summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-14[lantiq] fix compile error in previous commitblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] Support booting the Speedport W502V using BRN-BOOT.blogic
While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[pjsip] drop obselete Config.in fileblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: extract eeprom for the PCIe wlan module on the RT-N56Ujuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: rt3883: enable PCI on the RT-N56U boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: rt3883: add PCI supportjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: rt3883: sync 2.6.39 configjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14ramips: use SoC specific irq.hjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fixes irq locking in ethernet driverblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] fixes gpio_export patchblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[pjsip] bump to 1.12, merge improved lantiq aud_dev driverblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[lantiq] add a simple sip clientblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30519 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14[ltq-dsl] add annex selection support to ltq_dsl packageblogic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boardsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ar71xx: add model detection for TL-WR842N/NDjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13[package] hostapd: correctly pass 64 char hex PSK to wpa_supplicanthcg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30504 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13[malta] update to 3.2florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13[ar7] fix titan gpio register sizeflorian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13block-mount: do not auto-mount anonymous mtdblock devices (fixes #10960, #10850)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13quilt: add a NO_RECONFIGURE override for compiling a package without ↵nbd
re-running Build/Configure git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30500 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ramips: rt3883: update package list in the default profilejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ramips: add preliminary support for the Asus RT-N56U boardjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ramips: raeth: enable MDIO code for RT3883juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13package/modules: enable ECHI/OHCI for RT3883juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13ramips: add preliminary support for the RT3662/RT3883 SoCsjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13[package] kexec-tools: update to 2.0.3 (fixes #9846)florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30493 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13[malta] add support for 3.2florian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12brcm47xx: activate config bug to show warningshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent ↵nbd
libgcc crap from leaking into every single binary git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ (fixes #9765)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12package/grub: fix stage2 link with recent binutilsnbd
We want the `_start's symbols to be at the very beginning of the `stage2' binary's `.text' section. However, nothing enforces this requirement. With recent binutils (ie. post 2.19.1), this results in a corrupt binary, as ld(1) puts another symbol (eg. `journal_init') at the beginning of the section. Fix this by providing a stripped down version of the default linker script where we enforces the position of `_start' in the `.text' section. Patch by Arnaud Lacombe (#10444) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30484 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12ramips: use GENERIC_{4,8}M image template for WR5123GNjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12ramips: rt305x: pass MTD partition map to the ALL0256N via cmdlinejuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12brcm47xx: refresh patcheshauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12brcm47xx: update usb driver for brcm47xx.hauke
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12tools/genext2fs: do not include the host getline.h, it breaks the tool in ↵nbd
subtle ways, and the source already has a getline replacement git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30479 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12glibc: remove all previous (ancient) versions, add 2.14 (partially based on ↵nbd
a patch and testing by WillieNL) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12broadcom-diag: fix WRT150N/WRT160N detection (patch from #10836)nbd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12ramips: add initial support for 3.2juhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12ramips: include 'linux/module.h' in the ramips_spi driverjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12ramips: rt288x: remove per-board physmap_flash_data instancesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12ramips: rt305x: remove per-board physmap_flash_data instancesjuhosg
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[cns3xxx]: enable another l2 cache errate on newer kernelskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[toolchain/binutils]: enable 2.22 for unsupported archs if BROKEN is enabledkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[toolchain/gcc]: upgrade vanilla gcc to 4.6.2kaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[toolchain/binutils]: use binutils 2.22 by defaultkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[toolchain/uClibc]: use uClibc 0.9.33 by defaultkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[tolchain/gcc]: use Linaro GCC 4.6 by defaultkaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12[toolchain/gcc]: update to latest Linaro releaseskaloz
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30466 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 07:54:45 +0000