6 model = "FRITZ3370 - Fritz!Box WLAN 3370";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
13 reg = <0x0 0x8000000>;
19 compatible = "gen_nand", "lantiq,nand-xway";
21 reg = <1 0x0 0x2000000>;
27 reg = <0x00000 0x3400000>;
31 label = "vr9_firmware";
32 reg = <0x3400000 0x400000>;
36 reg = <0x3800000 0x3000000>;
40 reg = <0x6800000 0x200000>;
43 label = "nand-filesystem";
44 reg = <0x6a00000 0x1600000>;
49 gpio: pinmux@E100B10 {
50 pinctrl-names = "default";
51 pinctrl-0 = <&state_default>;
53 state_default: pinmux {
55 lantiq,groups = "spi", "spi_cs4";
56 lantiq,function = "gpio";
59 lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24";
60 lantiq,function = "ebu";
61 lantiq,direction = <1>;
65 lantiq,groups = "nand rdy";
66 lantiq,function = "ebu";
67 lantiq,direction = <0>;
68 lantiq,open-drain = <1>;
72 lantiq,groups = "mdio";
73 lantiq,function = "mdio";
76 lantiq,pins = "io37", "io44";
78 lantiq,open-drain = <0>;
92 compatible = "lantiq,xrx200-net";
93 reg = < 0xE108000 0x3000 /* switch */
94 0xE10B100 0x70 /* mdio */
95 0xE10B1D8 0x30 /* mii */
96 0xE10B308 0x30 /* pmac */
98 interrupt-parent = <&icu0>;
102 compatible = "lantiq,xrx200-pdi";
103 #address-cells = <1>;
106 mac-address = [ 00 11 22 33 44 55 ];
109 compatible = "lantiq,xrx200-pdi-port";
112 phy-handle = <&phy0>;
113 gpios = <&gpio 37 0>;
116 compatible = "lantiq,xrx200-pdi-port";
119 phy-handle = <&phy1>;
120 gpios = <&gpio 44 0>;
123 compatible = "lantiq,xrx200-pdi-port";
126 phy-handle = <&phy11>;
129 compatible = "lantiq,xrx200-pdi-port";
132 phy-handle = <&phy13>;
137 #address-cells = <1>;
139 compatible = "lantiq,xrx200-mdio";
140 phy0: ethernet-phy@0 {
142 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
144 phy1: ethernet-phy@1 {
146 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
148 phy11: ethernet-phy@11 {
150 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
152 phy13: ethernet-phy@13 {
154 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
163 lantiq,portmask = <0x3>;
168 #address-cells = <1>;
171 compatible = "spi-gpio";
173 gpio-miso = <&gpio 16 0>;
174 gpio-mosi = <&gpio 17 0>;
175 gpio-sck = <&gpio 18 0>;
176 num-chipselects = <1>;
177 cs-gpios = <&gpio 10 1>;
180 #address-cells = <1>;
182 compatible = "mx25l2005a";
184 linux,modalias = "m25p80", "mx25l2005a";
185 spi-max-frequency = <1000000>;
187 ath9k_cal: partition@0 {
194 reg = <0x20000 0x10000>;
200 reg = <0x30000 0x10000>;
208 compatible = "ath9k,eeprom-mtd";
209 ath,eep-flash = <&ath9k_cal 0x985>;
215 compatible = "lantiq,phy-xrx200";
216 firmware = "lantiq/vr9_phy11g_a1x.bin";
221 compatible = "gpio-keys-polled";
222 #address-cells = <1>;
224 poll-interval = <100>;
228 linux,code = <0x100>;
232 gpios = <&gpio 29 0>;
233 linux,code = <0x101>;
238 compatible = "gpio-leds";
242 gpios = <&gpio 32 1>;
246 gpios = <&gpio 33 1>;
250 gpios = <&gpio 34 1>;
254 gpios = <&gpio 35 1>;
258 gpios = <&gpio 36 1>;
262 gpios = <&gpio 38 1>;
265 label = "info_green";
266 gpios = <&gpio 47 1>;