From 79312bc73a529d239ae64957876cc28c87f4b64f Mon Sep 17 00:00:00 2001 From: luka Date: Tue, 11 Feb 2014 02:07:41 +0000 Subject: [PATCH] mvebu: backport mainline patches from kernel 3.12 This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12. This work mainly covers: * Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c) between the PXA family,and the Armada family. * Further updates to the mvebu MBus. * Work and ground work for enabling MSI on the Armada family. * some phy / mdio bus initialization related work. * Device tree binding documentation update. Signed-off-by: Seif Mazareeb CC: Luka Perkov git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39565 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- ...-the-harcoded-BootROM-window-allocat.patch | 67 + ...Initialize-MBus-using-the-DT-binding.patch | 67 + ...e-preprocessor-on-Armada-370-XP-devi.patch | 132 ++ ...dd-MBus-to-Armada-370-XP-device-tree.patch | 167 ++ ...BootROM-to-Armada-370-XP-device-tree.patch | 123 ++ ...te-Armada-370-XP-DeviceBus-device-tr.patch | 357 +++++ ...te-Armada-370-XP-PCIe-device-tree-no.patch | 1370 +++++++++++++++++ ...it-DT-and-legacy-MBus-initialization.patch | 52 + ...-the-preprocessor-on-device-tree-fil.patch | 485 ++++++ ...-ARM-kirkwood-Introduce-MBus-DT-node.patch | 41 + .../0063-ARM-kirkwood-Introduce-MBUS_ID.patch | 25 + ...wood-Relocate-PCIe-device-tree-nodes.patch | 301 ++++ ...us-mvebu-mbus-Add-devicetree-binding.patch | 303 ++++ ...-Adapt-to-the-new-device-tree-layout.patch | 304 ++++ ...set-aliases-for-ethernet-controllers.patch | 90 ++ ...rrect-interrupt-cells-instead-of-int.patch | 127 ++ ...bu-use-dts-pre-processor-for-mv78230.patch | 21 + ...ctions-for-MSI-arch-specific-functio.patch | 291 ++++ ...ove-ARCH_SUPPORTS_MSI-kconfig-option.patch | 152 ++ ...ntroduce-new-MSI-chip-infrastructure.patch | 108 ++ ...073-of-pci-add-registry-of-MSI-chips.patch | 106 ++ ...da-370-xp-properly-request-resources.patch | 64 + ...-armada-370-xp-implement-MSI-support.patch | 270 ++++ ...d_bus-and-remove_bus-hooks-to-hw_pci.patch | 80 + ...IC-now-provides-MSI-controller-featu.patch | 28 + .../0078-PCI-mvebu-add-support-for-MSI.patch | 109 ++ ...CIe-controllers-to-the-MSI-controlle.patch | 60 + ...-binding-for-the-fixed-link-property.patch | 132 ++ ...diobus_scan-after-adding-a-fixed-PHY.patch | 42 + ...t-mvneta-add-support-for-fixed-links.patch | 90 ++ ...da-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch | 84 + ...mvebu-Use-the-main-timer-as-clock-so.patch | 33 + ...armada-370-xp-fix-IPI-race-condition.patch | 46 + ...armada-370-xp-fix-MSI-race-condition.patch | 44 + ...vebu-re-enable-PCIe-on-Armada-370-DB.patch | 60 + ...-mvebu-fix-gated-clock-documentation.patch | 43 + ...sheet-s-ECC-information-to-nand_chip.patch | 64 + ...ructures-for-Extended-Parameter-Page.patch | 85 + ...-to-get-the-supported-features-for-O.patch | 43 + ...info-from-the-parameter-page-for-ONF.patch | 31 + ...info-from-the-Extended-Parameter-Pag.patch | 131 ++ ...ory-leak-in-ONFI-extended-parameter-.patch | 51 + ...096-clk-mvebu-Add-Core-Divider-clock.patch | 273 ++++ ...dd-a-2-GHz-fixed-clock-Armada-370-XP.patch | 32 + ...e-core-divider-clock-to-Armada-370-X.patch | 33 + ...pport-for-NAND-controller-in-Armada-.patch | 34 + ...-NAND-controller-in-Armada-XP-GP-boa.patch | 36 + ...101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch | 60 + ...and-pxa3xx-Use-devm_ioremap_resource.patch | 82 + ...103-mtd-nand-pxa3xx-Use-devm_clk_get.patch | 87 ++ ...Use-clk_prepare_enable-and-clk_disab.patch | 45 + ...Check-for-clk_prepare_enable-return-.patch | 29 + ...Move-buffer-release-code-to-its-own-.patch | 66 + ...and-pxa3xx-Set-info-use_dma-properly.patch | 46 + ...-pxa3xx-Use-of_machine_is_compatible.patch | 29 + ...-Fix-MODULE_DEVICE_TABLE-declaration.patch | 30 + ...Add-address-support-for-READID-comma.patch | 31 + ...Add-support-for-Read-parameter-page-.patch | 37 + ...nand-remove-unnecessary-platform_set.patch | 28 + .../0113-mtd-nand-use-dev_get_platdata.patch | 80 + ...Introduce-marvell-armada370-nand-com.patch | 88 ++ ...Handle-ECC-and-DMA-enable-disable-pr.patch | 39 + ...Allow-to-set-clear-the-spare-enable-.patch | 49 + ...nand-pxa3xx-Support-command-buffer-3.patch | 59 + ...Use-length-override-in-ONFI-paramate.patch | 52 + ...and-pxa3xx-Add-a-local-loop-variable.patch | 37 + ...and-pxa3xx-Remove-hardcoded-mtd-name.patch | 45 + ...a3xx-Remove-unneeded-internal-cmdset.patch | 200 +++ ...Move-cached-registers-to-info-struct.patch | 127 ++ ...Make-dma-code-dependent-on-dma-capab.patch | 106 ++ ...Add-__maybe_unused-keyword-to-enable.patch | 33 + ...-Allow-devices-with-no-dma-resources.patch | 78 + ...a3xx-Remove-unneeded-ifdef-CONFIG_OF.patch | 39 + ...-nand-pxa3xx-Fix-registered-MTD-name.patch | 48 + 74 files changed, 8337 insertions(+) create mode 100644 target/linux/mvebu/patches-3.10/0053-ARM-mvebu-Remove-the-harcoded-BootROM-window-allocat.patch create mode 100644 target/linux/mvebu/patches-3.10/0054-ARM-mvebu-Initialize-MBus-using-the-DT-binding.patch create mode 100644 target/linux/mvebu/patches-3.10/0055-ARM-mvebu-Use-the-preprocessor-on-Armada-370-XP-devi.patch create mode 100644 target/linux/mvebu/patches-3.10/0056-ARM-mvebu-Add-MBus-to-Armada-370-XP-device-tree.patch create mode 100644 target/linux/mvebu/patches-3.10/0057-ARM-mvebu-Add-BootROM-to-Armada-370-XP-device-tree.patch create mode 100644 target/linux/mvebu/patches-3.10/0058-ARM-mvebu-Relocate-Armada-370-XP-DeviceBus-device-tr.patch create mode 100644 target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch create mode 100644 target/linux/mvebu/patches-3.10/0060-ARM-kirkwood-Split-DT-and-legacy-MBus-initialization.patch create mode 100644 target/linux/mvebu/patches-3.10/0061-ARM-kirkwood-Use-the-preprocessor-on-device-tree-fil.patch create mode 100644 target/linux/mvebu/patches-3.10/0062-ARM-kirkwood-Introduce-MBus-DT-node.patch create mode 100644 target/linux/mvebu/patches-3.10/0063-ARM-kirkwood-Introduce-MBUS_ID.patch create mode 100644 target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch create mode 100644 target/linux/mvebu/patches-3.10/0065-bus-mvebu-mbus-Add-devicetree-binding.patch create mode 100644 target/linux/mvebu/patches-3.10/0066-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch create mode 100644 target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-for-ethernet-controllers.patch create mode 100644 target/linux/mvebu/patches-3.10/0068-ARM-mvebu-use-correct-interrupt-cells-instead-of-int.patch create mode 100644 target/linux/mvebu/patches-3.10/0069-ARM-mvebu-use-dts-pre-processor-for-mv78230.patch create mode 100644 target/linux/mvebu/patches-3.10/0070-PCI-use-weak-functions-for-MSI-arch-specific-functio.patch create mode 100644 target/linux/mvebu/patches-3.10/0071-PCI-remove-ARCH_SUPPORTS_MSI-kconfig-option.patch create mode 100644 target/linux/mvebu/patches-3.10/0072-PCI-Introduce-new-MSI-chip-infrastructure.patch create mode 100644 target/linux/mvebu/patches-3.10/0073-of-pci-add-registry-of-MSI-chips.patch create mode 100644 target/linux/mvebu/patches-3.10/0074-irqchip-armada-370-xp-properly-request-resources.patch create mode 100644 target/linux/mvebu/patches-3.10/0075-irqchip-armada-370-xp-implement-MSI-support.patch create mode 100644 target/linux/mvebu/patches-3.10/0076-ARM-pci-add-add_bus-and-remove_bus-hooks-to-hw_pci.patch create mode 100644 target/linux/mvebu/patches-3.10/0077-ARM-mvebu-the-MPIC-now-provides-MSI-controller-featu.patch create mode 100644 target/linux/mvebu/patches-3.10/0078-PCI-mvebu-add-support-for-MSI.patch create mode 100644 target/linux/mvebu/patches-3.10/0079-ARM-mvebu-link-PCIe-controllers-to-the-MSI-controlle.patch create mode 100644 target/linux/mvebu/patches-3.10/0080-of-provide-a-binding-for-the-fixed-link-property.patch create mode 100644 target/linux/mvebu/patches-3.10/0081-net-phy-call-mdiobus_scan-after-adding-a-fixed-PHY.patch create mode 100644 target/linux/mvebu/patches-3.10/0082-net-mvneta-add-support-for-fixed-links.patch create mode 100644 target/linux/mvebu/patches-3.10/0083-clocksource-armada-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch create mode 100644 target/linux/mvebu/patches-3.10/0084-arm-clocksource-mvebu-Use-the-main-timer-as-clock-so.patch create mode 100644 target/linux/mvebu/patches-3.10/0085-irqchip-armada-370-xp-fix-IPI-race-condition.patch create mode 100644 target/linux/mvebu/patches-3.10/0086-irqchip-armada-370-xp-fix-MSI-race-condition.patch create mode 100644 target/linux/mvebu/patches-3.10/0088-ARM-mvebu-re-enable-PCIe-on-Armada-370-DB.patch create mode 100644 target/linux/mvebu/patches-3.10/0089-ARM-mvebu-fix-gated-clock-documentation.patch create mode 100644 target/linux/mvebu/patches-3.10/0090-mtd-add-datasheet-s-ECC-information-to-nand_chip.patch create mode 100644 target/linux/mvebu/patches-3.10/0091-mtd-add-data-structures-for-Extended-Parameter-Page.patch create mode 100644 target/linux/mvebu/patches-3.10/0092-mtd-add-a-helper-to-get-the-supported-features-for-O.patch create mode 100644 target/linux/mvebu/patches-3.10/0093-mtd-get-the-ECC-info-from-the-parameter-page-for-ONF.patch create mode 100644 target/linux/mvebu/patches-3.10/0094-mtd-get-the-ECC-info-from-the-Extended-Parameter-Pag.patch create mode 100644 target/linux/mvebu/patches-3.10/0095-mtd-nand-fix-memory-leak-in-ONFI-extended-parameter-.patch create mode 100644 target/linux/mvebu/patches-3.10/0096-clk-mvebu-Add-Core-Divider-clock.patch create mode 100644 target/linux/mvebu/patches-3.10/0097-ARM-mvebu-Add-a-2-GHz-fixed-clock-Armada-370-XP.patch create mode 100644 target/linux/mvebu/patches-3.10/0098-ARM-mvebu-Add-the-core-divider-clock-to-Armada-370-X.patch create mode 100644 target/linux/mvebu/patches-3.10/0099-ARM-mvebu-Add-support-for-NAND-controller-in-Armada-.patch create mode 100644 target/linux/mvebu/patches-3.10/0100-ARM-mvebu-Enable-NAND-controller-in-Armada-XP-GP-boa.patch create mode 100644 target/linux/mvebu/patches-3.10/0101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch create mode 100644 target/linux/mvebu/patches-3.10/0102-mtd-nand-pxa3xx-Use-devm_ioremap_resource.patch create mode 100644 target/linux/mvebu/patches-3.10/0103-mtd-nand-pxa3xx-Use-devm_clk_get.patch create mode 100644 target/linux/mvebu/patches-3.10/0104-mtd-nand-pxa3xx-Use-clk_prepare_enable-and-clk_disab.patch create mode 100644 target/linux/mvebu/patches-3.10/0105-mtd-nand-pxa3xx-Check-for-clk_prepare_enable-return-.patch create mode 100644 target/linux/mvebu/patches-3.10/0106-mtd-nand-pxa3xx-Move-buffer-release-code-to-its-own-.patch create mode 100644 target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-info-use_dma-properly.patch create mode 100644 target/linux/mvebu/patches-3.10/0108-mtd-nand-pxa3xx-Use-of_machine_is_compatible.patch create mode 100644 target/linux/mvebu/patches-3.10/0109-mtd-nand-pxa3xx-Fix-MODULE_DEVICE_TABLE-declaration.patch create mode 100644 target/linux/mvebu/patches-3.10/0110-mtd-nand-pxa3xx-Add-address-support-for-READID-comma.patch create mode 100644 target/linux/mvebu/patches-3.10/0111-mtd-nand-pxa3xx-Add-support-for-Read-parameter-page-.patch create mode 100644 target/linux/mvebu/patches-3.10/0112-mtd-nand-pxa3xx_nand-remove-unnecessary-platform_set.patch create mode 100644 target/linux/mvebu/patches-3.10/0113-mtd-nand-use-dev_get_platdata.patch create mode 100644 target/linux/mvebu/patches-3.10/0114-mtd-nand-pxa3xx-Introduce-marvell-armada370-nand-com.patch create mode 100644 target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch create mode 100644 target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch create mode 100644 target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Support-command-buffer-3.patch create mode 100644 target/linux/mvebu/patches-3.10/0118-mtd-nand-pxa3xx-Use-length-override-in-ONFI-paramate.patch create mode 100644 target/linux/mvebu/patches-3.10/0119-mtd-nand-pxa3xx-Add-a-local-loop-variable.patch create mode 100644 target/linux/mvebu/patches-3.10/0120-mtd-nand-pxa3xx-Remove-hardcoded-mtd-name.patch create mode 100644 target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch create mode 100644 target/linux/mvebu/patches-3.10/0122-mtd-nand-pxa3xx-Move-cached-registers-to-info-struct.patch create mode 100644 target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch create mode 100644 target/linux/mvebu/patches-3.10/0124-mtd-nand-pxa3xx-Add-__maybe_unused-keyword-to-enable.patch create mode 100644 target/linux/mvebu/patches-3.10/0125-mtd-nand-pxa3xx-Allow-devices-with-no-dma-resources.patch create mode 100644 target/linux/mvebu/patches-3.10/0126-mtd-nand-pxa3xx-Remove-unneeded-ifdef-CONFIG_OF.patch create mode 100644 target/linux/mvebu/patches-3.10/0127-mtd-nand-pxa3xx-Fix-registered-MTD-name.patch diff --git a/target/linux/mvebu/patches-3.10/0053-ARM-mvebu-Remove-the-harcoded-BootROM-window-allocat.patch b/target/linux/mvebu/patches-3.10/0053-ARM-mvebu-Remove-the-harcoded-BootROM-window-allocat.patch new file mode 100644 index 0000000000..393bfc32c6 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0053-ARM-mvebu-Remove-the-harcoded-BootROM-window-allocat.patch @@ -0,0 +1,67 @@ +From 23a9b291a7b9ba28b31da56e6ced7a8168baa3de Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 21 May 2013 11:01:33 -0300 +Subject: [PATCH 053/203] ARM: mvebu: Remove the harcoded BootROM window + allocation + +The address decoding window to access the BootROM should not be +allocated programatically, but instead declared in the device tree. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/mach-mvebu/platsmp.c | 25 ++++++++++++++++++++++++- + 1 file changed, 24 insertions(+), 1 deletion(-) + +--- a/arch/arm/mach-mvebu/platsmp.c ++++ b/arch/arm/mach-mvebu/platsmp.c +@@ -21,6 +21,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -29,6 +30,9 @@ + #include "pmsu.h" + #include "coherency.h" + ++#define AXP_BOOTROM_BASE 0xfff00000 ++#define AXP_BOOTROM_SIZE 0x100000 ++ + void __init set_secondary_cpus_clock(void) + { + int thiscpu; +@@ -115,10 +119,29 @@ static void __init armada_xp_smp_init_cp + + void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) + { ++ struct device_node *node; ++ struct resource res; ++ int err; ++ + set_secondary_cpus_clock(); + flush_cache_all(); + set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); +- mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M); ++ ++ /* ++ * In order to boot the secondary CPUs we need to ensure ++ * the bootROM is mapped at the correct address. ++ */ ++ node = of_find_compatible_node(NULL, NULL, "marvell,bootrom"); ++ if (!node) ++ panic("Cannot find 'marvell,bootrom' compatible node"); ++ ++ err = of_address_to_resource(node, 0, &res); ++ if (err < 0) ++ panic("Cannot get 'bootrom' node address"); ++ ++ if (res.start != AXP_BOOTROM_BASE || ++ resource_size(&res) != AXP_BOOTROM_SIZE) ++ panic("The address for the BootROM is incorrect"); + } + + struct smp_operations armada_xp_smp_ops __initdata = { diff --git a/target/linux/mvebu/patches-3.10/0054-ARM-mvebu-Initialize-MBus-using-the-DT-binding.patch b/target/linux/mvebu/patches-3.10/0054-ARM-mvebu-Initialize-MBus-using-the-DT-binding.patch new file mode 100644 index 0000000000..586ec319f2 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0054-ARM-mvebu-Initialize-MBus-using-the-DT-binding.patch @@ -0,0 +1,67 @@ +From 08fe0e166c06fd86d6c8eed145d6508c3e5efaac Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 21 May 2013 11:12:00 -0300 +Subject: [PATCH 054/203] ARM: mvebu: Initialize MBus using the DT binding + +Now that the mbus device tree binding has been introduced, we can +switch over to it. + +Also, and since the initialization of the mbus driver is quite +fundamental for the system to work properly, this patch adds a BUG() +in case mbus fails to initialize. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/mach-mvebu/armada-370-xp.c | 34 +--------------------------------- + 1 file changed, 1 insertion(+), 33 deletions(-) + +--- a/arch/arm/mach-mvebu/armada-370-xp.c ++++ b/arch/arm/mach-mvebu/armada-370-xp.c +@@ -35,44 +35,12 @@ static void __init armada_370_xp_map_io( + debug_ll_io_init(); + } + +-/* +- * This initialization will be replaced by a DT-based +- * initialization once the mvebu-mbus driver gains DT support. +- */ +- +-#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000 +-#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 +-#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180 +-#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 +- +-static void __init armada_370_xp_mbus_init(void) +-{ +- char *mbus_soc_name; +- struct device_node *dn; +- const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS); +- const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS); +- +- if (of_machine_is_compatible("marvell,armada370")) +- mbus_soc_name = "marvell,armada370-mbus"; +- else +- mbus_soc_name = "marvell,armadaxp-mbus"; +- +- dn = of_find_node_by_name(NULL, "internal-regs"); +- BUG_ON(!dn); +- +- mvebu_mbus_init(mbus_soc_name, +- of_translate_address(dn, &mbus_wins_offs), +- ARMADA_370_XP_MBUS_WINS_SIZE, +- of_translate_address(dn, &sdram_wins_offs), +- ARMADA_370_XP_SDRAM_WINS_SIZE); +-} +- + static void __init armada_370_xp_timer_and_clk_init(void) + { + mvebu_clocks_init(); + armada_370_xp_timer_init(); + coherency_init(); +- armada_370_xp_mbus_init(); ++ BUG_ON(mvebu_mbus_dt_init()); + #ifdef CONFIG_CACHE_L2X0 + l2x0_of_init(0, ~0UL); + #endif diff --git a/target/linux/mvebu/patches-3.10/0055-ARM-mvebu-Use-the-preprocessor-on-Armada-370-XP-devi.patch b/target/linux/mvebu/patches-3.10/0055-ARM-mvebu-Use-the-preprocessor-on-Armada-370-XP-devi.patch new file mode 100644 index 0000000000..7c132a2689 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0055-ARM-mvebu-Use-the-preprocessor-on-Armada-370-XP-devi.patch @@ -0,0 +1,132 @@ +From 09aa74a11d05763043b1925628f65a5ac0d42237 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 12 Jun 2013 15:42:00 -0300 +Subject: [PATCH 055/203] ARM: mvebu: Use the preprocessor on Armada 370/XP + device tree files + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/armada-370-db.dts | 2 +- + arch/arm/boot/dts/armada-370-mirabox.dts | 2 +- + arch/arm/boot/dts/armada-370-rd.dts | 2 +- + arch/arm/boot/dts/armada-370.dtsi | 2 +- + arch/arm/boot/dts/armada-xp-db.dts | 2 +- + arch/arm/boot/dts/armada-xp-gp.dts | 2 +- + arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +- + arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +- + arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +- + arch/arm/boot/dts/armada-xp.dtsi | 2 +- + 10 files changed, 10 insertions(+), 10 deletions(-) + +--- a/arch/arm/boot/dts/armada-370-db.dts ++++ b/arch/arm/boot/dts/armada-370-db.dts +@@ -14,7 +14,7 @@ + */ + + /dts-v1/; +-/include/ "armada-370.dtsi" ++#include "armada-370.dtsi" + + / { + model = "Marvell Armada 370 Evaluation Board"; +--- a/arch/arm/boot/dts/armada-370-mirabox.dts ++++ b/arch/arm/boot/dts/armada-370-mirabox.dts +@@ -9,7 +9,7 @@ + */ + + /dts-v1/; +-/include/ "armada-370.dtsi" ++#include "armada-370.dtsi" + + / { + model = "Globalscale Mirabox"; +--- a/arch/arm/boot/dts/armada-370-rd.dts ++++ b/arch/arm/boot/dts/armada-370-rd.dts +@@ -12,7 +12,7 @@ + */ + + /dts-v1/; +-/include/ "armada-370.dtsi" ++#include "armada-370.dtsi" + + / { + model = "Marvell Armada 370 Reference Design"; +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -15,7 +15,7 @@ + * common to all Armada SoCs. + */ + +-/include/ "armada-370-xp.dtsi" ++#include "armada-370-xp.dtsi" + /include/ "skeleton.dtsi" + + / { +--- a/arch/arm/boot/dts/armada-xp-db.dts ++++ b/arch/arm/boot/dts/armada-xp-db.dts +@@ -14,7 +14,7 @@ + */ + + /dts-v1/; +-/include/ "armada-xp-mv78460.dtsi" ++#include "armada-xp-mv78460.dtsi" + + / { + model = "Marvell Armada XP Evaluation Board"; +--- a/arch/arm/boot/dts/armada-xp-gp.dts ++++ b/arch/arm/boot/dts/armada-xp-gp.dts +@@ -14,7 +14,7 @@ + */ + + /dts-v1/; +-/include/ "armada-xp-mv78460.dtsi" ++#include "armada-xp-mv78460.dtsi" + + / { + model = "Marvell Armada XP Development Board DB-MV784MP-GP"; +--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi +@@ -13,7 +13,7 @@ + * common to all Armada XP SoCs. + */ + +-/include/ "armada-xp.dtsi" ++#include "armada-xp.dtsi" + + / { + model = "Marvell Armada XP MV78260 SoC"; +--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi +@@ -13,7 +13,7 @@ + * common to all Armada XP SoCs. + */ + +-/include/ "armada-xp.dtsi" ++#include "armada-xp.dtsi" + + / { + model = "Marvell Armada XP MV78460 SoC"; +--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts ++++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +@@ -11,7 +11,7 @@ + */ + + /dts-v1/; +-/include/ "armada-xp-mv78260.dtsi" ++#include "armada-xp-mv78260.dtsi" + + / { + model = "PlatHome OpenBlocks AX3-4 board"; +--- a/arch/arm/boot/dts/armada-xp.dtsi ++++ b/arch/arm/boot/dts/armada-xp.dtsi +@@ -16,7 +16,7 @@ + * common to all Armada SoCs. + */ + +-/include/ "armada-370-xp.dtsi" ++#include "armada-370-xp.dtsi" + + / { + model = "Marvell Armada XP family SoC"; diff --git a/target/linux/mvebu/patches-3.10/0056-ARM-mvebu-Add-MBus-to-Armada-370-XP-device-tree.patch b/target/linux/mvebu/patches-3.10/0056-ARM-mvebu-Add-MBus-to-Armada-370-XP-device-tree.patch new file mode 100644 index 0000000000..ef7b59d9f4 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0056-ARM-mvebu-Add-MBus-to-Armada-370-XP-device-tree.patch @@ -0,0 +1,167 @@ +From 8298866bfa7fe9c1e33055322c415f612c16a477 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 28 May 2013 08:56:04 -0300 +Subject: [PATCH 056/203] ARM: mvebu: Add MBus to Armada 370/XP device tree + +The Armada 370/XP SoC family has a completely configurable address +space handled by the MBus controller. + +This patch introduces the device tree layout of MBus, making the +'soc' node as mbus-compatible. +Since every peripheral/controller is a child of this 'soc' node, +this makes all of them sit behind the mbus, thus describing the +hardware accurately. + +A translation entry has been added for the internal-regs mapping. +This can't be done in the common armada-370-xp.dtsi because A370 +and AXP have different addressing width. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/armada-370-db.dts | 2 ++ + arch/arm/boot/dts/armada-370-mirabox.dts | 2 ++ + arch/arm/boot/dts/armada-370-rd.dts | 2 ++ + arch/arm/boot/dts/armada-370-xp.dtsi | 15 ++++++++++----- + arch/arm/boot/dts/armada-370.dtsi | 4 ++-- + arch/arm/boot/dts/armada-xp-db.dts | 4 +--- + arch/arm/boot/dts/armada-xp-gp.dts | 4 +--- + arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 4 +--- + arch/arm/boot/dts/armada-xp.dtsi | 2 ++ + 9 files changed, 23 insertions(+), 16 deletions(-) + +--- a/arch/arm/boot/dts/armada-370-db.dts ++++ b/arch/arm/boot/dts/armada-370-db.dts +@@ -30,6 +30,8 @@ + }; + + soc { ++ ranges = ; ++ + internal-regs { + serial@12000 { + clock-frequency = <200000000>; +--- a/arch/arm/boot/dts/armada-370-mirabox.dts ++++ b/arch/arm/boot/dts/armada-370-mirabox.dts +@@ -25,6 +25,8 @@ + }; + + soc { ++ ranges = ; ++ + internal-regs { + serial@12000 { + clock-frequency = <200000000>; +--- a/arch/arm/boot/dts/armada-370-rd.dts ++++ b/arch/arm/boot/dts/armada-370-rd.dts +@@ -28,6 +28,8 @@ + }; + + soc { ++ ranges = ; ++ + internal-regs { + serial@12000 { + clock-frequency = <200000000>; +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -18,6 +18,8 @@ + + /include/ "skeleton64.dtsi" + ++#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) ++ + / { + model = "Marvell Armada 370 and XP SoC"; + compatible = "marvell,armada-370-xp"; +@@ -29,18 +31,21 @@ + }; + + soc { +- #address-cells = <1>; ++ #address-cells = <2>; + #size-cells = <1>; +- compatible = "simple-bus"; ++ controller = <&mbusc>; + interrupt-parent = <&mpic>; +- ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ +- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; + + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; +- ranges; ++ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; ++ ++ mbusc: mbus-controller@20000 { ++ compatible = "marvell,mbus-controller"; ++ reg = <0x20000 0x100>, <0x20180 0x20>; ++ }; + + mpic: interrupt-controller@20000 { + compatible = "marvell,mpic"; +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -29,8 +29,8 @@ + }; + + soc { +- ranges = <0 0xd0000000 0x0100000 /* internal registers */ +- 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; ++ compatible = "marvell,armada370-mbus", "simple-bus"; ++ + internal-regs { + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; +--- a/arch/arm/boot/dts/armada-xp-db.dts ++++ b/arch/arm/boot/dts/armada-xp-db.dts +@@ -30,9 +30,7 @@ + }; + + soc { +- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ +- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ +- 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-xp-gp.dts ++++ b/arch/arm/boot/dts/armada-xp-gp.dts +@@ -39,9 +39,7 @@ + }; + + soc { +- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ +- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ +- 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts ++++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +@@ -27,9 +27,7 @@ + }; + + soc { +- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ +- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ +- 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-xp.dtsi ++++ b/arch/arm/boot/dts/armada-xp.dtsi +@@ -23,6 +23,8 @@ + compatible = "marvell,armadaxp", "marvell,armada-370-xp"; + + soc { ++ compatible = "marvell,armadaxp-mbus", "simple-bus"; ++ + internal-regs { + L2: l2-cache { + compatible = "marvell,aurora-system-cache"; diff --git a/target/linux/mvebu/patches-3.10/0057-ARM-mvebu-Add-BootROM-to-Armada-370-XP-device-tree.patch b/target/linux/mvebu/patches-3.10/0057-ARM-mvebu-Add-BootROM-to-Armada-370-XP-device-tree.patch new file mode 100644 index 0000000000..c1509663b3 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0057-ARM-mvebu-Add-BootROM-to-Armada-370-XP-device-tree.patch @@ -0,0 +1,123 @@ +From 1028055490cf9d6e146f57d920e8cfff4eda37e2 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Fri, 14 Jun 2013 10:34:45 -0300 +Subject: [PATCH 057/203] ARM: mvebu: Add BootROM to Armada 370/XP device tree + +In order to access the SoC BootROM, we need to declare a mapping +(through a ranges property). The mbus driver will use this property +to allocate a suitable address decoding window. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/armada-370-db.dts | 3 ++- + arch/arm/boot/dts/armada-370-mirabox.dts | 3 ++- + arch/arm/boot/dts/armada-370-rd.dts | 3 ++- + arch/arm/boot/dts/armada-370.dtsi | 5 +++++ + arch/arm/boot/dts/armada-xp-db.dts | 3 ++- + arch/arm/boot/dts/armada-xp-gp.dts | 3 ++- + arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 3 ++- + arch/arm/boot/dts/armada-xp.dtsi | 5 +++++ + 8 files changed, 22 insertions(+), 6 deletions(-) + +--- a/arch/arm/boot/dts/armada-370-db.dts ++++ b/arch/arm/boot/dts/armada-370-db.dts +@@ -30,7 +30,8 @@ + }; + + soc { +- ranges = ; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-370-mirabox.dts ++++ b/arch/arm/boot/dts/armada-370-mirabox.dts +@@ -25,7 +25,8 @@ + }; + + soc { +- ranges = ; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-370-rd.dts ++++ b/arch/arm/boot/dts/armada-370-rd.dts +@@ -28,7 +28,8 @@ + }; + + soc { +- ranges = ; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -31,6 +31,11 @@ + soc { + compatible = "marvell,armada370-mbus", "simple-bus"; + ++ bootrom { ++ compatible = "marvell,bootrom"; ++ reg = ; ++ }; ++ + internal-regs { + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; +--- a/arch/arm/boot/dts/armada-xp-db.dts ++++ b/arch/arm/boot/dts/armada-xp-db.dts +@@ -30,7 +30,8 @@ + }; + + soc { +- ranges = ; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-xp-gp.dts ++++ b/arch/arm/boot/dts/armada-xp-gp.dts +@@ -39,7 +39,8 @@ + }; + + soc { +- ranges = ; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts ++++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +@@ -27,7 +27,8 @@ + }; + + soc { +- ranges = ; ++ ranges = ; + + internal-regs { + serial@12000 { +--- a/arch/arm/boot/dts/armada-xp.dtsi ++++ b/arch/arm/boot/dts/armada-xp.dtsi +@@ -25,6 +25,11 @@ + soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + ++ bootrom { ++ compatible = "marvell,bootrom"; ++ reg = ; ++ }; ++ + internal-regs { + L2: l2-cache { + compatible = "marvell,aurora-system-cache"; diff --git a/target/linux/mvebu/patches-3.10/0058-ARM-mvebu-Relocate-Armada-370-XP-DeviceBus-device-tr.patch b/target/linux/mvebu/patches-3.10/0058-ARM-mvebu-Relocate-Armada-370-XP-DeviceBus-device-tr.patch new file mode 100644 index 0000000000..4d7bb5fb56 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0058-ARM-mvebu-Relocate-Armada-370-XP-DeviceBus-device-tr.patch @@ -0,0 +1,357 @@ +From bcb0e54d62804f1f986ad478a11235dadb1b61bb Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Fri, 14 Jun 2013 10:44:57 -0300 +Subject: [PATCH 058/203] ARM: mvebu: Relocate Armada 370/XP DeviceBus device + tree nodes + +Now that mbus has been added to the device tree, it's possible to +move the DeviceBus out of internal registers, placing it directly +below the mbus. This is a more accurate representation of the hardware. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/armada-370-xp.dtsi | 94 +++++++++++++----------- + arch/arm/boot/dts/armada-xp-db.dts | 59 +++++++-------- + arch/arm/boot/dts/armada-xp-gp.dts | 60 +++++++-------- + arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 60 +++++++-------- + 4 files changed, 140 insertions(+), 133 deletions(-) + +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -36,6 +36,56 @@ + controller = <&mbusc>; + interrupt-parent = <&mpic>; + ++ devbus-bootcs { ++ compatible = "marvell,mvebu-devbus"; ++ reg = ; ++ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&coreclk 0>; ++ status = "disabled"; ++ }; ++ ++ devbus-cs0 { ++ compatible = "marvell,mvebu-devbus"; ++ reg = ; ++ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&coreclk 0>; ++ status = "disabled"; ++ }; ++ ++ devbus-cs1 { ++ compatible = "marvell,mvebu-devbus"; ++ reg = ; ++ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&coreclk 0>; ++ status = "disabled"; ++ }; ++ ++ devbus-cs2 { ++ compatible = "marvell,mvebu-devbus"; ++ reg = ; ++ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&coreclk 0>; ++ status = "disabled"; ++ }; ++ ++ devbus-cs3 { ++ compatible = "marvell,mvebu-devbus"; ++ reg = ; ++ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&coreclk 0>; ++ status = "disabled"; ++ }; ++ + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; +@@ -191,50 +241,6 @@ + status = "disabled"; + }; + +- devbus-bootcs@10400 { +- compatible = "marvell,mvebu-devbus"; +- reg = <0x10400 0x8>; +- #address-cells = <1>; +- #size-cells = <1>; +- clocks = <&coreclk 0>; +- status = "disabled"; +- }; +- +- devbus-cs0@10408 { +- compatible = "marvell,mvebu-devbus"; +- reg = <0x10408 0x8>; +- #address-cells = <1>; +- #size-cells = <1>; +- clocks = <&coreclk 0>; +- status = "disabled"; +- }; +- +- devbus-cs1@10410 { +- compatible = "marvell,mvebu-devbus"; +- reg = <0x10410 0x8>; +- #address-cells = <1>; +- #size-cells = <1>; +- clocks = <&coreclk 0>; +- status = "disabled"; +- }; +- +- devbus-cs2@10418 { +- compatible = "marvell,mvebu-devbus"; +- reg = <0x10418 0x8>; +- #address-cells = <1>; +- #size-cells = <1>; +- clocks = <&coreclk 0>; +- status = "disabled"; +- }; +- +- devbus-cs3@10420 { +- compatible = "marvell,mvebu-devbus"; +- reg = <0x10420 0x8>; +- #address-cells = <1>; +- #size-cells = <1>; +- clocks = <&coreclk 0>; +- status = "disabled"; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-db.dts ++++ b/arch/arm/boot/dts/armada-xp-db.dts +@@ -31,7 +31,36 @@ + + soc { + ranges = ; ++ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 ++ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; ++ ++ devbus-bootcs { ++ status = "okay"; ++ ++ /* Device Bus parameters are required */ ++ ++ /* Read parameters */ ++ devbus,bus-width = <8>; ++ devbus,turn-off-ps = <60000>; ++ devbus,badr-skew-ps = <0>; ++ devbus,acc-first-ps = <124000>; ++ devbus,acc-next-ps = <248000>; ++ devbus,rd-setup-ps = <0>; ++ devbus,rd-hold-ps = <0>; ++ ++ /* Write parameters */ ++ devbus,sync-enable = <0>; ++ devbus,wr-high-ps = <60000>; ++ devbus,wr-low-ps = <60000>; ++ devbus,ale-wr-ps = <60000>; ++ ++ /* NOR 16 MiB */ ++ nor@0 { ++ compatible = "cfi-flash"; ++ reg = <0 0x1000000>; ++ bank-width = <2>; ++ }; ++ }; + + internal-regs { + serial@12000 { +@@ -160,34 +189,6 @@ + }; + }; + +- devbus-bootcs@10400 { +- status = "okay"; +- ranges = <0 0xf0000000 0x1000000>; +- +- /* Device Bus parameters are required */ +- +- /* Read parameters */ +- devbus,bus-width = <8>; +- devbus,turn-off-ps = <60000>; +- devbus,badr-skew-ps = <0>; +- devbus,acc-first-ps = <124000>; +- devbus,acc-next-ps = <248000>; +- devbus,rd-setup-ps = <0>; +- devbus,rd-hold-ps = <0>; +- +- /* Write parameters */ +- devbus,sync-enable = <0>; +- devbus,wr-high-ps = <60000>; +- devbus,wr-low-ps = <60000>; +- devbus,ale-wr-ps = <60000>; +- +- /* NOR 16 MiB */ +- nor@0 { +- compatible = "cfi-flash"; +- reg = <0 0x1000000>; +- bank-width = <2>; +- }; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-gp.dts ++++ b/arch/arm/boot/dts/armada-xp-gp.dts +@@ -40,7 +40,36 @@ + + soc { + ranges = ; ++ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 ++ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; ++ ++ devbus-bootcs { ++ status = "okay"; ++ ++ /* Device Bus parameters are required */ ++ ++ /* Read parameters */ ++ devbus,bus-width = <8>; ++ devbus,turn-off-ps = <60000>; ++ devbus,badr-skew-ps = <0>; ++ devbus,acc-first-ps = <124000>; ++ devbus,acc-next-ps = <248000>; ++ devbus,rd-setup-ps = <0>; ++ devbus,rd-hold-ps = <0>; ++ ++ /* Write parameters */ ++ devbus,sync-enable = <0>; ++ devbus,wr-high-ps = <60000>; ++ devbus,wr-low-ps = <60000>; ++ devbus,ale-wr-ps = <60000>; ++ ++ /* NOR 16 MiB */ ++ nor@0 { ++ compatible = "cfi-flash"; ++ reg = <0 0x1000000>; ++ bank-width = <2>; ++ }; ++ }; + + internal-regs { + serial@12000 { +@@ -126,35 +155,6 @@ + }; + }; + +- devbus-bootcs@10400 { +- status = "okay"; +- ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ +- +- /* Device Bus parameters are required */ +- +- /* Read parameters */ +- devbus,bus-width = <8>; +- devbus,turn-off-ps = <60000>; +- devbus,badr-skew-ps = <0>; +- devbus,acc-first-ps = <124000>; +- devbus,acc-next-ps = <248000>; +- devbus,rd-setup-ps = <0>; +- devbus,rd-hold-ps = <0>; +- +- /* Write parameters */ +- devbus,sync-enable = <0>; +- devbus,wr-high-ps = <60000>; +- devbus,wr-low-ps = <60000>; +- devbus,ale-wr-ps = <60000>; +- +- /* NOR 16 MiB */ +- nor@0 { +- compatible = "cfi-flash"; +- reg = <0 0x1000000>; +- bank-width = <2>; +- }; +- }; +- + pcie-controller { + status = "okay"; + +--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts ++++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +@@ -28,7 +28,36 @@ + + soc { + ranges = ; ++ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 ++ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; ++ ++ devbus-bootcs { ++ status = "okay"; ++ ++ /* Device Bus parameters are required */ ++ ++ /* Read parameters */ ++ devbus,bus-width = <8>; ++ devbus,turn-off-ps = <60000>; ++ devbus,badr-skew-ps = <0>; ++ devbus,acc-first-ps = <124000>; ++ devbus,acc-next-ps = <248000>; ++ devbus,rd-setup-ps = <0>; ++ devbus,rd-hold-ps = <0>; ++ ++ /* Write parameters */ ++ devbus,sync-enable = <0>; ++ devbus,wr-high-ps = <60000>; ++ devbus,wr-low-ps = <60000>; ++ devbus,ale-wr-ps = <60000>; ++ ++ /* NOR 128 MiB */ ++ nor@0 { ++ compatible = "cfi-flash"; ++ reg = <0 0x8000000>; ++ bank-width = <2>; ++ }; ++ }; + + internal-regs { + serial@12000 { +@@ -144,35 +173,6 @@ + status = "okay"; + }; + +- devbus-bootcs@10400 { +- status = "okay"; +- ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ +- +- /* Device Bus parameters are required */ +- +- /* Read parameters */ +- devbus,bus-width = <8>; +- devbus,turn-off-ps = <60000>; +- devbus,badr-skew-ps = <0>; +- devbus,acc-first-ps = <124000>; +- devbus,acc-next-ps = <248000>; +- devbus,rd-setup-ps = <0>; +- devbus,rd-hold-ps = <0>; +- +- /* Write parameters */ +- devbus,sync-enable = <0>; +- devbus,wr-high-ps = <60000>; +- devbus,wr-low-ps = <60000>; +- devbus,ale-wr-ps = <60000>; +- +- /* NOR 128 MiB */ +- nor@0 { +- compatible = "cfi-flash"; +- reg = <0 0x8000000>; +- bank-width = <2>; +- }; +- }; +- + pcie-controller { + status = "okay"; + /* Internal mini-PCIe connector */ diff --git a/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch b/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch new file mode 100644 index 0000000000..a7ce3ed7ff --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch @@ -0,0 +1,1370 @@ +From db5029d82c4f0685438ea38eb3fbaadac46a22ba Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 12 Jun 2013 18:02:19 -0300 +Subject: [PATCH 059/203] ARM: mvebu: Relocate Armada 370/XP PCIe device tree + nodes + +Now that mbus has been added to the device tree, it's possible to +move the PCIe nodes out of internal registers, placing it directly +below the mbus. This is a more accurate representation of the +hardware. + +Moving the PCIe nodes, we now need to introduce an extra cell to +encode the window target ID and attribute. Since this depends on +the PCIe port, we split the ranges translation entries, to correspond +to each MBus window. + +Signed-off-by: Thomas Petazzoni +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/armada-370-mirabox.dts | 32 +- + arch/arm/boot/dts/armada-370-xp.dtsi | 2 + + arch/arm/boot/dts/armada-370.dtsi | 101 +++--- + arch/arm/boot/dts/armada-xp-db.dts | 67 ++-- + arch/arm/boot/dts/armada-xp-gp.dts | 42 +-- + arch/arm/boot/dts/armada-xp-mv78230.dtsi | 222 ++++++------ + arch/arm/boot/dts/armada-xp-mv78260.dtsi | 261 ++++++++------- + arch/arm/boot/dts/armada-xp-mv78460.dtsi | 409 ++++++++++++----------- + arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 18 +- + 9 files changed, 612 insertions(+), 542 deletions(-) + +--- a/arch/arm/boot/dts/armada-370-mirabox.dts ++++ b/arch/arm/boot/dts/armada-370-mirabox.dts +@@ -28,6 +28,22 @@ + ranges = ; + ++ pcie-controller { ++ status = "okay"; ++ ++ /* Internal mini-PCIe connector */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ ++ /* Connected on the PCB to a USB 3.0 XHCI controller */ ++ pcie@2,0 { ++ /* Port 1, Lane 0 */ ++ status = "okay"; ++ }; ++ }; ++ + internal-regs { + serial@12000 { + clock-frequency = <200000000>; +@@ -123,22 +139,6 @@ + reg = <0x25>; + }; + }; +- +- pcie-controller { +- status = "okay"; +- +- /* Internal mini-PCIe connector */ +- pcie@1,0 { +- /* Port 0, Lane 0 */ +- status = "okay"; +- }; +- +- /* Connected on the PCB to a USB 3.0 XHCI controller */ +- pcie@2,0 { +- /* Port 1, Lane 0 */ +- status = "okay"; +- }; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -35,6 +35,8 @@ + #size-cells = <1>; + controller = <&mbusc>; + interrupt-parent = <&mpic>; ++ pcie-mem-aperture = <0xe0000000 0x8000000>; ++ pcie-io-aperture = <0xe8000000 0x100000>; + + devbus-bootcs { + compatible = "marvell,mvebu-devbus"; +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -36,6 +36,59 @@ + reg = ; + }; + ++ pcie-controller { ++ compatible = "marvell,armada-370-pcie"; ++ status = "disabled"; ++ device_type = "pci"; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ bus-range = <0x00 0xff>; ++ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 ++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 ++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ ++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ ++ 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ ++ 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; ++ ++ pcie@1,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; ++ reg = <0x0800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 ++ 0x81000000 0 0 0x81000000 0x1 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 58>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 5>; ++ status = "disabled"; ++ }; ++ ++ pcie@2,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; ++ reg = <0x1000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 ++ 0x81000000 0 0 0x81000000 0x2 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 62>; ++ marvell,pcie-port = <1>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 9>; ++ status = "disabled"; ++ }; ++ }; ++ + internal-regs { + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; +@@ -174,54 +227,6 @@ + 0x18304 0x4>; + status = "okay"; + }; +- +- pcie-controller { +- compatible = "marvell,armada-370-pcie"; +- status = "disabled"; +- device_type = "pci"; +- +- #address-cells = <3>; +- #size-cells = <2>; +- +- bus-range = <0x00 0xff>; +- +- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ +- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ +- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ +- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ +- +- pcie@1,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; +- reg = <0x0800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 58>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 5>; +- status = "disabled"; +- }; +- +- pcie@2,0 { +- device_type = "pci"; +- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; +- reg = <0x1000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 62>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 9>; +- status = "disabled"; +- }; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-db.dts ++++ b/arch/arm/boot/dts/armada-xp-db.dts +@@ -62,6 +62,39 @@ + }; + }; + ++ pcie-controller { ++ status = "okay"; ++ ++ /* ++ * All 6 slots are physically present as ++ * standard PCIe slots on the board. ++ */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ pcie@2,0 { ++ /* Port 0, Lane 1 */ ++ status = "okay"; ++ }; ++ pcie@3,0 { ++ /* Port 0, Lane 2 */ ++ status = "okay"; ++ }; ++ pcie@4,0 { ++ /* Port 0, Lane 3 */ ++ status = "okay"; ++ }; ++ pcie@9,0 { ++ /* Port 2, Lane 0 */ ++ status = "okay"; ++ }; ++ pcie@10,0 { ++ /* Port 3, Lane 0 */ ++ status = "okay"; ++ }; ++ }; ++ + internal-regs { + serial@12000 { + clock-frequency = <250000000>; +@@ -155,40 +188,6 @@ + spi-max-frequency = <20000000>; + }; + }; +- +- pcie-controller { +- status = "okay"; +- +- /* +- * All 6 slots are physically present as +- * standard PCIe slots on the board. +- */ +- pcie@1,0 { +- /* Port 0, Lane 0 */ +- status = "okay"; +- }; +- pcie@2,0 { +- /* Port 0, Lane 1 */ +- status = "okay"; +- }; +- pcie@3,0 { +- /* Port 0, Lane 2 */ +- status = "okay"; +- }; +- pcie@4,0 { +- /* Port 0, Lane 3 */ +- status = "okay"; +- }; +- pcie@9,0 { +- /* Port 2, Lane 0 */ +- status = "okay"; +- }; +- pcie@10,0 { +- /* Port 3, Lane 0 */ +- status = "okay"; +- }; +- }; +- + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-gp.dts ++++ b/arch/arm/boot/dts/armada-xp-gp.dts +@@ -71,6 +71,27 @@ + }; + }; + ++ pcie-controller { ++ status = "okay"; ++ ++ /* ++ * The 3 slots are physically present as ++ * standard PCIe slots on the board. ++ */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ pcie@9,0 { ++ /* Port 2, Lane 0 */ ++ status = "okay"; ++ }; ++ pcie@10,0 { ++ /* Port 3, Lane 0 */ ++ status = "okay"; ++ }; ++ }; ++ + internal-regs { + serial@12000 { + clock-frequency = <250000000>; +@@ -154,27 +175,6 @@ + spi-max-frequency = <108000000>; + }; + }; +- +- pcie-controller { +- status = "okay"; +- +- /* +- * The 3 slots are physically present as +- * standard PCIe slots on the board. +- */ +- pcie@1,0 { +- /* Port 0, Lane 0 */ +- status = "okay"; +- }; +- pcie@9,0 { +- /* Port 2, Lane 0 */ +- status = "okay"; +- }; +- pcie@10,0 { +- /* Port 3, Lane 0 */ +- status = "okay"; +- }; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi +@@ -44,6 +44,124 @@ + }; + + soc { ++ /* ++ * MV78230 has 2 PCIe units Gen2.0: One unit can be ++ * configured as x4 or quad x1 lanes. One unit is ++ * x4/x1. ++ */ ++ pcie-controller { ++ compatible = "marvell,armada-xp-pcie"; ++ status = "disabled"; ++ device_type = "pci"; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ bus-range = <0x00 0xff>; ++ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ ++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ ++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ ++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ ++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ ++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ ++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ ++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ ++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ ++ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ ++ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ ++ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ ++ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ ++ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ ++ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; ++ ++ pcie@1,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; ++ reg = <0x0800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 ++ 0x81000000 0 0 0x81000000 0x1 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 58>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 5>; ++ status = "disabled"; ++ }; ++ ++ pcie@2,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; ++ reg = <0x1000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 ++ 0x81000000 0 0 0x81000000 0x2 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 59>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <1>; ++ clocks = <&gateclk 6>; ++ status = "disabled"; ++ }; ++ ++ pcie@3,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; ++ reg = <0x1800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 ++ 0x81000000 0 0 0x81000000 0x3 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 60>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <2>; ++ clocks = <&gateclk 7>; ++ status = "disabled"; ++ }; ++ ++ pcie@4,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; ++ reg = <0x2000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 ++ 0x81000000 0 0 0x81000000 0x4 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 61>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <3>; ++ clocks = <&gateclk 8>; ++ status = "disabled"; ++ }; ++ ++ pcie@9,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; ++ reg = <0x4800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 ++ 0x81000000 0 0 0x81000000 0x9 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 99>; ++ marvell,pcie-port = <2>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 26>; ++ status = "disabled"; ++ }; ++ }; ++ + internal-regs { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; +@@ -79,108 +197,6 @@ + }; + + /* +- * MV78230 has 2 PCIe units Gen2.0: One unit can be +- * configured as x4 or quad x1 lanes. One unit is +- * x1 only. +- */ +- pcie-controller { +- compatible = "marvell,armada-xp-pcie"; +- status = "disabled"; +- device_type = "pci"; +- +-#address-cells = <3>; +-#size-cells = <2>; +- +- bus-range = <0x00 0xff>; +- +- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ +- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ +- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ +- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ +- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ +- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ +- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ +- +- pcie@1,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; +- reg = <0x0800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 58>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 5>; +- status = "disabled"; +- }; +- +- pcie@2,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; +- reg = <0x1000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 59>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <1>; +- clocks = <&gateclk 6>; +- status = "disabled"; +- }; +- +- pcie@3,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; +- reg = <0x1800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 60>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <2>; +- clocks = <&gateclk 7>; +- status = "disabled"; +- }; +- +- pcie@4,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; +- reg = <0x2000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 61>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <3>; +- clocks = <&gateclk 8>; +- status = "disabled"; +- }; +- +- pcie@5,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; +- reg = <0x2800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 62>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 9>; +- status = "disabled"; +- }; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi +@@ -45,6 +45,145 @@ + }; + + soc { ++ /* ++ * MV78260 has 3 PCIe units Gen2.0: Two units can be ++ * configured as x4 or quad x1 lanes. One unit is ++ * x4/x1. ++ */ ++ pcie-controller { ++ compatible = "marvell,armada-xp-pcie"; ++ status = "disabled"; ++ device_type = "pci"; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ bus-range = <0x00 0xff>; ++ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ ++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ ++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ ++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ ++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ ++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ ++ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ ++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ ++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ ++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ ++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ ++ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ ++ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ ++ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ ++ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ ++ 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ ++ 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ ++ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ ++ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; ++ ++ pcie@1,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; ++ reg = <0x0800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 ++ 0x81000000 0 0 0x81000000 0x1 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 58>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 5>; ++ status = "disabled"; ++ }; ++ ++ pcie@2,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; ++ reg = <0x1000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 ++ 0x81000000 0 0 0x81000000 0x2 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 59>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <1>; ++ clocks = <&gateclk 6>; ++ status = "disabled"; ++ }; ++ ++ pcie@3,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; ++ reg = <0x1800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 ++ 0x81000000 0 0 0x81000000 0x3 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 60>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <2>; ++ clocks = <&gateclk 7>; ++ status = "disabled"; ++ }; ++ ++ pcie@4,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; ++ reg = <0x2000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 ++ 0x81000000 0 0 0x81000000 0x4 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 61>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <3>; ++ clocks = <&gateclk 8>; ++ status = "disabled"; ++ }; ++ ++ pcie@9,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; ++ reg = <0x4800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 ++ 0x81000000 0 0 0x81000000 0x9 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 99>; ++ marvell,pcie-port = <2>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 26>; ++ status = "disabled"; ++ }; ++ ++ pcie@10,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; ++ reg = <0x5000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 ++ 0x81000000 0 0 0x81000000 0xa 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 103>; ++ marvell,pcie-port = <3>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 27>; ++ status = "disabled"; ++ }; ++ }; ++ + internal-regs { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; +@@ -98,177 +237,6 @@ + status = "disabled"; + }; + +- /* +- * MV78260 has 3 PCIe units Gen2.0: Two units can be +- * configured as x4 or quad x1 lanes. One unit is +- * x4 only. +- */ +- pcie-controller { +- compatible = "marvell,armada-xp-pcie"; +- status = "disabled"; +- device_type = "pci"; +- +- #address-cells = <3>; +- #size-cells = <2>; +- +- bus-range = <0x00 0xff>; +- +- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ +- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ +- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ +- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ +- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ +- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ +- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ +- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ +- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ +- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ +- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ +- +- pcie@1,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; +- reg = <0x0800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 58>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 5>; +- status = "disabled"; +- }; +- +- pcie@2,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; +- reg = <0x1000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 59>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <1>; +- clocks = <&gateclk 6>; +- status = "disabled"; +- }; +- +- pcie@3,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; +- reg = <0x1800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 60>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <2>; +- clocks = <&gateclk 7>; +- status = "disabled"; +- }; +- +- pcie@4,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; +- reg = <0x2000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 61>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <3>; +- clocks = <&gateclk 8>; +- status = "disabled"; +- }; +- +- pcie@5,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; +- reg = <0x2800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 62>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 9>; +- status = "disabled"; +- }; +- +- pcie@6,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; +- reg = <0x3000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 63>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <1>; +- clocks = <&gateclk 10>; +- status = "disabled"; +- }; +- +- pcie@7,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; +- reg = <0x3800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 64>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <2>; +- clocks = <&gateclk 11>; +- status = "disabled"; +- }; +- +- pcie@8,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; +- reg = <0x4000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 65>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <3>; +- clocks = <&gateclk 12>; +- status = "disabled"; +- }; +- +- pcie@9,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; +- reg = <0x4800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 99>; +- marvell,pcie-port = <2>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 26>; +- status = "disabled"; +- }; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi +@@ -60,6 +60,227 @@ + }; + + soc { ++ /* ++ * MV78460 has 4 PCIe units Gen2.0: Two units can be ++ * configured as x4 or quad x1 lanes. Two units are ++ * x4/x1. ++ */ ++ pcie-controller { ++ compatible = "marvell,armada-xp-pcie"; ++ status = "disabled"; ++ device_type = "pci"; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ bus-range = <0x00 0xff>; ++ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ ++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ ++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ ++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ ++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ ++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ ++ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ ++ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ ++ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ ++ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ ++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ ++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ ++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ ++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ ++ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ ++ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ ++ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ ++ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ ++ ++ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ ++ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ ++ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ ++ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ ++ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ ++ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ ++ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ ++ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ ++ ++ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ ++ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ ++ ++ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ ++ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; ++ ++ pcie@1,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; ++ reg = <0x0800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 ++ 0x81000000 0 0 0x81000000 0x1 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 58>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 5>; ++ status = "disabled"; ++ }; ++ ++ pcie@2,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; ++ reg = <0x1000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 ++ 0x81000000 0 0 0x81000000 0x2 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 59>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <1>; ++ clocks = <&gateclk 6>; ++ status = "disabled"; ++ }; ++ ++ pcie@3,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; ++ reg = <0x1800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 ++ 0x81000000 0 0 0x81000000 0x3 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 60>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <2>; ++ clocks = <&gateclk 7>; ++ status = "disabled"; ++ }; ++ ++ pcie@4,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; ++ reg = <0x2000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 ++ 0x81000000 0 0 0x81000000 0x4 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 61>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <3>; ++ clocks = <&gateclk 8>; ++ status = "disabled"; ++ }; ++ ++ pcie@5,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; ++ reg = <0x2800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 ++ 0x81000000 0 0 0x81000000 0x5 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 62>; ++ marvell,pcie-port = <1>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 9>; ++ status = "disabled"; ++ }; ++ ++ pcie@6,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; ++ reg = <0x3000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 ++ 0x81000000 0 0 0x81000000 0x6 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 63>; ++ marvell,pcie-port = <1>; ++ marvell,pcie-lane = <1>; ++ clocks = <&gateclk 10>; ++ status = "disabled"; ++ }; ++ ++ pcie@7,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; ++ reg = <0x3800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 ++ 0x81000000 0 0 0x81000000 0x7 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 64>; ++ marvell,pcie-port = <1>; ++ marvell,pcie-lane = <2>; ++ clocks = <&gateclk 11>; ++ status = "disabled"; ++ }; ++ ++ pcie@8,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; ++ reg = <0x4000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 ++ 0x81000000 0 0 0x81000000 0x8 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 65>; ++ marvell,pcie-port = <1>; ++ marvell,pcie-lane = <3>; ++ clocks = <&gateclk 12>; ++ status = "disabled"; ++ }; ++ ++ pcie@9,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; ++ reg = <0x4800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 ++ 0x81000000 0 0 0x81000000 0x9 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 99>; ++ marvell,pcie-port = <2>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 26>; ++ status = "disabled"; ++ }; ++ ++ pcie@10,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; ++ reg = <0x5000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 ++ 0x81000000 0 0 0x81000000 0xa 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &mpic 103>; ++ marvell,pcie-port = <3>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gateclk 27>; ++ status = "disabled"; ++ }; ++ }; ++ + internal-regs { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; +@@ -112,194 +333,6 @@ + clocks = <&gateclk 1>; + status = "disabled"; + }; +- +- /* +- * MV78460 has 4 PCIe units Gen2.0: Two units can be +- * configured as x4 or quad x1 lanes. Two units are +- * x4/x1. +- */ +- pcie-controller { +- compatible = "marvell,armada-xp-pcie"; +- status = "disabled"; +- device_type = "pci"; +- +- #address-cells = <3>; +- #size-cells = <2>; +- +- bus-range = <0x00 0xff>; +- +- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ +- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ +- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ +- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ +- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ +- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ +- 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ +- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ +- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ +- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ +- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ +- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ +- +- pcie@1,0 { +- device_type = "pci"; +- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; +- reg = <0x0800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 58>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 5>; +- status = "disabled"; +- }; +- +- pcie@2,0 { +- device_type = "pci"; +- assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; +- reg = <0x1000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 59>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <1>; +- clocks = <&gateclk 6>; +- status = "disabled"; +- }; +- +- pcie@3,0 { +- device_type = "pci"; +- assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; +- reg = <0x1800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 60>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <2>; +- clocks = <&gateclk 7>; +- status = "disabled"; +- }; +- +- pcie@4,0 { +- device_type = "pci"; +- assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; +- reg = <0x2000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 61>; +- marvell,pcie-port = <0>; +- marvell,pcie-lane = <3>; +- clocks = <&gateclk 8>; +- status = "disabled"; +- }; +- +- pcie@5,0 { +- device_type = "pci"; +- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; +- reg = <0x2800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 62>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 9>; +- status = "disabled"; +- }; +- +- pcie@6,0 { +- device_type = "pci"; +- assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; +- reg = <0x3000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 63>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <1>; +- clocks = <&gateclk 10>; +- status = "disabled"; +- }; +- +- pcie@7,0 { +- device_type = "pci"; +- assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; +- reg = <0x3800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 64>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <2>; +- clocks = <&gateclk 11>; +- status = "disabled"; +- }; +- +- pcie@8,0 { +- device_type = "pci"; +- assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; +- reg = <0x4000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 65>; +- marvell,pcie-port = <1>; +- marvell,pcie-lane = <3>; +- clocks = <&gateclk 12>; +- status = "disabled"; +- }; +- pcie@9,0 { +- device_type = "pci"; +- assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; +- reg = <0x4800 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 99>; +- marvell,pcie-port = <2>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 26>; +- status = "disabled"; +- }; +- +- pcie@10,0 { +- device_type = "pci"; +- assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; +- reg = <0x5000 0 0 0 0>; +- #address-cells = <3>; +- #size-cells = <2>; +- #interrupt-cells = <1>; +- ranges; +- interrupt-map-mask = <0 0 0 0>; +- interrupt-map = <0 0 0 0 &mpic 103>; +- marvell,pcie-port = <3>; +- marvell,pcie-lane = <0>; +- clocks = <&gateclk 27>; +- status = "disabled"; +- }; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts ++++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +@@ -59,6 +59,15 @@ + }; + }; + ++ pcie-controller { ++ status = "okay"; ++ /* Internal mini-PCIe connector */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ }; ++ + internal-regs { + serial@12000 { + clock-frequency = <250000000>; +@@ -172,15 +181,6 @@ + usb@51000 { + status = "okay"; + }; +- +- pcie-controller { +- status = "okay"; +- /* Internal mini-PCIe connector */ +- pcie@1,0 { +- /* Port 0, Lane 0 */ +- status = "okay"; +- }; +- }; + }; + }; + }; diff --git a/target/linux/mvebu/patches-3.10/0060-ARM-kirkwood-Split-DT-and-legacy-MBus-initialization.patch b/target/linux/mvebu/patches-3.10/0060-ARM-kirkwood-Split-DT-and-legacy-MBus-initialization.patch new file mode 100644 index 0000000000..7ab5be59d4 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0060-ARM-kirkwood-Split-DT-and-legacy-MBus-initialization.patch @@ -0,0 +1,52 @@ +From d1989c73eb770891635cc644f091d7524bbfd696 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 23 Jul 2013 07:42:09 -0300 +Subject: [PATCH 060/203] ARM: kirkwood: Split DT and legacy MBus + initialization + +This commit replaces the legacy MBus initialization with the new +DT-based in Kirkwood. For boards that are not yet converted to DT, +we keep the legacy initialization. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/mach-kirkwood/board-dt.c | 1 + + arch/arm/mach-kirkwood/common.c | 8 ++++---- + 2 files changed, 5 insertions(+), 4 deletions(-) + +--- a/arch/arm/mach-kirkwood/board-dt.c ++++ b/arch/arm/mach-kirkwood/board-dt.c +@@ -93,6 +93,7 @@ static void __init kirkwood_dt_init(void + */ + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + ++ BUG_ON(mvebu_mbus_dt_init()); + kirkwood_setup_wins(); + + kirkwood_l2_init(); +--- a/arch/arm/mach-kirkwood/common.c ++++ b/arch/arm/mach-kirkwood/common.c +@@ -527,10 +527,6 @@ void __init kirkwood_cpuidle_init(void) + void __init kirkwood_init_early(void) + { + orion_time_set_base(TIMER_VIRT_BASE); +- +- mvebu_mbus_init("marvell,kirkwood-mbus", +- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, +- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); + } + + int kirkwood_tclk; +@@ -703,6 +699,10 @@ void __init kirkwood_init(void) + */ + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + ++ BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", ++ BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, ++ DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); ++ + kirkwood_setup_wins(); + + kirkwood_l2_init(); diff --git a/target/linux/mvebu/patches-3.10/0061-ARM-kirkwood-Use-the-preprocessor-on-device-tree-fil.patch b/target/linux/mvebu/patches-3.10/0061-ARM-kirkwood-Use-the-preprocessor-on-device-tree-fil.patch new file mode 100644 index 0000000000..190f31f340 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0061-ARM-kirkwood-Use-the-preprocessor-on-device-tree-fil.patch @@ -0,0 +1,485 @@ +From 67bbed6edc12a5f239435c182d9c56ce2c930d87 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 23 Jul 2013 07:45:49 -0300 +Subject: [PATCH 061/203] ARM: kirkwood: Use the preprocessor on device tree + files + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/kirkwood-cloudbox.dts | 4 +-- + arch/arm/boot/dts/kirkwood-dns320.dts | 2 +- + arch/arm/boot/dts/kirkwood-dns325.dts | 2 +- + arch/arm/boot/dts/kirkwood-dnskw.dtsi | 4 +-- + arch/arm/boot/dts/kirkwood-dockstar.dts | 4 +-- + arch/arm/boot/dts/kirkwood-dreamplug.dts | 4 +-- + arch/arm/boot/dts/kirkwood-goflexnet.dts | 4 +-- + .../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 4 +-- + arch/arm/boot/dts/kirkwood-ib62x0.dts | 4 +-- + arch/arm/boot/dts/kirkwood-iconnect.dts | 4 +-- + arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 4 +-- + arch/arm/boot/dts/kirkwood-is2.dts | 2 +- + arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 4 +-- + arch/arm/boot/dts/kirkwood-lschlv2.dts | 2 +- + arch/arm/boot/dts/kirkwood-lsxhl.dts | 2 +- + arch/arm/boot/dts/kirkwood-lsxl.dtsi | 4 +-- + arch/arm/boot/dts/kirkwood-mplcec4.dts | 4 +-- + .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 4 +-- + arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 4 +-- + arch/arm/boot/dts/kirkwood-ns2.dts | 2 +- + arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 +- + arch/arm/boot/dts/kirkwood-ns2max.dts | 2 +- + arch/arm/boot/dts/kirkwood-ns2mini.dts | 2 +- + arch/arm/boot/dts/kirkwood-nsa310.dts | 40 +++++++++++++--------- + arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 4 +-- + arch/arm/boot/dts/kirkwood-topkick.dts | 4 +-- + arch/arm/boot/dts/kirkwood-ts219-6281.dts | 13 +++---- + arch/arm/boot/dts/kirkwood-ts219-6282.dts | 21 ++++++++---- + 28 files changed, 86 insertions(+), 70 deletions(-) + +--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts ++++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "LaCie CloudBox"; +--- a/arch/arm/boot/dts/kirkwood-dns320.dts ++++ b/arch/arm/boot/dts/kirkwood-dns320.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-dnskw.dtsi" ++#include "kirkwood-dnskw.dtsi" + + / { + model = "D-Link DNS-320 NAS (Rev A1)"; +--- a/arch/arm/boot/dts/kirkwood-dns325.dts ++++ b/arch/arm/boot/dts/kirkwood-dns325.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-dnskw.dtsi" ++#include "kirkwood-dnskw.dtsi" + + / { + model = "D-Link DNS-325 NAS (Rev A1)"; +--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi ++++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi +@@ -1,5 +1,5 @@ +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "D-Link DNS NASes (kirkwood-based)"; +--- a/arch/arm/boot/dts/kirkwood-dockstar.dts ++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "Seagate FreeAgent Dockstar"; +--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts ++++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "Globalscale Technologies Dreamplug"; +--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts ++++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "Seagate GoFlex Net"; +--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts ++++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "Globalscale Technologies Guruplug Server Plus"; +--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts ++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; +--- a/arch/arm/boot/dts/kirkwood-iconnect.dts ++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "Iomega Iconnect"; +--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts ++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "Iomega StorCenter ix2-200"; +--- a/arch/arm/boot/dts/kirkwood-is2.dts ++++ b/arch/arm/boot/dts/kirkwood-is2.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-ns2-common.dtsi" ++#include "kirkwood-ns2-common.dtsi" + + / { + model = "LaCie Internet Space v2"; +--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts ++++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-98dx4122.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-98dx4122.dtsi" + + / { + model = "Keymile Kirkwood Reference Design"; +--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts ++++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-lsxl.dtsi" ++#include "kirkwood-lsxl.dtsi" + + / { + model = "Buffalo Linkstation LS-CHLv2"; +--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts ++++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-lsxl.dtsi" ++#include "kirkwood-lsxl.dtsi" + + / { + model = "Buffalo Linkstation LS-XHL"; +--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi ++++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi +@@ -1,5 +1,5 @@ +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + chosen { +--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts ++++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "MPL CEC4"; +--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts ++++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6282.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6282.dtsi" + + / { + model = "NETGEAR ReadyNAS Duo v2"; +--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi ++++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +@@ -1,5 +1,5 @@ +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + chosen { +--- a/arch/arm/boot/dts/kirkwood-ns2.dts ++++ b/arch/arm/boot/dts/kirkwood-ns2.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-ns2-common.dtsi" ++#include "kirkwood-ns2-common.dtsi" + + / { + model = "LaCie Network Space v2"; +--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts ++++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-ns2-common.dtsi" ++#include "kirkwood-ns2-common.dtsi" + + / { + model = "LaCie Network Space Lite v2"; +--- a/arch/arm/boot/dts/kirkwood-ns2max.dts ++++ b/arch/arm/boot/dts/kirkwood-ns2max.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-ns2-common.dtsi" ++#include "kirkwood-ns2-common.dtsi" + + / { + model = "LaCie Network Space Max v2"; +--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts ++++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts +@@ -1,6 +1,6 @@ + /dts-v1/; + +-/include/ "kirkwood-ns2-common.dtsi" ++#include "kirkwood-ns2-common.dtsi" + + / { + /* This machine is embedded in the first LaCie CloudBox product. */ +--- a/arch/arm/boot/dts/kirkwood-nsa310.dts ++++ b/arch/arm/boot/dts/kirkwood-nsa310.dts +@@ -1,6 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" + + / { + model = "ZyXEL NSA310"; +@@ -17,22 +18,7 @@ + + ocp@f1000000 { + pinctrl: pinctrl@10000 { +- pinctrl-0 = < &pmx_led_esata_green +- &pmx_led_esata_red +- &pmx_led_usb_green +- &pmx_led_usb_red +- &pmx_usb_power_off +- &pmx_led_sys_green +- &pmx_led_sys_red +- &pmx_btn_reset +- &pmx_btn_copy +- &pmx_led_copy_green +- &pmx_led_copy_red +- &pmx_led_hdd_green +- &pmx_led_hdd_red +- &pmx_unknown +- &pmx_btn_power +- &pmx_pwr_off >; ++ pinctrl-0 = <&pmx_unknown>; + pinctrl-names = "default"; + + pmx_led_esata_green: pmx-led-esata-green { +@@ -176,12 +162,22 @@ + reg = <0x5040000 0x2fc0000>; + }; + }; ++ ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@1,0 { ++ status = "okay"; ++ }; ++ }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; ++ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; ++ pinctrl-names = "default"; + + button@1 { + label = "Power Button"; +@@ -202,6 +198,12 @@ + + gpio-leds { + compatible = "gpio-leds"; ++ pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red ++ &pmx_led_usb_green &pmx_led_usb_red ++ &pmx_led_sys_green &pmx_led_sys_red ++ &pmx_led_copy_green &pmx_led_copy_red ++ &pmx_led_hdd_green &pmx_led_hdd_red>; ++ pinctrl-names = "default"; + + green-sys { + label = "nsa310:green:sys"; +@@ -247,6 +249,8 @@ + + gpio_poweroff { + compatible = "gpio-poweroff"; ++ pinctrl-0 = <&pmx_pwr_off>; ++ pinctrl-names = "default"; + gpios = <&gpio1 16 0>; + }; + +@@ -254,6 +258,8 @@ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; ++ pinctrl-0 = <&pmx_usb_power_off>; ++ pinctrl-names = "default"; + + usb0_power_off: regulator@1 { + compatible = "regulator-fixed"; +--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts ++++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6282.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6282.dtsi" + + / { + model = "Plat'Home OpenBlocksA6"; +--- a/arch/arm/boot/dts/kirkwood-topkick.dts ++++ b/arch/arm/boot/dts/kirkwood-topkick.dts +@@ -1,7 +1,7 @@ + /dts-v1/; + +-/include/ "kirkwood.dtsi" +-/include/ "kirkwood-6282.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6282.dtsi" + + / { + model = "Univeral Scientific Industrial Co. Topkick-1281P2"; +--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts ++++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts +@@ -1,16 +1,14 @@ + /dts-v1/; + +-/include/ "kirkwood-ts219.dtsi" +-/include/ "kirkwood-6281.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" ++#include "kirkwood-ts219.dtsi" + + / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + +- pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi +- &pmx_twsi0 &pmx_sata0 &pmx_sata1 +- &pmx_ram_size &pmx_reset_button +- &pmx_USB_copy_button &pmx_board_id>; ++ pinctrl-0 = <&pmx_ram_size &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { +@@ -38,6 +36,9 @@ + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; ++ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; ++ pinctrl-names = "default"; ++ + button@1 { + label = "USB Copy"; + linux,code = <133>; +--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts ++++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts +@@ -1,16 +1,14 @@ + /dts-v1/; + +-/include/ "kirkwood-ts219.dtsi" +-/include/ "kirkwood-6282.dtsi" ++#include "kirkwood.dtsi" ++#include "kirkwood-6282.dtsi" ++#include "kirkwood-ts219.dtsi" + + / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + +- pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi +- &pmx_twsi0 &pmx_sata0 &pmx_sata1 +- &pmx_ram_size &pmx_reset_button +- &pmx_USB_copy_button &pmx_board_id>; ++ pinctrl-0 = <&pmx_ram_size &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { +@@ -32,12 +30,23 @@ + marvell,function = "gpio"; + }; + }; ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@2,0 { ++ status = "okay"; ++ }; ++ }; ++ + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; ++ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; ++ pinctrl-names = "default"; ++ + button@1 { + label = "USB Copy"; + linux,code = <133>; diff --git a/target/linux/mvebu/patches-3.10/0062-ARM-kirkwood-Introduce-MBus-DT-node.patch b/target/linux/mvebu/patches-3.10/0062-ARM-kirkwood-Introduce-MBus-DT-node.patch new file mode 100644 index 0000000000..fcedff3225 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0062-ARM-kirkwood-Introduce-MBus-DT-node.patch @@ -0,0 +1,41 @@ +From 9d4a304873c9f6a8bbf78cba329985768a1c6c93 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 23 Jul 2013 07:48:04 -0300 +Subject: [PATCH 062/203] ARM: kirkwood: Introduce MBus DT node + +Add a minimal MBus node, just to allow the MBus driver to probe. +Follow-up patches will migrate the rest of the nodes appropriately. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/kirkwood.dtsi | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/kirkwood.dtsi ++++ b/arch/arm/boot/dts/kirkwood.dtsi +@@ -16,6 +16,11 @@ + <0xf1020214 0x04>; + }; + ++ mbus { ++ compatible = "marvell,kirkwood-mbus", "simple-bus"; ++ controller = <&mbusc>; ++ }; ++ + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf1000000 0x4000000 +@@ -23,6 +28,11 @@ + #address-cells = <1>; + #size-cells = <1>; + ++ mbusc: mbus-controller@20000 { ++ compatible = "marvell,mbus-controller"; ++ reg = <0x20000 0x80>, <0x1500 0x20>; ++ }; ++ + core_clk: core-clocks@10030 { + compatible = "marvell,kirkwood-core-clock"; + reg = <0x10030 0x4>; diff --git a/target/linux/mvebu/patches-3.10/0063-ARM-kirkwood-Introduce-MBUS_ID.patch b/target/linux/mvebu/patches-3.10/0063-ARM-kirkwood-Introduce-MBUS_ID.patch new file mode 100644 index 0000000000..2b9c967d56 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0063-ARM-kirkwood-Introduce-MBUS_ID.patch @@ -0,0 +1,25 @@ +From 32016796bb28ebf748851c166b03159600aa9a00 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 23 Jul 2013 08:33:39 -0300 +Subject: [PATCH 063/203] ARM: kirkwood: Introduce MBUS_ID + +This macro is used to define window's target ID and attribute cells +for the MBus ranges entries. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/kirkwood.dtsi | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm/boot/dts/kirkwood.dtsi ++++ b/arch/arm/boot/dts/kirkwood.dtsi +@@ -1,5 +1,7 @@ + /include/ "skeleton.dtsi" + ++#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) ++ + / { + compatible = "marvell,kirkwood"; + interrupt-parent = <&intc>; diff --git a/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch b/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch new file mode 100644 index 0000000000..be4d3ab16f --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch @@ -0,0 +1,301 @@ +From ae23894bcb163d1f91483b9566dc077f1e863af6 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 23 Jul 2013 08:44:00 -0300 +Subject: [PATCH 064/203] ARM: kirkwood: Relocate PCIe device tree nodes + +Now that mbus has been added to the device tree, it's possible to +move the PCIe nodes out of the ocp node, placing it directly +below the mbus. This is a more accurate representation of the hardware. + +Moving the PCIe nodes, we now need to introduce an extra cell to +encode the window target ID and attribute. Since this depends on +the PCIe port, we split the ranges translation entries, to +correspond to each MBus window. + +In addition, we encode the PCIe memory and I/O apertures in the MBus +node, according to the MBus DT binding specification. The choice made +is 0xe0000000-0xf0000000 for memory space, and 0xf200000-0xf2100000 for +I/O space. These apertures can be changed in each per-board DT file. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + arch/arm/boot/dts/kirkwood-6281.dtsi | 35 ++++++++++++++ + arch/arm/boot/dts/kirkwood-6282.dtsi | 55 ++++++++++++++++++++++ + arch/arm/boot/dts/kirkwood-iconnect.dts | 11 +++++ + arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +++++ + .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++ + arch/arm/boot/dts/kirkwood-nsa310.dts | 19 ++++---- + arch/arm/boot/dts/kirkwood-ts219-6282.dts | 19 ++++---- + arch/arm/boot/dts/kirkwood-ts219.dtsi | 10 ++++ + arch/arm/boot/dts/kirkwood.dtsi | 4 ++ + 9 files changed, 159 insertions(+), 16 deletions(-) + +--- a/arch/arm/boot/dts/kirkwood-6281.dtsi ++++ b/arch/arm/boot/dts/kirkwood-6281.dtsi +@@ -1,4 +1,39 @@ + / { ++ mbus { ++ pcie-controller { ++ compatible = "marvell,kirkwood-pcie"; ++ status = "disabled"; ++ device_type = "pci"; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ bus-range = <0x00 0xff>; ++ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 ++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ ++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; ++ ++ pcie@1,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; ++ reg = <0x0800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 ++ 0x81000000 0 0 0x81000000 0x1 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &intc 9>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gate_clk 2>; ++ status = "disabled"; ++ }; ++ }; ++ }; ++ + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6281-pinctrl"; +--- a/arch/arm/boot/dts/kirkwood-6282.dtsi ++++ b/arch/arm/boot/dts/kirkwood-6282.dtsi +@@ -1,4 +1,59 @@ + / { ++ mbus { ++ pcie-controller { ++ compatible = "marvell,kirkwood-pcie"; ++ status = "disabled"; ++ device_type = "pci"; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ bus-range = <0x00 0xff>; ++ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 ++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 ++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 ++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ ++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ ++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ ++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; ++ ++ pcie@1,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; ++ reg = <0x0800 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 ++ 0x81000000 0 0 0x81000000 0x1 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &intc 9>; ++ marvell,pcie-port = <0>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gate_clk 2>; ++ status = "disabled"; ++ }; ++ ++ pcie@2,0 { ++ device_type = "pci"; ++ assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; ++ reg = <0x1000 0 0 0 0>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 ++ 0x81000000 0 0 0x81000000 0x2 0 1 0>; ++ interrupt-map-mask = <0 0 0 0>; ++ interrupt-map = <0 0 0 0 &intc 10>; ++ marvell,pcie-port = <1>; ++ marvell,pcie-lane = <0>; ++ clocks = <&gate_clk 18>; ++ status = "disabled"; ++ }; ++ }; ++ }; + ocp@f1000000 { + + pinctrl: pinctrl@10000 { +--- a/arch/arm/boot/dts/kirkwood-iconnect.dts ++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts +@@ -18,6 +18,17 @@ + linux,initrd-end = <0x4800000>; + }; + ++ mbus { ++ ranges = ; ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@1,0 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ + ocp@f1000000 { + pinctrl: pinctrl@10000 { + +--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts ++++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts +@@ -16,6 +16,17 @@ + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + ++ mbus { ++ ranges = ; ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@1,0 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ + ocp@f1000000 { + pinctrl: pinctrl@10000 { + +--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts ++++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +@@ -16,6 +16,17 @@ + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + ++ mbus { ++ ranges = ; ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@1,0 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ + ocp@f1000000 { + pinctrl: pinctrl@10000 { + +--- a/arch/arm/boot/dts/kirkwood-nsa310.dts ++++ b/arch/arm/boot/dts/kirkwood-nsa310.dts +@@ -16,6 +16,17 @@ + bootargs = "console=ttyS0,115200"; + }; + ++ mbus { ++ ranges = ; ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@1,0 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = <&pmx_unknown>; +@@ -162,14 +173,6 @@ + reg = <0x5040000 0x2fc0000>; + }; + }; +- +- pcie-controller { +- status = "okay"; +- +- pcie@1,0 { +- status = "okay"; +- }; +- }; + }; + + gpio_keys { +--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts ++++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts +@@ -5,6 +5,17 @@ + #include "kirkwood-ts219.dtsi" + + / { ++ mbus { ++ ranges = ; ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@2,0 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ + ocp@f1000000 { + pinctrl: pinctrl@10000 { + +@@ -30,14 +41,6 @@ + marvell,function = "gpio"; + }; + }; +- pcie-controller { +- status = "okay"; +- +- pcie@2,0 { +- status = "okay"; +- }; +- }; +- + }; + + gpio_keys { +--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi ++++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi +@@ -13,6 +13,16 @@ + bootargs = "console=ttyS0,115200n8"; + }; + ++ mbus { ++ pcie-controller { ++ status = "okay"; ++ ++ pcie@1,0 { ++ status = "okay"; ++ }; ++ }; ++ }; ++ + ocp@f1000000 { + i2c@11000 { + status = "okay"; +--- a/arch/arm/boot/dts/kirkwood.dtsi ++++ b/arch/arm/boot/dts/kirkwood.dtsi +@@ -20,7 +20,11 @@ + + mbus { + compatible = "marvell,kirkwood-mbus", "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <1>; + controller = <&mbusc>; ++ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ ++ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ + }; + + ocp@f1000000 { diff --git a/target/linux/mvebu/patches-3.10/0065-bus-mvebu-mbus-Add-devicetree-binding.patch b/target/linux/mvebu/patches-3.10/0065-bus-mvebu-mbus-Add-devicetree-binding.patch new file mode 100644 index 0000000000..34e3969683 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0065-bus-mvebu-mbus-Add-devicetree-binding.patch @@ -0,0 +1,303 @@ +From 442681ff6aca5e839fe41378ff919df1c340dc62 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 28 May 2013 07:58:31 -0300 +Subject: [PATCH 065/203] bus: mvebu-mbus: Add devicetree binding + +Introduce the devicetree binding for the mvebu MBus driver +avaiable in the mvebu SoCs (Armada 370/XP, Kirkwood, Dove, ...). + +This binding provides an accurate model of the SoC address space, +and allows to declare the address and size of the decoding windows the MBus +needs to access the peripherals, together with the target ID and attribute +for those windows. + +The binding is composed of two required nodes: one for the MBus bus +and one for the MBus controller. + +Signed-off-by: Ezequiel Garcia +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + .../devicetree/bindings/bus/mvebu-mbus.txt | 276 +++++++++++++++++++++ + 1 file changed, 276 insertions(+) + create mode 100644 Documentation/devicetree/bindings/bus/mvebu-mbus.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt +@@ -0,0 +1,276 @@ ++ ++* Marvell MBus ++ ++Required properties: ++ ++- compatible: Should be set to one of the following: ++ marvell,armada370-mbus ++ marvell,armadaxp-mbus ++ marvell,armada370-mbus ++ marvell,armadaxp-mbus ++ marvell,kirkwood-mbus ++ marvell,dove-mbus ++ marvell,orion5x-88f5281-mbus ++ marvell,orion5x-88f5182-mbus ++ marvell,orion5x-88f5181-mbus ++ marvell,orion5x-88f6183-mbus ++ marvell,mv78xx0-mbus ++ ++- address-cells: Must be '2'. The first cell for the MBus ID encoding, ++ the second cell for the address offset within the window. ++ ++- size-cells: Must be '1'. ++ ++- ranges: Must be set up to provide a proper translation for each child. ++ See the examples below. ++ ++- controller: Contains a single phandle referring to the MBus controller ++ node. This allows to specify the node that contains the ++ registers that control the MBus, which is typically contained ++ within the internal register window (see below). ++ ++Optional properties: ++ ++- pcie-mem-aperture: This optional property contains the aperture for ++ the memory region of the PCIe driver. ++ If it's defined, it must encode the base address and ++ size for the address decoding windows allocated for ++ the PCIe memory region. ++ ++- pcie-io-aperture: Just as explained for the above property, this ++ optional property contains the aperture for the ++ I/O region of the PCIe driver. ++ ++* Marvell MBus controller ++ ++Required properties: ++ ++- compatible: Should be set to "marvell,mbus-controller". ++ ++- reg: Device's register space. ++ Two entries are expected (see the examples below): ++ the first one controls the devices decoding window and ++ the second one controls the SDRAM decoding window. ++ ++Example: ++ ++ soc { ++ compatible = "marvell,armada370-mbus", "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ controller = <&mbusc>; ++ pcie-mem-aperture = <0xe0000000 0x8000000>; ++ pcie-io-aperture = <0xe8000000 0x100000>; ++ ++ internal-regs { ++ compatible = "simple-bus"; ++ ++ mbusc: mbus-controller@20000 { ++ compatible = "marvell,mbus-controller"; ++ reg = <0x20000 0x100>, <0x20180 0x20>; ++ }; ++ ++ /* more children ...*/ ++ }; ++ }; ++ ++** MBus address decoding window specification ++ ++The MBus children address space is comprised of two cells: the first one for ++the window ID and the second one for the offset within the window. ++In order to allow to describe valid and non-valid window entries, the ++following encoding is used: ++ ++ 0xSIAA0000 0x00oooooo ++ ++Where: ++ ++ S = 0x0 for a MBus valid window ++ S = 0xf for a non-valid window (see below) ++ ++If S = 0x0, then: ++ ++ I = 4-bit window target ID ++ AA = windpw attribute ++ ++If S = 0xf, then: ++ ++ I = don't care ++ AA = 1 for internal register ++ ++Following the above encoding, for each ranges entry for a MBus valid window ++(S = 0x0), an address decoding window is allocated. On the other side, ++entries for translation that do not correspond to valid windows (S = 0xf) ++are skipped. ++ ++ soc { ++ compatible = "marvell,armada370-mbus", "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ controller = <&mbusc>; ++ ++ ranges = <0xf0010000 0 0 0xd0000000 0x100000 ++ 0x01e00000 0 0 0xfff00000 0x100000>; ++ ++ bootrom { ++ compatible = "marvell,bootrom"; ++ reg = <0x01e00000 0 0x100000>; ++ }; ++ ++ /* other children */ ++ ... ++ ++ internal-regs { ++ compatible = "simple-bus"; ++ ranges = <0 0xf0010000 0 0x100000>; ++ ++ mbusc: mbus-controller@20000 { ++ compatible = "marvell,mbus-controller"; ++ reg = <0x20000 0x100>, <0x20180 0x20>; ++ }; ++ ++ /* more children ...*/ ++ }; ++ }; ++ ++In the shown example, the translation entry in the 'ranges' property is what ++makes the MBus driver create a static decoding window for the corresponding ++given child device. Note that the binding does not require child nodes to be ++present. Of course, child nodes are needed to probe the devices. ++ ++Since each window is identified by its target ID and attribute ID there's ++a special macro that can be use to simplify the translation entries: ++ ++#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) ++ ++Using this macro, the above example would be: ++ ++ soc { ++ compatible = "marvell,armada370-mbus", "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ controller = <&mbusc>; ++ ++ ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 ++ MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>; ++ ++ bootrom { ++ compatible = "marvell,bootrom"; ++ reg = ; ++ }; ++ ++ /* other children */ ++ ... ++ ++ internal-regs { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; ++ ++ mbusc: mbus-controller@20000 { ++ compatible = "marvell,mbus-controller"; ++ reg = <0x20000 0x100>, <0x20180 0x20>; ++ }; ++ ++ /* other children */ ++ ... ++ }; ++ }; ++ ++ ++** About the window base address ++ ++Remember the MBus controller allows a great deal of flexibility for choosing ++the decoding window base address. When planning the device tree layout it's ++possible to choose any address as the base address, provided of course there's ++a region large enough available, and with the required alignment. ++ ++Yet in other words: there's nothing preventing us from setting a base address ++of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is ++unused. ++ ++** Window allocation policy ++ ++The mbus-node ranges property defines a set of mbus windows that are expected ++to be set by the operating system and that are guaranteed to be free of overlaps ++with one another or with the system memory ranges. ++ ++Each entry in the property refers to exactly one window. If the operating system ++choses to use a different set of mbus windows, it must ensure that any address ++translations performed from downstream devices are adapted accordingly. ++ ++The operating system may insert additional mbus windows that do not conflict ++with the ones listed in the ranges, e.g. for mapping PCIe devices. ++As a special case, the internal register window must be set up by the boot ++loader at the address listed in the ranges property, since access to that region ++is needed to set up the other windows. ++ ++** Example ++ ++See the example below, where a more complete device tree is shown: ++ ++ soc { ++ compatible = "marvell,armadaxp-mbus", "simple-bus"; ++ controller = <&mbusc>; ++ ++ ranges = ; ++ ++ bootrom { ++ compatible = "marvell,bootrom"; ++ reg = ; ++ }; ++ ++ devbus-bootcs { ++ status = "okay"; ++ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; ++ ++ /* NOR */ ++ nor { ++ compatible = "cfi-flash"; ++ reg = <0 0x8000000>; ++ bank-width = <2>; ++ }; ++ }; ++ ++ pcie-controller { ++ compatible = "marvell,armada-xp-pcie"; ++ status = "okay"; ++ device_type = "pci"; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ ++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ ++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ ++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ ++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ ++ 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */ ++ 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>; ++ ++ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ }; ++ ++ internal-regs { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; ++ ++ mbusc: mbus-controller@20000 { ++ reg = <0x20000 0x100>, <0x20180 0x20>; ++ }; ++ ++ interrupt-controller@20000 { ++ reg = <0x20a00 0x2d0>, <0x21070 0x58>; ++ }; ++ }; ++ }; diff --git a/target/linux/mvebu/patches-3.10/0066-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch b/target/linux/mvebu/patches-3.10/0066-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch new file mode 100644 index 0000000000..c34ecb6124 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0066-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch @@ -0,0 +1,304 @@ +From 60538f9841697cd4539d353afd8a7f51cd17e4af Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Fri, 5 Jul 2013 14:54:17 +0200 +Subject: [PATCH 066/203] PCI: mvebu: Adapt to the new device tree layout + +The new device tree layout encodes the window's target ID and attribute +in the PCIe controller node's ranges property. This allows to parse +such entries to obtain such information and use the recently introduced +MBus API to create the windows, instead of using the current name based +scheme. + +Acked-by: Bjorn Helgaas +Signed-off-by: Thomas Petazzoni +Tested-by: Andrew Lunn +Tested-by: Sebastian Hesselbarth +--- + .../devicetree/bindings/pci/mvebu-pci.txt | 145 ++++++++++++++++----- + 1 file changed, 109 insertions(+), 36 deletions(-) + +--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt ++++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt +@@ -1,6 +1,7 @@ + * Marvell EBU PCIe interfaces + + Mandatory properties: ++ + - compatible: one of the following values: + marvell,armada-370-pcie + marvell,armada-xp-pcie +@@ -9,11 +10,49 @@ Mandatory properties: + - #interrupt-cells, set to <1> + - bus-range: PCI bus numbers covered + - device_type, set to "pci" +-- ranges: ranges for the PCI memory and I/O regions, as well as the +- MMIO registers to control the PCIe interfaces. ++- ranges: ranges describing the MMIO registers to control the PCIe ++ interfaces, and ranges describing the MBus windows needed to access ++ the memory and I/O regions of each PCIe interface. ++ ++The ranges describing the MMIO registers have the following layout: ++ ++ 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s ++ ++where: ++ ++ * r is a 32-bits value that gives the offset of the MMIO ++ registers of this PCIe interface, from the base of the internal ++ registers. ++ ++ * s is a 32-bits value that give the size of this MMIO ++ registers area. This range entry translates the '0x82000000 0 r' PCI ++ address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part ++ of the internal register window (as identified by MBUS_ID(0xf0, ++ 0x01)). ++ ++The ranges describing the MBus windows have the following layout: ++ ++ 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0 ++ ++where: + +-In addition, the Device Tree node must have sub-nodes describing each ++ * t is the type of the MBus window (as defined by the standard PCI DT ++ bindings), 1 for I/O and 2 for memory. ++ ++ * s is the PCI slot that corresponds to this PCIe interface ++ ++ * w is the 'target ID' value for the MBus window ++ ++ * a the 'attribute' value for the MBus window. ++ ++Since the location and size of the different MBus windows is not fixed in ++hardware, and only determined in runtime, those ranges cover the full first ++4 GB of the physical address space, and do not translate into a valid CPU ++address. ++ ++In addition, the device tree node must have sub-nodes describing each + PCIe interface, having the following mandatory properties: ++ + - reg: used only for interrupt mapping, so only the first four bytes + are used to refer to the correct bus number and device number. + - assigned-addresses: reference to the MMIO registers used to control +@@ -25,7 +64,8 @@ PCIe interface, having the following man + - #address-cells, set to <3> + - #size-cells, set to <2> + - #interrupt-cells, set to <1> +-- ranges, empty property. ++- ranges, translating the MBus windows ranges of the parent node into ++ standard PCI addresses. + - interrupt-map-mask and interrupt-map, standard PCI properties to + define the mapping of the PCIe interface to interrupt numbers. + +@@ -46,27 +86,50 @@ pcie-controller { + + bus-range = <0x00 0xff>; + +- ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ +- 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ +- 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ +- 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ +- 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ +- 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ +- 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ +- 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ +- 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ +- 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ +- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ +- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ ++ ranges = ++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ ++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ ++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ ++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ ++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ ++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ ++ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ ++ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ ++ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ ++ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ ++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ ++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ ++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ ++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ ++ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ ++ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ ++ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ ++ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ ++ ++ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ ++ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ ++ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ ++ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ ++ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ ++ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ ++ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ ++ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ ++ ++ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ ++ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ ++ ++ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ ++ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; +- assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; ++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 ++ 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; +@@ -77,12 +140,13 @@ pcie-controller { + + pcie@2,0 { + device_type = "pci"; +- assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; ++ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 ++ 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; +@@ -93,12 +157,13 @@ pcie-controller { + + pcie@3,0 { + device_type = "pci"; +- assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; ++ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 ++ 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; +@@ -109,12 +174,13 @@ pcie-controller { + + pcie@4,0 { + device_type = "pci"; +- assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; ++ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 ++ 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; +@@ -125,12 +191,13 @@ pcie-controller { + + pcie@5,0 { + device_type = "pci"; +- assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; ++ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 ++ 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; +@@ -141,12 +208,13 @@ pcie-controller { + + pcie@6,0 { + device_type = "pci"; +- assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; ++ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 ++ 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; +@@ -157,12 +225,13 @@ pcie-controller { + + pcie@7,0 { + device_type = "pci"; +- assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; ++ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 ++ 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; +@@ -173,12 +242,13 @@ pcie-controller { + + pcie@8,0 { + device_type = "pci"; +- assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; ++ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 ++ 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; +@@ -186,14 +256,16 @@ pcie-controller { + clocks = <&gateclk 12>; + status = "disabled"; + }; ++ + pcie@9,0 { + device_type = "pci"; +- assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; ++ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 ++ 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; +@@ -204,12 +276,13 @@ pcie-controller { + + pcie@10,0 { + device_type = "pci"; +- assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; ++ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; +- ranges; ++ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 ++ 0x81000000 0 0 0x81000000 0xa 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; diff --git a/target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-for-ethernet-controllers.patch b/target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-for-ethernet-controllers.patch new file mode 100644 index 0000000000..53d79cc5f8 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-for-ethernet-controllers.patch @@ -0,0 +1,90 @@ +From cc4fb487fbf95c97b40e1e8e5b8b2ddabc8d124d Mon Sep 17 00:00:00 2001 +From: Willy Tarreau +Date: Mon, 3 Jun 2013 18:47:36 +0200 +Subject: [PATCH 067/203] ARM: mvebu: set aliases for ethernet controllers + +These aliases are used when feeding the DT from ATAGS to set the +devices MAC addresses. + +Signed-off-by: Willy Tarreau +Signed-off-by: Thomas Petazzoni +Signed-off-by: Jason Cooper +--- + arch/arm/boot/dts/armada-370-xp.dtsi | 9 +++++++-- + arch/arm/boot/dts/armada-xp-mv78460.dtsi | 3 ++- + arch/arm/boot/dts/armada-xp.dtsi | 6 +++++- + 3 files changed, 14 insertions(+), 4 deletions(-) + +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -24,6 +24,11 @@ + model = "Marvell Armada 370 and XP SoC"; + compatible = "marvell,armada-370-xp"; + ++ aliases { ++ eth0 = ð0; ++ eth1 = ð1; ++ }; ++ + cpus { + cpu@0 { + compatible = "marvell,sheeva-v7"; +@@ -151,7 +156,7 @@ + reg = <0x72004 0x4>; + }; + +- ethernet@70000 { ++ eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts = <8>; +@@ -159,7 +164,7 @@ + status = "disabled"; + }; + +- ethernet@74000 { ++ eth1: ethernet@74000 { + compatible = "marvell,armada-370-neta"; + reg = <0x74000 0x4000>; + interrupts = <10>; +--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi +@@ -23,6 +23,7 @@ + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; ++ eth3 = ð3; + }; + + +@@ -326,7 +327,7 @@ + interrupts = <91>; + }; + +- ethernet@34000 { ++ eth3: ethernet@34000 { + compatible = "marvell,armada-370-neta"; + reg = <0x34000 0x4000>; + interrupts = <14>; +--- a/arch/arm/boot/dts/armada-xp.dtsi ++++ b/arch/arm/boot/dts/armada-xp.dtsi +@@ -22,6 +22,10 @@ + model = "Marvell Armada XP family SoC"; + compatible = "marvell,armadaxp", "marvell,armada-370-xp"; + ++ aliases { ++ eth2 = ð2; ++ }; ++ + soc { + compatible = "marvell,armadaxp-mbus", "simple-bus"; + +@@ -93,7 +97,7 @@ + reg = <0x18200 0x500>; + }; + +- ethernet@30000 { ++ eth2: ethernet@30000 { + compatible = "marvell,armada-370-neta"; + reg = <0x30000 0x4000>; + interrupts = <12>; diff --git a/target/linux/mvebu/patches-3.10/0068-ARM-mvebu-use-correct-interrupt-cells-instead-of-int.patch b/target/linux/mvebu/patches-3.10/0068-ARM-mvebu-use-correct-interrupt-cells-instead-of-int.patch new file mode 100644 index 0000000000..efd444159e --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0068-ARM-mvebu-use-correct-interrupt-cells-instead-of-int.patch @@ -0,0 +1,127 @@ +From d967b31469239f610ea84b0a54ce296c15d860e9 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Tue, 30 Jul 2013 16:59:02 +0200 +Subject: [PATCH 068/203] ARM: mvebu: use correct #interrupt-cells instead of + #interrupts-cells + +The Device Tree information for the GPIO banks of the Armada 370 and +Armada XP SOCs was incorrectly using #interrupts-cells instead of +controller when using GPIO interrupts, since the GPIO bank DT node +wasn't recognized as a valid interrupt controller by the OF code. + +Signed-off-by: Thomas Petazzoni +Signed-off-by: Jason Cooper +--- + arch/arm/boot/dts/armada-370.dtsi | 6 +++--- + arch/arm/boot/dts/armada-xp-mv78230.dtsi | 4 ++-- + arch/arm/boot/dts/armada-xp-mv78260.dtsi | 6 +++--- + arch/arm/boot/dts/armada-xp-mv78460.dtsi | 6 +++--- + 4 files changed, 11 insertions(+), 11 deletions(-) + +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -136,7 +136,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + +@@ -147,7 +147,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + +@@ -158,7 +158,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <91>; + }; + +--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi +@@ -181,7 +181,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + +@@ -192,7 +192,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>; + }; + +--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi +@@ -203,7 +203,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + +@@ -214,7 +214,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + +@@ -225,7 +225,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <91>; + }; + +--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi +@@ -301,7 +301,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + +@@ -312,7 +312,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + +@@ -323,7 +323,7 @@ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +- #interrupts-cells = <2>; ++ #interrupt-cells = <2>; + interrupts = <91>; + }; + diff --git a/target/linux/mvebu/patches-3.10/0069-ARM-mvebu-use-dts-pre-processor-for-mv78230.patch b/target/linux/mvebu/patches-3.10/0069-ARM-mvebu-use-dts-pre-processor-for-mv78230.patch new file mode 100644 index 0000000000..4961b714e5 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0069-ARM-mvebu-use-dts-pre-processor-for-mv78230.patch @@ -0,0 +1,21 @@ +From 3953e4230483d6ce51b9f7e3b20db30e5ca6f4da Mon Sep 17 00:00:00 2001 +From: Jason Cooper +Date: Wed, 7 Aug 2013 20:04:21 +0000 +Subject: [PATCH 069/203] ARM: mvebu: use dts pre-processor for mv78230 + +Signed-off-by: Jason Cooper +--- + arch/arm/boot/dts/armada-xp-mv78230.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi +@@ -13,7 +13,7 @@ + * common to all Armada XP SoCs. + */ + +-/include/ "armada-xp.dtsi" ++#include "armada-xp.dtsi" + + / { + model = "Marvell Armada XP MV78230 SoC"; diff --git a/target/linux/mvebu/patches-3.10/0070-PCI-use-weak-functions-for-MSI-arch-specific-functio.patch b/target/linux/mvebu/patches-3.10/0070-PCI-use-weak-functions-for-MSI-arch-specific-functio.patch new file mode 100644 index 0000000000..364898c5e8 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0070-PCI-use-weak-functions-for-MSI-arch-specific-functio.patch @@ -0,0 +1,291 @@ +From 4fb403ed86e78027a5b85333fa1491d5a0e68ae9 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Wed, 19 Jun 2013 09:42:32 +0200 +Subject: [PATCH 070/203] PCI: use weak functions for MSI arch-specific + functions + +Until now, the MSI architecture-specific functions could be overloaded +using a fairly complex set of #define and compile-time +conditionals. In order to prepare for the introduction of the msi_chip +infrastructure, it is desirable to switch all those functions to use +the 'weak' mechanism. This commit converts all the architectures that +were overidding those MSI functions to use the new strategy. + +Note that we keep two separate, non-weak, functions +default_teardown_msi_irqs() and default_restore_msi_irqs() for the +default behavior of the arch_teardown_msi_irqs() and +arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI +code. + +Signed-off-by: Thomas Petazzoni +Acked-by: Bjorn Helgaas +Acked-by: Benjamin Herrenschmidt +Tested-by: Daniel Price +Tested-by: Thierry Reding +Cc: Benjamin Herrenschmidt +Cc: Paul Mackerras +Cc: linuxppc-dev@lists.ozlabs.org +Cc: Martin Schwidefsky +Cc: Heiko Carstens +Cc: linux390@de.ibm.com +Cc: linux-s390@vger.kernel.org +Cc: Thomas Gleixner +Cc: Ingo Molnar +Cc: H. Peter Anvin +Cc: x86@kernel.org +Cc: Russell King +Cc: Tony Luck +Cc: Fenghua Yu +Cc: linux-ia64@vger.kernel.org +Cc: Ralf Baechle +Cc: linux-mips@linux-mips.org +Cc: David S. Miller +Cc: sparclinux@vger.kernel.org +Cc: Chris Metcalf +--- + arch/mips/include/asm/pci.h | 5 ----- + arch/powerpc/include/asm/pci.h | 5 ----- + arch/s390/include/asm/pci.h | 4 ---- + arch/x86/include/asm/pci.h | 30 -------------------------- + arch/x86/kernel/x86_init.c | 24 +++++++++++++++++++++ + drivers/pci/msi.c | 48 +++++++++++++++++++++--------------------- + include/linux/msi.h | 8 ++++++- + 7 files changed, 55 insertions(+), 69 deletions(-) + +--- a/arch/mips/include/asm/pci.h ++++ b/arch/mips/include/asm/pci.h +@@ -137,11 +137,6 @@ static inline int pci_get_legacy_ide_irq + return channel ? 15 : 14; + } + +-#ifdef CONFIG_CPU_CAVIUM_OCTEON +-/* MSI arch hook for OCTEON */ +-#define arch_setup_msi_irqs arch_setup_msi_irqs +-#endif +- + extern char * (*pcibios_plat_setup)(char *str); + + #ifdef CONFIG_OF +--- a/arch/powerpc/include/asm/pci.h ++++ b/arch/powerpc/include/asm/pci.h +@@ -113,11 +113,6 @@ extern int pci_domain_nr(struct pci_bus + /* Decide whether to display the domain number in /proc */ + extern int pci_proc_domain(struct pci_bus *bus); + +-/* MSI arch hooks */ +-#define arch_setup_msi_irqs arch_setup_msi_irqs +-#define arch_teardown_msi_irqs arch_teardown_msi_irqs +-#define arch_msi_check_device arch_msi_check_device +- + struct vm_area_struct; + /* Map a range of PCI memory or I/O space for a device into user space */ + int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, +--- a/arch/s390/include/asm/pci.h ++++ b/arch/s390/include/asm/pci.h +@@ -21,10 +21,6 @@ void pci_iounmap(struct pci_dev *, void + int pci_domain_nr(struct pci_bus *); + int pci_proc_domain(struct pci_bus *); + +-/* MSI arch hooks */ +-#define arch_setup_msi_irqs arch_setup_msi_irqs +-#define arch_teardown_msi_irqs arch_teardown_msi_irqs +- + #define ZPCI_BUS_NR 0 /* default bus number */ + #define ZPCI_DEVFN 0 /* default device number */ + +--- a/arch/x86/include/asm/pci.h ++++ b/arch/x86/include/asm/pci.h +@@ -100,29 +100,6 @@ static inline void early_quirks(void) { + extern void pci_iommu_alloc(void); + + #ifdef CONFIG_PCI_MSI +-/* MSI arch specific hooks */ +-static inline int x86_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +-{ +- return x86_msi.setup_msi_irqs(dev, nvec, type); +-} +- +-static inline void x86_teardown_msi_irqs(struct pci_dev *dev) +-{ +- x86_msi.teardown_msi_irqs(dev); +-} +- +-static inline void x86_teardown_msi_irq(unsigned int irq) +-{ +- x86_msi.teardown_msi_irq(irq); +-} +-static inline void x86_restore_msi_irqs(struct pci_dev *dev, int irq) +-{ +- x86_msi.restore_msi_irqs(dev, irq); +-} +-#define arch_setup_msi_irqs x86_setup_msi_irqs +-#define arch_teardown_msi_irqs x86_teardown_msi_irqs +-#define arch_teardown_msi_irq x86_teardown_msi_irq +-#define arch_restore_msi_irqs x86_restore_msi_irqs + /* implemented in arch/x86/kernel/apic/io_apic. */ + struct msi_desc; + int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); +@@ -130,16 +107,9 @@ void native_teardown_msi_irq(unsigned in + void native_restore_msi_irqs(struct pci_dev *dev, int irq); + int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, + unsigned int irq_base, unsigned int irq_offset); +-/* default to the implementation in drivers/lib/msi.c */ +-#define HAVE_DEFAULT_MSI_TEARDOWN_IRQS +-#define HAVE_DEFAULT_MSI_RESTORE_IRQS +-void default_teardown_msi_irqs(struct pci_dev *dev); +-void default_restore_msi_irqs(struct pci_dev *dev, int irq); + #else + #define native_setup_msi_irqs NULL + #define native_teardown_msi_irq NULL +-#define default_teardown_msi_irqs NULL +-#define default_restore_msi_irqs NULL + #endif + + #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) +--- a/arch/x86/kernel/x86_init.c ++++ b/arch/x86/kernel/x86_init.c +@@ -107,6 +107,8 @@ struct x86_platform_ops x86_platform = { + }; + + EXPORT_SYMBOL_GPL(x86_platform); ++ ++#if defined(CONFIG_PCI_MSI) + struct x86_msi_ops x86_msi = { + .setup_msi_irqs = native_setup_msi_irqs, + .compose_msi_msg = native_compose_msi_msg, +@@ -116,6 +118,28 @@ struct x86_msi_ops x86_msi = { + .setup_hpet_msi = default_setup_hpet_msi, + }; + ++/* MSI arch specific hooks */ ++int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) ++{ ++ return x86_msi.setup_msi_irqs(dev, nvec, type); ++} ++ ++void arch_teardown_msi_irqs(struct pci_dev *dev) ++{ ++ x86_msi.teardown_msi_irqs(dev); ++} ++ ++void arch_teardown_msi_irq(unsigned int irq) ++{ ++ x86_msi.teardown_msi_irq(irq); ++} ++ ++void arch_restore_msi_irqs(struct pci_dev *dev, int irq) ++{ ++ x86_msi.restore_msi_irqs(dev, irq); ++} ++#endif ++ + struct x86_io_apic_ops x86_io_apic_ops = { + .init = native_io_apic_init_mappings, + .read = native_io_apic_read, +--- a/drivers/pci/msi.c ++++ b/drivers/pci/msi.c +@@ -30,20 +30,21 @@ static int pci_msi_enable = 1; + + /* Arch hooks */ + +-#ifndef arch_msi_check_device +-int arch_msi_check_device(struct pci_dev *dev, int nvec, int type) ++int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) ++{ ++ return -EINVAL; ++} ++ ++void __weak arch_teardown_msi_irq(unsigned int irq) + { +- return 0; + } +-#endif + +-#ifndef arch_setup_msi_irqs +-# define arch_setup_msi_irqs default_setup_msi_irqs +-# define HAVE_DEFAULT_MSI_SETUP_IRQS +-#endif ++int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type) ++{ ++ return 0; ++} + +-#ifdef HAVE_DEFAULT_MSI_SETUP_IRQS +-int default_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) ++int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) + { + struct msi_desc *entry; + int ret; +@@ -65,14 +66,11 @@ int default_setup_msi_irqs(struct pci_de + + return 0; + } +-#endif + +-#ifndef arch_teardown_msi_irqs +-# define arch_teardown_msi_irqs default_teardown_msi_irqs +-# define HAVE_DEFAULT_MSI_TEARDOWN_IRQS +-#endif +- +-#ifdef HAVE_DEFAULT_MSI_TEARDOWN_IRQS ++/* ++ * We have a default implementation available as a separate non-weak ++ * function, as it is used by the Xen x86 PCI code ++ */ + void default_teardown_msi_irqs(struct pci_dev *dev) + { + struct msi_desc *entry; +@@ -86,14 +84,12 @@ void default_teardown_msi_irqs(struct pc + arch_teardown_msi_irq(entry->irq + i); + } + } +-#endif + +-#ifndef arch_restore_msi_irqs +-# define arch_restore_msi_irqs default_restore_msi_irqs +-# define HAVE_DEFAULT_MSI_RESTORE_IRQS +-#endif ++void __weak arch_teardown_msi_irqs(struct pci_dev *dev) ++{ ++ return default_teardown_msi_irqs(dev); ++} + +-#ifdef HAVE_DEFAULT_MSI_RESTORE_IRQS + void default_restore_msi_irqs(struct pci_dev *dev, int irq) + { + struct msi_desc *entry; +@@ -111,7 +107,11 @@ void default_restore_msi_irqs(struct pci + if (entry) + write_msi_msg(irq, &entry->msg); + } +-#endif ++ ++void __weak arch_restore_msi_irqs(struct pci_dev *dev, int irq) ++{ ++ return default_restore_msi_irqs(dev, irq); ++} + + static void msi_set_enable(struct pci_dev *dev, int enable) + { +--- a/include/linux/msi.h ++++ b/include/linux/msi.h +@@ -50,12 +50,18 @@ struct msi_desc { + }; + + /* +- * The arch hook for setup up msi irqs ++ * The arch hooks to setup up msi irqs. Those functions are ++ * implemented as weak symbols so that they /can/ be overriden by ++ * architecture specific code if needed. + */ + int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc); + void arch_teardown_msi_irq(unsigned int irq); + int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); + void arch_teardown_msi_irqs(struct pci_dev *dev); + int arch_msi_check_device(struct pci_dev* dev, int nvec, int type); ++void arch_restore_msi_irqs(struct pci_dev *dev, int irq); ++ ++void default_teardown_msi_irqs(struct pci_dev *dev); ++void default_restore_msi_irqs(struct pci_dev *dev, int irq); + + #endif /* LINUX_MSI_H */ diff --git a/target/linux/mvebu/patches-3.10/0071-PCI-remove-ARCH_SUPPORTS_MSI-kconfig-option.patch b/target/linux/mvebu/patches-3.10/0071-PCI-remove-ARCH_SUPPORTS_MSI-kconfig-option.patch new file mode 100644 index 0000000000..7655127ee8 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0071-PCI-remove-ARCH_SUPPORTS_MSI-kconfig-option.patch @@ -0,0 +1,152 @@ +From c819a1b0907257d73de96af33d557668a5c0c895 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Mon, 1 Jul 2013 14:26:57 +0200 +Subject: [PATCH 071/203] PCI: remove ARCH_SUPPORTS_MSI kconfig option + +Now that we have weak versions for each of the PCI MSI architecture +functions, we can actually build the MSI support for all platforms, +regardless of whether they provide or not architecture-specific +versions of those functions. For this reason, the ARCH_SUPPORTS_MSI +hidden kconfig boolean becomes useless, and this patch gets rid of it. + +Signed-off-by: Thomas Petazzoni +Acked-by: Bjorn Helgaas +Acked-by: Benjamin Herrenschmidt +Tested-by: Daniel Price +Tested-by: Thierry Reding +Cc: Benjamin Herrenschmidt +Cc: Paul Mackerras +Cc: linuxppc-dev@lists.ozlabs.org +Cc: Martin Schwidefsky +Cc: Heiko Carstens +Cc: linux390@de.ibm.com +Cc: linux-s390@vger.kernel.org +Cc: Thomas Gleixner +Cc: Ingo Molnar +Cc: H. Peter Anvin +Cc: x86@kernel.org +Cc: Russell King +Cc: Tony Luck +Cc: Fenghua Yu +Cc: linux-ia64@vger.kernel.org +Cc: Ralf Baechle +Cc: linux-mips@linux-mips.org +Cc: David S. Miller +Cc: sparclinux@vger.kernel.org +Cc: Chris Metcalf +--- + arch/arm/Kconfig | 1 - + arch/ia64/Kconfig | 1 - + arch/mips/Kconfig | 2 -- + arch/powerpc/Kconfig | 1 - + arch/s390/Kconfig | 1 - + arch/sparc/Kconfig | 1 - + arch/tile/Kconfig | 1 - + arch/x86/Kconfig | 1 - + drivers/pci/Kconfig | 4 ---- + 9 files changed, 13 deletions(-) + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -435,7 +435,6 @@ config ARCH_NETX + config ARCH_IOP13XX + bool "IOP13xx-based" + depends on MMU +- select ARCH_SUPPORTS_MSI + select CPU_XSC3 + select NEED_MACH_MEMORY_H + select NEED_RET_TO_USER +--- a/arch/ia64/Kconfig ++++ b/arch/ia64/Kconfig +@@ -9,7 +9,6 @@ config IA64 + select PCI if (!IA64_HP_SIM) + select ACPI if (!IA64_HP_SIM) + select PM if (!IA64_HP_SIM) +- select ARCH_SUPPORTS_MSI + select HAVE_UNSTABLE_SCHED_CLOCK + select HAVE_IDE + select HAVE_OPROFILE +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -764,7 +764,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD + select SYS_HAS_CPU_CAVIUM_OCTEON + select SWAP_IO_SPACE + select HW_HAS_PCI +- select ARCH_SUPPORTS_MSI + select ZONE_DMA32 + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI +@@ -800,7 +799,6 @@ config NLM_XLR_BOARD + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU +- select ARCH_SUPPORTS_MSI + select ZONE_DMA32 if 64BIT + select SYNC_R4K + select SYS_HAS_EARLY_PRINTK +--- a/arch/powerpc/Kconfig ++++ b/arch/powerpc/Kconfig +@@ -734,7 +734,6 @@ config PCI + default y if !40x && !CPM2 && !8xx && !PPC_83xx \ + && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON + default PCI_QSPAN if !4xx && !CPM2 && 8xx +- select ARCH_SUPPORTS_MSI + select GENERIC_PCI_IOMAP + help + Find out whether your system includes a PCI bus. PCI is the name of +--- a/arch/s390/Kconfig ++++ b/arch/s390/Kconfig +@@ -430,7 +430,6 @@ menuconfig PCI + bool "PCI support" + default n + depends on 64BIT +- select ARCH_SUPPORTS_MSI + select PCI_MSI + help + Enable PCI support. +--- a/arch/sparc/Kconfig ++++ b/arch/sparc/Kconfig +@@ -52,7 +52,6 @@ config SPARC32 + + config SPARC64 + def_bool 64BIT +- select ARCH_SUPPORTS_MSI + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_GRAPH_FP_TEST +--- a/arch/tile/Kconfig ++++ b/arch/tile/Kconfig +@@ -379,7 +379,6 @@ config PCI + select PCI_DOMAINS + select GENERIC_PCI_IOMAP + select TILE_GXIO_TRIO if TILEGX +- select ARCH_SUPPORTS_MSI if TILEGX + select PCI_MSI if TILEGX + ---help--- + Enable PCI root complex support, so PCIe endpoint devices can +--- a/arch/x86/Kconfig ++++ b/arch/x86/Kconfig +@@ -1999,7 +1999,6 @@ menu "Bus options (PCI etc.)" + config PCI + bool "PCI support" + default y +- select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) + ---help--- + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside +--- a/drivers/pci/Kconfig ++++ b/drivers/pci/Kconfig +@@ -1,13 +1,9 @@ + # + # PCI configuration + # +-config ARCH_SUPPORTS_MSI +- bool +- + config PCI_MSI + bool "Message Signaled Interrupts (MSI and MSI-X)" + depends on PCI +- depends on ARCH_SUPPORTS_MSI + help + This allows device drivers to enable MSI (Message Signaled + Interrupts). Message Signaled Interrupts enable a device to diff --git a/target/linux/mvebu/patches-3.10/0072-PCI-Introduce-new-MSI-chip-infrastructure.patch b/target/linux/mvebu/patches-3.10/0072-PCI-Introduce-new-MSI-chip-infrastructure.patch new file mode 100644 index 0000000000..291a3b37c9 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0072-PCI-Introduce-new-MSI-chip-infrastructure.patch @@ -0,0 +1,108 @@ +From 9c6ddccbbfaf789beccc6a1d87abe9bc60dc570f Mon Sep 17 00:00:00 2001 +From: Thierry Reding +Date: Thu, 6 Jun 2013 18:20:29 +0200 +Subject: [PATCH 072/203] PCI: Introduce new MSI chip infrastructure + +The new struct msi_chip is used to associated an MSI controller with a +PCI bus. It is automatically handed down from the root to its children +during bus enumeration. + +This patch provides default (weak) implementations for the architecture- +specific MSI functions (arch_setup_msi_irq(), arch_teardown_msi_irq() +and arch_msi_check_device()) which check if a PCI device's bus has an +attached MSI chip and forward the call appropriately. + +Signed-off-by: Thierry Reding +Signed-off-by: Thomas Petazzoni +Acked-by: Bjorn Helgaas +Tested-by: Daniel Price +Tested-by: Thierry Reding +--- + drivers/pci/msi.c | 27 +++++++++++++++++++++++++-- + drivers/pci/probe.c | 1 + + include/linux/msi.h | 11 +++++++++++ + include/linux/pci.h | 1 + + 4 files changed, 38 insertions(+), 2 deletions(-) + +--- a/drivers/pci/msi.c ++++ b/drivers/pci/msi.c +@@ -32,16 +32,39 @@ static int pci_msi_enable = 1; + + int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) + { +- return -EINVAL; ++ struct msi_chip *chip = dev->bus->msi; ++ int err; ++ ++ if (!chip || !chip->setup_irq) ++ return -EINVAL; ++ ++ err = chip->setup_irq(chip, dev, desc); ++ if (err < 0) ++ return err; ++ ++ irq_set_chip_data(desc->irq, chip); ++ ++ return 0; + } + + void __weak arch_teardown_msi_irq(unsigned int irq) + { ++ struct msi_chip *chip = irq_get_chip_data(irq); ++ ++ if (!chip || !chip->teardown_irq) ++ return; ++ ++ chip->teardown_irq(chip, irq); + } + + int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type) + { +- return 0; ++ struct msi_chip *chip = dev->bus->msi; ++ ++ if (!chip || !chip->check_device) ++ return 0; ++ ++ return chip->check_device(chip, dev, nvec, type); + } + + int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +--- a/drivers/pci/probe.c ++++ b/drivers/pci/probe.c +@@ -634,6 +634,7 @@ static struct pci_bus *pci_alloc_child_b + + child->parent = parent; + child->ops = parent->ops; ++ child->msi = parent->msi; + child->sysdata = parent->sysdata; + child->bus_flags = parent->bus_flags; + +--- a/include/linux/msi.h ++++ b/include/linux/msi.h +@@ -64,4 +64,15 @@ void arch_restore_msi_irqs(struct pci_de + void default_teardown_msi_irqs(struct pci_dev *dev); + void default_restore_msi_irqs(struct pci_dev *dev, int irq); + ++struct msi_chip { ++ struct module *owner; ++ struct device *dev; ++ ++ int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev, ++ struct msi_desc *desc); ++ void (*teardown_irq)(struct msi_chip *chip, unsigned int irq); ++ int (*check_device)(struct msi_chip *chip, struct pci_dev *dev, ++ int nvec, int type); ++}; ++ + #endif /* LINUX_MSI_H */ +--- a/include/linux/pci.h ++++ b/include/linux/pci.h +@@ -432,6 +432,7 @@ struct pci_bus { + struct resource busn_res; /* bus numbers routed to this bus */ + + struct pci_ops *ops; /* configuration access functions */ ++ struct msi_chip *msi; /* MSI controller */ + void *sysdata; /* hook for sys-specific extension */ + struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */ + diff --git a/target/linux/mvebu/patches-3.10/0073-of-pci-add-registry-of-MSI-chips.patch b/target/linux/mvebu/patches-3.10/0073-of-pci-add-registry-of-MSI-chips.patch new file mode 100644 index 0000000000..641b8d1701 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0073-of-pci-add-registry-of-MSI-chips.patch @@ -0,0 +1,106 @@ +From a05852e828063b6731fcac543b87367c137c16f8 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Thu, 6 Jun 2013 18:21:18 +0200 +Subject: [PATCH 073/203] of: pci: add registry of MSI chips + +This commit adds a very basic registry of msi_chip structures, so that +an IRQ controller driver can register an msi_chip, and a PCIe host +controller can find it, based on a 'struct device_node'. + +Signed-off-by: Thomas Petazzoni +Acked-by: Benjamin Herrenschmidt +Acked-by: Rob Herring +--- + drivers/of/of_pci.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ + include/linux/msi.h | 2 ++ + include/linux/of_pci.h | 12 ++++++++++++ + 3 files changed, 59 insertions(+) + +--- a/drivers/of/of_pci.c ++++ b/drivers/of/of_pci.c +@@ -89,3 +89,48 @@ int of_pci_parse_bus_range(struct device + return 0; + } + EXPORT_SYMBOL_GPL(of_pci_parse_bus_range); ++ ++#ifdef CONFIG_PCI_MSI ++ ++static LIST_HEAD(of_pci_msi_chip_list); ++static DEFINE_MUTEX(of_pci_msi_chip_mutex); ++ ++int of_pci_msi_chip_add(struct msi_chip *chip) ++{ ++ if (!of_property_read_bool(chip->of_node, "msi-controller")) ++ return -EINVAL; ++ ++ mutex_lock(&of_pci_msi_chip_mutex); ++ list_add(&chip->list, &of_pci_msi_chip_list); ++ mutex_unlock(&of_pci_msi_chip_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(of_pci_msi_chip_add); ++ ++void of_pci_msi_chip_remove(struct msi_chip *chip) ++{ ++ mutex_lock(&of_pci_msi_chip_mutex); ++ list_del(&chip->list); ++ mutex_unlock(&of_pci_msi_chip_mutex); ++} ++EXPORT_SYMBOL_GPL(of_pci_msi_chip_remove); ++ ++struct msi_chip *of_pci_find_msi_chip_by_node(struct device_node *of_node) ++{ ++ struct msi_chip *c; ++ ++ mutex_lock(&of_pci_msi_chip_mutex); ++ list_for_each_entry(c, &of_pci_msi_chip_list, list) { ++ if (c->of_node == of_node) { ++ mutex_unlock(&of_pci_msi_chip_mutex); ++ return c; ++ } ++ } ++ mutex_unlock(&of_pci_msi_chip_mutex); ++ ++ return NULL; ++} ++EXPORT_SYMBOL_GPL(of_pci_find_msi_chip_by_node); ++ ++#endif /* CONFIG_PCI_MSI */ +--- a/include/linux/msi.h ++++ b/include/linux/msi.h +@@ -67,6 +67,8 @@ void default_restore_msi_irqs(struct pci + struct msi_chip { + struct module *owner; + struct device *dev; ++ struct device_node *of_node; ++ struct list_head list; + + int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev, + struct msi_desc *desc); +--- a/include/linux/of_pci.h ++++ b/include/linux/of_pci.h +@@ -2,6 +2,7 @@ + #define __OF_PCI_H + + #include ++#include + + struct pci_dev; + struct of_irq; +@@ -13,4 +14,15 @@ struct device_node *of_pci_find_child_de + int of_pci_get_devfn(struct device_node *np); + int of_pci_parse_bus_range(struct device_node *node, struct resource *res); + ++#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI) ++int of_pci_msi_chip_add(struct msi_chip *chip); ++void of_pci_msi_chip_remove(struct msi_chip *chip); ++struct msi_chip *of_pci_find_msi_chip_by_node(struct device_node *of_node); ++#else ++static inline int of_pci_msi_chip_add(struct msi_chip *chip) { return -EINVAL; } ++static inline void of_pci_msi_chip_remove(struct msi_chip *chip) { } ++static inline struct msi_chip * ++of_pci_find_msi_chip_by_node(struct device_node *of_node) { return NULL; } ++#endif ++ + #endif diff --git a/target/linux/mvebu/patches-3.10/0074-irqchip-armada-370-xp-properly-request-resources.patch b/target/linux/mvebu/patches-3.10/0074-irqchip-armada-370-xp-properly-request-resources.patch new file mode 100644 index 0000000000..1cb99118c9 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0074-irqchip-armada-370-xp-properly-request-resources.patch @@ -0,0 +1,64 @@ +From c8efa45217cbd780dafe12d87b61554c2e19a010 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Thu, 6 Jun 2013 18:22:51 +0200 +Subject: [PATCH 074/203] irqchip: armada-370-xp: properly request resources + +Instead of using of_iomap(), we now use of_address_to_resource(), +request_mem_region() and ioremap(). This allows the corresponding I/O +regions to be properly requested and visible in /proc/iomem. + +The main motivation for this change is that the introduction of the +MSI support requires us to get the physical address of the main +interrupt controller registers, so we will need the corresponding +'struct resource' anyway. + +We also take this opportunity to change a panic() to BUG_ON(), in +order to be consistent with the rest of the driver. + +Signed-off-by: Thomas Petazzoni +Tested-by: Daniel Price +Acked-by: Gregory CLEMENT +--- + drivers/irqchip/irq-armada-370-xp.c | 20 ++++++++++++++++---- + 1 file changed, 16 insertions(+), 4 deletions(-) + +--- a/drivers/irqchip/irq-armada-370-xp.c ++++ b/drivers/irqchip/irq-armada-370-xp.c +@@ -248,12 +248,25 @@ armada_370_xp_handle_irq(struct pt_regs + static int __init armada_370_xp_mpic_of_init(struct device_node *node, + struct device_node *parent) + { ++ struct resource main_int_res, per_cpu_int_res; + u32 control; + +- main_int_base = of_iomap(node, 0); +- per_cpu_int_base = of_iomap(node, 1); ++ BUG_ON(of_address_to_resource(node, 0, &main_int_res)); ++ BUG_ON(of_address_to_resource(node, 1, &per_cpu_int_res)); + ++ BUG_ON(!request_mem_region(main_int_res.start, ++ resource_size(&main_int_res), ++ node->full_name)); ++ BUG_ON(!request_mem_region(per_cpu_int_res.start, ++ resource_size(&per_cpu_int_res), ++ node->full_name)); ++ ++ main_int_base = ioremap(main_int_res.start, ++ resource_size(&main_int_res)); + BUG_ON(!main_int_base); ++ ++ per_cpu_int_base = ioremap(per_cpu_int_res.start, ++ resource_size(&per_cpu_int_res)); + BUG_ON(!per_cpu_int_base); + + control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); +@@ -262,8 +275,7 @@ static int __init armada_370_xp_mpic_of_ + irq_domain_add_linear(node, (control >> 2) & 0x3ff, + &armada_370_xp_mpic_irq_ops, NULL); + +- if (!armada_370_xp_mpic_domain) +- panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); ++ BUG_ON(!armada_370_xp_mpic_domain); + + irq_set_default_host(armada_370_xp_mpic_domain); + diff --git a/target/linux/mvebu/patches-3.10/0075-irqchip-armada-370-xp-implement-MSI-support.patch b/target/linux/mvebu/patches-3.10/0075-irqchip-armada-370-xp-implement-MSI-support.patch new file mode 100644 index 0000000000..999b493c55 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0075-irqchip-armada-370-xp-implement-MSI-support.patch @@ -0,0 +1,270 @@ +From eaa70d53f6b827f147d775a3de7ff3ef27d0fae6 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Thu, 6 Jun 2013 18:25:16 +0200 +Subject: [PATCH 075/203] irqchip: armada-370-xp: implement MSI support + +This commit introduces the support for the MSI interrupts in the +armada-370-xp interrupt controller driver. It registers an MSI chip to +the MSI chip registry, which will be used by the Marvell PCIe host +controller driver. + +The MSI interrupts use the 16 high doorbells, and are therefore +notified using IRQ1 of the main interrupt controller. + +Signed-off-by: Thomas Petazzoni +Acked-by: Gregory CLEMENT +--- + .../devicetree/bindings/arm/armada-370-xp-mpic.txt | 3 + + drivers/irqchip/irq-armada-370-xp.c | 182 ++++++++++++++++++++- + 2 files changed, 184 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt ++++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt +@@ -4,6 +4,8 @@ Marvell Armada 370 and Armada XP Interru + Required properties: + - compatible: Should be "marvell,mpic" + - interrupt-controller: Identifies the node as an interrupt controller. ++- msi-controller: Identifies the node as an PCI Message Signaled ++ Interrupt controller. + - #interrupt-cells: The number of cells to define the interrupts. Should be 1. + The cell is the IRQ number + +@@ -24,6 +26,7 @@ Example: + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; ++ msi-controller; + reg = <0xd0020a00 0x1d0>, + <0xd0021070 0x58>; + }; +--- a/drivers/irqchip/irq-armada-370-xp.c ++++ b/drivers/irqchip/irq-armada-370-xp.c +@@ -21,7 +21,10 @@ + #include + #include + #include ++#include + #include ++#include ++#include + #include + #include + #include +@@ -51,12 +54,22 @@ + #define IPI_DOORBELL_START (0) + #define IPI_DOORBELL_END (8) + #define IPI_DOORBELL_MASK 0xFF ++#define PCI_MSI_DOORBELL_START (16) ++#define PCI_MSI_DOORBELL_NR (16) ++#define PCI_MSI_DOORBELL_END (32) ++#define PCI_MSI_DOORBELL_MASK 0xFFFF0000 + + static DEFINE_RAW_SPINLOCK(irq_controller_lock); + + static void __iomem *per_cpu_int_base; + static void __iomem *main_int_base; + static struct irq_domain *armada_370_xp_mpic_domain; ++#ifdef CONFIG_PCI_MSI ++static struct irq_domain *armada_370_xp_msi_domain; ++static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR); ++static DEFINE_MUTEX(msi_used_lock); ++static phys_addr_t msi_doorbell_addr; ++#endif + + /* + * In SMP mode: +@@ -87,6 +100,144 @@ static void armada_370_xp_irq_unmask(str + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); + } + ++#ifdef CONFIG_PCI_MSI ++ ++static int armada_370_xp_alloc_msi(void) ++{ ++ int hwirq; ++ ++ mutex_lock(&msi_used_lock); ++ hwirq = find_first_zero_bit(&msi_used, PCI_MSI_DOORBELL_NR); ++ if (hwirq >= PCI_MSI_DOORBELL_NR) ++ hwirq = -ENOSPC; ++ else ++ set_bit(hwirq, msi_used); ++ mutex_unlock(&msi_used_lock); ++ ++ return hwirq; ++} ++ ++static void armada_370_xp_free_msi(int hwirq) ++{ ++ mutex_lock(&msi_used_lock); ++ if (!test_bit(hwirq, msi_used)) ++ pr_err("trying to free unused MSI#%d\n", hwirq); ++ else ++ clear_bit(hwirq, msi_used); ++ mutex_unlock(&msi_used_lock); ++} ++ ++static int armada_370_xp_setup_msi_irq(struct msi_chip *chip, ++ struct pci_dev *pdev, ++ struct msi_desc *desc) ++{ ++ struct msi_msg msg; ++ irq_hw_number_t hwirq; ++ int virq; ++ ++ hwirq = armada_370_xp_alloc_msi(); ++ if (hwirq < 0) ++ return hwirq; ++ ++ virq = irq_create_mapping(armada_370_xp_msi_domain, hwirq); ++ if (!virq) { ++ armada_370_xp_free_msi(hwirq); ++ return -EINVAL; ++ } ++ ++ irq_set_msi_desc(virq, desc); ++ ++ msg.address_lo = msi_doorbell_addr; ++ msg.address_hi = 0; ++ msg.data = 0xf00 | (hwirq + 16); ++ ++ write_msi_msg(virq, &msg); ++ return 0; ++} ++ ++static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip, ++ unsigned int irq) ++{ ++ struct irq_data *d = irq_get_irq_data(irq); ++ irq_dispose_mapping(irq); ++ armada_370_xp_free_msi(d->hwirq); ++} ++ ++static struct irq_chip armada_370_xp_msi_irq_chip = { ++ .name = "armada_370_xp_msi_irq", ++ .irq_enable = unmask_msi_irq, ++ .irq_disable = mask_msi_irq, ++ .irq_mask = mask_msi_irq, ++ .irq_unmask = unmask_msi_irq, ++}; ++ ++static int armada_370_xp_msi_map(struct irq_domain *domain, unsigned int virq, ++ irq_hw_number_t hw) ++{ ++ irq_set_chip_and_handler(virq, &armada_370_xp_msi_irq_chip, ++ handle_simple_irq); ++ set_irq_flags(virq, IRQF_VALID); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops armada_370_xp_msi_irq_ops = { ++ .map = armada_370_xp_msi_map, ++}; ++ ++static int armada_370_xp_msi_init(struct device_node *node, ++ phys_addr_t main_int_phys_base) ++{ ++ struct msi_chip *msi_chip; ++ u32 reg; ++ int ret; ++ ++ msi_doorbell_addr = main_int_phys_base + ++ ARMADA_370_XP_SW_TRIG_INT_OFFS; ++ ++ msi_chip = kzalloc(sizeof(*msi_chip), GFP_KERNEL); ++ if (!msi_chip) ++ return -ENOMEM; ++ ++ msi_chip->setup_irq = armada_370_xp_setup_msi_irq; ++ msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq; ++ msi_chip->of_node = node; ++ ++ armada_370_xp_msi_domain = ++ irq_domain_add_linear(NULL, PCI_MSI_DOORBELL_NR, ++ &armada_370_xp_msi_irq_ops, ++ NULL); ++ if (!armada_370_xp_msi_domain) { ++ kfree(msi_chip); ++ return -ENOMEM; ++ } ++ ++ ret = of_pci_msi_chip_add(msi_chip); ++ if (ret < 0) { ++ irq_domain_remove(armada_370_xp_msi_domain); ++ kfree(msi_chip); ++ return ret; ++ } ++ ++ reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS) ++ | PCI_MSI_DOORBELL_MASK; ++ ++ writel(reg, per_cpu_int_base + ++ ARMADA_370_XP_IN_DRBEL_MSK_OFFS); ++ ++ /* Unmask IPI interrupt */ ++ writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); ++ ++ return 0; ++} ++#else ++static inline int armada_370_xp_msi_init(struct device_node *node, ++ phys_addr_t main_int_phys_base) ++{ ++ return 0; ++} ++#endif ++ + #ifdef CONFIG_SMP + static int armada_xp_set_affinity(struct irq_data *d, + const struct cpumask *mask_val, bool force) +@@ -214,12 +365,39 @@ armada_370_xp_handle_irq(struct pt_regs + if (irqnr > 1022) + break; + +- if (irqnr > 0) { ++ if (irqnr > 1) { + irqnr = irq_find_mapping(armada_370_xp_mpic_domain, + irqnr); + handle_IRQ(irqnr, regs); + continue; + } ++ ++#ifdef CONFIG_PCI_MSI ++ /* MSI handling */ ++ if (irqnr == 1) { ++ u32 msimask, msinr; ++ ++ msimask = readl_relaxed(per_cpu_int_base + ++ ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) ++ & PCI_MSI_DOORBELL_MASK; ++ ++ writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base + ++ ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); ++ ++ for (msinr = PCI_MSI_DOORBELL_START; ++ msinr < PCI_MSI_DOORBELL_END; msinr++) { ++ int irq; ++ ++ if (!(msimask & BIT(msinr))) ++ continue; ++ ++ irq = irq_find_mapping(armada_370_xp_msi_domain, ++ msinr - 16); ++ handle_IRQ(irq, regs); ++ } ++ } ++#endif ++ + #ifdef CONFIG_SMP + /* IPI Handling */ + if (irqnr == 0) { +@@ -292,6 +470,8 @@ static int __init armada_370_xp_mpic_of_ + + #endif + ++ armada_370_xp_msi_init(node, main_int_res.start); ++ + set_handle_irq(armada_370_xp_handle_irq); + + return 0; diff --git a/target/linux/mvebu/patches-3.10/0076-ARM-pci-add-add_bus-and-remove_bus-hooks-to-hw_pci.patch b/target/linux/mvebu/patches-3.10/0076-ARM-pci-add-add_bus-and-remove_bus-hooks-to-hw_pci.patch new file mode 100644 index 0000000000..adae3145b9 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0076-ARM-pci-add-add_bus-and-remove_bus-hooks-to-hw_pci.patch @@ -0,0 +1,80 @@ +From ea6a42a34462ea382209ff4f083b8b17260eb409 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Wed, 19 Jun 2013 18:27:20 +0200 +Subject: [PATCH 076/203] ARM: pci: add ->add_bus() and ->remove_bus() hooks to + hw_pci + +Some PCI drivers may need to adjust the pci_bus structure after it has +been allocated by the Linux PCI core. The PCI core allows +architectures to implement the pcibios_add_bus() and +pcibios_remove_bus() for this purpose. This commit therefore extends +the hw_pci and pci_sys_data structures of the ARM PCI core to allow +PCI drivers to register ->add_bus() and ->remove_bus() in hw_pci, +which will get called when a bus is added or removed from the system. + +This will be used for example by the Marvell PCIe driver to connect a +particular PCI bus with its corresponding MSI chip to handle Message +Signaled Interrupts. + +Signed-off-by: Thomas Petazzoni +Reviewed-by: Thierry Reding +Acked-by: Russell King +Tested-by: Daniel Price +Tested-by: Thierry Reding +--- + arch/arm/include/asm/mach/pci.h | 4 ++++ + arch/arm/kernel/bios32.c | 16 ++++++++++++++++ + 2 files changed, 20 insertions(+) + +--- a/arch/arm/include/asm/mach/pci.h ++++ b/arch/arm/include/asm/mach/pci.h +@@ -35,6 +35,8 @@ struct hw_pci { + resource_size_t start, + resource_size_t size, + resource_size_t align); ++ void (*add_bus)(struct pci_bus *bus); ++ void (*remove_bus)(struct pci_bus *bus); + }; + + /* +@@ -62,6 +64,8 @@ struct pci_sys_data { + resource_size_t start, + resource_size_t size, + resource_size_t align); ++ void (*add_bus)(struct pci_bus *bus); ++ void (*remove_bus)(struct pci_bus *bus); + void *private_data; /* platform controller private data */ + }; + +--- a/arch/arm/kernel/bios32.c ++++ b/arch/arm/kernel/bios32.c +@@ -363,6 +363,20 @@ void pcibios_fixup_bus(struct pci_bus *b + } + EXPORT_SYMBOL(pcibios_fixup_bus); + ++void pcibios_add_bus(struct pci_bus *bus) ++{ ++ struct pci_sys_data *sys = bus->sysdata; ++ if (sys->add_bus) ++ sys->add_bus(bus); ++} ++ ++void pcibios_remove_bus(struct pci_bus *bus) ++{ ++ struct pci_sys_data *sys = bus->sysdata; ++ if (sys->remove_bus) ++ sys->remove_bus(bus); ++} ++ + /* + * Swizzle the device pin each time we cross a bridge. If a platform does + * not provide a swizzle function, we perform the standard PCI swizzling. +@@ -463,6 +477,8 @@ static void pcibios_init_hw(struct hw_pc + sys->swizzle = hw->swizzle; + sys->map_irq = hw->map_irq; + sys->align_resource = hw->align_resource; ++ sys->add_bus = hw->add_bus; ++ sys->remove_bus = hw->remove_bus; + INIT_LIST_HEAD(&sys->resources); + + if (hw->private_data) diff --git a/target/linux/mvebu/patches-3.10/0077-ARM-mvebu-the-MPIC-now-provides-MSI-controller-featu.patch b/target/linux/mvebu/patches-3.10/0077-ARM-mvebu-the-MPIC-now-provides-MSI-controller-featu.patch new file mode 100644 index 0000000000..dcce8691d6 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0077-ARM-mvebu-the-MPIC-now-provides-MSI-controller-featu.patch @@ -0,0 +1,28 @@ +From 2ae5acab1c267ef1c5e61e5086b93fba8eb9752e Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Thu, 6 Jun 2013 18:26:29 +0200 +Subject: [PATCH 077/203] ARM: mvebu: the MPIC now provides MSI controller + features + +Adds the 'msi-controller' property to the main interrupt controller +Device Tree node, to indicate that it can now behave as a MSI +controller. + +Signed-off-by: Thomas Petazzoni +Reviewed-by: Thierry Reding +Tested-by: Daniel Price +Acked-by: Gregory CLEMENT +--- + arch/arm/boot/dts/armada-370-xp.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -109,6 +109,7 @@ + #interrupt-cells = <1>; + #size-cells = <1>; + interrupt-controller; ++ msi-controller; + }; + + coherency-fabric@20200 { diff --git a/target/linux/mvebu/patches-3.10/0078-PCI-mvebu-add-support-for-MSI.patch b/target/linux/mvebu/patches-3.10/0078-PCI-mvebu-add-support-for-MSI.patch new file mode 100644 index 0000000000..9121b82dc6 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0078-PCI-mvebu-add-support-for-MSI.patch @@ -0,0 +1,109 @@ +From be448338edda73460dc3e8c005b17edddf1c1b4f Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Thu, 6 Jun 2013 18:27:16 +0200 +Subject: [PATCH 078/203] PCI: mvebu: add support for MSI + +This commit adds support for Message Signaled Interrupts in the +Marvell PCIe host controller. The work is very simple: it simply gets +a reference to the msi_chip associated to the PCIe controller thanks +to the msi-parent DT property, and stores this reference in the +pci_bus structure. This is enough to let the Linux PCI core use the +functions of msi_chip to setup and teardown MSIs. + +Signed-off-by: Thomas Petazzoni +Reviewed-by: Thierry Reding +Acked-by: Bjorn Helgaas +--- + .../devicetree/bindings/pci/mvebu-pci.txt | 3 +++ + drivers/pci/host/pci-mvebu.c | 26 ++++++++++++++++++++++ + 2 files changed, 29 insertions(+) + +--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt ++++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt +@@ -14,6 +14,8 @@ Mandatory properties: + interfaces, and ranges describing the MBus windows needed to access + the memory and I/O regions of each PCIe interface. + ++- msi-parent: Link to the hardware entity that serves as the Message ++ Signaled Interrupt controller for this PCI controller. + The ranges describing the MMIO registers have the following layout: + + 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s +@@ -85,6 +87,7 @@ pcie-controller { + #size-cells = <2>; + + bus-range = <0x00 0xff>; ++ msi-parent = <&mpic>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ +--- a/drivers/pci/host/pci-mvebu.c ++++ b/drivers/pci/host/pci-mvebu.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -103,6 +104,7 @@ struct mvebu_pcie_port; + struct mvebu_pcie { + struct platform_device *pdev; + struct mvebu_pcie_port *ports; ++ struct msi_chip *msi; + struct resource io; + struct resource realio; + struct resource mem; +@@ -673,6 +675,12 @@ static struct pci_bus *mvebu_pcie_scan_b + return bus; + } + ++void mvebu_pcie_add_bus(struct pci_bus *bus) ++{ ++ struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); ++ bus->msi = pcie->msi; ++} ++ + resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, +@@ -709,6 +717,7 @@ static void __init mvebu_pcie_enable(str + hw.map_irq = mvebu_pcie_map_irq; + hw.ops = &mvebu_pcie_ops; + hw.align_resource = mvebu_pcie_align_resource; ++ hw.add_bus = mvebu_pcie_add_bus; + + pci_common_init(&hw); + } +@@ -733,6 +742,21 @@ mvebu_pcie_map_registers(struct platform + return devm_request_and_ioremap(&pdev->dev, ®s); + } + ++static void __init mvebu_pcie_msi_enable(struct mvebu_pcie *pcie) ++{ ++ struct device_node *msi_node; ++ ++ msi_node = of_parse_phandle(pcie->pdev->dev.of_node, ++ "msi-parent", 0); ++ if (!msi_node) ++ return; ++ ++ pcie->msi = of_pci_find_msi_chip_by_node(msi_node); ++ ++ if (pcie->msi) ++ pcie->msi->dev = &pcie->pdev->dev; ++} ++ + #define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03) + #define DT_TYPE_IO 0x1 + #define DT_TYPE_MEM32 0x2 +@@ -911,6 +935,8 @@ static int __init mvebu_pcie_probe(struc + i++; + } + ++ mvebu_pcie_msi_enable(pcie); ++ + mvebu_pcie_enable(pcie); + + return 0; diff --git a/target/linux/mvebu/patches-3.10/0079-ARM-mvebu-link-PCIe-controllers-to-the-MSI-controlle.patch b/target/linux/mvebu/patches-3.10/0079-ARM-mvebu-link-PCIe-controllers-to-the-MSI-controlle.patch new file mode 100644 index 0000000000..3cb1bf3a84 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0079-ARM-mvebu-link-PCIe-controllers-to-the-MSI-controlle.patch @@ -0,0 +1,60 @@ +From 7171305e9caebac8cd12ef5a5ef3823f0fbe4a1c Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Thu, 6 Jun 2013 18:30:19 +0200 +Subject: [PATCH 079/203] ARM: mvebu: link PCIe controllers to the MSI + controller + +This commit adjusts the Armada 370 and Armada XP PCIe controllers +Device Tree informations to reference their MSI controller. In the +case of this platform, the MSI controller is implemented by the MPIC. + +Signed-off-by: Thomas Petazzoni +Tested-by: Daniel Price +Acked-by: Gregory CLEMENT +--- + arch/arm/boot/dts/armada-370.dtsi | 1 + + arch/arm/boot/dts/armada-xp-mv78230.dtsi | 1 + + arch/arm/boot/dts/armada-xp-mv78260.dtsi | 1 + + arch/arm/boot/dts/armada-xp-mv78460.dtsi | 1 + + 4 files changed, 4 insertions(+) + +--- a/arch/arm/boot/dts/armada-370.dtsi ++++ b/arch/arm/boot/dts/armada-370.dtsi +@@ -44,6 +44,7 @@ + #address-cells = <3>; + #size-cells = <2>; + ++ msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = +--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi +@@ -57,6 +57,7 @@ + #address-cells = <3>; + #size-cells = <2>; + ++ msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = +--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi +@@ -58,6 +58,7 @@ + #address-cells = <3>; + #size-cells = <2>; + ++ msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = +--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi ++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi +@@ -74,6 +74,7 @@ + #address-cells = <3>; + #size-cells = <2>; + ++ msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = diff --git a/target/linux/mvebu/patches-3.10/0080-of-provide-a-binding-for-the-fixed-link-property.patch b/target/linux/mvebu/patches-3.10/0080-of-provide-a-binding-for-the-fixed-link-property.patch new file mode 100644 index 0000000000..76105b39fc --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0080-of-provide-a-binding-for-the-fixed-link-property.patch @@ -0,0 +1,132 @@ +From 5378928ebac13756fc13d0b2de8dd45ace8026aa Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Mon, 15 Jul 2013 17:34:08 +0200 +Subject: [PATCH 080/203] of: provide a binding for the 'fixed-link' property + +Some Ethernet MACs have a "fixed link", and are not connected to a +normal MDIO-managed PHY device. For those situations, a Device Tree +binding allows to describe a "fixed link", as a "fixed-link" property +of the Ethernet device Device Tree node. + +This patch adds: + + * A documentation for the Device Tree property "fixed-link". + + * A of_phy_register_fixed_link() OF helper, which provided an OF node + that contains a "fixed-link" property, registers the corresponding + fixed PHY. + + * Removes the warning on the of_phy_connect_fixed_link() that says + new drivers should not use it, since Grant Likely indicated that + this "fixed-link" property is indeed the way to go. + +Signed-off-by: Thomas Petazzoni +--- + .../devicetree/bindings/net/fixed-link.txt | 26 ++++++++++++++++ + drivers/of/of_mdio.c | 36 +++++++++++++++++++--- + include/linux/of_mdio.h | 10 ++++++ + 3 files changed, 68 insertions(+), 4 deletions(-) + create mode 100644 Documentation/devicetree/bindings/net/fixed-link.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/fixed-link.txt +@@ -0,0 +1,26 @@ ++Fixed link Device Tree binding ++------------------------------ ++ ++Some Ethernet MACs have a "fixed link", and are not connected to a ++normal MDIO-managed PHY device. For those situations, a Device Tree ++binding allows to describe a "fixed link". ++ ++Such a fixed link situation is described within an Ethernet device ++Device Tree node using a 'fixed-link' property, composed of 5 ++elements: ++ ++ 1. A fake PHY ID, which must be unique accross all fixed-link PHYs in ++ the system. ++ 2. The duplex (1 for full-duplex, 0 for half-duplex) ++ 3. The speed (10, 100, 1000) ++ 4. The pause setting (1 for enabled, 0 for disabled) ++ 5. The asym pause setting (1 for enabled, 0 for disabled) ++ ++Example: ++ ++ethernet@0 { ++ ... ++ fixed-link = <1 1 1000 0 0>; ++ ... ++}; ++ +--- a/drivers/of/of_mdio.c ++++ b/drivers/of/of_mdio.c +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -215,10 +216,6 @@ EXPORT_SYMBOL(of_phy_connect); + * @dev: pointer to net_device claiming the phy + * @hndlr: Link state callback for the network device + * @iface: PHY data interface type +- * +- * This function is a temporary stop-gap and will be removed soon. It is +- * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers. Do +- * not call this function from new drivers. + */ + struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, + void (*hndlr)(struct net_device *), +@@ -247,3 +244,34 @@ struct phy_device *of_phy_connect_fixed_ + return IS_ERR(phy) ? NULL : phy; + } + EXPORT_SYMBOL(of_phy_connect_fixed_link); ++ ++#if defined(CONFIG_FIXED_PHY) ++/** ++ * of_phy_register_fixed_link - Parse fixed-link property and register a dummy phy ++ * @np: pointer to the OF device node that contains the "fixed-link" ++ * property for which a dummy phy should be registered. ++ */ ++#define FIXED_LINK_PROPERTIES_COUNT 5 ++int of_phy_register_fixed_link(struct device_node *np) ++{ ++ struct fixed_phy_status status = {}; ++ u32 fixed_link_props[FIXED_LINK_PROPERTIES_COUNT]; ++ int ret; ++ ++ ret = of_property_read_u32_array(np, "fixed-link", ++ fixed_link_props, ++ FIXED_LINK_PROPERTIES_COUNT); ++ if (ret < 0) ++ return ret; ++ ++ status.link = 1; ++ status.duplex = fixed_link_props[1]; ++ status.speed = fixed_link_props[2]; ++ status.pause = fixed_link_props[3]; ++ status.asym_pause = fixed_link_props[4]; ++ ++ return fixed_phy_add(PHY_POLL, fixed_link_props[0], ++ &status); ++} ++EXPORT_SYMBOL(of_phy_register_fixed_link); ++#endif +--- a/include/linux/of_mdio.h ++++ b/include/linux/of_mdio.h +@@ -57,4 +57,14 @@ static inline struct mii_bus *of_mdio_fi + } + #endif /* CONFIG_OF */ + ++#if defined(CONFIG_OF) && defined(CONFIG_FIXED_PHY) ++extern int of_phy_register_fixed_link(struct device_node *np); ++#else ++static inline int of_phy_register_fixed_link(struct device_node *np) ++{ ++ return -ENOSYS; ++} ++#endif ++ ++ + #endif /* __LINUX_OF_MDIO_H */ diff --git a/target/linux/mvebu/patches-3.10/0081-net-phy-call-mdiobus_scan-after-adding-a-fixed-PHY.patch b/target/linux/mvebu/patches-3.10/0081-net-phy-call-mdiobus_scan-after-adding-a-fixed-PHY.patch new file mode 100644 index 0000000000..c052068138 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0081-net-phy-call-mdiobus_scan-after-adding-a-fixed-PHY.patch @@ -0,0 +1,42 @@ +From dce33dc5a6ba5f7fcbab4d7e92cc68c756a1f714 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Mon, 15 Jul 2013 17:34:09 +0200 +Subject: [PATCH 081/203] net: phy: call mdiobus_scan() after adding a fixed + PHY + +The fixed_phy_add() function allows to register a fixed PHY. However, +when this function gets called *after* fixed_mdio_bus_init() (which +gets called at the module_init stage), then the fixed PHY is not +registered into the phylib. + +In order to address this, we add a call to mdiobus_scan() in +fixed_phy_add() to ensure that the PHY indeed gets registered into the +phylib, even if the fixed_phy_add() is called after +fixed_mdio_bus_init(). + +This is needed because until now, the only code that was calling the +fixed_add_phy() function was PowerPC-specific platform code, which +could ensure that such fixed PHYs get registered before +fixed_mdio_bus_init() is called. + +However, with the new of_phy_register_fixed_link() function, device +drivers can parse their 'fixed-link' property and register a fixed PHY +at ->probe() time, which may happen after fixed_mdio_bus_init() is +called. + +Signed-off-by: Thomas Petazzoni +--- + drivers/net/phy/fixed.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/net/phy/fixed.c ++++ b/drivers/net/phy/fixed.c +@@ -195,6 +195,8 @@ int fixed_phy_add(unsigned int irq, int + + list_add_tail(&fp->node, &fmb->phys); + ++ mdiobus_scan(fmb->mii_bus, phy_id); ++ + return 0; + + err_regs: diff --git a/target/linux/mvebu/patches-3.10/0082-net-mvneta-add-support-for-fixed-links.patch b/target/linux/mvebu/patches-3.10/0082-net-mvneta-add-support-for-fixed-links.patch new file mode 100644 index 0000000000..019d80921b --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0082-net-mvneta-add-support-for-fixed-links.patch @@ -0,0 +1,90 @@ +From 350a4e8e9d517d2d7c48bc915da5b1e30163add3 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Mon, 15 Jul 2013 17:34:10 +0200 +Subject: [PATCH 082/203] net: mvneta: add support for fixed links + +Following the introduction of of_phy_register_fixed_link(), this patch +introduces fixed link support in the mvneta driver, for Marvell Armada +370/XP SOCs. + +Signed-off-by: Thomas Petazzoni +--- + .../bindings/net/marvell-armada-370-neta.txt | 24 +++++++++++++++++++--- + drivers/net/ethernet/marvell/mvneta.c | 18 +++++++++++----- + 2 files changed, 34 insertions(+), 8 deletions(-) + +--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt ++++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +@@ -4,13 +4,21 @@ Required properties: + - compatible: should be "marvell,armada-370-neta". + - reg: address and length of the register set for the device. + - interrupts: interrupt for the device +-- phy: A phandle to a phy node defining the PHY address (as the reg +- property, a single integer). + - phy-mode: The interface between the SoC and the PHY (a string that + of_get_phy_mode() can understand) + - clocks: a pointer to the reference clock for this device. + +-Example: ++Optional properties: ++ ++- phy: A phandle to a phy node defining the PHY address (as the reg ++ property, a single integer). Note: if this property isn't present, ++ then fixed link is assumed, and the 'fixed-link' property is ++ mandatory. ++- fixed-link: A 5 elements array that describe a fixed link, see ++ fixed-link.txt for details. Note: if a 'phy' property is present, ++ this 'fixed-link' property is ignored. ++ ++Examples: + + ethernet@d0070000 { + compatible = "marvell,armada-370-neta"; +@@ -21,3 +29,13 @@ ethernet@d0070000 { + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; ++ ++ethernet@d0070000 { ++ compatible = "marvell,armada-370-neta"; ++ reg = <0xd0070000 0x2500>; ++ interrupts = <8>; ++ clocks = <&gate_clk 4>; ++ status = "okay"; ++ fixed-link = <1 1 1000 0 0>; ++ phy-mode = "rgmii-id"; ++}; +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -2360,8 +2360,12 @@ static int mvneta_mdio_probe(struct mvne + { + struct phy_device *phy_dev; + +- phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0, +- pp->phy_interface); ++ if (pp->phy_node) ++ phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0, ++ pp->phy_interface); ++ else ++ phy_dev = of_phy_connect_fixed_link(pp->dev, mvneta_adjust_link, ++ pp->phy_interface); + if (!phy_dev) { + netdev_err(pp->dev, "could not find the PHY\n"); + return -ENODEV; +@@ -2719,9 +2723,13 @@ static int mvneta_probe(struct platform_ + + phy_node = of_parse_phandle(dn, "phy", 0); + if (!phy_node) { +- dev_err(&pdev->dev, "no associated PHY\n"); +- err = -ENODEV; +- goto err_free_irq; ++ /* No 'phy' found, see if we have a 'fixed-link' ++ * property */ ++ err = of_phy_register_fixed_link(dn); ++ if (err < 0) { ++ dev_err(&pdev->dev, "no 'phy' or 'fixed-link' properties\n"); ++ goto err_free_irq; ++ } + } + + phy_mode = of_get_phy_mode(dn); diff --git a/target/linux/mvebu/patches-3.10/0083-clocksource-armada-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch b/target/linux/mvebu/patches-3.10/0083-clocksource-armada-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch new file mode 100644 index 0000000000..3e20113302 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0083-clocksource-armada-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch @@ -0,0 +1,84 @@ +From 409885c9ec1b0dba5c8f393af6d481c69bfa9b0a Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 13 Aug 2013 11:43:12 -0300 +Subject: [PATCH 083/203] clocksource: armada-370-xp: Use + CLOCKSOURCE_OF_DECLARE + +This is almost cosmetic: we achieve a bit of consistency with +other clocksource drivers by using the CLOCKSOURCE_OF_DECLARE +macro for the boilerplate code. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Daniel Lezcano +Reviewed-by: Andrew Lunn +--- + arch/arm/mach-mvebu/armada-370-xp.c | 4 ++-- + drivers/clocksource/time-armada-370-xp.c | 6 +++--- + include/linux/time-armada-370-xp.h | 18 ------------------ + 3 files changed, 5 insertions(+), 23 deletions(-) + delete mode 100644 include/linux/time-armada-370-xp.h + +--- a/arch/arm/mach-mvebu/armada-370-xp.c ++++ b/arch/arm/mach-mvebu/armada-370-xp.c +@@ -17,7 +17,7 @@ + #include + #include + #include +-#include ++#include + #include + #include + #include +@@ -38,7 +38,7 @@ static void __init armada_370_xp_map_io( + static void __init armada_370_xp_timer_and_clk_init(void) + { + mvebu_clocks_init(); +- armada_370_xp_timer_init(); ++ clocksource_of_init(); + coherency_init(); + BUG_ON(mvebu_mbus_dt_init()); + #ifdef CONFIG_CACHE_L2X0 +--- a/drivers/clocksource/time-armada-370-xp.c ++++ b/drivers/clocksource/time-armada-370-xp.c +@@ -210,13 +210,11 @@ static struct local_timer_ops armada_370 + .stop = armada_370_xp_timer_stop, + }; + +-void __init armada_370_xp_timer_init(void) ++static void __init armada_370_xp_timer_init(struct device_node *np) + { + u32 u; +- struct device_node *np; + int res; + +- np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer"); + timer_base = of_iomap(np, 0); + WARN_ON(!timer_base); + local_base = of_iomap(np, 1); +@@ -299,3 +297,5 @@ void __init armada_370_xp_timer_init(voi + #endif + } + } ++CLOCKSOURCE_OF_DECLARE(armada_370_xp, "marvell,armada-370-xp-timer", ++ armada_370_xp_timer_init); +--- a/include/linux/time-armada-370-xp.h ++++ /dev/null +@@ -1,18 +0,0 @@ +-/* +- * Marvell Armada 370/XP SoC timer handling. +- * +- * Copyright (C) 2012 Marvell +- * +- * Lior Amsalem +- * Gregory CLEMENT +- * Thomas Petazzoni +- * +- */ +-#ifndef __TIME_ARMADA_370_XPPRCMU_H +-#define __TIME_ARMADA_370_XPPRCMU_H +- +-#include +- +-void __init armada_370_xp_timer_init(void); +- +-#endif diff --git a/target/linux/mvebu/patches-3.10/0084-arm-clocksource-mvebu-Use-the-main-timer-as-clock-so.patch b/target/linux/mvebu/patches-3.10/0084-arm-clocksource-mvebu-Use-the-main-timer-as-clock-so.patch new file mode 100644 index 0000000000..dccc259cd7 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0084-arm-clocksource-mvebu-Use-the-main-timer-as-clock-so.patch @@ -0,0 +1,33 @@ +From 02b0213923da41034a766942508d882f9be51efd Mon Sep 17 00:00:00 2001 +From: Jean Pihet +Date: Wed, 18 Sep 2013 20:55:09 +0200 +Subject: [PATCH 084/203] arm: clocksource: mvebu: Use the main timer as clock + source from DT + +This commit: + 573145f08c2b92c45498468afbbba909f6ce6135 + clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE + +replaced a call to the driver's timer initialization by a call to +clocksource_of_init(). However, it failed to select CONFIG_CLKSRC_OF. + +Fix this by selecting CONFIG_CLKSRC_OF for Armada370/XP machines. +Without this change the kernel is stuck at: 'Calibrating delay loop...'. + +Signed-off-by: Jean Pihet +Acked-by: Ezequiel Garcia +Signed-off-by: Daniel Lezcano +--- + drivers/clocksource/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/clocksource/Kconfig ++++ b/drivers/clocksource/Kconfig +@@ -24,6 +24,7 @@ config DW_APB_TIMER_OF + + config ARMADA_370_XP_TIMER + bool ++ select CLKSRC_OF + + config SUN4I_TIMER + bool diff --git a/target/linux/mvebu/patches-3.10/0085-irqchip-armada-370-xp-fix-IPI-race-condition.patch b/target/linux/mvebu/patches-3.10/0085-irqchip-armada-370-xp-fix-IPI-race-condition.patch new file mode 100644 index 0000000000..336ad8d758 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0085-irqchip-armada-370-xp-fix-IPI-race-condition.patch @@ -0,0 +1,46 @@ +From 60b78d28057f9f1ecce39955755d26e4cd3130de Mon Sep 17 00:00:00 2001 +From: Lior Amsalem +Date: Mon, 25 Nov 2013 17:26:44 +0100 +Subject: [PATCH 085/203] irqchip: armada-370-xp: fix IPI race condition + +In the Armada 370/XP driver, when we receive an IRQ 0, we read the +list of doorbells that caused the interrupt from register +ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS. This gives the list of IPIs that +were generated. However, instead of acknowledging only the IPIs that +were generated, we acknowledge *all* the IPIs, by writing +~IPI_DOORBELL_MASK in the ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register. + +This creates a race condition: if a new IPI that isn't part of the +ones read into the temporary "ipimask" variable is fired before we +acknowledge all IPIs, then we will simply loose it. This is causing +scheduling hangs on SMP intensive workloads. + +It is important to mention that this ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS +register has the following behavior: "A CPU write of 0 clears the bits +in this field. A CPU write of 1 has no effect". This is what allows us +to simply write ~ipimask to acknoledge the handled IPIs. + +Notice that the same problem is present in the MSI implementation, but +it will be fixed as a separate patch, so that this IPI fix can be +pushed to older stable versions as appropriate (all the way to 3.8), +while the MSI code only appeared in 3.13. + +Signed-off-by: Lior Amsalem +Signed-off-by: Thomas Petazzoni +Cc: stable@vger.kernel.org +Cc: Thomas Gleixner +--- + drivers/irqchip/irq-armada-370-xp.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/irqchip/irq-armada-370-xp.c ++++ b/drivers/irqchip/irq-armada-370-xp.c +@@ -407,7 +407,7 @@ armada_370_xp_handle_irq(struct pt_regs + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) + & IPI_DOORBELL_MASK; + +- writel(~IPI_DOORBELL_MASK, per_cpu_int_base + ++ writel(~ipimask, per_cpu_int_base + + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); + + /* Handle all pending doorbells */ diff --git a/target/linux/mvebu/patches-3.10/0086-irqchip-armada-370-xp-fix-MSI-race-condition.patch b/target/linux/mvebu/patches-3.10/0086-irqchip-armada-370-xp-fix-MSI-race-condition.patch new file mode 100644 index 0000000000..ebbc532391 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0086-irqchip-armada-370-xp-fix-MSI-race-condition.patch @@ -0,0 +1,44 @@ +From ddda6fa410b6e50ee67d4a628187e76b4a6c9b28 Mon Sep 17 00:00:00 2001 +From: Lior Amsalem +Date: Mon, 25 Nov 2013 17:26:45 +0100 +Subject: [PATCH 086/203] irqchip: armada-370-xp: fix MSI race condition + +In the Armada 370/XP driver, when we receive an IRQ 1, we read the +list of doorbells that caused the interrupt from register +ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS. This gives the list of MSIs that +were generated. However, instead of acknowledging only the MSIs that +were generated, we acknowledge *all* the MSIs, by writing +~MSI_DOORBELL_MASK in the ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register. + +This creates a race condition: if a new MSI that isn't part of the +ones read into the temporary "msimask" variable is fired before we +acknowledge all MSIs, then we will simply loose it. + +It is important to mention that this ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS +register has the following behavior: "A CPU write of 0 clears the bits +in this field. A CPU write of 1 has no effect". This is what allows us +to simply write ~msimask to acknoledge the handled MSIs. + +Notice that the same problem is present in the IPI implementation, but +it is fixed as a separate patch, so that this IPI fix can be pushed to +older stable versions as appropriate (all the way to 3.8), while the +MSI code only appeared in 3.13. + +Signed-off-by: Lior Amsalem +Signed-off-by: Thomas Petazzoni +Cc: Thomas Gleixner +--- + drivers/irqchip/irq-armada-370-xp.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/irqchip/irq-armada-370-xp.c ++++ b/drivers/irqchip/irq-armada-370-xp.c +@@ -381,7 +381,7 @@ armada_370_xp_handle_irq(struct pt_regs + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) + & PCI_MSI_DOORBELL_MASK; + +- writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base + ++ writel(~msimask, per_cpu_int_base + + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); + + for (msinr = PCI_MSI_DOORBELL_START; diff --git a/target/linux/mvebu/patches-3.10/0088-ARM-mvebu-re-enable-PCIe-on-Armada-370-DB.patch b/target/linux/mvebu/patches-3.10/0088-ARM-mvebu-re-enable-PCIe-on-Armada-370-DB.patch new file mode 100644 index 0000000000..3370f669d6 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0088-ARM-mvebu-re-enable-PCIe-on-Armada-370-DB.patch @@ -0,0 +1,60 @@ +From 98e6b600e81f71f8621e316f5d46cf261a9f1da4 Mon Sep 17 00:00:00 2001 +From: Thomas Petazzoni +Date: Mon, 25 Nov 2013 17:26:47 +0100 +Subject: [PATCH 088/203] ARM: mvebu: re-enable PCIe on Armada 370 DB + +Commit 14fd8ed0a7fd19913 ("ARM: mvebu: Relocate Armada 370/XP PCIe +device tree nodes") relocated the PCIe controller DT nodes one level +up in the Device Tree, to reflect a more correct representation of the +hardware introduced by the mvebu-mbus Device Tree binding. + +However, while most of the boards were properly adjusted accordingly, +the Armada 370 DB board was left unchanged, and therefore, PCIe is +seen as not enabled on this board. This patch fixes that by moving the +PCIe controller node one level-up in armada-370-db.dts. + +Signed-off-by: Thomas Petazzoni +Cc: stable@vger.kernel.org +--- + arch/arm/boot/dts/armada-370-db.dts | 28 ++++++++++++++-------------- + 1 file changed, 14 insertions(+), 14 deletions(-) + +--- a/arch/arm/boot/dts/armada-370-db.dts ++++ b/arch/arm/boot/dts/armada-370-db.dts +@@ -99,22 +99,22 @@ + spi-max-frequency = <50000000>; + }; + }; ++ }; + +- pcie-controller { ++ pcie-controller { ++ status = "okay"; ++ /* ++ * The two PCIe units are accessible through ++ * both standard PCIe slots and mini-PCIe ++ * slots on the board. ++ */ ++ pcie@1,0 { ++ /* Port 0, Lane 0 */ ++ status = "okay"; ++ }; ++ pcie@2,0 { ++ /* Port 1, Lane 0 */ + status = "okay"; +- /* +- * The two PCIe units are accessible through +- * both standard PCIe slots and mini-PCIe +- * slots on the board. +- */ +- pcie@1,0 { +- /* Port 0, Lane 0 */ +- status = "okay"; +- }; +- pcie@2,0 { +- /* Port 1, Lane 0 */ +- status = "okay"; +- }; + }; + }; + }; diff --git a/target/linux/mvebu/patches-3.10/0089-ARM-mvebu-fix-gated-clock-documentation.patch b/target/linux/mvebu/patches-3.10/0089-ARM-mvebu-fix-gated-clock-documentation.patch new file mode 100644 index 0000000000..b553e8cb19 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0089-ARM-mvebu-fix-gated-clock-documentation.patch @@ -0,0 +1,43 @@ +From 67f66e13d8a6da710d6df965021d92261083b584 Mon Sep 17 00:00:00 2001 +From: Gregory CLEMENT +Date: Wed, 25 Sep 2013 13:24:18 +0200 +Subject: [PATCH 089/203] ARM: mvebu: fix gated clock documentation + +The gated clock documentation referred only to the Orion SoC whereas +it also applied for the Armada 370/XP SoC. This commit updates the +introduction text and also the list of the compatible strings. + +Signed-off-by: Gregory CLEMENT +Signed-off-by: Jason Cooper +--- + .../devicetree/bindings/clock/mvebu-gated-clock.txt | 14 ++++++++------ + 1 file changed, 8 insertions(+), 6 deletions(-) + +--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt ++++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +@@ -1,10 +1,10 @@ +-* Gated Clock bindings for Marvell Orion SoCs ++* Gated Clock bindings for Marvell EBU SoCs + +-Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save +-some power. The clock consumer should specify the desired clock by having +-the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to +-the corresponding clock gating control bit in HW to ease manual clock lookup +-in datasheet. ++Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be ++gated to save some power. The clock consumer should specify the desired clock ++by having the clock ID in its "clocks" phandle cell. The clock ID is directly ++mapped to the corresponding clock gating control bit in HW to ease manual clock ++lookup in datasheet. + + The following is a list of provided IDs for Armada 370: + ID Clock Peripheral +@@ -94,6 +94,8 @@ ID Clock Peripheral + + Required properties: + - compatible : shall be one of the following: ++ "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating ++ "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating + "marvell,dove-gating-clock" - for Dove SoC clock gating + "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating + - reg : shall be the register address of the Clock Gating Control register diff --git a/target/linux/mvebu/patches-3.10/0090-mtd-add-datasheet-s-ECC-information-to-nand_chip.patch b/target/linux/mvebu/patches-3.10/0090-mtd-add-datasheet-s-ECC-information-to-nand_chip.patch new file mode 100644 index 0000000000..fcc3c929a8 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0090-mtd-add-datasheet-s-ECC-information-to-nand_chip.patch @@ -0,0 +1,64 @@ +From 4aa571afd29f88898ef2fb954effcf53fec3264e Mon Sep 17 00:00:00 2001 +From: Huang Shijie +Date: Fri, 17 May 2013 11:17:25 +0800 +Subject: [PATCH 090/203] mtd: add datasheet's ECC information to nand_chip{} + +1.) Why add the ECC information to the nand_chip{} ? + Each nand chip has its requirement for the ECC correctability, such as + "4bit ECC for each 512Byte" or "40bit ECC for each 1024Byte". + This ECC info is very important to the nand controller, such as gpmi. + + Take the Micron MT29F64G08CBABA for example, its geometry is + 8KiB page size, 744 bytes oob size and it requires 40bit ECC per 1KiB. + If we do not provide the ECC info to the gpmi nand driver, it has to + calculate the ECC correctability itself. The gpmi driver will gets the 56bit + ECC for per 1KiB which is beyond its BCH's 40bit ecc capibility. + The gpmi will quits in this case. But in actually, the gpmi can supports + this nand chip if it can get the right ECC info. + +2.) about the new fields. + The @ecc_strength_ds stands for the ecc bits needed within the @ecc_step_ds. + The two fields should be set from the nand chip's datasheets. + + For example: + "4bit ECC for each 512Byte" could be: + @ecc_strength_ds = 4, @ecc_step_ds = 512. + "40bit ECC for each 1024Byte" could be: + @ecc_strength_ds = 40, @ecc_step_ds = 1024. + +3.) Why do not re-use the @strength and @size in the nand_ecc_ctrl{}? + The @strength and @size in nand_ecc_ctrl{} is used by the nand controller + driver, while the @ecc_strength_ds and @ecc_step_ds are get from the datasheet. + +Signed-off-by: Huang Shijie +Reviewed-and-tested-by: Brian Norris +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + include/linux/mtd/nand.h | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -434,6 +434,12 @@ struct nand_buffers { + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 + * @cellinfo: [INTERN] MLC/multichip data from chip ident ++ * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet. ++ * Minimum amount of bit errors per @ecc_step_ds guaranteed ++ * to be correctable. If unknown, set to zero. ++ * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, ++ * also from the datasheet. It is the recommended ECC step ++ * size, if known; if unknown, set to zero. + * @numchips: [INTERN] number of physical chips + * @chipsize: [INTERN] the size of one chip for multichip arrays + * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 +@@ -510,6 +516,8 @@ struct nand_chip { + unsigned int pagebuf_bitflips; + int subpagesize; + uint8_t cellinfo; ++ uint16_t ecc_strength_ds; ++ uint16_t ecc_step_ds; + int badblockpos; + int badblockbits; + diff --git a/target/linux/mvebu/patches-3.10/0091-mtd-add-data-structures-for-Extended-Parameter-Page.patch b/target/linux/mvebu/patches-3.10/0091-mtd-add-data-structures-for-Extended-Parameter-Page.patch new file mode 100644 index 0000000000..e772d09288 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0091-mtd-add-data-structures-for-Extended-Parameter-Page.patch @@ -0,0 +1,85 @@ +From 50a7db84f71e7c4779596fb5f8efb579a5d29f97 Mon Sep 17 00:00:00 2001 +From: Huang Shijie +Date: Fri, 17 May 2013 11:17:27 +0800 +Subject: [PATCH 091/203] mtd: add data structures for Extended Parameter Page + +Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page +to store the ECC info. + +The onfi spec tells us that if the nand chip's recommended ECC codeword +size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then +read the Extended ECC information that is part of the extended parameter +page to retrieve the ECC requirements for this device. + +This patch adds + [1] the neccessary fields for nand_onfi_params{}, + [2] and adds the onfi_ext_ecc_info{} for Extended ECC information, + [3] adds onfi_ext_section{} for extended sections, + [4] and adds onfi_ext_param_page{} for the Extended Parameter Page. + +Acked-by: Pekon Gupta +Signed-off-by: Huang Shijie +Reviewed-and-tested-by: Brian Norris +[Brian: amended for checkpatch.pl] +Signed-off-by: Brian Norris + +Signed-off-by: David Woodhouse +--- + include/linux/mtd/nand.h | 39 ++++++++++++++++++++++++++++++++++++++- + 1 file changed, 38 insertions(+), 1 deletion(-) + +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -224,7 +224,10 @@ struct nand_onfi_params { + __le16 revision; + __le16 features; + __le16 opt_cmd; +- u8 reserved[22]; ++ u8 reserved0[2]; ++ __le16 ext_param_page_length; /* since ONFI 2.1 */ ++ u8 num_of_param_pages; /* since ONFI 2.1 */ ++ u8 reserved1[17]; + + /* manufacturer information block */ + char manufacturer[12]; +@@ -281,6 +284,40 @@ struct nand_onfi_params { + + #define ONFI_CRC_BASE 0x4F4E + ++/* Extended ECC information Block Definition (since ONFI 2.1) */ ++struct onfi_ext_ecc_info { ++ u8 ecc_bits; ++ u8 codeword_size; ++ __le16 bb_per_lun; ++ __le16 block_endurance; ++ u8 reserved[2]; ++} __packed; ++ ++#define ONFI_SECTION_TYPE_0 0 /* Unused section. */ ++#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */ ++#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */ ++struct onfi_ext_section { ++ u8 type; ++ u8 length; ++} __packed; ++ ++#define ONFI_EXT_SECTION_MAX 8 ++ ++/* Extended Parameter Page Definition (since ONFI 2.1) */ ++struct onfi_ext_param_page { ++ __le16 crc; ++ u8 sig[4]; /* 'E' 'P' 'P' 'S' */ ++ u8 reserved0[10]; ++ struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX]; ++ ++ /* ++ * The actual size of the Extended Parameter Page is in ++ * @ext_param_page_length of nand_onfi_params{}. ++ * The following are the variable length sections. ++ * So we do not add any fields below. Please see the ONFI spec. ++ */ ++} __packed; ++ + /** + * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices + * @lock: protection lock diff --git a/target/linux/mvebu/patches-3.10/0092-mtd-add-a-helper-to-get-the-supported-features-for-O.patch b/target/linux/mvebu/patches-3.10/0092-mtd-add-a-helper-to-get-the-supported-features-for-O.patch new file mode 100644 index 0000000000..7579c16855 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0092-mtd-add-a-helper-to-get-the-supported-features-for-O.patch @@ -0,0 +1,43 @@ +From aeeb6ea6eb18c46f5776dd068989686686cda359 Mon Sep 17 00:00:00 2001 +From: Huang Shijie +Date: Fri, 17 May 2013 11:17:28 +0800 +Subject: [PATCH 092/203] mtd: add a helper to get the supported features for + ONFI nand + +add a helper to get the supported features for ONFI nand. +Also add the neccessary macros. + +Signed-off-by: Huang Shijie +Reviewed-and-tested-by: Brian Norris +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + include/linux/mtd/nand.h | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/include/linux/mtd/nand.h ++++ b/include/linux/mtd/nand.h +@@ -202,6 +202,10 @@ typedef enum { + /* Keep gcc happy */ + struct nand_chip; + ++/* ONFI features */ ++#define ONFI_FEATURE_16_BIT_BUS (1 << 0) ++#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7) ++ + /* ONFI timing mode, used in both asynchronous and synchronous mode */ + #define ONFI_TIMING_MODE_0 (1 << 0) + #define ONFI_TIMING_MODE_1 (1 << 1) +@@ -754,6 +758,12 @@ struct platform_nand_chip *get_platform_ + return chip->priv; + } + ++/* return the supported features. */ ++static inline int onfi_feature(struct nand_chip *chip) ++{ ++ return chip->onfi_version ? le16_to_cpu(chip->onfi_params.features) : 0; ++} ++ + /* return the supported asynchronous timing mode. */ + static inline int onfi_get_async_timing_mode(struct nand_chip *chip) + { diff --git a/target/linux/mvebu/patches-3.10/0093-mtd-get-the-ECC-info-from-the-parameter-page-for-ONF.patch b/target/linux/mvebu/patches-3.10/0093-mtd-get-the-ECC-info-from-the-parameter-page-for-ONF.patch new file mode 100644 index 0000000000..6c70fda3cb --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0093-mtd-get-the-ECC-info-from-the-parameter-page-for-ONF.patch @@ -0,0 +1,31 @@ +From ceef2075f3aa430da137e3629b0280a46d420ccd Mon Sep 17 00:00:00 2001 +From: Huang Shijie +Date: Fri, 17 May 2013 11:17:26 +0800 +Subject: [PATCH 093/203] mtd: get the ECC info from the parameter page for + ONFI nand + +From the ONFI spec, we can just get the ECC info from the @ecc_bits field of +the parameter page. + +Signed-off-by: Huang Shijie +Reviewed-and-tested-by: Brian Norris +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/nand_base.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -2924,6 +2924,11 @@ static int nand_flash_detect_onfi(struct + if (le16_to_cpu(p->features) & 1) + *busw = NAND_BUSWIDTH_16; + ++ if (p->ecc_bits != 0xff) { ++ chip->ecc_strength_ds = p->ecc_bits; ++ chip->ecc_step_ds = 512; ++ } ++ + pr_info("ONFI flash detected\n"); + return 1; + } diff --git a/target/linux/mvebu/patches-3.10/0094-mtd-get-the-ECC-info-from-the-Extended-Parameter-Pag.patch b/target/linux/mvebu/patches-3.10/0094-mtd-get-the-ECC-info-from-the-Extended-Parameter-Pag.patch new file mode 100644 index 0000000000..b3969e1159 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0094-mtd-get-the-ECC-info-from-the-Extended-Parameter-Pag.patch @@ -0,0 +1,131 @@ +From f617846b1e20a2ba59cdd9435715339eaed1e251 Mon Sep 17 00:00:00 2001 +From: Huang Shijie +Date: Wed, 22 May 2013 10:28:27 +0800 +Subject: [PATCH 094/203] mtd: get the ECC info from the Extended Parameter + Page + +Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page +to store the ECC info. + +The onfi spec tells us that if the nand chip's recommended ECC codeword +size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then +read the Extended ECC information that is part of the extended parameter +page to retrieve the ECC requirements for this device. + +This patch implement the reading of the Extended Parameter Page, and parses +the sections for ECC type, and get the ECC info from the ECC section. + +Tested this patch with Micron MT29F64G08CBABAWP. + +Acked-by: Pekon Gupta +Signed-off-by: Huang Shijie +Reviewed-and-tested-by: Brian Norris +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/nand_base.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 87 insertions(+) + +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -2848,6 +2848,78 @@ static u16 onfi_crc16(u16 crc, u8 const + return crc; + } + ++/* Parse the Extended Parameter Page. */ ++static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, ++ struct nand_chip *chip, struct nand_onfi_params *p) ++{ ++ struct onfi_ext_param_page *ep; ++ struct onfi_ext_section *s; ++ struct onfi_ext_ecc_info *ecc; ++ uint8_t *cursor; ++ int ret = -EINVAL; ++ int len; ++ int i; ++ ++ len = le16_to_cpu(p->ext_param_page_length) * 16; ++ ep = kmalloc(len, GFP_KERNEL); ++ if (!ep) { ++ ret = -ENOMEM; ++ goto ext_out; ++ } ++ ++ /* Send our own NAND_CMD_PARAM. */ ++ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); ++ ++ /* Use the Change Read Column command to skip the ONFI param pages. */ ++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, ++ sizeof(*p) * p->num_of_param_pages , -1); ++ ++ /* Read out the Extended Parameter Page. */ ++ chip->read_buf(mtd, (uint8_t *)ep, len); ++ if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2) ++ != le16_to_cpu(ep->crc))) { ++ pr_debug("fail in the CRC.\n"); ++ goto ext_out; ++ } ++ ++ /* ++ * Check the signature. ++ * Do not strictly follow the ONFI spec, maybe changed in future. ++ */ ++ if (strncmp(ep->sig, "EPPS", 4)) { ++ pr_debug("The signature is invalid.\n"); ++ goto ext_out; ++ } ++ ++ /* find the ECC section. */ ++ cursor = (uint8_t *)(ep + 1); ++ for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) { ++ s = ep->sections + i; ++ if (s->type == ONFI_SECTION_TYPE_2) ++ break; ++ cursor += s->length * 16; ++ } ++ if (i == ONFI_EXT_SECTION_MAX) { ++ pr_debug("We can not find the ECC section.\n"); ++ goto ext_out; ++ } ++ ++ /* get the info we want. */ ++ ecc = (struct onfi_ext_ecc_info *)cursor; ++ ++ if (ecc->codeword_size) { ++ chip->ecc_strength_ds = ecc->ecc_bits; ++ chip->ecc_step_ds = 1 << ecc->codeword_size; ++ } ++ ++ pr_info("ONFI extended param page detected.\n"); ++ return 0; ++ ++ext_out: ++ kfree(ep); ++ return ret; ++} ++ + /* + * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise. + */ +@@ -2927,6 +2999,21 @@ static int nand_flash_detect_onfi(struct + if (p->ecc_bits != 0xff) { + chip->ecc_strength_ds = p->ecc_bits; + chip->ecc_step_ds = 512; ++ } else if (chip->onfi_version >= 21 && ++ (onfi_feature(chip) & ONFI_FEATURE_EXT_PARAM_PAGE)) { ++ ++ /* ++ * The nand_flash_detect_ext_param_page() uses the ++ * Change Read Column command which maybe not supported ++ * by the chip->cmdfunc. So try to update the chip->cmdfunc ++ * now. We do not replace user supplied command function. ++ */ ++ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) ++ chip->cmdfunc = nand_command_lp; ++ ++ /* The Extended Parameter Page is supported since ONFI 2.1. */ ++ if (nand_flash_detect_ext_param_page(mtd, chip, p)) ++ pr_info("Failed to detect the extended param page.\n"); + } + + pr_info("ONFI flash detected\n"); diff --git a/target/linux/mvebu/patches-3.10/0095-mtd-nand-fix-memory-leak-in-ONFI-extended-parameter-.patch b/target/linux/mvebu/patches-3.10/0095-mtd-nand-fix-memory-leak-in-ONFI-extended-parameter-.patch new file mode 100644 index 0000000000..5cb74f974a --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0095-mtd-nand-fix-memory-leak-in-ONFI-extended-parameter-.patch @@ -0,0 +1,51 @@ +From 5d15281ca712cb873835e301937f3a8342e88d4b Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Mon, 16 Sep 2013 17:59:20 -0700 +Subject: [PATCH 095/203] mtd: nand: fix memory leak in ONFI extended parameter + page + +This fixes a memory leak in the ONFI support code for detecting the +required ECC levels from this commit: + + commit 6dcbe0cdd83fb5f77be4f44c9e06c535281c375a + Author: Huang Shijie + Date: Wed May 22 10:28:27 2013 +0800 + + mtd: get the ECC info from the Extended Parameter Page + +In the success case, we never freed the 'ep' buffer. + +Also, this fixes an oversight in the same commit where we (harmlessly) +freed the NULL pointer. + +Signed-off-by: Brian Norris +Acked-by: Huang Shijie +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/nand_base.c | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -2862,10 +2862,8 @@ static int nand_flash_detect_ext_param_p + + len = le16_to_cpu(p->ext_param_page_length) * 16; + ep = kmalloc(len, GFP_KERNEL); +- if (!ep) { +- ret = -ENOMEM; +- goto ext_out; +- } ++ if (!ep) ++ return -ENOMEM; + + /* Send our own NAND_CMD_PARAM. */ + chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); +@@ -2913,7 +2911,7 @@ static int nand_flash_detect_ext_param_p + } + + pr_info("ONFI extended param page detected.\n"); +- return 0; ++ ret = 0; + + ext_out: + kfree(ep); diff --git a/target/linux/mvebu/patches-3.10/0096-clk-mvebu-Add-Core-Divider-clock.patch b/target/linux/mvebu/patches-3.10/0096-clk-mvebu-Add-Core-Divider-clock.patch new file mode 100644 index 0000000000..968877cab2 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0096-clk-mvebu-Add-Core-Divider-clock.patch @@ -0,0 +1,273 @@ +From ac8294dfb4085f3193bec27673062e5ad63d770a Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Thu, 26 Sep 2013 16:35:27 -0300 +Subject: [PATCH 096/203] clk: mvebu: Add Core Divider clock + +This commit introduces a new group of clocks present in Armada 370/XP +SoCs (called "Core Divider" clocks) and add a provider for them. +The only clock supported for now is the NAND clock (ndclk), but the +infrastructure to add the rest is already set. + +Reviewed-by: Gregory CLEMENT +Signed-off-by: Ezequiel Garcia +Signed-off-by: Mike Turquette +--- + arch/arm/mach-mvebu/Kconfig | 1 + + drivers/clk/mvebu/Kconfig | 3 + + drivers/clk/mvebu/Makefile | 1 + + drivers/clk/mvebu/clk-corediv.c | 223 ++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 228 insertions(+) + create mode 100644 drivers/clk/mvebu/clk-corediv.c + +--- a/arch/arm/mach-mvebu/Kconfig ++++ b/arch/arm/mach-mvebu/Kconfig +@@ -13,6 +13,7 @@ config ARCH_MVEBU + select MVEBU_CLK_CORE + select MVEBU_CLK_CPU + select MVEBU_CLK_GATING ++ select MVEBU_CLK_COREDIV + select MVEBU_MBUS + select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB +--- a/drivers/clk/mvebu/Kconfig ++++ b/drivers/clk/mvebu/Kconfig +@@ -6,3 +6,6 @@ config MVEBU_CLK_CPU + + config MVEBU_CLK_GATING + bool ++ ++config MVEBU_CLK_COREDIV ++ bool +--- a/drivers/clk/mvebu/Makefile ++++ b/drivers/clk/mvebu/Makefile +@@ -1,3 +1,4 @@ + obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o + obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o + obj-$(CONFIG_MVEBU_CLK_GATING) += clk-gating-ctrl.o ++obj-$(CONFIG_MVEBU_CLK_COREDIV) += clk-corediv.o +--- /dev/null ++++ b/drivers/clk/mvebu/clk-corediv.c +@@ -0,0 +1,223 @@ ++/* ++ * MVEBU Core divider clock ++ * ++ * Copyright (C) 2013 Marvell ++ * ++ * Ezequiel Garcia ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define CORE_CLK_DIV_RATIO_MASK 0xff ++#define CORE_CLK_DIV_RATIO_RELOAD BIT(8) ++#define CORE_CLK_DIV_ENABLE_OFFSET 24 ++#define CORE_CLK_DIV_RATIO_OFFSET 0x8 ++ ++struct clk_corediv_desc { ++ unsigned int mask; ++ unsigned int offset; ++ unsigned int fieldbit; ++}; ++ ++struct clk_corediv { ++ struct clk_hw hw; ++ void __iomem *reg; ++ struct clk_corediv_desc desc; ++ spinlock_t lock; ++}; ++ ++static struct clk_onecell_data clk_data; ++ ++static const struct clk_corediv_desc mvebu_corediv_desc[] __initconst = { ++ { .mask = 0x3f, .offset = 8, .fieldbit = 1 }, /* NAND clock */ ++}; ++ ++#define to_corediv_clk(p) container_of(p, struct clk_corediv, hw) ++ ++static int clk_corediv_is_enabled(struct clk_hw *hwclk) ++{ ++ struct clk_corediv *corediv = to_corediv_clk(hwclk); ++ struct clk_corediv_desc *desc = &corediv->desc; ++ u32 enable_mask = BIT(desc->fieldbit) << CORE_CLK_DIV_ENABLE_OFFSET; ++ ++ return !!(readl(corediv->reg) & enable_mask); ++} ++ ++static int clk_corediv_enable(struct clk_hw *hwclk) ++{ ++ struct clk_corediv *corediv = to_corediv_clk(hwclk); ++ struct clk_corediv_desc *desc = &corediv->desc; ++ unsigned long flags = 0; ++ u32 reg; ++ ++ spin_lock_irqsave(&corediv->lock, flags); ++ ++ reg = readl(corediv->reg); ++ reg |= (BIT(desc->fieldbit) << CORE_CLK_DIV_ENABLE_OFFSET); ++ writel(reg, corediv->reg); ++ ++ spin_unlock_irqrestore(&corediv->lock, flags); ++ ++ return 0; ++} ++ ++static void clk_corediv_disable(struct clk_hw *hwclk) ++{ ++ struct clk_corediv *corediv = to_corediv_clk(hwclk); ++ struct clk_corediv_desc *desc = &corediv->desc; ++ unsigned long flags = 0; ++ u32 reg; ++ ++ spin_lock_irqsave(&corediv->lock, flags); ++ ++ reg = readl(corediv->reg); ++ reg &= ~(BIT(desc->fieldbit) << CORE_CLK_DIV_ENABLE_OFFSET); ++ writel(reg, corediv->reg); ++ ++ spin_unlock_irqrestore(&corediv->lock, flags); ++} ++ ++static unsigned long clk_corediv_recalc_rate(struct clk_hw *hwclk, ++ unsigned long parent_rate) ++{ ++ struct clk_corediv *corediv = to_corediv_clk(hwclk); ++ struct clk_corediv_desc *desc = &corediv->desc; ++ u32 reg, div; ++ ++ reg = readl(corediv->reg + CORE_CLK_DIV_RATIO_OFFSET); ++ div = (reg >> desc->offset) & desc->mask; ++ return parent_rate / div; ++} ++ ++static long clk_corediv_round_rate(struct clk_hw *hwclk, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ /* Valid ratio are 1:4, 1:5, 1:6 and 1:8 */ ++ u32 div; ++ ++ div = *parent_rate / rate; ++ if (div < 4) ++ div = 4; ++ else if (div > 6) ++ div = 8; ++ ++ return *parent_rate / div; ++} ++ ++static int clk_corediv_set_rate(struct clk_hw *hwclk, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct clk_corediv *corediv = to_corediv_clk(hwclk); ++ struct clk_corediv_desc *desc = &corediv->desc; ++ unsigned long flags = 0; ++ u32 reg, div; ++ ++ div = parent_rate / rate; ++ ++ spin_lock_irqsave(&corediv->lock, flags); ++ ++ /* Write new divider to the divider ratio register */ ++ reg = readl(corediv->reg + CORE_CLK_DIV_RATIO_OFFSET); ++ reg &= ~(desc->mask << desc->offset); ++ reg |= (div & desc->mask) << desc->offset; ++ writel(reg, corediv->reg + CORE_CLK_DIV_RATIO_OFFSET); ++ ++ /* Set reload-force for this clock */ ++ reg = readl(corediv->reg) | BIT(desc->fieldbit); ++ writel(reg, corediv->reg); ++ ++ /* Now trigger the clock update */ ++ reg = readl(corediv->reg) | CORE_CLK_DIV_RATIO_RELOAD; ++ writel(reg, corediv->reg); ++ ++ /* ++ * Wait for clocks to settle down, and then clear all the ++ * ratios request and the reload request. ++ */ ++ udelay(1000); ++ reg &= ~(CORE_CLK_DIV_RATIO_MASK | CORE_CLK_DIV_RATIO_RELOAD); ++ writel(reg, corediv->reg); ++ udelay(1000); ++ ++ spin_unlock_irqrestore(&corediv->lock, flags); ++ ++ return 0; ++} ++ ++static const struct clk_ops corediv_ops = { ++ .enable = clk_corediv_enable, ++ .disable = clk_corediv_disable, ++ .is_enabled = clk_corediv_is_enabled, ++ .recalc_rate = clk_corediv_recalc_rate, ++ .round_rate = clk_corediv_round_rate, ++ .set_rate = clk_corediv_set_rate, ++}; ++ ++static void __init mvebu_corediv_clk_init(struct device_node *node) ++{ ++ struct clk_init_data init; ++ struct clk_corediv *corediv; ++ struct clk **clks; ++ void __iomem *base; ++ const char *parent_name; ++ const char *clk_name; ++ int i; ++ ++ base = of_iomap(node, 0); ++ if (WARN_ON(!base)) ++ return; ++ ++ parent_name = of_clk_get_parent_name(node, 0); ++ ++ clk_data.clk_num = ARRAY_SIZE(mvebu_corediv_desc); ++ ++ /* clks holds the clock array */ ++ clks = kcalloc(clk_data.clk_num, sizeof(struct clk *), ++ GFP_KERNEL); ++ if (WARN_ON(!clks)) ++ goto err_unmap; ++ /* corediv holds the clock specific array */ ++ corediv = kcalloc(clk_data.clk_num, sizeof(struct clk_corediv), ++ GFP_KERNEL); ++ if (WARN_ON(!corediv)) ++ goto err_free_clks; ++ ++ spin_lock_init(&corediv->lock); ++ ++ for (i = 0; i < clk_data.clk_num; i++) { ++ of_property_read_string_index(node, "clock-output-names", ++ i, &clk_name); ++ init.num_parents = 1; ++ init.parent_names = &parent_name; ++ init.name = clk_name; ++ init.ops = &corediv_ops; ++ init.flags = 0; ++ ++ corediv[i].desc = mvebu_corediv_desc[i]; ++ corediv[i].reg = base; ++ corediv[i].hw.init = &init; ++ ++ clks[i] = clk_register(NULL, &corediv[i].hw); ++ WARN_ON(IS_ERR(clks[i])); ++ } ++ ++ clk_data.clks = clks; ++ of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data); ++ return; ++ ++err_free_clks: ++ kfree(clks); ++err_unmap: ++ iounmap(base); ++} ++CLK_OF_DECLARE(mvebu_corediv_clk, "marvell,armada-370-corediv-clock", ++ mvebu_corediv_clk_init); diff --git a/target/linux/mvebu/patches-3.10/0097-ARM-mvebu-Add-a-2-GHz-fixed-clock-Armada-370-XP.patch b/target/linux/mvebu/patches-3.10/0097-ARM-mvebu-Add-a-2-GHz-fixed-clock-Armada-370-XP.patch new file mode 100644 index 0000000000..861dcb9d0b --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0097-ARM-mvebu-Add-a-2-GHz-fixed-clock-Armada-370-XP.patch @@ -0,0 +1,32 @@ +From 455ad812cb2ec97339f780e2a79169620f1e7485 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Fri, 18 Oct 2013 20:02:30 -0300 +Subject: [PATCH 097/203] ARM: mvebu: Add a 2 GHz fixed-clock Armada 370/XP + +Armada 370/XP SoCs have a 2 GHz fixed PLL that is used to feed +other clocks. This commit adds a DT representation of this clock +through a fixed-clock compatible node. + +Reviewed-by: Gregory CLEMENT +Signed-off-by: Ezequiel Garcia +Signed-off-by: Jason Cooper +--- + arch/arm/boot/dts/armada-370-xp.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -251,4 +251,13 @@ + + }; + }; ++ ++ clocks { ++ /* 2 GHz fixed main PLL */ ++ mainpll: mainpll { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <2000000000>; ++ }; ++ }; + }; diff --git a/target/linux/mvebu/patches-3.10/0098-ARM-mvebu-Add-the-core-divider-clock-to-Armada-370-X.patch b/target/linux/mvebu/patches-3.10/0098-ARM-mvebu-Add-the-core-divider-clock-to-Armada-370-X.patch new file mode 100644 index 0000000000..c25e5de456 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0098-ARM-mvebu-Add-the-core-divider-clock-to-Armada-370-X.patch @@ -0,0 +1,33 @@ +From 408b807592d9cdbc1a69b119f4a862b2ab1e4d87 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Fri, 18 Oct 2013 20:02:31 -0300 +Subject: [PATCH 098/203] ARM: mvebu: Add the core-divider clock to Armada + 370/XP + +The Armada 370/XP SoC has a clock provider called "Core Divider", +that is derived from a fixed 2 GHz PLL clock. + +Reviewed-by: Gregory CLEMENT +Signed-off-by: Ezequiel Garcia +Signed-off-by: Jason Cooper +--- + arch/arm/boot/dts/armada-370-xp.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -134,6 +134,14 @@ + status = "disabled"; + }; + ++ coredivclk: corediv-clock@18740 { ++ compatible = "marvell,armada-370-corediv-clock"; ++ reg = <0x18740 0xc>; ++ #clock-cells = <1>; ++ clocks = <&mainpll>; ++ clock-output-names = "nand"; ++ }; ++ + timer@20300 { + compatible = "marvell,armada-370-xp-timer"; + reg = <0x20300 0x30>, <0x21040 0x30>; diff --git a/target/linux/mvebu/patches-3.10/0099-ARM-mvebu-Add-support-for-NAND-controller-in-Armada-.patch b/target/linux/mvebu/patches-3.10/0099-ARM-mvebu-Add-support-for-NAND-controller-in-Armada-.patch new file mode 100644 index 0000000000..36bf58bc9b --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0099-ARM-mvebu-Add-support-for-NAND-controller-in-Armada-.patch @@ -0,0 +1,34 @@ +From 64356fe97302ad842d9871a5a4411d8b41127f59 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Thu, 7 Nov 2013 12:17:33 -0300 +Subject: [PATCH 099/203] ARM: mvebu: Add support for NAND controller in Armada + 370/XP + +The Armada 370 and Armada XP SoC have a NAND controller (aka NFCv2). +This commit adds support for it in Armada 370 and Armada XP SoC +common devicetree. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Jason Cooper +--- + arch/arm/boot/dts/armada-370-xp.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm/boot/dts/armada-370-xp.dtsi ++++ b/arch/arm/boot/dts/armada-370-xp.dtsi +@@ -257,6 +257,15 @@ + status = "disabled"; + }; + ++ nand@d0000 { ++ compatible = "marvell,armada370-nand"; ++ reg = <0xd0000 0x54>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ interrupts = <113>; ++ clocks = <&coredivclk 0>; ++ status = "disabled"; ++ }; + }; + }; + diff --git a/target/linux/mvebu/patches-3.10/0100-ARM-mvebu-Enable-NAND-controller-in-Armada-XP-GP-boa.patch b/target/linux/mvebu/patches-3.10/0100-ARM-mvebu-Enable-NAND-controller-in-Armada-XP-GP-boa.patch new file mode 100644 index 0000000000..1b56424982 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0100-ARM-mvebu-Enable-NAND-controller-in-Armada-XP-GP-boa.patch @@ -0,0 +1,36 @@ +From 9226a0bb330bb83df9a465ba418efd3277cd00d3 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Thu, 7 Nov 2013 12:17:34 -0300 +Subject: [PATCH 100/203] ARM: mvebu: Enable NAND controller in Armada XP GP + board + +The Armada XP GP board has a NAND flash, so enable it in the devicetree. + +In order to skip the driver's custom device detection and use only ONFI +detection, the "marvell,keep-config" parameter is used. +This is needed because we haven't support for setting the timings +parameters yet and must rely in bootloader's. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Jason Cooper +--- + arch/arm/boot/dts/armada-xp-gp.dts | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/armada-xp-gp.dts ++++ b/arch/arm/boot/dts/armada-xp-gp.dts +@@ -175,6 +175,14 @@ + spi-max-frequency = <108000000>; + }; + }; ++ ++ nand@d0000 { ++ status = "okay"; ++ num-cs = <1>; ++ marvell,nand-keep-config; ++ marvell,nand-enable-arbiter; ++ nand-on-flash-bbt; ++ }; + }; + }; + }; diff --git a/target/linux/mvebu/patches-3.10/0101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch b/target/linux/mvebu/patches-3.10/0101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch new file mode 100644 index 0000000000..4ff71f0fb2 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch @@ -0,0 +1,60 @@ +From 271ef48cf11b86ab666582051fed3bdb13681e64 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 17 Apr 2013 13:38:09 -0300 +Subject: [PATCH 101/203] mtd: nand: pxa3xx: Use devm_kzalloc + +Replace regular kzalloc with managed devm_kzalloc +which simplifies the error path. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 14 ++++---------- + 1 file changed, 4 insertions(+), 10 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1035,12 +1035,10 @@ static int alloc_nand_resource(struct pl + int ret, irq, cs; + + pdata = pdev->dev.platform_data; +- info = kzalloc(sizeof(*info) + (sizeof(*mtd) + +- sizeof(*host)) * pdata->num_cs, GFP_KERNEL); +- if (!info) { +- dev_err(&pdev->dev, "failed to allocate memory\n"); ++ info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) + ++ sizeof(*host)) * pdata->num_cs, GFP_KERNEL); ++ if (!info) + return -ENOMEM; +- } + + info->pdev = pdev; + for (cs = 0; cs < pdata->num_cs; cs++) { +@@ -1072,8 +1070,7 @@ static int alloc_nand_resource(struct pl + info->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "failed to get nand clock\n"); +- ret = PTR_ERR(info->clk); +- goto fail_free_mtd; ++ return PTR_ERR(info->clk); + } + clk_enable(info->clk); + +@@ -1165,8 +1162,6 @@ fail_free_res: + fail_put_clk: + clk_disable(info->clk); + clk_put(info->clk); +-fail_free_mtd: +- kfree(info); + return ret; + } + +@@ -1202,7 +1197,6 @@ static int pxa3xx_nand_remove(struct pla + + for (cs = 0; cs < pdata->num_cs; cs++) + nand_release(info->host[cs]->mtd); +- kfree(info); + return 0; + } + diff --git a/target/linux/mvebu/patches-3.10/0102-mtd-nand-pxa3xx-Use-devm_ioremap_resource.patch b/target/linux/mvebu/patches-3.10/0102-mtd-nand-pxa3xx-Use-devm_ioremap_resource.patch new file mode 100644 index 0000000000..eec80792d2 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0102-mtd-nand-pxa3xx-Use-devm_ioremap_resource.patch @@ -0,0 +1,82 @@ +From 5c461327aca8975276d2480ddf02b6c7f0a29548 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 17 Apr 2013 13:38:10 -0300 +Subject: [PATCH 102/203] mtd: nand: pxa3xx: Use devm_ioremap_resource + +Using the new devm_ioremap_resource() we can greatly +simplify resource handling. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 31 ++++--------------------------- + 1 file changed, 4 insertions(+), 27 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1108,30 +1108,16 @@ static int alloc_nand_resource(struct pl + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (r == NULL) { +- dev_err(&pdev->dev, "no IO memory resource defined\n"); +- ret = -ENODEV; ++ info->mmio_base = devm_ioremap_resource(&pdev->dev, r); ++ if (IS_ERR(info->mmio_base)) { ++ ret = PTR_ERR(info->mmio_base); + goto fail_put_clk; + } +- +- r = request_mem_region(r->start, resource_size(r), pdev->name); +- if (r == NULL) { +- dev_err(&pdev->dev, "failed to request memory resource\n"); +- ret = -EBUSY; +- goto fail_put_clk; +- } +- +- info->mmio_base = ioremap(r->start, resource_size(r)); +- if (info->mmio_base == NULL) { +- dev_err(&pdev->dev, "ioremap() failed\n"); +- ret = -ENODEV; +- goto fail_free_res; +- } + info->mmio_phys = r->start; + + ret = pxa3xx_nand_init_buff(info); + if (ret) +- goto fail_free_io; ++ goto fail_put_clk; + + /* initialize all interrupts to be disabled */ + disable_int(info, NDSR_MASK); +@@ -1155,10 +1141,6 @@ fail_free_buf: + info->data_buff, info->data_buff_phys); + } else + kfree(info->data_buff); +-fail_free_io: +- iounmap(info->mmio_base); +-fail_free_res: +- release_mem_region(r->start, resource_size(r)); + fail_put_clk: + clk_disable(info->clk); + clk_put(info->clk); +@@ -1169,7 +1151,6 @@ static int pxa3xx_nand_remove(struct pla + { + struct pxa3xx_nand_info *info = platform_get_drvdata(pdev); + struct pxa3xx_nand_platform_data *pdata; +- struct resource *r; + int irq, cs; + + if (!info) +@@ -1188,10 +1169,6 @@ static int pxa3xx_nand_remove(struct pla + } else + kfree(info->data_buff); + +- iounmap(info->mmio_base); +- r = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- release_mem_region(r->start, resource_size(r)); +- + clk_disable(info->clk); + clk_put(info->clk); + diff --git a/target/linux/mvebu/patches-3.10/0103-mtd-nand-pxa3xx-Use-devm_clk_get.patch b/target/linux/mvebu/patches-3.10/0103-mtd-nand-pxa3xx-Use-devm_clk_get.patch new file mode 100644 index 0000000000..8f9692a44e --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0103-mtd-nand-pxa3xx-Use-devm_clk_get.patch @@ -0,0 +1,87 @@ +From 4ff9eea8b6841bb8be7becba9713a0ce7c82da9d Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 17 Apr 2013 13:38:11 -0300 +Subject: [PATCH 103/203] mtd: nand: pxa3xx: Use devm_clk_get + +Replacing clk_get by managed devm_clk_get, the error path +can be greatly simplified. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1067,7 +1067,7 @@ static int alloc_nand_resource(struct pl + + spin_lock_init(&chip->controller->lock); + init_waitqueue_head(&chip->controller->wq); +- info->clk = clk_get(&pdev->dev, NULL); ++ info->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "failed to get nand clock\n"); + return PTR_ERR(info->clk); +@@ -1087,7 +1087,7 @@ static int alloc_nand_resource(struct pl + if (r == NULL) { + dev_err(&pdev->dev, "no resource defined for data DMA\n"); + ret = -ENXIO; +- goto fail_put_clk; ++ goto fail_disable_clk; + } + info->drcmr_dat = r->start; + +@@ -1095,7 +1095,7 @@ static int alloc_nand_resource(struct pl + if (r == NULL) { + dev_err(&pdev->dev, "no resource defined for command DMA\n"); + ret = -ENXIO; +- goto fail_put_clk; ++ goto fail_disable_clk; + } + info->drcmr_cmd = r->start; + } +@@ -1104,20 +1104,20 @@ static int alloc_nand_resource(struct pl + if (irq < 0) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + ret = -ENXIO; +- goto fail_put_clk; ++ goto fail_disable_clk; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + info->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(info->mmio_base)) { + ret = PTR_ERR(info->mmio_base); +- goto fail_put_clk; ++ goto fail_disable_clk; + } + info->mmio_phys = r->start; + + ret = pxa3xx_nand_init_buff(info); + if (ret) +- goto fail_put_clk; ++ goto fail_disable_clk; + + /* initialize all interrupts to be disabled */ + disable_int(info, NDSR_MASK); +@@ -1141,9 +1141,8 @@ fail_free_buf: + info->data_buff, info->data_buff_phys); + } else + kfree(info->data_buff); +-fail_put_clk: ++fail_disable_clk: + clk_disable(info->clk); +- clk_put(info->clk); + return ret; + } + +@@ -1170,7 +1169,6 @@ static int pxa3xx_nand_remove(struct pla + kfree(info->data_buff); + + clk_disable(info->clk); +- clk_put(info->clk); + + for (cs = 0; cs < pdata->num_cs; cs++) + nand_release(info->host[cs]->mtd); diff --git a/target/linux/mvebu/patches-3.10/0104-mtd-nand-pxa3xx-Use-clk_prepare_enable-and-clk_disab.patch b/target/linux/mvebu/patches-3.10/0104-mtd-nand-pxa3xx-Use-clk_prepare_enable-and-clk_disab.patch new file mode 100644 index 0000000000..80d3588751 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0104-mtd-nand-pxa3xx-Use-clk_prepare_enable-and-clk_disab.patch @@ -0,0 +1,45 @@ +From e9274ba8dd0c93f12c0fd5896e11f754aa700baf Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 17 Apr 2013 13:38:12 -0300 +Subject: [PATCH 104/203] mtd: nand: pxa3xx: Use clk_prepare_enable and + clk_disable_unprepare + +This patch converts the module to use clk_prepare_enable and +clk_disable_unprepare variants as required by common clock framework. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1072,7 +1072,7 @@ static int alloc_nand_resource(struct pl + dev_err(&pdev->dev, "failed to get nand clock\n"); + return PTR_ERR(info->clk); + } +- clk_enable(info->clk); ++ clk_prepare_enable(info->clk); + + /* + * This is a dirty hack to make this driver work from devicetree +@@ -1142,7 +1142,7 @@ fail_free_buf: + } else + kfree(info->data_buff); + fail_disable_clk: +- clk_disable(info->clk); ++ clk_disable_unprepare(info->clk); + return ret; + } + +@@ -1168,7 +1168,7 @@ static int pxa3xx_nand_remove(struct pla + } else + kfree(info->data_buff); + +- clk_disable(info->clk); ++ clk_disable_unprepare(info->clk); + + for (cs = 0; cs < pdata->num_cs; cs++) + nand_release(info->host[cs]->mtd); diff --git a/target/linux/mvebu/patches-3.10/0105-mtd-nand-pxa3xx-Check-for-clk_prepare_enable-return-.patch b/target/linux/mvebu/patches-3.10/0105-mtd-nand-pxa3xx-Check-for-clk_prepare_enable-return-.patch new file mode 100644 index 0000000000..f075d6e87a --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0105-mtd-nand-pxa3xx-Check-for-clk_prepare_enable-return-.patch @@ -0,0 +1,29 @@ +From 7e8fbc673938278ec7165b99b76227d7cc2ab012 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 17 Apr 2013 13:38:13 -0300 +Subject: [PATCH 105/203] mtd: nand: pxa3xx: Check for clk_prepare_enable() + return value + +clk_prepare_enable() can fail due to unknown reason. +Add a check for this and return the error code if it fails. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1072,7 +1072,9 @@ static int alloc_nand_resource(struct pl + dev_err(&pdev->dev, "failed to get nand clock\n"); + return PTR_ERR(info->clk); + } +- clk_prepare_enable(info->clk); ++ ret = clk_prepare_enable(info->clk); ++ if (ret < 0) ++ return ret; + + /* + * This is a dirty hack to make this driver work from devicetree diff --git a/target/linux/mvebu/patches-3.10/0106-mtd-nand-pxa3xx-Move-buffer-release-code-to-its-own-.patch b/target/linux/mvebu/patches-3.10/0106-mtd-nand-pxa3xx-Move-buffer-release-code-to-its-own-.patch new file mode 100644 index 0000000000..b199fcf833 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0106-mtd-nand-pxa3xx-Move-buffer-release-code-to-its-own-.patch @@ -0,0 +1,66 @@ +From 49ff5bd7d4d51a8eb05796f130e9a1a96d18f522 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Wed, 17 Apr 2013 13:38:14 -0300 +Subject: [PATCH 106/203] mtd: nand: pxa3xx: Move buffer release code to its + own function + +Create a function to release the buffer and the dma channel, thus undoing +what pxa3xx_nand_init_buff() did. This commit makes the code more readable +and will allow to handle non-DMA capable platforms easier. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 26 ++++++++++++++------------ + 1 file changed, 14 insertions(+), 12 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -912,6 +912,18 @@ static int pxa3xx_nand_init_buff(struct + return 0; + } + ++static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) ++{ ++ struct platform_device *pdev = info->pdev; ++ if (use_dma) { ++ pxa_free_dma(info->data_dma_ch); ++ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, ++ info->data_buff, info->data_buff_phys); ++ } else { ++ kfree(info->data_buff); ++ } ++} ++ + static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) + { + struct mtd_info *mtd; +@@ -1137,12 +1149,7 @@ static int alloc_nand_resource(struct pl + + fail_free_buf: + free_irq(irq, info); +- if (use_dma) { +- pxa_free_dma(info->data_dma_ch); +- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, +- info->data_buff, info->data_buff_phys); +- } else +- kfree(info->data_buff); ++ pxa3xx_nand_free_buff(info); + fail_disable_clk: + clk_disable_unprepare(info->clk); + return ret; +@@ -1163,12 +1170,7 @@ static int pxa3xx_nand_remove(struct pla + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + free_irq(irq, info); +- if (use_dma) { +- pxa_free_dma(info->data_dma_ch); +- dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE, +- info->data_buff, info->data_buff_phys); +- } else +- kfree(info->data_buff); ++ pxa3xx_nand_free_buff(info); + + clk_disable_unprepare(info->clk); + diff --git a/target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-info-use_dma-properly.patch b/target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-info-use_dma-properly.patch new file mode 100644 index 0000000000..388b709de2 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-info-use_dma-properly.patch @@ -0,0 +1,46 @@ +From c16f0b44984bc623621d26df22823b50f13f65d8 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 14 May 2013 08:15:21 -0300 +Subject: [PATCH 107/203] mtd: nand: pxa3xx: Set info->use_dma properly + +Currently, the variable info->use_dma is never set and always +zero-valued which means the driver never does DMA transfers. +We fix this by simply setting info->use_dma to the module parameter, +also named 'use_dma'. Note that the module parameter has the same name, +but different semantics. + +This fixes a regression introduced by the below commit +which removed the info->use_dma variable set. + + commit 4eb2da8994042d68e84e31138788429a102da2ea + Author: Lei Wen + Date: Mon Feb 28 10:32:13 2011 +0800 + + mtd: pxa3xx_nand: unify prepare command + +Before the above commit, the driver had use_dma=1 on all NAND commands +except on CMD_STATUS. This behavior is long lost and we are not +recovering in this patch, either. + +This was spotted and verified by human inspection. + +Signed-off-by: Ezequiel Garcia +Tested-by: Nikita Kiryanov +Acked-by: Igor Grinberg +Reviewed-by: Haojian Zhuang +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -506,6 +506,7 @@ static int prepare_command_pool(struct p + info->buf_count = 0; + info->oob_size = 0; + info->use_ecc = 0; ++ info->use_dma = (use_dma) ? 1 : 0; + info->is_ready = 0; + info->retcode = ERR_NONE; + if (info->cs != 0) diff --git a/target/linux/mvebu/patches-3.10/0108-mtd-nand-pxa3xx-Use-of_machine_is_compatible.patch b/target/linux/mvebu/patches-3.10/0108-mtd-nand-pxa3xx-Use-of_machine_is_compatible.patch new file mode 100644 index 0000000000..76a0030566 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0108-mtd-nand-pxa3xx-Use-of_machine_is_compatible.patch @@ -0,0 +1,29 @@ +From baef6bdc8a3e9cb30ab254fd23eb655d592a19df Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 14 May 2013 08:15:22 -0300 +Subject: [PATCH 108/203] mtd: nand: pxa3xx: Use of_machine_is_compatible() + +This patch replaces cpu_is_pxa3xx() with of_machine_is_compatible() +which allows to build this driver for other platforms than ARCH_PXA. + +Signed-off-by: Ezequiel Garcia +Tested-by: Nikita Kiryanov +Acked-by: Igor Grinberg +Reviewed-by: Haojian Zhuang +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1094,7 +1094,7 @@ static int alloc_nand_resource(struct pl + * bindings. It can be removed once we have a prober DMA controller + * framework for DT. + */ +- if (pdev->dev.of_node && cpu_is_pxa3xx()) { ++ if (pdev->dev.of_node && of_machine_is_compatible("marvell,pxa3xx")) { + info->drcmr_dat = 97; + info->drcmr_cmd = 99; + } else { diff --git a/target/linux/mvebu/patches-3.10/0109-mtd-nand-pxa3xx-Fix-MODULE_DEVICE_TABLE-declaration.patch b/target/linux/mvebu/patches-3.10/0109-mtd-nand-pxa3xx-Fix-MODULE_DEVICE_TABLE-declaration.patch new file mode 100644 index 0000000000..c8f9a04c48 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0109-mtd-nand-pxa3xx-Fix-MODULE_DEVICE_TABLE-declaration.patch @@ -0,0 +1,30 @@ +From 3bda9dc1472596d094f020ab7231466d54b6fe00 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 14 May 2013 08:15:23 -0300 +Subject: [PATCH 109/203] mtd: nand: pxa3xx: Fix MODULE_DEVICE_TABLE + declaration + +This module's device table is incorrectly declared using +i2c_pxa_dt_ids, instead of pxa3xx_nand_dt_ids. + +Signed-off-by: Ezequiel Garcia +Tested-by: Nikita Kiryanov +Acked-by: Igor Grinberg +Reviewed-by: Haojian Zhuang +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1185,7 +1185,7 @@ static struct of_device_id pxa3xx_nand_d + { .compatible = "marvell,pxa3xx-nand" }, + {} + }; +-MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); ++MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); + + static int pxa3xx_nand_probe_dt(struct platform_device *pdev) + { diff --git a/target/linux/mvebu/patches-3.10/0110-mtd-nand-pxa3xx-Add-address-support-for-READID-comma.patch b/target/linux/mvebu/patches-3.10/0110-mtd-nand-pxa3xx-Add-address-support-for-READID-comma.patch new file mode 100644 index 0000000000..583b95cea9 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0110-mtd-nand-pxa3xx-Add-address-support-for-READID-comma.patch @@ -0,0 +1,31 @@ +From 82dad325809637899313315c3103985df94c90a5 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 14 May 2013 08:15:24 -0300 +Subject: [PATCH 110/203] mtd: nand: pxa3xx: Add address support for READID + command + +This allows to support READID ONFI command which sends 0x20 +as address together with the 0x90 READID command. + +This is required to detect ONFI compliant devices. + +Signed-off-by: Ezequiel Garcia +Tested-by: Nikita Kiryanov +Acked-by: Igor Grinberg +Reviewed-by: Haojian Zhuang +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -596,6 +596,7 @@ static int prepare_command_pool(struct p + info->ndcb0 |= NDCB0_CMD_TYPE(3) + | NDCB0_ADDR_CYC(1) + | cmd; ++ info->ndcb1 = (column & 0xFF); + + info->data_size = 8; + break; diff --git a/target/linux/mvebu/patches-3.10/0111-mtd-nand-pxa3xx-Add-support-for-Read-parameter-page-.patch b/target/linux/mvebu/patches-3.10/0111-mtd-nand-pxa3xx-Add-support-for-Read-parameter-page-.patch new file mode 100644 index 0000000000..101f16af25 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0111-mtd-nand-pxa3xx-Add-support-for-Read-parameter-page-.patch @@ -0,0 +1,37 @@ +From 9d6e063c1fb2cb10e6e0c3883ca3d1944dadcfc4 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Tue, 14 May 2013 08:15:25 -0300 +Subject: [PATCH 111/203] mtd: nand: pxa3xx: Add support for Read parameter + page command + +This command is required to identify ONFI-compliant devices. + +Signed-off-by: Ezequiel Garcia +Tested-by: Nikita Kiryanov +Acked-by: Igor Grinberg +Reviewed-by: Haojian Zhuang +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -590,6 +590,16 @@ static int prepare_command_pool(struct p + | addr_cycle; + break; + ++ case NAND_CMD_PARAM: ++ cmd = NAND_CMD_PARAM; ++ info->buf_count = 256; ++ info->ndcb0 |= NDCB0_CMD_TYPE(0) ++ | NDCB0_ADDR_CYC(1) ++ | cmd; ++ info->ndcb1 = (column & 0xFF); ++ info->data_size = 256; ++ break; ++ + case NAND_CMD_READID: + cmd = host->cmdset->read_id; + info->buf_count = host->read_id_bytes; diff --git a/target/linux/mvebu/patches-3.10/0112-mtd-nand-pxa3xx_nand-remove-unnecessary-platform_set.patch b/target/linux/mvebu/patches-3.10/0112-mtd-nand-pxa3xx_nand-remove-unnecessary-platform_set.patch new file mode 100644 index 0000000000..9ccec45bf6 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0112-mtd-nand-pxa3xx_nand-remove-unnecessary-platform_set.patch @@ -0,0 +1,28 @@ +From 03ab29791d222be44a7e2f5716f8a1cdbcf76ceb Mon Sep 17 00:00:00 2001 +From: Jingoo Han +Date: Tue, 7 May 2013 15:44:14 +0900 +Subject: [PATCH 112/203] mtd: nand: pxa3xx_nand: remove unnecessary + platform_set_drvdata() + +The driver core clears the driver data to NULL after device_release +or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d +(device-core: Ensure drvdata = NULL when no driver is bound). +Thus, it is not needed to manually clear the device driver data to NULL. + +Signed-off-by: Jingoo Han +Signed-off-by: Artem Bityutskiy +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1177,7 +1177,6 @@ static int pxa3xx_nand_remove(struct pla + return 0; + + pdata = pdev->dev.platform_data; +- platform_set_drvdata(pdev, NULL); + + irq = platform_get_irq(pdev, 0); + if (irq >= 0) diff --git a/target/linux/mvebu/patches-3.10/0113-mtd-nand-use-dev_get_platdata.patch b/target/linux/mvebu/patches-3.10/0113-mtd-nand-use-dev_get_platdata.patch new file mode 100644 index 0000000000..a77ab9f923 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0113-mtd-nand-use-dev_get_platdata.patch @@ -0,0 +1,80 @@ +From f37031e030eb05ba579c82b9e0424d2608c1ad67 Mon Sep 17 00:00:00 2001 +From: Jingoo Han +Date: Tue, 30 Jul 2013 17:18:33 +0900 +Subject: [PATCH 113/203] mtd: nand: use dev_get_platdata() + +Use the wrapper function for retrieving the platform data instead of +accessing dev->platform_data directly. + +Signed-off-by: Jingoo Han +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -815,7 +815,7 @@ static int pxa3xx_nand_config_flash(stru + const struct pxa3xx_nand_flash *f) + { + struct platform_device *pdev = info->pdev; +- struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data; ++ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct pxa3xx_nand_host *host = info->host[info->cs]; + uint32_t ndcr = 0x0; /* enable all interrupts */ + +@@ -958,7 +958,7 @@ static int pxa3xx_nand_scan(struct mtd_i + struct pxa3xx_nand_host *host = mtd->priv; + struct pxa3xx_nand_info *info = host->info_data; + struct platform_device *pdev = info->pdev; +- struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data; ++ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL; + const struct pxa3xx_nand_flash *f = NULL; + struct nand_chip *chip = mtd->priv; +@@ -1058,7 +1058,7 @@ static int alloc_nand_resource(struct pl + struct resource *r; + int ret, irq, cs; + +- pdata = pdev->dev.platform_data; ++ pdata = dev_get_platdata(&pdev->dev); + info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) + + sizeof(*host)) * pdata->num_cs, GFP_KERNEL); + if (!info) +@@ -1176,7 +1176,7 @@ static int pxa3xx_nand_remove(struct pla + if (!info) + return 0; + +- pdata = pdev->dev.platform_data; ++ pdata = dev_get_platdata(&pdev->dev); + + irq = platform_get_irq(pdev, 0); + if (irq >= 0) +@@ -1239,7 +1239,7 @@ static int pxa3xx_nand_probe(struct plat + if (ret) + return ret; + +- pdata = pdev->dev.platform_data; ++ pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -ENODEV; +@@ -1286,7 +1286,7 @@ static int pxa3xx_nand_suspend(struct pl + struct mtd_info *mtd; + int cs; + +- pdata = pdev->dev.platform_data; ++ pdata = dev_get_platdata(&pdev->dev); + if (info->state) { + dev_err(&pdev->dev, "driver busy, state = %d\n", info->state); + return -EAGAIN; +@@ -1307,7 +1307,7 @@ static int pxa3xx_nand_resume(struct pla + struct mtd_info *mtd; + int cs; + +- pdata = pdev->dev.platform_data; ++ pdata = dev_get_platdata(&pdev->dev); + /* We don't want to handle interrupt without calling mtd routine */ + disable_int(info, NDCR_INT_MASK); + diff --git a/target/linux/mvebu/patches-3.10/0114-mtd-nand-pxa3xx-Introduce-marvell-armada370-nand-com.patch b/target/linux/mvebu/patches-3.10/0114-mtd-nand-pxa3xx-Introduce-marvell-armada370-nand-com.patch new file mode 100644 index 0000000000..b18e61fbca --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0114-mtd-nand-pxa3xx-Introduce-marvell-armada370-nand-com.patch @@ -0,0 +1,88 @@ +From 259e46e4327a9937761fd3f7bc07e208b1fa50e6 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Sat, 10 Aug 2013 16:34:52 -0300 +Subject: [PATCH 114/203] mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' + compatible string + +This driver supports NFCv1 (as found in PXA SoC) and NFCv2 (as found in +Armada 370/XP SoC). As both controller has a few differences, a way of +distinguishing between the two is needed. + +This commit introduces a new compatible string 'marvell,armada370-nand' +and assigns a compatible data of type enum pxa3xx_nand_variant to allow +such distinction. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Cc: devicetree@vger.kernel.org +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 31 ++++++++++++++++++++++++++++++- + 1 file changed, 30 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -123,6 +123,11 @@ enum { + STATE_READY, + }; + ++enum pxa3xx_nand_variant { ++ PXA3XX_NAND_VARIANT_PXA, ++ PXA3XX_NAND_VARIANT_ARMADA370, ++}; ++ + struct pxa3xx_nand_host { + struct nand_chip chip; + struct pxa3xx_nand_cmdset *cmdset; +@@ -171,6 +176,12 @@ struct pxa3xx_nand_info { + struct pxa3xx_nand_host *host[NUM_CHIP_SELECT]; + unsigned int state; + ++ /* ++ * This driver supports NFCv1 (as found in PXA SoC) ++ * and NFCv2 (as found in Armada 370/XP SoC). ++ */ ++ enum pxa3xx_nand_variant variant; ++ + int cs; + int use_ecc; /* use HW ECC ? */ + int use_dma; /* use DMA ? */ +@@ -1192,11 +1203,28 @@ static int pxa3xx_nand_remove(struct pla + + #ifdef CONFIG_OF + static struct of_device_id pxa3xx_nand_dt_ids[] = { +- { .compatible = "marvell,pxa3xx-nand" }, ++ { ++ .compatible = "marvell,pxa3xx-nand", ++ .data = (void *)PXA3XX_NAND_VARIANT_PXA, ++ }, ++ { ++ .compatible = "marvell,armada370-nand", ++ .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, ++ }, + {} + }; + MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); + ++static enum pxa3xx_nand_variant ++pxa3xx_nand_get_variant(struct platform_device *pdev) ++{ ++ const struct of_device_id *of_id = ++ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev); ++ if (!of_id) ++ return PXA3XX_NAND_VARIANT_PXA; ++ return (enum pxa3xx_nand_variant)of_id->data; ++} ++ + static int pxa3xx_nand_probe_dt(struct platform_device *pdev) + { + struct pxa3xx_nand_platform_data *pdata; +@@ -1252,6 +1280,7 @@ static int pxa3xx_nand_probe(struct plat + } + + info = platform_get_drvdata(pdev); ++ info->variant = pxa3xx_nand_get_variant(pdev); + probe_success = 0; + for (cs = 0; cs < pdata->num_cs; cs++) { + info->cs = cs; diff --git a/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch b/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch new file mode 100644 index 0000000000..e31cd2f9ab --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch @@ -0,0 +1,39 @@ +From d6af8f27223a244d74ab44842bdec707c97cfe55 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:48 -0300 +Subject: [PATCH 115/203] mtd: nand: pxa3xx: Handle ECC and DMA enable/disable + properly + +When ECC is not selected, the ECC enable bit must be cleared +in the NAND control register. Same applies to DMA. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 13 +++++++++++-- + 1 file changed, 11 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -314,8 +314,17 @@ static void pxa3xx_nand_start(struct pxa + uint32_t ndcr; + + ndcr = host->reg_ndcr; +- ndcr |= info->use_ecc ? NDCR_ECC_EN : 0; +- ndcr |= info->use_dma ? NDCR_DMA_EN : 0; ++ ++ if (info->use_ecc) ++ ndcr |= NDCR_ECC_EN; ++ else ++ ndcr &= ~NDCR_ECC_EN; ++ ++ if (info->use_dma) ++ ndcr |= NDCR_DMA_EN; ++ else ++ ndcr &= ~NDCR_DMA_EN; ++ + ndcr |= NDCR_ND_RUN; + + /* clear status bits and run */ diff --git a/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch b/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch new file mode 100644 index 0000000000..eca13b4b0d --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch @@ -0,0 +1,49 @@ +From be5f1d59341e48dbe0730253417c52bf79c6c3a7 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:49 -0300 +Subject: [PATCH 116/203] mtd: nand: pxa3xx: Allow to set/clear the 'spare + enable' field + +Some commands (such as the ONFI parameter page read) need to +clear the 'spare enable' bit. This commit allows to set/clear +depending on the prepared command, instead of having it always +set. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -185,6 +185,7 @@ struct pxa3xx_nand_info { + int cs; + int use_ecc; /* use HW ECC ? */ + int use_dma; /* use DMA ? */ ++ int use_spare; /* use spare ? */ + int is_ready; + + unsigned int page_size; /* page size of attached chip */ +@@ -325,6 +326,11 @@ static void pxa3xx_nand_start(struct pxa + else + ndcr &= ~NDCR_DMA_EN; + ++ if (info->use_spare) ++ ndcr |= NDCR_SPARE_EN; ++ else ++ ndcr &= ~NDCR_SPARE_EN; ++ + ndcr |= NDCR_ND_RUN; + + /* clear status bits and run */ +@@ -526,6 +532,7 @@ static int prepare_command_pool(struct p + info->buf_count = 0; + info->oob_size = 0; + info->use_ecc = 0; ++ info->use_spare = 1; + info->use_dma = (use_dma) ? 1 : 0; + info->is_ready = 0; + info->retcode = ERR_NONE; diff --git a/target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Support-command-buffer-3.patch b/target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Support-command-buffer-3.patch new file mode 100644 index 0000000000..f9d2d31aff --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Support-command-buffer-3.patch @@ -0,0 +1,59 @@ +From 6bbda039fe5e9d1b3c04f4f0dd8479a2c102d28e Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:50 -0300 +Subject: [PATCH 117/203] mtd: nand: pxa3xx: Support command buffer #3 + +Some newer controllers support a fourth command buffer. This additional +command buffer allows to set an arbitrary length count, using the +NDCB3.NDLENCNT field, to perform non-standard length operations +such as the ONFI parameter page read. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -197,6 +197,7 @@ struct pxa3xx_nand_info { + uint32_t ndcb0; + uint32_t ndcb1; + uint32_t ndcb2; ++ uint32_t ndcb3; + }; + + static bool use_dma = 1; +@@ -493,9 +494,22 @@ static irqreturn_t pxa3xx_nand_irq(int i + nand_writel(info, NDSR, NDSR_WRCMDREQ); + status &= ~NDSR_WRCMDREQ; + info->state = STATE_CMD_HANDLE; ++ ++ /* ++ * Command buffer registers NDCB{0-2} (and optionally NDCB3) ++ * must be loaded by writing directly either 12 or 16 ++ * bytes directly to NDCB0, four bytes at a time. ++ * ++ * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored ++ * but each NDCBx register can be read. ++ */ + nand_writel(info, NDCB0, info->ndcb0); + nand_writel(info, NDCB0, info->ndcb1); + nand_writel(info, NDCB0, info->ndcb2); ++ ++ /* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */ ++ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) ++ nand_writel(info, NDCB0, info->ndcb3); + } + + /* clear NDSR to let the controller exit the IRQ */ +@@ -554,6 +568,7 @@ static int prepare_command_pool(struct p + default: + info->ndcb1 = 0; + info->ndcb2 = 0; ++ info->ndcb3 = 0; + break; + } + diff --git a/target/linux/mvebu/patches-3.10/0118-mtd-nand-pxa3xx-Use-length-override-in-ONFI-paramate.patch b/target/linux/mvebu/patches-3.10/0118-mtd-nand-pxa3xx-Use-length-override-in-ONFI-paramate.patch new file mode 100644 index 0000000000..8694af8afd --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0118-mtd-nand-pxa3xx-Use-length-override-in-ONFI-paramate.patch @@ -0,0 +1,52 @@ +From adbba4cf6ea15c2acb53e3fd9fc03c6b37f1f1fc Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:51 -0300 +Subject: [PATCH 118/203] mtd: nand: pxa3xx: Use 'length override' in ONFI + paramater page read + +The ONFI command 'parameter page read' needs a non-standard length. +Therefore, we enable the 'length override' field in NDCB0 and set +a non-zero 'length count' in NDCB3. + +Additionally, the 'spare enable' bit must be disabled for any command +that sets a non-zero 'length count' in NDCB3. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -80,6 +80,7 @@ + #define NDSR_RDDREQ (0x1 << 1) + #define NDSR_WRCMDREQ (0x1) + ++#define NDCB0_LEN_OVRD (0x1 << 28) + #define NDCB0_ST_ROW_EN (0x1 << 26) + #define NDCB0_AUTO_RS (0x1 << 25) + #define NDCB0_CSEL (0x1 << 24) +@@ -562,6 +563,9 @@ static int prepare_command_pool(struct p + case NAND_CMD_READOOB: + pxa3xx_set_datasize(info); + break; ++ case NAND_CMD_PARAM: ++ info->use_spare = 0; ++ break; + case NAND_CMD_SEQIN: + exec_cmd = 0; + break; +@@ -637,8 +641,10 @@ static int prepare_command_pool(struct p + info->buf_count = 256; + info->ndcb0 |= NDCB0_CMD_TYPE(0) + | NDCB0_ADDR_CYC(1) ++ | NDCB0_LEN_OVRD + | cmd; + info->ndcb1 = (column & 0xFF); ++ info->ndcb3 = 256; + info->data_size = 256; + break; + diff --git a/target/linux/mvebu/patches-3.10/0119-mtd-nand-pxa3xx-Add-a-local-loop-variable.patch b/target/linux/mvebu/patches-3.10/0119-mtd-nand-pxa3xx-Add-a-local-loop-variable.patch new file mode 100644 index 0000000000..f25a3611f4 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0119-mtd-nand-pxa3xx-Add-a-local-loop-variable.patch @@ -0,0 +1,37 @@ +From 9f27a3899318ef0c4c147ed2d84cfbfb339d9bb6 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:52 -0300 +Subject: [PATCH 119/203] mtd: nand: pxa3xx: Add a local loop variable + +This is just a cosmetic change, to make the code more readable. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1320,8 +1320,9 @@ static int pxa3xx_nand_probe(struct plat + info->variant = pxa3xx_nand_get_variant(pdev); + probe_success = 0; + for (cs = 0; cs < pdata->num_cs; cs++) { ++ struct mtd_info *mtd = info->host[cs]->mtd; + info->cs = cs; +- ret = pxa3xx_nand_scan(info->host[cs]->mtd); ++ ret = pxa3xx_nand_scan(mtd); + if (ret) { + dev_warn(&pdev->dev, "failed to scan nand at cs %d\n", + cs); +@@ -1329,7 +1330,7 @@ static int pxa3xx_nand_probe(struct plat + } + + ppdata.of_node = pdev->dev.of_node; +- ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, ++ ret = mtd_device_parse_register(mtd, NULL, + &ppdata, pdata->parts[cs], + pdata->nr_parts[cs]); + if (!ret) diff --git a/target/linux/mvebu/patches-3.10/0120-mtd-nand-pxa3xx-Remove-hardcoded-mtd-name.patch b/target/linux/mvebu/patches-3.10/0120-mtd-nand-pxa3xx-Remove-hardcoded-mtd-name.patch new file mode 100644 index 0000000000..e9791e8c00 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0120-mtd-nand-pxa3xx-Remove-hardcoded-mtd-name.patch @@ -0,0 +1,45 @@ +From 96d8ffc47c7ee9689b8b48ac9588e0b00fa9bd44 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:53 -0300 +Subject: [PATCH 120/203] mtd: nand: pxa3xx: Remove hardcoded mtd name + +There's no advantage in using a hardcoded name for the mtd device. +Instead use the provided by the platform_device. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 6 ++---- + 1 file changed, 2 insertions(+), 4 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -244,8 +244,6 @@ static struct pxa3xx_nand_flash builtin_ + /* Define a default flash type setting serve as flash detecting only */ + #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0]) + +-const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL}; +- + #define NDTR0_tCH(c) (min((c), 7) << 19) + #define NDTR0_tCS(c) (min((c), 7) << 16) + #define NDTR0_tWH(c) (min((c), 7) << 11) +@@ -1091,8 +1089,6 @@ KEEP_CONFIG: + host->row_addr_cycles = 3; + else + host->row_addr_cycles = 2; +- +- mtd->name = mtd_names[0]; + return nand_scan_tail(mtd); + } + +@@ -1321,6 +1317,8 @@ static int pxa3xx_nand_probe(struct plat + probe_success = 0; + for (cs = 0; cs < pdata->num_cs; cs++) { + struct mtd_info *mtd = info->host[cs]->mtd; ++ ++ mtd->name = pdev->name; + info->cs = cs; + ret = pxa3xx_nand_scan(mtd); + if (ret) { diff --git a/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch b/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch new file mode 100644 index 0000000000..4d5761172a --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch @@ -0,0 +1,200 @@ +From 45d36da3f284cd424b0ac2060cfccc17f9979552 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:54 -0300 +Subject: [PATCH 121/203] mtd: nand: pxa3xx: Remove unneeded internal cmdset + +Use the defined macros for NAND command instead of using a constant +internal structure. This commit is only a cleanup, there's no +functionality modification. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 63 ++++++++------------------- + include/linux/platform_data/mtd-nand-pxa3xx.h | 13 ------ + 2 files changed, 17 insertions(+), 59 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -131,7 +131,6 @@ enum pxa3xx_nand_variant { + + struct pxa3xx_nand_host { + struct nand_chip chip; +- struct pxa3xx_nand_cmdset *cmdset; + struct mtd_info *mtd; + void *info_data; + +@@ -205,23 +204,6 @@ static bool use_dma = 1; + module_param(use_dma, bool, 0444); + MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); + +-/* +- * Default NAND flash controller configuration setup by the +- * bootloader. This configuration is used only when pdata->keep_config is set +- */ +-static struct pxa3xx_nand_cmdset default_cmdset = { +- .read1 = 0x3000, +- .read2 = 0x0050, +- .program = 0x1080, +- .read_status = 0x0070, +- .read_id = 0x0090, +- .erase = 0xD060, +- .reset = 0x00FF, +- .lock = 0x002A, +- .unlock = 0x2423, +- .lock_status = 0x007A, +-}; +- + static struct pxa3xx_nand_timing timing[] = { + { 40, 80, 60, 100, 80, 100, 90000, 400, 40, }, + { 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, +@@ -530,7 +512,6 @@ static inline int is_buf_blank(uint8_t * + static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, + uint16_t column, int page_addr) + { +- uint16_t cmd; + int addr_cycle, exec_cmd; + struct pxa3xx_nand_host *host; + struct mtd_info *mtd; +@@ -580,21 +561,17 @@ static int prepare_command_pool(struct p + switch (command) { + case NAND_CMD_READOOB: + case NAND_CMD_READ0: +- cmd = host->cmdset->read1; ++ info->buf_start = column; ++ info->ndcb0 |= NDCB0_CMD_TYPE(0) ++ | addr_cycle ++ | NAND_CMD_READ0; ++ + if (command == NAND_CMD_READOOB) +- info->buf_start = mtd->writesize + column; +- else +- info->buf_start = column; ++ info->buf_start += mtd->writesize; + +- if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) +- info->ndcb0 |= NDCB0_CMD_TYPE(0) +- | addr_cycle +- | (cmd & NDCB0_CMD1_MASK); +- else +- info->ndcb0 |= NDCB0_CMD_TYPE(0) +- | NDCB0_DBC +- | addr_cycle +- | cmd; ++ /* Second command setting for large pages */ ++ if (host->page_size >= PAGE_CHUNK_SIZE) ++ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); + + case NAND_CMD_SEQIN: + /* small page addr setting */ +@@ -625,62 +602,58 @@ static int prepare_command_pool(struct p + break; + } + +- cmd = host->cmdset->program; + info->ndcb0 |= NDCB0_CMD_TYPE(0x1) + | NDCB0_AUTO_RS + | NDCB0_ST_ROW_EN + | NDCB0_DBC +- | cmd ++ | (NAND_CMD_PAGEPROG << 8) ++ | NAND_CMD_SEQIN + | addr_cycle; + break; + + case NAND_CMD_PARAM: +- cmd = NAND_CMD_PARAM; + info->buf_count = 256; + info->ndcb0 |= NDCB0_CMD_TYPE(0) + | NDCB0_ADDR_CYC(1) + | NDCB0_LEN_OVRD +- | cmd; ++ | command; + info->ndcb1 = (column & 0xFF); + info->ndcb3 = 256; + info->data_size = 256; + break; + + case NAND_CMD_READID: +- cmd = host->cmdset->read_id; + info->buf_count = host->read_id_bytes; + info->ndcb0 |= NDCB0_CMD_TYPE(3) + | NDCB0_ADDR_CYC(1) +- | cmd; ++ | command; + info->ndcb1 = (column & 0xFF); + + info->data_size = 8; + break; + case NAND_CMD_STATUS: +- cmd = host->cmdset->read_status; + info->buf_count = 1; + info->ndcb0 |= NDCB0_CMD_TYPE(4) + | NDCB0_ADDR_CYC(1) +- | cmd; ++ | command; + + info->data_size = 8; + break; + + case NAND_CMD_ERASE1: +- cmd = host->cmdset->erase; + info->ndcb0 |= NDCB0_CMD_TYPE(2) + | NDCB0_AUTO_RS + | NDCB0_ADDR_CYC(3) + | NDCB0_DBC +- | cmd; ++ | (NAND_CMD_ERASE2 << 8) ++ | NAND_CMD_ERASE1; + info->ndcb1 = page_addr; + info->ndcb2 = 0; + + break; + case NAND_CMD_RESET: +- cmd = host->cmdset->reset; + info->ndcb0 |= NDCB0_CMD_TYPE(5) +- | cmd; ++ | command; + + break; + +@@ -876,7 +849,6 @@ static int pxa3xx_nand_config_flash(stru + } + + /* calculate flash information */ +- host->cmdset = &default_cmdset; + host->page_size = f->page_size; + host->read_id_bytes = (f->page_size == 2048) ? 4 : 2; + +@@ -922,7 +894,6 @@ static int pxa3xx_nand_detect_config(str + } + + host->reg_ndcr = ndcr & ~NDCR_INT_MASK; +- host->cmdset = &default_cmdset; + + host->ndtr0cs0 = nand_readl(info, NDTR0CS0); + host->ndtr1cs0 = nand_readl(info, NDTR1CS0); +--- a/include/linux/platform_data/mtd-nand-pxa3xx.h ++++ b/include/linux/platform_data/mtd-nand-pxa3xx.h +@@ -16,19 +16,6 @@ struct pxa3xx_nand_timing { + unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ + }; + +-struct pxa3xx_nand_cmdset { +- uint16_t read1; +- uint16_t read2; +- uint16_t program; +- uint16_t read_status; +- uint16_t read_id; +- uint16_t erase; +- uint16_t reset; +- uint16_t lock; +- uint16_t unlock; +- uint16_t lock_status; +-}; +- + struct pxa3xx_nand_flash { + char *name; + uint32_t chip_id; diff --git a/target/linux/mvebu/patches-3.10/0122-mtd-nand-pxa3xx-Move-cached-registers-to-info-struct.patch b/target/linux/mvebu/patches-3.10/0122-mtd-nand-pxa3xx-Move-cached-registers-to-info-struct.patch new file mode 100644 index 0000000000..a5109f0ce7 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0122-mtd-nand-pxa3xx-Move-cached-registers-to-info-struct.patch @@ -0,0 +1,127 @@ +From 5c5367d7f9ad835b3b8a2dddfbe90e4c6e669084 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:55 -0300 +Subject: [PATCH 122/203] mtd: nand: pxa3xx: Move cached registers to info + structure + +This registers are not per-chip (aka host) but controller-wide, +so it's better to store them in the global 'info' structure. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 36 +++++++++++++++++------------------- + 1 file changed, 17 insertions(+), 19 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -144,10 +144,6 @@ struct pxa3xx_nand_host { + unsigned int row_addr_cycles; + size_t read_id_bytes; + +- /* cached register value */ +- uint32_t reg_ndcr; +- uint32_t ndtr0cs0; +- uint32_t ndtr1cs0; + }; + + struct pxa3xx_nand_info { +@@ -193,6 +189,11 @@ struct pxa3xx_nand_info { + unsigned int oob_size; + int retcode; + ++ /* cached register value */ ++ uint32_t reg_ndcr; ++ uint32_t ndtr0cs0; ++ uint32_t ndtr1cs0; ++ + /* generated NDCBx register values */ + uint32_t ndcb0; + uint32_t ndcb1; +@@ -258,8 +259,8 @@ static void pxa3xx_nand_set_timing(struc + NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) | + NDTR1_tAR(ns2cycle(t->tAR, nand_clk)); + +- host->ndtr0cs0 = ndtr0; +- host->ndtr1cs0 = ndtr1; ++ info->ndtr0cs0 = ndtr0; ++ info->ndtr1cs0 = ndtr1; + nand_writel(info, NDTR0CS0, ndtr0); + nand_writel(info, NDTR1CS0, ndtr1); + } +@@ -267,7 +268,7 @@ static void pxa3xx_nand_set_timing(struc + static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) + { + struct pxa3xx_nand_host *host = info->host[info->cs]; +- int oob_enable = host->reg_ndcr & NDCR_SPARE_EN; ++ int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; + + info->data_size = host->page_size; + if (!oob_enable) { +@@ -293,10 +294,9 @@ static void pxa3xx_set_datasize(struct p + */ + static void pxa3xx_nand_start(struct pxa3xx_nand_info *info) + { +- struct pxa3xx_nand_host *host = info->host[info->cs]; + uint32_t ndcr; + +- ndcr = host->reg_ndcr; ++ ndcr = info->reg_ndcr; + + if (info->use_ecc) + ndcr |= NDCR_ECC_EN; +@@ -683,7 +683,7 @@ static void pxa3xx_nand_cmdfunc(struct m + * "byte" address into a "word" address appropriate + * for indexing a word-oriented device + */ +- if (host->reg_ndcr & NDCR_DWIDTH_M) ++ if (info->reg_ndcr & NDCR_DWIDTH_M) + column /= 2; + + /* +@@ -693,8 +693,8 @@ static void pxa3xx_nand_cmdfunc(struct m + */ + if (info->cs != host->cs) { + info->cs = host->cs; +- nand_writel(info, NDTR0CS0, host->ndtr0cs0); +- nand_writel(info, NDTR1CS0, host->ndtr1cs0); ++ nand_writel(info, NDTR0CS0, info->ndtr0cs0); ++ nand_writel(info, NDTR1CS0, info->ndtr1cs0); + } + + info->state = STATE_PREPARED; +@@ -870,7 +870,7 @@ static int pxa3xx_nand_config_flash(stru + ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes); + ndcr |= NDCR_SPARE_EN; /* enable spare by default */ + +- host->reg_ndcr = ndcr; ++ info->reg_ndcr = ndcr; + + pxa3xx_nand_set_timing(host, f->timing); + return 0; +@@ -893,11 +893,9 @@ static int pxa3xx_nand_detect_config(str + host->read_id_bytes = 2; + } + +- host->reg_ndcr = ndcr & ~NDCR_INT_MASK; +- +- host->ndtr0cs0 = nand_readl(info, NDTR0CS0); +- host->ndtr1cs0 = nand_readl(info, NDTR1CS0); +- ++ info->reg_ndcr = ndcr & ~NDCR_INT_MASK; ++ info->ndtr0cs0 = nand_readl(info, NDTR0CS0); ++ info->ndtr1cs0 = nand_readl(info, NDTR1CS0); + return 0; + } + +@@ -1044,7 +1042,7 @@ KEEP_CONFIG: + chip->ecc.size = host->page_size; + chip->ecc.strength = 1; + +- if (host->reg_ndcr & NDCR_DWIDTH_M) ++ if (info->reg_ndcr & NDCR_DWIDTH_M) + chip->options |= NAND_BUSWIDTH_16; + + if (nand_scan_ident(mtd, 1, def)) diff --git a/target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch b/target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch new file mode 100644 index 0000000000..87bec0cd10 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch @@ -0,0 +1,106 @@ +From 085ced2b9e159dbeae029e338958b8c8ae9073b9 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:56 -0300 +Subject: [PATCH 123/203] mtd: nand: pxa3xx: Make dma code dependent on dma + capable platforms + +This patch adds a macro ARCH_HAS_DMA to compile-out arch specific +dma code, namely pxa_request_dma() and pxa_free_dma(). These symbols +are available only in pxa, which makes impossible to build the driver in +other platforms than ARCH_PXA. + +In order to handle non-dma capable platforms, we implement a fallbacks that +allocate buffers as if 'use_dma=false', putting the dma related code +under the ARCH_HAS_DMA conditional. + +Please note that the correct way to handle this is to migrate the +dma code to use of the mmp_pdma dmaengine driver. However, currently +this is not possible because the two dmaengine drivers can't work together. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 34 ++++++++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -25,7 +25,14 @@ + #include + #include + ++#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) ++#define ARCH_HAS_DMA ++#endif ++ ++#ifdef ARCH_HAS_DMA + #include ++#endif ++ + #include + + #define CHIP_DELAY_TIMEOUT (2 * HZ/10) +@@ -381,6 +388,7 @@ static void handle_data_pio(struct pxa3x + } + } + ++#ifdef ARCH_HAS_DMA + static void start_data_dma(struct pxa3xx_nand_info *info) + { + struct pxa_dma_desc *desc = info->data_desc; +@@ -427,6 +435,10 @@ static void pxa3xx_nand_data_dma_irq(int + enable_int(info, NDCR_INT_MASK); + nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ); + } ++#else ++static void start_data_dma(struct pxa3xx_nand_info *info) ++{} ++#endif + + static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) + { +@@ -905,6 +917,7 @@ static int pxa3xx_nand_detect_config(str + */ + #define MAX_BUFF_SIZE PAGE_SIZE + ++#ifdef ARCH_HAS_DMA + static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) + { + struct platform_device *pdev = info->pdev; +@@ -950,6 +963,20 @@ static void pxa3xx_nand_free_buff(struct + kfree(info->data_buff); + } + } ++#else ++static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) ++{ ++ info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); ++ if (info->data_buff == NULL) ++ return -ENOMEM; ++ return 0; ++} ++ ++static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) ++{ ++ kfree(info->data_buff); ++} ++#endif + + static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) + { +@@ -1265,6 +1292,13 @@ static int pxa3xx_nand_probe(struct plat + struct pxa3xx_nand_info *info; + int ret, cs, probe_success; + ++#ifndef ARCH_HAS_DMA ++ if (use_dma) { ++ use_dma = 0; ++ dev_warn(&pdev->dev, ++ "This platform can't do DMA on this device\n"); ++ } ++#endif + ret = pxa3xx_nand_probe_dt(pdev); + if (ret) + return ret; diff --git a/target/linux/mvebu/patches-3.10/0124-mtd-nand-pxa3xx-Add-__maybe_unused-keyword-to-enable.patch b/target/linux/mvebu/patches-3.10/0124-mtd-nand-pxa3xx-Add-__maybe_unused-keyword-to-enable.patch new file mode 100644 index 0000000000..d985f9ae62 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0124-mtd-nand-pxa3xx-Add-__maybe_unused-keyword-to-enable.patch @@ -0,0 +1,33 @@ +From d6d4e28e52f3cd70f60d03405181994a2763532b Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:57 -0300 +Subject: [PATCH 124/203] mtd: nand: pxa3xx: Add __maybe_unused keyword to + enable_int() + +Now that we have added ARCH_HAS_DMA conditional the function +enable_int() may be unused. Declare it as __maybe_unused, +in order to remove the following warning, when the function is not used: + +drivers/mtd/nand//pxa3xx_nand.c:343:24: warning: 'enable_int' defined +but not used [-Wunused-function] + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -348,7 +348,8 @@ static void pxa3xx_nand_stop(struct pxa3 + nand_writel(info, NDSR, NDSR_MASK); + } + +-static void enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) ++static void __maybe_unused ++enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) + { + uint32_t ndcr; + diff --git a/target/linux/mvebu/patches-3.10/0125-mtd-nand-pxa3xx-Allow-devices-with-no-dma-resources.patch b/target/linux/mvebu/patches-3.10/0125-mtd-nand-pxa3xx-Allow-devices-with-no-dma-resources.patch new file mode 100644 index 0000000000..3c57e87492 --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0125-mtd-nand-pxa3xx-Allow-devices-with-no-dma-resources.patch @@ -0,0 +1,78 @@ +From c26369f5b9929e1187ccf716d6d1678196ec0b4f Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:58 -0300 +Subject: [PATCH 125/203] mtd: nand: pxa3xx: Allow devices with no dma + resources + +When use_dma=0 there's no point in requesting resources for dma, +since they won't be used anyway. Therefore we remove that requirement, +therefore allowing devices without dma to pass the driver probe. + +Signed-off-by: Ezequiel Garcia +Tested-by: Daniel Mack +Signed-off-by: Brian Norris +Signed-off-by: David Woodhouse +--- + drivers/mtd/nand/pxa3xx_nand.c | 51 +++++++++++++++++++++++------------------- + 1 file changed, 28 insertions(+), 23 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1141,30 +1141,35 @@ static int alloc_nand_resource(struct pl + if (ret < 0) + return ret; + +- /* +- * This is a dirty hack to make this driver work from devicetree +- * bindings. It can be removed once we have a prober DMA controller +- * framework for DT. +- */ +- if (pdev->dev.of_node && of_machine_is_compatible("marvell,pxa3xx")) { +- info->drcmr_dat = 97; +- info->drcmr_cmd = 99; +- } else { +- r = platform_get_resource(pdev, IORESOURCE_DMA, 0); +- if (r == NULL) { +- dev_err(&pdev->dev, "no resource defined for data DMA\n"); +- ret = -ENXIO; +- goto fail_disable_clk; +- } +- info->drcmr_dat = r->start; ++ if (use_dma) { ++ /* ++ * This is a dirty hack to make this driver work from ++ * devicetree bindings. It can be removed once we have ++ * a prober DMA controller framework for DT. ++ */ ++ if (pdev->dev.of_node && ++ of_machine_is_compatible("marvell,pxa3xx")) { ++ info->drcmr_dat = 97; ++ info->drcmr_cmd = 99; ++ } else { ++ r = platform_get_resource(pdev, IORESOURCE_DMA, 0); ++ if (r == NULL) { ++ dev_err(&pdev->dev, ++ "no resource defined for data DMA\n"); ++ ret = -ENXIO; ++ goto fail_disable_clk; ++ } ++ info->drcmr_dat = r->start; + +- r = platform_get_resource(pdev, IORESOURCE_DMA, 1); +- if (r == NULL) { +- dev_err(&pdev->dev, "no resource defined for command DMA\n"); +- ret = -ENXIO; +- goto fail_disable_clk; ++ r = platform_get_resource(pdev, IORESOURCE_DMA, 1); ++ if (r == NULL) { ++ dev_err(&pdev->dev, ++ "no resource defined for cmd DMA\n"); ++ ret = -ENXIO; ++ goto fail_disable_clk; ++ } ++ info->drcmr_cmd = r->start; + } +- info->drcmr_cmd = r->start; + } + + irq = platform_get_irq(pdev, 0); diff --git a/target/linux/mvebu/patches-3.10/0126-mtd-nand-pxa3xx-Remove-unneeded-ifdef-CONFIG_OF.patch b/target/linux/mvebu/patches-3.10/0126-mtd-nand-pxa3xx-Remove-unneeded-ifdef-CONFIG_OF.patch new file mode 100644 index 0000000000..4a3cc54f9b --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0126-mtd-nand-pxa3xx-Remove-unneeded-ifdef-CONFIG_OF.patch @@ -0,0 +1,39 @@ +From 1fea4cca22fcb1045a0c1ad42df793e3ea29b5bf Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Mon, 12 Aug 2013 14:14:46 -0300 +Subject: [PATCH 126/203] mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF + +There's no need to enclose this code within idef CONFIG_OF, +because the OF framework provides no-op stubs if CONFIG_OF=n. + +Cc: devicetree@vger.kernel.org +Signed-off-by: Ezequiel Garcia +Signed-off-by: Brian Norris +Signed-off-by: Olof Johansson +--- + drivers/mtd/nand/pxa3xx_nand.c | 7 ------- + 1 file changed, 7 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1236,7 +1236,6 @@ static int pxa3xx_nand_remove(struct pla + return 0; + } + +-#ifdef CONFIG_OF + static struct of_device_id pxa3xx_nand_dt_ids[] = { + { + .compatible = "marvell,pxa3xx-nand", +@@ -1284,12 +1283,6 @@ static int pxa3xx_nand_probe_dt(struct p + + return 0; + } +-#else +-static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev) +-{ +- return 0; +-} +-#endif + + static int pxa3xx_nand_probe(struct platform_device *pdev) + { diff --git a/target/linux/mvebu/patches-3.10/0127-mtd-nand-pxa3xx-Fix-registered-MTD-name.patch b/target/linux/mvebu/patches-3.10/0127-mtd-nand-pxa3xx-Fix-registered-MTD-name.patch new file mode 100644 index 0000000000..b6ae3e62bc --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0127-mtd-nand-pxa3xx-Fix-registered-MTD-name.patch @@ -0,0 +1,48 @@ +From fe013a7a5667763bde164dd5c9341ee5361a9c23 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia +Date: Sat, 19 Oct 2013 18:19:25 -0300 +Subject: [PATCH 127/203] mtd: nand: pxa3xx: Fix registered MTD name + +In a recent commit: + + commit f455578dd961087a5cf94730d9f6489bb1d355f0 + Author: Ezequiel Garcia + Date: Mon Aug 12 14:14:53 2013 -0300 + + mtd: nand: pxa3xx: Remove hardcoded mtd name + + There's no advantage in using a hardcoded name for the mtd device. + Instead use the provided by the platform_device. + +The MTD name was changed to use the one provided by the platform_device. +However, this can be problematic as some users want to set partitions +using the kernel parameter 'mtdparts', where the name is needed. + +Therefore, to avoid regressions in users relying in 'mtdparts' we revert +the change and use the previous one 'pxa3xx_nand-0'. + +While at it, let's put a big comment and prevent this change from happening +ever again. + +Signed-off-by: Ezequiel Garcia +Signed-off-by: Brian Norris +--- + drivers/mtd/nand/pxa3xx_nand.c | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -1320,7 +1320,12 @@ static int pxa3xx_nand_probe(struct plat + for (cs = 0; cs < pdata->num_cs; cs++) { + struct mtd_info *mtd = info->host[cs]->mtd; + +- mtd->name = pdev->name; ++ /* ++ * The mtd name matches the one used in 'mtdparts' kernel ++ * parameter. This name cannot be changed or otherwise ++ * user's mtd partitions configuration would get broken. ++ */ ++ mtd->name = "pxa3xx_nand-0"; + info->cs = cs; + ret = pxa3xx_nand_scan(mtd); + if (ret) { -- 2.30.2