2 append DRIVERS "atheros"
9 config_get vifs "$device" vifs
12 config_get ifname "$vif" ifname
13 config_set "$vif" ifname "${ifname:-ath}"
15 config_get mode "$vif" mode
21 config_get addr "$vif" bssid
22 config_get ssid "$vif" ssid
23 [ -z "$addr" -a -n "$ssid" ] && {
24 config_set "$vif" wds 1
25 config_set "$vif" mode sta
29 ${addr:+append $mode "$vif"}
31 *) echo "$device($vif): Invalid mode, ignored."; continue;;
35 case "${adhoc:+1}:${sta:+1}:${ap+1}" in
36 # valid mode combinations
38 :1:1)config_set "$device" nosbeacon 1;; # AP+STA, can't use beacon timers for STA
42 *) echo "$device: Invalid mode combination in config"; return 1;;
45 config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${wds:+$wds }"
54 # psk-mixed/tkip => WPA1+2 PSK, TKIP
55 # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP
56 # wpa2/tkip+aes => WPA2 RADIUS, CCMP+TKIP
59 # TODO: move this parsing function somewhere generic, so that
60 # later it can be reused by drivers that don't use hostapd
62 # crypto defaults: WPA2 vs WPA1
64 wpa2*|WPA2*|*PSK2*|*psk2*)
78 # explicit override for crypto setting
80 *tkip+aes|*TKIP+AES|*tkip+ccmp|*TKIP+CCMP) crypto="CCMP TKIP";;
81 *tkip|*TKIP) crypto="TKIP";;
82 *aes|*AES|*ccmp|*CCMP) crypto="CCMP";;
85 # use crypto/auth settings for building the hostapd config
88 config_get psk "$vif" key
89 append hostapd_cfg "wpa_passphrase=$psk" "$N"
92 # FIXME: add wpa+radius here
98 config_get ifname "$vif" ifname
99 config_get bridge "$vif" bridge
100 config_get ssid "$vif" ssid
101 cat > /var/run/hostapd-$ifname.conf <<EOF
104 ${bridge:+bridge=$bridge}
111 hostapd -B /var/run/hostapd-$ifname.conf
117 # kill all running hostapd and wpa_supplicant processes that
118 # are running on atheros vifs
119 for pid in `pidof hostapd wpa_supplicant`; do
120 grep ath /proc/$pid/cmdline >/dev/null && \
127 grep "$device" "$dev/%parent" >/dev/null 2>/dev/null && {
130 wlanconfig "$dev" destroy
137 config_get channel "$device" channel
138 config_get vifs "$device" vifs
140 disable_atheros "$device"
143 config_get ifname "$vif" ifname
144 config_get enc "$vif" encryption
145 config_get mode "$vif" mode
147 [ "$mode" = sta ] && config_get nosbeacon "$device" nosbeacon
149 config_get ifname "$vif" ifname
150 ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon})
152 echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2
155 config_set "$vif" ifname "$ifname"
157 config_get wds "$vif" wds
159 1|on|enabled) wds=1;;
162 iwpriv "$ifname" wds "$wds"
167 for idx in 1 2 3 4; do
168 config_get key "$vif" "key${idx}"
169 iwconfig "$ifname" enc "[$idx]" "${key:-off}"
171 config_get key "$vif" key
172 iwconfig "$ifname" enc "[${key:-1}]"
178 config_get addr "$vif" bssid
179 iwpriv "$ifname" wds_add "$addr"
182 config_get ssid "$vif" ssid
185 iwconfig "$ifname" channel "$channel"
186 ifconfig "$ifname" up
189 net_cfg="$(find_net_config "$vif")"
190 [ -z "$net_cfg" ] || {
191 bridge="$(bridge_interface "$net_cfg")"
192 config_set "$vif" bridge "$bridge"
193 start_net "$ifname" "$net_cfg"
197 hostapd_setup_vif "$vif" madwifi || {
198 echo "enable_atheros($device): Failed to set up wpa for interface $ifname" >&2
199 # make sure this wifi interface won't accidentally stay open without encryption
200 ifconfig "$ifname" down
201 wlanconfig "$ifname" destroy
206 iwconfig "$ifname" essid "$ssid"
207 # FIXME: implement wpa_supplicant calls here
218 config_get type "$dev" type
219 [ "$type" = atheros ] && return
221 config wifi-device $dev
231 option encryption none