2 # Copyright (C) 2006 OpenWrt.org
7 local iftype device iface ifaces ifn
8 for ifn in $interfaces; do
9 config_get iftype "$ifn" type
10 config_get iface "$ifn" ifname
12 bridge) config_get ifaces "$ifn" ifnames;;
14 config_get device "$ifn" device
15 for ifc in $device $iface $ifaces; do
16 [ ."$ifc" = ."$1" ] && {
28 local mode iftype iface ifname device
33 config_set "$2" auto 1
36 config_get iftype "$CONFIG_SECTION" TYPE
39 config_get proto "$CONFIG_SECTION" proto
40 append interfaces "$CONFIG_SECTION"
41 config_get iftype "$CONFIG_SECTION" type
42 config_get ifname "$CONFIG_SECTION" ifname
43 config_set "$CONFIG_SECTION" device "$ifname"
46 config_set "$CONFIG_SECTION" ifnames "$ifname"
47 config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
50 ( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$CONFIG_SECTION'"
54 config_load "${cfgfile:-network}"
60 [ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
61 ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
62 $DEBUG vconfig add "$vif" "${1##*\.}"
66 # Create the interface, if necessary.
67 # Return status 0 indicates that the setup_interface() call should continue
68 # Return status 1 means that everything is set up already.
74 # if we're called for the bridge interface itself, don't bother trying
75 # to create any interfaces here. The scripts have already done that, otherwise
76 # the bridge interface wouldn't exist.
77 [ "br-$config" = "$iface" -o -f "$iface" ] && return 0;
79 ifconfig "$iface" 2>/dev/null >/dev/null && {
80 # make sure the interface is removed from any existing bridge and brought down
81 ifconfig "$iface" down
85 # Setup VLAN interfaces
87 ifconfig "$iface" 2>/dev/null >/dev/null || return 0
90 config_get iftype "$config" type
91 config_get stp "$config" stp
94 [ -x /usr/sbin/brctl ] && {
95 ifconfig "br-$config" 2>/dev/null >/dev/null && {
96 $DEBUG brctl addif "br-$config" "$iface"
97 # Bridge existed already. No further processing necesary
99 $DEBUG brctl addbr "br-$config"
100 $DEBUG brctl setfd "br-$config" 0
101 $DEBUG ifconfig "br-$config" up
102 $DEBUG brctl addif "br-$config" "$iface"
103 $DEBUG brctl stp "br-$config" ${stp:-off}
104 # Creating the bridge here will have triggered a hotplug event, which will
105 # result in another setup_interface() call, so we simply stop processing
106 # the current event at this point.
108 ifconfig "$iface" up 2>/dev/null >/dev/null
122 [ -n "$config" ] || {
123 config=$(find_config "$iface")
124 [ "$?" = 0 ] || return 1
126 proto="${3:-$(config_get "$config" proto)}"
128 prepare_interface "$iface" "$config" || return 0
130 [ "$iface" = "br-$config" ] && {
131 # need to bring up the bridge and wait a second for
132 # it to switch to the 'forwarding' state, otherwise
133 # it will lose its routes...
139 config_get mtu "$config" mtu
140 config_get macaddr "$config" macaddr
141 $DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
142 uci set "/var/state/network.$config.ifname=$iface"
144 pidfile="/var/run/$iface.pid"
147 config_get ipaddr "$config" ipaddr
148 config_get netmask "$config" netmask
149 config_get ip6addr "$config" ip6addr
150 [ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
152 config_get gateway "$config" gateway
153 config_get dns "$config" dns
154 config_get bcast "$config" broadcast
156 [ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
157 [ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
158 [ -z "$gateway" ] || $DEBUG route add default gw "$gateway"
161 grep "$ns" /tmp/resolv.conf.auto 2>/dev/null >/dev/null || {
162 echo "nameserver $ns" >> /tmp/resolv.conf.auto
167 env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug-call "iface" &
170 # prevent udhcpc from starting more than once
171 lock "/var/lock/dhcp-$iface"
172 pid="$(cat "$pidfile" 2>/dev/null)"
173 [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null && {
174 lock -u "/var/lock/dhcp-$iface"
178 config_get ipaddr "$config" ipaddr
179 config_get netmask "$config" netmask
180 config_get hostname "$config" hostname
181 config_get proto1 "$config" proto
182 config_get clientid "$config" clientid
184 [ -z "$ipaddr" ] || \
185 $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
187 # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
188 [ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
189 $DEBUG eval udhcpc -t 0 -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -R &}
190 lock -u "/var/lock/dhcp-$iface"
193 if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
194 eval "setup_interface_$proto '$iface' '$config' '$proto'"
196 echo "Interface type $proto not supported."
207 [ -x /usr/sbin/brctl ] || return 0
208 brctl show | grep "$dev" >/dev/null && {
209 # interface is still part of a bridge, correct that
211 for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do
212 brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null