summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-11-18firewall: optimize DNAT rules and skip invalid rules and redirects (#14485)jow
- instead of writing one (or more) ACCEPT rules in the filter table for each redirect install a global ctstate DNAT accept rule per zone - discard rules and redirects which have invalid options set instead of silently skipping the invalid values git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38849 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-18ralink: add support for ralink mt7620 nand eval boardblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-18ralink: improve mt7620n detectionblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-18ralink: add mt7620 nand driverblogic
This is a minor rework of the SDK driver. This driver needs a full rewrite. Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-18ralink: make all none 3x5x boards default to a vlan1/2 setupblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-18ralink: make usb work on the mt7530 eval kitblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17mac80211: ath10k: add board.bin file againhauke
This file is still needed with the new firmware. This fixes r38835. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17at91: fix typo in network filehauke
This closes #14474. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kernel: add vmxnet3 modulehauke
support VMware ethernet adapters Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38840 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17xfsprogs: move to submenu Filesystemhauke
move xfsprogs to the right submenu e2fsprogs, btrfs-progs and other stuff is there already Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38838 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kirkwood: add missing kernel config CONFIG_REGMAP=yhauke
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17mac80211: update ath10k firmwarehauke
Current version of ath10k in the recently updated wireless-testing package requires a new firmware. This patch fixes the issue. v2: * fix (hopefully) the mangled whitespaces * actually install the new firmware instead of the old Signed-off-by: Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kernel: backport get_cycles() fixhauke
get_cycles() is used in some places as one part of the seed for the kernel PRNG. This backports the following commit from mainline linux kernel: 9c9b415c50bc298ac61412dff856eae2f54889ee Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17mac80211: add blink api backporthauke
This patch was copied from a more recent backports versions. This fixes a build problem with kernel < 3.6. This closes #14475 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38833 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17ralink: add mt7620n dts filesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17ramips: fix wmr300 network detectionblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kernel: add fix to block2mtd driver for modified error loggingwigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38827 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-17kernel: add missing symbols for 3.12wigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38826 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-16ralink: add mt7620n supportblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38823 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-16procd: ubox: update to latest git headblogic
move log service from procd to ubox some debloating on procd the preinit part of procd is now also a seperate binary Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-16kernel: add missing symbols for 3.12wigyori
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38820 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-16sunxi: remove old kernel config after 3.12 upgrade (r38811)luka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-166rd: Clear correct IPv6 address bits in 6rdcalccyrus
The correct bits are now cleared in the IPv6 address as the shift value to the correct byte in the IPv6 address was wrong. Depending on the stack values this could result in a hanging 6rdcalc program due to an endless loop. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38818 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15[omap]: replace the TI patch with a smaller patchsetkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38816 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: add profile for the WR842N/ND v2juhosg
Patch to add the profile for the TP-LINK WR842N/ND v2 Small update, because of a change in the Makefile. Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4382/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38815 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: add user space support for the TL-WR842N/ND v2juhosg
Patch to add the user space support for the TL-WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4354/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38814 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: Add kernel support for the WR842N/ND v2juhosg
Patch to add kernel support for the TP-LINK WR842N/ND v2 Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4352/ [juhosg: refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-15ar71xx: wndr4300: set official mac addressesjuhosg
Get the factory assigned mac addresses stored in the caldata partition and asign them to lan and wan interfaces. Also put the correct mac addresses into the WiFi eeprom files to ensure that the ath9k driver will use the correct ones. Signed-off-by: Stefan Agner <stefan@agner.ch> Patchwork: http://patchwork.openwrt.org/patch/4350/ [juhosg: - move WiFi MAC address setup to the firmware hotplug file, - use the official MAC address for the 2.4GHz as well, - remove uci-defaults.sh modifications, - update commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38812 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14sunxi: rework targetwigyori
- update kernel to 3.12 - add patches for clocks, i2c, usb, sid, rtc - support common image for A10/A13/A20 - add support for a couple boards - most drivers are configured into the kernel as of now Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38811 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14kernel: backport an upstream fix to improve TCP performance for wifi driversnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14openssl: add support for RIPEMD/160nbd
RIPEMD is needed to update erlang and i'd like to enable RIPEMD160 support in openssh. Size compared: openssl without RIPEMD/160 support: 647K 29. Okt 20:00 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk openssl with RIPEMD/160 support: 652K 8. Nov 15:11 bin/ar71xx/packages/libopenssl_1.0.1e-2_ar71xx.ipk So the file size just grows ~5kb, which shouldn't be a problem. Signed-off-by: Peter Wagner <tripolar@gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14rt2x00: fix a crash in the recent update (#14467)nbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ar71xx: Unifi AP Pro sysupgrade patchnbd
The current implementation of mtd will not append the backup file created by sysupgrade to the correct partition, as mtd will append the data to first jffs2 partition it finds. As the kernel is also stored on a jffs2 partition (which resides before the overlay partition), the data will be appended to this partition. To fix this problem, a new option -s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0" is added to mtd. Signed-off-by: Peter Wagner <tripolar@gmx.at> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ramips: use dd bs=4096k instead of bs=4M to make it more portablenbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ar71xx: use the new padjffs2 padding on Ubiquiti UAP-PRO to make the boot ↵nbd
loader stop searching after the kernel partition Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14padjffs2: add a different kind of padding (using standard jffs2 elements) to ↵nbd
work around broken boot loaders for kernel partitions Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14base-files: add macaddr_canonicalize helper functionjuhosg
In commit r38690, the MAC address canonicalization has been converted to use 'tr' instead of 'printf'. This only works if with MAC addresses which uses the 'xx:xx:xx:xx:xx:xx' format. However on some boards, the MAC addresses are stored in different format in the mtd partition. Some vendors are using hyphens or dots as separators instead of colons. Also the leading zeroes may be missing from the individual octets or those are replaced with spaces. Add a new function which can be used to convert these into the 'xx:xx:xx:xx:xx:xx' format. Also update the 'mtd_get_mac_ascii' function to use the new helper. The helper function is based on this code: http://isquared.nl/blog/2010/08/11/Bash-function-to-canonicalize-MAC-addresses/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14ath9k: add a fix to improve reliability of high bitrates on AR93xx/AR95xxnbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14mac80211: merge a patch that enables DFS for ad-hoc modenbd
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14Config.in: drop TARGET_UBIFS_SQUASH_UIDS, it's used by default nowluka
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38800 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-14image: don't force ubifs journal sizeluka
Small journal size can lead to problems if nand flash is too big. By default ubifs will use ~12% of volume size or a maximum of 8MiB. Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38799 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13mac80211: update regdb.txthauke
This was copied from wireless-regdb.git commit a14052b85e5d70e37a31962a9c56c0cdbb9acafc The passive-scan/no-ibss flag of channels 36-48 in the world regd were removed like it was done in r32126. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38797 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13bcm53xx: this ARM SoC does not have a FPU, use soft float.hauke
model name : ARMv7 Processor rev 0 (v7l) Features : swp half thumb fastmult edsp tls Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38796 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13zram-swap: fix dependencieshauke
swapon/swapoff are no longer provided by swap-utils; they are provided by block-mount instead. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38795 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13brcm47xx: swap also early boot console if necessary.hauke
Some devices are using tty1 as the default console, also swap the early boot console in such case. This is needed for the WGT634U. Thank you Russell for reporting this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13kernel: b53: fix untagged shift for BCM5365hauke
The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for the untagged ports. Thank you Russell for reporting this and testing the patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38793 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13[mac80211]: upgrade linux-firmware git revision, bump package versionkaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38792 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13[mac80211]: add another symbol for TI chipsetskaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38791 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13procd: remove obselete script install referenceblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-11-13procd: fixup 2 wrong option typesblogic
Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38789 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-29 07:39:48 +0000