .start = BCMA_SOC_FLASH2, +--- a/drivers/bcma/driver_gpio.c ++++ b/drivers/bcma/driver_gpio.c +@@ -73,6 +73,16 @@ static void bcma_gpio_free(struct gpio_c + bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); + } + ++static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); ++ ++ if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) ++ return bcma_core_irq(cc->core); ++ else ++ return -EINVAL; ++} ++ + int bcma_gpio_init(struct bcma_drv_cc *cc) + { + struct gpio_chip *chip = &cc->gpio; +@@ -85,6 +95,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c + chip->set = bcma_gpio_set_value; + chip->direction_input = bcma_gpio_direction_input; + chip->direction_output = bcma_gpio_direction_output; ++ chip->to_irq = bcma_gpio_to_irq; + chip->ngpio = 16; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +--- a/drivers/bcma/driver_mips.c ++++ b/drivers/bcma/driver_mips.c +@@ -14,11 +14,33 @@ + + #include + ++#include ++#include + #include + #include + #include + #include + ++static const char *part_probes[] = { "bcm47xxpart", NULL }; ++ ++static struct physmap_flash_data bcma_pflash_data = { ++ .part_probe_types = part_probes, ++}; ++ ++static struct resource bcma_pflash_resource = { ++ .name = "bcma_pflash", ++ .flags = IORESOURCE_MEM, ++}; ++ ++struct platform_device bcma_pflash_dev = { ++ .name = "physmap-flash", ++ .dev = { ++ .platform_data = &bcma_pflash_data, ++ }, ++ .resource = &bcma_pflash_resource, ++ .num_resources = 1, ++}; ++ + /* The 47162a0 hangs when reading MIPS DMP registers registers */ + static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) + { +@@ -74,28 +96,41 @@ static u32 bcma_core_mips_irqflag(struct + return dev->core_index; + flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); + +- return flag & 0x1F; ++ if (flag) ++ return flag & 0x1F; ++ else ++ return 0x3f; + } + + /* Get the MIPS IRQ assignment for a specified device. + * If unassigned, 0 is returned. ++ * If disabled, 5 is returned. ++ * If not supported, 6 is returned. + */ +-unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++static unsigned int bcma_core_mips_irq(struct bcma_device *dev) + { + struct bcma_device *mdev = dev->bus->drv_mips.core; + u32 irqflag; + unsigned int irq; + + irqflag = bcma_core_mips_irqflag(dev); ++ if (irqflag == 0x3f) ++ return 6; + +- for (irq = 1; irq <= 4; irq++) ++ for (irq = 0; irq <= 4; irq++) + if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & + (1 << irqflag)) + return irq; + +- return 0; ++ return 5; + } +-EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++unsigned int bcma_core_irq(struct bcma_device *dev) ++{ ++ unsigned int mips_irq = bcma_core_mips_irq(dev); ++ return mips_irq <= 4 ? mips_irq + 2 : 0; ++} ++EXPORT_SYMBOL(bcma_core_irq); + + static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) + { +@@ -114,7 +149,7 @@ static void bcma_core_mips_set_irq(struc + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), + bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & + ~(1 << irqflag)); +- else ++ else if (oldirq != 5) + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); + + /* assign the new one */ +@@ -123,9 +158,9 @@ static void bcma_core_mips_set_irq(struc + bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | + (1 << irqflag)); + } else { +- u32 oldirqflag = bcma_read32(mdev, +- BCMA_MIPS_MIPS74K_INTMASK(irq)); +- if (oldirqflag) { ++ u32 irqinitmask = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (irqinitmask) { + struct bcma_device *core; + + /* backplane irq line is in use, find out who uses +@@ -133,7 +168,7 @@ static void bcma_core_mips_set_irq(struc + */ + list_for_each_entry(core, &bus->cores, list) { + if ((1 << bcma_core_mips_irqflag(core)) == +- oldirqflag) { ++ irqinitmask) { + bcma_core_mips_set_irq(core, 0); + break; + } +@@ -143,15 +178,31 @@ static void bcma_core_mips_set_irq(struc + 1 << irqflag); + } + +- bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n", +- dev->id.id, oldirq + 2, irq + 2); ++ bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); ++} ++ ++static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, ++ u16 coreid, u8 unit) ++{ ++ struct bcma_device *core; ++ ++ core = bcma_find_core_unit(bus, coreid, unit); ++ if (!core) { ++ bcma_warn(bus, ++ "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", ++ coreid, unit); ++ return; ++ } ++ ++ bcma_core_mips_set_irq(core, irq); + } + + static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) + { + int i; + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; +- printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); + for (i = 0; i <= 6; i++) + printk(" %s%s", irq_name[i], i == irq ? "*" : " "); + printk("\n"); +@@ -182,6 +233,7 @@ static void bcma_core_mips_flash_detect( + { + struct bcma_bus *bus = mcore->core->bus; + struct bcma_drv_cc *cc = &bus->drv_cc; ++ struct bcma_pflash *pflash = &cc->pflash; + + switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { + case BCMA_CC_FLASHT_STSER: +@@ -191,15 +243,20 @@ static void bcma_core_mips_flash_detect( + break; + case BCMA_CC_FLASHT_PARA: + bcma_debug(bus, "Found parallel flash\n"); +- cc->pflash.present = true; +- cc->pflash.window = BCMA_SOC_FLASH2; +- cc->pflash.window_size = BCMA_SOC_FLASH2_SZ; ++ pflash->present = true; ++ pflash->window = BCMA_SOC_FLASH2; ++ pflash->window_size = BCMA_SOC_FLASH2_SZ; + + if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & + BCMA_CC_FLASH_CFG_DS) == 0) +- cc->pflash.buswidth = 1; ++ pflash->buswidth = 1; + else +- cc->pflash.buswidth = 2; ++ pflash->buswidth = 2; ++ ++ bcma_pflash_data.width = pflash->buswidth; ++ bcma_pflash_resource.start = pflash->window; ++ bcma_pflash_resource.end = pflash->window + pflash->window_size; ++ + break; + default: + bcma_err(bus, "Flash type not supported\n"); +@@ -227,6 +284,32 @@ void bcma_core_mips_early_init(struct bc + mcore->early_setup_done = true; + } + ++static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) ++{ ++ struct bcma_device *cpu, *pcie, *i2s; ++ ++ /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) ++ * (IRQ flags > 7 are ignored when setting the interrupt masks) ++ */ ++ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && ++ bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) ++ return; ++ ++ cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); ++ pcie = bcma_find_core(bus, BCMA_CORE_PCIE); ++ i2s = bcma_find_core(bus, BCMA_CORE_I2S); ++ if (cpu && pcie && i2s && ++ bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && ++ bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && ++ bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { ++ bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); ++ bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); ++ bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); ++ bcma_debug(bus, ++ "Moved i2s interrupt to oob line 7 instead of 8\n"); ++ } ++} ++ + void bcma_core_mips_init(struct bcma_drv_mips *mcore) + { + struct bcma_bus *bus; +@@ -236,43 +319,55 @@ void bcma_core_mips_init(struct bcma_drv + if (mcore->setup_done) + return; + +- bcma_info(bus, "Initializing MIPS core...\n"); ++ bcma_debug(bus, "Initializing MIPS core...\n"); + + bcma_core_mips_early_init(mcore); + +- mcore->assigned_irqs = 1; ++ bcma_fix_i2s_irqflag(bus); + +- /* Assign IRQs to all cores on the bus */ +- list_for_each_entry(core, &bus->cores, list) { +- int mips_irq; +- if (core->irq) +- continue; +- +- mips_irq = bcma_core_mips_irq(core); +- if (mips_irq > 4) +- core->irq = 0; +- else +- core->irq = mips_irq + 2; +- if (core->irq > 5) +- continue; +- switch (core->id.id) { +- case BCMA_CORE_PCI: +- case BCMA_CORE_PCIE: +- case BCMA_CORE_ETHERNET: +- case BCMA_CORE_ETHERNET_GBIT: +- case BCMA_CORE_MAC_GBIT: +- case BCMA_CORE_80211: +- case BCMA_CORE_USB20_HOST: +- /* These devices get their own IRQ line if available, +- * the rest goes on IRQ0 +- */ +- if (mcore->assigned_irqs <= 4) +- bcma_core_mips_set_irq(core, +- mcore->assigned_irqs++); +- break; ++ switch (bus->chipinfo.id) { ++ case BCMA_CHIP_ID_BCM4716: ++ case BCMA_CHIP_ID_BCM4748: ++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); ++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); ++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); ++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); ++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); ++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); ++ break; ++ case BCMA_CHIP_ID_BCM5356: ++ case BCMA_CHIP_ID_BCM47162: ++ case BCMA_CHIP_ID_BCM53572: ++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); ++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); ++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); ++ break; ++ case BCMA_CHIP_ID_BCM5357: ++ case BCMA_CHIP_ID_BCM4749: ++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); ++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); ++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); ++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); ++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); ++ break; ++ case BCMA_CHIP_ID_BCM4706: ++ bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); ++ bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, ++ 0); ++ bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); ++ bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); ++ bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, ++ 0); ++ break; ++ default: ++ list_for_each_entry(core, &bus->cores, list) { ++ core->irq = bcma_core_irq(core); + } ++ bcma_err(bus, ++ "Unknown device (0x%x) found, can not configure IRQs\n", ++ bus->chipinfo.id); + } +- bcma_info(bus, "IRQ reconfiguration done\n"); ++ bcma_debug(bus, "IRQ reconfiguration done\n"); + bcma_core_mips_dump_irq(bus); + + mcore->setup_done = true; +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -94,19 +94,19 @@ static int bcma_extpci_read_config(struc + if (dev == 0) { + /* we support only two functions on device 0 */ + if (func > 1) +- return -EINVAL; ++ goto out; + + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); +- addr |= (off & 0x0FFF); ++ addr |= (off & 0x0FFC); + val = bcma_pcie_read_config(pc, addr); + } else { + addr = BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); +- addr |= (off & 0xfc); ++ addr |= (off & 0xFC); + val = pcicore_read32(pc, addr); + } + } else { +@@ -119,11 +119,9 @@ static int bcma_extpci_read_config(struc + goto out; + + if (mips_busprobe32(val, mmio)) { +- val = 0xffffffff; ++ val = 0xFFFFFFFF; + goto unmap; + } +- +- val = readl(mmio); + } + val >>= (8 * (off & 3)); + +@@ -151,7 +149,7 @@ static int bcma_extpci_write_config(stru + const void *buf, int len) + { + int err = -EINVAL; +- u32 addr = 0, val = 0; ++ u32 addr, val; + void __iomem *mmio = 0; + u16 chipid = pc->core->bus->chipinfo.id; + +@@ -159,16 +157,22 @@ static int bcma_extpci_write_config(stru + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ goto out; ++ + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ +- if (off < PCI_CONFIG_SPACE_SIZE) { +- addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFC); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); +- addr |= (off & 0xfc); +- mmio = ioremap_nocache(addr, sizeof(val)); +- if (!mmio) +- goto out; ++ addr |= (off & 0xFC); ++ val = pcicore_read32(pc, addr); + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); +@@ -180,19 +184,17 @@ static int bcma_extpci_write_config(stru + goto out; + + if (mips_busprobe32(val, mmio)) { +- val = 0xffffffff; ++ val = 0xFFFFFFFF; + goto unmap; + } + } + + switch (len) { + case 1: +- val = readl(mmio); + val &= ~(0xFF << (8 * (off & 3))); + val |= *((const u8 *)buf) << (8 * (off & 3)); + break; + case 2: +- val = readl(mmio); + val &= ~(0xFFFF << (8 * (off & 3))); + val |= *((const u16 *)buf) << (8 * (off & 3)); + break; +@@ -200,13 +202,14 @@ static int bcma_extpci_write_config(stru + val = *((const u32 *)buf); + break; + } +- if (dev == 0 && !addr) { ++ if (dev == 0) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ +- addr = (func << 12); +- addr |= (off & 0x0FFF); +- bcma_pcie_write_config(pc, addr, val); ++ if (off >= PCI_CONFIG_SPACE_SIZE) ++ bcma_pcie_write_config(pc, addr, val); ++ else ++ pcicore_write32(pc, addr, val); + } else { + writel(val, mmio); + +@@ -276,7 +279,7 @@ static u8 bcma_find_pci_capability(struc + /* check for Header type 0 */ + bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, + sizeof(u8)); +- if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL) + return cap_ptr; + + /* check if the capability pointer field exists */ +@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct + /* Reset RC */ + usleep_range(3000, 5000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); +- usleep_range(1000, 2000); ++ msleep(50); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | + BCMA_CORE_PCI_CTL_RST_OE); + +@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct + + bcma_core_pci_enable_crs(pc); + ++ if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 || ++ bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) { ++ u16 val16; ++ bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, ++ &val16, sizeof(val16)); ++ val16 |= (2 << 5); /* Max payload size of 512 */ ++ val16 |= (2 << 12); /* MRRS 512 */ ++ bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, ++ &val16, sizeof(val16)); ++ } ++ + /* Enable PCI bridge BAR0 memory & master access */ + tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); +@@ -576,7 +590,7 @@ int bcma_core_pci_plat_dev_init(struct p + pr_info("PCI: Fixing up device %s\n", pci_name(dev)); + + /* Fix up interrupt lines */ +- dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ dev->irq = bcma_core_irq(pc_host->pdev->core); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + + return 0; +@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const + + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); +- return bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ return bcma_core_irq(pc_host->pdev->core); + } + EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -81,8 +81,8 @@ struct bcma_device *bcma_find_core(struc + } + EXPORT_SYMBOL_GPL(bcma_find_core); + +-static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, +- u8 unit) ++struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, ++ u8 unit) + { + struct bcma_device *core; + +@@ -149,6 +149,14 @@ static int bcma_register_cores(struct bc + dev_id++; + } + ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ if (bus->drv_cc.pflash.present) { ++ err = platform_device_register(&bcma_pflash_dev); ++ if (err) ++ bcma_err(bus, "Error registering parallel flash\n"); ++ } ++#endif ++ + #ifdef CONFIG_BCMA_SFLASH + if (bus->drv_cc.sflash.present) { + err = platform_device_register(&bcma_sflash_dev); +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -27,7 +27,7 @@ + #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ + #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ + #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +-#define BCMA_CC_FLASHT_NFLASH 0x00000200 /* NAND flash */ ++#define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */ + #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ + #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ + #define BCMA_PLLTYPE_NONE 0x00000000 +--- a/include/linux/bcma/bcma_driver_mips.h ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -28,6 +28,7 @@ + #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 + #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 + ++#define BCMA_MIPS_OOBSELINA74 0x004 + #define BCMA_MIPS_OOBSELOUTA30 0x100 + + struct bcma_device; +@@ -36,19 +37,23 @@ struct bcma_drv_mips { + struct bcma_device *core; + u8 setup_done:1; + u8 early_setup_done:1; +- unsigned int assigned_irqs; + }; + + #ifdef CONFIG_BCMA_DRIVER_MIPS + extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); + extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_irq(struct bcma_device *core); + #else + static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } + static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } ++ ++static inline unsigned int bcma_core_irq(struct bcma_device *core) ++{ ++ return 0; ++} + #endif + + extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + +-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); +- + #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -179,6 +179,8 @@ struct pci_dev; + #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ + #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ + ++#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 ++ + /* PCIE Root Capability Register bits (Host mode only) */ + #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + -- cgit v1.2.3