2 * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 /include/ "imx28.dtsi"
16 model = "I2SE Duckbill";
17 compatible = "i2se,duckbill", "fsl,imx28";
20 reg = <0x40000000 0x08000000>;
26 compatible = "fsl,imx28-mmc";
27 pinctrl-names = "default";
28 pinctrl-0 = <&mmc0_8bit_pins_a
29 &mmc0_cd_cfg &mmc0_sck_cfg>;
31 vmmc-supply = <®_3p3v>;
36 pinctrl-names = "default";
37 pinctrl-0 = <&hog_pins_a>;
42 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13, PHY Reset */
44 fsl,drive-strength = <0>;
49 led_pins_a: led_gpio@0 {
52 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
53 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
55 fsl,drive-strength = <0>;
63 duart: serial@80074000 {
64 pinctrl-names = "default";
65 pinctrl-0 = <&duart_pins_a>;
69 usbphy0: usbphy@8007c000 {
80 mac0: ethernet@800f0000 {
82 pinctrl-names = "default";
83 pinctrl-0 = <&mac0_pins_a>;
84 phy-supply = <®_3p3v>;
85 phy-reset-gpios = <&gpio4 13 0>;
86 phy-reset-duration = <100>;
92 compatible = "simple-bus";
95 compatible = "regulator-fixed";
96 regulator-name = "3P3V";
97 regulator-min-microvolt = <3300000>;
98 regulator-max-microvolt = <3300000>;
104 compatible = "gpio-leds";
105 pinctrl-names = "default";
106 pinctrl-0 = <&led_pins_a>;
109 label = "duckbill:green:status";
110 gpios = <&gpio3 5 0>;
114 label = "duckbill:red:status";
115 gpios = <&gpio3 4 0>;