X-Git-Url: https://git.enpas.org/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Fbase-files%2Fetc%2Fdefconfig%2Fwndr3700%2Fnetwork;h=d05fdf34257b6c09afb4a4e2588cf0f0462379d4;hb=db07bdac3e8af612806c4cd7d4a4e46315d9ac4b;hp=3ab4bc81dafb4aa75b3675cbe1e94e73d58d27cf;hpb=e47c4f9d9e5e5fd7ae829fc09a897974cc3ed7a6;p=openwrt.git

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
index 3ab4bc81da..d05fdf3425 100644
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
@@ -5,7 +5,7 @@ config interface loopback
 	option netmask	255.0.0.0
 
 config interface lan
-	option ifname	eth0
+	option ifname	eth0.1
 	option type	bridge
 	option proto	static
 	option ipaddr	192.168.1.1
@@ -19,8 +19,51 @@ config switch
 	option name	rtl8366s
 	option reset	1
 	option enable_vlan 1
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	option blinkrate	2
 
 config switch_vlan
 	option device	rtl8366s
-	option vlan 	0
-	option ports	"0 1 2 3 5"
+	option vlan 	1
+	option ports	"0 1 2 3 5t"
+
+config switch_port
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+
+	option device		rtl8366s
+	option port		1
+	option led		6
+
+config switch_port
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	
+	option device		rtl8366s
+	option port		2
+	option led		9
+
+config switch_port                                              
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+
+	option device		rtl8366s
+	option port		5
+	option led		2